亚德客过滤器AF1500选型手册
亚德客二联件AFC1500选型手册
产品名称:亚德客二联件AFC1500选型手册
有些品牌的电磁阀和气缸能够实现无油润滑（靠润滑脂实现润滑功能），便不需要使用油雾器！过滤度一般为50-75μm，调压范围为0.5-10Mpa，如需过滤精度为5-10μm，10-20μm，25-40μm，及调压为0.05-0.3Mpa，0.05-1Mpa二大件无管连接而成的组件称为二联件。
二大件是多数气动系统中不可缺少的气源装置，安装在用气设备近处，是压缩空气质量的最后保证。
三大件的安装顺序依进气方向分别为空气过滤器、减压阀和油雾器。
空气过滤器和减压阀组合在一起可以称为气动二联件。
有些场合不能允许压缩空气中存在油雾，则需要使用油雾分离器将压缩空气中的油雾过滤掉。
SMC Air Filter AF10至AF60定制规格说明说明书
Specifications
Made-to-order no. Proof pressure (MPa) Maximum operating pressure (MPa) Ambient and fluid temperature (°C)
-X425 3.0 2.0
–5 to 60 (with no freezing)
Air Filter
AF10 to AF60
Made to Order Specifications:
Please contact SMC for detailed dimensions, specifications, and lead times.
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪
Including 2 mounting screws Note 4) Only metal bowl 2 is available. Note 5) Without a valve function Note 6) For thread type: NPT. This product is for overseas use only according to the
new Measurement Law. (The SI unit type is provided for use in Japan.) Note 7) ć: For thread type: NPT only
indicate in alphanumeric order. Example) AF30-03B-2R-X425
滤芯选型指南说明书
Equation:XFlow Rate:X=X=Practice:XFlow Rate:XPressure:=X=Specifi c GravityActual SystemFlow Rate (SCFM)(100 PSIG + 14.7 PSIG)(System Pressure (PSIG) + 14.7 PSIG)(System Temp. °F + 460°F)530°FTemperature:Pressure:Specifi c Gravity:Q.a.Ask your customer to explain their application/operating system. If the customer is operating at standard operating conditions (100 PSIG and 70°F) use the Housing Selection Chart on the next page to fi nd the correct fi lter housing. If not, ask your customer questions 1-5. Use this information to convert their system conditions to standard conditions by using the equation below. Then use this fl ow to fi nd the correct fi lter housing in the Housing Selection Chart on the next page.1. What type of gas are you fi ltering?2. What is the fl ow rate (SCFM)?3. What is the pressure (PSIG)?4. What is the temperature (°F)?5. What type of fi ltration is required (effi ciency, type of contamination, etc.)?See next page for Media Specifi cations Charts.136 SCFM X(100 PSIG + 14.7 PSIG)(150 PSIG + 14.7 PSIG)(100°F + 460°F)530°FX X 1 = 100 SCFM AdjustedFlow Rate:GasSpecifi cGravityAir 1Ammonia 0.58Argon 1.37Carbon Dioxide 1.52Carbon Monoxide0.96Chlorine 2.48Ethane1.04Ethylene 0.97Helium 0.13Hexane2.73Hydrogen 0.06Methane 0.55Natural Gas 0.66Neon 0.69Nitrogen0.96Oxygen 1.18Pentane 2.47Propane1.56Refer to this chart if you do not know the specifi c gravity of the gas you are fi ltering.Example:Parker Hannifi n Corporation