RA45H7687M1中文资料
45系列制动传感器产品数据手册说明书
Technical DataFork SensorsCatalog Numbers 45LSP-2LNA1-P3, 45LSP-2LPA1-P3, 45LSP-2LNA2-P3, 45LSP-2LPA2-P3, 45LSP-2LNA3-P3, 45LSP-2LPA3-P3, 45LSP-2LNA4-P3, 45LSP-2LPA4-P3, 45LST-1LEA1-P4, 45LST-1LEA2-P4, 45LST-1LEA3-P4, 45LST-1LEA4-P4, 45LST-1LEA5-P4, 45LST-1LEA6-P4, 45LST-1LEA7-P4Plastic Fork SensorsFeaturesThe 45LSP plastic fork sensors include the following features:•Detection of objects as small as 0.2 mm (0.08 in.)•Highly visible power and output LED indicators with output indication along both sides of the fork •Remote teach and teach button lock on 4-pin models•Selectable light or dark operate•Multiple mounting options: through-holes, threaded holes, and dovetail•Easy installation with no alignment required •IP67 rated enclosureTopicPagePlastic Fork Sensors 1Features 1Product Selection 2User Interface Panel 2Wiring Diagrams 2Approximate Dimensions3Optical and Response Time Characteristics 3Metal Fork Sensors 4Features 4Product Selection 4User Interface Panel 4Wiring Diagrams 4Dimensions5Optical and Response Time Characteristics 5Specifications6Fork SensorsTable 1 - Product Selection(1)Connection Options: The -P3 suffix describes a 3-pin pico (M8) integral QD. For additional connection options, replace the -P3 suffix with -P4: For a 4-pin pico (M8) integral QD connection (for example, 45LSP-2LPA1-P4). Table 2 - User Interface PanelWiring Diagrams* R emote teach2Rockwell Automation Publication FORK-TD001A-EN-P - May 2018Rockwell Automation Publication FORK-TD001A-EN-P - May 20183Fork SensorsApproximate Dimensions[mm (in.)]Optical and Response Time CharacteristicsGap Size (mm)A B C D E F G 3030 (1.18)50 (1.97)30 (1.18)34 (1.34)59.5 (2.34)20 (0.79)—5050 (1.97)70 (2.76)50 (1.97)54 (2.13)79.5 (3.13)20 (0.79)28 (1.10)8080 (3.15)100 (3.93)80 (3.15)54 (2.13)79.5 (3.13)20 (0.79) 2 x 28120120 (4.72)140 (5.51)120 (4.72)54 (2.13)79.5 (3.13)20 (0.79)3 x 28Characteristic 45LSP Plastic Fork 30 mm50 mm 80 mm 120 mm Resolution 0.2 mm (0.008 in.)0.4 mm (0.016 in.)Light Source Visible red LED 640 nmResponse Time0.25 ms4Rockwell Automation Publication FORK-TD001A-EN-P - May 2018Fork SensorsMetal Fork SensorsFeaturesThe 45LST Metal Fork Sensors include the following features:•Multi-turn sensitivity adjustment allows for high-precision adjustment •Fast 30 µs response time for selected models•NPN or PNP push-pull output helps streamline product inventory •Industrial aluminum housing •IP65 rated enclosureTable 3 - Product SelectionTable 4 - User Interface PanelWiring Diagrams*White wire not used.Rockwell Automation Publication FORK-TD001A-EN-P - May 20185Fork SensorsDimensions[mm (in.)]Optical and Response Time CharacteristicsAccessoriesA (Fork Size)BCD 2 (0.08)40 (1.57)14 (0.55) 6.25 (0.25)15 (0.59)40 (1.57)27 (1.06) 6.25 (0.25)30 (1.18)40 (1.57)42 (1.65) 6.25 (0.25)50 (1.97)57 (2.24)40 (1.57)17.25 (0.68)80 (3.15)57 (2.24)70 (2.75)17.25 (0.68)120 (4.72)57 (2.24)110 (4.33)17.25 (0.68)225 (8.86)60 (2.36)——Characteristic 45LST Metal Fork [mm (in.)]2 mm 15, 30, 50, 120, and 225 mm Resolution ——Light Source Infrared non-modulatedResponse Time0.03 ms 1 msDescriptionCatalog Number Pico style QD cordset, 3-pin889P-F3AB-2Dovetail Bracket used for Background and Foreground Suppression Sensors 44B44B-BKT6Rockwell Automation Publication FORK-TD001A-EN-P - May 2018Fork SensorsSpecificationsAdditional ResourcesThese documents contain additional information concerning related products from Rockwell Automation.Y ou can view or download publications at /global/literature-library/overview.page . T o order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.Attribute45LSP Plastic Fork 45LST Metal ForkCertifications c-UL-us Listed and CE Marked for all applicable directivesVibration 10…55 Hz, 1 mm (0.04 in.) amplitude, meets or exceeds IEC|600947-5-2Shock 30 g with 1 ms pulse duration, meets or exceeds IEC 600947-5-2 Environmental Enclosure type rating IP67IP65Operating temperature -10…+60 °C (14…140 °F)-20…+60 °C (-4…+140 °F)User Interface Sensitivity adjustment Push button 25-turn potentiometer Indicator LEDs Green and orange LEDs Green and red LEDsElectrical Operating voltage 10…30V DC Current consumption 30 mA40 mA maxProtection type Short circuit, reverse polarity, false pulse, overload Outputs Response time 0.25 ms1 ms, 0.03 ms (45LST-1LEA1-P4)Output type (1)(1)For Output Type and Connection Type, see Product Selection .Push-pull output (NPN or PNP)Output function Selectable light or dark operate Load current 100 mA Leakage current 0.5 mA max—Mechanical Housing material PolycarbonateAnodized aluminum Connection type(1)4-pin pico (M8) integral QDResourceDescriptionIndustrial Automation Wiring and Grounding Guidelines, publication 1770-4.1Provides general guidelines for installing a Rockwell Automation industrial system.Product Certifications website, /global/certification/overview.pageProvides declarations of conformity, certificates, and other certification details.Fork Sensors Notes:Rockwell Automation Publication FORK-TD001A-EN-P - May 20187Allen-Bradley, Rockwell Software, Rockwell Automation, and LISTEN. THINK. SOLVE are trademarks of Rockwell Automation, Inc.Trademarks not belonging to Rockwell Automation are property of their respective companies.Publication FORK-TD001A-EN-P - May 2018Copyright © 2018 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.Rockwell Automation SupportUse the following resources to access support information.Documentation FeedbackY our comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete theHow Are W e Doing? form at /idc/groups/literature/documents/du/ra-du002_-en-e.pdf .Technical Support Center Knowledgebase Articles, How-to Videos, FAQs, Chat, User Forums, and Product Notification Updates./knowledgebaseLocal Technical Support Phone Numbers Locate the phone number for your country./global/support/get-support-now.pageDirect Dial Codes Find the Direct Dial Code for your product. Use the code to route your call directly to a technical support /global/support/direct-dial.page Literature Library Installation Instructions, Manuals, Brochures, and Technical Data./literatureProduct Compatibility and Download Center(PCDC)Get help determining how products interact, check features and capabilities, and find associated /global/support/pcdc.pageRockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, T el: +90 (216) 5698400Rockwell Automation maintains current product environmental information on its website at /rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page .Rockwell Automation SupportUse the following resources to access support information.Documentation FeedbackY our comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the How Are W e Doing? form at /idc/groups/literature/documents/du/ra-du002_-en-e.pdf .Technical Support Center Knowledgebase Articles, How-to Videos, FAQs, Chat, User Forums, and Product Notification /knowledgebaseLocal Technical Support Phone Numbers Locate the phone number for your /global/support/get-support-now.page Direct Dial Codes Find the Direct Dial Code for your product. Use the code to route your call directly to a technical support /global/support/direct-dial.page Literature Library Installation Instructions, Manuals, Brochures, andTechnical /literature Product Compatibility and Download Center(PCDC)Get help determining how products interact, check features and capabilities, and find associated firmware./global/support/pcdc.pageWaste Electrical and Electronic Equipment (WEEE)At the end of life, this equipment can be collected separately from any unsorted municipal waste.。
D45H11;中文规格书,Datasheet资料
D45H11 — PNP Power Amplifier© 2012 Fairchild Semiconductor Corporation D45H11 Rev. A11June 2012D45H11PNP Power Amplifier•This device is designed for power amplifier, regulator and switching circuits where speed is important.•Sourced from process 5Q.Absolute Maximum RatingsElectrical Characteristics T a = 25°C unless otherwise notedThermal Characteristics T a = 25°C unless otherwise noted* Note) Device mounted on FR-$ PCB 36mm*18mm*1.5mm: Mounting pad for the collector lead min. 6cm2.SymbolParameterValueUnitsV CEO Collector-Emitter Voltage-80V I C Collector Current - Continuous-10A T J , T STGOperating and Storage Junction Temperature Range-55 to +150°CSymbolParameter Test Condition Min.Max.UnitsOff Characteristics V (BR)CEO Collector-Emitter Breakdown Voltage I C = -100mA, I B = 0-80V I CBO Collector-Cutoff Current V CB = -80V, I E = 0-10μA I EBO Emitter-Cutoff Current V EB = -5V, I C = 0-100μAOn Characteristics *h FE DC Current GainV CE = -1V, I C = -2A V CE = -1V, I C = -4A 6040V CE (sat)Collector-Emitter Saturation Voltage I C = -8A,I B = -0.4A -1.0V V BE (sat)Base-Emitter Saturation Voltage I C = -8A,I B = -0.8A -1.5V V BE (on)Base-Emitter On Voltage V CE = -2V, I C = -10mA -0.54-0.65V Small Signal Characteristicsf TCurrent Gain Bandwidth ProductI C = -500mA, V CE = -10V40MHZSymbolParameterMax.UnitsP D Total Device DissipationDerate above 25°C60480W mW/°C R θJC Thermal Resistance, Junction to Case 2.1°C/W R θJAThermal Resistance, Junction to Ambient62.5°C/W1TO-2201. Base2. Collector3. EmitterMark: D45H11The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is notAX-CAP¥*BitSiC¥Build it Now¥CorePLUS¥CorePOWER¥CROSSVOLT¥CTL¥Current Transfer Logic¥DEUXPEED®Dual Cool™ EcoSPARK®EfficientMax¥ESBC¥®Fairchild®Fairchild Semiconductor®FACT Quiet Series¥FACT®FAST®FastvCore¥FETBench¥FlashWriter®*FPS¥Global Power ResourceGreenBridge¥Green FPS¥Green FPS¥ e-Series¥G max¥GTO¥IntelliMAX¥ISOPLANAR¥Making Small Speakers Sound Louderand Better™MegaBuck¥MICROCOUPLER¥MicroFET¥MicroPak¥MicroPak2¥MillerDrive¥MotionMax¥Motion-SPM¥mWSaver¥OptoHiT¥OPTOLOGIC®OPTOPLANAR®®Programmable Active Droop¥QFET®QS¥Quiet Series¥RapidConfigure¥¥Saving our world, 1mW/W/kW at a time™SignalWise¥SmartMax¥SMART START¥Solutions for Your Success¥SPM®STEALTH¥SuperFET®SuperSOT¥-3SuperSOT¥-6SuperSOT¥-8SupreMOS®SyncFET¥Sync-Lock™®*The Power Franchise®TinyBoost¥TinyBuck¥TinyCalc¥TinyLogic®TINYOPTO¥TinyPower¥TinyPWM¥TinyWire¥TranSiC¥TriFault Detect¥TRUECURRENT®*P SerDes¥UHC®Ultra FRFET¥UniFET¥VCX¥VisualMax¥VoltagePlus¥XS™* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which, (a)are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, orsystem whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.ANTI-COUNTERFEITING POLICYFairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, , under Sales Support.Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.PRODUCT STATUS DEFINITIONSDefinition of TermsDatasheet Identification Product Status DefinitionAdvance Information Formative / In DesignDatasheet contains the design specifications for product development. Specifications may change分销商库存信息: FAIRCHILDD45H11。
