量具、热处理英文词汇

合集下载

101个热处理常用机械英文词汇

101个热处理常用机械英文词汇1. indication 缺陷2. test specimen 试样3. bar 棒材4. stock 原料5. billet 方钢，钢方坯6. bloom 钢坯,钢锭7. section 型材8. steel ingot 钢锭9. blank 坯料，半成品10. cast steel 铸钢11. nodular cast iron 球墨铸铁12. ductile cast iron 球墨铸铁13. bronze 青铜14. brass 黄铜15. copper 合金16. stainless steel不锈钢17. decarburization 脱碳18. scale 氧化皮19. anneal 退火20. process anneal 进行退火21. quenching 淬火22. normalizing 正火23. Charpy impact text 夏比冲击试验24. fatigue 疲劳25. tensile testing 拉伸试验26. solution 固溶处理27. aging 时效处理28. Vickers hardness维氏硬度29. Rockwell hardness 洛氏硬度30. Brinell hardness 布氏硬度31. hardness tester硬度计32. descale 除污，除氧化皮等33. ferrite 铁素体34. austenite 奥氏体35. martensite马氏体36. cementite 渗碳体37. iron carbide 渗碳体38. solid solution 固溶体39. sorbite 索氏体40. bainite 贝氏体41. pearlite 珠光体42. nodular fine pearlite/ troostite屈氏体43. black oxide coating 发黑44. grain 晶粒45. chromium 铬46. cadmium 镉47. tungsten 钨48. molybdenum 钼49. manganese 锰50. vanadium 钒51. molybdenum 钼52. silicon 硅53. sulfer/sulphur 硫54. phosphor/ phosphorus 磷55. nitrided 氮化的56. case hardening 表面硬化，表面淬硬57. air cooling 空冷58. furnace cooling 炉冷59. oil cooling 油冷60. electrocladding /plating 电镀61. brittleness 脆性62. strength 强度63. rigidity 刚性,刚度64. creep 蠕变65. deflection 挠度66. elongation 延伸率67. yield strength 屈服强度68. elastoplasticity 弹塑性69. metallographic structure 金相组织70. metallographic test 金相试验71. carbon content 含碳量72. induction hardening 感应淬火73. impedance matching 感应淬火74. hardening and tempering 调质75. crack 裂纹76. shrinkage 缩孔，疏松77. forging 锻（件）78. casting 铸（件）79. rolling 轧（件）80. drawing 拉（件）81. shot blasting 喷丸（处理）82. grit blasting 喷钢砂（处理）83. sand blasting 喷砂（处理）84. carburizing 渗碳85. nitriding 渗氮86. ageing/aging 时效87. grain size 晶粒度88. pore 气孔89. sonim 夹砂90. cinder inclusion 夹渣91. lattice晶格92. abrasion/abrasive/rub/wear/wearing resistance (property) 耐磨性93. spectrum analysis光谱分析94. heat/thermal treatment 热处理95. inclusion 夹杂物96. segregation 偏析97. picking 酸洗，酸浸98. residual stress 残余应力99. remaining stress 残余应力100. relaxation of residual stress 消除残余应力101. stress relief 应力释放。

热处理英语缩写

热处理（Heat Treatment）的英语缩写通常是HT。

这个缩写常常在工程、制造业和材料科学领域使用，表示对金属或合金材料进行控制的加热和冷却过程，以改变其物理性质和机械性能。

热处理可以包括退火、淬火、正火、回火等不同的过程，用来调整材料的硬度、强度、韧性等性质。

除了HT，热处理还可以使用其他缩写和术语，具体取决于上下文和特定的热处理过程。

以下是一些常见的热处理缩写和术语：Annealing（退火）：缩写通常是A，如"AA"表示全退火。

Quenching（淬火）：缩写通常是Q，如"QQ"表示快速淬火。

Tempering（回火）：缩写通常是T，如"TT"表示双回火。

Normalizing（正火）：缩写通常是N，如"NN"表示双正火。

Precipitation Hardening（时效硬化）：缩写通常是PH，如"PH1550"表示时效硬化处理。

Solution Heat Treatment（固溶处理）：缩写通常是SHT，如"SHT800"表示固溶处理。

Stress Relieving（应力退火）：缩写通常是SR，如"SR500"表示应力退火。

Isothermal Treatment（等温处理）：缩写通常是IT，如"IT1000"表示等温处理。

Carburizing（渗碳处理）：缩写通常是C，如"HC"表示渗碳处理。

Nitriding（氮化处理）：缩写通常是N，如"HN"表示氮化处理。

这些缩写和术语可根据不同的行业和材料来使用，以描述特定的热处理过程。

在特定的热处理规范或标准中，可能会使用不同的缩写，因此需要根据上下文来理解其含义。

量具检具英文对照

51 调准 gauging52 调整 adjustment量"具"类1.量块gauge block2.光滑极限量规plain limit gauge3.塞规plug gauge4.环规ring gauge卡规snap gauge5.塞尺feeler gauge6.钢直尺steel gauge7.精密玻璃线纹尺precision glass linear scale8.精密金属线纹尺precision metal linear scale9.半径样板radius template卡尺类1.游标卡尺vernier caliper2.带表卡尺dial caliper3.电子数显卡尺calliper with electronic digital display4.深度标游卡尺depth vernier caliper5.电子数显深度卡尺depth caliper with electronic digital display6.带表高度卡尺dial height calliper7.高度游标卡尺height vernier caliper8.电子数显高度卡尺height caliper with electronic digital display9.焊接检验尺calliper for welding inspection千分尺类1.测微头micrometer head2.外径千分尺external micrometer3.杠杆千分尺micrometer with dial comparator4.带计数器千分尺micrometer with counter5.电子数显外径千分尺micrometer with electronic digital display6.小测头千分尺small anvil micrometer7.尖头千分尺point micrometer8.板厚千分尺sheet metal micrometer9.壁厚千分尺tube micrometer10.叶片千分尺blade micrometer11.奇数沟千分尺odd fluted micrometer12.深度千分尺depth micrometer13.内径千分尺internal micrometer14.单杆式内径千分尺single-body internal micrometer15.表式内径千分尺 dail internal micrometer16.三爪式内径千分尺three point internal micrometer17.电子数显三爪式内径千分尺three point internal micrometer18.内测千分尺inside micrometer指示表类1.指示表 dial indicator2.深度指示表depth dial indicator3.杠杆指示表dial test indicator4.内径指示表bore dial indicator5.涨弹簧式指示表 expanding head bore dial indicator6.钢球式内径指示表ball type bore dial indicator7.电子数显指示表dial indicator with electronic digital display8.杠杆卡规indicating snap gauge9.带表卡规dial snap gauge10.带表外卡规outside dial snap gauge11.带表内卡规inside dial snap gauge12.测厚规thickness gauge13.扭簧比较仪microcator14.杠杆齿轮比较仪mechanical dial comparator15.电子量规electronic gauge16.电感式传感器inductance type transducer17.指示装置indicating device18.电感测微仪inductance micrometer19.峰值电感测微仪peak inductance micrometer20.电感内径比较仪inductance bore comparator21.瞄准传感器aiming transducer角度测量器具1.角度块angle block gauge2.正多面棱体regular polygon mirror3.刀具角度样板cutter angular template4.直角尺square5.平行直角尺parallel square6.宽座直角尺wide-stand square7.刀口形直角尺edge square8.矩形直角尺square square9.三角形直角尺three angle square10.圆柱直角尺cylinder square11.方形角尺square guage12.万能角度尺universal bevel protractor13.游标式万能角度尺vernier universal bevel protractor14.表式万能角度尺dial universal bevel protractor15.光学分度头optical dividing head16.目镜式光学分度头optical dividing head with microscope reading17.投影式光学分度尺optical dividing head with projection reading18.光电分度头optical-electronic dividing head19.多齿分度台multi-tooth division table20.分度转台division rotary table21.正炫规sine bar22.普通正炫规general sine bar23.铰链式正炫规hinge type sine bar24.双向正炫规dual-directional sine bar25.圆锥量规cone gauge26.圆锥塞规plug cone gauge27.圆锥环规ring cone gauge28.直角尺测量仪square measuring instrument形位误差测量器具1.平晶optical flat2.单面平晶optical flat3.双面平晶parallel optical flat4.刀口形直尺knife straight edge5.刀口尺knife straight edge6.三棱尺three edges straight edge7.四棱尺four edges straight edge8.平尺straight edge9.矩形平尺square straight edge10.工字形平尺i-beam straight edge11.角形平尺angle straight edge12.桥形平尺bridge type straight edge13.平板surface plate14.铸铁平板cast iron surface plate15.岩石平板granite surface plate16.方箱square box17.水准器式水平仪level meter18.条式水平仪bar level meter19.框式水平仪frame level meter20.合像水平仪imaging level meter21.光学倾斜仪optical inclinometer22.电子水平仪electronic level meter23.指针式电子水平仪electronic level meter with indicator24.数显式电子水平仪electronic level meter with digital display25.平直度测量仪straightness measuring instrument26.光学式平直度测量仪optical straightness measuring instrument27.光电式平直度测量仪photoelectrical straightness measuring instrument28.圆度测量仪roundness measuring instrument29.转轴式圆度测量仪spindle-rotating type roundness measuring instrument30.转台式圆度测量仪table-rotating type roundness measuring instrument表面质量测量器具表面粗糙度比较样块surface roughness comparison specimen铸造表面粗糙度比较样块surface roughness comparison specimen for cast surface磨、车、镗、铣、插及刨加工表面粗糙度比较样块surface roughness comparison specimen for ground,turned,bored,milled,shaped and planed surface电火花加工表面粗糙度比较样块surface roughness comparison specimen for spark-erosion machined surface抛（喷）丸、喷砂加工表面粗糙度比较样块surface roughness comparison specimen for shot blasted and grit blasted surface抛光加工表面粗糙度测量仪portable surface roughness comparison specimen for polished surface 便携式表面粗糙度测量仪portable surface roughess measuring instrument驱动箱driving box台式表面粗糙度测量仪bench type surface roughness measuring instrumentNose bridge 鼻中 Tip 脚套Temple 脚丝 Plating 电镀Printing 印字 Lase 镭射Spectacle frames 眼镜架 Sunglasses 太阳眼镜Sports spectacles 运动眼镜 kid's eyewear 儿童眼镜Reading glasses 老花镜 Contact lens 隐形眼镜Glass optical lenses 玻璃镜片 Plastic optical lenses 塑胶镜片Sunglasses lenses, sun clips 太阳镜片、镜夹 Progressive lenses 渐进多焦点镜片 Photochromic lenses 变色镜片 Othro k lenses 角膜矫形接确镜片Optical blanks 镜片毛胚 Accessories for contact lens 隐形眼镜附件Spectacle spare parts and accessories 眼镜零件及配件 Components of frames 镜架组件 Spectacle cases & accessories 眼镜盒及附件 Eyecare products and solution for lenses and contace lenses 