HGJ-T41G101ANLF 10G RJ45连接器
传感器型号
传感器型号GJC4矿用低浓度甲烷传GJC4 (A)矿用低浓度GRG5H 矿用红外二氧化GPD5矿用压力传感器GFY15矿用风速传感器GJH4(A)红外甲烷传GJI4/100-40 高ZC2000-Z 瓦斯抽放GTH1000 (B)矿用KHD-O. 8Y 压力式断GF15矿用风速传感器IGPD5F 矿用差压传感器GWD100矿用温度传感GFK80矿用风门开闭状GKT5L矿用设备开停传GYH25氣气传感器GFT20矿用风筒状态传GKT127-V 馈电状态 eGUY10矿用本安型液位GCF抽放气体参数传感器DJ4G-Z固定式甲烷断电仪DJ4G-Z固定式甲烷断电仪主机DJ4SZ固定式甲烷断电仪主机是一种适用于煤矿井下各作业场所，为各种传感器提供直流本安电源，并提供甲烷超眼断电抬令，同时可以与KJ76N煤矿安全监控系统.KJ76N-J犷用信息传输授口直授通讯的固定式仪器-仪器具有数字显示、红井线遥控调校功能.能巡回监测四路檯拟号佰号、四路开关宦信号和提供四路断电输岀。
断电点的设定和断电控制万式在系统通讯状态下.由地面计算机设定：作为独立断电仪使用时通过遥控器进行、【防加型式】矿用隅博兼本质安全型・紡爆林志为Exd【2]i【塌入佶号】4路樓拟Jt・凭率20CHz-10C0Hz＜路开关Jft・0・3叽戎无电位节点【基本误差】相当干士0.02乜Hi【忌示方式】囚位L£D【揃入电压】b6CV/380VM任选一种【绥出电压】提保三路本质安全直流电洙一.二掐缶出18V/210g.三路缶岀1GV/27OnA【断电输岀】AC OOOV/O. 3A AC 30V/1A 2^12V DGg?制细岀【工作方式】连红后备电池在满负載状恣下可保壬设棗正常工作2小时〉【外型尺寸及质笊】3COJTF.X220nmx. 1 OOmn 10kgKDG660矿用隔爆兼本安型断电器KDG660矿用隔爆兼本安型断电器KDG660矿用隔擁兼本安型断电器是一种适用于煤矿井下各作业场所，执行甲烷走限断电指令并具有馈电反馈功能的固定式仪器。
MOXA EDS-G4012 系列 Gigabit 网络交换器说明书
EDS-G4012系列12G 連接埠（提供8個802.3bt PoE 連接埠選項）全Gigabit 網管型乙太網路交換器特色與優點•根據IEC 62443-4-1開發並符合IEC 62443-4-2工業網路安全標準•支援IEEE 802.3bt PoE ，各個連接埠的輸出功率高達90W •透過支援高達2.5Gbps 的光纖SFP 插槽提高頻寬能力•Turbo Ring 與Turbo Chain （復原時間<20毫秒@250台交換器），以及透過RSTP/STP 協議支援網路備援•廣泛的電源輸入選項，可提供彈性部署•小巧彈性的外殼設計，適合狹窄的空間•支援MXstudio ，輕鬆實現可視化的工業網路管理認證簡介EDS-G4012系列配備有12個Gigabit 乙太網路連接埠以及最多4個1Gbps 或2.5Gbps 光纖連接埠，因此非常適合用於將現有網路升級至Gigabit 速度，或是建立新的全Gigabit 骨幹。
Gigabit 傳輸速度可增加頻寬以提供更高效能，並且透過三合一服務快速地在網路間傳輸大量資料。
本系列也提供8個10/100/1000BaseT (X)802.3af (PoE)、802.3at (PoE+)和802.3bt 相容乙太網路連接埠，可選擇連接高頻寬PoE 裝置。
備援乙太網路技術如Turbo Ring 、Turbo Chain 和RSTP/STP ，將可增加系統的可靠性，並且改善網路骨幹的可用性。
DS-G4012系列專為應用需求所設計，如視訊與流程監控、ITS 和DCS 系統等，皆可從可擴充的網路骨幹中獲益。
EDS-EDS-G4012系列專為應用需求所設計，如視訊與流程監控、ITS 和DCS 系統等，皆可從可擴充的網路骨幹中獲益。
規格Ethernet Interface10/100/1000BaseT(X)Ports (RJ45connector)EDS-G4012-4GC-HV/-LV/-T models:8Auto MDI/MDI-X connection Auto negotiation speed Full/Half duplex modeCombo Ports (10/100/1000BaseT(X)or 100/1000BaseSFP)EDS-G4012-4GC-LV/-HV/-T models:4PoE Ports (10/100/1000BaseT(X),RJ45connector)EDS-G4012-8P-4QGS-LVA/-LVB/-T models:81000/2500BaseSFP Ports EDS-G4012-8P-4QGS-LVA/-LVB/-T models:4StandardsIEEE 802.3for 10BaseTIEEE 802.3u for 100BaseT(X)and 100BaseFX IEEE 802.3ab for 1000BaseT(X)IEEE 802.3z for 1000BaseX IEEE 802.3bz for 2.5GBaseX IEEE 802.3x for flow controlIEEE 802.3ad for Port Trunk with LACP IEEE 802.1Q for VLAN TaggingIEEE 802.1D-2004for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1p for Class of Service IEEE 802.1X for authenticationEthernet Software FeaturesFilter GMRP,GVRP,GARP,802.1Q VLAN,IGMP Snooping v1/v2/v3,IGMP Querier Management IPv4/IPv6,Flow control,Back Pressure Flow Control,DHCP Server/Client,ARP,RARP,LLDP,Port Mirror,Linkup Delay,SMTP,SNMP Trap,SNMP Inform,SNMPv1/v2c/v3,RMON,TFTP,SFTP,HTTP,HTTPS,Telnet,Syslog,Private MIBMIB P-BRIDGE MIB,Q-BRIDGE MIB,IEEE8021-SPANNING-TREE-MIB,IEEE8021-PAE-MIB,IEEE8023-LAG-MIB,LLDP-EXT-DOT1-MIB,LLDP-EXT-DOT3-MIB,SNMPv2-MIB,RMONMIB Groups1,2,3,9Redundancy Protocols STP,RSTP,Turbo Ring v2,Turbo Chain,Ring Coupling,Dual-Homing,Link Aggregation Security Broadcast storm protection,Rate Limit,Trust access control,Static Port Lock,MACSticky,HTTPS/SSL,SSH,RADIUS,TACACS+,Login and Password PolicyTime Management SNTP,NTP Server/Client,NTP AuthenticationProtocols IPv4/IPv6,TCP/IP,UDP,ICMP,ARP,RARP,TFTP,DNS,NTP Client,DHCP Server,DHCPClient,802.1X,QoS,HTTPS,HTTP,Telnet,SMTP,SNMPv1/v2c/v3,RMON,Syslog Switch PropertiesMAC Table Size16KJumbo Frame Size9.216KBMax.No.of VLANs256VLAN ID Range VID1to4094IGMP Groups512Priority Queues4Packet Buffer Size1MBLED InterfaceLED Indicators PWR1,PWR2,STATE,FAULT,MSTR/HEAD,CPLR/TAIL,SYNCSerial InterfaceConsole Port RS-232(TxD,RxD,GND),8-pin RJ45(115200,n,8,1)USB InterfaceUSB Connector USB Type A(Reserved)Input/Output InterfaceAlarm Contact Channels1,Relay output with current carrying capacity of1A@24VDCDigital Input Channels1Digital Inputs+13to+30V for state1-30to+3V for state0Max.input current:8mAButtons Reset buttonDIP Switch ConfigurationDIP Switches Turbo Ring,Master,Coupler,ReservePower ParametersConnection2removable4-contact terminal block(s)Pre-installed Power Module-LV/-LV-T models:PWR-100–LV-HV/-HV-T models:PWR-105-HV-I-LVA/-LVA-T models:PWR-101-LV-BP-I-LVB/-LVB-T models:PWR-103-LV-VB-INote The EDS-G4012Series supports modular power supplies.The model names and powerparameters are determined by the installed power module.For example:EDS-G4012-4GC-T+PWR-100–LV=EDS-G4012-4GC-LV-TEDS-G4012-4GC-T+PWR-105-HV-I=EDS-G4012-4GC-HV-TIf you install a different power module,refer to the specifications of the correspondingmodel.For example,if you replace the power module of the EDS-G4012-4GC-LV-T withthe PWR-105–HV-I,refer to the specifications of the EDS-G4012-4GC-HV-T.Input Voltage-LV/-LV-T models:12/24/48VDC,Redundant dual inputs-HV/-HV-T models:110/220VDC/VAC,Single input-LVA/-LVA-T models:48VDC,Redundant dual inputs-LVB/-LVB-T models:12/24/48VDC,Redundant dual inputsOperating Voltage-LV/-LV-T models:9.6to60VDC-HV/-HV-T models:88to300VDC,85to264VAC-LVA/-LVA-T models:44to57VDC(>52VDC for PoE+output recommended)-LVB/-LVB-T models:12to57VDC(>52VDC for PoE+output recommended)Input Current-LV/-LV-T models:12-48VDC,1.50-0.40A or24VDC,0.70A-HV/-HV-T models:110-220VAC,50-60Hz,0.30-0.20A or110-220VDC,0.30-0.20A-LVA/-LVA-T models:48VDC,5.42A-LVB/-LVB-T models:12/48VDC,7.46/4.27A or24VDC,7.26APower Consumption(Max.)EDS-G4012-4GC-LV(-T)models:12.68WEDS-G4012-4GC-HV(-T)models:15.8WEDS-G4012-8P-4QGS-LVA(-T)models:Without PoE:15.58WWith PoE:Max.240W for total PD power consumption@48VDC inputEDS-G4012-8P-4QGS-LVB(-T)models:Without PoE:17.96WWith PoE:Max.180W for total PD power consumption@48VDC input;Max.150W for total PD power consumption@24VDC input;Max.62W for total PD power consumption@12VDC inputMax.PoE Power Output per Port90WOverload Current Protection SupportedReverse Polarity Protection SupportedPhysical CharacteristicsIP Rating IP40Dimensions55x140x122.5mm(2.17x5.51x4.82in)Weight EDS-G4012-4GC(-T)models:881.5g(1.94lb)EDS-G4012-8P-4QGS(-T)models:972g(2.14lb)Installation DIN-rail mounting,Wall mounting(with optional kit)Housing MetalEnvironmental LimitsOperating Temperature Standard Models:-10to60°C(14to140°F)Wide Temp.Models:-40to75°C(-40to167°F)Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsIndustrial Cybersecurity IEC62443-4-1IEC62443-4-2Safety UL61010-2-201,EN62368-1(LVD)EMC EN55032/35,EN61000-6-2/-6-4EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:8kV;Air:15kVIEC61000-4-3RS:80MHz to1GHz:20V/mIEC61000-4-4EFT:Power:4kV;Signal:4kVIEC61000-4-5Surge:Power:4kV;Signal:4kVIEC61000-4-6CS:10VIEC61000-4-8PFMFVibration IEC60068-2-6Shock IEC60068-2-27Freefall IEC60068-2-32Railway EN50121-4Traffic Control NEMA TS2MTBFTime EDS-G4012-4GC-HV/HV-T:456,870hrsEDS-G4012-4GC-LV/LV-T:867,981hrsEDS-G4012-8P-4QGS-LVA/LVA-T:799,780hrsEDS-G4012-8P-4QGS-LVB/LVB-T:759,924hrsStandards Telcordia SR332WarrantyWarranty Period5yearsDetails See /tw/warrantyPackage ContentsDevice1x EDS-G4012Series switchDocumentation1x quick installation guide1x product notice,Simplified Chinese1x product certificates of quality inspection,Simplified Chinese1x warranty card尺寸訂購資訊Model Name10/100/1000BaseT(X)Ports,RJ45ConnectorCombo Ports(10/100/1000BaseT(X)or100/1000BaseSFP)PoE10/100/1000BaseT(X)Ports,RJ45Connector100/1000/2500BaseSFPPortsOperatingVoltagePre-installedPower ModuleOperatingTemp.EDS-G4012-4GC-LV84––9.6to60VDC PWR-100-LV-10to60°C EDS-G4012-4GC-LV-T84––9.6to60VDC PWR-100-LV-40to85°CEDS-G4012-4GC-HV84––88to300VDC,85to264VACPWR-105-HV-I-10to60°CEDS-G4012-4GC-HV-T84––88to300VDC,85to264VACPWR-105-HV-I-40to85°CEDS-G4012-8P-4QGS-LVA ––8444to57VDC(>52VDC for PoE+inputrecommended)PWR-101-LV-BP-I-10to60°CEDS-G4012-8P-4QGS-LVA-T ––8444to57VDC(>52VDC for PoE+inputrecommended)PWR-101-LV-BP-I-40to85°CEDS-G4012-8P-4QGS-LVB ––8412to57VDC(>52VDC for PoE+inputrecommended)PWR-103-LV-VB-I-10to60°CEDS-G4012-8P-4QGS-LVB-T ––8412to57VDC(>52VDC for PoE+inputrecommended)PWR-103-LV-VB-I-40to85°C配件（選購）SFP ModulesSFP-1GEZXLC SFP module with11000BaseEZX port with LC connector for110km transmission,0to60°C operatingtemperatureSFP-1GEZXLC-120SFP module with11000BaseEZX port with LC connector for120km transmission,0to60°C operatingtemperatureSFP-1GLHLC SFP module with11000BaseLH port with LC connector for30km transmission,0to60°C operatingtemperatureSFP-1GLHXLC SFP module with11000BaseLHX port with LC connector for40km transmission,0to60°C operatingtemperatureSFP-1GLSXLC SFP module with11000BaseLSX port with LC connector for1km/2km transmission,0to60°C operatingtemperatureSFP-1GLXLC SFP module with11000BaseLX port with LC connector for10km transmission,0to60°C operatingtemperatureSFP-1GSXLC SFP module with11000BaseSX port with LC connector for300m/550m transmission,0to60°Coperating temperatureSFP-1GZXLC SFP module with11000BaseZX port with LC connector for80km transmission,0to60°C operatingtemperatureSFP-1GLHLC-T SFP module with11000BaseLH port with LC connector for30km transmission,-40to85°C operatingtemperatureSFP-1GLHXLC-T SFP module with11000BaseLHX port with LC connector for40km transmission,-40to85°C operatingtemperatureSFP-1GLSXLC-T SFP module with11000BaseLSX port with LC connector for1km/2km transmission,-40to85°Coperating temperatureSFP-1GLXLC-T SFP module with11000BaseLX port with LC connector for10km transmission,-40to85°C operatingtemperatureSFP-1GSXLC-T SFP module with11000BaseSX port with LC connector for300m/550m transmission,-40to85°Coperating temperatureSFP-1GZXLC-T SFP module with11000BaseZX port with LC connector for80km transmission,-40to85°C operatingtemperatureSFP-1G10ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G10BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G20ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G20BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G40ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G40BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G10ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G10BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1G20ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G20BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1G40ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G40BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1FELLC-T SFP module with1100Base single-mode with LC connector for80km transmission,-40to85°Coperating temperatureSFP-1FEMLC-T SFP module with1100Base multi-mode,LC connector for2/4km transmission,-40to85°C operatingtemperatureSFP-1FESLC-T SFP module with1100Base single-mode with LC connector for40km transmission,-40to85°Coperating temperatureSFP-2.5GSLHLC-T SFP module with12.5GBaseFX port with LC connector,single-mode,for45km transmission,-40to85°C operating temperatureSFP-2.5GSLC-T SFP module with12.5GBaseFX port with LC connector,single-mode,for5km transmission,-40to85°Coperating temperatureSFP-2.5GMLC-T SFP module with12.5GBaseFX port with LC connector,multi-mode,for170,200,550,600mtransmission,-40to85°C operating temperatureSFP-2.5GLSLC-T SFP module with12.5GBaseFX port with LC connector,single-mode,for20km transmission,-40to85°C operating temperaturePower SuppliesHDR-60-2460W/2.5A DIN-rail24VDC power supply,universal85to264VAC or120to370VDC input voltage,-30to70°C operating temperatureNDR-120-24120W/5.0A DIN-rail24VDC power supply,universal90to264VAC or127to370VDC input voltage,-20to70°C operating temperatureNDR-120-48120W/2.5A DIN-rail48VDC power supply,universal90to264VAC or127to370VDC input voltage,-20to70°C operating temperatureNDR-240-48240W/5.0A DIN-rail48VDC power supply,universal90to264VAC or127to370VDC input voltage,-20to70°C operating temperatureMDR-40-24DIN-rail24VDC power supply with40W/1.7A,85to264VAC,or120to370VDC input,-20to70°Coperating temperatureMDR-60-24DIN-rail24VDC power supply with60W/2.5A,85to264VAC,or120to370VDC input,-20to70°Coperating temperature©Moxa Inc.版權所有.2022年2月10日更新。
