电气工程及其自动化英语介绍

合集下载

电气工程及其自动化专业英语 Chapter 1 Fundamentals of Electric Circuits

电气工程及其自动化专业英语 Chapter  1 Fundamentals of Electric Circuits

Section1 Current and Voltage
flow as the movement of positive charges, that is, opposite to the flow of negative charges, as Fig.l-1 illustrates. This convention was introduced by Benjamin Franklin (l706 ~ l790), the American scientist and inventor. Although we now know that current in metallic conductors is due to negatively charged electrons, we will follow the universally accepted convention that current is the net flow of positive charges. Thus, Electric current is the time rate of charge, measured in amperes (A). Mathematically, the relationship among current i, charge q, and time t is
Section1 Current and Voltage
i
The charge transferred between time t0 and t is obtained by integrating both sides of Eq. (1-1). We obtain t
dq dt
(1-1)

q idt

电气工程及其自动化专业英语-精品

电气工程及其自动化专业英语-精品
• It should be obvious that since the primary winding also experiences flux changes, there is a primary e.m.f. self-induced this time. With winding 1 excited, the primary e.m.f. would be equal to N1dΦ 11/dt. This is practically in phase opposition to (与---反相 )the applied terminal voltage V1 and limits the current to a very much smaller value than V1/R1, where R1 is the primary resistance( 原边电阻).
• Looked at another way, the leakage flux Φ 1 which links N1 turns alone and “leaks” between the two windings without linking the N2 turns, is a much smaller fraction of the total, making for(有助于, 倾向于) more efficient energy transfer.
This e.m.f. would drive a load current through any circuit connected to the terminals of the second coil. Energy would then be transferred through the medium of the magnetic field(磁场媒介) from coil 1 toof component Φ 1 is unchanged, however, since it is produced by primary current alone and is therefore in phase with it. Further, even with an iron core the reluctance offered to Φ 1 is still predominantly due to its path in air so that the leakage flux remains virtually proportional to the primary current providing(=provided) the iron path is not greatly saturated(饱和). The e.m.f. -N1dΦ 1/dt may thus be treated as if it were due to an unsaturated inductance of magnitude N12∧1. The corresponding leakage reactance is a dominant factor in transformer behavior(characteristic).

电气工程及其自动化专业英语介绍

电气工程及其自动化专业英语介绍

电气工程及其自动化专业英语介绍Introduction:Electrical Engineering and its Automation is a field of study that combines electrical engineering principles with automation techniques. This discipline focuses on the design, development, and implementation of electrical systems and their control using various automation technologies. In this article, we will delve into the various aspects of Electrical Engineering and its Automation, including its scope, key concepts, job opportunities, and future prospects.Body:1. Scope of Electrical Engineering and its Automation:1.1 Importance of Electrical Engineering:- Electrical engineering plays a vital role in various industries, including power generation, telecommunications, transportation, and manufacturing.- It involves the design and maintenance of electrical systems, such as power distribution networks, control systems, and electronic devices.1.2 Automation in Electrical Engineering:- Automation techniques are applied to enhance the efficiency, reliability, and safety of electrical systems.- Automation technologies, such as PLC (Programmable Logic Controller) and SCADA (Supervisory Control and Data Acquisition), are used for process control, monitoring, and data acquisition.1.3 Integration of Electrical Engineering and Automation:- The integration of electrical engineering principles with automation technologies enables the development of advanced control systems and intelligent machines.- It facilitates the automation of various industrial processes, leading to increased productivity and reduced human intervention.2. Key Concepts in Electrical Engineering and its Automation:2.1 Electrical Circuit Analysis:- This involves the study of electrical circuits and their behavior using mathematical models and techniques.- Concepts such as Ohm's law, Kirchhoff's laws, and circuit theorems are used to analyze and solve electrical circuit problems.2.2 Power Systems:- Power systems deal with the generation, transmission, and distribution of electrical energy.- Concepts like power generation, power factor correction, and power system protection are essential in ensuring a stable and reliable power supply.2.3 Control Systems:- Control systems involve the regulation and control of electrical processes.- Concepts like feedback control, PID (Proportional-Integral-Derivative) controllers, and system stability are crucial in designing and implementing control systems.3. Job Opportunities in Electrical Engineering and its Automation:3.1 Electrical Engineer:- Electrical engineers are responsible for designing, developing, and maintaining electrical systems.- They work in various industries, including power generation, telecommunications, and manufacturing.3.2 Automation Engineer:- Automation engineers specialize in the design and implementation of automation systems.- They develop control strategies, program PLCs, and integrate automation technologies into electrical systems.3.3 Research and Development:- Electrical engineering and its automation offer numerous research and development opportunities.- Researchers work on developing innovative technologies and improving existing systems to meet the evolving demands of industries.4. Future Prospects in Electrical Engineering and its Automation:4.1 Renewable Energy:- The growing focus on renewable energy sources, such as solar and wind power, presents new challenges and opportunities in electrical engineering and its automation.- Engineers are needed to design and optimize renewable energy systems and integrate them into the existing power grid.4.2 Internet of Things (IoT):- The integration of electrical systems with IoT technologies opens up new avenues for automation and control.- Electrical engineers can leverage IoT to develop smart grids, intelligent buildings, and efficient energy management systems.4.3 Artificial Intelligence (AI):- AI techniques, such as machine learning and neural networks, can be applied to enhance the automation capabilities of electrical systems.- Electrical engineers can explore the use of AI for predictive maintenance, fault detection, and optimization of electrical processes.Conclusion:Electrical Engineering and its Automation is a dynamic field that combines electrical engineering principles with automation technologies. It plays a crucial role in various industries and offers a wide range of job opportunities. The integration of electrical engineering with automation enables the development of advanced control systems and intelligent machines. With the increasing focus on renewable energy, IoT, and AI, the future prospects in this field are promising. As technology continues to advance, electrical engineering and its automation will continue to evolve, driving innovation and shaping the future of industries.。

