YA-2RB-A64;中文规格书,Datasheet资料
A6KS-162RF;A6K-102RF;A6K-102RS;A6K-104RF;A6K-104RS;中文规格书,Datasheet资料
1A6K/A6KSMiniature Rotary DIP SwitchMiniature (7.2 × 7.2mm size) Rotary DIP Switch●Mounting space reduced by 50%. (compared with conventional models)●SMT and through hole type Available. Side-actuated type available.●Gold-plated contacts ensure high reliability.■List of ModelsRoHS CompliantMode setting of MPU ModemController of servo motor Coin changerProgram controllerApplication2Note:Order in multiples of the package quantity.■Ratings/CharacteristicsNote:Add 0.03 g for the extended-actuator type of each model.Ratings25 mA at 24 VDC, 10 μA (minimum current) at 3.5 VDC Ambient operating temperature –30 to +80°C at 60% max. (with no icing or condensation)Ambient operating humidity 35% to 95% (at +5 to +35°C)Insulation resistance 100 M Ω min. (at 250 VDC)Contact resistance 200 m Ω max. (initial value)Dielectric strength Between terminals 250 VAC for 1 minVibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude Shock resistance Malfunction 300 m/s 2 min.Durability Electrical20,000 steps min.Operating torque 1.96 × 10−2 N·m {2 gf·m} max.Weight (See note.)Through hole terminal Top-actuated, flat: Approx. 0.4 g, Side-actuated, flat: Approx. 0.7 g SMT terminal Top-actuated, flat: Approx. 0.4 g, Side-actuated, flat: Approx. 0.4 g3■Output Codes10-position Models16-position ModelsNote:“●” indicates that the internal switch is ON.■Dimensions(Unit: mm)Through hole type●Top-actuated Flat Models with 3 × 3 Terminal Arrangement ●Top-actuated Extended actuator Models with 3 × 3 Terminal Arrangement●Side-actuated Flat Models with 3 × 3 Terminal Arrangement●Side-actuated Extended-actuator Models with 3 × 3 Terminal ArrangementNote:Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.Code BCD Decimal code Position 124801●2●3●●4●5●●6●●7●●●8●9●●Code BCD Hexadecimal codePosition124801●2●3●●4●5●●6●●7●●●8●9●●A ●●B ●●●C ●●D ●●●E ●●●F●●●●A6K-102RFA6K-102RSA6KV-102RFA6KV-102RS4●Side-actuated Flat Models with 5 × 2 Terminal Arrangement ●Side-actuated Extended-actuator Models with 5 × 2 Terminal ArrangementSMT type●Top-actuated Flat Models with 3 × 3 Terminal Arrangement ●Top-actuated Extended actuator Models with 3 × 3 Terminal Arrangement●Top-actuated Flat Models With 5 × 2 Terminal Arrangement●Top-actuated Extended actuator Models with 5 × 2 Terminal ArrangementNote:Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.A6K-104RFA6K-104RSA6KV-104RFA6KV-104RSA6KS-102RFA6KS-102RSA6KS-104RFA6KS-104RS●5 × 2 Terminal ArrangementNote:Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.(Top-actuated Models)(Side-actuated Models)(Top-actuated Models)Through hole(Top-actuated Models)Through hole(Side-actuated Models):Through hole and Pattern prohibited areaSMT(Top-actuated Models)SMT(Side-actuated Models)5■Internal Connections Contact Form●Top-actuated/Side-actuated Models with 3 × 3●Top-actuated Models with 5 × 2 Terminal■PrecautionsBe sure to read the Safety precautions common to all DIP Switches for correct use.6分销商库存信息:OMRONA6KS-162RF A6K-102RF A6K-102RSA6K-104RF A6K-104RS A6K-162RFA6K-162RS A6KS-164RS A6KS-162RSA6KS-104RF A6KS-164RF A6KSV-104RS A6KV-102RF A6KV-102RS A6KV-104RFA6KV-104RS A6KV-162RF A6KV-162RSA6KV-164RF A6KSV-164RF A6KS-102RFA6KV-164RS A6KSV-164RS A6KSV-104RF A6KS-102RF-P A6KS-104RF-P A6KS-162RF-P A6KS-164RF-P A6KS-102RS-P A6KS-104RS-P A6KS-162RS-P A6KS-164RS-P A6KSV-104RS-P A6KSV-164RF-P A6KSV-164RS-P A6KSV-104RF-P A6KS-102RS A6KS-104RS。
RB说明书中文版
R B说明书中文版Document serial number【NL89WT-NY98YT-NC8CB-NNUUT-NUT108】新型环保制冷剂R415B (原THR01b)产品说明书目录1. R415B产品的理化指标2. R415B产品的主要物性参数3. R415B产品的环境性能4. R415B产品的热工性能5. R415B产品的安全性能6. R415B产品的直接充灌性能7. R415B产品的使用技术和充灌指南8. 技术协助附表1、充注用R415B的饱和性质表附表2、充注用R134a的饱和性质表说明：此版本说明书，系根据近年来实际应用需要，对原说明书作相应的修订和补充。
使用R415B时，请以此版本为准。
今后还将根据实际需要，不定期地出版新版本说明书。
R415B（原THR01b）可直接充灌于汽车空调中替代R134a。
R415B是美国制冷供暖空调工程师学会（ASHRAE）授予THR01b的国际编号。
R415B于1998年获美国国家环保局“重要的新替代物”（SNAP）项目的认可。
R415B被我国国家环保总局评为“1999年A类国家重点环境保护实用技术”，是2004年国家环保总局推荐的消耗臭氧层物质（ODS）替代品。
R415B的主要特点是：⑴环保性能好；⑵安全性能好。
无毒、不易燃；⑶热工性能好。
节能，制冷性能好，降温速度快；⑷直接充灌性能好。
不必改动原R134a制冷空调系统的部件和生产线，可直接充灌，转轨费用低。
1． R415B产品的理化指标外观：无色透明，不混浊气味：无异臭纯度：≥%水份：≤10mg/kg酸度（以HCl计）：≤kg蒸发残留物：≤50mg/kg2． R415B产品的主要物性参数R415B为近共沸的二元混合物。
表1比较了R415B与R12和R134a的主要物性参数，可知R415B的相变汽化潜热大、临界温度高、导热系数大和粘度小等几个特征使R415B的制冷系统充装量更少、制冷速度更快、换热和流动效果更好。
RB-4P规格书
规格
DC110V,0.5A
额定使用电流 注）
AC220V,0.5A
DC110V,0.3A
初期接触电阻
500mΩ以下（DC6V，1A）
最小使用电压电流 注）
24V,1mA
时间 动作时间
注）
20ms.以下（不含弹跳）
特性 复位时间
注）
20ms.以下（不含弹跳）
弹跳时间
3ms 以下
绝缘
绝缘电阻
100MΩ以上（DC500V 兆欧）
8. 其他 产品改良时规格尺寸的变更恕不一一通知。
9. 用语说明
表 4.用语说明
用语
说明
额定通电电流
接点无开闭，不超过各部位的温度上升限度，能够连续向开闭部通电
的电流值。
最大输入电流
参考 IEC PAS 62246-2-1，可以输入 10 次的最大电流值
最大断路电流
参考 IEC PAS 62246-2-1，可以断路 10 次的最大电流值
额定使用电压电流
AC220V DC110V
0.5A
0.3A
0.5A
0.3A
接点构成
2a2b 4a
概算重量
150g 150g
指示灯
适用插座：TP311X-4 型（另配）
安装孔
正规安装方向 记号以及端子符号（TOP VIEW）
耐振绑带（另行配置） （作为附属品配置在底座上）
配电配盘电开盘孔开尺孔寸尺图寸图
7. 使用注意事项 1） 请避免跌落。万一跌落，请先检查玻璃破裂以及动作特性，确认无异常后再使用。 2） 线圈有极性，请将端子符号①接在+极，将⑾接在-极。此外，线圈驱动电源请使用电池
电源的完全直流或者三相全波整流那样波动率 5%以下的电源。 3） 线圈驱动回路请使用施加额定电压的直投法（瞬时 ON，瞬时 OFF）。线圈施加电压逐渐
24AA16中文资料
• Can be operated as a serial ROM
• ESD protection > 4,000V
• 10,000,000 erase/write cycles guaranteed