眼睛护理产品及隐形眼镜洁液Spectacle cases & accessories 眼镜盒及其它配件 Lens demisting cloths and solutions 镜片除雾喷剂及清洁布Spectacle assembling & adjusting tools 眼镜加工、装配、调较工具 Visual test equipment 验眼设备Edger 磨边机 Eyeglasses and frame making machinery 眼镜架制造机械Lens manufacturing and processing machinery 镜片造机械及加工机械 Contact lens processing machinery 隐形眼镜加工机械Lathe 车床 Coating machine 镀膜机Coating materials 镀膜原料 Electroplating equipment, welding machine 电镀机械、焊接机械 Price labeling, stamp printing and screen printing mahcinery 标签机、移印机、丝网印刷 Ultrasonic cleaning equipment 超声波清洁仪器Ophthalmic products 眼科用品 Concentrates for ultrasonic cleaning 超声波清洁剂Lens grinding and polishing filtration systems 镜片研磨及抛光过滤系统 Optical processing equipmentand materials 光学加工设备及原料Measurement instrucments for optical elements and systems 光学用品及系统之测量仪器 Store and workshop fitting and furniture 眼镜店及工场设备及家具Moulds for ophthalmic lenses 镜片模具 Raw materials for frames 眼镜原料Raw materials for lenses 镜片原料 Lens abrasive and polishing materials 打磨镜片原料 Electroplating, welding materials 电镀、焊接原材料 Opto-laser equipment and instruments 激光科技设备和仪器机械英语单词冲床punching machine机械手robot油压机hydraulic machine车床 lathe刨床planer |'plein?|铣床miller磨床grinder（钻床）driller线切割linear cutting金属切削 metal cutting机床 machine tool金属工艺学 technology of metals 刀具 cutter摩擦 friction联结 link传动 drive/transmission轴 shaft弹性 elasticity频率特性 frequency characteristic 误差 error响应 response定位 allocation机床夹具 jig动力学 dynamic运动学 kinematic静力学 static分析力学 analyse mechanics拉伸 pulling压缩 hitting剪切 shear扭转 twist弯曲应力 bending stress强度 intensity三相交流电 three-phase AC磁路 magnetic circles 变压器 transformer异步电动机 asynchronous motor几何形状 geometrical精度 precision正弦形的 sinusoid交流电路 AC circuit机械加工余量 machining allowance变形力 deforming force变形 deformation应力 stress硬度 rigidity热处理 heat treatment退火 anneal正火 normalizing脱碳 decarburization渗碳 carburization电路 circuit半导体元件 semiconductor element反馈 feedback发生器 generator直流电源 DC electrical source门电路 gate circuit逻辑代数 logic algebra外圆磨削 external grinding内圆磨削 internal grinding平面磨削 plane grinding变速箱 gearbox离合器 clutch绞孔 fraising绞刀 reamer螺纹加工 thread processing螺钉 screw铣削 mill铣刀 milling cutter功率 power工件 workpiece齿轮加工 gear mechining齿轮 gear主运动 main movement主运动方向 direction of main movement进给方向 direction of feed进给运动 feed movement合成进给运动 resultant movement of feed合成切削运动 resultant movement of cutting合成切削运动方向 direction of resultant movement of cutting 切削深度 cutting depth前刀面 rake face刀尖 nose of tool前角 rake angle后角 clearance angle龙门刨削 planing主轴 spindle主轴箱 headstock卡盘 chuck加工中心 machining center车刀 lathe tool车床 lathe钻削镗削 bore车削 turning磨床 grinder基准 benchmark钳工 locksmith锻 forge压模 stamping焊 weld拉床 broaching machine拉孔 broaching装配 assembling铸造 found流体动力学 fluid dynamics流体力学 fluid mechanics加工 machining液压 hydraulic pressure切线 tangent机电一体化 mechanotronics mechanical-electrical integration 气压 air pressure pneumatic pressure稳定性 stability介质 medium液压驱动泵 fluid clutch液压泵 hydraulic pump阀门 valve失效 invalidation强度 intensity载荷 load应力 stress安全系数 safty factor可靠性 reliability螺纹 thread螺旋 helix键 spline销 pin滚动轴承 rolling bearing滑动轴承 sliding bearing弹簧 spring制动器 arrester brake十字结联轴节 crosshead联轴器 coupling链 chain皮带 strap精加工 finish machining粗加工 rough machining变速箱体 gearbox casing腐蚀 rust氧化 oxidation磨损 wear耐用度 durability随机信号 random signal离散信号 discrete signal超声传感器 ultrasonic sensor集成电路 integrate circuit挡板 orifice plate残余应力 residual stress套筒 sleeve扭力 torsion冷加工 cold machining电动机 electromotor汽缸 cylinder过盈配合 interference fit热加工 hotwork摄像头 CCD camera倒角 rounding chamfer优化设计 optimal design工业造型设计 industrial moulding design有限元 finite element滚齿 hobbing插齿 gear shaping伺服电机 actuating motor铣床 milling machine钻床 drill machine镗床 boring machine步进电机 stepper motor丝杠 screw rod导轨 lead rail组件 subassembly可编程序逻辑控制器 Programmable Logic Controller PLC 电火花加工 electric spark machining电火花线切割加工 electrical discharge wire - cutting 相图 phase diagram热处理 heat treatment固态相变 solid state phase changes有色金属 nonferrous metal陶瓷 ceramics合成纤维 synthetic fibre电化学腐蚀 electrochemical corrosion车架 automotive chassis悬架 suspension转向器 redirector变速器 speed changer板料冲压 sheet metal parts孔加工 spot facing machining车间 workshop工程技术人员 engineer气动夹紧 pneuma lock数学模型 mathematical model画法几何 descriptive geometry机械制图 Mechanical drawing投影 projection视图 view剖视图 profile chart标准件 standard component零件图 part drawing装配图 assembly drawing尺寸标注 size marking技术要求 technical requirements刚度 rigidity内力 internal force位移 displacement截面 section疲劳极限 fatigue limit断裂 fracture塑性变形 plastic distortion脆性材料 brittleness material刚度准则 rigidity criterion垫圈 washer垫片 spacer直齿圆柱齿轮 straight toothed spur gear 斜齿圆柱齿轮 helical-spur gear直齿锥齿轮 straight bevel gear运动简图 kinematic sketch齿轮齿条 pinion and rack蜗杆蜗轮 worm and worm gear虚约束 passive constraint曲柄 crank摇杆 racker凸轮 cams范成法 generation method毛坯 rough游标卡尺 slide caliper千分尺 micrometer calipers攻丝 tap光学仪器类 △Topslit illumination 裂隙灯 diopter 屈光度 sphere 球镜cylinder 柱镜 prism 棱镜 magnification 放大倍率diameter 直径 dimensions 尺寸 light spot 光斑fixation lamp 固视灯 led 发光二极管 filter 滤色片lensmeter 焦度计 metal rim 金属圈 PD meter 瞳距仪Pupil Distance 瞳距 Vertex Distance 顶点距 Chart 视标View tester 验光仪 Cutting device 切割刀 Pattern maker 制模机Cutting needle 划针 Layout blocker 中心仪 Hand edger 手动磨边机Lens groover 开槽机 Polisher 抛光机 Polishing stick 抛光膏Drilling machine 钻孔机 Bench drilling machine 台式钻孔机 Drill bit 钻头Lock opener 锁开 Milling cutting 铣刀 Fuse 保险丝Handle 手柄 Center locator 中心定位器 Drill chuck 钻夹头Dial 刻度盘 Frame heater（warmer）烘架机 Heating coil 发热丝Ultrasonic cleaner 清洗机 Combined table 验光组合台 Optometry box 验光盘Grinding wheel 砂轮 Trial lens set 验光镜片箱 Refractometer 验光仪Chart projector 投影仪 Keratometer 角膜曲率仪 Welding machine 焊接机Spray cleaning machine 喷淋清洗机材料配件类 △TopMonel 锰料 Stainless Steel 不锈钢 pure Titanium 纯钛Titanium Alloy 钛合金 B-Ti B钛 Elongation 伸长率Tensile strenghth 抗拉强度 high nickel copper alloy 高镍合金 nickelfree alloy 无镍合金 nicklfree stainless steel 无镍不锈钢 annealing temperture 退火温度 percent 含量 density 密度 melting point 熔点 solidus 固相点liquidus 液相点 physical properties 物理性能 chemical composition 化学组成hinge 铰链 rim wire 框线 round wire 圆线cylinding grinding wheels 筒形砂轮 flaring cup wheels 碗形砂轮 diamod plain wheels 平形砂轮 grinding ccoolant 切削液 lens coating liquid 护镜液 polishing powder 抛光粉polishing liquid 抛光液 polishing wheel 抛光轮 plating case 电镀盒plastic case 塑料盒 alumium oxide case 氧化铝盒 rocket screwdrivers 六角螺丝刀mini ring wrenches/nutdrivers 微型戒指扳手 radian apparatus 弧度表 thickness apparatus 厚度表 adhesive tape 粘片 calipers 量具 nut driver 套筒files set 锉刀 drill bits 钻咀 screwdrivers blades 螺丝刀头镜片类 △Tophard resin lens 树脂镜片 round-top bifocal lens 圆顶双关镜片 flat-top bifocal lens 平顶双光镜片aspheric hard resin lens 非球面树脂镜片 Non-coated lens 基片（NC） hard coated lens 加硬镜片（HC）Hard & Multi-coated 加硬加膜片（HMC） Hard & Multi-coated,EMI Defending Coating 加硬加膜防辐射片（HMC+EMI） RX Lens-High Index 高散光片color shade 色差 deformation 变形 shrinkage 缩水light transmission 透光率 de-lamination 分裂脱层 abbe value 阿贝数raw material 原材料 catalysis 催化作用 polymerization 聚合作用tinted lens 染色镜片 photochromic lens 变色镜片 spherical 球面的autocollimator 自动准直机bench comparator 比长仪block gauge 块规bore check 精密小测定器calibration 校准caliper gauge 卡规check gauge 校对规clearance gauge 间隙规clinoretee 测斜仪comparator 比测仪cylinder square 圆筒直尺depth gauge 测深规dial indicator 针盘指示表dial snap gauge 卡规digital micrometer 数位式测微计feeler gauge 测隙规gauge plate 量规定位板height gauge 测高规inside calipers 内卡钳inside micrometer 内分测微计interferometer 干涉仪leveling block 平台limit gauge 限规micrometer 测微计mil 千分之一寸monometer 压力计morse taper gauge 莫氏锥度量规nonius 游标卡尺optical flat 光学平晶optical parallel 光学平行passimeter 内径仪position scale 位置刻度profile projector 轮廓光学投影仪protractor 分角器radius 半径ring gauge 环规sine bar 正弦量规snap gauge 卡模square master 直角尺stylus 触针telescopic gauge 伸缩性量规working gauge 工作量规。

