BLM31PG601SN1磁珠规格书
CMBP系列贴片铁氧体磁珠商品说明书
●EXTERNAL DIMENSIONS UNIT：mm（外形尺寸）
PART NO. CMBP0402 CMBP0603 CMBP0805 CMBP1206
A 1.0±0.15 1.6±0.15 2.0(+0.3,-0.1) 3.2±0.2
B 0.5±0.15 0.8±0.15 1.25±0.2 1.6±0.2
CMBP0603- 600 60±25%
CMBP0603- 750 75±25%
CMBP0603- 121 120±25%
CMBP0603- 221 220±25%
CMBP0603- 601 600±25%
MHz Freq, 100 100 100 100 100 100
CMBP0805 TYPE
Max.DC Resistance 直流电阻
Design As Customers Requested Specifications 可根据客户需求设计
电感专业制造商 CMBP系列贴片铁氧体磁珠
CMBP0402 TYPE
Part Number 型号
Inductance 阻抗
Z Test Frequency
阻抗的测试频率
Units 单位 Symbol 符号 CMBP0402- 100
抑制效果，两种铁氧体材料、阻抗范围宽。适用于不同的电子线路 Internal silver printed layers and magnetic shielded structures to minimize crosstalk,Can be used in a wide range of frequency(from dozens of MHz to hundreds of MHz)to suppress EMI,Two types material and wide range of impedance values for various applications
村田Murata BL磁珠命名方式
*1 Frequency characteristics vary with each code.
oPackaging Code K L B J D Packaging Embossed Taping (ø330mm Reel) Embossed Taping (ø180mm Reel) Bulk Paper Taping (ø330mm Reel) Paper Taping (ø180mm Reel) BLM21 *1/31/41 All Series BLM03/15/18 *3/21 *2, BLA2A/31 BLM02/03/15/18/21 *2, BLA2A/31 Series
BL p
(Part Number)
Chip Ferrite Bead
M w 18 e AG r 102 t S
Part Numbering
N 1 D
tImpedance Expressed by three figures. The unit is in ohm (Ω) at 100MHz. The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. yElectrode
rCharacteristics/Applications Code *1 AG AX TG BA BB BC BD PD PG PX KG SG RK HG EG HB HD HE HK GA GG for GHz Band Digital Interface for High-GHz Band High-speed Signal Lines for High-GHz Band General Use for GHz Band High-speed Signal Lines for Power Supplies (Low DC Resistance Type) for Digital Interface for GHz Band General Use for GHz Band General Use (Low DC Resistance Type) for Power Supplies for High-speed Signal Lines for General Use Characteristics/Applications BLM03/15 BLM18 BLM15/18 BLM03/15/18/21, BLA2A BLM03/15 BLM03/15/18/21, BLA2A/31 BLM15 BLM03/15/18/21/31/41 BLM03/15 BLM18 BLM18/21 BLM03/15/18 BLM15/18 BLM15/18 BLM03/15/18 BLM18 BLM18 BLM15 BLM15/18 Series BLM02/03/15/18/21, BLA2A/31
BLM21AG102SN1磁珠规格书
EG
For GHz Band General Use (Low DC Resistance Type)
HB
HD
For GHz Band High-speed Signal Lines
HE
GA
For High-GHz Band High-speed Signal Lines
GG
For High-GHz Band General Use
Type DC Bias Characteristics Improved Type
Ferrite Bead Single Type
eDimensions (LgW)
Code
Dimensions (LgW)
03
0.6g0.3mm
15
1.0g0.5mm
18
1.6g0.8mm
21
2.0g1.25mm
31
0402
For High Speed Signal (Sharp impedance characteristics)
For Large Current For Standard
GHz Range
For High Speed Signal
For Standard (Low DC
Resistance Type)
1400±40%
1000±25%
2000±40%
1800±25%
2700±40%
120±25%
145 (Typ.)
220±25%
270 (Typ.)
120±25%
-
150±25%
-
220±25%
-
330±25%
-
470±25%
BLM31PG391SN1磁珠规格书
yElectrode Expressed by a letter.
Ex.)
Code
S/T
A
W
Electrode Sn Plating Au Plating
Ag/Pd
uCategory Code Z H
For Automotive
Category Infotainment
Powertrain, SafeSignal (Sharp impedance characteristics)
For Large Current For Standard
GHz Range
For High Speed Signal
For Standard (Low DC
Resistance Type)
Type DC Bias Characteristics Improved Type
Ferrite Bead Single Type
eDimensions (LgW)
Code
Dimensions (LgW)
03
0.6g0.3mm
15
1.0g0.5mm
18
1.6g0.8mm
21
2.0g1.25mm
31
Impedance (Ω)
at 100MHz
at 1GHz
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
240±25%
-
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
220±25%
-
600±25%
-
1000±25%
-
600±25%
BLM15HD182SN1磁珠规格书
BD
BX
PD
PG For Power Lines
PN
PX
KG For Power Lines (Low DC Resistance Type)
SG
HG
For GHz Band General Use
EB
For GHz Band High-speed Signal Lines (Low Direct Current Type)
Chip Ferrite Bead for Automotive Part Numbering
(Part Number)
BL M 18 AG 102 S Z 1 D q w e r t y u io
qProduct ID Product ID BL
Chip Ferrite Beads
wType Code E M
Impedance (Ω)
at 100MHz
at 1GHz
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
240±25%
-
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
220±25%
-
600±25%
-
1000±25%
-
600±25%
140 (Typ.)
1000±25%
300 (Typ.)