电气工程及其自动化专业英语学习简介

电气工程及其自动化专业英语学习简介

2024年6月20日
page12
2.1.2 广泛使用非谓语形式
1)动名词(gerund) ➢用动名词短语取代时间从句或简化时间陈述句
gerund phrase→ time subordinate clause ➢用动名词短语做主语 gerund phrase → subject 2)分词(participle) 过去分词短语替代被动语态Past Participle→Passive voice 现在分词短语替代主动语态Present Participle→ Active voice; 3)不定式(infinitive) 用不定式短语来替代表示目的和功能的从句或语句
cannot …too(over) You can’t be too careful. ➢ A circuit breaker operation is followed by a disconnector operation.
断路器操作要被隔离开关操作跟随。 断路器操作后要进行隔离开关操作。
2024年6月20日
system.
If possible, the open-loop control approach should be used in this system. 可能的话,这个系统应该使用开环控制方法。 2) As illustrated in Fig.1, there is a feedback element in the closed-loop
system.
As in Fig.1, there is a feedback element in the closed-loop system. 就像图1所示的那样,这个闭环系统中有一个反馈元件。
2024年6月20日

电气工程及其自动化专业英语

电气工程及其自动化专业英语
• With time-invariant currents and voltages, the magnetic and electric fields of the associated electric plant are also timeinvariant. This is the reason why no e.m.f.s of self- (or mutual-)induction(自感或互感)appear in D.C. circuits, nor are there (倒装结构)any displacement currents (位移电 流)in the dielectric surrounding the conductors(导体周围的 电介质).
time-invariant 时不变的
self-(or mutual-)induction 自(互)感
displacement current 位移电流 conductance 电导
voltage drop 电压降 volt-ampere characteristics 伏安特性
metal-filament lamp 金属丝灯泡
seen, increase of current from zero to
I≈I1 causes the terminal voltage of the source to decrease linearly
V12=V=E-VS=E-RSI
Fig.1.3
In other words, the voltage drop VS across the source resistance rises in proportion to the current. This goes on until

电气工程及其自动化专业英语苏小林

电气工程及其自动化专业英语苏小林

电气工程及其自动化专业英语-ZOE Su1. Introduction电气工程及其自动化( Electrical Engineering and Automation)是一个广泛应用于各个领域的学科,它涵盖了电力系统、电子电路、自动控制、仪器测量等多个方面。

在学习和研究这门学科时,熟悉相关的英语专业术语是非常重要的。

本文档将介绍一些电气工程及其自动化专业中常用的英语词汇和短语。

2. Electrical Engineering 英语词汇2.1 电力系统•Power system: 电力系统•Power generation: 发电•Power transmission: 输电•Power distribution: 配电•Power plant: 发电厂•Substation: 变电站•Transformer: 变压器•Generator: 发电机•Transmission line: 输电线路•Circuit breaker: 断路器•Load: 负载2.2 电子电路•Circuit: 电路•Resistor: 电阻器•Capacitor: 电容器•Inductor: 电感器•Diode: 二极管•Transistor: 晶体管•Integrated circuit (IC): 集成电路•Printed circuit board (PCB): 印制电路板•Voltage: 电压•Current: 电流2.3 自动控制•Control system: 控制系统•Feedback: 反馈•PID controller: 比例积分微分(PID)控制器•Sensor: 传感器•Actuator: 执行器•Control signal: 控制信号•Closed-loop control: 闭环控制•Open-loop control: 开环控制2.4 仪器测量•Instrumentation: 仪器测量•Measurement: 测量•Accuracy: 精度•Calibration: 校准•Sensor: 传感器•Meter: 仪表•Voltmeter: 电压计•Ammeter: 电流计•Oscilloscope: 示波器•Multimeter: 电表3. Electrical Engineering 英语短语3.1 电力系统•Power blackout: 停电•Grid integration: 网络集成•Load shedding: 负荷调节•Power factor: 功率因数•Power outage: 断电•Voltage regulation: 电压调节•Renewable energy: 可再生能源•Power factor correction: 功率因数校正•Power supply: 电源3.2 电子电路•Logic gate: 逻辑门•Circuit design: 电路设计•Printed circuit board (PCB) design: 印刷电路板设计•Analog circuit: 模拟电路•Digital circuit: 数字电路•Circuit analysis: 电路分析•Circuit simulation: 电路仿真•Circuit board layout: 电路板布局•Electronic component: 电子元件•Circuit diagram: 电路图3.3 自动控制•Automatic control: 自动控制•Control loop: 控制回路•Feedback loop: 反馈回路•Control system design: 控制系统设计•Proportional control: 比例控制•Integral control: 积分控制•Derivative control: 微分控制•Control algorithm: 控制算法•System response: 系统响应•Setpoint: 设定值3.4 仪器测量•Measurement uncertainty: 测量不确定性•Precision measurement: 精密测量•Measurement accuracy: 测量准确性•Metrology: 计量学•Calibration procedure: 校准程序•Test equipment: 测试设备•Instrument calibration: 仪器校准•Measurement range: 测量范围•Measurement error: 测量误差•Data acquisition: 数据采集4. 总结掌握电气工程及其自动化专业中的英语词汇和短语是很有必要的,它可以帮助我们更好地理解和交流相关知识。

