BL-HUB35A-TRB佰鸿一级代理推荐资料
采购编号
呼伦贝尔市公安局PDT数字集群设备清单
四载频基站（5套）
序号
设备名称
品牌/规格型号
设备描述
数量
单位
1
信道机
海能达/CHU621
CHU 信道机
4
块
2
3分集接收软件包
海能达/
3分集接收软件包
4
套
3
基站控制单元
海能达/BSC621
BSCU 基站控制器
2
块
4
基站控制软件
海能达/
BSCU 基站控制器软件
1
台
10
四载频机柜
海能达/CAB621
四载频机柜组件(含EIB接口板、线材、结构)
1
台
11
全向高增益玻璃钢天线361-366MHz
TQJ-350C
全向高增益玻璃钢天线(含自制配件) 361-366M 增益9dBi 垂直极化 阻抗50欧姆 双节 驻波比≤1.5 N(母)形接头
1
根
12
全向高增益玻璃钢天线351-356MHz
WIN 2008 32位
1
套
二、链路设备清单
序号
设备名称
型号
设备名称
数量
单位
1
IP路由器
AR0M1510BA00
IP路由器
23
台
三、网管系统设备清单
序号
设备名称
型号
设备名称
数量
单位
1
网管终端（PC）
7020
网管终端（PC）
1
台
2
网管终端软件
/
网管终端软件
1
套
四、调度系统设备清单
阿比科.宾采尔机器人焊枪产品及周边产品介绍
阿比科.宾采尔机器人焊枪产品及周边产品介绍金属惰性气体（MIG）/金属活性气体（MAG）焊枪⏹“ABIROB A ECO-Line”：MIG/MAG气冷式焊枪系统ABIROB® A300,A360 、ABIROB® A500⏹“ABIROB 350 GC”：MIG/MAG气冷式焊枪系统ABIROB® 350 GC⏹“ROBO Standard” MIG/MAG液冷式焊枪系统ROBO 455 D 、 ROBO 650 TSABIROB W 焊枪系统（液冷式）⏹ABIROB W300、ABIROB W500钨极氩弧焊（TIG）焊枪系统⏹“ABITIG MT”ABITIG® MT 300 W机器人周边产品⏹机器人防碰撞iCAT、CAT 2、iSTM⏹清枪装置BRS-CC⏹冷却箱BWCABIROB A 系列焊枪(气冷)新颖的设计、一流的配置、简易的操作以及小巧的架构等特点无不显示出ABIROB A 系列的出众。
优点：⏹简易小巧的模块化设计：方便于维修与维护⏹超薄设计：理想的可达性⏹高稳定性与重复可定位性：最大化的TCP值；TCP可靠性强（即使发生碰撞）。
⏹创新的互锁系统：在TCP保持不变的情况下快速轻松地更换枪颈。
⏹适用于300A,360A与500A(100%暂载率)ABIROB A300 技术参数（EN60 974-7）：符合中国标准GB/T15579.7-2005弧焊设备；第七部分：焊枪额定值：300A CO2、250A 混合气体、M21（EN439）暂载率：100%焊丝直径：0.8～1.4mmABIROB A360 技术参数（EN60 974-7）：符合中国标准GB/T15579.7-2005弧焊设备；第七部分：焊枪额定值：360A CO2、290A 混合气体、M21（EN439）暂载率：100%焊丝直径：0.8～1.4mmABIROB A500 技术参数（EN60 974-7）：符合中国标准GB/T15579.7-2005弧焊设备；第七部分：焊枪额定值：500A CO2、400A 混合气体、M21（EN439）暂载率：100%焊丝直径：0.8～1.6mmABIROB 350 GC气冷式MAG焊枪,350 A持久、耐用、经济ABIROB 350 GC焊枪系统普遍适用于亚洲区域的弧焊工作。
BL-HXXX5A-TRB中文资料
元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx6G-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K00.45 0.018 0.55 0.022Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.5 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531Compartment Length A00.85 0.033 0.95 0.037Compartment Width B0 1.70 0.067 1.80 0.071元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx6A-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K00.65 0.026 0.75 0.030Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531Compartment Length A00.85 0.033 0.95 0.037Compartment Width B0 1.70 0.067 1.80 0.071元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx6D-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K00.94 0.037 1.14 0.045Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531Compartment Length A00.98 0.039 1.18 0.046Compartment Width B0 1.78 0.070 1.98 0.078TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx5A-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063 Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139 Compartment Depth K0 1.20 0.047 1.40 0.055Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531 Compartment Length A0 1.32 0.052 1.52 0.060Compartment Width B0 2.16 0.085 2.36 0.093TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx3-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063 Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139 Compartment Depth K0 1.17 0.046 1.37 0.054Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531 Compartment Length A0 1.78 0.070 1.98 0.078Compartment Width B0 3.40 0.134 3.60 0.142元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx3A-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K0 1.36 0.054 1.56 0.061Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531Compartment Length A0 1.88 0.074 2.08 0.082Compartment Width B0 3.37 0.133 3.57 0.141l DEVICE NUMBER: BL-Hxxx4E-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063 Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139 Compartment Depth K0 1.17 0.046 1.37 0.054Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531 Compartment Length A0 1.00 0.039 1.20 0.047Compartment Width B0 2.15 0.085 2.35 0.093l DEVICE NUMBER: BL-Hxxx4A-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063 Feed Hole Location E 1.63 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139 Compartment Depth K0 1.20 0.045 1.40 0.055Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 16.00 0.629 18.40 0.724 Compartment Length A0 2.20 0.087 2.40 0.094Compartment Width B0 3.20 0.126 3.40 0.134元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxx4C-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimun Maximunmm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K0 1.12 0.044 1.32 0.052Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531Compartment Length A0 1.78 0.070 1.98 0.078Compartment Width B0 3.33 0.131 3.53 0.139元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxxxx6H-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATION元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxxxx3B-TRB¡A BL-Hxxxxxxx3F-TRB¡A BL-Hxxxxxxx3T-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATION元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxxxx4B-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimum Maximummm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139Compartment Depth K0 1.20 0.047 1.40 0.055Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 16.00 0.629 18.40 0.724Compartment Length A0 2.20 0.087 2.40 0.094Compartment Width B0 3.20 0.126 3.40 0.134元器件交易网TAPE AND REEL SURFACE MOUNT CHIP LED LAMPS l DEVICE NUMBER: BL-Hxxxxxxx6T-TRBl FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimum Maximummm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.60 0.063Feed Hole Location E 1.65 0.064 1.85 0.073 Centers Line Dimensions Length Direction F 3.45 0.135 3.55 0.139 Compartment Depth K00.60 0.022 0.80 0.031Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 7.70 0.303 8.30 0.326Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D270.00 2.755 72.00 2.830Fixing Tape Width W1 5.25 0.206 5.35 0.210 Flange Space Between Flanges T 12.50 0.492 13.50 0.531 Compartment Length A0 1.63 0.064 1.83 0.072Compartment Width B0 1.65 0.065 1.85 0.073l DEVICE NUMBER: BL-Xxx61-TR7l FEATURES:Ÿ Compatible with automatic placement equipment Ÿ Surface Mount assembly lampŸ High efficiency low power consumption Ÿ Long life solid state reliability l TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONMinimumMaximum ITEMSYMBOLmminch mm inch Tape Feed Hole Diameter (DIA)D 0 1.40 0.055 1.55 0.061 Feed Hole LocationE 1.65 0.065 1.85 0.072 Centers Line Dimensions Length DirectionF 5.45 0.215 5.55 0.218 Compartment Depth K 0 3.10 0.122 3.30 0.130 Carrier Tape Overall ThicknessK ¢w ¢w 2.40 0.094 Compartment Pitch P 3.90 0.153 4.10 0.161 Sprocket Hole DiameterP 0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length DirectionP 2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w ¢w 0.30 0.012 Carrier Tape Width W 12.00 0.472 12.30 0.484 Flange Diameter A 178.0 7.008 180.0 7.087 Hub Spindle Hole C 12.50 0.492 13.50 0.531 Hub Diameter D 2 20.00 0.788 21.50 0.846 Fixing Tape Width W 1 9.00 0.354 9.30 0.366 Flange Space Between FlangesT 16.00 0.629 18.40 0.724 Compartment Length A 0 2.20 0.087 2.40 0.094 Compartment WidthB 03.900.1544.100.161元器件交易网元器件交易网TAPE AND REEL AXIAL LED LAMPS WITH “YOKE” LEAD l DEVICE NUMBER: BL-Xxx61-TR8l FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATIONSPECIFICATIONITEM SYMBOLMinimum Maximummm inch mm inch Tape Feed Hole Diameter (DIA) D0 1.40 0.055 1.55 0.061Feed Hole Location E 1.65 0.065 1.85 0.072 Centers Line Dimensions Length Direction F 5.45 0.215 5.55 0.218Compartment Depth K0 3.02 0.119 3.22 0.127Compartment Pitch P 3.90 0.153 4.10 0.161Sprocket Hole Diameter P0 3.90 0.153 4.10 0.161 Centers Line Dimensions Length Direction P2 1.95 0.076 2.05 0.080 Carrier Tape Thickness t ¢w¢w0.30 0.012Carrier Tape Width W 12.00 0.472 12.30 0.484Flange Diameter A 178.0 7.008 180.0 7.087Hub Spindle Hole C 12.50 0.492 13.50 0.531Hub Diameter D220.00 0.788 21.50 0.846Fixing Tape Width W19.00 0.354 9.30 0.366 Flange Space Between Flanges T 16.00 0.629 18.40 0.724Compartment Length A0 2.29 0.090 2.49 0.098Compartment Width B07.62 0.300 7.82 0.308元器件交易网TAPE AND REEL AXIAL LED LAMPS WITH “Z” BENT LEAD l DEVICE NUMBER: BL-Xxx61-TR9l FEATURES:ŸCompatible with automatic placement equipmentŸSurface Mount assembly lampŸHigh efficiency low power consumptionŸLong life solid state reliabilityl TAPING AND PACKAGING SPECIFICATION。
BL-HKC35B-AV-TRB佰鸿一级代理推荐资料