345 电能质量钳表 用户手册 (简体中文)说明书
®345Power Quality Clamp Meter用户手册(Simplified Chinese)October 2006© 2006 Fluke Corporation. All rights reserved.Product names are trademarks of their respective companies.有限担保和有限责任Fluke担保在正常使用和保养的情况下，其产品没有材料和工艺上的缺陷。
担保期为从购买产之日起的一年内。
部件、产品修理和服务的担保期限为90天。
本担保仅限于Fluke授权零商的原购买人或最终用户，并且不适用于一次性电池、电缆接头、电缆绝缘接头或Fluke认为于误用、改装、疏忽、污染及意外或异常操作或处理引起的任何产品损坏。
Fluke担保软件依照功能规格正常运行90天，并且软件是记录在无缺陷的媒介上。
Fluke并不担保软件无错或在运行中不会中断。
Fluke授权的零售商应仅对最终用户就新的和未使用的产品提供本担保，但无权代表Fluke公司提供额外或不同的担保。
只有通过Fluke 授权的销售店购买的产品或买方已经按适的国际格付款才能享受Fluke的担保支持。
在一国购买的产品需在他国修理时，Fluke有权向买方求负担重大修理/零件更换费用。
Fluke的担保为有限责任，由Fluke决定是否退还购买金额、免费修理或更换在担保期间退还Fluke授权服务中心的故障产品。
如需要保修服务，请与您就近的Fluke授权服务中心联系，获得退还授权信息；然后将产品寄至务中心并附上产品问题描述，同时预付运费和保险费（目的地离岸价格）。
Fluke不承担运途中发生的损坏。
在保修之后，产品将被寄回给买方并提前支付运输费（目的地交货）。
如果Fluke认定产品故障是由于疏忽、误用、污染、修改、意外或不当操作或处理状况而产生包括未在产品规定的额定值下使用引起的过压故障；或是由于机件日常使用损耗，则Fluke会估算修理费用，在获得买方同意后再进行修理。
里氏硬度计说明书
里氏硬度计说明书篇一：TH110A里氏硬度计使用说明书TH110A里氏硬度计使用说明书1 概述 ................................................ ................................................... . (3)1.1 产品特点 ................................................ ................................................... .. 31.2 主要用途及适用范围 ................................................ (3)1.2.1主要用途................................................. (3)1.2.2适用范围................................................. ...................................................31.3 品种规格 ................................................ ................................................... .. 41.4 工作条件 ................................................ ................................................... .. 41.5 注意事项 ................................................ ................................................... .. 42 结构特征与工作原理................................................. (5)2.1结构特征 ................................................ ................................................... (5)2.1.1硬度计 ................................................ (5)2.1.2 主机 ................................................ ................................................... . (5)2.1.3 D型冲击装置 ................................................ (6)2.1.4 异型冲击装置 ................................................ .. (6)2.2工作原理 ................................................ ................................................... (6)3 技术特性 ................................................ ................................................... (7)4 仪器使用 ................................................ (8)4.1 使用前的准备和检查 ................................................ (8)4.1.1被测试样的要求 ................................................ .. (8)4.1.2仪器系统设置................................................. .. (8)4.1.3测量条件设置................................................. .. (8)4.2 测量方法 ................................................ ................................................... .. 94.2.1启动................................................. ................................................... . (9)4.2.2加载................................................. ................................................... . (9)4.2.3 定位 ................................................ ................................................... . (9)4.2.4测量................................................. ................................................... . (9)4.2.5读取测量值 ................................................ . (10)4.2.6关机................................................. ................................................... .. (10)5特别提示 ................................................ ................................................... (10)6仪器操作详解 ................................................ ................................................... .. (11)6.1开机 ................................................ ................................................... (11)6.2关机 ................................................ ................................................... (11)6.3测量 ................................................ ................................................... (11)6.3.1主显示界面说明 ................................................ . (11)6.3.2测量操作................................................. (12)6.3.3按键操作................................................. . (12)6.4 菜单结构图 ................................................ (13)6.5 测量条件设置 ................................................ .. (13)6.5.1冲击方向设置................................................. (14)6.5.2平均次数设置................................................. (14)6.5.3材料设置................................................. . (14)6.5.4硬度制设置 ................................................ . (15)6.5.5公差限设置 ................................................ . (15)6.5.6硬度/强度设置 ................................................ (15)6.6 打印功能 ................................................ ...................................................166.6.1 打印当前数值 ................................................ (16)6.6.2 打印存储数值 ................................................ (16)6.6.3 打印全部存储值 ................................................ .. (17)6.6.4 走纸（手动进纸） .............................................. . (17)6.7. 存储管理................................................. ..................................................176.7.1从第一组浏览/从最末组浏览 ................................................ (17)6.7.2从所选组浏览................................................. (17)6.7.3传输数据................................................. . (17)6.7.4删除所选组 ................................................ . (18)6.7.5全部删除................................................. . (18)6.7.6确认删除................................................. . (18)6.8数据浏览 ................................................ ....................................................186.9 系统设置 ................................................ ...................................................196.9.1液晶亮度设置................................................. (20)6.9.2时间日期设置................................................. (20)6.10 软件信息................................................. . (20)6.11 软件校准 ................................................ ..................................................216.12 背光................................................. ................................................... .. (21)6.13 自动关机................................................. . (21)6.14 打印纸卷安装................................................. (22)6.15 电池充电................................................. . (22)6.16 电池更换................................................. . (22)6.17数据传输电缆连接................................................. (23)7 故障分析与排除................................................. ..................................................238保养和维修 ................................................ ................................................... . (23)8.1冲击装置维护 ................................................ (23)8.2仪器维修程序 ................................................ (23)9仪器检定 ...................................... ................................................... (23)10 贮存条件、运输及注意事项 ................................................ . (23)附录................................................. ................................................... .. (24)附表1 .................................................................................................... . (24)附表2 ................................................. ................................................... . (25)附表3 ................................................. ................................................... . (26)附表4 ................................................. ................................................... . (27)用户须知 ................................................ ................................................... .. (28)1 概述1.1 产品特点? 依据里氏测量原理，可以对多种金属材料进行检测。
泽尔特光电产品说明书
Prism TM seriesdiffuse refl ective sensors, OEM versionModels covered in this manual:8-Inch diffuse reflective modelsDC power with Cable DC power with connectorViewing style:Light operate Dark operate Light operate Dark operateNPN output Forward13156ALN1713156ADN1713156ALN0713156ADN07 Right angle13156RLN1713156RDN1713156RLN0713156RDN07PNP output Forward13156ALP1713156ADP1713156ALP0713156ADP07 Right angle13156RLP1713156RDP1713156RLP0713156RDP07NPN/PNP output Forward13156AL1713156AD1713156AL0713156AD07 Right angle13156RL1713156RD1713156RL0713156RD07 24-Inch diffuse reflective modelsDC power with cable DC power with connectorViewing style:Light operate Dark operate Light operate Dark operateNPN output Forward13157ALN1713157ADN1713157ALN0713157ADN07 Right angle13157RLN1713157RDN1713157RLN0713157RDN07PNP output Forward13157ALP1713157ADP1713157ALP0713157ADP07 Right angle13157RLP1713157RDP1713157RLP0713157RDP07NPN/PNP output Forward13157AL1713157AD1713157AL0713157AD07 Right angle13157RL1713157RD1713157RL0713157RD07a Contact factory for availability on these models.aa a a aa a a aa a a aa a a aa a a aa a aCAUTIONTHESE PRODUCTS ARE NOT DESIGNED, TESTED,OR RECOMMENDED FOR USE IN HUMAN SAFETY APPLICATIONS.MAXIMUM INPUT VOLTAGE FOR DC OPERATION IS30 VDC. APPLYING VOLTAGE ABOVE THIS LIMIT WILL RESULT IN DAMAGE TO THE SENSOR.USE #4 MOUNTING HARDWARE ONLY! LARGER HARDWARE WILL DAMAGE THE SENSOR AND MAY CREATE AN ELECTRICAL SHOCK HAZARD. TIGHTEN THE HARDWARE JUST TO THE SENSOR BODY SO THAT NO DEFLECTION OF THE BODY OCCURS.DO NOT USE TOOLS TO APPLY TORQUE DIRECTLY TO SENSOR BODY. ALIGN SENSOR BY HAND BEFORE TIGHTENING MOUNTING HARDWARE.THE GAIN POT IS A 3/4 TURN POT. ANY RESISTANCE ENCOUNTERED WHILE ADJUSTING THIS POT INDICATES YOU HAVE REACHED THE ADJUSTMENT LIMIT STOP. TURNING PAST THIS STOP WILL DAMAGE THE SENSOR.SHORT CIRCUIT PROTECTION WILL AUTOMATICALLY RESET ONCE SHORT IS REMOVED.IntroductionA diffuse reflective sensor operates by shininga beam of light out through the lens. When an object comes within the sensor’s view, it reflects part of this beam of light back to the sensor causing the sensor to detect the object. The maximum range at which a given object can be detected depends on how well its surface reflects light—the less light it reflects back, the shorter the range. The ability of a surface to reflect light depends primarily upon its material of construc-tion, color, and texture.This manual covers both forward viewing and right angle viewing models. Although the units differ in the location of the lenses, the basic fundamentals of installation, set-up, and operation are nearlyidentical.ForwardviewingMountingMounting location and set-upThe Prism sensor features a threaded housing and includes jam nuts and washers. This allows mounting into any 0.75 inch hole, or optional bracket. Use caution to avoid cross-threading the jam nuts on the sensor body. Tighten nuts to less than 4 N•m (36 in.