量具检具英文对照

量具检具英文对照51调准gauging52调整adjustment量"具"类1.量块gauge block2.光滑极限量规plain limit gauge3.塞规plug gauge4.环规ring gauge卡规snap gauge5.塞尺feeler gauge6.钢直尺steel gauge7.精密玻璃线纹尺precision glass linear scale8.精密金属线纹尺precision metal linear scale9.半径样板radius template卡尺类1.游标卡尺vernier caliper2.带表卡尺dial caliper3.电子数显卡尺calliper with electronic digital display4.深度标游卡尺depth vernier caliper5.电子数显深度卡尺depth caliper with electronic digital display6.带表高度卡尺dial height calliper7.高度游标卡尺height vernier caliper8.电子数显高度卡尺height caliper with electronic digital display9.焊接检验尺calliper for welding inspection千分尺类1.测微头micrometer head2.外径千分尺external micrometer3.杠杆千分尺micrometer with dial comparator4.带计数器千分尺micrometer with counter5.电子数显外径千分尺micrometer with electronic digital display6.小测头千分尺small anvil micrometer7.尖头千分尺point micrometer8.板厚千分尺sheet metal micrometer9.壁厚千分尺tube micrometer10.叶片千分尺blade micrometer11.奇数沟千分尺odd fluted micrometer12.深度千分尺depth micrometer13.内径千分尺internal micrometer14.单杆式内径千分尺single-body internal micrometer15.表式内径千分尺dail internal micrometer16.三爪式内径千分尺three point internal micrometer17.电子数显三爪式内径千分尺three point internal micrometer18.内测千分尺inside micrometer指示表类1.指示表dial indicator2.深度指示表depth dial indicator3.杠杆指示表dial test indicator4.内径指示表bore dial indicator5.涨弹簧式指示表expanding head bore dial indicator6.钢球式内径指示表ball type bore dial indicator7.电子数显指示表dial indicator with electronic digital display8.杠杆卡规indicating snap gauge9.带表卡规dial snap gauge10.带表外卡规outside dial snap gauge11.带表内卡规inside dial snap gauge12.测厚规thickness gauge13.扭簧比较仪microcator14.杠杆齿轮比较仪mechanical dial comparator15.电子量规electronic gauge16.电感式传感器inductance type transducer17.指示装置indicating device18.电感测微仪inductance micrometer19.峰值电感测微仪peak inductance micrometer20.电感内径比较仪inductance bore comparator21.瞄准传感器aiming transducer角度测量器具1.角度块angle block gauge2.正多面棱体regular polygon mirror3.刀具角度样板cutter angular template4.直角尺square5.平行直角尺parallel square6.宽座直角尺wide-stand square7.刀口形直角尺edge square8.矩形直角尺square square9.三角形直角尺three angle square10.圆柱直角尺cylinder square11.方形角尺square guage12.万能角度尺universal bevel protractor13.游标式万能角度尺vernier universal bevel protractor14.表式万能角度尺dial universal bevel protractor15.光学分度头optical dividing head16.目镜式光学分度头optical dividing head with microscope reading17.投影式光学分度尺optical dividing head with projection reading18.光电分度头optical-electronic dividing head19.多齿分度台multi-tooth division table20.分度转台division rotary table21.正炫规sine bar22.普通正炫规general sine bar23.铰链式正炫规hinge type sine bar24.双向正炫规dual-directional sine bar25.圆锥量规cone gauge26.圆锥塞规plug cone gauge27.圆锥环规ring cone gauge28.直角尺测量仪square measuring instrument形位误差测量器具1.平晶optical flat2.单面平晶optical flat3.双面平晶parallel optical flat4.刀口形直尺knife straight edge5.刀口尺knife straight edge6.三棱尺three edges straight edge7.四棱尺four edges straight edge8.平尺straight edge9.矩形平尺square straight edge10.工字形平尺i-beam straight edge11.角形平尺angle straight edge12.桥形平尺bridge type straight edge13.平板surface plate14.铸铁平板cast iron surface plate15.岩石平板granite surface plate16.方箱square box17.水准器式水平仪level meter18.条式水平仪bar level meter19.框式水平仪frame level meter20.合像水平仪imaging level meter21.光学倾斜仪optical inclinometer22.电子水平仪electronic level meter23.指针式电子水平仪electronic level meter with indicator24.数显式电子水平仪electronic level meter with digital display25.平直度测量仪straightness measuring instrument26.光学式平直度测量仪optical straightness measuring instrument27.光电式平直度测量仪photoelectrical straightness measuring instrument28.圆度测量仪roundness measuring instrument29.转轴式圆度测量仪spindle-rotating type roundness measuring instrument30.转台式圆度测量仪table-rotating type roundness measuring instrument表面质量测量器具表面粗糙度比较样块surface roughness comparison specimen铸造表面粗糙度比较样块surface roughness comparison specimen for cast surface磨、车、镗、铣、插及刨加工表面粗糙度比较样块surface roughness comparison specimen for ground,turned,bored,milled,shaped and planed surface电火花加工表面粗糙度比较样块surface roughness comparison specimen for spark-erosion machined surface抛（喷）丸、喷砂加工表面粗糙度比较样块surface roughness comparison specimen for shot blasted and grit blasted surface抛光加工表面粗糙度测量仪portable surface roughness comparison specimen for polished surface便携式表面粗糙度测量仪portable surface roughess measuring instrument驱动箱driving box台式表面粗糙度测量仪bench type surface roughness measuring instrumentNose bridge 鼻中Tip 脚套Temple 脚丝Plating 电镀Printing 印字Lase 镭射Spectacle frames 眼镜架Sunglasses 太阳眼镜Sports spectacles 运动眼镜kid's eyewear 儿童眼镜Reading glasses 老花镜Contact lens 隐形眼镜Glass optical lenses 玻璃镜片Plastic optical lenses 塑胶镜片Sunglasses lenses, sun clips 太阳镜片、镜夹Progressive lenses 渐进多焦点镜片Photochromic lenses 变色镜片Othro k lenses 角膜矫形接确镜片Optical blanks 镜片毛胚Accessories for contact lens 隐形眼镜附件Spectacle spare parts and accessories 眼镜零件及配件Components of frames 镜架组件Spectacle cases & accessories 眼镜盒及附件Eyecare products and solution for lenses and contace lenses 眼睛护理产品及隐形眼镜洁液Spectacle cases & accessories 眼镜盒及其它配件Lens demisting cloths and solutions 镜片除雾喷剂及清洁布Spectacle assembling & adjusting tools 眼镜加工、装配、调较工具Visual test equipment 验眼设备Edger 磨边机Eyeglasses and frame making machinery 眼镜架制造机械Lens manufacturing and processing machinery 镜片造机械及加工机械Contact lens processing machinery 隐形眼镜加工机械Lathe 车床Coating machine 镀膜机Coating materials 镀膜原料Electroplating equipment, welding machine 电镀机械、焊接机械Price labeling, stamp printing and screen printing mahcinery 标签机、移印机、丝网印刷Ultrasonic cleaning equipment 超声波清洁仪器Ophthalmic products 眼科用品Concentrates for ultrasonic cleaning 超声波清洁剂Lens grinding and polishing filtration systems 镜片研磨及抛光过滤系统Optical processing equipmentand materials 光学加工设备及原料Measurement instrucments for optical elements and systems 光学用品及系统之测量仪器Store and workshop fitting and furniture 眼镜店及工场设备及家具Moulds for ophthalmic lenses 镜片模具Raw materials for frames 眼镜原料Raw materials for lenses 镜片原料Lens abrasive and polishing materials 打磨镜片原料Electroplating, welding materials 电镀、焊接原材料Opto-laser equipment and instruments 激光科技设备和仪器机械英语单词冲床punching machine机械手robot油压机hydraulic machine车床lathe刨床planer |'plein?|铣床miller磨床grinder（钻床）driller线切割linear cutting金属切削metal cutting机床machine tool金属工艺学technology of metals刀具cutter摩擦friction联结link传动drive/transmission轴shaft弹性elasticity频率特性frequency characteristic误差error响应response定位allocation机床夹具jig动力学dynamic运动学kinematic静力学static分析力学analyse mechanics拉伸pulling压缩hitting剪切shear扭转twist弯曲应力bending stress强度intensity三相交流电three-phase AC磁路magnetic circles 变压器transformer异步电动机asynchronous motor几何形状geometrical精度precision正弦形的sinusoid交流电路AC circuit机械加工余量machining allowance变形力deforming force变形deformation应力stress硬度rigidity热处理heat treatment退火anneal正火normalizing脱碳decarburization渗碳carburization电路circuit半导体元件semiconductor element反馈feedback发生器generator直流电源DC electrical source门电路gate circuit逻辑代数logic algebra外圆磨削external grinding内圆磨削internal grinding平面磨削plane grinding变速箱gearbox离合器clutch绞孔fraising绞刀reamer螺纹加工thread processing螺钉screw铣削mill铣刀milling cutter功率power工件workpiece齿轮加工gear mechining齿轮gear主运动main movement主运动方向direction of main movement进给方向direction of feed进给运动feed movement合成进给运动resultant movement of feed合成切削运动resultant movement of cutting合成切削运动方向direction of resultant movement of cutting 切削深度cutting depth前刀面rake face刀尖nose of tool前角rake angle后角clearance angle龙门刨削planing主轴spindle主轴箱headstock卡盘chuck加工中心machining center车刀lathe tool车床lathe钻削镗削bore车削turning磨床grinder基准benchmark钳工locksmith锻forge压模stamping焊weld拉床broaching machine拉孔broaching装配assembling铸造found流体动力学fluid dynamics流体力学fluid mechanics加工machining液压hydraulic pressure切线tangent机电一体化mechanotronics mechanical-electrical integration 气压air pressure pneumatic pressure稳定性stability介质medium液压驱动泵fluid clutch液压泵hydraulic pump阀门valve失效invalidation强度intensity载荷load应力stress安全系数safty factor可靠性reliability螺纹thread螺旋helix键spline销pin滚动轴承rolling bearing滑动轴承sliding bearing弹簧spring制动器arrester brake十字结联轴节crosshead联轴器coupling链chain皮带strap精加工finish machining粗加工rough machining变速箱体gearbox casing腐蚀rust氧化oxidation磨损wear耐用度durability随机信号random signal离散信号discrete signal超声传感器ultrasonic sensor集成电路integrate circuit挡板orifice plate残余应力residual stress套筒sleeve扭力torsion冷加工cold machining电动机electromotor汽缸cylinder过盈配合interference fit热加工hotwork摄像头CCD camera倒角rounding chamfer优化设计optimal design工业造型设计industrial moulding design有限元finite element滚齿hobbing插齿gear shaping伺服电机actuating motor铣床milling machine钻床drill machine镗床boring machine步进电机stepper motor丝杠screw rod导轨lead rail组件subassembly可编程序逻辑控制器Programmable Logic Controller PLC 电火花加工electric spark machining电火花线切割加工electrical discharge wire - cutting相图phase diagram热处理heat treatment固态相变solid state phase changes有色金属nonferrous metal陶瓷ceramics合成纤维synthetic fibre电化学腐蚀electrochemical corrosion车架automotive chassis悬架suspension转向器redirector变速器speed changer板料冲压sheet metal parts孔加工spot facing machining车间workshop工程技术人员engineer气动夹紧pneuma lock数学模型mathematical model画法几何descriptive geometry机械制图Mechanical drawing投影projection视图view剖视图profile chart标准件standard component零件图part drawing装配图assembly drawing尺寸标注size marking技术要求technical requirements刚度rigidity内力internal force位移displacement截面section疲劳极限fatigue limit断裂fracture塑性变形plastic distortion脆性材料brittleness material刚度准则rigidity criterion垫圈washer垫片spacer直齿圆柱齿轮straight toothed spur gear斜齿圆柱齿轮helical-spur gear直齿锥齿轮straight bevel gear运动简图kinematic sketch齿轮齿条pinion and rack蜗杆蜗轮worm and worm gear虚约束passive constraint曲柄crank摇杆racker凸轮cams范成法generation method毛坯rough游标卡尺slide caliper千分尺micrometer calipers攻丝tap光学仪器类△Topslit illumination 裂隙灯diopter 屈光度sphere 球镜cylinder 柱镜prism 棱镜magnification 放大倍率diameter 直径dimensions 尺寸light spot 光斑fixation lamp 固视灯led 发光二极管filter 滤色片lensmeter 焦度计metal rim 金属圈PD meter 瞳距仪Pupil Distance 瞳距Vertex Distance 顶点距Chart 视标View tester 验光仪Cutting device 切割刀Pattern maker 制模机Cutting needle 划针Layout blocker 中心仪Hand edger 手动磨边机Lens groover 开槽机Polisher 抛光机Polishing stick 抛光膏Drilling machine 钻孔机Bench drilling machine 台式钻孔机Drill bit 钻头Lock opener 锁开Milling cutting 铣刀Fuse 保险丝Handle 手柄Center locator 中心定位器Drill chuck 钻夹头Dial 刻度盘Frame heater（warmer）烘架机Heating coil 发热丝Ultrasonic cleaner 清洗机Combined table 验光组合台Optometry box 验光盘Grinding wheel 砂轮Trial lens set 验光镜片箱Refractometer 验光仪Chart projector 投影仪Keratometer 角膜曲率仪Welding machine 焊接机Spray cleaning machine 喷淋清洗机材料配件类△TopMonel 锰料Stainless Steel 不锈钢pure Titanium 纯钛Titanium Alloy 钛合金B-Ti B钛Elongation 伸长率Tensile strenghth 抗拉强度high nickel copper alloy 高镍合金nickelfree alloy 无镍合金nicklfree stainless steel 无镍不锈钢annealing temperture 退火温度percent 含量density 密度melting point 熔点solidus 固相点liquidus 液相点physical properties 物理性能chemical composition 化学组成hinge 铰链rim wire 框线round wire 圆线cylinding grinding wheels 筒形砂轮flaring cup wheels 碗形砂轮diamod plain wheels 平形砂轮grinding ccoolant 切削液lens coating liquid 护镜液polishing powder 抛光粉polishing liquid 抛光液polishing wheel 抛光轮plating case 电镀盒plastic case 塑料盒alumium oxide case 氧化铝盒rocket screwdrivers 六角螺丝刀mini ring wrenches/nutdrivers 微型戒指扳手radian apparatus 弧度表thickness apparatus 厚度表adhesive tape 粘片calipers 量具nut driver 套筒files set 锉刀drill bits 钻咀screwdrivers blades 螺丝刀头镜片类△Tophard resin lens 树脂镜片round-top bifocal lens 圆顶双关镜片flat-top bifocal lens 平顶双光镜片aspheric hard resin lens 非球面树脂镜片Non-coated lens 基片（NC）hard coated lens 加硬镜片（HC）Hard & Multi-coated 加硬加膜片（HMC）Hard & Multi-coated,EMI Defending Coating 加硬加膜防辐射片（HMC+EMI）RX Lens-High Index 高散光片color shade 色差deformation 变形shrinkage 缩水light transmission 透光率de-lamination 分裂脱层abbe value 阿贝数raw material 原材料catalysis 催化作用polymerization 聚合作用tinted lens 染色镜片photochromic lens 变色镜片spherical 球面的autocollimator 自动准直机bench comparator 比长仪block gauge 块规bore check 精密小测定器calibration 校准caliper gauge 卡规check gauge 校对规clearance gauge 间隙规clinoretee 测斜仪comparator 比测仪cylinder square 圆筒直尺depth gauge 测深规dial indicator 针盘指示表dial snap gauge 卡规digital micrometer 数位式测微计feeler gauge 测隙规gauge plate 量规定位板height gauge 测高规inside calipers 内卡钳inside micrometer 内分测微计interferometer 干涉仪leveling block 平台limit gauge 限规micrometer 测微计mil 千分之一寸monometer 压力计morse taper gauge 莫氏锥度量规nonius 游标卡尺optical flat 光学平晶optical parallel 光学平行passimeter 内径仪position scale 位置刻度profile projector 轮廓光学投影仪protractor 分角器radius 半径ring gauge 环规sine bar 正弦量规snap gauge 卡模square master 直角尺stylus 触针telescopic gauge 伸缩性量规working gauge 工作量规。

热处理英语专业词汇

英语专业词汇:Tempering(回火), precipitation(析出), recovery(回复) Recrystallization(再结晶); quenched steel(淬火钢) Metastable structure(亚结构); equilibrium(平衡) supersaturation of martensite solid solution (马氏体固溶体过饱和)High density of crystal lattice defects(高密度晶体点阵缺陷) dislocation(位错), low- and large- angle boundary(低角度和高角度晶界); twin interlayers(孪晶界); substructure(亚结构) Segregation(偏析)英语专业词汇:Overcooling (sub-cooling) austenite;(过冷奥氏体); Continuous cooling transformation curve(连续冷却转变曲线) Continuous cooling transformation diagram(连续冷却转变图) Pearlite (colony),珠光体(团); globular pearlite(粒状珠光体);Lamellar pearlite(片状Sorbite(索氏体); troostite (屈氏体);strength(强度);yield strength(屈服强度); ductility(塑性)Mechanism(机理), phase transformation mechanism(相变机理)专业英语词汇:Martensite (马氏体); bainite (贝氏体)Plate martensite (片状马氏体); lath martensite (板条马氏体); Upper bainite(上贝氏体); lower bainite(下贝氏体); Granular bainite(粒状贝氏体）；carbide-free bainite(无碳贝氏体）Acicular ferrite (针状铁素体); retained austenite (残余奥氏体)Thermodynamic stability(热力学稳定性); metastable phase(亚稳相)；shear transformation（切变转变）Face-centred cubic structure(面心立方结构);body-centred cubic structure(体心立方结构);Carbide-forming element(碳化物形成元素)英文词汇:Inherent grain size of austenite(奥氏体本质晶粒尺寸); Inherent fine grain steel(本质细晶粒钢); Isothermal cooling(等温冷却);Product(产物); Isothermal transformation diagram (等温转变图) TTT曲线,TTT curve (time-temperature-transformation curve), C curve, C曲线;英语词汇:Steel Heat Treatment(钢的热处理);Eutectoid(共析体); Hypo-eutectoid structure;Hyper-eutectoidAustenite(奥氏体); Ferrite(铁素体)Pearlite(珠光体); Cementite(渗碳体);carbide(碳化物)Phase Diagram(相图); Phase Transformation(相变);Diffusion transformation(扩散性相变)Austenitization(奥氏体化); nucleation(形核);Growth(生长);Homogenization(均匀化)。

