ECH06A20-F中文资料
耐高温镍基合金型号大全
耐高温镍基合金型号大全耐高温镍基合金是一种特种耐热材料，被广泛应用于高温工作环境中，如石油化工、航空航天等领域。
本文将为您介绍一些主要的耐高温镍基合金型号。
1. Inconel 600（UNS N06600）Inconel 600具有优异的耐腐蚀性和高温性能，常用于高温环境下的极端应用。
其使用温度范围为-200℃至+1093℃。
常见应用领域：石油化工、航空航天、核工业、医疗器械等。
2. Inconel 601（UNS N06601）Inconel 601是一种含铝、铬和镍的合金，具有良好的耐腐蚀性和高温性能。
其使用温度范围为-200℃至+1150℃。
常见应用领域：化工、电力、高温炉、炼钢等。
3. Inconel 625（UNS N06625）Inconel 625具有极好的耐腐蚀性和高温性能，尤其是对海水中的腐蚀具有良好的抵抗能力。
其使用温度范围为-196℃至+1093℃。
常见应用领域：船舶建造、石油化工、核电站等。
4. Incoloy 800（UNS N08800）Incoloy 800是一种镍铁铬合金，具有优异的高温强度和耐腐蚀性。
其使用温度范围为-20℃至+1100℃。
常见应用领域：加热炉、化工设备、石油加工等。
5. Incoloy 825（UNS N08825）Incoloy 825是一种含铬、镍和钼的合金，具有良好的耐腐蚀性和高温性能，尤其是对硫酸、磷酸和盐水的腐蚀具有优异的抵抗能力。
其使用温度范围为-20℃至+540℃。
常见应用领域：石油化工、海洋工程、化工设备等。
6. Hastelloy C-276（UNS N10276）Hastelloy C-276是一种镍钼铬铁合金，具有极好的耐腐蚀性和高温强度。
其使用温度范围为-196℃至+870℃。
常见应用领域：化工、石油天然气、食品加工等。
7. Monel 400（UNS N04400）Monel 400是一种铜镍合金，具有良好的耐腐蚀性和高温性能，尤其是对盐水和氯化物的腐蚀具有优异的抵抗能力。
ateq f620 快速入门指南说明书
Quick Start Guide2 /02Table of contents Safety advisory / WarrantyGood practices and safety instructionsAir quality requirementsPreambleATEQ F620, a universal leak testerLeak testPrinciple of a cycleYour ATEQ F620Front panelConnectors on the back panel (with all options) Power supply connectorsDigital linksAnalog outputsDigital inputs/outputsPneumatic connectorsPneumatics configurationUser interfaceOverviewKeysDisplayStarting upPower upPreparing a programModifying a parameterSelecting a programStarting and stopping current cycleUser adjustmentsOptions of the menus SpecificationsCharacteristicsQSG_F620.283.00_EN_01 / 2019-02-20QSG_F620.283.00_EN_01 / 2019-02-203 /46ATEQ Manufacturer Plants - Measurement Solution, Global Leader.We continuously work on improving our products. This is why information contained in this manual, the device and the technical specifications may be modified without prior notification.Pictures and figures in this manual are non-contractual.Safety advisory / Warranty4 /46Safety recommendationsIf the device is supplied with 100 / 240 V AC, it is mandatory to connect it to the ground witha good link to the ground, to protect against electric hazard or electrocution.It is dangerous to change the status of the outputs.They can control power actuators or other equipment (mechanical, pneumatic, hydraulic,electrical or other) which can cause serious personal injury and damage to surrounding material.For safety and quality measurement reasons, it is important, before powering on the device,to ensure that it is air supplied with a minimum operating pressure (0.6 MPa (87 PSI) ± 15%).Recommendations for the test environmentKeep the test area as clean as possible.Recommendations for operatorsATEQ recommends that the operators who use the devices have training and a level ofqualification that correspond to the job to perform.General recommendations—Read the user manual before using the device.—All electrical connections to the device must be equipped with safety systems (fuses, circuit breakers, etc.) adapted to the needs and in accordance with the applicablestandards and rules.—To avoid electromagnetic interference, electrical connections to the device must be shorter than 2 meters.—Power supply plug must be grounded.—Disconnect the device from the mains before performing any maintenance work.—Shut off the compressed air supply when working on the pneumatic assembly.—Do not open a connected device.—Avoid splashing water on the device.ATEQ is at your disposal for any information concerning the use of the device undermaximum safety conditions.We draw your attention to the fact that ATEQ cannot be held responsible for anyaccident related to a misuse of the measuring instrument, the workstation or non-compliance of the installation with safety rules.In addition, ATEQ declines any responsibility for the calibration or the fitting of theirinstruments that is not done by ATEQ.ATEQ also declines any responsibility for any modification (program, mechanical orelectrical) of the device done without their written consent.QSG_F620.283.00_EN_01 / 2019-02-20QSG_F620.283.00_EN_01 / 2019-02-205 / 46The air supplied into the device must be clean and dry. Even though the device is provided with a filter, the presence of dust, oil or impurities may cause malfunction.Air quality requirements according to ISO standard 8573The air must be clean and dry.The presence of impurities, oil or humidity in the air may cause deterioration which will not be covered by the warranty.When the instrument is working in vacuum conditions, impurities must be prevented from being drawn into its internal components.For this purpose we strongly recommend that a suitable airtight filter is installed between the part under test and the instrument.ATEQ recommends the following characteristics for the air supplied into the device.Recommended additional equipmentATEQ recommends the installation of this additional equipment: —Air dryer to provide dry air at less than - 40°C dew point —25 micron and 1/100 micron double filter.Preamble6 /46ATEQ F620 is a leak detector that tests the airtightness of parts.ATEQ F620 can memorise 128 different test programs.QSG_F620.283.00_EN_01 / 2019-02-20QSG_F620.283.00_EN_01 / 2019-02-207 / 46Direct measurement principleThe part under test 3 and the reference part 5 are filled to an identical pressure.A differential sensor 4 measures the pressure variation between the part under test 3 and the reference part 5. In some applications, the reference part can be replaced by a cap.1 Device2 Pressure sensor3 Part under test4 Differential pressure sensor5 Reference partDesensitized testThis mode is used for the measurement of large leaks, when the reject level required isabove the full scale of the differential sensor.The test pressure is applied to the input of the test part 3.The measurement is performed by the pressure sensor 2.1 Device2 Pressure sensor3 Part under test4 Cap on the reference connectorOther types of test are available in option (Burst test, Volume, Operator...).The measurement cycle is made of 4 main phases: fill, stabilization, test, dumping.8 /460Waiting phase1Fill phase2Stabilization phase3 Test4 DumpingQSG_F620.283.00_EN_01 / 2019-02-20Your ATEQ F6209 /46 The user interface is located on the front panel.1 Display2Cycle keys3Navigation keys4USB connectors5Quick connector6Mechanical RegulatorFor more information, refer to User interfaceQSG_F620.283.00_EN_01 / 2019-02-2010 /46QSG_F620.283.00_EN_01 / 2019-02-2011 /46 * These connectors are not operational. They are provided for future development of ourdevices.12 /46The device can be connected to an external power supply (24 V DC - 2 A) or provided with an internal power supply (100 / 240 V AC) (option).External supply24 V DC connector (J7)The device can be connected to a 24 V DC - 2 A power supply through a M12 4 pins type connector.24 V DC on the relay board connector (J11) (option)The device can also be connected to a 24 V DC - 2 A power supply through J11 connector on the relay board.Apply 24 V DC to the pin 2 or 4.13 /46Internal supply only100 / 240 V AC connector (J7) (option)The device can be connected to a 100 / 240 V AC power supply (option).This connector has a ON/OFF button.It is mandatory to connect the device to the ground with a good link to the ground, to protectagainst electric hazard or electrocution.1 ON 0 OFF14 /46PC USB connectors (on front face)USB connectors can be used for connecting miscellaneous compatible USB devices.The USB connectors are located under the rubber cover 1 (see figure).1Rubber cover2USB connector to PC3USB connector to USB keyDo not connect two USB devices at the same time.Do not use a cable longer than 2 m.Push the rubber cover 1 slightly forward for an easy access to USB connectors 2 and 3.Only use this connection for temporary communication. Connection to a PC cannot be usedpermanently because the communication can be disconnected by the PC.Printer RS232 connector / Modbus (option) or Profibus (option)(J12)RS232 - SubD 9 pins male connector (printer)RS232 for printer, bar code reader, PC connection.15 / 46RS232 - SubD 9 pins female connector (Profibus) optionProfibus: SubD 9 pins female connector.Devicenet connectors (J5) (J6) (option)M12 type connector - 5 pins male connector (J5) (Devicenet input)For connection to others ATEQ devices.M12 type connector - 5 pins female connector (J6) (Devicenet output)For connection to others ATEQ devices.Profinet connectors (J5 + J6) (option)M12 D coded type connector - 4 pins female connector (J5 + J6)16 /46Standard connection Ethernet TCP / IP protocol.—Ethernet IP—Profinet—Ethercat (J5 = Input J6 = Output).M12 type connector - 8 pins female connector (J1)17 /4618 /46The 24V DC power supply for the digital inputs can be provided by 2 means:—The internal power supply of the device (0.3A max)—An external power supply provided by the customer.Inputs default mode is PNP. NPN mode is available on request.Relay board connector (J11) (option)Characteristics—Inputs• Activation: + 24 V DC.—Outputs• Dry contacts• 60 V AC / DC max - 200 mA max.19 /46The device can be energized through the J11 connector of the relay board (except if internal supply option):0 V to the pin 1624 V DC to the pin 2 or 4.Program selection extension connector (J10) (option)The J10 connector is an extension of the J11 connector that enables the selection of 128 programs.Characteristics—Inputs•Activation: + 24 V DC.20 /46Program selection (J11 and J10)The connectors J11 and J10 (option) enable you to select a program from digital inputs.Combinations of connector pins to activate for program selection* X is equal to 0 or 1 in function of the program number.21 /46Valve codes and auxiliary outputs board connector (J9) (option)Characteristics—Outputs:• 24 V DC - 100 mA max per output. —Inputs:•Activation: + 24 V DC.22 /46Pneumatic connectors used to connect the part under test are located on the back panel of the device.Pneumatic supplyThe pneumatic supply has to meet specific requirements recommended by ATEQ. Refer to Good practices and safety instructions section.A specific filter may be necessary.The air is supplied via the filter located on the back panel of the device.Metal air filterThe metal filter is used for 1 MPa(145 PSI) range.The maximum pressure admissible is1.2 MPa (174 PSI).Plastic air filterThe plastic filter is used for 0.5 MPa(72.5 PSI) range (direct and indirectmodes) or 2 MPa (290 PSI) range (forpilot valves input).The maximum pressure admissible is690 kPa (100 PSI).23 /46Quick connector (on front face) (option)Use this function to check the calibration.As this connector is part of the measurement circuit, all its connections must be air tight.Test and reference outputsThe outputs enables parts to be connected (test and reference)1 Test connector2 Reference connector3 Not used4 Exhaust output5 Pressurization outputMetallic fitting available for test (1) and reference (2) connectors: —2.7/4 mm —3/5 mm —4/6 mm —6/8 mmDifferential sealed part connectors (option) (V1 and V2)External volume (closed tube) connection.Metallic fitting available for V1 and V2 connectors: —2.7/4 mm24 /46Other inputs / outputsThe outputs enables parts to be connected (test and reference)1Pilot pressure input or test pressureinput (according configuration)2Test pressure output (indirect mode)(from 0.5 to 2 MPa (72.5 to 290 PSI)according configuration)3Pneumatic input or output (accordingconfiguration)4Exhaust output (indirect mode)Pneumatic output 0.6 MPa (87 PSI) (option)A and B: automatic connectors option. Theseconnectors are used to drive pneumaticcaps on the part under test.Air supply input for optionsInstant fitting: 6 mm diameter—Vacuum input for vacuum range—External regulated pressure (accordingconfiguration)Calibration check by volume variation connector (option) (V)External volume (closed tube) connection.25 /46 Direct mode - Low rangePressure: from 0 to 500 kPa (72.5 PSI)ConnectionsDirect mode - Medium rangeMaximum pressure: 1 MPa (145 PSI)26 /46ConnectionsDirect mode - High rangeMaximum pressure: 2 MPa (290 PSI)27 /46ConnectionsIndirect modeMaximum pressure: 1 MPa (145 PSI)28 /46Connections29 /46Direct mode - Sealed part testPressure: from 0 to 500 kPa (72.5 PSI)This configuration can be used for test of small test part volumes.Protect volumes and pipes from air blowing and temperature variations.ConnectionsDirect mode - Sealed part differential volume testPressure: from 0 to 500 kPa (72.5 PSI)30 /46ConnectionsDirect mode - Option test check by pressure dropPressure: from 0 to 500 kPa (72.5 PSI)31 /46ConnectionsUser interface32 /46The user interface comprises a display and user keys located on the front panel.1 Display2Cycle keys3Navigation keysKEYSCycle keysThe cycle keys are used to start and to stop a measurement cycle.33 /46Navigation keysThe navigation keys are used to select menus/options and change parameter values.Smart keySmart key is a programmable key that provides direct access to a function selected bythe user.This key is programmable through the MAIN MENU screen:MAIN MENU > CONFIGURATION > MISCELLANEOUS > SMART KEYDISPLAYThe device uses 4 main screens.The Program screenUse the Program screen to select a test program.1Current program name (here NAME )2 Current program number (here 001)3 Test type (here LEAK TEST )Access at start-up of the instrument or by pressing several times Esc .34 /46The Measurement cycle screenThe Measurement cycle screen displays the different values of the current test (or last one).1Test pressure measurement2Test result or step phase3Test reject value4Vertical line test result5Remaining time of the current phaseor ready status6Leak measurement7Measurement unit8Current program9Vertical line test resultA star (*) can be displayed after the measurement unit 7 when the standard conditions function is validated.Refer to the Reference Manual.The MAIN MENU screenThe MAIN MENU screen gives access to different sections for managing the device and the test parameters.Access: from the Program screen, press .MAIN MENUSPE CYCLEPARAMETERSCONFIGURATIONSERVICERESUL TSUSB35 / 46Starting up1. Make sure that all the necessary connections are in place.Electrical: such as power supply, inputs/outputs Pneumatic: including line pressure supply2. Power up your device.When power-up is completed, the Program screen is displayed with last program used on screen.Use this procedure to configure a new test program.On the MAIN MENU screen:ACCESSING THE PARAMETERS1.Select PARAMETERSusing the up/downkeys and press .MAIN MENUPARAMETERS CONFIGURATIONSERVICE RESUL The program list is displayed.SELECTING A PROGRAM NUMBER 2. Select the program to configure and press.A list of the available measurement types is displayed: —LEAK TEST type—BLOCKAGE type (option)—DESENSITIZED TEST type (option) —OPERATOR type (option) —BURST TEST type (option) —VOLUME type (option)36 /46CONFIGURING THE ASSOCIATED MEASUREMENTS3.Select a measurement type and press .The parameters of the selected measurement type aredisplayed.4. Define the measurement cycle parameters.See: Modifying a parameter.Use this procedure to complete the test program setup.The protection of the parameters is configurable. If the icon is displayed at the bottom of the screen, you must insert the USB unlocking device or enter a password before modifying a parameter.On the PARAMETERS screen of the program (see: Preparing a program):1. Press up/down to select the parameter tomodify, and press.An arrow is displayed on the right of the parameterbeing modified.2. Use the up/down up/down keysto modify the parameter value, and press tovalidate.The arrowreturns to the left of the modified parameter.3. Repeat these steps until all parameters are set.4. To return to the MAIN MENU screen, press Escas many times as necessary.37 / 46If necessary, you can select another program.1. Pressup/down.Use the front panel keys to start/stop a measurement cycle.With the desired program displayed on the Program screen:STARTING A MEASUREMENT CYCLE 1. Press Start.The cycle phases of the program are successively displayed:FILLSTABILISATION TEST DUMPAt the end of the cycle, the results are displayed and READY appears at the bottom right of the screen.During the measurement cycle, you may press to access the MAIN MENU screen and set parameters for a next measurement cycle.STOPPING A CYCLE2. Press Reset to immediately stop the current measurement cycle and return to the Program screen.User adjustments38 /46Different menus are accessible on the MAIN MENU screen.For more information, refer to the Reference Manual.SPE CYCLE menuUse this menu to carry out specific procedures necessary to ensure the proper operationof specific measurement cycles (for example, adjustment of pressure regulator).Some parameters are displayed when specific functions are activated.39 /46TO START SPECIAL CYCLES...1. On the SPECIAL CYCLE MENU screen, select acycle, and press to validate.2. PressStart to start the cycle.3. To stop the current cycle pressReset .PARAMETERS menuUse this menu to configure the measurement cycle associated to each test program.Default parameters of the LEAKtype testsSome parameters are displayed when specific functions are activated.40 /46Additional functions41 /46Some functions are available depending on software version.42 /46CONFIGURATION menuUse this menu to configure your ATEQdevice.Start on the instrument frontpanel. Programs can only be started from the instrumentConfiguration of the assigned function to theSmart key43 /46SERVICE menuUse this menu to do the maintenance of your device (status check, internal tests...).RESULTS menuIn this section, manage measurements results.44 /46USB menuThis section describes save and restore parameters on an external USB device.Specifications45 /46 Technical characteristics of the device.Main characteristics46 /46。
Belimo EV..F+BAC 电子调节阀数据表说明书
EV..F+BACCharacterised control valve with sensor-operated flow rate or power control, power andenergy-monitoring function, 2-way, Flange, PN 16 (Energy Valve)• Nominal voltage AC/DC 24 V• Control modulating, communicative, hybrid, Cloud• For closed cold and warm water systems • For modulating control of air-handling and heating systems on the water side• Ethernet 10/100 Mbit/s, TCP/IP, integrated web server• Communication via BACnet, Modbus, Belimo MP-Bus or conventional control • optional Belimo Cloud connection • Glycol monitoringType OverviewType DN V'nom [l/s]V'nom [l/min]V'nom [m³/h]kvs theor. [m³/h]PN EV065F+BAC 65848028.85016EV080F+BAC 801166039.67516EV100F+BAC 1002012007212716EV125F+BAC 125311860111.619516EV150F+BAC15045270016225416kvs theor.: Theoretical kvs value for pressure drop calculationTechnical dataElectrical dataNominal voltageAC/DC 24 V Nominal voltage frequency 50/60 HzNominal voltage rangeAC 19.2...28.8 V / DC 21.6...28.8 V Power consumption in operation 7 W Power consumption in rest position 5 WPower consumption for wire sizing 6 VA (DN 65, 80)11 VA (DN 100, 125, 150)Connection supply / control Cable 1 m, 6x 0.75 mm²Connection Ethernet RJ45 socketParallel operationYes (note the performance data)Data bus communicationCommunicative controlBACnet/IP, BACnet MS/TP Modbus TCP, Modbus RTU MP-Bus CloudNumber of nodesBACnet / Modbus see interface description MP-Bus max. 8Functional data Operating range Y 2...10 V Input impedance100 kΩOperating range Y variable 0.5...10 V Position feedback U 2...10 V Position feedback U note Max. 1 mA Position feedback U variable 0...10 V 0.5...10 V Sound power level Motor45 dB(A)EV..F+BACFunctional data V'max adjustable30...100% of V'nomControl accuracy±5% (of 25...100% V'nom) @ 20°C / Glycol 0%vol.Control accuracy note±10% (of 25...100% V'nom) @ -10...120°C /Glycol 0...50% vol.Min. controllable flow1% of V'nomParametrisation via integrated web server / ZTH EUFluid Cold and warm water, water with glycol up tomax. 50% vol.Fluid temperature-10...120°C [14...248°F]Close-off pressure ∆ps690 kPaDifferential pressure Δpmax340kPaFlow characteristic equal percentage, optimised in the openingrange (switchable to linear)Leakage rate air-bubble tight, leakage rate A (EN 12266-1)Pipe connection Flangeaccording to EN 1092-2Installation orientation upright to horizontal (in relation to the stem)Servicing maintenance-freeManual override with push-button, can be locked Temperature measurement Measuring accuracy absolute temperature± 0.35°C @ 10°C (Pt1000 EN60751 Class B)± 0.6°C @ 60°C (Pt1000 EN60751 Class B)Measuring accuracy temperature difference±0.18 K @ ΔT = 10 K±0.23 K @ ΔT = 20 KResolution0.05°CFlow measurement Measuring principle Ultrasonic volumetric flow measurementMeasuring accuracy flow±2% (of 25...100% V'nom) @ 20°C / glycol 0%vol.Measuring accuracy flow note±6% (of 25...100% V'nom) @ -10...120°C /glycol 0...50% vol.Min. flow measurement0.5% of V'nomGlycol monitoring Measurement display glycol0...40% or >40%Measuring accuracy glycolmonitoring±4% (0...40%)Safety data Protection class IEC/EN III, Protective Extra-Low Voltage (PELV)Degree of protection IEC/EN IP40IP54 when using protective cap or protectivegrommet for RJ45 socketPressure equipment directive CE according to 2014/68/EUEMC CE according to 2014/30/EUType of action Type 1Rated impulse voltage supply / control0.8 kVPollution degree3Ambient humidity Max. 95% RH, non-condensingAmbient temperature-30...50°C [-22...122°F]Storage temperature-40...80°C [-40...176°F]Materials Valve body EN-GJL-250 (GG 25)Flow measuring pipe EN-GJL-250 (GG 25), with protective paintClosing element Stainless steel AISI 316EV..F+BACMaterialsSpindle Stainless steel AISI 304Spindle seal EPDMSeatPTFE, O-ring Viton Immersion sleeveStainless steel AISI 316Technical data••••Safety notesThis device has been designed for use in stationary heating, ventilation and air-conditioning systems and must not be used outside the specified field of application, especially in aircraft or in any other airborne means of transport.Outdoor application: only possible in case that no (sea) water, snow, ice, insolation or aggressive gases interfere directly with the device and that it is ensured that the ambient conditions remain within the thresholds according to the data sheet at any time.Only authorised specialists may carry out installation. All applicable legal or institutional installation regulations must be complied with during installation.The device contains electrical and electronic components and must not be disposed of as household refuse. All locally valid regulations and requirements must be observed.Product featuresOperating modeThe HVAC performance device is comprised of four components: characterised control valve (CCV), measuring pipe with flow sensor, temperature sensors and the actuator itself. The adjusted maximum flow (V'max) is assigned to the maximum control signal DDC (typically 10 V / 100%). Alternatively, the control signal DDC can be assigned to the valve opening angle or to the power required on the heat exchanger (see power control). The HVAC performance device can be controlled via communicative or analogue signals. The fluid is detected by the sensor in the measuring pipe and is applied as the flow value. The measured value is balanced with the setpoint. The actuator corrects the deviation by changing the valve position. The angle of rotation α varies according to the differential pressure through the control element (see flow curves).Flow rate curvesTransmission behaviour HE Heat exchanger transmission behaviourDepending on the construction, temperature spread, fluid characteristics and hydronic circuit,the power Q is not proportional to the water volumetric flow V' (Curve 1). With the classicaltype of temperature control, an attempt is made to maintain the control signal Y proportionalto the power Q (Curve 2). This is achieved by means of an equal-percentage flow characteristic(Curve 3).Power control Alternatively, the control signal DDC can be assigned to the output power required at the heat exchanger.Depending on the water temperature and air conditions, the Energy Valve ensures theamount of water V' required to achieve the desired power.Maximum controllable power on heat exchanger in power control mode:Control characteristics The specially configured control parameters in connection with the precise velocity sensorensure a stable quality of control. They are, however, not suitable for rapid control processes,i.e. for domestic water control.Power controlQ'nom is the maximum possible power output on the heat exchanger.Q'max is the maximum power output on the heat exchanger which has been set with thehighest control signal DDC. Q'max can be set between 1% and 100% of Q'nom.Q'min 0% (non-variable).Flow controlV'nom is the maximum possible flow.V'max is the maximum flow rate which has been set with the highest control signal. V'max canbe set between 30% and 100% of V'nom.Creep flow suppression Given the very low flow speed in the opening point, this can no longer be measured by the sensor within the required tolerance. This range is overridden electronically.Opening valveThe valve remains closed until the flow required by the control signal DDC corresponds to 1%of V'nom. The control along the flow characteristic is active after this value has beenexceeded.Closing valveThe control along the flow characteristic is active up to the required flow rate of 1% of V'nom.Once the level falls below this value, the flow rate is maintained at 1% of V'nom. If the levelfalls below the flow rate of 0.5% of V'nom required by the control signal DDC, then the valvewill close.Configurable actuators The factory settings cover the most common applications. Single parameters can be modified with the Belimo service tools MFT-P or ZTH EU.CommunicationThe parametrisation can be carried out through the integrated web server (RJ45 connection to the web browser) or by communicative means.Additional information regarding the integrated web server can be found in the separate documentation."Peer to Peer" connectionhttp://belimo.local:8080The Notebook must be set to "DHCP".Make sure that only one network connectionis active.Standard IP address:http://192.168.0.10:8080Static