NETGEAR 1G SFP 交换机用户指南说明书
InstallationConnect the Switch to Your NetworkDuring initial setup, you must connect the switch to a network that you can access with a local WiFi connection.For Gigabit connections, use Category 5e (Cat 5e) or higher-rated Ethernet cables terminated with RJ-45 connectors.To use an SFP port, you must insert a 1G SFP transceiver module, which is available from NETGEAR. ¾To connect the switch:1. Connect devices to the network ports on the switch.2. Connect the switch to the network.3. Make sure that the switch is connected to your WiFi accessible network(required for initial setup) and the Internet (required for remote monitoring and management).4. Power on the switch and wait for two or three minutes.The Power LED lights green, indicating that switch completed its startup process and is available on the network.The switch receives an IP address from a DHCP server (or a router that functions as a DHCP server) in your network. If your network does not include a DHCP server, the switch uses 192.168.0.239 as its default IP address.5. To check the port connections from the switch to the powered-ondevices that you connected, do the following:• Make sure that the Ethernet cables are plugged in correctly.• Check the left LED for each port on the switch.The left port LED lights solid green to indicate a valid connection to a powered-on device and blinks green to indicate traffic on this port.NETGEAR Insight Managed8-Port Gigabit Ethernet PoE+ Smart Cloud Switch with 2 SFP Fiber Ports (GC510P)8-Port Gigabit Ethernet High-Power PoE+ Smart Cloud Switch with 2 SFP Fiber Ports (GC510PP)Package ContentsUnpack the box and verify the contents:• Switch model GC510P or GC510PP • Power cord (localized to the country of sale)• Wall-mount kit with screws for wall installation•Rack-mount kit with brackets and screws for rack-mounting • Four rubber footpads for tabletop installation • Installation guideAccess the Switch for ConfigurationThe NETGEAR Insight app lets you use your mobile device to discover,configure, manage, and monitor your switch. You can use this app to access the switch with a local WiFi connection or through the cloud.Local WiFi access . During initial configuration, you must use this method. The switch must be connected to a WiFi access point (because the switch does not provide WiFi capacity). Connect your mobile device to that access point’s WiFi network.Cloud access . After initial configuration, as long as your switch is on a network with an Internet connection, you can access the switch through the cloud.Configure the Switch Using the NETGEAR Insight AppBy default, the switch receives an IP address from a DHCP server (or a router that functions as a DHCP server) in your network. If your network does not include a DHCP server, the switch uses 192.168.0.239 as its default IP address. The NETGEAR Insight app lets you discover, configure, manage, and monitor your switch.Note: You can also connect to the switch in the traditional way, using a computer and a web browser. For more information, visit /support/product/GC510P (or GC510PP) and search for “Configure the switch using a web browser”.Sample connectionsFront panel models GC510P and GC510PP(Continued on the next page)InsightSeptember 2017© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.NETGEAR, Inc.350 East Plumeria DriveSan Jose, CA 95134, USANETGEAR INTL LTDBuilding 3, University Technology Centre Curraheen Road, Cork, IrelandSupportThank you for purchasing this NETGEAR product. You can visit/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources.Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à /other/.(If this product is sold in Canada, you can access this document in Canadian-French at /other/.)For the current EU Declaration of Conformity, visit/app/answers/detail/a_id/11621/.For regulatory compliance information, visit /about/regulatory/.See the regulatory compliance document before providing power to the switch.Troubleshooting TipsHere are some tips for correcting simple problems that might occur:• If you cannot connect with the NETGEAR Insight app to the switch,make sure that your mobile device and the switch are connected to the same WiFi network.• Make sure that the Ethernet cables are plugged in correctly and that foreach powered-on device connected to the switch, the corresponding left port LED on the switch either lights solid green (indicating a valid connection) or blinks green (indicating that traffic is being processed).• Make sure that the PoE Max LED is off. Model GC510P provides a totalpower budget of 134 watts. Model GC510PP provides a total power budget of 195 watts. If the PoE Max LED is solid amber, disconnect one or more powered devices (PDs) to prevent PoE oversubscription. Start by disconnecting the PD from the highest-numbered port.Note: You can also access the web browser-based management interface of the switch to manually override the amount of power that is reserved for each PoE port and attached PD. For more information, see the user manual, which you can download by visiting /support/product/GC510P or /support/product/GC510PP .• For each powered PD that is connected to the switch, thecorresponding left port LED on the switch either lights solid green (indicating a valid connection) or blinks green (indicating that traffic is being processed), and the corresponding right port LED on the switch lights solid green (indicating that PoE is being delivered to the PD). If the right port LED lights solid amber, a PoE fault occurred. For more information, see the user manual, which you can download by visiting/support/product/GC510P or /support/product/GC510PP .¾To configure the switch:1. On your iOS or Android mobile device, go to the app store, search forNETGEAR Insight, and download the app.2. If the switch is directly connected to a WiFi router or access point (seeStep 4, Option 1, in Connect the Switch to Your Network ), connect your mobile device to the WiFi network of the router or access point.3. Open the NETGEAR Insight app.4. Select LOG IN to log in to your existing NETGEAR account or tap theCREATE NETGEAR ACCOUNT button to create a new account.5. After you log in to your account, name your network and specify adevice admin password that applies to all devices that you add to this network.When you are done, tap the NEXT button.6. You can now add a device. Choose one of the following options:• Type in the serial number.•Scan the serial number bar code.• Tap Switch as the device type and follow the prompts to scan the network or scan the QR code.Note : Screens might display and suggest that you connect the switch to power and to an uplink. Since you already did this (see Connect the Switch to Your Network ), on these screens, tap the NEXT button.7. If the switch is not yet connected to the same WiFi network as yourmobile device, connect it now to the same WiFi network, wait two minutes, and then tap the NEXT button.8. After the switch is discovered and registered on the network, select theswitch to configure and manage it through the NETGEAR Insight app.For more information on how to connect a NETGEAR Insight managed switch to an existing network, visit https:///000044341.Insight Insight。
10GX盾屏RJ45接合器，类别6A，KeyConnect，灰色说明书
0.160
58.100 59.080
47.200 51.200
100.000 0.200
0.200
54.000 55.000
43.100 47.100
200.000 0.280
0.280
48.000 48.980
37.100 41.100
250.000 0.320
0.320
46.000 47.040
TIA* (dB) Belden** (dB) TIA* (dB) Belden** (dB) TIA* (dB) Belden** (dB) TIA* (dB)
Belden** (dB)
1.000
30.000
30.000
70.500
72.000
67.000
72.000
40.000
45.000
4.000 8.000 10.000
Mated Connection Table 2:
Frequency Min.
Min.
Min.
Min.
Min.
Min.
Min.
Min.
(MHz)
Return Loss Return Loss PSANEXT PSANEXT PSAACRF PSAACRF Balanced TCL Balanced TCL
66.000 64.000 62.500
22.000 20.000 18.500
32.000 30.000 28.500
400.000 500.000 625.000
16.000 14.000
16.000 14.000 12.100
58.500 56.500
60.000 58.000 56.100
戈尔-哈丁RJ45连接器系统的组装和端接说明说明书
The following procedures are based on Gore’s best practices for terminating GORE ® Aerospace Ethernet Cables with the Harting RJ45 Connector System.Following these procedures will enable you to maximize the performance of your assembly, particularly for Cat6a protocol. These procedures should be used as a guide in conjunction with current connector manufacturing instructions.Preparing the Cable and Parts1. Gather the tools and materials required for assembly and termination (Figures 1–4).2. Verify that you have the correct parts for your assembly by checking the part numbers for the connectors and the GORE ® Aerospace Ethernet Cables listed on your drawing.3. Cut two 1.5-inch pieces of 0.5-inch yellow RNF-100 heat-shrink sleeving for environmental protection.4. Cut the cable to the desired assembly length minus 1.4 inches to allow for the length of the connectors that you are terminating (i.e., 0.7 inches for each connector).5. Print any labels required by the end-user.HARTING RJ INDUSTRIAL ® 10G RJ45 CONNECTOR SYSTEMFigure 1: Needle nose pliers and scalpelFigure 3: Cutters Figure 4: Heat gunFigure 2: Soft jaw pliers1. Loosen the retaining nut on the black housing and slide the round end onto the cable. Then, slidethe labels, yellow heat-shrink sleeving, and black housing from the connector kit onto the cable (Figure 5). There may be other items to slide onto the connector as well; therefore, be sure to slideall items that cannot be slipped over the connector once the plugs are installed.2. Measure and mark the jacket 1.1 inches from the working end of cable.3. Using a scalpel or work knife, remove the outer jacket at the mark.4. Wrap the tape around the cable so that there is 0.70 inches of braid showing (Figure 6).5. Remove the braid so that it is flush with the tape (Figure 7).6. Using cutters, cut the foil edge where it meets the tape (Figure 8). Tear the foil along the tape edge.7. Trim the white filler between the exposed pairs as much as possible.8. Starting with the bottom row, insert the wires into the connector according to the following diagram (Figures 9 – 10).Terminating the Connector (both ends)Figure 5: Attaching the labels, sleeving and black housingFigure 6: Wrapping the tapeFigure 7: Removing the braidFigure 9: Wire positions inside connectorFigure 10: Inserting wires in bottom rowFigure 8: Tearing the foil876521432 Termination Instructions for Glenair El Ochito® Connector SystemTermination Instructions for Glenair El Ochito ® Connector System 39. Ensure the bottom row of wires are inserted well past the opening for the contacts (Figure 11).10. Insert the top row of wires into the connectoraccording to the diagram (Figure 12).11. Using cutters, cut the top row of wires flush withthe edge of the top row on the connector (Figure 13). This will prevent the top wires from shorting to the bottom wires.12. Using soft jaw pliers, gently push down the toppart of the connector and snap into place (Figures 14 – 15).13. With fingers, gently remove the tape from thebraid.14. Insert the metal EMI shell onto the bottom of theconnector and click into place (Figure 16).Figure 14: Pushing the top part of connectorFigure 15: Snapping the top part of connectorFigure 16: Inserting the metal EMI shellFigure 11: Wires inserted in position in bottom rowFigure 12: Wires inserted in position in top rowFigure 13: Cutting the top row of wiresA C S -0300-R 1-R E F -U S -M A R 22NOTICE — USE RESTRICTIONS APPLY. Not for use in food, drug, cosmetic or medical device manufacturing, processing, or packaging operations.HARTING RJ Industrial is a registered trademark of HARTING Technology Group. Fluke Networks is a registered trademark of Fluke Corporation.GORE, Together, improving life , and designs are trademarks of W. L. Gore & Associates. © 2022 W. L. Gore & Associates, Inc.W. L. Gore & Associates, 15. Pull up the black housing over the connector andclick into place. Then, tighten the retaining nut as far as it will go (Figure 17).16. Slide the yellow RNF-100 heat-shrink sleeving upand over the back of the retaining nut. Then, using a heat gun, shrink the sleeving into place (Figure 18).Figure 18: Shrinking sleeving on retaining nutFigure 17: Tightening the retaining nuts17. Perform all required testing. At a minimum, verifyproper wiring and continuity, and check for shorts. Local authorities and end-users may requireadditional testing. Gore recommends testing the final assembly using an advanced signal Integrity tester such as the Fluke Networks ® DSX-5000 or equivalent.。