常用热处理术语中英对照

常用热处理术语[color=000080]101个热处理常用词汇1. indication 缺陷2. test specimen 试样3. bar 棒材4. stock 原料5. billet 方钢，钢方坯6. bloom 钢坯,钢锭7. section 型材8. steel ingot 钢锭9. blank 坯料，半成品10. cast steel 铸钢11. nodular cast iron 球墨铸铁12. ductile cast iron 球墨铸铁13. bronze 青铜14. brass 黄铜15. copper 合金16. stainless steel不锈钢17. decarburization 脱碳18. scale 氧化皮19. anneal 退火20. process anneal 进行退火21. quenching 淬火22. normalizing 正火23. Charpy impact text 夏比冲击试验24. fatigue 疲劳25. tensile testing 拉伸试验26. solution 固溶处理27. aging 时效处理28. Vickers hardness维氏硬度29. Rockwell hardness 洛氏硬度30. Brinell hardness 布氏硬度31. hardness tester硬度计32. descale 除污，除氧化皮等33. ferrite 铁素体34. austenite 奥氏体35. martensite马氏体36. cementite 渗碳体37. iron carbide 渗碳体38. solid solution 固溶体39. sorbite 索氏体40. bainite 贝氏体41. pearlite 珠光体42. nodular fine pearlite/ troostite屈氏体43. black oxide coating 发黑44. grain 晶粒45. chromium 铬46. cadmium 镉47. tungsten 钨48. molybdenum 钼49. manganese 锰50. vanadium 钒51. molybdenum 钼52. silicon 硅53. sulfer/sulphur 硫54. phosphor/ phosphorus 磷55. nitrided 氮化的56. case hardening 表面硬化，表面淬硬57. air cooling 空冷58. furnace cooling 炉冷59. oil cooling 油冷60. electrocladding /plating 电镀61. brittleness 脆性62. strength 强度63. rigidity 刚性,刚度64. creep 蠕变66. elongation 延伸率67. yield strength 屈服强度68. elastoplasticity 弹塑性69. metallographic structure 金相组织70. metallographic test 金相试验71. carbon content 含碳量72. induction hardening 感应淬火73. impedance matching 感应淬火74. hardening and tempering 调质75. crack 裂纹76. shrinkage 缩孔，疏松77. forging 锻（件）78. casting 铸（件）79. rolling 轧（件）80. drawing 拉（件）81. shot blasting 喷丸（处理）82. grit blasting 喷钢砂（处理）83. sand blasting 喷砂（处理）84. carburizing 渗碳85. nitriding 渗氮86. ageing/aging 时效88. pore 气孔89. sonim 夹砂90. cinder inclusion 夹渣91. lattice晶格92. abrasion/abrasive/rub/wear/wearing resistance (property) 耐磨性93. spectrum analysis光谱分析94. heat/thermal treatment 热处理95. inclusion 夹杂物96. segregation 偏析97. picking 酸洗，酸浸98. residual stress 残余应力99. remaining stress 残余应力100. relaxation of residual stress 消除残余应力101. stress relief 应力释放[/color]。

量具检具英文对照

热处理专业英语

age hardening时效硬化ageing老化处理air hardening气体硬化air patenting空气韧化annealing退火anode effect阳极效应anodizing阳极氧化处理atomloy treatment阿托木洛伊表面austempering奥氏体等温淬火austenite奥斯田体/奥氏体bainite贝氏体banded structure条纹状组织barrel plating滚镀barrel tumbling滚筒打光blackening染黑法blue shortness青熟脆性bonderizing磷酸盐皮膜处理box annealing箱型退火box carburizing封箱渗碳bright electroplating 辉面电镀bright heat treatment 光辉热处理bypass heat treatment 旁路热处理carbide炭化物carburized case depth浸碳硬化深层carburizing渗碳cementite炭化铁chemical plating化学电镀chemical vapor deposition 化学蒸镀coarsening结晶粒粗大化coating涂布被覆cold shortness低温脆性comemtite渗碳体controlled atmosphere大气热处理corner effect锐角效应creeping discharge蠕缓放电decarburization脱碳处理decarburizing脱碳退火depth of hardening硬化深层diffusion扩散diffusion annealing扩散退火electrolytic hardening电解淬火embossing压花etching表面蚀刻gaseous cyaniding气体氧化法globular cementite球状炭化铁grain size结晶粒度granolite treatment磷酸溶液热处理graphitizing石墨退火hardenability硬化性hardenability curve硬化性曲线hardening硬化heat treatment热处理hot bath quenching热浴淬火hot dipping热浸镀induction hardening高周波硬化ion carbonitriding离子渗碳氮化ion carburizing离子渗碳处理ion plating离子电镀isothermal annealing等温退火liquid honing液体喷砂法low temperature annealing 低温退火malleablizing可锻化退火martempering麻回火处理martensite马氏体/硬化铁炭metallikon金属喷镀法metallizing真空涂膜nitriding氮化处理nitrocarburizing软氮化normalizing正常化oil quenching油淬化overageing过老化overheating过热pearlite针尖组织phosphating磷酸盐皮膜处理physical vapor deposition 物理蒸镀plasma nitriding离子氮化pre-annealing预备退火precipitation析出precipitation hardening 析出硬化press quenching加压硬化process annealing制程退火quench ageing淬火老化quench hardening淬火quenching crack淬火裂痕quenching distortion淬火变形quenching stress淬火应力ferrite肥粒铁first stage annealing第一段退火flame hardening火焰硬化flame treatment火焰处理full annealing完全退火straightening annealing矫直退火strain ageing应变老化stress relieving annealing 应力消除退火subzero treatment生冷处理supercooling过冷surface hardening表面硬化处理temper brittleness回火脆性temper colour回火颜色tempering回火tempering crack回火裂痕texture咬花thermal refining调质处理thermoechanical treatment 加工热处理time quenching时间淬火transformation变态tufftride process软氮化处理under annealing不完全退火vacuum carbonitriding真空渗碳氮化vacuum carburizing真空渗碳处理vacuum hardening真空淬火vacuum heat treatment 真空热处理vacuum nitriding真空氮化water quenching水淬火wetout浸润处理1. indication缺陷2. test specimen试样3. bar棒材4. stock原料5. billet方钢，钢方坯6. bloom钢坯,钢锭7. section型材8. steel ingot钢锭9. blank坯料，半成品10. cast steel铸钢11. nodular cast iron 球墨铸铁12. ductile cast iron球墨铸铁13. bronze青铜14. brass黄铜15. copper合金再调质recrystallization再结晶red shortness红热脆性residual stress残留应力retained austenite残留奥rust prevention防蚀salt bath quenching盐浴淬火sand blast喷砂处理seasoning时效处理second stage annealing 第二段退火secular distortion经年变形segregation偏析selective hardening部分淬火shot blast喷丸处理shot peening珠击法single stage nitriding 等温渗氮sintering烧结处理soaking均热处理softening软化退火solution treatment固溶化热处理spheroidizing球状化退火stabilizing treatment 安定化处理钼52. silicon硅53. sulfer/sulphur硫54. phosphor/ phosphorus 磷55. nitrided氮化的56. case hardening表面硬化，表面淬硬57. air cooling空冷58. furnace cooling炉冷59. oil cooling油冷60. electrocladding /plating 电镀61. brittleness脆性62. strength强度63. rigidity刚性,刚度64. creep蠕变65. deflection挠度66. elongation延伸率67. yield strength屈服强度68. elastoplasticity弹塑性69. metallographic structure 金相组织70. metallographic test金相试验71. carbon content含碳量72. induction hardening 感应淬火16. stainless steel不锈钢17. decarburization脱碳18. scale氧化皮19. anneal退火20. process anneal进行退火21. quenching淬火22. normalizing正火23. Charpy impact text 夏比冲击试验24. fatigue疲劳25. tensile testing拉伸试验26. solution固溶处理27. aging时效处理28. Vickers hardness维氏硬度29. Rockwell hardness 洛氏硬度30. Brinell hardness布氏硬度31. hardness tester硬度计32. descale除污，除氧化皮等33. ferrite铁素体34. austenite奥氏体35. martensite马氏体36. cementite渗碳体37. iron carbide渗碳体38. solid solution固溶体39. sorbite索氏体40. bainite贝氏体41. pearlite珠光体42. nodular fine pearlite/ troostite 屈氏体43. black oxide coating发黑44. grain晶粒45. chromium铬46. cadmium镉47. tungsten钨48. molybdenum钼49. manganese锰50. vanadium钒73. impedance matching感应淬火74. hardening and tempering调质75. crack裂纹76. shrinkage缩孔，疏松77. forging锻（件）78. casting铸（件）79. rolling轧（件）80. drawing拉（件）81. shot blasting喷丸（处理）82. grit blasting喷钢砂（处理）83. sand blasting喷砂（处理）84. carburizing渗碳85. nitriding渗氮86. ageing/aging时效87. grain size晶粒度88. pore气孔89. sonim夹砂90. cinder inclusion夹渣91. lattice晶格92. abrasion/abrasive/rub/wear/wearingresistance (property)耐磨性93. spectrum analysis光谱分析94. heat/thermal treatment热处理95. inclusion夹杂物96. segregation偏析97. picking酸洗，酸浸98. residual stress残余应力99. remaining stress残余应力100. relaxation of residual stress力消除残余应plating 化学电镀chemical vapor deposition 化学蒸镀coarsening 结晶粒粗大化coating 涂布被覆cold shortness 低温脆性comemtite 渗碳体controlled atmosphere 大气热处理corner effect 锐角效应creeping discharge 蠕缓放电decarburization 脱碳处理decarburizing 脱碳退火depth of hardening 硬化深层diffusion 扩散diffusion annealing 扩散退火electrolytic hardening 电解淬火embossing 压花etching 表面蚀刻ferrite 肥粒铁first stage annealing 第一段退火flame hardening 火焰硬化flame treatment 火焰处理full annealing 完全退火gaseous cyaniding 气体氧化法globular cementite 球状炭化铁grain size 结晶粒度granolite treatment 磷酸溶液热处理graphitizing 石墨退火hardenability 硬化性hardenability curve 硬化性曲线hardening 硬化heat treatment 热处理hot bath quenching 热浴淬火hot dipping 热浸镀induction hardening 高周波硬化ion carbonitriding 离子渗碳氮化ion carburizing 离子渗碳处理ion plating 离子电镀isothermal annealing 等温退火liquid honing 液体喷砂法low temperature annealing 低温退火malleablizing 可锻化退火martempering 麻回火处理martensite 马氏体/硬化铁炭metallikon 金属喷镀法metallizing 真空涂膜nitriding 氮化处理nitrocarburizing 软氮化normalizing 正常化oil quenching 油淬化overageing 过老化overheating 过热pearlite 针尖组织phosphating 磷酸盐皮膜处理physical vapor deposition 物理蒸镀plasma nitriding 离子氮化pre-annealing 预备退火precipitation 析出precipitation hardening 析出硬化press quenching 加压硬化process annealing 制程退火quench ageing 淬火老化quench hardening 淬火quenching crack 淬火裂痕quenching distortion 淬火变形quenching stress 淬火应力reconditioning 再调质recrystallization 再结晶red shortness 红热脆性residual stress 残留应力retained austenite 残留奥rust prevention 防蚀salt bath quenching 盐浴淬火sand blast 喷砂处理seasoning 时效处理second stage annealing 第二段退火secular distortion 经年变形segregation 偏析selective hardening 部分淬火shot blast 喷丸处理shot peening 珠击法single stage nitriding 等温渗氮sintering 烧结处理soaking 均热处理softening 软化退火solution treatment 固溶化热处理spheroidizing 球状化退火stabilizing treatment 安定化处理straightening annealing 矫直退火strain ageing 应变老化stress relieving annealing 应力消除退火subzero treatment 生冷处理supercooling 过冷surface hardening 表面硬化处理temper brittleness 回火脆性temper colour 回火颜色tempering 回火tempering crack 回火裂痕texture 咬花thermal refining 调质处理thermoechanical treatment 加工热处理time quenching 时间淬火transformation 变态tufftride process 软氮化处理under annealing 不完全退火vacuum carbonitriding 真空渗碳氮化vacuum carburizing 真空渗碳处理vacuum hardening 真空淬火vacuum heat treatment 真空热处理vacuum nitriding 真空氮化water quenching 水淬火wetout 浸润处理aging 时效处理air cooling 空冷anneal 退火austenite 奥氏体bainite 贝氏体bar 棒材billet 方钢，钢方坯black oxide coating 发黑blank 坯料，半成品bloom 钢坯,钢锭brass 黄铜Brinell hardness 布氏硬度brittleness 脆性bronze 青铜cadmium 镉carbon content 含碳量carburizing 渗碳case hardening 表面硬化，表面淬硬cast steel 铸钢casting 铸（件）cementite 渗碳体charpy impact text 夏比冲击试验chromium 铬cinder inclusion 夹渣copper 合金crack 裂纹creep 蠕变decarburization 脱碳deflection 挠度descale 除污，除氧化皮等drawing 拉（件）ductile cast iron 球墨铸铁elastoplasticity 弹塑性electrocladding /plating 电镀elongation 延伸率fatigue 疲劳ferrite 铁素体forging 锻（件）furnace cooling 炉冷grain size 晶粒度grain 晶粒grit blasting 喷钢砂（处理）hardening and tempering 调质hardness tester硬度计heat/thermal treatment 热处理impedance matching 感应淬火inclusion 夹杂物indication 缺陷induction hardening 感应淬火iron carbide 渗碳体lattice晶格manganese 锰martensite马氏体metallographic structure 金相组织metallographic test 金相试验molybdenum 钼molybdenum 钼nitrided 氮化的nitriding 渗氮nodular cast iron 球墨铸铁nodular fine pearlite/ troostite屈氏体normalizing 正火oil cooling 油冷pearlite 珠光体phosphor/ phosphorus 磷picking 酸洗，酸浸pore 气孔process anneal 进行退火quenching 淬火relaxation of residual stress 消除残余应力remaining stress 残余应力residual stress 残余应力rigidity 刚性,刚度Rockwell hardness 洛氏硬度rolling 轧（件）sand blasting 喷砂（处理）scale 氧化皮section 型材segregation 偏析shot blasting 喷丸（处理）shrinkage 缩孔，疏松silicon 硅solid solution 固溶体solution 固溶处理sonim 夹砂sorbite 索氏体spectrum analysis光谱分析stainless steel不锈钢steel ingot 钢锭stock 原料strength 强度stress relief 应力释放sulfer/sulphur 硫tensile testing 拉伸试验test specimen 试样tungsten 钨vanadium 钒Vickers hardness维氏硬度yield strength 屈服强度indication 缺陷test specimen 试样bar 棒材stock 原料billet 方钢，钢方坯bloom 钢坯,钢锭section 型材steel ingot 钢锭blank 坯料，半成品cast steel 铸钢nodular cast iron 球墨铸铁ductile cast iron 球墨铸铁bronze 青铜brass 黄铜copper 合金stainless steel不锈钢decarburization 脱碳scale 氧化皮anneal 退火process anneal 进行退火quenching 淬火normalizing 正火Charpy impact text 夏比冲击试验fatigue 疲劳tensile testing 拉伸试验solution 固溶处理aging 时效处理Vickers hardness维氏硬度Rockwell hardness 洛氏硬度Brinell hardness 布氏硬度hardness tester硬度计descale 除污，除氧化皮等ferrite 铁素体austenite 奥氏体martensite马氏体cementite 渗碳体iron carbide 渗碳体solid solution 固溶体sorbite 索氏体bainite 贝氏体pearlite 珠光体nodular fine pearlite/ troostite屈氏体black oxide coating 发黑grain 晶粒chromium 铬cadmium 镉tungsten 钨molybdenum 钼manganese 锰vanadium 钒molybdenum 钼silicon 硅sulfer/sulphur 硫phosphor/ phosphorus 磷nitrided 氮化的case hardening 表面硬化，表面淬硬air cooling 空冷furnace cooling 炉冷oil cooling 油冷electrocladding /plating 电镀brittleness 脆性strength 强度rigidity 刚性,刚度creep 蠕变deflection 挠度elongation 延伸率yield strength 屈服强度elastoplasticity 弹塑性metallographic structure 金相组织metallographic test 金相试验carbon content 含碳量induction hardening 感应淬火impedance matching 感应淬火hardening and tempering 调质crack 裂纹shrinkage 缩孔，疏松forging 锻（件）casting 铸（件）rolling 轧（件）drawing 拉（件）shot blasting 喷丸（处理）grit blasting 喷钢砂（处理）sand blasting 喷砂（处理）carburizing 渗碳nitriding 渗氮ageing/aging 时效grain size 晶粒度pore 气孔sonim 夹砂cinder inclusion 夹渣lattice晶格abrasion/abrasive/rub/wear/wearing resistance (property) 耐磨性spectrum analysis光谱分析heat/thermal treatment 热处理inclusion 夹杂物segregation 偏析picking 酸洗，酸浸residual stress 残余应力remaining stress 残余应力relaxation of residual stress 消除残余应力stress relief 应力释放。

