CCNA 1 Final v5.0 答案

合集下载

CCNA第一学期各章习题及答案

诶了我累了目录第二章网络通信P2-8第三章应用层功能及协议P9-14第四章OSI传输层P15-20第五章OSI网络层P21-27第六章网络编址-IPv4 P28-34第七章数据链路层P35-40第八章OSI物理层P41-45第九章以太网P46-51第十章网络规划和布线P52-61第十一章配置和测试网络P62-70第一学期末考试P71-91文档末尾返回目录第二章网络通信001 TCP/IP 网络接入层有何作用？路径确定和数据包交换数据表示、编码和控制可靠性、流量控制和错误检测详细规定构成物理链路的组件及其接入方法将数据段划分为数据包002下列哪些陈述正确指出了中间设备在网络中的作用？（选择三项）确定数据传输路径发起数据通信重新定时和重新传输数据信号发送数据流管理数据流数据流最后的终止点003下列哪三项陈述是对局域网 (LAN) 最准确的描述？（选择三项）LAN 通常位于一个地域内。

此类网络由由一个组织管理。

LAN 中的不同网段之间一般通过租用连接的方式连接。

此类网络的安全和访问控制由服务提供商控制。

LAN 为同一个组织内的用户提供网络服务和应用程序访问。

此类网络的每个终端通常都连接到电信服务提供商 (TSP)。

004 什么是 PDU？传输期间的帧损坏在目的设备上重组的数据因通信丢失而重新传输的数据包特定层的封装005 OSI 模型哪两层的功能与 TCP/IP 模型的网络接入层相同？（选择两项）网络层传输层物理层数据链路层会话层006请参见图示。

所示网络属于哪一类型？WANMANLANWLAN007 以下哪种特征正确代表了网络中的终端设备？管理数据流发送数据流重新定时和重新传输数据信号确定数据传输路径008 第 4 层端口指定的主要作用是什么？标识本地介质中的设备标识源设备和目的设备之间的跳数向中间设备标识通过该网络的最佳路径标识正在通信的源终端设备和目的终端设备标识终端设备内正在通信的进程或服务009 请参见图示。

完整版CCNA测试题库及答案

完整版CCNA测试题库及答案描述载波侦听多路由访问/冲突检测（CSMA/CD）的工作原理。

CSMA/CD是一种帮助设备均衡共享带宽的协议，可避免两台设备同时在网络介质上传输数据。

虽然他不能消除冲突，但有助于极大的减少冲突，进而避免重传，从而提高所的设备的数据传输效率。

区分半双工和全双工通信。

并指出两种方法的需求。

与半双工以太网使用一对导线不同，全双工以太网使用两队导线，全双工使用不同的导线来消除冲突，从而允许同时发送和接收数据，而半双工可接收或发送数据，但不能同时接收和发送数据，且仍会出现冲突。

要使用全双工，电缆两端的设备都必须支持全双工，并配置成一全双模式运行。

描述MAC地址的组成部分以及各部分包含的信息。

MAC（硬件）地址时一种使用十六进制表示的地址，长48位（6B）。

其中前24位（3B）称为OUI（Organizationally Unique Idebtifier,组织唯一表示符），有IEEE分配给NIC制造商；余下的部分呢唯一地标识了NIC识别十进制数对应的二进制值和十六进制值。

