Delrin POM 127UVE NC010 物性表
POM塑胶原料
Delrin 511DP BK402 POM 良好的尺寸稳定性 工程机械配件，紧固件，齿轮
Delrin 511DP NC010 POM 良好的尺寸稳定性 工程机械配件，紧固件，齿轮
Delrin FG100AL NC010 POM 抗蠕变性能好，耐冲击性好 输送机，工程机械配件;齿轮
Delrin FG100P NC010 POM 抗疲劳，抗蠕变性能好;良好的点心 输送机，工程机械配件，紧固件，齿轮
Delrin FG100TL NC010 POM 良好的耐蠕变性，尺寸稳定性好 输送机;工程机械配件;齿轮;管
Delrin 100PE NC010 POM 抗疲劳，抗蠕变性能好 汽车内饰件，工程机械配件;快速成型
Delrin 100ST BK602 POM 高耐冲击性;超高分子量 涂料应用;工程机械配件，紧固件
Delrin 100ST NC010 POM 高耐冲击性;超高分子量 涂料应用;工程机械配件，紧固件
Delrin 527UV NC010 POM 抗疲劳，抗蠕变性能好 汽车内饰件
Delrin 570 NC000 POM 抗蠕变性能好，刚度好 汽运;工程机械配件
Delrin 577 BK000 POM 良好的刚性，良好的抗紫外线性能;中等粘度 工程机械配件
Delrin 900P BK602 POM 抗疲劳，抗蠕变性能好 工程机械配件;齿轮;通用;薄壁零件
Delrin 300CP NC010 POM 良好的尺寸稳定性 工程机械配件，紧固件，齿轮
Delrin 300PE NC010 POM 低VOC 工程机械配件，紧固件，齿轮
常用注塑原料物性表
PA66 A63S10 9005
258
260-290
背压5-10
60-80
屹立
80/4-8h
13
PA66 AI0[FXT]
258
250-285 喷嘴255-270 中270-285 入料 250-260
射压50～100MPa保压30～70 Mpa背压5～15Mpa
60～90
1.1-1.14
聚隆
100-120/3-4
255
280-290
背压3--5
75-85
1.11.36
旭光
31
PA66 GF30 TECHNYL A218V30BK34NG/Bk
265-275／280-290
265-290
70-100
1.35
Rhodia/罗地亚
80
32
PA66 GF30 A3WG6 Black
280-300
280-300
80 - 90
14
PA66 AI0 HZD RMP0436
250-285
聚隆
15
PA66 AI0(HDC灰）
255
250-285
1.28
聚隆
16
PA66 AI0 S04 BK
聚隆
17
PA66 AH0 BK
250-280
250-280
50～80
聚隆
90～100 2-4h
18
PA66 A3W本色 +HZQ色母 或 Nature +Pigment121586-12
280-310
60-80
A.Schulamid
4-6H/80
37
PA66 Zytel 101L+2%通用 +BK pigment
POM 美国杜邦 100PE NC010
DuPont™ Delrin ®100PE NC010ACETAL RESIN产品Delrin®聚甲醛树脂的共性包括优异的机械性能和物理性能比如高机械强度和刚性，优异的耐疲劳性能和抗冲击性，同时具有突出的耐潮湿、汽油、润滑剂、溶剂和多种其他中性化学品。
Delrin®聚甲醛树脂还具有卓越的尺寸稳定性和良好的电绝缘性能，具有天然弹性、自润滑，可制成多种颜色和特殊规格。
Delrin®聚甲醛树脂通常应用于具有严苛要求的汽车、家用电器、运动、工业工程、电子和消费品工业。
Delrin® 100PE NC010是一种高粘度均聚甲醛具有超低挥发性总说明数值单位测试标准树脂鉴别POM -ISO 1043产品标识码>POM<-ISO 11469流变性能数值单位测试标准熔体体积流动速度, MVR 2.1cm³/10min ISO 1133温度190°C ISO 1133负荷2.16kgISO 1133熔体质量流动速率 2.5g/10min ISO 1133模塑收缩率, 平行 2.2%ISO 294-4, 2577模塑收缩率, 垂直 1.8%ISO 294-4, 2577机械性能数值单位测试标准拉伸模量3100MPa ISO 527-1/-2屈服应力72MPa ISO 527-1/-2屈服伸长率26%ISO 527-1/-2名义断裂伸长率45%ISO 527-1/-2弯曲模量2900MPa ISO 178弯曲应力（3.5%应变）79MPa ISO 178无缺口简支梁冲击强度ISO 179/1eU +23°C N kJ/m²-30°C400kJ/m²简支梁缺口冲击强度ISO 179/1eA +23°C 15kJ/m²-30°C 13kJ/m²洛氏硬度91-ISO 2039-2洛氏硬度, Rockwell 121-ISO 2039-2热性能数值单位测试标准熔融温度, 10°C/min 178°C ISO 11357-1/-3热变形温度ISO 75-1/-21.80 MPa 99°C 0.45 MPa 157°C 维卡软化温度175°C ISO 306线膨胀系数, 平行110E-6/K ISO 11359-1/-2线膨胀系数ISO 11359-1/-2垂直110E-6/K 线性热膨胀系数100E-6/K 线性热膨胀系数100E-6/K 燃烧性能数值单位测试标准FMVSS ClassB -ISO 3795 (FMVSS 302)燃烧速率, 厚度：1毫米<100mm/min ISO 3795 (FMVSS 302)电性能数值单位测试标准相对介电常数.IEC 60250100Hz 4-1MHz3.9-Page: 1 of 5修订： 2016-01-08To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.North AmericaAsia PacificEurope/Middle East/Africa 如需购买请联系138********邱-RQQ1539078605介质损耗因子IEC 60250100Hz 5E-41MHz 50E-4体积电阻率>1E13Ohm*m IEC 60093表面电阻率3E14Ohm IEC 60093介电强度44kV/mm IEC 60243-1相对漏电起痕指数600-IEC 60112吸湿性, 2mm 0.19%类似ISO 62吸水性, 2mm 0.92%类似ISO 62密度1420kg/m³ISO 1183熔体密度1190kg/m³-挥发性<2mg/kg VDA 275有机化合物的排放10µgC/g VDA 277气味测试 3.5class VDA 270建议干燥是--干燥温度80°C -干燥时间，除湿干燥机 2 - 4h -加工前水分含量≤0.2%-最优熔体温度205°C -注塑 熔体温度200°C -注塑 熔体温度210°C -最优模具温度90°C -模具温度80°C -模具温度100°C -保压范围90 - 110MPa -保压时间8s/mm -回火时间, 可选30min/mm -回火温度160°C -干燥温度75 - 85°C -干燥时间，除湿干燥机 2 - 4h -加工前水分含量≤0.2%-最优熔体温度200°C -熔体温度范围195 - 205°C-注塑异型材挤出成型片材挤出成型其它挤出成型加工方法粒料供货形式脱模助剂添加剂北美欧洲亚太中南美洲中东/非洲Global地区供应Drying