Finite ® Filter Operation 500 Glaspie St.Oxford, MI 48371Phone: 248-628-6400Fax: 248-628-1850www.fi nitefi lter .com Bul. 1300-QRG-1“What fi lter housing do I need for my compressed air/gas application?”Specifi c Gravity:Temperature:Finite ® Quick Reference Guide_____SCFM @ 100 PSIG, 70°FAdjustedFlow Rate:Grade CoalescingEffi ciency0.3 to 0.6MicronAerosolsCoalescingFilters -MaximumOilCarryover1PPM w/wMicronRatingPressure Drop (PSID)@ Rated Flow2MediaDryMediaWet With10-20 wt.Oil499.995%0.0030.01 1.253-4699.97%0.0080.01 1.02-3799.5%0.090.50.250.5 - 0.7898.5%0.20.50.51-1.51095%0.85 1.00.5 1.5100WS N/A N/A100<0.25<0.503P N/A N/A30.25N/AA99%+3N/A N/A 1.0N/A1Tested per ADF-400 at 40 ppm inlet.2Add dry + wet for total pressure drop.3Oil vapor removal effi ciency is given for A media.Grade CoalescingEffi ciency0.3 to 0.6 MicronAerosolsCoalescingFilters -MaximumOil Carryover1PPM w/wMicronRatingPressure Drop (PSID)2@ Rated FlowMediaDryMediaWet With10-20 wt. Oil699.97%0.0080.01 1.5 4.0799.5%0.090.50.250.5898.5%0.50.5 1.0 3.51095%0.85 1.00.75 2.5100WS N/A N/A100<0.25<0.503P N/A N/A30.5N/AA99%+3N/A N/A 1.0N/A1Tested per ADF-400 at 40 ppm inlet.2Add dry + wet for total pressure drop.3Oil vapor removal effi ciency is given for A media.H-Series Media Specifi cation Chart H-Series:ASME Media Specifi cation ChartASME Replacement Element Part Numbers:How to Use the Housing Selection Charts:1. Find the grade your application requires,see Media Specifi cation Chart.2. Locate the grade in the Housing SelectionChart and fi nd your fl ow.3. Find the corresponding Housing Assembly.Grade End Seals Size6810C (Coalescer)Q (Coalescer w/builtin prefi lter)D (High Temp)U (Urethane)For use with C, Q, 3P (standard)S (Silicone)For use with C, Q, D, 3PV (Fluorocarbon)For use with C, Q, D, 3PStandard on 7CVP &100WS, leave thispart blank.Standard on A (AV)51-28085-25085-360To fi nd the sizeyou need, see theReplacementElement Sizecolumn on theASME HousingSelection Chart.3P7CVP100WSAFor example: 6QU51-280; 10DS85-250; 7CVP51-280; AV85-360.Note: _ is a placeholder to put in your port type. N = NPT, S = SAE, F = BSPF, T = BSPTASME Ves sels:HousingAssemblyReplacementElement SizePortSizePort Type NumberofElementsRequiredRated Flows: SCFM @ 100 PSIG (m3/hr @ 7 bar)Grade:6 (Coalescer)A (Adsorber)Grade:8 (Coalescer)Grade:7CVP (PleatedCoalescer)10 (Coalescer)3PU (Interceptor)100WS (WaterSeparator)Line Mount VesselsHT3-80151-2803"NPT11500 (2540)1800 (3050)2490 (4230)FT3-80151-2803"FLANGE11500 (2540)1800 (3050)2490 (4230)FT4-120185-2504"FLANGE12000 (3390)2400 (4070)3320 (5640)FT6-120185-3606"FLANGE13000 (5090)3600 (6110)4980 (8460)FT6-160351-2806"FLANGE34500 (7640)5400 (9170)7470 (12690)Floor Mount VesselsHF3-80151-2803"NPT11500 (2540)1800 (3050)2490 (4230)FF3-80151-2803"FLANGE11500 (2540)1800 (3050)2490 (4230)FF4-120185-2504"FLANGE12000 (3390)2400 (4070)3320 (5640)FF6-120185-3606"FLANGE13000 (5090)3600 (6110)4980 (8460)FF6-160351-2806"FLANGE34500 (7640)5400 (9170)7470 (12690)FF8-180451-2808"FLANGE46000 (10190)7200 (12230)9960 (16920)FF10-220751-28010"FLANGE710500 (17830)12600 (21400)17430 (29610)FF12-301151-28012"FLANGE1116500 (28030)19800 (33640)27390 (46530)FF16-361551-28016"FLANGE1522500 (38220)27000 (45870)37350 (63450)ASME Housing Selection ChartH-Series Housing Selection ChartHousingAssemblyPortSizeRated Flows: SCFM @ 100 PSIG (m3/hr @ 7 bar)Grade:4(Coalescer)Grade:6 (Coalescer)A (Adsorber)Grade7CVP (PleatedCoalescer)Grade:8 (Coalescer)Grade:10 (Coalescer)3PU (Interceptor)100WS (WaterSeparator)H_1S1/4"11 (19)15 (26)N/A20 (34)25 (43)H_15S3/8"15 (26)20 (34)N/A27 (46)33 (56)H_2S1/2"19 (32)25 (43)N/A34 (58)42 (71)H_1L1/4"23 (39)30 (51)N/A41 (68)50 (85)H_15L3/8"30 (51)40 (68)N/A55 (94)66 (112)H_2L1/2"38 (65)50 (85)N/A68 (116)83 (141)H_3S3/4"61 (104)80 (136)N/A109 (185)133 (226)H_4S1"76 (129)100 (170)N/A136 (231)166 (282)H_4L1"106 (180)140 (238)N/A191 (325)232 (394)H_5S 1 1/4"190 (323)250 (425)415 (706)330 (461)415 (706)H_6S 1 1/2"260 (442)350 (595) 600 (1020)465 (791)600 (1020)H_8E2"260 (442)350 (595) 600 (1020)465 (791)600 (1020)H_8S2"340 (578)450 (765) 750 (1275)600 (1020)750 (1275)H_8L2"470 (799)625 (1063) 1035 (1760)830 (1411)1035 (1760)H_0L 2 1/2"600 (1020)800 (1360) 1330 (2261)1060 (1802)1330 (2261)H_12L3"750 (1275)1000 (1700) 1660 (2822)1330 (2261)1660 (2822)*insert selected grade 4, 6, 8, 10. See media specifi cation chart for effi ciencies.HousingAssemblyCoalescer Coalescerw/innerretainerHigh Temp.Coalescerw/built inprefi lter7CVPPleatedCoalescer3PUInterceptor100WS WaterSeparatorAUAdsorberH_1S*C10-025*IU10-025*DS10-025*QU10-025N/A3PU10-025100WSU10-025AU10-025H_15S*C10-025*IU10-025*DS10-025*QU10-025N/A3PU10-025100WSU10-025AU10-025H_2S*C10-025*IU10-025*DS10-025*QU10-025N/A3PU10-025100WSU10-025AU10-025H_1L*C10-050*IU10-050*DS10-050*QU10-050N/A3PU10-050100WSU10-025AU10-050H_15L*C10-050*IU10-050*DS10-050*QU10-050N/A3PU10-050100WSU10-025AU10-050H_2L*C10-050*IU10-050*DS10-050*QU10-050N/A3PU10-050100WSU10-025AU10-050H_3S*C15-060*IU15-060*DS15-060*QU15-060N/A3PU15-060100WSU15-060AU15-060H_4S*C15-060*IU15-060*DS15-060*QU15-060N/A3PU15-060100WSU15-060