-lbs. or 3 ft.-lbs.) torque to avoid stripping threads.A second mounting method is to use #4 hardware in the 0.125 inch diameter mounting holes in the flat sides of the sensor. This is ideal for mounting the Prism against a wall, piece of equipment, rail, mounting bracket, etc.Select a mounting location with a clear view of the object to be detected. Avoid direct reflection from a highly reflective background (or darken the background). Mount the sensor so that it points at the most suitable part of the target object.Be sure your power supply is off, then connect the sensor to thecontrol circuit and power lines. Turn the power supply on and place a sample object in the beam. Slowly turn the gain adjustment clockwise (see Warning above concerning pot adjustment) until the LED lights (for light-operate model). Note the position and remove the sample object. Now continue turning the gain setting clockwise to find the position where the LED lights from the background reflec-tion. Reset the gain midway between the two positions. Tighten all mounting screws.ote: N If background reflections are low, it will be possible to achieve a maximum gain setting without the LED lighting; in that case, set the gainmidway between the first setting and maximum (this will prevent a hysteresislatch-up after sensing an object).2Installation Instructions 110210-305Effective January 2017EATON Prism TM seriesdiffuse refl ective sensors, OEM versionetected.SpecificationsDC modelsInput voltage 10 to 30 V DC, reverse polarity protected Power dissipation 1 W maximumOutput type NPN only, PNP only, or NPN and PNP by modelOutput operationDark operate models: ON when beam is blocked; OFF when beam is not blocked Light operate models: ON when beam is not blocked; OFF when beam is blocked Current switching capacity 100 mA maximum Off-state leakage 10 mA maximumOn-state voltage dropNPN: 2.0 V at 100 mA; PNP: 2.5 V at 100 mA Short circuit protection Protected against dead shorts only.Operation: Output is continuously retried at 3 mS intervals and will automatically reset when short is removed (no visual indication of a short circuit condition).CAUTION: will not protect against overloads between 100 mA and 1 A.Response time 1.2 mSLight/dark operation Specified by model numberTemperature range Operating: -25° to 55° C (-13° to 131° F), Storage: -25° to 70° C (-13° to 158° F)Sunlight immunity 1,000 foot-candlesMaterial of construction Lens: Polycarbonate; Cable jacket: PVC; Body: Structural polyurethane foam (do not expose to concentrated acids, alcohols, or ketones)Cable models 6-foot long; 3-wire NPN or PNP models; 4-wire NPN/PNP models Connector models Micro Connector, 4-pin maleVibration and shock Vibration: 30g over 10 Hz to 2 kHz; Shock: 50 g for 10 mS 1/2 sinewave pulse Indicator led Lights steady when output is ON; OFF when output is OFF;OFF when output is in short circuit modeAlarm indicator led ON in condition of low gain or noise interferance; OFF in normal condition Enclosure ratings NEMA 1, 2, 3, 4, 4X, 6, 12, and 13 (See note below)ApprovalsContact factory for latest list of agency approvalsote: N Our products conform to NEMA tests as indicated, however, some severe washdown applications can exceed these NEMA test specifications. If you have questions about a specific application, contact our Applications Department.3Installation Instructions 110210-305Effective January 2017EATON Prism TM series diffuse refl ective sensors, OEM version Wiring diagramsNPN modelsPNP modelsNPN/PNP modelsOptical performanceOptical performance(Shown in inches except where noted)All optical specifications are guaranteed to be the minimum perfor-mance under clean conditions of any product delivered from stock.Typical performance may be higher.Dirt in the environment will affect optical performance by reducingthe amount of light the control receives. For best results, sensorsshould be used at distances where excess gain is higher than 1.5(1.5 times the amount of sensing power required to detect an objectunder ideal conditions). Higher excess gain will allow the sensor toovercome higher levels of contamination on the lens. All ranges andexcess gain graphs are based on a 90% reflectance white card.1315613157Source Infrared, 880 nm Infrared, 880 nmMaximum range8 inches (203 mm)24 inches(609mm)Optimum range0.1-5 inches(3-127 mm)0.1-15 inches(3-381mm)Field of view2 inch (51 mm) diameterat 5 inches (127 mm)6 inches (152 mm) at15 inches (381 mm)Eaton1000 Eaton BoulevardCleveland, OH 44122United States© 1999 EatonAll Rights ReservedEaton is a registered trademark.All other trademarks are propertyof their respective owners. Installation Instructions 110210-305Effective January 2017Prism TM seriesdiffuse refl ective sensors, OEM version。
45LR资料
Document Number: 93489For technical questions, contact: ind-modules@Standard Recovery Diodes (Stud Version), 150 A45L(R), 150K(R), 150KS(R) SeriesVishay High Power ProductsFEATURES•Alloy diode•High current carrying capability •High surge current capabilities •Stud cathode and stud anode version•RoHS compliant•Designed and qualified for industrial levelTYPICAL APPLICATIONS•Battery chargers •Welders•Machine tool controls •High power drives•Medium traction applications •Freewheeling diodesELECTRICAL SPECIFICATIONS PRODUCT SUMMARYI F(AV)150 ADO-205AA (DO-8)MAJOR RATINGS AND CHARACTERISTICSPARAMETER TEST CONDITIONSVALUES UNITS I F(AV)150A T C150°C I F(RMS)235A I FSM 50 Hz 3570A 60 Hz 3740I 2t 50 Hz 64kA 2s 60 Hz 58V RRM Range100 to 600V T J- 40 to 200°CVOLTAGE RATINGSTYPE NUMBERVOLTAGE CODEV RRM , MAXIMUM REPETITIVE PEAK REVERSE VOLTAGEVV RSM , MAXIMUM NON-REPETITIVEPEAK REVERSE VOLTAGEVI RRM MAXIMUM AT T J = 175 °CmA45L(R)150K(R)150KS(R)101002003520200300303004004040050060600720元器件交易网 For technical questions, contact: ind-modules@Document Number: 9348945L(R), 150K(R), 150KS(R) SeriesVishay High Power Products Standard Recovery Diodes(Stud Version), 150 AFORWARD CONDUCTIONPARAMETERSYMBOL TEST CONDITIONSVALUES UNITS Maximum average forward current at case temperatureI F(AV)180° conduction, half sine wave 150A 150°CMaximum RMS forward currentI F(RMS)DC at 142 °C case temperature 235A Maximum peak, one cycle forward, non-repetitive surge currentI FSMt = 10 msNo voltage reapplied Sinusoidal half wave,initial T J = T J maximum3570t = 8.3 ms 3740t = 10 ms 100 % V RRM reapplied 3000t = 8.3 ms 3140Maximum I 2t for fusingI 2tt = 10 msNo voltage reapplied 64kA 2s t = 8.3 ms 58t = 10 ms 100 % V RRM reapplied45t = 8.3 ms41Maximum I 2√t for fusingI 2√t t = 0.1 to 10 ms, no voltage reapplied640 kA 2√s Low level value of threshold voltage V F(TO)1(16.7 % x π x I F(AV) < I < π x I F(AV)), T J = T J maximum 0.67V High level value of threshold voltage V F(TO)2(I > π x I F(AV)), T J = T J maximum0.83Low level value of forward slope resistancer f1(16.7 % x π x I F(AV) < I < π x I F(AV)), T J = T J maximum1.42m ΩHigh level value of forward slope resistancer f2(I > π x I F(AV)), T J = T J maximum0.91Maximum forward voltage dropV FMI pk = 471 A, T J = 25 °C, t p = 10 ms sinusoidal wave1.33V THERMAL AND MECHANICAL SPECIFICATIONSPARAMETER SYMBOL TEST CONDITIONS VAL U ESU NITS Maximum junction operating and storage temperature range T J , T Stg - 40 to 200°CMaximum thermal resistance,junction to caseR thJC DC operation0.25K/WMaximum thermal resistance,case to heatsinkR thCSMounting surface, smooth, flat and greased 0.10Mounting torque 45LminimumNot lubricated threads14.1 (125)N · m (lbf · in)maximum 17.0 (150)minimum Lubricated threads12.2 (108)maximum 15.0 (132)Mounting torque 150K 150KSminimumNot lubricated threads11.3 (100)N · m(lbf · in)maximum 14.1 (125)minimum Lubricated threads9.5 (85)maximum12.5 (110)Approximate weight100g 3.5oz.Case style45LSee dimensions - link at the end of datasheetDO-205AC (DO-30)150K-A DO-205AA (DO-8)150KSB-42元器件交易网Document Number: 93489For technical questions, contact: ind-modules@45L(R), 150K(R), 150KS(R) SeriesStandard Recovery Diodes (Stud Version), 150 AVishay High Power ProductsNote•The table above shows the increment of thermal resistance R thJC when devices operate at different conduction angles than DCFig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings CharacteristicsFig. 3 - Forward Power Loss CharacteristicsΔR thJC CONDUCTIONCONDUCTION ANGLESINUSOIDAL CONDUCTIONRECTANGULAR CONDUCTIONTEST CONDITIONSUNITS180°0.0310.023T J = T J maximumK/W120°0.0380.04090°0.0480.05360°0.0710.07530°0.1200.121元器件交易网For technical questions, contact: ind-modules@Document Number: 9348945L(R), 150K(R), 150KS(R) SeriesVishay High Power Products Standard Recovery Diodes(Stud Version), 150 AFig. 4 - Forward Power Loss CharacteristicsFig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge CurrentFig. 7 - Forward Voltage Drop Characteristics元器件交易网元器件交易网Standard Recovery DiodesVishay High Power Products(Stud Version), 150 AFig. 8 - Thermal Impedance Z thJC CharacteristicsORDERING INFORMATION TABLESLINKS TO RELATED DOCUMENTSDimensions /doc?95314Document Number: 93489For technical questions, contact: ind-modules@ Disclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网Document Number: 。
瑞特拉电子产品购买指南说明书