• Data retention > 200 years
• 8-pin DIP, 8-lead or 14-lead SOIC packages
- 10 µA standby current typical at 5.5V
- 3 µA standby current typical at 1.8V
• Organized as 8 blocks of 256 bytes (8 x 256 x 8)
• 2-wire serial interface bus, I2C™ compatible
• Available for extended temperature ranges
- Commercial (C): - Industrial (I):
0˚C to +70°C -40°C to +85°C
DESCRIPTION
The Microchip Technology Inc. 24AA16 is a 1.8 volt 16K bit Electrically Erasable PROM. The device is organized as eight blocks of 256 x 8-bit memory with a 2wire serial interface. Low voltage design permits operation down to 1.8 volts with standby and active currents of only 3 µA and 1 mA, respectively. The 24AA16 also has a page-write capability for up to 16 bytes of data. The 24AA16 is available in the standard 8-pin DIP and both 8-lead and 14-lead surface mount SOIC packages.
BCM62B,215;中文规格书,Datasheet资料
Symbol Parameter
Per transistor TR1
VCEO hFE
collector-emitter voltage DC current gain
Per transistor
IC
collector current
Per device
IC1/IE2
current matching
Conditions
Ce
emitter capacitance VEB = −0.5 V;
IC = ic = 0 A;
f = 1 MHz
fT
transition frequency VCE = −5 V;
IC = −10 mA;
f = 100 MHz
NF
noise figure
VCE = −5 V; IC = −0.2 mA; RS = 2 kΩ; f = 10 Hz to
BCM62B
PNP/PNP matched double transistor
5. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Unit K/W K/W
BCM62B_2
Product data sheet
/
Rev. 02 — 28 August 2009
© NXP B.V. 2009. All rights reserved.
3 of 13
NXP Semiconductors
BCM62B
PNP/PNP matched double transistor
A6R中文资料
A6R/A6RVRotary DIP SwitchLow-cost Rotary DIP Switches■Series includes top-actuated, side-actuated, flat,and extended-shaft models.■The rotor has an O-ring sealed construction thatprevents the ingress of dirt and dust.■Two different types of terminal arrangement areavailable for each model to allow flexibility in the circuit design.Ordering Information■List of ModelsNote:Switches are delivered in units of 48. Orders must be made in multiples of 48.Specifications■Ratings/Characteristics■Output Codes10-position Models16-position ModelsNote:“●” indicates that the internal switch is ON.Rating25 mA at 24 VDCAmbient operating temperature -25 to 80°C (with no icing or condensation)Ambient operating humidity35% to 95%Insulation resistance 100 M W min. (at 250 VDC)Contact resistance 200 m W max. (initial value)Dielectric strength 250VAC for 1 minute between terminals of the same po-larityVibration resistance Malfunction: 10 to 55Hz, 1.5-mm double amplitude Shock resistance Malfunction: Approx. 300 m/s 2Electrical life expect-ancy5,000 steps min.Operating torque 1.96 ´ 10-2 N·m max.Weight4´1, top-actuated: 0.64g 3´3, top-actuated: 0.62g 4´1, side-actuated: 0.8g 3´3, side-actuated: 0.83g(Add 0.13 g for the extended-shaft version of each model.)CodeReal code CodeReal code Position1248Position1248001●1●2●2●3●●3●●4●4●5●●5●●6●●6●●7●●●7●●●8●8●9●●9●●A ●●B ●●●C ●●D ●●●E ●●●F●●●●元器件交易网DimensionsNote: 1.All units are in millimeters unless otherwise indicated.2.A tolerance of ±0.4 mm applies to the above dimensions unless otherwise specified.Top-actuated Flat Models with 4´1 Terminal ArrangementA6R-101RFA6R-161RF Top-actuated Extended-shaft Models with 4´1 Terminal ArrangementA6R-101RSA6R-161RSTop-actuated Flat Models with 3´3 Terminal ArrangementA6R-102RFA6R-162RF Top-actuated Extended-shaft Models with 3´3 Terminal ArrangementA6R-102RSA6R-162RSSide-actuated Flat Models with 4´1 Terminal ArrangementA6RV-101RF A6RV-161RFSide-actuated Extended-shaft Models with 4´1 Terminal ArrangementA6RV-101RS A6RV-161RSSide-actuated Flat Models with 3´3 Terminal ArrangementA6RV-102RF A6RV-162RFSide-actuated Extended-shaft Models with 3´3 Terminal ArrangementA6RV-102RS A6RV-162RS■PCB Cutout DimensionsTop-actuated ModelsSide-actuated Models4´1 Terminal Arrangement3´3 T erminal Arrangement4´1 Terminal Arrangement3´3 T erminal ArrangementPrecautionsBe sure to refer to General Precautions on pages 4 to 6 for details on proper use.ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. A512-E1-02。
PVG612AS-TPBF;PVG612A;PVG612AS-T;PVG612ASPBF;中文规格书,Datasheet资料
The PVG612A Series Photovoltaic Relay is a sin glepole, normally open solid-state re lay that can replace electromechani cal re lays in many applications. It util izes International Rectifier’s proprietary HEXFET power MOSFET as the output switch, driven by an inte grated circuit photovoltaic gen erator of novel construction. The output switch is con trolled by radiation from a GaAlAs light emit ting diode (LED) which is optically isolated from the photovol taic generator. These units exceed the performance capabilities of electromechanical relays in operating life, sensitivity, stability of on-resistance, miniaturization, insensitivity to magnetic fields and ruggedess. The compact PVG612A is particularly suited for isolated switching of high currents from 12 to 48 Volt AC or DC power sources. Series PVG612A Relays are packaged in a 6-pin, molded DIP package with either thru-hole or surface mount (gull-wing) termi nals. It is avail able in standard plastic ship ping tubes or on tape-and-reel. Please refer to Part Identifica tion in formation opposite.