XG4系类连接器
Industry Standard Circuit BoardConnectors Conform to MIL Standards•XG4M-U: Unique locking system, with lock levers on strain relief / socket instead of on plug, saves 24% of space •Space-saving Box-type Plugs (XG4C) available.•Can be used with XG5 IDC Connectors for discrete wires, XG8 Original PCB Plugs, and the XG2 IDC Bus Connectors for PCBs.•The Original Plugs (XG8) and the Box-type Plugs (XG4C) can be locked using External XG5Z and XG4Z Lock Levers.•Conforms to MIL standards (MIL-C-83503).•UL recognition (file No. E103202)Note:1.XG4M can be provided with or without the strain reliefs;⇒ XG4M-U consists of XG4M-@@3@ socket +XG4U-@@04 strain relief⇒ XG4M-T consists of XG4M-@@3@ socket + XG4T -@@04 strain relief 2.XG4H PCB mount socket mates with XG4C and XG8W (see XG8 Datasheet) for board to board connectivity without cables.3.XG5 connectors (see XG5 Datasheet) use discrete wire instead of flat ribbon cable.4.XG4A PCB mount sockets are available with Long, Short or no Lock Levers.5.Optional XG4Z-001@ side-lock levers, purchased separately, are available for use with right-angle XG4A versions that don’t include them.6.Optional XG4Z-0002 and XG5Z-0002 top-lock levers are available for mating XG4M(-T) sockets to XG4C and XG8 plugs.■Ratings and CharacteristicsItemMIL Sockets: XG4M Cable Plug: XG4EMIL Plugs: XG4ABox-type PCB Plugs: XG4C Board to Board Sockets: XG4HRated current 1 A 3 A (See note 1.)Rated voltage250 VAC 300 VAC Contact resistance 20 m Ω max. (at 20 mV , 100 mA max.)Insulation resistance 1,000 M Ω min. (at 500 VDC)Dielectric strength 500 VAC for 1 min (leakage current: 1 mA max.)Connector insertion 1.96 N max. per contactNote:1.The rated current will depend on theSocket you are using. It is 1 A using the XG4M for example.2.For standard 0.15-μm gold plating.Contact removal 0.39 N min. (with test gauge, t= 0.64 mm)Insertion durability 50 times (See note 2.)Ambient temperatureOperating: –55 to 105°C (with no icing)■Materials and FinishNote:For non-standard plating, contact your OMRON representative.■Applicable Wires1.27-mm pitch, 7-strand flat cable •UL2651(standard cable)•UL20012 (folding cable)•UL20028 (color-coded cable)Mating Combinations for XG4, XG5 and XG8ItemMIL Plugs: XG4A Box-type Plugs: XG4C Cable Plugs: XG4E (Strain Relief: XG4S)MIL Sockets: XG4M (Strain Relief: XG4T)Board-to-board Connector: XG4H Housings Fiber-glass reinforced PBT resin (UL94V-0)/black Covers —Polyamide resin (UL94V-0)/black Fiber-glass reinforced PBT resin (UL94V-0)/black—ContactsMating endBrass/nickel base, 0.15-μm gold plating (See note.)Phosphor bronze/nickel base, 0.15-μm gold plating (See note.)T erminal Press fitBrass/nickel base, tin plating Phosphor bronze/nickel base, tin plating Strain Reliefs—Polyamide resin (UL94V-0)/black Fiber-glass reinforced PBT resin (UL94V-0)/black—Mating Diagrams for XG4MXG4U + XG4M + XG4C(With straight terminals)XG4T + XG4M + XG4AXG4T + XG4M, + XG4C +XG4Z Lock LeverCable Mount Connectors■XG4M-U Sockets (Uses XG4U Strain Relief with Lock Levers)DimensionsOrdering InformationNote:1.Sets include the connector and strain relief.2.With open-end cover.3.Strain Relief sold separately.4.Polarity guide pitch is 22.86 mm.XG4U-@@04XG4M-XG4M-Mating Diagrams for XG4M-U(Locked)■XG4M-T Sockets (Uses XG4T Strain Relief without Lock Levers)DimensionsOrdering InformationNote:1.Sets include the connector and strain relief.2.With open-end cover.3.Strain Relief sold separately.4.Polarity guide pitch is 22.86 mmStrain reliefOpen-end coverT rian g ular markPolarizin g Key slot (2) (Not on models with less than 14 contacts.)Polarity g uide Polarizin g Key slot (1)XG4M-@@30 (one polarizing guide)XG4M-@@31 (all others)XG4T-@@04Strain ReliefNo of contactsDimensions (mm)A B 1017.310.161422.315.241624.917.782030.022.862637.630.483042.735.563447.740.644055.448.265068.160.966080.873.666485.878.74No. ofcontactsNo. of polarity guidesSocket+Strain Relief Set (See notes 1 and 2.)Socket with Open-end Cover (See note 3.)Strain Relief for the XG4M100XG4M-1031-T XG4M-1031XG4T -10041XG4M-1030-T XG4M-1030141XG4M-1430-T XG4M-1430XG4T -1404161XG4M-1630-T XG4M-1630XG4T -1604201XG4M-2030-T XG4M-2030XG4T -2004261XG4M-2630-T XG4M-2630XG4T -2604301XG4M-3030-T XG4M-3030XG4T -3004341XG4M-3430-T XG4M-3430XG4T -3404401XG4M-4030-T XG4M-4030XG4T -4004501XG4M-5030-T XG4M-5030XG4T -50042 (See note 4.)XG4M-5031-T XG4M-5031601XG4M-6030-T XG4M-6030XG4T -60042 (See note 4.)XG4M-6031-T XG4M-6031641XG4M-6430-TXG4M-6430XG4T -64042 (See note 4.)XG4M-6431-TXG4M-6431■XG4E Plugs and XG4S Strain Relief (Locking Levers on Connector)Dimensions(Lon g locks)(Short locks)0.635 × 0.635Open-end cover0.635 × 0.635Strain ReliefTwo, 2.6 dia.(M3 tappin g screw hole)Two, 2.65 dia.Trian g ularmarkPolarizin g Key slot(Not on models with less than 14 contacts.)Polarity slot Polarizin g Key slot XG4E-@@31/-@@71(With long locks)XG4E-@@32/-@@72(With short locks)DimensionsNote:See the “Polarity Slot and Polarizing Key Slot Number and Position” section fordetails on the availability (10-contact Connectors) and pitch (with 50, 60, or 64-contact Connectors) of polarity slots.No. of contactsDimensions (mm)ABCDEF GLong LockShort Lock 1032.017.510.1621.827.946.440.416.91437.122.615.2426.933.051.545.522.01639.625.217.7829.535.654.146.024.62044.730.222.8634.540.659.153.129.62652.337.930.4842.248.366.860.738.03057.442.935.5647.253.371.865.842.33462.548.040.6452.358.476.970.947.44070.155.648.2659.966.084.578.555.05082.868.360.9672.678.797.291.267.76095.581.073.6685.391.4109.9103.980.464100.686.178.7490.496.5115.0109.085.5XG4S-@@04Strain ReliefOrdering InformationUse Long-lock Plugs to mate with XG4M-T Strain-relief Sockets, and use Short-lock Plugs to mate with XG4M that does not have a strain relief installed.Note:1.Strain Relief sold separately.2.Polarity slot pitch is 22.86 mm.Cable Numbers and Contact PositionNo. of contactsNo. of polarizing slotsLong-lock Plugs with Open-end Cov-ers (See note 1.)Short-lock Plugs with Open-end Covers (See note 1.)Strain Reliefs for XG4E100XG4E-1071XG4E-1072XG4S-10041XG4E-1031XG4E-1032141XG4E-1431XG4E-1432XG4S-1404161XG4E-1631XG4E-1632XG4S-1604201XG4E-2031XG4E-2032XG4S-2004261XG4E-2631XG4E-2632XG4S-2604301XG4E-3031XG4E-3032XG4S-3004341XG4E-3431XG4E-3432XG4S-3404401XG4E-4031XG4E-4032XG4S-4004501XG4E-5031XG4E-5032XG4S-50042 (See note 2.)XG4E-5071XG4E-5072601XG4E-6031XG4E-6032XG4S-60042 (See note 2.)XG4E-6071XG4E-6072641XG4E-6431XG4E-6432XG4S-64042 (See note 2.)XG4E-6471XG4E-6472Socket (mated side)Ri g ht-an g le T erminal Plu g (terminal side)Plu g (XG4E)Strai g ht T erminal Plu g (terminal side)T rian g ular markCable mark Cable No.XG4A XG4CT rian g ular mark (back)T rian g ular markT rian g ular markCable mark Cable No.Cable and Corresponding Contact NumberThe contact numbers are not marked on the Connector. Use the triangular mark as a guide when wiring and designing circuit boards.For the cable number, count starting from the cable mark side as shown on the right.PCB Mount Connectors■XG4A Plugs with Long Lock leversDimensionsStrai g ht DIP terminals Ri g ht-an g le DIP terminals0.635 × 0.6350.635 × 0.635Strai g ht DIP terminals Ri g ht-an g le DIP terminalsTwo, 2.6 dia.(M3 tappin g screw hole)Two, 2.65 dia.Trian g ularmarkPolarizin g Key slot(not on models withless than 14 contacts)Polarity slotPolarizin g Key slotMountin g view (bottom view)Ri g ht-an g le terminals0.8 dia. (DIP terminals)Two, 2.8 dia.(M2.6)Two, 3.2 dia.(M3 tappin gscrew hole)Strai g ht terminals0.8 dia. (DIP terminals)Two, 3.2 dia.(M3 tappin gscrew hole)XG4A-@@31/-@@71 (With straight DIP terminals)XG4A-@@34/-@@74 (With right-angle DIP terminals)Note:See the “Polarity Slot and Polarizing Key Slot Number andPosition” section for details on the availability (10-contactConnectors) and pitch (with 50, 60, or 64-contact Connectors)of polarity slots.No. ofcontactsDimensions (mm)A B C D E F1032.017.510.1621.827.946.41437.122.615.2426.933.051.51639.625.217.7829.535.654.12044.730.222.8634.540.659.12652.337.930.4842.248.366.83057.442.935.5647.253.371.83462.548.040.6452.358.476.94070.155.648.2659.966.084.55082.868.360.9672.678.797.26095.581.073.6685.391.4109.964100.686.178.7490.496.5115.0Ordering InformationUse in Combination with XG4M-T cable mount Sockets with strain relief or XG5M Sockets for discrete wire.Note:Polarizing slot pitch is 22.86 mm.No. ofcontactsNo. of polarizing slotsPlugs with straight DIP terminalsPlugs with right-angle DIP terminals100XG4A-1071XG4A-10741XG4A-1031XG4A-1034141XG4A-1431XG4A-1434161XG4A-1631XG4A-1634201XG4A-2031XG4A-2034261XG4A-2631XG4A-2634301XG4A-3031XG4A-3034341XG4A-3431XG4A-3434401XG4A-4031XG4A-4034501XG4A-5031XG4A-50342 (See note.)XG4A-5071XG4A-5074601XG4A-6031XG4A-60342 (See note.)XG4A-6071XG4A-6074641XG4A-6431XG4A-64342 (See note.)XG4A-6471XG4A-6474■XG4A Plugs with Short LocksDimensionsStrai g ht DIP terminals Ri g ht-an g le DIP terminals0.635 × 0.6350.635 × 0.635Strai g ht DIP terminals Ri g ht-an g le DIP terminalsMountin g holes (bottom view)Ri g ht-an g le terminalsStrai g ht terminalsTwo, 2.6 dia.(M3 tappin g screw hole)Two, 2.65 dia.Polarizin g Key slot (not on models with less than 14 contacts)Trian g ular markPolarity slotPolarizin g Key slot0.8 dia. (DIP terminals)00.8 dia. (DIP terminals)0Two, 2.8 dia.(M2.6)Two, 3.2 dia. (M3 tappin g screw hole)Two, 3.2 dia.(M3 tappin g screw hole)XG4A-@@32/-@@72 (With straight DIP terminals)XG4A-@@35/-@@75 (With right-angle DIP terminals)Note:See the “Polarity Slot and Polarizing Key Slot Number andPosition” section for details on the availability (10-contact Connectors) and pitch (with 50, 60, or 64-contact Connectors)of polarity slots.No. of contacts Dimensions (mm)A B C D E F 1032.017.510.1621.827.940.41437.122.615.2426.933.045.51639.625.217.7829.535.648.02044.730.222.8634.540.653.12652.337.930.4842.248.360.73057.442.935.5647.253.365.83462.548.040.6452.358.470.94070.155.648.2659.966.078.55082.868.360.9672.678.791.26095.581.073.6685.391.4103.964100.686.178.7490.496.5109.0Ordering InformationUse in Combination with XG4M cable mount Sockets without strain relief.Note:Polarizing slot pitch is 22.86 mm.No. ofcontactsNo. of polarizing slotsPlugs with straight DIP terminalsPlugs with right-angle DIP terminals100XG4A-1072XG4A-10751XG4A-1032XG4A-1035141XG4A-1432XG4A-1435161XG4A-1632XG4A-1635201XG4A-2032XG4A-2035261XG4A-2632XG4A-2635301XG4A-3032XG4A-3035341XG4A-3432XG4A-3435401XG4A-4032XG4A-4035501XG4A-5032XG4A-50352 (See note.)XG4A-5072XG4A-5075601XG4A-6032XG4A-60352 (See note.)XG4A-6072XG4A-6075641XG4A-6432XG4A-64352 (See note.)XG4A-6472XG4A-6475■XG4A Plugs without Lock LeversNote:XG4Z-001@ Lock Levers that can be installed after PCB assembly may be purchased separately. (See the following page.)DimensionsStrai g ht DIP terminals Ri g ht-an g le DIP terminals0.635 × 0.6350.635 × 0.635Strai g ht DIP terminals Ri g ht-an g le DIP terminalsT wo, 2.6 dia.