EAKUN EK-1695C
CY62256 32K x 8 位 CMOS 静态 RAM 数据手册说明书
256K (32K x 8) Static RAMCY62256Features•High speed —55ns •Temperature Ranges —Commercial: 0°C to 70°C —Industrial: –40°C to 85°C —Automotive: –40°C to 125°C •Voltage range —4.5V – 5.5V•Low active power and standby power•Easy memory expansion with CE and OE features •TTL-compatible inputs and outputs •Automatic power-down when deselected •CMOS for optimum speed/power•Available in a Pb-free and non Pb-free standard 28-pin narrow SOIC, 28-pin TSOP-1, 28-pin Reverse TSOP-1 and 28-pin DIP packagesFunctional Description [1]The CY62256 is a high-performance CMOS static RAM organized as 32K words by 8 bits. Easy memory expansion is provided by an active LOW chip enable (CE) and active LOW output enable (OE) and Tri-state drivers. This device has an automatic power-down feature, reducing the power consumption by 99.9% when deselected.An active LOW write enable signal (WE) controls the writing/reading operation of the memory. When CE and WE inputs are both LOW, data on the eight data input/output pins (I/O 0 through I/O 7) is written into the memory location addressed by the address present on the address pins (A 0through A 14). Reading the device is accomplished by selecting the device and enabling the outputs, CE and OE active LOW,while WE remains inactive or HIGH. Under these conditions,the contents of the location addressed by the information on address pins are present on the eight data input/output pins.The input/output pins remain in a high-impedance state unless the chip is selected, outputs are enabled, and write enable (WE) is HIGH.Note:1.For best practice recommendations, please refer to the Cypress application note “System Design Guidelines” on .A 9A 8A 7A 6A 5A 4A 3A 2COLUMN DECODERR O W D E C O D E RS E N S E A M P SINPUTBUFFERPOWER DOWNWE OEI/O 0CE I/O 1I/O 2I/O 3I/O 7I/O 6I/O 5I/O 4A 10A 13A 11A 12A A 14A 1Logic Block Diagram32K × 8ARRAYPin ConfigurationsProduct PortfolioProductV CC Range (V)Speed (ns)Power DissipationOperating, I CC(mA)Standby, I SB2(µA)Min.Typ.[2]Max.Typ.[2]Max.Typ.[2]Max.CY62256L Com’l/Ind’l 4.55.05.555/702550250CY62256LL Commercial 7025500.15CY62256LL Industrial 55/7025500.110CY62256LLAutomotive5525500.11512345678910111415162019181721242322Top ViewNarrow SOIC 121325282726GNDA 6A 7A 8A 9A 10A 11A 12A 13WE V CC A 4A 3A 2A 1I/O 7I/O 6I/O 5I/O 4A 14A 5I/O 0I/O 1I/O 2CE OE A 0I/O 322232425262728125101115141312161918173420217689OEA 1A 2A 3A 4WE V CC A 5A 6A 7A 8A 9A 0CE I/O 7I/O 6I/O 5GND I/O 2I/O 1I/O 4I/O 0A 14A 10A 11A 13A 12I/O 3TSOP I Top View (not to scale)Reverse Pinout 22232425262728125101115141312161918173420217689OE A 1A 2A 3A 4WE V CC A 5A 6A 7A 8A 9A 0CE I/O 7I/O 6I/O 5GND I/O 2I/O 1I/O 4I/O 0A 14A 10A 11A 13A 12I/O 3TSOP I Top View (not to scale)12345678910111415162019181721242322Top ViewDIP 121325282726GNDA 6A 7A 8A 9A 10A 11A 12A 13WE V CC A 4A 3A 2A 1I/O 7I/O 6I/O 5I/O 4A 14A 5I/O 0I/O 1I/O 2CE OE A 0I/O 3Pin DefinitionsPin Number Type Description1–10, 21, 23–26Input A 0–A 14. Address Inputs11–13, 15–19, Input/Output I/O 0–/O 7. Data lines. Used as input or output lines depending on operation27Input/Control WE . When selected LOW, a WRITE is conducted. When selected HIGH, a READ is conducted20Input/Control CE . When LOW, selects the chip. When HIGH, deselects the chip22Input/ControlOE . Output Enable. Controls the direction of the I/O pins. When LOW, the I/O pins behave as outputs. When deasserted HIGH, I/O pins are Tri-stated, and act as input data pins14GroundGND . Ground for the device28Power Supply V CC . Power supply for the deviceNote:2.Typical specifications are the mean values measured over a large sample size across normal production process variations and are taken at nominal conditions (T A = 25°C, V CC ). Parameters are guaranteed by design and characterization, and not 100% tested.Maximum Ratings(Above which the useful life may be impaired. For user guide-lines, not tested.)Storage Temperature .................................–65°C to +150°C Ambient Temperature withPower Applied.............................................–55°C to +125°C Supply Voltage to Ground Potential(Pin 28 to Pin 14)..............................................–0.5V to +7V DC Voltage Applied to Outputsin High-Z State[3]....................................–0.5V to V CC + 0.5V DC Input Voltage[3]................................–0.5V to V CC + 0.5V Output Current into Outputs (LOW).............................20 mA Static Discharge Voltage.......................................... > 2001V (per MIL-STD-883, Method 3015)Latch-up Current.................................................... > 200 mA Operating RangeRange Ambient Temperature (T A)[4]V CC Commercial0°C to +70°C 5V± 10% Industrial–40°C to +85°C 5V± 10% Automotive–40°C to +125°C 5V± 10%Electrical Characteristics Over the Operating RangeParameter Description Test ConditionsCY62256−55CY62256−70Unit Min.Typ.[2]Max.Min.Typ.[2]Max.V OH Output HIGH Voltage V CC = Min., I OH = −1.0 mA 2.4 2.4V V OL Output LOW Voltage V CC = Min., I OL = 2.1 mA0.40.4VV IH Input HIGH Voltage 2.2V CC+0.5V 2.2V CC+0.5VVV IL Input LOW Voltage–0.50.8–0.50.8V I IX Input Leakage Current GND < V I < V CC–0.5+0.5–0.5+0.5µA I OZ Output Leakage Current GND < V O < V CC, Output Disabled–0.5+0.5–0.5+0.5µAI CC V CC Operating SupplyCurrent V CC = 5.5V,I OUT = 0 mA,f = f Max = 1/t RCL25502550mALL25502550I SB1Automatic CEPower-down Current—TTL Inputs V CC = 5.5V, CE > V IH,V IN > V IH or V IN < V IL,f = f MaxL0.40.60.40.6mALL0.30.50.30.5I SB2Automatic CEPower-down Current—CMOS Inputs V CC = 5.5V,CE > V CC− 0.3VV IN > V CC− 0.3V, orV IN < 0.3V, f = 0L250250µALL - Com’l0.150.15LL - Ind’l0.1100.110LL - Auto0.115Capacitance[5]Parameter Description Test Conditions Max.UnitC IN Input Capacitance T A = 25°C, f = 1 MHz, V CC = V CC(typ.)6pFC OUT Output Capacitance8pF Thermal Resistance[5]Parameter Description Test Conditions DIP SOIC TSOP RTSOP UnitΘJA Thermal Resistance(Junction to Ambient)Still Air, soldered on a 4.25 x 1.125 inch,2-layer printed circuit board75.6176.5693.8993.89°C/WΘJC Thermal Resistance(Junction to Case)43.1236.0724.6424.64°C/WNotes:3.V IL (min.)= −2.0V for pulse durations of less than 20 ns.4.T A is the “Instant-On” case temperature.5.Tested initially and after any design or process changes that may affect these parameters.AC Test Loads and WaveformsData Retention CharacteristicsParameter DescriptionConditions [6]Min.Typ.[2]Max.Unit V DR V CC for Data Retention 2.0V I CCDRData Retention CurrentL V CC = 2.0V , CE > V CC − 0.3V ,V IN > V CC − 0.3V , or V IN < 0.3V250µA LL - Com’l 0.15µA LL - Ind’l 0.110µA LL - Auto0.110µA t CDR [5]Chip Deselect to Data Retention Time 0ns t R [5]Operation Recovery Timet RCnsData Retention WaveformNote:6.No input may exceed V CC + 0.5V .3.0V 5V OUTPUTR1 1800ΩR2990Ω100pF INCLUDING JIG AND SCOPEGND90%10%90%10%<5ns<5ns5V OUTPUTR1 1800ΩR2990Ω5pFINCLUDING JIG AND SCOPE (a)(b)OUTPUT1.77VEquivalent to:THE VENIN EQUIVALENTALL INPUT PULSES 639ΩV CC(min)V CC(min)t CDRV DR >2V DATA RETENTION MODEt RCEV CCSwitching Characteristics Over the Operating Range[7]Parameter DescriptionCY62256−55CY62256−70Unit Min.Max.Min.Max.Read Cyclet RC Read Cycle Time5570nst AA Address to Data Valid5570nst OHA Data Hold from Address Change55nst ACE CE LOW to Data Valid5570nst DOE OE LOW to Data Valid2535nst LZOE OE LOW to Low-Z[8]55nst HZOE OE HIGH to High-Z[8, 9]2025nst LZCE CE LOW to Low-Z[8]55nst HZCE CE HIGH to High-Z[8, 9]2025nst PU CE LOW to Power-up00nst PD CE HIGH to Power-down5570ns Write Cycle[10, 11]t WC Write Cycle Time5570nst SCE CE LOW to Write End4560nst AW Address Set-up to Write End4560nst HA Address Hold from Write End00nst SA Address Set-up to Write Start00nst PWE WE Pulse Width4050nst SD Data Set-up to Write End2530nst HD Data Hold from Write End00nst HZWE WE LOW to High-Z[8, 9]2025nst LZWE WE HIGH to Low-Z[8]55ns Notes:7.Test conditions assume signal transition time of 5 ns or less, timing reference levels of 1.5V, input pulse levels of 0 to 3.0V, and output loading of the specifiedI OL/I OH and 100 pF load capacitance.8.At any given temperature and voltage condition, t HZCE is less than t LZCE, t HZOE is less than t LZOE, and t HZWE is less than t LZWE for any given device.9.t HZOE, t HZCE, and t HZWE are specified with C L = 5 pF as in (b) of AC Test Loads. Transition is measured ±500 mV from steady-state voltage.10.The internal Write time of the memory is defined by the overlap of CE LOW and WE LOW. Both signals must be LOW to initiate a Write and either signal canterminate a Write by going HIGH. The data input set-up and hold timing should be referenced to the rising edge of the signal that terminates the Write.11.The minimum Write cycle time for Write Cycle #3 (WE controlled, OE LOW) is the sum of t HZWE and t SD.Switching WaveformsRead Cycle No. 1 (Address Transition Controlled)[12, 13]Read Cycle No. 2 (OE Controlled)[13, 14]Write Cycle No. 1 (WE Controlled)[10, 15, 16]Notes:12.Device is continuously selected. OE, CE = V IL .13.WE is HIGH for Read cycle.14.Address valid prior to or coincident with CE transition LOW.15.Data I/O is high impedance if OE = V IH .16.If CE goes HIGH simultaneously with WE HIGH, the output remains in a high-impedance state. 