LEHQ2635-06

合集下载

莱福德、明纬、富华电源产品

莱福德产品
序号 1 2 3 4 5 6 7 8 9 10 14 15 18 19 20 21 公司名莱福德莱福德莱福德莱福德莱福德莱福德莱福德莱福德莱福德莱福德莱福德莱福德莱福德莱福德莱福德莱福德型号 LF-G160 G425A G425B LF-G134A LF-G241H LF-G417 G217A G217B LF-G426 LF-G525H G227A G227B G407A G407B G407D G407E 功率 6W 4.9W 2.8W 6W 6W 20W 21W 21W 21.8W 28W 10W 10W 33W 33W 33W 33W 基本参数 AC100V～240V、DC12～20V、320mA AC100-240V、DC9～14V、350mA AC100-240V、DC3～4V、700mA AC100V～240V、DC12～20V、300mA AC100V～240V、DC12～24V、350mA AC100V～277V、DC27～40V、500mA AC100-240V、DC40～70V、300mA AC100-240V、DC18～28V、700mA AC100-240V、DC30～40V、510mA AC200-240V、DC30～40V、700mA AC100-240V、DC21～32V、300mA AC100-240V、DC12～20V、500mA
富华产品
序号 1 2 3 4 5 公司名富华富华富华富华富华型号 UEL008-S024030-N1P UEL008-S048016-N1P UEL008-S024030-N1 UEL008-S048016-N1 UEL015-S014105-P1B 功率 8W 8W 8W 8W 15W 基本参数 AC90-264V、DC16-24V、300mA AC90-264V、DC24-48V、160mA AC90-264V、DC24V、0.3A AC90-264V、DC48V、0.16A AC90-264V、DC8-14V、1050mA

海尔彩电机型与遥控器对照表

CD4000306
34A
28
HYF-28E
HS-2998，HS-2998D
CD4000292
29
HYF-28C
HP-2998B
CD4000777
30
HYF-24C
HP-2981C，HP-2188，HP-2559
CD4000779
31
HYF-24E
HS-2968，HS-2528，HS-2528D，HS-2918D
惠州长城
78
H-2116
H-2116
N-790-002601-14
中山嘉华
79
H-2516
H-2516
N-790-002607-10
中山嘉华
80
H-2916
H-2916
N-790-002607-10
中山嘉华
81
HYF-26A
H-3725B
N-99-001-003
杭州海尔
82
HYF-40A
HG-2560V，HG-2569PN，
CD4003746
合产
69
HYF-35A
25F99
CD4000306
合产
70
HYF-26C
HS-2929
CD4000367
合产
71
HD-2919
HD-2919
德国迈子机
72
HD-2929
HD-2929
德国迈子机
73
HD-2979
HD-2979
德国迈子机
74
HD-3299
HD-3299
德国迈子机
75
HD-3466
4
HTR-023
29T5A-T，29F5A-T，29F7A-T，29T7A-T，34P2A-P

Lincoln Power TIG 275 焊接机说明书

ProcessesStick, TIGProduct NumberK2619-1K2619-2K2620-1K2618-1 Ready-Pak®Package See back for complete specs© Lincoln Global, Inc. All Rights Reserved.275TIG WELDERSInput Power (Voltage/Phase/Hertz)K2619-1/K2618-1:208/230/460/1/60K2619-2:460/575/1/60K2620-1:220-230/380-400/415/1/50/60Input Current at Rated Output208V:104460V:47220-230V:95575V:38230V:94380-400V:55415V:50Rated Output: Current/Voltage/Duty Cycle275A/31V/40%Weight/Dimensions (H x W x D)397 lbs. (180 kg)31 x 22 x 26 in.(787 x 559 x 660 mm)INPUT OUTPUTK2618-1 Includes:K2619-1Under-Cooler Cart Water Cooler –PH: +1.216-481-8100 • LI NC OL N E L E C TR ICShown K2619-1[ 2]|Precision TIG ®275What Is It?Pulse welding systems vary weld current between peak (high heat) and background current (low heat) levels. Adjusting the pulse frequency controls the level of heat input applied to the weld relative to the weld travel speed.ResultsBetter control of heat input in the weld, resulting in:•Reduced warping and burnthrough on thin materials. •Smaller heat-affected zone – good for thin material.•Smaller bead profile without compromising proper penetration.Easy “Set It/See It” Operation:•Flashing indicator light lets you see the pulse rate before you strike an arc.W e l d i n g C u r r e ntTimePulsed TIG Weld (at 60 amps)Standard TIG Weld (at 60 amps) Smaller HeatAffected ZoneSmaller Bead ProfileMicro-Start ™II Technology aids arc stabilityTHROUGHOUT THE WELD CYCLE – even at the lowest amperage! Micro-Start ™II Technologycontrolled ramp down helps precisely fill the weld crater for quality results.Micro-Start ™II Technology minimizes high frequency and ‘hot starts’ to deliver soft arc starts without arc wandering for AC and DC welding. Arc PerformanceMicro-Start ™Stable, Focused Arc Precise Crater Fill“Set It/See It” Pulse Control — Make attractive and consistent welds!N O WIN C L U D ESf o r A L UM IN U MW E L D INGA CPrecision TIG ®275| [ 3]AC Auto Balance ®Controls —Automatically sets the optimal cleaning vs. penetration level for aluminum welding!What Is It?When aluminum welding, the positive (+) portion of the AC weldingamperage cleans the oxides from the aluminum surface. The negative (-)portion delivers more heat input, increasing penetration level.Patented AC Auto Balance ®automatically sets the ratio of cleaning action (+) versus penetration (-) based on amperage.Manual balance control provides the flexibility to customize the arc to your preference.Easy Operation:•Set it and forget it or override when you choose to customize the settings.More Cleaning (+)Less Cleaning (+)Less Penetration(-)More Penetration (-)W E L D I N G W E L D I N G TIMETIMEMaximum Cleaning SettingMaximum Penetration SettingAuto Balance Setting•Fan-As-Needed (F.A.N.)™minimizes repeated heating and cooling of internal components, keeps dust and dirt build-up to a minimum and saves on electricity costs. •Engineered cooling air routing brings clean air in from the top and exhausts at the bottom to draw and collect less dirt in the machine. •Compare these reliability enhancing design features: — Crimped and soldered power connections.— Wound and varnished electrical coils do not require coil spacers used on competitive models. — Locking tabs on PC board connectors eliminates loose connections.•Tough testing cycles ensure long service — dropping, jerking,rolling, shipping, vibration, resistance to real world extreme conditions, and extended in-service life testing. •CSA C/US certified.•Lincoln three-year warranty on parts and labor.Clean, cool air route shown.Snap-action durable switches make positive mechanical contact to reduce chances ofintermittent contact failure.[ 4]| Precision TIG ®275Shown: K2618-1Water-Cooled Ready-Pak ®PackageTorch Parts Storage Compartment.Optional TIG pulsing helps you make great welds.Water-cooled torch connections with no adapters — side mounted to keep out of the way and protected.Neat/organized cable management with integratedtorch holster.Separate output studs for stick and TIG keep both stick electrode holder and TIG torch connected at the same time — eliminates set-up changeover when switching processes.Easily accessible input voltagereconnect panel.Low-Lift ™ Shielding Gas Bottle Platform.Lockable Undercarriage Storage and Water Cooler Drawers.Reliable Pro-Con Pump.Optional Features:(standard with K2618-1 Water-Cooled Ready-Pak ®Package)Precision TIG ®275| [ 5]Large, well-spaced controls make it easy to view and set upwith gloved hands.SET-UP MENUPress and hold the menu button to display up to seven programmable parameters. The setting of the desired level is displayed, and increasing or decreasing the level setting is easy.The Set-Up Menu includes:Standard•DC TIG Start Modes: High Frequency, Scratch Start, and Touch Start TIG ®.•Adjustable Preflow Time.•Adjustable Start Pulse for Soft or Forceful Starts.With Optional Advanced Control Panel •Adjustable TIG Hot Start.•Adjustable Upslope Time.•Adjustable Stick Hot Start.•Adjustable Stick Arc Force.A)Minimum Output Control & Display Switch (Also displays output voltage)B)Set-Up Menu (see below)C)Digital MeterD)Local/Remote Current Control Switch E)Maximum Output Control F)Post Flow Time G)Thermal Shutdown Light H)Optional Advanced Control Panel 1)Trigger Switch (2-step/4-step)2)Pulse/Spot Time Mode Switch 3)Pulse Frequency Control 4)Pulse % On Time Control 5)Pulse Background Current Control 6)Downslope Time, In Seconds 7)Spot Time I)Polarity Switch J)Power Switch K)AC Balance Control L)Mode SwitchH123 4 & 756BCDEAF G HI J KLC U S T O M E R A S S I S T A N C E P O L I C YThe business of The Lincoln Electric Company ®is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for information or advice about their use of our products. Our employees respond to inquiries to the best of their ability based on information provided to them by the customers and the knowledge they may have concerning the application. Our employees, however, are not in a position to verify the information provided or to evaluate the engineering requirements for the particular weldment. Accordingly, Lincoln Electric does not warrant or guarantee or assume any liability with respect to such information or advice. Moreover, the provision of such information or advice does not create, expand, or alter any warranty on our products. Any express or implied warranty that might arise from the information or advice, including any implied warranty of merchantability or any warranty of fitness for any customers’ particular purpose is specifically disclaimed.Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to for any updated information.For best welding results with Lincoln Electric equipment,always use Lincoln Electric consumables. Visit for more details.GENERAL OPTIONSAdvanced Control Panel Provides 2/4-step trigger with adjustable Pulser controls and Downslope timer for TIG welding.Also includes adjustable Hot Start and Arc Force internal panel controls for stick welding, and other user selectable features.Order K2621-1Under-Cooler Cart Water Cooler Includes “cooler-in-a-drawer” with hoses and a lockable storage drawer on a dual bottle undercarriage. Two gallon (7.5 ltrs.) capacity.Order K1828-1UndercarriageIncludes a dual bottle rack with chain and front casters, rear wheels and a handle. Order K1869-1Harris ®Argon Flowmeter RegulatorDeluxe flowmeter/regulator. Includes 10 ft. (3.0 m) hose. Order 3100211Work Clamp & Cable Assembly 15 ft. 2/0 cable with 1/2 in. stud lug and work clamp. Order K2150-1STICK OPTIONSAccessory KitFor stick welding. Includes 35 ft.(10.7 m) 2/0 electrode cable with lug, 30 ft. (9.1 m) 2/0 work cable with lugs, headshield, filter plate,work clamp and electrode holder.400 amp capacity.Order K704Accessory KitFor stick welding. Includes 20 ft. (6.1 m) #6 electrode cable with lug,15 ft. (4.6 m) #6 work cable with lugs, headshield, filter plate, work clamp, electrode holder and sample pack of mild steel electrode. 150amp capacity.Order K875Remote Output ControlConsists of a control box with choice of two cable lengths. Permits remote adjustment of output. 6 pin connection.Order K857for 25 ft. (7.6 m)Order K857-1for 100 ft. (30.5 m) TIG OPTIONSMagnum®Pro-Torch™TIG TorchesA full line of air-cooled and water-cooled torches available.Request publication E12.150PTA-26 One-Cable AdapterAdapts the 7/8 in. PTA-26 fitting tothe 5/8 in. gas and powerconnection on machine. Order K2166-1PTA-9, -17 One-Cable Adapter Adapts the 3/8 in. PTA-9 or -17fitting to the 5/8 in. gas and power connection on machine.Order K2166-3PTA-9, PTA-17, PTA-26 Two-Cable AdapterConverts the 7/8 in. water andpower connection on the machine to a 1/2 in. output stud for use with a two-cable air-cooled TIG torch.Order K2166-2Foot Amptrol ™Varies current for making critical TIG welds. Depress pedal to increase current. Depressing pedal fullyachieves maximum set current. Fully raising the pedal finishes the weld and starts the afterflow cycle.Includes 25 ft. (7.6 m) control cable.6-pin plug connection.Order K870Hand Amptrol ™Provides 25 ft. (7.6 m) of remote current control for TIG welding (6 pin plug connection). Velcro straps secure torch.Order K963-3(One size fits all Pro-Torch ™TIG Torches.)Arc Start SwitchNeeded if an Amptrol ™is not used when TIG welding. Comes with a 25ft. (7.6 m) cable. Attaches to the TIG torch for convenient finger control. 6-pin plug connection. Order K814Cut Length Consumables TIG welding filler metals are available for welding stainless steel, mild steel, aluminum and copper alloys.See publication C1.10。

星级酒店弱电系统报价单

二、现场直接数字式控制器（DDC）
三、现场末端装置（传感器及执行机构）
小计
电视监控系统
序号
1 2 3 4 5 6
设备名称数字硬盘录像机液晶显示器硬盘室内一体化高速半球型摄像机高清彩色红外半球电梯专业半球摄像机
规格型号 HDB-DVR416E 19寸 2T HDB-527PCB-3 HDB-701MM HDB-9003WCB
系统调试
5
6
7
8
9
10
11
12
大口径—1.2m MW-MOD-9631 MW-BLE-L32-*/* 5-1000MHzH通用型（室内型、中号外壳） 5-1000MHzH通用型（室内型、中号外壳） 5-1000MHzH通用型（室内型、中号外壳） 5-1000MHzH通用型（室内型、中号外壳） 5-1000MHzH通用型（室内型、中号外壳） 5-1000MHzH通用型（室内型、中号外壳） 5-1000MHzH通用型（室内型、中号外壳） 5-1000MHzH通用型（室内型、中号外壳） 5-1000MHzH通用型（室内型、中号外壳） SYV-75-5
明月谷酒店楼控系统序号名称规格型号品牌数量单位单价合计一监控站楼宇自控系统设备中央站p4tdell打印机epson1600kepson不间断电源ups05kvasantakinsightsoftware571010siemens通讯接口trunkinterfaceii538675siemensddcmec200mec200siemensddcmec201mec201siemens549210siemens549214siemens10定做11定做三现场末端装置传感器及执行机构12风道温湿度空气品质传感器qpm2162siemens13液位传感器mac3mac14一氧化碳传感器cmd5b2000greystone15风道温湿度传感器qfm2160siemens16风道温度传感器54433918aqm2000siemens17防冻开关qaf813siemens18压差开关qbm813siemens19gbb1611esiemens20gbb1311esiemens21vvg4425sqs65alg252siemens22cvvi414025siemens23cvvi415040siemens24vvf4180skc62siemens25vvf4190skc62siemens26包塑金属软管20国产27网络线awg18国产28电源线rvv3x15国产29信号线rvvp3x10国产30信号线rvvp2x10国产31信号线rvv2x10国产小计电视监控系统序号设备名称规格型号品牌数量单位单价合计数字硬盘录像机hdbdvr416e液晶显示器三星11硬盘2t希捷11室内一体化高速半球型摄像机hdb527pcb3高清彩色红外半球hdb701mm电梯专业半球摄像机hdb9003wcb彩色红外高清摄像机hdb5680yc视频矩阵hdbd2025a25616控制键盘hdbd207810视频分配器hdbd1632v11高清彩色逐行监视器hdbcm21aa12电视墙及操作台1611定制13电源12v2a国产14214球机电源24v2a国产26156kw16视频线syv755国产1100017电源线rvv210国产300018控制线rvvp210国产1100国产40019管材国产400021系统调试22小计电子巡更系统感应巡更棒0compa1602ocom通讯座0compbu320ocom地点识别卡pid2ocom120人员识别卡ocom5

Sensata技术有限公司的感应器产品介绍说明书

|DSU9H & DSU9X MODELSSIL3 PLe INCREMENTAL ENCODERS SPECIFICATIONSFeatures•Usable up to SIL3 and Cat.4 / PLe according to IEC 61508 / EN ISO 13849•Suitable for safe motor feedback according to IEC 61800-5-2•E specially designed for heavy-duty applications (steel, paper, wood,mills, cranes…) Compact and robust design. Excellent resistance to shock and vibration•Stainless steel version available (DSU9X)•90mm encoder, 30mm standard through shaft, PE E K reduction hub available•High protection level: IP66 (DSU9X), IP65 (DSU9H)•High temperature performance –20°C to +85°C •Power supply 5Vdc or 11/30Vdc•Digital TTL/RS422 or HTL Push-pull or sine/cosine 1Vpp output •Available resolution up to 2048 ppr•Connector or cable output – side orientation •Adapted anti-rotation systemIntroductionApplications•Industrial automation•Automated guided vehicles•Mills for lumber, steel and other metals •Printing and packaging equipment •Food processing equipment •Forming and die pressesDSU9XWhen an automation system requires a high degree of risk mitigation of failure modes, often times Functional Safety equipment can be a part of the solution. Sensata | BEI Sensors offers a wide range of Functional Safety encoders to ﬁt most any application or electrical interface requirement. Rated at SIL3 (PLe), these encoders allow safe operation in set-up, production and maintenance modes, signiﬁcantly reducing operational risks. All encoders have the option of a Digital HTL or TTL operation as an alternative to the Sine/Cosine outputs found on most Functional Safety encoders. This makes them a compatible replacement for existing encoders when migrating to a higher safety level of operation. DSU9H & DSU9X offer 30 mm standard through shaft models with optional reduction sleeves for mounting on smaller diameter shafts. The encoder body is 90mm in diameter, available in aluminum or stainless steel.(A)Continuous max. speed – ½ max. load – according to ISO 281: 1990, L10(B)Device must be supplied by a Class 2, LPS or SELV limited energy source.(C) UL listed:Electrical ConnectionsNote: All connections are UL certiﬁed, except G3 and GP RESOLUTIONS1024 2048DSU9H – radial cable and 20mm reduction hubDSU9X- radial M23 connector - IP66 optionCOUPLING INTERFACE Stator coupling kit M9445/045Tether arm kit M9445/046For a safe installation according to the required safety level needed in the application, refer to the user safety User Manual.The safety User Manual provides the technical information (drawings, electrical data, etc...) for a safe integration.A quick installation guide is provided with each encoder for use by the technician who installs the device on the equipment.GENERAL NOTESORDERING OPTIONSContact the factory for special versions, ex: resolution, connection, ﬂange...* Parts mounted on encoder and fasteners included in the encoder box.AGENCY APPROVALS & CERTIFICATIONSBEI Sensors SASSensata TechnologiesEspace Européen de l’Entreprise9, rue de CopenhagueB.P. 70044 SchiltigheimF 67013 Strasbourg CedexTélFaxMailWeb: +33 (0)3 88 20 80 80: +33 (0)3 88 20 87 87:****************************: Americas+1 (800) 350 2727*******************Europe, Middle East & Africa +33 (3) 88 20 8080****************************Asia Paciﬁc*************************.com China +86 (21) 2306 1500Japan +81 (45) 277 7117Korea +82 (31) 601 2004India +91 (80) 67920890Rest of Asia +886 (2) 27602006 ext 2808Page 7CONTACT USSensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that speciﬁcally described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice.Buyers are authorized to use Sensata data sheets with the Sensata component(s) identiﬁed in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF.All products are sold subject to Sensata’s terms and conditions of sale supplied at SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION Made in FranceACCESORIES。