0402
For High Speed Signal (Sharp impedance characteristics)
For Large Current For Standard
GHz Range
For High Speed Signal
陶瓷贴片电容丶贴片电感丶片式磁珠命名规则与基本知识
陶瓷贴片电容、贴片电感.片式磁珠muRuta村田命名规则与基本知识一、村田陶瓷贴片电容知识M名衣示法如卜：片状独们盹瓷电容器GRM 15.3R7K 225KE15D•GRM—农示儀锡电极：卄通貼片期瓷12容•常用的村｝ 11容就是GRM艸通贴片海瓷电容与GNM卄通贴片搏容：•18——衣示尺寸（长*宽）:1.6*0.8mm即内通用尺对衣示是（K*审）1.6*0.8mm （单位为mm：c词阿卜通用尺、J A示是用英寸0603 （单位为inch；，卜J E询常用代码仃03、15、18、21、31、32、42、43、55〕；，II 体的对应值如卜I03-...0.6*0.3mm- (0201)15——1.0*0.5mm~-040218-...1.6*0.8mm- (0603)21-—2.0# 1.25mm——080531一“3.2* 1.6mm—120632-—3.2* 1.5mm一・121042一.5*2.0mm——180843 …45*3・2mm•—181255—5.7 拿5・0mm——2220•8——衣示用度（T：: 0.8mm常用厚度村田代码仃5、6、8、9、B、C、E：'h貝㈱对应值如卜：5-…0.5mm 6-…0.6mm 8-…0.8mm 9-…0.9mm B-…1.25mm C-…1.6mm E -—2.5mm•R7——农示材质：X7R常用材质村t：代码有5C、R6、R7、F5等,R体的对应值如卜：5C--COG/NPO/CHR6——X5RR7——X7RF5・——Y5V5C I仆温度是・55度一+125必温度系敌是0+・30ppm/gR6 I作泪度是・55度一H85度，SH度系数是+-15%:R7 1作温度是・55度一H25度,温度系数好+15%:F5 I作fiU是・30度—85度.温度系数是+22 -82%lOOpfW卜小容fi*L般采比5C材頂，100PF—luf人一般采用R7材质，luf以上一股采用R6材质,櫛S®求不禹的般采用F5材质。
CBW系列大电流贴片磁珠规格书
FERRITE CHIP BEADS
FERRITE CHIP BEADS
OPEARATING TEMP. -40 +85
FEATURES:
PCB EIA SMT EMI RFI
A unique terminal electrode structure ensures ensures permissible current 6.0A (max). High impedance and EMI suppression effective over a wide frequency range. Suitable reflow and wave soldering.
unit mm(inch) D 0.25 (0.010 0.3 (0.01 0.5 (0.020 0.5 (0.020 0.5 (0.020 0.5 (0.020 0.5 (0.020 0.10 0.004) 0.2 0.008) 0.3 0.012) 0.3 0.012) 0.3 0.012) 0.3 0.012) 0.3 0.012)
CBW
MULTILAYER CHIP POWER BEADS
SHAPE AND DIMENSIONS
Part No. 100505 (0402) 160808 (0603) 201209 (0805) 321609 L W T (1206) 322513 (1210) 451616 (1806) D 453215 (1812) 1.0 (0.040 1.6 (0.063 2.0 (0.079 3.2 (0.126 3.2 (0.126 4.5 (0.186 4.5 (0.180 L 0.15 0.006) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.5 (0.020 0.8 (0.031 1.2 (0.047 1.6 (0.063 2.5 (0.098 1.6 (0.063 3.2 (0.126 W 0.15 0.006) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.5 (0.020 0.8 (0.031 0.9 (0.035 0.9 (0.035 1.3 (0.051 1.6 (0.063 1.5 (0.060 T 0.15 0.006) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.2 0.008) 0.2 0.008)
ABI-310使用说明
ABI PRISM310型基因分析仪说明书发布日期：2010-11-17 来源：丁香通浏览次数：1487DNA序列测定分手工测序和自动测序，手工测序包括Sanger双脱氧链终止法和Maxam-Gilbert化学降解法。
自动化测序实际上已成为当今DNA序列分析的主流。
美国PE ABI公司已生产出373型、377型、310型、3700和3100型等DNA测序仪，其中310型是临床检测实验室中使用最多的一种型号。
本实验介绍的是ABI PRISM 310型DNA测序仪的测序原理和操作规程。
DNA序列测定分手工测序和自动测序，手工测序包括Sanger双脱氧链终止法和Maxam-Gilbert化学降解法。
自动化测序实际上已成为当今DNA序列分析的主流。
美国PE ABI公司已生产出373型、377型、310型、3700和3100型等DNA测序仪，其中310型是临床检测实验室中使用最多的一种型号。
本实验介绍的是ABI PRISM 310型DNA测序仪的测序原理和操作规程。
【原理】ABI PRISM 310型基因分析仪(即DNA测序仪)，采用毛细管电泳技术取代传统的聚丙烯酰胺平板电泳，应用该公司专利的四色荧光染料标记的ddNTP(标记终止物法)，因此通过单引物PCR测序反应，生成的PCR产物则是相差1个碱基的3'末端为4种不同荧光染料的单链DNA混合物，使得四种荧光染料的测序PCR产物可在一根毛细管内电泳，从而避免了泳道间迁移率差异的影响，大大提高了测序的精确度。
由于分子大小不同，在毛细管电泳中的迁移率也不同，当其通过毛细管读数窗口段时，激光检测器窗口中的CCD(charge-coupled device)摄影机检测器就可对荧光分子逐个进行检测，激发的荧光经光栅分光，以区分代表不同碱基信息的不同颜色的荧光，并在CCD摄影机上同步成像，分析软件可自动将不同荧光转变为DNA序列，从而达到DNA测序的目的。
分析结果能以凝胶电泳图谱、荧光吸收峰图或碱基排列顺序等多种形式输出。
PBY201209T-601Y-N叠层片式铁氧体磁珠规格书
Shape and Dimensions
Recommended Pattern
Dimensions in mm TYPE 060303 100505 160805 160808 201209 321611 ：UPB A 0.60.03 1.00.10 1.60.15 1.60.15 2.00.20 3.20.20 B 0.300.03 0.500.10 0.800.15 0.800.15 1.250.20 1.600.20 C 0.30.03 0.50.10 0.50.15 0.80.15 0.90.20 1.10.20 D 0.150.05 0.250.10 0.30.2 0.30.2 0.50.3 0.50.3
FREQUENCY (MHz) RDC<0.18 Ω Rated Current :500 mA
PBY060303T-241Y-N
350 300 250 200 150 100 50 0 1 10
IMPEDANCE(Ω)
Z
X R
100 1000
FREQUENCY (MHz) RDC<0.4 Ω Rated Current :350 mA
Multilayer Ferrite Chip Beads
DCY offers a wide ran ge of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for EMI solutions. These ferrite formulas are used to compose seven types of EMI suppression chip beads: SB, GB, PB, UPB, NB, HF, and VPB series.
BLM18HG471SN1磁珠规格书
Series BLM03/15/18/21 BLM03/15 BLM15/18 BLM03/15/18/21 BLM03/15 BLM03/15/18/21 BLM15 BLM15 BLM03/15/18/21/31/41 BLE32 BLM03/15
BLM18
BLM03/15/18 BLM03 BLM15/18 BLM03/15/18 BLM03/15/18 BLM18 BLM15 BLM15/18
470 470 470 470 470 470 470 420 420
400
330 330
330 330
240
220 220 220 220 220 220 220 220
200
150 150
150 150
140
120 120 120 120 120 120 120 120 120
100
70 70
75 75 75 60 60
200
100 500 700
500
300 500 200 300 200
200
Size (EIA Code)
Type
For High Speed Signal (Sharp impedance characteristics)
For Digital Interface
0603
For Large Current For Standard
Chip Ferrite Bead for Automotive Part Numbering
(Part Number)
BL M 18 AG 102 S Z 1 D q w e r t y u io
qProduct ID Product ID BL
BLM18AG102SN1磁珠规格书
Impedance (Ω)
at 100MHz
at 1GHz
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
240±25%
-
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
220±25%
-
600±25%
-
1000±25%
-
600±25%
140 (Typ.)