(M3 tappin g screw hole)T wo, 2.65 dia.Polarizin g Key slot (not on models with less than 14 contacts)Polarity slotPolarizin g Key slotT rian g ular markMountin g holes (bottom view)Ri g ht-an g le terminalsStrai g ht terminals0.8 dia. (DIP terminals)00.8 dia. (DIP terminals)0T wo, 2.8 dia. (M2.6)T wo, 3.2 dia. (M3 tappin g screw hole)T wo, 3.2 dia.(M3 tappin g screw hole)XG4A-@@33/-@@73 (With straight DIP terminals)XG4A-@@36/-@@76 (With right-angle DIP terminals)Note:See the “Polarity Slot and Polarizing Key Slot Number andPosition” section for details on the availability (10-contact Connectors) and pitch (with 50, 60, or 64-contact Connec-tors) of polarity slots.No. of contacts Dimensions (mm)A B C D E 1032.017.510.1621.827.91437.122.615.2426.933.01639.625.217.7829.535.62044.730.222.8634.540.62652.337.930.4842.248.33057.442.935.5647.253.33462.548.040.6452.358.44070.155.648.2659.966.05082.868.360.9672.678.76095.581.073.6685.391.464100.686.178.7490.496.5Ordering InformationNote:Polarity slot pitch is 22.86 mm.■Lock Levers for XG4A-@@3@/7@Attachment after Soldering•Long Levers interfere with automated mounting.•Long Levers are in the way when boards are packed.↓•These problems are resolved using Connectors with Long Levers that can be attached after soldering is completed.•These versions of the XG4A connector allows you to attach LockLevers on Right-angle Terminal Plugs after automated soldering iscompleted.•Lock Levers can be easily mounted simply by manually pushing them in.•Lock Levers can be used with either Straight or Right Angle versions of the XG4A.Ordering InformationNote:1.The left and right Lock Levers are identical. One pair isneeded for each Plug.e Long Lock Levers when mating XG4A plug to XG4M-T cable mount socket with strain relief or XG5M sockets for discrete wires.e Short Lock Levers when mating XG4A plug to XG4M without strain relief attached.No. of contactsNo. of polarizing slotsPlugs with straight DIP terminalsPlugs right-angle DIP terminals100XG4A-1073XG4A-10761XG4A-1033XG4A-1036141XG4A-1433XG4A-1436161XG4A-1633XG4A-1636201XG4A-2033XG4A-2036261XG4A-2633XG4A-2636301XG4A-3033XG4A-3036341XG4A-3433XG4A-3436401XG4A-4033XG4A-4036501XG4A-5033XG4A-50362 (See note.)XG4A-5073XG4A-5076601XG4A-6033XG4A-60362 (See note.)XG4A-6073XG4A-6076641XG4A-6433XG4A-64362 (See note.)XG4A-6473XG4A-6476TypeModelMin. orderLong Lock Levers XG4Z-001020Short Lock LeversXG4Z-0011Slim Long Lock Levers XG4Z-0012Slim Short Lock Levers XG4Z-0013XG4Z-0010 Lon g Lock LeverXG4Z-0011 Short Lock Lever■XG4A 2-tier Plugs with Long Lock LeverDimensionsOrdering InformationNote:es in a set with stopper and screws included.2.Polarizing slot pitch is 22.86 mm.Mountin g holes (bottom view)0.635 × 0.635Two, 2.65 dia.StopperTwo, 2.65 dia.Trian g ular markPolarizin g Key slot (not on models with less than 14 contacts)Polarity slotPolarizin g Key slot (not on the XG4A-1039-A)0.8 dia.0Two, 2.8 dia.XG4A-@@39-A/-@@79-A(With long locks and right-angle DIP terminals)Note:Polarizing slot pitch is 22.86 mm for 50-,60-, and 64-contact Connectors.No. of contacts Dimensions (mm)A BCDE10 × 232.017.510.1621.846.414 × 237.122.615.2426.951.516 × 239.625.217.7829.554.120 × 244.730.222.8634.559.126 × 252.337.930.4842.266.830 × 257.442.935.5647.271.834 × 262.548.040.6452.376.940 × 270.155.648.2659.984.950 × 282.868.360.9672.697.260 × 295.581.073.6685.3109.964 × 2100.686.178.7490.4115.0No. of contacts No. of polarizing slotsModelNo. of contactsNo. of polarity slotsModel 10 × 20XG4A-1079-A 40 × 21XG4A-4039-A 1XG4A-1039-A14 × 21XG4A-1439-A 50 × 21XG4A-5039-A 16 × 21XG4A-1639-A2 (See note 2.)XG4A-5079-A 20 × 21XG4A-2039-A 60 × 21XG4A-6039-A 26 × 21XG4A-2639-A2 (See note 2.)XG4A-6079-A 30 × 21XG4A-3039-A 64 × 21XG4A-6439-A34 × 21XG4A-3439-A2 (See note 2.)XG4A-6479-AMounting Example 2-tier Plug Features•Recommended for high-density mounting.•MIL-compliant cable ensures faster delivery times and lower cost than half-pitch board cable. The 2.54-mm pitch simplifies pattern-ing.Correct Use of XG4A 2-tier PlugMounting•Be sure to anchor the board with screws before mounting.•Note that a Polarizing Key cannot be mounted on the lower Plug.Connecting the Socket•Before connecting the XG4M with Strain Relief, remove as much slack from the cable as possible. Insert as shown below.•Attach an XG5S Semi-cover before connecting the XG5M-N. It is not possible to use an XG5S Hood Cover. (See XG5 Datasheet)Soldering•Automated Soldering Conditions (Jet Flow)1.Soldering temperature: 250 ±5°C 2.Continuous soldering time: Within 5 sXG4MT rian g ular markCable mark Cable numberSocket (matin g side)Ri g ht-an g le terminalsXG4AT rian g ular mark (back)Lower connectorUpper connectorApplicable Mating SocketsNote:e with the XG4T strain relief. (XG4M-T includes the connector and strain relief as a set.)e with the XG5S Semi-cover. XG5S Hood Cover cannot be used. (See XG5 Datasheet).3.Polarity slot pitch is 22.86 mm.Mating SocketNo. of contacts No. of polarity slots2-tier PlugModel No.XG4M for flat cable (See note 1.)XG5M-N for discrete wire (See note 2.)10 × 20XG4A-1079-A XG4M-1031XG5M-103@-N 1XG4A-1039-A XG4M-1030XG5M-103@-N 14 × 21XG4A-1439-A XG4M-1430XG5M-143@-N 16 × 21XG4A-1639-A XG4M-1630XG5M-163@-N 20 × 21XG4A-2039-A XG4M-2030XG5M-203@-N 26 × 21XG4A-2639-A XG4M-2630XG5M-263@-N 30 × 21XG4A-3039-A XG4M-3030XG5M-303@-N 34 × 21XG4A-3439-A XG4M-3430XG5M-343@-N 40 × 21XG4A-4039-A XG4M-4030XG5M-403@-N 50 × 21XG4A-5039-A XG4M-5030XG5M-503@-N 2 (See note 3.)XG4A-5079-A XG4M-503160 × 21XG4A-6039-A XG4M-6030XG5M-603@-N 2 (See note 3.)XG4A-6079-A XG4M-603164 × 21XG4A-6439-A XG4M-6430XG5M-643@-N2 (See note 3.)XG4A-6479-A XG4M-6431Cable Number and Contact Position•Cable and Corresponding Contact Number The contact numbers are not marked on the Connector. Use the triangular mark as a guide when wiring and designing circuit boards.For the cable number, count starting from the cable mark side as shown below.■XG4C Box-type (Shrouded) PlugsNote:See XG8 Datasheet for unshrouded PCB plugs / headers that mate with the XG4M-T cable mount sockets.DimensionsOrdering InformationNote:1.Polarizing slot pitch is 22.86 mm.2.The Box-type Plug can be locked to XG4M and XG5 using the “XG4Z-0002” Lock Lever II (sold separately).Trian g ular markPolarizin g Key slot (Not on models with less than 14 contacts.)Polarity slot Polarizin g Key slotRi g ht-an g le DIP terminalsStrai g ht DIP terminals(Ri g ht-an g le DIP terminals)(Strai g ht DIP terminals)Mountin g holes (bottom view)0.8 dia.0Strai g ht DIP terminalsRi g ht-an g le DIP terminals 0.8 dia.0XG4C-@@31/-@@71(With straight DIP terminals)XG4C-@@34/-@@74(With right-angle DIP terminals)Note:See the “Polarity Slot and Polarizing KeySlot Number and Position” section for details on the availability (10-contact Connectors)and pitch (with 50, 60, or 64-contact Connectors) of polarity slots.No. of contacts Dimensions (mm)A B C 1020.017.510.161425.122.615.241627.625.217.782032.730.222.862640.337.930.483045.442.935.563450.548.040.644058.155.648.265070.868.360.966083.581.073.666488.686.178.74No. of contactsNo. of polarizing slotsPlugs with straight DIP terminalsPlugs with right-angle DIP terminals100XG4C-1071XG4C-10741XG4C-1031XG4C-1034141XG4C-1431XG4C-1434161XG4C-1631XG4C-1634201XG4C-2031XG4C-2034261XG4C-2631XG4C-2634301XG4C-3031XG4C-3034341XG4C-3431XG4C-3434401XG4C-4031XG4C-4034501XG4C-5031XG4C-50342 (See note 1.)XG4C-5071XG4C-5074601XG4C-6031XG4C-60342 (See note 1.)XG4C-6071XG4C-6074641XG4C-6431XG4C-64342 (See note 1.)XG4C-6471XG4C-6474■XG4H Board-to-Board SocketsDimensionsOrdering InformationNote:Polarizing guide pitch is 22.86 mm.XG4H-@@31/-@@71(With straight DIP terminals)XG4H-3431-1 XG4H-4031-1(With straight DIP terminals)*Sockets with model numbers end-ing in -1 are available only with 34or 40 contacts (provide kinked ter-No. of contactsNo. of polarizing slotsSockets with straight DIP terminals101XG4H-1031141XG4H-1431161XG4H-1631201XG4H-2031261XG4H-2631301XG4H-3031341XG4H-3431-1401XG4H-4031-1501XG4H-50312 (See note.)XG4H-5071601XG4H-60312 (See note.)XG4H-6071641XG4H-64312 (See note.)XG4H-6471■Mating Diagrams for XG4HPolarity Slot and Polarizing Key Slot Number and PositionClassification No. of contacts10 contacts14 contacts16 to 40 contacts50 to 64 contactsXG4MCable SocketXG4M-1031XG4M-1030XG4M-1430XG4M-1630 to XG4M-6430—XG4M-5031, XG4M-6031, XG4M-6431XG4APCB PlugXG4ECable PlugXG4A-107@XG4E-107@XG4A-103@XG4E-103@XG4A-143@XG4E-143@XG4A-163@ to XG4A-643@XG4E-163@ to XG4E-643@—XG4A-507@, XG4A-607@, XG4A-647@XG4E-507@, XG4E-607@, XG4E-647@ XG4CBox-type PCB PlugXG4C-107@XG4C-103@XG4C-143@XG4C-163@ to XG4C-643@—XG4C-507@, XG4C-607@, XG4C-647@No. of polarizingguides (PolarizingSlots)011112 (H = 22.86 mm)No. of PolarizingKey slot (PolarizingKey Slots)10122Polarizin g Key slotPolarizin g g uidePolarizin gKey slotPolarizin g slotPolarizin g slotPolarizin g slotTools and Accessories (Sold Separately)See “XG@ - Assembly T ooling and Accessories” datasheet from additional information about cable termination tooling.■External Polarization OptionsThe following optional accessories can be used to provide polarization to sockets and plugs that do not have molded polarizing guides and slots built into their housings and shrouds.Solutions for Shrouded ConnectorsXG4Z-0004 Polarizing KeyT ypically, 10 contact versions of the XG4A, XG4E and XG4C areavailable with or without polarizing guides.Install the XG4Z-0004 polarizing key on XG4A, XG4E and XG4Cplugs that do not have a polarizing slot, to prevent reverse connec-tion with XG4M cable sockets that do not have a polarizing guide.For all other versions, the molded polarity guides and slots can beused by themselves to help prevent reverse insertion. However, usethe polarizing key with these versions as well for best results.Note:Each XG4Z-0004 has 4 Polarizing Keys.Solutions for Unshrouded ConnectorsUse the XG4Z-0005 coding pin to fill a specific hole in one of theXG4 or XG5 sockets. Then, use the XY2E-0002 cutting pin to removethe corresponding terminal from an XG8 unshrouded plug.(See XG5 and XG8 datasheets for details about those connectors.)XG4Z-0005 Coding PinNote:1. A contact with a Coding Pin inserted cannot be used.2.Each XG4Z-0005 has 4 Polarizing Keys.XY2E-0002 Contact Cutting DriverThe Contact Cutting Driver is used to cut (twist off) a contact on themating Plug when using an XG4Z-0005 Coding Pin.■Top Lock LeversPrecautions - PCB Mount Sockets and PlugsCorrect UseAutomated Soldering Conditions (Jet Flow)1.Soldering temperature: 250 ±5°C2.Continuous soldering time: Within 5 sNote:The coding pin and cutting tools can also be used to prevent in-correct wiring by removing different terminals from side-by-sideconnectors. For example, for connector set 1, remove terminal1 and fill socket hole 1. Then, for connector set 2, removeterminal 2 and fill socket hole 2. This prevents socket 1 frommating with plug 2, ensuring correct wiring.Material: PBT resin(ULV94V-0)/whiteHow to useInsertTwistPolarizin g KeyPolarizin g Key slotMaterial: PBT resin(ULV94V-0)/whiteHow to useTwistInsertTwistHow to use T w istInsert the pl u gcontact into thegroo v e on theDri v er, and t w istoff the contactfrom the b ase.Material: Polyamide resin(UL94V-2)/nat u ralLock Le v erTa bXG4MPolarity g u ide holeXG8BMaterial: Polyamide resin(UL94V-2)/nat u ralXG4MXG4CInsert the ta b on the LockLe v er into the g u ide hole.XG5Z-0002 - “Lock Lever”Use to lock right angle XG8B and XG8W Plugs to mating socketsXG4Z-0002 - “Lock Lever II”Use to lock XG4C Box-type Plugs to mating sockets.Flat Cable ConnectorsXG4MEMOFlat Cable Connectors XG4OMRON ON-LINEGlobal - USA - Cat. No. X304-E-1Printed in USAOMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite BSchaumburg, IL 60173847-882-228811/10 Specifications subject to change without notice All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at /components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.T o convert millimeters into inches, multiply by 0.03937. T o convert grams into ounces, multiply by 0.03527.。