17.During this period, the I/Os are in output state and input signals should not be applied.ADDRESSDATA OUTPREVIOUS DATA VALIDDATA VALIDt RCt AAt OHA50%50%DATA VALIDt RCt ACEt DOEt LZOEt LZCE t PUHIGH IMPEDANCEt HZOE t HZCEt PDIMPEDANCEICCISBHIGH DATA OUTOECEV CC SUPPLY CURRENTt HDt SDt PWEt SAt HAt AWt WCt HZOEDATA IN VALIDNOTE 17DATA I/OADDRESSCEWEOEWrite Cycle No. 2 (CE Controlled)[10, 15, 16]Write Cycle No. 3 (WE Controlled, OE LOW)[11, 16]Switching Waveforms (continued)t WCt AWt SAt HAt HDt SDt SCEDATA IN VALIDWEDATA I/OADDRESSCEt HD t SDt LZWEt SAt HAt AWt WCt HZWEDATA IN VALIDNOTE 17DATA I/OADDRESSWECETypical DC and AC Characteristics1.21.41.00.60.40.24.04.55.05.56.01.61.41.21.00.8−5525125−55251251.21.00.8N O R M A L I Z E D t A A120100806040200.01.02.03.04.0O U T P U T S O U R C E C U R R E N T (m A )SUPPLY VOLTAGE (V)NORMALIZED SUPPLY CURRENT vs.SUPPLY VOLTAGENORMALIZED ACCESS TIME vs.AMBIENT TEMPERATURE AMBIENT TEMPERATURE (°C)NORMALIZED SUPPLY CURRENT vs.AMBIENT TEMPERATUREAMBIENT TEMPERATURE (°C)OUTPUT VOLTAGE (V)OUTPUT SOURCE CURRENT vs.OUTPUT VOLTAGE 0.00.81.41.11.00.94.04.55.05.56.0N O R M A L I Z E D t A ASUPPLY VOLTAGE (V)NORMALIZED ACCESS TIME vs.SUPPLY VOLTAGE 120140*********0.01.02.03.04.0O U T P U T S I N K C U R R E N T (m A )080OUTPUT VOLTAGE (V)OUTPUT SINK CURRENT vs.OUTPUT VOLTAGE0.60.40.20.0N O R M A L I Z E D I C CN O R M A L I Z E D I C C , I S BI CCI CCV CC = 5.0VV CC = 5.0V T A = 25°CV CC = 5.0V T A = 25°CI SBT A = 25°C0.60.801.31.2V IN = 5.0V T A = 25°C1.4V CC = 5.0V V IN = 5.0V−55251052.52.01.5CURRENT vs.AMBIENT TEMPERATUREAMBIENT TEMPERATURE (°C)1.00.50.0–0.5I SB3.0STANDBY V CC = 5.0V V IN = 5.0VI S B 2 µATruth TableCE WE OE Inputs/Outputs ModePowerH X X High-Z Deselect/Power-down Standby (I SB )L H L Data Out Read Active (I CC )L L X Data In WriteActive (I CC )LHHHigh-ZOutput DisabledActive (I CC )Typical DC and AC Characteristics (continued)3.02.52.01.51.00.50.01.02.03.04.0N O R M A L I Z E D I P OSUPPLY VOLTAGE (V)TYPICAL POWER-ON CURRENT vs.SUPPLY VOLTAGE 30.025.020.015.010.05.00200400600800D E L T A t (n s )AA CAPACITANCE (pF)TYPICAL ACCESS TIME CHANGE vs.OUTPUT LOADING1.251.000.7510203040N O R M A L I Z E D I C CCYCLE FREQUENCY (MHz)0.05.00.010000.50V CC = 4.5V T A = 25°CV CC =5.0V T A = 2 5°C V IN = 0.5VNORMALIZED I CC vs. CYCLE TIMEOrdering InformationSpeed(ns)Ordering Code PackageDiagram Package TypeOperatingRange55CY62256LL−55SNI51-8509228-pin (300-mil Narrow Body) SNC Industrial CY62256LL−55SNXI28-pin (300-mil Narrow Body) SNC (Pb-free)CY62256LL−55ZXI51-8507128-pin TSOP I (Pb-free)CY62256LL−55SNE51-8509228-pin (300-mil Narrow Body) SNC AutomotiveCY62256LL−55SNXE28-pin (300-mil Narrow Body) SNC (Pb-free)CY62256LL−55ZE51-8507128-pin TSOP ICY62256LL−55ZXE28-pin TSOP I (Pb-free)CY62256LL−55ZRXE51-8507428-pin Reverse TSOP I (Pb-free)70CY62256LL−70PC51-8501728-pin (600-Mil) Molded DIP Commercial CY62256LL−70PXC28-pin (600-Mil) Molded DIP (Pb-free)CY62256L−70SNC51-8509228-pin (300-mil Narrow Body) SNCCY62256L−70SNXC28-pin (300-mil Narrow Body) SNC (Pb-free)CY62256LL−70SNC28-pin (300-mil Narrow Body) SNCCY62256LL−70SNXC28-pin (300-mil Narrow Body) SNC (Pb-free)CY62256LL−70ZC51-8507128-pin TSOP ICY62256LL−70ZXC28-pin TSOP I (Pb-free)CY62256L–70SNI51-8509228-pin (300-mil Narrow Body) SNC IndustrialCY62256L–70SNXI28-pin (300-mil Narrow Body) SNC (Pb-free)CY62256LL−70SNI28-pin (300-mil Narrow Body) SNCCY62256LL−70SNXI28-pin (300-mil Narrow Body) SNC (Pb-free)CY62256LL−70ZXI51-8507128-pin TSOP I (Pb-free)CY62256LL−70ZRI51-8507428-pin Reverse TSOP ICY62256LL−70ZRXI28-pin Reverse TSOP I (Pb-free)Please contact your local Cypress sales representative for availability of these partsPackage DiagramsPackage Diagrams (continued)28-pin Thin Small Outline Package Type 1 (8 x 13.4 mm) (51-85071)51-85071-*GDocument #: 38-05248 Rev. *F Page 13 of 14All product and company names mentioned in this document are the trademarks of their respective holders.Package Diagrams (continued)51-85074-*F28-pin Reverse Thin Small Outline Package Type 1 (8x13.4 mm) (51-85074)Document History PageDocument Title: CY62256, 256K (32K x 8) Static RAM Document Number: 38-05248REV.ECN NO.IssueDateOrig. ofChange Description of Change**11345403/06/02MGN Change from Spec number: 38-00455 to 38-05248Remove obsolete parts from ordering info, standardize format*A11522705/23/02GBI Changed SN Package Diagram*B11650609/04/02GBI Added footnote 1Corrected package description in Ordering Information table*C238448See ECN AJU Added Automotive product information*D344595See ECN SYT Added Pb-free packages on page# 10*E395936See ECN SYT Changed address of Cypress Semiconductor Corporation on Page# 1 from“3901 North First Street” to “198 Champion Court”Added CY62256L–70SNXI package in the Ordering Information on Page # 10 *F493277See ECN VKN Updated Ordering Information table。
专业16口KM切换器EAKUNEK1695C
专业16口KVM切换器EAKUN EK-1695C一、KVM切换器的概念KVM是Keyboard（）、Video（显示器）、Mouse（鼠标）的缩写。
KVM切换器的正式的名称为或KVM SWITCH。
KVM切换器简单的说，就是让系统可以通过一组、显示器和鼠标，控制多台服务器或电脑主机的计算机外围设备。
类型主要指KVM切换器所控制的终端类型，如果终端主要是控制电脑则可以叫做多电脑控制类型。
KVM的领域，也已经扩展到串口设备，如、、储存设备及UPS等。
精密的KVM解决可以让多位使用者在任何地点、任何时间访问数以千计的服务器和网络设备。
而且，如事件记录、远程、多层次使用者权限安全管理、环境警示系统、Cat5电缆线等功能，帮助IT管理者从他们希望的任何地点安全地管理日常的运作。
让您轻易访问、监视及管理您所有的IT设备。
称之为全方位数据中心管理（Total Data Center Management，TDCM）。
它是一种集中式管理，可以增加IT设备正常运作的时间（因为可以减少访问及诊断的时间），节省可观的楼地板面积以及不必要的设备与人力，毋须考虑网络的效率就可以访问所有的设备，可以终极地提升您的商业竞争力。
二、16口KVM切换器的定义16口KVM切换器是拥有16个端口的，使用16口KVM切换器，系统管理员仅用1套键盘、鼠标和显示器就可控制16台电脑主机。
三、EK-1695C切换器的产品概述· EK-1695C 是一款性能全面的LCD KVM切换器，浓缩了键盘、触摸鼠标板、19寸液晶、16口CAT5KVM切换器于1U高度，为您能节省您宝贵的机柜空间。
·采用CAT5网线接口，使用网线连接服务器和切换器，有效延伸管控距离，最佳距离（切换器主机到服务器主机）可达50米，机房内分散部署的服务器也能从容管理。
配合必要的CAT5转换模块EA-1000CU(按需订购）,可切换控制多达16台服务器。
·通过树状级联匹配的KVM切换器(需另购置），最多可管控512台服务器，中型机房也能方便的进行集中管控。
欧科EKAS系列_螺杆式风冷冷水(热泵)(含热回收)机组样本(1012版)
■ 回油简单，无需油泵 独特压缩机回油设计，回油简单，无需油泵，杜绝冻裂 换热管的危险。
ኹჁ૦ቶถ ࢅሆဟቲ ਭ఼ེࣞᒜ
ቶถܤછ܈ൈ
140% 120% 100%
80% 60% 40%
0
ਭེࣞܤછࡼ፬ሰ ਭ఼ེࣞᒜ
20%
ਭེࣞᐐଝ
ኹჁ૦ถೆ ེୣધถೆ ņ
注：过热度变小或不稳定，会降低压缩机的性能，甚至使冷媒不能 蒸发，产生液压缩，从而导致压缩机故障；过热度变大，会降 低水侧热交换器的性能。
1963年成立于意大利的EUROKLIMAT是欧洲著名的制冷与空 调设备制造企业，历经近半个世纪的发展历程，通过不断的创新与 开拓，已经成为意大利、西班牙乃至整个欧洲市场上节能空调产品 的代名词。
EK空调始终将舒适节能环保的产品理念融入产品的研发、制 造、服务过程，产品涵盖家用、商用中央空调和精密空调的各个领 域，50多个系列的产品全部按照欧洲制造标准生产，代表着欧洲最 先进的空调科技。
广东欧科空调制冷有限公司作为EUROKLIMAT集团在亚洲的制 造基地和销售服务中心，在中国广东建有超过7万平米的欧科工业 园，为中国用户提供源自欧洲的节能空调解决方案。
2007 柏林—安联保险 (Berlin-Allianz Assurance)
ISO9001：2008 企业质量管理体系认证
ISO14001：2004 环境管理体系认证
ᐥ
ེୣધƗ ེୣધƙ ེୣધƘ ེୣધƚ ེୣધƗ ེୣધƙ ེୣધƘ ེୣધƚ
Hoffman Enclosures Inc. 电子变压器操作适配器（适用于Eaton Cutle
89115496
© 2018 Hoffman Enclosures Inc.
PH 763 422 2211 • /HOFFMAN
-3-
For Floor-Mounted, Two-Door Enclosures with Disconnect on Right Flange
0DVWHU 'RRU
)RURQHWKURXJKVL[GRRUIUHHVWDQGLQJHQFORVXUHV ZLWKWKHGLVFRQQHFWWKHWKHULJKWIODQJH 0DVWHU 'RRU
)RUIORRUPRXQWHGHQFORVXUHVZLWK WKHGLVFRQQHFWRQWKHFHQWHUSRVW
Step 5 Attach the bottom of the slide arm (item 4) to the offset arm of the lock release mechanism. Use two flat washers (item 8), two lockwashers (item 9), and two hex nuts (item 10). Do not tighten until parts are adjusted (see step 6B)
Item No. Description
Part No.
Qty.
1
MOUNTING PLATE, C-H C361 AND C371
26385001
1
2
GASKET, PLATE
89109613
1
3
SCREW, 1/4-20X1/2 PAN HEAD
99401031
4
4
易安电子产品说明书
Eaton 189884Eaton Moeller® series PKZM01 Motor-protective circuit-breaker, 660 V 690 V: 0.55 kW, Ir= 0.63 - 1 A, IP20General specificationsEaton Moeller® series PKZM01 Motor-protective circuit-breaker189884PKZM01-1-EA401508187880293 mm 90 mm 45 mm 0.261 kgCE Marked RoHS conformProduct NameCatalog Number Model Code EANProduct Length/Depth Product Height Product Width Product Weight Compliances0.25 kW0.63 AThermomagnetic15.5 A0.12 kWBuilt-in device fixed built-in technique Phase failure sensitiveScrew connectionThree-pole690 V50 kA1 A5.33 W15.5 A1 A690 VPush button Motor Starters in System xStart - brochureSave time and space thanks to the new link module PKZM0-XDM32MESwitching and protecting motors - catalogProduct Range Catalog Switching and protecting motorseaton-manual-motor-starters-characteristic-characteristic-curve-008.eps eaton-manual-motor-starters-characteristic-characteristic-curve-009.eps eaton-manual-motor-starters-characteristic-characteristic-curve-005.epsDA-DC-00004883.pdfeaton-manual-motor-starters-circuit-breaker-pkzm01-dimensions.eps eaton-manual-motor-starters-circuit-breaker-pkzm01-3d-drawing-002.epseaton-general-ie-ready-dilm-contactor-standards.epseaton-manual-motor-starters-mounting-3d-drawing-002.epsDA-CE-ETN.PKZM01-1-EAIL034045ZUWIN-WIN with push-in technologyDA-CD-pkzm01DA-CS-pkzm01Rated operational power at AC-3, 380/400 V, 50 Hz Overload release current setting - minSwitch off techniqueAdjustment range undelayed short-circuit release - min Rated operational power at AC-3, 220/230 V, 50 Hz Device constructionFunctionsElectrical connection type of main circuitNumber of polesRated operational voltage (Ue) - minRated short-circuit breaking capacity Icu at 400 V AC Rated uninterrupted current (Iu)Power lossAdjustment range undelayed short-circuit release - max Overload release current setting - maxRated operational voltage (Ue) - maxActuator typeDegree of protection BrochuresCatalogsCharacteristic curveDeclarations of conformity DrawingseCAD modelInstallation instructions Installation videosmCAD modelEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaIP20。
电力克泰国有限公司产品说明书：电力EME3500SA顶部冰箱-空调
Item PNC ELC Brand Model MarketSPARE PARTS LISTFreestanding fridge-freezers, top freezers3713A 925053050 00 Electrolux EME3500SA VNE Electrolux Thailand Co.,Ltd. 1910 Electrolux Building New Petchburi Rd. Bangkapi HuaykwangBangkok , 10310 Tel : +662 725 9000Publication-No. 130709Freestanding fridge-freezers,top freezersSAFETY WARNINGAlways turn off and unplug the machine before detaching any parts.When servicing machines, do not removeANY detachable parts while the machine is powered. The reason is internal faults may cause shorts to components that are normally at low voltage presenting a shock hazard.A 925053051 00 Electrolux EME3500SA PHH A 925053052 00 Electrolux EME3500SA SGE A 925053053 00 Electrolux EME3500SA MYH A 925053054 00 Electrolux EME3500SA THE A 925053086 00 Electrolux EME3500SA IDHModel : PNC :Ex. View DrawingEME3500SACabinet Assembly49Pos.Part No. DescriptionE M E 3500P N C 9250 E M E 3500P N C 9250E M E 3500P N C 9250E M E 3500P N C 9250 E M E 3500P N C 9250 E M E 3500P N C 92501 811924701CABINET FOAMED MD350 GRVN 1 1 811924601 CABINET FOAMED MD350 GRPH 1 811924501 CABINET FOAMED MD350 GRSG 1 811924401 CABINET FOAMED MD350 GRMY 1 811991901 CABINET FOAMED MD350 GR1 2 811999101 HINGE BOTTOM BASE RIGHT 1 1 1 1 1 1 3 811996201 FEET BASE HINGE 1 1 1 1 1 1 4 811998901 FEET LEVER2 2 2 2 2 2 5 811949503 SCREW TRUSS 4.2x13 6 6 6 6 6 6 6 811999001 FEET BASE1 1 1 1 1 1 7 811943001 SWITCH DOOR TF DOUBLE 1 1 1 1 1 1 8 811943601 SWITCH DOOR2 2 2 2 2 2 9 811981301SUPPORT HEATER MD1 1 1 1 1 811981402 SUPPORT HEATER TF R600a1 10 811981801HEATER DEFROST R134A 240V 1 1 1 1 1 811981701 HEATER DEFROST R600A 240V1 11 811981201COVER HEATER R134A 1 1 1 1 1 811981101 COVER HEATER R600a 1 12 811980401 CLAMP NTC EVAPORATOR 1 1 1 1 1 1 13 811944701 HARNESS THERMO FUSE 1 1 1 1 1 1 14 811948501 CABLE TIES 2.5x1204 4 4 4 4 4 15 811982002 EVAPORATOR 7 PASSES 6.5 1 1 1 1 1 1 16 811981501 RETAINER THERMAL FUSE 1 1 1 1 1 1 17 811974401 SHROUD FAN1 1 1 1 1 1 18 811974301 BRACKET SHROUD FAN 1 1 1 1 1 1 19 811972801 GROMMET FAN SIDE2 2 2 2 2 2 20 1446048 GROMMET , FAN MOUNTING 2 2 2 2 2 2 21 1451299 BLADE ASSY FAN1 1 1 1 1 1 22 811973301MOTOR FAN 240V/50HZ 1 1 1 1 1 811973302 MOTOR FAN 240V/60HZ 1 23 242585005 PCBA MAIN ERF2002 1 1 1 1 1 1 24 811968401 HOUSING BOX PCB 1 1 1 1 1 1 25 811968301 COVER BOX PCB1 1 1 1 1 1 26 811974701COVER EVAPORATOR FRONT TF1 1 1 1 1 1 811971901 COVER EVAPORATOR MD 1 1 1 1 1 1 28 811972601COVER MID CONNECTOR HOUSIN1 1 1 1 1 1 29 811930402 COVER DEODORIZER BLUE3 3 3 3 3 3 30 811972201 DUCT EVAPORATOR REAR MD111111Pos.Part No. DescriptionE M E 3500P N C 9250 E M E 3500P N C 9250E M E 3500P N C 9250E M E 3500P N C 9250 E M E 3500P N C 9250 E M E 3500P N C 925031 811972901 DUCT MID EPS REAR MD 1 1 1 1 1 1 32 811973101 DUCT MID EPS FRONT MD 1 1 1 1 1 1 33 811969301 BAFFLE DOUBLE MD1 1 1 1 1 1 34 811951901 TAPE ALUMINUM EVC REAR MD1 1 1 1 1 1 35 811971601 COVER SCREW5 5 5 5 5 5 36811974201COVER MULTIFLOW FRONT LUX MD S1 1 1 1 1 1 37 811973401 COVER MULTIFLOW SLIDE 1 1 1 