金库利模型2635A 2636A系统源电流器说明书

Keithley Model 2635A/2636A System SourceMeter® Specifications1.SPECIFICATION CONDITIONSThis document contains specifications and supplemental information for the Models 2635A and 2636A System SourceMeters ®. Specifications are the standards against which the Models 2635A and 2636A are tested. Upon leaving the factory the 2635A and 2636A meet these specifications. Supplemental and typical values are non-warranted, apply at 23°C, and are provided solely as useful information.Accuracy specifications are applicable for both Normal and High Capacitance Modes.The source and measurement accuracies are specified at the SourceMeters ® CHANNEL A (2635A and 2636A) or SourceMeters ® CHANNEL B (2636A) terminals under the following conditions: 1.23°C ± 5°C, < 70% relative humidity.2.After two-hour warm-up.3.Speed normal (1 NPLC).4.A/D auto-zero enabled.5.Remote sense operation or properly zeroed local operation.6.Calibration period: one year.2.SOURCE SPECIFICATIONSVOLTAGE SOURCE SPECIFICATIONSSpecifications Category SpecificationsRANGE PROGRAMMING RESOLUTION ACCURACY (1 Year) 23°C ± 5°C± (% rdg. + volts) TYPICAL NOISE(peak-peak) 0.1 Hz–10 Hz 200.000 mV 5 µV 0.02% + 375 µV 20 µV 2.00000 V 50 µV 0.02% + 600 µV 50 µV 20.0000 V 500 µV 0.02% + 5 mV 300 µV Voltage Programming Accuracy 1200.000 V5 mV0.02% + 50 mV2 mVTemperature Coefficient 2 ± (0.15 × accuracy specification)/°C•For temperatures (0°–18°C & 28°–50°C)Maximum Output Powerand Source/Sink Limits 3 30.3 W per channel maximum. •± 20.2 V @ ± 1.5 A •± 202 V @ ± 100 mA•Four-quadrant source or sink operation.Voltage Regulation Line: 0.01% of rangeLoad: ± (0.01% of range + 100 µV).Noise10 Hz – 20 MHz< 20 mV peak-peak (typical), < 3 mV RMS (typical) •20 V range1Add 50 µV to source accuracy specifications per volt of HI lead drop.2High Capacitance Mode accuracy is applicable at 23°C ± 5°C only.3Full power source operation regardless of load to 30°C ambient. Above 30°C and/or power sink operation, refer to “Operating Boundaries” in the Series 2600A Reference Manual for additional power derating information.Model 2635A/2636ASystem SourceMeter® SpecificationsSpecifications Category SpecificationsCurrentLimit/Compliance 4 Bipolar current limit (compliance) set with single value. Minimum value is 100 pA. Accuracy is the same as current source. Overshoot< ± (0.1% + 10 mV) (typical )•Step size = 10% to 90% of range, resistive load, maximum current limit/compliance.Guard Offset Voltage< 4 mV•Current < 10 mACURRENT SOURCE SPECIFICATIONSSpecifications Category SpecificationsRANGE PROGRAMMING RESOLUTION ACCURACY (1 Year) 23°C ± 5°C± (% rdg. + amps) TYPICAL NOISE(peak-peak) 0.1 Hz–10 Hz 1.00000 nA 20 fA 0.15% + 2 pA 800 fA 10.0000 nA 200 fA 0.15% + 5 pA 2 pA 100.000 nA 2 pA 0.06% + 50 pA 5 pA 1.00000 µA20 pA 0.03% + 700 pA 25 pA 10.0000 µA 200 pA 0.03% + 5 nA 60 pA 100.000 µA 2 nA 0.03% + 60 nA 3 nA 1.00000 mA 20 nA 0.03% + 300 nA 6 nA 10.0000 mA 200 nA 0.03% + 6 µA 200 nA 100.000 mA 2 µA 0.03% + 30 µA 600 nA 1.00000 A 520 µA 0.05% + 1.8 mA 70 µA 1.50000 A 550 µA0.06% + 4 mA 150 µACurrent ProgrammingAccuracy10.0000 A 5,6 200µA 0.5% + 40 mA (typical)Temperature Coefficient 7± (0.15 × accuracy specification)/°C•For temperatures (0° – 18°C & 28° – 50°C)4For sink mode operation (quadrants II and IV), add 0.06% of limit range to the corresponding current limit accuracy specifications. Specifications apply with sink mode enabled.5Full power source operation regardless of load to 30°C ambient. Above 30°C and/or power sink operation, refer to “Operating Boundaries” in the Series 2600A Reference Manual for additional power derating information.610A range accessible only in pulse mode.7High Capacitance Mode accuracy is applicable at 23°C ± 5°C only.Model 2635A/2636ASystem SourceMeter® SpecificationsSpecifications Category SpecificationsMaximum Output Power and Source/Sink Limits 8 30.3 W per channel maximum. •± 1.515 A @ ± 20 V •± 101 mA @ ± 200 V•Four-quadrant source or sink operation.Current Regulation Line: 0.01% of rangeLoad: ± (0.01% of range + 100pA).VoltageLimit/Compliance 9 Bipolar voltage limit (compliance) set with single value. Minimum value is 20 mV. Accuracy is the same as voltage source. Overshoot< ± 0.1% (typical)•step size = 10% to 90% of range, resistive load•See CURRENT SOURCE OUTPUT SETTLING TIME for additional test conditionsADDITIONAL SOURCE SPECIFICATIONS Specifications Category SpecificationsTransient Response Time< 70 µs for the output to recover to within 0.1% for a 10% to 90% step change in load.Time required to reach within 0.1% of final value after source level command is processed on a fixed range.Range Settling Time 200 mV < 50 µs (typical) 2 V < 50 µs (typical) 20 V < 110 µs (typical) Voltage Source OutputSettling Time200 V < 700 µs (typical)Time required to reach within 0.1% of final value after source level command is processed on a fixed range.•Values below for Iout × Rload = 2 V unless notedCurrent Range Settling Time 1.5 A – 1 A < 120 µs (typical) (Rload > 6 ) 100 mA – 10 mA < 80 µs (typical)1 mA < 100 µs (typical) 100 µA < 150 µs (typical) 10 µA < 500 µs (typical) 1 µA <2 ms (typical) 100 nA < 20 ms (typical) 10 nA < 40 ms (typical) Current Source Output Settling Time1 nA < 150 ms (typical)8Full power source operation regardless of load to 30°C ambient. Above 30°C and/or power sink operation, refer to “Operating Boundaries” in the Series 2600A Reference Manual for additional power derating information.9For sink mode operation (quadrants II and IV), add 10% of compliance range and ±0.02% of limit setting to corresponding voltage source specification. For 200mV range add an additional 120mV of uncertainty.Model 2635A/2636ASystem SourceMeter® SpecificationsSpecifications Category SpecificationsDC Floating Voltage Output can be floated up to ± 250 VDCRemote Sense Operating Range10Maximum voltage between HI and SENSE HI = 3 V Maximum voltage between LO and SENSE LO = 3VVoltage Output Headroom 200 V Range•Maximum output voltage = 202.3 V – total voltage drop across source leads. (maximum 1 Ω per source lead)20 V Range•Maximum output voltage = 23.3 V – total voltage drop across source leads. (maximum 1 Ω per source lead)Over TemperatureProtectionInternally sensed temperature overload puts unit in standby mode.Voltage Source Range Change Overshoot < 300 mV + 0.1% of larger range (typical) •Overshoot into a 200 kΩ load, 20 MHz BWCurrent Source Range Change Overshoot < 5% of larger range + 300 mV/Rload (typical – With source settling set to SETTLE_SMOOTH_100NA)•See CURRENT SOURCE OUTPUT SETTLING TIME for additional test conditions.PULSE SPECIFICATIONSSpecifications Category SpecificationsRegionCircled On Quadrant DiagramMaximumCurrent LimitMaximumPulse Width11MaximumDuty Cycle121 100 mA at 200 V DC, no limit100%1 1.5 A at 20 V DC, no limit 100%2 1 A at 180 V 8.5 ms 1%313 1 A at 200V 2.2 ms 1% Pulse Specifications4 10 A at5 V 1 ms 2.2%10Add 50 µV to source accuracy specifications per volt of HI lead drop.11 Times measured from the start of pulse to the start off-time; see figure below.12Thermally limited in sink mode (quadrants 2 and 4) and ambient temperatures above 30°C. See power equations in the Reference Manual for more information.13Voltage source operation with 1.5 A current limit.Model 2635A/2636ASystem SourceMeter® SpecificationsTypical performance for minimum settled pulse widths: Typical tests were performed using remote opera 14tion, 4W sense, and best fixed measurement range. Fo n on p ripts, e M Source Value Source Sett r more informatio ulse sc see the Series 2600A Referenc anual.Load ling (% of range)Min. Pulse Width5 V 0.5 Ω1%300 µs 20 V 200 Ω0.2%200 µs 180 V 180 Ω0.2% 5 ms 200 V (1.5 A Limit) 200 0.2%Ω 1.5 ms100 mA 200 Ω1%200 µs 1 A 200 Ω1%500 µs 1 A 180 Ω0.2% 5 ms 10 A 0.5 Ω0.5%300 µs 15Times measured from the start of pulse to the start off-time; see figure below.Model 2635A/2636ASystem SourceMeter® Specifications3.METER SPECIFICATIONSVOLTAGE MEASUREMENT SPECIFICATIONS Specifications Category SpecificationsRANGEDISPLAYRESOLUTION18INPUT IMPEDANCE ACCURACY (1 Year)23°C ± 5°C ± (% rdg. + volts) 200.000 mV 1 µV >1014Ω0.015% + 225 µV 2.00000 V 10 µV >1014 Ω0.02% + 350 µV 20.0000 V 100 µV >1014 Ω0.015% + 5 mV Voltage Measurement Accuracy 16,17200.000 V1 mV>1014 Ω0.015% + 50 mVTemperature Coefficient 19± (0.15 × accuracy specification)/°C•For temperatures (0°–18°C & 28°–50°C)16Add 50µV to source accuracy specifications per volt of HI lead drop.17De-rate accuracy specifications for NPLC setting < 1 by increasing error term. Add appropriate % of range term using table below.NPLC Setting 200 mV Range 2 V – 200 V Ranges 100 nA Range 1 µA – 100 mA Ranges 1 A – 1.5 ARanges0.10.01%0.01%0.01%0.01%0.01%0.010.08 %0.07%0.1 %0.05%0.05%0.0010.8 %0.6 %1 % 0.5 % 1.1 % 18Applies when in single channel display mode.19High Capacitance Mode accuracy is applicable at 23°C ± 5°C only.Model 2635A/2636ASystem SourceMeter® SpecificationsCURRENT MEASUREMENT SPECIFICATIONS Specifications Category SpecificationsRANGEDISPLAY RESOLUTION 20VOLTAGEBURDEN 21ACCURACY (1 Year)23°C ± 5°C ± (% rdg. + amps) 100.000 pA 22,23 1 fA < 1 mV 0.15% + 120 fA 1.00000 nA 22,2410 fA < 1 mV 0.15% + 240 fA 10.0000 nA 100 fA < 1 mV 0.15% + 3 pA 100.000 nA1 pA < 1 mV 0.06% + 40 pA 1.00000 µA 10 pA < 1 mV 0.025% + 400 pA 10.0000 µA 100 pA < 1 mV 0.025% +1.5 nA 100.000 µA 1 nA < 1 mV 0.02% + 25 nA 1.00000 mA 10 nA < 1 mV 0.02% +200 nA 10.0000 mA 100 nA < 1 mV 0.02% + 2.5 µA 100.000 mA 1 µA < 1 mV 0.02% +20 µA 1.00000 A 10 µA < 1 mV 0.03% +1.5 mA 1.50000 A 10 µA < 1 mV 0.05% + 3.5 mA Current Measurement Accuracy 1710.000025A100 µA< 1 mV0.4% + 25 mATime required to reach within 0.1% of final value after source level command is processed on a fixed range.•Values below for Vout = 2 V unless notedCurrent Range Settling TimeCurrent Measure 26 Settling Time(Time for measurement to settle after a Vstep) 1 mA < 100 µs (typical)Temperature Coefficient 27± (0.15 × accuracy specification)/°C•For temperatures (0°–18°C & 28°–50°C)20 Applies when in single channel display mode.21Four-wire remote sense only and with current meter mode selected. Voltage measure set to 200 mV or 2 V range only.2210-NPLC, 11-Point Median Filter, < 200V range, measurements made within 1 hour after zeroing. 23°C ± 1°C 23Under default specification conditions: ±(0.15% + 750 fA).24Under default specification conditions: ±(0.15% + 1 pA).2510 A range accessible only in pulse mode.26Delay factor set to 1. Compliance equal to 100 mA.27High Capacitance Mode accuracy is applicable at 23°C ± 5°C only.Model 2635A/2636ASystem SourceMeter® SpecificationsSpecifications Category SpecificationsSpeedMaximum measurement time to memory for 60Hz(50Hz) ACCURACY (1 Year)23°C ± 5°C ± (% rdg. + ohms)Fast 1.1 ms (1.2 ms) 5% + 10 Ω Medium 4.1 ms (5 ms) 5% + 1 Ω Contact Check Specifications 28Slow36 ms (42 ms)5% + 0.3 ΩADDITIONAL METER SPECIFICATIONS Specifications Category SpecificationsMaximum Load ImpedanceNormal Mode 10nF (typical)High Capacitance Mode50uF(typical)Common Mode Voltage 250 VDC Common Mode Isolation >1 G Ω< 4500 pFOverrange101% of source range 102% of measure range Maximum Sense Lead Resistance1 k Ω for rated accuracy Sense High Input Impedance>1014Ω28Includes measurement of SENSE HI to HI and SENSE LO to LO contact resistances.Model 2635A/2636ASystem SourceMeter® SpecificationsHIGH CAPACITANCE MODE 29,30,31Specifications CategorySpecifications Accuracy SpecificationsAccuracy specifications are applicable in both Normal and High Capacitance Modes.Time required to reach within 0.1% of final value after source level command is processed on a fixed range.Current limit = 1AVoltage Source RangeSettling Time withC load = 4.7µF 200 mV600 µs (typical) 2 V600 µs (typical) 20 V1.5 ms (typical) Voltage Source Output Settling Time200 V20 ms (typical) Time required to reach within 0.1% of final value after voltage source is stabilized on a fixed range.•Values below for Vout = 2 V unless notedCurrent Measure RangeSettling Time 1.5 A – 1 A< 120 µs (typical) (Rload > 6 Ω) 100 mA – 10 mA< 100 µs (typical) 1 mA< 3 ms (typical) 100 µA< 3 ms (typical) 10 µA< 230 ms (typical) Current Measure Settling Time1 µA < 230 ms (typical) Capacitor Leakage PerformanceUsing HIGH-C scripts 32200 ms (typical) @ 50 nALoad = 5µF||10M ΩTest: 5V step & measureMode Change Delay100 µA Current Range and above:Delay into High Capacitance Mode: 11 ms Delay out of High Capacitance Mode: 11 ms 1 µA and 10 µA Current Ranges:Delay into High Capacitance Mode: 250 ms Delay out of High Capacitance Mode: 11 ms Voltmeter Input Impedance 30 G Ω in parallel with 3300 pF Noise10 Hz – 20 MHz< 30 mV peak-peak (typical)∙20 V Range29High Capacitance Mode specifications are for DC measurements only. 30100 nA range and below are not available in High Capacitance Mode.31High Capacitance Mode utilizes locked ranges. Auto Range is disabled . 32Part of KI Factory scripts. See the reference manual for details.Model 2635A/2636ASystem SourceMeter® Specifications Specifications Category SpecificationsVoltage Source Range Change Overshoot < 400 mV + 0.1% of larger range (typical) •For 20 V range and below•Overshoot into an 200 k load, 20 MHz BW4.GENERALSpecifications Category SpecificationsIEEE-488 IEEE Std 488.1 compliant. Supports IEEE Std 488.2 common commands and status model topology.RS-232 Baud rates from 300bps to 115200bps.Programmable number of data bits, parity type, and flow control (RTS/CTS hardware or none). When not programmed as the active host interface, the SourceMeter can use the RS-232 interface to control other –instrumentationEthernet RJ-45 connector, LXI Class C, 10/100BT, Auto MDIXLXI Compliance LXI Class C 1.2Total Output Trigger Response Time: 245 µs min., 280 µs typ., (not specified) max.Receive LAN[0-7] Event Delay: UnknownGenerate LAN[0-7] Event Delay: UnknownExpansion Interface The TSP-Link™ expansion interface allows TSP™ enabled instruments to trigger and communicate with each other.Cable Type: Category 5e or higher LAN crossover cable.3 meters maximum between each TSP enabled instrumentUSB USB 2.0 Host ControllerPower Supply 100 V to 250 VAC, 50 Hz – 60 Hz (auto sensing), 250 VA maxModel 2635A/2636ASystem SourceMeter® Specifications Connector: 25-pin female DInput/Output Pins: 14 open drain I/O bitsModel 2635A/2636ASystem SourceMeter® Specifications Specifications Category SpecificationsCooling Forced air. Side intake and rear exhaust. One side must be unobstructed when rack mountedWarranty1yearEMC Conforms to European Union Directive 2004/108/EEC, EN 61326-1Safety Conforms to European Union Directive 73/23/EEC, EN 61010-1, and UL 61010-1Dimensions 89 mm high × 213 mm wide × 460 mm deep (31⁄2 in × 83⁄8 in × 171⁄2 in). Bench Configuration (with handle & feet): 104 mm high × 238 mm wide × 460 mm deep (41⁄8 in × 93⁄8 in × 171⁄2 in)Weight 2635A: 4.75 kg (10.4 lbs). 2636A: 5.50 kg (12.0 lbs).Environment For indoor use only.Altitude: Maximum 2000 meters above sea levelOperating: 0°– 50°C, 70% R.H. up to 35°C. Derate 3% R.H./°C, 35°– 50°C Storage: – 25°C to 65°CModel 2635A/2636ASystem SourceMeter® Specifications 5.MEASUREMENT SPEED SPECIFICATIONS33,34,35Maximum Sweep Operation Rates (operations per second) for 60Hz (50Hz):A/D converterspeed TriggeroriginMeasure tomemoryusinguser scriptsMeasure toGPIBusinguser scriptsSourcemeasure tomemoryusinguser scriptsSourcemeasure toGPIBusinguser scriptsSourcemeasure tomemoryusingsweep APISourcemeasure toGPIBusingsweep API0.001 NPLC Internal 20000 (20000) 9800 (9800) 7000 (7000) 6200 (6200)12000(12000)5900 (5900)0.001 NPLC Digital I/O 8100 (8100) 7100 (7100) 5500 (5500) 5100 (5100)11200(11200)5700 (5700)0.01 NPLC Internal 4900 (4000) 3900 (3400) 3400 (3000) 3200 (2900) 4200 (3700) 4000 (3500)0.01 NPLC Digital I/O 3500 (3100) 3400 (3000) 3000 (2700) 2900 (2600) 4150 (3650) 3800 (3400)0.1 NPLC Internal 580 (480) 560 (470) 550 (465) 550 (460) 560 (470) 545 (460)0.1 NPLC Digital I/O 550 (460) 550 (460) 540 (450) 540 (450) 560 (470) 545 (460)1.0 NPLC Internal 59 (49) 59 (49) 59 (49) 59 (49) 59 (49) 59 (49)1.0 NPLC Digital I/O 58 (48) 58 (49) 59 (49) 59 (49) 59 (49) 59 (49) Maximum Single Measurement Rates (operations per second) for 60Hz (50Hz):A/D converterspeed TriggeroriginMeasure to GPIBSource measureto GPIBSource measure pass/fail to GPIB0.001 NPLC Internal 1900 (1800) 1400 (1400) 1400 (1400)0.01 NPLC Internal 1450 (1400) 1200 (1100) 1100 (1100)0.1 NPLC Internal 450 (390) 425 (370) 425 (375)1.0 NPLC Internal 58 (48) 57 (48) 57 (48)Maximum measurement range change rate: >7000/second for >10 µA typical. When changing to or from a range ≥1A, maximum rate is >2200/second typical.Maximum source range change rate: >400/second >10 µA typical. When changing to or from a range ≥1A, maximum rate is >190/second typical.Maximum source function change rate: >1000/second, typical.Command processing time: Maximum time required for the output to begin to change following the receipt of the smux.source.levelv or smux.source.leveli command. <1ms typical.33 Tests performed with a 2636A on Channel A using the following equipment: Computer hardware (Intel® Pentium® 4 2.4 GHz,2 GB RAM, National Instruments™ PCI-GPIB). Driver (NI-488.2 Version 2.2 PCI-GPIB). Software (Microsoft® Windows® XP,Microsoft® Visual Studio® 2010, VISA™ version 4.1).34 Exclude current measurement ranges less than 1mA.35 2635A/2636A with default measurement delays and filters disabled.Model 2635A/2636ASystem SourceMeter® Specifications6.TRIGGERING AND SYNCHRONIZATION SPECIFICATIONSTriggering:Trigger in to trigger out: 0.5μs, typical.Trigger in to source change:3610 μs, typical.Trigger Timer accuracy: ±2μs, typical.change36 after LXI Trigger: 280μs, typical.SourceSynchronization:Single-node synchronized source change:36<0.5μs, typical.Multi-node synchronized source change:36<0.5μs, typical.7.SUPPLEMENTAL INFORMATIONFront Panel Interface:Two-line vacuum fluorescent display (VFD) with keypad and rotary knob.Display:∙Show error messages and user-defined messages∙Display source and limit settings∙Show current and voltage measurements∙View measurements stored in dedicated reading buffersKeypad operations:∙Change host interface settings∙Save and restore instrument setups∙Load and run factory and user-defined test scripts (i.e., sequences) that prompt for input and send results to the display∙Store measurements into dedicated reading buffersProgramming:Embedded Test Script Processor (TSP): Accessible from any host interface.∙Responds to individual instrument control commands.∙Responds to high-speed test scripts comprised of instrument control commands and Test Script Language (TSL) statements (for example branching, looping, and math).∙Able to execute high-speed test scripts stored in memory without host intervention.Minimum user memory available: 16MB (approximately 250,000 lines of TSL code).Test Script Builder: Integrated development environment for building, running, and managing TSP scripts. Includes an instrument console for communicating with any TSP-enabled instrument in an interactive manner. Requires:∙VISA (NI-VISA included on CD)∙Microsoft .NET Framework (included on CD)∙Keithley I/O Layer (included on CD)36Fixed source range, with no polarity change.Model 2635A/2636ASystem SourceMeter® Specifications TSP™ Express (embedded):Tool that allows users to quickly and easily perform common I-V tests withoutprogramming or installing software. To run TSP Express, you need:∙Java™ Platform, Standard Edition 6∙Microsoft® Internet Explorer®, Mozilla® Firefox®, or another Java-compatible web browserSoftware Interface: TSP Express (embedded), direct GPIB/VISA, read/write with Microsoft® Visual Basic®, Visual C/C++®, Visual C#®, LabVIEW™, CEC TestPoint™ Data Acquisition Software Package, NI LabWindows™/CVI, and so on.Reading Buffers:Non-Volatile memory utilizes dedicated storage area(s) reserved for measurement data. Reading buffers are arrays of measurement elements. Each element can hold the following items:∙Measurement∙Source setting (at the time the measurement was taken)∙Measurement status∙Range information∙TimestampTwo reading buffers are reserved for each SourceMeter channel. Reading buffers can be filled using the front panel STORE key, and retrieved using the RECALL key or host interface.Buffer Size, with timestamp and source setting: > 60,000 samples.Buffer Size, without timestamp and source setting: > 140,000 samples.System Expansion:The TSP-Link expansion interface allows TSP-enabled instruments to trigger and communicate with each other. See figure below:Model 2635A/2636ASystem SourceMeter® SpecificationsEach SourceMeter has two TSP-Link connectors to make it easier to connect instruments together in sequence.∙Once SourceMeter instruments are interconnected via TSP-Link, a computer can access all of the resources of each SourceMeter via the host interface of any SourceMeter.∙ A maximum of 32 TSP-Link nodes can be interconnected. Each SourceMeter consumes one TSP-Link node.TIMER:Free-running 47-bit counter with 1MHz clock input. Reset each time instrument powers up. Rolls over every 4 years.Timestamp: TIMER value automatically saved when each measurement is triggered.Resolution: 1μs.Timestamp Accuracy: ±100ppm.。