S p e c i f i c a t i o n f o r A p p r o v a l● DEVICE NUMBER: BL-HKC35B-AV-TRB ● CUSTOMER:FOR CUSTOMER’S APPROVAL STAMP OR SIGNATUREAPPROVED PURCHASE MANUFACTUREQUALITY ENGINEERINGSAMPLES ATTACHED AREAB L -H KC 35B -A V -T R B2. Backlighting : LCDs, Key pads advertising.3. Status indicators : Comsumer & industrialelectronics.4. General use.● Absolute Maximum Ratings(Ta=25℃)Parameter SymbolRatingUnitPower Dissipation Pd52mWForward CurrentI F 20 mAPeak Forward Current ＊1 I FP 100 mAReverse Voltage V R 5 V Operating Temperature Topr -40℃~85℃ - Storage Temperature Tstg -40℃~85℃ -B R I G H T L E D E L EC T R O N I C S C O R P .B L -H KC 35B -A V -T R B● Electrical and optical characteristics(Ta=25℃)Parameter Symbol ConditionMin. Typ. Max. UnitForward Voltage Vf I F =20mA -2.2 2.6 V Luminous Intensity Iv I F =20mA 63 140- mcdReverse Current I RV R =5V -- 100 µA Peak Wave Length λp I F =20mA -590- nmDominant Wave Length λd I F =20mA 584 - 594 nm Spectral Line Half-width Δλ I F =20mA - 15 - nm Viewing Angle2θ1/2 I F =20mA -120- deg● Typical Electro-Optical Characteristics CurvesFig.2 Forward current derating curveF o r w a r d c u r r e n t (m A )20R e l a t i v e l u m i n o u s i n t e n s i t y (@20m A )10R e l a t i v e r a d i a n t i n t e n s i t y403050Fig.1 Relative intensity vs. wavelengthB R I G H T L E D E L EC T R O N I C S C O R P .B L -H KC 35B -A V -T R B● Tapping and packaging specifications(Units: mm)Quantity:1000-3000PCSB R I G H T L E D E L EC T R O N I C S C O R P.B L-H K C35B-A V-T R B● Bin LimitsIntensity Bin Limits (At 20mA)BIN CODE Min. (mcd) Max. (mcd)P 63 94Q 94 140R 140 210S 210 317 Tolerance for each bin limits ± 15%.Color Bin Limits (At 20mA)BIN CODE Min. (nm) Max. (nm)358458645865885588590659059275925Tolerance for each Bin limit is ± 1nm.V F Bin Limits (At 20mA)BIN CODE Min.(v) Max.(v)B 1.8 2.0C 2.0 2.2D 2.2 2.4E 2.4 2.6Tolerance for each Bin limit is ± 0.05V.●BIN：x x xV F B I N C O D EC o l o r B I N C OD EI n t e n s i t y B I N C O D EB R I G H T L E D E L EC T R O N I C S C O R P .B L -H KC 35B -A V -T R B● Reliability TestClassificationTest ItemReference StandardTest ConditionsResultOperation Life MIL-STD-750D:1026 MIL-STD-883D:1005 JIS-C-7021 :B-1 Ta: Under room temperatureTest time:1,000hrsIF=Product Recommended IF0/32High Temperature High Humidity Storage MIL-STD-202F:103BJIS-C-7021 :B-11Ta:85±5℃ RH:90%-95%Test time:240hrs0/32HighTemperatureStorageMIL-STD-883:1008JIS-C-7021 :B-10Ta:100±5℃ Test time:1,000hrs 0/32EnduranceTestLowTemperature StorageJIS-C-7021 :B-11 Ta: -40±5℃ Test time=1,000hrs 0/32Temperature Cycling MIL-STD-202F:107DMIL-STD-750D:1051MIL-STD-883D:1010JIS-C-7021 :A-2 Ta:-35±5℃~25±5℃~85±5℃~25±5℃ 30min 5min 30min 5min 0/32Thermal Shock MIL-STD-202F:107D(1980)MIL-STD-750D:1051(1995)MIL-STD-883D:1011(1991)Ta:-40±5℃ ~+85±5℃ 10min 10 minTime: 20min/cycle 10cycle0/32WettingbalanceMIL-STD-883:2003MIL-STD-202F:208DMIL-STD-883D:2003Ta:230±5℃ Time:5±0.5s 0/32Environmental Test SolderResistanceMIL-STD-202F:210AMIL-STD-883D:1011JIS-C-7021 :A-1Ta:260±10℃ Time:10±1s0/32● Judgment criteria of failure for the reliabilityMeasuring items Symbol Measuring conditions Judgement criteria for failure Forward voltage V F ( V) I F =20mA Initial Level*1.1 Reverse current I R (uA) V R =5V Over U*2 Luminous intensityIv ( mcd ) I F =20mA Initial Level*0.7Note: 1.U means the upper limit of specified characteristics.2.Measurment shall be taken between 2 hours and after the test pieces have been returned to normal ambient conditions after completion of each test.]B R I G H T L E D E L EC T R O N I C S C O R P .B L -H KC 35B -A V -T R B●IR-Reflow Soldering1. Avoid any external stress applied to the resin while the LEDs are athigh temperature, especially during soldering .2. Avoid rapid cooling or any excess vibration during temperature ramp-down process3. Although the soldering condition is recommended above,soldering at the lowest possible temperature is feasible for the LEDs● Dip Soldering3050100300250200150TEMPERATURE(°C)TIME(sec.)1. Please avoid any external stress applied to the lead-frames andepoxy while the LEDs are at high temperature,especially during soldering2. DIP soldering and hand soldering should not be done more than one time.3. After soldering, avoid the epoxy lens from mechanical shock orvibration until the LEDs are back to room temerature.4. Avoid rapid cooling during temperature ramp-down process5. Although the soldering condition is recommended above,soldering at the lowest possible temperature is feasible for the LEDs● IRON Soldering300℃Within 3 sec.,One time only.● Notes for designing:Care must be taken to provide the current limiting resistor in the circuit so as to drive the BRIGHT LEDs within the rated figures. Also, caution should be taken not to overload BRIGHT LEDs with instantaneous voltage at the turning ON and OFF of the circuit.When using the pulse drive care must be taken to keep the average current within the rated figures. Also, the circuit should be designed so as be subjected to reverse voltage when turning off the BRIGHT LEDs.● Storage:In order to avoid the absorption of moisture, it is recommended to solder BRIGHT LEDs as soon as possible after unpacking the sealed envelope.If the envelope is still packed, to store it in the environment as following: (1) Temperature : 5℃-30℃(41℉)Humidity : RH 60﹪Max.(2) After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, orequivalent soldering process must be: a. Completed within 168 hours. b. Stored at less than 30% RH.(3) Devices require baking before mounting, if:(2) a or (2) b is not met.(4) If baking is required, devices must be baked under below conditions:48 hours at 60℃±3℃.● Package and Label of Products:(1) Package: Products are packed in one bag of 3000 pcs (one taping reel) and a label is attachedon each bag. (2) Label:BRIGHT LED LOGOPart No. Quantity BIN. Sealing Datexx xx xx Location。
BWD锁控板测试工具使用说明书
锁控板测试工具使用说明书杭州百尉达科技有限公司目录1.软件概述 (1)2.安装说明 (1)3.软件功能 (2)3.1主界面 (2)3.2设备连接 (2)3.3设备信息 (6)3.4控制输出 (7)3.5调试信息 (9)3.6灯控独立控制 (9)4.售后服务支持 (12)本软件是一款用于我公司锁控板测试的工具软件，通过本软件可以用来测试我公司各款锁控板的功能，以及辅助现场调试测试，或对锁控板做一些参数配置，客户在具体项目上使用锁控板时，只需读取一些状态或数据，发送控制命令，就可以实现项目的需求，也可以用此工具分析命令和回应数据，便于开发集成，可以简单评估现场通信质量，快速定位工程问题。
2.安装说明通过相应的安装包进行安装或直接复制相关文件到电脑即可。
在使用本软件前，请先仔细连接硬件设备，可以参考下图：3.1主界面图1系统主界面如图1所示，安装完软件后打开exe启动程序进入软件主界面，软件界面布局如图。
软件界面上方分为串口信息、基本信息、设置等三部分，界面中间部分为通道控制，界面下方部分为调试信息栏，具体功能在对应模块介绍。
3.2设备连接图2设备连接如图2所示，在软件界面上方处为设备连接功能。
该栏会选择和显示当前连接设备的波特率、地址和端口。
设备连接时，先将设备通过端口连上电脑，此时再打开软件时会发现“端口”这栏下拉选项中多了一个选项，此时选择该端口（com4）即可。
选择端口后需要下拉选择对应的波特率和地址，选择完成后点击“打开端口”按钮打开端口即可。
（写说明书的计算机上自带COM1口，现在我们的锁控板接在USB转485的模块上，扩展出COM4口,故选择了COM4.实际使用是要根据实际选择COM口）注意：如果端口下拉框为空，计算机上可能没有串口或串口被其他软件占用。
另外如果忘了所测设备的波特率和地址，可以先打开端口后通过“设备查找”功能查找设备。
点击按钮后会弹出设备搜索窗口，窗口如图3所示。
图3设备查找在设备查找窗口中，可以选择需要查询的地址范围（默认1-10需要自己设置范围）以及勾选波特率型号（波特率默认9600，其他波特率需要自己勾选，我公司出产板子默认波特率为9600），设置完成后点击“开始查找”按钮即可开始搜索指定范围内特定波特率的设备，搜索到的设备会在页面下方显示其基本信息，如图4。
物性表1
弹性体物性表类型比重熔融指数拉伸强度拉伸比TR-6528 1.0811.5 5.87126.58０度透明0.89260.59》800 E-0380.88100.32》1500 E-038透明（07.5.9）0.88150.71255 P-40B 本粘 1.278.7 1.05292 P-55B本粘（07-5-25） 1.2 1.4 1.46198.9 TE - 4525V本色 1.18711.6 1.5676 TE-10005A半透明0.94 4.059.11196 JEA050831-08TE-100透明（07-5-13） 0.9 4.819.84524.85 TE-120A0.98.121.28409.98 TE-15A透明0.88 3.5 1.61225 TE-2006A半透（圆粒）0.94 1.2 1.97772.23 TE-2025本粘 1.180.9 1.42477.05 TE-206A透明（圆粒）0.87 1.25 1.58694.54 TE-20A透明0.910.6 2.06863 TE-25A本粘 1.16 1.75 1.07》800 TE-25A透明A 0.8760 1.86668.35 TE-25A透明A(32#) 0.8836 2.48749.64 TE-25A透明A(3446#) 0.8848 2.35775.46 TE-3005A半透明0.95 3.75 1.6663 TE-3006A半透（圆粒）0.95 2.1 1.8519.95 TE-3025A本粘 051028-05 1.191 1.1536 TE-306A透明（圆粒）0.87 5.2 1.84610.39 TE-30A透明0.89 1.8 1.53892TE-3505半透明0.94 2.5 1.98649 051101-03TE-3515B半透 1.05 2.45 2.01432.2 TE-3520B 1.07 2.9 1.63410.5TE-3525A本粘1.21 1.2 1.19540 JEA060214-01TE-3525A本粘(07-5-26) 1.15 1.6 1.91364.52TE-3525E本粘1.163 1.03363 0511025-11TE-3525雾黑(07-5-26) 1.244 1.3313.41 TE-35A透明A0.9112.2 3.22756.4 TE-4005A半透P0.99 4.46 1.97372.48TE-4005A半透明0.94 2.8 2.21567 050909-06TE-4005H半透明 11.18A0.99 2.4 2.1701 TE-4006A半透（圆粒）0.94 1.7 2.23807.2 TE-4025E本粘 1.137 1.3 1.67568 TE-4026E本粘（07-5-17） 1.1916 1.8899.96 TE-406A透明（圆粒）0.8710.5 5.07922.34 TE-40A透明0.88 3.4 2.56921TE-40A透明（07-5-31）0.89 2.86（5KG） 5.6523TE-40B本粘（07-5-25） 1.18 1.2TE-4501A半透123.5 2.98683.35 TE-4505A半透(07-5-10)0.95 2.97 1.65205.23 TE-4505A半透明0.95 2.3 2.25434.5 TE-4505A半透明010.96 1.6 1.99375 TE-4525AR本色（07-06-2） 1.1930.08 1.51254.7 TE-4525A本粘1.152.7 1.3378 JEA051123-03TE-4525B本色（07.5.8） 1.1911.6 2.06551.7TE-4525E本粘1.137 1.3 1.67568 051023-04TE-4540E本粘（07.5.9） 1.2333.6 1.9894.79 TE-4540E本粘（07-5-25） 1.288.98A06-11-290.917 4.98》800 TE-45A透明TE-5006A半透（圆粒）0.95 3.3 2.27449.32 TE-5010P 1.0413.6 2.31469.3 TE-5018B半透(07-5-10) 1.11 2.34 1.67178.75 TE-5025A本粘 051129-02 1.18 1.2 2.12511 TE-5025A本粘(561) 1.18 1.7 2.14343.34 TE-5025B本粘(07-5-10) 1.167.72182.68 TE-5025B本粘（圆粒） 1.17 1.8 2.04405.7 TE-5025E本粘 051025-04 1.17 6.8 1.29422 TE-506A透明（圆粒）0.8719 6.231011.42 (060528-10B)0.88 1.4 4.021037 TE-50A透明TE-50本增（07-5-11） 1.2533.58 1.6979.46 TE-5501A本增（07-5-13） 0.959 4.92590.44 TE-5505A半透明0.97 1.8 3.99994.7 TE-5525B雾黑 1.1715.7 4.32445.9 TE-5525B雾黑(07-5-26) 1.16 1.5 2.93359.45 TE-5525本粘（07.5.9） 1.16 3.7 2.23100.2 TE-55A透明B060322A0.91 2.4 3.04449 TE-5820B雾白（07.5.9） 1.1 3.78 2.65102.27 TE-6005A半透（07-6-4）0.939.2TE-6005A半透（3151）0.97 3.7 3.59-4.28435.29 TE-6005A半透（4610北京）0.964--7 2.87-3.35466.64 TE-6005A半透明0.96 6.6 2.96548 TE-6005P雾黑（07-5-12） 1.14 1.81 2.69225.54 TE-6005半透（07-5-17）0.95 3.9 2.93174 TE-6006A半透（圆粒）0.957.5 3.75431.47 TE-6010A半透(07-5-26)1 3.6 2.19288.28 TE-6010B半透 1.02 5.45 3.41442.5 TE-6010B亮黑0.99 1.5 4.46615 TE-6010E半透明0.9742 3.39437 TE-6018B半透 1.1 4.7 3.05446.72 TE-601A透明0.890.8 3.11433.171.167 1.74244TE-6025A本粘1.148 1.81300改成TE-6025P雾黑TE-6025B本粘（圆粒） 1.14 3.05 2.48339.1 TE-6025B雾黑 1.115 2.03349 TE-6025B雾黑（07-6-4） 1.15 1.81TE-6025B雾黑Y（07-5-11） 1.13 2.45 3.75444.49TE-6025E本粘1.12342.46274 