用这三种格式之一表示的任何数字都可以转换为其他两种格式，能够执行这种转换对理解IP地址和子网划分至关重要。

识别以太网帧中与数据链路层相关的字段。

在以太网中，与数据链路层相关的字段包括前导码，帧其实位置分隔符，目标MAC地址，源MAC地址，长度或者类型以及帧校验序列。

识别以太网布线相关的IEEE标准。

这些标准描述了各种电缆类型的功能和物理特征，包括（但不限于）10Base2、10Base5和10BaseT。

区分以太网电缆类型及其用途。

以太网电缆分3种：直通电缆，用于将PC或路由器的以太网接口连接到集线器或交换机；交叉电缆。

用于将集线器连接到集线器，集线器连接到交换机，交换机连接到交换机以及PC连接到PC；反转电缆，用于PC和路由器或交换机之间建立控制台连接。

描述数据封装过程及其在分组创建中的作用。

数据封装指的是在OSI模型各层给数据添加信息的过程，也成为分组创建。

CCNA认证基础课程-课后作业.习题答案

CCNA认证基础-习题分析讲义第一部分第一章1. Convert the binary number 10111010 into its hexadecimal equivalent. Select thecorrect answer from the list below. （3）1) 852) 903) BA4) A15) B36) 1C2. Convert the Hexadecimal number A2 into its Base 10 equivalent. Select thecorrect answer from the list below. （4）1) 1562) 1583) 1604) 1625) 1646) 1663. Which binary number is a representation of the decimal number 248? （3）1) 111010002) 111101003) 111110004) 111110104. Which of the following will test the internal loopback of a node? （3）1) ping 10.10.10.12) ping 192.168.1.13) ping 127.0.0.14) ping 223.223.223.2235) ping 255.255.255.2555. What can be verified by successfully pinging the reserved loopback address ona host? （2）1) Connectivity exists between two hosts on the LAN.2) The TCP/IP stack of the local host is configured correctly.3) A connection exists between a host and the default gateway.4) The route a packet takes from the local host to a remote host is valid.6. Which of the following commands could be used on a Windows-basedcomputer to view the current IP configuration of the system? (Choose two.) （3，4）1) configip2) ifconfig3) ipconfig4) winipcfg5) Winipconfig7.Refer to the exhibit. What must be configured on Host B to allow it to communicate withthe Host C? (Choose three.) （2，4，6）1)the MAC address of RTA router interface connected to Switch 12) a unique host IP address3)the IP address of Switch 14)the default gateway address5)the MAC address of Host C6)the subnet mask for the LAN8. What are important characteristics to consider when purchasing a networkinterface card? (Choose two.) （2，3）1) security used on the network2) media used on the network3) system bus used on the computer4) software installed on the network5) diagnostic tools installed on the network第二章1. Select the necessary information that is required to compute the estimated timeit would take to transfer data from one location to another. (Choose two.) （1，5）1) file size2) data format3) network in use4) type of medium5) bandwidth of the link2. Using the data transfer calculation T=S/BW, how long would it take a 4MB file tobe sent over a 1.5Mbps connection? （2）1) 52.2 seconds2) 21.3 seconds3) 6.4 seconds4) 2 seconds5) 0.075 seconds6) 0.0375 seconds3. What are features of the TCP/IP Transport layer? (Choose two.) （3，5）1) path determination2) handles representation, encoding and dialog control3) uses TCP and UDP protocols4) packet switching5) reliability, flow control and error correction4. Which of the following is the Layer 4 PDU? （4）1) bit2) frame3) packet4) Segment5. What is important to remember about the data link layer of the OSI model whenconsidering Peer to Peer communication? (Choose three.) （3，4，5）1) It links data to the transport layer.2) It encapsulates frames into packets.3) It provides a service to the network layer.4) It encapsulates the network layer information into a frame.5) Its header contains a physical address which is required to complete the datalink functions.6) It encodes the data link frame into a pattern of 1s and 0s (bits) for transmissionon the medium.6. Which statement describes a star topology? （2）1) Each host in the network is connected to a backbone cable that is terminated atboth ends.2) Each host is connected to a hub or switch, either of which acts as a central pointfor all network connections.3) Each host is directly connected to two other hosts to form a long chain of hosts.4) Each host has a connection to all other hosts in the network.7. Which statements describe the logical token-passing topology? (Choose two.)（2）1) Network usage is on a first come, first serve basis.2) Computers are allowed to transmit data only when they possess a token.3) Data from a host is received by all other hosts. Electronic tokens are passedsequentially to each other.4) Token passing networks have problems with high collision rates.8. Which technologies are considered to be LAN technologies? (Choose two.) （2，5）1) DSL2) Token Ring3) Frame Relay4) ISDN5) Ethernet9.Refer to the exhibit. Host A wants to send a message to host B. Place the following stepsin the correct order so that the message can be sent. （4）A - add network layer addressesB - transmit bitsC - create application dataD - add data link layer addresses1) B, A, D, C2) D, A, C, B3) A, D, A, B4) C, A, D, B5) C, D, A, B6) C, B, A, D10.After an uns u ccessful ping to the local router, the technician decides to investigate therouter. The technician observes that the lights and fan on the router are not operational.In which layer of the OSI model is the problem most likely occurring? （4）1) transport2) network3) data link4) physical11. Refer t o the exhibit. What is the order of the TCP/IP Protocol Data Units as datais moved as indicated through the OSI model? （3）1) data, segments, frames, packets, bits2) data, packets, segments, frames, bits3) data, segments, packets, frames, bits4) data, packets, frames, segments, bits第三章1. Which combinations of charges will be repelled by electric force? (Choose two.)（4，6）1) neutral and neutral2) neutral and positive3) neutral and negative4) positive and positive5) positive and negative6) negative and negative2. Which of the following are considered the best media for use in data networkcommunications? (Choose three.) （2，3，6）1) glass2) fibers3) copper4) gold5) plastic6) silicon7) Silver3. Which of the following wireless standards increased transmission capabilitiesto 11 Mbps? （2）1) 802.11a2) 802.11b3) 802.11c4) 802.11d4. What is attenuation? （3）1) opposition to the flow of current2) measurement of electrical signals relative to time3) degradation of a signal as it travels along the medium4) amount or volume of traffic that is flowing on the medium5. Which cable specifications are indicated by 10BASE-T? （3）1) 10 Mbps transmission speed, baseband signal, 500 meter cable length, coaxialcable2) 10 Mbps transmission speed, broadband signal, 100 meter cable length, coaxialcable3) 10 Mbps transmission speed, baseband signal, 100 meter cable length,twisted-pair cable4) 10 Gbps transmission speed, broadband signal, 500 meter cable length,twisted-pair cable6. For which Ethernet installations would fiber optic rather than Cat5 UTP be abetter media choice? (Choose two.) （2，4）1) a 3 meter connection between two 10BASE-T hubs2) an environment with many potential sources of EMI and RFI3) a peer to peer connection between two NICs with RJ45 connectors4) an installation between two buildings that are located 500 meters apart5) a single building installation where installation costs are the major concern7. Refer to the exhibit. Which type of UTP cable should be used to connect Host Ato Switch1? （4）1) rollover2) console3) crossover4) straight-through8. Refer to the exhibit. Which type of Category 5 cable is used to make an Ethernetconnection between Host A and Host B? （3）1) coax cable2) rollover cable3) crossover cable4) straight-through cable第四章1. During cable testing, which of the following are used to calculate theinformation carrying capacity of a data cable? (Choose two.) （2，5）1) bit speed2) attenuation3) wire map4) saturation limit5) analog bandwidth2. What type of wiring problem is depicted in this sample of a cable tester? （3）1) a fault2) a short3) an open4) a split a good map3. In a new network installation, the network administrator has decided to use amedium that is not affected by electrical noise. Which cable type will best meet this standard? （5）1) coaxial2) screened twisted pair3) shielded twisted pair4) unshielded twisted pair5) fiber optic4. How does network cable length affect attenuation? （3）1) Category 5 cable that is run in metal conduit has the highest attenuation in theshortest distance.2) Shorter cable lengths have greater signal attenuation.3) Longer cable lengths have greater signal attenuation.4) The length of the cable has no effect on signal attenuation.第五章1. The highest capacity Ethernet technologies should be implemented in whichareas of a network? (Choose three.) （3，4，5）1) between workstation and backbone switch2) between individual workstations3) between backbone switches4) between enterprise server and switch5) on aggregate access links2. What device must be used between an AUI port of a networking device and themedia to which it is being connected? （3）1) a transducer2) a transmitter3) a transceiver4) a transponder5) a port replicator3. An ISDN Basic Rate Interface (BRI) is composed of how many signalingchannels? （1）1) 12) 23) 34) 44. Which layer of the OSI model covers physical media? （1）1) Layer 12) Layer 23) Layer 34) Layer 45) Layer 56) Layer 65. What type of network cable is used between a terminal and a console port? （3）1) cross-over2) straight-through3) rollover4) patch cable6. What is the recommended maximum number of workstations configured on apeer-to-peer network? （3）1) 252) 153) 104) 55) 27. Which of the following increases the potential for a collision to occur? （4）1) the use of an active hub instead of an intelligent hub2) the use of an intelligent hub instead of an active hub3) a reduction in the number of devices attached to the hub4) an increase in the number of devices attached to the hub8. What is the maximum length of a media segment used for 100BASE-TX? （1）1) 100 meters2) 185 meters3) 400 meters4) 500 meters9. Which cable diagram displays the end to end pinout for a crossover cable usedwith Cisco devices? （3）1) Cable A2) Cable B3) Cable C4) Cable D第六章1. What does the "10" in 10Base2 indicate about this version of Ethernet? （2）1) The version uses Base10 numbering within the frames.2) The version operates at a transmission rate of 10 Mbps.3) Frames can travel 10 meters unrepeated.4) The maximum frame length is 10 octets.2. How is a MAC address represented? （4）1) four groups of eight binary digits separated by a decimal point2) four Base10 digits separated by a decimal point3) six hexadecimal digits4) twelve hexadecimal digits5) twenty-four Base10 digits3. Which of the following statements are correct about CSMA/CD? (Choose three.)（1，3，6）1) It is a media access method used in LANs.2) It is a media access method used in FDDI WANs.3) When a device needs to transmit, it checks to see if the media is available.4) A device sends data without checking media availability because all deviceshave equal access.5) Multiple devices can successfully transmit simultaneously.6) Only one device can successfully transmit at a time.4. Which devices shown in the graphic must have a MAC address? （5）1) only PC2) only router3) PC and router4) PC, hub, and router5) PC, printer, and router第七章1. Which of the following items are common to all 100BASE technologies?