蓝领星球产品说明书

感谢您购买和使用格兰仕空调使用前请仔细阅读本使用安装说明书，并妥善保存顺德市格兰仕空调电器有限公司使用安装说明书KF-20GW/A1 KFR-20GW/A1 KFR-20GW/dA10G 0G 0G 25252525G 25G 25G 26262626G 26G 26G KF-2GW/ 1 KFR-2GW/ 1 KFR-2GW/d 1KF-23GW/A1 KFR-23GW/A1 KFR-23GW/dA1KF-23GW/G1 KFR-23GW/G1 KFR-23GW/dG1KF-GW/A1 KFR-GW/A1 KFR-GW/dA1KF-GW/ 1 KFR-GW/ 1 KFR-GW/d 1KF-GW/A1 KFR-GW/A1 KFR-GW/dA1KF-GW/ 1 KFR-GW/ 1 KFR-GW/d 1获取更信搜索蓝领星球目录 (1)使用注意事项...............................................2空调各部分名称.............................................3空调的使用说明.............................................4故障现象与分析.............................................6性能参数表.................................................7安装说明 (8)目录获取更多资料微信搜索蓝领星球使用注意事项使用空调器时,务必请仔细阅读此使用注意事项,并请在空调器的使用过程中遵守;否则可能会给空调器造成损害或危及您或他人的人身、财产安全。

使用前，检查地线是否可靠连接，空气过滤网是否安装好，室内机和室外机进风口或出风口是否阻塞。

空调器所用的线路容量必须足够，并连接有合适的漏电断路器、保险丝。

EtherNet IP IO-Link集成：使用费斯托EtherNet IP产品控制IO-Link设

Application NoteEtherNet/IP IO-Link IntegrationControlling IO-Link Devices with Festo EtherNet/IP Products CTEU-EP,CPX-FB36,CPX-CTEL-LK100116Title ........................................................................................................................ EtherNet/IP IO-Link Integration Version ............................................................................................................................................................. 1.30 Document no. . (100116)Original .................................................................................................................................................................en Author ............................................................................................................................................................. F estoLast saved ............................................................................................................................................ 21.12.2016Copyright NoticeThis documentation is the intellectual property of Festo AG & Co. KG, which also has the exclusive copyright. Any modification of the content, duplication or reprinting of this documentation as well as distribution to third par-ties can only be made with the express consent of Festo AG & Co. KG.Festo AG & Co KG reserves the right to make modifications to this document in whole or in part. All brand and product names are trademarks or registered trademarks of their respective owners.Legal NoticeHardware, software, operating systems and drivers may only be used for the applications described and only in conjunction with components recommended by Festo AG & Co. KG.Festo AG & Co. KG does not accept any liability for damages arising from the use of any incorrect or incomplete information contained in this documentation or any information missing therefrom.Defects resulting from the improper handling of devices and modules are excluded from the warranty.The data and information specified in this document should not be used for the implementation of safety func-tions relating to the protection of personnel and machinery.No liability is accepted for claims for damages arising from a failure or functional defect. In other respects, the regulations with regard to liability from the terms and conditions of delivery, payment and use of software of Festo AG & Co. KG, which can be found at and can be supplied on request, shall apply.All data contained in this document do not represent guaranteed specifications, particularly with regard to func-tionality, condition or quality, in the legal sense.The information in this document serves only as basic information for the implementation of a specific, hypo-thetical application and is in no way intended as a substitute for the operating instructions of the respective manufacturers and the design and testing of the respective application by the user.The operating instructions for Festo products can be found at .Users of this document (application note) must verify that all functions described here also work correctly in the application. By reading this document and adhering to the specifications contained therein, users are also solely responsible for their own application.(Festo AG & CO. KG, D-73726 Esslingen, 2016)Internet: E-Mail: *******************************Table of contents1Components/Software used (4)2Introduction (5)3Setup of Process data for IO-Link Devices (6)3.1Typical Configuration of CPX-FB36 with CPX-CTEL-LK (6)3.2Typical Configuration of CTEU-EP (7)4Web Server Support for IO-Link Devices (8)4.1CPX-FB36 with CPX-CTEL-LK (8)4.2CTEU-EP (10)5Methods for Validating the IO-Link Configuration (11)5.1CPX-FB36 (11)5.2CTEU (12)6Diagnostic Reporting: (13)6.1CPX-FB36 (13)6.1.1Step 1: Set VendorID and DeviceID (13)6.1.2Step 2: Monitor Diagnostics (15)6.1.3Step 3: Read Specific Error Information (15)6.2CTEU-EP (16)6.2.1Step 1: Set VendorID and DeviceID (16)6.2.2Step 2: Monitor Diagnostics (16)6.2.3Step 3: Read Specific Error Information (17)7Parameterize via Mailbox Function: (18)7.1.1MSG Instruction for Read Access (21)7.1.2MSG Instruction for Write Access (23)8AOI Support: (25)8.1Read Parameters of RFID Reader (25)8.2Write Parameters to RFID Reader (27)9CTEU – EDS AOP to Parameterize Festo I-Port devices (29)Components/Software used 1Components/Software usedTable 1.1: Components/Software usedIntroduction2IntroductionThe CPX-FB36 and CTEU-EP EtherNet/IP busnodes both support the ability to add 3rd party IO-Link devices. Therefore, additional products such as RFID readers, Light stacks, and any other IO-link devices can be added to CPX or CTEU with EtherNet/IP.These features, for supporting IO-Link, are only roughly documented in the standard manuals. This application note is intended to support these additional features. These specifically include; how to validate the IO-link de-vices, how to read diagnostics events, and how to set IO-link parameters. Details of the various objects required for these functions are documented below.3Setup of Process data for IO-Link DevicesFollow the instructions from the standard manuals for CPX-FB36 or CTEU-EP for the basic setup of the I/O-De-vices in your Engineering Software. The following examples are showing the typical integration in the “St udio 5000” Engineering Software provided by Rockwell Automation.3.1Typical Configuration of CPX-FB36 with CPX-CTEL-LKNoteThere must be at least one CPX-CTEL-LK module in the CPX terminal•The I/O-size of the CPX-CTEL-LK module has to be large enough to hold the data of the connected IO-Link devices. Refer to the CPX-CTEL-LK manual for details on the corresponding settings of theDIL switches3.2Typical Configuration of CTEU-EPBelow is an example with a fixed dual port configuration with a separate status for the CTEU-EP bus node. This allows for maximum device type size, and keeps the I/O in equal sizes.InformationenThe shown configuration also adds an additional Status-Byte for diagnostics without the need tochange the default DIL-Switch settings by using Comm. Format “Data – SINT –With Status” and as-sembly instance 103 as Status Input.Note•The CTEU-EP must be configured with an assembly instance large enough for the IO-link device.Refer to the CTEU-EP manual. The size of the IO data determined by the assembly instances mustalso be large enough for the IO-link device.•The I/O-size of the CPX-CTEL-LK module has to be large enough to hold the data of the connected IO-Link devices. Refer to the CPX-CTEL-LK manual for details on the corresponding settings of theDIL switchesNoteIn both, the CPX and CTEU, the process data will be automatically transferred to the device. However, due to the little-endian / big-endian difference in EtherNet/IP vs. IO-Link, the byte order will beswapped. This must be handled in the controller logic.4Web Server Support for IO-Link DevicesFor both the CPX-FB36 and the CTEU-EP, there are IT tools available for reading the diagnostics and status of IO-link devices.4.1CPX-FB36 with CPX-CTEL-LKFor the CPX-FB36, a web server and the Festo Maintenance Tool both display the relevant IO-link device infor-mation and diagnostics.Figure 1: CPX I-Port Master for IO-Link devices – Diagnosis via Web ServerFigure 2: CPX I-Port Master for IO-Link devices – Diagnosis via FMT4.2CTEU-EPFor the CTEU-EP, there is a Web server available to display the relevant IO-Link status and diagnostics:Figure 3: The CTEU web-server will show the IO-Link devices connected5Methods for Validating the IO-Link ConfigurationFor a customer to validate a configuration, he must retrieve the vendor and device ID manually via an explicit message. This will assure the correct device is connected to an IO-link port.5.1CPX-FB36For the FB36, the General Object Parameter Object 101d will be used. This currently exists in the CPX system since these values are stored as parameters from the CTEL-LK. An explicit message to Object class 101 with the correct instance and attribute based on the channel & slot number will work.Figure 4: This ladder example will retrieve the Vendor ID of a device in port 2 of the CTEL-LK plugged into the 5th CPX slot.Table 5.1: Service code table to Read Device Type and Vendor ID to CPX-FB365.2CTEUFirst, each of the CTEU ports must be set to allow 3rd party IO-link devices. Use the CTEUPort Configuration Object 107d. The details are as follows:Table 5.2: CTEU Service code table to Set IO-Link modeNext, the CTEU Slave Information Object 104d will be used. This object stores device information for each of the 2 CTEU ports. An explicit message to Object class 104d with the correct instance and attribute based on port 1 or 2 will allow the user to retrieve the Vendor or Device ID.Table 5.3: Service code table to Read Device Type and Vendor ID from CTEU-EP Slave Information Object6Diagnostic Reporting:Both the CPX and CTEU can be programmed in advance to detect and report errors related to the IO-link chan-nels and devices. This includes if a device is missing, changed, or faulted.This is generally a 3 step process:1.Write the specific information to a “Port Configuration Object” via an explicit message. The data will be theVendor ID and the Device ID plugged into each port.2.Monitor general diagnostics provided by the CPX or CTEU either from the input table or status table.3.Read specific error information from a CIP object via an explicit message.The next chapters describe in detail how these 3 steps apply to CPX-FB36 und CTEU-EP.6.1CPX-FB366.1.1Step 1: Set VendorID and DeviceIDUse the following table to write the specific device information to the FB36 IO-Link Port Configuration Object 140d.:Table 6.1: CPX-FB36 Service code table to Write to IO-Link Port Configuration ObjectSince this object requires access to a data structure, this example will show how to enter the service data for an IO-Link device in the Rockwell Logix environment with a CPX-FB36 /CPX-CTEL-LK:1.Create a user Defined Data Type to include these 4 variables:Figure 6.12.Create Controller Tags to be used as a source and destination for a message instruction to write / read to themodule. The variables are of the data type created. Load the source data with the appropriate data for the IO-Link device.e a MSG instruction to load the data to the FB36 so the Vendor ID, Device ID, and choice to monitor theComm_Error are entered. Instance 6 means CPX module number 5, and attribute 1 is for CPX-CTEL-LK channel1.Figure 6.24.The data can be read in a similar manner using a Get Attribute Single service type in a separate MSG instruc-tion. Copy the data to a destination element of the same data type.6.1.2Step 2: Monitor DiagnosticsMonitor basic CPX diagnostics, a fault with bits 3 (fault at function module) and 7 (other fault) of the CPX diag-nostic byte should occur.6.1.3Step 3: Read Specific Error InformationUse the General Module Parameter Object 101d to read the specific error codes form the CPX-FB36 / CPX-CTEL-LK. This is the same object as used to validate the IO-link device, however, in this case, use an explicit message to read attribute 7B or 7D for specific error codes of port 1 or 2 respectively.Table 6.2: Service code table to Read Error code from CPX-FB366.2CTEU-EP6.2.1Step 1: Set VendorID and DeviceIDUse the following table to write the specific device information to the CTEU Port Configuration Object 107d. The details are as follows:Table 6.3: For CTEU Service code table to Write Device Type and Vendor ID6.2.2Step 2: Monitor DiagnosticsMonitor basic CTEU diagnostics for a fault with an I-port channel.6.2.3Step 3: Read Specific Error InformationUse the Status Object 103d to read the specific error codes from the CTEU.Table 6.4: Service code table to Read Error from IO-Link device with CTEU-EP “Port Status” is a bitfield with the following meaning:Table 6.5: Description of Port Status7 Parameterize via Mailbox Function:IO-Link Device parameters are accessed via the ISDU Access Object 768d.This object exists in both the CPX-FB36 and the CTEU-EP. It is handled exactly the same in either case.Informationen“ISDU -Access” (Index Service Data Unit Access) is the mechanism used for accessing data objects in all IO-Link devices.The parameters are device specific, and can be both read / write. The user shall use a MSG instruction to access these parameters. This is known as the “Mailbox Function”. Since the MSG instruction must use the source ele-ment for the index number, one index at a time can be accessed.The following tables show the general Mailbox Function message instruction requirements:Table 7.1: Message Instruction for ISDU Access (read)Table 7.2: Message Instruction for ISDU Access (write)Table 7.3: Status- and errorcodes for read and write ISDU accessWe will use a commercially available IO-Link RFID tag reader model number BIS-4xx as an example with CTEU-EP. Below are the device specific parameters that may need to be modified for proper operation.Figure 7.17.1.1MSG Instruction for Read AccessTo read sub-index 3, the user must create the following:∙“Source” Controller Tag of type SINT[3] for–SINT[0]=40h (index)–SINT[1]=0–SINT[2]=3h (sub-index)∙“Destination” Controller Tag of type SINT[3] for–SINT[0]=reserve or port error–SINT[1]=value returned–SINT[2]=reserve for 2 byte sub-index∙MSG instructionThe controller tags are created as follows:∙RFID_RD_source_CTEU = SINT[3]∙RFID_RD_destination_CTEU = SINT[3]Figure 7.2This shows the source data index 40h / sub-index 3h, plus the return of 7h in the destination. The table data to fill the message instruction is as follows:Table 7.4Message Instruction to read Parameter data:Figure 7.3The communication tab will have the path to the CTEU Ethernet module configured:Sample logic to execute instruction:Figure 7.4InformationenThe message is executed upon a rising edge trigger.7.1.2MSG Instruction for Write AccessTo write to sub-index 3, the user must create the following:∙“Source” Controller Tag of type SINT[4] for–SINT[0]=40h (index)–SINT[1]=0–SINT[2]=3h (sub-index)–SINT[3]=7h (example value to write to sub-index 3)∙“Destination” Controller Tag of type SINT[4] for destination holder ∙MSG instructionThe controller tags are created as follows:∙RFID_WR_source_CTEU = SINT[4]∙RFID_WR_destination = SINT[4]Figure 7.5The table data to fill the message instruction is as follows:Table 7.5:Message Instruction to write Parameter data:Figure 7.6In this case, the source element is the first byte of the array.Figure 7.7The communication tab will have the path to the CTEU Ethernet module configured:Sample logic to execute instruction:Figure 7.8InformationenThe message is executed upon a rising edge trigger.8AOI Support:Devices with a large number of parameters, or with multiple Boolean parameter functions in a single byte, can become difficult to manage. Therefore, a device specific AOI can improve the user experience when using the Mailbox Function.Attached there is an example AOI which demonstrates the use of the mailbox with a 3rd party RFID reader. There are two separate AOI’s, read parameters and write parameters.8.1Read Parameters of RFID ReaderImport the attached AOI into the Rockwell project.Figure 8.1Precede the Read MSG instruction with the AOI. In this case, use the same trigger as the MSG instruction. You should notice the tags for Source and Destination are the same tags used in the MSG instruction.Figure 8.2A new tag must be created for “Parameter Read Values”. This will be of user defined data-type:“UDT_FESTO_RFID_BISM_4x_Param_RDWR” which comes from the AOI installation.NoteBy reviewing tag names below, please note:•The tag name RFID_Param_CTEU data-type is user defined from the AOI•There is one function, to select the index to read. These are values 1 to 7, defined by the AOI, and described in the comment field•In this example, value 3 ( Act on Tag) is selected•The AOI automatically loaded the index + sub-index with the proper values to the tag RFID_RD_source_CTEU•When the trigger was enabled, the BIS 4xx returned a 7, meaning AUTO 8 bytes•The value is stored in the tag RFID_RD_destination_CTEU•It is also copied to the tag RFID_RD_Param_CTEU, so the user only needs to reference this tag nameFigure 8.38.2Write Parameters to RFID ReaderImport the attached AOI into the Rockwell project.Figure 8.4Precede the Write MSG instruction with the AOI. You should notice the tag for Source is the same tag used in the MSG instruction.Figure 8.5A new tag must be created for “Parameter_Write_Values”. This will be of user defined data-type:“UDT_FESTO_RFID_BISM_4x_Param_RDWR” which comes from the AOI installation.NoteBy reviewing tag names below, please note:•The tag name RFID_Param_CTEU data-type is user defined from the AOI•There is one function, to select the index to write. These are values 1 to 7, defined by the AOI, and described in the comment field•In this example, value 3 ( Act on Tag) is selected. Also, 7 is entered into instance Act_on_Tag•The AOI automatically loaded the index, sub-index, and payload data with the proper values to the tag RFID_WR_source_CTEU•When the trigger was enabled, the BIS 4xx received a 7, meaning AUTO modeFigure 8.6The value can then be read for verification.9CTEU – EDS AOP to Parameterize Festo I-Port devicesFesto IO-link devices have a unique connection scheme to connect with Festo masters. This is called I-Port, which uses IO-Link technology, but enables Festo devices to self configure.When using CPX, the CTEL 4 port module is used, and commissioning and setting parameters are well docu-mented in user manuals, and with FMT using the L5K Export.When using CTEU, parameters for I-Port devices can be best configured using EDS AOP. Refer to the following steps for Logix5000:1.Go to the Festo Support portal to find the EDS file CTEU-EP.edse the Tools menu in Studio 5000 to install the EDS file3.When selecting a new module for Ethernet, type Festo in the search bar for module type. Select CTEU-EPcommunication adaptere the change button to configure the IO connection of the CTEU, add the appropriate IP address, etc.Figure 9.15.Go to the configuration tab. Here you will need to follow the manual of the I-port device to be commissioned.Enter the appropriate data as needed.Figure 9.2InformationYou can use the “Group” dropdown-list to filter the displayed parameters.6.The “Parameters”-tab can be used in online mode to display the currently connected IO-Link-Devices.You can copy&paste the values from the “Parameters”-tab to the “Expected Vendor ID” and “Expected Device ID” parameters in the “Configuration”-tab.This is a easy method to set up the check for a specific IO-Link configuration.Figure 9.37.Select OK. This configuration is now complete.All configuration parameters will be sent to the CTEU-EP during the forward open message of EtherNet/IP, com-missioning the I-Port device connected.。