051025-12TE-606A透明（圆粒）0.87207.14883.29 051025-050.8916.6 6.561269 TE-60A透明TE-60A透明（2/6）0.88 3.87.55847.74 TE-60A透明（加23油）0.878.2 6.67814.72 TE-60A透明（加25油）0.8816.8 6.44706.14 060117B0.9 4.6 2.92326 TE-60A透明BTE-6508A半透（07.5.8）0.9414 2.91247.34 TE-6510A半透（07-5-11） 1.04 5.6 2.86322.32 TE-6510B半透（07.5.8） 1.010.8 3.28154.41 TE-6510B半透（克玛） 1.02 5.18 3.18171.71 TE-6510B亮黑0.99 1.5 4.46615 TE-6515B 1.05 1.1 3.85743 TE-6518A半透（07.5.8） 1.0914 6.33125.09 TE-6575透明0.897.457.31998.23 TE-7005A半透（07.5.9）0.967.5 3.76183.43 TE-7005A半透（07-5-12）0.95 5.65 4.53134.1 TE-7005A半透（07-5-14）0.9510.2 3.62154.27 TE-7005A半透（07-5-17） 0.95 4.7 3.65237.65 TE-7005A半透(07-5-26)0.96 2.66 3.68287.58 TE-7005P黑色0.9814 4.13490.7 TE-7006A半透（圆粒）0.958.85 3.43312.09 TE-7010E半透明 1.02629.8 4.67351TE-7010P半透明1.01414 3.75178 051116-01TE-7010亮黑0.9710 5.01584TE-7018B半透明1.0622.7 2.44240 051118-01TE-7020D本粘 1.1219 2.6288 TE-7025A本粘 (060605B) 1.12 5.3 2.3271 TE-7025B本粘（圆粒） 1.15 5.65 3.04269.63 TE-7025雾黑 1.12 5.5 2.65184TE-70A透明0.87257.751245 JEA051014-04TE-70A透明（圆粒）0.87228.26726.89TE-7505E半透明0.9428 3.51327 051104-03TE-7505P0.9711.4 5.43373 TE-7510B半透（07-6-4）1 6.61.06 3.29 3.28255.29TE-7525E本粘1.1767 3.65288 051025-13TE-8000A透明0.8910 5.68239 TE-8005A半透（07-5-12）0.96 6.92 4.58199.78TE–8005A半透明0.9416 4.52270 060628TE-8005E半透明0.9414.9 3.68356 TE-8005H半透明0.9419.4 4.5460 TE-8006A半透（圆粒）0.9414 5.21311.11 TE-8025A本粘 1.129 5.62》400 TE-8025B本粘（圆粒） 1.14 5.4 3.87262.62 TE-8025K本粘 1.09 4.8 5.64383 TE-8025雾黑 1.097.3 3.49228 TE-80A25本粘（07-6-4） 1.0910.08TE-80A透明0.915 6.63678.9 TE-80A透明（07-5-13）0.98.210.03495.04 TE-80A透明（圆粒）0.872210.6713.62 TE-80A透明H（07/07/22） 0.91 2.4314.89841.68TE-8505A半透明0.9610.4 6.1324 050927-04TE-8505B半透明0.957 6.15320TE-8515P半透明1.006 3.8 4.22231 051223-03TE-8525A本粘 1.129 5.62》400 TE-8525A本粘（07-5-25） 1.1 5.4TE-8525P雾黑 1.11 5.05 6.05293.48 TE-85A透明0.87359.2710TE-9005A0.9539.07255 (060102-01)TE-9013透明0.97.649.69373.24 TE-9025A本粘 1.14 5.2 6.21212 TE-9025B本粘（07.5.9） 1.1 3.78 2.65102.27 TE-9057A0.892011.92580.62 TE-9075A透明0.9121.316.51724.32 TE-90A黑色 1.1797.15212 TE-90A透明0.9227.98636 TE-9515B0.98 2.88.4184 TE-9875A透明0.8914.518.47693.36 TE-A045B半透明 1.03 1.7 1.94651 TEA-40A透明（07-5-31）0.8819.4 3.59668 TEA-5005A半透0.97 1.86 2.93347.24 TEA-6005A半透 1.04 6.88 6.37591.26 TEA-603A半透 1.057.99 5.06422.68 TEA-7005A半透0.94 4.88 3.57263.11 TEA-702A透明0.910.69 5.94368.53 TEA-8005A半透0.96 3.3 5.69357.070.927.959.87588.09TEA-90A半透0.94 4.357.82320.41TE-B-45A0.9350 2.28131 TE-B-45A半透0.9725.4 2.25480.58 TE-O度0.8792 1.22不断TES-5061A半透 1.0963.32 2.17548.04 TES-68A半透 1.0511.92 5.53484.74 TES-70A半透 1.0415.98 4.15377.94 TES-85A半透 1.02 2.811.57638.29 TE-V-55A0.9510.7 1.08451.6 TE-黑色(厉R)0.9968 1.3175 TPA-50A本色（07-5-13） 1.0210.8 2.27500.24 TPR-60B本色 1.12 4.9 3.37294.65 TR-1010半透明0.9858.1 1.161104 TR-1025本色 1.07720.51272 TR-10A透明0.89170.36>800 TR-2018透明 1.0333 1.03586 TR-2025A本色 1.1830 1.57643.97 TR-3005A半透明0.9514.490.84418 060103-05TR-3025A本色 1.121411533 TR-3025亮黑（07-5-25） 1.1947 1.59546.37 TR-30A25本色（07-5-17） 1.1417 2.07429.84 TR-30A半透0.9740 3.07906.51 TR-30A透明0.8917.25 1.134499.2225 2.17930.7 TR-30A透明TR-30A透明（07-5-26）0.9217（0.325） 1.72625.25TR-3502透明B0.9311.5 1.95846 051214-04TR-3506透明0.9131 5.31831.64 TR-3525A本色TR-35A透明0.9113.1 1.49388 050919-08TR-35透明B0.897.8 2.4977.62 TR-4005A半透（07-5-11）0.98 2.16 3.09792.14 TR-4010A 1.0320.8 3.69840.4 TR-4018A半透明 1.0832 2.02730 TR-4025A本色 1.1454 1.45691 TR-4025黑 1.239 1.72371 TR-4026A本色 1.2257 1.88780.98 TR-4028亮黑（07-5-12） 1.2241.62 1.56406.67 TR-40A透明(07-5-10)0.9252.68 3.15846.5 TR-40A透明（07-5-26）0.9315.4(0.325) 2.21699.78 TR-4501A透明(07-5-10)0.94603660.91 TR-4505A半透明0.9723 2.47621 TR-4505B半透0.9925 2.1742 TR-4505E半透0.99 4.4 4.6710091.13428 1.53670TR-4525本色 1.2140.9 3.02216.89 TR-4525亮黑（07-5-25） 1.1831 2.66197.3 TR-45A25本色(07-5-26) 1.15 6.7 2.38440.31 TR-45A透明0509220.9057.2 2.4458710-13A0.919.7 2.831027 TR-45A透明BTR-48A透明（07-5-14）0.9240 3.19709.69 TR-5005B半透明0.9732 2.57543 TR-5015A 本色 1.0117.2 2.54523 TR-5018A半透（07-5-17） 1.0918 3.58199 TR-5018B半透（07-5-13） 1.0810.8 2.7187.03 TR-5025A本色 1.1527.5 2.9275.97 TR-50A (南海一铭)0.9912.65 4.77451.15 TR-50AT 1.048 3.18639 TR-50A半透（07-5-11）0.998 4.17593.37 TR-50A亮黑 1.2815 2.19227 TR-50A透明(07-5-10)0.93 5.8 3.94881.16 TR-50A透明010.93 6.15 6.89>1500 TR-5505B半透0.9818 3.46378 TR-5525A本色（07-5-13） 1.1710.8 3.27203.59 TR-5525亮黑 1.1531 2.46143 TR-5525亮黑001 1.1331 2.36158.77 TR-55A透明0.9349 2.38506 TR-55A透明（07-5-26）0.92 4.1(0.325) 3.61837 TR-55A透明(07-5-26)0.92 4.1 3.61837 TR-6005A半透明0.9915 3.27510 TR-6005B半透0.9713.6 3.49504 TR-6005B半透明0.9913.6 3.56517 TR-6015A半透明 1.0612 4.34224 TR-6015B半透明 1.069 4.85312 TR-6018A半透明 1.0621 4.62276 TR-6020亮黑（07-5-21） 1.1110 4.8594.23 TR-6025A本色 1.1610.6 4.44198 TR-6025亮黑（07-5-17） 1.1717 4.46121.6 TR-605A透明0.9417 5.83888.36 TR-60A本色 1.15413 3.81173 TR-60A亮黑 1.2710 2.75176 TR-60A透明0.94 3.9 2.98638 07-1-300.9 6.38.59923.23 TR-60A透明TR-60A透明（07-5-12）0.9421.2 4.26771.87 TR-60A透明（07-6-4）0.9421TR-60A透明B0.94 5.9 5.571333.75 TR-6505亮黑 1.1615 6.6375.42 TR-6518A半透明 1.0618 5.3202 TR-6518半透明 (改料 1.0811.5 5.87126.58 TR-6525A本色10.6 4.44198.87 TR-6530A本色 1.2310.2 4.63174.360.998 5.58195.16TR-65A透明0.9414.25 4.41645.17 TR-65A雾黑0.97 6.23 3.14261.86 TR-7005B半透（07-5-17） 0.9912.3 5.33365 TR-7005B半透明0.987.5 5.94587 TR-7015A半透明0.9712.7 5.76184 TR-7020本色 1.05 5.82 4.09286.27 TR-7025A本色 1.159.7 5.22144.63 TR-7025A本色(07-5-10) 1.159.7 5.74119.56 TR-7025亮黑 1.1812.6 5.03155 TR-70A透明0.95 6.3 4.21421 TR-70A透明（07-6-4）0.957.06TR-70A透明B0.936 5.8510.63>1500 TR-7525A本色 1.159.56 6.65143.61 TR-758A半透（07.5.13）0.9910.02 5.77158.7 TR-758A半透（07.5.8）10 5.88158.71 050822-000.95 4.5 6.41796 TR-75A透明TR-75A透明（07-5-12） 0.96 6.23 6.48386.64 TR-8005A01半透明 1.0311.8 6.24257 TR-8005A半透明 1.0211.8 5.86285.29 TR-801A透明0.9621.4 6.1463.5 TR-8020A本粘 1.087.18.69153.72 TR-8025A本粘 1.1117.7 6.1111.11 TR-80A半透明0.979.67.1185 060104-010.957.5 5.63581 TR-80A透明060703A 6.5 6.27411 TR-80A透明TR-80A透明（07-5-12）0.956 5.62356.9 TR-8505A半透明 1.0211.28.29204.5 TR-8515A半透明 1.05 5.210.16155.7 TR-8525A本粘 1.1614.2 6.44145.71 051011-020.96 4.87.31631 TR-85A透明TR-9010A本色 1.19.811.29119 TR-9015A半透明 11.25B 1.056 6.611160.55 TR-9025A本色 1.19.57.07156 TR-9025A本色（07-5-11） 1.149.39.784.14 TR-9025亮黑 1.18 6.3 6.22184 TR-90A透明0.96 5.85 6.46344.32 TR-9525A本色（07-5-11） 1.111.4511.6472.5 051116-100.97 3.411.73724 TR-95A透明本增115（07-6-4） 1.66 3.5硬度颜色650透明0透明0透明40本粘55本色45本色100半透45D透明70透明15透明20半透20本色20透明ok 20透明25本粘25透明25透明25透明30半透30半透35本粘30透明30透明35半透35半透35半透35本粘35本色35本粘35雾黑30透明40半透40半透40半透40半透40本色40本色40透明40透明40透明40本色45半透45半透45半透45半透45本色45本粘45本色45本粘45本色45本色后标准45透明50半透50本色50半透50本粘50半透50本色50本粘50本粘50透明50透明50本色55本增55半透55雾黑55亮黑55本色55透明58雾白60半透59半透59半透60半透60雾黑60半透60半透60半透60半透60亮黑60半透60半透60透明60本粘60本粘60本粘60雾黑60雾黑60雾黑60本粘60透明60透明60透明60透明60透明60透明65本色65半透65半透65半透60亮黑65黑色65半透65透明70半透70半透70半透70半透70半透70黑色70半透70半透70半透70亮黑70半透70本粘75本粘70本粘70雾黑70透明70透明75半透75半透75半透75半透75本粘80透明80半透80半透80半透80半透80半透85本粘80本粘80本粘80雾黑80本色80透明80透明80透明80透明85半透85半透85半透85本粘85本色85雾黑85透明90本色90黑色90本粘58本色90透明90透明90黑色90透明95本色45透明45半透40透明50半透60半透60半透70半透70透明80半透85透明90半透45半透45半透0透明50半透68半透70半透85半透55黑色40黑色50本色60本色10半透明10本色10透明20透明20本色30半透明30本色30亮黑30本色30半透30透明30透明30透明ok35透明30透明本色35透明35透明40半透40半透40半透明40本色40亮黑ok2007-5-25 40本色40亮黑40透明40透明45透明45半透明45半透明45半透明45本色45本色45亮黑45本色45透明45透明48透明50半透明50本色50半透50半透50本色50半透50半透明50半透50透明50透明50透明55半透明55本色55亮黑55半透明55透明55透明55透明60半透明60半透明60半透明60半透明60半透明60半透明68亮黑60本色60亮黑60透明60本色60亮黑60透明60透明60透明60透明 60透明65亮黑65半透明65半透60本色65本色65半透65透明65雾黑70半透70半透明70半透明70本色70本色70本色70亮黑70透明ok 70透明70透明75本色75半透75半透75透明75透明80半透明80半透明80透明80本粘80本粘80半透明80透明80透明80透明85半透明85半透明85本粘85透明90本色90半透明90本色90本色90亮黑90透明95本色95透明45本色。
蓝牙耳机说明书：蓝牙耳机B350-XT
BlueParrottB350-XTUser Manual BPB-35020© 2019 GN Audio A/S. All rights reserved. BlueParrott® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.Made in ChinaMODEL: OTE9211. Welcome (4)2. BlueParrott B350-XT overview .52.1 Included accessories3. How to wear (6)4.1 Adjust headband tension4. How to charge (8)5. How to connect (10)5.1 Power on/off5.2 Pair to your smartphone5.3 Connect to your smartphone using NFC6. How to use (13)6.1 Calls6.2 The Parrott Button TM6.3 Multiple call handling6.4 Voice commands6.5 Multipoint mode6.6 How to reset7. BlueParrott app (18)8. Support (19)8.1 FAQ8.2 How to care for your headset1. WelcomeThank you for using the BlueParrott B350-XT. We hope you will enjoy it!BlueParrott B350-XT features• Blocks out 96% of background noise• Up to 24 hours of talk time• Customizable Parrott Button TM• Tough, IP54-rated design• Improved, more comfortable headband• VoiceControl TM• Large, easy-to-press buttons• Wireless range of up to 300 feet/100 meters2. BlueParrott B350-XToverview2.1 Included accessories3.How to wear3.1 Adjust headband tensionIf the headband feels too tight or too loose, it is possible to reshape the metal part of the headband for a more comfortable fit.To adjust the tension of the headband, firmly grip the headset and stretch out, or squeeze in, the metal to reshape it to your preference. You may need to use considerable force to adjust the shape of the headband.4. How to chargeTo charge the headset, connect the USB charging cable to the headset’s USB charging port. It is recommended to charge the headphones using the supplied charging cable, however it is possible to use a compatible charger. It takes approx. 