1000±25%
300 (Typ.)
Chip Ferrite Bead for Automotive Part Numbering
oPackaging
Code
Packaging
K
Embossed Taping (ø330mm Reel)
L
Embossed Taping (ø180mm Reel)
B
Bulk
For High Speed Signal
GHz Range
For Digital Interface
For Standard (Low DC
Resistance Type)
0805
For Standard
Part Number
BLM18BB151SN1 BLM18BD151SN1 BLM18BB221SN1 BLM18BD221SN1 BLM18BB331SN1 BLM18BD331SN1 BLM18BD421SN1 BLM18BB471SN1 BLM18BD471SN1 BLM18BD601SN1 BLM18BD102SN1 BLM18BD152SN1 BLM18BD182SN1 BLM18BD222SN1 BLM18BD252SN1 BLM18RK121SN1 BLM18RK221SN1 BLM18RK471SN1 BLM18RK601SN1 BLM18RK102SN1 BLM18PG300SN1 BLM18PG330SN1 BLM18PG600SN1 BLM18PG121SN1 BLM18PG181SN1 BLM18HG471SN1 BLM18HG601SN1 BLM18HG102SN1 BLM18HB121SN1 BLM18HB221SN1 BLM18HB331SN1 BLM18HD471SN1 BLM18HD601SN1 BLM18HD102SN1 BLM18HK331SN1 BLM18HK471SN1 BLM18HK601SN1 BLM18HK102SN1 BLM18EG101TN1 BLM18EG121SN1 BLM18EG221TN1 BLM18EG331TN1 BLM18EG391TN1 BLM18EG471SN1 BLM18EG601SN1 BLM18GG471SN1 BLM21AG121SN1 BLM21AG151SN1 BLM21AG221SN1 BLM21AG331SN1 BLM21AG471SN1 BLM21AG601SN1 BLM21AG102SN1
磁珠规格书
Part No.
CBW160808U110 CBW160808U190 CBW160808U260 CBW160808U310 CBW160808U800 CBW160808U101 CBW160808U121 CBW160808U151 CBW160808U181 CBW160808U221 CBW160808U301 CBW160808U501 CBW160808U601 CBW160808U801 CBW160808U102 CBW160808U122 CBW160808U152 CBW160808U182 CBW160808U202
CBW322513U190 CBW322513U260 CBW322513U310 CBW322513U600 CBW322513U800 CBW322513U121 CBW322513U151 CBW322513U181 CBW322513U221 CBW322513U301 CBW322513U501 CBW322513U601 CBW322513U801 CBW322513U102
Impedance(Ω)
At 100MHz 26±25% 31±25% 60±25% 80±25% 100±25% 150±25% 180±25% 200±25% 300±25% 500±25% 600±25% 800±25% 1000±25% 1200±25%
3225 型 TYPE
Part No.
Impedance(Ω)
At 100MHz 26±25% 31±25% 75±25% 90±25% 120±25% 150±25% 220±25% 300±25% 500±25% 600±25% 850±25%
4532 型 TYPE
佳邦磁珠
PRODUCT DETAIL Electrical CharacteristicsTest InstrumentsZ Ω (Ref. Page 6~8) DCR Ω(Ref. Page 6~8) IDCmA(Ref. Page 6~8) TEST FREQ: MHz(Ref. Page 6~8)TEST LEVEL: 250 mV•HP4291BRF IMPEDANCE / MATERIAL ANALYZER •HP4338A/B MILLIOHMMETER •Agilent 8720ES S-PARAMETER NETWORK ANALYZER•HP6632B SYSTEM DC POWER SUPPLYPART NUMBER CODEMHC 1608 S 12 1 P B P 1 2 3 4 5 6 7 8 1 Series Name2 Size Code: the first two digitals : length(mm), the last two digitals : width(mm)3 Product Characteristics : S = For Standard4 Impedance(Ω) ± 25%5 Fixed Decimal Point6 Rated Current Code7 Soldering : Green Parts: A— Soldering Lead-Free B— Lead-Free for whole chip 8 Packaging: P - Embossed paper tape, 7" reel. E - Embossed plastic tape, 7" reel.L =1000mA M =1500mA N =2000mA P =2500mAQ =3000mA R =4000mA U =5000mA W =6000mA (ex ：600=60Ω ；121=120Ω)TAPE AND REEL SPECIFICATIONSPLASTIC CARRIERPAPER CARRIERTAPING DIMENSIONSUnit: mmSize4532 4516 3225 3216 2012 1608 1005Symbol PLASTIC PLASTIC PLASTIC PLASTICPAPER PAPER PAPER W12.0±0.10 11.7~12.3 7.70~8.307.90~8.308.00±0.108.00±0.108.00±0.10 P 8.00±0.10 4.00±0.10 4.00±0.10 4.00±0.10 4.00±0.10 4.00±0.10 2.00±0.05 E 1.75±0.10 1.75±0.10 1.75±0.10 1.75±0.10 1.75±0.10 1.75±0.10 1.75±0.05 F 5.50±0.05 5.50±0.05 3.50±0.05 3.50±0.05 3.50±0.10 3.50±0.10 3.50±0.05 D1.55±0.05 1.55±0.05 1.55±0.05 1.55±0.051.56±0.10 1.56±0.10 1.55±0.05 D1 1.50~1.75 1.50~1.75 0.95~1.200.95~1.20NA NA NA Po 4.00±0.10 4.00±0.10 4.00±0.10 4.00±0.10 4.00±0.10 4.00±0.104.00±0.10Po10 40.0±0.20 40.0±0.20 40.0±0.2040.0±0.2040.0±0.20NA NAP2 2.00±0.05 2.00±0.05 2.00±0.05 2.00±0.05 2.00±0.10 2.00±0.10 2.00±0.05 Ao 3.66±0.10 1.83±0.10 2.57±0.10 1.85±0.10 1.50±0.05 1.05±0.050.62±0.03 Bo4.95±0.10 4.85±0.10 3.40±0.10 3.43±0.102.30±0.05 1.85±0.05 1.12±0.03 Ko(T) 1.83±0.10 1.83±0.10 1.32±0.10 1.22±0.100.95±0.050.95±0.050.60±0.03t0.23±0.10 0.29±0.10 0.25±0.100.25±0.10NA NA NAREEL DIMENSIONSUnit: mmReel Packaging Quantity PART SIZE (EIA SIZE) 1005 (0402)1608 (0603)2012 (0805)3216 (1206)3225 (1210)4516 (1806)4532 (1812)7” REELQty. (pcs)10,000 4,000 4,000 3,000 2,000 2,000 1,000The Contents of a box :4532(1812): 4 reels / inner box; 4516(1806): 4 reels / inner box; 3225(1210): 5 reels / inner box; 3216(1206): 5 reels / inner box; 2012(0805): 5 reels / inner box; 1608(0603): 5 reels / inner box; 1005(0402): 5 reels / inner box.RECOMMENDED SOLDERING CONDITIONSLAND PATTERNS FOR REFLOW SOLDERINGSOLDER LAND INFORMATION Unit: mm (inches)RELIABILITY AND TEST CONDITIONTest itemTest conditionCriteriaTemperature Cyclea. Temperature : -40 ~ +85℃b. Cycle : 100 cyclesc. Dwell time : 30minutesd.Measurement : at ambient temperature 24 hrs after test completiona. No mechanical damageb. Impedance value should be within ± 20 % of the initial valueOperational Lifea. Temperature : 125℃ ± 5℃b. Test time : 1000 hrsc. Apply current : full rated currentd.Measurement : at ambienttemperature 24 hrs after testcompletiona. No mechanical damageb. Impedance value should bewithin ± 20 % of the initialvalueBiased Humiditya. Temperature : 40℃ ± 2℃b. Humidity : 90 ~ 95 % RHc. Test time : 1000 hrsd. Apply current : full rated currente.Measurement : at ambient temperature 24 hrs after test completiona. No mechanical damageb. Impedance value should be within ± 20 % of the initial valueSize A B C0.4 ～ 0.6 1.6 ～ 2.6 0.4 ～ 0.7 1005 (0.015 ～ 0.023) (0.063 ～ 0.102) (0.016 ～ 0.027) 0.5 ～ 0.7 2.1 ～ 3.1 0.65 ～ 0.95 1608 (0.019 ～ 0.027) (0.083 ～ 0.122) (0.026 ～ 0.037) 1.0 ～ 1.2 3.0 ～ 4.0 0.8 ～ 1.1 2012 (0.039 ～ 0.047) (0.118 ～ 0.157) (0.031 ～ 0.043) 2.0 ～ 2.4 4.2 ～ 5.2 1.0 ～ 1.4 3216 (0.079 ～ 0.094) (0.165 ～ 0.204) (0.039 ～ 0.055) 2.1 ～ 2.3 4.2 ～ 5.2 2.2 ～ 2.5 3225 (0.082 ～ 0.090) (0.165 ～ 0.204) (0.086 ～ 0.098) 3.4 ～ 3.7 6.3 ～ 7.3 1.3 ～ 1.7 4516 (0.133 ～0.145) (0.248 ～ 0.287) (0.051 ～ 0.067) 3.4 ～ 3.7 6.3 ～ 7.3 2.9 ～ 3.2 4532(0.133 ～0.145) (0.248 ～ 0.287)(0.144 ～ 0.126)Resistance to Solder Heat a. Solder temperature : 260 ± 5℃b. Flux : Rosinc. DIP time : 10 ± 1 seca. More than 95 % of terminal electrode should be covered with new solderb. No mechanical damagec. Impedance value should be within ± 20 % of the initial valueAdhesive Testa. Reflow temperature : 245℃ It shall be Soldered on thesubstrate applying direction paralle1 to the substrateb. Apply force(F) : 5 Nc. Test time : 10 seca. No mechanical damageb. Soldering the products on PCB after the pulling test force > 5 NGENERAL TECHNICAL DATAOperating temperature range : - 55℃ ~ +125℃ Storage Condition : Less than 40℃ and 70% RH Storage Time: 6 months(Size:1005) 12 months(Size:1608 above) Soldering method: Reflow or Wave SolderingTest itemTest condition CriteriaSteam Aging Testa. Temperature : 93℃b. Test time : 4 hrs(MHC1005)Others : 8 hrsc. Solder temperature : 235 ± 5℃d. Flux : Rosine. DIP time : 5 ± 1 secMore than 95 % of terminal electrode should be covered withnew solder Rated Current Testa. Apply current : full ratedcurrent / 5minTemperature rise should be less than 40℃PART NUMBER AND CHARACTERISTICS TABLEImpedance (Ω)+/-25% Test Freq. (MHz) DCR(Ω) (Max.) Rated Current(mA)MHC1005 SeriesMHC1005S100NB_ 10 100 0.09 2000 MHC1005S300NB_ 30 100 0.09 2000 MHC1005S600LB_ 60 100 0.2 1000 MHC1005S121MB_ 120 100 0.15 1500 MHC1608 SeriesMHC1608S300QB_ 30 100 0.04 3000 MHC1608S600QB_ 60 100 0.04 3000 MHC1608S800QB_ 80 100 0.04 3000 MHC1608S121PB_ 120 100 0.07 2500 MHC1608S221NB_ 220 100 0.09 2000 MHC1608S301NB_ 300 100 0.09 2000 MHC1608S471LB_ 470 100 0.20 1000 MHC1608S601LB_ 600 100 0.20 1000 MHC2012 SeriesMHC2012S110WB_ 11 100 0.015 6000 MHC2012S310WB_ 31 100 0.015 6000 MHC2012S400RB_ 40 100 0.03 4000 MHC2012S600QB_ 60 100 0.04 3000 MHC2012S800UB_ 80 100 0.02 5000 MHC2012S900UB_ 90 100 0.02 5000 MHC2012S121UB_ 120 100 0.02 5000 MHC2012S221QB_ 220 100 0.04 3000 MHC2012S251QB_ 250 100 0.04 3000 MHC2012S301NB_ 300 100 0.09 2000 MHC2012S331NB_ 330 100 0.09 2000 MHC2012S601NB_ 600 100 0.09 2000Impedance (Ω)+/-25%Test Freq. (MHz)DCR(Ω) (Max.)Rated Current(mA)MHC3216 SeriesMHC3216S300WB_ 30 100 0.015 6000 MHC3216S500WB_ 50 100 0.015 6000 MHC3216S600QB_ 60 100 0.04 3000 MHC3216S750QB_ 75 100 0.04 3000 MHC3216S800RB_ 80 100 0.03 4000 MHC3216S900QB_ 90 100 0.04 3000 MHC3216S121WB_ 120 100 0.015 6000 MHC3216S151NB_ 150 100 0.09 2000 MHC3216S501PB_ 500 100 0.07 2500 MHC3216S601PB_ 600 100 0.07 2500 MHC3216S122LB_ 1200 100 0.2 1000 MHC3225 SeriesMHC3225S600MB_ 60 100 0.15 1500 MHC3225S102NB_ 1000 50 0.09 2000 MHC4516 seriesMHC4516S600WB_ 60 100 0.015 6000 MHC4516S471NB_ 470 100 0.09 2000 MHC4516S851MB_ 850 100 0.15 1500 MHC4532 seriesMHC4532S800WB_ 80 100 0.015 6000 MHC4532S121WB_ 120 100 0.015 6000 MHC4532S601QB_ 600 50 0.04 3000 MHC4532S681QB_ 680 50 0.04 3000 MHC4532S132QB_ 1300 60 0.04 3000** For special part number which is not shown in the above table, please refer to appendix.PART COMPOSITION DECLARATION。
平尚大电流贴片磁珠规格书
3216 型 TYPE
Part No.