(Choose three.) （1，4，5）1) frame format2) media3) connectors4) timing5) multi-part encoding2. Which of the following does 1000BASE-T use to accomplish gigabit speeds onCat 5e cable? （4）1) the use of four conductors in full-duplex mode2) the use of two multiplexed pairs of wires, simultaneously3) the use of three pairs of wires for data and the fourth for stabilization andforward error correction4) the use of all four pairs of wires in full-duplex mode, simultaneously3. For which of the following is Ethernet considered the standard? (Choose three.)（1，4，5）1) inter-building connection2) mid-length voice3) video conferencing4) vertical wiring5) horizontal wiring6) diagonal wiring4. To make sure timing limitations are not violated when implementing a 10 MbpsEthernet network involving hubs or repeaters, a technician should adhere to which rule? （4）1) the 4-5-3 rule2) the 6-4-2 rule3) the 3-4-5 rule4) the 5-4-3 rule5. What is the maximum distance that 10BASE-T will transmit data before signalattenuation affects the data delivery? （1）1) 100 meters2) 185 meters3) 300 meters4) 500 meters6. When using Category 5 UTP cable, which RJ-45 pin pairs are used to exchangedata between hosts on an Ethernet network? （2）1) 1 and 2; 4 and 52) 1 and 2; 3 and 63) 3 and 6; 7 and 84) 4 and 5; 7 and 8第八章1. John has been hired as the network administrator of a local company and hasdecided to add more hubs to the company's existing network. Which of the following has been caused by John's inexperience? （1）1) collision domain extended2) an increased number of collision domains3) increased network performance4) increased bandwidth5) extended bandwidth2. "CompA" is trying to locate a new computer named "CompB" on the network.Which of the following does "CompA" broadcast to find the MAC address of "CompB"? （2）1) MAC request2) ARP request3) ping4) Telnet5) proxy ARP3. Which of the following is a term associated with replacing hubs with switchesto increase the number of collision domains? （3）1) encapsulation2) latency3) segmentation4) layered model5) broadcast domain6) Extended4. The accumulation of traffic from which of the following can cause a networkcondition called broadcast radiation? (Choose three.) （3，5，6）1) anonymous FTP servers2) telnet sessions3) video over IP applications4) NAS services5) ARP requests6) RIP updates5. Which of the following describes the use of Spanning Tree Protocol (STP)? （4）1) resolve routing loops2) eliminate Split Horizon errors3) limit collisions4) resolve switching loops6. Which term describes the delay in time that occurs when a frame leaves itssource device and reaches its destination? （4）1) collision2) backoff3) attenuation4) latency5) broadcast7. Based on the graphic above, which of the following occurs as each host systemcomes on line in the topology? （2）1) The switch sends its MAC address to each host.2) The switch adds MAC address to the bridge table as each host sends a frame.3) Each host exchanges MAC addresses with each other.4) The switch listens for data traffic to block since the switch lacks an IP address. 8. Which devices segment collision domains? (Choose two.) （2，3）1) transceiver2) router3) switch4) hub5) media9. Which protocol is used to eliminate switching loops? （3）1) Transmission Control Protocol2) Routing Information Protocol3) Spanning Tree Protocol4) Interior Gateway Routing Protocol5) Internetworking Protocol10. Refer to the exhibit. A network associate needs to establish an Ethernetconnection between Host A and Host B. However, the distance between the two hosts is further than the cabling standards allow. Which two devices that operate at the physical layer of the OSI can be used to allow Host A and Host B to communicate? （2，5）1) switch2) hub3) bridge4) router5) repeater第九章1. Which term describes an ARP response by a router on behalf of a requestinghost? （3）1) ARP2) RARP3) Proxy ARP4) Proxy RARP2. Which protocol functions at the internet layer of the TCP/IP protocol suite? （4）1) File Transfer Protocol (FTP)2) Trivial File Transfer Protocol (TFTP)3) Transmission Control Protocol (TCP)4) Internet Protocol (IP)5) User Datagram Protocol (UDP)6) Simple Mail Transport Protocol (SMTP)3. Which of these workstation installation and setup tasks are concerned withnetwork access layer functions? (Choose two.) （2，4）1) configuring the e-mail client2) installing NIC drivers3) configuring IP network settings4) connecting the network cable5) using FTP to download application software updates4. Which part of an IP address identifies a specific device on a network? （4）1) first two octets2) third and fourth octets3) network portion4) host portion5) only the fourth octet5. Which of the following are features of the Internet Protocol (IP)? (Choose two.)（1，3）1) It is the most widely implemented global addressing scheme.2) It allows two hosts to share a single address on a local area network.3) It is a hierarchical addressing scheme allowing addresses to be grouped.4) It is only locally significant, used primarily on local area networks.6. Which of the following are useable Class A IP addresses with a default subnetmask? (Choose three.) （2，3，5）1) 127.0.39.12) 111.9.28.303) 123.1.2.1324) 128.50.38.25) 105.1.34.16) 0.23.92.37. Which application layer protocols use UDP at the transport layer? (Choose two.)（2，4）1) FTP2) SNMP3) Telnet4) DHCP5) SMTP第十章1. Which OSI layer encapsulates data into packets? （3）1) session2) transport3) network4) data link2. Which OSI layer defines the functions of a router? （3）1) physical2) data link3) network4) transport5) session3. Which of the following are Cisco proprietary routing protocols? (Choose two.)（2，6）1) RIPv22) IGRP3) OSPF4) BGP5) RIPv16) EIGRP4. A company with a Class B license needs to have a minimum of 1,000 subnetswith each subnet capable of accommodating 50 hosts. Which mask below is the appropriate one? （4）1) 255.255.0.02) 255.255.240.03) 255.255.255.04) 255.255.255.1925) 255.255.255.2245. A small company has a class C network license and needs to create five usablesubnets, each subnet capable of accommodating at least 20 hosts. Which of the following is the appropriate subnet mask? （3）1) 255.255.255.02) 255.255.255.1923) 255.255.255.2244) 255.255.255.2406. When a network administrator applies the subnet mask 255.255.255.248 to aClass A address, for any given subnet, how many IP addresses are available to be assigned to devices? （6）1) 10222) 5103) 2544) 1265) 306) 67. Host A is assigned the IP address 10.18.97.55 /21. How many more networkdevices can be assigned to this subnetwork if Host A is the only one that has an IP address assigned so far? （4）1) 2542) 5093) 10214) 20455) 40946) 81908.Refe r to the exhibit. The network administrator wants to create a subnet for thepoint-to-point connection between the two routers. Which subnetwork mask would provide enough addresses for the point-to-point link with the least number of wasted addresses?1) 255.255.255.1922) 255.255.255.2243) 255.255.255.2404) 255.255.255.2485) 255.255.255.2529. What is the correct number of usable subnetworks and hosts for the IP networkaddress 192.168.35.0 subnetted with a /28 mask?1) 6 networks / 64 hosts2) 14 networks / 32 hosts3) 14 networks / 14 hosts4) 30 networks / 64 hosts10. Which subnet masks would be valid for a subnetted Class B address? (Choosetwo.) （5，6）1) 255.0.0.02) 255.254.0.03) 255.224.0.04) 255.255.0.05) 255.255.252.06) 255.255.255.19211. Refer to the exhibit. How will the Fohi router dynamically learn routes to the192.168.16.16/28, 192.168.16.32/28, and 192.168.16.48/28 subnetworks? （3）1) with a static route2) with a routed protocol3) with a routing protocol4) with a directly connected route12. How many broadcast domains are shown in the diagram? （1）1) three2) four3) five4) six5) seven6) eight13. How many collision domains are shown in the diagram? （5）1) three2) four3) five4) six5) seven6) eight14. A router interface has been assigned an IP address of 172.16.192.166 with amask of 255.255.255.248. To which subnet does the IP address belong?1) 172.16.0.02) 172.16.192.03) 172.16.192.1284) 172.16.192.1605) 172.16.192.1686) 172.16.192.17615. Refer to the exhibit. Host A is sending data to Host B. Once R2 determines thatdata from Host A must be forwarded to R1 to reach Host B, which layer of the OSI model will R2 use to address and build the frames destined for R1?1) physical2) data link3) network4) transport5) session6) presentation16. Which type of address is 192.168.170.112/28?1) host address2) subnetwork address3) broadcast address4) multicast address17. Which type of address is 223.168.17.167/29?1) host address2) multicast address3) broadcast address4) subnetwork address18. Which combination of network id and subnet mask correctly identifies all IPaddresses from 172.16.128.0 through 172.16.159.255?1) 172.16.128.0 255.255.255.2242) 172.16.128.0 255.255.0.03) 172.16.128.0 255.255.192.04) 172.16.128.0 255.255.224.05) 172.16.128.0 255.255.255.19219. Refer to the exhibit. The internetwork in the exhibit has been assigned the IPaddress 172.20.0.0. What would be the appropriate subnet mask to maximize the number of networks available for future growth?1) 255.255.224.02) 255.255.240.03) 255.255.248.04) 255.255.252.05) 255.255.254.06) 255.255.255.0第十一章1. If a network administrator needed to download files from a remote server, whichprotocols could the administrator use to remotely access those files? (Choose two.) （3，5）1) NFS2) ASCII3) TFTP4) IMAP5) FTP6) UDP2. What is established during a connection-oriented file transfer betweencomputers? (Choose two.) （2，5）1) a temporary connection to establish authentication of hosts2) a connection used for ASCII or binary mode data transfer3) a connection used to provide the tunnel through which file headers aretransported4) a command connection which allows the transfer of multiple commands directlyto the remote server system5) a control connection between the client and server3. Which of the following protocols are used for e-mail transfer between clientsand servers? (Choose three.) （3，4，5）1) TFTP2) SNMP3) POP34) SMTP5) IMAP46) postoffice4. Which type of institution does the domain suffix .org represent? （4）1) government2) education3) network4) non-profit5. Which of the following services is used to translate a web address into an IPaddress? （1）1) DNS2) WINS3) DHCP4) Telnet6. Which part of the URL http://www.awsb.ca/teacher gives the name of thedomain? （4）1) www2) http://3) /teacher4) awsb.ca7. Which protocols are TCP/IP application layer protocols? (Choose two.) （2，4）1) UDP2) FTP3) IP4) SMTP5) TCP8. What are three characteristics of the TCP protocol? (Choose three.) （3，4，6）1) has less overhead than UDP2) is used for IP error messages3) forces the retransmission undelivered packets4) creates a virtual session between end-user applications5) carries the IP address of destination host in the TCP header6) is responsible for breaking messages into segments and reassembling9. Two peer hosts are exchanging data using TFTP. During the current session, adatagram fails to arrive at the destination. Which statement is true regarding the retransmission of the datagram? （2）1) Datagram retransmission requires user authentication.2) Datagram retransmission is controlled by the application.3) Datagram retransmission relies on the acknowledgements at transport layer.4) Datagram retransmission occurs when the retransmission timer expires in thesource host.案例学习1. 子网计算练习：Answer2. 子网号及广播地址计算练习Answer3. 子网规划练习：已知：给定一个C类地址201.16.5.0/24。