3.5 hours to fully charge the battery.While charging, the LED indicator shows the charging status. Red indicates the headset is charging. Blue indicates the headset is fully charged.Charging Fully charged5. How to connect5.1 Power on/offPress and hold the Multifunction button until the LED flashes red and you hear “Power on” orPower on Power off5.2 Pair to your smartphone1. Ensure the headset is powered off.2. Press and hold the Multifunction button until you hear “Power on”. Continue to hold the button for approx. 6 more seconds until the LED flashes alternating blue and red and you hear “Pair mode”. The headset is now ready to pair.3. Go to the Bluetooth menu on your25.3 Connect to your smartphone usingNFC1. Ensure your headset is powered on, and that NFC is enabled on your smartphone.2. Place the NFC zone of your smartphone against the NFC zone of the headset until your smartphone confirms the connection.6.Assistant (i.e. Siri, Press theMultifunction buttonbuttons simultaneouslyRedial last number button until you hearAlternatively, press andhold(2 sec) the6.2 The Parrott Button TMBy default, the Parrott Button activates your voice commands when not on a call, or mutes the microphone when you are on a call. However, the button can be configured for other functions, such as speed dial.To change the Parrott Button functionality, download and use the BlueParrott app for Android or iOS.6.3 Multiple call handlingThe headset can accept and handle multiple calls at the same time.and answer an incoming call Multifunction button twice6.4 Voice commandsTo use voice commands, press the Parrott button and issue a command. Alternatively, say “What can I say?” for a list of commands.What can I say?Provides a list of available voicecommandsPhone Command Activates the voice assistant on the connected smartphone (Siri or Google Assistant)Answer Accepts an incoming callIgnore Rejects an incoming call and forwardsit to voicemail (if available)Pair mode Puts the headset into pairing modeAm I connected?Verifies if the headset is connected to a smartphone, and will also announce the signal strength (phone dependent)Check battery Announces the battery level of the headset and the paired smartphone (if applicable)Redial Redials the last outgoing callCallback Dials the last incoming call (if # isavailable)6.5 Multipoint modeThe headset can be paired to 8 smartphones and can be connected to two at once (Multipoint mode).To connect to two smartphones, use the normal pairing process separately for each smartphone (refer to section 5).The BlueParrott B350-XT will monitor both smartphones and enable you to answer a call on either one using the headset.If you are on a call and the other smartphone receives a call, you will hear a notification in the headset.6.6 How to resetResetting the headset clears the list of paired devices.1. Ensure the headset is powered on.2. Press and hold (6 sec) both the Volume up and Volume down buttons until you hear two beeps followed by “Pair mode”, or until the LED flashes alternating red and blue.You will need to re-pair the headset to your7. BlueParrott appBlueParrott appProgram your Parrott Button TM anywhere, anytime.Push-to-talk to your contacts on Dial2Do’s MySay network.Easily access full user guidefor your headset.BlueParrott app Program your Parrott Button TManywhere, anytime.Push-to-talk to your contacts onDial2Do’s MySay network.8. Support8.1 FAQView the FAQs on /help/b350xt-BPB350208.2 How to care for your headset• To prevent the depletion of the battery lifetime or capacity, avoid storing the headset in hot or cold environments, such as a closed truck in summer or in winter conditions.• If the headset becomes dirty, it is recommended to clean it with a soft, lint-free cloth that has been dampened with clean water.• Do not store the headset for extended periods of time without recharging them (max. three months).。
施耐德电气接近开关产品说明书
Sybil 圆柱形接近开关高性能 多行业 经典之选p 品类齐全的接近开关：轻松选型，优化成本的理想选择 p 极强的抗电磁干扰能力：实现变频器运行环境下的高速计数应用p 产品设计人性化：防松安装螺母，耐曲折电缆，以及360度可视LED 指示灯p 全面保护功能：IP67防护等级，带极性反接、过载及短路保护p国内常备库存：更快交货期电梯> 防逆转检测> 超速保护检测> 梯级丢失检测机床> 机构到位包装> 机械臂位置检测> 工作台位置检测> 张力控制塑机> 顶针到位> 溶胶控制> 锁模到位或开模到位> 调模厚度控制搬运> 工作台位置检测>负载中维持升降台的平稳施耐德电气(中国)有限公司Schneider Electric (China) Co., 北京市朝阳区望京东路6号施耐德电气大厦邮编: 100102电话: (010) 8434 6699传真: (010) 8450 1130Schneider Electric Building, No. 6, East WangJing Rd., Chaoyang District Beijing 100102 P .R .C.Tel: (010) 8434 6699Fax: (010) 8450 11302017.10SCDOC1412施耐德电气中国版权所有由于标准和材料的变更，文中所述特性和本资料中的图像只有经过我们的业务部门确认以后，才对我们有约束。
本手册采用生态纸印刷客户关爱中心热线：400 810 M8 埋入式1.5 N O PNP 成型电缆(L=2m) 1000 ≤50 XS108BLPAL2C XS108BLPAL2 XS108BLPAL5 M8连接器 1000 ≤50 XS108BLPAM8 M12连接器 1000 ≤50 XS108BLPAM12C XS108BLPAM12 NPN 成型电缆(L=2m) 1000 ≤50 XS108BLNAL2C XS108BLNAL2 M12连接器 1000 ≤50 XS108BLNAM12C XS108BLNAM12 NC PNP M12连接器 1000 ≤50 XS108BLPBM12C NPN 成型电缆(L=2m) 1000 ≤50 XS108BLNBL2C M12连接器 1000 ≤50 XS108BLNBM12C 非埋入式2.5 N O PNP 成型电缆(L=2m) 1000 ≤50 XS208BLPAL2C XS208BLPAL2 成型电缆(L=5m) 1000 ≤50 XS208BLPAL5C XS208BLPAL5 M8连接器 1000 ≤50 XS208BLPAM8 M12连接器 1000 ≤50 XS208BLPAM12 NPN 成型电缆(L=2m) 1000 ≤50 XS208BLNAL2C XS208BLNAL2 M12 埋入式 2 N O PNP 成型电缆(L=2m) 2500 ≤200 XS112BLPAL2 成型电缆(L=3m) 2500 ≤200 XS112BLPAL3 成型电缆(L=5m) 2500 ≤200 XS112BLPAL5 M12连接器 2500 ≤200 XS112BLPAM12 NPN 成型电缆(L=2m) 2500 ≤200 XS112BLNAL2 M12连接器 2500 ≤200 XS112BLNAM12 NC PNP 成型电缆(L=2m) 2500 ≤200 XS112BLPBL2 M12连接器 2500 ≤200 XS112BLPBM12 非埋入式 4 N O PNP 成型电缆(L=2m) 1200 ≤200 XS212BLPAL2 成型电缆(L=3m) 1200 ≤200 XS212BLPAL3 成型电缆(L=5m) 1200 ≤200 XS212BLPAL5 成型电缆(L=10m) 1200 ≤200 XS212BLPAL10 M12连接器 1200 ≤200 XS212BLPAM12C XS212BLPAM12 NPN 成型电缆(L=2m) 1200 ≤200 XS212BLNAL2C XS212BLNAL2 成型电缆(L=7m) 1200 ≤200 XS212BLNAL7 成型电缆(L=10m) 1200 ≤200 XS212BLNAL10C M12连接器 1200 ≤200 XS212BLNAM12 NC PNP 成型电缆(L=2m) 1200 ≤200 XS212BLPBL2 NPN 成型电缆(L=2m) 1200 ≤200 XS212BLNBL2 M18 埋入式5 N O PNP 成型电缆(L=2m) 1200 ≤200 XS118BLPAL2 成型电缆(L=5m) 1200 ≤200 XS118BLPAL5 M12连接器 1200 ≤200 XS118BLPAM12 NPN 成型电缆(L=2m) 1200 ≤200 XS118BLNAL2 成型电缆(L=5m) 1200 ≤200 XS118BLNAL5 M12连接器 1200 ≤200 XS118BLNAM12 NC PNP 成型电缆(L=2m) 1200 ≤200 XS118BLPBL2 M12连接器 1200 ≤200 XS118BLPBM12 NPN 成型电缆(L=2m) 1200 ≤200 XS118BLNBL2 非埋入式8 N O PNP 成型电缆(L=2m) 500 ≤200 XS218BLPAL2 成型电缆(L=5m) 500 ≤200 XS218BLPAL5 成型电缆(L=10m) 500 ≤200 XS218BLPAL10 M12连接器 500 ≤200 XS218BLPAM12C XS218BLPAM12 NPN 成型电缆(L=2m) 500 ≤200 XS218BLNAL2C XS218BLNAL2 成型电缆(L=5m) 500 ≤200 XS218BLNAL5C XS218BLNAL5 成型电缆(L=7m) 500 ≤200 XS218BLNAL7 M12连接器 500 ≤200 XS218BLNAM12 NC PNP 成型电缆(L=2m) 500 ≤200 XS218BLPBL2 NPN 成型电缆(L=2m) 500 ≤200 XS218BLNBL2 M30 埋入式10 N O PNP 成型电缆(L=2m) 500 ≤200 XS130BLPAL2 M12连接器 500 ≤200 XS130BLPAM12 NPN 成型电缆(L=2m) 500 ≤200 XS130BLNAL2 M12连接器 500 ≤200 XS130BLNAM12 NC PNP 成型电缆(L=2m) 500 ≤200 XS130BLPBL2 M12连接器 500 ≤200 XS130BLPBM12 非埋入式15 N O PNP 成型电缆(L=2m) 300 ≤200 XS230BLPAL2 成型电缆(L=5m) 300 ≤200 XS230BLPAL5 M12连接器 300 ≤200 XS230BLPAM12C XS230BLPAM12 NPN 成型电缆(L=2m) 300 ≤200 XS230BLNAL2C XS230BLNAL2 成型电缆(L=5m) 300 ≤200 XS230BLNAL5C 成型电缆(L=7m) 300 ≤200 XS230BLNAL7 成型电缆(L=10m) 300 ≤200 XS230BLNAL10C M12连接器 300 ≤200 XS230BLNAM12 NC PNP 成型电缆(L=2m) 300 ≤200 XS230BLPBL2金属外壳，圆柱型，DC3线 注：M12/M18/M30后缀为C的型号为电梯行业专用型号，更多订制需求，请与当地办事处联系。
futaba舵机详细资料
45.0 g40.9×20.1×36.1 mm4.8V:4.8V:9.6 千克/厘米0.15 秒/60°6.0V:6.0V:73.0 g 40.4×21.1×38.4 mm 31.0 千克/厘米0.14 秒/60°4.8V:4.8V:26.0 g35.5×15.0×28.6 mm5.5 千克/厘米0.15 秒/60°6.0V:6.0V:7.0 千克/厘米0.12 秒/60°4.8V:4.8V:51.0 g 48.0×27.9×24.9 mm 8.0 千克/厘米0.13 秒/60°4.8V:4.8V:64.0 g39.9×20.1×36.8 mm14.4 千克/厘米0.19 秒/60°6.0V:6.0V:18.0 千克/厘米0.15 秒/60°4.8V:4.8V:59.5 g 39.9×20.1×36.8 mm 3.8 千克/厘米0.06 秒/60°4.8V:4.8V:58.0 g39.9×20.1×37.1 mm10.0 千克/厘米0.16 秒/60°6.0V:6.0V:12.6 千克/厘米0.13 秒/60°4.8V:4.8V:58.0 g39.9×20.1×37.1 mm8.4 千克/厘米0.13 秒/60°6.0V:6.0V:10.6 千克/厘米0.10 秒/60°4.8V:4.8V:51.0 g 39.9×20.1×36.8 mm 3.8 千克/厘米0.06 秒/60°4.8V:4.8V:26.0 g 36.1×15.0×27.9 mm 2.6 千克/厘米0.07 秒/60°4.8V:4.8V:63.0 g39.9×20.1×37.1 mm12.5 千克/厘米0.16 秒/60°6.0V:6.0V:15.6 千克/厘米0.13 秒/60°4.8V:4.8V:63.0 g39.9×20.1×37.1 mm14.4 千克/厘米0.19 秒/60°6.0V:6.0V:18.0 千克/厘米0.15 秒/60°4.8V:4.8V:58.0 g39.9×20.1×37.1 mm8.5 千克/厘米0.13 秒/60°6.0V:6.0V:10.6 千克/厘米0.10 秒/60°4.8V:4.8V:58.0 g39.9×20.1×37.1 mm11.2 千克/厘米0.18 秒/60°6.0V:6.0V:14.0 千克/厘米0.14 秒/60°4.8V:4.8V:44.0 g40.9×20.1×24.9 mm7.3 千克/厘米0.13 秒/60°6.0V:6.0V:9.2 千克/厘米0.10 秒/60°4.8V:4.8V:26.0 g36.1×15.0×27.9 mm5.5 千克/厘米0.15 秒/60°6.0V:6.0V:7.0 千克/厘米0.12 秒/60°28.0 g 35.8×19.6×24.9 mm 7.4V:7.4V:7.1 千克/厘米0.11 秒/60°28.0 g 35.8×19.6×24.9 mm 7.4V:7.4V:7.1 千克/厘米0.11 秒/60°21.0 g 36.8×19.6×24.9 mm 7.4V:7.4V:5.0 千克/厘米0.16 秒/60°21.0 g36.8×19.6×24.9 mm7.4V:7.4V:5.0 千克/厘米0.16 秒/60°Futaba BLS151数字无刷双轴承金属Futaba BLS152数字无刷双轴承Futaba BLS153数字无刷Futaba BLS154数字无刷双轴承金属Futaba BLS155数字无刷双轴承金属Futaba BLS251数字无刷双轴承金属Futaba BLS252数字无刷双轴承金属Futaba BLS253数字无刷双轴承Futaba BLS254数字无刷Futaba BLS257数字无刷双轴承金属Futaba BLS351数字无刷双轴承混合Futaba BLS352数字无刷双轴承金属Futaba BLS451数字无刷金属Futaba BLS452数字无刷双轴承金属Futaba BLS551数字无刷Futaba BLS651数字无刷双轴承金属Futaba RS301CR-F1数字空心杯金属Futaba