IP addressPassword (read-only):User name: «guest»Password: «guest»Control signal inversionThis can be inverted in cases of control with an analogue control signal DDC. The inversion causes the reversal of the standard behaviour, i.e. at a control signal DDC of 0%, regulation is to V'max or Q'max, and the valve is closed at a control signal DDC of 100%.Hydronic balancingVia the integrated web server, the maximum flow rate (equivalent to 100% requirement) can be adjusted on the device itself, simply and reliably, in a few steps. If the device is integrated in the management system, then the balancing can be handled directly by the management system.Delta-T managerIf a heating or cooling register is operated with a differential temperature that is too low and thus with a flow rate that is too high, this will not result in an increased power output.Nevertheless, heating or cooling machines must provide the energy at a lower degree of efficiency. This means, that pumps circulate too much water and increase energy consumption unnecessarily.With the aid of the Energy Valve, it is simple to discover that operation is being carried out at a differential temperature that is too low, resulting in the inefficient use of energy.Necessary setting adjustments can now be carried out quickly and easily at any time. The integrated differential temperature limiting offers the user the possibility of defining a low limit value. The Energy Valve limits the flow rate automatically to prevent the level from falling below this value.The settings of the Delta-T manager can be made either directly on the web server or via the Belimo Cloud a direct analysis of the Delta-T behavior is carried out by Belimo experts.Power output of the heating or coolingregisters 1Diff. temperature between supply and return2Loss zone (heating or cooling registersaturation) 3Adjustable minimum differential temperature4Combination analogue - communicative(hybrid mode)With conventional control by means of an analogue control signal DDC, the integrated web server, BACnet, Modbus or MP-Bus can be used for the communicative position feedback.EV..F+BACPower and energy monitoring functionThe HVAC performance device is equipped with two temperature sensors. One sensor (T2) is integrated in the measuring pipe, the second sensor (T1) is included with the system,prewired, and must be installed in the water circuit on site. The sensors are used to record the fluid temperature of the supply and return lines of the consumer (heating/cooling coil). As the water quantity is also known, thanks to the flow measurement integrated in the system, the power released from the consumer can be calculated. Furthermore, the heating/cooling energy is also determined automatically by means of the evaluation of the power over time.The current data, e.g. temperatures, volumetric flow volumes, exchanger energyconsumption etc. can be recorded and accessed at any time by means of web browsers or communication.Data recordingThe recorded data (integrated data recording for 13 months) can be used for the optimisation of the overall system and for the determination of the performance of the consumer (heating/cooling coil).Download csv files through web browser.Belimo CloudAdditional services are available if the Energy Valve is connected to the Belimo Cloud: forinstance, several devices may be managed via Internet. Also, Belimo experts may help analyse the delta-T behaviour or provide written reports about the Energy Valve performance. Under certain conditions, the product warranty according to the applicable Terms and Conditions of Sale may be prolonged. The "Terms of Use for Belimo Cloud Services" in their currently valid version apply to the use of Belimo Cloud services. Further details may be found under [/ext-warranty]Glycol monitoring Glycol monitoring measures the actual glycol content, which is necessary for safe operation and optimised heat exchange.Manual override Manual override with push-button possible (the gear train is disengaged for as long as the button is pressed or remains locked).High functional safetyThe actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached.Product featuresAccessoriesElectrical accessoriesDescriptionType Grommet for RJ connection module, Multipack 50 pcs.Z-STRJ.1Stem heater flange F05 (30 W)ZR24-F05ToolsDescriptionTypeService tool, with ZIP-USB function, for parametrisable and communicative Belimo actuators, VAV controller and HVAC performance devicesZTH EU Connecting cable 5 m, A: RJ11 6/4 ZTH EU, B: 6-pin for connection to service socketZK1-GENElectrical installationSupply from isolating transformer.Parallel connection of other actuators possible. Observe the performance data.The wiring of the line for BACnet MS/TP / Modbus RTU is to be carried out in accordance with applicable RS-485 regulations.Modbus / BACnet: Supply and communication are not galvanically isolated. Connect earth signal of the devices with one another.EV..F+BACWire colours:1 = black 2 = red 3 = white 5 = orange 6 = pink 7 = greyFunctions:C1 = D- = A (wire 6)C2 = D+ = B (wire 7)Connection of a notebook for parametrisation and manual control via RJ45.Optional connection via RJ45 (direct connection Notebook / connection via Intranet or Internet) for access to the integrated web serverBACnet IP / Modbus TCPMP-Bus, supply via 3-wire connectionA) additional MP-Bus nodes (max. 8)MP-Bus via 2-wire connection, local power supplyA) additional MP-Bus nodes (max. 8)Electrical installationFunctionsFunctions when operated on MP-BusMP-Bus Network topologyThere are no restrictions for the network topology (star, ring, tree or mixed forms are permitted).Supply and communication in one and the same 3-wire cable • no shielding or twisting necessary• no terminating resistors requiredEV..F+BAC Functions with specific parameters (parametrisation necessary)BACnet MS/TP / Modbus RTU with analogue setpoint (hybrid mode)MP-Bus, supply via 3-wireconnectionMP-Bus with analog setpoint (hybrid mode)BACnet MS/TP / Modbus RTU with analog setpoint (hybrid mode)BACnet IP / Modbus TCP with analog setpoint (hybrid mode)MP-Bus via 2-wire connection, local power supplyMax. 8 additional MP-Bus nodesEV..F+BACFunctions with specific parameters (parametrisation necessary)Override control and limiting with DC 24 V with relay contacts (with conventional control or hybrid mode)1) Position control 2) Flow control 3) Power controlFunctionsOperating controls and indicators2LED display green Off:No power supply or wiring error On:In operationFlickering:Internal communication (Valve/Sensor)3Push-button and LED display yellow On:Adaptation or synchronisation process activePress button:Triggers angle of rotation adaptation, followed by standard mode4Manual override button Press button:Gear train disengages, motor stops, manual override possible Release button:Gear train engages, standard mode5Service plugFor connecting parametrisation and service toolsInstallation notesPermissible installation orientationThe ball valve can be installed upright to horizontal. The ball valve may not be installed in ahanging position, i.e. with the spindle pointing downwards.Installation location in return Installation in the return is recommended.Water quality requirementsThe water quality requirements specified in VDI 2035 must be adhered to.Belimo valves are regulating devices. For the valves to function correctly in the long term, they must be kept free from particle debris (e.g. welding beads during installation work). The installation of a suitable strainer is recommended.EV..F+BAC Spindle heater In cold water applications and warm humid ambient air, condensation can be caused in the actuators. This can lead to corrosion in the gear train of the actuator and a breakdown of theactuator. In such applications, the use of a spindle heater is recommended.The spindle heater must only be activated when the system is in operation because it does nothave a temperature controller.Servicing Ball valves, rotary actuators and sensors are maintenance-free.Before any service work on the control element is carried out, it is essential to isolate therotary actuator from the power supply (by unplugging the electrical cable if necessary). Anypumps in the part of the piping system concerned must also be switched off and theappropriate slide valves closed (allow all components to cool down first if necessary andalways reduce the system pressure to ambient pressure level).The system must not be returned to service until the ball valve and the rotary actuator havebeen correctly reassembled in accordance with the instructions and the pipeline has beenrefilled by professionally trained personnel.Flow direction The direction of flow, specified by an arrow on the housing, is to be complied with, since otherwise the flow rate will be measured incorrectly.Inlet section In order to achieve the specified measuring accuracy, a flow-calming section or inflow section in the direction of the flow is to be provided upstream from the flow sensor. Its dimensionsshould be at least 5x DN.EV..F+BACMounting of immersion sleeve andtemperature sensor The valve is equipped with two temperature sensors:• T2: One sensor is already installed in the valve unit.• T1: The second sensor must be mounted at the installation site ahead of the consumer (valvein the return line; recommended) or after the consumer (valve in the supply line). Theimmersion sleeve required is supplied with the valve unit.The temperature sensor is already wired with the valve.NoteThe cable between valve unit and temperature sensor may not be either shortened orlengthened.Split installation The valve-actuator combination may be mounted separately from the flow sensor. The direction of flow of both components must be observed.Installation notesGeneral notesMinimum differential pressure (pressuredrop)The minimum required differential pressure (pressure drop through the valve) for achieving the desired volumetric flow V'max can be calculated with the aid of the theoretical kvs value(see type overview) and the below-mentioned formula. The calculated value is dependent onthe required maximum volumetric flow V'max. Higher differential pressures are compensated for automatically by the valve.FormulaExample (DN 100 with the desired maximum flow rate = 50% V'nom)Behaviour in case of sensor failure In case of a flow sensor error, the Energy Valve will switch from either power or flow controlto position control (Delta-T manger will be deactivated).Once the error disappears, the Energy Valve will switch back to the normal control setting(Delta-T manager activated)EV..F+BACDimensionsDimensional drawingsIf Y <180 mm, the extension of the hand crank must be demounted as necessary.Further documentation• Tool connections• BACnet Interface description• Modbus Interface description• Description Data-Pool Values• Overview MP Cooperation Partners• MP Glossary• Introduction to MP-Bus Technology• General notes for project planning• Instruction Webserver。
ESC60HRAF资料
.125 [3.18] .140 [3.56] ROW SPACING EYELET ACCEPTS 3-#26 AWG .185 [4.70] .050 [1.27] .275 [6.98] .225 [5.72] LETTER B SIDE FITS .043 [1.09] .200 [5.08] (RT) .440 [11.15] (RY) .156 [3.96] .140 [3.56] FITS .043 [1.09] FITS .043 [1.09] .200 [5.08] .185 [4.70]
.265 INSERTION DEPTH [6.73] B A F D E REFER TO MOUNTING STYLE .025 [0.64] .100 TYP. [2.54]
INCHES C D +.015 +.010 _ _ 0.675 0.975 0.775 1.075 0.875 1.175 0.975 1.275 1.075 1.375 1.275 1.575 1.475 1.775 1.575 1.875 1.775 2.075 1.975 2.275 2.075 2.375 2.175 2.475 2.275 2.575 2.475 2.775 2.575 2.875 2.775 3.075 2.875 3.175 3.075 3.375 3.275 3.575 3.375 3.675 3.775 4.075 3.875 4.175 4.275 4.575 4.575 4.875 4.675 4.975 5.175 5.475 5.275 5.575 5.475 5.775 6.275 6.575
.200 [5.08]
ETA-K3
KEY REPLACES ONE PAIR OF CONTACTS (ORDER SEPARATELY)
FF20型号的选择指南说明书
Electrode Cables All Necessary Cables; 2 Meter in Length All Necessary Cables; 5 Meter in Length All Necessary Cables; 10 Meter in Length
Electrodes Shock-proof Measuring Glass electrode; 0 - 100°C
Gel Filled Reference; PTFE Junction; 0 - 80°C ORP Electrode; PLATINUM; 0 - 130°C
Gel Filled Reference; PTFE Junction; 0 - 80°C ORP Electrode; GOLD; 0 - 130°C
SM29-PT9 SM21-AG4
SM21-AL6 SM23-AN4
SM29-PT9 SM23-AN4
SC29-PTG29 SM23-AN4
S115746 SR20-AC32 FP20-S13
S115746A SR20-AC32 FP20-S13
S11547B SR20-AC32 FP20-S13
SM60-T1 N/A
ECP Measuring Electrode - (Admirality Brass) BELLOMATIC Liquid Filled Ceramic Reference; 0 - 120°C Mounting Kit for BELLOMATIC
ASCO电磁阀产品说明
"ia" "i"
"ib"
指火花或温度都不能点燃爆炸性环境的电路, 这些火花 或温度是标准规则指定的保养条件下产生的 (正常和非 正常运行条件下).
指元件装在一种特殊包装内的电气设备，火花或加热元
"m"
件都不能点燃爆炸性环境。
"o"
指浸在油里的电气设备.
"p"
通过中性惰性气体来增压的环境.
"q"
指粉末填充的包装.
Zone 20
Zone 22 : Accidentally present (shorttime-service- never in regular service) < 10 hours/year
电气防爆基础
温度等级
I组
温度 < 150°C or < 450°C 根据设备上积聚的煤矿粉尘
II 组
425°C 429°C - 440°C
305°C 102°C 560°C
防护类型
防护
区域
代号 0 20 1 21 2
22
"d"
描述
指爆炸性元件封装在防爆包装内的电气设备. 这种包装 抵得住爆炸性混合物爆炸时的内部压力，而且能防止爆 炸渗透周围的爆炸性环境.
标志性 图案
"e"
指安全系数高的电气设备. 这种设备免于极端的高温, 在 正常运行条件下不会产生内部和外部电弧、火花.