电气工程及其自动化专业英语

电气工程及其自动化专业英语

专业英语电路基础characterize描绘…的特征,塑造人物,具有….的特征property 性质,财产equal in magnitude to 在数量(数量级)上等同于convert 转换converter 转换器time rate 时间变化率mathematically 从数学上来讲differen tiate v 区分,区别in honor of 为纪念某人name in honor of为纪念某人而以他命名electromotive force ( e m f )电动势voltaic battery 伏打电池,化学电池an element 一个电器元件interpret 口译,解释,说明the potential at point a with respect to point b is点a关于点b的电势Potential difference/voltage 电势差/电压expend 花费,消耗instantaneous 瞬时的,促发的passive sign convention 关联参考方向the law of conservation of energy 能量守恒定律reference polarity 参考极性electron 电子electronic 电子的electric 电的,电动的time—varying 时变的constant-valued 常量的metal lic 金属的be due to 是因为,由于,归功于building block 模块Coulomb库伦,Ampere安培,joule焦耳,Volt伏特,Watt瓦特,work 功变量u(t),i(t)是电路中最基本的概念。

他们描述了电路中的各种关系。

电荷量的概念是解释电现象的基本原理,电荷量也是电路中最基本的量.电荷也是构成物质的原子的电器属性,量纲是库伦.我们从初等物理可以得知所有物质是由基本组成部分原子组成,而原子又包括电子(electron),质子(proton)和中子(neutron)我们都知道电荷e是带负电的电子,在数量上等于1.60210*1019 C, 而质子携带同等电荷量的正电荷,相同数量的质子,电子使原子呈现电中性(neutrally charged)。

电气工程及其自动化专业英语苏小林

电气工程及其自动化专业英语苏小林

电气工程及其自动化专业英语苏小林IntroductionElectrical engineering and its automation is a highly specialized field that encompasses the study, design, and application of electrical systems and automation technology.In this document, we will explore various aspects of thisfield and delve into the key concepts and terminologyrelevant to electrical engineering and its automation.1. Fundamentals of Electrical Engineering1.1 Electric circuitsElectric circuits form the backbone of electrical engineering. They involve the flow of electric currentthrough various components such as resistors, capacitors, and inductors. Understanding the behavior of electric circuits is vital for electrical engineers in order to analyze and design electrical systems.1.2 Power systemsPower systems deal with the generation, transmission, and distribution of electricity. This includes power plants, transformers, transmission lines, and distribution networks. Electrical engineers work to ensure the efficient andreliable supply of electricity to meet the needs of consumers.1.3 ElectromagnetismElectromagnetism is a fundamental principle underlyingthe operation of electrical systems. It involves the study of the interaction between electric currents and magnetic fields. Knowledge of electromagnetism is crucial for electrical engineers to analyze and design devices such as motors, transformers, and generators.2. Automation Technology2.1 Programmable Logic Controllers (PLCs)PLCs are specialized computers used to control and automate industrial processes. They are programmable and can monitor inputs and control outputs to ensure efficient and safe operation of machinery and equipment. Understanding PLC programming is essential for automation engineers in various industries.2.2 Human-Machine Interface (HMI)HMIs enable interaction between humans and machines. They provide a graphical interface for users to monitor andcontrol industrial processes. Knowledge of HMI design and implementation is crucial for automation engineers to create user-friendly and efficient control systems.2.3 Industrial Automation SystemsIndustrial automation systems involve the integration of various technologies to streamline and enhance industrial processes. These systems encompass robotics, sensors, actuators, and control algorithms. Automation engineers design and implement these systems to improve productivity and quality in manufacturing industries.ConclusionThe field of electrical engineering and its automation is a dynamic and constantly evolving discipline. Engineers in this field play a vital role in designing, analyzing, and implementing electrical systems and automation technologies. By understanding the fundamentals and keeping up with advancements in automation technology, professionals in this field contribute to the progress and development of various industries.Note: This document has been prepared in accordance with the given task instructions, without using logical words such as "firstly," "secondly," "finally," or "in conclusion." The content is focused solely on the topic and does not include any irrelevant information or advertisements. The language used is clear and concise, ensuring a coherent flow of ideas throughout the document.。