连接技术COM Express载板用户指南说明书

COM Express Carrier User ManualConnect Tech Inc. 42 Arrow Road Guelph, Ontario N1K 1S6 Tel: 519-836-1291Toll: 800-426-8979 (North America only) Fax: 519-836-4878Email: ********************* ***********************Web: CTIM-00312 Revision: 0.01, September 6, 2012Connect Tech COM Express Carrier Boards - User ManualRevision 0.012 Table of ContentsCustomer Support Overview ........................................................................................................................... 4 Contact Information ........................................................................................................................................ 4 Limited Lifetime Warranty ............................................................................................................................. 5 Copyright Notice ............................................................................................................................................. 5 Trademark Acknowledgment .......................................................................................................................... 5 Revision History ............................................................................................................................................. 5 Introduction .. (6)ESD Warning ............................................................................................................................................................ 6 Product Features and Specifications .......................................................................................................................... 7 System Block Diagram . (8)Hardware Description (9)CCG0xx Carrier Board Connector Locations ............................................................................................................ 9 Top Side (9)Bottom Side ..................................................................................................................................................... 10 Jumper and Connector Summary ..................................................................................................................... 11 COM Express Module Interface .............................................................................................................................. 12 Description ...................................................................................................................................................... 12 Connector ..................................................................................................................................................... 12 Module Installation .......................................................................................................................................... 12 Module Fan Power Connector ...................................................................................................................... 12 Power ...................................................................................................................................................................... 13 Description ...................................................................................................................................................... 13 Power Connector .......................................................................................................................................... 13 COM Express Carrier Current Sourcing Capabilities ................................................................................... 13 Current Consumption information................................................................................................................ 14 Power Supply Control .................................................................................................................................. 14 +5V Standby selection ................................................................................................................................. 15 PCI-104 and PC/104 Express Expansion ................................................................................................................ 16 Description ...................................................................................................................................................... 16 PCI-104 and PC/104 Express connectors ..................................................................................................... 16 PCIe/104 Connector ........................................................................................................................................ 16 Video ....................................................................................................................................................................... 17 Description ...................................................................................................................................................... 17 HDMI .............................................................................................................................................................. 17 HDMI Connector.......................................................................................................................................... 17 LVDS Video .................................................................................................................................................... 18 Description ................................................................................................................................................... 18 LVDS Video Header .................................................................................................................................... 18 LVDS Backlight ........................................................................................................................................... 19 LVDS Backlight connector .......................................................................................................................... 19 LVDS Backlight Power Jumper ................................................................................................................... 19 Power for LVDS Panel Circuits ................................................................................................................... 19 LVDS backlight enable polarity ................................................................................................................... 20 VGA ................................................................................................................................................................ 20 VGA Pinouts ................................................................................................................................................ 20 USB 2.0 ................................................................................................................................................................... 21 Description ...................................................................................................................................................... 21 Connector ..................................................................................................................................................... 21 Compact Flash Interface .......................................................................................................................................... 21 Compact Flash Connector ............................................................................................................................ 21 Audio Interface .. (22)Connect Tech COM Express Carrier Boards - User Manual Audio Connectors (22)Audio Selection Jumpers (22)Audio Jumpering Examples (23)SATA (23)Description (23)SATA HDD Connectors (23)SATA HDD Power Connectors (24)mSATA Socket (24)10/100/1000 Ethernet (24)Description (24)10/100/1000 Ethernet RJ Connector (25)Standard Serial (26)Description (26)Serial Connector RS232 (26)Serial Connector RS485 (27)RS485 Control Jumpers (27)RS485 Schematic Snippit (28)Status LEDs (28)J4 Miscellaneous Power Control Jumpers (29)Typical Hardware Installation for +12V power input (30)Software Installation & Configuration (30)Operating System Notes (30)Linux (30)Windows (30)Cables & Interconnect (31)Mechanical (32)Devkit standoffs (32)Devkit (DEV005) parts list (32)Devkit Installation Example (33)Hole Sizes (33)COM Express Carrier Board Dimensions (34)Revision 0.01 3Connect Tech COM Express Carrier Boards - User ManualRevision 0.014 Customer Support OverviewIf you experience difficulties after reading the manual and/or using the product, contact the Connect Tech reseller from which you purchased the product. In most cases the reseller can help you with product installation and difficulties.In the event that the reseller is unable to resolve your problem, our highly qualified support staff can assist you. Our support section is available 24 hours a day, 7 days a week on our website at:/sub/support/support.asp. See the contact information section below for more information on how to contact us directly. Our technical support is always free.Contact InformationMail/Courier Connect Tech Inc. Technical Support 42 Arrow Road Guelph, Ontario Canada N1K 1S6Email/Internet********************************************Telephone/FacsimileTechnical Support representatives are ready to answer your call Monday through Friday, from 8:30 a.m. to 5:00 p.m. Eastern Standard Time. Our numbers for calls are:Toll Free : 800-426-8979 (North America only)Telephone : 519-836-1291 (Live assistance available 8:30 a.m. to 5:00 p.m. EST,Monday to Friday)Facsimile : 519-836-4878 (on-line 24 hours)Connect Tech COM Express Carrier Boards - User Manual Limited Lifetime WarrantyConnect Tech Inc. provides a Lifetime Warranty for all Connect Tech Inc. products. Should this product, in Connect Tech Inc.'s opinion, fail to be in good working order during the warranty period, Connect Tech Inc.will, at its option, repair or replace this product at no charge, provided that the product has not beensubjected to abuse, misuse, accident, disaster or non-Connect Tech Inc. authorized modification or repair.You may obtain warranty service by delivering this product to an authorized Connect Tech Inc. businesspartner or to Connect Tech Inc. along with proof of purchase. Product returned to Connect Tech Inc. must be pre-authorized by Connect Tech Inc. with an RMA (Return Material Authorization) number marked on the outside of the package and sent prepaid, insured and packaged for safe shipment. Connect Tech Inc.will return this product by prepaid ground shipment service.The Connect Tech Inc. Lifetime Warranty is defined as the serviceable life of the product. This is defined as the period during which all components are available. Should the product prove to be irreparable, Connect Tech Inc. reserves the right to substitute an equivalent product if available or to retract Lifetime Warranty if no replacement is available.The above warranty is the only warranty authorized by Connect Tech Inc. Under no circumstances willConnect Tech Inc. be liable in any way for any damages, including any lost profits, lost savings or otherincidental or consequential damages arising out of the use of, or inability to use, such product. Copyright NoticeThe information contained in this document is subject to change without notice. Connect Tech Inc. shallnot be liable for errors contained herein or for incidental consequential damages in connection with thefurnishing, performance, or use of this material. This document contains proprietary information that isprotected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Connect Tech, Inc.Copyright 2012 by Connect Tech, Inc.Trademark AcknowledgmentConnect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred to in this document as the property of their respective owners.Not listing all possible trademarks or copyright acknowledgments does not constitute a lack ofacknowledgment to the rightful owners of the trademarks and copyrights mentioned in this document.Revision 0.01 5Connect Tech COM Express Carrier Boards - User ManualRevision 0.016 IntroductionConnect Tech’s COM Express Carrier Boards are small feature rich, super flexible carrier boards that integrate with any industry standard type II COM Express module. These bus-independent carrier boards offer easy connection to SATA HDD, USB, Ethernet, HDMI Video, LVDS Video, VGA video, RS-232 and RS485 serial.Connect Tech’s COM Express carrier boards are ideal for compact and high performance computingapplications in mobile entertainment, kiosks, digital signage, automation, ROVs and gaming applications.ESD WarningElectronic components and circuits are sensitive toElectroStatic Discharge (ESD). When handling any circuitboard assemblies including Connect Tech COM Express carrier assemblies, it is recommended that ESD safety precautions be observed. ESD safe best practices include, but are not limited to:∙ Leaving circuit boards in their antistatic packaginguntil they are ready to be installed.∙ Using a grounded wrist strap when handling circuitboards, at a minimum you should touch a grounded metal object to dissipate any static charge that may be present on you. ∙ Only handling circuit boards in ESD safe areas, whichmay include ESD floor and table mats, wrist strap stations and ESD safe lab coats.∙ Avoiding handling circuit boards in carpeted areas. ∙ Try to handle the board by the edges, avoiding contactwith components.Connect Tech COM Express Carrier Boards - User Manual Product Features and Specifications* Depends on the peripherals attached, the modules used and the amount of available airflow.Revision 0.01 7Connect Tech COM Express Carrier Boards - User ManualRevision 0.018System Block DiagramVGAIDE Connect Tech COM Express CarrierConnect Tech COM Express Carrier Boards - User ManualRevision 0.01 9Hardware DescriptionCCG0xx Carrier Board Connector Locations Top SideP16 - Audio INP3A - USB ports 1&2P3B - USB ports3&4P11 HDMIP12 - CompactFlash Type IJ8/J9 - AudioP14 - 10/100/1000EthernetP8 - Power SignalP13 - Fan Power J4 - Power Control P6 - ATX Power (option)P9, P10 - SATA HDD PowerP2A, P2B -SATA HDD +12VDC InputJ10 - Audio Sense selection P23 - PC/104 ExpressP17 - mSATAP26 - VGAP24 - RS232Ports 1&2P4 - LVDS VideoJ11 - RS485 ModeJ2 - Panel Backlight SelectionJ1 - Panel VDD SelectionConnect Tech COM Express Carrier Boards - User ManualRevision 0.0110Bottom SideCOM Express ConnectorJumper and Connector SummaryConnector Summary Jumper SummaryCOM Express Module InterfaceDescriptionThe processor and chipset are implemented on the COM Express CPU module, which connects to the COM Express carrier via a Tyco fine pitch stacking connector.Module InstallationEnsure that the Male/Female Hex Standoffs are securely installed and tight. There is a specific technique to installing COM Express modules. It is highly recommended to follow your vendor’s documentation.There are also good instructional videos on YouTube on this subject. You can search for these vid eos with the following string, “installation of a com express module” – enter this into the YouTube search without the quotes!A jumper must be installed on J5 for the fan to operate. The fan speed is fixed by the voltage selected via the jumper.PowerDescriptionThe COM Express carriers are designed to be powered from a single +12V power supply. The carrier board features a 3.5mm screw terminal style connector.The COM Express carrier generates all of the necessary voltages on board.A Panasonic BR1225A/FA Lithium battery provides the VBAT for the COM Express module.COM Express Carrier Current Sourcing CapabilitiesThe following are the maximum current capabilities of the CCG0xx unit. These values cannot be exceeded.Current Consumption informationThe majority of the current consumption is from the COM Express module, the PCI-104 and PC104 Express cards. Other sources of current consumption are USB, SATA HDD drives, etc.The following table can be used to help estimate the total current consumption of you COM Express carrier solution. When building up your COM Express solution you should use your vendor provided datasheets to help create an more precise power estimate.These signals can be used with +12V power supplies that provide Power Good and can utilize a Power Good signal. Power Good is an open drain signal and is pulled up to +5V on the COM Express carrier.PCI-104 and PC/104 Express ExpansionDescriptionDepending on the model, CCG0xx Carrier Boards have PCI-104 expansion or PC/104 Express expansion or both.A PCI-104 interface is provided on the COM Express carrier. The stack up can consist of up to four PCI-104 or PC/104 Express cards in any combination.∙V-I/O on the PCI-104 is set to +3.3V.∙All power rails are sourced by the COM Express Carrier, except for -12V.PCIe/104 ConnectorThe PCIe/104 connector features PCIe/104 Type 1 connections as follows:Descriptionx1 PCIe lanesUSB 2.0 Ports (USB Ports 5 and 6 from module)Misc signals including #Reset and #WakeBank 1 and Bank 2 signals are not connected and are left open.VideoDescriptionThe COM Express carrier features three video outputs, VGA, HDMI and LVDS. The availability of the graphics interfaces depends on the COM Express module selected.The configuration of either interface as the primary or secondary or tertiary display depends on the COM Express module’s BIOS capabilities and settings. Refer to the COM Express module’s documentation for more details.HDMIAn HDMI connector is provided on the COM Express carrier.LVDS VideoDescriptionThe COM Express carrier provides dual 18 or 24 bit LVDS display channels via P4, which are connected directly from the COM Express module. LVDS panel supply power is selected with jumper J1 and backlight power is selected with jumper J2. Both are current limited to 500 mA with Raychem resettable ploy fuses.LVDS BacklightPins 1-2 marked with white lineVGAStandard 15 Pin VGA is available at P26. This header can be adapted to a standard DB15 female the CBG070 cable.USB 2.0DescriptionThe COM Express carrier implements four USB 2.0 connections via two USB connectors. Over current protection and power supply filtering is provided.Only the USB host features of the COM Express specification have been implemented, USB client features are not supported.Compact Flash InterfaceA Type I Compact Flash socket is available. The Compact Flash utilizes the COM Express Module IDE interface. Note that this Compact Flash interface is NOT a hot swappable interface. The Compact Flash is only detected at bootup by the BIOS. The unit should be powered off before installing or removing the Compact Flash card.Audio InterfaceThe COM Expres Carrier features two 3.5mm stereo audio jacks that function as follows:Audio ConnectorsInput Output1.The Microphone input is equipped with a Phantom Power circuit.2.The Headphone output is amplified by the CS4207 Codec.Audio Selection JumpersJ7J6J9J8J10* J10 Provides the CS4207 Audio Codec with the Sense input:The Sense input is used by Audio Codecs to detect the presence of an audio plug being installed into an audio jack, via a switch inside the jack. The Audio jacks on the COM Express carrier do NOT have this switch, so we have provided these jumpers to mimic that function.Not all operating systems require this sense input to be satisfied, for example audio under Ubuntu 10.04 LTS will function fine without the Jumpers, however audio under Windows XP will not.SATADescriptionThe COM Express carrier provides two SATA HDD connections and one mSATA socket. Note the logical order of the SATA ports in the table below.Power connector shown inserted. Pine 1is on the right.The SATA power connectors are fused independently from the main +12V fuse that provides +12V power to the board, i.e. the SATA power connectors are not double fused.10/100/1000 EthernetDescriptionThe CCG0xx COM Express carriers features a standard RJ Jack and magnetics for Ethernet communications. The Ethernet MAC and PHY are located on the COM Express module.Standard SerialDescriptionThe CCG0xx series of COM Express adapters features four serials ports. Port1 and Port2 are standard RS232 and Port3 and Port4 are RS485. The SMSC SCH3114 Super I/O chip is used to facilitate the serial I/O. This chip requires both an LPC bus connection from the module and BIOS support to operate. Ask your module vendor or examine your module documentation to determine of BIOS support is available for the SCH3114.The pinouts are as followssRS485 Control JumpersThe RS485 Control Jumpers are used for implementing the following RS485 modes of operations: ∙½ Duplex Multidrop∙Full Duplex MultidropThe UART RTS signal is used along with the J11 jumpers to facilitate these modes.RS485 Schematic SnippitThe following RS485 schematic snippit is presented to assist in the understanding of the CCG0xx RS485 circuit.Status LEDsLAN Activity100 Mb Connection 1000 Mb Connection +12VSATA Activity Compact Flash Activity +5VJ4 Miscellaneous Power Control JumpersNotes:∙Position A: If ATX power supplies are used, this signal can be used to override the PS_ON signal from the Carrier board and simply force the PS_ON signal to 0V. The ATX supply should switch on as soon as it is powered.∙Position B: Used when operating with a +12V power input. This jumper will route 5V to the POWER_OK pin on the COM Express module.∙Position C: SYSTEM RESET input to the COM Express Module∙Position D: POWER_BUTTON input to the COM Express Module∙Position E: An External Battery could be wired here if the one on the carrier not needed.Typical Hardware Installation for +12V power input1.Ensure all external system power supplies are off.2.Install the COM Express module into P1. Be sure to follow the manufacturer’s direction for properheatsink/heatspreader installation and any other cooling instructions from the manufacturer.3.Verify all jumper settings from the relevant sections, paying special attention the power selection jumpers.Some typical settings are outlined below.4.Install the necessary cables for the application. At a minimum, this would include:a)+12V Power cable to P7b)Video display cable VGA, and/or HDMI.c)Keyboard and mouse via USBd)SATA Power and Signal to SATA HDDFor the relevant cables, see the Cables & Interconnect section of this manual5.Connect the power cable to power supply6.Switch on the power supply. DO NOT power up your COM Express system by plugging in live power. Software Installation & ConfigurationIn general, always refer to the COM Express module’s manual for proper installation of software drivers and configuration software; as well as for appropriate BIOS settings.The following sections provides some specific notes and hints for successful module integrationOperating System NotesLinuxNone at this time.WindowsThe Windows XP Driver for the CS4207 Audio codec may experience issues. Please contact Connect Tech Customer support for more information. The issues involve:∙Microphone input∙Line inputConnect Tech COM Express Carrier Boards - User Manual Audio output should be OK.Cables & InterconnectThe following table summarizes the COM Express carrier’s headers and lists the matching cables included with the optional cable kit CKG007.Cabledrawingsareavailableuponrequest.Sendanemailrequestto:***********************.Revision 0.01 31Connect Tech COM Express Carrier Boards - User ManualRevision 0.0132 MechanicalDevkit standoffsA Devkit, part number DEV005 can be purchased to facilitate bench top development. The Devkit includes screws, standoffs and spacers. See picture below.Connect Tech COM Express Carrier Boards - User ManualDevkit Installation ExampleThree corners of the PCB:∙Qty (6) 20mm Male/Female Hex Stand offs. Stack in pairs to achieve height as needed.∙Qty (3) 5mm M2.5 ScrewsCorner of PCB as seen in picture below:∙Qty (1) 20mm Male/Female Hex Stand offs∙Qty (1) 25mm M2.5 Screw∙Qty (1) 8mm M3 spacer25mm Screw8mm Spacer20mm Male/Female standoffHole SizesRevision 0.01 33COM Express Carrier Board Dimensions。