CBW321609U050 CBW321609U090 CBW321609U110 CBW321609U190
Impedance(Ω) At 100MHz
0~6
7~10 11±25% 19±25%
DCR (Ω)Max
0.03 0.05 0.06 0.08 0.15 0.20 0.25 0.25 0.40 0.50 0.65 0.70 0.90
DCR (Ω)Max
0.04 0.04 0.05 0.05
Ir (A)Max
1.00 0.80 0.75 0.70 0.65 0.65 0.45 0.45 0.35 0.30 0.25 0.20 0.20
Ir (A)Max
1.5 1.5 1.2 1.0 1.0 1.0 0.8 0.8 0.8 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.4 0.4 0.4
应用 ＡＰＰＬＩＣＡＴＩＯＮＳ
·数字视听产品、车用电子设备、通讯设备、OA
设备和其它。
·Digital videos 、communication equipment 、OA equipment and others.
产品规格型号的表示方法 ＯＲＤＥＲＩＮＧ ＣＯＤＥ
CBW 201209
U 121Dຫໍສະໝຸດ R (Ω)Max0.05 0.06 0.08 0.10 0.12 0.15 0.20 0.20 0.25 0.30 0.30 0.30 0.40 0.45 0.60 0.70 0.80 0.80 1.00
DCR (Ω)Max
0.03 0.03 0.03 0.05 0.05 0.05 0.05 0.10 0.10 0.15 0.15 0.20 0.20 0.25 0.30 0.40 0.45 0.50
免疫磁珠说明书
Contents1. Description1.1 Principle of the MACS® Separation1.2 Background information1.3 Applications1.4 Reagent and instrument requirements试剂和仪器的要求2. Protocol2.1 Sample preparation样品制备2.2 Magnetic labeling磁性标记2.3 Magnetic separation磁性分离3. Example of a separation using the CD133 MicroBead Kit4. References1. DescriptionComponents 2 mL CD133 MicroBeads, human:MicroBeads conjugated to monoclonal antihumanCD133 antibodies (isotype: mouse IgG1,clone AC133).2 mL FcR Blocking Reagent, human Specificity CD133 antigen, epitope (CD133/1)1.Capacity For 2亊10⁹total cells, up to 100 separations.Product format CD133 MicroBeads are supplied in buffercontaining stabilizer and 0.05% sodium azide.Storage Store protected from light at 2−8 °C. Do not freeze. The expiration date is indicated on the vial label.1.1 Principle of the MACS® SeparationFirst, the CD133+ cells are magnetically labeled with CD133MicroBeads. Then, the cell suspension is loaded onto a MACS®Column, which is placed in the magnetic field of a MACS Separator.The magnetically labeled CD133+ cells are retained within thecolumn. The unlabeled cells run through; this cell fraction isthus depleted of CD133+ cells. After removing the column fromthe magnetic field, the magnetically retained CD133+ cells can beeluted as the positively selected cell fraction. To increase the purity,the positively selected cell fraction containing the CD133+ cells isseparated over a second column.1.2 Background informationThe CD133 MicroBead Kit is a magnetic labeling system designedfor the positive selection of CD133+ cells. It allows the single-stepisolation of nonhematopoietic and early hematopoietic progenitors and stem cells. The CD133 molecule is a 5-transmembrane cellsurface antigen with a molecular weight of 117 kD.2 The CD133/1(clone AC133) antibody recognizes epitope 1 of the CD133 antigen.1In the hematopoietic system, CD133 expression is restricted to asubset of CD34bright stem and progenitor cells in human fetal liver,bone marrow, cord blood, and peripheral blood.3 Isolated fromhematopoietic sources, CD133+ cells can become adherent and arereported to become CD133–during culture⁴. The CD34+CD133+cell population, which includes CD34+CD38–cells, was shown tobe capable of repopulating NOD/SCID mice.⁵Recently, CD133has also been found to be expressed on circulating endothelialprogenitor cells⁶,⁷and fetal neural stem cells⁸,⁹as well as on othertissue-specific stem cells, such as renal1⁰and prostate11 stem cells.Lately, when isolated from tumor tissue, the CD133+ populationcan be enriched for tumor-initiating cells.11-1⁵CD133 MicroBeadshave been used to isolate adult stem cells from cord blood and asa starting population for reprograming towards iPS cells.1⁶CD133expression has been found on undifferentiated human ES cells.Therefore CD133 MicroBeads could be used for enrichment ordepletion of these cells.1⁷1.3 Applications●Positive selection or depletion of cells expressing human CD133antigen.●Isolation or depletion of CD133+ cells from peripheral bloodmononuclear cells (PBMCs) or single-cell suspensions fromtissue.●CD133+ cells are used in basic stem cell research, stem cellevaluation, stem cell expansion, research in hematologicalmalignancies, stem cell plasticity, and potential cellulartherapies as well as in tissue regeneration and cancer research.1.4 Reagent and instrument requirements●Buffer: Prepare a solution containing phosphate-buffered saline(PBS), pH 7.2, 0.5% bovine serum albumin (BSA), and 2 mMEDTA by diluting MACS BSA Stock Solution (# 130‑091-376)1:20 with autoMACS Rinsing Solution (# 130-091-222). Keepbuffer cold (2−8 °C). Degas buffer before use, as air bubblescould block the column.▲Note: EDTA can be replaced by other supplements such as anticoagulant citrate dextrose formula-A (ACD-A) or citrate phosphate dextrose (CPD). BSA can be replaced by other proteins such as human serum albumin, human serum, or fetal bovine serum (FBS). Buffers or media containing Ca2+ or Mg2+ are not recommended for use.●(Optional) Fluorochrome-conjugated antibodies forflow cytometric analysis, e.g., CD133/2 (293C3)-PE(# 130-090-853), CD133/2 (293C3)-APC (# 130-090-854),CD133/2 (293C3)‑Biotin, CD34-FITC (# 130-081-001),CD34‑APC (# 130-090-954), or CD34-PE (# 130-081-002). Formore information about fluorochrome-conjugated antibodiessee .●MACS Columns and MACS Separators: CD133+ cells can beEnriched浓缩by using MS, LS, or XS Columns or depleted withthe use of LD, CS, or D Columns. Cells which strongly expressthe CD133 antigen can also be depleted using MS, LS, or XSColumns. Positive selection正向or depletion can also be performedby using the autoMACS Pro or the autoMACS Separator.▲Note: Column adapters are required to insert certain columns into theV arioMACS™or SuperMACS™Separators. For details see the respective MACS Separator data sheet.