n-butane n-butyl alcool cyclo hexanon 1,2-dichloro-
ethan acetic acid anhydride
高流筛选器F602系列产品目录说明书
Catalog 0730-2Hi-Flow F602 SeriesHi-Flow Filters1-1/4 & 1-1/2 Inch PortsAutomaticDrainManual DrainFeatures• Excellent water removal efficiency • For heavy duty applications with minimum pressure drop requirement • Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt separation • Large filter element surface guarantees low pressure drop and increased element life• 40 micron filter element standard, 5 micron available• Metal bowl with sight gauge standard • Twist drain as standard, optional auto drain• Large bowl capacity• Optional high capacity bowl(s) available • High flow: 1-1/4" – 390 SCFM §1-1/2" – 450 SCFM §Drains and Options Blank Manual Twist Drain Q External Heavy Duty Auto Drain R Internal Auto DrainOrdering InformationF 602 — 10 W J /**BowlE 32 oz. Large Capacity Metal without Sight GaugeW 16 oz. Metal with Sight GaugeElement G 5 Micron J 40 MicronPort Size 10 1-1/4 Inch 12 1-1/2 InchPort Threads — NPT G BSPPEngineeringLevel * Will be Entered at Factory.Standard part numbers shown bold.For other models refer to ordering information below.§ SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop.PortSize NPTTwist DrainAutomatic Pulse DrainMetal Bowl / Sight Gauge - 16 oz.1-1/4"F602-10WJ F602-10WJR 1-1/2"F602-12WJ F602-12WJR Metal Bowl without Sight Gauge - 32 oz.1-1/4"F602-10EJ F602-10EJR 1-1/2"F602-12EJF602-12EJRF602 Filter Dimensions A B C D E F F602-10W, F602-12W4.90 (124)8.18 (208)9.46 (240)5.19 (132) 1.28 (32.4) 2.45 (62.2)F602-10E, F602-12E4.90 (124)11.41 (290)12.69 (322)5.19 (132)1.28 (32.4)2.45 (62.2)inches (mm)BOLD ITEMS ARE MOST POPULAR.Catalog 0730-2Technical Specifications – F602F602 Series, 1-1/4 & 1-1/2 Inch Ports Hi-Flow Filters50100150200250300350400500450102345Flow - SCFMP r e s s u r e D r o p - P S I GP r e s s u r e D r o p - b a r.1.2.3Primary Pressure - PSIG 251005075150Primary Pressure - bar 0406080100120140160180200220201.73.4 5.2 6.910.3Flow - dm n 3/s Technical InformationF602 Filter Kits & AccessoriesBowl Kits –Aluminum (E) .....................................................................BK603B Zinc with Sight Gauge (W) ..............................................BK605WB Drain Kits –External Auto (E) .................................................................SA603D External Auto (W) ................................................................SA602D Internal Auto (All) ............................................................SA602MD Manual (All) ...................................................................SA600Y7-1Semi-Automatic “Overnight” Drain ...................................SA602A7 (Drains automatically under zero pressure)Filter Element Kits – 40 Micron (All) .....................................................................EK602B 5 Micron (All) .....................................................................EK602VB Repair Kits –Deflector, Baffle Assembly, and Retaining Rod (All) ..........RK602C External Auto Drain (All) .....................................................RK602D Internal Auto Drain (All) ...................................................RK602MD Metal Bowl Sight Gauge (W) ........................................RKB605WBSpecificationsBowl Capacity –Aluminum (E) .................................................................32 Ounces Zinc (W) ..........................................................................16 Ounces Port Threads ...........................................................1-1/4, 1-1/2 Inch( ) = Bowl TypeFloat (Inside Bowl) Manual Push ButtonDrain(Outside Bowl)Drain (1/4" NPTF)Connection Through Bowl (1/8" NPSM)P r e s s u r e D r o p - P S I G0.1.2.3P r e s s u r e D r o p - b a r20406080100120140160180200220240260280Flow - SCFM Flow - dm n 3/sPrimary Pressure - PSIG 1.7 3.4 5.2 6.910.3Primary Pressure - bar“Q” Option External Heavy Duty Auto Drain SA602D / SA603DFor heavy duty applications where the filter is being used to remove large volumes of liquid and/or particulate matter from the airstream, the external automatic drain (“Q” option) should be used.Pressure & Temperature Ratings –Aluminum Bowl (E) ............................0 to 300 PSIG (0 to 20.4 bar) 40°F to 150°F (4.4°C to 65.6°C) Zinc (W) ..............................................0 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C) With Internal Auto Drain (R) ..........20 to 175 PSIG (1.4 to 11.9 bar) 40°F to 125°F (4.4°C to 52°C) With External Auto Drain (Q) ............30 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C)Weight –Aluminum Bowl (E) ...................................... 7.7 lb. (3.49 kg) / Unit 31 lb. (14.06 kg) / 4-Unit Master Pack Zinc Bowl (W) ................................................. 7 lb. (3.18 kg) / Unit 28 lb. (12.70 kg) / 4-Unit Master PackMaterials of ConstructionBody .............................................................................................Zinc Bowls –(E) ...................................................Aluminum without Sight Gauge (W) ................................................................Zinc with Sight Gauge Drain –Manual Twist & Overnight .......................................................Brass Housing “R” ............................................................................Acetal Housing “Q” .........................................................................Bronze Filter Elements –40 Micron (Standard) ................................................Polypropylene 5 Micron (Optional) ...................................................Polypropylene Seals ...........................................................................................Nitrile Sight Gauge ...............................................................................Nylon。
安全阀型号解释
安全阀型号解释
安全阀型号由一串字母和数字代号组成，一般由字母和数字组成，根据生产厂家不同，字母不同，排序不同，代表的意义都会有所区别。
举例A28H-16C，其中A表示的是安全阀，H表示的是密封面材质为合金钢，C表示的是阀体材质为碳钢，28表示的是全启式外纹连接，16表示公称压力为16MPa。
除了A28H-16C这个例子，还有许多其他的安全阀型号，比如A42F-16P和A48Y-20等。
这些型号中的字母和数字组合代表了不同的含义。
以A42F-16P为例，其中A表示安全阀，42表示法兰连接，F表示封闭式结构，16表示公称压力为16MPa，P表示阀体材质为不锈钢。
而A48Y-20中的A表示安全阀，48表示法兰连接，Y表示弹簧载荷式结构，20表示公称压力为20MPa。
需要注意的是，每个生产厂家都有自己的型号命名规则，因此对于不同的安全阀型号，应参考厂家提供的使用说明书来进行解读。
同时，由于不同生产厂家的质量标准和技术要求可能存在差异，因此在使用安全阀时，还应注意遵循相关的安全操作规程和标准。
Chroma 62000H 系列可编程直流电源产品介绍说明书
Chroma's new 62000H Series of programmable D C p o w e r s u p p l i e s o ff e r m a n y u n i q u e advantages for telecom, automated test system & integration, industrial, battery charge & simulation for hybrid cars and solar panel simulation. These advantages include high power density of 15KW in 3U, precision readback of output current and voltage, output trigger signals as well as the ability to create complex DC transient waveforms to test device behavior for spikes, drops, and other voltage deviations.The 62000H Series includes 14 different models ranging from 5KW to 15KW, with current range up to 375A and voltage range up to 1000V. The 62000H can easily parallel up to ten units capable of 150KW with current sharing for bulk power applications, for example, battery bank simulation of 450V/150A/67.5KW for electric vehicle and military use.There are 100 user programmable input status on the front panel for automated testapplication and life cycle ON/OFF test. In addition, the 62000H has a 16 bit digital control with bright vacuum fluorescent display readout.The 62000H series DC power supplies are very easy to operate either from the front panel keypad or from the remote controller via USB / RS232 / RS485 / APG (Standard) and GPIB & Ethernet (optional). Its compact size with 3U only can be stacked on a bench in a standard rack without any difficulty.Another unique capability of the 62000H supplies is their ability to create complex DC transient waveforms. This capability allows devices to be tested to DC voltage dropouts, spikes and other voltage variations making them an ideal choice for aerospace device testing, inverter testing and other devices which will experience voltage interrupts. Applications include DC/DC converter & inverter voltage drop test, engine start-up simulation, battery automated charging, electronic product life cycle test, etc.PROGRAMMABLE DC POWER SUPPL Y MODEL 62000H SERIES1981MaStEr / SlavE ParallEl & SEriES OPEratiON UP tO 150KwSOlar array SiMUlatiON FUNctiON *When high power is required, it is common to connect two or more power supplies in parallel or series. The 62000H Series supplies have a smart Master / Slave control mode making series/parallel operation fast and simple. In this mode, the master scales values and downloadsdata to slave units so programming is simple and current sharing automatic.Model 62150H-600S/1000S provides a unique feature to simulate the output characteristics of a solar array. This function is useful for MPPT performance evaluation on solar inverter device. User can easily edit the I-V curve, testing and monitor the PV inverter via softpanel , see the right Figure A & B.Remote GPIB/USB/RS232RS485/EthernetLocal Front PanelMasterSlaveSYSTEM BUSFigure A : IV Curve Edit Table Mode Solar Array SimulatorUUT (Solar Inverter)AC Power OutputFigure B : Static MPPT TestLISTSTEP ModeReset Behavior at Voltage Dropof ISO 16750-2Engine Starting Profileof ISO 16750-2Telecom Converter Sag Testing Output Voltage Slew Rate Control Battery Voltage DropoutBattery Voltage SlowDecrease & Decrease profileOrDEriNg iNFOrMatiONNote :Please specify the input voltage level at time of order.GPIB or Ethernet Interface (alternative). Please specified at time of order.*Call for Availability.1234567891011121314151617181920Note*1 : To parallel more than 5 units, please contact factory. Note*2 : Call for availability.Distributed by:JAPANCHROMA JAPAN CORP.11F NARA Building II 2-2-8 Shinyokohama, Kouhokuku,Yokohama City 222-0033 Kanagawa, Japan Tel: +81-45-470-2285Fax: +81-45-470-2287http://www.chroma.co.jpU.S.A.CHROMA SYSTEMS SOLUTIONS, INC.25612 Commercentre Drive, Lake Forest, CA 92630-8830Tel: +1-949-600-6400Fax: +1-949-600-6401Toll Free: +1-866-600-6050 E-mail:*******************Developed and Manufactured by :CHROMA ATE INC.致茂電子股份有限公司HEADQUARTERSNo. 66, Hwa-Ya 1st Rd.,Hwa-Ya Technology Park,Kuei-Shan Hsiang,33383Taoyuan County 33383TaiwanTel: +886-3-327-9999Fax: +886-3-327-8898E-mail:*****************.twEUROPECHROMA ATE EUROPE B.V .Morsestraat 32, 6716 AH Ede,The Netherlands Tel: +31-318-648282Fax: +31-318-648288 E-mail:******************CHINACHROMA ELECTRONICS (SHENZHEN) CO., LTD.8F, No.4, Nanyou Tian An Industrial Estate, Shenzhen, China PC: 518052Tel: +86-755-2664-4598Fax: +86-755-2641-9620Worldwide Distribution and Service Network62000H-201008-2000Note*1 : Call for Availability.Note*2 : To parallel operation more than 5 units, please contact factory. There is parallel mode for DC power supply when the I-V curve function is enabled.All speci fication are subject to change without notice.。
伊莱克斯电磁阀说明书
外 形 尺 寸 OV E R ALL DIM E N S IO N S (m m )
FG6 Rp 2"
56
2/ 6 208 128 182 2000 330
Ｃ
GAS FLOW CHART (PRESSURE DROP)
Ａ Ｃ
Ｂ Ｂ
Ａ
Description The VMR type is a fast opening and fast closing solenoid valve that is normally closed. When not energized the spring works on the seat keeping the gas passage closed. When the coil is powered the valve is rapidly opened.If the power supply is shut off,the valve rapidly closed.