AU15-060H_4L*C15-095*IU15-095*DS15-095*QU15-095N/A3PU15-095100WSU15-060AU15-095H_5S*CU25-130*CU25-130*DV25-130*QU25-1307CVP25-1303PU25-130100WS25-130AU25-130H_6S*CU25-130*CU25-130*DV25-130*QU25-1307CVP25-1303PU25-130100WS25-130AU25-130H_8E*CU25-130*CU25-130*DV25-130*QU25-1307CVP25-1303PU25-130100WS25-130AU25-130H_8S*CU25-187*CU25-187*DV25-187*QU25-1877CVP25-1873PU25-187100WS25-187AU25-187H_8L*CU25-235*CU25-235*DV25-235*QU25-2357CVP25-2353PU25-235100WS25-235AU25-235H_0L*CU35-280*CU35-280*DV35-280*QU35-2807CVP35-2803PU35-280100WS35-280AU35-280H_12L*CU35-280*CU35-280*DV35-280*QU35-2807CVP35-2803PU35-280100WS35-280AU35-280H-SeriesReplacementElement PartNumbersThis information is aquick reference quide.For more informationsee Finite’s Catalog1300-300/USA.。
亚德客气动元器件选型教材
C-ZPX□ H 大型真空吸盘
C-ZPX
X-KZFC型真空过滤器
水平真空接口
红色对应日系型号
什么是真空？
真空的吸附与气缸的作动原理一样 都是运用压力差来进行作动
真空发生 器 真空吸盘
真空系统的应用
真空发生装置
真空泵
真空发生器
结构负载，大流量工作，不 易频繁起停，适合集中使用
结构简单适用于流量不大的 间歇性工作
GR、SSR2R00200、BR
AR
2008 - 7
气动控制元件
3V 4M
B03
4V
2W
2S
4F
4H
ESV
4HV
ASC
XPPV
控制元件
按照阀芯的结构形式可分为：滑柱式、截止式。 台肩
功能特点：
易实现记忆功能 通用性 强
气体质量要求较高
频率高 流 量较小
单电控两位置先导式电磁换向阀
单电控先导式滑阀的特点是： ①、控制的主阀不具有记忆功能； ②、控制信号为长信号； ③、控制力大，控制信号必须克服复位弹簧力及P腔气体作用于阀芯上
4.气缸本体两面均有定位孔， 安装使用方便；
5.双气缸结构，可实 现双倍出力。
齿条采用SUS304精度 等级8级,表面氮化处理
本体采用铝挤型模具， 表面喷细砂后硬阳处理
前盖压铸成型,表面 喷砂-烤漆处理。
后盖压铸成型，表 面喷砂-烤漆处理。
齿轮采用20Cr冷挤压工艺，模数1.5， 精度等级8级，表面氮化处理。
执行 元件
空压机
F
`
v=1 ; p=1
v=0.5 ; p=2
p1 × V1 = p2 × V2
主管路处理装置
亚德客选型电子手册
标题：亚德客选型电子手册亚德客是全球知名专业生产各类气动器材的大型企业集团，致力于向客户提供满足其需求的气动控制元件、气动执行元件、气源处理元件、气动辅助元件等各类气动器材、服务和解决方案，为客户创造长期的价值和潜在的增长。
亚德客始创于1988年，现辖三大生产基地和一家营销中心，亚德客生产基地厂房面积达37万8千平方米，全球员工总计超过4500人，专业研发技术人员300多人，亚德客选型电子手册总投资1.5亿美元，年生产能力达5,000万件套，产品畅销中国、东南亚、欧美等国家和地区。
亚德客在中国大陆地区拥有近百家直销分公司/营业部，亚德客选型电子手册在全球更是有数千家经销商，主要位于欧洲、美洲及亚洲，形成了完善的销售网络和售后服务体系，可随时为客户提供便捷的服务。
亚德客以拓展集团生产和服务为未来发展的战略目标，坚持走人本优先、改革创新和集团化道路。
秉承“人本、共享、发展、责任”的企业核心价值观，亚德客始终如一地贯彻“以客为尊”的经营理念，始终如一地坚持“以技术创新为核心，亚德客选型电子手册以市场需求为导向”的经营方针，藉以不断完善“建立共好、责任承担、赏罚分明、学习成长”的集团文化，努力奋斗，自强不息，长久致力于全球工业自动化的持续发展。
台湾亚德客工业股份有限公司（简称台亚）成立于1988年11月，前身系健良股份有限公司，1990年更名为台亚。
早期的台亚主要生产电磁阀，此后亚德客选型电子手册陆续研发生产气缸、气源处理等产品。
目前，台亚产品以特殊规格气缸为主，拥有七大类十余系列数百个品种，年产量达到20万件套，主要供应台湾本地市场，满足客户需求及时效性。
1998年，台亚在同行中率先通过“ISO9000质量管理体系认证”；2004年，台亚取得“ISO14000环境体系认证”及“CE认证”。
长期以来，台亚秉持“质量第一、交货准时”的服务精神及理念满足客户需求，亚德客选型电子手册不断引进先进设备、生产工艺提升产品质量与品质。
亚德客电磁阀选型手册
亚德客电磁阀选型手册 Company Document number：WTUT-WT88Y-W8BBGB-BWYTT-19998
产品名称:电磁阀亚德客电磁阀选型手册
电磁阀（Electromagneticvalve）是用电磁控制的工业设备，是用来控制流体的自动化基础元件，属于执行器，并不限于液压、气动。
用在工业控制系统中调整介质的方向、流量、速度和其他的参数。
电磁阀可以配合不同的电路来实现预期的控制，而控制的精度和灵活性都能够保证。
电磁阀有很多种，不同的电磁阀在控制系统的不同位置发挥作用，最常用的是单向阀、安全阀、方向控制阀、速度调节阀等。
亚德客产品使用维护教程.