康普综合布线报价
CPCGGJ2G10FP GRAY 007FT 03F007 CPCGGJ2G10FP GRAY 010FT 03F010 CPCGGL2G10FP-L WHITE 007FT 08F007 CPCGGL2G10FP-L WHITE 010FT 08F010 项目性产品(具体项目,具体申请) CMP阻燃、低烟无卤及十字支撑4对水平铜缆 700216450 3071 004EWH 4/23 W1000 107573545 3061 004AWH 4/24 W1000 760065136 3070 004AWH 4/23 R1000 760065110 1070 004ASL 4/23 R1000 760023226 3091 004AWH 4/23 R1000 760041921 2061 004FWH 4/24 W1000 700208101 2071 004EWH 4/23 W1000 108681172 2081 004AWH 4/23 R1000 760024208 2091 004ASL 4/23 R1000
407484971 407728427 102655495 FTP超五类铜 缆 760031088 760077917 760058578 cpc bbc2 03f007 cpc bbc2 03f009 FTP六类铜缆 760117309 760077909 760058578 cpc aab2 03f007 cpc aab2 03f009 FTP超六类铜 缆(CAT6A) 760060749 760060848 760061291 760058578
CPC6642-03F005 D8PS-5FT CPC6642-03F007 D8PS-7FT CPC6642-03F009 D8PS-9FT UC122E2-03F005 UNC5-DG-5F UC122E2-03F007 UNC5-DG-7F UC122E2-03F009 UNC5-DG-9F CPC6642-03F015 D8PS-15FT CPC6642-03F025 D8PS-25FT
RJ45RJ插座系列产品技术参数要求
RJ45RJ插座系列产品技术参数要求1.RJ45插座技术参数要求：(1) 传输速率：RJ45插座常见的标准包括10BASE-T、100BASE-TX、1000BASE-T等，对应的传输速率分别为10 Mbps、100 Mbps和1 Gbps。
插座必须能够支持指定的传输速率，并能提供稳定的数据传输。
(2)电气特性：插座在传输数据时需要保证信号的可靠性和稳定性。
因此，插座的电气特性参数包括噪声衰减、插入损耗、回波损耗等，要求插座在传输信号时能够保持良好的信号质量。
(4)可靠性和耐久性：RJ45插座需要能够经受频繁的插拔操作，所以对于机械性能有一定的要求。
插座的接触阻抗、插拔次数、接触可靠性等参数都需要符合相关标准，以确保插座在使用寿命期间能够保持稳定的性能。
(5)安装方式：RJ45插座通常有直插式和卧式两种安装方式。
直插式插座适用于板载应用，要求插座的引脚和焊盘完全对应，插入时可靠固定。
卧式插座适用于表面安装应用，要求插座的底部有可靠的焊接接口，能够固定在PCB板上。
2.RJ11插座技术参数要求：(3)可靠性和耐久性：RJ11插座需要能够经受频繁的插拔操作，所以对于机械性能有一定的要求。
插座的接触阻抗、插拔次数、接触可靠性等参数都需要符合相关标准，以确保插座在使用寿命期间能够保持稳定的性能。
(4)安装方式：RJ11插座通常有直插式和卧式两种安装方式，与RJ45插座类似。
直插式插座适用于板载应用，要求插座的引脚和焊盘完全对应，插入时可靠固定。
卧式插座适用于表面安装应用，要求插座的底部有可靠的焊接接口，能够固定在PCB板上。
联发科XG4系列电缆连接器配件说明书
■Tools and Accessories (Sold Separately)XG4Z-0004 Polarizing KeyPolarity guides and slots can be used by themselves to help prevent reverse inser-tion. Use the Polarizing Key as well for best results.Note:Each XG4Z-0004 has 4 Polarizing Keys.XG4Z-0005 Coding Pin(To prevent erroneous insertion)The Coding Pin is used to prevent confu-sion when many Connectors with the samenumber of contacts are lined up. It can alsobe used to prevent reverse insertion whenusing Connectors without a shroud like theXG8 Unshrouded Plug. The Coding Pincan also be used with XC5, and XC6 DINConnectors as well as with XG5 Discrete-wire IDC Connectors.Note:1.A contact with a Coding Pin in-serted cannot be used.2.Each XG4Z-0005 has 4 PolarizingKeys.XY2E-0002 Contact Cutting DriverThe Contact Cutting Driver is used to cut(twist off) a contact on the mating Plugwhen using an XG4Z-0005 Coding Pin.■PrecautionsCorrect Use•Automated Soldering Conditions (JetFlow)1.Soldering temperature: 250 ±5°C2.Continuous soldering time: Within 5±1 s•SolderingSolder-mount the XG4A with the lock leversfully closed or fully open.Solder-mounting the XG4A with the locklever half-open may cause play in lock leverdue to thermal deformation of the housing.•StorageIf the lock levers of the XG4A or XG4E con-nector are left at an intermediate positionfor a long time, they may get to feel loose inoperation due to deterioration of the plasticpart. When the lock levers are not used,store the plug with the lock levers fullyclosed or fully open.Material: PBT resin(UL94V-0)/whiteHo w touseInsertT w istPolarizing KeyPolarizing Key slotMaterial: PBT resin(UL94 V-0)/w hiteHo w to u seT w istInsertT w istModelXG4Z-0004XG4Z-0005XY2E-0002How to useTwistInsert the plugcontact into thegroove on theDriver, and twistoff the contactfrom the base.Material: Polyamide resin(UL94 V-2)/nat u ralLock Le v erTa bXG4MPolarity g u ide holeXG8BMaterial: Polyamide resin(UL94 V-2)/nat u ralXG4MXG4CInsert the ta b on the LockLe v er into the g u ide hole.Lock Lever for XG8B and XG8W Plugs (With Right-angleTerminals)XG5Z-0002Use to lock Unshrouded Plugs (for XG8B and XG8W Plugs withright-angle terminals).Lock Lever II for XG4C PlugsXG4Z-0002Use to lock XG4C Box-type Plugs.ModelXG5Z-0002XG4Z-0002Flat Cable Connectors XG419。
清华同方二合一保护卡网络拷贝过程详解
二合一保护卡网络拷贝过程详解max 2023-06-29一.发送端设置1.在方正二合一保护卡〔标准版〕操作系统引导界面按『F10』键进入系统维护主界面后，点击“网络拷贝”，勾选“接收端开机自动连线”，单击按钮“网络拷贝”。
2.进入发送端／接收端选择界面中选择“发送端”。
3.在网络拷贝／把握主界面点击“等待登录”后，发送端等待接收端的登录。
二.接收端登录发送端1.接收端保护卡没有安装底层驱动之前接收端开机，自动登录到发送端。
2.已经安装了保护卡底层驱动的客户端，可以手工连接〔F10---网络拷贝---网络拷贝---接收端---确定〕到等待登录的发送端。
三.执行网络拷贝，数据传送1.接收端登录完成后，在发送端的网络拷贝主界面下，点击“完成登录”。
2.自动进入发送端把握界面，选择“传送数据”。
3.第一次对接收端进展网络拷贝时，请先执行“拷贝底层驱动和系统参数”。
4.选择“接收端重启动”。
5.接收端重登录后再做“全部操作系统”及“单个操作系统”等操作。
6.网络拷贝完成之后，选择“接收端重启动”，网络拷贝完成。
注：假设不是第一次对接收端进展网络拷贝，则直接传输“全部操作系统”及“单个操作系统”送“拷贝底层驱动和系统参数”均可。
二合一保护卡分区属性和复原方式区分详解max 2023-06-28留意：1.二合一保护卡支持10个操作系统，40个分区2.一个启动盘最多支持3个资料盘。
3.启动盘和专属盘的名称必需全都。
4.磁盘分区属性一旦保存，不能更改。
只能修改A 和 B 属性的复原方式。
分区属性和复原方式设置界面如以以下图：1.保护卡各分区属性的含义属性共分6种：A、B、C、P、S、H。
A：马上复原型启动分区：〔必需安装Windows 驱动〕----适合安装DOS 及Windows 系列的操作系统。
B：备份复原型启动分区：---适合安装DOS、Windows 系列及Linux 系列的操作系统。
C：不复原型启动分区：----适合安装DOS、Windows 系列及Linux系列的操作系统，不需要暂存区，不保护。
中国电信10G-EPON局端设备招标技术规范书
中国电信10G-EPON局端设备集中采购招标技术规范书中国电信集团公司2015年6月目录1概述 (1)1.1范围 (1)1.2说明 (1)1.3技术应答要求 (2)2设备类型和接口 (6)2.1设备形态 (6)2.2设备接口 (7)2.2.1网络侧接口 (7)2.2.2PON接口 (9)2.2.3管理接口 (9)2.2.4其它接口 (9)3设备功能要求 (9)3.1设备支持IP V6能力 (9)3.210G-EPON系统基本功能要求 (10)3.2.1FEC（前向纠错）要求 (10)3.2.2ONU认证 (10)3.2.3测距的要求 (11)3.2.4动态带宽分配功能（DBA） (11)3.2.5ONU的初始化自动配置 (13)3.2.6软件升级功能 (13)3.3以太网功能要求 (13)3.3.1以太网基本功能要求 (13)3.3.2VLAN功能 (15)3.3.3VLAN Stacking功能（IEEE 802.1ad） (16)3.4多业务Q O S机制 (17)3.4.1多业务QoS总体要求 (17)3.4.2业务等级协定（SLA） (17)3.4.3业务流分类功能 (18)3.4.4优先级标记 (18)3.4.5优先级队列机制 (18)3.4.6流限速 (19)3.4.7优先级调度 (19)3.4.8缓存管理 (19)3.5策略控制功能 (19)3.6流量镜像 (20)3.7安全性要求 (20)3.7.1PON接口数据安全 (20)3.7.2MAC地址数量限制 (20)3.7.3过滤和抑制 (20)3.7.4用户认证及用户接入线路（端口）标识 (21)3.7.5广播安全 (21)3.7.6其他安全功能 (22)3.8.2组播协议 (23)3.8.3组播相关的扩展OAM功能要求 (23)3.8.4OLT在可控组播模式下的功能要求 (23)3.8.5组播性能要求 (24)3.8.610G-EPON和1G-EPON的组播共存 (24)3.9光链路保护倒换功能 (25)3.9.1光链路保护倒换功能要求 (25)3.9.2光链路保护倒换类型 (25)3.9.3光链路保护倒换准则 (25)3.9.4光链路保护倒换时间 (26)3.9.5保护倒换返回机制 (26)3.10设备保护功能 (26)3.10.1OLT主控板1+1冗余保护 (26)3.10.2OLT上联口双归属保护 (27)3.10.3配置恢复功能 (27)3.10.4电源1+1冗余保护功能 (27)3.11TDM业务要求（可选） (27)3.12ARP/ND P ROXY功能要求 (28)3.13光链路诊断和测量功能 (28)3.14异常发光ONU检测与处理功能 (29)3.15告警 (29)3.16性能统计 (29)3.16.1性能统计要求 (30)3.16.2性能统计参数越限告警 (30)3.17同步功能 (30)3.17.1 时间同步 (30)3.17.2 频率同步 (30)3.18环路检测功能 (30)3.1910G-EPON和1G-EPON的共存方式 (31)4性能要求 (31)4.1二层处理能力 (31)4.2以太网/IP业务性能指标要求 (32)4.3电路仿真业务的性能指标 (33)4.4时钟与时间同步性能指标要求 (34)5互联互通要求 (34)6设备硬件要求 (34)6.1设备尺寸 (34)6.2指示灯 (34)6.3控制 (34)6.4热插拔 (35)6.5冗余保护 (35)6.6配件 (35)6.7可靠性指标 (35)6.8包装 (35)7供电、环境和安全性要求 (35)7.1供电要求 (36)7.2节能要求 (36)7.2.1节能总体要求 (36)7.2.2ONU PON口节能机制 (36)7.2.3节能相关的扩展OAM功能要求 (36)7.2.4节能参数要求 (36)7.3环保要求 (37)7.4环境要求 (37)7.4.1温度、湿度要求 (37)7.4.2防尘要求 (37)7.4.3大气压力要求 (38)7.5电气安全要求 (38)7.5.1绝缘电阻 (38)7.5.2设备接地要求 (38)7.5.3过压、过流保护 (38)7.5.4电磁兼容 (38)8工程服务要求 (38)8.1工程分工界面 (38)8.1.1督导调试制 (39)8.1.2工程服务制 (39)8.2安装材料要求 (40)8.2.1尾纤 (40)8.2.2网线 (40)8.2.3电力电缆 (40)8.2.4保护地线 (40)9售后服务要求 (40)9.1售后服务的基本要求 (40)9.2保修期的规定 (42)9.3版本管理的要求 (42)9.4坏件送修流程和相关服务标准 (42)9.4.1送修流程 (43)9.4.2维修后产品的保修期 (43)9.4.3运输责任及费用 (43)9.4.4维修时限要求 (43)9.4.5送修统计报告 (44)附录A 中国电信10G-EPON培训基本要求 (45)A.1 10G-EPON技术培训级别分类 (45)A.2 培训说明 (45)A.3 10G-EPON维护工程师基础培训 (45)A.3.1 培训目标 (45)A.3.2 培训地点 (45)A.3.3 培训时长 (45)A.4.1 目标 (47)A.4.2 地点 (47)A.4.3 时长 (47)A.4.4 高级培训课程内容设置 (47)1概述1.1范围本规范为中国电信集团公司（以下简称“中国电信” ）进行10G-EPON局端设备（OLT）集中采购的技术要求。
国泰怡安六类消防产品接线与安装示意图
国泰怡安六类消防产品接线与安装示意图！1、L 、L-是信号总线接线端子，总线无极性。
2、GT601底座与烟感GY601W、温感GW601W、烟温复合GF601W配合使用。
3、信号线宜采用1.5mm2阻燃双色双绞软铜线，耐压值≥250V。
4、安装孔距62.5mm。
5、接线简单、快捷、方便。
1、L 、L-是信号总线接线端子，此端子由中继模块GM614W 端子OL 、OL-引出；作为防爆探测器底座使用时端子，由防爆接口箱GM642中的中继模块GM614端子OL 、OL-到安全栅，由安全栅引出，接线时分极性。
2、GT610底座与非编码烟感GY601W、温感GW601W、防爆烟感GY602EX、防爆温感GW602DEX配合使用。
3、信号线宜采用1.5mm2阻燃双色双绞软铜线，耐压值≥250V。
4、安装孔距62.5mm。
5、接线简单、快捷、方便。
特点：此底座适用范围广。
1、1为L ,2为L-，L 、L-是信号总线接线端子，信号总线无极性。
2、3为24V ，4为24V-，24V 、24V-是探测器的电源接线端子，24V电源有极性。
3、可燃探测器底座与可燃探测器GQ601W配合使用，注：此探测器与底座不分开销售。
4、信号线宜采用1.5mm2阻燃双色双绞软铜线，耐压值≥250V，24v电源线采用阻燃双色双绞线，线径≥2.5mm2。
5、安装孔距53mm，外距68mm，内距38mm。
6、接线简单、快捷、方便。
探测器安装方式1、上图表述了探测器安装示意图，锯齿与凹槽对应或者圆柱与圆柱对应按照顺时针方向旋拧即可将探测器安装牢固。
2、安装方式适用于烟感、温感、烟温复合、可燃气体探测器、非编烟感、非编温感。
手报、消报类接线与安装示意图手报、消报及防爆手报底座接线方式1、L 、L-是信号总线接线端子，信号总线无极性。
2、D1、D2是电话信号线接线端子，D1、D2端子无极性。
注：作手报时使用此端子。
3、GM620按钮底座与手报按钮GM603W配合使用。
海康威视传输产品系列说明书
OPTICAL MODULENETWORK CABLESRECOMMENDED OPTIONSWIRELESS BRIDGEAGGREGATION & CORE ETHERNET SWITCHINDUSTRIAL POE ETHERNET SWITCH≤ 100-ch IPCTypeModel Aggregation switchDS-3E0524TFAccess switch DS-3E01(3)xxP-E(B)Access switchDS-3E01(3)xxP-E/M(B)Access switch DS-3E05xxP-E Access switch DS-3E05xx-EOptical moduleHK-SFP-1.25G-1310-DF-MM100-ch < IPC ≤ 300-chTypeModel Aggregation switch DS-3E2528Access switch DS-3E13xxP-E Access switch DS-3E01(3)xxP-E(B)Access switch DS-3E05xxP-E Access switch DS-3E05xx-E Optical moduleHK-SFP-1.25G-20-1310HK-SFP-1.25G-20-1550300-ch < IPC ≤ 500-chType Model Core switch DS-3E3756TF Core switch DS-3E3740Aggregation switchDS-3E2528Access switch DS-3E23xxP-E Access switch DS-3E05xxP-E Access switch DS-3E01(3)xxP-E(B)Optical moduleHK-SFP-1.25G-20-1310HK-SFP-1.25G-20-1550ModelImageDescriptionHK-SFP-1.25G-20-1310TX 1310 nm/1.25G, RX 1550 nm/1.25G, LC, single mode and single fiber, 20 km, 0~70°C, SFPHK-SFP-1.25G-20-1550TX 1550 nm/1.25G, RX 1310 nm/1.25G, LC, single mode and single fiber, 20 km, 0~70°C, SFPHK-SFP-1.25G-1310-DF-MMTX 1310 nm/1.25G, RX 1310 nm/1.25G, LC, Multi mode and duplex fiber, 1 km, 0~70°C, SFPHK-SFP-1.25G-20-1310-DF TX 1310 nm/1.25G, RX 1310 nm/1.25G, LC, Single mode and duplex fiber, 20 km, 0~70°C, SFPHK-SFP+-10G-20-1270TX 1270 nm/10G, RX 1330 nm/10G, LC, single mode and single fiber, 20 km, 0~70°C, SFP+HK-SFP+-10G-20-1330TX 1330 nm/10G, RX 1270 nm/10G, LC, single mode and single fiber, 20 km, 0~70°C, SFP+Outdoor wireless bridgeElevator wireless bridgeModelDS-3WF01C-2N/ODS-3WF02C-5N/ODS-3WF03CDS-3WF0AC-2NTDS-3WF01C-2NDescriptionSupports point-to-point &point-to-multipoint;Range up to 3 km; 802.11 b/g/n, Built-in 12 dBiantenna up to 150 Mbps; Output power 27 dBm; Angle Horizontal: 60° Vertical: 30°; IP65;Supports point-to-point & point-to-multipoint; Range up to 5 km; 802.11 a/n, Built-in 10 dBi 2×2 MIMO antenna up to 300 Mbps; Output power 24 dBm; Angle Horizontal: 60° Vertical: 16°; IP65;Supports point-to-point & point-to-multipoint; Range up to 15 km; 802.11a/n, Built-in 15dBi 2×2 MIMO antenna with 300 Mbps; Output power 27 dBm; Angle Horizontal: 40° Vertical: 15°; IP65;Supports point-to-point, distance 100 m; IEEE 802.11b/g/n, Built-in 8dBi antenna; Output power 20 dBm; Angle Horizontal: 60° Vertical: 30°; Working temperature: -30 ~65°C; Plug and play, no initial setting;Supports point-to-point, distance 500 m; IEEE 802.11b/g/n, Built-in 6dBi antenna; Output power 27 dBm; Angle Horizontal: 65° Vertical: 60°; Working temperature: -30 ~65°C;Plug and play, no initial setting;ModelDS-1LN5E-SDS-1LN6-UUDS-1LN5E-E/EDS-1LN6-UE-WDescriptionUTP CAT 5E, 305 meters Core diameter: 0.5 mm Solid copper,CM,grayUTP CAT 6, 305 meters Core diameter: 0.565 mm Solid