思科CCNA5.0Final答案汇总

1PDU 封装的正确顺序是什么？答案说明最高分值correctness of response 2 points for Option 10 points for any other option22管理员在发出 ping 命令之后在交换机上使用 Ctrl-Shift-6 键组合。

使用这些按键有什么用途？重新启动ping 进程中断 ping 进程退出到不同的配置模式允许用户完成命令要中断一个 IOS 进程（例如 ping 或 traceroute ），用户可以输入 Ctrl-Shift-6 键组合。

Tab 用于完成命令参数或变量的其余部分。

要退出配置模式并进入特权模式，可以使用 Ctrl-Z 按键。

CTRL-R 将会重新显示当前键入的行，这样便于用户按 Enter 并重新发出 ping 命令。

答案说明最高分值correctness of response 2 points for Option 2 0 points for any other option23 建立融合网络有何用途？为所有终端设备提供高速连接确保平等对待所有类型的数据包实现数据网络基础架构设备的容错能力和高可用性降低部署和维护通信基础设施的成本随着技术的发展，各个公司现在可以将不同的网络整合到一个平台之上，称为融合网络。

在融合网络中，语音、视频和数据通过同一网络传输，从而使人们不必再创建和维护各个单独的网络。

这也降低了提供和维护通信网络基础设施相关的成本。

答案说明最高分值correctness of response 2 points for Option 40 points for any other option24请参见图示。

哪个区域最有可能是图中所示的公司网络的外联网？区域A区域B区域C区域D外联网是外部实体访问其他公司的数据的平台。

其形式可能是产品供应商所使用的库存服务器，也可能是外部实体用来访问当天客户数量的当前信息的Web 服务器。

CCNA 5.0路由和交换：网络简介第7章传输层(练习和答案)

correctness of response 1 point for each correct option.
2
0 points if more options are selected than required.
如果 TFTP 传输的第一个数据包丢失，会发生什么情况？客户端将无限期等待应答。
答案
说明
最高分值
correctness
of
response
2 0
points points
for for
Option 2 any other
option 2
填空题。 18 在 TCP 会话过程中，客户端使用
字段来请求与服务器通信。
正确答案： SYN
TCP 三次握手过程中的三个步骤分别是 SYN、SYN-ACK、ACK。
答案
说明
最高分值
correctness
of
response
2 0
points points
for for
Option 2 any other
option 2
主机设备需要通过网络发送大型视频文件，同时为其他用户提供数据通信。下列哪种功能可以让不同通信流同时发生，而不会让一个数据流使用所有可用带宽？
2
for for
Option 3 any other
option 2
13
鸿鹄论坛：/
一台 PC 从服务器下载一个大文件。TCP 窗口大小为 1000 字节。服务器使用 100 字节的数据段发送文件。服务器发送多少个数据段后会要求 PC 确认？
1 个数据段
10 个数据段
答案
说明
最高分值
正确答案