1 1 1 38 811973201 COVER MID FRONT MD1 1 1 1 1 1 39 811944801 HARNESS MULTIFLOW TF LUXUR 1 1 1 1 1 1 40 811974001 DUCT MULTIFLOW TF SMALL 1 1 1 1 1 1 41 811930301 DEODORIZER NANO COPPER 1 1 1 1 1 1 42 811943801 PCBA LIGHTING LED HSLB3 3 3 3 3 3 43 811971501 LENS MULTIFLOW TF 1 1 1 1 1 1 44 811971201 LENS FREEZER MD 350 2 2 2 2 2 2 45 811999201 HINGE CENTRE RIGHT 2 2 2 2 2 2 46 811999401 HINGE TOP RIGHT1 1 1 1 1 1 47 811998801 HINGE TOP COVER RIGHT GR 1 1 1 1 1 1 48 811949401 SCREW TRILOB M5x16 8 8 8 8 8 8 49 811942601 HARNESS SENSOR111111Model : PNC :Ex. View DrawingEME3500SACabinet InteriorParts Assembly25Pos.Part No. DescriptionE M E 3500S A P N C 925053050 E M E 3500S A P N C 925053051E M E 3500S A P N C 925053052E M E 3500S A P N C 925053053 E M E 3500S A P N C 925053054 E M E 3500S A P N C 9250530861 811956701 T&S ASSY WHITE 1 1 1 1 1 12 811956801 FRAME ICE T&S 1 1 1 1 1 13 243262600 T&S ICE CUBE TRAY 2 2 2 2 2 24 811957001 SUPPORT ICE T&S 1 1 1 1 1 15 243262903 KNOB ICE T&S WHITE 2 2 2 2 2 26 811956601 BIN ICE1 1 1 1 1 1 7 1451543 SPRING TWIST&SERVE2 2 2 2 2 2 8 811957201 LID FREEZER SHELF 60W LUX 1 1 1 1 1 1 9 811957701 SHELF FZR FOLDABLE FRONT 60W1 1 1 1 1 1 10 811957501 SHELF FZR FOLDABLE REAR60W1 1 1 1 1 1 11 811957901 SHELF FZR ASSY 60W1 1 1 1 1 1 12 811956201 DRAWER MIDDLE BODY MD350 1 1 1 1 1 1 13 811958101 TRAY CHILL ROOM 60W L 1 1 1 1 1 1 14 811955401 SHELF SPLIT ASSY 60W LUX 1 1 1 1 1 1 15 811958701 SHELF FC ASSY 60W1 1 1 1 1 1 16 811959001 COVER CRISPER ASSY 60W 1 1 1 1 1 1 17 807323001 CRISPER BODY 60W LUX 1 1 1 1 1 1 18 811960201 CRISPER FRONT TF 60W 1 1 1 1 1 1 19 811959801 CRISPER HANDLE TF 60W 1 1 1 1 1 1 20 811959601 DIVIDER CRISPER TF 60W 1 1 1 1 1 1 21 811967901 HOUSING PCBA VLIGHT1 1 1 1 1 1 22 807238301 LIGHT GUIDE N-LIGHT 4LED 1 1 1 1 1 1 23 807114501 LENS N LIGHT 4LED 1 1 1 1 1 1 24 807114301 PCB N LIGHT 60W 4LED 1 1 1 1 1 1 25 811956401 SHELF MID ASSY MD350 1 1 1 1 1 1 26 811967801 COVER PCBA VLIGHT 1 1 1 1 1 1 27 811949501 SCREW TRUSS 4.2x35 1 1 1 1 1 1 28 811958501 LID CHILL ROOM 60W1 1 1 1 1 1 29 811956001 DRAWER MIDDLE FRONT MD350 1 1 1 1 1 1 30 811960801 DRAWER HANDLE MID MD350 1 1 1 1 1 1 31 811959201 KNOB HUMIDIFIER111111Model : PNC :Ex. View DrawingEME3500SASystemcompartment Assembly2.1Pos.Part No. DescriptionE M E 3500S A P N C 925053050 E M E 3500S A P N C 925053051E M E 3500S A P N C 925053052E M E 3500S A P N C 925053053 E M E 3500S A P N C 925053054 E M E 3500S A P N C 9250530861 811998401 BASE COMPRESSOR 60W1 1 1 1 1 12 811979402 COMPRESSOR ACC GVY57AG1 811979301 COMPRESSOR ACC HXK95AA 1 811979003 COMPRESSOR WANBAO ASF 1 1 1 1 2.1 807305701 TERMINAL BLOCK ACC1 1 807306201 TERMINAL BLOCK HXK 1 807280401 BLOCK TERMINAL WANBAO 1 1 1 1 3 811978901 GROMMET COMPRESSOR 4 4 4 4 4 4 4 811998601 CLAMP COMPRESSOR2 2 2 2 2 2 5 811978201 CLAMP DRYER 1 1 1 1 1 1 6 811945601 CAPACITOR 4UF1 1 1 1 811945602 CAPACITOR 4UF 4.8mm1 1 7 811943301 POWERCORD REFRIGERATOR VN1 811943401 POWERCORD REFRIGERATOR PH 1 1 811943201 POWERCORD REFRIGERATOR SG 1 1 811943101 POWERCORD REFRIGERATOR TH 1 8 811942901 HARNESS EARTH1 1 1 1 1 1 9 811949301 SCREW TRILOB M3x102 2 2 2 2 2 10 1441189 DRYER1 1 1 1 1 1 11 1401884 TUBE PROCESS2 2 2 2 2 2 12 811983601 TUBE DISCHARG EXTENSION ACC11 1 1 811983501 TUBE DISCHARG EXTENSION ACC2 1 811983301 TUBE DISCHARG EXTENSION WANB 1 1 13 811982501 TUBE SUCTION EXTENSION ACC11 1 1 811982401 TUBE SUCTION EXTENSION ACC2 1 811982201 TUBE SUCTION EXTENSION WANBA 1 1 14 811978101 PAN DRAIN WATER ACC1 1 1 811977901 PAN DRAIN WATER HXK 1 896113194 PAN DRAIN WATER WANBAO 1 1 15 811949401 SCREW TRILOB M5x162 2 22 2 2Model : PNC : Ex. View DrawingEME3500SA Door Assembly5.15.25.36.16.3 6.2Pos.Part No. DescriptionE M E 3500S A P N C 925053050 E M E 3500S A P N C 925053051E M E 3500S A P N C 925053052E M E 3500S A P N C 925053053 E M E 3500S A P N C 925053054 E M E 3500S A P N C 9250530861 811933901 DOOR FOAMED FC MD350 SS 1 1 1 1 1 12 811933701 DOOR FOAMED MID MD350 SS 1 1 1 1 1 13 811934801 DOOR FOAMED FZR MD350 SS 1 1 1 1 1 14 811986804 RAIL DOOR SUPPORT 60W SILV 1 1 1 1 1 1 5.1 811988515 GASKET FC MD350 1 1 1 1 1 1 5.2 811988514 GASKET MID MD350L 1 1 1 1 1 1 5.3 811988502 GASKET FZR TF60W1 1 1 1 1 1 6.1 807439106 HANDLE FC MD ASSEMBLY 1 1 1 1 1 1 6.2 807439105 HANDLE FC MID ASSEMBLY 1 1 1 1 1 1 6.3 807439104 HANDLE FC FZR ASSEMBLY 1 1 1 1 1 1 7 811962002 BIN DOOR BOTTLE ASSY 60W 1 1 1 1 1 1 8 811961501 BIN DOOR FLEX 1/2 ASSY 1 1 1 1 1 1 811961401 BIN DOOR FLEX 2/3 ASSY 2 2 2 2 2 2 9 807489801 TRAY EGG 10 1 1 1 1 1 1 10 811960701 BIN DAIRY ASSY 1 1 1 1 1 1 12 811960601 CLIP BAG DOOR2 2 2 2 2 2 13 811962102 BIN DOOR SHALLOW ASSY 60W 1 1 1 1 1 1 14 811967401 DOOR COMPLETE UI ASSY TF 1 1 1 1 1 1 15 811969601 PCBA UI1 1 1 1 1 1 16 811988701 BEARING AUTO CLOSER R 3 3 3 3 3 3 17 811948801 SCREW COUNTERSUNK M4.8x19 3 3 33 3 3Model : PNC : - 11 -EME3500SA SAFETY WARNINGAlways turn off and unplug the machine before detaching any parts. When servicing machines, do not remove ANY detachable parts while the machine is powered. The reason is internal faults may cause shorts to components that are normally at low voltage presenting a shock hazard.。
EK50ML Battery-powered Crimping Tool说明书
EK50MLBattery-powered Crimping T oolSerial NumberRegister this product at EK50ML Battery-powered Crimping ToolDescriptionThe EK50ML Battery-powered Crimping Tool is a hand-held, self-contained crimping tool i ntended to crimp cable using Greenlee’s Kwik Cycle ® 9 and CrimpALL ® die sets as well as some competitors’ die sets.U.S. patent pending.SafetySafety is essential in the use and maintenance of Greenlee tools and equipment. This manual and any markings on the tool provide information for avoiding hazards and unsafe practices related to the use of this tool. Observe all of the safety information p rovided.Purpose of this ManualThis manual is intended to familiarize all personnel with the safe operation and maintenance procedures for the following Greenlee tool: EK50ML Battery-powered Crimping Tool Keep this manual available to all personnel.Replacement manuals are available upon request at no charge at .KEEP THIS MANUALTable of ContentsDescription .....................................................................2Safety .............................................................................2Purpose of this Manual ..................................................2Greenlee Contact Information ........................................2Important Safety Information .....................................3–4Identification ...................................................................5Decals .............................................................................5Specifications .................................................................5Battery Charger ..............................................................6Operation ....................................................................7–8Maintenance ...................................................................9Troubleshooting ............................................................10Service ..........................................................................10DIsposal ........................................................................10Die Holders ...................................................................11CrimpALL ® Interchangeable Die Sets .....................11-13All specifications are nominal and may change as designimprovements occur. Greenlee Tools, Inc. shall not be liable for damages resulting from misapplication or misuse of its products.CrimpALL and Kwik Cycle are registered trademarks of Greenlee Tools, Inc.Teflon is a registered trademark of Dupont.Greenlee Contact InformationIf you have any questions, need to arange service or purchase parts or accessories for this Greenlee product: Contact your local Greenlee distributor or Greenlee’s Customer Service Center.Additional copies of this manual are available for download at Greenlee Customer ServiceUSA: 1-800-435-0786 | Canada: 800-435-0786International: 1-815-397-7070******************************Shipping address:Greenlee Factory Service Center 4411 Boeing Dr., Rockford, IL 61109EK50ML Battery-powered Crimping Tool IMPORTANT SAFETY INFORMATIONEK50ML Battery-powered Crimping ToolIMPORTANT SAFETY INFORMATIONEK50ML Battery-powered Crimping ToolIdentificationDecals1. Crimping Dies2. LED Work Light (white)3. Crimping Head4. LED Indicator (red)5. Battery Cartridge6. Battery Lock7. TriggerA. Manual Jaw ReleaseB. I dentificationC. WarningSpecificationsCrimping ToolLength (with battery) ...............................................................................9.93" (252.22 mm)Width ............................................................................................................2.5" (63.5 mm)Depth ..........................................................................................................3.6" (91.44 mm)Weight .........................................................................................................2.18 lb (0.98 kg)Crimping Force ..........................................................................................1.53 tons (15 kN)Recommended Operating Temperature Range ................14 °F to 104 °F (–10 °C to 40 °C) BatteryCharging Time ...........................................................................................................40 min52068605Battery, 10.8V 1.5 Ah li-ion (16.2 Wh)52068603Charger, 10.8V li-ion batteries, 110V 52068604Charger, 10.8V li-ion batteries, 230V457BC613A2EK50ML Battery-powered Crimping ToolBattery and Charger% Charge Remaining1. Charger is plugged into socket.2. Battery is charging.3. Battery is fully charged.4. Battery is defective.5. Battery is too hot or too cold.6.Charger is defective.EK50ML Battery-powered Crimping ToolOperationCharging the BatteryRead the instructions supplied with the battery charger.LED Work Light (white)This LED automatically turns on when the trigger is pulled. It remains on for 10 seconds after the trigger is released.LED Indicator (red)This tool is equipped with a special circuit board incor-porating several important features to inform the user about the current status of the unit. The LED signals in the following cases:EK50ML Battery-powered Crimping Tool5. The crimp cycle will automatically stop whencomplete. Release the trigger upon crimpcompletion and the jaws will automatically retract.Note: The jaws may be manually released by pushing the trigger outward. This may be necessary if, for example, an incorrectly-sized connector has been inserted into the die opening.Operation (cont’d)Installing Dies1. Select the proper dies for the intended crimp.2. Slide the die into the crimping head and securewith