量具检具英文对照

量具检具英文对照51 调准gauging52 调整adjustment量"具"类1.量块gauge block2.光滑极限量规plain limit gauge3.塞规plug gauge4.环规ring gauge卡规snap gauge5.塞尺feeler gauge6.钢直尺steel gauge7.精密玻璃线纹尺precision glass linear scale8.精密金属线纹尺precision metal linear scale9.半径样板radius template卡尺类1.游标卡尺vernier caliper2.带表卡尺dial caliper3.电子数显卡尺calliper with electronic digital display4.深度标游卡尺depth vernier caliper5.电子数显深度卡尺depth caliper with electronic digital display6.带表高度卡尺dial height calliper7.高度游标卡尺height vernier caliper8.电子数显高度卡尺height caliper with electronic digital display9.焊接检验尺calliper for welding inspection千分尺类1.测微头micrometer head2.外径千分尺external micrometer3.杠杆千分尺micrometer with dial comparator4.带计数器千分尺micrometer with counter5.电子数显外径千分尺micrometer with electronic digital display6.小测头千分尺small anvil micrometer7.尖头千分尺point micrometer8.板厚千分尺sheet metal micrometer9.壁厚千分尺tube micrometer10.叶片千分尺blade micrometer11.奇数沟千分尺odd fluted micrometer12.深度千分尺depth micrometer13.内径千分尺internal micrometer14.单杆式内径千分尺single-body internal micrometer15.表式内径千分尺dail internal micrometer16.三爪式内径千分尺three point internal micrometer17.电子数显三爪式内径千分尺three point internal micrometer18.内测千分尺inside micrometer指示表类1.指示表dial indicator2.深度指示表depth dial indicator3.杠杆指示表dial test indicator4.内径指示表bore dial indicator5.涨弹簧式指示表expanding head bore dial indicator6.钢球式内径指示表ball type bore dial indicator7.电子数显指示表dial indicator with electronic digital display8.杠杆卡规indicating snap gauge9.带表卡规dial snap gauge10.带表外卡规outside dial snap gauge11.带表内卡规inside dial snap gauge12.测厚规thickness gauge13.扭簧比较仪microcator14.杠杆齿轮比较仪mechanical dial comparator15.电子量规electronic gauge16.电感式传感器inductance type transducer17.指示装置indicating device18.电感测微仪inductance micrometer19.峰值电感测微仪peak inductance micrometer20.电感内径比较仪inductance bore comparator21.瞄准传感器aiming transducer角度测量器具1.角度块angle block gauge2.正多面棱体regular polygon mirror3.刀具角度样板cutter angular template4.直角尺square5.平行直角尺parallel square6.宽座直角尺wide-stand square7.刀口形直角尺edge square8.矩形直角尺square square9.三角形直角尺three angle square10.圆柱直角尺cylinder square11.方形角尺square guage12.万能角度尺universal bevel protractor13.游标式万能角度尺vernier universal bevel protractor14.表式万能角度尺dial universal bevel protractor15.光学分度头optical dividing head16.目镜式光学分度头optical dividing head with microscope reading17.投影式光学分度尺optical dividing head with projection reading18.光电分度头optical-electronic dividing head19.多齿分度台multi-tooth division table20.分度转台division rotary table21.正炫规sine bar22.普通正炫规general sine bar23.铰链式正炫规hinge type sine bar24.双向正炫规dual-directional sine bar25.圆锥量规cone gauge26.圆锥塞规plug cone gauge27.圆锥环规ring cone gauge28.直角尺测量仪square measuring instrument形位误差测量器具1.平晶optical flat2.单面平晶optical flat3.双面平晶parallel optical flat4.刀口形直尺knife straight edge5.刀口尺knife straight edge6.三棱尺three edges straight edge7.四棱尺four edges straight edge8.平尺straight edge9.矩形平尺square straight edge10.工字形平尺i-beam straight edge11.角形平尺angle straight edge12.桥形平尺bridge type straight edge13.平板surface plate14.铸铁平板cast iron surface plate15.岩石平板granite surface plate16.方箱square box17.水准器式水平仪level meter18.条式水平仪bar level meter19.框式水平仪frame level meter20.合像水平仪imaging level meter21.光学倾斜仪optical inclinometer22.电子水平仪electronic level meter23.指针式电子水平仪electronic level meter with indicator24.数显式电子水平仪electronic level meter with digital display25.平直度测量仪straightness measuring instrument26.光学式平直度测量仪optical straightness measuring instrument27.光电式平直度测量仪photoelectrical straightness measuring instrument28.圆度测量仪roundness measuring instrument29.转轴式圆度测量仪spindle-rotating type roundness measuring instrument30.转台式圆度测量仪table-rotating type roundness measuring instrument表面质量测量器具表面粗糙度比较样块surface roughness comparison specimen铸造表面粗糙度比较样块surface roughness comparison specimen for cast surface磨、车、镗、铣、插及刨加工表面粗糙度比较样块surface roughness comparison specimen for ground,turned,bored,milled,shaped and planed surface电火花加工表面粗糙度比较样块surface roughness comparison specimen for spark-erosion machined surface抛（喷）丸、喷砂加工表面粗糙度比较样块surface roughness comparison specimen for shot blasted and grit blasted surface抛光加工表面粗糙度测量仪portable surface roughness comparison specimen for polished surface便携式表面粗糙度测量仪portable surface roughess measuring instrument驱动箱driving box台式表面粗糙度测量仪bench type surface roughness measuring instrumentNose bridge 鼻中Tip 脚套Temple 脚丝Plating 电镀Printing 印字Lase 镭射Spectacle frames 眼镜架Sunglasses 太阳眼镜Sports spectacles 运动眼镜kid's eyewear 儿童眼镜Reading glasses 老花镜Contact lens 隐形眼镜Glass optical lenses 玻璃镜片Plastic optical lenses 塑胶镜片Sunglasses lenses, sun clips 太阳镜片、镜夹Progressive lenses 渐进多焦点镜片Photochromic lenses 变色镜片Othro k lenses 角膜矫形接确镜片Optical blanks 镜片毛胚Accessories for contact lens 隐形眼镜附件Spectacle spare parts and accessories 眼镜零件及配件Components of frames 镜架组件Spectacle cases & accessories 眼镜盒及附件Eyecare products and solution for lenses and contace lenses 眼睛护理产品及隐形眼镜洁液Spectacle cases & accessories 眼镜盒及其它配件Lens demisting cloths and solutions 镜片除雾喷剂及清洁布Spectacle assembling & adjusting tools 眼镜加工、装配、调较工具Visual test equipment 验眼设备Edger 磨边机Eyeglasses and frame making machinery 眼镜架制造机械Lens manufacturing and processing machinery 镜片造机械及加工机械Contact lens processing machinery 隐形眼镜加工机械Lathe 车床Coating machine 镀膜机Coating materials 镀膜原料Electroplating equipment, welding machine 电镀机械、焊接机械Price labeling, stamp printing and screen printing mahcinery 标签机、移印机、丝网印刷Ultrasonic cleaning equipment 超声波清洁仪器Ophthalmic products 眼科用品Concentrates for ultrasonic cleaning 超声波清洁剂Lens grinding and polishing filtration systems 镜片研磨及抛光过滤系统Optical processing equipmentand materials 光学加工设备及原料Measurement instrucments for optical elements and systems 光学用品及系统之测量仪器Store and workshop fitting and furniture 眼镜店及工场设备及家具Moulds for ophthalmic lenses 镜片模具Raw materials for frames 眼镜原料Raw materials for lenses 镜片原料Lens abrasive and polishing materials 打磨镜片原料Electroplating, welding materials 电镀、焊接原材料Opto-laser equipment and instruments 激光科技设备和仪器机械英语单词冲床punching machine机械手robot油压机hydraulic machine车床lathe刨床planer |'plein?|铣床miller磨床grinder（钻床）driller线切割linear cutting金属切削metal cutting机床machine tool金属工艺学technology of metals刀具cutter摩擦friction联结link传动drive/transmission轴shaft弹性elasticity频率特性frequency characteristic误差error响应response定位allocation机床夹具jig动力学dynamic运动学kinematic静力学static分析力学analyse mechanics拉伸pulling压缩hitting剪切shear扭转twist弯曲应力bending stress强度intensity三相交流电three-phase AC磁路magnetic circles 变压器transformer异步电动机asynchronous motor几何形状geometrical精度precision正弦形的sinusoid交流电路AC circuit机械加工余量machining allowance变形力deforming force变形deformation应力stress硬度rigidity热处理heat treatment退火anneal正火normalizing脱碳decarburization渗碳carburization电路circuit半导体元件semiconductor element反馈feedback发生器generator直流电源DC electrical source门电路gate circuit逻辑代数logic algebra外圆磨削external grinding内圆磨削internal grinding平面磨削plane grinding变速箱gearbox离合器clutch绞孔fraising绞刀reamer螺纹加工thread processing螺钉screw铣削mill铣刀milling cutter功率power工件workpiece齿轮加工gear mechining齿轮gear主运动main movement主运动方向direction of main movement进给方向direction of feed进给运动feed movement合成进给运动resultant movement of feed合成切削运动resultant movement of cutting合成切削运动方向direction of resultant movement of cutting 切削深度cutting depth前刀面rake face刀尖nose of tool前角rake angle后角clearance angle龙门刨削planing主轴spindle主轴箱headstock卡盘chuck加工中心machining center车刀lathe tool车床lathe钻削镗削bore车削turning磨床grinder基准benchmark钳工locksmith锻forge压模stamping焊weld拉床broaching machine拉孔broaching装配assembling铸造found流体动力学fluid dynamics流体力学fluid mechanics加工machining液压hydraulic pressure切线tangent机电一体化mechanotronics mechanical-electrical integration 气压air pressure pneumatic pressure稳定性stability介质medium液压驱动泵fluid clutch液压泵hydraulic pump阀门valve失效invalidation强度intensity载荷load应力stress安全系数safty factor可靠性reliability螺纹thread螺旋helix键spline销pin滚动轴承rolling bearing滑动轴承sliding bearing弹簧spring制动器arrester brake十字结联轴节crosshead联轴器coupling链chain皮带strap精加工finish machining粗加工rough machining变速箱体gearbox casing腐蚀rust氧化oxidation磨损wear耐用度durability随机信号random signal离散信号discrete signal超声传感器ultrasonic sensor集成电路integrate circuit挡板orifice plate残余应力residual stress套筒sleeve扭力torsion冷加工cold machining电动机electromotor汽缸cylinder过盈配合interference fit热加工hotwork摄像头CCD camera倒角rounding chamfer优化设计optimal design工业造型设计industrial moulding design有限元finite element滚齿hobbing插齿gear shaping伺服电机actuating motor铣床milling machine钻床drill machine镗床boring machine步进电机stepper motor丝杠screw rod导轨lead rail组件subassembly可编程序逻辑控制器Programmable Logic Controller PLC 电火花加工electric spark machining电火花线切割加工electrical discharge wire - cutting相图phase diagram热处理heat treatment固态相变solid state phase changes有色金属nonferrous metal陶瓷ceramics合成纤维synthetic fibre电化学腐蚀electrochemical corrosion车架automotive chassis悬架suspension转向器redirector变速器speed changer板料冲压sheet metal parts孔加工spot facing machining车间workshop工程技术人员engineer气动夹紧pneuma lock数学模型mathematical model画法几何descriptive geometry机械制图Mechanical drawing投影projection视图view剖视图profile chart标准件standard component零件图part drawing装配图assembly drawing尺寸标注size marking技术要求technical requirements刚度rigidity内力internal force位移displacement截面section疲劳极限fatigue limit断裂fracture塑性变形plastic distortion脆性材料brittleness material刚度准则rigidity criterion垫圈washer垫片spacer直齿圆柱齿轮straight toothed spur gear斜齿圆柱齿轮helical-spur gear直齿锥齿轮straight bevel gear运动简图kinematic sketch齿轮齿条pinion and rack蜗杆蜗轮worm and worm gear虚约束passive constraint曲柄crank摇杆racker凸轮cams范成法generation method毛坯rough游标卡尺slide caliper千分尺micrometer calipers攻丝tap光学仪器类△Topslit illumination 裂隙灯diopter 屈光度sphere 球镜cylinder 柱镜prism 棱镜magnification 放大倍率diameter 直径dimensions 尺寸light spot 光斑fixation lamp 固视灯led 发光二极管filter 滤色片lensmeter 焦度计metal rim 金属圈PD meter 瞳距仪Pupil Distance 瞳距Vertex Distance 顶点距Chart 视标View tester 验光仪Cutting device 切割刀Pattern maker 制模机Cutting needle 划针Layout blocker 中心仪Hand edger 手动磨边机Lens groover 开槽机Polisher 抛光机Polishing stick 抛光膏Drilling machine 钻孔机Bench drilling machine 台式钻孔机Drill bit 钻头Lock opener 锁开Milling cutting 铣刀Fuse 保险丝Handle 手柄Center locator 中心定位器Drill chuck 钻夹头Dial 刻度盘Frame heater（warmer）烘架机Heating coil 发热丝Ultrasonic cleaner 清洗机Combined table 验光组合台Optometry box 验光盘Grinding wheel 砂轮Trial lens set 验光镜片箱Refractometer 验光仪Chart projector 投影仪Keratometer 角膜曲率仪Welding machine 焊接机Spray cleaning machine 喷淋清洗机材料配件类△TopMonel 锰料Stainless Steel 不锈钢pure Titanium 纯钛Titanium Alloy 钛合金B-Ti B钛Elongation 伸长率Tensile strenghth 抗拉强度high nickel copper alloy 高镍合金nickelfree alloy 无镍合金nicklfree stainless steel 无镍不锈钢annealing temperture 退火温度percent 含量density 密度melting point 熔点solidus 固相点liquidus 液相点physical properties 物理性能chemical composition 化学组成hinge 铰链rim wire 框线round wire 圆线cylinding grinding wheels 筒形砂轮flaring cup wheels 碗形砂轮diamod plain wheels 平形砂轮grinding ccoolant 切削液lens coating liquid 护镜液polishing powder 抛光粉polishing liquid 抛光液polishing wheel 抛光轮plating case 电镀盒plastic case 塑料盒alumium oxide case 氧化铝盒rocket screwdrivers 六角螺丝刀mini ring wrenches/nutdrivers 微型戒指扳手radian apparatus 弧度表thickness apparatus 厚度表adhesive tape 粘片calipers 量具nut driver 套筒files set 锉刀drill bits 钻咀screwdrivers blades 螺丝刀头镜片类△Tophard resin lens 树脂镜片round-top bifocal lens 圆顶双关镜片flat-top bifocal lens 平顶双光镜片aspheric hard resin lens 非球面树脂镜片Non-coated lens 基片（NC）hard coated lens 加硬镜片（HC）Hard & Multi-coated 加硬加膜片（HMC）Hard & Multi-coated,EMI Defending Coating 加硬加膜防辐射片（HMC+EMI）RX Lens-High Index 高散光片color shade 色差deformation 变形shrinkage 缩水light transmission 透光率de-lamination 分裂脱层abbe value 阿贝数raw material 原材料catalysis 催化作用polymerization 聚合作用tinted lens 染色镜片photochromic lens 变色镜片spherical 球面的autocollimator 自动准直机bench comparator 比长仪block gauge 块规bore check 精密小测定器calibration 校准caliper gauge 卡规check gauge 校对规clearance gauge 间隙规clinoretee 测斜仪comparator 比测仪cylinder square 圆筒直尺depth gauge 测深规dial indicator 针盘指示表dial snap gauge 卡规digital micrometer 数位式测微计feeler gauge 测隙规gauge plate 量规定位板height gauge 测高规inside calipers 内卡钳inside micrometer 内分测微计interferometer 干涉仪leveling block 平台limit gauge 限规micrometer 测微计mil 千分之一寸monometer 压力计morse taper gauge 莫氏锥度量规nonius 游标卡尺optical flat 光学平晶optical parallel 光学平行passimeter 内径仪position scale 位置刻度profile projector 轮廓光学投影仪protractor 分角器radius 半径ring gauge 环规sine bar 正弦量规snap gauge 卡模square master 直角尺stylus 触针telescopic gauge 伸缩性量规working gauge 工作量规。