●(Optional) Propidium Iodide Solution (# 130-093-233) or7-AAD for flow cytometric exclusion of dead cells.●(Optional) Dead Cell Removal Kit (# 130-090-101) for thedepletion of dead cells.●(Optional) Pre-Separation Filters (# 130-041-407) to removecell clumps团.2. Protocol2.1 Sample preparationWhen working with anticoagulated peripheral blood or buffy coat,peripheral blood mononuclear cells (PBMCs) should be isolated bydensity gradient centrifugation, for example, using Ficoll-Paque™.▲Note: To remove platelets after density gradient separation, resuspend cell pellet in buffer and centrifuge at 200×g for 10−15 minutes at 20 °C. Carefully aspirate supernatant. Repeat washing step.When working with tissues or lysed blood, prepare a single-cellsuspension using standard methods.For details see the protocols section at /protocols.For preparation of cord blood cells, bone marrow cells, or cellsfrom leukapheresis material, please refer to the sample preparationprotocols at /protocols.▲Dead cells may bind non-specifically to MACS MicroBeads.To remove dead cells, we recommend using density gradientcentrifugation or the Dead Cell Removal Kit (# 130-090-101).2.2 Magnetic labeling▲Work fast, keep cells cold, and use pre-cooled solutions. This willprevent capping of antibodies on the cell surface and non-specificcell labeling.▲V olumes for magnetic labeling given below are for up to10⁸total cells. When working with fewer than 10⁸cells, use the same volumes as indicated. When working with higher cell numbers,scale up all reagent volumes and total volumes accordingly (e.g.for 2亊10⁸total cells, use twice the volume of all indicated reagent volumes and total volumes).▲For optimal performance it is important to obtain a single‑cell suspension before magnetic labeling. Pass cells through 30 μm nylonmesh (Pre-Separation Filters, # 130-041-407) to remove cell clumpswhich may clog the column. Moisten filter with buffer before use.▲The recommended incubation temperature is 2–8 °C. Workingon ice may require increased incubation times. Higher temperaturesand/or longer incubation times may lead to non-specific celllabeling.1. Determine确定cell number.2. Centrifuge cell suspension细胞悬液at 300×g for 10 minutes. Aspirate supernatant completely.吸取上清3. Resuspend cell pellet in 300 μL of buffer per 10⁸total cells.4. Add 100 μL of FcR Blocking Reagent per 10⁸total cells.5. Add 100 μL of CD133 MicroBeads per 10⁸total cells.6. Mix well and incubate for 30 minutes in the refrigerator(2−8 °C).7. (Optional) Add staining antibodies, e.g., 50 μL of CD133/2(293C3)-PE (# 130-090-853), and incubate for 5 minutes in thedark in the refrigerator (2−8 °C).8. Wash cells by adding 1−2 mL of buffer per 10⁸cells andcentrifuge at 300×g for 10 minutes. Aspirate supernatantcompletely.9. Resuspend up to 10⁸cells in 500 μL of buffer.▲Note: For higher cell numbers, scale up buffer volume accordingly.▲Note: For depletion with LD Columns, resuspend up to 1.25亊10⁸cells in 500 μL of buffer.10. Proceed to magnetic separation (2.3).2.3 Magnetic separation▲Choose an appropriate MACS Column and MACS Separatoraccording to the number of total cells and the number of CD133+cells. For details see table in section 1.4.▲Always wait until the column reservoir is empty before proceedingto the next step.Magnetic separation with MS or LS Columns▲To achieve highest purities, perform two consecutive columnruns.1. Place column in the magnetic field of a suitable MACS Separator.For details see the respective MACS Column data sheet.2. Prepare column by rinsing with the appropriate amount ofbuffer:MS: 500 μL LS: 3 mL3. Apply cell suspension onto the column. Collect flow-throughcontaining unlabeled cells.4. Wash column with the appropriate amount of buffer. Collectunlabeled cells that pass through and combine with the effluentfrom step 3.MS: 3×500 μL LS: 3×3 mL▲Note: Perform washing steps by adding buffer aliquots only when the column reservoir is empty.5. Remove column from the separator and place it on a suitablecollection tube.▲Note: To perform a second column run, you may elute the cells directly from the first onto the second, equilibrated column instead of a collection tube.6. Pipette the appropriate amount of buffer onto the column.Immediately flush out the magnetically labeled cells by firmlypushing the plunger into the column.MS: 1 mL LS: 5 mL7. To increase purity of CD133+ cells, enrich the eluted fractionover a second MS or LS Column. Repeat the magneticseparation procedure as described in steps 1 to 6 by using anew column.Magnetic separation with XS ColumnsFor instructions on the column assembly and the separation refer tothe XS Column data sheet.Depletion with LD Columns1. Place LD Column in the magnetic field of a suitable MACSSeparator. For details see LD Column data sheet.2. Prepare column by rinsing with 2 mL of buffer.3. Apply cell suspension onto the column.4. Collect unlabeled cells that pass through and washcolumn with 2×1 mL of buffer. Collect total effluent;this is the unlabeled cell fraction. Perform washingsteps by adding buffer two times. Only add new buffer whenthe column reservoir is empty.Depletion with CS Columns1. Assemble CS Column and place it in the magnetic field of asuitable MACS Separator. For details see CS Column datasheet.2. Prepare column by filling and rinsing with 60 mL of buffer.Attach a 22G flow resistor to the 3-way stopcock of theassembled column. For details see CS Column data sheet.3. Apply cell suspension onto the column.4. Collect unlabeled cells that pass through and wash columnwith 30 mL buffer from the top. Collect total effluent; this isthe unlabeled cell fraction.Depletion with D ColumnsFor instructions on column assembly and separation refer to theD Column data sheet.Magnetic separation with the autoMACS® Pro Separator or theautoMACS® Separator▲Refer to the respective user manual for instructions on how to use the autoMACS Pro Separator or the autoMACS Separator.