241For additional technical information visit Metric measurements for this product are exact, imperial measurements are rounded to the nearest whole numberUseful Cooling Capacity: 2400 - 5794 BTU (703 - 1697 W)Part No. with basic controller 3303.1042)3303.1142)3304.1043304.1143304.1443305.1043305.1143305.144Part No. with comfort controller 3303.5042)3303.5142)3304.5043304.5143304.5443305.5043305.5143305.544Voltage V , Hz230, 50/60115, 60230, 50/60115, 60400, 50/ 460, 60, 3~230, 50/60115, 60400, 50/ 460, 60, 3~Dimensions inches (mm)H x W x D24 x 11 x 12 (620 x 285 x 298)40 x 16 x 14 (1020 x 405 x 358)Useful cooling capacity Q KBTU (W)T i 131 T a 1312400 (703)3916 (1147)5794 (1697)Useful cooling capacity Q K to DIN 3168 BTU (W)T i 95 T a 951708/2083(500/610)1708 (500)3415/3620 (1000/1060)5123/5157 (1500/1510)T i 95 T a 122956/1195(280/350)956 (280)2698/2869 (790/840)4201/4269 (1230/1250)Rated current maximum 2.6/2.6 A 5.7 A 5.4/5.0 A 10.6/11.1 A 2.8/2.9 A 6.0/6.5 A 12.1/13.6 A 2.6/2.9 A Starting current 5.1/6.4 A 11.5 A 12.0/14.0 A 26.0/28.0 A 11.5/12.7 A 22.0/24.0 A 42.0/46.0 A 12.2/11.3 A Pre-fuse T 10.0 A 10.0 A 10.0 A 16.0 A 10.0 A 1)16.0 A 20.0 A 10.0 A 1)Power consumption Pel toDIN 3168T i 95 T a 95360/380 W 470 W 700/650 W 725/680 W 580/550 W 850/1000 W 880/1050 W 800/980 W T i 95 T a 122420/390 W500 W 750/710 W 780/750 W 660/680 W 1000/1160 W 1040/1200 W 960/1150 W Cooling coefficient j =Q K /PelT i 95 T a 95 1.4 1.7 1.8 1.7 1.9Refrigerant R134a, 6.0 oz (170 g)R134a, 17.6 oz (500 g)R134a, 21.1 oz (600 g)Maximum allowable operating pressure 406 psi (28 bar)363 psi (25 bar)Temperature and setting range Comfort Controller - 68 to 131° F (+20 to +55° C) / Basic Controller - 86 to 131° F (+30 to +55° C)Environmental ratings UL Type 4X (IP 66)Duty cycle 100%Type of connection Plug-in terminal strip Weight lb (kg)55.1 (25)108.2 (49)119.0 (54)110.2 (50)112.4 (51)123.5 (56)114.6 (52)Material Type 304 stainless steelAir displacement offans External circuit 203 cfm (345 m 3/h)530 cfm (900 m 3/h)530 cfm (900 m 3/h)Internal circuit 182 cfm (310 m 3/h)353 cfm (600 m 3/h)471 cfm (800 m 3/h)Temperature control Basic or comfort controller (factory setting 95° F [+35° C])Accessories PU Page Door-operated switch 14127.010–Master/slave cable for comfortcontroller13124.100–3124.100267RiDiag II including cables for comfortcontroller13159.100267Interface card for comfort controller 13124.200268Condensate hose 13301.6103301.6122731) Motor circuit breaker. 2)Internal condensate evaporator not included. Special voltages and technical modifications available on request.Wallmounted UL T ype 4X Air ConditionerCon guration:Fully wired ready for connection, including drilling template and assembly parts. With nano-coated condenser and integrated condensate evaporator.Protection Ratings:UL and cUL recognized, CSA UL Type 4XUL file: SA8250 Material:Type 304 stainless steel Note:Air conditioner with comfortcontroller may be integrated into a monitoring system with an optional interface card 3124.20 (RS 232, RS 485, RS 422 and PLC interface). See page 268. Made in the USA.000C o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a f h .c o242For additional technical information visit Metric measurements for this product are exact, imperial measurements are rounded to the nearest whole numberUseful Cooling Capacity: 8706 - 10525 BTU (2550 - 3083 W)Part No. with basic controller 3328.1043328.1143328.1443329.1043329.1143329.144Part No. with comfort controller 3328.5043328.5143328.5443329.5043329.5143329.544Rated operating voltage V , Hz 230, 50/60115, 50/60400, 50/460, 60, 3~230, 50/60115, 50/60400, 50/460, 60, 3~Dimensions inches (mm)H x W x D 65 x 16 x 15 (1650 x 405 x 388)Useful cooling capacity Q K BTU (W)T i 131 T a 1318706 (2550)10525 (3083)Useful cooling capacity Q K to DIN 3168 BTU (W)T i 95 T a 956860/8025 (2000/2350)8538/9392 (2500/2750)T i 95 T a 1224952/5772 (1450/1690)5464/5977 (1600/1750)Rated current max. 7.5 A/9.1 A 14.7 A/17.3 A 2.8 A/3.3 A 8.6 A/10.6 A 17.0 A/22.0 A 3.7 A/3.8 A Start-up current 22.0 A/26.0 A36.0 A/39.0 A6.8 A/7.8 A 21.0 A/21.0 A44.0 A/42.0 A6.8 A/7.6 A Pre-fuse T16.0 A25.0 A 10.0A/10.0 A 1)16.0 A 25.0 A 10.0 A/10.0 A 1)Power consumption Pel to DIN 3168 T i 95 T a 951025/1200 W 1085/1250 W 1050/1275 W 1450/1675 W 1500/1725 W 1425/1625 W T i 95 T a 1221250/1350 W1300/1410 W1275/1525 W1625/2000 W1675/2065 W1675/1975 WCooling coefficient j = Q K /Pel T i 95 T a 951.72.31.92.0RefrigerantR134a, 31.7 oz (900 g)Maximum allowable operating pressure 406 psi (28 bar)Temperature and setting range Comfort Controller - 68 to 131° F (+20 to +55° C) / Basic Controller - 86 to 131° F (+30 to +55° C)Protection rating UL Type 4X (IP 66)Duty cycle 100%Type of connection Plug-in terminal stripWeight lb (kg)176.4 (80)191.8 (87)176.4 (80)183.0 (83)198.4 (90)183.0 (83)MaterialType 304 stainless steelAir displacement of fans External circuit 377 cfm (640 m 3/h)418 cfm (710 m 3/h)Internal circuit324 cfm (550 m 3/h)377 cfm (640 m 3/h)Temperature control Basic or comfort controller (factory setting 95° F [+35° C])Accessories PU Page Door-operated switch14127.010–Master/slave cable for comfort controller13124.100267RiDiag II including cables for comfort controller 13159.100267Interface card for comfort controller 13124.200268Condensate hose13301.6122731)Motor circuit breaker. Special voltages available on request. We reserve the right to make technical modifications.Wallmounted UL T ype 4X Air ConditionerCon guration:Fully wired ready for connection, including drilling template and assembly parts. With nano-coated condenser and integrated condensate evaporator.Protection Ratings: UL and cUL recognized UL Type 4X UL file: SA8250Material:Type 304 stainless steelNote:Air conditioner with comfortcontroller may be integrated into a monitoring system with an optional interface card 3124.200(RS 232, RS 485, RS 422 and PLC interface). See page 268. Made in the USA.C o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a f h .c o。
BD45245中文资料
ApplicationsVOLTAGE DETECTOR IC with counter timerBD45XXXG BD46XXXGBD45XXXG and BD46XXXG are series of high-accuracy detection voltage and low current consumption VOLTAGE DETECTOR ICs adopting CMOS process. New lineup of 156 types with delay time circuit have developed. Delay time is fixed in the IC due to the built-in counter timer to require no external capacitor. Total 156 types of VOLTAGE DETECTOR ICs including BD45XXXG series (Nch open drain output) and BD46XXXG series (CMOS output), each of which has 26 kinds in every 0.1V step (2.3~4.8V) and three kinds of delay time (50msec, 100msec, 200msec) have developed.Every kind of appliances with microcontroller and logic circuitFeatures1) Built-in delay time circuit(Fixed delay time by the built-in ±10% of high-accuracy counter timer)2) No external capacitor for setting delay time required 3) 3 kinds of delay time: 50msec (Typ.)(BD45XX5G,BD46XX5G) 100msec (Typ.)(BD45XX1G,BD46XX1G) 200msec (Typ.)(BD45XX2G,BD46XX2G)4) Detection voltage: 2.3V ~ 4.8V 0.1V step 5) High-accuracy detection voltage: ±1.0% 6) Ultra low current consumption: 0.85µA typ.7) Output circuit: Nch open drain (BD45XXXG) 8) Package: SSOP5(SMP5C2)9) Operating temperature range: -40°C ~ +105°C BD45XXXGBD46XXXGPin No.SSOP5ERSubGNDV OUTV DD12345 Application CircuitCMOS (BD46XXXG)Absolute Maximum Ratings (Ta=25˚C)Electrical characteristics (1 ˚C ˚C∗1 This value is guranteed at Ta=25˚C.Note) R L is not necessary for CMOS output type.Note) Please refer to the detection voltage of Line-up table.Characteristic diagram and Measurement circuitV DET ±0.5VΩV DET ±0.5VΩTa (°C)t P L H (m s e c )-Ta (°C)t P L H [µs e c ]-Output delay time "L → H"Output delay time "H → L"V DD (V)IDD(µA)V DD (V)VOUT(V)(mA)V DS (V)IOLTiming waveformV DDTa (˚C)VDET(V)VΩVΩVV DS (V)IDS(mA)V DDV DDV OUTERV DET0VVVVV DET+∆VI/O characteristic Detection voltagePart number and Marking of samplesBD45485BD45475BD45465BD45455BD45445BD45435BD45425BD45415BD45405BD45395BD45385BD45375BD45365BD45355BD45345BD45335BD45325BD45315BD45305BD45295BD45285BD45275BD45265BD45255BD45245T0T1T2T3T4T5T6T7T8T9TA TB TC TD TE TF TG TH TJ TK TL TM TN TP TQ TRTS TT TU TV TW TX TY TZ U0U1U2U3U4U5U6U7U8U9UA UB UC UD UE UF UG UHUJ UK UL UM UN UP UQ UR US UT UU UV UW UX UY UZ V0V1V2V3V4V5V6V7V8V94.8V 4.7V 4.6V 4.5V 4.4V 4.3V 4.2V 4.1V 4.0V 3.9V 3.8V 3.7V 3.6V 3.5V 3.4V 3.3V 3.2V 3.1V 3.0V 2.9V 2.8V 2.7V 2.6V 2.5V 2.4V 2.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 VB VC VD VE VF VG VH VJ VK VL VM VN VP VQ VR VS VT VU VV VW VX VY VZ W0W1W2W3W4W5W6W7W8W9WA WB WC WD WE WF WG WH WJ WK WL WM WN WP WQ WR WS WTWU WV WW WX WY WZ X0X1X2X3X4X5X6X7X8X9XA XB XC XD XE XF XG XH XJ XKBD46235BD46481BD46471BD46461BD46451BD46441BD46431BD46421BD46411BD46401BD46391BD46381BD46371BD46361BD46351BD46341BD46331BD46321BD46311BD46301BD46291BD46281BD46271BD46261BD46251BD46241BD46231BD46482BD46472BD46462BD46452BD46442BD46432BD46422BD46412BD46402BD46392BD46382BD46372BD46362BD46352BD46342BD46332BD46322BD46312BD46302BD46292BD46282BD46272BD46262BD46252BD46242BD46232(SMP5C2)Marking Voltage Part No.Marking Part No.Marking Part No.Marking Part No.Marking Part No.Marking Part No.Line-up。
原子舌部进口太阳能对比选择器说明书
The Fluke 576 Photographic Non-contact ThermometerInfrared temperature measurement withdigital photos Technical DataIntroducing the world’sfirst precision infrared (IR) thermometer with integral digital photography. For the most complete temperature documentation solution, predictive maintenance professionals use the Fluke 576 precision IR thermometer.insetapplication phototo comeMeasurePhotographDocumentAny infrared thermometer can measure temperature, but only the Fluke 576 thermometer measures temperature while digitally photographing the measured area and its surroundings.The proof is in the picture! Temperature measurement locations are instantly captured in a digital photo with a time and date stamp in the image. The laser sighting pinpoints the exact measurement location, without the need for a view finder.Make sure the inspection was done properly. Download images and data to the PC software and double-check all work.Ensure consistency of repeated measurements by using prior photos as a reference—position the laser sighting as shown in the photo to assure the measurement area is the same.Create customized company reports with the software, data and photos. Just insert information from Fluke 576 data files into reports for fast, professional results.insetapplication photo tocomeAdvanced display •Icons for camera active, flash active, and flash charging, and indication of photos remaining•Confirmation of a successful photo taken•30 preset common material emissivities •Adjustable emissivity values (0.01 increments)•100 location logging capability •Customized log location names and alarmsClose Focus OptionThe Close Focus (CF) option lets you accurately measure very small areas at the focus point – where the IR beam narrows. Paired with an advanced coaxial laser sighting system, extremely small objects 6 mm (0.24 in) at 300 mm (11.4 in) can be easily measured. Ideal for electrical maintenance and refrigeration troubleshooting.©2005 Fluke Corporation. All rights reserved. Printed in U.S.A. 4/2005 2437668 D-US-N Rev AFluke. Keeping your world up and running.SpecificationsOrdering Information Options• Close focus• NIST calibration certificate Accessories • Analog cableIncluded with Fluke 576 unit:• User’s guide (on CD)• Hardshell carrying case • PC software• USB computer cable • Thermocouple K probe• Padded pouch with belt clipAnalog cable accessory。
2008年Chrysler自动变速箱配件目录说明书