RS301CR-F2数字金属Futaba RS302CD-F1数字金属Futaba RS302CD-F2数字63.0 g39.9×20.1×37.6 mm 6.0V: 6.0V:14.1 千克/厘米0.13 秒/60°47.5 g39.9×20.1×39.1 mm 6.0V: 6.0V:8.9 千克/厘米0.20 秒/60°6.2 g22.9×10.2×20.3 mm 4.8V: 4.8V:1.6 千克/厘米0.10 秒/60°65.2 g39.6×22.4×42.9 mm 4.8V: 6.0V:9.3 千克/厘米0.62 秒/60°4.8V: 4.8V:42.0 g46.0×23.1×24.9 mm 4.3 千克/厘米0.60 秒/60°6.0V: 6.0V:5.5 千克/厘米0.50 秒/60°4.8V: 4.8V:44.4 g39.9×20.1×36.1 mm 2.4 千克/厘米0.28 秒/60°6.0V: 6.0V:3.0 千克/厘米0.22 秒/60°4.8V: 4.8V:45.0 g39.9×20.1×36.1 mm 2.4 千克/厘米0.28 秒/60°6.0V: 6.0V:3.0 千克/厘米0.22 秒/60°4.8V: 4.8V:35.0 g31.0×16.0×30.0 mm 2.7 千克/厘米0.25 秒/60°6.0V: 6.0V:3.3 千克/厘米0.20 秒/60°4.8V: 4.8V:37.0 g39.9×20.1×36.1 mm 3.2 千克/厘米0.23 秒/60°6.0V: 6.0V:4.1 千克/厘米0.19 秒/60°4.8V: 4.8V:37.0 g39.9×20.1×36.1 mm 3.2 千克/厘米0.23 秒/60°6.0V: 6.0V:4.1 千克/厘米0.19 秒/60°4.8V: 4.8V:41.0 g39.9×20.1×38.1 mm 5.2 千克/厘米0.20 秒/60°6.0V: 6.0V:6.5 千克/厘米0.16 秒/60°41.1 g39.9×20.1×38.1 mm 6.0V: 6.0V:6.5 千克/厘米0.16 秒/60°4.8V: 4.8V:49.0 g39.9×20.1×38.1 mm 5.2 千克/厘米0.20 秒/60°6.0V: 6.0V:6.5 千克/厘米0.16 秒/60°Futaba S30514.8V: 4.8V:17.0 g26.7×12.7×28.4 mm 2.5 千克/厘米0.18 秒/60°6.0V: 6.0V:3.1 千克/厘米0.14 秒/60°4.8V: 4.8V:21.0 g27.9×13.0×30.0 mm 3.7 千克/厘米0.25 秒/60°6.0V: 6.0V:4.6 千克/厘米0.20 秒/60°4.8V: 4.8V:9.6 g21.8×10.9×19.8 mm 1.3 千克/厘米0.11 秒/60°6.0V: 6.0V:1.5 千克/厘米0.09 秒/60°4.8V: 4.8V:95.0 g58.9×29.0×50.0 mm9.2 千克/厘米0.21 秒/60°双轴承金属Futaba RS403PR数字空心杯金属Futaba RS404PD数字3-poleFutaba S110M模拟单轴承塑料Futaba S125模拟双轴承塑料Futaba S136G模拟3-pole衬套塑料Futaba S148模拟3-pole单轴承塑料Futaba S3001模拟3-pole双轴承金属Futaba S3002模拟3-pole塑料Futaba S3003模拟双轴承塑料Futaba S3004模拟3-pole单轴承塑料Futaba S3010模拟3-poleFutaba S3014金属Futaba S3050数字Futaba S31015-pole衬套混合Futaba S3102模拟3-pole金属Futaba S31033-pole衬套塑料Futaba S3104模拟3-pole9.6 g21.6×10.9×19.8 mm 1.3 千克/厘米0.11 秒/60°6.0V: 6.0V:1.5 千克/厘米0.09 秒/60°9.0 g22.1×10.9×20.1 mm 4.8V: 4.8V:1.2 千克/厘米0.12 秒/60°7.7 g20.6×11.4×22.1 mm 4.8V: 4.8V:1.2 千克/厘米0.12 秒/60°7.3 g22.9×10.2×20.3 mm 4.8V: 4.8V:1.2 千克/厘米0.12 秒/60°4.8V:0.14 秒/60°6.5 g22.9×10.2×20.3 mm 4.8V: 4.8V:0.5 千克/厘米0.14 秒/60°7.3 g21.8×10.9×19.8 mm 4.8V: 4.8V:1.6 千克/厘米0.10 秒/60°6.3 g22.1×10.9×20.1 mm 4.8V: 4.8V:0.6 千克/厘米0.12 秒/60°4.8V: 4.8V:6.3 g22.1×10.9×20.1 mm0.6 千克/厘米0.12 秒/60°4.8V: 4.8V:9.6 g21.8×10.9×20.3 mm 1.2 千克/厘米0.11 秒/60°6.0V: 6.0V:1.5 千克/厘米0.10 秒/60°4.8V: 4.8V:7.8 g22.1×10.9×20.1 mm 1.5 千克/厘米0.10 秒/60°6.0V: 6.0V:1.7 千克/厘米0.09 秒/60°4.8V: 4.8V:7.8 g22.1×10.9×20.1 mm 1.5 千克/厘米0.10 秒/60°6.0V: 6.0V:1.7 千克/厘米0.09 秒/60°17.0 g27.9×13.0×30.0 mm 4.8V: 4.8V:2.8 千克/厘米0.15 秒/60°4.8V: 4.8V:8.5 g22.1×10.9×23.1 mm 1.5 千克/厘米0.10 秒/60°6.0V: 6.0V:1.7 千克/厘米0.09 秒/60°23.0 g30.0×10.9×29.0 mm 4.8V: 4.8V:3.7 千克/厘米0.24 秒/60°4.8V: 4.8V:42.0 g40.9×20.1×36.1 mm 3.1 千克/厘米0.21 秒/60°6.0V: 6.0V:3.9 千克/厘米0.17 秒/60°4.8V: 4.8V:41.0 g39.9×20.1×38.1 mm 5.0 千克/厘米0.22 秒/60°6.0V: 6.0V:6.3 千克/厘米0.18 秒/60°4.8V: 4.8V:9.6 g22.1×10.9×20.1 mm 1.4 千克/厘米0.11 秒/60°6.0V: 6.0V:1.7 千克/厘米0.09 秒/60°4.8V: 4.8V:9.6 g22.1×10.9×20.1 mm 1.4 千克/厘米0.13 秒/60°6.0V: 6.0V:1.7 千克/厘米0.11 秒/60°4.8V: 4.8V:7.9 g22.1×10.9×20.1 mm 1.5 千克/厘米0.10 秒/60°6.0V: 6.0V:1.7 千克/厘米0.09 秒/60°塑料Futaba S31063-pole塑料Futaba S3107模拟3-poleFutaba S3108Futaba S3108M3-poleFutaba S3109Futaba S3109MFutaba S3110模拟塑料Futaba S3111模拟塑料Futaba S3111M模拟塑料Futaba S3113模拟衬套塑料Futaba S3114模拟3-pole衬套塑料Futaba S3114M模拟3-pole塑料Futaba S3115模拟塑料Futaba S3117模拟双轴承金属Futaba S3150数字空心杯单轴承塑料Futaba S3151数字3-pole单轴承塑料Futaba S3152数字空心杯塑料Futaba S3153数字金属Futaba S3153MG数字塑料Futaba S3154数字20.0 g30.0×10.9×29.0 mm 2.0 千克/厘米0.16 秒/60°6.0V:0.13 秒/60°4.8V: 4.8V:9.3 g22.1×10.9×22.1 mm 2.0 千克/厘米0.13 秒/60°6.0V: 6.0V:2.4 千克/厘米0.11 秒/60°4.8V: 4.8V:8.3 g22.1×10.9×23.1 mm 1.5 千克/厘米0.10 秒/60°6.0V: 6.0V:1.7 千克/厘米0.09 秒/60°4.8V: 4.8V:7.8 g22.1×10.9×23.1 mm 1.5 千克/厘米0.10 秒/60°6.0V: 6.0V:1.7 千克/厘米0.09 秒/60°4.8V: 4.8V:26.0 g35.1×16.0×25.9 mm 6.8 千克/厘米0.57 秒/60°6.0V: 6.0V:8.5 千克/厘米0.47 秒/60°4.8V: 4.8V:103.0 g58.9×29.0×50.0 mm 6.4 千克/厘米0.24 秒/60°6.0V: 6.0V:8.0 千克/厘米0.19 秒/60°4.8V: 4.8V:19.9 g30.0×9.9×29.0 mm 2.2 千克/厘米0.15 秒/60°4.8V: 4.8V:47.0 g39.9×20.1×38.1 mm7.1 千克/厘米0.25 秒/60°6.0V: 6.0V:8.9 千克/厘米0.20 秒/60°4.8V: 4.8V:126.0 g66.0×30.0×56.9 mm19.2 千克/厘米0.20 秒/60°6.0V: 6.0V:24.0 千克/厘米0.16 秒/60°4.8V: 4.8V:47.1 g40.6×20.1×37.3 mm 2.6 千克/厘米0.19 秒/60°6.0V: 6.0V:3.2 千克/厘米0.15 秒/60°4.8V: 4.8V:107.0 g58.9×29.0×50.0 mm11.2 千克/厘米0.30 秒/60°6.0V: 6.0V:14.0 千克/厘米0.26 秒/60°4.8V: 4.8V:72.0 g43.9×23.1×42.9 mm8.8 千克/厘米0.70 秒/60°6.0V: 6.0V:11.0 千克/厘米0.56 秒/60°4.8V: 4.8V:127.0 g58.9×29.0×50.0 mm15.2 千克/厘米0.25 秒/60°6.0V: 6.0V:19.0 千克/厘米0.20 秒/60°4.8V: 4.8V:125.0 g58.9×29.0×50.0 mm16.8 千克/厘米0.29 秒/60°6.0V: 6.0V:21.0 千克/厘米0.23 秒/60°4.8V: 4.8V:125.0 g58.9×29.0×50.0 mm13.6 千克/厘米0.19 秒/60°6.0V: 6.0V:17.0 千克/厘米0.15 秒/60°金属Futaba S3155数字金属Futaba S3156MG数字Futaba S3157数字Futaba S3157M数字双轴承金属Futaba S3170G数字双轴承混合Futaba S3302模拟3-poleFutaba S3303数字双轴承金属Futaba S3305模拟3-pole双轴承塑料Futaba S3306模拟3-pole金属Futaba S34015-pole双轴承混合Futaba S3801模拟3-pole双轴承混合Futaba S3802模拟3-pole双轴承金属Futaba S5050数字5-pole双轴承金属Futaba S5301模拟5-pole双轴承金属Futaba S5302模拟5-pole83.0 g46.0×24.9×43.9 mm7.8 千克/厘米0.10 秒/60°7.2V:7.2V:9.8 千克/厘米0.08 秒/60°4.8V: 4.8V:48.0 g39.9×20.1×36.1 mm 3.9 千克/厘米0.22 秒/60°6.0V: 6.0V:5.2 千克/厘米0.18 秒/60°4.8V: 4.8V:31.0 g31.0×16.0×31.0 mm 2.5 千克/厘米0.18 秒/60°6.0V: 6.0V:3.1 千克/厘米0.14 秒/60°4.8V: 4.8V:32.0 g35.8×19.6×24.9 mm 4.5 千克/厘米0.18 秒/60°6.0V: 6.0V:5.5 千克/厘米0.15 秒/60°7.2V:7.2V:6.8 千克/厘米0.12 秒/60°4.8V: 4.8V:42.5 g38.6×20.3×34.5 mm 2.5 千克/厘米0.20 秒/60°6.0V: 6.0V:3.1 千克/厘米0.16 秒/60°4.8V: 4.8V:48.0 g39.9×20.1×36.1 mm 2.9 千克/厘米0.16 秒/60°6.0V: 6.0V:3.6 千克/厘米0.13 秒/60°53.0 g48.0×26.9×24.9 mm 4.8V: 4.8V:5.8 千克/厘米0.18 秒/60°50.0 g39.9×20.1×37.1 mm 4.8V: 4.8V:9.5 千克/厘米0.19 秒/60°4.8V: 4.8V:85.0 g49.0×24.9×39.9 mm16.0 千克/厘米0.23 秒/60°6.0V: 6.0V:20.0 千克/厘米0.19 秒/60°4.8V: 4.8V:85.0 g49.0×24.9×39.9 mm12.0 千克/厘米0.19 秒/60°6.0V: 6.0V:15.0 千克/厘米0.15 秒/60°53.0 g48.0×26.9×24.9 mm 4.8V: 4.8V:4.6 千克/厘米0.14 秒/60°4.8V: 4.8V:61.0 g39.9×20.1×37.1 mm11.0 千克/厘米0.16 秒/60°6.0V: 6.0V:13.8 千克/厘米0.13 秒/60°4.8V: 4.8V:63.0 g39.9×20.1×37.1 mm19.6 千克/厘米0.21 秒/60°6.0V: 6.0V:24.5 千克/厘米0.17 秒/60°71.0 g40.9×21.1×37.1 mm 6.0V: 6.0V:30.6 千克/厘米0.14 秒/60°48.2 g40.4×20.1×35.6 mm 6.0V: 6.0V:5.0 千克/厘米0.22 秒/60°4.8V: 4.8V:53.0 g40.9×20.1×38.1 mm 4.0 千克/厘米0.27 秒/60°6.0V: 6.0V:5.0 千克/厘米0.22 秒/60°53.9 g40.4×20.1×37.6 mm 4.8V: 4.8V:5.5 千克/厘米0.11 秒/60°53.9 g40.4×20.1×37.6 mm 4.8V: 4.8V:9.5 千克/厘米0.19 秒/60°双轴承金属Futaba S5801模拟5-pole单轴承塑料Futaba S9001模拟空心杯双轴承混合Futaba S9002模拟空心杯双轴承金属Futaba S9070数字无刷Futaba S9101空心杯双轴承塑料Futaba S9102模拟空心杯双轴承塑料Futaba S9150数字空心杯双轴承塑料Futaba S9151数字空心杯双轴承金属Futaba S9152数字空心杯双轴承金属Futaba S9153数字空心杯塑料Futaba S9154数字空心杯金属Futaba S9155数字空心杯双轴承金属Futaba S9156数字空心杯双轴承金属Futaba S9157数字空心杯Futaba S9201模拟双轴承塑料Futaba S9202模拟空心杯双轴承Futaba S9203模拟空心杯双轴承金属Futaba S9204模拟空心杯53.9 g40.4×20.1×37.6 mm 4.8V: 4.8V:5.5 千克/厘米0.11 秒/60°53.0 g40.9×20.1×38.1 mm 4.8V: 4.8V:9.5 千克/厘米0.19 秒/60°54.0 g40.9×20.1×38.1 mm 4.8V: 4.8V:5.5 千克/厘米0.11 秒/60°57.0 g39.9×20.1×37.1 mm 4.8V: 4.8V:3.7 千克/厘米0.07 秒/60°50.0 g39.9×20.1×37.1 mm4.8V: 4.8V:6.6 千克/厘米0.14 秒/60°49.3 g38.1×19.1×35.6 mm 4.8V: 4.8V:2.0 千克/厘米0.08 秒/60°49.0 g39.9×20.1×37.1 mm 4.8V: 4.8V:3.4 千克/厘米0.06 秒/60°55.0 g39.9×20.1×37.1 mm4.8V: 4.8V:9.0 千克/厘米0.16 秒/60°4.8V: 4.8V:57.0 g39.9×20.1×37.1 mm 3.4 千克/厘米0.06 秒/60°26.0 g36.1×15.0×29.0 mm 4.8V: 4.8V:2.0 千克/厘米0.08 秒/60°65.2 g40.4×20.1×39.4 mm 4.8V: 4.8V:7.1 千克/厘米0.19 秒/60°51.0 g40.4×20.1×35.6 mm 4.8V: 4.8V:4.1 千克/厘米0.28 秒/60°6.0V: 6.0V:5.0 千克/厘米0.22 秒/60°61.0 g39.9×20.1×37.1 mm 4.8V: 4.8V:8.0 千克/厘米0.15 秒/60°6.0V: 6.0V:10.0 千克/厘米0.12 秒/60°4.8V: 4.8V:61.0 g39.9×20.1×37.1 mm11.0 千克/厘米0.16 秒/60°6.0V: 6.0V:13.8 千克/厘米0.13 秒/60°4.8V: 4.8V:55.0 g40.9×20.1×38.1 mm 6.4 千克/厘米0.12 秒/60°6.0V: 6.0V:8.0 千克/厘米0.10 秒/60°48.2 g40.4×20.1×35.6 mm 4.8V: 4.8V:3.2 千克/厘米0.16 秒/60°55.0 g39.1×20.1×37.3 mm4.8V: 4.8V:5.7 千克/厘米0.11 秒/60°4.8V: 4.8V:55.0 g40.9×20.1×38.1 mm 5.8 千克/厘米0.13 秒/60°6.0V: 6.0V:7.2 千克/厘米0.11 秒/60°4.8V: 4.8V:55.0 g40.4×20.1×37.6 mm 6.4 千克/厘米0.10 秒/60°6.0V: 6.0V:8.0 千克/厘米0.08 秒/60°4.8V: 4.8V:56.0 g40.0×20.0×36.0 mm7.0 千克/厘米0.13 秒/60°6.0V: 6.0V:8.0 千克/厘米0.10 秒/60°4.8V: 4.8V:50.0 g39.9×20.1×34.0 mm7.3 千克/厘米0.13 秒/60°6.0V: 6.0V:9.2 千克/厘米0.11 秒/60°金属Futaba S9205双轴承金属Futaba S9206模拟空心杯双轴承金属Futaba S9250数字空心杯双轴承金属Futaba S9251数字空心杯双轴承塑料Futaba S9252数字空心杯双轴承塑料Futaba S9253数字空心杯双轴承塑料Futaba S9254数字空心杯单轴承金属Futaba S9255数字空心杯塑料Futaba S9256数字双轴承塑料Futaba S9257数字空心杯金属Futaba S9303模拟空心杯Futaba S9304空心杯双轴承金属Futaba S9350数字空心杯金属Futaba S9351数字空心杯双轴承金属Futaba S9402模拟空心杯Futaba S9403空心杯金属Futaba S9404空心杯双轴承金属Futaba S9405模拟空心杯金属Futaba S9450空心杯双轴承金属Futaba S9451数字空心杯双轴承金属Futaba S9452数字空心杯4.8V: 4.8V:43.9 g40.4×20.8×25.4 mm 4.8 千克/厘米0.11 秒/60°6.0V: 6.0V:6.0 千克/厘米0.09 秒/60°4.8V: 4.8V:45.0 g40.9×20.1×24.9 mm7.1 千克/厘米0.14 秒/60°6.0V: 6.0V:8.8 千克/厘米0.11 秒/60°4.8V: 4.8V:31.0 g36.1×15.0×31.0 mm 2.2 千克/厘米0.11 秒/60°6.0V: 6.0V:2.7 千克/厘米0.09 秒/60°4.8V: 4.8V:26.0 g36.1×15.0×29.0 mm 3.6 千克/厘米0.14 秒/60°6.0V: 6.0V:4.5 千克/厘米0.11 秒/60°金属Futaba S9550空心杯双轴承金属Futaba S9551数字空心杯双轴承金属Futaba S9602模拟空心杯双轴承塑料Futaba S9650数字空心杯。
物料共用替换表-附件
13
闪光灯
优先等级 E A B C
备注
雷以银 09.04.06
HT-310FCH SP1204A-3C 12-23C/R6GHBHC-AO1/2C
9
侧光七彩灯
AOT-1204-3D-RGB03-HO具 SSC-THBTGFR5210 LH-1204FP3-RGB2-C11-01-L
10
11
ZTE侧发光白灯 ZTE侧发光白灯 ZTE侧发光白灯 ZTE侧发光白灯 ZTE中兴用白灯 ZTE中兴用白灯
半导体替代一览表
序号