电气工程及其自动化专业英语面试自我介绍

电气工程及其自动化专业英语面试自我介绍

电气工程及其自动化专业英语面试自我介绍Hello, my name is [Your Name] and I am a graduate student majoring in Electrical Engineering and Automation. I am excited to have the opportunity to introduce myself and share my experiences and aspirations in this field.I have always been fascinated by the world of electricity and how it powers our everyday lives. This passion led me to pursue a Bachelor's degree in Electrical Engineering, where I gained a strong foundation in power systems, control systems, electronics, and communication systems. Throughout my academic career, I have actively participated in research projects, internships, and extracurricular activities to further enhance my knowledge and skills.During my undergraduate studies, I had the opportunity to work on a project that involved designing and implementing a smart grid system for a local power distribution network. This experience allowed me to apply theoretical knowledge toreal-world problems and develop practical solutions. I also interned at a power generation company, where I gained hands-on experience in power plant operations and maintenance.In addition to my technical skills, I am a strong team player with excellent communication and problem-solving abilities. I believe in the importance of collaboration and open communication to achieve project goals efficiently. I am also adaptable and quick to learn new technologies, which makes me well-equipped to handle the challenges of the rapidly evolving electrical engineering field.Looking ahead, I am eager to continue my education and pursue a career in the field of electrical engineering and automation. I am particularly interested in renewable energy systems, smart grid technologies, and industrial automation. I am confident that my academic background, practical experience, and strong work ethic will make me a valuable asset to any organization.Thank you for considering my application. I look forward to the opportunity to further discuss my qualifications and learn more about your company's innovative projects in the field of electrical engineering and automation.。

电气工程及其自动化专业英语

电气工程及其自动化专业英语

专业英语电路基础characterize描绘…得特征,塑造人物,具有…、得特征property 性质,财产equal in magnitude to 在数量(数量级)上等同于convert 转换converter 转换器time rate 时间变化率mathematically 从数学上来讲differen tiate v 区分,区别in honor of 为纪念某人name in honor of为纪念某人而以她命名electromotive force (e m f )电动势voltaic battery 伏打电池,化学电池an element 一个电器元件interpret 口译,解释,说明the potential at point a with respect to point b is点a关于点b得电势Potential difference/voltage 电势差/电压expend 花费,消耗instantaneous 瞬时得,促发得passive sign convention 关联参考方向the law of conservation of energy 能量守恒定律reference polarity 参考极性electron 电子electronic 电子得electric 电得,电动得time-varying 时变得constant-valued 常量得metal lic 金属得be due to 就是因为,由于,归功于building block 模块Coulomb库伦,Ampere安培,joule焦耳,Volt伏特,Watt瓦特,work 功变量u(t),i(t)就是电路中最基本得概念。

她们描述了电路中得各种关系。

电荷量得概念就是解释电现象得基本原理,电荷量也就是电路中最基本得量。

电荷也就是构成物质得原子得电器属性,量纲就是库伦。

我们从初等物理可以得知所有物质就是由基本组成部分原子组成,而原子又包括电子(electron),质子(proton)与中子(neutron)我们都知道电荷e就是带负电得电子,在数量上等于1、60210*1019 C, 而质子携带同等电荷量得正电荷,相同数量得质子,电子使原子呈现电中性(neutrally charged)。

电气工程及其自动化考研复试英文版自我介绍

电气工程及其自动化考研复试英文版自我介绍

电气工程及其自动化考研复试英文版自我介绍Certainly, I will provide you with an English essay based on the given title, without considering the previous instructions. The essay will be more than 600 words long, written in English, and without any unnecessary punctuation marks in the body of the text. Here is the essay:As an aspiring electrical engineering graduate student, I am excited to share my background, experiences, and aspirations with you. My journey in the field of electrical engineering has been a fulfilling and rewarding one, and I am eager to continue my academic and professional pursuits through the challenging and stimulating environment of a postgraduate program.From a young age, I have been fascinated by the intricacies of electricity and the profound impact it has on our daily lives. This captivation led me to pursue a Bachelor's degree in Electrical Engineering, where I had the opportunity to delve into the core principles of circuit theory, electromagnetic fields, power systems, and control systems. Throughout my undergraduate studies, Ideveloped a strong foundation in both theoretical and practical aspects of the discipline, honing my problem-solving skills and gaining valuable hands-on experience.One of the highlights of my academic journey was the chance to participate in several project-based learning initiatives. These experiences allowed me to apply my knowledge to real-world challenges, fostering a deeper understanding of electrical engineering concepts and their practical applications. In particular, I was part of a team that designed and implemented a smart home automation system, leveraging various sensors, microcontrollers, and communication protocols to enhance energy efficiency and user convenience. This project not only broadened my technical expertise but also cultivated my ability to work collaboratively, communicate effectively, and manage complex engineering tasks.Alongside my academic pursuits, I have actively sought out opportunities to engage with the broader electrical engineering community. I have attended regional and national conferences, where I had the privilege of presenting my research on the integration of renewable energy sources into power grids. These experiences have not only strengthened my communication skills but also allowed me to gain valuable insights from industry experts and fellow researchers, further expanding my knowledge and perspectives.Furthermore, I have been involved in various extracurricular activities that have contributed to my personal and professional development. As the president of my university's Electrical Engineering Student Association, I organized technical workshops, invited guest speakers, and facilitated networking events, fostering a vibrant community of like-minded individuals. This leadership role has honed my organizational abilities, decision-making skills, and the capacity to motivate and inspire others.Looking ahead, I am eager to continue my journey in the field of electrical engineering through a postgraduate program. The opportunity to delve deeper into the fascinating realm of electrical engineering and automation would be a privilege. I am particularly interested in exploring the cutting-edge advancements in areas such as smart grid technologies, renewable energy systems, and intelligent control systems. These topics align closely with my personal interests and career aspirations, as I aspire to contribute to the development of sustainable and efficient energy solutions that can positively impact our society.Moreover, I am drawn to the prospect of collaborating with renowned faculty members and talented peers within a stimulating academic environment. I am confident that the rigorous curriculum, research opportunities, and interdisciplinary collaborations offeredby your program would provide the perfect platform for me to expand my knowledge, refine my research skills, and ultimately, make meaningful contributions to the field of electrical engineering and automation.In conclusion, my passion for electrical engineering, my diverse experiences, and my unwavering dedication make me an enthusiastic and well-prepared candidate for your postgraduate program. I am eager to embark on this next chapter of my academic journey and to work diligently towards achieving my goals. I am confident that my background, skills, and aspirations align seamlessly with the objectives of your program, and I am excited at the prospect of becoming a part of your esteemed community of scholars and researchers.。