1202008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG ©2008 PARKER HANNIFIN CORP. ALL RIGHTS RESERVEDABCDE070034530520510179500037211311310046B555046336337Direct DrumStatorFront PlanetShellForward Clutch074066774848368770348273274716274273720698725074730274273375735897680685189995-1995-2991-6994995758303777778Pinion787781Differential793785Diff.Parts717Kickdown BandFront Ring GearDifferential CoverGov.Ext. Hsg.786022000P&R Kits002Overhaul Kits 004Master L/Master W/Steels Kit119Friction Module 139 Steel Module 175Ring Kits 200Washer Kits 008390External Seal Kit1212008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG©2008 PARKER HANNIFIN CORP . ALL RIGHTS RESERVEDBCDE965975985879565964974877564556Output Shaft740010300765907906909195896905927926929192899925363911910194195361908899192191886911B 913914885347425916-4916-2916-1916255254278710687273276274712277796916-6919922917-4A917-6917-4917-2917-1917-5917920923780Rear CoverV.B Parts741326779377410Input ShaftReverse DrumInner Sprag RaceCase DrivenDrive727072912024*Prefix Letter ‘T’ denotes Toledo-Trans Kit (TTK) Brand Transmission Kits*Prefix Letter ‘B’ denotes Bryco Brand Transmission Kits000.............T32000B........Paper & Rubber Kit, A404,413/470/670 1978-Up......................................................................1..........000.............T32000C........Paper & Rubber Kit, A404,413/470/670 (w/o Pan Gasket) 1981-Up........................................1..........002.............T32002A........Overhaul Kit, A413/470/670 1981-Up (4 Metal, 11 PTFE Rings)...............................................1..........002.............TF32002A......Overhaul Kit, A413/470/670 1981-Up (4 Metal, 11 PTFE Rings, Fiber Pan Gasket).................1..........002.............T32002C........Overhaul Kit, A413/470/670 1981-Up (4 Metal, 11 PTFE Rings, w/o Pan Gasket)...................1..........E300...........49009T..........Gasket, A404/413/470/670 Bottom Pan 1978-Up (Cork)...........................................................1. (5224052)E300...........49118.............Gasket, A404/413/470/670 Bottom Pan 1978-Up (Fiber Pan Gasket)......................................1..........C303...........49109AU.......Gasket, A404/413/470/670 Differential Cover 1978-Up (Cork)................................................1. (5212276)C303...........49197106......Gasket, A404/413/470/670 Differential Cover 1978-Up (Fiber)................................................1..........C304...........49009AT........Gasket, A404/413/470/670 Transfer Gear Cover (Cork) 1978-Up...........................................1. (5222142)C304...........49018A..........Gasket, A404/413/470/670 Transfer Gear Cover (Fiber Gasket) 1978-Up.............................1..........A310..........49197102......Gasket, A404,413/470/670 Pump 1978-Up................................................................................1. (5212306)A311...........49016............O-Ring, A404,413/470/670 Pump 1978-Up................................................................................1. (5205660)...................49996097......Washer, A404, 413,417 Pump Bolts 1978-Up........................................................................... 7.........E326...........49197249......Gasket, A404/413/470/670 Filter (Fiber Type) 1978-Up............................................................1. (3878313)...................49197125......Gasket, A404,413, 417 Solenoid 1978-Up.................................................................................1. (4412305)D347...........1994113.........O-Ring, A404,413/470/670 Solenoid 1978-Up...........................................................................2. (6264902)A334..........1990094........Lip Seal, A404/413/470/670 Forward Clutch Piston (Inner)......................................................1. (5212373)A335..........1990095........Lip Seal, A404/413/470/670 Forward Clutch Piston (Outer).....................................................1. (5205701)A336..........1990092........Lip Seal, A404/413/470/670 Direct Clutch Piston (Inner)..........................................................1. (5205670)A337..........1990093........Lip Seal, A404 Direct Clutch Piston (Outer) 1978-80................................................................1. (5205671)A337..........1990075........Lip Seal, A413/470/670 Direct Clutch Piston (Outer) 1981-Up..................................................1. (4058487)D348...........1993148........O-Ring, A404/413/470/670 Extension Housing 1978-Up..........................................................1. (6500111)...................1990081........Seal, A404/413/470/670 Throttle Lever Shaft 1978-Up............................................................1. (2466548)E363...........1990096........Lip Seal, A404/413/470/670 Reverse Servo (Viton) 1978-Up..................................................1. (4269736)D368...........1995121........O-Ring, A404/413/470/670 Speed-O Adapter 1978-Up............................................................1. (5212152)D368...........1992129........O-Ring, A404 Speedometer Hsg. 1978-Up................................................................................1. (6031370)...................1994113.........O-Ring, A404/413/470/670 Filler Tube 1978-Up........................................................................1. (6264902)E375...........1991146.........O-Ring, A404/413/470/670 Pinion Bearing Retainer 1978-Up..................................................1-2.. (6500169)...................1991031........O-Ring, A404 Accum. Plate 1981-Up.........................................................................................1. (6031545)...................1990097........Lip Seal, A404, 413, 417 Speedometer Pinion 1978-Up............................................................1. (4057047)...................1990006........Lip Seal, A404, 413, 417 Speedometer Pinion 1978-Up............................................................1. (2538588)...................199501..........O-Ring, A404,413, 417 Speedometer Cable 1978-Up...............................................................1. (1536268)...................1991033........O-Ring, A404 Accum. Cover 1980 Only....................................................................................1. (4130829)E361...........1992500........O-Ring, A404 Kick Down Servo Rod To Piston 1978-80...........................................................1. (6031559)...................1995131........O-Ring, A404 Servo Guide 1978 Only.......................................................................................1.............................49175262......Seal, A413, A417 Cooler-By Tube 1998-Up..............................................................................1..........4800019AA 390.............8030ES..........External Seal Kit, A404, 413, 417 1978-Up................................................................................1..........A070..........33081............Seal, A404/413/470/670 Front (Without Flange).......................................................................1. (4269057)A070..........70019FM........Seal, A404/413/470/670 Front (With Flange)............................................................................1..........D072...........70008............Seal, A404/413/470/670 Manual Shaft (1/4" Thick) 1966-Up....................................................1. (3878447)2008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG©2008 PARKER HANNIFIN CORP. ALL RIGHTS RESERVED 1221232008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG©2008 PARKER HANNIFIN CORP . ALL RIGHTS RESERVEDD074...........70020............Seal, A404/413/470/670 (Both Axles).......................................................................................2..........5205591...................70035............Seal, A404/413 Pinion Shaft.......................................................................................................1..........5222015175.............6005..............Ring Kit, A404,413/470/670 (4 Metal, 11 PTFE) 1978-Up ..........................................................1..........175.............6005OS .........Ring Kit, A404,413/470/670 (4 OSMetal, 11 PTFE) 1978-Up .....................................................1..........175.............6299..............Ring Kit, A404,413/470/670 (6 Metal, 9 PTFE) 1978-Up ............................................................1..........175.............49061............Ring Kit, A404,413/470/670 (10 OS Metal, 5 PTFE) 1978-Up....................................................1..........A177..........TAW-1164......Ring, A404/413 Input Shaft (1.062"OD) (Metal) 1978-85.........................................................1-2........1401221A177..........30350............Ring, A404/413 Input Shaft (1.062"OD) (PTFE) 1978-86.........................................................1-2........4269592A177..........TAW-1585.....Ring, A413/470/670 Input Shaft (.940"OD) (Metal) 1986-Up....................................................2-3........4377047A177..........30358............Ring, A413/470/670 Input Shaft (.940"OD) (PTFE) 1986-Up ....................................................2-3........4377047A178..........TAW-1189......Ring, A404/413/470/670 Forward Clutch Drum (1.750"OD) (Metal).........................................1..........5205697A106..........49020R ..........Friction, A404/413/470/670 Direct Clutch (.083") (Waffle) 1978-Up .......................................2-4........5205675B108...........49022R ..........Friction, A404 Forward Clutch (.071)(47 Teeth) 1978-80.........................................................2..........5222185B108...........49024............Friction, A413/470/670 Forward Clutch (.071") (49 Teeth) 1981-Up.......................................2-4........5224084119.............49080R ..........Friction Module, A404 1978-80..................................................................................................1..........119.............49080T ..........Friction Module, A404 1978-80 (AOM)......................................................................................1..........119.............49180R ..........Friction Module, A413/470/670 1981-UP....................................................................................1..........119.............49180T ..........Friction Module, A413/470/670 1981-UP (AOM)........................................................................1..........A126..........49021............Steel, A404 Forward & Direct Clutch (.065") (4 1/8"ID) 1978-80..............................................4..........5205677A126..........49023............Steel, A413/470/670 Direct Clutch (.101") (4 1/8"ID) 1981-Up.................................................3-4........4207208B128...........49025............Steel, A413/470/670 Forward Clutch (.068") (4 1/4"ID) 1981-Up ............................................2-3........5224073139.............49081............Steel Module, A404 1978-80......................................................................................................1..........139.............49181............Steel