台湾明纬防水电源规格书hlg-320h-spec
2014明纬开关电源手册
25
Environment HLG-150H, HLG-185H, HLG-240H
26
HLG-320H
27
MDR-10 / 20 / 40 / 60 / 100
28
DR-15, DR-30, DR-60, DR-100
29
DR-45, DR-75, DR-120,
30
DIN Series
DRP-240, DRP-480, DRP-480S DRH-120, DRT-240/480/960
2013
April
Introduction
Green Enterprises, Green Products
EXCELLENCE
TAIWAN
SUPERIOR BRANDS
E stablished in 1982, MEAN WELL is a leading standard switching power supply manufacturer in the world. During the past 30 years, our slogan “your reliable power partner” has been curved into the minds of all MEAN WELL employees and put into effect thoroughly between MEAN WELL and our valuable customers. Sure-footedly nurtured the core competency of P, Q, C, D, S, R (Product, Quality, Cost, Delivery, Service, and Reliable Relationship), we made every effort to accomplish the one stop shopping environment with the most complete standard power product lines.
台湾明纬开关电源选型手册
外形尺寸 安全
(mm)
注5
58 ╳ 45 ╳ 21 UTE
65 ╳ 45 ╳ 21 UTE
70 ╳ 48 ╳ 21 UTE
89 ╳ 51 ╳ 21 UTE
102 ╳ 66 ╳ 23 UTE
单组输出附加充电功能
型号
AD-55A AD-55B AD-155A AD-155B AD-155C
功 率 输入
DC 输出电流(A)
15 S
3
1.3
0.7
AK
A
图:A
S-25-
25 F
5
S-35-
35 S
7
2.1
1.7 1.1
3
2.4 1.5
ABHK AHK
UTE A B
S-40-
40 F
8
3.5
2.8 1.8
ABHK UTE B
S-50-
50 S
10
4.2
3.4 2.1
AHK
C
S-60-
60 F
12
5
4 2.5
ABHK UTE C
7
T-50B
50 S
5
T-50C
50 S
4
T-50D
50 S
3
T-60A
60 F
5
T-60B
60 F
5
T-60C
60 F
5
IT-60D 60 F
3
IT-60F 100 F
3
T-100C 100 S
10
T-100D 100 S
6
T-115 100 F 12 10
PT-45A 45 F
3
PT-45B 45 F
明纬LED电源安装手册说明书
●Type：LED Power Supply（Families：AP, CEN, CLG, ELG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LP, LPF, PLC, NPF, OWA, PCD, PLC, PLD, PLM, PLN, PLP, PWM, ULP）●IntroductionThe LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.Mean Well’s LED power supplies include metal case, plastic case, and PCB types.●Installation（1）Before commencing any installation or maintenance work, please disconnect the power supply from the utility.Ensure that it cannot be re-connected inadvertently!（2）Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be kept when the adjacent device is a heat source.（3）Mounting orientations other than standard orientation or operate under high ambient temperature may increase the internal component temperature and will require a de-rating in output current. Please refer to the specification sheet to receive the optimum mounting position and information about the de-rating curve.（4）Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit.Please refer to its specification.（5）For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighting fixture is tight so that water cannot intrude into the system.（6）For dimmable LED power supplies, make sure that your dimming controller is capable of driving these units. For ELN series, either “D” or “P” type, require40mA each unit; for those with “3 in 1” dimming function, e.g. HLG and LPF series, require 0.15mA each unit.（7（a）Connect the FG wire (green or green/yellow) of the LED power supply to PE (green or green/yellow), this step can be skipped when the unit is marked class II, ungrounded.（b）Connect the ACL wire (black or brown) of the LED power supply to Live (black or brown).（c）Connect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).（8）The maximum number of the LED PSUs that can be connected to a circuit breaker at 230V is shown as below.Note: These calculated values are based on MCB S200 series manufactured by ABB except for HVG/HVGC series, which are calculated by using MCB S260 series of the same manufacturer.（9）For other information about the products, please refer to for details.Warning / Caution !!（1）Risk of electrical shock and energy hazard. All failure should be examined by a qualified technician. Please do not remove the case of the power supply by yourself!