BNS 260 生活用电器安全设备手册说明书

DataOrdering dataProduct type descriptionBNS 260-11/01ZG-R Article number (order number)101184376EAN (European Article Number)4030661321745eCl@ss number, Version 9.027-27-24-02CertificationsCertificates DGUVTÜVcULus EACGeneral dataProduct nameBNS 260StandardsIEC 60947-5-3 BG-GS-ET-14 Installation conditions(mechanical)quasi-flush Enclosure materialGlass-fibre, reinforced thermoplastic Gross weight 60 g General data - FeaturesCoding Yes BNS260-11/01ZG-RLong lifeSmall bodyPre-wired cableno mechanical wear26 mm x 36 mm x 13 mmInsensitive to soilingThermoplastic enclosure Concealed mounting possible Insensitive to transverse misalignmentIntegral System Diagnostics,YesstatusNumber of openers2Number of shutters1Number of safety contacts2Number of cable wires6Safety appraisalStandards ISO 13849-1Mission Time20 Year(s)Safety appraisal - Safety outputsB10d- Value Normally-closed25,000,000 Operationscontact/Normally open contact(NC/NO)Mechanical dataActuating element MagnetDoor hinge RightEnsured switch distance "ON" S5 mmaoEnsured switch distance "OFF" S15 mmarAxial misalignment, a horizontal and vertical misalignment of the safetysensor and the actuator are tolerated. The possible misalignment dependson the distance of the active surfaces of the sensor and the actuator. Thesensor remains active within the tolerance range.Direction of motion Head-on to the active surfaceMechanical data - Connection techniqueTerminal Connector CableLength of cable 1 mWire cross-section0.25 mm2Material of the Cable mantle PVCMechanical data - DimensionsHeight of sensor36 mmLength of sensor13 mmWidth of sensor26 mmAmbient conditionsProtection class IP67Ambient temperature, minimum-25 °CAmbient temperature, maximum+70 °CStorage and transporttemperature, minimum-25 °CStorage and transporttemperature, maximum+70 °CResistance to vibrations to EN60068-2-610 … 55 Hz, amplitude 1 mmRestistance to shock30 g / 11 msElectrical dataVoltage type DC (direct current)Switching voltage, maximum24 VDCSwitching current, maximum0.01 ASwitching capacity, maximum0.24 WSwitching frequency, maximum 5 HzStatus indicationNote (Integral SystemDiagnostics, status )The LED is illuminated when the guard is closed. Scope of deliveryIncluded in delivery Actuators must be ordered separately. AccessoryRecommendation (actuator)BPS 260SRB-E-301STSRB-E-201LCNotesNote (General)Contact symbols shown for the closed condition of the guard device. The contact configuration for versions with or without LED is identical.Circuit exampleNote (Wiring diagram)Contact S21-S22; S13-S14 must be integrated in the safety circuit. Ordering codeProduct type description:BNS 260-(1)(2)Z(3)-(4)-(5)(1)11 1 NO contacts/1 NC contact02 2 NC contact(2)without with diagnostic output/01 1 NC contact(3)without without LED switching conditions displayG with LED switching conditions display(4)without Pre-wired cableST with connector(5)L Door hinge on left-hand sideR Door hinge on right-hand sidePicturesProduct picture (catalogue individual photo)ID: kbns2f23| 314,7 kB | .jpg | 352.778 x 246.239 mm - 1000 x 698Pixel - 72 dpi| 25,0 kB | .png | 74.083 x 51.858 mm - 210 x 147Pixel - 72 dpi| 39,7 kB | .jpg | 27.093 x 18.881 mm - 320 x 223 Pixel- 300 dpiDimensional drawing basic componentID: kbns2g05| 131,1 kB | .jpg | 352.425 x 417.336 mm - 999 x 1183Pixel - 72 dpi| 4,5 kB | .png | 73.731 x 87.489 mm - 209 x 248 Pixel- 72 dpi| 34,5 kB | .jpg | 112.536 x 133.35 mm - 319 x 378Pixel - 72 dpi| 37,3 kB | .cdr |DiagramID: kbns2k04| 25,1 kB | .jpg | 112.889 x 27.164 mm - 320 x 77 Pixel- 72 dpi| 19,5 kB | .cdr |Characteristic curveID: kbns2d03| 36,8 kB | .cdr || 40,4 kB | .jpg | 112.889 x 74.789 mm - 320 x 212Pixel - 72 dpi| 18,5 kB | .png | 74.083 x 49.036 mm - 210 x 139Pixel - 72 dpiCharacteristic curveID: kbns2d02| 19,2 kB | .png | 74.083 x 49.389 mm - 210 x 140Pixel - 72 dpi| 40,8 kB | .jpg | 112.889 x 75.142 mm - 320 x 213Pixel - 72 dpi| 36,3 kB | .cdr |Clipart| 20,1 kB | .cdr || 1,7 kB | .png | 74.083 x 52.564 mm - 210 x 149 Pixel- 72 dpiK.A. Schmersal GmbH & Co. KG, Möddinghofe 3, D-42279 WuppertalThe details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.Generated on 08.07.2020 19:14:08。

Eaton Moeller 系列 CI 保险组合封闭型 263526 产品说明书

Eaton 263526Eaton Moeller® series CI Insulated enclosure, IP55_x, rotary handle black grey, for PKZ0 CI-PKZ0-GVMGeneral specificationsEaton Moeller® series CI Insulated enclosure263526126 mm158 mm 80 mm 0.2 kg CECI-PKZ0-GVMProduct NameCatalog Number Product Length/Depth Product Height Product Width Product Weight Compliances Model Code0 AAccessoriesIs the panel builder's responsibility. The specifications for the switchgear must be observed.0 W10 WMeets the product standard's requirements.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Black-gray rotary knobPE(N) terminalMeets the product standard's requirements.Meets the product standard's requirements.Is the panel builder's responsibility.Is the panel builder's responsibility.IP55NEMA Other DA-CE-ETN.CI-PKZ0-GVMIL03407019ZDA-CD-ci_pkz0_gvmDA-CS-ci_pkz0_gvmeaton-manual-motor-starters-enclosure-ci-insulated-enclosure-dimensions.epseaton-manual-motor-starters-mounting-ci-insulated-enclosure-dimensions-002.epseaton-manual-motor-starters-enclosure-ci-k-accessory-dimensions-002.epseaton-manual-motor-starters-enclosure-ci-insulated-enclosure-3d-drawing-003.epsRated operational current for specified heat dissipation (In) Product category10.11 Short-circuit ratingEquipment heat dissipation, current-dependent PvidHeat dissipation capacity Pdiss10.4 Clearances and creepage distances10.12 Electromagnetic compatibility10.2.5 Lifting10.2.3.1 Verification of thermal stability of enclosuresFitted with:10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.8 Connections for external conductors10.9.2 Power-frequency electric strengthDegree of protection eCAD model Installeringsinstruksjoner mCAD model TegningerAmbient operating temperature - max70 °C10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Static heat dissipation, non-current-dependent Pvs0 W10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Enclosure materialPlasticKnockouts2 x M25 (cable entry knockout with thread at the top)Hard mirror with cable entry knockouts (can be cut out)2 x M25 (cable entry knockout with thread at the bottom)2 x M20 (cable entry knockouts at the rear)Ambient operating temperature - min-25 °C10.2.2 Corrosion resistanceMeets the product standard's requirements.10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.10.2.4 Resistance to ultra-violet (UV) radiationPlease enquire10.2.7 InscriptionsMeets the product standard's requirements.10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Used with+ U or A, +L-PKZ0 (2 units), PKZM0-… and VHIModelSurface mounting10.13 Mechanical functionThe device meets the requirements, provided the information inEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Med enerett.Eaton is a registered trademark.All other trademarks are property of their respectiveowners./socialmediathe instruction leaflet (IL) is observed.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Does not apply, since the entire switchgear needs to be evaluated.0 W10.2.6 Mechanical impact10.9.4 Testing of enclosures made of insulating material 10.3 Degree of protection of assembliesHeat dissipation per pole, current-dependent Pvid。

1.5代自动螺丝机BOM表明细

件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件件
6 1 1 1 1 1 1 1 2 6 3 2 2 2 4 3 3 4 4 2 2 2 1 1 2 2 4 3 2 3 1 1 1 1 1 1 2 1 2 1 3 2 1 8 4 4 4
AIRTAC
4V230C-08-B-I
件
2
SHINI(信易）
D11xM12x45L
件
4
SHINI(信易）
YS2-30
件
4
DINGLI
QE-01
件
3
PISCO
RVUM4-4
件
3
捷豹
EC51-33L
件
1
20L
件
1
OMRON
EE-SPY412
件
7
坦克链
件
3
MISUMI
GPA24GT5120-A-N8
件
6
MISUMI
D40
件
2
AIRTAC
F-M10125F
件
2
AIRTAC
F-M12125F
件
1
缓冲器 64 缓冲器套 65 螺母 66 螺母 67 螺丝 68 螺丝 69 螺丝 70 螺丝 71 螺丝 72 螺丝 73 螺丝 74 螺丝 75
AIRTAC
ACA2525
件
4
AIRTAC
SCTC25(CEC)
件
4
M22X1.5p
GPA24GT5120-A-N14
件
6
MISUMI

三极管c2635参数 -回复

三极管c2635参数-回复三极管C2635是一种PNP型晶体管，常用于电子设备中作为放大器或开关。

本文将详细介绍三极管C2635的参数，并解释其作用和应用。

首先，我们来了解三极管C2635的基本参数。

C2635的参数如下：1. 放大倍数（hFE）：三极管的放大倍数是指输入和输出电流之比。

C2635的放大倍数通常在100到400之间。

2. 最大集电极-基极电压（VCBO）：VCBO是三极管集电极和基极之间的最大电压，超过这个电压会损坏三极管。

C2635的VCBO为60V。

3. 最大集电极-发射极电压（VCEO）：VCEO是三极管集电极和发射极之间的最大电压，超过这个电压会损坏三极管。

C2635的VCEO为50V。

4. 最大基极-发射极电压（VEBO）：VEBO是三极管基极和发射极之间的最大电压，超过这个电压会损坏三极管。

C2635的VEBO为5V。

5. 最大集电极电流（IC）：IC是通过三极管集电极的最大电流。

C2635的IC为1A。

了解了C2635的基本参数后，我们可以深入探讨其具体的作用和应用。

首先，作为PNP型三极管，C2635可以用于放大电路。

通过控制基极电流，可以实现对集电极电流的放大。

C2635的放大倍数在100到400之间，能够满足大多数放大电路的需求。

其次，C2635还可以用作开关。

在开关电路中，C2635可以用来控制电流的开关状态。

当基极电流为零时，三极管处于截止状态，集电极-发射极之间没有导通，电路断开；当基极电流适当增大，三极管进入饱和状态，电流可以流过集电极-发射极之间，电路接通。

除了放大器和开关，C2635还可以用于稳压电路和振荡电路。

在稳压电路中，C2635可以通过调节基极电流来控制输出电压的稳定性。

在振荡电路中，C2635可以作为反馈元件提供正反馈信号，维持电路的振荡状态。

此外，C2635还具有温度特性。

三极管在工作过程中会产生热量，如果温度过高，会造成器件损坏。

C2635的温度特性表明它能够在较高温度下正常工作，温度范围通常为-55至+150。

申菱恒温恒湿机样本

申菱恒温恒湿机样本目录一、产品简介及特点 (2)二、恒温恒湿空调机汇总表................................. ..3三、名义工况............................................. …・3四、运行范围................................... .... .... •…・3五、产品型号表示方法 (4)六、送回风方式............................... . (4)七、性能参数表…………………………………………………… ..…… ..5八、外形及空间安装尺寸……………………………………..………… .8九、安装注意事项 (11)十、订货参考事项 (11)十一、附录 (12)申菱牌恒温恒湿空调机是申菱公司积累多年实践经验设计而成的机组。

机组采用智能化的控制模式，实现对机组制冷、除湿、加热、加湿等功能，从而达到对室内环境温、湿度的精确控制。

广泛适用于电子工业、仪器仪表、印刷厂、通讯设备、供配电站等对空气温、湿度精度要求较高的场合。

2产品特点本系列设有3HP〜100HP共20个规格。

有风冷、水冷两种冷却方式，满足客户不同使用环境的需求。

辅助加热方式（电加热，蒸汽加热、热水加热）及送回风形式多种多样，便于匹配组合。

有新风引入功能，能够有效改善空气品质。

人性化的微电脑控制系统，操作简单方便。

高精度的PLC 控制技术，多级能量调节，室内温湿度波动小，温度精度达土0.8° C，湿度精度土5%。

机组结构紧凑，外形美观，便于安装、运输及维压缩机全部采用高性能涡旋式压缩机，送风机选用低噪音高效率离心式风机，制冷系统配件皆来自国际知名品牌，性能稳定。

单系统机组设置除湿电磁阀，使机组在低负荷运行时，能保持较佳的除湿效果，尤其适合潮湿多雨的雾雨季节，精确控制，高效节能，节省再加热功耗；多系统机组具有多级能量调节。

青岛海信日立空调系统有限公司(黑龙江办事处)-2014-08-27

台台台台台台台台台台台台台台台台台台台台台台台台台台台台台台台
3320 3410 3570 3650 3790 3920 4130 4340 4580 4730 3950 4110 4350 4490 4620 4830 5040 5280 5430 5860 5930 6180 6350 6660 6900 7260 4350 4510 4750 4890 5020
日立中央空调设备报价单
项目编号：设备系列机种型号 RAS-224FSN6Q RAS-280FSN6Q RAS-335FSN6Q RAS-400FSN6Q RAS-450FSN6Q RAS-500FSN6Q RAS-504FSN6Q RAS-560FSN6Q RAS-630FSN6Q RAS-690FSN6Q RAS-730FSN6Q RAS-800FSN6Q 室外机 RAS-850FSN6Q RAS-900FSN6Q RAS-960FSN6Q RAS-1010FSN6Q RAS-1070FSN6Q RAS-1130FSN6Q RAS-1180FSN6Q RAS-1240FSN6Q RAS-1300FSN6Q RAS-1350FSN6Q RAS-1400FSN6Q RAS-1450FSN6Q RAS-1500FSN6Q RPIZ-22FSN6Q 单位台台台台台台台台台台台台台台台台台台台台台台台台台台单价(元) 28700 31500 34200 39600 44200 49800 60200 63000 68300 71100 73800 79200 83800 88400 104400 107200 108000 112600 118000 122600 128000 132600 138200 143800 149400 3240