Module, A413/470/670 1981-Up........................................................................................1..........E010...........33240............Filter, A404/413 (Felt) 1978-82...................................................................................................1..........5212145E010...........33245............Filter, A404/413/470/670 (1/2 Plastic & 1/2 Metal) 1978-Up ......................................................1..........4269649011.............33255............Filter Kit, A404/413 (Felt) 1978-82.............................................................................................1..........011.............33255A..........Filter Kit, A404, 413 1978-82 (Fiber Pan Gasket) Shallow Pan ................................................1..........011.............33251............Filter Kit, A413/470/670 (Plastic) 1983-Up.................................................................................1. (011).............33251A..........Filter Kit, A413/470/670 (Plastic), Fiber Pan Gasket w/Deep Pan 1982-Up..............................1.............................49565091......Screen, A404/413/470/670 (Bolts Under Governor) Flat 3 Bolt ...............................................1..........5205839...................33245A..........Screen, A404/413/470/670 (Bolts Under Governor) Flat 3 Bolt ..............................................1.............................49165031......Filter, A413/470/670 Regulator Screen (Inside Valve Body).....................................................1..........3878313A022..........49092............Band, A404/413/470/670 Kickdown (Semi-Flex)......................................................................1..........5212312B024...........49093............Band, A404/413/470/670 Reverse ............................................................................................1..........5205765B024...........49091............Band, A404/413/470/670 Reverse Relined................................................................................1. (4531138)030.............49030............Bushing Kit, A404/413/470/670..................................................................................................1..........A034..........33383............Bushing, A404/413/470/670 Pump Body...................................................................................1..........A037..........49034............Bushing, A404/413/470 Stator 1978-85.....................................................................................1. (4058635)A037..........49635............Bushing, A413/470/670 Stator (1986-Up)..................................................................................1..........A046..........33393............Bushing, A404/413/470/670 Direct Drum (Rear).......................................................................1. (5222406)A046B........33392............Bushing, A404/413/470/670 Direct Drum (Front) (Large).........................................................1. (5222405)B050...........33395............Bushing, A404/413/470/670 Front Ring Gear Hub....................................................................1. (5205728)B052...........33394............Bushing, A404/413/470/670 Sun Gear......................................................................................2. (5205735)B061...........33391............Bushing, A404/413/470/670 Rear Band Drum...........................................................................1. (5222137)D066...........33390............Bushing, A404/413/470/670 Extension Housing.......................................................................1. (5212223)B612...........49089............Sun Gear, A413/470/670 (29 Teeth / 36 Teeth) 1981-Up..........................................................1. (5224192)B622...........32144............Shell, A413/470/670 1981-Up....................................................................................................1..........B654...........49185............Sprag Kit, A404/413/470/670 Spring & Rollers..........................................................................1. (4186886)C664...........K32961..........Inner Race, A413/470/670 Low Overrun Rear Sprag (Bolt-In) 1981-Up.................................1..........A530..........49182............Pump Gear Set, A413/470/670 (.589") W/Milled Flats 1986-Up................................................1..........2008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG©2008 PARKER HANNIFIN CORP. ALL RIGHTS RESERVED 1242008 AUTOMATIC TRANSMISSION KIT & COMPONENTS CATALOG©2008 PARKER HANNIFIN CORP. ALL RIGHTS RESERVED125。
工写斯特 工位中心 产品说明书
color & trIm oPtIonsHeight Adjustable WorkcentersT ask LightingMonitor ArmsAdjustable Keyboard Platforms159159Color & Trim Options160Silhouette Edge ProfilesErgoS1BlockS2CraftS3Height Adjustable Workcenters: Laminate ColorsClassic Collection–Workrite Sierra HX, HXL and ProliftixFolkstone GraySG241Opti GraySG213BlackSE101Ice FishinWF181White SpectrumAW785Gateway to the FutureAV100Cavalcade SouthAT650Tropical GetawayAV110Summer Heat WaveAO360IL Palio PapelAV981Coriander FiberAT981Leave LikatreWP120Looks LikatreWP110Appears LikatreWP115Seems LikatreWP125Hardrock MapleWM791PearwoodWX031Shaker CherryWC521Oiled CherryWC421Jewel MahoganyWY351Black AshwoodSZ101Silhouette Collection–Workrite Sierra HX & HXLHardrock Maplewith brown coreWM791Appears Likatrewith brown coreWP115Seems Likatrewith brown coreWP125Oiled Cherrywith brown coreWC421Folkstone Graywith black coreSG241White Spectrumwith black coreAW785Looks Likatrewith black coreWP110Blackwith black coreSE101All Silhouette worksurfaces are made of GREENGUARD® certified material.Color & Trim Options161 800.959.9675Note: Due to printing limitations, colors are not guaranteed to be accurately reproduced. For best results, refer to actual finish samples available from your Workrite sales representativeor by calling 1.800.959.9675Lead Times:Classic Collection: 10 working days for quantity 20 or less.Designer Collection: 20 working days for quantity 10 or less.Silhouette Collection: 10 working days for quantity 10 or less.Height Adjustable Workcenters: Metal Finishes & Trim OptionsMetal FinishesSierra HX and HXLProliftixSierra Silver SCharcoal CEdge Treatments for Classic & Designer LaminatesStandardWedgeRippleBlack 07Height Adjustable Workcenters: Laminate Colors (cont.)Designer Collection–Workrite Sierra HX and HXLSpa White S740T Almond ST655Putty Gray SG209Taupe ST606Sage SV720Cubicle Papel AG561Gray Santos AG291Negotiating in Geneva PFA60Beige Crepe AT251Opti Gray Crepe AG341Vanilla Fiber AW871Wheat Fiber AT991Oatmeal Fiber AT101Thyme Fiber AV721Pepper Fiber AG581Manila Linen AT231Gridlock in LA PFA51Travlin Light AT680Gold Pannin AT710Passin Through AV250Blue Sandstone AB191Caramel Crepe AT111Amber Raffia II AO355Brick by Brick AR350Anigre WX041Millwork Cherry WC431Honey Maple WM951Yorkshire Cherry WC411Moroccan Fresco AT121Sipping Seattle Java PFA48Color & Trim Options162Adjustable Keyboard PlatformsGlide 2All OthersPlatform Palm Support PlatformPalm SupportCharcoalCCool GrayGCharcoal11Cool Gray12BLight GrayG25Dove Gray26Monitor ArmsWillowWorkrite Poise, SwingArm & SteadyArmSilverSGraphiteBSilverSTask LightingDazz—SL Fino, Verano & AstraLincolnD1N1N2G1G2G4W1CSterlingS WSilverSNote: Due to printing limitations, colors arenot guaranteed to be accurately reproduced.For best results, refer to actual finish samplesavailable from your Workrite sales representativeor by calling 1.800.959.9675 Height Adjustable Workcenters: Sierra Modesty PanelFabric ColorSierra HX, HXL and ProliftixWhite01Pearl02Bronze03Dove04Linen05Pewter06Charcoal07。
ATLAS 45HC-XL 30-Ton Hydraulic C-Frame Press 说明书
SAFETY INFORMATIONThis symbol alerts you to the possibility of serious injury or death if instructions are not followed.This symbol alerts you to the possibility of damage to or destruction of equipmentif instructions are not followed.Failure to heed these warnings may result in lossof load, damage to the press and/or failure resulting in property damage, personal or fatal injury. Thisoperating manual contains important details concern-ing the safe operation of this tool. The user must read and understand these details before any use of the tool. This manual must be retained for future reference.• Read, study, and understand all instruction manuals packed with this press before operating.• Always wear safety goggles.• Parts being pressed may splinter, shatter, or be ejected from the pressat a dangerous rate of speed. Because of the variety of press applications, it is your responsibility to always use adequate guards and wear eye protection and heavy protective clothing when operating the press.• Visual inspection should be made before each use of the press, checking for signs of cracked welds, bent bed pins, loose or missing bolts, leaks, or any other structural damage.• Do not go near leaks. High pressure oil can puncture skin and cause serious injury, gangrene, or death. If injured, seek emergency medical help. Immediate surgery is required to remove oil.• Keep hands and ngers out of the press and away from parts that may shift and pinch. Do not stand in front of work area when load is applied. • Always use an accurate pressure gauge to measure pressing force.• Do not exceed the rated capacity of this press.• Never tamper with hydraulic system pressure settings.• Do not substitute bolts, pins or any part of the components. Use only genuine factory replacement parts.• Always center load on ram plunger. Offset loads can damage ram and may cause load to eject at a dangerous rate of speed.• Remove all loads from press bed before attempting to adjust bed height. Beware of possibility of falling bed.• Press only on loads supported by press bed and included press plates. Do not support loads on oor or press frame.• When using any accessories such as arbor plates, be certain they are centered on press bed and are in full contact with press bed.• Before applying load, be certain all press bed supporting pins are fully engaged.• Use caution when positioning work to be pressed to ensure that the item that is to be pressed cannot be dislodged or broken during press work. This may result in the item being ejected from the press at a dangerous rate of speed.• Release hydraulic pressure before loosening any ttings.• Maintain proper hydraulic uid levels.