名称 正发光蓝灯 正发光蓝灯 正发光蓝灯 正发光蓝灯 正发光蓝灯 正发光蓝灯 正发光蓝灯 正发光蓝灯 正发光白灯 正发光白灯 正发光白灯 正发光白灯 正发光白灯 正发光白灯 正发光红灯 正发光红灯 正发光红灯 正发光红灯 正发光红灯 正发光红灯 正发光黄灯 正发光黄灯 正发光黄灯 正发光黄灯 正发光黄灯 正发光黄灯 正发光黄绿灯 正发光黄绿灯 正发光黄绿灯 正发光黄绿灯 正发光橙红灯 正发光橙红灯 正发光橙红灯 正发光橙红灯 纯绿色LED 纯绿色LED 纯绿色LED 纯绿色LED 纯绿色LED 型号 SP0603B-BN LTST-C193TBKT-5A BL--HB336G-TRB AOT--0603--B110--HO（H) 19-217/BHC-ZL1M2RY/3T BL--HB536G-TRB HT--193NB5 LH-06034P1-B2-A01（02）-01 SP0603B-WW BL--HZ336G-L8-TRB GT-197 AOT--0603--W310--HO（H) LTW-C193TS5 RF-WUM190DS-DC SP0603B-RN BL-HJE36G-AV-TRB(红） AOT-0603P-R01-HO LIST-C193KRKT-5A BL-－HUB36G-TRB SSC-FR104-II1 SP0603B-YN 黄灯 BL-HKC36G-TRB A0T-0603P-Y01-HO LTST-C193KSKT-5A HT-F195UY5 SSC-FB102 SP0603B-YG BL-HGE36-AV-TRB LTST-C193KGKT-5A AOT--0603YG01--H0 SP0603B-ON LTST-C193KFKT-5A A0T-0603P-A01-HO BL-HJC36G-AV-TRB SP0603B-GN BL-HGK36A-AV-TRB AOT--0603P--G01--HO
BL-HGE36G-AV-TRB(5mA)佰鸿一级代理推荐资料
● DEVICE NUMBER：BL-HGE36G-AV-TRB(5mA)2.Backlighting : LCDs, Key pads advertising.3.Status indicators : Comsumer & industrialelectronics.4.General use.● Absolute Maximum Ratings(Ta=25℃)Parameter Symbol Rating UnitPower Dissipation Pd 12 mWForward Current I F 5 mA Peak Forward Current ＊1I FP 100 mA Reverse Volage V R 5 V Operating Temperature Topr -40℃~85℃-Storage Temperature Tstg -40℃~85℃-Soldering Temperature Tsol See Page 6 -NOTE: 4000 pcs PER REEL●Package Method:(unit:mm) Vacuum12 bag/boxColor Bin Limits (At 5mA)BIN CODE Min. (nm) Max. (nm)45665685568570657057275725748574576Tolerance for each Bin limit is ± 1nm.V F Bin Limits (At 5mA)BIN CODE Min.(v) Max.(v)A1 1.6 1.7A2 1.7 1.8B1 1.8 1.9B2 1.9 2.0C1 2.0 2.1C2 2.1 2.2D1 2.2 2.3D2 2.3 2.4 Tolerance for each Bin limit is ±0.05V.●BIN：x x xC o l o r B I N C OD EI n t e n s i t y B I N C O D E●Judgment criteria of failure for the reliabilityMeasuring items Symbol Measuring conditions Judgement criteria for failureLevel*1.1 Forward voltage V F ( V) I F=5mA InitialU*2 Reverse current I R(uA) V R=5V OverLevel*0.7 Luminous intensity Iv ( mcd ) I F=5mA InitialNote: 1.U means the upper limit of specified characteristics.2.Measurment shall be taken between 2 hours and after the test pieces have been returned tonormal ambient conditions after completion of each test.seconds per solder-land is to be observed. 2. Reflow Soldering Preheating : 140℃~160℃±5℃,within 2 minutes. 3. Preheating : 120℃~150℃,within 120~180 sec.Operation heating : 245℃±5℃ within 5 sec.260℃ (Max)Gradual Cooling (Avoid quenching). ● Handling : Care must be taken not to cause to the epoxy resin portion of BRIGHT LEDs while it is exposed to high temperature. Care must be taken not rub the epoxy resin portion of BRIGHT LEDs with hard or sharp article suchas the sand blast and the metal hook .Timeinstantaneous voltage at the turning ON and OFF of the circuit.When using the pulse drive care must be taken to keep the average current within the rated figures.Also, the circuit should be designed so as be subjected to reverse voltage when turning off the BRIGHT LEDs.●Storage:In order to avoid the absorption of moisture, it is recommended to solder BRIGHT LEDs as soon as possible after unpacking the sealed envelope.If the envelope is still packed, to store it in the environment as following:(1) Temperature : 5℃-30℃(41℉)Humidity : RH 60﹪Max.(2) After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, orequivalent soldering process must be:a. Completed within 168 hours.b. Stored at less than 30% RH.(3) Devices require baking before mounting, if:(2) a or (2) b is not met.(4) If baking is required, devices must be baked under below conditions:48 hours at 60℃±3℃.●Package and Label of Products:(1) Package: Products are packed in one bag of 4000 pcs (one taping reel) and a label is attachedon each bag.(2) Label:BRIGHT LED LOGOBPart No.QuantityBIN.Sealing Datexx xx xxYear Month DayManufacture Location。
电子厂物料号编码规则
4.14.1-040石英晶体振荡器(振荡器、谐振器、FILTER)
1-040ABCDEF—GHI
A代表类型0＝振荡器、1＝谐振器、2＝滤波器；
BCDEF代表晶振的频率值，BCDE表示频率数字前4位(有效数字)，E采用科学计数法表示10的乘方，最小基准单位为“Hz”
例如：频率为32.768KHZ的振荡器，两脚，金属标准封装，第一个供应商，初次申请，其P\N为：1.0313.032762-00A
BCDEEF代表稳压值；
G代表封装：0＝1206贴片封装，1＝0805贴片封装；2=0603贴片封装,3＝插件,4=其它封装(在描述中注明)；
H代表版本序列号；I代表厂商：以英文字母顺沿，第一个供应商用“A”表示，以下雷同,(当I=M时,代表AI,为编带装)
描述
格式:
第一部分
第二部分
第三部分
第四部分
4×5.5
5×5.5
6.3×5.5
4×5
4×7
5×5
5×7
5×11
6.3×5
6.3×7
6.3×12
8×5
8×7
8×12
10×12
10×16
10×20
12.5×20
12.5×25
16×25
10×30
如：电解电容220uFM 16V105℃6.3×7mm袋装 格力新元
4.8.1-050小容量贴片电容系列
制造商
确认书编号
是否为零件
是否为通用件
是否为外购件
如：石英晶体振荡器27MHz 10.5pF 10ppm85℃HC-49U/S华联兴
4.15.1-110PCB板
1-110ABCDEF—GHI
ABCDE代表机型,F代表方案序列号；
TSB82AA2中文资料
元器件交易网
Contents
Section 1 Title Page 1−1 1−1 1−2 1−3 1−3 1−3 1−3 2−1 3−1 3−3 3−4 3−4 3−5 3−6 3−7 3−7 3−8 3−8 3−9 3−10 3−11 3−12 3−12 3−13 3−13 3−14 3−14 3−15 3−16 3−16 3−17 3−18 3−19 3−21 3−22 4−1 4−4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 TSB82AA2 Data Manual Document History . . . . . . . . . . . . . . . . . . . . . Terminal Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TSB82AA2 Controller Programming Model . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 PCI Configuration Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Vendor ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Device ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Command Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Class Code and Revision ID Register . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7 Latency Timer and Class Cache Line Size Register . . . . . . . . . . . . . . 3.8 Header Type and BIST Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9 OHCI Base Address Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.10 TI Extension Base Address Register . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.11 CardBus Cis Base Address Register . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.12 CardBus CIS Pointer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.13 Subsystem Identification Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.14 Power Management Capabilities Pointer Register . . . . . . . . . . . . . . . 3.15 Interrupt Line and Pin Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16 MIN_GNT and MAX_LAT Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.17 OHCI Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.18 Capability ID and Next Item Pointer Register . . . . . . . . . . . . . . . . . . . . 3.19 Power Management Capabilities Register . . . . . . . . . . . . . . . . . . . . . . 3.20 Power Management Control and Status Register . . . . . . . . . . . . . . . . 3.21 Power Management Extension Register . . . . . . . . . . . . . . . . . . . . . . . . 3.22 Multifunction Select Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.23 Miscellaneous Configuration Register . . . . . . . . . . . . . . . . . . . . . . . . . . 3.24 Link Enhancement Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.25 Subsystem Access Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.26 GPIO Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OHCI Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 OHCI Version Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BL-HUF34C-AV-TRB佰鸿一级代理推荐资料
●DEVICE NUMBER：BL-HUF34C-AV-TRBelectronics.4.General use.● Absolute Maximum Ratings(Ta=25℃)Parameter Symbol Rating UnitPower Dissipation Pd 80 mWForward Current I F 30 mA Peak Forward Current ＊1I FP 100 mA Reverse Volage V R 5 V Operating Temperature Topr -25℃~80℃-Storage Temperature Tstg -30℃~85℃-Soldering Temperature Tsol See Page 6 -＊1 Condition for I FP is pulse of 1/10 duty and 0.1msec width.● Typical Electro-Optical Characteristics CurvesR e l a t i v e l u m i n o u s i n t e n s i t y (@20m A )F o r w a r d c u r r e n t (m A )1020304050Fig.1 Relative intensity vs. wavelengthR e l a t i v e r a d i a n t i n t e n s i t yFig.2 Forward current derating curveIntensity Bin Limits (At 20mA)BIN CODE Min. (mcd) Max. (mcd)L18.528.0M28.042.0N42.063.0P63.094.0 Tolerance for each Bin limit is ± 15 %.Color Bin Limits (At 20mA)BIN CODE Min. (nm) Max. (nm)*627637 Tolerance for each Bin limit is ± 1 nmV F Bin Limits (At 20mA)BIN CODE Min.(v) Max.(v)B 1.8 2.0C 2.0 2.2D 2.2 2.4E 2.4 2.6Tolerance for each Bin limit is ± 0.05 V●BIN：x x xV F B I N C O D EC o l o r B I N C OD EI n t e n s i t y B I N C O D E●Judgment criteria of failure for the reliabilityMeasuring items Symbol Measuring conditions Judgement criteria for failureUx1.2 Forward voltage V F ( V) I F=20mA OverUx2 Reverse current I R(uA) V R=5V OverSX0.5 Luminous intensity Iv ( mcd ) I F=20mA Below Note: 1.U means the upper limit of specified characteristics. S means initial value.2.Measurment shall be taken between 2 hours and after the test pieces have been returned tonormal ambient conditions after completion of each test.The temperature of the iron tip should not be higher than 300℃(572℉) and Soldering within 3 seconds per solder-land is to be observed. 2. Reflow SolderingPreheating : 140℃~160℃±5℃,within 2 minutes.3. Preheating : 120℃~150℃,within 120~180 sec.Operation heating : 245℃±5℃ within 5 sec.260℃ (Max) Gradual Cooling (Avoid quenching).