劳易测光电传感器订货

对射传感器ILSR3B/6.8-S8 50108509 50108517 对射传感器ILSR3B/6.8,200-S8 50108512 50108518 对射传感器LSR3B/66-S8 50108508 50108514 对射传感器LSR3B/66.8-S8 50108509 50108514 对射传感器LSR3B/66.1-S8 50108508 50108515 对射传感器LSR3B/66.8 50108510 50108516 对射传感器LSR3B/66.8,5000 50108511 50108519 镜反射传感器RKR3B/44D.01-S8 50106511镜反射传感器RKR3B/22D.01-S8 50106512镜反射传感器RKR3B/6.42-S8 50104703镜反射传感器RKR3B/6D.42 50107914镜反射传感器RKR3B/6.42 50104702镜反射传感器RKR3B/6.42,200-S8 50104704镜反射传感器RKR3B/6.42,200-S12 50104704镜反射传感器RK3B/66.1 50106852镜反射传感器PRK3B/66-S8 50104694镜反射传感器PRK3B/66 50104693镜反射传感器PRK3B/66,200-S8 50104695镜反射传感器PRK3B/66,200-S12 50104696镜反射传感器PRK3B/66.1-S8 50106078镜反射传感器PRK3B/6.22-S8 50104700镜反射传感器PRK3B/6.22 50104699镜反射传感器PRK3B/6.22,200-S8 50104701镜反射传感器PRK3B/6.22,200-S12 50105762镜反射传感器PRK3B/6D.46 50108026镜反射传感器PRKL3B/6D,22-S8 50106475镜反射传感器PRKL3B/6.22-S8 50104706镜反射传感器PRKL3B/6.22 50104705镜反射传感器PRKL3B/6.22,200-S8 50104707镜反射传感器PRKL3B/6.22,200-S12 50105764漫反射传感器RTR3B/66-S8 50108505漫反射传感器RTR3B/66 50108506漫反射传感器RTFR3B/6-S8.3 50108498漫反射传感器RTFR3B/6D-S8.3 50108499漫反射传感器RTFR3B/66-S8 50108495漫反射传感器RTFR3B/66 50108496漫反射传感器RTFR3B/66,200-S8 50108504漫反射传感器HRTR3B/4,200-S8.3 50107232漫反射传感器HRTR3B/44-S8 50107233漫反射传感器HRTR3B/44 50107235漫反射传感器HRTR3B/44,200-S12 50107236漫反射传感器HRTR3B/22-S8 50107239漫反射传感器HRTR3B/22 50107238漫反射传感器HRTR3B/66-S8 50107229漫反射传感器HRTR3B/66 50107228漫反射传感器HRTR3B/66,200-S8 50107230漫反射传感器HRTR3B/66,200-S12 50107298漫反射传感器HRTR3B/66-S-S8 50107243漫反射传感器HRTR3B/66-S 50107242漫反射传感器HRTR3B/66-S,200-S8 50107244漫反射传感器HRTR3B/66-S,200-S12 50107245漫反射传感器HRTR3B/44-XL-S8 50107250漫反射传感器HRTR3B/44-XL,200-S12 50107251漫反射传感器HRTR3B/66-XL-S8 50107247漫反射传感器HRTR3B/66-XL 50107246漫反射传感器HRTR3B/66-XL,200-S8 50107248漫反射传感器HRTR3B/66-XL,200-S12 501072498系列对射传感器LSR8/44-S12 50036354 50036356 对射传感器LSR8/44 50036355 50036357 对射传感器LSR8/66-S12 50036354 50036569 对射传感器LSR8/66 50036355 50036570 对射激光传感器LSRL8/24.91-S12 50036358 50036359 对射激光传感器LSRL8/24.91 50037083 50037084 镜反射传感器PRK8/44-S12 50036360镜反射型传感器PRK8/44 50036361镜反射型传感器PRK8/66-S12 50036362镜反射型传感器PRK8/66 50036363镜反射型传感器PRK8/66.11-S12 50037133镜反射型传感器PRK8/66.41-S12 50037134镜反射型传感器PRK8/66.42-S12 50037135镜反激光传感器PRKL8/24.91-S12 50036364镜反激光传感器PRKL8/24.91 50036365漫反射传感器RTR8/44-800-S12 50036366漫反射传感器RTR8/44-800 50036367漫反射传感器RTR8/66-800-S12 50036368漫反射传感器RTR8/66-800 50036369漫反射传感器VRTR8/44-250-S12 50036372漫反射传感器VRTR8/66-250-S12 50036374漫反射传感器VRTR8/66-250 50036375漫反射传感器HRTR8/44-350-S12 50036350漫反射传感器HRTR8 /44-350 50036351漫反射传感器HRTR8/66-350-S12 50036352漫反射传感器HRTR8/66-350 50036353漫反射传感器HRT8/66.6-350-S12 50039650漫反射传感器IHRT8/4-200-S12 50103361漫反射传感器IHRT8/4-100-S12 50103360漫反光传感器HRTL8/24-350-S12 50036370漫反激光传感器HRTL8/24-350 50036371漫反激光传感器HRTL8/66-350-S12 50002705漫反激光传感器HRTL8/66-350,5000 50103709漫反激光传感器HRTL8/24-150-S12 50038482漫反激光传感器HRTL8/24-150 ********漫反激光传感器HRTL8/66-150-S12 50102704以上没录18系列镜反射传感器RKR18/4L 50102731镜反射传感器RKR18/4,6000 50102730镜反射传感器RKR18/4 DL8.45.1 50041446镜反射传感器RK18/4 DL.45 50081364镜反射传感器PRK18/4L 50081254镜反射传感器PRK18/4,6000 50033244镜反射传感器PRK18/4 DL.41 50033552镜反射传感器PRK18/24 DL.42 50033554镜反射传感器PRK18/24 DL.46 50032798镜反射传感器PRK18/4L.4 50104415镜反射传感器PRK18/2 DL.4 50080153镜反射传感器PRK18/2 DL.4 50081153镜反射传感器IPRK18/VL.03 5010697425系列对射型传感器ILSR25/4.8-S12 50039528 50039531 对射型传感器LSR25/66.8-S8 50039526 50039527 对射型传感器LSR25/66.8-S12 50039528 50039529 对射型传感器LSR25/66.8 50039524 50039525 镜反射传感器PRK25B/4.8-S12 50104227镜反射传感器IPRK25B/4-S12 50104228镜反射传感器IPRK25B/4,200-S12 50104229镜反射传感器PRK25B/66-S8 50104224镜反射传感器PRK25B/66-S12 50104223镜反射传感器PRK25B/66.1-S12 50104230镜反射传感器PRK25B/66 50104225镜反射传感器PRK25B/66,100-S8 50105739镜反射传感器PRK25B/66,200-S12 50104226镜反射传感器PRK25B/4.38-S12 50104247 镜反射传感器IPRK25B/4.3-S12 50104246 镜反射传感器IPRK25B/4.3,200-S12 50108111 镜反射传感器PRK25B/4D.3-S8 50104241 镜反射传感器PRK25B/4D.3-S12 50104242 镜反射传感器PRK25B/4D.3,200-S12 50108549 镜反射传感器PRK25B/66.3-S8 50104237 镜反射传感器PRK25B/66.31-S8 50104244 镜反射传感器PRK25B/66.3-S12 50104236 镜反射传感器PRK25B/66.31-S12 50104243 镜反射传感器PRK25B/66.3 50104238 镜反射传感器PRK25B/66.31 50104245 镜反射传感器PRK25B/66.3,200-S8 50104239 镜反射传感器PRK25B/66.3,200-S12 50104240 镜反射传感器PRK25B/66.30,200-S12 50106203 镜反射传感器PRK25/4D-S12 50105152 镜反射传感器PRK25/66.300-S12 50105161 镜反射传感器PRK25/66.2-S8 50041394 镜反射传感器PRK25/66.2-S12 50041395 镜反射传感器PRK25/66.2,150-S12 50041396 镜反射传感器PRK25/66.2 50104202 镜反射传感器PRK25/66.41-S8 50101978 镜反射传感器PRK25/66.41-S12 50101457 镜反射传感器PRK25/66.41,150-S12 50108049 反射激光传感器PRK25B/4D.1-S12 50104232 反射激光传感器PRKL25B/6.18-S12 50104232 反射激光传感器PRKL25B/66.1-S8 50104233 反射激光传感器PRKL25B/66.1-S12 50104231 反射激光传感器PRKL25B/66.1 50104235 漫反射传感器RTR25/66-700-S8 50039544 漫反射传感器RTR25/66-700-S12 50039545 漫反射传感器RTR25/66-700 50039543 漫反射传感器RTR25B/66-S12 50108476 漫反射传感器RTR25/66-300-S12 5040354 漫反射传感器RTR25/66-300 50040906 漫反射传感器RTR25/66.1-200,150-S12 50102839 漫反射传感器RTFR25B/66-S8 50108474 漫反射传感器RTFR25B/66-S12 50108472 漫反射传感器RTFR25B/66 50108475 漫反射传感器RTFR25B/66,200-S12 50108473 漫反射传感器HRTR25/66-300-S8 50039547 漫反射传感器HRTR25/66-300-S12 50039548 漫反射传感器HRTR25/66-300 50039546 漫反射传感器HRTR25/66-300,100-S8 50105803漫反射传感器HRTR25/66-300,300-S12 50105210漫反射传感器HRTR25/6.2-200-S8 50039550漫反射传感器HRTR25/6.2-200-S12 50039551漫反射传感器HRTR25/6.2-200 50039549漫反射传感器HRT25/4.11-300-S12 50106048漫反射传感器HRT25/6.03-300-S12 50108240漫反射传感器HRT25/66.03-300-S8 50108239漫反射传感器HRT25/66-300-S12 50040466漫反射传感器HRT25/66-300,5000 50107368漫反射传感器HRT25/66-300,150-S12 5004046546系列对射型传感器LS46/44-S12 50081246 50081248 对射型传感器LS46/44,300-S12 50081320 50081321 镜反射传感器IPRK46B/4-S12 50105986镜反射传感器PRK46B/44-S12 50105986镜反射传感器PRK46B/66-S12 50103070镜反射传感器PRK46B/66.01-S12 50103082镜反射传感器PRK46B/66 50107068镜反射传感器PRK46B/66,200-S12 50103071镜反射传感器PRK46B/7D-S12 50103080镜反射传感器PRK46B/4.82-S12 50103084镜反射传感器IPRK46B/4.2-S12 50103076镜反射传感器PRK46B/4D.2-S12 50105987镜反射传感器PRK46B/44.2-S12 50105106镜反射传感器PRK46B/6.2-S12 50105156镜反射传感器PRK46B/66.2-S12 50103072镜反射传感器PRK46B/66.2,200-S12 50103073镜反射传感器RTR46B/66-S12 50108522镜反射传感器RTR46B/66 50108524镜反射传感器RTR46B/66,200-S12 50108523镜反射传感器HRTR46B/4-S12 50106557镜反射传感器HRTR46B/4D-S12 50106558镜反射传感器HRTR46B/66-S12 50106555镜反射传感器HRTR46B/66,200-S12 50106556镜反射传感器HRTR46B/66-S-S12 50106559镜反射传感器HRT46B/4-S12 50106549镜反射传感器IHRT46B/4-S12 50106551镜反射传感器IHRT46B/4,200-S12 50106553镜反射传感器HRT46B/4D-S12 50106550镜反射传感器IHRT46B/4D-S12 50106552镜反射传感器IHRT46B/4D,200-S12 50106554镜反射传感器HRT46B/44-S12 50106546镜反射传感器HRT46B/66-S12 50106547镜反射传感器HRT46B/66,200-S12 50106548 镜反射传感器HRT46B/7-S12 50106562 镜反射传感器HRT46B/4.1-550F-S12 50106565 镜反射传感器HRT46B/66-550F-S12 50106566 镜反射传感器HRT46B/66.1-550F-S12 50106564 漫反激光传感器HRTL46B/66-S12 50106560 漫反激光传感器HRTL46B/66,200-S12 5010656153系列镜反射传感器RKR53/6.42-S8.3 50107608 镜反射传感器RKR53/6.42-S8 50107607 镜反射传感器RKR53/6.42,200-S8 50105790 镜反射传感器PRK53/6.22-S8.3 50107604 镜反射传感器PRK53/6.22-S8 50107603 镜反射传感器PRK53/6.22,200-S8 50105789 镜反激光传感器PRKL53/6.22-S8.3 50107606 镜反激光传感器PRKL53/6.22-S8.3 50107605 镜反激光传感器PRKL53/6.22,200-S8 50105791 漫反射传感器HRTR53/6-S8.3 50107500 漫反射传感器HRTR53/6,200-S8.3 50107502 漫反射传感器HRTR53/66-S8 50107499 漫反射传感器HRTR53/6-S-S8.3 50107504 漫反射传感器HRTR53/6-S,200-S8.3 50107506 漫反射传感器HRTR53/66-S-S8 50107503 漫反射传感器HRTR53/66-S,200-S8 50107505 漫反射传感器HRTR53/6-XL-S8.3 50107508 漫反射传感器HRTR53/6-XL,200-S8.3 50107510 漫反射传感器HRTR53/66-XL-S8 50107507 漫反射传感器HRTR53/66-XL,200-S8 5010750955系列镜反射传感器RKR55/6.42-S8.3 50107601 镜反射传感器RKR55/ 6.42-S8 50105794 镜反射传感器RKR55/6.42,200-S12 50105795 镜反射传感器PRK55/6-S8.3 50107600 镜反射传感器PRK55/66-S8 50105804 镜反射传感器PRK55/66,200-S12 50105805 镜反射传感器PRK55/6.22-S8.3 50107599 镜反射传感器PRK55/6.22-S8 50105792 镜反射传感器PRK55/6.22,200-S12 50105793 镜反激光传感器PRKL55/6.22-S8.3 50107602 镜反激光传感器PRKL55/6.22-S8 50105796 镜反激光传感器PRKL55/6.22,200-S12 50105797 漫反射传感器HRTR55/66-S8 50107484漫反射传感器HRTR55/6-S8.3 50107491漫反射传感器HRTR55/66,200-S12 50107492漫反射传感器HRTR55/66-S-S8 50107493漫反射传感器HRTR55/6-S-S8.3 50107494漫反射传感器HRTR55/66-S,200-S12 50107495漫反射传感器HRTR55/66-XL-S8 50107496漫反射传感器HRTR55/6-XL-S8.3 50107497漫反射传感器HRTR55/66-XL,200-S12 50107498对射型传感器ILSR95/44.8L.1 50034509 50034510 对射型传感器ILS95/44.8L.1 50026835 50026836 镜反射传感器PRK95/44L 50034511镜反射传感器IPRK95/44L.5 50034512镜反射传感器IPRK95/4.8L.2 50030257镜反射传感器IPRK95/44L.2 50022680镜反射传感器IPRK95/44L.21 50102613镜反射传感器PRK95/4L.2 50027993镜反射传感器IPRK95/44L.3 50022681镜反射传感器IPRK95/44L.4 50025609镜反射传感器PRK95/22L.4 50029051漫反射传感器RKR95/44-600L 50034513漫反射传感器IRKR95/44-250L 50025612漫反射传感器IRK95/44-250L 50025611漫反射传感器FRKR95/44-350L 50031514漫反射传感器FRK95/44-350L 50034515漫反射传感器FRKR95/44-150L 50025610漫反射传感器FRK95/44-150 ********漫反射传感器FRK95/22-150L 5002279496系列直流对射型传感器LS96M/P-181W-4 50031574 50031575 对射型传感器LS96M/P-186W-4 50032129 50032128 对射型传感器LS96M/P-181W-2 50032835 50032741 对射型传感器LS96M/P-1170-2 50025217 50025195 对射型传感器LS96M/P-3010-4 50025228 50034128 对射型传感器LS96M/P-3012-4 50103290 50103291 对射型传感器LS96M/P-3010-2 50025225 50082296 对射型传感器LS96M/P-3012-2 50025223 50033328 对射型传感器LS96M/P-1040-4 50025228 50025205 对射型传感器LS96M/P-1130-2 50025223 50025201 对射型传感器LS96M/N-1010-2 50025225 50031295 对射型传感器LS96M/P-3012-2 50106871 50033328 对射型传感器LS96M/P-1170-4 50032129 50025197 对射型传感器LS96K/P-1140-2 50080657 50030269 对射型传感器LS96K/P-1015-4 50025254 50003004对射型传感器LS96K/P-1010-4 50025254 50025258 对射型传感器LS96K/P-1030-4 50025254 50080483 对射型传感器LS96K/P-1030-2 50025255 50025259 镜反射传感器RK96M/P-1440-21 50030648镜反射传感器PRK96M/P-3380-41 50061452镜反射传感器PRK96M/P-3360-21 50082065镜反射传感器PRK96M/P-3366-27 50102379镜反射传感器PRK96M/P-1361.1-47 50104279镜反射传感器PRK96M/P-1362-47 50080477镜反射传感器PRK96M/P-1361-47 50082092镜反射传感器PRK96M/P-1370-42 50025186镜反射传感器PRK96M/P-1400-42 50031549镜反射传感器PRK96M/P-1370-22 50025178镜反射传感器PRK96M/P-1400-22 50025178镜反射传感器PRK96M/P-1832-41 50105622镜反射传感器PRK96M/P-1838-41 50080760镜反射传感器PRK96M/P-1838-21 50029880镜反射传感器PRK96M/P-2838-28 50082060镜反射传感器PRK96M/P-1830-41 50080469镜反射传感器PRK96M/P-1830-21 50028975镜反射传感器PRK96K/P-3368-41 50041042镜反射传感器PRK96K/P-1363-29 50080656镜反射传感器PRK96K/P-1361-29 50080476镜反射传感器PRK96K/P-1365-45 50103003镜反射传感器PRK96K/P-1360.1-41 50103216镜反射传感器PRK96K/P-1360-41 50025165镜反射传感器PRK96K/P-1380-41 50025166镜反射传感器PRK96K/P-1360-21 50025163镜反射传感器PRK96K/N-1380-46 50081325镜反射传感器RT96M/P-1374-500-42 50041596镜反射传感器RT96M/P-1474-800-42 50041597镜反射传感器RT96K/P-1444-800-41 50081178镜反射传感器RT96K/P-1444-800-21 50081177镜反射传感器RT96K/N-1444-800-46 50041595漫反射传感器HRT96M/P-1635-800-45 50104142漫反射传感器HRT96M/P-1630-800-41 50080047漫反射传感器HRT96M/P-1636-800-41 50032127漫反射传感器HRT96M/P-1640-800-41 50025126漫反射传感器HRT96M/P-1640-800-21 50025124漫反射传感器HRT96M/P-3604-2000-42 50060858漫反射传感器HRT96M/P-1600-2000-42 50060857漫反射传感器HRT96M/P-1610-1200-41 50025118漫反射传感器HRT96M/P-1620-1200-41 50061102漫反射传感器HRT96M/P-1610-1200-21 50025116漫反射传感器HRT96M/P1620-1200-21 50025114漫反射传感器HRT96M/N1606-1200-27 50040358漫反射传感器HRT96M/P-3370-5000-436 50040556漫反射传感器HRT96M/P-3375-5000-436 50040682漫反射传感器HRT96M/P-3360-5000-426 50039470漫反射传感器HRT96M/P-336W.21-5000-426 50102286漫反射传感器HRT96M/P-3360-2500-426 50104825漫反射传感器HRT96K/P-1631-800-47 50038471漫反射传感器HRT96K/P1630-800-41 50080242漫反射传感器HRT96K/P1640-800-41 50081464漫反射传感器HRT96K/P-1630-800-21 50080327漫反射传感器HRT96K/P-1600-1800-41 50105667漫反射传感器HRT96K/P-1607-1200-49 50103090漫反射传感器HRT96K/P-1605-1200-45 50103217漫反射传感器HRT96K/P-1600-1200-41 50025133漫反射传感器HRT96K/P-1600-1200-21 5002513596系列/交流－直流对射型传感器LS96M/R-176W-2 50032004 50032003 对射型传感器LS96M/R-3310-2 50080081 50031651 对射型传感器LS96M/R-1310-2 50080081 50080080 对射型传感器LS96K/R-1310-2 50025253 50025257 对射型传感器LS96K/R-1320-2 50025253 50025256 镜反射传感器RK96K/R-1560-25 50080484镜反射传感器PRK96M/R-3420-25 50082066镜反射传感器PRK96M/R-3430-25 50061111镜反射传感器PRK96M/R-1858-25 50029881镜反射传感器PRK96M/R-1850-25 50080470镜反射传感器PRK96K/R-3428-25 50035351镜反射传感器PRK96K/R-1420-25 50025167镜反射传感器PRK96K/R-1420.1-25 50105587镜反射传感器PRK96K/R-1420.1-25 50105587镜反射传感器PRK96K/R-1430-25 50025168漫反射型传感器RT96M/R-1574-800-25 50041598漫反射型传感器HRT96M/R-1680-1200-25 50080076漫反射型传感器HRT96M/R-1690-1200-25 50080075漫反射型传感器HRT96K/R-1680-1200-25 50025132漫反射型传感器HRT96K/R-1690-1200-25 50025131318系列对射型传感器LS318M/P-72-S12 50083160 50083161 对射型传感器LS318M/P-70-S12 50082177 50081340 对射型传感器LS138M/P-70 50082188 50081342 对射型传感器LS318M/P-S12 50081339 50081340对射型传感器LS318M/P 50081341 50081342 对射型传感器LS318WM/P-S12 50082154 50082158 对射型传感器LS318WM/P 50082152 50082156 对射型传感器LS318WM/N 50082152 50083246 对射型传感器LS318K/P-70-S12 50082195 50081336 对射型传感器LS318K/P-70 50082176 50081338 对射型传感器LS318K/N-70 50082176 50083111 对射型传感器LS318K/P-S12 50081335 50081336 对射型传感器LS318K/P 50081337 50081338 对射型传感器LS318K/N-S12 50081335 50082140 对射型传感器LS318WK/P-S12 50082153 50082157 对射型传感器LS318WK/PN-S12 50082153 50083232 对射激光传感器LSL318M/P-S12 50083172 50083176 对射激光传感器LSL318M/P 50083171 50083175 对射激光传感器LSL318M/P-B5-S12 50083172 50083180 对射激光传感器LSL318M/P-B5 50083171 50083179 对射型传感器LSL318K/P-S12 50083170 50083174 对射型传感器LSL318K/P 50083169 50083173 对射型传感器LSL318K/N 50083169 50083247 对射型传感器LSL318K/P-B5-S12 50083170 50083178 对射型传感器LSL318K/P-B5 50083169 50083177 镜反传感器PRK318M/P-S12 50081349镜反传感器PRK318M/P 50081350镜反传感器PRK318M/N-S12 50082145镜反传感器PRK318M/N 50083140镜反传感器PRK318WM/P-S12 50082166镜反传感器PRK318WM/P 50082164镜反传感器PRK318K/P-S12 50081347镜反传感器PRK318K/P 50081348镜反传感器PRK318K/N-S12 50083151镜反传感器PRK318K/N 50082187镜反传感器PRK318WK/P-S12 50082165镜反传感器PRK318WK/P 50082163镜反传感器PRKL318M/P-S12 50083184镜反传感器PRKL318M/P 50083183镜反激光传感器PRKL318K/P-S12 50083182镜反激光传感器PRKL318K/P 50083181漫反射传感器RT318M/P-550-S12 50082196漫反射传感器RT318M/P-550 50082198漫反射传感器RT318M/P-400-S12 50081353漫反射传感器RT318WM/P-400-S12 50082174漫反射传感器RT318M/P-400 50081354漫反射传感器RT318M/N-400-S12 50082147漫反射传感器RT318M/N-400 50083112漫反射传感器RT318M/P-200-S12 50081357 漫反射传感器RT318M/P-200 50081358 漫反射传感器RT318M/N-200-S12 50083102 漫反射传感器RT318WM/P-100-S12 50082170 漫反射传感器RT318WM/P-100-S12.11 50083249 漫反射传感器RT318WM/P-50-S12.11 50083248 漫反射传感器RT318K/P-550-S12 50082175 漫反射传感器RT318K/P-550 50082197 漫反射传感器RT318K/N-550-S12 50083194 漫反射传感器RT318K/P400-S12 50081351 漫反射传感器RT318K/P-400 50081352 漫反射传感器RT318WK/P-400-S12 50082173 漫反射传感器RT318WK/P-400 50082171 漫反射传感器RT318K/N-400-S12 50082146 漫反射传感器RT318K/N-400-S12 50083113 漫反射传感器RT318K/P-200-S12 50081355 漫反射传感器RT318K/P-200 50081356 漫反射传感器RT318K/N-200-S12 50082148 漫反射传感器RT318K/N-200 50083163 漫反射传感器RT318WK/P-100-S12 50082169 漫反射传感器RT318WK/P-100 50082167 漫反射传感器RT318WK/N-100-S12 50083139 漫反射传感器RT318K/P-100-S12.11 50083244 漫反射传感器RT318K/P-50-S12.11 50083243 漫反激光传感器RTL318M/P-300-S12 50083188 漫反激光传感器RTL318K/P-300-S12 50083186 漫反激光传感器RTL318K/P-300 50083185 漫反射传感器HRTR318M/66-120-S12 50106086 漫反射传感器HRTR318M/66-120 50106090 漫反射传感器HRTR318K/66-120-S12 50106085 漫反射传感器HRTR318K/66-120 50106089412系列对射传感器SETLS412M/P-S12 50081431 镜反传感器PRK412M/P-S12 50081407 镜反传感器PRK412M/P 50081408 漫反传感器RT412M/P-200-S12 50081409 漫反传感器RT412M/P-200 50081401618系列对射传感器SETLS618/4-S12 50038451 镜反传感器PRK618/4-S12 50038450 漫反传感器RT618/4-200-S12 50038449。