is recommended, but not necessary for newly opened packaging stored in a dry location.Follow the drying guidelines above in the following cases:· If moisture is above the Processing Moisture Content recommendation,· When a resin container is damaged,· When the material is not properly stored in a dry place at room temperature, or · When packaging stays open for a significant time.Page: 2 of 5修订： 2016-01-08To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.North AmericaAsia PacificEurope/Middle East/Africa 如需购买请联系138********邱-RQQ1539078605Page: 3 of 5修订： 2016-01-08To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.North America Asia Pacific Europe/Middle East/Africa剪切速度 in 1/s粘度 i n P a s1E21E31E41E21E31E4200°C 215°C 230°C剪切速度 in 1/s剪切应力 i n P a1E21E31E41E51E6200°C 215°C 230°CPage: 4 of 5修订： 2016-01-08To find out more, visit DuPont Performance Polymers or contact nearest DuPont location.North AmericaAsia PacificEurope/Middle East/Africa温度 in °CE 模量 i n M P a-500501001501E21E31E4联系杜邦以获得材料安全物性数据表、一般指南和/或其他关于排风、处理、清洗、干燥等的相关信息。
杜邦物性表-POM DELRIN500TNC010
DuPont™ Delrin®acetal resinDelrin® 500T NC010Delrin® 500T NC010 is a toughened, medium viscosity acetal homopolymer resin with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.Property Test Method Units ValueIdentificationResin Identification ISO 1043POM-IPart Marking Code ISO 11469>POM-I< MechanicalYield Stress ISO 527MPa (kpsi)54 (7.8)Yield Strain ISO 527%20Strain at Break ISO 527%50mm/min>50Nominal Strain at Break ISO 527%35Tensile Modulus ISO 527MPa (kpsi)2300 (334)Tensile Creep Modulus ISO 899MPa (kpsi)1h2300 (334)1000h1150 (167)Flexural Modulus ISO 178MPa (kpsi)2100 (305)Flexural Stress ISO 178MPa (kpsi)@ 3.5% Strain60 (8.7)Notched Charpy Impact Strength ISO 179/1eA kJ/m2-30°C (-22°F)923°C (73°F)14Unnotched Charpy Impact Strength ISO 179/1eU kJ/m2-30°C (-22°F)33023°C (73°F)NBContact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.Test temperatures are 23°C unless otherwise stated.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2005.060130/060130 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated;these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-useconditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as alicense to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body.For other medical applications see "DuPont Medical Caution Statement", H-50102.Delrin® 500T NC010Property Test Method Units ValueThermalDeflection Temperature ISO 75f °C (°F)0.45MPa146 (295)1.80MPa78 (172)Melting Temperature ISO 11357-1/-3 °C (°F)10°C/min178 (352)CLTE, Normal ISO 11359-1/-2E-4/C (E-4/F)-40 - 23°C (-40 - 73°F) 1.1 (0.61)23 - 55°C (73 - 130°F) 1.2 (0.66)55 - 100°C (130 - 212°F) 1.6 (0.89)CLTE, Parallel ISO 11359-1/-2E-4/C (E-4/F)-40 - 23°C (-40 - 73°F) 1.1 (0.61)23 - 55°C (73 - 130°F) 1.3 (0.72)55 - 100°C (130 - 212°F) 1.31 (0.73)Vicat Softening Temperature ISO 306 °C (°F)50N139 (282) RheologicalMelt Mass-Flow Rate ISO 1133g/10 min190°C, 2.16kg12ElectricalSurface Resistivity IEC 60093ohm1E15Relative Permittivity IEC 602501E2 Hz 3.61E6 Hz 3.6Volume Resistivity IEC 60093ohm m>1E13Dissipation Factor IEC 60250E-41E6 Hz160CTI IEC 60112V600Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.Test temperatures are 23°C unless otherwise stated.