思科第一学期期末考试最新答案CCNA1

要将数据包发送到远程网络，应使用哪种设备？访问交换机DHCP 服务器集线器路由器OSI 哪一层使用面向连接的协议来确保数据的可靠传输？应用层表示层会话层传输层请参见图示。

根据显示的IP 配置回答，主机 A 和主机 B 无法在本地网络外通信的原因是什么？对主机 A 分配了网络地址。

对主机 B 分配了组播地址。

主机 A 和主机 B 属于不同的网络。

对网关地址分配了广播地址。

请参见图示。

包含路由器 B 的网络遇到问题。

助理网络工程师已确定此网络的问题出在路由行什么操作可以纠正该网络问题？在接口Serial 0/0/0 上发出clock rate命令在接口Serial 0/0/1 上发出description命令在接口FastEthernet 0/0 上发出ip address命令在接口FastEthernet 0/1 上发出no shutdown命令请参见图示。

对于从主机 A 向Web 服务器发出的网页请求，正确的目的套接字数字是什么00-08-a3-b6-ce-46198.133.219.25:80C 172.18.0.0/24 is directly connected, FastEthernet0/0在Cisco IOS 设备中，启动配置文件存储于何处？闪存NVRAMRAMROM在配置路由器时，网络技术人员想要命名路由器。

输入hostname命令后，技术人员会看到下列示？Router>Router#Router(config)#Router(config-line)#下列哪三个IPv4 地址代表子网的广播？（选择三项）172.16.4.63 /26172.16.4.129 /26172.16.4.191 /26172.16.4.51 /27172.16.4.95 /27172.16.4.221 /27网络管理员想要限制访问路由器的特权执行模式。

管理员应该使用哪一种口令？使能aux控制台VTY请参见图示。

思科CCNA考试答案(全)

CCNA思科考试答案（全）第 1 章考试1一家拥有10 名员工的小型公司使用单个LAN 在计算机之间共享信息。

哪种类型连接适合此公司？由当地电话服务提供商提供的拨号连接能够使公司方便且安全地连接员工的虚拟专用网络通过当地服务提供商建立的私有专用线路通过当地服务提供商提供的宽带服务（如DSL）答案：4解析：对于这种小型办公室，比较适合通过被称为数字用户线路(DSL) 的常见宽带服务实现Internet 连接，这种服务由当地的电话服务提供商提供。