copper, CM, orangeUTP CAT 5E, 305 meters Core diameter: 0.45 mm Solid copper, CMX,grayUTP CAT 6, 305 meters, Core diameter: 0.53 mm Solid copper, CM,whiteModelDS-3E0524TFDS-3E2528DS-3E3740DS-3E3756TFManagement Unmanaged Full-managed Full-managed Full-managed Ports12 × Gigabit RJ45 ports 12 × Gigabit SFP ports24 × Gigabit RJ45 ports 4 × Gigabit SFP ports32 × Gigabit RJ45 ports 8 × 10G SFP+ ports24 × Gigabit RJ45 ports 24 × Gigabit SFP ports 8 × 10G SFP+ portsPacket Forwarding Rate 35.7 Mpps 42 Mpps 136 Mpps 136 Mpps Switching Capacity 48 Gbps 56 Gbps 224 Gbps 256 GbpsMAC Address Table 16 K 8 K64 K64 KManagement Mode -Console, Telnet, SSH2.0, Web, SNMP v1/v2/v3, TFTP, RMONOther Software Features-STP, VLAN, Mirroring, IGMP Snoopingand IGMP v1/v2, L2/L3/L4 ACL, LACP,EAPS, ERPSSTP, VLAN, Mirroring, IGMP Snooping and IGMP v1/v2, L2/L3/L4 ACL, LACP, EAPS,Operating Temperature -5°C~50°C0°C~45°C0°C~45°C0°C~45°C Dimension (440 × 186.5 × 44.5) mm (440 × 230 × 45) mm (442.5 × 315 × 44) mm (442.5 × 350 × 44) mmPower SupplyModelELG-150-48AImageOutput Voltage 48 VRated Current 3.13 ARated Power 150 WOperating Temperature-40~90°CIP Rating IP65AccessoryOptional accessory for industrial PoEswitchIndustrial switchModelDS-3T0306PDS-3T0310PManagement UnmanagedUnmanagedPorts 4 × 10/100 Mbps PoE RJ45 ports2 × Gigabit uplink SFP ports 8 × 10/100 Mbps PoE RJ45 ports 2 × Gigabit uplink SFP ports PoE Standards IEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atPoE Budget≤ 120 W ≤ 240 W Packet Forwarding Rate 3.6 Mpps 4.2 Mpps Switching Capacity 8.8 Gbps 8.8 Gbps MAC Address Table 4 K 4 K Surge Protection 2 KV 2 KV Operating Temperature -40°C~75°C -40°C~75°C Dimension(155 × 130 × 42) mm(170 × 156 × 42) mmUNMANAGED NON-POE ETHERNET SWITCHUNMANAGED POE ETHERNET SWITCHMANAGED POE ETHERNET SWITCHUNMANAGED SWITCHIEEE 802.3bt Standard Hi-PoE, Max. 90 W for One PortIEEE 802.3bt standard Hi-PoE port provides max. 90 W power supply for high power devices such as domes.Up to 300 m Long Range PoE TransmissionBased on all series of camera tests with Hikvisionnetwork cables, up to 300 m long range PoE transmission is provided.Intelligent PoE ManagementWhen the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime.4/8-Core Adaptive Power Supply with Less Power Loss8-core power supply reduces the power loss on cables.6KV Surge Protection to Improve Reliability in Harsh EnvironmentThe built-in surge protection device protects the switch from the sudden lightning surge in harsh environment.Design for Video TransmissionVIP port ensures important data transmission when network congestion occurs.Hi-PoE SwitchesModelDS-3E0106HP-EDS-3E0310HP-EPorts1 × 10/100 Mbps Hi-PoE port 3 × 10/100 Mbps PoE ports2 × 10/100 Mbps RJ45 ports 1 × 10/100 Mbps Hi-PoE port 7 × 10/100 Mbps PoE ports 2 × Gigabit RJ45 ports PoE Standards Port 1: IEEE 802.3af, IEEE 802.3at, IEEE802.3btPorts 2 to 4: IEEE 802.3af, IEEE 802.3atPort 1: IEEE 802.3af, IEEE 802.3at, IEEE802.3btPorts 2 to 8: IEEE 802.3af, IEEE 802.3atPoE Budget 60 W 110 W Max. port PoE power Port 1: 60 W Ports 2 to 4: 30 W Port 1: 90 W Ports 2 to 8: 30 W PoE Extend Mode Max. 300 m, Port 1-4Max. 300 m, Port 1-8Packet Forwarding Rate 0.893 Mpps 4.166 Mpps Switching Capacity 1.2 Gbps 5.6 Gbps MAC Address Table 2 K 16 K Surge Protection 6 KV 6 KV Operating Temperature-10°C~55°C -10°C~55°CDimension(145 × 25.6 × 68.45) mm(217.6 × 27.8 × 103.35) mm10/100 Mbps SwitchesModelDS-3E0105P-E/M(B)DS-3E0109P-E/M(B)DS-3E0318P-E/M(B)DS-3E0326P-E/M(B)DS-3E0105P-E(B)DS-3E0109P-E(C)DS-3E0318P-E(B)DS-3E0326P-E(B)Ports4 × 10/100 Mbps PoE RJ45 ports 1 × 10/100 Mbps uplink RJ45 port8 × 10/100 Mbps PoE RJ45 ports 1 × 10/100 Mbps uplink RJ45 port16 × 10/100 Mbps PoE RJ45 ports 1 × Gigabit uplink RJ45 port 1 × Gigabit uplink SFP port 24 × 10/100 Mbps PoE RJ45 ports1 × Gigabit uplink RJ45 port1 × Gigabit uplink SFP port4 × 10/100 Mbps PoE RJ45 ports1 × 10/100 Mbps uplink RJ45 port8 × 10/100 Mbps PoE RJ45 ports1 × 10/100 Mbps uplink RJ45 port16 × 10/100 Mbps PoE RJ45 ports 2 × Gigabit comb ports (2 RJ45 Ports and 2 SFP Ports)24 × 10/100 Mbps PoE RJ45 ports 2 × Gigabit comb ports (2 RJ45Ports and 2 SFP Ports)PoE Standards IEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atPoE Budget35 W60 W130 W230 W60 W115 W 230 W370 WPoE Extend Mode Max.300 m, Port 1-4Max. 300 m, Port 1-8Max. 300 m, Port 9-16Max. 300 m, Port 17-24Max 300 m, Port 1-4Max 300 m, Port 1-8Max. 300 m, Port 9-16Max. 300 m, Port 17-24Packet Forwarding Rate0.744 Mpps 1.34 Mpps 5.36 Mpps 6.55 Mpps 0.74 Mpps 1.34 Mpps 5.36 Mpps 6.55 Mpps Switching Capacity1 Gbps 1.8 Gbps 7.2 Gbps 8.8 Gbps 1 Gbps 1.8 Gbps 7.2 Gbps 8.8 Gbps MAC Address Table 1 K 2 K 4 K 4 K 1 K 2 K 4 K 4 K Surge Protection 6 KV 6 KV 6 KV 6 KV 6 KV 6 KV 6 KV 6 KV Operating Temperature-10°C~55°C -10°C~55°C -10°C~55°C -10°C~55°C -10°C~55°C -10°C~55°C -10°C~55°C -10°C~55°C Dimension(105 × 27.6 × 83.1)mm(170 × 27.6 × 93.1) mm(266 × 44.5 × 220.8) mm(335 × 44.5 × 226) mm(105 × 27.6 × 83.1) mm(170 × 27.6 × 93.1) mm(440 × 44 × 220.8) mm(440 × 44 × 220.8) mmGigabit SwitchesModel DS-3E0505P-EDS-3E0510P-EDS-3E0518P-EDS-3E0526P-EPorts4 × Gigabit PoE RJ45 ports1 × Gigabit RJ45 port 8 × Gigabit PoE RJ45 ports 1 × Gigabit RJ45 port 1 × Gigabit SFP port 16 × Gigabit PoE RJ45 ports 1 × Gigabit RJ45 port 1 × Gigabit SFP port 24 × Gigabit PoE RJ45 ports 1 × Gigabit RJ45 port 1 × Gigabit SFP port PoE Standards IEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atPoE Budget60 W 110 W 230 W 370 W Packet Forwarding Rate 7.44 Mpps 14.88 Mpps 26.784 Mpps 38.688 Mpps Switching Capacity 10 Gbps 20 Gbps 36 Gbps 52 Gbps MAC Address Table 2 K 4 K 8 K 8 K Surge Protection6 KV 6 KV 6 KV 6 KV Operating Temperature-10°C~55°C -10°C~55°C-10°C~55°C -10°C~55°C Dimension(105 × 27.6 × 83.1) mm(217.6 × 27.8 × 108.55) mm(440 × 44 × 220.8) mm(440 × 44 × 220.8) mmModel DS-3E0105D-EDS-3E0108D-EDS-3E0505D-EDS-3E0508D-EDS-3E0508-EDS-3E0516-EDS-3E0524-EPorts 5 × 10/100 Mbps RJ45 ports 8 × 10/100 Mbps RJ45 ports 5 × Gigabit RJ45 ports 8 × Gigabit RJ45 ports 8 × Gigabit RJ45 ports 16 × Gigabit RJ45 ports 24 × Gigabit RJ45 portsSwitching Capacity 1 Gbps 1.6 Gbps 10 Gbps 16 Gbps 16 Gbps 32 Gbps 48 GbpsPacket Forwarding Rate 0.744 Mpps 1.1904 Mpps 7.44 Mpps 11.904 Mpps 11.9 Mpps 23.8 Mpps 35.7 MppsMAC Address Table 1 K 1 K 2 K 4 K 4 K 8 K 8 KSurge Protection ---- 4 KV 4 KV 4 KVOperating Temperature 0°C~40°C 0°C~40°C 0°C~40°C 0°C~40°C 0°C~40°C 0°C~40°C 0°C~40°CDimension (82 × 52 × 22.4) mm (124 × 59 × 23.2) mm (92.8 × 65.8 × 22.8) mm (142 × 90 × 23) mm (186.7 × 106.7 × 33.3) mm (440 × 178.8 × 44) mm (440 × 178.8 × 44) mmModel DS-3E1310P-EDS-3E1318P-EDS-3E1326P-EDS-3E2310PDS-3E2318PDS-3E2326PDS-3E2510PDS-3E2528PManagement Web-managed Web-managed Web-managed Full-managed Full-managed Full-managed Full-managed Full-managed Ports 8 × 10/100 Mbps PoE RJ45 ports 2 × Gigabit comb ports (2 RJ45 Ports and 2 SFP Ports)16 × 10/100 Mbps PoE RJ45 ports 2 × Gigabit comb ports (2 RJ45 Ports and 2 SFP Ports)24 × 10/100 Mbps PoE RJ45 ports 2 × Gigabit comb ports (2 RJ45 Ports and 2 SFP Ports)8 × 10/100 Mbps PoE RJ45 ports 2 × Gigabit comb ports (2 RJ45 Ports and 2 SFP Ports)16 × 10/100 Mbps PoE RJ45 ports 2 × Gigabit comb ports (2 RJ45 Ports and 2 SFP Ports)24 × 10/100 Mbps PoE RJ45 ports 2 × Gigabit comb ports (2 RJ45Ports and 2 SFP Ports)8 × Gigabit PoE RJ45 ports 2 × Gigabit SFP ports 24 × Gigabit PoE RJ45 ports 4 × Gigabit SFP ports PoE Standards IEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atIEEE 802.3af, IEEE802.3atPoE Budget 123 W 230 W370 W125 W 300 W 380 W 125 W 380 W PoE Extend Mode Max. 250 m, Port 1-8Max. 250 m, Port 1-16Max. 250 m, Port 1-24-----Packet Forwarding Rate 1.34 Mpps 5.36 Mpps 6.55 Mpps 5.6 Mpps 8.4 Mpps 9.6 Mpps 15 Mpps 42 Mpps Switching Capacity5.4 Gbps 7.2 Gbps 8.8 Gbps 10 Gbps 21.2 Gbps 22.8 Gbps 20 Gbps 56 Gbps MAC Address Table 4 K4 K4 K8 K8 K8 K8 K8 KManagement Mode SNMP v1/v2, WEB managementConsole, Telnet, SSH2.0, Web, SNMP v1/v2/v3, TFTP, RMONOther Software Features STP, VLAN, Mirroring, IGMP Snooping and IGMP v1/v2STP, VLAN, Mirroring, IGMP Snooping and IGMP v1/v2, L2/L3/L4 ACL, LACP, EAPS, ERPSSurge Protection 4 KV 4 KV 4 KV 4 KV 4 KV 4 KV 4 KV 4 KV Operating Temperature 0°C~40°C 0°C~40°C 0°C~40°C 0°C~40°C 0°C~40°C 0°C~40°C 0°C~45°C 0°C~45°C Dimension(294 × 165.8 × 44) mm(440 × 285 × 43) mm(440 × 285 × 43) mm(280 × 179 × 45) mm(440 × 232 × 44) mm(440 × 232 × 44) mm(280 × 179 × 45) mm(440 × 232 × 45) mm。
政法网公安四级网新款升级专用10G综合业务光接入设备
BH3630GDX型双光口保护10G综合业务光接入设备用户手册北京创基互联科技有限公司致用户：本设备在设计使用范围内具有良好可靠的性能，但仍应避免人为对设备造成的损害或破坏。
◆仔细阅读本手册，并保存好本手册，以备将来参考用。
◆不要将设备放置在接近水源或潮湿的地方。
◆不要在电源电缆上放任何东西，不要将电缆打结或包住，并应将其放在不易碰到的地方。
◆电源接头以及其它设备连接件应互相连接牢固，请经常检查。
◆连接电源线时，务必认真按接线柱标注接线；所用电源必须满足如下条件：1．直流－48V机种：-36V ~-72V2．交流220V机种：220V±20％，50Hz◆请注意设备清洁，必要时可用软棉布擦拭。
◆在下列情况下，请立即断开电源，并与公司联系。
1．设备进水；2．设备摔坏或机壳破裂；3．设备工作异常或展示的性能已完全改变；4．设备产生气味、烟雾或噪音。
◆请不要自己修理设备，除手册中有明确指示外。
版权声明本手册任何部分不得复印，翻制或以任何形式在网络中发送，除非得到本公司的书面许可。
本说明书所提及的商标所有权由各商标持有人所有。
对于以任何形式修改产品及本说明书而造成的产品功能不能实现或对其他产品、人身造成影响，本公司将不负任何责任。
除此之外，本手册所提到的产品规格和资讯仅供参考，内容亦会随时更新，恕不另行通知，有关信息请向公司查询。
10G综合业务光接入设备一：概述BH3630GDX型10G综合业务光接入设备是我公司采用自主知识产权的大规模集成电路，应用时分复用技术，将四路物理隔离线速千兆以太网信号和E1信号混合编码后在一对光纤上传输,光口支持1+1保护。
实现10/100/1000M以太网、E1接口、普通电话、热线电话、磁石电话、V35业务、RS232/RS485/RS422数据业务、二/四音频、二/四线EM等混合传输，传输通道为光传输通道。
该机采用19英寸、1U机框设计，集成度高，体积小，功耗低，工作可靠，安装使用方便。
转换器系列
性能参数：
产品型号 E1接口数 量 E1接口透 明与分帧 以太网接 口数量 10/100M 全/半双工 IEEE802. 1QVLAN 交叉/直连 自适应
GTT8 E1- 8 10/100M
透明
4
支持
支持
支持
支持
北京银驼铃通信技术有限公司
• GTT 8E1-10/100M 多路网桥组网示意图
北京银驼铃通信技术有限公司
北京银驼铃通信技术有限公司
• GTT 4E1-10/100M 多路E1网桥
特点：
▲1-4路E1灵活配置，自动检测E1的数量和延时并选择可用的E1通道 ▲可自动切断出现LOS或AIS的E1线路，同时通知对端也切断对应线路 ▲E1接口符合ITU G.703 、G.704和G.823协议 ▲以太网接口符合IEEE802.1Q规定的超长帧 ▲支持带有VLAN功能的以太网交换机，保证以太网帧端对端顺序 ▲具有E1线路环回功能，支持本地系统对远端系统的复位 ▲提供集中式模块，应用于局端，提高端口密度，方便管理 ▲220V AC/-48V直流供电方式
性能参数：
产品型号 GTT E110/100M E1接口数 量 1 E1接口透 明与分帧 透明 以太网接 口数量 4 10/100M 支持 全/半双工 支持 IEEE802. 1QVLAN 支持 交叉/直连 自适应 支持
北京银驼铃通信技术有限公司
• GTT E1-10/100M以太网转换器组网应用示意图
性能参数：
产品型号 GTT E110/100M E1接口数 E1接口透 以太网接 量 明与分帧 口数量 4 透明 4 10/100M 支持 全/半双工 IEEE802. 交叉/直 1QVLAN 连自适应 支持 支持 支持
产品规格书 1.0 连接器规格书说明书
制 订Edit审 核Check批 准ApprovalPage 1 of 7NO.: PS0020顾客产品名称型号Client Product Name: 产品名称型号Product Name: 1.0连接器 产品编码Part Number: 规格书版本号Version Number: 0产品规格书PRODUCT SPECIFICATION编号Serial numberPS0020 版本号Version Number产品名称Product Name 1.0连接器产品规格书Product Specification产品编码Part Number1 适用范围Scope本产品规格书适用于乐清市杰渝电子有限公司生产的1.0电子连接器。
This product specification covers the requirements for. 1.0 connector, which is designed and manufactured by YUEQING JIEYU ELECTRONICS Co.,LTD.2 相关标准Related Standards以下参考文件是本规格书的一个组成部份。
若本规格书中的要求与产品图纸发生冲突，则产品图中的要求为优先；若本规格书中的要求与参考文件中的要求冲突，则本规格书为优先。
The following documents form a part of this specification. In the event of conflict between the requirements of this specification and the product drawing, the product drawing shall take precedence. In the event of conflict between the requirements of this specification and the referenced documents, this specification shall take precedence.GB/T 2421 电工电子产品环境试验T esting method for Environmental of Electrical ConnectorsGB/T 2423 电工电子产品环境试验T esting method for Environmental of Electrical ConnectorsGB 2424电工电子产品基本环境试验规程T esting method for Environmental of Electrical ConnectorsGB/T 5095电子设备用机电元件基本试验规程及测量方法T esting procedure/method for components of electric equipment3 产品简图&PCB布线图Product Drawing & PCB Lay out19.0 20.35 18.0 19.35 17.0 18.35 16.0 17.35 15.0 16.35磷铜镀锡Tin/platedQuantity材料Material备注Remark编号Serial numberPS0020 版本号Version Number产品名称Product Name 1.0连接器产品规格书Product Specification产品编码Part Number5 产品性能Performance5.1机械性能Mechanical序号No.项目Item 测试条件Test Condition 规格Requirement5.1.1外观Appearance目测Checking by eye视力：1.0以上Eyesight: > 1.0照明：（200～300）lxLamp: （200～300）lx目测距离：（0.3～0.5）mSpace: （0.3～0.5）m1塑料件表面应无明显疤痕、凹陷、开裂及影响使用的变形。