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2005.060130/060130 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated;these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-useconditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as alicense to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body.For other medical applications see "DuPont Medical Caution Statement", H-50102.Delrin® 500T NC010Property Test Method Units ValueFlammabilityFlammability Classification IEC 60695-11-100.75mm HBFlammability Classification UL940.75mm HBOxygen Index ISO 4589-1/-2%23High Amperage Arc Ignition Resistance UL 746A arcs0.75mm200Hot Wire Ignition UL 746A s0.75mm81.5mm113.0mm15 Temperature IndexRTI, Electrical UL 746B°C0.75mm105RTI, Impact UL 746B°C0.75mm85RTI, Strength UL 746B°C0.75mm85OtherDensity ISO 1183kg/m3 (g/cm3)1380 (1.38)Hardness, Rockwell ISO 2039/2Scale M79Scale R117Water Absorption ISO 62, Similar to%Equilibrium 50%RH0.21Saturation, immersed0.82Molding Shrinkage ISO 294-4%Normal, 2.0mm 1.6Parallel, 2.0mm 1.7Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.Test temperatures are 23°C unless otherwise stated.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2005.060130/060130 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated;these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-useconditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as alicense to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body.For other medical applications see "DuPont Medical Caution Statement", H-50102.Delrin® 500T NC010Property Test Method Units ValueProcessingMelt Temperature Range °C (°F)200-210 (390-410)Melt Temperature Optimum °C (°F)205 (400)Mold Temperature Range °C (°F)40-60 (100-140)Mold Temperature Optimum °C (°F)50 (122)Drying Time, Dehumidified Dryer h2-4Drying Temperature °C (°F)80 (175)Processing Moisture Content%<0.05Hold Pressure Range MPa (kpsi)60-80 (9-12)Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.Test temperatures are 23°C unless otherwise stated.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2005.060130/060130 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated;these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-useconditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as alicense to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body.For other medical applications see "DuPont Medical Caution Statement", H-50102.。
杜邦物性表-POM DELRIN100TNC010
DuPont ™ Delrin®acetal resinPRELIMINARY DATADelrin ®100T NC010IdentificationResin Identification ISO 1043POM-I Part Marking Code ISO 11469>POM-I<Mechanical Yield Stress ISO 527MPa (kpsi)52 (7.5) Yield Strain ISO 527%25 Strain at Break ISO 527%50mm/min>50Nominal Strain at Break ISO 527%>50 Tensile Modulus ISO 527MPa (kpsi)1900 (276) Flexural ModulusISO 178MPa (kpsi)1700 (245)Notched Charpy Impact Strength ISO 179/1eAkJ/m2-30°C (-22°F)13 23°C (73°F)25Unnotched Charpy Impact Strength ISO 179/1eUkJ/m 2-30°C (-22°F)NB 23°C (73°F)NBContact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwise stated.The above data are preliminary and are subject to change as additional data are developed on subsequent lots.