电气工程及其自动化专业英语作文范文

电气工程及其自动化专业英语作文范文

电气工程及其自动化专业英语作文范文Electrical Engineering and Automation: An Integral Part of Modern SocietyIntroductionElectrical Engineering and Automation, a discipline that has evolved significantly over the past few decades, has become an integral part of modern society. Its widespread applications in industry, agriculture, national defense, and various other fields have propelled it to a pivotal position in the global economy.Historical PerspectiveThe field of Electrical Engineering and Automation was first established approximately forty years ago. As a relatively new discipline, it has quickly grown to encompass a wide range of subfields and applications. From the design of switches for aerospace aircraft to the development of complex automated systems, its influence is pervasive.Core ComponentsThe core of Electrical Engineering and Automation lies in its ability to integrate electricity, machines, and intelligent systems to automate various tasks. This integration enables efficiency, precision, and safety in a wide range of applications.•Electricity and Machines: Electricity provides the power that drives machines and systems. Understanding the behavior ofelectrical circuits, voltage sources, current sources, andvarious network elements is crucial for the effective designand operation of automated systems.•Automation: Automation refers to the use of technology to control and monitor processes and machines with minimal humanintervention. It relies on sensors, actuators, and intelligentcontrollers to achieve desired outcomes.Challenges and OpportunitiesWhile Electrical Engineering and Automation offers immense opportunities for growth and development, it also poses significantchallenges. The complexity of modern systems requires a high level of technical knowledge and expertise. Additionally, the rapid pace of technological advancement requires constant updating of skills and knowledge.However, these challenges also present opportunities for innovation and growth. As new technologies emerge, there is a need for engineers and technicians who can understand and apply them effectively. This creates opportunities for those with a passion for learning and a willingness to adapt to new challenges.ConclusionIn conclusion, Electrical Engineering and Automation is a dynamic and exciting field that offers immense opportunities for growth and development. Its applications are pervasive, and its influence on society is profound. As we continue to push the boundaries of technology, Electrical Engineering and Automation will play an increasingly important role in shaping our future.。

专业是电气工程及其自动化英语

专业是电气工程及其自动化英语

专业是电气工程及其自动化英语Electrical Engineering and Automation.Electrical engineering and automation is a branch of engineering that deals with the generation, transmission, distribution, and utilization of electrical energy. It also involves the design, development, and maintenance of automated systems.Electrical engineers are responsible for designing and maintaining electrical systems in a variety of settings, including homes, businesses, and industrial facilities. They also work on the development of new electrical technologies, such as solar and wind power.Automation engineers are responsible for designing and maintaining automated systems in a variety of settings, including factories, warehouses, and hospitals. They also work on the development of new automation technologies, such as robotics and artificial intelligence.Education.Electrical engineering and automation programstypically require students to complete coursework in mathematics, physics, and computer science. Students also take courses in electrical engineering fundamentals, such as circuit theory, electromagnetic fields, and power systems. Automation engineering students take additional courses in control theory, robotics, and artificial intelligence.Most electrical engineering and automation programs are accredited by the Accreditation Board for Engineering and Technology (ABET). ABET accreditation ensures that programs meet the highest standards of quality and that graduates are prepared to enter the workforce.Career Outlook.The job outlook for electrical engineers and automation engineers is expected to be good over the next few years.The demand for electrical engineers is expected to increase as the world becomes increasingly electrified. The demand for automation engineers is also expected to increase as businesses look to automate more of their operations.Salary.The median annual salary for electrical engineers is $97,410. The median annual salary for automation engineers is $110,140.Related Fields.Electrical engineering and automation is a relatedfield to several other engineering disciplines, including computer engineering, mechanical engineering, andindustrial engineering.Professional Societies.There are a number of professional societies that electrical engineers and automation engineers can join.These societies offer opportunities for professional development, networking, and leadership. Some of the most popular professional societies for electrical engineers and automation engineers include:Institute of Electrical and Electronics Engineers (IEEE)。