▲Buffers used for operating the autoMACS Pro Separator or the autoMACS Separator should have a temperature of ≥10 °C.▲Program choice depends on the isolation strategy, the strengthof magnetic labeling, and the frequency of magnetically labeled cells. For details refer to the section describing the cell separation programs in the respective user manual.Magnetic separation with the autoMACS® Pro Separator1. Prepare and prime the instrument.2. Apply tube containing the sample and provide tubes for collecting the labeled and unlabeled cell fractions. Placesample tube in row A of the tube rack and the fractioncollection tubes in rows B and C.3. For a standard separation choose one of the following programs:Positive selection from peripheral blood, bone marrow, or leukapheresis: “Posseld”Collect positive fraction in row C of the tube rack.Positive selection from cord blood: “Posseld2”Collect positive fraction in row C of the tube rack.Depletion: “Depletes”Collect negative fraction in row B of the tube rack.Magnetic separation with the autoMACS® Separator1. Prepare and prime the instrument.2. Apply tube containing the sample and provide tubes for collecting the labeled and unlabeled cell fractions. Placesample tube at the uptake port and the fraction collectiontubes at port neg1 and port pos 2.3. For a standard separation choose one of the following programs:Positive selection from peripheral blood, bone marrow, or leukapheresis: “Posseld”Collect positive fraction from outlet port pos 2.Positive selection from cord blood: “Posseld2”Collect positive fraction from outlet port pos 2.Depletion: “Depletes”Collect negative fraction from outlet port neg1.3. Example of a separation using the CD133MicroBead KitCD133+ hematopoietic stem and progenitor cells were isolated from non-mobilized human PBMCs using the CD133 MicroBead Kit, MS Columns, and a MiniMACS™Separator. Cells were fluorescently stained with CD34-FITC (# 130-081-001) and CD133/2 (293C3)-PE (# 130-090-853) and analyzed by flow cytometry. Cell debris and dead cells werde excluded from the analysis based on scatter signals and propidium iodide fluorescence.All protocols and data sheets are available at .WarningsReagents contain sodium azide. Under acidic conditions sodium azide yields hydrazoic acid, which is extremely toxic. Azide compounds should be diluted with running water before discarding. These precautions are recommended to avoid deposits in plumbing where explosive conditions may develop.WarrantyThe products sold hereunder are warranted only to be free from defects in workmanship and material at the time of delivery to the customer. Miltenyi Biotec GmbHmakes no warranty or representation, either expressed or implied, with respect tothe fitness of a product for a particular purpose. There are no warranties, expressedor implied, which extend beyond the technical specifications of the products.Miltenyi Biotec GmbH’s liability is limited to either replacement of the products or refund of the purchase price. Miltenyi Biotec GmbH is not liable for any property damage, personal injury or economic loss caused by the product.autoMACS and MACS are registered trademarks and MidiMACS, MiniMACS, OctoMACS, QuadroMACS, SuperMACS, and V arioMACS are trademarks of Miltenyi Biotec GmbH.Ficoll-Paque is a trademark of GE Healthcare companies.Copyright . 2009 Miltenyi Biotec GmbH. All rights reserved.。
BLM15BB750SN1磁珠规格书
Impedance (Ω)
at 100MHz
at 1GHz
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
240±25%
-
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
220±25%
-
600±25%
-
1000±25%
-
600±25%
140 (Typ.)
1000±25%
300 (Typ.)
4516 1806
1005
1608
0402
0603
GHz Range Noise GHz Range Noise Suppression Type Suppression Type BLM15H/E BLM18H/E/G
Size (EIA Code) 0201
Type For Standard
For Standard
For High Speed Signal
GHz Range
For Digital Interface
For Standard (Low DC
Resistance Type)
0805
For Standard
Part Number
BLM18BB151SN1 BLM18BD151SN1 BLM18BB221SN1 BLM18BD221SN1 BLM18BB331SN1 BLM18BD331SN1 BLM18BD421SN1 BLM18BB471SN1 BLM18BD471SN1 BLM18BD601SN1 BLM18BD102SN1 BLM18BD152SN1 BLM18BD182SN1 BLM18BD222SN1 BLM18BD252SN1 BLM18RK121SN1 BLM18RK221SN1 BLM18RK471SN1 BLM18RK601SN1 BLM18RK102SN1 BLM18PG300SN1 BLM18PG330SN1 BLM18PG600SN1 BLM18PG121SN1 BLM18PG181SN1 BLM18HG471SN1 BLM18HG601SN1 BLM18HG102SN1 BLM18HB121SN1 BLM18HB221SN1 BLM18HB331SN1 BLM18HD471SN1 BLM18HD601SN1 BLM18HD102SN1 BLM18HK331SN1 BLM18HK471SN1 BLM18HK601SN1 BLM18HK102SN1 BLM18EG101TN1 BLM18EG121SN1 BLM18EG221TN1 BLM18EG331TN1 BLM18EG391TN1 BLM18EG471SN1 BLM18EG601SN1 BLM18GG471SN1 BLM21AG121SN1 BLM21AG151SN1 BLM21AG221SN1 BLM21AG331SN1 BLM21AG471SN1 BLM21AG601SN1 BLM21AG102SN1
BLM18PG600SN1磁珠规格书
1400±40%
1000±25%
2000±40%
1800±25%
2700±40%
120±25%
145 (Typ.)
220±25%
270 (Typ.)
120±25%
-
150±25%
-
220±25%
-
330±25%
-
470±25%
-
600±25%
-
1000±25%
-
5±25%
-
10±25%
-
22±25%
Impedance (Ω)
at 100MHz
at 1GHz
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
240±25%
-
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
220±25%
-
600±25%
-
1000±25%
-
600±25%
140 (Typ.)
1000±25%
300 (Typ.)
yElectrode Expressed by a letter.
Ex.)