由于员工人数很少，带宽的问题并不突出。

如果公司较大，在远程站点有分支机构，则专用线路会更加适合。

如果公司员工需要通过Internet 与公司联系，则采用虚拟专用网。

2哪种网络情况需要使用WAN？员工工作站需要获取动态分配的IP 地址。

员工在出差时需要通过VPN 连接到公司电子邮件服务器。

分支机构的员工需要与同一园区网络上的另一座建筑物内的公司总部共享文件。

员工需要访问托管在其建筑物内DMZ 中的公司Web 服务器上的网页。

答案：2解析：当出差的员工需要通过WAN 连接到公司电子邮件服务器时，VPN 将通过WAN 连接在员工笔记本电脑与公司网络之间创建一个安全隧道。

通过DHCP 获取动态IP 地址是LAN 通信的功能。

在企业园区的不同建筑物之间共享文件可通过LAN 基础设施来实现。

DMZ 是企业LAN 基础设施内一个受保护的网络。

3以下哪项描述了WAN 的特征？WAN 和LAN 在同一地理范围内运行，但有串行链路。

WAN 网络归运营商所有。

所有串行链路均被视为WAN 连接。

WAN 可提供到园区主干网的终端用户网络连接。

答案：2解析：WAN 可用于将企业LAN 互连到远程分支机构站点LAN 和远程工作人员站点。

WAN 归运营商所有。

虽然WAN 连接一般通过串行接口实现，但并不是所有串行链路均连接至WAN。

LAN（而非WAN）可在组织中提供终端用户网络连接。

4电路交换WAN 技术的两个常见类型是什么？（请选择两项。

CCNA第一学期Finalexam考试英文版答案

CCNA第一学期Finalexam考试英文版答案(R&S.)C 1A medium-sized business is researching available options for connecting to the Internet.Thecompany is looking for a high speed option with dedicated, symmetric access.Whichconnection type should the company choose?DSLdialupsatelliteleased linecable modem2What is the purpose of having a converged network?to provide high speed connectivity to all end devicesto make sure that all types of data packets will be treated equallyto achieve fault tolerance and high availability of data network infrastructure devicesto reduce the cost of deploying and maintaining thecommunication infrastructure3What characteristic of a network enables it to quickly grow to support new users andapplications without impacting the performance of the service being delivered to existing users?reliabilityscalabilityquality of serviceaccessibility4Which connection provides a secure CLI session with encryption to a Cisco switch?a console connectionan AUX connectiona Telnet connectionan SSH connection5A network technician is attempting to configure an interface by entering the followingcommand:SanJose(config)#ip address192.168.2.1255.255.255.0.The command isrejected by the device.What is the reason for this? The command is being entered from the wrong mode of operation.The command syntax is wrong.The subnet mask information is incorrect.The interface is shutdown and must be enabled before the switch will accept the IP address.6After several configuration changes are made to a router, the copy running-configurationstartup-configuration command is issued.Where will the changes be stored?flashROMNVRAMRAMthe configuration registera TFTP server7Refer to the exhibit.From global configuration mode,an administrator is attempting to create a message-of-the-day banner by using thecommand banner motd V Authorized access only!Violators will be prosecuted!V When users log in using Telnet,the banner does not appear correctly.What is the problem? The banner message is too long.The delimiting character appears in the banner message.The symbol“!”signals the end of a banner message.Message-of-the-day banners will only appear when a user logs in through the console port.8What are three characteristics of an SVI?(Choose three.) It is designed as a security protocol to protect switch ports.It is not associated with any physical interface on a switch.It is a special interface that allows connectivity by different types of media.It is required to allow connectivity by any device at any location.It provides a means to remotely manage a switch.It is associated with VLAN1by default.9A technician configures a switch with these commands: SwitchA(config)#interface vlan1SwitchA(config-if)#ip address192.168.1.1255.255.255.0 SwitchA(config-if)#no shutdownWhat is the technician configuring?Telnet accessSVIpassword encryptionphysical switchport access10In computer communication,what is the purpose of message encoding?to convert information to the appropriate form for transmissionto interpret informationto break large messages into smaller framesto negotiate correct timing for successful communication11What protocol is responsible for controlling the size of segments and the rate at whichsegments are exchanged between a web client and a web server?TCPIPHTTPEthernet12What are two benefits of using a layered network model? (Choose two.)It assists in protocol design.It speeds up packet delivery.It prevents designers from creating their own model.It prevents technology in one layer from affecting other layers.It ensures a device at one layer can function at the next higher layer.13What is the process of dividing a data stream into smaller pieces before transmission?segmentationencapsulationencodingflow control14When IPv4addressing is manually configured on a web server,which property of the IPv4configuration identifies the network and host portion for an IPv4address?DNS server addresssubnet maskdefault gatewayDHCP server address15A network administrator is troubleshootingconnectivity issues on a ing a tester,the administrator notices that the signals generated by the server NIC are distorted and not usable.In which layer of the OSI model is the error categorized?presentation layernetwork layerphysical layerdata link layer16A network engineer is measuring the transfer of bits across the company backbone for amission critical database application.The engineer notices that the network throughputappears lower than the bandwidth expected.Which three factors could influence thedifferences in throughput?(Choose three.)the amount of traffic that is currently crossing the networkthe sophistication of the encapsulation method applied to the datathe type of traffic that is crossing the networkthe latency that is created by the number of network devices that the data is crossingthe bandwidth of the WAN connection to the Internetthe reliability of the gigabit Ethernet infrastructure of the backbone17Which type of UTP cable is used to connect a PC to a switch port?consolerollovercrossoverstraight-through18What is a characteristic of the LLC sublayer?It provides the logical addressing required that identifies the device.It provides delimitation of data according to the physical signaling requirements of the medium.It places information in the frame allowing multiple Layer 3protocols to use the same network interface and media.It defines software processes that provide services to the physical layer.19What are the three primary functions provided by Layer 2data encapsulation?(Choosethree.)error correction through a collision detection methodsession control using port numbersdata link layer addressingplacement and removal of frames from the mediadetection of errors through CRC calculationsdelimiting groups of bits into framesconversion of bits into data signals20What will a host on an Ethernet network do if it receives a frame with a destination MACaddress that does not match its own MAC address?It will discard the frame.It will forward the frame to the next host.It will remove the frame from the media.It will strip off the data-link frame to check the destination IP address.21What are two actions performed by a Cisco switch? (Choose two.)building a routing table that is based on the first IP address in the frame headerusing the source MAC addresses of frames to build and maintain a MAC address tableforwarding frames with unknown destination IP addresses to the default gatewayutilizing the MAC address table to forward frames via the destination MAC addressexamining the destination MAC address to add new entries to the MAC address table22What are two examples of the cut-through switching method?(Choose two.)store-and-forward switchingfast-forward switchingCRC switchingfragment-free switchingQOS switching23Refer to the exhibit.If host A sends an IP packet to host B,what will the destination address be in the frame when it leaves host A?DD:DD:DD:DD:DD:DD172.168.10.99CC:CC:CC:CC:CC:CC172.168.10.65BB:BB:BB:BB:BB:BBAA:AA:AA:AA:AA:AA24What are two services provided by the OSI network layer?(Choose two.)performing error detectionrouting packets toward the destinationencapsulating PDUs from the transport layerplacement of frames on the mediacollision detection25What information is added during encapsulation at OSI Layer3?source and destination MACsource and destination application protocolsource and destination port numbersource and destination IP address26What are two functions of NVRAM?(Choose two.)to store the routing tableto retain contents when power is removedto store the startup configuration fileto contain the running configuration fileto store the ARP table27Refer to the exhibit.The network administrator for a small advertising company has chosen to use the192.168.5.96/27 network for internal LAN addressing.As shown in the exhibit,a static IP address is assigned to the company web server.However,the web server cannot access the Internet.The administrator verifies that local workstations with IP addresses that are assigned by a DHCP server can access the Internet,and the web server is able to ping local workstations.Which component is incorrectly configured?subnet maskDNS addresshost IP addressdefault gateway address28Why does a Layer3device perform the ANDing process on a destination IP address andsubnet mask?to identify the broadcast address of the destination networkto identify the host address of the destination hostto identify faulty framesto identify the network address of the destination network29What are the three ranges of IP addresses that are reserved for internal private use?(Choosethree.)10.0.0.0/864.100.0.0/14127.16.0.0/12172.16.0.0/12192.31.7.0/24192.168.0.0/1630Which three addresses are valid public addresses? (Choose three.)198.133.219.17192.168.1.24510.15.250.5128.107.12.117192.15.301.24064.104.78.22731What type of IPv6address is FE80::1?loopbacklink-localmulticastglobal unicast32Refer to the exhibit.On the basis of the output,which two statements about network connectivity are correct? (Choose two.)There is connectivity between this device and the device at192.168.100.1.The connectivity between these two hosts allows for videoconferencing calls.There are4hops between this device and the device at 192.168.100.1.The average transmission time between the two hosts is2 milliseconds.This host does not have a default gateway configured.33Which subnet would include the address192.168.1.96as a usable host address?192.168.1.64/26192.168.1.32/27192.168.1.32/28192.168.1.64/2934How many hosts are addressable on a network that has a mask of255.255.255.248?268141625435Which statement is true about variable-length subnet masking?Each subnet is the same size.The size of each subnet may be different,depending on requirements.Subnets may only be subnetted one additional time.Bits are returned,rather than borrowed,to create additional subnets.36Refer to the exhibit.Consider the IP address of 192.168.10.0/24that has been assigned to a high school building.The largest network in this building has100 devices.If192.168.10.0is the network number for the largest network,what would be the network number for thenext largest network,which has40devices?192.168.10.0192.168.10.128192.168.10.192192.168.10.224192.168.10.24037In what two situations would UDP be the preferred transport protocol over TCP?(Choosetwo.)when applications need to guarantee that a packet arrives intact,in sequence,and unduplicatedwhen a faster delivery mechanism is neededwhen delivery overhead is not an issuewhen applications do not need to guarantee delivery of the datawhen destination port numbers are dynamic38What important information is added to the TCP/IPtransport layer header to ensurecommunication and connectivity with a remote network device?timing and synchronizationdestination and source port numbersdestination and source physical addressesdestination and source logical network addresses39What is the TCP mechanism used in congestion avoidance? three-way handshakesocket pairtwo-way handshakesliding window40Which three statements characterize UDP?(Choose three.)UDP provides basic connectionless transport layer functions.UDP provides connection-oriented,fast transport of data at Layer 3.UDP relies on application layer protocols for error detection.UDP is a low overhead protocol that does not provide sequencing or flow control mechanisms.UDP relies on IP for error detection and recovery.UDP provides sophisticated flow control mechanisms.41Which two tasks are functions of the presentation layer? (Choose two.)compressionaddressingencryptionsession controlauthentication42Which two protocols operate at the highest layer of the TCP/IP protocol stack?(Choose two.)DNSEthernetIPPOPTCPUDP43Which two roles can a computer assume in a peer-to-peer network where a file is beingshared between two computers?(Choose two.)clientmasterserverslavetransient44What is the function of the HTTP GET message?to request an HTML page from a web serverto send error information from a web server to a web clientto upload content to a web server from a web clientto retrieve client email from an email server using TCP port11045A wireless host needs to request an IP address.What protocol would be used to process therequest?FTPHTTPDHCPICMPSNMP46When planning for network growth,where in the network should packet captures take place toassess network traffic?on as many different network segments as possibleonly at the edge of the networkbetween hosts and the default gatewayonly on the busiest network segment47When applied to a router,which command would help mitigate brute-force password attacksagainst the router?exec-timeout30service password-encryptionbanner motd$Max failed logins=5$login block-for60attempts5within6048Refer to the exhibit.An administrator is testing connectivity to a remote device with the IP address10.1.1.1.What does the output of this command indicate?Connectivity to the remote device was successful.A router along the path did not have a route to the destination.A ping packet is being blocked by a security device along the path.The connection timed out while waiting for a reply fromthe remote device.。

ccna1章节与期末答案

第一章：正确答案：2.4.5•解析：由于不需要使用网络设备和专用服务器，对等网络易于创建，复杂性更低，且成本更少。

而且对等网络也没有集中管理。

这种网络安全性更低，不可扩展，而且那些同时充当客户端和服务器的设备可能性能更差正确答案：1解析：正确答案： 3.5解析：选择网络介质的条件包括：所选介质可以成功传送信号的距离、要安装所选介质的环境、必须传输的数据量和速度以及介质和安装的成本。