screw.3. Properly position the second die. Repeat Step 2.Preparing CableFollow the lug manufacturer’s instructions for appropriate cable strip length.Crimping Cable1. Insert the connector into the appropriate slot of thecrimping die.2. Pull the trigger midway such that the jaws grab andhold the connector in place.3. Insert the stripped wire into the connector.4.Pull trigger all the way down to complete the crimp.RELEASEEK50ML Battery-powered Crimping ToolDailyBefore use:1. Inspect the tool for wear or damage, such as cracks,gouges, or chips.2. Inspect the tool for damage.After use:1. Use a damp cloth and mild detergent to clean thehousing. Allow the housing to dry.2. Place the tool in the carrying case and store in acool, dry place.3. If necessary, recharge the batteries. Refer to theinstructions supplied with the battery charger.MonthlyThoroughly clean all surfaces.Annually or After 35,000 Crimps Send the tool to a Greenlee A uthorized Service Center for inspection.MaintenanceEK50ML Battery-powered Crimping ToolProblemPossible CauseProbable RemedyTool is inoperative.Continuous use causes tool to become too hot and automatically switch off.Allow approximately 3 to 5 minutes of time to cool down.Dirt, contaminants, etc., in jaw area of tool.Clean tool.Tool components worn or damaged.Return tool to a Greenlee A uthorized Service Center.The crimp did not completeEngage manual release and check if the connector is correct. Cut off old con-nector and perform a new crimp with the correct connector.Motor is inoperative.Low or uncharged battery.Try known charged battery. Inoperative battery may be discharged or may have reached life expectancy.Broken switch components.Return tool to a Greenlee A uthorized Service Center.LED glows for 20 seconds.Battery charge low.Charge or replace battery.Note: For Warranty Service or Repair, contact Greenlee customer service at 800-435-0786.TroubleshootingBefore You Begin1. Make sure that the battery is charged. Recheckthe battery after several minutes to make sure the battery is holding its charge.ServiceDo not attempt to open tool, it contains no user serviceable parts. `DisposalDo not throw away in trash. Parts of these tools contain valuable materials and can be recycled. There are companies that specialize in recycling that may be found locally. Dispose of the components in compliance with all applicable regulations.Contact your local waste management authority for more information.2. Use a nonflammable contact cleaner or pencileraser to clean the electrical contacts on the battery and tool.3. Reinstall the battery and check the tool again.Do not discard this product or throw away!1152068455 REV 4© 2020 Greenlee Tools, Inc.CrimpALL ® Interchangeable Die SetsDESCRIPTIONDIE CAT. NO.REMARKSCABLE TYPE CONNECTION CRIMP SIZESRG58, RG59, RG62AUBNC/TNC and 3 Piece0.256" (6.5 mm, 0.213" (5.4 mm), 0.068" (1.7 mm) HEXPA2034Common 2-piece and 3-piece BNC/TNCRG174, RG59/62, mini-coaxial 75 ΩHDTV SMA, True 75 Ω BNC/TNC, Mini-UHF 0.255" (6.5 mm), 0.197" (5.0 mm), 0.178" (4.5 mm), 0.068" (1.7 mm) HEX & 0.042" (1.0 mm) SQ PA2648Common 2-piece and 3-piece BNC/TNC (Kings, ADC, Amphenol, etc.)RG59, RG6, Belden 8281, Belden 1694A HDTV BNC/TNC/CATV "F" True 75 Ω0.324" (8.2 mm), 0.255" (6.5 mm), 0.068" (1.7 mm) HEX & 0.052" (1.3 mm), 0.042" (1.0 mm) SQ PA2649Common 2-piece and 3-piece BNC/TNC (Kings, ADC, Amphenol, etc.)RG6, Belden 1694, Belden 1694A HDTV BNC/TNC True 75 Ω0.278" (7.0 mm), 0.275" (6.9 mm), 0.068" (1.7 mm) HEX & 0.042" (1.0 mm) SQPA2657Common 3-piece BNC/TNC (Kings & ADC HDTV)RG58, Mini-59, RG-174, small coaxialSMA, SMB, Mini-59 BNC/TNC, Mini-UHF0.128" (3.2 mm), 0.213" (5.4 mm), 0.197" (5.0 mm), 0.178" (4.5 mm), 0.068" (1.7 mm) HEX & 0.042" (1.0 mm) SQPA2653Common 2-piece and 3-piece SMA/SMB/BNC/TNC & Mini-UHFRG58, RG174, AT&T 735, 50 and 75 ΩThinnet, BNC/TNC, Mini-UHF0.213" (5.4 mm), 0.178" (4.5 mm) 0.068" (1.7 mm) HEX & 0.042" (1.0 mm) SQPA204650/75 ohm small 2-piece & 3-piece BNC/TNC (Kings, ADC, etc.)RG59, RG62, Belden 8281, 50 and 75 ΩBNC/TNC and Mini-UHF0.315" (8.0 mm), 0.252" (6.4 mm), 0.068" (1.7 mm), HEX 0.042" (1.0 mm) SQPA204775 ohm 2-piece & 3-piece BNC/TNC (Kings, ADC, Amphenol, etc.)RG174, RG179 and Small Cable Connection BNC/TNC 0.178" (4.5 mm), 0.128" (3.2 mm), 0.068" (1.7 mm) HEXPA2051Common 2-piece and 3-piece BNC/TNC/SMA/SMBRG6 and RG6 Quad, Belden 1694A BNC and CATV "F" Type & HDTV 0.360" (9.1 mm), 0.324" (8.2 mm), 0.068" (1.7 mm) HEXPA2045Common 2-piece and 3-piece BNC/TNC and CATV "F" 2-pieceRG59, RG6 Video CableCATV "F" Type0.346" (8.8 mm), 0.319" (8.2 mm), 0.256" (6.5 mm) HEXPA2042Crimps Ferrules or Sleeves OnlyRG8, RG11, RG213N-Type 0.429" (10.9 mm), 0.100" (2.54 mm), 0.080" (2.03 mm) HEXPA2656Common 2-piece and 3-piece "N"-Type (Kings, ADC, Amphenol, etc.)RG8, RG11, RG213, RG216N-Type, MS39012 Type 0.415" (10.5 mm), 0.095" (2.4 mm) HEXPA2039Crimps Pins and FerrulesBelden 1855A, 1865A, 1505A, 1505F, 1694A, 1694F, 179DTHDYV BNC/TNC True 75 Ω0.178" (4.5 mm), 0.255" (6.5 mm), 0.278" (7.0 mm), 0.068" (1.7 mm), 0.041" (1.0) HEXPA2699Kings, ADC, B&L, Trompeter, Amphenol, SwitchcraftFor Coaxial ConnectorsDie HoldersFor EK50ML120GLFor EK50ML138GLFor Panduit and T&B die setsFor Greenlee CrimpALL ® and Kwik Cycle ® dies; some competitor dies (Ideal)52068455 REV 412© 2020 Greenlee Tools, Inc.RJ45 - 8P8C (8 Pin)Flat/Round, Solid/Stranded RJ45 Unkeyed WE and SSPA2061Western Electric (WE)/Stewart Connector (SS)RJ11 & RJ12 - 6P6C, 6P4C, 6P2C Flat/Round, Solid/Stranded RJ11 & RJ12 Unkeyed WE and SSPA2062Western Electric (WE)/Stewart Connector (SS)RJ22 Handset - 4P4C (4 Pin)Flat/Round, Solid/Stranded4 Pin Handset WE and SSPA2063Western Electric (WE)/Stewart Connector (SS)RJ45 - 8P8C (8 Pin)Flat/Round, Solid/Stranded RJ45 Unkeyed AMP PA2064AMP (Tyco) Inc. Connectors OnlyRJ50 - 10P10C (10 Pin)Flat/Round, Solid/Stranded RJ50 Unkeyed WE and SS PA2068Virginia Plastics (VP)British Telecom 6 Pole PlugFlat/Round, Solid/StrandedBT 6 Pole PA2032British Telecom Plugs OnlyRJ45, Molex Connectors for 5.0 dia. Cable 5.0mm Dia. Round, Shielded (STP)RJ45 STP Molex Connectors,5.0 mm dia. cable PA2673MolexRJ45, AMP/Molex Connectors for dia. Cable6.0mm Dia. Round, Shielded (STP)RJ45 STP AMP & Molex, 6.0 mm dia. cablePA2674AMP (Tyco) Inc. & MolexFor Specialty CrimpersCrimpALL ® Interchangeable Die Sets (cont’d)For Modular PlugsDESCRIPTIONDIE CAT. NO.REMARKSCABLE TYPE CONNECTION CRIMP SIZESCrimpALL ® Interchangeable Die Sets (cont’d)14© 2020 Greenlee Tools, Inc.52068455 REV 452068455 REV 4© 2020 Greenlee Tools, Inc.154455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070©2020 Greenlee Tools, Inc. • An ISO 9001 Company USA Tel: 800-435-0786Fax: 800-451-2632Canada Tel: 800-435-0786Fax: 800-524-2853International Tel: +1-815-397-7070Fax: +1-815-397-9247。
摩克A UC-8100系列Arm Cortex-A8 300 MHz 600 MHz 1 GHz I
UC-8100SeriesArm Cortex-A8300MHz/600MHz/1GHz IIoT gateway with1mini PCIe expansion slot for a wireless module,-10to60°C operating temperatureFeatures and Benefits•Armv7Cortex-A8300/600/1000MHz processor•Dual auto-sensing10/100Mbps Ethernet ports•Rich programmable LEDs and a programmable button for easy installationand maintenance•Debian9open platform•Cybersecurity functionsCertificationsIntroductionThe UC-8100computing platform is designed for embedded data-acquisition applications.The computer comes with one or two RS-232/422/485 serial ports and dual10/100Mbps Ethernet LAN ports,as well as a mini PCIe slot to support cellular modules.These versatile communication capabilities let users efficiently adapt the UC-8100to a variety of complex communications solutions.The UC-8100is built around a Cortex-A8Arm–based processor that has been optimized for use in energy monitoring systems,but is widely applicable to a variety of industrial solutions.With flexible interfacing options,this tiny embedded computer is a reliable and secure gateway for data acquisition and processing at field sites as well as a useful communication platform for many other large-scale deployments.AppearanceFront View Top ViewBottom ViewSpecificationsComputerCPU UC-8131-LX:Armv7Cortex-A8300MHzUC-8132-LX:Armv7Cortex-A8300MHzUC-8162-LX:Armv7Cortex-A8600MHzUC-8112-LX:Armv7Cortex-A81GHzDRAM UC-8112-LX:512MB DDR3UC-8131-LX:256MB DDR3UC-8132-LX:256MB DDR3UC-8162-LX:512MB DDR3Supported OS Linux Debian9kernel4.4(Moxa Industrial Linux)Storage Pre-installed8GB eMMCStorage Slot SD slots x1Computer InterfaceEthernet Ports Auto-sensing10/100Mbps ports(RJ45connector)x2Serial Ports UC-8112-LX:RS-232/422/485ports x2,software-selectable(terminal block)UC-8162-LX:RS-232/422/485ports x2,software-selectable(terminal block)UC-8131-LX:RS-232/422/485ports x1,software-selectable(terminal block)UC-8132-LX:RS-232/422/485ports x2,software-selectable(terminal block) USB2.0USB2.0hosts x1,type-A connectorsExpansion Slots UC-8112-LX:mPCIe slot x1UC-8132-LX:mPCIe slot x1UC-8162-LX:mPCIe slot x1Number of SIMs UC-8112-LX:1UC-8132-LX:1UC-8162-LX:1SIM Format MiniButtons Reset buttonConsole Port RS-232(TxD,RxD,GND),4-pin header output(115200,n,8,1)Ethernet InterfaceMagnetic Isolation Protection 1.5kV(built-in)Serial InterfaceData Bits5,6,7,8Parity None,Even,Odd,Space,MarkStop Bits1,1.5,2Baudrate300bps to921.6kbpsSerial SignalsRS-232TxD,RxD,RTS,CTS,DTR,DSR,DCD,GNDRS-422Tx+,Tx-,Rx+,Rx-,GNDRS-485-2w Data+,Data-,GNDRS-485-4w Tx+,Tx-,Rx+,Rx-,GNDLED IndicatorsSystem Power x1SD slots x1Programmable x3Wireless Signal Strength Cellular/Wi-Fi x3Power ParametersInput Voltage12to24VDCInput Current480mA@12VAC225mA@24VACPower Consumption 5.4WReliabilityAlert Tools RTC(real-time clock)Automatic Reboot Trigger Built-in WDTPhysical CharacteristicsHousing PlasticDimensions101x27x128mm(3.98x1.06x5.04in)Weight224g(0.5lb)Installation DIN-rail mounting,Wall mounting(with optional kit)Environmental LimitsOperating Temperature-10to60°C(14to140°F)Storage Temperature(package included)-20to80°C(-4to-176°F)Ambient Relative Humidity5to95%(non-condensing)Vibration2Grms@IEC60068-2-64,random wave,5-500Hz,1hr per axis(without USB devicesattached)Shock IEC60068-2-27Standards and CertificationsSafety UL60950-1EMC EN55032/24,KC(UC-8162)EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:4kV;Air:8kVIEC61000-4-3RS:80MHz to1GHz:3V/mIEC61000-4-4EFT:Power:1kV;Signal:0.5kVIEC61000-4-5Surge:Power:0.5kVIEC61000-4-6CS:3VIEC61000-4-8PFMFGreen Product RoHS,CRoHS,WEEEMTBFTime UC-8131-LX:1,465,546hrsUC-8132-LX/8162-LX:1,195,173hrsUC-8112-LX:1,149,242hrsStandards Telcordia(Bellcore)StandardWarrantyWarranty Period5yearsDetails See /warrantyPackage ContentsDevice1x UC-8100Series computerCable1x console cableInstallation Kit1x power jackDocumentation1x quick installation guide1x warranty cardDimensionsOrdering InformationModel Name CPU RAM Storage Storage Slots Mini PCIe Socket for Wireless