电气工程及其自动化 英语

电气工程及其自动化 英语

电气工程及其自动化英语Electric Engineering and its AutomationElectric engineering is a branch of engineering that is concerned with the study, design, application, and maintenance of electrical systems. These systems includepower generation, transmission, distribution, and utilization. Electric engineering plays a critical role in the development and improvement of our daily lives, as it is responsible for the functionality and optimization of machines, devices, and systems that we rely on every day.One of the key developments in electric engineering in recent years is automation. Automation has revolutionized industries across the globe by increasing efficiency, reducing labor costs, and improving safety. Automation allows for thecontrol and operation of machines or systems without human intervention, thereby increasing the accuracy, speed, and reliability of processes.An example of automation in electric engineering is the useof programmable logic controllers (PLCs). PLCs are electronic devices that can be programmed to control industrialprocesses such as conveyor systems, robotic arms, andassembly lines. They can automate complex processes,improving efficiency, accuracy, and reducing the risk of errors.Another example is the use of smart grids. Smart grids useadvanced technologies to automate the distribution of electricity. They allow for two-way communication between the utility and the customer, enabling real-time monitoring and control of electricity usage, reducing consumption, and improving energy efficiency.The automation of electric engineering has also increased the availability of data analysis, allowing for better decision making through the use of mathematical modeling and simulation. This has led to the development of newtechnologies and the improvement of existing ones.In conclusion, electric engineering and its automation have become essential components of modern living. From power generation to distribution, from manufacturing to transportation, electric engineering plays a critical role in our everyday lives. With the continued development of automation technologies and their integration into electric engineering, we can expect further improvements to efficiency, safety, and sustainability.。

电气工程及其自动化专业英语介绍-范本模板

电气工程及其自动化专业英语介绍-范本模板

Electrical Engineering and Automation Electrical Engineering and Automation was created at forty years ago. AS a new subject, it is relating to many walks of life,small to a switch designed to study aerospace aircraft,has its shadow.Electrical Engineering and Automation of electrical information professional is an emerging field of science,but because of people's daily lives and industrial production is closely related to the extraordinarily rapid development of relatively more mature now. High—tech industry has become an important component of the widely used in industry,agriculture,national defense and other fields,in the national economy is playing an increasingly important role.Worse more, Electrical Engineering and Automation is very hard to learn。

The graduate should obtain much knowledge and ability。

电气自动化英语自我介绍

电气自动化英语自我介绍

电气自动化英语自我介绍虽然电气工程及其自动化是一门实用性很强的专业,但面对越来越大的就业压力,求职者依旧要在简历上花点心思。

自我介绍,欢迎阅读。

电气自动化英语自我介绍篇【1】I & & & & & &, is the school graduates, I study the automation, my own love of the profession, in college, I learn professional knowledge, ability has been improved.The prepared mind. Continue to challenge, is to constantly improve the support in my university four years ahead of the inexhaustible power. His alma mater, practical and rigorous study so that I have set a hard, quick thinking, strive for knowledge learning attitude, knowledge structure, solid professional knowledge and proficient computer skills is a combination of. My great advantage. On the basis of professional learning, I study the electronic circuit design software, MCU, PLC programmable controller, MCU application development and design and good electronic circuit. I know that, as a kind of electric students need to master computer applications, has studied a variety of computer programming Clanguage, assembly language, mastering and application of office, Windows XP, smoothly through the computer grade examination, and achieved good results."Ten thousand years too long, seize the day". Time waits for no one, not beyond time will be eliminated in history. Napoleon said: "don39;t want to be a marshal is not a good soldier. I want to say" do not want to do a career staff is not good staff, I want to "race with the wind, I believe the strength and charisma to conquer all, but I hope to the young, the most capable, most of the sense of challenge time culture, self-worth, growth is able to endure hardship, to fight the elite. Because the young, so I have the drive and confidence; because young, I also have shortcomings and deficiencies. But I would like to learn together with other colleagues in the new environment, in common Step together to create enterprise wealthThinking, innovation, pursuit, give me the same creed. I hope I can in the future, can do better.电气自动化英语自我介绍篇【2】Good morning / afternoon / evening, my name is isXXX.. It39;s really an honor to have this opportunity to introduce myself. I want to answer any questions you may improve, and Ihope I can make a good performance todayI am a third year master major in automation at Shanghai Jiao Tong University, Chinese PR.Withtremendous interest in industrial engineering, I am writing this letter to apply for acceptance into your pH. d.graduate project.In 1995, I entered the Nanjing University of science and Technology (SOCIAL) -- widely considered one of the best engineering schools Chinese. During the following undergraduate study, my grades remain outstanding in the whole department. Every semester I won the first prize in 1999, I have the privilege to enter the graduate entrance examination to give up.During my graduate study, my overall GPA (3.77/4.0) ranked in the second semester before 5%., I become a teacher39;s assistant, only to the talented and mature students. This year, I won the Acer scholarship in my department only candidate, this is the ultimate honor student gives me famous university. Now, I am preparing my graduation thesis and the honor of excellent graduation thesis.Research experience and academic activitiesSophomore, I joined the AI enthusiasts Association, started for my future study reduced my interest in.OpenGLMatlab, I designed a simulationprogram transportation scheduling system. By different research groups are now widely used strong. I think, realize the sewage water treatment project for Nanjing sewagetreatment & Analysis of this factory. Is the idea of converting my first practice in our laboratory as a commercial product.In retrospect, I find myself standing on a solid basis in both theory and experience, has been ready until I get a doctorate. My future research interests include: network scheduling problem, heuristic algorithm (especially genetic algorithm and neural network), the network of supply chain research, hybrid system performance Petrie analysis and network and data mining.电气自动化英语自我介绍篇【3】Good morning. It39;s a pleasure for me to be here in front of you to present myself. My name is xx, and I am a candidate for the position of Mechanical EngineerI graduated from xx university, majored in Category:Machine Design & Manufacturing and Their AutomatioFamiliar with optimization of large mechanical system and key parts with equal-strength principlemechanical system of V60, V90 and V80,and optimization of slewing bearings, main bearingsHAZOP andtechnique to analyze safety issues in design and operation processSix Sigma and process to develop new project and upgrade quality to meet and exceed customer needsGood communication and cooperation, and achieve uniform actions with team without power of authority and organization level20xx/12--Present,redesign and localization of yaw gear for V60.Participant, responsible for DVVP of torque limiter in yaw gear V6020xx/10--20xx/12: quality upgrade of main bearing from supplier.responsible for analysis and calculation of the root cause and corrective actions for the improvement together with supplier20xx/3--20xx/4 As mechanical engineer and bearing specialist, responsible for design verification and validation of yaw system, blade bearings, main bearings and service craneNothing is invincible,I believe that I can do well anything.。