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2005.060126/060126The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as alicense to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.Delrin ® 100T NC010 is a toughened, high viscosity acetal homopolymer grade with high impact resistance.PropertyTest Method Units ValueDelrin ®100T NC010ThermalDeflection TemperatureISO 75f °C (°F)0.45MPa 130 (265) 1.80MPa72 (160)Melting Temperature ISO 11357-1/-3 °C (°F)10°C/min 178 (352)CLTE, Parallel ISO 11359-1/-2E-4/C (E-4/F)23 - 55°C (73 - 130°F) 1.2 (0.67)Rheological Melt Mass-Flow Rate ISO 1133g/10 min190°C, 2.16kg 2.0ElectricalRelative Permittivity IEC 602501E6 Hz 3.1Dissipation Factor IEC 60250E-41E6 Hz 90CTI IEC 60112V 600Other DensityISO 1183kg/m 3 (g/cm 3)1370 (1.37)Hardness, Rockwell ISO 2039/2Scale M 59 Scale R 113Water Absorption ISO 62, Similar to%Equilibrium 50%RH 0.3 Saturation, immersed 0.9Molding Shrinkage ISO 294-4%Normal, 2.0mm 1.9 Parallel, 2.0mm2.1Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwise stated.The above data are preliminary and are subject to change as additional data are developed on subsequent lots.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2005.060126/060126The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as alicense to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.PropertyTest Method Units ValueDelrin ®100T NC010ProcessingMelt Temperature Range °C (°F)200-210 (390-410)Melt Temperature Optimum °C (°F)205 (400) Mold Temperature Range °C (°F)40-60 (100-140)Mold Temperature Optimum °C (°F)50 (122) Drying Time, Dehumidified Dryer h 2-4 Drying Temperature °C (°F)80 (175) Processing Moisture Content %<0.05 Hold Pressure RangeMPa (kpsi)60-80 (9-12)Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwise stated.The above data are preliminary and are subject to change as additional data are developed on subsequent lots.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2005.060126/060126The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publication is to be considered as alicense to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. Caution: Do not use this product in medical applications involving permanent implantation in the human body. For other medical applications see "DuPont Medical Caution Statement", H-50102.PropertyTest Method Units Value。
常用注塑原料物性表
Rhodia/罗地亚
80
32
PA66 GF30 A3WG6 Black
280-300
280-300
80 - 90
Basf
33
PA66 GF30-A7Y-S0007 Yellow
275-310
275-310
60-80
1.35
广州金发
90~110/4~6h
35
PA66 GF30 KA771BK
270-300
80/2-4h
38
PA66 ZytelMT409AHS
270-300
280
Dupont
39
40
PA6 BI0 BK
220-260
220-260
1.08
南京聚隆
41
PA6 B100BK
210-220
240-250
背压3--5熔点217
1.14
苏州旭光
110-120/4-6H
42
PA6 B100 NA
210-220
EXXONMOBIL
83
PP+EPDM Santoprene 101-80
EXXONMOBIL
84
SFP0055：PP+EPDM 201-73 NatureSFP0056：PP+EPDM 201-73 Nature+2%蓝色母
199-232
177-232
后177,中182,喷嘴188-221
EXXOMOBILE
背压3--5
65-75
1.23
苏州旭光
47
PA6 GF30 BG6C BK +15PTFE
220
1.37
POM 100P物性表
• 电线电缆应用
• 紧固件
• 铸造薄膜
RoHS 合规性
• 联系制造商
外观
• 自然色
加工方法
• 挤出 • 片材挤出成型
• 型材挤出成型 • 注射成型
• 铸造薄膜
多点数据
• Isothermal Stress vs. Strain (ISO 11403-1)
• Shear Modulus vs. Temperature • Viscosity vs. Shear Rate (ISO
.