ModuleUC-8131-LX Armv7Cortex-A8300MHz256MB8GB eMMC SD Card–UC-8132-LX Armv7Cortex-A8300MHz256MB8GB eMMC SD Card1UC-8162-LX Armv7Cortex-A8600MHz512MB8GB eMMC SD Card1UC-8112-LX Armv7Cortex-A81GHz512MB8GB eMMC SD Card1 Accessories(sold separately)Power AdaptersPWR-24270-DT-S1Power adapter,input voltage90to264VAC,output voltage24V with2.5A DC loadPower CordsPWC-C7AU-2B-183Power cord with Australian(AU)plug,2.5A/250V,1.83mPWC-C7CN-2B-183Power cord with two-prong China(CN)plug,1.83mPWC-C7EU-2B-183Power cord with Continental Europe(EU)plug,2.5A/250V,1.83mPWC-C7UK-2B-183Power cord with United Kingdom(UK)plug,2.5A/250V,1.83mPWC-C7US-2B-183Power cord with United States(US)plug,10A/125V,1.83mWi-Fi Wireless ModulesWiFi-BGN802.11ac/a/b/g/n Wi-Fi module x1,i-PEX MHF male connector to RP-SMA female connector x2,ANT-WDB-ARM-02x1,M2screw x2AntennasANT-WDB-ARM-02 2.4/5GHz,omni-directional rubber duck antenna,2dBi,RP-SMA(male)ANT-LTE-OSM-03-3m BK Multi-band antenna that covers700-2700MHz.Specially designed for2G,3G,and4G applications.Magnetic mounting is available.ANT-LTE-ASM-05BK LTE stick antenna that covers704-960/1710-2620MHz with a gain of5dBi.ANT-LTEUS-ASM-01GSM/GPRS/EDGE/UMTS/HSPA/LTE,omni-directional rubber duck antenna,1dBiANT-LTE-OSM-06-3m BK MIMO Multi-band antenna that covers700-2700/2400-2500/5150-5850MHz frequencies.Screw-fastenedmounting and full IP67waterproofing are available.ANT-LTE-ASM-04BK LTE Stick antenna that covers704-960/1710-2620MHz providing omnidirectional radiation with a gainof4.5dBi.ANT-GPS-OSM-05-3M BK Active GPS antenna,26dBi,1572MHz,L1band antenna for GPSCablesCRF-MHF/SMA(M)-14.2i-PEX MHF male connector on a Wi-Fi module to RP-SMA female connector for installing a Wi-FiantennaCBL-F9DPF1x4-BK-100Console cable with4-pin connector,1mWall-Mounting KitsWALLMOUNT-8100-01Wall-mounting kit for the UC-8100with screws©Moxa Inc.All rights reserved.Updated Jan21,2020.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
Electrolux 型号汇总表
354808
Elux S E Asia 马来西亚 125904 Elux S E Asia 马来西亚 221909 滴漏咖啡壶 Elux S E Asia 马来西亚 361506/ECM4000-SEA-2 Elux S E Asia 马来西亚 134209 多士炉 Elux S E Asia ITV Elux S E Asia ITV 多士炉 磨豆咖啡壶 Elux S E Asia ITV Elux S E Asia ITV 水煲 电烤箱 滴漏咖啡壶 Elux S E Asia ITV 多士炉 Elux Taiwan 125906 134210 232410 221910
Elux EU Elux EU Elux EU Elux EU 滴漏咖啡壶 Elux EU 滴漏咖啡壶 Elux EU Elux EU 面包机 Elux EU 面包机 压力咖啡壶 Elux EU 压力咖啡壶 El士炉 Elux LAM Elux LAM 巴西/127V 巴西/220V Group 2 阿根廷 巴西/127V Group 2 巴西/220V Group 2 Group 2 巴西/220V 巴西/220V 巴西/127V 巴西/127V Group 2 Group 2 阿根廷 阿根廷 智利 智利
361507/ECM4000-SEA-1 ECM4000 134205 221905 361504 ETS4000 EEK4000 ECM4000
Elux Taiwan 水煲 滴漏咖啡壶 Elux Taiwan
产品名称 多士炉 多士炉 多士炉 多士炉 多士炉
客户名称 Elux EU Elux EU Elux EU Elux EU Elux EU
135905 135906 135909 360613 360605 360618 360606 360619 360620 354703 354803 354708 354807 354704 354804 354709 354811 354710 354812
炉子产品说明书
Serie 6, Forno da incasso, 60 x 60cm, AcciaioHBA257BS0Accessori integrati1 x Griglia combinata, 1 x Leccarda universale smaltataAccessori opzionaliHEZ538000 Guide telescopiche clip a 1 livello, HEZ538200 Guide telescopiche a 2 livelli, HEZ538S00 Guide telescop. a 2 livelli+1 guida clip, HEZ625071 Teglia per grigliare adatta a pirolisi,HEZ633001 Coperchio per tegame professionale, HEZ633070 Tegame professionale, HEZ634000 Griglia combinata 455x375x31 mm (LxPxA), HEZ636000 Leccarda in vetro 455x364x30 mm (LxPxA), HEZ638000 Guide telescopiche clip a 1 livello, HEZ638200 Set griglie telesc.2 liv.ad pl, HEZ638300 Set griglie telesc.3 liv.ad pl, HEZ660050 Accessory, HEZ664000 Griglia combinata 455x375x59 mm (LxPxA), HEZ915003 Pirofila in vetro con coperchio 5,4 l., HEZG0AS00 Cavo di collegamento 3m, HEZ317000 Teglia per pizza, HEZ327000 Pietra per pane e pizza, HEZ333001 Coperchio per leccarda extra profonda, HEZ530000 2 leccarde slim 455x188x39 mm (LxPxA), HEZ531000 Leccarda bassa 455x375x30 mm (LxPxA), HEZ531010 Leccarda antiaderen 455x375x30mm (LxPxA), HEZ532000 Leccarda profonda 455x375x38 mm (LxPxA), HEZ532010 Leccarda antiaderen 455x400x38mm (LxPxA),HEZ533000 Leccarda profonda 455x375x81 mm (LxPxA)Forno da incasso di moderno ed elegante design con programmi automatici di cottura: per preparare piatti perfetti.• Programmi automatici di cottura: cucinare sarà semplicissimo grazie ai programmi con impostazioni già preselezionate.• Comode manopole a scomparsa push-pull: per una pulizia piùsemplice del panello frontale.• EcoClean Direct: facile pulizia grazie a un rivestimento che dissolve il grasso durante la cottura.Dati tecniciTipologia costruttiva del prodotto: .....................................Da incasso Sistema di pulizia: ....Idrolisi, 3 pannelli catalitici, 3 pannelli catalitici Dimensioni del vano per l'installazione (AxLxP): 585-595 x 560-568 x 550 mmDimensioni (AxLxP): ............................................595 x 594 x 548 mm Dimensioni del prodotto imballato (AxLxP): .......675 x 660 x 690 mm Materiale del cruscotto: ..............................................................vetro Materiale porta: ..........................................................................vetro Peso netto: ..............................................................................34.1 kg Volume utile: .................................................................................71 l Metodo di cottura: .Grill a superficie grande, Aria calda delicata, aria calda, Riscaldamento statico, Funzione pizza, riscaldamento inferiore, grill ventilatoMateriale della cavità: .................................................................Altro Regolazione della temperatura: ..........................................Meccanico Numero di luci interne: (1)Lunghezza del cavo di alimentazione elettrica: .....................120.0 cm Codice EAN: (4242005056309)Numero di vani - (2010/30/CE): (1)Classe di efficienza energetica: .........................................................A Energy consumption per cycle conventional (2010/30/EC): ........0.97 kWh/cycleEnergy consumption per cycle forced air convection (2010/30/EC):0.81 kWh/cycleIndice di efficienza energetica (2010/30/CE): ..........................95.3 % Potenza: ..................................................................................3400 W Corrente: .....................................................................................16 A Tensione: .............................................................................220-240 V Frequenza: ...........................................................................60; 50 Hz Tipo di spina: ..........................................................................Schuko Accessori inclusi: .......1 x Griglia combinata, 1 x Leccarda universale smaltataSerie 6, Forno da incasso, 60 x 60cm, AcciaioHBA257BS0Forno da incasso di moderno ed elegante design con programmi automatici di cottura: per preparare piatti perfetti.- Eco Clean: soffitto, parete posteriore, pareti laterale- Programma di pulizia EcoClean- Display digitale LCD a colore bianco- Programmi automatici: 10- Orologio elettronico con impostazione inizio e fine cottura- Raggiungimento temperatura- Illuminazione interna alogena- Volume cavità: 71 l- <8088brandlookup_nl(TUE,- KIN, SIK, SIB, REW, STA, TKS)>- Ventola tangenziale di raffreddamento- Assorbimento massimo elettrico: 3.4 kW- Dimensioni apparecchio (AxLxP): 595 mm x 594 mm x 548 mm- Dimensioni nicchia (AxLxP): 560 mm - 568 mm x 585 mm - 595 mm x 550 mm- Si prega di fare riferimento alle quote d'installazione mostrate nel disegno tecnicoEtichetta energetica- Classe di efficienza energetica (acc. EU Nr. 65/2014): A(in una scala di classi di efficienza energetica da A+++ a D)- Consumo energetico per ciclo durante funzionamento convenzionale:0.97 kWh- Consumo energetico per ciclo durante funzionamento ventilato:0.81 kWh- Numero di cavità: 1 Tipo di alimentazione: elettrica Volume della cavità:71 lDimensioniSerie 6, Forno da incasso, 60 x 60cm, Acciaio HBA257BS0。
SCI Dual NPN Bias Resistor Transistors 数据手册说明书
MUN5211DW1,NSBC114EDXV6,NSBC114EDP6Dual NPN Bias Resistor TransistorsR1 = 10 k W, R2 = 10 k WNPN Transistors with Monolithic Bias Resistor NetworkThis series of digital transistors is designed to replace a single device and its external resistor bias network. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space.Features•Simplifies Circuit Design•Reduces Board Space•Reduces Component Count•S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements;AEC-Q101 Qualified and PPAP Capable*•These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS CompliantMAXIMUM RATINGS(T A = 25°C, common for Q1 and Q2, unless otherwise noted)Rating Symbol Max Unit Collector-Base Voltage V CBO50Vdc Collector-Emitter Voltage V CEO50Vdc Collector Current − Continuous I C100mAdc Input Forward Voltage V IN(fwd)40Vdc Input Reverse Voltage V IN(rev)10Vdc Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. ORDERING INFORMATIONDevice Package Shipping†MUN5211DW1T1G,SMUN5211DW1T1G*SOT−3633,000 / Tape & Reel NSVMUN5211DW1T2G*SOT−3633,000 / Tape & Reel NSVMUN5211DW1T3G*SOT−36310,000 / Tape & Reel NSBC114EDXV6T1G,NSVBC114EDXV6T1G*SOT−5634,000 / Tape & Reel NSBC114EDXV6T5G SOT−5638,000 / Tape & ReelNSBC114EDP6T5G SOT−9638,000 / Tape & Reel†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging SpecificationsMARKING DIAGRAMSPIN CONNECTIONS7A M GG17A/A=Specific Device CodeM=Date Code*G=Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending up-on manufacturing location.SOT−363CASE 419BSOT−563CASE 463A(1)(2)(3)(6)(5)(4)SOT−963CASE 527ADM1A7A M GG16THERMAL CHARACTERISTICSCharacteristic Symbol Max Unit MUN5211DW1 (SOT−363) ONE JUNCTION HEATEDTotal Device DissipationT A = 25°C(Note1)(Note2)Derate above 25°C(Note1)(Note2)P D1872561.52.0mWmW/°CThermal Resistance,(Note1) Junction to Ambient(Note2)R q JA670490°C/WMUN5211DW1 (SOT−363) BOTH JUNCTION HEATED (Note3)Total Device DissipationT A = 25°C(Note1)(Note2)Derate above 25°C(Note1)(Note2)P D2503852.03.0mWmW/°CThermal Resistance,Junction to Ambient(Note1)(Note2)R q JA493325°C/WThermal Resistance, Junction to Lead(Note1)(Note2)R q JL188208°C/WJunction and Storage Temperature Range T J, T stg−55 to +150°C NSBC114EDXV6 (SOT−563) ONE JUNCTION HEATEDTotal Device DissipationT A = 25°C(Note1)Derate above 25°C(Note1)P D3572.9mWmW/°CThermal Resistance,Junction to Ambient(Note1)R q JA350°C/WNSBC114EDXV6 (SOT−563) BOTH JUNCTION HEATED (Note3)Total Device DissipationT A = 25°C(Note1)Derate above 25°C(Note1)P D5004.0mWmW/°CThermal Resistance,Junction to Ambient(Note1)R q JA250°C/WJunction and Storage Temperature Range T J, T stg−55 to +150°C NSBC114EDP6 (SOT−963) ONE JUNCTION HEATEDTotal Device DissipationT A = 25°C(Note4)(Note5)Derate above 25°C(Note4)(Note5)P D2312691.92.2MWmW/°CThermal Resistance,Junction to Ambient(Note4)(Note5)R q JA540464°C/WNSBC114EDP6 (SOT−963) BOTH