正确答案：3和4解析：终端设备上的应用程序可以生成数据，更改数据内容并且负责启动封装过程。

正确答案：1和4解析：终端设备会发出通过网络传输的数据。

中间设备会在链路发生故障时通过备用路径传输数据，并且会过滤数据传输以增强安全性。

网络介质提供网络消息的传输通道。

正确答案：4解析：外联网是公司外部的人或企业合作伙伴访问数据的网络区域。

内部网只描述通常仅供内部人员访问的网络区域。

当设备连接到有线网络时，有线LAN 会受BYOD（自带设备）影响。

使用大学无线LAN 的设备多为平板电脑和智能手机。

大学生主要使用无线WAN 来访问他们的手机运营商网络。

.正确答案：2解析：由于通过Internet 可以联系在线供应商，所以家庭用户通过Internet 进行网上购物。

内联网基本上是仅供内部使用的局域网。

外联网是外部合作伙伴访问组织内部特定资源的网络。

家庭用户并不一定使用LAN 来访问Internet。

例如，PC 可以通过调制解调器直接连接到ISP。

正确答案：1解析：内部网这个术语用于表示一个组织的私有局域网和广域网连接。

内部网的设计旨在仅允许该组织的成员、员工或其他获得授权的人员进行访问。

正确答案：2和4解析：电缆和DSL 均能实现高带宽、始终联网，并提供到主机计算机或LAN 的以太网连接。

10正确答案：2和3解析：移动电话连接需要使用移动电话网络。

卫星连接通常用于家庭或企业外部不便使用物理布线的位置。

11正确答案：2解析：当对网络资源的请求超出了可用容量时，网络就会变得拥堵。

CCNA第一学期各章习题和参考答案.doc

CCNA第一学期各章习题和参考答案第二章网络通信1、TCP/IP网络接入层有何作用？A路径确定和数据包交换B数据表示、编码和控制C可靠性、流量控制和错误检测E将数据段划分为数据包2、下列哪些陈述正确指出了中间设备在网络中的作用？（选择三项）B发起数据通信D发送数据流F数据流最后的终止点3、下列哪三项陈述是对局域网(LAN) 最准确的描述？（选择三项）C LAN 中的不同网段之间一般通过租用连接的方式连接。

D此类网络的安全和访问控制由服务提供商控制。

F此类网络的每个终端通常都连接到电信服务提供商(TSP)。

004 什么是PDU？A传输期间的帧损坏B在目的设备上重组的数据C因通信丢失而重新传输的数据包005 OSI 模型哪两层的功能与TCP/IP 模型的网络接入层相同？（选择两项）018哪个应用层协议通常用于支持客户端与服务器之间的文件传输？A HTMLB HTTP D Telnet019哪个应用层协议中规定了Microsoft 网络中用于文件共享的服务？A DHCPB DNS D SMTP E Telnet020服务器上的应用层通常如何处理多客户端服务请求？A终止与服务的所有连接B拒绝与单一守护程序的多个连接C暂停当前连接，建立新连接第四章OSI传输层001下列哪两项是用户数据报协议(UDP) 的功能？（选择两项）A流量控制 D 面向连接E 序列和确认002请参见图示。

此Wireshark 捕获输出的第7 行中执行的是哪一项TCP 操作？A会话创建B 数据段重传C 数据传输D 会话断开003数据段的TCP 报头中为什么包含端口号？A指示转发数据段时应使用的正确路由器接口B 标识接收或转发数据段时应使用的交换机端口C确定封装数据时应使用的第3 层协议让接收主机转发数据到适当的应用程序E让接收主机以正确的顺序组装数据包004OSI 模型哪一层负责规范信息从源设备到目的设备准确可靠地流动？A应用层 B 表示层 C 会话层传输层 E 网络层005请参见图示。

CCNA第一学期各章知识题及答案解析

诶了我累了目录第二章网络通信P2-8第三章应用层功能及协议P9-14 第四章OSI传输层P15-20第五章OSI网络层P21-27第六章网络编址-IPv4 P28-34第七章数据链路层P35-40第八章OSI物理层P41-45第九章以太网P46-51第十章网络规划和布线P52-61 第十一章配置和测试网络P62-70 第一学期末考试P71-91文档末尾返回目录第二章网络通信001 TCP/IP 网络接入层有何作用？路径确定和数据包交换数据表示、编码和控制可靠性、流量控制和错误检测详细规定构成物理链路的组件及其接入方法将数据段划分为数据包002下列哪些陈述正确指出了中间设备在网络中的作用？（选择三项）确定数据传输路径发起数据通信重新定时和重新传输数据信号发送数据流管理数据流数据流最后的终止点003下列哪三项陈述是对局域网(LAN) 最准确的描述？（选择三项）LAN 通常位于一个地域内。

此类网络由由一个组织管理。

LAN 中的不同网段之间一般通过租用连接的方式连接。

此类网络的安全和访问控制由服务提供商控制。

LAN 为同一个组织内的用户提供网络服务和应用程序访问。

此类网络的每个终端通常都连接到电信服务提供商(TSP)。

004 什么是PDU？传输期间的帧损坏在目的设备上重组的数据因通信丢失而重新传输的数据包特定层的封装005 OSI 模型哪两层的功能与TCP/IP 模型的网络接入层相同？（选择两项）网络层传输层物理层数据链路层会话层006请参见图示。

所示网络属于哪一类型？WANMANLANWLAN007 以下哪种特征正确代表了网络中的终端设备？管理数据流发送数据流重新定时和重新传输数据信号确定数据传输路径008 第4 层端口指定的主要作用是什么？标识本地介质中的设备标识源设备和目的设备之间的跳数向中间设备标识通过该网络的最佳路径标识正在通信的源终端设备和目的终端设备标识终端设备内正在通信的进程或服务009 请参见图示。

CCNA 1 Final Exam Answer v5

9. What function does pressing the Tab key have when entering a command in IOS?
It aborts the current command and returns to configuration mode. It exits configuration mode and returns to user EXEC mode. It moves the cursor to the beginning of the next line. It completes the remainder of a partially typed word in a command.
2. A host is accessing a Web server on a remote network. Which three functions are performed by intermediary network devices during this conversation? (Choose three.)
CCNA 1 Final Exam Answer 003 (v5.02, 2015)
My Switch(config)#? Switch(config)#? MySwitch(config)#? My(config)#? Switch#
11. Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the administrator uses Telnet to connect to the switch, which password is needed to access user EXEC mode?