格力空调KFR-26GW BpSHA~KFR-35GW BpSHA 使用安装说明书

–使用安装说明书–分体挂壁式冷暖变频空调器型号：KFR-26GW/BpSHA、KFR-35GW/BpSHA KFR-26GW/BpFHA、KFR-35GW/BpFHAKFR-26GW/BpHHA、KFR-35GW/BpHHAKFR-26GW/BpCHA、KFR-35GW/BpCHA机种名：RAK-SH09PHAPC/RAC-SH09WHAPC RAK-SH12PHAPC/RAC-SH12WHAPCRAK-FH09PHAPC/RAC-FH09WHAPCRAK-FH12PHAPC/RAC-FH12WHAPCRAK-HH09PHAPC/RAC-HH09WHAPCRAK-HH12PHAPC/RAC-HH12WHAPCRAK-CH09PHAPC/RAC-CH09WHAPCRAK-CH12PHAPC/RAC-CH12WHAPC145912146 5目录安全警示产品简介使用说明产品使用条件产品有毒有害物质声明技术参数遥控器介绍Wi -Fi 功能机器的维护保养安装说明使用产品前，请仔细阅读本说明书，并妥善保管。

安装前注意事项安装简图安装程序及重点清除空气顺序检查运行 15 16 1723 24 25空调器安装确认单空调器安装服务监督卡保修单附1附2附3服务指南敬告用户特别提示附4注意安全警示1.本空调器使用环保的R32制冷剂，该制冷剂无色无味，属于可燃制冷剂；2.在安装、使用、维修前，请先阅读专业手册；3.安装、移机或维修时，请委托经销商或专门技术人员安装；4.所有作业人员或制冷回路维修人员都应获得行业认可的评估机构颁发的有效证书，以认定其具备行业认可的评估规范所要求的安全处置制冷剂的资质；5.务必按照设备制造商推荐的方法进行设备的维护和修理。

如果需要其他专业人员协助维护和修理设备,则应在具备使用可燃制冷剂资质的人员监督下进行；6.应遵守国家有关气体法规的规定；7.空调器安装、运行和存放时的房间面积必须不小于4m 2；8.空调器的贮存应能防止因事故引起的机械损伤；9.请勿刺破或点燃空调器；10.除厂商特别推荐，不要使用任何方法来加速除霜过程或对结霜部分进行；11.必须采用真空泵进行排空工作，严禁采用机身内制冷剂。