Code
S/T
A
W
Electrode Sn Plating Au Plating
Ag/Pd
uCategory Code Z H
For Automotive
Category Infotainment
Powertrain, Safety
200
100 500 700
500
300 500 200 300 200
200
贴片磁珠规格
贴片磁珠规格 IMB standardization office【IMB 5AB- IMBK 08- IMB 2C】贴片磁珠规格表Features (特征)● These small size chips generating high impedance;小尺寸高阻抗。
● High reliability due to an entirely monolithic structure;高可靠性，片式结构。
● Low DC resistance structure of electrode prevents wasteful electric power consumption 低直流电阻的结构，防止浪费的电力消耗Applications(用途)Computers and peripheral equipment,VCRS,Television,Pagers,Cellular phones,Digital communicationequipment,Various electronics equipment,etc.电脑及周边设备，录像机，电视机，寻呼机，移动电话，数字通信设备，各种电子设备，等等Product Identification：产品识别1. Product Type 产品类型2. CORE Size 产品尺寸3. Impedance 阻抗值：110 for 11ΩShape and Size：（Dimensions are in mm）图示和尺寸：（单位mm）Test Equipment：测试设备L: HP4285A precision LCR meterDCR: CHEN HWA 502BC OHM METER Electrical Characteristics for SMDB1005/1608 Series SMDB1005/1608系列电气特性参数SMDB2012/3216系列电气特性参数SMDB3225/4516/4532系列电气特性参数附：磁珠和电感的区别磁珠的功能主要是消除存在于传输线结构(电路)中的RF噪声，RF能量是叠加在直流传输电平上的交流正弦波成分，直流成分是需要的有用信号，而射频RF能量却是无用的电磁干扰沿着线路传输和辐射(EMI)。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
EG
For GHz Band General Use (Low DC Resistance Type)
HB
HD
For GHz Band High-speed Signal Lines
HE
GA
For High-GHz Band High-speed Signal Lines
GG
For High-GHz Band General Use
Chip Ferrite Bead for Automotive Part Numbering
(Part Number)
BL M 18 AG 102 S Z 1 D q w e r t y u io
qProduct ID Product ID BL
Chip Ferrite Beads
wType Code E M
iNumber of Circuits Code 1
Number of Circuits 1 Circuit
rCharacteristics/Applications
Code *1
Characteristics/Applications
AG For General Use
AX
BA
BB
BC
For High-speed Signal Lines
Chip Ferrite Bead for Automotive Part Numbering
oPackaging
Code
Packaging
K
Embossed Taping (ø330mm Reel)
L
Embossed Taping (ø180mm Reel)
B
Bulk
5±25%
-
10±25%
-
22±25%
-
47±25%
-
75±25%
-
120±25%
-
220±25%
-
75±25%
-
120±25%
-
220±25%
-
470±25%
-
600±25%
-
1000±25%
-
1800±25%
-
10 (Typ.)
-
600±25%
1000±40%
1000±25%
1400±40%
600±25%
4516 1806
1005
1608
0402
0603
GHz Range Noise GHz Range Noise Suppression Type Suppression Type BLM15H/E BLM18H/E/G
Size (EIA Code) 0201
Type For Standard
For Standard
60 (0.5A) 60 (3A)
50 (3A)
60 (6A)
33 (3A) 30 (1A)
30 (3A)
33 (6A)
22 22
10 10 10
10 10
555
mm 0603 1005 1608 2012 1005 1608 2012 1608 2012
EIA Code 0201 0402 0603 0805 0402 0603 0805 0603 0805
J
Paper Taping (ø330mm Reel)
D
Paper Taping (ø180mm Reel)
*1 BLM21BD222Sp1/BLM21BD272Sp1 only. *2 Except for BLM21BD222Sp1/BLM21BD272Sp1
Series BLE, BLM21 *1/31/41 All Series BLM03/15/18 /21 *2
-
47±25%
-
60±25%
-
75±25%
-
-
120±25%
-
-
140±25%
-
BLM Series
Rated Current (mA) 500 200 200 100 1000 500
300 200 300 200 500
300
200
300
200
100 1000 300 250 300 250 200 1500* 700*
For High Speed Signal
GHz Range
For Digital Interface
For Standard (Low DC
Resistance Type)
0805
For Standard
Part Number
BLM18BB151SN1 BLM18BD151SN1 BLM18BB221SN1 BLM18BD221SN1 BLM18BB331SN1 BLM18BD331SN1 BLM18BD421SN1 BLM18BB471SN1 BLM18BD471SN1 BLM18BD601SN1 BLM18BD102SN1 BLM18BD152SN1 BLM18BD182SN1 BLM18BD222SN1 BLM18BD252SN1 BLM18RK121SN1 BLM18RK221SN1 BLM18RK471SN1 BLM18RK601SN1 BLM18RK102SN1 BLM18PG300SN1 BLM18PG330SN1 BLM18PG600SN1 BLM18PG121SN1 BLM18PG181SN1 BLM18HG471SN1 BLM18HG601SN1 BLM18HG102SN1 BLM18HB121SN1 BLM18HB221SN1 BLM18HB331SN1 BLM18HD471SN1 BLM18HD601SN1 BLM18HD102SN1 BLM18HK331SN1 BLM18HK471SN1 BLM18HK601SN1 BLM18HK102SN1 BLM18EG101TN1 BLM18EG121SN1 BLM18EG221TN1 BLM18EG331TN1 BLM18EG391TN1 BLM18EG471SN1 BLM18EG601SN1 BLM18GG471SN1 BLM21AG121SN1 BLM21AG151SN1 BLM21AG221SN1 BLM21AG331SN1 BLM21AG471SN1 BLM21AG601SN1 BLM21AG102SN1
0402
For High Speed Signal (Sharp impedance characteristics)
For Large Current For Standard
GHz Range
For High Speed Signal
For Standard (Low DC
Resistance Type)
Impedance (Ω)
at 100MHz
at 1GHz
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
240±25%
-
10 (Typ.)
-
70 (Typ.)
-
120±25%
-
220±25%
-
600±25%
-
1000±25%
-
600±25%
140 (Typ.)
1000±25%
300 (Typ.)
Series BLM03/15/18/21 BLM03/15 BLM15/18 BLM03/15/18/21 BLM03/15 BLM03/15/18/21 BLM15 BLM15 BLM03/15/18/21/31/41 BLE32 BLM03/15
BLM18
BLM03/15/18 BLM03 BLM15/18 BLM03/15/18 BLM03/15/18 BLM18 BLM15 BLM15/18
200
100 500 700
500
300 500 200 300 200
200
Size (EIA Code)
Type
For High Speed Signal (Sharp impedance characteristics)
For Digital Interface
0603
For Large Current For Standard
470 470 470 470 470 470 470 420 420
400
330 330
330 330
240
220 220 220 220 220 220 220 220
200
150 150
150 150
140
120 120 120 120 120 120 120 120 120
100
70 70
75 75 75 60 60
47 47
1800
1000 (1.5A) 1000
600 (1.5A)
600
470 (2A)
1000
600 470
390 (2A)
390
330 (1.5A)
330
220 (2A)
220
220
180 (1.5A)
180 (3A)
120 (2A)
120 (3A)
120
120
100Байду номын сангаас
80 (1A)
75 (3A)
Type DC Bias Characteristics Improved Type
Ferrite Bead Single Type
eDimensions (LgW)
Code
Dimensions (LgW)
03
0.6g0.3mm
15
1.0g0.5mm
18