CCNA第1章考试答案学习资料

••试题反馈报告Introduction to Networks (版本6.00) - ITN 第1 章考试以下是针对您未获得满分的试题给出的反馈。

某些交互式试题可能不显示您的答案。

分项分数：1某公司正在考虑是使用客户端/服务器还是对等网络。

下列哪三项是对等网络的特征？（选择三项。

）正确响应您的响应易于创建同时充当客户端和服务器时设备性能更好可扩展安全性提升缺少集中管理实施成本更少由于不需要使用网络设备和专用服务器，对等网络易于创建，复杂性更低，且成本更少。

而且对等网络也没有集中管理。

这种网络安全性更低，不可扩展，而且那些同时充当客户端和服务器的设备可能性能更差。

此试题参考以下领域的内容：Introduction to Networks• 1.1.2 提供网络资源2哪种设备的功能是确定消息在网际网络中传输的路径？正确响应您的响应路由器防火墙Web 服务器DSL 调制解调器路由器用于确定消息在网络中的传输路径。

防火墙用于过滤传入和传出的流量。

DSL 调制解调器用于为家庭或组织提供Internet 连接。

此试题参考以下领域的内容：Introduction to Networks• 1.2.1 网络组件3哪两个条件有助于您从各种网络介质当中选择一种网络介质？（请选择两项。

）正确响应您的响应网络上使用的终端设备的成本所选介质可以成功传送信号的距离需要优先处理的数据类型安装在网络中的中间设备的数量要安装所选介质的环境选择网络介质的条件包括：所选介质可以成功传送信号的距离、要安装所选介质的环境、必须传输的数据量和速度以及介质和安装的成本。

此试题参考以下领域的内容：Introduction to Networks• 1.2.1 网络组件4下列哪两项描述了中间设备？（选择两项。

）正确响应您的响应中间设备可以引导数据路径。

中间设备可以生成数据内容。

中间设备可以启动封装过程。

中间设备可以更改数据内容。

中间设备可以将单个主机连接到网络中。

思科CCNA第一学期期末考试答案Final

1下列哪个端口号范围为服务器上运行的应用程序常用的服务而保留？0 到2550 到10231024 到4915149152 到655352以下哪组网络ID 和子网掩码正确标识了从172.16.128.0 到172.16.159.255 的所有IP 地址？172.16.128.0 255.255.255.224172.16.128.0 255.255.0.0172.16.128.0 255.255.192.0172.16.128.0 255.255.224.0172.16.128.0 255.255.255.1923以下哪个OSI 协议层提供面向连接的可靠数据通信服务？应用层演示文稿会话传输层network4何时必须使用clock rate命令配置路由器串行接口？当该接口充当DTE 设备时当该接口计时器已经清除时当连接的DTE 设备关闭时当该接口充当DCE 设备时5下列哪些是私有IP 地址的地址范围？（选择三项。

）10.0.0.0 到10.255.255.255200.100.50.0 到200.100.25.255150.150.0.0 到150.150.255.255172.16.0.0 到172.31.255.255192.168.0.0 到192.168.255.255127.16.0.0 到127.31.255.2556请参见图示。

每条介质链路都已标记。

应该使用哪种类型的电缆连接不同设备？连接 1 - 全反电缆连接 3 - 交叉电缆连接 1 - 交叉电缆连接 3 - 交叉电缆连接 1 - 直通电缆连接 3 - 交叉电缆连接 1 - 直通电缆连接 3 - 直通电缆连接 1 - 交叉电缆连接 3 - 交叉电缆7请参见图示。

IP 地址192.168.33.2 代表什么？主机的默认网关。

主机的IP 地址。

主机的首选域名服务器。

网站resolver1.mooki.local 的IP 地址。

主机的主页IP 地址。

CCNA 5.0路由和交换：网络简介第4章网络接入层(练习和答案)

快速以太网的吞吐量为 80 Mb/s。同一时期用于建立会话、确认和封装的流量开销是 15 Mb/s。该网络的实际吞吐量是多少？
15 Mb/s
95 Mb/s 4
55 Mb/s
65 Mb/s
80 Mb/s
实际吞吐量就是给定时间内传输的可用数据（吞吐量）减去用于建立会话、确认和封装的流量开销后的结果。因此，如果吞吐量为 80 Mb/s，而流量开销为 15 Mb/s，则实际吞吐量为 80 - 15 = 65 Mb/s。
答案
说明
最高分值
correctness
of
response
Option 2 and Option 4 are correct. 1 point for each correct option.
2
鸿鹄论坛：/
答案
说明
最高分值
0 points if more options are selected than required.
答案
说明
最高分值
Opห้องสมุดไป่ตู้ion 1 and Option 3 are correct.
correctness of response 1 point for each correct option.
2
0 points if more options are selected than required.
答案
说明
最高分值
correctness
of
response
2 0
points points
for for
Option 2 any other
option 2
7
请参见图示。图中显示的终端存在什么问题？使用的插孔是 RJ-11 连接器，而不是 RJ-45 连接器。电缆没有屏蔽。

CCNA第一学期第五章答案

C C N A第一学期第五章答案集团文件版本号：（M928-T898-M248-WU2669-I2896-DQ586-M1988）最新CCNA第一学期第五章答案一个 MAC 地址包含 6 个字节。

前 3 个字节用于供应商标识，最后 3 个字节必须在同一 OUI 中分配唯一的值。

MAC 地址在硬件中实施。

网卡需要使用 MAC 地址来通过 LAN 通信。

IEEE 规范了 MAC 地址。

争用方法具有不确定性，没有受控访问方法中遇到的开销。

因为设备不需要轮流访问介质，所以无需跟踪次序。

争用方法在介质使用率高的情况下无法很好地扩展。

逻辑链路控制在软件中实施，能够让数据链路层与协议簇的上层协议通信。

网卡驱动程序软件直接与网卡上的硬件交互，可在 MAC 子层和物理介质之间传输数据。

逻辑链路控制在 IEEE 802.2 标准中指定。

IEEE 802.3 是定义不同以太网类型的一组标准。

MAC（介质访问控制）子层负责定位和检索介质上和介质外的帧。

组播 MAC 地址是一个特殊的十六进制数值，以 01-00-5E 开头。

然后将IP 组播组地址的低 23 位换算成以太网地址中剩余的 6 个十六进制字符，作为组播 MAC 地址的结尾。

MAC 地址的剩余位始终为“0”。

在此例中：224（十进制）=> 01-00-5E34（十进制）= 00100010（二进制）= 22（十六进制）56（十进制）= 00111000（二进制）= 38（十六进制）综合结果：01:00:5E:0B:22:38如果整个路径都基于以太网，则目的和源 MAC 地址将随着每个路由器跳数发生变化。

除非网络地址转换处于活动状态，否则目的 IP 地址在整个路径中保持不变。