LM555CMX;LM555CM;LM555CN;NE555DX;NE555D;中文规格书,Datasheet资料
1. Monostable Operation
Trigger RL
4
RESET
2 TRIG
8
Vcc
DISCH 7
THRES 6
3 OUT
GND
1
CONT 5
+Vcc RA
C1 C2
Figure 1. Monoatable Circuit
Capacitance(uF)
102
101
=1kΩ RA
10kΩ
ACCUR Δt/ΔT
Δt/ΔVCC
RA = 1kΩ to100kΩ C = 0.1μF
Min. Typ. Max. Unit
4.5
-
16
V
-
3
6
mA
-
7.5 15
mA
-
1.0 3.0
%
50ppm/°C来自0.1 0.5 %/V
Timing Error (Astable) Intial Accuracy (Note2) Drift with Temperature (Note4) Drift with Supply Voltage (Note4) Control Voltage
-
V
- 100 -
ns
- 100 -
ns
-
20 100
nA
Notes:
1. When the output is high, the supply current is typically 1mA less than at VCC = 5V. 2. Tested at VCC = 5.0V and VCC = 15V. 3. This will determine the maximum value of RA + RB for 15V operation, the max. total R = 20MΩ, and for 5V operation, the max.
2N5064_DataSheet
Thyristor2N5064sensitive gateGENERAL DESCRIPTIONQUICK REFERENCE DATAGlass passivated sensitive gate SYMBOL PARAMETERMAX.UNIT thyristor in a plastic envelope,intended for use in general purpose V DRM ,Repetitive peak off-state voltages 200V switching and phase control V RRM applications.This device is intended I T(AV)Average on-state current 0.5A to be interfaced directly to I T(RMS)RMS on-state current0.8A microcontrollers,logic integreated I TSMNon-repetitive peak on-state current10Acircuits and other low power gate trigger circuits.PINNING - TO92 variantPIN CONFIGURATION SYMBOLLIMITING VALUESLimiting values in accordance with the Absolute Maximum System (IEC 134).SYMBOLPARAMETERCONDITIONS MIN.MAX.UNIT V DRM , V RRM Repetitive peak off-state-200V voltagesI T(AV)Average on-state current half sine wave T c ≤ 67 ˚C -0.51A T c ≤ 102 ˚C-0.255A I T(RMS)RMS on-state current all conduction angles-0.8A I TRM Repetitive peak on-state -8A currentI TSM Non-repetitive peak half sine wave; T a = 25 ˚C prior to surge;-10A on-state current t = 8.3 ms I 2t I 2t for fusingt = 8.3 ms-0.4A 2s I GM Peak gate current T a = 25˚C, t p = 300µs; f = 120 Hz -1A V GM Peak gate voltage-5V V RGM Peak reverse gate voltage -5V P GM Peak gate power T a = 25˚C-0.1W P G(AV)Average gate power T a = 25˚C, over any 16 ms period-0.01W T stg Storage temperature -65150˚C T jOperating junction -65125˚CtemperatureTHERMAL RESISTANCESSYMBOL PARAMETER CONDITIONS MIN.TYP.MAX.UNIT R th j-c Thermal resistance see note:1--75K/W junction to case R th j-aThermal resistance -200-K/Wjunction to ambientSTATIC CHARACTERISTICST c = 25 ˚C, R GK = 1 k Ω unless otherwise stated SYMBOL PARAMETER CONDITIONSMIN.TYP.MAX.UNIT I GTGate trigger currentT c = 25 ˚C --200µA T c = -65 ˚C--350µA V D = V DRM(max); R L = 100 Ω; gate open circuitI L Latching current V D = 12 V; R GK = 1 k Ω--6mA I H Holding current V D = 12 V; R GK = 1 k Ω--5mA V T On-state voltage I T = 1.2 A peak; t p = 300 µs; δ ≤ 0.01-- 1.7V V GTGate trigger voltageT j = 25 ˚C --0.8V T j = -65 ˚C -- 1.2V T j = 125 ˚C0.1--VV D = V DRM(max); R L = 100 Ω; gate open circuitI D , I ROff-state leakage currentV D = V DRM(max); V R = V RRM(max)T j = 25 ˚C --10µA T j = 125 ˚C--50µADYNAMIC CHARACTERISTICST c = 25 ˚C, R GK = 1 k Ω unless otherwise stated SYMBOL PARAMETER CONDITIONSMIN.TYP.MAX.UNIT dV D /dt Critical rate of rise of V DM = 67% V DRM(max); T j = 125 ˚C;-25-V/µs off-state voltageexponential waveform; R GK = 1 k Ωt gt Gate controlled turn-on I TM = 2 A; V D = V DRM(max); I G = 10 mA;-2-µs timedI G /dt = 0.1 A/µst qCircuit commutated V DM = 67% V DRM(max); T j = 125 ˚C;-100-µsturn-off timeI TM = 1.6 A; V R = 35 V; dI TM /dt = 30 A/µs;dV D /dt = 2 V/µs; R GK = 1 k Ω1 This measurement is made with the case mounted "flat side down" on a heatsink and held in position by means of a metal clamp over the curved surface.MECHANICAL DATANotes1. Epoxy meets UL94 V0 at 1/8".DEFINITIONSData sheet statusObjective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications.Limiting valuesLimiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application informationWhere application information is given, it is advisory and does not form part of the specification.© Philips Electronics N.V. 1997All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.LIFE SUPPORT APPLICATIONSThese products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.。
AQY410SZ;AQY412S;中文规格书,Datasheet资料