FLOW FACTOR
KVS(m 3/h)
VM R 01--OT N VM R 02--OT N VM R 12--OT N
VMR0 VM R 12-A
VMR1 VMR2 VMR3 VM R35 VMR4 VMR6 VM R4F VM R6F VMR7 VMR8 VMR9 VM R93 VM R95
-
-
2.50
多速NEMA电磁闸，含欧铁合金或固态过载保护器，型号0-4（所有系列），大小5（系列L），适用于连续
Bulletin 520F/520G Multi-Speed NEMA Starters with Eutectic Alloy or Solid-State Overload Relays Sizes 0 through 4 (all series), Size 5 (series L) For Two-Speed Consequent Pole MotorsRenewal PartsFigure 1 is an exploded view of the right-hand or left-hand side starter. Primary parts such as coils and contacts are similar in appearance for all sizes. Secondary parts such as mounting plates, overloads, etc. will vary in appearance. See page 2 for corresponding description of part and part numbers.Figure 1Page 4 contains the corresponding part numbers for the parts illustrated below.Power Pole Adder (qty 2 req’d) Mechanical Interlock(qty 1 req’d)Electrical Interlock(2 req’d)Crossbar Extension(qty 2 req’d)Common Mounting Plate for Left andRight-Hand StartersRepair Parts for Figure 1Size 0 Size 1 Size 2 Size 3 Size 4 Size 5 (Ser. L) ItemDescription of Renewal Part Part No.Part No.Part No. Part No. Part No. Part No. 1 Contact Block Cover 40410-499-01 40410-499-0240420-499-0140430-457-5140440-456-5142450-800-01Right Hand Movable Contact Support and Armature Assembly !40410-498-01 40420-498-01 40430-452-51 40440-453-51 42450-801-012Left Hand Movable Contact Support and Armature ! 40405-304-51 40420-367-51 40430-452-51 "40440-453-51 " 42450-801-01"3 Stationary Contact Block and Base Assembly !40410-494-03 40410-494-04 40420-495-02 40430-462-52 40440-462-52 42450-307-623A Saddle Clamp Assembly (Lug) X-225492 Does Not Apply3B Lug See Item 3A X-316012 40430-461-51 40440-461-51 42450-804-01 3C BoltSee Item 3AM-6289M-6532 M-6834 Included in 3D 3D Front Terminal without Contact 40430-022-02 40440-030-02 42450-302-52 3E Rear Terminal without Contact 40430-024-0240440-314-5140440-314-513F Front/Rear Terminal Screw (See p. 5 for exploded view of Items 3D - 3F parts for nema sizes 3 through 5)#28168-107-26 28168-502-26$4 Coil Cover 40410-496-0140420-497-01 40430-454-51 40440-454-51 42450-803-015 Tie Point Terminal 599-TP02599-TP346 Auxiliary Contact Block 595-A (used as a hold-in contact)7 Operating Coil See table on page 4 8Yoke (50-60 Hz)40410-497-01 40410-497-0240430-455-5140440-458-019 Movable Contact 10 Contact Spring 11 Front Stationary Contact 12 Rear Stationary ContactOrder Single Pole Contact Set9-12 Single Pole Contact Set %(includes [1] each items 9-12) 40410-331-51 40410-331-52 40420-322-51 40430-300-51% 40440-300-51 42450-805-01 13 Overload Relay (includes Item 13B) 42185-800-01 40185-800-01 40185-801-01 40185-802-01 592-BOV16 & 13A Heater Element Screw M-1552 13B Test Module40185-499-01 40430-459-51 42450-807-01 13C Overload Relay AuxiliaryContact (included with item 13) Not Available 595-A34 'Not Available 13D Overload Relay Mounting Plate Does Not Apply40430-045-0240440-028-0242450-028-02 13E Jumper (size 5 only) Does Not Apply42195-800-0114 Solid-State Overload Relay See pages 7 or 814A SMP/E1 Plus Reset Bar Only 40794-011-01 (for SMP overload) / 193-ERA (for E1 Plus overload)15 Mtg. Screw w/Washer (3 req’d) 28169-100-2628169-101-2640430-460-5140440-459-51 $Mounting Plate for Contactor and Overload Relay (40410-124-02 40420-083-02 16 Mounting Plate for SMP-3 ( 4074-031-02 40794-032-0240430-044-0240440-027-0217 Current Transformer & Does Not Apply X-241563 17ATransformer Spring &Does Not Apply42450-806-01! Less Contacts, order Single Pole Contact Set as required. Left-hand starter has 5 power poles, right-hand starter has 3 power poles." Crossbar Extension and Hardware must be ordered separately from table on page 3. Size 0-2 left-hand crossbar assemblies come with crossbar extension and hardware assembled to crossbar assembly.# Front and rear terminal assembly not available as a renewal part. Replace the complete stationary contact block and base assembly. $ Front Terminal Screw Part No. is 28168-503-26 and Rear Terminal Screw Part No. is 28168-502-6.& For Size 5 starter a current transformer assembly (which includes items 13, 15, 17, and 17A) can be ordered as part number 42452-800-01. ' Auxiliary mounted on right-hand side provides N.O. contact function., mounting on left-hand side provides N.C. contact function.( Overload Relays, for sizes 0-2, are attached directly to the mounting plate. Overload Relays, for sizes 3-5, require a separate mounting plate. See Item 13D for sizes 3 and 4. Size 5 overload relay mounting plate is similar.% Left Contactor has two Power Pole Adders and three main power contacts. Contacts in power pole not replaceble for sizes 0-2; sizes 3-5 use single pole contact kits of the same starter size. Size 5 left contactor main poles use size 5 contacts, power pole adders use size 4 contacts.Renewal Parts for Control Circuit TerminalsNEMA Size Mounting Terminal(item 1) Mounting Screw(Item 2)Saddle ClampAssembly (item 3)0 - 2 40410-053-02 28158-072-26 28192-076-333 40430-047-02 M-6289 28192-076-334 -5 40440-035-02 28168-676-26 28192-076-33Siz e Power Pole Adder Kit Mechanical Interlock Electrical Interlock 1 N.O. – 1 N.C. Cross Bar Extension Cross Bar Ext HardwareCommonMounting Plate for Left and Right-Hand Starters0 599-P01A 40410-341-51 595-AB Not Available Not Available 40410-091-02 1 599-P01A 40410-341-51 595-AB Not Available Not Available 40410-091-02 2 599-P2A 40410-341-51 595-ABNot Available Not Available 40420-059-023 599-P3A 40410-341-5140495-462-08 & 40495-462-09 40430-456-51 40430-800-51 40430-079-02 4 599-P4A 40410-341-5240495-462-08 & 40495-462-09 40440-457-51 40440-800-51 40440-079-02 5 599-P4A 40410-341-5240495-462-08 & 40495-462-09 40440-457-51 40440-800-51 42455-040-03Operating Coils (for right hand contactor)Coil Repair Part Number Catalog No. Suffix Code AC VoltsHz Size 0-1 Size 2 Size 3 Size 4 Size 5 (Series L)J 24 60 CB013 CC013 CD013 NA Not Available K 24 50 CB407 CC407 CD407 NA AF407 D 115-120 110 60 50CB236 CC236 CD236 CE236 AF236S 110-115 50 CB322 CC322 CD322 CE322 AF322 H 200-208 60 CB249 CC249 CD249 CE249 AF249 P 220-230 50 CB339 CC339 CD339 CE339 AF339 A 230-240 60 CB254 CC254 CD254 CE254 AF254 T 230-240 50 CB342 CC342 CD342 CE342 AF342 F 277 60 CB260 CC260 CD260 CE260 AF260 N 380 50 CB354 CC354 CD354 CE354 AF354 KN 380-400 50 CB390 CC390 CD390 CE390 AF390 I 415 50 CB357 CC357 CD357 CE357 AF357 Q 440-460 50 CB360 CC360 CD360 CE360 AF360 B 460-480 60 CB273 CC273 CD273 CE273 AF273 M 500 50 CB364 CC364 CD364 CE364 AF364 C 575-600 60 CB278 CC278 CD278 CE278 AF278Operating Coils (for left hand contactor)Coil Repair Part Number Catalog No. Suffix Code AC VoltsHz Size 0-1 Size 2 Size 3 Size 4 Size 5 (Series L)J 24 60 CB013 CC013C CD013 NA Not Available K 24 50 CB407 CC407C CD407C NA AF407 D 115-120 110 60 50CB236 CC236C CD236C CE236C AF236S 110-115 50 CB322C CC322C CD322C CE322C AF322 H 200-208 60 CB249C CC249C CD249C CE249C AF249 P 220-230 50 CB339 CC339C CD339C CE339C AF339 A 230-240 60 CB254 CC254C CD254C CE254C AF254 T 230-240 50 CB342C CC342C CD342C CE342C AF342 F 277 60 CB260 CC260C CD260C CE260C AF260 N 380 50 CB354C CC354C CD354C CE354C AF354 KN 380-400 50 CB390C CC390C CD390C CE390C AF390 I 415 50 CB357C CC357C CD357C CE357C AF357 Q 440-460 50 CB360C CC360C CD360C CE360C AF360 B 460-480 60 CB273 CC273C CD273C CE273C AF273 M 500 50 CB364C CC364C CD364C CE364C AF364 C 575-600 60 CB278 CC278C CD278C CE278C AF278Renewal Parts for Arc Hood Assembly Components – For Nema Sizes 3 and 4Renewal Parts for Nema Size 3 Starters Item # Description A-B Part Number 1 1 Arc HoodOrder StationaryContact Block & Base Assembly (see p.2) 3 Front Terminal 40430-022-02 5 Rear Terminal 40430-024-02 7 Front Stationary Contact 9 Rear Stationary ContactOrder Single PoleContact Kit 40430-300-51 11 Screw for Front/Rear Contact 28168-601-26 2 12 Screw for Front Terminal 28168-107-26 13 Screw for Rear Terminal 28168-107-26Renewal Parts for Nema Size 4 Starters 1 Arc HoodOrder StationaryContact Block & Base Assembly (see p.2) 3 Front Terminal 40440-030-02 5 Rear Terminal 40440-314-51 7 Front Stationary Contact 9 Rear Stationary ContactOrder Single PoleContact Kit 40440-300-51 11 Screw for Front/Rear Contact 28168-676-26 2 12 Screw for Front Terminal 28168-502-26 13 Screw for Rear Terminal 28168-502-26 1 Each part number listed below contains one piece. 2 The screw for the front and rear stationary contacts isincluded in single pole contact kit part number(s) listed above.Renewal Parts for Arc Hood Assembly Components – For Nema Size 5Item # Description A-B Part Number 11 Arc HoodOrder StationaryContact Block & Base Assembly (see p.2) 3 Front Terminal 42450-302-51 5 Rear Terminal 40440-314-51 7 Front Stationary Contact 9 Rear Stationary ContactOrder Single PoleContact Kit 42450-805-01 11 Screw for Front/Rear Contact 28168-676-26 2 12 Screw for Front Terminal 28168-503-21 13 Screw for Rear Terminal 28168-502-261 Each part number listed below contains one piece.2 The screw for the front and rear stationary contacts is included in single pole contact kit part number 42450-805-01.Size 5 Overload Relay Assembly with Current TransformersComplete Part No. 42452-800-01Components from Part Number 42452-800-01 Part NumberNylon Spacer Insulator 42450-031-01Overload Relay 592-BOV16Overload Relay Mounting Plate (not labeled) 42450-028-02Lug 42450-804-01 Nylon Standoff (qty 3 req’d) 42450-029-01Current Transformer Module 42450-032-01Current Transformer Module Mounting Plate (not labeled) 42450-009-02Current Transformer (300 to 5A ratio) qty 3 req’d X-241563(E1 Plus shown below)E1 Plus/SMP Solid-State Overload RelaysOrder the replacement overload relay catalog number from the table below. For example, the E1 Plus Class 10 overload relayfor a 520F/G-BOD-A1B-A1B would be ordered as catalog number 592-EEBC. Bulletin 520F/G multi-speed starters have two overload relays, one overload relay on each starter. The replacement overload part numbers are only for existing bulletin520F/G starters that were ordered with a eutectic, SMP or E1 Plus overload. The part numbers below contain one overload relay. Nema Starter sizes 4 and 5 use the SMP overload relay.Starter SizeFull Load CurrentAdjustment Range (A)Class 10Cat. No.Suffix CodeClass 10OverloadCat. No.Class 20Cat. No.Suffix CodeClass 20OverloadCat. No.Class 30Cat. No.Suffix CodeClass 30OverloadCat. No.E1 Plus/SMP-1 Overload Relay Manual Reset, Phase Loss Protection, Class 10, 15, 20, or 300, 1 0.19 to 0.6 -A1B 592-EEBC -A2B 592-EEBC -A3B 592-EEBC0, 1 0.32 to 1.0 -A1C 592-EEBC -A2C 592-EEBC -A3C 592-EEBC0, 1 1.0 to 2.9 -A1D 592-EECC -A2D 592-EECC -A3D 592-EECC0,1 1.6to5.0 -A1E 592-EECC -A2E 592-EECC -A3E 592-EECC 0, 1 3.7 to 12 -A1F 592-EEDC -A2F 592-EEDC -A3F 592-EEDC0,1 5.7to18 -A1G 592-EEEC -A2G 592-EEEC -A3G 592-EEEC 1 12to38 -A1H 592-EEEC -A2H 592-EEEC -A3H 592-EEEC 2 5.7to18 -A1G 592-EEEC -A2G 592-EEEC -A3G 592-EEEC 2 12to38 -A1H 592-EEFC -A2H 592-EEFC -A3H 592-EEFC 2 14to45 -A1J 592-EEFC -A2J 592-EEFC -A3J 592-EEFC 3 14to45 -A1J 592-EEFD -A2J 592-EEFD -A3J 592-EEFD 3 23to75 -A1K 592-EEGD -A2K 592-EEGD -A3K 592-EEGD 3 66to110 -A1L 592-EEGD -A2L 592-EEGD -A3L 592-EEGD 4 23to75 -A1K 592-A1KE -A2K 592-A2KE -A3K 592-A3KE 4 66to110 -A1L 592-A1LE -A2L 592-A2LE -A3L 592-A3LE 4 57to180 -A1M 592-A1ME -A2M 592-A2ME -A3M 592-A3ME 5 96to300 -A1N 592-A1NF -A2N 592-A2NF -A3N 592-A3NF E1 Plus/SMP-1 Overload Relay Automatic/Manual Reset, Phase Loss Protection, Class 10, 15, 20, or 300, 1 0.19 to 0.6 -A4B 592-EEBC -A5B 