•Do not make any alterations to the press.OWNER/USER RESPONSIBILITYThe owner and/or user must have an understanding of the manufacturer'soperating instructions and warnings before using this press. Personnel involved in the use and operation of equipment shall be careful, competent, trained, and quali ed in the safe operation of the equipment and its proper use when servicing motor vehicles and their components. Warning information should be emphasized and understood.If the operator is not uent in English, the manufacturer's instructions and warnings shall be read to and discussed with the operator in the operator's native language by the purchaser/owner, making sure that the operator comprehends its contents.Owner and/or user must study and maintain for future reference themanufacturer’s instructions. Owner and/or user is responsible for keeping all warning labels and instruction manuals legible and intact. Replacement labels and literature are available from the manufacturers.INSPECTIONVisual inspection of the shop press should be made before each use of the press, checking for damaged, loose or missing parts. Each press must be inspected by a manufacturer’s repair facility immediately, if subjected to an abnormal load or shock. Any press which appears to be damaged in any way, is found to be badly worn, or operates abnormally must be removed fromservice until necessary repairs are made by a manufacturers's authorized repair facility. It is recommended that an annual inspection of the press be made by a manufacturer’s authorized repair facility and that any defective parts, decals or warning labels be replaced with manufacturer’s speci ed parts. A list of authorized repair facilities is available from the manufacturer.SAFETY INSTRUCTIONS• CHECK YOUR LOCAL, STATE AND FEDERAL REGULATIONS REGARDING THE SAFE USE OF THIS EQUIPMENT.• Your safety is top priority. Please handle equipment with care.• Fully retract unit and remove all items from the press bed frame. • Support the press bed, and remove the pins.• Raise or lower bed to desired height and reinstall press pins. Be certain pins are fully engaged in the parallel anges of the upright columns.• Position press on a at, level, hard surface, preferably concrete. Make sure all nuts and bolts are tight.• Clear the area of bystanders, especially small children, before using.• Set the press bed to the required height. The press is most effective when the work piece is located 1 inch below the ram’s retracted position. The compression stroke can include the entire 5 inch working range. • The press is designed to exert a force on anything which is positioned beneath its ram. The work piece can pop out from under the ram at a high rate of speed and injure someone.LIMITED WARRANTY:SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY’S SUNEX TOOLS ® BRANDED PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS.Sunex International, Inc. will repair or replace its Sunex T ools ® branded products which fail to give satisfactory service due to defective workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that speci c product. This product carries a ONE-YEAR warranty. During this warranty period, Sunex T ools ® will repair or replace at our option any part or unit which proves to be defective in material or workmanship.Other important warranty information....This warranty does not cover damage to equipment or tools arising fromalteration, abuse, misuse, damage and does not cover any repairs or replace-ment made by anyone other than Sunex Tools ® or its authorized warranty service centers. The foregoing obligation is Sunex Tools ®’ sole liability under this or any implied warranty and under no circumstances shall we be liable for any incidental or consequential damages. Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.Return equipment or parts to Sunex Tools ®, transportation prepaid. Be certain to include your name and address, evidence of the purchase date, and description of the suspected defect.If you have any questions about warranty service, please write to Sunex Tools ®.This warranty gives you speci c legal rights and you may also have other rights which vary from state to state. Repair kits and replacement parts are available for many of Sunex Tools ® products regardless of whether or not the product is still covered by a warranty plan.SHIPPING ADDRESS: MAILING ADDRESS:Sunex ToolsSunex Tools 315 Hawkins Rd.P .O. Box 4215Travelers Rest, South Carolina 29690Greenville, South Carolina 29608THIS OPERATING MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. READ CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING THIS TOOL. SAVE THIS MANUAL FOR FUTURE USE.。
钻井转盘参数仪[实用新型专利]
![钻井转盘参数仪[实用新型专利]](https://img.taocdn.com/s3/m/e1e36dc33169a4517623a3a0.png)
专利名称：钻井转盘参数仪专利类型：实用新型专利发明人：文必用,曲哲,郑江杰申请号：CN98239175.7申请日：19981027
公开号：CN2373564Y
公开日：
20000412
专利内容由知识产权出版社提供
摘要：本实用新型属于石油工业电子仪表涉及一种钻井转盘参数仪。
转盘扭矩传感器采用方瓦式扭矩传感器和信号处理,数据无线发射方式进行,数据线性,精度为±10N·M,转盘转速传感器采用霍尔传感器,体积小、无磨损可长期使用。
该仪采用单片机处理系统可准确检测钻具扭力大小,为判断分析井下地层地质结构的变化情况,井底遇阻,钻头运行状态提供准确数据,防止钻具扭伤,断裂等恶性事故发生。
申请人：文必用
地址：124010 辽宁省盘锦市兴隆台区胜利小区
国籍：CN
代理机构：盘锦市专利事务所
代理人：张亚安
更多信息请下载全文后查看。
CETC-45蓝宝石加工设备目录
CETC-45 LED 设备目录
公司地址：北京市经济技术开发区泰河三街 1 号 生产基地：北京东燕郊国家高新区海油大街 20 号 电 话：+86-10-6159 8218 传 真：+86-10-61598221
� � � � � �
加热区台面尺寸：400mm×400mm； 预热冷压区工作行程：310mm； 冷压区台面尺寸：400mm×400mm； 冷压盘直径：Φ360mm 内置冷却水循环结构（冷却水循环系统用户自备） ； 浮动接头连接结构，保证晶片受压均匀；
一、蓝宝石加工设备
1、JXQ-1201 金刚石线切割机 主要用于用于切割尺寸大、因内应力较大而易开裂、超硬 （LYSO、蓝宝石，石英， YAG 等）的晶体材料。
单线切割指运用单根金刚线对晶体进行切割； 为避免晶体因切割而开裂， 可根据晶体硬 度、应力等情况，对金刚线的进给速度和切割速度可进行调节；为保证切割晶体的尺寸精度 和形位精度，在切割前可根据切割角度要求能对晶体切割在θ向进行调整。 设备包括收放线系统、主辊及导向轮系、送料系统、切割进给系统、工作台 360°旋转 系统，冷却系统，自动控制系统等。
推拉把
浮动接头
冷压盘
水冷槽
温控器
气压表
加压开关
加热开关
外形尺寸：长×宽×高 = 主要功能及技术指标： � � � 加热台温度可调，温度控制范围:
910mm×600mm×814mm
≤200 ℃；
冷压台压力可调，压力控制范围：≤ 200Kgf； 气缸升降速度可调，实现柔和加压；
第 5 页 共 12 页 联系人：李力钊 13833668021
CETC-45 LED 设备目录 第 7 页 共 12 页 联系人：李力钊 13833668021
普瑞45mil芯片规格书
Bridgelux BXCE 45x45 NLX-5 Product Data Sheet DS-C10 (2/4/2011)NLX-5 BLUE POWER DIEBXCE 45 x 45 milPRODUCT DATA SHEET DS-C10The Bridgelux NLX-5 family of blue power die enables high performance and cost effective solutions to serve solid state lighting market. This next generation chip technology delivers improved efficiency and performance to enable increased light output for a variety of lighting, signaling and display applications.Features∙ High lumen output and efficiency ∙ Long operating life∙Increased current spreading traces for highly efficient and uniform illumination∙100% Tested and sorted by wavelength, power and forward voltage∙ Lambertian emission pattern ∙Compatible with Solder paste, solder preform or silver epoxy die attach∙ Delivered on medium tack blue tape (20cm±10mm ×20 cm±10mm)Applications∙ General Illumination ∙ StreetLights ∙ PortableLighting ∙ Architectural Lighting ∙ Directional Lighting ∙Wide Area Lighting ∙ DisplayBacklighting ∙ DigitalCamera Flash ∙ Automotive Lighting ∙ White LEDsLED Chip DiagramPart Numbering and Bin DefinitionsBridgelux LED chips are sorted into the brightness and dominant wavelength bins shown below at I f = 350 mA. Each blue tape contains die from only one brightness bin and one wavelength bin.Each blue tape contains chips with 0.2 V forward voltage bins: 3.0 - 3.2 V, 3.2 - 3.4 V and 3.4 - 3.6 V. The typical forward voltage is 3.4 V and the maximum forward voltage (V f max) = 3.6 V.Dominant Wavelength Power Bin E2(320-340 mW)Power Bin F1(340 – 360 mW)Power Bin F2(360 – 380 mW)445 to 447.5nm BXCE4545445- E2-z BXCE4545445- F1-z BXCE4545445- F2-z 447.5 to 450nm BXCE4545447- E2-z BXCE4545447- F1-z BXCE4545447- F2-z 450 to 452.5nm BXCE4545450- E2-z BXCE4545450- F1-z BXCE4545450- F2-z 452.5 to 455nm BXCE4545452- E2-z BXCE4545452- F1-z BXCE4545452- F2-z455 to 457.5nm BXCE4545455- E2-z BXCE4545455- F1-z BXCE4545455- F2-z 457.5 to 460nm BXCE4545457- E2-z BXCE4545457- F1-z BXCE4545457- F2-z 460 to 462.5nm BXCE4545460- E2-z BXCE4545460- F1-z BXCE4545460- F2-z 462.5 to 465nm BXCE4545462- E2-z BXCE4545462- F1-z BXCE4545462- F2-zProduct NomenclatureB XC E 4 5 4 5 X X X – Y Y – ZWhere:BXCE:Designatesproductfamily4545: Designates die size (45 mil x 45 mil)XXX: Designates dominant wavelength binYY: Designates radiometric power binZ: Designates forward voltage binMechanical DimensionsChip Size 1143 +30/-15 μm × 1143 +30/-15 μm (45 mil x 45 mil)Chip Thickness 150 ± 10 μm (5.9 mil)Au Pad Thickness 2.4 ± 0.2 μmAu Pad Diameter P Pad (2X): 100 μm N Pad (2X): 105 μmAbsolute Maximum RatingsParameter SymbolMaximumRatingCondition DC Forward Current I f 700mA1T j = 140°CForward Voltage V f 3.5V I f = 350 mAJunction Temperature T j 150°CReverse Voltage V r -5 V T a = 25°CReverse Current I r 2.0 µA V r = -5 VOptical Power (minimum) P0 275mW I f = 350 mAAssembly Process Temperature 325°C for < 5 secondsStorage Conditions (chip on tape)60°C to +40°C ambient, RH < 65%Notes:1. Maximum drive current depends on junction temperature, die attach methods/materials, and lifetimerequirements of the application.2. Bridgelux LED chips are Class 1 ESD sensitive.3. The typical spectra half-width of the NLX-5 blue power die is < 25 nm.4. Please consult the Bridgelux technical support team for information on how to optimize the light outputof our chips in your package.5. Brightness values are measured in an integrating sphere using gold plated TO39 headers withoutencapsulation.6. Tapes should be stored in a vertical orientation, not horizontally stacked. Stacking of tapes can placeexcessive pressure on the bond pads of the LED, resulting in reduced wire bonding strength. Environmental ComplianceBridgelux is committed to providing environmentally friendly products to the solid state lightingmarket. Bridgelux NLX-5 blue power die are compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS directive. Bridgeluxwill not intentionally add the following restricted materials to NLX-5 die products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).NLX-5 BLUE POWER DIEBXCE 45 x 45 milPerformance vs. CurrentThe following curves represent typical performance of the BXCE NLX-5 blue power die. Actual performance will vary slightly for different power and dominant wavelength bins.Figure 1: Relative Luminous Intensity vs. Forward Current (device tested on a probe station)Figure 2: Forward Current vs. Forward Voltage (T j = 25°C)NLX-5 BLUE POWER DIEBXCE 45 x 45 mil0.00.51.01.52.02.5100200300400Forward C R e l a t i v e L u m i n o u s I n t e n s i t 5006007008009001000urrent, I f (mA)y N o r m a l i z e d a t 350 m A110100100012Forw F o r w a r d C u r r e n t , I f (m A )345ard Voltage, V f (V)Performance vs. Junction TemperatureThe following curves represent typical performance of the BXCE NLX-5 blue power die. Actual performance will vary slightly for different power and dominant wavelength bins.