PDF 文件使用 "pdfFactory Pro" 试用版本创建
2008 - 7
30
考虑负荷的方向，采取适当的安装（法兰型安装）。
○
PDF 文件使用 "pdfFactory Pro" 试用版本创建
×
2008 - 7
31
考虑负荷的方向，采取适当的安装（法兰型安装）。
2008 - 7
6
气动系统对压缩空气的要求
1、不能直接使用由空气压缩机排出的压缩空气： 压缩空气中含有一定量的水份、油份和灰尘，经过压缩 后空气的温度高达140℃～170℃左右，部分水及油份已 变成气态。
◆ 压缩空气中的油雾气可能聚集在储气罐、管道、气动系 统的容 器中形成易燃物，会对气动系统造成很大的危害
要符合产品样本上的规定。 4、不要用于周围有热源、受到辐射热影响的场所，或者采取措施遮断辐射热 5、有阳光直射的场所，应加保护罩遮阳光。 6、有水滴、油或焊花等场所，要采取适当防护措施。 7、在湿度大、粉尘多的场所使用，要采取必要的防护措施。 8、带磁气缸不要用于强磁场的环境里
PDF 文件使用 "pdfFactory Pro" 试用版本创建
最大含油量 分类 （mg/m3）
5
25
4
5
5
25
5
25
2
0.1
2
0.1
3
1
3
1
3
1
3
1
2
0.1
1
0.01
1
0.01
2008 - 7
10
气动系统润滑油使用注意事项：
（1）当压缩空气润滑时，油雾不能超过25mg/m3（即上 表第五类）；压缩空气处理后应达到第二类，即无 油压缩空气。
Parker Zander 迷你过滤器系列：压缩空气、气体和疲劳过滤器说明书
Compressed air,gas and vacuum filtersCompressed air filters are now recognised as being an integral part of any system.Few,if any, compressed air systems can ope-rate successfully without high effi-ciency filters.Production and pro-cess standards demand the finest quality air and components are now manufactured to such tight tolerances that no contamination is permitted.We are one of the leaders in the purification of compressed air,gas and vacuum filters.Their product development is lead by strongpartnerships with compressed airand gas users to ensure the bestavailable product for increasinglydemanding applications.Dust,dirt and oil mist filtration iscommon enough today.ParkerZander emphasises,not only thefiltration efficiency but,important-ly,links this to energy costs interms of pressure differential,pro-duct consistency and reliability.Micro-filter-compressed air,gas and vacuum filtersBoth types of housings are built to the highest quality standards and have a double surface protection. The aluminium housings are alu-chromed and epoxy powder coated,the steel housings are intensivly cle-aned,polyester primed and acrylicpainted.Thanks to the attention of qualitysurface treatment,Parker Zanderoffers a10year guarantee on thefilter housings.This gives confiden-ce to the user!G-Housings with threaded connection from G1/4to G3 -High grade aluminium casting -Alu-chromed in and outside to prevent corrosion-Powder coated to ensure top quality finish F-Flanged housingsDN80to DN300-Welded mild steel vessels -Sand blasted,cleaned and de-greased-Polyester primed in and outside -Acrylic paint outsideMicro-filters in two housing formats:Filter HousingsUntreated and Alu-chromed filter bowlsafter a salt spray test acc.toDIN50021SS>250hoursAll Micro-filter housings are two piece.This means that,no matter what the size is,one person can change the filter ele-ments.This saves having to employ a helper!The F flanged filter housings,which can weigh up to a ton,have a hinged lower cover,which one person can open and close,when it is time to change the elements.Parker ZANDER Micro-filterMicro-filter Housing ConstructionOther types of housingMicro-filter Tie RodThe tie rod fixing of the element to the housing ensures that