Delrin® 100P NC010
ACETAL RESIN DuPont Performance Polymers
机械性能 拉伸模量 -40°C 2 23°C 2 100°C 2 23°C 抗张强度 屈服, -40°C 2 屈服, 23°C 2 屈服, 100°C 2 屈服, 23°C -40°C 2 23°C 2 100°C 2 伸长率 屈服, -40°C 2 屈服, 23°C 2 屈服, 100°C 2 屈服, 23°C 断裂, -40°C 2 断裂, 23°C 2 断裂, 100°C 2 断裂, 23°C 断张率 (23°C) 拉伸蠕变模量 1 hr 1000 hr 弯曲模量 -40°C 23°C 100°C 23°C 弯曲强度 5.0% 应变, 23°C 3.5% 应变, 23°C 剪切强度 (23°C)
2012年2月11日 测试方法 UL 746
UL 746
UL 746
UL 746
4/4
.
Copyright © 2012 - IDES - The Plastics Web ® | 15899928820
额定值 单位制 80.0 °C
杜邦材料命名规则
Product Grade 各种产品等级Crastin®PBT· SK= Glass reinforced resin· S=Unreinforced resins· LW= Low warp resins· T=Toughened resins· ST= Super Tough· HR= Improved Hydrolysis resistanceSuffixes· HF=High flow· FR=UL-94 V-0 resinCrastin.PBTSK = 玻纤增强的树脂S=未增强树脂LW = 低翘曲树脂T=增韧树脂ST = 超韧级别HR= 抗水解改良词尾HF=高流动FR=UL-94 V0 树脂Delrin® POMMost Delrin® products are coded with 3 or 4 digits with the first digit (if 3 digits total) or the first 2 digits (if 4 digits total) representing approximately ½ of the Melt Flow Rate (using ISO 1133, with a 2.16 kg load, g/10min). Thus, the 100-flow series is the highest viscosity series (or lowest MFR), followed by the 300, 500, 900, etc.Most grades are coded as per the following example:Delrin® 500P NC010Delrin® - Product Line and Registered Trademark500 – Product CodeP - SuffixNC010 – color codeCodes – major gradesX00 series –often are the “classic” homopolymer general purpose grades X00P series – based on an improved thermal stabilizer system; these general purpose homopolymer grades have better stability in processing with a wide processing window.X11P series –same improved “P” stabilizer in general purpose homopolymer grades and modified to provide enhanced crystallization; faster cycle time, lower mold shrinkage, less warpage, reduced voids, and greater out-of-mold dimensional stability.X60 series – copolymer general purpose gradesX07 series – are UV-stabilized grades.X27UV series – are more thermally stable UV-stabilized grades.X50 series – extrusion gradeCodes – prefix designationDE – development or commercial code, random numberCodes – specific letter suffix designationAL – advanced lubricantsKM –Kevlar® modifiedST – super-toughP –improved “P” thermal stabilizer systemT – toughenedMT – medium toughUV – UV stabilizedAS – anti-static/stiffenedAT – anti-static/toughenedATB – anti-static/toughened, alternate gradeCM – X42CM for 2-component moldingAF –PTFE Teflon® fiber filledCL – chemical lubricantLM – laser markableTL – PTFE lubricantGR – glass reinforcedMF – mineral filledE – low emissionDP – dimensionally stable and high productivityColor Codes for Delrin®NC010 – natural for most gradesNC000 – natural for GR or MF gradesBK602, 402 – standard black codesBK601, 401 – black colors for UV gradesBK000 – a black color code used for certain filled gradesBKL001 – a laser markable color code (in this case for black)** Note – in some cases, there may be no color codeDelrin. POM多数Delrin. 牌号由3 个或4 个阿拉伯数字组成，以第一数字(如果牌号只有3 数字组成) 或前2 个数字(如果牌号由4 个数字组成) 近似地代表流动性的. (在ISO1133标准, 2 .16 KG装载, g/10min条件下测得) 。