-0.40-0.35-0.30-0.25-0.20-0.15-0.10-0.050.00255075100125150Junction Temperature (ºC) F o r w a r d V o l t a g e S h i f t (V )N o r m a l i z e d a t 350m A ,T j 25°CFigure 3: Forward Voltage vs. Junction TemperatureFigure 4: Relative Light Output vs. Junction TemperatureNLX-5 BLUE POWER DIEBXCE 45 x 45 mil0%10%20%30%40%50%60%70%80%90%100%110%255075Junction R e l a t i v e L i g h t I n t e n s i t yN o r m a l i z e d a t 350m A ,T j 25°C100125150Temperature (ºC)0.00.51.01.52.02.53.03.54.04.55.0255075100125150Junction Temperature (ºC)W a v e l e n g t h S h i f t (n m )N o r m a l i z e d a t 350m A ,T j 25°CFigure 5: Wavelength Shift vs. Junction TemperatureTypical Radiation PatternFigure 6: Typical Radiation Pattern (350 mA Operation)NLX-5 BLUE POWER DIEBXCE 45 x 45 milCurrent Derating Curves01002003004005006007008000102030405060708090100110120Ambient Temperature, T a (o C)F o r w a r d C u r r e n t , I f (m A )Rja = 20 Deg C/WRja = 40 Deg C/WRja = 60 Deg C/WFigure 7: Current Derating Curve vs. Ambient Temperature (derating based on T j max 150°C)About BridgeluxBridgelux is a U.S. lighting company and leading developer of technologies and solutions that are transforming the global lighting industry. Based in Silicon Valley, Bridgelux is a pioneer in solid-state lighting (SSL), expanding the market for solid state lighting by driving down the cost of light through innovation.The company is a leading provider of high-power, cost-effective and energy-efficient light-emitting diode (LED) solutions. Focused on bringing innovation to light, Bridgelux’s proprietary epitaxytechnology, advanced chip designs and leading-edge LED packaging technology have enabled the company to develop advanced solid-state lighting (SSL) products that offer superior quality, are lower in cost and environmentally friendly—all without compromising performance.In addition to LED chips, Bridgelux’s patented light source technology replaces traditional lighting technologies (such as incandescent, halogen and fluorescent lamps) with integrated, solid-state solutions, enabling lamp and luminaire manufacturers to develop high performance and energy-efficient white light products.For more information about the company, please visit 。
曼斯特克 货物拆卸机 R1.4-2.5 系列 产品技术指南说明书
R1.4-2.5 Series23..4576(1) With load backrest 1000mm height, h4 + 508mm; with load backrest 1500mm height, h4 + 1008mm(2) All weights are: mast structures (weldment, cylinders, chain, pulley) + carriage + oil. EXCLUDED: forks, accessories.(3) With load backrest 700mm width, 1000mm height, weight + 13 kg; with load backrest 700mm width, 1500mm height, weight + 21kgAll values are nominal values and they are subject to tolerances. For further information, please contact the manufacturer .Hyster products may be subject to change without notice. Lift trucks illustrated may feature optional equipment. Values may vary with alternative configurations.R1.4, R1.6 & R1.6N - Standard Mast - 3 stage full free lift (1,400kg / 1,600kg)R2.0 & R2.5 - Standard Mast - 3 stage full free lift (2,000kg / 2,500kg)R1.6HD - Heavy Duty Mast - 3 stage full free lift (1,600kg)(1) With load backrest 1000mm height, h4 + 508mm; with load backrest 1500mm height, h4 + 1008 mm(1) With load backrest 1000mm height, h4 + 443mm; with load backrest 1500mm height, h4 + 943mm89(4) These values may vary of +/- 5%.R2.0HD - Heavy Duty Mast - 3 stage full free lift (2,000kg)(1) With load backrest 1000mm height, h4 + 443mm; with load backrest 1500mm height, h4 + 943mmR1.4, R1.6, R1.6N - Standard Mast - 4 stage full free lift (1,400kg / 1,600kg)(1) With load backrest 1000mm height, h4 + 508mm; with load backrest 1500mm height, h4 + 1008mm(1) With load backrest 1000mm height, h4 + 508mm; with load backrest 1500 mm height, h4 + 1008mm(2) All weights are: mast structures (weldment, cylinders, chain, pulley) + carriage + oil. EXCLUDED: forks, accessories.(3) With load backrest 700mm width, 1000mm height, weight + 13 kg; with load backrest 700mm width, 1500mm height, weight + 21kgAll values are nominal values and they are subject to tolerances. For further information, please contact the manufacturer .Hyster products may be subject to change without notice. Lift trucks illustrated may feature optional equipment. Values may vary with alternative configurations.R2.0, R2.5, R2.0HD - Standard Mast - 4 stage full free lift (2,000 / 2,500kg)1011(1) These values may vary of +/- 5%.(2) For Ast with mast 4 stg, see “Mast table 4stg 14-16” and “Mast table 4stg 20-25” (3) Li-Ion battery (4) Forks retracted.All weights (2.1 to 2.5) are with lowest mast and standard forks.All values are nominal values and they are subject to tolerances.For further information, please contact the manufacturer . Hyster products might be subject to change without notice.Lift trucks illustrated may feature optional equipment.Values may vary with alternative configurations.All values are nominal values and they are subject to tolerances.For further information, please contact the manufacturer . Hyster products might be subject to change without notice.Lift trucks illustrated may feature optional equipment.Values may vary with alternative configurations.(1) These values may vary of +/- 5%(2) Available Li-Ion battery 48V / 450Ah (895kg)(3) Available Li-Ion battery 48V / 450Ah (1067/1068kg); Li-Ion battery 48V / 600Ah (1091kg)(4) Forks retractedAll weights (2.1 to 2.5) are with lowest mast and standard forks.1213All values are nominal values and they are subject to tolerances.For further information, please contact the manufacturer . Hyster products might be subject to change without notice.Lift trucks illustrated may feature optional equipment.Values may vary with alternative configurations.All values are nominal values and they are subject to tolerances.For further information, please contact the manufacturer . Hyster products might be subject to change without notice.Lift trucks illustrated may feature optional equipment.Values may vary with alternative configurations.(1) These values may vary of +/- 5%(2) Available Li-Ion battery 48V / 450Ah (895kg)(3) Available Li-Ion battery 48V / 450Ah (1067/1068kg); Li-Ion battery 48V / 600Ah (1091kg)(4) Forks retracted(5) With load wheels lateral covers: 1489 mm (Wide), 1689 mm (Extra Wide) All weights (2.1 to 2.5) are with lowest mast and standard forks.(1) These values may vary of +/- 5%(2) Available Li-Ion battery 48V / 450Ah (895kg)(3) Available Li-Ion battery 48V / 450Ah (1067/1068kg); Li-Ion battery 48V / 600Ah (1091kg)(4) Forks retracted(5) With load wheels lateral covers: 1489 mm (Wide), 1689 mm (Extra Wide) All weights (2.1 to 2.5) are with lowest mast and standard forks.1514(1)I ncludes:- End of stroke slow down on lift - Soft stop on lowering - H eight controlled mast cushioning over Free Lift/Main lift mast section - Height indicator(2) 33 DIN C battery on R1.4 / R1.6 / R2.0 / R2.5 /R1.6HD / R2.0HD DIN B battery on R1.6Nx Standard o Optional- Not available。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
*: This is guaranteed as design value.
764
870 MHz
45
W
33
%
-40 dBc
-35 dBc
3:1
—
1
mA
1.5
W
No parasitic oscillation —
No degradation or destroy —
All parameters, conditions, ratings, and limits are subject to change without notice.
4
V GG2=5V Pin=50m W
3
INPUT VSWR ρin (-)
DRAIN CURRENTIDD(A)
OUTPUT POWER Pout(dBm) POWER GAIN Gp(dB)
2 ρ in
1
760 780 800 820 840 860 880 FREQUENCY f(MHz)
OUTPUT POWER, POWER GAIN and DRAIN CURRENT versus INPUT POWER
RA45H7687M1
MITSUBISHI ELECTRIC 2/9
18th Jan 2007
元器件交易网
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF POWER MODULE
MITSUBISHI ELECTRIC 1/9
18th Jan 2007
元器件交易网
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDPOWER MODULE
RoHS COMPLIANCE RA45H7687M1
• Enhancement-Mode MOSFET Transistors (IDD≅0 @ VDD=12.8V, VGG=0V)
• Pout>45W, ηT>33% @VDD=12.8V, VGG1=3.4V, VGG2=5V, Pin=50mW
5 RF Ground (Case)
PACKAGE CODE: H2M
元器件交易网
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF MOSFET MODULE
RA45H7687M1
RoHS Compliance, 764-870MHz 45W 12.8V, 2 Stage Amp. For MOBILE RADIO
60
24
50
Gp
40
Pout
20
16
30
12
20
10
0 -10
f=764M Hz
IDD
V DD=12.8V
V GG1=3.4V
V GG2=5V
-5
0
5
10 15
INPUT POW ER Pin(dBm)
8
4
0 20
DRAIN CURRENT IDD(A) OUTPUT POWER Pout(dBm)
RoHS COMPLIANCE RA45H7687M1
TYPICAL PERFORMANCE (Tcase=+25°C, ZG=ZL=50Ω, unless otherwise specified)
OUTPUT POWER Pout(W) TOTAL EFFICIENCY(%)
O UT PUT PO WER, T O T AL EFFICIENCY, versus FREQUENCY
• Module Size: 67 x 18 x 9.9 mm
• Linear operation is possible by setting the quiescent drain current with the gate voltages and controlling the output power with the input power.
DESCRIPTION
The RA45H7687M1 is a 45-watt RF MOSFET Amplifier Module for 12.8-volt mobile radios that operate in the 764- to 870-MHz range.
The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage 1 and the gate voltage 2(VGG1=VGG2=0V), only a small leakage current flows into the drain and the nominal output signal (Pout=45W) attenuates up to 60 dB. When fixed i.e. 3.4V, is supplied to the gate voltage 1, the output power and the drain current increase as the gate voltage 2 increases. The output power and the drain current increase substantially with the gate voltage 2 around 0V (minimum) under the condition when the gate voltage 1 is kept in 3.4V. The nominal output power becomes available at the state that VGG2 is 4V (typical) and 5V (maximum). At this point, VGG1 has to be kept in 3.4V. At VGG1=3.4V & VGG2=5V, the typical gate currents are 0.4mA. This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltages and controlling the output power with the input power.
VGG2<5V, VDD<12.8V, Pin=50mW
VGG2 Gate Voltage 2
VGG1=3.4V ± 7%, VDD<12.8V, Pin=50mW
Pin Pout Tcase(OP)
Input Power Output Power Operation Case Temperature Range
-30
V DD=12.8V
V GG1=3.4V
-40
V GG2=5V
Pin=50m W
-50
-60
3 rd 2nd
-70
-80 760 780 800 820 840 860 880 FREQUENCY f(MHz)
INPUT VSWR v e rsus FREQ UENCY
5
V DD=12.8V
V GG1=3.4V
BLOCK DIAGRAM
2
3
1
4
5
1 RF Input added Gate Voltage 1(Pin&VGG1) 2 Gate Voltage 2(VGG2), Power Control
3 Drain Voltage (VDD), Battery
FEATURES
4 RF Output (Pout)
RoHS COMPLIANCE
• RA45H7687M1 is a RoHS compliant product. • RoHS compliance is indicate by the letter “G” after the Lot Marking. • This product include the lead in the Glass of electronic parts and the
MAXIMUM RATINGS (Tcase=+25°C, ZG=ZL=50Ω, unless otherwise specified)
SYMBOL PARAMETER
CONDITIONS
VDD Drain Voltage
VGG1=3.4V ± 7%, VGG2<5V, Pin=0W
VGG1 Gate Voltage 1
Pout1 Output Power 1
VDD=12.8V, VGG1=3.4V, VGG2=5V, Pin=50mW
ηT 2fo 3fo ρin IDD Pout2
—
—
Total Efficiency 2nd Harmonic 3nd Harmonic Input VSWR Leakage Current Output Power 2*
• Broadband Frequency Range: 764-870MHz
• Metal cap structure that makes the improvements of RF radiation simple
• Low-Power Control Current IGG1+IGG2=0.4mA (typ) @ VGG1=3.4V, VGG2=5V