RJ45连接器商品说明说明书
6368011-3RJ45 Connectors, RJ45, Multiple Ports, Port Matrix Configuration 2 x 1, RJ Type Jacks & Plugs, Standard Connector Contact Density, Jack, Stacked08/27/2020 05:30PM | Page 1For support call+1 800 522 6752Connectors > Modular Jacks & Plugs >RJ45 ConnectorsConnector Contact Density:StandardModular Jacks & Plugs Products:RJ Type Jacks & PlugsPort Matrix Configuration: 2 x 1Port Configuration:Multiple PortsModular Jack & Plug Interface Type:RJ45FeaturesProduct Type FeaturesConnectors & Connector Components Type ConnectorConnector Product TypeConnector Assembly Modular Jack & Plug Interface Type RJ45Modular Jacks & Plugs Products RJ Type Jacks & Plugs Modular Connector Style JackGrounding OptionsPCB and Panel Ground Connector & Contact Terminates To Printed Circuit BoardConfiguration Features Number of PCB Ground Tabs 6Port Configuration Multiple Ports Port Matrix Configuration 2 x 1Connector Contact Density Standard Multiple Port Configuration Stacked Status Indicator Type LED Number of Positions8Number of Loaded Positions 86368011-3 ACTIVETE Internal #:6368011-3RJ45 Connectors, RJ45, Multiple Ports, Port Matrix Configuration 2 x 1, RJ Type Jacks & Plugs, Standard Connector Contact Density, Jack, StackedView on >Number of Positions8Number of Loaded Positions8PCB Mount Orientation Right AngleBody FeaturesGrounding Tab Plating Material Tin over NickelShield Plating Material Tin over NickelShield Material Copper AlloyModular Jack Latch Orientation Standard - Latch DownConnector Profile LowLED Color (Bottom Left)GreenLED Color (Bottom Right)YellowLED Color (Top Left)GreenLED Color (Top Right)YellowContact FeaturesContact Underplating Material NickelPCB Contact Termination Area Plating Material TinContact Current Rating (Max).2 A, 1.5 AContact Mating Area Plating Material GoldContact Base Material Phosphor BronzeContact Mating Area Plating Material Thickness 1.27 µm[50 µin]Termination FeaturesTermination Method to Printed Circuit Board Through Hole - SolderTermination Post & Tail Length 2.85 mm[.112 in]Mechanical AttachmentPanel Mount Feature WithoutConnector Mounting Type Board Mount, Panel MountHousing FeaturesMating Entry Location SideCenterline (Pitch) 1.02 mm[.04 in]Housing Color BlackHousing Material PBT PolyesterDimensionsPCB Thickness (Recommended) 1.57 mm[.062 in]Connector Height31.45 mm[1.23 in]08/27/2020 05:30PM | Page 2 For support call+1 800 522 6752Connector Height31.45 mm[1.23 in]Usage ConditionsOperating Temperature Range-40 – 85 °C, -40 – 85 °C[-40 – 185 °F][-40 –185 °F]Operation/ApplicationShielded YesCircuit Application SignalIndustry StandardsUL Flammability Rating UL 94V-0Performance Category Cat 5Packaging FeaturesPackaging Quantity45Packaging Method TrayProduct ComplianceFor compliance documentation, visit the product page on >EU RoHS Directive 2011/65/EU CompliantEU ELV Directive 2000/53/EC CompliantChina RoHS 2 Directive MIIT Order No 32, 2016No Restricted Materials Above ThresholdEU REACH Regulation (EC) No. 1907/2006Current ECHA Candidate List: JUN 2020(209)Candidate List Declared Against: JAN 2020(205)Does not contain REACH SVHCHalogen Content Not Low Halogen - contains Br or Cl > 900ppm.Solder Process Capability Wave solder capable to 265°CProduct Compliance DisclaimerThis information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledgebased on the information they provided. This information is subject to change. The part numbers that TE has identified asEU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalentchromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to theselimits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment productswill be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the partnumbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenousmaterials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limitsas defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provideson SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance onrequirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-on-reach08/27/2020 05:30PM | Page 3 For support call+1 800 522 675208/27/2020 05:30PM | Page 4For support call+1 800 522 6752TE Model / Part #5223955-2TE UPM Ver Receptacle 3P STD PowerTE Model / Part #1489948-2XFP HEAT SINK CLIP, PLATEDTE Model / Part #5100161-1Z-PACK/C RAF 55PTE Model / Part #2057630-1CFP Receptacle Conn AssyTE Model / Part #2057592-2CFP Guide RailTE Model / Part #2057631-1CFP Receptacle Cover AssyTE Model / Part #5352115-1Z-PACK/C RAF 55PTE Model / Part #2007263-1SFP+ 1x2 Cage AssemblyTE Model / Part #1820802-1ETHERNET CaT 5 Cable AssyTE Model / Part #188729-18P.COVER/SOLD.STOPCompatible PartsCustomers Also BoughtDocumentsProduct DrawingsSTK MJ,2X1,SHLD,I135,G/Y/G/Y LEnglish CAD Files3D PDF3DCustomer View ModelENG_CVM_CVM_6368011-3_D.2d_dxf.zipEnglishCustomer View ModelENG_CVM_CVM_6368011-3_D.3d_igs.zipEnglishCustomer View ModelENG_CVM_CVM_6368011-3_D.3d_stp.zipENG_CVM_CVM_6368011-3_D.3d_stp.zipEnglishTerms and ConditionsBy downloading the CAD file I accept and agree to the of use.Product SpecificationsApplication SpecificationEnglishApplication SpecificationEnglishProduct Environmental ComplianceTE Material DeclarationEnglishAgency ApprovalsUL ReportEnglish08/27/2020 05:30PM | Page 5 For support call+1 800 522 6752。
10GXE01 10GX 类别 6A 增强网线，4对，F FTP，LSZH 室内 CPR Eca说明
Product:10GXE0110GX Category 6A Enhanced Cable, 4 Pair, F/FTP, LSZH Indoor CPR EcaProduct DescriptionCategory 6A Enhanced Premise Horizontal Cable (625MHz), 4-Pair, 23 AWG Solid Bare Copper conductors, F/FTP, Foam Polyethylene insulation, each pair with Beldfoil® shield, AWG 26 solid tinned copper drainwire, overall Beldfoil® shield, LSZH jacket, CPR Euroclass EcaTechnical SpecificationsProduct OverviewConstruction DetailsConductorInsulationCable CoreInner ShieldOuter ShieldOuter JacketElectrical CharacteristicsElectricalsDelay45 ns/100m77% High FrequencyFrequency[MHz]Max. Insertion Loss(Attenuation)Min.NEXT[dB]Min.PSNEXT[dB]Min.ACR[dB]Min.PSACR[dB]Min. ACRF(ELFEXT) [dB]Min. PSACRF(PSELFEXT) [dB]Min. RL(Return Loss)[dB]Min.PSANEXT[dB]Min.PSAACRF[dB]Min.TCL[dB]Min.ELTCTL[dB]1 2.1 dB/100m75.372.373.270.268652067674035 4 3.8 dB/100m66.363.362.559.55653236766.23423 10 5.9 dB/100m60.357.354.451.44845256758.23015 167.5 dB/100m57.254.249.846.843.940.9256754.12810.9 31.210.5 dB/100m52.949.942.439.438.135.123.66748.325.1 5.1 62.515 dB/100m48.445.433.430.432.129.121.565.642.32210019.1 dB/100m45.342.326.223.2282520.162.538.22012521.5 dB/100m43.840.822.319.326.123.119.46136.31920027.6 dB/100m40.837.813.210.22219185832.21725031.1 dB/100m39.336.38.3 5.3201717.356.530.21630034.3 dB/100m38.135.1 3.90.918.515.517.355.328.750045.3 dB/100m34.831.8-10.4-13.4141117.35224.262551.2 dB/100m33.430.4-17.8-20.812.19.117.350.622.3Table Notes:Limits below 4 MHz and at 625 MHz are for information only. Reference standard: IEC 61156-5Transfer ImpedanceFrequency Max. Transfer Impedance1 Mhz Max. 50 mOhm/m10 Mhz Max. 100 mOhm/m30 Mhz Max. 200 mOhm/m100 Mhz Max. 1000 mOhm/mTransfer Impedance Class:Grade 2Screening Class:Type IbTable Notes:Coupling AttenuationVoltageVoltage Rating72 V DCMechanical CharacteristicsTemperatureOperating Installation-30°C to +60°C0°C To +50°CBend RadiusStationary Min.Installation Min.29 mm (1.1 in)57 mmMax. Pull Tension:79 N (18 lbf)Bulk Cable Weight:48 kg/kmStandards and ComplianceEnvironmental Suitability:Indoor - Euroclass EcaFlammability / Reaction to Fire:IEC 60332-1-2CPR Compliance:CPR Euroclass: Eca; CPR UKCA Class: EcaIEEE Compliance:PoE: IEEE 802.3bt Type 1, Type 2, Type 3, Type 4Data Category:Category 6ATIA/EIA Compliance:ANSI/TIA 568.2-DISO/IEC Compliance:ISO/IEC 11801-1, IEC 61034-2 - Smoke Density Min Transmittance = 60%CENELEC Compliance:EN 50173-1, Segregation class according EN50174-2 = dEuropean Halogen Free Standards:IEC 62821-1 Halogen Free Compliance = Yes, IEC 60754-1 - Halogen Amount = Zero, IEC 60754-2 - Halogen Acid Gas Amount - Max. Conductivity = 2.5 µS/mm, IEC 60754-2 - Halogen Acid Gas Amount - Min. pH = 4.3European DirectiveCompliance:EU CE Mark UK Regulation Compliance:UKCA Mark Product NotesNotes:Electrical values are expected performance based on cable testing and representative performance within a typical Belden system.HistoryUpdate and Revision:Revision Number: 0.324 Revision Date: 12-12-2023Part NumbersVariantsItem #Color Putup Type Length EAN10GXE01.06500Blue Reel500 m871960500034710GXE01.08500Gray Reel500 m871960500036110GXE01.K8500Gray Reel500 m871960518886110GXE01.07500Purple Reel500 m871960500035410GXE01.09305White Reel305 m8719605000378© 2023 Belden, IncAll Rights Reserved.Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability.Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.All sales of Belden products are subject to Belden's standard terms and conditions of sale.Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.。
XG4平板电缆连接器商品说明书
30Flat Cable Connector XG4The mainstream of circuit boardconnectors, meeting MIL standards with improved design.•With our new production system, we have improved the reliability and decreased the cost.•Space-saving box-type plug (XG4C) available.•The (XG4C) can be locked using the lock lever.•Conforms to MIL standards (MIL-C-83503)•UL standard component (file no. E103202)Ordering InformationSee ordering tables on the following pages.■Recommended WiresIDC1.27 mm (0.050 in.) pitch flat cable AWG28 (strand wire).Specifications■Materials/Finish*For standard 1.15µm gold plating.XG4AXG4C AppearanceMIL-type plugBox-type PlugRated current 1 A (at 20°C)Rated voltage 250 VACContact resistance 20 m Ω max. (at 20 mV , 100 mA max.)Insulation resistance 1,000 M Ω min. (at 500 VDC)Withstand voltage 500 VAC for 1 min. (leakage current 1 mA max.)Connector insertion 200 gf (0.44 lb.f) max. per terminalContact removal 40 gf (0.088 lb.f) min. (test gauge with 0.64-mm (0.025-in.)Usage durability 50 times min.Operating temperature-55°C to 105°CItem Mil-type plug XG4A. Box-type plug XG4C Housing PBT resin with glass (UL94V-0)/black ContactMoving end Brass/nickel base, 0.15 µm gold plated*TerminalBrass/nickel base, 0.2 µm tin platedMIL Type Plug with Long Lock – XG4A■DimensionsXG4A-@@31/@@71 (Straight dip terminals)XG4A-@@34/@@74 (Right-angle dip terminals)Flat Cable Connector XG431MIL Type Plug with Long Lock – XG4A■Ordering InformationUse in combination with strain-relief sockets.No. of contactsDimensions [mm (in.)]PolarityguidesModelStrain relief(with lock)A B C D E Set*Socket**(with open-end cover)1032.0 (1.26)17.5 (0.69)10.16 (0.4)21.8 (0.86)27.9 (1.1)38.8 (1.53)0XG4A-1071XG4A-10741XG4A-1031XG4A-1034 1437.1 (1.46)22.6 (0.89)15.24 (0.6)26.9 (1.06)33.0 (1.3)43.9 (1.73)1XG4A-1431XG4A-1434 1639.6 (1.56)25.2 (0.99)17.78 (0.7)29.5 (1.16)35.6 (1.4)46.5 (1.83)1XG4A-1631XG4A-1634 2044.7 (1.76)30.2 (1.19)22.86 (0.9)34.5 (1.36)40.6 (1.6)51.5 (2.03)1XG4A-2031XG4A-2034 26 52.3 (2.06)37.9 (1.49)30.48 (1.2)42.2 (1.66)48.3 (1.9)59.2 (2.33)1XG4A-2631 XG4A-2634 3057.4 (2.26)42.9 (1.69)35.56 (1.4)47.2 (1.86)53.3 (2.1)64.2 (2.53)1XG4A-3031XG4A-3034 3462.5 (2.46)48.0 (1.89)40.64 (1.6)52.3 (2.06)58.4 (2.3)69.3 (2.73)1XG4A-3431XG4A-3434 4070.1 (2.76)55.6 (2.19)48.26 (1.9)59.9 (2.36)66.0 (2.6)76.9 (3.03)1XG4A-4031XG4A-4034 5082.8 (3.26)68.3 (2.69)60.96 (2.4)72.6 (2.86)78.7 (3.1)89.6 (3.53)1XG4A-5031XG4A-50342XG4A-5071XG4A-5074 6095.5 (3.76)81.0 (3.19)73.66 (2.9)85.3 (3.36)91.4 (3.6)102.3 (4.03)1XG4A-6031XG4A-60342XG4A-6071XG4A-6074 64100.6 (3.96)86.1 (3.39)78.74 (3.1)90.4 (3.56)96.5 (3.8)107.4 (4.23)1XG4A-6431XG4A-64342XG4A-6471XG4A-647432Flat Cable Connector XG4MIL Type Plug with Short Lock – XG4A■DimensionsXG4A-@@32/@@72 (Straight dip terminals)XG4A-@@35/@@75 (Right-angle dip terminals)Flat Cable Connector XG433MIL Type Plug with Short Lock – XG4A ■Ordering InformationUse in combination with strict non-strain-relief socketsNo. of contacts Dimensions (mm [in.])PolarityslotsModelA B C D E F Straight dipterminalsRight-angledipterminals1032.0 (1.26)17.5 (0.69)10.16 (0.4)21.8 (0.86)27.9 (1.1)35.8 (1.41)0XG4A-1072XG4A-10751XG4A-1032XG4A-1035 1437.1 (1.46)22.6 (0.89)15.24 (0.6)26.9 (1.06)33.0 (1.3)40.9 (1.61)1XG4A-1432XG4A-1435 1639.6 (1.56)25.2 (0.99)17.78 (0.7)29.5 (1.16)35.6 (1.4)43.5 (1.71)1XG4A-1632XG4A-1635 2044.7 (1.76)30.2 (1.19)22.86 (0.9)34.5 (1.36)40.6 (1.6)48.5 (1.91)1XG4A-2032XG4A-2035 2652.3 (2.06)37.9 (1.49)30.48 (1.2)42.2 (1.66)48.3 (1.9)56.2 (2.21)1XG4A-2632XG4A-2635 3057.4 (2.26)42.9 (1.69)35.56 (1.4)47.2 (1.86)53.3 (2.1)61.2 (2.41)1XG4A-3032XG4A-3035 3462.5 (2.46)48.0 (1.89)40.64 (1.6)52.3 (2.06)58.4 (2.3)66.3 (2.61)1XG4A-3432XG4A-3435 4070.1 (2.76)55.6 (2.19)48.26 (1.9)59.9 (2.36)66.0 (2.6)73.9 (2.91)1XG4A-4032XG4A-4035 5082.8 (3.26)68.3 (2.69)60.96 (2.4)72.6 (2.86)78.7 (3.1)86.6 (3.41)1XG4A-5032XG4A-50352XG4A-5072XG4A-5075 6095.5 (3.76)81.0 (3.19)73.66 (2.9)85.3 (3.36)91.4 (3.6)99.3 (3.91)1XG4A-6032XG4A-60352XG4A-6072XG4A-6075 64100.6 (3.96)86.1 (3.39)78.74 (3.1)90.4 (3.56)96.5 (3.8)104.4 (4.11)1XG4A-6432XG4A-64352XG4A-6472XG4A-6475Type ModelLong lock XG4Z-0010Short lock XG4Z-001134Flat Cable Connector XG4Box-type – XG4C■DimensionsBox typeXG4C-@@31/@@1071(Straight dip terminals)XG4C-@@31/@@1074(Right-angle dip terminals)Flat Cable Connector XG43536Flat Cable Connector XG4Box-type – XG4C■Ordering InformationNote: The box-type plug can be locked using lock lever XG4Z-0011 (sold separately).No. of contactsPolarity storeDimensions [mm (in.)]ModelABCStraight dipterminalsRight-angle dip terminals 10020.0 (0.79)17.5 (0.69)10.16 (0.4)XG4C-1071XG4C-10741XG4C-1031XG4C-103414125.1 (0.99)22.6 (0.89)15.24 (0.6)XG4C-1431XG4C-143416127.6 (1.09)25.2 (0.99)17.78 (0.7)XG4C-1631XG4C-163420132.7 (1.29)30.2 (1.19)22.86 (0.9)XG4C-2031XG4C-203426140.3 (1.59)37.9 (1.49)30.48 (1.2)XG4C-2631XG4C-263430145.4 (1.79)42.9 (1.69)35.56 (1.4)XG4C-3031XG4C-303434150.5 (1.99)48.0 (1.89)40.64 (1.6)XG4C-3431XG4C-343440 1 58.1 (2.29)55.6 (2.19)48.26 (1.9)XG4C-4031XG4C-403450170.8 (2.79)68.3 (2.69)60.96 (2.4)XG4C-5031XG4C-50342XG4C-5071XG4C-507460183.5 (3.29)81.0 (3.19)73.66 (2.9)XG4C-6031XG4C-60342XG4C-6071XG4C-607464188.6 (3.49)86.1 (3.39)78.74 (3.1)XG4C-6431XG4C-64342XG4C-6471XG4C-6474Flat Cable Connector XG437■Cable Number and Contact PositionCable and corresponding contact no.The contact numbers are not printed on the connector. Use the trian-gular mark as a guide when wiring and designing circuit boards. For the cable number, count starting from the cable mark side as shown below.■Mated DimensionsPrecautionsManufacturing tools, polarity slots, and polarizing keys are available depending on model. Please contact Omron for more information.Conditions for automatic soldering (jet type)Soldering temperature:250°C ± 5°CContinuous soldering period: 5 seconds or lessHandling of XG4UDo not use or store XG4U’s in an environment condensed with mag-netic particles.XG4A2-level type right-angle terminal plug (terminal side)XG4MSocket (mating side)XG4ARight-angle terminal plug (terminal side)XG4AStraight terminal plug (terminal side)XG4U and XG4M and XG4C (Straight terminal)XG4U and XG4M and XG4C(Right-angle terminal)Terms and Conditions of Sale1.Offer; Acceptance. These terms and conditions (these "T erms") are deemedpart of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronic Components LLC ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these T erms.2. Prices; Payment. All prices stated are current, subject to change withoutnotice by Seller. Buyer agrees to pay the price in effect at time of shipment.Payments for Products received are due net 30 days unless otherwise stated in the invoice.3. Discounts. Cash discounts, if any, will apply only on the net amount ofinvoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller.4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-lars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller and which is available on the due date; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dol-lars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear allcosts involved in, obtaining any government approvals required for the impor-tation or sale of the Products.6. Taxes. All taxes, duties and other governmental charges (other than generalreal property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller.7. Financial. If the financial position of Buyer at any time becomes unsatisfactoryto Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these T erms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts.8. Cancellation; Etc. Orders are not subject to rescheduling or cancellationunless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith.9. Force Majeure. Seller shall not be liable for any delay or failure in deliveryresulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority.10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:1. Shipments shall be by a carrier selected by Seller;2. Such carrier shall act as the agent of Buyer and delivery to such carriershall constitute delivery to Buyer;3.All sales and shipments of Products shall be FOB shipping point (unlessotherwise stated in writing by Seller), at which point title to and all risk ofloss of the Products shall pass from Seller to Buyer, provided that Sellershall retain a security interest in the Products until the full purchase price is paid by Buyer;4. Delivery and shipping dates are estimates only.5.Seller will package Products as it deems proper for protection againstnormal handling and extra charges apply to special conditions.11.Claims. Any claim by Buyer against Seller for shortage or damage to theProducts occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original trans-portation bill signed by the carrier noting that the carrier received the Products from Seller in the condition claimed. 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that theProducts will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). Seller disclaims all other warranties, express or implied.(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENT ATION,EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANT ABIL-ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUIT ABL Y MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or oth-erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obli-gation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Seller's analysis confirms that the Products were properly handled, stored, installed and maintained and not sub-ject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment.Seller shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies, or any other materials or substances or environ-ments. Any advice, recommendations or information given orally or in writing are not to be construed as an amendment or addition to the above warranty.13.Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL,INDIRECT, INCIDENT AL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON-NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Product on which liability is asserted.14.Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates andits employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, inves-tigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these T erms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party.15.Property; Confidentiality. The intellectual property embodied in the Products isthe exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstand-ing any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials sup-plied by Seller to Buyer relating to the Products are confidential and propri-etary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party.16.Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any rightand no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Law. These T erms are governed by Illi-nois law (without regard to conflict of law principles). Federal and state courts in Illinois shall have exclusive jurisdiction for any dispute hereunder.(d)Amendment. These T erms constitute the entire agreement between Buyerand Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice.. (g) Definitions. As used herein, "including" means "including without limitation".Certain Precautions on Specifications and Use1.Suitability for Use. Seller shall not be responsible for conformity with any stan-dards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will pro-vide applicable third party certification documents identifying ratings and limita-tions of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combi-nation with the end product, machine, system, or other application or use.Buyer shall be solely responsible for determining appropriateness of the partic-ular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i)Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.(ii)Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject toseparate industry or government regulations.(iii)Use in consumer products or any use in significant quantities.(iv)Systems, machines and equipment that could present a risk to life orproperty. Please know and observe all prohibitions of use applicable to this product.NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERL Y RATED AND INST ALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.2.Programmable Products. Seller shall not be responsible for the user'sprogramming of a programmable product, or any consequence thereof.3.Performance Data. Performance data given in this publication is provided as aguide for the user in determining suitability and does not constitute a warranty.It may represent the result of Seller's test conditions, and the users must corre-late it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability.4.Change in Specifications. Product specifications and accessories may bechanged at any time based on improvements and other reasons. It is our prac-tice to change part numbers when published ratings or features are changed,or when significant construction changes are made. However, some specifica-tions of the Product may be changed without any notice. When in doubt, spe-cial part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to con-firm actual specifications of purchased Product.5.Errors and Omissions. The information in this publication has been carefullychecked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions.6.RoHS Compliance. Where indicated, our products currently comply, to the bestof our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Sub-stances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information.OMRON ON-LINEGlobal - USA - Canada - http://www.omron.caCat. No. JB301-E3-01Printed in USAOMRON CANADA, INC.885 Milner AvenueT oronto, Ontario M1B 5V8416-286-6465OMRON ELECTRONIC COMPONENTS LLC55 E. Commerce Drive, Suite B Schaumburg, IL 60173847-882-22883/05 Specifications subject to change without noticeComplete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at – under the “About Us” tab, in the Legal Matters section.ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.T o convert millimeters into inches, multiply by 0.03937. T o convert grams into ounces, multiply by 0.03527.。