JUNCTION HEATED (Note3)Total Device DissipationT A = 25°C(Note4)(Note5)Derate above 25°C(Note4)(Note5)P D3394082.73.3MWmW/°CThermal Resistance,Junction to Ambient(Note4)(Note5)R q JA369306°C/WJunction and Storage Temperature Range T J, T stg−55 to +150°C 1.FR−4 @ Minimum Pad.2.FR−4 @ 1.0×1.0 Inch Pad.3.Both junction heated values assume total power is sum of two equally powered channels.4.FR−4 @ 100mm2, 1 oz. copper traces, still air.5.FR−4 @ 500mm2, 1 oz. copper traces, still air.ELECTRICAL CHARACTERISTICS (T A=25°C, common for Q1 and Q2, unless otherwise noted)Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICSCollector-Base Cutoff Current (V CB=50V, I E=0)I CBO−−100nAdcCollector-Emitter Cutoff Current (V CE=50V, I B=0)I CEO−−500nAdcEmitter-Base Cutoff Current (V EB=6.0V, I C=0)I EBO−−0.5mAdcCollector-Base Breakdown Voltage (I C=10m A, I E=0)V(BR)CBO50−−VdcCollector-Emitter Breakdown Voltage (Note6) (I C=2.0mA, I B=0)V(BR)CEO50−−VdcON CHARACTERISTICSDC Current Gain (Note6) (I C=5.0mA, V CE=10V)h FE3560−Collector-Emitter Saturation Voltage (Note6) (I C=10mA, I B=0.3mA)V CE(sat)−−0.25VInput Voltage (Off)(V CE=5.0V, I C=100m A)V i(off)− 1.2−VdcInput Voltage (On)(V CE=0.2V, I C=10mA)V i(on)−2.0−VdcOutput Voltage (On)(V CC=5.0V, V B=2.5V, R L=1.0k W)V OL−−0.2VdcOutput Voltage (Off)(V CC=5.0V, V B=0.5V, R L=1.0k W)V OH4.9−−Vdc Input Resistor R17.01013k W Resistor Ratio R1/R20.8 1.0 1.2Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.6.Pulsed Condition: Pulse Width=300ms, Duty Cycle ≤2%.Figure 1. Derating CurveAMBIENT TEMPERATURE (°C)PD,POWERDISSIPATION(mW)(1) SOT−363; 1.0×1.0 Inch Pad(2) SOT−563; Minimum Pad(3) SOT−963; 100mm2, 1 oz. Copper TraceTYPICAL CHARACTERISTICS MUN5211DW1, NSBC114EDXV6Figure 2. V CE(sat) vs. I CI C , COLLECTOR CURRENT (mA)1010.1Figure 3. DC Current GainFigure 4. Output Capacitance 0.10.010.001I C , COLLECTOR CURRENT (mA)100010010I C , COLLECTOR CURRENT (mA)Figure 5. Output Current vs. Input Voltage1010.1V in , INPUT VOLTAGE (V)Figure 6. Input Voltage vs. Output Current3.62.80.41.20V R , REVERSE VOLTAGE (V)V C E (s a t ), C O L L E C T O R −E M I T T E R V O L T A G E (V )h F E , D C C U R R E N T G A I N0.81.62.02.43.2C o b , O U T P U T C A P A C I T A N C E (p F )I C , C O L L E C T O R C U R R E N T (m A )V i n , I N P U T V O L T A G E (V )TYPICAL CHARACTERISTICSNSBC114EDP6Figure 7. V CE(sat) vs. I CFigure 8. DC Current GainI C , COLLECTOR CURRENT (mA)I C , COLLECTOR CURRENT (mA)0.010.11Figure 9. Output CapacitanceFigure 10. Output Current vs. Input VoltageV R , REVERSE VOLTAGE (V)V in , INPUT VOLTAGE (V)Figure 11. Input Voltage vs. Output CurrentI C , COLLECTOR CURRENT (mA)V C E (s a t ), C O L L E C T O R −E M I T T E R V O L T A G E (V )h F E , D C C U R R E N T G A I NC o b , O U T P U T C A P A C I T A N C E (p F )I C , C O L L E C T O R C U R R E N T (m A )V i n , I N P U T V O L T A G E (V )SC −88/SC70−6/SOT −363CASE 419B −02ISSUE YDATE 11 DEC 2012SCALE 2:1NOTES:1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.2.CONTROLLING DIMENSION: MILLIMETERS.3.DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH,PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRU-SIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END.4.DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY AND DATUM H.5.DATUMS A AND B ARE DETERMINED AT DATUM H.6.DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP .7.DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION.ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDI-TION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OF THE FOOT.XXXM G G XXX = Specific Device Code M = Date Code*G = Pb −Free Package GENERICMARKING DIAGRAM*16STYLES ON PAGE 2DIM MIN NOM MAX MILLIMETERS A −−−−−− 1.10A10.00−−−0.10dddb 0.150.200.25C 0.080.150.22D 1.80 2.00 2.20−−−−−−0.0430.000−−−0.0040.0060.0080.0100.0030.0060.0090.0700.0780.086MIN NOM MAX INCHES0.100.004E1 1.15 1.25 1.35e 0.65 BSC L 0.260.360.462.00 2.10 2.200.0450.0490.0530.026 BSC0.0100.0140.0180.0780.0820.086(Note: Microdot may be in either location)*Date Code orientation and/or position may vary depending upon manufacturing location.*For additional information on our Pb −Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*DIMENSIONS: MILLIMETERS0.306XRECOMMENDEDSIDE VIEWEND VIEWPLANEDETAIL AE A20.700.90 1.000.0270.0350.039L20.15 BSC 0.006 BSC aaa 0.150.006bbb 0.300.012ccc 0.100.0046X*This information is generic. Please refer to device data sheet for actual part marking.Pb −Free indicator, “G” or microdot “G ”, may or may not be present. Some products may not follow the Generic Marking.MECHANICAL CASE OUTLINEPACKAGE DIMENSIONSSTYLE 1:PIN 1.EMITTER 22.BASE 23.COLLECTOR 14.EMITTER 15.BASE 16.COLLECTOR 2STYLE 3:CANCELLEDSTYLE 2:CANCELLEDSTYLE 4:PIN 1.CATHODE2.CATHODE3.COLLECTOR4.EMITTER5.BASE6.ANODESTYLE 5:PIN 1.ANODE2.ANODE3.COLLECTOR4.EMITTER5.BASE6.CATHODESTYLE 6:PIN 1.ANODE 22.N/C3.CATHODE 14.ANODE 15.N/C6.CATHODE 2STYLE 7:PIN 1.SOURCE 22.DRAIN 23.GATE 14.SOURCE 15.DRAIN 16.GATE 2STYLE 8:CANCELLEDSTYLE 11:PIN 1.CATHODE 22.CATHODE 23.ANODE 14.CATHODE 15.CATHODE 16.ANODE 2STYLE 9:PIN 1.EMITTER 22.EMITTER 13.COLLECTOR 14.BASE 15.BASE 26.COLLECTOR 2STYLE 10:PIN 1.SOURCE 22.SOURCE 13.GATE 14.DRAIN 15.DRAIN 26.GATE 2STYLE 12:PIN 1.ANODE 22.ANODE 23.CATHODE 14.ANODE 15.ANODE 16.CATHODE 2STYLE 13:PIN 1.ANODE2.N/C3.COLLECTOR4.EMITTER5.BASE6.CATHODE STYLE 14:PIN 1.VREF2.GND3.GND4.IOUT5.VEN6.VCCSTYLE 15:PIN 1.ANODE 12.ANODE 23.ANODE 34.CATHODE 35.CATHODE 26.CATHODE 1STYLE 17:PIN 1.BASE 12.EMITTER 13.COLLECTOR 24.BASE 25.EMITTER 26.COLLECTOR 1STYLE 16:PIN 1.BASE 12.EMITTER 23.COLLECTOR 24.BASE 25.EMITTER 16.COLLECTOR 1STYLE 18:PIN 1.VIN12.VCC3.VOUT24.VIN25.GND6.VOUT1STYLE 19: PIN 1.I OUT2.GND3.GND4.V CC5.V EN6.V REF STYLE 20:PIN 1.COLLECTOR2.COLLECTOR3.BASE4.EMITTER5.COLLECTOR6.COLLECTORSTYLE 22:PIN 1.D1 (i)2.GND3.D2 (i)4.D2 (c)5.VBUS6.D1 (c)STYLE 21:PIN 1.ANODE 12.N/C3.ANODE 24.CATHODE 25.N/C6.CATHODE 1STYLE 23:PIN 1. Vn2.CH13.Vp4.N/C5.CH26.N/CSTYLE 24:PIN 1.CATHODE2.ANODE3.CATHODE4.CATHODE5.CATHODE6.CATHODESTYLE 25:PIN 1.BASE 12.CATHODE3.COLLECTOR 24.BASE 25.EMITTER6.COLLECTOR 1STYLE 26:PIN 1.SOURCE 12.GATE 13.DRAIN 24.SOURCE 25.GATE 26.DRAIN 1STYLE 27:PIN 1.BASE 22.BASE 13.COLLECTOR 14.EMITTER 15.EMITTER 26.COLLECTOR 2STYLE 28:PIN 1.DRAIN2.DRAIN3.GATE4.SOURCE5.DRAIN6.DRAINSTYLE 29:PIN 1.ANODE2.ANODE3.COLLECTOR4.EMITTER5.BASE/ANODE6.CATHODESC−88/SC70−6/SOT−363CASE 419B−02ISSUE YDATE 11 DEC 2012STYLE 30:PIN 1.SOURCE 12.DRAIN 23.DRAIN 24.SOURCE 25.GATE 16.DRAIN 1Note: Please refer to datasheet forstyle callout. If style type is not calledout in the datasheet refer to the devicedatasheet pinout or pin assignment.SOT −563, 6 LEADCASE 463A ISSUE HDATE 26 JAN 2021SCALE 4:16MECHANICAL CASE OUTLINEPACKAGE DIMENSIONSSOT −563, 6 LEADCASE 463A ISSUE HDATE 26 JAN 2021XX = Specific Device Code M = Month Code G = Pb −Free PackageXX MG GENERICMARKING DIAGRAM*1*This information is generic. Please refer todevice data sheet for actual part marking.Pb −Free indicator, “G” or microdot “G ”, may or may not be present. Some products maynot follow the Generic Marking.SOT −963CASE 527AD −01ISSUE EDATE 09 FEB 2010SCALE 4:1GENERICMARKING DIAGRAM*X = Specific Device Code M = Month Code*This information is generic. Please refer to device data sheet for actual part marking.Pb −Free indicator, “G” or microdot “ G ”,may or may not be present.DIM MIN NOM MAX MILLIMETERS A 0.340.370.40b 0.100.150.20C 0.070.120.17D 0.95 1.001.05E 0.750.800.85e 0.35 BSC 0.95 1.00 1.05HE ANOTES:1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.2.CONTROLLING DIMENSION: MILLIMETERS3.MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEADTHICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.4.DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS.XM 1STYLE 1:PIN 1.EMITTER 12.BASE 13.COLLECTOR 24.EMITTER 25.BASE 26.COLLECTOR 1STYLE 2:PIN 1.EMITTER 12.EMITTER23.BASE 24.COLLECTOR 25.BASE 16.COLLECTOR 1STYLE 3:PIN 1.CATHODE 12.CATHODE 13.ANODE/ANODE 24.CATHODE 25.CATHODE 26.ANODE/ANODE 1STYLE 4:PIN 1.COLLECTOR2.COLLECTOR3.BASE4.EMITTER5.COLLECTOR6.COLLECTOR STYLE 6:PIN 1.CATHODE2.ANODE3.CATHODE4.CATHODE5.CATHODE6.CATHODE STYLE 5:PIN 1.CATHODE2.CATHODE3.ANODE4.ANODE5.CATHODE6.CATHODE STYLE 7:PIN 1.CATHODE2.ANODE3.CATHODE4.CATHODE5.ANODE6.CATHODE STYLE 8:PIN 1.DRAIN2.DRAIN3.GATE4.SOURCE5.DRAIN6.DRAINSTYLE 9:PIN 1.SOURCE 12.GATE 13.DRAIN 24.SOURCE 25.GATE 26.DRAIN 1STYLE 10:PIN 1.CATHODE 12.N/C3.CATHODE 24.ANODE 25.N/C6.ANODE 1TOP VIEW SIDE VIEWDIMENSIONS: MILLIMETERSRECOMMENDED MOUNTING FOOTPRINTL 0.19 REF L20.050.100.156X MECHANICAL CASE OUTLINEPACKAGE DIMENSIONSPUBLICATION ORDERING INFORMATIONTECHNICAL SUPPORT North American Technical Support:Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910LITERATURE FULFILLMENT :Email Requests to:*******************onsemi Website: Europe, Middle East and Africa Technical Support:Phone: 00421 33 790 2910For additional information, please contact your local Sales Representative ◊。
RECOM 电源 RACAC DC 转换器 PA-1 产品说明书
RAC AC/DC Conver er4 Watt Single OutputRAC04-K/277IEC60950-1 certified IEC62368-1certified UL62368-1 certifiedCSA/CAN C22.2 No. 62368-1-14 certified EN62368-1 compliant EN60335-1 compliant EN61010-1 compliant IEC/EN61558-1 compliant IEC/EN61558-2-16 compliant EN55032 compliant EN55024 compliantEN55014-1 /-2 compliant IEC/EN61204-3 compliant FCC 47 Part 15CB ReportSelection GuidePart Input Output Output Efficiency Max. CapacitiveNumber Voltage Range Voltage Current (1) typ. (2)Load [(VAC] [VDC] [mA] [%] [µF)RAC04-05SK/277 80-305 5 800 76 7200RAC04-12SK/277 80-305 12 333 78 1000RAC04-15SK/277 80-305 15 267 80 820RAC04-24SK/277 80-305 24 167 80 220On RequestRAC04-3.3SK/277 80-305 3.3 1200 73 10000Notes:Note1: Refer to “Line Derating“ graphNote2: Measured @ 230VAC/50Hz at +25°C with constant resistant mode at full loadDescriptionThe RAC04-K/277 series delivers an uncompromising 4 watts of continuous output power (6W peak) in harsh industrial and household environments. These modules deliver full load output power from -40°C to 75°C across the entire input range of 80VAC to 305VAC and are certified for operation with power derating up to 90°C air ambient. A peak load capability of up to 150% supports dynamic power demands of applications. This series of fully encapsulated AC/DC modules is a complete solution without the need for external components which supports Ecodesign Lot 6 standby mode operation for worldwide applications in automation, industry 4.0, IoT, household, and home automation. With international safety and EMC certifications for industrial, domestic, ITE, and household applications, these are some of the most versatile power modules on the market. Due to their reinforced class II installation rating for floating outputs and their significantly wide margin to class