● Handling :Care must be taken not to cause to the epoxy resin portion of BRIGHT LEDs while it is exposed to high temperature.Care must be taken not rub the epoxy resin portion of BRIGHT LEDs with hard or sharp article such as the sand blast and the metal hook . TimeLEDs within the rated figures. Also, caution should be taken not to overload BRIGHT LEDs with instantaneous voltage at the turning ON and OFF of the circuit.When using the pulse drive care must be taken to keep the average current within the rated figures.Also, the circuit should be designed so as be subjected to reverse voltage when turning off the BRIGHT LEDs.●Storage:In order to avoid the absorption of moisture, it is recommended to solder BRIGHT LEDs as soon as possible after unpacking the sealed envelope.If the envelope is still packed, to store it in the environment as following:(1) Temperature : 5℃-30℃(41℉)Humidity : RH 60﹪Max.(2) After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, orequivalent soldering process must be:a. Completed within 24 hours.b. Stored at less than 30% RH.(3) Devices require baking before mounting, if:(2) a or (2) b is not met.(4) If baking is required, devices must be baked under below conditions:12 hours at 60℃±3℃.●Package and Label of Products:(1) Package: Products are packed in one bag of 3000 pcs (one taping reel) and a label is attachedon each bag.(2) Label:BRIGHT LED LOGOPart No.QuantityBIN.Sealing Datexx xx xxYear Month DayManufacture Location。
HQxxxx-xxx-3AA中文资料
HQ SeriesSPECIFICATIONS STANDARD*SPECIAL ELECTRICALCenter Frequency (Fc)100 to 1000 Mhz80 to 1400 MHz 3dB Relative Bandwidth (% of FC) 4 to 40 4 to 50 Number of Sections Available 3 to 8 2 to 10 Nominal Impedance50 Ohms50 to 75 Ohms Maximum Insertion Loss See Curve See Curve Maximum VSWR 1.5/1 1.3/1 Attenuation in the Stopband See Graph See GraphMaximum Input Power (Average)(Watts to10,000 ft.)500 x 3dB BW (MHz)(Loss Factor)(Fc MHz)See StandardMaximum Input Power (Peak)(Watts to10,000 ft.)300 x 3dB BW (MHz)Fc (MHz)2,000ENVIRONMENTALShock15 G's25 G's Vibration 5 G's10 G's Humidity90% relative100% relativeINSERTION LOSS:The Maximum Insertion Loss at center frequency is equal to :LF x (N + 0.5) / % 3 dB BW + 0.2 Where:LF= Loss Factor, N= Number of Sections% 3dB BW:3dB BW (MHz) x 100divided byCenter Frequency (MHz) Example:A 3 section HQ with a center frequency of 400 MHz and a 3dB BW of 40 MHz would have,1.5 x 3.5 / 10 = 5.25 / 10 = 0.525 0.525 + 0.2 = 0.8 dBConnectors Available on HQ Series:Lark Code Type C DIM.Inches & MMLarkCodeType C DIM.Inches & MMA SMA JACK.800 & 20.3G N JACK 1.625 & 41.3B SMA PLUG.855 & 22.5H N PLUG 1.585 & 40.3C TNC JACK 1.350 & 34.3L SOLDER MPINAXIAL.625 & 15.9D TNC PLUG 1.280 & 32.5*M SOLDER PINRADIAL.625 & 15.9E BNC JACK 1.350 & 34.3S SPECIALF BNC PLUG 1.280 & 32.5*Not recommended for use with this series.LENGTH:The approximate length of a Lark HQ series filter can be determined by the formula:( 0.5 N + 2 / %BW ) x LC = LWhere N is the number of sections used, % BW is:3dB BW (MHz) x 100divided byCENTER FREQUENCY (MHz)LC is the length constant at the specified center frequency, L is the dimension between theconnectors; C1 and C2 are the connector lengths as shown above. All of the length information given here is approximate. Exact length specifications must be quoted by the factory. If a special length is needed,please submit all of your requirements - both electrical and mechanical. This will enable Lark Engineering to quote the optimum design for your application.Example:A 3 section HQ with a center frequency of 400 MHz a 3dB BW of 40 MHz and SMA jack input and output connectors would be:(1.5 + 0.2) x 1.38 = 2.35 + C1 + C2In most cases, the L dimension is rounded to the nearest 1/4 inch which in this instance would be 2.25inches and the O.A.L. is:2.25 + .800 + .800 =3.85 inches.To convert inches to millimeters multiply x 25.40.Lark Engineering HQ SERIES元器件交易网STOPBAND ATTENUATIONThe graph on the following pages defines the normal specification limits on attenuation Lark bandpass filter series HP, HQ, SF, and SM. The minimum level of attenuation in dB is shown as a "number of 3dB bandwidths from center frequency".Since the frequency characteristics vary for differing bandwidths, it is necessary to establishspecifications for each bandwidth of filter. The different graphs represent various 3dB percentage bandwidths. Intermediate values should be interpolated. The 3dB percentage bandwidth is defined asfollows:STOPATT5.HTM元器件交易网As the 3dB bandwidth is exactly 10% of the center frequency, the answer can be read directly from the 10% graph. Using the 5 section curve at the point -1.5 (255 MHz) we find the minimum level of attenuation is 36dB. At +1.6 (348 MHz) the minimum level of attenuation is 48dB.For special requirements, please contact our Application Engineering Department.STOPBAND ATTENUATIONSTOPBAND ATTENUATIONSTOPATT5.HTM元器件交易网STOPBAND ATTENUATIONSTOPBAND ATTENUATIONSTOPBAND ATTENUATION。
Bluetooth Keyboard BKB50用户指南说明书
User guide Bluetooth® KeyboardContents Basics (3)General overview (3)Keyboard overview (3)Charging the keyboard (4)Turning on and off (5)Getting started (6)Setting up the keyboard (6)Assembly (6)Using your Bluetooth® Keyboard (8)Tablet settings for Danish and Norwegian users (8)PC style keyboard launcher application (8)Overview of PC style keyboard launcher (8)Using the touchpad (9)Sleep mode (11)Resetting the keyboard (11)Support on the web (11)Legal information (12)Declaration of Conformity (13)BasicsGeneral overviewThe BKB50Bluetooth® Keyboard helps you use your Xperia™ Z4 Tablet like a PC and is convenient when you are on the move. You can pair the Bluetooth®Keyboard easily with the tablet using the NFC function. Once it’s set up and attached to your tablet, the Bluetooth® Keyboard can detect when your tablet is closed and can switch off, if necessary, to save power.Keyboard overview1Groove for tablet2Charging port3Notification light4Pair key5Power switch6TouchpadKeypad controlsKey symbol Key combination FunctionFn + F1Decrease the brightness.Fn + F2Increase the brightness.Fn + F3Decrease the volume.Fn + F4Increase the volume.Fn + F5Go to the previous audio or video file.Fn + F6Play or pause the current audio or video file.Fn + F7Go to the next audio or video file.Fn + F8Turn on the USB detection function to detect connected USBdevices.Fn + F9CutFn + F10CopyFn + F11PasteFn + F12SearchOpen the Notification panel.Print the screen.Turn the screen on or off.The list above only shows combination key controls and a few other commonly used keys.Other keys that are not listed above function in the same way as on most keyboards.Notification light statusFlashing blue The keyboard is in pairing mode – the keyboard is available for pairing with other devices.White The keyboard is in active mode.Flashing white The keyboard is in sleep mode.Green The battery is charging and the battery charge level is greater than 90%.Amber The battery is charging and the battery charge level is between 15% and 90%.Red The battery is charging and the battery charge level is less than 15%. Charging the keyboardTo charge the keyboardCharge the keyboard for four hours before using it for the first time. Use a regular charger only.1Plug the charger for your Android phone or tablet into a power outlet.2Plug one end of the USB cable into the charger.3Plug the other end of the USB cable into the charging port on your keyboard.A micro USB cable and charger are not included at purchase.Turning on and offTo turn the keyboard on or off•Slide the power switch downwards and then release it.Getting startedSetting up the keyboardThe BKB50Bluetooth® Keyboard uses Bluetooth® technology to communicate with your tablet. To establish a Bluetooth® connection between the two devices, you can either use automatic NFC-assisted pairing or you can pair the devicesmanually.To automatically pair the keyboard with the tablet using NFC1Tablet: Make sure that the NFC function is turned on and that the screen is active and unlocked.2Place the tablet over the NFC detection area of your keyboard so that the NFC detection area of each device touches the other. The devices shouldnow connect to each other automatically.To manually pair the keyboard with the tablet using Bluetooth®1Keyboard: Turn on the keyboard. The keyboard enters pairing mode automatically and the notification light flashes blue.2Tablet: Turn on the Bluetooth® function, then search for and tap BKB50.If the notification light stops flashing blue before you get time to pair your tablet with the keyboard, press the pair key until the notification light flashes blue and then try again.AssemblyTo insert the tablet1Insert the bottom edges of the tablet firmly into the grooves of the keyboard.2Adjust the angle of the tablet so that it’s positioned suitably.Using your Bluetooth® KeyboardTablet settings for Danish and Norwegian usersFor Nordic keyboard users, the default keyboard layout on your tablet is Swedish and Finnish. Danish and Norwegian users can switch the keyboard