Panasonic Corporation Automation Controls Business Unit /ac/eASCTB140E 201201-TTYPES* Indicate the peak AC and DC values.Note:For space reasons, the three initial letters of the part number “AQY”, the surface mount terminal shape indicator “S” and the packing style indicator “X” or “Z” are notmarked on the device. (Ex. the label for product number AQY412SX is 412)RATING1. Absolute maximum ratings (Ambient temperature: 25°C 77°F )Output rating*PackagePart No.Packing quantityLoad voltage Load current T ube packing styleT ape and reel packing styleT ube T ape and reelPicked from the 1/2-pin side Picked from the 3/4-pin side AC/DC dual use60V500mA SOP4-pin AQY412S AQY412SX AQY412SZ 1 tube contains:100 pcs.1 batch contains:2,000 pcs.1,000 pcs.350V 120mA AQY410S AQY410SX AQY410SZ 400V100mAAQY414SAQY414SXAQY414SZItemSymbolAQY412SAQY410S AQY414S RemarksInputLED forward current I F 50 mA LED reverse voltageV R 5 V Peak forward current I FP 1 A f = 100 Hz, Duty factor = 0.1%Power dissipationP in 75 mWOutputLoad voltage (peak AC)V L 60 V 350 V 400 V Continuous load currentI L 0.5 A 0.12 A 0.1 A Peak AC, DCPeak load current I peak 1.5 A 0.3 A 0.24 A100ms (1 shot), V L = DCPower dissipationP out 300 mW T otal power dissipation P T 350 mW I/O isolation voltage V iso1,500 V ACT emperture limitsOperating T opr –40°C to +85°C –40°F to +185°F Non-condensing at low temperaturesStorageT stg–40°C to +100°C –40°F to +212°Fmm inchFEATURES1. Small SOP4-pin packageThe device comes in a super-miniature SO package 4-pin type measuring(W) 4.3×(L) 4.4×(H) 2.1 mm (W) .169×(L) .173×(H) .083 inch 2. Low on-resistanceThe AQ ❍4 series (normally closed type) has a low on-resistance.This has been achieved thanks to the built-in MOSFET processed by our proprietary method, DSD (Double-diffused and Selective Doping) method.3. Controls low-level analog signals PhotoMOS feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.4. Low-level off-state leakage current of max. 1 µATYPICAL APPLICATIONS• Power supply• Measuring instruments • Security equipment • T elephone equipment • Sensing equipment4.42.1 4.3.173.083.169RoHS compliant/Panasonic Corporation Automation Controls Business Unit /ac/e GU SOP 1 Form B (AQY41❍S)ASCTB140E 201201-T■ For Dimensions.■ For Schematic and Wiring Diagrams.■ For Cautions for Use.■ These products are not designed for automotive use.If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative.For more information.REFERENCE DATA1. Load current vs. ambient temperature characteristicsAllowable ambient temperature:–40°C to +85°C 2. On resistance vs. ambient temperature characteristicsMeasured portion: between terminals 3 and 4;LED current: 0 mA;3. Operate (OFF) time vs. ambient temperature characteristicsLED current: 5 mA; Load voltage: Max.(DC);Continuous load current: Max.(DC)/Panasonic Corporation Automation Controls Business Unit /ac/eGU SOP 1 Form B (AQY41❍S)ASCTB140E 201201-T4. Reverse (ON) time vs. ambient temperature characteristicsLED current: 5 mA; Load voltage: Max.(DC);Continuous load current: Max.(DC)5. LED operate (OFF) current vs. ambient temperature characteristicsSample: All types;Load voltage: Max.(DC);6. LED reverse (ON) current vs. ambient temperature characteristicsSample: All types;Load voltage: Max.(DC);7. LED dropout voltage vs. ambient temperature characteristicsSample: All types;8-(1). Current vs. voltage characteristics of output at MOS portionMeasured portion: between terminals 3 and 4;8-(2). Current vs. voltage characteristics of output at MOS portionMeasured portion: between terminals 3 and 4;9-(1). Off state leakage current vs. load voltage characteristicsMeasured portion: between terminals 3 and 4;LED current: 5 mA; Ambient temperature: 25°C 77°F9-(2). Off state leakage current vs. load voltage characteristicsMeasured portion: between terminals 3 and 4;LED current: 5 mA; Ambient temperature: 25°C 77°F10. Operate (OFF) time vs. LED forward current characteristicsMeasured portion: between terminals 3 and 4;Load voltage: Max.(DC); Continuous load current:11. Reverse (ON) time vs. LED forward current characteristicsMeasured portion: between terminals 3 and 4;Load voltage: Max.(DC); Continuous load current: 12-(1). Output capacitance vs. applied voltage characteristicsMeasured portion: between terminals 3 and 4;Frequency: 1 MHz;°F12-(2). Output capacitance vs. applied voltage characteristicsMeasured portion: between terminals 3 and 4;Frequency: 1 MHz;°F/分销商库存信息: PANASONICAQY410SZ AQY412S。
UNRF2A6中文资料
VCE(sat) IC
IC / IB = 10
Total power dissipation PT (mW)
100
Collector current IC (mA)
70 60 50 40 30 20 10
80
Ta = 85°C 1
60
−25°C 0.1 25°C
40
0.1 mA
20
0
0
20
40
Input voltage VIN (V)
1
0.1
1
10
100
Output current IO (mA)
2
SJH00073AED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
3 2
1 1.00±0.05
0.60±0.05
0.39+0.01 −0.03
0.15±0.05 0.05±0.03 0.35±0.01
0.25±0.05
0.25±0.05 1
■ Absolute Maximum Ratings Ta = 25°C
Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Collector current Total power dissipation Junction temperature Storage temperature Symbol VCBO VCEO IC PT Tj Tstg Rating 50 50 80 100 125 −55 to +125 Unit V V mA mW °C °C
YAV 8AD-24高精度串口采集卡技术手册DAM7452
YAV8AD-24高精度串口采集卡技术手册V1801武汉亚为电子科技有限公司DAM7452关于本手册为亚为推出的YAV8AD-24数据采集卡的用户手册，主要内容包括功能概述、8路模拟量输入功能、应用实例、性能测试、注意事项及故障排除等。