相关主题
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

The electrical engineering fastens of automation profession introduction Automating the professional development can be engaged in electrical engineering and it automates related realm to work of, special feature fresh clear compound type deluxe engineering technique talented person, particularly for pay attention to a student to obtain to know the development of ability and overall character of knowing. The professional graduate student adapts to ability strong, employment noodles breadth, employment rate Gao, the three years employment rate attains 100%.Graduate student mainly in the electric power systemResearch, design, production, experiment, construction, management, education etc. unit employment, be engaged in establishing of electric power system, power plant and related industrial realm electrical engineering to account, circulate, install, Adjust to try, research teaching, technique development, technocracy etc. unit employment.The electrical engineering and its automation profession introducesThe antenna of electrical engineering and its automation stretches toward every trade, small greatly arrive the research of astronautics airplane to the design of a switch, all have its figure. The professional student canBe engaged in electrical engineering- related system to circulate, the automatic control, electric power electronics technique, information handle, experiment technique, develop development, economy management and electronics and calculator techniqueApply the work of waiting the realm, is the breadth caliber"compound type" deluxe engineering technique talented person.The need of realm to level talented person of Gao is very big.According to the estimate, get into along with the foreign big business enterprise, Will appear very big indentation in this professional realm, may appear the phenomenon of talented person's supply falls short of demand very much at that time.A, profession synthesize to introduce electrical engineering and it automation the profession is electricity letterA newly arisen academics of interest realm, but because of with people's daily life with and industry produce closely related, develop very quickly, also opposite more mature now.Have already become Gao XinThe importance of the technique industry constitutes part, extensively is applied to realms, such as industry, agriculture and national defense...etc., develop a more and more important function in the national economy. Control a theory and electric power net reasonThe theory is an electrical engineering and automates professional foundation, the electric power electronics technique, calculator technique is also then its main technique means, included system analysis, system design and system at the same timeDevelopment and system management and decision etc. grind to investigate realm. The professionhas some a characteristics, is a strong or weak electricity to combine, the electrician's electronics technique combine together, software and hardware combine together,Have the property that cross the academics, electric power, electronics, control, calculator many academics comprehensive, make the graduate student have a stronger orientation ability the dint is "breadth caliber" profession. Two, the profession teachIt is reason, work and text to combine together to teach to develop condition electrical engineering and automation profession, melt mechanical engineering, Art and calculator Be designed to integral whole of new cross an academics profession of a.LordThe dry academics includes electronics engineering, calculator science and technology and control science and engineering. This is professional to produce in 70's, first at oxford university, the beginning is the control method of direct current, Carry out a driving of component at that time what electric voltage is a direct current, control electric voltage is also a direct current of, the work method of automation is easy, rough, the accuracy is also very low. But direct current ofControl a way because its history of long ago but be been familiar with by people, involuntary people thought of to control an exchanges performance component with the direct current.Along with transistor, big power transistor and fieldThe effect tube waits the emergence and maturity of the electronics spare part of big power and builds up presently and theoretically, with now Algebra, matrix algebra for the weak electricity of the theory basis the strong electricity control system to make moreElectronics technique and automation attain new history height.To this, this profession got the university of extensive development, Japan, the United States and England and other nations to also establish this profession in succession,Is also many in the achievement in this period, if complete a number to control tool machine, the car factory premises automatically controls of the work is already a new topic.Electronics technique and automation, calculator of organic combine, endow withTo the electronics engineering and the automation profession is with the all new content.Is unmanned to manipulate, system simplification, structure and form reasonable, the product of plug-and-play type becomes lately spoiling. Found a nation an early our country many universitiesEstablished this profession, mainly practice sex teaching link to include the electric circuit and electronics technique experiment, electronics craft practice, gold work practice course design, production practice, graduation design, and for the countryHouse develop many of the aspect person just.They have become the expert scholar of professionindustry, in the our country many provinces, city, become framework strength. "Cultural Revolution" period, political because of being subjected toInfluence, the high etc. college of whole country stops soliciting students one after another, this profession was subjected to very bigOf influence can stop soliciting students.But, even if such, many teachers didn't stop a research.They know electronics engineering and from move to turn the modernization construction to the our country to rise importantFunction, as a result, they didn't give up to the professional research and quest. Reform after opening, under the leadership of party the center, the university instauration solicits students, this profession also develops, manyThe university established this profession, and continuously solicit students, annually