layout to their respective languages via the Keyboard Layout settings on the tablet.To switch the keyboard layout to Danish or Norwegian1From your Home screen, tap .2Find and tap Settings > Language & input > BKB50 > SET UP KEYBOARD LAYOUTS.3Select Norwegian or Danish.4Go back to the previous screen or the Home screen.PC style keyboard launcher applicationA keyboard launcher application opens when the keyboard and tablet are pairedand connected. This application helps you to:•Launch applications•Modify shortcuts•View and adjust keyboard settings•Update the keyboard firmwareOverview of PC style keyboard launcher1Edit shortcuts.2Follow the on-screen instructions to adjust settings or update the keyboard firmware.3Launch a recently used application or a small app.4Tap a shortcut to launch frequently used applications.When the keyboard and tablet are paired and connected, a dialogue box opens if anupdate is available. If you select No in the dialogue box, you can manually update the keyboard later from the Settings menu.To create and delete application shortcuts1Make sure the keyboard and the tablet are both turned on and paired.2Tap .3Tap .4To add an application shortcut, drag and drop the application from the Applications list on the right of the screen to the Shortcut list on the left.5To delete an application shortcut, drag the application from the Shortcut list to at the bottom of the screen.6Tap SAVE.Using the touchpadTo use the pointer1Slide one finger on the touchpad until you locate the pointer on the screen, then move it to the desired position.2Press the left button zone or right button zone to execute commands or display menus.To scroll the screen•Slide two fingers on the touchpad until a circular pointer appears, then slide left or right, or up and down, to scroll the tablet screen.Sliding left or right on the touchpad is equivalent to flicking left or right onthe tablet screen.Motion On-screen actionSlide across Flick page by page.Slide up or down Scroll page by page.To click1Move one finger on the active zone to locate the pointer.2Move the pointer to the desired item or object, then press the left button zone once or tap the active zone briefly with one finger.To right click1Move one finger on the active zone to locate the pointer.2Move the pointer to the desired item or object, then press the right button zone once.To drag and drop1Move one finger on the active zone to locate the pointer, then move it over the item that you want to select.2Long press the left button zone.3Using another finger, drag and drop the selected item to the desired position.To pinch in or out1Press and hold the active zone using two fingers until a circular pointer appears, then move it to the desired position on the tablet screen.2Using two fingers, pinch to zoom in or out.Sleep modeWhen connected, the keyboard goes into sleep mode to save power if it is inactive for five minutes.To wake up the keyboard from sleep mode•Press any key or slide the power switch briefly downwards.Resetting the keyboardYou can perform a hardware reset on your Bluetooth® Keyboard if it behavesunexpectedly. All information about paired devices gets deleted when you performa reset.To perform a hardware reset•Press and hold down the pair key and, at the same time, slide the power switch downwards and keep it in the down position for 3 seconds.Support on the webVisit /support to access a range of support options for your device, including downloads, troubleshooting tips and a User guide.Legal informationSony BKB50Prior to use, please read the Important information leaflet separately provided.This User guide is published by Sony Mobile Communications Inc. or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications Inc. at any time and without notice. Such changes will, however, be incorporated into new editions of this User guide.All rights reserved.©2015 Sony Mobile Communications Inc.Interoperability and compatibility among Bluetooth® devices varies. Device generally supports products utilizing Bluetooth spec. 1.2 or higher, and Headset or Handsfree profile.Sony is the trademark or registered trademark of Sony Corporation. Bluetooth is the trademark of the Bluetooth (SIG) Inc. and is used under license. All other marks are the property of their respective owners. All rights reserved.All product and company names mentioned herein are the trademarks or registered trademarks of their respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of their respective owners.Visit for more information.All illustrations are for illustration only and may not accurately depict the actual accessory.Declaration of ConformityWe, Sony Mobile Communications Inc ofNya VattentornetSE-221 88 Lund, Swedendeclare under our sole responsibility that our productSony type RD-0101to which this declaration relates is in conformity with the appropriate standards Spectrum EMC SafetyEN 300 328:V1.8.1EN 301 489-3:V1.6.1EN 60950-1:2006+A11:2009+A1:2010+A12:2010+A2:2013EN 302 291-2:V1.1.1EN 301 489-7:V1.3.1EN 301 489-17:V2.2.1following the provisions of, Radio Equipment and Telecommunication Terminal Equipment directive 1999/5/EC.Mikael NilssonHead of Global Type ApprovalFCC StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received,including interference that may cause undesired operation.Any change or modification not expressly approved by Sony may void the user's authority to operate theequipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Industry Canada StatementThis device complies with RSS-210 of Industry Canada.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) thisdevice must accept any interference, including interference that may cause undesired operation of thedevice.This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Avis d’industrie CanadaLe présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts delicence.L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage,et, and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillageest susceptible d'en compromettre le fonctionnement.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
● DEVICE NUMBER：BL-HUB35A-TRB
electronics.
4.General use.
● Absolute Maximum Ratings(Ta=25℃)
Parameter Symbol Rating Unit
Power Dissipation Pd 80 mW
Forward Current I F 30 mA Peak Forward Current ＊1I FP 100 mA Reverse Volage V R 5 V Operating Temperature Topr -25℃~80℃-
Storage Temperature Tstg -30℃~85℃-
Soldering Temperature Tsol See Page 6 -
＊1 Condition for I FP is pulse of 1/10 duty and 0.1msec width.
● Typical Electro-Optical Characteristics Curves Forward current (mA)
R e l a t i v e l u m i n o u s i n t e n s i t y (@20m A )
F o r w a r d c u r r e n t (m A )
10
20
30
40
50Fig.1 Relative intensity vs. wavelength R e l a t i v e r a d i a n t i n t e n s i t y
Fig.2 Forward current derating curve
Tolerance for each Bin limit is ± 15 %
●BIN：
I n t e n s i t y B I N C O D E
●Judgment criteria of failure for the reliability
Measuring items Symbol Measuring conditions Judgement criteria for failure
Ux1.2 Forward voltage V F ( V) I F
=20mA Over
Ux2 Reverse current I R(uA) V R
=5V Over
SX0.5 Luminous intensity Iv ( mcd ) I F
=20mA Below Note: 1.U means the upper limit of specified characteristics. S means initial value.
2.Measurment shall be taken between 2 hours and after the test pieces have been returned to
normal ambient conditions after completion of each test.
seconds per solder-land is to be observed.
2. Reflow Soldering
Preheating : 140℃~160℃±5℃,within 2 minutes.
3.
Preheating : 120℃~150℃,within 120~180 sec.
Operation heating : 245℃±5℃within 5 sec.260℃ (Max)
Gradual Cooling (Avoid quenching).
Time
●Handling :
Care must be taken not to cause to the epoxy resin portion of BRIGHT LEDs while it is exposed to high temperature.
Care must be taken not rub the epoxy resin portion of BRIGHT LEDs with hard or sharp article such as the sand blast and the metal hook.
instantaneous voltage at the turning ON and OFF of the circuit. When using the pulse drive care must be taken to keep the average current within the rated figures.
Also, the circuit should be designed so as be subjected to reverse voltage when turning off the
BRIGHT LEDs. ● Storage:
In order to avoid the absorption of moisture, it is recommended to solder BRIGHT LEDs as soon as possible after unpacking the sealed envelope.
If the envelope is still packed, to store it in the environment as following: (1) Temperature : 5℃-30℃(41℉)Humidity : RH 60﹪Max.
(2) After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, or equivalent soldering process must be: a. Completed within 168 hours.
b. Stored at less than 30% RH.
(3) Devices require baking before mounting, if: (2) a or (2) b is not met. (4) If baking is required, devices must be baked under below conditions: 48 hours at 60℃±3℃. ● Package and Label of Products: (1) Package: Products are packed in one bag of 3000 pcs (one taping reel) and a label is attached on each bag. (2) Label: BRIGHT LED LOGO Part No. Quantity BIN.
Sealing Date
xx xx xx Location。