说明序号版本号编写人编写日期支持对象应用时间特别说明1 1.0郑先科2014.05RS2328AD plus采集卡2 2.0郑先科2016.01YAV8AD采集卡3 3.0郑先科2017.01YAV8AD plus采集卡2017.01适用于RS232\485\WiFi\GPRS ZIGBEE\蓝牙\433M无线4 4.0李雪2017.08YA V8AD-24采集卡目录0.快速上手 (1)产品包装内容 (1)应用软件 (1)接口定义 (1)⏹端子排列 (1)⏹端子描述 (2)通信 (3)采集卡指示灯 (3)1.产品概述 (3)技术指标 (3)⏹模拟信号输入 (4)⏹通信总线 (4)⏹供电 (5)⏹温度参数 (5)硬件特点 (5)原理框图 (6)机械规格 (7)2.采集卡信号接线 (8)AI模拟量接线 (8)DI数字量接线 (8)DO数字量接线 (9)3.模拟量输入功能 (10)模拟量输入 (10)输入采样原理 (10)输入接线 (10)采样值计算 (11)⏹无符号整型 (11)⏹24位精度采集值的计算方法 (11)⏹模拟量值 (12)4.通信协议 (13)MODBUS-RTU通信协议 (13)5.应用实例 (16)采集卡连接 (16)软件功能 (17)软件应用 (17)⏹亚为串口采集卡通用采集平台 (18)⏹LabVIEW (18)⏹MODBUS RTU通信 (19)6.注意事项及故障排除 (19)注意事项 (19)⏹存储说明 (19)⏹出货清单 (19)⏹质保及售后 (20)⏹特别说明 (20)故障排除 (21)⏹无法正常采集数据 (21)⏹VI文件打不开 (21)⏹多卡不识别 (22)⏹不显示波形 (22)⏹采集速度不够 (22)软件弹出错误 (22)7.性能测试 (22)安全规范 (22)耐电压范围测试 (23)环境适应性测试 (23)8.文档权利及免责声明 (24)9.联系方式.........................................................................................................................错误！未定义书签。
A694B-2G中文资料
元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet3.0mm Round Type LED Lamps A694B/2G█ Features :● ● ●Low power consumption High efficiency and low cost Good control and free combinations on the colors of LED lamps Good lock and easy to assembly Stackable and easy to assembly Stackable vertically and easy to assembly Versatile mounting on P.C board or panel Stackable horizontally and easy to assembly Pb free The product itself will remain within RoHS compliant version.● ● ● ● ● ● ●█ Descriptions :● ●ARRAY=Plastic Holder+Combinations of Lamps The array will easily mount the applicable lamps on any panel up to█ Applications :●ed as indicators of indicating the Degree, Functions, Positions etc, in electronic instruments.PART NO. 234-10GDChip Material GaP Emitted Color GreenLens ColorGreen DiffusedEVERLIGHT ELECTRONICS CO.,LTD. Device Number : CDAE-069-019http : // Prepared daREV.:4Page: 1 of 62005/8/26Prepared by:Weixiong Long元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet 3.0mm Round Type LED LampsA694B/2GPackage DimensionsNotes: 1.All dimensions are in millimeters, tolerance is 0.25mm except being specified2.Lead spacing is measured where the lead emerge from the package█ Absolute Maximum Ratings at Ta = 25℃Parameter Forward Current Operating Temperature Storage Temperature Soldering Temperature Power Dissipation Peak Forward Current Reverse Voltage Symbol IF Topr Tstg Tsol Pd IF(Peak) VR Rating 30 -40 to +85 -40 to +100 260 ± 5 100 60 5 Unit mA ℃ ℃ ℃ mW mA VNote: *1:I FP Conditions --Pulse Width ≦ 1msec and Duty ≦ 1/10. *2:Soldering time ≦ 5 seconds.EVERLIGHT ELECTRONICS CO.,LTD. Device Number : CDAE-069-019 http : // Prepared date: 2005/8/26 REV.: 4 Page: 2 0f 6Prepared by:Weixiong Long元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet 3.0mm Round Type LED LampsA694B/2GElectro-Optical Characteristics (Ta=25℃)Parameter Forward Voltage Reverse Current Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Symbol VF IR Iv 2θ1/2 λp λd △λ Condition IF= VR= IF= IF= IF= IF= IF= 20 5 20 20 20 20 20 mA V mA mA mA mA mA Min. 1.7 ／ 4.0 ／ ／ ／ ／ Typ. 2.1 ／ 10 60 565 570 30 Max. 2.4 10 ／ ／ ／ ／ ／ Unit V μA mcd deg nm nm nmEVERLIGHT ELECTRONICS CO.,LTD. Device Number : CDAE-069-019http : // Prepared date: 2005/8/26REV.: Prepared by:4Page: 3 of 6Weixiong Long元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet 3.0mm Round Type LED LampsA694B/2G Typical Electro-Optical Characteristic Curves:█EVERLIGHT ELECTRONICS CO.,LTD. Device Number : CDAE-069-019http : // Prepared date: 2005/8/26REV.:4Page: 4 of 6Prepared by: Weixiong Long元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet 3.0mm Round Type LED LampsA694B/2G█Reliability test items and conditions:Test Sample Ac/Re Hours/Cycle Size SEC 76 PCS 0/1NO 1Item Solder HeatTest Conditions TEMP : 260℃ ± 5 ℃ H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min TEMP : 100℃2Temperature Cycle300 CYCLES 76 PCS0/13Thermal Shock300 CYCLES 76 PCS0/14High Temperature Storage1000 HRS76 PCS0/15Low Temperature StorageTEMP : -40℃ TEMP : 25℃ IF = 20mA 85℃ / 85% RH1000 HRS76 PCS0/16 7DC Operating Life High Temperature / High Humidity1000 HRS 1000 HRS76 PCS 76 PCS0/1 0/1EVERLIGHT ELECTRONICS CO.,LTD.http : // Prepared date: 2005/8/26REV.:4Prepared by:Page: 5 of 6 Weixiong LongDevice Number :CDAE-069-019元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet 3.0mm Round Type LED LampsA694B/2GPacking Quantity Specification1. 270PCS/1Plate，4Plates/1Box 2. 10Boxes/1CartonLabel Form SpecificationCPN: Customer’s Production Number P/N : Production Number QTY: Packing QuantityRoHSCAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production PlaceA694B/2GNotes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT ’sconsent.EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: (886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\EVERLIGHT ELECTRONICS CO.,LTD.http : // Prepared date: 2005/8/26REV.: Prepared by:4Page: 6 0f 6 Weixiong LongDevice Number :CDAE-069-019。