592-EEBC -A6B 592-EEBC0, 1 0.32 to 1.0 -A4C 592-EEBC -A5C 592-EEBC -A6C 592-EEBC0, 1 1.0 to 2.9 -A4D 592-EECC -A5D 592-EECC -A6D 592-EECC0,1 1.6to5.0 -A4E 592-EECC -A5E 592-EECC -A6E 592-EECC 0, 1 3.7 to 12 -A4F 592-EEDC -A5F 592-EEDC -A6F 592-EEDC0,1 5.7to18 -A4G 592-EEEC -A5G 592-EEEC -A6G 592-EEEC 1 12to38 -A4H 592-EEEC -A5H 592-EEEC -A6H 592-EEEC 2 5.7to18 -A4G 592-EEEC -A5G 592-EEEC -A6G 592-EEEC 2 12to38 -A4H 592-EEFC -A5H 592-EEFC -A6H 592-EEFC 2 14to45 -A4J 592-EEFC -A5J 592-EEFC -A6J 592-EEFC 3 14to45 -A4J 592-EEFD -A5J 592-EEFD -A6J 592-EEFD 3 23to75 -A4K 592-EEGD -A5K 592-EEGD -A6K 592-EEGD 3 66to110 -A4L 592-EEGD -A5L 592-EEGD -A6L 592-EEGD 4 23to75 -A4K 592-A4KE -A5K 592-A5KE -A6K 592-A6KE 4 66to110 -A4L 592-A4LE -A5L 592-A5LE -A6L 592-A6LE 4 57to180 -A4M 592-A4ME -A5M 592-A5ME -A6M 592-A6ME 5 96to300 -A4N 592-A4NF -A5N 592-A5NF -A6N 592-A6NFE1 Plus Solid-State Overload Relay (cont.) and E3/E3 Plus Solid State Overload Relays(E1 Plus shown below)Order the replacement overload relay catalog number from the table below. For example, the E1 Plus Class 10 overload relayfor a 520F/G-BOD-B1B-B1B would be ordered as catalog number 592-EEBC. Bulletin 520F/G multi-speed starters have two overload relays, one overload relay on each starter. The replacement overload part numbers are only for existing bulletin520F/G starters that were ordered with a eutectic, SMP, E1 Plus, E3, E3 plus overload. The part numbers below contain one overload relay. Nema Starter sizes 4 and 5 use SMP-2 overload relays. Add catalog numbers 193-EGM or 193-EJM to the E1 Plus catalog number if Ground Fault or Jam Protection is required. The E3/E3 Plus overloads include Ground Fault and Jam Protection, as standard, but must be configured via a DeviceNet network or a hand held programming terminal with a continous power source of 24V DC from a DeviceNet network or a power supply.E1 Plus/SMP-2 Overload Relay Automatic/Manual Reset, Field Selectable Trip Class 10, 15, 20, or 30, Phase Loss, JamProtection, and Ground Fault ProtectionStarter Size Full Load CurrentAdjustment Range (A) Catalog No. Suffix Code Overload RelayCatalog No.E1 Plus Ground Faultor Jam Module0, 1 0.19 to 0.6 -B1B 592-EEBC 193-EGM or 193-EJM 0, 1 0.32 to 1.0 -B1C 592-EEBC 193-EGM or 193-EJM 0, 1 1.0 to 2.9 -B1D 592-EECC 193-EGM or 193-EJM 0, 1 1.6 to 5.0 -B1E 592-EECC 193-EGM or 193-EJM 0, 1 3.7 to 12 -B1F 592-EEDC 193-EGM or 193-EJM 0, 1 5.7 to 18 -B1G 592-EEEC 193-EGM or 193-EJM1 12 to 38 -B1H 592-EEEC 193-EGM or 193-EJM2 5.7 to 18 -B1G 592-EEEC 193-EGM or 193-EJM2 12 to 38 -B1H 592-EEFC 193-EGM or 193-EJM2 14 to 45 -B1J 592-EEFC 193-EGM or 193-EJM3 14 to 45 -B1J 592-EEFD 193-EGM or 193-EJM3 23 to 75 -B1K 592-EEGD 193-EGM or 193-EJM3 66 to 110 -B1L 592-EEGD 193-EGM or 193-EJM4 23 to 75 -B1K 592-B1KE Included as Standard4 66 to 110 -B1L 592-B1LE Included as Standard4 57 to 180 -B1M 592-B1ME Included as Standard5 96 to 300 -B1N 592-B1NF Included as Standard E3 DeviceNet Overload Relay with Automatic/Manual Reset, Field Selectable Trip Class 10, 15, 20, or 30, Phase Loss, JamProtection, with DeviceNet Communication Capability0, 1, 2 1.0 to 5.0 -EC1A 592-EC1AC Included as Standard 0, 1, 2 3.0 to 15.0 -EC1B 592-EC1BC Included as Standard 0, 1, 2 5.0 to 25.0 -EC1C 592-EC1CC Included as Standard 0, 1, 2 9.0 to 45.0 -EC1D 592-EC1DC Included as Standard3 9.0 to 45.0 -EC1D 592-EC1DD Included as Standard3 18.0 to 90.0 -EC1E 592-EC1ED Included as Standard E3 Plus DeviceNet Overload Relay with Automatic/Manual Reset, Field Selectable Trip Class 10, 15, 20, or 30, Phase Loss, Jam Protection, and Ground Fault Protection with DeviceNet Communication Capability 0, 1, 2 1.0 to 5.0 -EC2A 592-EC2AC Included as Standard 0, 1, 2 3.0 to 15.0 -EC2B 592-EC2BC Included as Standard 0, 1, 2 5.0 to 25.0 -EC2C 592-EC2CC Included as Standard 0, 1, 2 9.0 to 45.0 -EC2D 592-EC2DC Included as Standard3 9.0 to 45.0 -EC2D 592-EC2DD Included as Standard3 18.0 to 90.0 -EC2E 592-EC2ED Included as StandardImportant User Information Because of the variety of uses for the products described in this publication, those responsible forthe application and use of this control equipment must satisfy themselves that all necessary stepshave been taken to assure that each application and use meets all performance and safetyrequirements, including any applicable laws, regulations, codes and standards.The illustrations, charts, sample programs and layout examples shown in this guide are intendedsolely for purposes of example. Since there are many variables and requirements associated with anyparticular installation, Rockwell Automation does not assume responsibility or liability (to includeintellectual property liability) for actual use based upon the examples shown in this publication.Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation and Maintenance ofSolid-State Control (available from your local Allen-Bradley office), describes some importantdifferences between solid-state equipment and electromechanical devices that should be taken intoconsideration when applying products such as those described in this publication.Reproduction of the contents of this copyrighted publication, in whole or part, without writtenpermission of Rockwell Automation, is prohibited.Throughout this document we use notes to make you aware of safety considerations:Identifies information about practices or circumstances that can lead topersonal injury or death, property damage or economic lossIdentifies information that is critical for successful application andunderstanding of the product.Use only replacement parts and devices recommended by Rockwell Automation to maintain theintegrity of the equipment. It is the user’s responsibility to ensure that the renewal part numberselected is properly matched to the model, series and revision level of the equipment being serviced.Servicing energized Industrial Control Equipment can be hazardous.Severe injury or death can result from electrical shock, burn, orunintended actuation of controlled equipment. Recommended practiceis to disconnect and lockout control equipment from power sources,and release stored energy, if present.Refer to National Fire Protection Association Standard No. NFPA70E, Part 2 and (asapplicable) OSHA rules for Control of Hazardous Energy Sources (Lockout/Tagout) andOSHA Electrical Safety Related Work Practices for safety related work practices, includingprocedural requirements for lockout/tagout, and appropriate work practices, personnelqualifications and training requirements where it is not feasible to de-energize and lockout or tagoutelectric circuits and equipment before working on or near exposed circuit parts.ROCKWELL DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED INRESPECT TO THE INFORMATION (INCLUDING SOFTWARE) PROVIDED HEREBY,INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE,MERCHANTABILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do notcountenance the exclusion of implied warranties; thus, this disclaimer may not apply to you.Allen-Bradley is a trademark of Rockwell Automation。
常用纽扣电池型号对照表
常用纽扣电池型号对照表常用纽扣电池型号对照表CR纽扣电池,CR表示锂-二氧化锰，CR后面的4位数字，前两位是直径，后两位是高，例如：CR2032是指一种20mm直径，3.2mm 高。
附：锌锰电池型号命名与标识说明：IEC标准中，R代表圆柱形，L代表碱性，数字代表电池的大小，数字后面的P代表高功率，这里有一个特殊规定，在表示五号普通锌锰电池时，要标识为R6P，而不是R06或者R6。
CR系列也是一种典型的干电池型号，常见的有CR2025、CR2032等。
其中C是以锂金属为负极，以二氧化锰为正极的化学电池体系，R表示电池的形状为圆柱形，如果是方形则F替代；20表示电池的直径是20mm，32代表电池的高度为3.2mm。
除了单支干电池型号命名外，还有一些组合干电池型号的标识表示如下：1、9V电池：6F22是由6个扁平形电池叠层的碳性电池；6LR61则是由6个扁平形电池叠层的碱性电池；2、AG系列：是直径很小的CR电池，分为AG1到AG13计13种，属于碱性电池；3、23A和27A：是由八个同一规格的AG电池叠层的，也称12V 扣式电池，27A大于23A。
这些组合的干电池型号往往是基于特殊电压或者容量的考虑，也只适用于一些特定领域。
由于这些干电池型号有一定的市场容量，知道它们属于干电池序列这一点，就便于把握其价格与特性。
另外还有非锌锰和锂锰系的干电池，如镁锰电池等，因为比较少见，所以对这种干电池及干电池型号介绍不多。
普通充电电池充电时间计算一、充电常识在这里，首先要说明的是，充电是使用充电电池的重要步骤。
适当合理的充电对延长电池寿命很有好处，而野蛮胡乱充电将会对电池寿命有很大影响。
上一篇曾说过，目前的锂电池基本都是根据各个产品单独封装，互不通用的，因此各个产品也提供各自的充电设备，互不通用，在使用时只要遵循各自的说明书使用即可。
所以本篇对电池充电的介绍主要是指镍镉电池和镍氢电池。
对镍隔电池和镍氢电池充电有两种方式，就是我们大家所熟知的“快充”和“慢充”。
EXTECH RF20 说明书
User's GuidePortable Salinity Refractometer with ATCModel RF20 ArrayIntroductionCongratulations on your purchase of the Extech RF20 Handheld Salinity Refractometer with Automatic Temperature Compensation. This precision optical instrument should be handled gently; avoid touching the optical surface. Careful use of this instrument willprovide years of reliable service.WarrantyEXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a six month limited warranty applies on sensors and cables). If it should become necessary to return the instrument for service during or beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit our website at (click on ‘Contact Extech’ and go to ‘Service Department’ to request an RA number). A Return Authorization (RA) number must be issued before any product is returned to Extech. The sender is responsible for shipping charges, freight, insurance and proper packaging to prevent damage in transit. This warranty does not apply to defects resulting from action of the user such as misuse, improper wiring, operation outside of specification, improper maintenance or repair, or unauthorized modification. Extech specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not be liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited to repair or replacement of the product. The warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or implied.Specifications Scale Range Resolution Parts Per Thousand 0 to 100 0/00 1 0/00Specific Gravity 1.000 to 1.070 d 20/20 0.001 d 20/20Dimensions7.6 x 1.5 x 1.5" (194 x 38 x 38mm) Weight Approx. 8.0 oz. (227g)Description1. Prism2. Cover Plate3. Adjustment Screw4. Mirror Tube5. Eyepiece 1 2 3 4 5OperationThe instrument measures the refractive index of the sample and displays the result in parts per thousand ( 0/00 ) and specific gravity (d 20/20).1. Zero AdjustmentPut distilled water on the prism; enough to cover the entire prism. Close the cover plate and rotate the adjusting screw so that the light/dark boundary line (known as the shadow-line) evens up with the zero line. After the zero adjustment, clean the prism with soft cloth.2. Sample Preparation and ReadingTo take a reading, place a few drops of a sample liquid on the measurement prism.Ensure that enough solution is added to the prism in order to cover the entire prism.Close the prism so that the liquid spreads across the entire surface of the prism without air bubbles or dry spots (see diagrams below). Allow the sample to remain on the prism for approximately 30 seconds.Bad Bad Good While holding the instrument under a lightsource, look through the eyepiece. Thesalinity concentration is determined by theintersection of the boundary of the lightand dark fields (known as the shadow-line) on the printed scale. The left side ofthe scale indicates the specific gravity andthe right side parts per thousand. If thescale appears out of focus, the eyepiecemay be adjusted by rotating the knurledportion. The instrument also features aneye guard to prevent stray light fromentering the eyepiece and causingreflections.It may be necessary to adjust the position of the light source to maximize the contrast of the shadow-line. Under normal conditions, optimal contrast is obtained by holding the instrument underneath and perpendicular to a light source.Once a reading has been taken, wipe dry with a clean cloth (do not wash or rinse) and place the instrument in the supplied plastic case. Store the instrument in a safe, dryenvironment.Temperature is the single most important factor influencing refractometer readings and is one of the largest sources of measurement error. However, this device incorporates automatic temperature compensation and the concern for temperature fluctuations insample liquids is alleviated. When ambient temperature varies from 68°F (20°C),readings are automatically adjusted to compensate for temperature variance between 50°F to 86°F (10°C to 30°C).Calibration and Repair ServicesExtech offers complete repair and calibration services for most of the products we sell.For periodic calibration, NIST certification or repair on most Extech products, call customer service for details on services available. Extech recommends that calibration be performed on an annual basis to ensure calibration integrity.Support Hotline (781) 890-7440Techsupport:Ext.200;Email:******************Repair/Returns:Ext.210;Email:*****************Website: Copyright ©2003 Extech Instruments Corporation.All rights reserved including the right of reproduction in whole or in part in any form.。