（2）Risk of irreparable damage. LED power supplies with IP64 to IP66 rating must be located indoors or in a location where these units can be sheltered from the rain if outdoors.（3）Please do not install LED power supplies in places with high ambient temperature or close to fire source.Please refer to the specifications about the maximum ambient temperature limitations.（4）Output current and output wattage must not exceed the rated values on the specifications.（5）The FG ( ) must be well connected to PE(protective earth) if the unit equips with it.（6）All MW’s PSUs are designed in accordance with EMC regulations and the related test reports are available by request. Since they are belong to component power supplies and will be installed inside system enclosure, when they are integrated into a system, the EMC characteristics of the end system must be re-verified again. Manufacturer：MEAN WELL ENTERPRISES Co., LTD.No.28, Wuquan 3rd Rd., Wugu Dist.,New Taipei City 24891, TaiwanTel: +886-2-2299-6100Web: Branch Office：ChinaMEAN WELL (GUANGZHOU) ENTERPRISES Co., LTD.2F, A Building, Yuean lndustry Park, Huangcun,Dongpu Yown, Tianhe District, Gungzhou, ChinaPost Code:510660Tel: +86-20-2887-1200Web: U.S.A.MEAN WELL USA, INC.44030 Fremont Blvd., Fremont,CA 94538, U.S.A.Tel: +1-510-683-8886Web: EuropeMEAN WELL EUROPE B.V.Langs de Werf 8, 1185XTAmstelveen, The NetherlandsTel: +31-20-758-6000Web: www.meanwell.euDeclaration of China RoHS ConformityIn order to reduce the impacts on the environment and take the more responsibility for protecting the earth, MEAN WELL is confirming and announcing the conformity to China RoHS, an Administrative Measures for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products.Environment Friendly Use Period LabelNames and Contents of Hazardous Substances Lists。
台湾明纬开关电源手册
FUNCTION DC OK SIGNAL
The TTL signal out, PSU turn on = 3.3 ~ 5.6V ; PSU turn off = 0 ~ 1V
OUTPUT VOLTAGE TRIM Note.6 Adjustment of output voltage is possible between 40 ~ 110% of rated output
DC OK V_TRIM
AUX POWER
O.V.P.
RECTIFIERS CONTROL ON/OFF FAN RECTIFIERS
10 ~ 13.5V
150mVp-p 13.5 ~ 16.5V
150mVp-p 20 ~ 26.4V
150mVp-p 24 ~ 30V
150mVp-p 43 ~ 55V
VOLTAGE TOLERANCE Note.3 1.0%
1.0%
1.0%
1.0%
1.0%
LINE REGULATION
0.5%
0.5%
Forced air cooling by built-in DC fan High power density 10.7w/inch3
1U low profile 41mm
Active current sharing up to 4000W(3+1) (Note.8)
DC OK Signal
Built-in remote ON-OFF control
1000W Single Output Power Supply
RSP-1000 series
Features : Universal AC input / Full range
明纬电源型号分类
E-45O SE-6OO SE-IOOO SE-15OO SC-15O
G1系列基础数据
基础数据
功
率75-750W
说
*内建主动式功率因子矫正功能(active -100SP-150SP-200SP-320SP-480 SP
G3系列
NE系列
AC/DC-机壳型交换式电源供应器
功
输
率
15-150W
岀
1234
说 明
*小型化
*高信赖度，可承受5G震动与70C高工作环温,全机使用
105C
高寿命电解电容
,可承受300VAC突波输入达5秒
*适合使用于较严苛的工作环境
型
号
RS-15RS-25RS-35RS-50RS-75RS-100RS-150
说* 2OOW以上机型不具备CE（S-24O除外）
明* 15年以上市场销售之常青安规机型，现正有数百万台各式机种
S-25
S-4O
S-6O
S-1OOF
-32O
D-6O
ID-6O
T-6O
2O
T-12O
Q-12O
Q-25O
应用于各类型终端设备中
S-15OS-21OS-25O S
IT-6OQ-6OIQ-6OD-1
RD-35RD-50RD-65RD-85RD-125 RID-50RI
D-65 RID-85
RID-125RT-50RT-65RT-85
RT-12
5RQ-50
RQ-65RQ-85RQ-125
基础数据
G2系列
NET-5O NET-75 NES-2OO NES-35O
基础数据
台湾明纬led电源HLG-480H
HLG-480Hseries■Model Encoding Function optionsRated output voltage (24V/30V/36V/42V/48V/54V)Rated wattage Series name■DescriptionHLG-480H series is a 480W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-480H operates from 90305VAC and offers models with different rated voltage ranging ～between 24V and 54V. Thanks to the high efficiency up to 95.5%, with the fanless design, the entire series is able to operate for -40~ +90℃℃case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications.HLG-480H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.Constant Voltage + Constant Current mode output Metal housing with class design I Built-in active