pluronic系列产品指标
【技术指标】PLURONIC 聚醚系列一、产品组成聚氧丙烯聚氧乙烯嵌段型聚醚二、产品结构HO(CH2CH2O)m(CH3CHCH2O)n(CH2CH2O)mH三、产品性能及指标名称平均分子量比重25/25℃粘度25℃CPS流点℃浊点(1%水溶液)℃熔点℃表面张力dynes/cm溶解度0.10%0.01%0.001%乙醇95甲苯二甲苯全氯乙煤油乙二醇丙二醇水国产牌号对照组成：聚氧乙烯、聚氧丙烯嵌段聚合物英文名称：polyether L61、L62、L64结构式：HO(C2H4O)a-（C3H6O）b-(C2H4O)c-H类型：非离子型【性能与应用】1、作低泡沫洗涤剂或消泡剂。
L61、L64、F68用于配制低泡、高去污力合成洗涤剂；L61在造纸或发酵工业中用作消泡剂；F68 在人工心肺机血液循环时用作消泡剂，防止空气进入。
2、聚醚毒性很低，常用作药物赋形剂和乳化剂；在口腔、鼻喷雾剂、眼、耳滴剂和洗发剂中都经常使用。
3、聚醚是有效的润湿剂，可用于织物的染色、照相显影和电镀的酸性浴中，在糖厂使用F68，由于水的渗透性增加，可获得更多的糖分。
4、聚醚是有效的抗静电剂，L44可对合成纤维提供持久的静电防护作用。
5、聚醚在乳状液涂料中作分散剂。
F68在醋酸乙烯乳液聚合时作乳化剂。
L62、L64可作农药乳化剂，在金属切削和磨削中作冷却剂和润滑剂。
在橡胶硫化时作润滑剂。
6、聚醚可用作原油破乳剂，L64、F68能有效地防止输油管道中硬垢的形成,以及用于次级油的回收。
7、聚醚可用作造纸助剂，F68能有效地提高铜版纸的质量。
8、F38可用作乳化剂、润湿剂、消泡剂、破乳剂、分散剂、抗静电剂、除尘剂、粘度调节剂、控泡剂、匀染剂、胶凝剂等，用于生产农用化学品、化妆品、药品；还用于金属加工净洗、纸浆和造纸工业、纺织品加工（纺织、整理、染色、柔软整理）、水质处理；也用作漂清助剂。
泊洛沙姆泊洛沙姆（Poloxamer）为聚氧乙烯聚氧丙烯醚嵌段共聚物，商品名为普流尼克（Pluronic）。
杜邦物性表-POM DELRIN500PNC010
DuPont™ Delrin®acetal resinDelrin® 500P NC010Delrin® 500P NC010 is a medium viscosity acetal homopolymer resin for injection molding. Delrin® 500P has improved processing thermal stability.Property Test Method Units ValueIdentificationResin Identification ISO 1043POMPart Marking Code ISO 11469>POM< MechanicalYield Stress ISO 527MPa (kpsi)70 (10.1)Yield Strain ISO 527%17Strain at Break ISO 527%50mm/min40Nominal Strain at Break ISO 527%30Tensile Modulus ISO 527MPa (kpsi)3100 (450)Tensile Creep Modulus ISO 899MPa (kpsi)1h2800 (406)1000h1600 (232)Flexural Modulus ISO 178MPa (kpsi)2900 (420)Flexural Stress ISO 178MPa (kpsi)@ 3.5% Strain80 (11.6)Notched Charpy Impact Strength ISO 179/1eA kJ/m2-30°C (-22°F)823°C (73°F)9Unnotched Charpy Impact Strength ISO 179/1eU kJ/m2-30°C (-22°F)22023°C (73°F)300Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.Test temperatures are 23°C unless otherwise stated.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.061121/061121 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; thesedata may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you mayneed to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variationsin actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publicationis to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. CAUTION: This product is not permitted to be sold for use in medical applicationsinvolving any implantation in the human body or where contact with internal body fluids or tissues will equal or exceed 24 hours. For applications involvingcontact of less than 24 hours, see “DuPont Medical Caution Statement", H-50102 and contact your DuPont sales representative.Delrin® 500P NC010Property Test Method Units ValueThermalDeflection Temperature ISO 75-1/-2 °C (°F)0.45MPa158 (316)1.80MPa94 (201)Melting Temperature ISO 11357-1/-3 °C (°F)10°C/min178 (352)CLTE, Parallel ISO 11359-1/-2E-4/C (E-4/F)-40 - 23°C (-40 - 73°F) 1.0 (0.56)23 - 55°C (73 - 130°F) 1.1 (0.61)55 - 