热处理专业术语中英文对照

热处理专业英语age hardening时效硬化ageing老化处理aw hardening气体硕化air pateiituig 空气韧化annealing 退火anode effect阳极效应anodizing 阳极氧化处理atomloy treatment 阿托木洛伊表jftj austempering奥氏体等温淬火austenite奥斯田体/奥氏体bainite贝氏体banded structure条纹状组织barrel plating 滚镀barrel tiimbling 滚简打光blackening 染黑法blue shortness 青熟脆性bondenzing磷酸盐皮膜处理box annealing箱型退火box carbmizing 封箱渗碳bnght electroplating 辉面电镀bnglit heat tieatment 光辉热处理bypass heat treatment 旁路热处理carbide炭化物carburized case depth 浸碳U更化深层carbuiizing 渗碳cementite炭化铁chemical platmg 化学电镀chemical vapor deposition 化学蒸镀coaisemng结晶粒粗人化coatmg涂布被覆cold shortness 低温脆性comemtite渗碳体controlled atmosphere 人气热处理comer effect锐角效应creeping discharge 蠕缓放电decarburization 脱碳处理decarbunzing脱碳退火depth of haidenmg 硬化決层division 扩散dififtision annealing 扩散退火electrolytic haidening 电解淬火embossing丿卡彳乞etchmg表面蚀刻gaseous cyaiuding 气体氧化法globulai* cementite 球状炭化铁grain size结晶粒度granolite tieatment磷酸溶液热处理graphitizmg 石墨退火haidenability 硬化性hardenability curve 硬化性曲线hardenmg 破化heat tieatnient 热处理hot bath quenchnig 热浴淬火hot dipping 热浸镀induction hardenmg 高周波硬化ion carbomti'iding离子渗碳氮化ion carburizing离子渗碳处理ion plating离子电镀isotlieniial annealing 等温退火liquid honing液体喷砂法low temperatiue annealing 低温退火malleablizing可锻化退火martempering 麻回火处理martensite马氏体/硬化铁炭metallikon金属喷镀法metallizing真空涂膜mtnding氮化处理nitrocarburizing 软氮化nomializing 正常化oil quenching 油淬化overagemg过老化overheating 过热pearlite针尖组织phosphatmg 磷酸盐皮膜处理physical vapor deposition 物理蒸镀plasma mtnding 离子氮化pre-amiealmg 预备退火precipitation 析出precipitation hardening 析出駛化press quenching 加压破化process amiealmg 制程退火quench ageing淬火老化quench haidening 淬火quenching crack 淬火裂痕quenchmg distortion 淬火变形quenchmg stress 淬火应力femte肥粒铁first stage annealing 第一段退火flame hardeiuiig 火焰硬化flame tieatment 火焰处理foil annealing完全退火straightening annealing 矫直退火strain ageing应变老化stress relieving annealing 应力消除退火subzero treatment 生冷处理supercooling 过冷surface haidening表而硕化处理temper bnttleness 回火脆性temper colour回火颜色tempeniig 回火tempemig crack 回火裂痕texture 咬花thennal refiiiuig 调质处理tliennoechanical treatment 加工热处理tune quenching 时间淬火transfonnation 变态tiifftnde process软氮化处理under annealing不完全退火vacuum carbomtndmg 真空碳氮化vaciuim carbiuizing 貞.空渗碳处理vacuum hardening 真空淬火vacuum heat tieatinent 真空热处理vacuum mtiiding 頁空氮化water quenching 水淬火wetout浸润处理1.indication 缺陷2.test specimen 试样3.bar棒材4.stock 原料5.billet方钢，钢方坯6.bloom钢坯，钢锭7.section 型材& steel ingot 钢锭9.blank坯料，半成品10.cast steel 铸钢11.nodular cast iron 球墨铸铁12.ductile cast uon 球墨铸铁13.bronze 青铜14.brass 黄铜15.copper 合金reconditionmg 再调质recrystallization 再结晶red shortness红热脆性residual stiess 残留应力retained austenite 残甜奥rust prevention 防蚀salt bath quencluiig 盐浴淬火sand blast喷砂处理seasonuig时效处理second stage annealing 第二段退火secular distortion 经年变形segregation 偏析selective hardening 部分淬火shot blast喷丸处理shot peeiihig 珠击法smgle stage nitndmg 等温渗氮smtenng烧结处理soaknig均热处理softening软化退火solution treatment 固溶化热处理spheroidizing球状化退火stabilizing tieatment 安定化处理51 molybdenum52.silicon 硅53.sulfer/sulphur 硫54.phosphor/ phosphoms 磷55.mtnded氮化的56 case hardenmg表面破j化，表面淬被57. air cooling 空冷5 & fiunace cooling 炉冷59. oil coolmg 油冷60 electrocladdmg /plating 电镀61.bnttleness 脆性62.stiength 强度63.ngidity刚性，刚度64.creep 蠕变65.deflection 挠度66.elongation 延伸率67.yield strength 屈服强度68.elastoplasticity 弹塑性69.metallographic structxue 金相组织70.metallographic test 金相试验71 caibon content 含碳量72. mcuction hardening 感应淬火16 stainless steel 不锈钢17.decarbuiization 脱碳18.scale氧化皮19.anneal 退火20 process anneal 进行退火21.quenclmig 淬火22.nonualizing 正火23.Charpy impact text 夏比冲击试验24.fatigue 疲劳25.tensile testing 拉伸试验26 solution固溶处理27. aging时效处理2& Vickers hardness 维氏硬度29.Rockwell liaidness 洛氏破度30.Brinell hardness 布氏硬度31.hardness tester 破度计32.descale除污，除氧化皮等33.femte铁素体34.austenite 奥氏体35.martensite 马氏体36.cementite 渗碳体37.iron carbide 渗碳体38.solid solution 固溶体39.sorbite 索氏体40.bainite 贝氏体41.pearlite 珠光体42.nodular fine pearlite/ troostite 屈氏体43.black oxide coating 发黑44.grain 晶粒45.chiomium 俗46 cadmium 镉47. tungsten 鸽4& molybdenum 钳73.unpedance matchmg 感应淬火74.hardening and teinpeiing 调质75.crack 裂纹76 sluuikage缩孔，疏松77.forging 锻（件）78.casting 铸（件）79.rolling 轧（件）80 drawing 拉（件）81.shot blasting 喷丸（处理）82.gilt blasting 喷钢砂（处理）83.sandblasting 喷砂（处理）84.caibiuizing 渗碳85.mtnding 渗氮86.ageing/agmg 时效87.grain size 晶粒度8& pore气孔89.somm 夹砂90.cinder inclusion 夹渣ttice 晶格92.abrasion/abrasive/rub/wear/weanng resistance （property）耐磨性93.spectrum analysis 光谱分析94.heaVthennal treatment 热处理95.inclusion 夹杂物96.segiegation 偏析97.picking酸洗，酸浸9& residual stiess 残余应力99 reinammg stress 残余应力100.relaxation of residual stress 消除残余应力101.stress relief 应力释放。

热处理英语词汇(注音版最好用)