贝利摩火灾和烟雾门闸器的技术数据表说明书
BF230-C93Spring-return actuator for fire and smokedampers 90° in ventilation and air-conditioningsystems• Torque motor 18 Nm / 12 Nm• Nominal voltage AC 230 V• Control Open/close• Mechanical interface Form fit 12x12 mm, non-continuous hollow shaft• Silicone cableTechnical dataElectrical data Nominal voltage AC 230 VNominal voltage frequency50/60 HzNominal voltage range AC 198...264 VPower consumption in operation8 WPower consumption in rest position 3 WPower consumption for wire sizing12.5 VAPower consumption for wire sizing note Imax 8.3 A @ 5 msAuxiliary switch2x SPDTSwitching capacity auxiliary switch 1 mA...6 A (3 A inductive), DC 5 V...AC 250 V (II,reinforced insulation)Switching points auxiliary switch5° / 80°Connection supply / control Cable 1 m, 2x 0.75 mm² (Silicone)Connection auxiliary switch Cable 1 m, 4x 0.75 mm² (Silicone)Functional data Torque motor18 NmTorque fail-safe12 NmDirection of motion motor selectable by mounting L/RManual override with position stopAngle of rotation Max. 95°Running time motor<120 s / 90°Running time fail-safe16 s @ 20°CSound power level, motor45 dB(A)Sound power level, fail-safe63 dB(A)Mechanical interface Form fit 12x12 mm, non-continuous hollowshaftPosition indication Mechanical, with pointerService life Min. 60'000 safety positionsSafety data Protection class IEC/EN II, reinforced insulationProtection class auxiliary switch IEC/EN II, reinforced insulationDegree of protection IEC/EN IP54IP protection in all mounting orientationsEMC CE according to 2014/30/EULow voltage directive CE according to 2014/35/EUCertification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14Type of action Type 1.AA.BRated impulse voltage supply / control4 kVPollution degree3Ambient humidity Max. 95% RH, non-condensingSafety dataAmbient temperature normal operation -30...50°C [-22...122°F]Ambient temperature safety operation The safety position will be attained up to max. 75°CStorage temperature -40...80°C [-40...176°F]Servicingmaintenance-free WeightWeight 3.1 kg••••••Safety notesThe device must not be used outside the specified field of application, especially not in aircraft or in any other airborne means of transport.Caution: Power supply voltage!The actuator is adapted and installed on the fire and smoke damper by the damper manufacturer. For this reason, the actuator is only supplied directly to safety dampermanufacturers. The manufacturer then bears full responsibility for the proper functioning of the damper.The two switches integrated in the actuator are to be operated either on power supply voltage or at safety extra-low voltage. The combination power supply voltage/safety extra-low voltage is not permitted.The device may only be opened at the manufacturer's site. It does not contain any parts that can be replaced or repaired by the user.The device contains electrical and electronic components and must not be disposed of as household refuse. All locally valid regulations and requirements must be observed.Product featuresOperating modeThe actuator moves the damper to the operating position at the same time as tensioning the return spring. The damper is turned back to the safety position by spring energy when the supply voltage is interrupted.Manual overrideWithout power supply, the actuator can be operated manually and fixed in any required position. It can be unlocked manually or automatically by applying the supply voltage.SignallingTwo microswitches with fixed settings are installed in the actuator for indicating the damper end positions. The electrical contacts of these microswitches are equipped with a gold/silver coating that permits integration both in circuits with low currents (mA range) and in ones with larger-sized currents (A range) in accordance with the specifications in the data sheet. Itshould be noted with this application however that the contacts can no longer be used in the milliampere range after larger currents have been applied to them, even if this has taken place only once.The position of the damper blade can be read off on a mechanical position indication.Standards / RegulationsThe design of the actuator is based on the specific requirements from the European standards:- EN 15650 Ventilation for buildings – Fire dampers - EN 1366-2 Fire resistance tests on service installations (Part 2: Fire dampers)- EN 13501-3 Fire classification of construction products and building elements(Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers)Recommendation for application The regular operational check (open/close control of the fire damper) enhances the safety ofpeople, animals, property and the environment. Unless other requirements are stipulated –e.g. in the damper manufacturer's operating instructions – Belimo recommends theperformance of a monthly operational check. Fire damper actuators from Belimo aredesigned in accordance with service life specifications contained in the technical data sheetfor regular operational checks. Notes for regular operational checks can be found in theEuropean Product Standard for Fire Dampers (EN 15650) under "Maintenance information". Parts includedHand crankPointerProtective bagForm fit insert 12/10 mmAccessoriesElectrical accessories Description TypeCommunication and power supply unit for fire damper actuators 230 V BKN230-MODAuxiliary switch 2x SPDT SN2-C7Cable set with plug 0.5 m for communication and power supply unit ZST-BS Mechanical accessories Description TypeBracket for SN2-C7 for BF ZSN-BFAdapter, for form fit 12 mm on round shaft 18 mm, L = 33 mm ZA18-BFZK-BFAdapter, for form fit with clamp for round shaft 10...20 mm / square10...16 mmPointer 12x12 mm ZZ12-BHand crank 40 mm ZK1-BHand crank 70 mm ZK2-BProtective bag with wire, Multipack 100 pcs.ZSD-B.1 Electrical installationCaution: Power supply voltage!Parallel connection of other actuators possible. Observe the performance data.Wiring diagramsAC 230 V, open/closeCable colours:1 = blue2 = brownS1 = violetS2 = redS3 = whiteS4 = orangeS5 = pinkS6 = greyBF230-C93 Dimensions。
ec20模块参数
ec20模块参数
摘要：
1.EC20 模块简介
2.EC20 模块参数分类
3.EC20 模块主要参数详解
4.EC20 模块参数设置方法及注意事项
正文：
一、EC20 模块简介
EC20 模块是一款广泛应用于各种电子设备中的模块，以其稳定的性能和强大的功能受到众多用户的青睐。
在了解EC20 模块的参数之前，我们需要先对EC20 模块有一个基本的认识。
二、EC20 模块参数分类
EC20 模块的参数主要可以分为以下几类：通用参数、功能参数、性能参数等。
这些参数共同决定了EC20 模块的性能和功能。
三、EC20 模块主要参数详解
1.通用参数
- 型号：EC20
- 工作电压：DC 5V
- 工作电流：≤500mA
2.功能参数
- 功能：数据传输、存储、处理等
- 接口：USB、HDMI、VGA 等
- 兼容性：支持多种操作系统
3.性能参数
- 存储容量：16GB~128GB
- 读写速度：≥10MB/s
- 响应时间：≤1ms
四、EC20 模块参数设置方法及注意事项
1.参数设置方法
- 通过设备管理器进行参数设置
- 使用专用软件进行参数设置
2.注意事项
- 在设置参数时，请确保设备处于稳定状态，避免因操作不当导致的设备损坏
- 请勿擅自修改未经授权的参数，以免影响设备性能和稳定性
- 如遇到问题，请及时联系专业技术人员进行处理
通过以上对EC20 模块参数的详细介绍，相信您对EC20 模块已经有了更加深入的了解。
ASCO 电磁阀说明书
4167Features•High flow/high-pressure bodies with manual reset toprevent inadvertent valve start-up •Once tripped, can only be manually reset•Electrically Tripped (trips when energized), No Voltage Release (trips when de-energized), or Free Handle constructions•Available for Latched Open or Latched Closed operation •Ideal for controlling critical processes•Some constructions can control aggressive fluids, including steam•Intrinsically Safe constructions are availableSolenoid EnclosuresNominal Ambient T emp. RangesAC: -20˚F to 104˚F (-29˚C to 40˚C)DC: -20˚F to 77˚F (-29˚C to 25˚C)Refer to Engineering Section for details.ApprovalsCSA certified. Some constructions meet shock and vibration ISA S71.03C2.Refer to Engineering Section for details.Standard:RedHat metal solenoid enclosure.Type 1 General Purpose Junction Box.Optional:Explosionproof and Watertight, Types 3, 7 (C and D), and 9.(To order, add prefix "EF" to catalog number.)See Optional Features Section for other available options.Operation AlternativesElectrically Tripped –Valves move to latched position when the solenoid is de-energized, trips when they receive a continuous or momentary (at least 0.3 seconds) electrical signal. When tripped, they can be manually cycled open/closed, but must be reset when the solenoid has once again been de-energized.No Voltage Release –Valves move to latched position when the solenoid is energized, trips when de-energized. When tripped, they can be manually cycled open/closed, but must be reset when the solenoid has once again been energized.Free Handle –Valves move to latched position when the solenoid is energized, trips when de-energized.They cannot be manally cycled open/closed when de-energized. They can be manually cycled open/closed or reset only when energized.Specifications (English units)S P E C I A L S E R V I C E P I L O T169Flow Diagrams170Dimensions:inches (mm)S P E C I A L S E R V I C E P I L O T171Dimensions:inches (mm)Dimensions: inches (mm)172S P E C I A L S E R V I C E P I L O T173Dimensions: inches (mm)3/2SERIES8037/83088310Manual Reset4SPECIAL SERVICE PILOT174Dimensions:inches (mm)。
热继电器型号表共4页文档