100°C (130 - 212°F) 1.5 (0.82)CLTE, Normal ISO 11359-1/-2E-4/C (E-4/F)-40 - 23°C (-40 - 73°F) 1.0 (0.56)23 - 55°C (73 - 130°F) 1.1 (0.61)55 - 100°C (130 - 212°F) 1.6 (0.9)Vicat Softening Temperature ISO 306 °C (°F)50N157 (315) RheologicalMelt Mass-Flow Rate ISO 1133g/10 min190°C, 2.16kg15ElectricalSurface Resistivity IEC 60093ohm1E15Volume Resistivity IEC 60093ohm m1E12Electric Strength IEC 60243-1kV/mm (V/mil)1.0mm33 (838)Relative Permittivity IEC 602501E2 Hz 3.91E6 Hz 3.9Dissipation Factor IEC 60250E-41E2 Hz2001E6 Hz60CTI IEC 60112V600Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.Test temperatures are 23°C unless otherwise stated.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.061121/061121 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; thesedata may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you mayneed to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variationsin actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publicationis to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. CAUTION: This product is not permitted to be sold for use in medical applicationsinvolving any implantation in the human body or where contact with internal body fluids or tissues will equal or exceed 24 hours. For applications involvingcontact of less than 24 hours, see “DuPont Medical Caution Statement", H-50102 and contact your DuPont sales representative.Delrin® 500P NC010Property Test Method Units ValueFlammabilityFlammability Classification IEC 60695-11-100.75mm HBFlammability Classification UL940.75mm HBOxygen Index ISO 4589-1/-2%22High Amperage Arc Ignition Resistance UL 746A arcs0.75mm200Hot Wire Ignition UL 746A s0.75mm81.5mm113.0mm15 Temperature IndexRTI, Electrical UL 746B°C0.75mm501.5mm1103.0mm110RTI, Impact UL 746B°C0.75mm501.5mm853.0mm90RTI, Strength UL 746B°C0.75mm501.5mm903.0mm95Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.Test temperatures are 23°C unless otherwise stated.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.061121/061121 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; thesedata may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you mayneed to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variationsin actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publicationis to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. CAUTION: This product is not permitted to be sold for use in medical applicationsinvolving any implantation in the human body or where contact with internal body fluids or tissues will equal or exceed 24 hours. For applications involvingcontact of less than 24 hours, see “DuPont Medical Caution Statement", H-50102 and contact your DuPont sales representative.Delrin® 500P NC010Property Test Method Units ValueOtherDensity ISO 1183kg/m3 (g/cm3)1420 (1.42)Hardness, Rockwell ISO 2039/2Scale M92Scale R120Water Absorption ISO 62, Similar to%Equilibrium 50%RH0.3Immersion 24h0.6Saturation, immersed 1.4Molding