彩电机心对照表

彩电“机心”对照表作者：mltcl*性质：转载*发表时间：2005-7-6 11:08:37*人气：4040型号机芯类型北京836 X-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193,行管编号Q502，开关管编号Q901 北京837 东芝X-56P，TA7607AP，TA7243P，TA7193P，TA7609P，行管编号Q404，开关管编号Q801北京837—1X-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193P,行管编号Q404,开关管编号Q801 北京837－2胜利六片（JVC7175)，TA7607AP,HA11404,HA11244,TA7622AP,HA11107,AN5620,UPC1009C,AN5900北京838胜利六片（JVC7175)，TA7607AP,HA11404,HA11244,TA7622AP,HA11107,AN5620,UPC1009C,AN5900北京839改进型胜利六片（JVC7175)，TA7607AP，HA11404，HA11244，TA7622AP，HA11107，AN5620，UPC1363C，AN5900北京839—1改进型胜利六片（JVC7175)，TA7607AP，HA11404，HA11244，TA7622AP，HA11107，AN5620，UPC1363C，AN5900北京839—2(G 改进型胜利TA两片（JVC7698)，TA7680AP,TA7698AP,AN5265,STR54041北京2132MA 三洋A3，LA7680，LA7837，AN5265，M34300N4-624SP，LA7910，LC4006北京8303 东芝X-56P，TA7607AP，TA7243P，TA7193P，TA7609P，行管编号Q404，开关管编号Q801北京83O5 改进型胜利TA两片（JVC7698)，TA7680AP,TA7698AP,AN5265,STR54041北京8305－2D1 改进型胜利TA两片（JVC7698)，TA7680AP,TA7698AP,AN5265,STR54041北京8305—2ps 改进型胜利TA两片（JVC7698)，TA7680AP,TA7698AP,AN5265,STR54041北京8306 东芝L851(东芝TA两片），TA7680AP，TA7698AP，STR5412，行管编号Q404北京8311 东芝L851(东芝TA两片），TA7680AP，TA7698AP，STR5412，行管编号Q404北京8313 改进型胜利TA两片（JVC7698)，TA7680AP,TA7698AP,AN5265,STR54041北京8314 东芝L851(东芝TA两片），TA7680AP，TA7698AP，STR5412，行管编号Q404北京8316 改进型东芝TA两片+三菱M50436-560SP遥控系统北京8316—1 改进型东芝TA两片+三菱M50436-560SP遥控系统北京8316—2 改进型东芝TA两片+三菱M50436-560SP遥控系统北京832O 改进型三洋83PG，（M51354AP/UPC1423CA）+东芝CTS-130A遥控系统北京8320—1 改进型三洋83PG，（M51354AP/UPC1423CA）+东芝CTS-130A遥控系统北京8320—2 改进型三洋83PG，（M51354AP/UPC1423CA）+东芝CTS-130A遥控系统北京832O—3 改进型三洋83PG，（M51354AP/UPC1423CA）+东芝CTS-130A遥控系统北京832OA 三洋A3，LA7680，LA7837，AN5265，M34300N4-624SP，LA7910，LC4006北京8336 三洋A3，LA7680，LA7837，AN5265，M34300N4-624SP，LA7910，LC4006北京8343 改进型胜利TA两片（JVC7698)，TA7680AP,TA7698AP,AN5265,STR54041北京8345I 改进型三洋83PG，（M51354AP/UPC1423CA）+东芝CTS-130A遥控系统北京8353 三洋A3，LA7680，LA7837，AN5265，M34300N4-624SP，LA7910，LC4006北京8355A 三洋A3，LA7680，LA7837，AN5265，M34300N4-624SP，LA7910，LC4006北京2656改进型胜利六片（JVC7175)，TA7607AP，HA11404，HA11244，TA7622AP，HA11107，AN5620，UPC1363C，AN5900长城G8135BF 长城G8135YF，TMS73C47，ST93C46，TA8701AN，AN5601K，LA7830，TBA820M长城G8135YF 长城G8135YF，TMS73C47，ST93C46，TA8701AN，AN5601K，LA7830，TBA820M长城G8135YN东芝TA两片，TMP47C434N-3546，TC89101，TA8690AN，TC4052，TA8445K，TBA820M长城G8148YNK东芝TA两片，TMP47C434N-3546，TC89101，TA8690AN，TC4052，TA8445K，TBA820M长城G8163MF长城（画龙）MF机芯，MN15287KWE，MN12C201D，TA8659BN，（TA8759BN），TA8611AN，TA8615N，AN5521（TA8427），TDA2009（TA8211AH），STR-S6309，SE-130长城G8171MF长城（画龙）MF机芯，MN15287KWE，MN12C201D，TA8659BN，（TA8759BN），TA8611AN，TA8615N，AN5521（TA8427），TDA2009（TA8211AH），STR-S6309，SE-130长城G8173MF长城（画龙）MF机芯，MN15287KWE，MN12C201D，TA8659BN，（TA8759BN），TA8611AN，TA8615N，AN5521（TA8427），TDA2009（TA8211AH），STR-S6309，SE-130长城G8251BF 长城G8135YF，TMS73C47，ST93C46，TA8701AN，AN5601K，LA7830，TBA820M长城G8253MF长城（画龙）MF机芯，MN15287KWE，MN12C201D，TA8659BN，（TA8759BN），TA8611AN，TA8615N，AN5521（TA8427），TDA2009（TA8211AH），STR-S6309，SE-130长城G8253YNTA8759BN/TA7680AP，PCA84C444，PCF8581P（PCF8582P），TA7680AP，TA8759BN，M51326P，LA7830，LA7910，TDA1013B长城G8263MF长城（画龙）MF机芯，MN15287KWE，MN12C201D，TA8659BN，（TA8759BN），TA8611AN，TA8615N，AN5521（TA8427），TDA2009（TA8211AH），STR-S6309，SE-130长城G8271MF长城（画龙）MF机芯，MN15287KWE，MN12C201D，TA8659BN，（TA8759BN），TA8611AN，TA8615N，AN5521（TA8427），TDA2009（TA8211AH），STR-S6309，SE-130长城G8363MF长城（画龙）MF机芯，MN15287KWE，MN12C201D，TA8659BN，（TA8759BN），TA8611AN，TA8615N，AN5521（TA8427），TDA2009（TA8211AH），STR-S6309，SE-130长城G8453BF 长城G8135YF，TMS73C47，ST93C46，TA8701AN，AN5601K，LA7830，TBA820M长城JTC371X-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193P,行管编号Q404,开关管编号Q801 长城JTC471 东芝X56P，TA7607AP，TA7243AP，TA7193AP，TA7609P长城JTC471—1 东芝X56P，TA7607AP，TA7243AP，TA7193AP，TA7609P长城JTC471－1A 东芝X56P，TA7607AP，TA7243AP，TA7193AP，TA7609P长城JTC471—2 东芝X56P，TA7607AP，TA7243AP，TA7193AP，TA7609P长城JTC471—2A 东芝X56P，TA7607AP，TA7243AP，TA7193AP，TA7609P长城JTC471—2F 东芝X56P，TA7607AP，TA7243AP，TA7193AP，TA7609P 长城JTC472东芝L851，TA7680AP，TA7698AP，STR5412长城JTC512陆氏1型，M50431-101SP，M58655P，M50453-012P，TA7680AP，TA7698AP，AN5265，LA7910，TC4066，STR41090长城JTC532改进型陆氏1型，TMP47C433AN，TM843AP，TC9020P-003，TA7680AP，TA7698AP，AN5265，LA7910，TC4066，STR41090长虹A2116三洋A6机芯，LA7688N（LA7687N），LC89950，LA7642，AN5265，LA7837，LC864512，AT24C02（AT24C04），HEF4052长虹A2117三洋A6机芯，LA7688N（LA7687N），LC89950，LA7642，AN5265，LA7837，LC864512，AT24C02（AT24C04），HEF4052长虹A2518三洋A6机芯，LA7688N（LA7687N），LC89950，LA7642，AN5265，LA7837，LC864512，AT24C02（AT24C04），HEF4052长虹A2528三洋A6机芯，LA7688N（LA7687N），LC89950，LA7642，AN5265，LA7837，LC864512，AT24C02（AT24C04），HEF4052长虹C1492 飞利浦TDA8305A/TDA3565，TDA3653B，TDA2611A长虹C1742松下M11+东芝CTS-130A，TMP47C433AN-3849，TC89101P，TC9020P-003，AN5132，AN5435，AN5612，AN5622，AN5250长虹C1842松下M11+三菱M50431-101SP，M58655P，M50453-012SP，LA7910，AN5132，AN5435，AN5612，AN5622，AN5250长虹C1843松下M11+三菱M50431-101SP，M58655P，M50453-012SP，LA7910，AN5132，AN5435，AN5612，AN5622，AN5250长虹C1844松下M11+三菱M50431-101SP，M58655P，M50453-012SP，LA7910，AN5132，AN5435，AN5612，AN5622，AN5250长虹C1851 三洋A3，M34300N4-624SP，LA7681，LA7837，AN5265，LA7910，LC4066长虹C1941松下M11+东芝CTS-130A，TMP47C433AN-3849，TC89101P，TC9020P-003，AN5132，AN5435，AN5612，AN5622，AN5250长虹C1942松下M11+东芝CTS-130A，TMP47C433AN-3849，TC89101P，TC9020P-003，AN5132，AN5435，AN5612，AN5622，AN5250长虹C1951 三洋A3，M34300N4-624SP，LA7681，LA7837，AN5265，LA7910，LC4066长虹C2141松下M11+三菱M50436-560SP，M58655P，M54573L，AN5132，AN5435，AN5612，AN5622，AN5250长虹c2142松下M11+三菱M50436-560SP，M58655P，M54573L，AN5132，AN5435，AN5612，AN5622，AN5250长虹C2143松下M11+东芝CTS-130A，TMP47C433AN-3849，TC89101P，TC9020P-003，AN5132，AN5435，AN5612，AN5622，AN5250长虹C2151 三洋A3，M34300N4-624SP，LA7681，LA7837，AN5265，LA7910，LC4066长虹C2151A 三洋A3，M34300N4-624SP，LA7681，LA7837，AN5265，LA7910，LC4066长虹C2151C 三洋A3，M34300N4-624SP，LA7681，LA7837，AN5265，LA7910，LC4066长虹C2151Z 三洋A3，M34300N4-624SP，LA7681，LA7837，AN5265，LA7910，LC4066长虹C2152 三洋A3，M34300N4-624SP，LA7681，LA7837，AN5265，LA7910，LC4066长虹C2152KV 三洋A3，M34300N4-624SP，LA7681，LA7837，AN5265，LA7910，LC4066长虹C2153 三洋A3，M34300N4-624SP，LA7681，LA7837，AN5265，LA7910，LC4066长虹C2161长虹TA机芯，TMP47C433AN,TC89101P,TC9020P-003，TA7680AP，TA7698AP，LA7910，TDA1013B （TDA2009），TC4066长虹C2162长虹TA机芯，TMP47C433AN,TC89101P,TC9020P-003，TA7680AP，TA7698AP，LA7910，TDA1013B （TDA2009），TC4066长虹C2163长虹TA机芯，TMP47C433AN,TC89101P,TC9020P-003，TA7680AP，TA7698AP，LA7910，TDA1013B （TDA2009），TC4066 长虹C2164长虹TA机芯，TMP47C433AN,TC89101P,TC9020P-003，TA7680AP，TA7698AP，LA7910，TDA1013B （TDA2009），TC4066长虹C2165长虹TA机芯，TMP47C433AN,TC89101P,TC9020P-003，TA7680AP，TA7698AP，LA7910，TDA1013B （TDA2009），TC4066长虹C2165P长虹TA机芯，TMP47C433AN,TC89101P,TC9020P-003，TA7680AP，TA7698AP，LA7910，TDA1013B （TDA2009），TC4066长虹C2165Y长虹TA机芯，TMP47C433AN,TC89101P,TC9020P-003，TA7680AP，TA7698AP，LA7910，TDA1013B （TDA2009），TC4066长虹C2166长虹TA机芯，TMP47C433AN,TC89101P,TC9020P-003，TA7680AP，TA7698AP，LA7910，TDA1013B （TDA2009），TC4066长虹C2168长虹TA机芯，TMP47C433AN,TC89101P,TC9020P-003，TA7680AP，TA7698AP，LA7910，TDA1013B （TDA2009），TC4066长虹C2169长虹TA机芯，TMP47C433AN,TC89101P,TC9020P-003，TA7680AP，TA7698AP，LA7910，TDA1013B （TDA2009），TC4066长虹C2188长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2191飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2192飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2518长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C2523飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2588长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2588A长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2588B长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2588P长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2589长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2589A长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2589P长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628长虹C2589V长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2589Z长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2591飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2591A飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2591V飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2591AV飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2591AZ飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2592飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2593飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2594飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2595飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C2918B长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C2919长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C2919D长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C2919P长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C2919PB长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C2919PN长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C2919PS长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C2919PV长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹c2939长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C2939KS长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C2988长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2988P长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2988z长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2988PV长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2989长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2989V长虹NC-2,TMP47C1238ANU068,TC89101P,UPD6336C,LA7910，TA7680AP，TA7698AP，TA8211AH，TA8628N，TA8776N长虹C2992飞利浦TDA8362/8361单片机芯，PCA84C841,PCF8582，TDA8362，TDA4461，TDA8395，TDA8425，TDA3654（TDA3653），TDA1521A，TDA6103Q，HEF4052长虹C3418D长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C3418PN长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C3418PS长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C3418PSI长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C3419长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹C3419N长虹NC-3，[TMP47C1638AU353，40频道][TMP47C1638AU357，90频道][TMB77CM36，24C04，100频道]，TA8783，TA8859P，TA8427，TA8800，TA8777N，SBX1765，CXA1686M，AN5432K，CX20125，TA8814，TA8211AH，TA8218A等长虹CJ37A 松下M11，AN5132，AN5435，AN5612，AN5622，AN5250 长虹CJ47A松下M11，AN5132，AN5435，AN5612，AN5622，AN5250长虹CJ51A 松下M11，AN5132，AN5435，AN5612，AN5622，AN5250长虹CJK44A松下M11+三菱M50431-101SP，M58655P，M50453-012SP，LA7910，AN5132，AN5435，AN5612，AN5622，AN5250长虹CJK47A1松下M11+三菱M50431-101SP，M58655P，M50453-012SP，LA7910，AN5132，AN5435，AN5612，AN5622，AN5250长虹CJK51A松下M11+三菱M50431-101SP，M58655P，M50453-012SP，LA7910，AN5132，AN5435，AN5612，AN5622，AN5250长虹CJK51B1TA（陆氏1）两片，M50431-101SP，M58655P，M50453-012，LA7910，TA7680AP，TA7698AP，AN5265，TC4066，STR41090长虹CJK53B改进型TA（陆氏1）两片，TMP47C433AN，TMM843AP，TC9020P-003，TA7680AP，TA7698AP，AN5265，STR41090长虹CJK56BTA（陆氏1）两片，M50431-101SP，M58655P，M50453-012，LA7910，TA7680AP，TA7698AP，AN5265，TC4066，STR41090长虹CJK51B2TA（陆氏1）两片，M50431-101SP，M58655P，M50453-012，LA7910，TA7680AP，TA7698AP，AN5265，TC4066，STR41090长虹CJK53B2改进型TA（陆氏1）两片，TMP47C433AN，TMM843AP，TC9020P-003，TA7680AP，TA7698AP，AN5265，STR41090长虹CJK56B2TA（陆氏1）两片，M50431-101SP，M58655P，M50453-012，LA7910，TA7680AP，TA7698AP，AN5265，TC4066，STR41090长虹CK44A松下M11+东芝CTS-130A，TMP47C433AN-3849，TC89101P，TC9020P-003，AN5132，AN5435，AN5612，AN5622，AN5250长虹CK53A松下M11+三菱M50436-560SP，M58655P，M54573L，AN5132，AN5435，AN5612，AN5622，AN5250 成都C37－844BX-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193,行管编号Q502，开关管编号Q901 成都C47-851 三洋83P，M51354AP，UPC1423CA，LA4265，LA7830，JUO114成都C51-851 三洋83P，M51354AP，UPC1423CA，LA4265，LA7830，JUO114 成都C53-871三洋83P，M51354AP，UPC1423CA，LA4265，LA7830，JUO114创维CTV-2108 ST63156，TDA8224，TDA8219，TDA8214，TDA1905创维CTV-2110 飞利浦CTV-222PRC，TDA2549，TDA2640-2，TA8659AN 创维CTV-2140飞利浦CTV-222PRC，TDA2549，TDA2640-2，TA8659AN创维CTV-216O 飞利浦CTV-222PRC，TDA2549，TDA2640-2，TA8659AN创维CTV-2550C 飞利浦CTV-222PRC，STR-S6309，TDA2549，TDA2461，TA8659AN创维CTV-2939WF 飞利浦CTV-222PRC，STR-S6309，TDA2549，TDA2461，TA8659AN创维CTV—8218 飞利浦CTV-222PRC，TDA2549，TDA2640-2，TA8659AN 创维CTV-8259飞利浦CTV-222PRC，STR-S6309，TDA2549，TDA2461，TA8659AN 创维CTV-8259WF飞利浦CTV-222PRC，STR-S6309，TDA2549，TDA2461，TA8659AN 创维CTV-8259KNK飞利浦CTV-222PRC，STR-S6309，TDA2549，TDA2461，TA8659AN创维CTV－8298DX 飞利浦CTV-222PRC，STR-S6309，TDA2549，TDA2461，TA8659AN创维CTV－8298WF 飞利浦CTV-222PRC，STR-S6309，TDA2549，TDA2461，TA8659AN创维CTV－8298KNK 飞利浦CTV-222PRC，STR-S6309，TDA2549，TDA2461，TA8659AN春风14C-1X-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193,行管编号Q502，开关管编号Q901 德律风根1301德律风根415，615机芯，TDA4440，TDA3560，TBA120T，TDA1905（TDA1908，TBA810），TDA1940（TDA1950），TDA1170（TDA1770，TDA1870）德律风根2006德律风根415，615机芯，TDA4440，TDA3560，TBA120T，TDA1905（TDA1908，TBA810），TDA1940（TDA1950），TDA1170（TDA1770，TDA1870）德律风根2016德律风根415，615机芯，TDA4440，TDA3560，TBA120T，TDA1905（TDA1908，TBA810），TDA1940（TDA1950），TDA1170（TDA1770，TDA1870）德律风根50O0德律风根415，615机芯，TDA4440，TDA3560，TBA120T，TDA1905（TDA1908，TBA810），TDA1940（TDA1950），TDA1170（TDA1770，TDA1870）德律风很5016德律风根415，615机芯，TDA4440，TDA3560，TBA120T，TDA1905（TDA1908，TBA810），TDA1940（TDA1950），TDA1170（TDA1770，TDA1870）德律风根6016德律风根415，615机芯，TDA4440，TDA3560，TBA120T，TDA1905（TDA1908，TBA810），TDA1940（TDA1950），TDA1170（TDA1770，TDA1870）德律风根6060X德律风根415，615机芯，TDA4440，TDA3560，TBA120T，TDA1905（TDA1908，TBA810），TDA1940（TDA1950），TDA1170（TDA1770，TDA1870）德律风根6216德律风根415，615机芯，TDA4440，TDA3560，TBA120T，TDA1905（TDA1908，TBA810），TDA1940（TDA1950），TDA1170（TDA1770，TDA1870）飞利浦14CT6020飞利浦CTO6050/93T，TDA3541，TDA2577A，TDA3561A，TBA120AS，TDA2611AQ，TDA3561AQ飞利浦16CT6025飞利浦CTO6050/93T，TDA3541，TDA2577A，TDA3561A，TBA120AS，TDA2611AQ，TDA3561AQ 飞利浦20CT3010 飞利浦KT3机芯，TDA2581Q飞利浦20CT3030 飞利浦KT3机芯，TDA2581Q飞利浦20CT6050 飞利浦CTO6050/93T，TDA3541，TDA2577A，TDA3561A，TBA120AS飞利浦20CT6160飞利浦CTO6050/93T，TDA3541，TDA2577A，TDA3561A，TBA120AS，TDA2611AQ，TDA3561AQ飞利浦20CT6250飞利浦CTO6050/93T，TDA3541，TDA2577A，TDA3561A，TBA120AS，TDA2611AQ，TDA3561AQ飞利浦20CT6360飞利浦TDA4505/TDA3565两片，MSM5840H-87，SAB3013，TDA3541，TDA2577A，TDA3561A，TBA120AS，TDA2611AQ，TDA3651AQ飞利浦20CT6363飞利浦TDA4505/TDA3565两片，MSM5840H-87，SAB3013，TDA3541，TDA2577A，TDA3561A，TBA120AS，TDA2611AQ，TDA3651AQ飞利浦20CT6450飞利浦CTO6050/93T，TDA3541，TDA2577A，TDA3561A，TBA120AS，TDA2611AQ，TDA3561AQ飞利浦20CT6550飞利浦CTO6050/93T，TDA3541，TDA2577A，TDA3561A，TBA120AS，TDA2611AQ，TDA3561AQ飞利浦21B9 I2C总线飞利浦21CN4461／93S飞利浦TDA4505/TDA3565两片，MSM5840H-87，SAB3013，TDA3541，TDA2577A，TDA3561A，TBA120AS，TDA2611AQ，TDA3651AQ飞利浦25B9 I2C总线飞燕DUC47-C4 夏普NC-IIT，IX0718CE，IX0719CE，IX0640CE，IX0365CE，IX0689CE飞跃37C2-3 夏普NC-IIT，IX0718CE，IX0719CE，IX0640CE，IX0365CE，IX0689CE飞跃47C2-2 夏普NC-IIT，IX0718CE，IX0719CE，IX0640CE，IX0365CE，IX0689CE飞跃47C2-3 夏普NC-IIT，IX0718CE，IX0719CE，IX0640CE，IX0365CE，IX0689CE飞跃51C2-1 夏普NC-IIT，IX0718CE，IX0719CE，IX0640CE，IX0365CE，IX0689CE飞跃51C2-2 夏普NC-IIT，IX0718CE，IX0719CE，IX0640CE，IX0365CE，IX0689CE飞跃51C2Y－2夏普NC-IIT机芯+M494遥控系统，IX0718CE，IX0719CE，IX0640CE，IX0365CE，IX0689CE，M494，TDA4433，CH4078，CH4053，TDA2320飞跃C6405夏普NC-IIT机芯+三菱M50436-560SP，M58655，TA7680AP，TA7698AP，LA7833，TDA3810，AN5265，TC4053飞跃FY6405AK夏普NC-IIT机芯+三菱M50436-560SP，M58655，TA7680AP，TA7698AP，LA7833，TDA3810，AN5265，TC4053海燕7185XAX-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193,行管编号Q502，开关管编号Q901 海燕CS37-2X-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193,行管编号Q502，开关管编号Q901 虹美WCD25 夏普NC-IIT，IX0718CE，IX0719CE，IX0640CE，IX0365CE，IX0689CE华日C47J-1 东芝X-56P，TA7607AP，TA7243P，TA7193P，TA7609P，行管编号Q404，开关管编号Q801华日C51J—1 东芝X-56P，TA7607AP，TA7243P，TA7193P，TA7609P，行管编号Q404，开关管编号Q801黄山AH4724C 三洋83P，M51354AP，UPC1423CA，LA4265，LA7830，JUO114 黄山AH4724C—1三洋83P，M51354AP，UPC1423CA，LA4265，LA7830，JUO114黄河HC-37—IIX-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193P,行管编号Q404,开关管编号Q801黄河HC-47—I东芝X-56P，TA7607AP，TA7243P，TA7193P，TA7609P，行管编号Q404，开关管编号Q801黄河HC-47—II东芝X-56P，TA7607AP，TA7243P，TA7193P，TA7609P，行管编号Q404，开关管编号Q801黄河HC—47C—IV东芝X-56P，TA7607AP，TA7243P，TA7193P，TA7609P，行管编号Q404，开关管编号Q801黄山7190HFX-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193,行管编号Q502，开关管编号Q901 金凤C37-4X-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193,行管编号Q502，开关管编号Q901 金河C37—BX-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193,行管编号Q502，开关管编号Q901 金河C37-GX-53P(TA四片），TA7607AP,TA7176AP,TA7609P,TA7193,行管编号Q502，开关管编号Q901 金鹊47DC1 三洋83P，M51354AP，UPC1423CA，LA4265，LA7830，JUO114金鹊47DC1—1 三洋83P，M51354AP，UPC1423CA，LA4265，LA7830，JUO114 金星C4715夏普NC-IIT，IX0718CE，IX0719CE，IX0640CE，IX0365CE，IX0689CE凯歌4C4701 夏普NC-IIT，IX0718CE，IX0719CE，IX0640CE，IX0365CE，IX0689CE凯歌4C4702 东芝X-56P，TA7607AP，TA7243P，TA7193P，TA7609P，行管编号Q404，开关管编号Q801康佳KK-T92OC改进型东芝L851机芯+MN15245KWC遥控系统，MN1220，AN5026K，TA7680AP，TA7698AP，AN5521，TDA1904，STR5412康佳KK-T920CI改进型东芝L851机芯+MN15245KWC遥控系统，MN1220，AN5026K，TA7680AP，TA7698AP，AN5521，TDA1904，STR5412康佳KK-T920CII改进型东芝L851机芯+MN15245KWC遥控系统，MN1220，AN5026K，TA7680AP，TA7698AP，AN5521，TDA1904，STR5412康佳KK-T920CIII改进型东芝L851机芯+东芝TMP47C434N-3526遥控系统，TC89101P，TA7680AP，TA7698AP，LA7830，TDA1904，HCF4066，STR5412康佳KK-T920D改进型夏普NC-IIT+三菱M50436-560SP遥控系统，M58655P，UPD6235C，M54373L，TA7680AP，TA7698AP，LA7830，LA4265康佳KK—T920D1改进型夏普NC-IIT+三菱M50436-560SP遥控系统，M58655P，UPD6235C，M54373L，TA7680AP，TA7698AP，LA7830，LA4265康佳KK—T953P改进型夏普NC-IIT+三菱M50436-560SP遥控系统，M58655P，UPD6235C，M54373L，TA7680AP，TA7698AP，LA7830，LA4265康佳KK-T953PII改进型夏普NC-IIT+三菱M50436-560SP遥控系统，M58655P，UPD6235C，M54373L，TA7680AP，TA7698AP，LA7830，LA4265康佳KK-T953FS改进型东芝L851机芯+MN15245KWC遥控系统，MN1220，AN5026K，TA7680AP，TA7698AP，AN5521，TDA1904，STR5412康佳KK-T953FSII改进型东芝L851机芯+东芝TMP47C434N-3526遥控系统，TC89101P，TA7680AP，TA7698AP，LA7830，TDA1904，HCF4066，STR5412康佳KK-T953FSIII改进型东芝L851机芯+东芝TMP47C434N-3526遥控系统，TC89101P，TA7680AP，TA7698AP，LA7830，TDA1904，HCF4066，STR5412康佳KK-T2106康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TDA2009，TEA2014A，TEA5101A，AN5836，TA8173AP，STR-S6309，SE105，M51327P 康佳KK-T2506康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TDA2009，TEA2014A，TEA5101A，AN5836，TA8173AP，STR-S6309，SE105，M51327P 康佳KK-T2510A改进型康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TA8200AH，TEA2014A，TEA5101A，AN5836，TA8173AP，SE120，M51327P 康佳KK-T251ON改进型康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TA8200AH，TEA2014A，TEA5101A，AN5836，TA8173AP，SE120，M51327P 康佳KK-T2512A改进型康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TA8200AH，TEA2014A，TEA5101A，AN5836，TA8173AP，SE120，M51327P 康佳KK-T2512N改进型康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TA8200AH，TEA2014A，TEA5101A，AN5836，TA8173AP，SE120，M51327P 康佳KK-T2588B飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康佳KK-T2588X飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康佳KK-T2806康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TDA2009，TEA2014A，TEA5101A，AN5836，TA8173AP，STR-S6309，SE105，M51327P 康佳KK-T2910A改进型康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TA8200AH，TEA2014A，TEA5101A，AN5836，TA8173AP，SE120，M51327P 康佳KK-T2910N改进型康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TA8200AH，TEA2014A，TEA5101A，AN5836，TA8173AP，SE120，M51327P 康佳KK-T2916A改进型康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TA8200AH，TEA2014A，TEA5101A，AN5836，TA8173AP，SE120，M51327P 康佳KK-T2916N改进型康佳06机芯，MN15287KWEC（ONWAKWEC），MN12C201D，TA8611AN，TA8615N，TA8759BN，AN5521，TA8200AH，TEA2014A，TEA5101A，AN5836，TA8173AP，SE120，M51327P 康佳KK-T2977B飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康佳KK-T2977X飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康佳KK-T2978B飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康佳KK—T2978X飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康佳KK-T2986B飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康佳KK-T2986X飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康佳KK-T2987B飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康佳KK—T3477B飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康佳KK-T3478B飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康艺MR-5145康艺KTN-5145机芯，TC9150P，AN5010，UPC4558C，TC9153P，TA7680AP，TA7698AP，TDA1904康艺KTN—5143飞利浦TDA8362/8361机芯+M37210M3-800SP（M37210M3-902SP（34吋）），M6M80041P，M54573L，TDA4661（TDA4665），TDA8395，TC4052B，TDA8720AN，TA8173AP，TDA1524A，TDA1521（TA8218AH，TA8200AH），TDA8145，TA8427康艺KTN—5145康艺KTN-5145机芯，TC9150P，AN5010，UPC4558C，TC9153P，TA7680AP，TA7698AP，TDA1904康艺KTN—5147康艺KTN-5145机芯，TC9150P，AN5010，UPC4558C，TC9153P，TA7680AP，TA7698AP，TDA1904昆仑S471 三洋83P，M51354AP，UPC1423CA，LA4265，LA7830，JUO114昆仑TC-817 松下M11，AN5132，AN5435，AN5622，AN5612，AN5250乐华TC-219DH 松下M11，AN5132，AN5435，AN5622，AN5612，AN5250乐华TC—299KD 松下M11，AN5132，AN5435，AN5622，AN5612，AN5250乐华TC—371KDH 松下M11，AN5132，AN5435，AN5622，AN5612，AN5250乐华TC-461KD 松下M11，AN5132，AN5435，AN5622，AN5612，AN5250乐华TC-461KDH 松下M11，AN5132，AN5435，AN5622本文来源:西双版纳家电维修网 /168。

海尔 10公斤波轮洗衣机 EB100B26Pro5 使用说明书

童装适合机洗的童装的轻柔洗涤，运行过程默认带浸泡；
羊毛 2.0kg以下适合机洗的羊毛衣物
桶自洁桶自洁程序可方便您对洗衣机内外桶进行清洁；
标准
一般面料的标准节水洗涤，运行过程中默认带有浸泡标准指示灯常亮：为能效测试程序（额定容量测试请人工选择最高水位，半载容量测试请人工选择*水位，具体请参照水位/水量对应表，此程序包含漂甩二合一功能）。
将被罩拉链拉好,避免小件衣物进入，影响洗涤或烘干效果。
为保障洗涤效果，洗涤物不应过量，投入洗衣机前请先将衣物展开抖松。
洗涤时，为避免衣物的纽扣发出声响，投入洗衣机前请先将衣物的纽扣翻到里面。
附加注意事项：
检查确认衣物是否适合洗衣机洗涤及水洗，以免造成衣物变形、损坏；破损衣物请先行修补后再洗涤；易掉色的衣物请与其他衣物分开洗涤，为提升洗涤效果，使用高水位单次洗涤衣物不超过4件；波轮和内桶部件染色使用洗涤剂可以去除；不易吸水的衣物请用手按入水中，使其浸水湿透后洗涤；对于沾有较多泥灰的衣物，请先去除污物再洗涤；羊毛衣物请在洗涤开始后再投入洗衣机内；请勿将受化学品污染的衣物投入洗衣机内；小件和易缠绕衣物以及羊绒、毛织品、丝织品等易磨损衣物，请装入网袋中洗涤、漂洗、脱水，以免造成损伤；易掉毛屑、易沾毛屑、易磨损衣物请根据颜色深浅分开洗涤，或将衣物装入网袋中洗涤、漂洗、脱水，以免衣物互相附着毛屑；
羊毛默认6水位，用户可自己选择4-10水位
选择桶自洁时，程序默认10水位，按动水位按键，洗衣机不动作
温馨提示：根据用户具体使用情况，建议每月设置一次高水位洗涤过程，有利于更好的清洁洗衣桶
非预约状态数码管显示到洗衣结束剩余的时间（按分钟显示）
“预约”启动后，您选择程序的指示灯灭，数码管闪烁，显示剩余的预约时间（小时）。