for the country development in the house in great quantities deluxe compound type talented person, include high classes, such as bachelor's degree and Doctor...etc. to know to know member, especially currently, each particularlyThe industry expands to recruit, soliciting students of this profession quantity is also rising.Although the our country follows before the development of this aspect hasn't stood on the world most,the our country synthesizes the exaltation of national strength along with the our country and outward associateIncrease, we narrow gradually with the hair reach nation of margin.What to have a representative is:Each 300,000,000,000 calculators develop success;Na rice technical control;Imitate a technical application. But a problem that allows of no to neglect: How to greet the challenge of new technique revolution?After this professional experts of joint effort, expand the electronics engineering and the automation profession to open,Is divided into "electric power system and its automation" and"electronics information engineering", cover to originally possessed "insulate a technique" "the electricity insulates and electric cable""electrical engineering electric appliances and its control""electricity workDistance and it, , , automation""application electronics technique" is with a few professional directions like"light source and lighting",etcs.Establish "Gao electric voltage with insulate a technique", , "electrical engineering and electric appliances""Electric power electronics and electric power spread" and"electrician the theory is with new technique""Gao electric voltage with insulate a technique" Bo, , private academic degree bine take industrial product design as foundation, applyCalculator shape, design, carry out structure, sex of industrial product ability, process, the design ofshape etc. with excellent turn.The professional development orientation is social urgent, current firm science technique radicleThe Chu has art innovation again the ability of deluxe compound type technique talented person.This profession emphasizes to train the application, product shape of the student's foreign language, calculator, design...etc. to physically work ability and carry out evenNoodles design, stereoscopic design etc. product designs of the overall intelligence turn.The professional graduate student can be engaged in industrial product shape design, calculator application, sense of vision to inform design and environment design, wideTell the teaching, research, production, development and management work that the creativity, business enterprise image plans etc. profession.Bagged electric circuit principle, electronics technique foundation, electrical engineering to learn, electric power electronics technique, The electric power drags along with control, calculator technique(language, software foundation, hardware foundation, list slice machine etc.), signal and system and control courses like theory,etc.Higher class still according to societyNeeding to be studied is gentle, strong adaptability, the professional lesson and professional free elective course of coverage breadth.Also carry on electrical engineering and control experiment, electronics engineering at the same time system experiment and electric power electronics experiment etc.. Always, the our country is in CIMS and automatically control, robot product, the appropriation integrated circuit etc. contained substantial progress.For example: "Turn according to the integration of tiny machine environmentCAPP applied frame and development platform"developed to take craft knowledge base as to check heart of, with hand over a type to design with each other mode for foundation of comprehensive the intelligence turn CAPP to develop platform and application frame(CAPPFramework), release series products, such as gold leaf CAPP and together square CAPP...etc..Have to support craft knowledge model and dynamic state knowledge to obtain, the design and information of each kind of craftManage, the product craft information share, support the characteristic radicle create into a craft decision etc. function, and provide craft knowledge database management, craft card format definition etc. application support tool with two times openDeliver tool.The system opens sex well, be easy to enlargement and Wei to protect.Product already the business enterprise in whole country, especially CIMS model engineering business enterprise, expansion applied, also develop automatic control deviceAnd series product, the red and outside optoelectronics type safe protection equips, the development of big power, high-quality switch the power.The robot product includes to move a Dragon gate type to automatically spray Tu Ji, dynamoelectric spray machineThe person is gentle to imitate a form to automatically spray Tu Ji, the back and forth type sprays Tu Ji, automatic Tu Jiao's robot, frame type robot, porterage robot, developing of the robot of Hu Han.Above these productses openThe hair application returns just electronics engineering and automation are in an on the side in the production, is not enough to reflect its entire content.The forerunner carries on lately a skill from each aspect under the technical impact abroadThe Shu reorganizes. Employment direction the professional direction has very nice development prospect, therefore under the environment of the disadvantageous employment of outside economic crisis my Yi however decidedly want to choose electricityEngineering and automation are professional.Electrical engineering and automation the profession study the achievement more easily produce an article conversion to the reality, and the efficiency is very considerable.Although employment and economic situation are rigorous, But also be full of opportunity.The our country also really needs the professional talented person now, small all can not get away from these professional talented persons to a family, greatly to the whole society.Under the general circumstance,The student can choose stateowned quality technical director section, graduate school and work mineral business enterprise etc. after graduating;Can be some outsides property and private enterprise, the treatment is certainly considerable.Such asThe fruit ability is enough strong, again during the period of study backlog a little bit well grind to investigate an achievement, oneself completely can start a business and rush an one to belong to his/her own the sky.。

相关文档
最新文档