B emissions compliance without external components and a certified 4kV AC (5.25 kV DC) isolation, these are the easiest to use modular power solutions in the industry.nom. Output Power nom. Output VoltageRAC04-__ SK/277Model NumberingS ingleE224736Ordering Examples RAC04-05SK/277 = 5Vout Single RAC04-12SK/277 =12VoutSingleSpecifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)REGULATIONSParameterCondition ValueOutput Accuracy ±1.0% typ.Line Regulation ±0.5% typ.Load Regulation 1.0% typ.Transient Response25% load step changerecovery time4.0% max.500µs10.5-0.5-1D e v i a t i o n [%]0102030405060708090100Output Load [%]10.50-0.5-1D e v i a t i o n [%]0102030405060708090100Output Load [%]RAC04-05SK/277RAC04-12SK/277Deviation vs. Load(80-305VAC)Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)10.5-0.5-1D e v i a t i o n [%]0102030405060708090100Output Load [%]10.50-0.5-1D e v i a t i o n [%]0102030405060708090100Output Load [%]RAC04-15SK/277RAC04-24SK/277Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)SAFETY AND CERTIFICATIONSCertificate Type Report / File Number StandardAudio/video, information and communication technology equipment - Safety requirements E224736UL62368-1:2014, 2nd Edition CAN/CSA C22.2 No. 62368-1-14, 2nd EditionInformation Technology Equipment, General Requirements for Safety (CB)E491408-A6-CB-1IEC60950-1:2005 + A2:2013, 2nd EditionInformation Technology Equipment, General Requirements for Safety EN60950-1:2006 + A2:2013 Audio/video, information and communication technology equipment - Safety requirements (CB)E491408-A6011-CB-1IEC62368-1:2014, 2nd Edition Audio/video, information and communication technology equipment - Safety requirements (LVD)EN62368-1:2014 + A11:2017 Household and similar electrical appliances - Safety - Part 1: General requirements (LVD)EN60335-1:2012 + A1:2018Safety of power transformers, power supplies, reactors and similar products for supply voltages up to 1100 V IEC61558-1:2005 2nd Edition + A1:2009EN61558-1:2005 + A1:2009Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)Certificate Type Report / File Number StandardSafety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units (LVD)IEC61558-2-16:2009 + A1:2013, 1st EditionEN61558-2-16:2009 + A1:2013Safety requirements for electrical equipment for measurement, control and laboratory use -Part 1: General requirements (LVD)EN61010-1:2010 RoHS2RoHs-2011/65/EU + AM-2015/863 EMC Compliance (Household)Report / File Number Standard / Criterion Electromagnetic compatibility - Requirements for household appliances, electric tools and similarapparatus - Part 1: Emission (8)EN55014-1:2006 + A2:2011 Electromagnetic compatibility - Requirements for household appliances, electric tools and similarapparatus - Part 2: ImmunityEN55014-2:2015 ESD Electrostatic discharge immunity test Air ±8kV; Contact ±4kV IEC61000-4-2:2008, Criteria B Fast Transient and Burst Immunity AC Power Port: ±1.0kV IEC61000-4-4:2012, Criteria B Surge Immunity AC Power Port: L-N ±1.0kV IEC61000-4-5:2014, Criteria B Immunity to conducted disturbances, induced by radio-frequency fields AC Power Port: 3V EN61000-4-6:2013, Criteria AVoltage Dips and Interruptions Voltage Dips: 100%60%EN61000-4-11:2004, Criteria CEN61000-4-11:2004, Criteria CEMC Compliance (Multimedia)Condition Standard / Criterion Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility IEC/EN61204-3:2000, Class B Electromagnetic compatibility of multimedia equipment - Emission requirements (9)EN55032:2015, Class B Information technology equipment - Immunity characteristics - Limits and methods of measurement EN55024:2010 + A1:2015 ESD Electrostatic discharge immunity test Air ±2,4,8kV; Contact ±4kV IEC61000-4-2:2008, Criteria BRadiated, radio-frequency, electromagnetic field immunity test10V/m (80 - 1000MHz)IEC61000-4-3, Criteria A 3V/m (1800MHz, 2600Mhz,3500MHz, 5000MHz)IEC61000-4-3:2006 + A2:2010, Criteria AFast Transient and Burst Immunity AC Power Port: ±2.0kV IEC61000-4-4, Criteria B AC Power Port: ±1.0kV IEC61000-4-4:2012, Criteria ASurge Immunity AC Power Port: L-N ±1.0kV IEC61000-4-5:2014, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields AC Power Port: 10V IEC61000-4-6, Criteria AVoltage Dips and Interruptions Voltage Dips:100% / 30%70%40%IEC61000-4-11:2004, Criteria AIEC61000-4-11:2004, Criteria BIEC61000-4-11:2004, Criteria C Interruptions: >95%IEC61000-4-11:2004, Criteria ALimits of Voltage Fluctuations & Flicker EN61000-3-3:2013 Limitations on the amount of electromagnetic interference allowed from digital and electronicdevicesFCC 47 Part 15 Subpart B:2017, Class B Notes:Note9: If output is connected to GND, please contact RECOM tech support for further informationDIMENSION and PHYSICAL CHARACTERISTICSParameter Type ValueMaterial case/baseplatepottingPCBplastic, (UL94 V-0)silicone, (UL94 V-0)FR4, (UL94 V-0)Dimension (LxWxH)36.7 x 27.2 x 17.4mm Weight30g typ.Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)PACKAGING INFORMATIONParameter Type Value Packaging Dimension (LxWxH)tube506.4 x 29.8 x 25.5mm Packaging Quantity12pcs Storage Temperature Range-40°C to +85°C Storage Humidity non-condensing20% to 90% RH max.The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause。
Eaton Aerospace产品说明书
Manual (ATA Number)CurrentRevisionRevisionDateEaton PartNumberDescription OEM Application63-41-10Rev 1Mar 31/981H118-45QDM Signal Conditioner Agusta Westland EH10163-41-20Initial Feb 15/02S247-4Sight Gauge Agusta AB13979-22-06Rev 2Jul 30/991A475Chip Collector GE CF679-24-01Reissue Apr 15/94A693Full Flow Debris Monitor Textron Lycoming ALF502/ LF507 79-22-06Rev 2Jul 30/991A1869Chip Collector GE CF679-24-01Reissue Apr 15/941D1934Full Flow Debris Monitor Textron Lycoming ALF502/ LF507 79-24-01Reissue Apr 15/941D2316Full Flow Debris Monitor Textron Lycoming ALF502/ LF507 79-22-11Initial Feb 1/941J2496Power Module Israel Cobra79-23-00Initial Feb 28/941F2870-3Lubriclone Allison AE210079-21-39Rev 2Sep 30/991F2976SeriesDMS Separator Hispano-Suiza GE9079-21-38Rev 1Aug 31/991G2977SeriesDMS Sensor Hispano-Suiza GE9079-21-41Rev 1Apr 30/991H2983-3DMS Conditioner Hispano-Suiza GE9049-90-30Initial Jan 18/082E3249Level Sensor Honeywell36-150 APU79-21-03Rev 1May 24/96VB3447Chip Detector Rolls-Royce RB21179-21-04Rev 1May 10/96VA3503Chip Detector Rolls-Royce RB21179-21-05Rev 2Feb 15/01VA3508Chip Detector Rolls-Royce BR710, TRENT700/80079-22-45Rev 3Nov 1/99VB3521-2Chip Detector Rolls-Royce V250079-22-06Rev 2Jul 30/99B4354-1Chip Detector GE CF679-22-08Rev 1Mar 31/99B4901Chip Detector w/Self-ClosingValve Pratt & Whitney PW2000F117PW-10079-22-14Rev 1May 9/08B4902Chip Detector w/Self-ClosingValvePratt & Whitney PW400079-22-14Rev 1May 9/08B4903Chip Detector w/Self-ClosingValvePratt & Whitney PW400079-23-00Initial Feb 28/942Z6468Self-Closing Valve Allison AE2100 79-22-02Rev 2Nov 19/991A6473Chip Detector w/Self-ClosingValvePratt & Whitney PW4000 79-22-03Initial Jul 15/931B6488Chip Detector w/ Self-ClosingValvePratt & Whitney PW400079-22-02Rev 2Nov 19/991A6505Chip Detector w/Self-ClosingValvePratt & Whitney PW4000 79-21-51Rev 2Nov 17/061D6549Debris Monitor Hispano-Suiza CFM56 79-21-52Rev 1Oct 20/001B6550Chip Detector Hispano-Suiza CFM56 79-31-10Rev 2May 9/944J6588Electric Chip Detector GE LM6000 79-22-04Initial Oct 15/921A6618Chip Collector w/Self-ClosingValveGarrett APU79-22-10Initial Dec 15/971A6794Chip Collector w/Self-ClosingValveIAE V250079-23-00Initial Feb 28/941B6820Chip Detector Allison AE2100 79-23-05Initial Jun 1/981F6875Lubriclone Rolls-Royce AE1107C 79-22-07Initial Mar 15/951A6902Chip Collector w/Self-ClosingValvePratt & Whitney JT9D79-22-07Initial Mar 15/951A6925Chip Collector w/Self-ClosingValvePratt & Whitney JT9D79-22-09Rev 2Jan 3/001A6945Chip Collector w/Self-ClosingValvePratt & Whitney JT8D79-22-09Rev 2Jan 3/001A6947Chip Collector w/Self-ClosingValvePratt & Whitney JT8D79-22-09Rev 2Jan 3/001A6948Chip Collector w/Self-ClosingValvePratt & Whitney JT8D79-22-12Initial Sep 15/961A7091Chip Collector w/Self-ClosingValvePratt & Whitney JT9D79-22-16Initial Dec 15/971A7476Chip Collector w/Self-ClosingValveRolls-Royce BR715Manual (ATA Number)CurrentRevisionRevisionDateEaton PartNumberDescription OEM Application77-42-03Initial Jan 03/001J7589Smart Zapper Power Module Westland Seaking77-42-04Initial Jan 03/001Z7628Smart Zapper Maint. Panel Westland Seaking79-22-16Initial Dec 15/971A7802Chip Collector w/Self-ClosingValveRolls-Royce BR71579-22-46Rev 1Jan 29/041B7802Chip Detector Rolls-Royce TRENT 500/900 79-22-47Initial Dec 29/062Z7802DMS Inhibitor Rolls-Royce TRENT 500/900 63-41-20Initial Feb 15/021D7829Debris Monitor Agusta AB13963-41-20Initial Feb 15/021B7830Chip Detector w/Adapter Agusta AB13963-41-20Initial Feb 15/022A7831Oil Filler Agusta AB13963-41-20Initial Feb 15/021B7839Chip Detector w/SCV Agusta AB13963-41-20Initial Feb 15/022A7840-1Oil Filler Agusta AB13963-41-20Initial Feb 15/022B7841Vented Breather Agusta AB13963-41-21Initial Feb 15/021J7895Power Module Agusta AB13979-11-24Initial Apr 14/041F8550DMS Separator Hispano-Suiza GE90-115B63-41-20Initial Feb 15/022F8566E/O Sensor Agusta AB13979-36-13Initial Jun 30/061F8664-4ODM Separator GE GP7200。
东莞科尼盛电子有限公司铝电解电容商品说明书