Heat treatment of English vocabulary热处理英语词汇A奥氏体 austenite 奥氏体化 austenitization奥氏体回火,等温淬火 austemperingB板条似的 lathy (adj) 白口铸铁 white cast iron白亮层 white layer,nitride layer 贝氏体 bainite表面粗糙度 surface finish 表面强化 hard facing 不锈钢 stainless steel不完全退火 intercritical annealing 布氏硬度试验 Brinell testC残余奥氏体 retained austensite 残余应力 residual stress淬火 quenching (n),quench (vt) 淬透性 hardenability淬硬性 hardening capacity 齿轮，传动装置 gearD氮气 nitrogen氮碳共渗,软氮化 nitrocarburizing 等温线 isotherm等温淬火, 奥氏体回火 austempering 低碳钢 low carbon steel 锻造 forging （n ）E二次渗碳体 secondary cementite 二氧化碳 carbon dioxideF腐蚀 etch腐蚀状态,侵蚀 corrosion （n ）奥氏体 austenite [英]['ɔ:st ə,nait] [美]['ɔst ə,na ɪt] 板条状马氏体 lathy martensite [英]['kæθi] [美]['kæθɪ][英]['m ɑ:tən,zait] [美]['m ɑrtən,za ɪt]贝氏体 bainite ['beinait] 二次渗碳体 secondary cementite [英][si'mentait] [美][s ɪ'm ɛn,ta ɪt] 回火马氏体tempered martensite [英]['m ɑ:tən,zait] [美]['m ɑrtən,za ɪt] 莱氏体 ledeburite ['leid əbu:rait] 粒状珠光体 globular pearlite [英]['ɡl ɔbjələ(r)] [美]['gl ɑbj əl ɚ] [英]['p ə:lait] [美]['p ɚ,la ɪt] 马氏体 martensite [英]['m ɑ:tən,zait] [美]['m ɑrtən,za ɪt] 屈氏体(托氏体) troostite [英]['tru:stait] [美]['tru,sta ɪt]上贝氏体 upper bainite ['beinait] 渗碳体 cementite [英][si'mentait] [美][s ɪ'm ɛn,ta ɪt] 铁素体 ferrite [英]['ferait] [美]['f ɛra ɪt] 魏氏体 widemanstatten 下贝氏体 low bainite 珠光体 pearlite 针状马氏体 acicular martensite显微结构 microstructure [英]['maikr əu,str ʌkt ʃə] [美]['ma ɪkro,str ʌkt ʃɚ]不锈钢 stainless steel [英]['steinlis] [美]['stenl ɪs] 低碳钢 low carbon steel [英]['k ɑ:bən] [美]['k ɑrbən] 非合金钢(普通碳素钢) plain-carbon steel 沸腾钢 rimming steel ['rimiŋ]高锰钢 high manganese steel [英]['mæŋɡəni:z] [美]['mæŋgə'niz] 高速钢 high-speed steel 高碳钢 high carbon steel 工具钢 tool steel共析钢 eutectoid steel [英][ju:'tekt ɔid] [美][ju't ɛkt ɔɪd]过共析钢 hypereutectoid steel [,haip ərju'tekt ɔid] 合金钢 alloy steel [英]['æl ɔi] [美]['æl,ɔɪ]冷轧钢，软钢 mild steel [英][ma ɪld] [美][ma ɪld] 马氏体时效钢,特高强度钢 maraging steel[英]['m ɑ:reid ʒiŋ] [美]['m ɑred ʒɪŋ] 热强钢 heat-resistant steel[英][r ɪ'z ɪst ənt] [美][r ɪ'z ɪst ənt]亚共析钢 hypoeutectoid steel [,haip əuju(:)'tekt ɔid] 中碳钢 medium carbon steel [英]['mi:di əm] [美]['mid ɪəm] 自硬钢 self-hardening steel [英]['h ɑ:dəniŋ] [美]['h ɑrdn ɪŋ]钢 steel[英][sti:l] [美][stil]G高速钢high-speed steel高碳钢high carbon steel感应淬火induction hardening工具钢tool steel共晶的(n) 共晶(体)的(adj) eutectic共晶转变(共晶反应) eutectic reaction共析(的) eutectoid n&adj固溶强化solid solution strengthening固溶热处理solution heat treatment光亮淬火(退火) bright quenching (annealing)过冷undercool过冷(现象) supercooling过共晶的hypereutectic (adj)过共析的hypereutectoid过共析钢hypereutectoid steel过热overheat H焊接区晶间腐蚀welddecay合金钢alloy steel合金元素alloy element化学气体沉积,CVD chemical vapor deposition 回火temper, tempering回火马氏体tempered martensite灰铸铁gray ironJ加工硬化work-hardened金相试样metallographic specimen晶界grain boundary晶粒grain晶粒度grain size晶粒细化处理structural grain refining K抗拉强度tensile strength抗压强度compressive strength 可锻铸铁malleable ironL莱氏体ledeburite冷轧钢，软钢mild steel冷硬铸铁chilled iron粒状渗碳体globular scementite 炉子furnace洛氏硬度计Rockwell apparatus 洛氏硬度试验Rockwell test M马氏体martensite马氏体时效钢,特高强度钢maraging steel 弥散强化dispersion strengtheningN耐磨铸铁wear resisting cast iron 耐热铸铁heat resisting cast iron 耐酸铸铁acid resisting cast iron 努氏硬度试验Knoop test Q侵蚀, 腐蚀状态corrosion n青铜bronze,gunmetal球状的,球体的spheroidal球墨铸铁spheroidal graphite cast iron, ductile iron球化(处理) spheroidize v球化退火spheroidize annealing球化作用spheroidization球化不良under-nodularizing球化衰退degradated spheroidisation去除应力stress relieving去内应力退火stress-relief annealR热强钢heat-resistant steel 人工时效artificial aging蠕墨铸铁vermicular graphite iron,compacted graphite cast iron 软钢mild steel,soft steel软氮化, 氮碳共渗nitrocarburizing castS渗氮nitriding渗碳carburize, carburizing, carburization渗碳层深度carburized (case) depth渗碳体cementite石墨graphite石墨化graphitization石墨化退火graphitizing annealing时效硬化age hardening试样specimen水韧处理water tougheningT炭黑soot碳氮共渗carbonitriding碳当量carbon equivalent碳钢carbon steel碳化物形成元素carbide-forming element 铁iron铁的，含铁的ferrous （adj）不含铁的nonferrous铁素体ferrite铁素体化退火ferritizing annealing退火anneal脱碳decarbonization,decarburization, decarburisation, decarburation脱碳层decarburizing layer脱碳倾向decarburizing tendency脱碳深度, 脱碳层厚度decarburized depth 脱碳退火decarburizing annealing调质处理thermal refining W完全退火full annealing网状碳化物network carbide微观组分microconstituent微观结构(组织), 显微组织microstructure, micromechanism维氏硬度计Vickers hardness tester魏氏体widemanstatten物理气体沉积,PVD physical vapor deposition无相变退火subcritical annealingX镶嵌mount (v)相图phase diagram显微组织,微观组织(结构) microstructure 显微硬度试验microhardness testing Y亚共晶的hypoeutectic (adj)亚共析的hypoeutectoid （adj）亚稳定相(亚稳定状态) metastable phase 研磨grind (v)氧化oxidation,oxygenation氧化皮scale冶金，冶金术metallurgy冶金学的metallurgicmetallurgical冶金学者metallurgist冶炼smelt应力去除stress relieving有效渗碳硬化层深度effective case depth 预氧化preoxidation孕育铸铁inoculated cast iron轴承bearing, axletree铸造，铸件cast针状的acicular (adj)正火normalizing自然时效natural aging自硬钢self-hardening steelZ再结晶退火recrystallization annealing中碳钢medium carbon steel轴axes，axis，axletree，shaft，spindle。

热处理术语的英文翻译

热处理术语的英文翻译indication 缺陷test specimen 试样bar 棒材stock 原料billet 方钢，钢方坯bloom 钢坯,钢锭section 型材steel ingot 钢锭blank 坯料，半成品cast steel 铸钢nodular cast iron 球墨铸铁ductile cast iron 球墨铸铁bronze 青铜brass 黄铜copper 合金stainless steel不锈钢decarburization 脱碳scale 氧化皮anneal 退火process anneal 进行退火quenching 淬火normalizing 正火Charpy impact text 夏比冲击试验fatigue 疲劳tensile testing 拉伸试验solution 固溶处理aging 时效处理Vickers hardness维氏硬度Rockwell hardness 洛氏硬度Brinell hardness 布氏硬度hardness tester硬度计descale 除污，除氧化皮等ferrite 铁素体austenite 奥氏体martensite马氏体cementite 渗碳体iron carbide 渗碳体solid solution 固溶体sorbite 索氏体bainite 贝氏体pearlite 珠光体nodular fine pearlite/ troostite屈氏体black oxide coating 发黑grain 晶粒chromium 铬cadmium 镉tungsten 钨molybdenum 钼manganese 锰vanadium 钒molybdenum 钼silicon 硅sulfer/sulphur 硫phosphor/ phosphorus 磷nitrided 氮化的case hardening 表面硬化，表面淬硬air cooling 空冷furnace cooling 炉冷oil cooling 油冷electrocladding /plating 电镀brittleness 脆性strength 强度rigidity 刚性,刚度creep 蠕变deflection 挠度elongation 延伸率yield strength 屈服强度elastoplasticity 弹塑性metallographic structure 金相组织metallographic test 金相试验carbon content 含碳量induction hardening 感应淬火impedance matching 感应淬火hardening and tempering 调质crack 裂纹shrinkage 缩孔，疏松forging 锻（件）casting 铸（件）rolling 轧（件）drawing 拉（件）shot blasting 喷丸（处理）grit blasting 喷钢砂（处理）sand blasting 喷砂（处理）carburizing 渗碳nitriding 渗氮ageing/aging 时效grain size 晶粒度pore 气孔sonim 夹砂cinder inclusion 夹渣lattice晶格abrasion/abrasive/rub/wear/wearing resistance (property) 耐磨性spectrum analysis光谱分析heat/thermal treatment 热处理inclusion 夹杂物segregation 偏析picking 酸洗，酸浸residual stress 残余应力remaining stress 残余应力relaxation of residual stress 消除残余应力stress relief 应力释放。

量具检具英文对照

11.带表内卡规inside dial snap gauge
12.测厚规thickness gauge
13.扭簧比较仪microcator
14.杠杆齿轮比较仪mechanical dial comparator
15.电子量规electronic gauge
16.电感式传感器inductance type transducer
电火花加工表面粗糙度比较样块surface roughness comparison specimen for spark-erosion machined surface
抛（喷）丸、喷砂加工表面粗糙度比较样块surface roughness comparison specimen for shot blasted and grit blasted surface
台式表面粗糙度测量仪bench type surface roughness measuring instrument
Nose bridge 鼻中 Tip 脚套
Temple 脚丝 Plating 电镀
Printing 印字 Lase 镭射
Spectacle frames 眼镜架 Sunglasses 太阳眼镜
24.双向正炫规dual-directional sine bar
25.圆锥量规cone gauge
26.圆锥塞规plug cone gauge
27.圆锥环规ring cone gauge
28.直角尺测量仪square measuring instrument
形位误差测量器具
1.平晶optical flat
10.叶片千分尺blade micrometer

热处理常用词汇中英文对照

热处理常用词汇中英文对照热处理常用词汇中英文对照 indication 缺陷 test specimen 试样bar 棒材stock 原料billet 方钢，钢方坯bloom 钢坯,钢锭section 型材steel ingot 钢锭blank 坯料，半成品cast steel 铸钢nodular cast iron 球墨铸铁ductile cast iron 球墨铸铁bronze 青铜brass 黄铜copper 合金stainless steel不锈钢decarburization 脱碳scale 氧化皮anneal 退火process anneal 进行退火quenching 淬火normalizing 正火Charpy impact text 夏比冲击试验fatigue 疲劳tensile testing 拉伸试验solution 固溶处理aging 时效处理Vickers hardness维氏硬度Rockwell hardness 洛氏硬度Brinell hardness 布氏硬度hardness tester硬度计descale 除污，除氧化皮等ferrite 铁素体austenite 奥氏体martensite马氏体cementite 渗碳体iron carbide 渗碳体solid solution 固溶体sorbite 索氏体bainite 贝氏体pearlite 珠光体nodular fine pearlite/ troostite屈氏体 black oxide coating 发黑grain 晶粒chromium 铬cadmium 镉tungsten 钨molybdenum 钼manganese 锰vanadium 钒molybdenum 钼silicon 硅sulfer/sulphur 硫phosphor/ phosphorus 磷nitrided 氮化的case hardening 表面硬化，表面淬硬 air cooling 空冷furnace cooling 炉冷oil cooling 油冷electrocladding /plating 电镀brittleness 脆性strength 强度rigidity 刚性,刚度creep 蠕变deflection 挠度elongation 延伸率yield strength 屈服强度elastoplasticity 弹塑性metallographic structure 金相组织 metallographic test 金相试验carbon content 含碳量induction hardening 感应淬火impedance matching 感应淬火hardening and tempering 调质crack 裂纹shrinkage 缩孔，疏松forging 锻（件）casting 铸（件）rolling 轧（件）drawing 拉（件）shot blasting 喷丸（处理）grit blasting 喷钢砂（处理）sand blasting 喷砂（处理）carburizing 渗碳nitriding 渗氮ageing/aging 时效grain size 晶粒度pore 气孔sonim 夹砂cinder inclusion 夹渣lattice晶格abrasion/abrasive/rub/wear/wearing resistance (property) 耐磨性 spectrum analysis光谱分析heat/thermal treatment 热处理inclusion 夹杂物segregation 偏析picking 酸洗，酸浸residual stress 残余应力remaining stress 残余应力relaxation of residual stress 消除残余应力stress relief 应力释放。

机械类常用英语：表面处理、热处理

cementite 炭化铁 chemical plating 化学电镀 chemical vapor deposition 化学蒸镀 coarsening 结晶粒粗大化 coating 涂布被覆 cold shortness 低温脆性 comemtite 渗碳体 controlled atmosphere 大气热处理 corner effect 锐角效应 creeping discharge 蠕缓放电 decarburization 脱碳处理 decarburizing 脱碳退火 depth of hardening 硬化深层 diffusion 扩散 diffusion annealing 扩散退火 electrolytic hardening 电解淬火 embossing 压花 etching 表面蚀刻 ferrite 铁晶体 first stage annealing 第一段退火 flame hardening 火焰硬化 flame treatment 火焰处理 full annealing 完全退火 gaseous cyaniding 气体氧化法 globular cementite 球状炭化铁 grain size 结晶粒度 granolite treatment 磷酸溶液热处理 graphitizing 石墨退火 hardenability 硬化性
precipi ta tion ha rdening 析出硬化 press quenching 加压硬化 process annealing 制程退火 quench ageing 淬火老化 quench ha rdening 淬火 quenching cra ck 淬火裂痕 quenching distortion 淬火变形 quenching stress 淬火应力 recondi tioning 再调质 recrys tallization 再结晶 red shortness 红热脆性 residual s tress 残留应力 retained austeni te 残留奥 rus t prevention 防蚀 salt ba th quenching 盐浴淬火 sand blast 喷砂处理 seasoning 时效处理 second s tage annealing 第二段退火 secula r distorti on 经年变形 segregation 偏析 selecti ve hardening 部分淬火 shot blast 喷丸处理 shot peening 珠击法 single sta ge nitri ding 等温渗氮 sintering 烧结处理 soaking 均热处理 softening 软化退火 solution trea tment 固溶化热处理 spheroidizing 球状化退火