热继电器型号表型号机型额定TK-E02A-C热过载继电器0.1-0.15ATK-E02B-C热过载继电器0.13-0.2ATK-E02C-C热过载继电器0.15-0.24ATK-E02D-C热过载继电器0.2-0.3ATK-E02E-C热过载继电器0.24-0.36ATK-E02F-C热过载继电器0.3-0.45ATK-E02G-C热过载继电器0.36-0.54ATK-E02H-C热过载继电器0.48-0.72ATK-E02J-C热过载继电器0.64-0.96ATK-E02K-C热过载继电器0.8-1.2ATK-E02L-C热过载继电器0.95-1.45ATK-E02M-C热过载继电器1.4-2.2ATK-E02N-C热过载继电器1.7-2.6ATK-E02P-C热过载继电器2.2-3.4ATK-E02R-C热过载继电器2.8-4.2ATK-E02S-C热过载继电器4-6ATK-E02T-C热过载继电器5-8ATK-E02U-C热过载继电器6-9ATK-E02V-C热过载继电器7-11ATK-E02W-C热过载继电器9-13ATK-E02X-C热过载继电器12-18ATK-E02Q-C热过载继电器16-22ATK-E02Y-C热过载继电器20-25ATK-E2S-C热过载继电器4-6ATK-E2U-C热过载继电器5-8ATK-E2V-C热过载继电器6-9ATK-E2W-C 热过载继电器7-11ATK-E2X-C热过载继电器9-13ATK-E2B-C热过载继电器12-18ATK-E2E-C热过载继电器24-36ATK-E2I-C热过载继电器32-42ATK-E2H-C热过载继电器40-50ATK-E3V-C热过载继电器7-11ATK-E3W-C热过载继电器9-13ATK-E3X-C热过载继电器12-18ATK-E3B-C热过载继电器18-26ATK-E3E-C热过载继电器24-36ATK-E3F-C热过载继电器28-40ATK-E3G-C热过载继电器34-50ATK-E3J-C热过载继电器45-65ATK-E3O-C热过载继电器48-68ATK-E3R-C热过载继电器64-80ATK-E3M-C热过载继电器65-95ATK-E3I-C热过载继电器85-105ATK-E5B-C热过载继电器18-26ATK-E5E-C热过载继电器24-36ATK-E5F-C热过载继电器28-40ATK-E5G-C热过载继电器34-50ATK-E5J-C热过载继电器45-65ATK-E5M-C热过载继电器65-95ATK-E5I-C热过载继电器85-105ATK-E6J-C热过载继电器45-65ATK-E6L-C热过载继电器53-80ATK-E6M-C热过载继电器65-95ATK-E6N-C热过载继电器85-125ATK-E6P-C热过载继电器110-160ATK-E6HJ-C热过载继电器45-65ATK-E6HL-C热过载继电器53-80ATK-E6HM-C热过载继电器65-95ATK-E6HN-C热过载继电器85-125ATK-E6HP-C热过载继电器110-160ATK-N8M-C热过载继电器65-95ATK-N8N-C热过载继电器85-125ATK-N8P-C热过载继电器110-160ATK-N8R-C热过载继电器125-185ATK-N10N-C热过载继电器85-125ATK-N10P-C热过载继电器110-160ATK-N10R-C热过载继电器125-185ATK-N10S-C热过载继电器160-240ATK-N10HN-C热过载继电器85-125ATK-N10HP-C热过载继电器110-160ATK-N10HR-C热过载继电器125-185ATK-N10HS-C热过载继电器160-240ATK-N12P-C热过载继电器110-160ATK-N12R-C热过载继电器125-185ATK-N12S-C热过载继电器160-240ATK-N12T-C热过载继电器200-300ATK-N12U-C热过载继电器240-360ATK-N12V-C热过载继电器300-450ATK-N12HP-C热过载继电器110-160ATK-N12HR-C热过载继电器125-185ATK-N12HS-C热过载继电器160-240ATK-N12HT-C热过载继电器200-300ATK-N12HU-C热过载继电器240-360ATK-N12HV-C热过载继电器300-450ATK-EO2QM-C热过载继电器1.4-2.2ATK-EO2QN-C热过载继电器1.7-2.6ATK-EO2QP-C热过载继电器2.2-3.4ATK-E02QR-C热过载继电器2.8-4.2ATK-E02QS-C热过载继电器4-6ATK-E02QT-C热过载继电器5-8ATK-E02QU-C热过载继电器6-9ATK-E02QV-C速动热过载继电器7-11ATK-E02QW-C速动热过载继电器9-13ATK-E02QX-C速动热过载继电器12-18ATK-E2QX-C速动热过载继电器12-18ATK-E2QB-C速动热过载继电器18-26ATK-E2QE-C速动热过载继电器24-36ATK-E3QB-C速动热过载继电器18-26ATK-E3QE-C速动热过载继电器24-36ATK-E3QF-C速动热过载继电器28-40ATK-E3QG-C速动热过载继电器34-50ATK-E3QJ-C速动热过载继电器45-65ATK-E3QM-C速动热过载继电器65-95ATK-E5QB-C速动热过载继电器18-26ATK-E5QE-C速动热过载继电器24-36ATK-E5QF-C速动热过载继电器28-40ATK-E5QG-C速动热过载继电器34-50ATK-E5QJ-C 速动热过载继电器45-65ATK-E5QM-C速动热过载继电器65-95ASZ-HCE 热过载继电器SZ-HDE热过载继电器SZ-HEE热过载继电器SZ-A40热过载继电器4N0SZ-A31热过载继电器3N01N0SZ-A22热过载继电器2N02NCSZ-A2O热过载继电器2N0SZ-A11热过载继电器1N01NCSZ-A02热过载继电器2NCSZ-AS1热过载继电器1NO1NCSZ-AS2热过载继电器1NO1NCSZ-RM热过载继电器SZ-ERW1J热过载继电器set(电源侧/负荷侧）SZ-ERW2W热过载继电器set(电源侧/负荷侧）SZ-ERW3W热过载继电器set(电源侧/负荷侧）SZ-Z1热过载继电器AC/DC24-48VSZ-Z2热过载继电器AC/DC100-250VSZ-Z3热过载继电器AC/DC380-440VSZ-Z31热过载继电器AC/DC24-48VSZ-Z32热过载继电器AC/DC100-250VSZ-Z33热过载继电器AC/DC380-440VSZ-Z4热过载继电器AC/DC24-48VSZ-Z5热过载继电器AC/DC100-250VSZ-Z34热过载继电器AC/DC24-48VSZ-Z35热过载继电器AC/DC100-250VSZ-Z36热过载继电器DC24-48VSZ-Z37热过载继电器DC100-250VSZ-R1热过载继电器L=300mmSZ-R2热过载继电器L=500mmSZ-R3热过载继电器L=700mmSZ-R4热过载继电器L=300mmSZ-R5热过载继电器l=500mmSZ-R6热过载继电器L=700mmSZ-N8T热过载继电器SC-N8,SC-N10SZ-N11T热过载继电器SC-N11,SC-N12SZ-WN8T热过载继电器SC-N8SWSZ-WN10T热过载继电器SC-N10SWSZ-WN11T热过载继电器SC-N11,N12SWSZ-ZM1E热过载继电器3相，AC220/230V 0.1-5.5KWSZ-ZM3E热过载继电器3相，AC220/230V 0.1-22KWSZ-ZM2E 热过载继电器3相，AC220/230V 0.1-5.5KWSZ-ZM4E热过载继电器3相，AC220/230V 0.1-22KW希望以上资料对你有所帮助，附励志名言3条：1、常自认为是福薄的人，任何不好的事情发生都合情合理，有这样平常心态，将会战胜很多困难。
FSAF系列电动阀门驱动器产品说明说明书
800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA171FSAF24(-S) US, FSAF120(-S) USOn/Off, Spring Return, Meets 250°F [121°C] for Half Hour, 75 SecondsTorque min. 133 in-lb, for control of air dampersApplicationFor two position control of UL555S rated dampers in HVAC. Actuator sizing should be done in accordance with the damper manufacturer’s specifications.The actuator is mounted directly to a damper shaft or jackshaft 3/8” to 1.05” in diameter by means of its universal clamp. A crank arm and mounting brackets are available if the actuator cannot be direct coupled to the jackshaft or damper shaft.Square footage of damper operated will depend on make and model of damper. Typically 12 sq.ft. minimum up to 24 sq.ft maximum will be operated for UL555S applications.OperationThe FSAF series actuators provide true spring return operation for reliable fail-safe application and positive close-off on UL555S dampers. The spring return system provides constant torque to the damper with, and without, power applied to the actuator.The FSAF series provides 95° of rotation and is provided with a graduated position indicator showing 0 to 95°. The FSAF has a manual positioning mechanism which allows the setting of any damper position within its 95° of rotation.The actuator is shipped in the zero fail-safe position to provide automatic compression against damper gaskets for tight shut-off. When power is applied, the manual mechanism is released and the actuator drives toward the open position where it stops rotating.The manual override can also be released physically by the use of a crank supplied with the actuator.SAFETY NOTE Screw a conduit fi tting into the actuator’s bushing. Jacket the actuator’s input and output wiring with suitable fl exible conduit. Properly terminate the conduit in a suitable junction box.Dimensions (Inches [mm])1.97"3.15" [80]3.86" [98]2.24" [57][50]1.93"[49]2.64"[67]0.26" [6.5]5.85" [148.5]10.59" [269]0.35" [9]0.39" [10]0.65" [16.5]0.19" [5]Standard:1/2" to 1.05"Optional* 3/8" to 3/4" 3/8" to 5/8"*with K4 US clamp3.25" [82.7]04D0Power supplyFSAF24(-S) US 24 VAC ± 20%, 24 VDC -10% +20%FSAF120(-S) US 120 VAC ± 10%, 50/60 HzPower consumptionFSAF24(-S) USrunning 7.5 W, 10 VA, .4 A holding 2 W, 4 VA, .15 AFSAF120(-S) US running 50/60Hz: 9.5 W, 11 VA, .1 A holding 3.5 W, 6 VA, .05 ATransformer sizing 10 VA (Class 2 power source 24V only)Electrical connectionmotor 3 ft, 18 ga, 2 color coded leads 1/2” conduit connectors-S models3 ft, 18 ga,4 leads appliance cable 1/2” conduit connectorsOverload protection electronic throughout 0 to 95° rotation Angle of rotation mechanically limited to 95°Torque133 in-lb [15 Nm] constant Direction of rotation springreversible with cw/ccw mounting Position indicationvisual indicator, 0° to 95°(0° is spring return position)Manual override 3mm hex crank (shipped w/actuator)Running time<75 sec. constant, independent of load spring<20 seconds nominalHumidity5 to 95% RH non-condensingAmbient temperaturenormal duty -22°F to 122°F [-30°C to 50°C]safety duty 3 on/off cycles after 30 minutes at ambienttemperature of 250°F [121°C]Storage temperature -40°F to 176°F [-40°C to 80°C]Housing NEMA type 1 / IP40Housing material zinc coated metal Gears permanently lubricated Agency listings cULus listed to UL873 andCAN/CSA C22.2 No.24Noise level (max)45 dB (A)spring return 62 dBServicing Maintenance free Quality standard ISO 9001, 5 year Belimo warranty Weight (standard / -S model)FSAF24(-S) US 5.7 / 6.2 lbs (2.6 / 2.8 kg)FSAF120(-S) US 6.1 / 6.6 lbs (2.8 / 3 kg)FSAF24-S US, FSAF120-S US Auxiliary Switch2xSPST 7A resistive, 2.5A inductive at 120V or 250V, UL Approved, double-insulated, one switch at 10°, one adjustable from 30° to 90°M 40024 - 05/10 - S u b j e c t t o c h a n g e . © B e l i m o A i r c o n t r o l s (U S A ), I n c .172FSAF120(-S) US, FSAF24(-S) USOn/Off, Spring Return, Meets 250°F [121°C] for Half Hour, 75 SecondsIND-AF2Damper position indicatorK4 US Universal clamp for 3/8” to 3/4” shaftsK4-1 US Universal clamp for up to 1.05” dia. jackshafts K4-H Universal clamp for hexshafts 3/8” to 5/8”KH-AF Crank arm for up to 3/4” round shaft (Series 2)KH-AF-1Crank arm for up to 1.05” jackshaft (Series 2)KH-AFV V-bolt kit for KH-AF and KH-AF-1Tool-0110 mm wrenchZDB-AF2 US Angle of rotation limiter ZG-100Universal mounting bracket ZG-101Universal mounting bracketZG-102Multiple actuator mounting bracket ZG-103Universal mounting bracket ZG-104Universal mounting bracketZG-106Mounting bracket for Honeywell ® Mod IV replacement or new crank arm type installationsZG-107Mounting bracket for Honeywell ® Mod III or Johnson ® Series100 replacement or new crank arm type installationsZG-108Mounting bracket for Barber Colman ® MA 3../4.., Honeywell ®Mod III or IV or Johnson ® Series 100 replacement or new crank arm type installationsZG-AF Crank arm adaptor kit for AF/NF ZG-AF108Crank arm adaptor kit for AF/NF ZS-100 Weather shield (metal)ZS-150Weather shield (polycarbonate)ZS-300NEMA 4X housing 22965-0000112mm form fit square shaft adaptorFor an overview of how to apply the accessories, see Belimo Mechanical Accessories and refer to the Belimo Mounting Methods Guide.NOTE: When using FSAFxx (-S) US actuators, only use accessories listed on this page.Large combination fi re and smoke dampers are to be operated by Belimo FSAF series actuators. Manufacturer shall provide 5 year warranty.Actuators shall draw no more than 11VA at 120V or 24V.Where auxiliary switches are required for signaling, starting fans, or position indica-tion, -S model actuators, damper blade, or proximity switches shall be provided.Smaller dampers shall employ Belimo FSLF or FSNF actuators per damper manufac-turer recommendations.1Provide overload protection and disconnect as required.2CAUTION Equipment Damage!Actuators may be connected in parallel.Power consumption and input impedance must be observed.3Actuator may also be powered by 24 VDC.4No ground connection required. Double insulated.5For end position indication, interlock control, fan startup, etc., t he FSAF24-S US and FSAF120-S US incorporates two b uilt-in auxiliary switches: 2 x SPST, 7A resistive, 2.5 i nductive @120/250 VAC, UL Approved, one switch is fi xed at 10, o ne is adjustable from 30 to 90.Meets UL requirements without the need of an electrical ground connection.Meets cULus or UL and CSA Standard requirements without the need of an electrical ground connection.WARNING Live Electrical Components!G During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. H ave a qualifi ed licensed electrician or other individual who has been properly trained in handling live electrical components perform theset asks. Failure to follow all electrical safety precautions when exposed to live electrical compo-nents could result in death or serious injury.FSAF24 US and FSAF120 USW 219_08Auxiliary switchM 40024 - 05/10 - S u b j e c t t o c h a n g e . © B e l i m o A i r c o n t r o l s (U S A ), I n c .。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
100
50
20
10 0.5 1 2 5 10 20 50 100 200 500
REVERSE VOLTAGE (V)
RECT 180° SINE WAVE
7
AVERAGE FORWARD CURRENT (A)
6
5
4
3
2
1
0 0 25 50 75 100 125 150
CASE TEMPERATURE (°C)
180° θ CONDUCTION ANGLE
0°
AVERAGE FORWARD CURRENT VS. AMBIENT TEMPERATURE
Maximum Ratings
Rating
Repetitive Peak Reverse Voltage Average Rectified Output Current Symbol VRRM 6.0 IO 1.0 RMS Forward Current Surge Forward Current Operating JunctionTemperature Range Storage Temperature Range IF(RMS) IFSM Tjw Tstg 60
Unit
V A
A A °C °C
Electrical • Thermal Characteristics
Characteristics
Peak Reverse Current Peak Forward Voltage Thermal Resistance *: Print Land 20x20 Symbol Conditions Min. Typ. Max. Unit 200 0.90 5 80 µA V °C/W IRM Tj=25°C,VRM=VRRM per Diode VFM Tj=25°C, IFM=3A per Diode Rth(j-c) Junction to Case Junction to Ambent Rth(j-a) With P.C.Board mounted *
6
AVERAGE FORWARD POWER DISSIPATION (W)
5
4
3210 0 2 3 4 5 6 7AVERAGE FORWARD CURRENT (A)
PEAK REVERSE CURRENT VS. PEAK REVERSE VOLTAGE
Tj= 150 °C 20 ECH06A20 (per Arm)
ECH06A20-F OUTLINE DRAWING (Dimensions in mm)
4
2 1 3
4
1
2
3
FORWARD CURRENT VS. VOLTAGE
ECH06A20 (per Arm)
20
INSTANTANEOUS FORWARD CURRENT (A)
10
5
2 Tj=25°C Tj=150°C 1
Approx Net Weight:0.30g ECH06A20-F 200 50 Hz,Full Sine Wave Tc=116°C Resistive Load 50 Hz,Full Sine Wave Ta=30°C Resistive Load P.C.Board mounted * 6.66 50 Hz Full Sine Wave,1cycle Non-repetitive - 40 to + 150 - 40 to + 150
0.5
0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
INSTANTANEOUS FORWARD VOLTAGE (V)
180° θ CONDUCTION ANGLE
0°
AVERAGE FORWARD POWER DISSIPATION
ECH06A20 (Total)
RECT 180° SINE WAVE
2.0
1.6
SINE WAVE
1.2
0.8
0.4
0 0 40 80 120 160 200
REVERSE VOLTAGE (V)
180° θ CONDUCTION ANGLE
0°
AVERAGE FORWARD CURRENT VS. CASE TEMPERATURE
VRM=200V ECH06A20 (Total)
6A 200V Cathode Common
SBD
Type :
ECH06A20ECH06A20-F
OUTLINE DRAWING
For High Frequency Rectification FEATURES
* High VRM SBD * Low Forward Voltage Drop and Low Noise * Fully Molded Isolation * Dual Diodes Cathode Common
0.05
0.1
0.2
0.5
1
2
TIME (s)
JUNCTION CAPACITANCE VS. REVERSE VOLTAGE
Tj=25°C,Vm=20mVRMS,f=100kHz,Typical Value 200 ECH06A20 (per Arm)
JUNCTION CAPACITANCE (pF)
AMBIENT TEMPERATURE (°C)
SURGE CURRENT RATINGS
f=50Hz,Sine Wave,Non-Repetitive,No Load 70 ECH06A20
60
SURGE FORWARD CURRENT (A)
50
40
30
20
I FSM 0.02s
10
0 0.02
P.C. Board mounted(Print land=20×20mm),VRM=200V ECH06A20 (Total)
2.0
AVERAGE FORWARD CURRENT (A)
RECT 180°.
1.6
SINE WAVE.
1.2
0.8
0.4
0 0 25 50 75 100 125 150
PEAK REVERSE CURRENT (mA)
10
5
2 0 40 80 120 160 200
PEAK REVERSE VOLTAGE (V)
AVERAGE REVERSE POWER DISSIPATION
ECH06A20 (Total)
RECT 180°
2.4
AVERAGE REVERSE POWER DISSIPATION (W)