the ele-ment sits in the housing without any possibility of movement and therefore leakage between the dirty and clean side.The lower end cap of the element is firmly secured to the tie rod.This elimi-nates any possibility of the end cap flying off under severe shock conditions.Equally,the tie rod makes the ele-ment easier to change.There is no risk of the element end cap corro-ding.This does occur when alumini-um threads on the element corrode into the housing.This means anexpensive new housing instead of a simple ele-ment replacement.A small difference with large cost savings!Parker Zander element secured with tie rodAnother methodMicro-filter Modular ConceptThe user can install simply and economically Micro-filters inmodular units up to the ing a filter combination kit,the installer can link together up to three filters in a set.This lowers the conse-quential pressure drop.These filter combinationscan be easily wall mounted with brackets.Parker Zander filter housings combinati-onsOther types of housing linked with pipe or nip-ples3piece hous-ing with retain-ing ring2piece housingG FWDH KW G1/4-G3 DN80-DN300Standard combination (up to G13size only)Combination kits wall brackets G2StandardScrewedplugs Pressure diffe-rential gaugemanual drainFilter with G1/2thread connection,plug in(Standard on V–XP4)Filter with G1thread connection,oil removal"no-loss”condensate drain ED3000range.G2connection with activated carbon filter,Wall bracketsExamplesEOPK2K3Electronic filtermonitor DeltatronicOil indicatorElectronic level sensing drain Electronic level sensing drain Parker Zander filters use machine pleated elements,which form the heart of the filter.These pictures -higher dirt holding capacity -longer service life -lower operating costsTechnical DataC a p a c i t y *1n o m i n a lC o n n e c t i o nM a x .p r e s s u r eD i m e n s i o n sW e i g h tF i l t e r e l e m e n t*2calculated for constant velocity and 20°CExample 1:If you have a flow of 1300m 3/h (1bar a and 20˚C)–)at a minimum working pressure of 10bar e,what size filter do you require?Answer:Flow ÷f =1300m 3/h ÷1.38=940m 3/h =>G14size Example 2:What is the nominal flow through a G14filter with a minimum working pressure of 10bar e?Answer:Flow:·f =940m 3/h ·1.38=1300m 3/h (1bar a and 20˚C)Micro-filterParker Zander mm mm mm mm Anzahl/Type m 3/h G/DN bar A B C D kg TypeG 230G 1/4166016514600,61/1030G 350G 1/4168721521751,01/1050G 570G 3/8168721521901,01/1070G 7100G 1/21687285211601,21/1140G 9180G 3/416130325431353,81/2010G 11300G 116130425432354,51/2020G 12470G 11/216130525433355,01/2030G 13700G 11/216130725435256,41/2050G 14940G 216164825485209,61/3050G 171450G 21616410754877012,31/3075G 181940G 21/21625010507460024,61/5060G 192400G 31625012007475027,01/5075F 171850DN 8016380128017553052,01/3075F 192920DN 8016440132020553079,01/5075F 203700DN 100165001440230550106,02/3075F 305550DN 100165001440230550106,53/3075F 407400DN 