D4GL-2FFA-A;D4GL-2DFG-A;D4GL-4HFG-A;D4GL-4DFG-A;中文规格书,Datasheet资料
D4GL Door-mounting Accessory with Lockout Key to Prevent Workers from Becoming Trapped inside Hazardous Area•The vertical D4GL Guard Lock Safety-door Switch can be easily mounted on 40 × 40 mm aluminum frames. •The plastic material makes the Slide Key suitable for lightweight doors.ConfigurationD4GL-SK10-LKBe sure to read the “Safety Precautions” on page 5 and the “Precautions for All Safety Door Switches”.D4GL (sold separately)D4GL-SK10-LKFeaturesThe lockout key prevents workers from becoming trapped without using a padlock.Note:Using two-color LEDs enables confirming whether the door is open or closed and locked or unlocked.Example: D4GL-2DFA-A with mechanical lock and solenoid releaseClo s e door.Locked (power notsu pplied to s olenoid)The s lide h a ndle i s clo s ed.Clo s e door.Locked (power not su pplied to s olenoid)The s lide h a ndle i s clo s ed.The s lide h a ndle c a n b e p u lled.Open door.The s lide h a ndle i s open.When the s lide h a ndle i s open, the locko u t key c a n b e p u lled reg a rdle ss of whether power i s b eing su pplied to the s olenoid or not.Open door.The s lide h a ndle i s open.Left doorDoor Opening to the Left.The s lide h a ndle i s s ec u red a t the po s ition s hown in the fig u re.A worker holding the locko u t key will not b e tr a pped locked in s ide the h a z a rdo us a re a b y a nother per s on.Open door.The s lide h a ndle doe s not move.The s lide h a ndle i s open.If the locko u t key i s not mo u nted, the s lide h a ndle will not move a nd the door will not clo s e.Locko u t KeyDo not t u rn the key as in the fig u re ab ove if the s lide h a ndle i s clo s ed.The h a ndle-s h a ped fixt u re m a ke s it e as y to us e the Door S witch.Att a ch the su ppliedc au tion l ab el s for di s pl a y.Ordering InformationNote:1.The Door Switch is not included. Select the Door Switch depending on the necessary number of contacts and the conduit size.The contents are provided as a total set, individual contents cannot be ordered separately.2.Perform risk assessment for the equipment in question, configure relay units and other safety circuits, and use properly.Applicable Door SwitchesAppearanceSpecificationsContentsModelApplicable Door SwitchWeight: Approx. 0.6 kg Mechanical durability: 20,000 operations min.Slide Key: 1 (not yet mounted)D4GL mounting plate: 1Door Switch special mounting screws: 4D4DS-K1 (operation key): 1D4DS-K1 special mounting screws: 2Lockout keys: 2Lockout key strap: 1Caution labels (stickers): 2 sheets (Englishand Japanese)D4GL-SK10-LK D4GL•The two-color (orange/green) LED indicators enablechecking whether the door is locked and the key is inserted.•With gold-plated contacts used as standard, general loads and microloads are supported.Guard LockSafety-door SwitchD4GLList of ModelsRelease key typeSolenoid voltage and indicator typeLock and release typesContact configuration(door open/closed detection switch andlock monitor switch contacts)Conduit opening Model StandardSolenoid: 24 VDC Orange/green LED: 24 VDCMechanical lock, Solenoid release1NC/1NO+1NC/1NOPg13.5D4GL-1AFA-A G1/2D4GL-2AFA-A M20D4GL-4AFA-A 1NC/1NO+2NCPg13.5D4GL-1BFA-A G1/2D4GL-2BFA-A M20D4GL-4BFA-A 2NC+1NC/1NOPg13.5D4GL-1CFA-A G1/2D4GL-2CFA-A M20D4GL-4CFA-A 2NC+2NCPg13.5D4GL-1DFA-A G1/2D4GL-2DFA-A M20D4GL-4DFA-A 2NC/1NO+1NC/1NOPg13.5D4GL-1EFA-A G1/2D4GL-2EFA-A M20D4GL-4EFA-A 2NC/1NO+2NCPg13.5D4GL-1FFA-A G1/2D4GL-2FFA-A M20D4GL-4FFA-A 3NC+1NC/1NOPg13.5D4GL-1GFA-A G1/2D4GL-2GFA-A M20D4GL-4GFA-A 3NC+2NCPg13.5D4GL-1HFA-A G1/2D4GL-2HFA-A M20D4GL-4HFA-A Solenoid lock,Mechanical release1NC/1NO+1NC/1NOPg13.5D4GL-1AFG-A G1/2D4GL-2AFG-A M20D4GL-4AFG-A 1NC/1NO+2NCPg13.5D4GL-1BFG-A G1/2D4GL-2BFG-A M20D4GL-4BFG-A 2NC+1NC/1NOPg13.5D4GL-1CFG-A G1/2D4GL-2CFG-A M20D4GL-4CFG-A 2NC+2NCPg13.5D4GL-1DFG-A G1/2D4GL-2DFG-A M20D4GL-4DFG-A 2NC/1NO+1NC/1NOPg13.5D4GL-1EFG-A G1/2D4GL-2EFG-A M20D4GL-4EFG-A 2NC/1NO+2NCPg13.5D4GL-1FFG-A G1/2D4GL-2FFG-A M20D4GL-4FFG-A 3NC+1NC/1NOPg13.5D4GL-1GFG-A G1/2D4GL-2GFG-A M20D4GL-4GFG-A 3NC+2NCPg13.5D4GL-1HFG-A G1/2D4GL-2HFG-A M20D4GL-4HFG-ADimensions(Unit: mm)mounting holesD4GL-SK10-LK (Close door.)40 ×Safety PrecautionsRefer to the “Precautions for All Switches” and “Precautions for All Safety Door Switches”.•Do not drop the Product. Doing so may prevent the Product from functioning to full capacity.•Mount the Product securely to prevent it from falling. Otherwise, injury may occur.•Do not attempt to disassemble or modify the Switch. Doing so may cause the Switch to malfunction.•Make sure that the gap between the shot bolt and the guide is ±0.5 mm. Otherwise, excessive wear or damage may cause malfunction.•To ensure safety, do not operate the Switch with anything other than the Slide Key Unit.