热处理专业术语中英文对照

bright electroplating辉面电镀
bright heat treatment光辉热处理
bypass heat treatment旁路热处理
carbide炭化物
carburized case depth浸碳硬化深层
carburizing渗碳
cementite炭化铁
chemical plating化学电镀
72. induction hardening感应淬火
73。impedance matching感应淬火
74。hardening and tempering调质
75. crack裂纹
76. shrinkage缩孔，疏松
77. forging锻（件）
78。casting铸(件）
79. rolling轧（件)
vacuum hardening真空淬火
vacuum heat treatment真空热处理
vacuum nitriding真空氮化
water quenching水淬火
wetout浸润处理
1。indication缺陷
2. test specimen试样
3. bar棒材
4。stock原料
5. billet方钢，钢方坯
chemical vapor deposition化学蒸镀
coarsening结晶粒粗大化
coating涂布被覆
cold shortness低温脆性
comemtite渗碳体
controlled atmosphere大气热处理
corner effect锐角效应
creeping discharge蠕缓放电
80。drawing拉(件）
81. shot blasting喷丸（处理）

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

量具、热处理英文词汇长度测量器具量具类1. 量块gauge block2. 光滑极限量规plain limit gauge3. 塞规plug gauge4. 环规ring gauge卡规snap gauge 5. 塞尺feeler gauge 6. 钢直尺steel gauge7. 精密玻璃线纹尺precision glass linear scale 8. 精密金属线纹尺precision metal linear scale 9. 半径样板radius template卡尺类1. 游标卡尺vernier caliper2. 带表卡尺dial caliper3. 电子数显卡尺calliper with electronic digital display4. 深度标游卡尺depth vernier caliper5. 电子数显深度卡尺depth caliper with electronic digital display6. 带表高度卡尺dial height caliper7. 高度游标卡尺height vernier caliper8. 电子数显高度卡尺height caliper with electronic digital display千分尺类1. 测微头micrometer head2. 外径千分尺external micrometer3. 杠杆千分尺micrometer with dial comparator4. 带计数器千分尺micrometer with counter5. 电子数显外径千分尺micrometer with electronic digital display6. 小测头千分尺small anvil micrometer7. 尖头千分尺point micrometer8. 板厚千分尺sheet metal micrometer9. 壁厚千分尺tube micrometer 10. 叶片千分尺blade micrometer11. 奇数沟千分尺odd fluted micrometer 12. 深度千分尺depth micrometer13. 内径千分尺internal micrometer 14. 单杆式内径千分尺single-body internal micrometer15. 表式内径千分尺dail internal micrometer 16. 三爪式内径千分尺three point internal micrometer 17. 电子数显三爪式内径千分尺three point internal micrometer18. 内测千分尺inside micrometer指示表类1. 指示表dial indicator2. 深度只是表depth dial indicator3. 杠杆指示表dial test indicator4. 内径指示表bore dial indicator5. 涨弹簧式指示表expanding head bore dial indicator6. 钢球式内径指示表ball type bore dial indicator7. 电子数显指示表dial indicator with electronic digital display8. 杠杆卡规indicating snap gauge9. 带表卡规dial snap gauge 10. 带表外卡规outside dial snap gauge 11. 带表内卡规inside dial snap gauge 12. 测厚规thickness gauge 13. 扭簧比较仪microcator 14. 杠杆齿轮比较仪mechanical dial comparator 15. 电子量规electronic gauge16. 电感式传感器inductance type transducer 17. 指示装置indicating device 18. 电感测微仪inductance micrometer 19. 峰值电感测微仪peak inductance micrometer 20. 电感内径比较仪inductance bore comparator21. 瞄准传感器aiming transducer65万能测齿仪universal gear measuring instrument66万能渐开线检查仪universal involute measuring instrument67齿轮齿距测量仪gear circular pictch measuring instrument68万能齿轮测量机Universal gear measuring machine69齿轮螺旋线测量仪gear helix measuring instrument70便携式齿轮齿距测量仪manual gear circular pitch measuring instrument71便携式齿轮基节测量仪manual gear base pitch measuring instrument72立式滚刀测量仪vertical hob measuring instrument73齿轮双面啮合综合测量仪Gear dual-flank measuring instrument74齿轮单面啮合整体误差测量仪Gear single-flank meshing integrated error measuring instrument101个热处理常用英文词汇1. indication 缺陷2. test specimen 试样3. bar 棒材4. stock 原料5. billet 方钢，钢方坯6. bloom 钢坯,钢锭7. section 型材8. steel ingot 钢锭9. blank 坯料，半成品10. cast steel 铸钢11. nodular cast iron 球墨铸铁12. ductile cast iron 球墨铸铁13. bronze 青铜14. brass 黄铜15. copper 合金16. stainless steel不锈钢17. decarburization 脱碳18. scale 氧化皮19. anneal 退火20. process anneal 进行退火21. quenching 淬火22. normalizing 正火23. Charpy impact text 夏比冲击试验24. fatigue 疲劳25. tensile testing 拉伸试验26. solution 固溶处理27. aging 时效处理28. Vickers hardness维氏硬度29. Rockwell hardness 洛氏硬度30. Brinell hardness 布氏硬度31. hardness tester硬度计32. descale 除污，除氧化皮等33. ferrite 铁素体34. austenite 奥氏体35. martensite马氏体36. cementite 渗碳体37. iron carbide 渗碳体38. solid solution 固溶体39. sorbite 索氏体40. bainite 贝氏体41. pearlite 珠光体42. nodular fine pearlite/ troostite屈氏体43. black oxide coating 发黑44. grain 晶粒45. chromium 铬46. cadmium 镉47. tungsten 钨48. molybdenum 钼49. manganese 锰50. vanadium 钒51. molybdenum 钼52. silicon 硅53. sulfer/sulphur 硫54. phosphor/ phosphorus 磷55. nitrided 氮化的56. case hardening 表面硬化，表面淬硬57. air cooling 空冷58. furnace cooling 炉冷59. oil cooling 油冷60. electrocladding /plating 电镀61. brittleness 脆性62. strength 强度63. rigidity 刚性,刚度64. creep 蠕变65. deflection 挠度66. elongation 延伸率67. yield strength 屈服强度68. elastoplasticity 弹塑性69. metallographic structure 金相组织70. metallographic test 金相试验71. carbon content 含碳量72. induction hardening 感应淬火73. impedance matching 感应淬火74. hardening and tempering 调质75. crack 裂纹76. shrinkage 缩孔，疏松77. forging 锻（件）78. casting 铸（件）79. rolling 轧（件）80. drawing 拉（件）81. shot blasting 喷丸（处理）82. grit blasting 喷钢砂（处理）83. sand blasting 喷砂（处理）84. carburizing 渗碳85. nitriding 渗氮86. ageing/aging 时效87. grain size 晶粒度88. pore 气孔89. sonim 夹砂90. cinder inclusion 夹渣91. lattice晶格92. abrasion/abrasive/rub/wear/wearing resistance (property) 耐磨性93. spectrum analysis光谱分析94. heat/thermal treatment 热处理95. inclusion 夹杂物96. segregation 偏析97. picking 酸洗，酸浸98. residual stress 残余应力99. remaining stress 残余应力100. relaxation of residual stress 消除残余应力101. stress relief 应力释放一般工程词汇长度length 宽度width 高度height 深度depth 距离distance 间隙clearance 位移displacement 面积area 体积volume重量weight 质量mass 比重specific gravity 密度density 时间time 周期period 加速度velocity, speed重力加速度acceleration of gravity 力force 合力resultant 分力component 力矩moment 转矩torque, twisting moment 弯矩bending moment 压强pressure 大气压atmospheric pressure 声压级(SPL) Sound Pressure Level 应力stress 应变strain 变形deformation 拉伸stretching 压缩compressing 弯曲bending 扭转twisting 强度strength 刚度stiffness 硬度hardness 黏度viscosity 运动黏度kinematic viscosity 能量energy 动能kinetic energy 位能potential energy 功work 功率power 温度temperature 热heat 热容量thermal capacity 比热specific heat 热功当量Joule’s equivalent 传热系数coefficient of heat transfer 加热heating 冷却cooling 膨胀expansion 固体solid 液体liquid 气体gas 蒸发evaporation 溶解dissolve 融化melt 凝结condensation 凝固solidification 电路electric circuit 串联serial connection 并联parallel connection 电荷electric charge 电压voltage 电位potential 电流current 直流(D.C.) Direct Current 交流(A.C.) Alternative Current 电阻resistance 电容量capacity电容器condenser 电感inductance 电极electrode 正极anode 负极cathode 电离ionization 电解electrolysis 电镀electroplating 电泳electrophoresis 磁场强度magnetic field intensity 磁通量magnetic flux 光通量luminous flux 光照度photometric quantity 发光强度luminous intensity 工程图technical drawing 图板drawing board 图纸drawing paper描图纸tracing paper 投影projection 前视图front end view 侧视图side view 左视图left end view 右视图right end view俯视图plan view 剖面section 剖视section view 实线full line 虚线broken line, dotted line 点划线chain line 尺寸线dimension line 方形square 长方形rectangle 三角形triangle 圆形circle 内接圆inscribed circle 外切圆circumscribed circle 直尺ruler 三棱尺triangular scale 三角板set square 丁字尺tee square, T square 圆规compasses 分规divider 曲线板curve 鸭嘴笔drawing pen 锤子hammer 斧子ax, axe 螺丝刀screw driver 扳手wrench, spanner 活动扳手adjustable wrench 扳手套筒socket 钳子pliers 火钳子tongs 虎钳vice 刀子knife 刮刀scraper 剪子scissors 镊子tweezers 夹子clip 夹紧器clamp 锉刀file 凿子，錾子chisel 冲子punch 锥子awl 锯子saw 刨子plane 钻drill 砧铁anvil 直角尺square 内卡规inside calipers 外卡规outside calipers 游标卡尺vernier calipers 千分卡尺micrometer guage 高度尺height gauge 千分表dial indicator 水平（泡）尺water level 画针盘marking gauge 螺纹threads 螺栓bolt 双头螺柱stud 螺钉screw 十字槽螺钉cross recessed screw 螺母nut 开槽螺母castle nut 蝶形螺母fly nut, wing nut 垫圈washer 弹簧垫圈lock washer 开口销split pin, cotter pin 键key 花键spline 直齿齿轮spur gear 斜齿齿轮helical gear 伞齿轮bevel gear 球轴承ball bearing 滚子轴承roller bearing 滚针轴承needle roller bearing 轴承外圈outer race 轴承内圈inner race 隔离罩，保持架cage, retainer 铸造，铸件casting 锻造，锻件forging 轧制，轧制件rolling 冲压，冲压件stamping 焊接，焊缝welding 电弧焊arc welding 气焊oxyacetylene welding 点焊spot welding 铆接，铆钉rivet 机械加工machine work 切削cutting 车削turning 刨削planing 铣削milling 钻削drilling 绞孔fraising 磨削grinding 镗削boring 拉削broaching 抛光polishing 热处理heat treatment 淬火hardening, quenching 退火annealing 回火tempering 正火normalizing 车床lathe 龙门刨床planer 牛头刨床shaper 插床vertical shaper 铣床milling machine 钻床drilling machine 磨床grinder, grinding machine 外圆磨床external grinder 内圆磨床internal grinder 平面磨床surface grinder 镗床boring machine 拉床broacher 床头箱head stock (gear box) 卡盘，夹盘chuck 尾座tail stock 走刀箱tool carrier 模具die, mold 气锤pneumatic hammer 压床press 刀具cutter 车刀，刨刀bite 铣刀，绞刀fraise 钻头bite 磨轮，砂轮grinding wheel 夹具fixture, jig花键齿轮参数渐开线花键involute spline 未注公差undeclared tolerance 未注倒角undeclared chamfer 调质thermal refining 端口port chamfer模数modulus 齿形角tooth profile angle 变位系数stand-off error 齿圈径向跳动geared ring radial runout公法线长度及偏差common normal 跨齿数spanned tooth count 高频淬火high-frequency quenching 配对齿轮mating gear螺旋角spiral angle 压力角pressure angle 螺旋升角lead angle 图号figure number 齿厚tooth thickness螺旋线helix 蜗杆worm 齿轮gear 齿轴gear shaft 转子轴rotor shaft 精度等级precision class行星齿轮系planetary gear system太阳轮sun gear 行星轮planet pinion 行星架planet carrier 齿圈ring gear伞齿轮bevel gear 双曲面齿轮hypoid gear单级减速single reduction 双级减速double reduction 贯通式主减速器penetrable final drive双速主减速器double gear (speed) final drive 轮边减速器wheel reduction 差速器differential 半轴齿轮differential side gear差速锁differential lock 轴间差速器inter-axle differential lock 托森差速器torque sensitive differential。

量具、热处理英文词汇

101个热处理常用机械英文词汇

热处理英语缩写

量具检具英文对照

量具检具英文对照

热处理英语专业词汇

常用热处理术语中英对照

量具检具英文对照

热处理专业英语

量具检具英文对照

热处理专业术语中英文对照

热处理英语词汇(注音版 最好用)

热处理术语的英文翻译

量具检具 英文对照

热处理常用词汇中英文对照

机械类常用英语：表面处理、热处理

热处理专业术语中英文对照

热处理英语词汇(注音版最好用)

量具检具英文对照