150166401590280550148,04/3075F 6011100DN 150167901650300550208,06/3075F 8014800DN 200167901730340550230,08/3075F 10018500DN 200168401780360550368,010/3075F 12022200DN 250169401940420600450,012/3075F 16029600DN 250169401940420600460,016/3075F 20037000DN 300169401970450600520,020/3075*1Calculated at 1bar a and 20˚C at 7barg working pressureFilter Element Performance Tables Pre-filter element V–0.02bar (dry)–0.07bar (saturated)–99.99%(3µ)General Purpose Filter ZP –0.03bar (dry)–0.10bar (saturated)–99.9999%(1µ)–≤0.5mg/m 3(1bar a and 20˚C)Oil Removal Filter XP –0.06bar (dry)–0.15bar (saturated)–99.99999%(0.01µ)–≤0.01mg/m 3(1bar a and 20˚C)Super Fine Filter XP4–0.12bar (dry)–0.28bar (saturated)–≥99.99999%(0.01µ)–≤0.001mg/m 3(1bar a and 20˚C)Activated Carbon Filter A –0.03bar -≤0.003mg/m 3(1bar a and 20˚C)with an inlet concentration of ≤0.01mg/m 3Activated Carbon Cartridge KTA –Depending on size 0.15-0.4bar –bar (Oil Removal as A grade)Conversion factor f for other operating pressures*2Operating pressure bar e12345678910111213141516f=0.250.380.500.630.750.881.001.131.251.381.501.631.751.882.002.13DimensionsPre-filter,General purpose filter and Superfine filter V,ZP,ZX,XP4Standard format with automatic condensate drainGrades VD (E),ZPD(E),XPD(E)and XP4(E)Complete with automatic drain and differential pressure gauge (E with volt-free contact)Activated carbon filter A &KTAStandard format with manual drainActivated carbon filter AOP &KTAOPComplete with manual drain and oil indicatorDimensions with electronic condensate drainsLS rangeLC rangeG2-G13G14-G17/F17G18-F20F40-F120F160-F200G2-G13G14-G19/F19F20-F40F60-F200ED 3002ED 3004ED 3007ED 3030ED 3100ED2010ED2010ED2010ED2020MKMKMKMKMKMKMKMKMKM14-G38G12-G12G12-G12G10-G12G10-G12M14-G12G12-G12G10-G12G10-G34G10-G12Parker Hannifin CorporationZANDER Aufbereitungstechnik GmbH Im Teelbruch 118D-45219EssenTel:+49(0)20549341Fax:+49(0)2054934164www.zander.deYour local authorized Parker distributor。
亚德客二联件GFR400-15选型手册
产品名称:亚德客二联件GFR400-15选型手册
气压传动系统中，气动二联件是指空气过滤器和减压阀二大件无管连接而成的组件称为二联件。
二大件是多数气动系统中不可缺少的气源装置，安装在用气设备近处，是压缩空气质量的最后保证。
三大件的安装顺序依进气方向分别为空气过滤器、减压阀和油雾器。
空气过滤器和减压阀组合在一起可以称为气动二联件。
有些场合不能允许压缩空气中存在油雾，则需要使用油雾分离器将压缩空气中的油雾过滤掉。
Parker Pneumatic 一般工业氩滤芯说明书
P3N Miniature Prep-Air II Global Air Preparation Products
Material specifications
Description Baffle Body Bowl Deflector Filter element
Pressures over 150 PSIG
Auto internal drain 1/8" with 1/2" drain plate 1/2 NPT tapped port 0.01 micron 1.0 micron Adsorber
.55 (14)
35F (Hi-Flow) DP2-02-001 GRP-95-022 DP3-01-000 P32KA00DA GRP-95-392 GRP-95-393 MTP-95-502 MSP-95-502 MXP-95-502
Part number (NPT) Automatic drain 35F77EAP 35F77HAP 35F87EAP 35F87HAP 43FN7EAP 43FN7HAP
Industrial
Separators Proportional Steel
Bulk Liquid Precision / Stainless General
43F (Hi-Flow) DP2-02-001 GRP-95-022 DP3-01-000 P32KA00DA GRP-95-392 GRP-95-393 MTP-95-562 MSP-95-876 MXP-95-565
General Stainless Precision / Bulk Liquid