•Your hand may be injured by being pinched between the Operation Key and Switch when closing the door with your hand on the Product.•Be careful to avoid pinching your hand when operating the Slide Handle.•Do not impose a force of exceeding 1 N·m when operating the Lockout Key. Otherwise, the Product may be damaged and may not operate properly.To prevent damage, attach the supplied labels for display near the Product.•Do not force the slide handle to move when the lockout key is not inserted. Doing so may damage the product and make operation impossible.•Do not force the slide handle to move when the door is locked. •Do not close the door with the shot bolt removed. Doing so may damage the product and make operation impossible.•Turn the Lockout Key to the "SLIDE LOCK" position and remove it when opening the door to prevent a third party from operating the Slide Handle.•The durability of the Switch varies considerably depending on the switching conditions. Always confirm the usage conditions by using the Switch in an actual application, and use the Switch only for the number of switching operations given in the performance specifications.•The user must not maintain or repair equipment incorporating the Switch. Contact the manufacturer of the equipment for any maintenance or repairs required.•Refer to the D4GL Guard Lock Safety-door Switch Datasheet and Instruction Sheet about storage conditions, ambient conditions, Switch details, and handling methods.•Do not apply excessive force in the direction of the slide. This may damage the product and cause it to malfunction.•Do not force the switch or cable. Thismay damage the product. The cableshould be fixed at a point separatefrom the switch.•This product is for D4GL Guard Lock Safety-door Switch only. This product cannot be used with any other manufacturer's doorswitches.•Use the Slide Handle in the direction A or B in the following figure.•Loose screws may result in malfunction. Use washers and tighten the screws to the specified torques. Mount the Slide Base at four points with screws. Adding adhesive is recommended forpreventing the screws from loosening.Also, when mounting the Product to a door for disable-prevention purposes, purchase and use tamper-resistant screws. Appropriate Tightening TorqueTechnical Specifications•Do not store the Switch where corrosive gases (e.g., H2S, SO2,NH3, HNO3 or Cl2) or dust is present, or in locations subject to hightemperature or humidity.•Perform maintenance inspections periodically.•When the lockout key is attached to your wrist, be careful that thestrap does not get stuck in equipment.Do not use this product mounted so that it slidesvertically. This may cause malfunction, resulting inpersonal injury.Do not insert the operation key with the door open.Devices may start to operate, resulting in injury.Precautions for Safe UsePrecautions for Correct UseSlide Key mounting screw (M6) 6.0 to 7.0 N·mOperation key special mounting screw (screws supplied) 2.4 to 2.8 N·mSwitch special mounting screw (screws supplied) 1.3 to 1.5 N·mAmbient operating temperature−10 to 55°C (with no icing)Ambient operating humidity95% max.Mechanical durability20,000 operations min.WeightApprox. 0.6 kg (not including D4JL GuardLock Safety-door Switch)NomenclatureDifferences between Lockout Key and Trapped Key (Reference)•When mounting the operation key, line up the inside edges of the long operation key holeswith the outer edges of the slidehandle as in the following figure to ensure easy position adjustment.•Use the supplied special screws to mount the operation key and D4GL Guard Lock Safety-door Switch.To tighten the screws, use the tip of a flat-head screwdriver on the screw heads as shown in the following figure.•The special screws cannot be removed once they are tightened.Lockout keyTrapped key(Refer to information on theD4JL-@@@A-@7-@@)Closing the doorThe door cannot be closed unless the lockout key is inserted in the slide and turned.The door cannot be closed unless the trapped key is inserted in the Switch and turned.Opening the door The door can be opened bysupplying power to the Switch solenoid without operating thelockout switch.The door can never be opened without both supplying power to the Switch solenoid andoperating the trapped key.G L Note:designed so that they cannot be turnedcounter-clockwise using a flat-head screwdriver.Read and Understand This CatalogPlease read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions orcomments.WARRANTYOMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON.OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.LIMITATIONS OF LIABILITYOMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESSOMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOTSUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.SUITABILITY FOR USEOMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products.At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use.The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:•Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.•Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations.•Systems, machines, and equipment that could present a risk to life or property.Please know and observe all prohibitions of use applicable to the products.NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.PROGRAMMABLE PRODUCTSOMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.CHANGE IN SPECIFICATIONSProduct specifications and accessories may be changed at any time based on improvements and other reasons.It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actualspecifications of purchased products.DIMENSIONS AND WEIGHTSDimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.PERFORMANCE DATAPerformance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.ERRORS AND OMISSIONSThe information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,typographical, or proofreading errors, or omissions.2010.3In the interest of product improvement, specifications are subject to change without notice. OMRON CorporationIndustrial Automation Company/(c)Copyright OMRON Corporation 2010 All Right Reserved.分销商库存信息:OMROND4GL-2FFA-A D4GL-2DFG-A D4GL-4HFG-A D4GL-4DFG-A。
日搏变频器说明书
目录一、注意事项 (3)1.1、安全信息的标志和定义 (3)1.2、注意事项 (3)1.3、保养与维护 (4)1.4、报废时注意事项 (4)二、产品简介 (5)2.1、变频器铭牌说明 (5)2.2、变频器型号说明 (5)2.3、变频器型号说明 (6)2.4、技术规范 (7)三、安装接线 (8)3.1、变频器的安装 (8)3.2、变频器标准接线图 (8)3.3、主回路端子和说明 (9)3.4、控制端子及说明 (11)四、操作运行 (13)4.1、面板结构说明 (13)4.2、按键说明 (13)4.3、参数设置 (14)4.4、LED显示说明 (14)4.5、状态指示灯说明 (14)4.6、变频器的各种状态 (15)五、功能参数说明 (16)5.1 功能速查表 (16)5.2 参数详解 (26)5.2.1、基本参数区 (26)5.2.2、起停控制参数区 (30)5.2.3、电机参数区 (32)5.2.4、矢量控制参数区 (33)5.2.5、V/F控制参数区 (34)5.2.6、输入端子参数区 (35)5.2.7、输出端子参数区 (39)5.2.8、人机界面参数区 (41)5.2.9、增强参数区 (43)5.2.10、PID参数区 (46)5.2.11、多段速参数区 (48)5.2.12、保护和故障参数区 (49)5.2.13、485参数区 (51)5.2.14、补充参数区 (53)5.2.15、FE厂家参数区 (54)六、选件/附件 (55)七、故障检查与排除 (59)7.1、故障信息及排除方法 (59)7.2、常见故障及其处理方法 (60)一、注意事项1.1安全信息的标志和定义本手册有三种标志定义，请在完全熟悉下面的图标和意义，并务必遵守所标明的注意事项，然后继续阅读本手册。
危险表示没有按要求操作可能造成死亡和重伤事故。
禁止表示绝对不可以做的事情。
注意表示在操作使用过程中需要注意的事项。
1.2 注意事项1.3保养与维护1.4报废注意事项二、产品简介2.1变频器铭牌说明在变频器的右侧下方，贴有表示变频器型号及额定值的铭牌，名牌内容如图2-1所示：图2-12.2变频器型号说明变频器的型号说明如图2-2所示：图2-22.3三相变频器系列机型2.4技术规范表2-2三、安装接线3.1变频器的安装:RB3000有壁挂式和落地式两种,安装应保证足够的通风距离,如图3-1所示:大于120mm大于120mm 壁挂式大于50mm大于50mmRB3000落地式图3-13.2标准接线图:图3-2（适用于18.5KW以下机型）图3-3（适用于22KW以上机型）3.3主回路端子和说明:3.3.1主回路端子示意图:+（适用于7.5KW以下产品）（适用于11KW～18.5KW）s（适用于22KW～45KW）（适用于55KW～110KW）（适用于132KW～200KW）（适用于200KW以上）3.3.2主回路端子功能说明:表3-13.4控制端子及说明：3.4.1端子分布如图3-3所示:图3-43.4.2控制端子功能说明:表3-2四、操作运行4.1面板结构说明，如下图4-1所示：图4-1 4.2按键说明,见表4-1：表4-14.3参数设置：本变频器的参数设置过程如图4-2所示图4-2码（被选中的的位闪烁），进入参数编辑状态，并显示当前参数值，（被选中的的位闪烁，若参数没有闪烁位，表示该功能码不能修改），修改完毕，保存修改后的参数到变频器内，自动返回到功能码编辑状态，如果需要修改多个参数，重复上面的操作4.4 LED 显示说明：5位LED 显示，可显示设定频率、输出频率等各种监视数据以及报警代码 4.5 状态指示灯说明：4.5 电机参数自学习选择无PG矢量控制运行方式,在变频器运行前，必须准确输入电机的铭牌参数，RB3000系列变频器据此铭牌参数匹配标准电机参数；矢量控制方式对电机参数依赖性很强，要获得良好的控制性能，必须获得被控电机的准确参数。
AW824BPT BET 蓝牙模块 Datasheet说明书
AW824BPT/BET蓝牙模块DS01010101 1.0.02 Date:2020/12/31—————————————— 概述 AW824BPT/BET 是广州立功科技股份有限公司开发的一款基于QN9021和LPC824的BLE 二次开发模块，是简单、快捷、高效的BLE 开发方案。
—————————————— 产品特性 工作电压 3.0V~3.6V （拥有高精度ADC 参考源Vref ）；工作电压2.8V~3.6V （参考源Vref 精度要求不高）；发射功率：-20dbm~4dbm 通过AT 指令可调；接收灵敏度 -93dbm ；高达50kbps 数据传输速率；32位ARM Cotex-M0 + 处理器； 32KB 片内Flash ，8KB 片内SRAM ； 支持蓝牙透传功能； 支持ADC 、SPI 、I2C 、UART 、PWM ； 内置高精度ADC 参考源Vref ； 降低高精度ADC 外围设计难度； 支持蓝牙4.0———————————— 产品应用 ◆ 汽车电子； ◆ 智能家居； ◆ 医疗设备； ◆ 仪器仪表；◆ 休闲玩具；———————————————————————————————— 典型应用©2020 Guangzhou ZLG Technology Corp.,Ltd.修订历史目录1. 产品简介 (1)1.1产品概述 (1)1.2产品特性 (1)1.3订购信息 (1)2. 引脚功能 (3)2.1引脚分布 (3)2.2引脚说明 (3)3. 电气特性 (7)3.1绝对最大额定值 (7)3.2功耗参数 (7)3.3工作条件 (7)3.4无线参数 (8)4. 典型应用电路 (9)5. 天线布局规范 (10)5.1板载天线布局注意事项 (10)5.2外接天线布局注意事项 (10)6. 封装尺寸 (11)7. 包装信息 (13)8. 生产指导 (15)8.1存储与运输 (15)8.2湿敏等级 (15)8.3回流焊温度参考曲线 (15)9. 免责声明 (17)1. 产品简介1.1 产品概述AW824BPT/BET蓝牙核心模块是广州立功科技股份有限公司基于NXP的蓝牙4.0 BLE 芯片和MCU芯片LPC824开发的一款低功耗、高性能，支持二次开发的蓝牙4.0 BLE模块。
RB425DT146;中文规格书,Datasheet资料
CAPACITANCE BETWEEN TERMINALS:Ct(pF)
1000
10
0.01 0 100 200 300 400 500 600 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS
1 0 10 20 30 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS
0A 0V DC
Io t T VR D=t/T VR=15V Tj=125℃
FORWARD POWER DISSIPATION:Pf(W)
0.05 0.04 0.03 0.02 0.01 DC Sin(θ＝180) D=1/2
0.06 0.04 0.02 0 0 0.1 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 0.2 Sin(θ＝180)
Data Sheet
Schottky Barrier Diode
RB425D
Applications Low power rectification Dimensions (Unit : mm) Land size figure (Unit : mm)
1.9
2.8±0.2
1.6－0.1
Features 1) Small mold type. (SMD3) 2) Low IR 3) High reliability.
470
310 D1
30 D2
FORWARD VOLTAGE:VF(mV)
FORWARD VOLTAGE:VF(mV)
460 450 440 430 AVE:439.5mV 420