规格承认书Specification for approval 客户名称:（Customer Name）产品名称: 铝电解电容（Product Name） Aluninum Electrolytic Capacitor 客户料号：（Customer part number）科尼盛料号： 01EC1187（KNSCHA number） 01EC1187型号规格: KNSCHA SHG 35V470μF Φ10*20L （Specifications） KNSCHA SHG 35V470μF Φ10*20L制 造(Manufacture)客 户(Customer)Approval Approval拟 制(Fiction)审 核(Chief)核 准(Approval)检 验(Inspect)审 核(Chief)核 准(Approval)东莞市科尼盛电子有限公司DONG GUAN KNSCHA ELECTRONICS CO.,LTD.No. 8th floor, A3 building, R&D center (Phase I),Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City. TEL:0769-8369806781035570FAX************** Email：***********************:SHG SeriesAluminum Electrolytic Capacitors1.Operating Temp. Range2.Electrical CharacteristicsSee Table 1.3.DimensionsФd=0.05 Tinned copper-ply wireSafety Ventφ6.3 or overФD+αmax4.MarkingFollowing items are printed with white color on coffee color sleeve①Rated voltage & Nominal Capacitance ②Polarity (negative) 35V ③Trade Mark 470μF ④series⑤Symbol of Capacitance Tolerance （M)⑥Max Operating Temp.KNSCHA SHG (M )105℃5.MULTIPLIER FOR RIPPLE CURRENT ①.②.No,KNS-200305001(1/5)Example of Marking①②③④⑤⑥F±0.5SleeveL+βmax.15min.4min.φD＋0.5φdRubber Bung6.CharacteristicsNo,KNS-200305001(2/5)6-2.Characteristics7Packing methodPackaging shape, size, quantity8Related Standards JIS C 51419Marking on packing box① Item name② Series name ③ Rated Voltage④ Nominal Static Capacitance ⑤ Case size ⑥ Lot No.⑦ QuantityNo,KNS-200305001(3/5)LHW10Leakagecurrent<Condition>Connecting the capacitor with a protective resistor (1kΩ±10Ω) in series for2 minutes, and then, measure leakage current.<CriteriaI : Leakage current (μA)I (μA)≤0.01CVor 3 (μA) whichever is greater,measurement circuit refer to right drawing.C: Capacitance (μF)11Soldeing11-1Soldering by soldering ironTemperature of iron top : 270～350℃ Operating time : within 3 sec.11-2Flow soldering.Preheat : PCB surface temperature 120℃±5℃Solder Temp : 260℃±5℃ Solder Dipping Temp. : 2～4sec.12Cleaning of PC boad after solderingUsing follwing solvents is possible but make sure followingconditionSolventIPA or Alcoholic agent like Pinealpha ST-100S, Cleanthrough 750H, 750L, 710M, 750K,or Technocare FRW-14～17① Cleaning should be made by ultrasonic within 5min, at the temperature less then 60℃.② Control of pollution is necessary (conductivity,pH, specific gravity, water volume)③ Please do not keep near cleaning agent. Please do not store in air-tight container.Please let it dry by hot air at the temperature less than maximum operating temp.13The situation of usingPlease do not use a condenser in the next use environment.① One circumference environment(weatherability) condition.(a) Direct water,salt water and environment oil works or become a dew condensation state.(b) Environment full of harmful gas (a hydrogen chloride, sulfurous acid.nitrous acid hydrochloric acid, ammonia).(c) Ozone, infrared rays and the environment where radioactive rays are done collation of② Vibration shock condition is extreme environment more than rule ranges of deliveryspecifications.14 A country of originA country of origin of an KNSCHA SHG series alminum electrolysis condenser of specifications:China15Effective life for storageStorage conditions:① Temperature range must be between 5-35℃② Relative humidity must be less than 75%③ Must be stored indoor④ Must be free from water, oil or salt water⑤ Must be free from toxic gasses (hydrogen sulfide, sulfurous acid, chlorine, ammonium, etc.)⑥ Must be free from ozone, ultraviolet rays or any other radiation⑦ Must be kept in capacitor original packageNo,KNS-200305001(4/5)Aluminum Electrolytic CapacitorSHG Series StructureControls of ozone layer destructive chemical materialsRegulated materials : CFCs, Halon, Carbon Tetrachloride, 1.1.1-TrichloroethaneThe products and parts do not include the above materialsThe products and parts are not used the above materials on process.The products and parts are not used PBBOs (Poly Bromo Bi-phenyl Oxides ).All materials are mentioned as existing chemical material in the "Law of examineand control of Production of Chemical Material"The products are not listed in Appendix 1 of Export Trade Rule and RegulationA condenser of this series supports RoHS regulation.No,KNS-200305001(5/5)。
MCS-2110 CS-2110系列芯片控制器产品说明书
U O n/Off orProportional Control UC onvenient Receptacles for Input andOutput Connections U C ompact Benchtop Design U 15 A Maximum Output UJ , K Thermocouple or RTD Input U O n/Off Power SwitchThe MCS-2110 and CS-2110 seriesbenchtop controllers are ideal for laboratory use and applications requiring portable temperature control. Pre-wired input andoutput receptacles at the back of the case enable quick and easyconnections to power, thermocouple or RTD input and power output.Thermocouple models use universal female connector to accept either a miniature or standard male connector. RTD models use a 3-prong female connector to accept an OTP-U-M type connector. A 120 Vac, 15 A maximum output receptacle can be used to control heaters or other devices up to 1800 watts. TheMCS-2110 and CS-2110controllers operate in either on/off or proportional control modes, selectable by a simple front panel adjustment.Control ModesThe CN2110 provides precise, solid state proportion control with automatic reset (PI) that will control most heating applications. On/off control may be selected forapplications where maximum output life (load switching) is needed.All models operate on 120 Vac, 15 A and include a 1.5 m (5') power cord.MCS-2110 SeriesBenchtop Temperature ControllersMCS-2110J-R shownsmaller than actual size.Ordering Examples: MCS-2110J-R , benchtop controller, single 15 A relay output, Type J thermocouple input, -73 to 760°C (-100 to 1400°F) range.OCW-3, OMEGACARE SM extends standard 1-year warranty to a total of 4 years.SpecificationsControl Modes: On/off, PI-proportional with integralControl AdjustmentsProportional Band: sensor range Automatic Reset:0.0 to 99.9 repeats/minuteCycle Time: 0.1 to 60.0 seconds On/Off Deadband: 1° to 100°F or °C Setpoint Upper Limit: Sensor range °F or °C Setpoint Lower Limit: Sensor range °F or °C Output Limit: 0 to 100%Alarm Adjustments:Type: Absolute high or lowSetpoint: Sensor range °F or °CAlarm Dead Band: 0° to 100°F or °C Control/Alarm Outputs Relay: Form “A”, 120 Vacresistive loads at 30 seconds, cycle time; 15 A, 500,000 operations; 15 A, 1 million operations; 5 A, 5 million operationsSolid State Relay: Up to 10 A at 40°C Sensor Input: Switch selectable, J, K thermocouple or RTDInput Update Rate: 4 samples/s Readout Stability:J and K Thermocouple: ±1°F/10°F change in ambient temperature RTD: ±0.5 per 10°F change in ambient temperatureOpen Sensor and Out-of-Range Conditions: Displays “SENS”; control output 0%Instrument Power: 120 Vac <10 Va Operating Environment: 0° to 65°C (32°to 150°F)Enclosure Material: High-temperature ABS plastic rated for 0° to 175°F Front Panel: NEMA 4X construction Influence of Line Voltage Variation: ±0.1% of sensor span per 10% change in nominal line voltage Noise Rejection:Common Mode Noise: <2°F with 230 Vac, 60 Hz applied from sensor input to groundSeries Mode Noise: <2°F with 100 mV, peak-to-peak series mode noiseRFI: Typically <0.5% of sensor span at distance of 1 m (3.1’) from a transmitter of 4 W at 464 MHz Sensor Leadwire Effect:RTD: ±0.1% of sensor span per 20Ω balanced leadwire resistanceThe UPJ-K-F universal connector accepts eitherRear ViewMC OutputAC powerOMEGACARE SM extended warranty program isavailable for models shown on this page. Ask your sales representative for full details when placing an order. OMEGACARE SM covers parts, labor and equivalent loaners.。
1695A 75欧姆SDI Coax, RG-6, 18 AWG实心BC, 外胶覆盖 + 95% T
Product:1695A75 Ohm SDI Coax, RG-6, 18 AWG Solid BC, Foil + 95% TC Braid, PVC Jkt,CMPProduct Description75 Ohm SDI Coax, RG-6, 18 AWG Solid Bare Copper Conductor, FEP Insulation, Foil + 95% Tinned Copper Braid Shield, PVC Jacket, CMP Technical SpecificationsProduct OverviewConstruction DetailsConductorInsulationOuter ShieldOuter JacketElectrical CharacteristicsReturn Loss (RL)Attenuation88.5 MHz 1.94 dB/100ft100 MHz 2.1 dB/100ft135 MHz 2.4 dB/100ft143 MHz 2.5 dB/100ft180 MHz 2.8 dB/100ft270 MHz 3.4 dB/100ft360 MHz 4.0 dB/100ft540 MHz 5.2 dB/100ft720 MHz 6.1 dB/100ft750 MHz 6.2 dB/100ft1000 MHz7.4 dB/100ft1500 MHz9.5 dB/100ft2000 MHz11.3 dB/100ft2250 MHz12.2 dB/100ft3000 MHz14.6 dB/100ft4500 MHz18.6 dB/100ft6000 MHz22.4 dB/100ftElectricalsNom. Conductor DCR Nom. Outer Shield DCR Nom. Capacitance Cond-to-Shield Nom. Characteristic Impedance Nom. Velocity of Prop.6.4 Ohm/1000ft (21 Ohm/km) 2.8 Ohm/1000ft (9.2 Ohm/km)16.2 pF/ft (53.1 pF/m)75 Ohm83%VoltageUL Voltage Rating300 V (CMP)Mechanical CharacteristicsTemperatureUL Temperature Operating75°C0°C to +75°CBend RadiusInstallation Min.2.3 inMax. Pull Tension:69 lbs (31 kg)Bulk Cable Weight:41 lbs/1000ftStandards and ComplianceEnvironmental Suitability:Indoor - Plenum, IndoorSustainability:CA Prop 65Flammability / Reaction to Fire:NFPA 262, FT6NEC / UL Compliance:CMPCEC / C(UL) Compliance:CMPEuropean Directive Compliance:EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) APAC Compliance:China RoHS II (GB/T 26572-2011)Non-Plenum Number:1694AHistoryUpdate and Revision:Revision Number: 0.361 Revision Date: 12-15-2021VariantsItem #Color Putup Type Length UPC1695A 010500Black Reel500 ft6128251212061695A 010Z500Black ReelTuff Box500 ft6128254346031695A 0101000Black Reel1,000 ft6128251211901695A 010Z1000Black ReelTuff Box1,000 ft6128254345041695A 0105000Black Reel5,000 ft6128251212131695A 01010000Black Reel10,000 ft6128254356621695A 006500Blue, Light Reel500 ft6128253529381695A 0061000Blue, Light Reel1,000 ft6128251211691695A 006Z1000Blue, Light ReelTuff Box1,000 ft6128254344741695A 00610000Blue, Light Reel10,000 ft6128254357161695A 0011000Brown Reel1,000 ft6128251211211695A 00110000Brown Reel10,000 ft6128254356791695A 0081000Gray Reel1,000 ft6128251211831695A 00810000Gray Reel10,000 ft6128254357471695A N3U1000Green, Mil Reel1,000 ft6128251211141695A N3U10000Green, Mil Reel10,000 ft6128254357611695A 877500Natural Reel500 ft6128251212371695A 8771000Natural Reel1,000 ft6128251212201695A 877Z1000Natural ReelTuff Box1,000 ft6128254345111695A 87710000Natural Reel10,000 ft6128254357541695A 0031000Orange Reel1,000 ft6128251211451695A 003Z1000Orange ReelTuff Box1,000 ft6128254344501695A 00310000Orange Reel10,000 ft6128254356931695A 0021000Red Reel1,000 ft6128251211381695A 002Z1000Red ReelTuff Box1,000 ft6128254344291695A 00210000Red Reel10,000 ft6128254356861695A 0071000Violet Reel1,000 ft6128251211761695A 007Z1000Violet ReelTuff Box1,000 ft6128254344811695A 0075000Violet Reel5,000 ft6128253531951695A 00710000Violet Reel10,000 ft6128254357301695A 0041000Yellow Reel1,000 ft6128251211521695A 004Z1000Yellow ReelTuff Box1,000 ft6128254344671695A 00410000Yellow Reel10,000 ft612825435709© 2022 Belden, IncAll Rights Reserved.Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability.Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.All sales of Belden products are subject to Belden's standard terms and conditions of sale.Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
专业16口KVM切换器EAKUN EK-1695C
一、KVM切换器的概念
KVM是Keyboard（键盘）、Video（显示器）、Mouse（鼠标）的缩写。
KVM切换器的正式的名称为多计算机切换器或KVM SWITCH。
KVM切换器简单的说，就是让系统管理员可以通过一组键盘、显示器和鼠标，控制多台服务器或电脑主机的计算机外围设备。
类型主要指KVM切换器所控制的终端类型，如果终端主要是控制电脑则可以叫做多电脑控制类型。
KVM 的领域，也已经扩展到串口设备，如集线器、路由器、储存设备及UPS等。
二、16口KVM切换器的定义
16口KVM切换器是拥有16个端口的KVM切换器，使用16口KVM切换器，系统管理员仅用1套键盘、鼠标和显示器就可控制16台电脑主机。
三、EK-1695C切换器的产品概述
· EK-1695C 是一款性能全面的LCD KVM切换器，浓缩了键盘、触摸鼠标板、19寸液晶、
16口CAT5KVM切换器于1U高度，为您能节省您宝贵的机柜空间。
·采用CAT5网线接口，使用网线连接服务器和切换器，有效延伸管控距离，最佳距离（切换器主机到服务器主机）可达50米，机房内分散部署的服务器也能从容管理。
配合必要的CAT5转换模块EA-1000CU(按需订购）,可切换控制多达16台服务器。
·通过树状级联匹配的KVM切换器(需另购置），最多可管控512台服务器，中型机房也能方便的进行集中管控。
·集成有IP插槽，配置EA-1000IP模块（需另购置）可实现IP远程管理。
·支持切换管理控制市场上主流的硬盘录像机，包括大华、雅安、海康等。
·具有热插拔功能，可直接增加或移除服务器而无需关闭KVM电源（配合EA-1000CU模块使用）。
·全方位支持各种硬件和软件，从Windows9x/2000/XP/Vista/7/8、NT、UNIX、LINUX、NOVELL、DOS、Solaris等多种系统，到SUN、IBM、HP、DELL、COMPAQ、联想、浪潮、曙光等各种服务器机型。
·产品通过CE、FCC认证，众多客户多年使用认可，性能可靠。
三、EK-1695C常见应用
一，单台直接管控
·EK-1695C切换器单台最多支持管控16台服务器主机或KVM设备。
二，树状级联管控
·EK-1695C支持2层树状级联方式，与Eakun品牌的各种型号KVM主机完美兼容。
与16台EK-3200C级联最多可管控512台服务器主机。
三，实现远程IP管控
·EK-1695C预留IP远程接口，可拓展EA-1000IP模块实现IP远程访问控制。
宜坤网络介绍
深圳市宜坤网络科技有限公司（宜坤网络）—EAKUN（宜坤）品牌的所有者，是设立于深圳市南山区南山科技园的新兴高科技公司，专业从事计算机、网络设备、智能家居、人体穿戴设备的研发、生产、及销售。
公司以互联网电子商务为载体，采用O2O电商模式，汇集顶尖研发、生产、销售人才，致力于打造中国最好的计算机及网络信息产品垂直电商平台。