Shrinkage ISO 294-4%Normal, 2.0mm 1.9Parallel, 2.0mm 2.0ProcessingMelt Temperature Range °C (°F)210-220 (410-430)Melt Temperature Optimum °C (°F)215 (420)Mold Temperature Range °C (°F)80-100 (175-210)Mold Temperature Optimum °C (°F)90 (195)Drying Time, Dehumidified Dryer h2-4Drying Temperature °C (°F)80 (175)Processing Moisture Content%<0.2Hold Pressure Range MPa (kpsi)80-100 (12-15)Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm.Test temperatures are 23°C unless otherwise stated.The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.061121/061121 The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; thesedata may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you mayneed to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variationsin actual end-use conditions DuPont makes no warranties and assumes no liability in connection with any use of this information. Nothing in this publicationis to be considered as a license to operate under or a recommendation to infringe any patent rights. DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products. CAUTION: This product is not permitted to be sold for use in medical applicationsinvolving any implantation in the human body or where contact with internal body fluids or tissues will equal or exceed 24 hours. For applications involvingcontact of less than 24 hours, see “DuPont Medical Caution Statement", H-50102 and contact your DuPont sales representative.。
01 多异氰酸酯
制法：
TDI 工业化生产主要由甲苯经硝化生成二硝基甲苯，然后经催化 氢化生成二氨基甲苯，最后与光气反应制得。
三种 TDI 异构体产品的工业化光气法生产工艺流程如下：
3
硝化反应式如下： 二硝基甲苯(DNT)加氢还原成甲苯二胺(TDA)反应如下： 以 2,4-TDA 为例，光气化反应式为：
特性及用途： 甲苯二异氰酸酯是聚氨酯合成最重要的二异氰酸酯产品，广泛用 于软质聚氨酯泡沫塑料、涂料、弹性体、胶粘剂、密封胶及其它聚氨 酯产品。 TDI 是一种芳香族二异氰酸酯，反应性较脂肪族异氰酸酯高，TDI 本身及其聚氨酯产品长期暴露在自然光下会发生黄变。TDI 所含的 NCO 基团活性很大，易于水、醇、胺等起反应，在一定条件下可自 聚，这些反应可被碱性物质和许多种金属化合物催化，若操作不当可 引起急遽放热升温而产生质量或安全事故，故需小心对待。 TDI 工业品中以 TDI-80 用途最广，用量最多；TDI-100 结构规整， 可用于合成特殊的预聚体，主要用于聚氨酯弹性体；TDI-65 主要用 于聚酯型聚氨酯泡沫塑料等。 毒性及防护： 大鼠经口LD50＝4130 mg/kg，大鼠吸入LC50＝14 mL/m3/4h，吸入 LCLo: 600 mL/m3/6h；小鼠经口LD50＝1950 mg/kg，吸入LC50＝10 mL/m3/4h；兔经皮LD50>10 mL/kg。本品急性吸入毒性较高，经口毒 性较低。主要有明显刺激作用。对眼、呼吸道粘膜和皮肤有刺激作用， 并引起支气管哮喘。人的嗅觉阈为 0.35～0.92mg/m3。浓度达 3～ 3.6mg/m3时，对粘膜有刺激；27.8mg/m3时眼和呼吸道严重刺激。 车间空气卫生标准：中国MAC 0.2mg/m3；美国ACGIH TLV-TWA 0.036mg/m3、短期暴露极限浓度STEL 0.14mg/m3；英国对所有异氰酸 酯规定 8h的TWA按NCO计为 0.02 mg/m3，10min短期暴露极限浓度
Delrin 111P POM 物性表
10400 磅
@温度 73.4°F
40 %
@Temperature 73.4 °F
50 %
@Temperature 73.4 °F
73 %
@Temperature 73.4 °F
20％
@温度 73.4°F
21 %
@Temperature 73.4 °F
435 沪深
@温度 73.4°F
464 沪深
@温度 73.4°F
公
92
120
121 72.0 兆帕
@温度 23.0°C
0.000 兆帕
@应变 0.000％， 温度-40.0°C
60,799 MPA
英语 92
评论 ISO 二分之二千〇三十九
120
ISO 二分之二千〇三十九
121 10400 磅
@温度 73.4°F
0.000 磅
@应变 0.000％， 温度-40.0°F
92.0 兆帕
@应变 5.00％， 温度 23.0°C
2.90 GPA
@温度 23.0°C
2.97 GPa
@Temperature 23.0 °C
0.960 焦耳/平方厘米
@温度 23.0°C
@应变 2.8574％， 温度-40.0°F
12644 磅
@应变 5.7149％， 温度-40.0°F
13761 磅
@厚度 4.00 毫米
1.0 g/10 分钟
@负载 1.05 公斤， 190°C 温度
2.4 g/10 分钟
@ 2.16kg 载荷， 190°C 温度
1.9 g/10 分钟
@ 2.16kg 载荷， 190°C 温度
0.018 - 0.021 英寸/