PFC functionIP67 / IP65 for indoor or outdoor installations design Function options: output adjustable via potentiometer;3 in 1 dimming (dim-to-off, isolated design) ; smart timer dimming; junction boxTypical lifetime > 62000 hours 7 years warranty (Note.9) LED HarbourLED greenhouse lighting LED statium lighting LED mining lightingType HL for use in Class Division 2Ⅰ, hazardous(Classified) location■Features■Applications24AF110SELVIP65IP67Type HLSPECIFICATION※Smart timer dimming function (for Dxx-Type by User definition)MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,please contact MEAN WELL for details.Ex :D01-Type: the profile recommended for residential lighting◎**:TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:[1]The power supply will switch to the constant current level at 100% starting from 6:00pm.[2]The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.[3]The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.[4]The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.Set up for D01-Type in Smart timer dimming software program:TIME**06:00T1T2T3T407:0011:00---LEVEL**100%70%50%70%D i m m i n g L e v e l (%)Operating Time(HH:MM)Ex:D02-Type: the profile recommended for street lighting◎**:TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:[1]The power supply will switch to the constant current level at 50% starting from 5:00pm.[2]The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.[3]The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.[4]The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.[5]The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on.The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.Set up for D02-Type in Smart timer dimming software program:TIME**01:00T1T2T3T4T503:008:0011:00---LEVEL**80%50%100%60%80%D i m m i n g L e v e l (%)Operating Time(HH:MM)Ex:D03-Type: the profile recommended for tunnel lighting◎Set up for D03-Type in Smart timer dimming software program:TIME**01:30T1T2T311:00---LEVEL**70%100%70%**:TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance:[1]The power supply will switch to the constant current level at 70% starting from 4:30pm.[2]The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on.[3]The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.D i m m i n g L e v e l (%)Operating Time(HH:MM)。
LED 防水电源供应器 说明书
60 ~ 240W 30 ~ 96 W 30 ~ 60 W 18 ~ 60 W 30 ~ 60 W CLG 系列PLN 系列ELN 系列LP 系列PLP 系列- PFC 功能 / 金属外壳- PFC 功能 / 塑胶外壳- 塑胶外壳- 塑胶外壳- 基板型明纬企业股份有限公司成立于1982 年,位于台湾台北县,是交换式电源供应器的领导品牌制造商之一. 主要产品包括交流/直流交换式电源供应器,直流/直流转换器,直流/交流变流器及电池充电器.每年有数百万明纬品牌的交换式电源供应器销往70多个国家.目前我们在台湾台北,中国广州和苏州设立了制造工厂,有先进的产品制造能力,同时在中国,美国,欧洲设立了分公司.明纬的许多工业电源已经被广泛应用于世界各地 LED 显示屏行业,同时也因其高信赖度取得良好声誉.为符合全球节能发展趋势,明纬将投入大量资源开发新一代绿色环保概念的电源供应器.LED 电源供应器正是其中之一,其特点是具有更高效率,更低损耗及符合世界各国最新照明法规要求.明纬LED 电源供应器已经广泛应用于路灯照明,建筑照明,装饰照明,室内照明,舞台灯及剧场灯光,嵌入式照明及LED 显示屏等.更高防水防尘等级设计使其适合各种室内或室外LED 应用.索引LP 系列ELN 系列PLN 系列CLG 系列PLP 系列如何选择一款合适的LED电源供应器?开发中的产品1-234567-89关于明纬LPL-18LPH-18LPV-20LPV-35LPV-60输 入输 出特 性• 国际通用全范围90~264VAC输入 (LPV)• 仅180~264VAC 输入 (LPH-18)• 仅90~132VAC 输入 (LPL-18)• 全密封内部灌胶，符合 IP67 等级• 保护功能: 短路 / 过载 / 过压过温 (仅LPH-18 / LPL-18 )• 恒压设计 (恒压模式)• 可耐受瞬间300VAC交流输入电压达5秒钟• UL1310 Class 2 电源交流输入电压范围90~132VAC180~264VAC90~264VAC交流突入电流(最大.)冷启动,40A at 115VAC冷启动,50A at 230VAC冷启动,70A at 230VAC冷启动,60A at 230VAC过载保护范围>105%110%~150%模式打嗝模式,自动恢复过压保护115~135% 额定输出电压耐压I/P-O/P: 3KVAC工作温度-25~+70O C-30~+70O C-30~+75O C-30~+60O C振动10~500Hz, 2G 10 分钟 / 周期, X, Y, Z 轴各60 分钟安全标准参照 UL1310, TUV EN60950-1 设计参照 EN61347-2-13 设计,通过UL1310 (LPV-60-5除外), CAN/CSA-C22.2No. 223-M91 (LPV-60-5, LPV-60-48除外) 认证电磁兼容标准FCC part 15 class B EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, ENV50204连接器(输入/输出)UL 标准, 18AWGx2C (30cm)UL 标准,18AWGx2C (60cm)UL 标准, 16AWGx2C (60cm)尺寸 (长x宽x高)(mm)140x 30x 20118x 35x 26148x 40x 30162.5x 42.5x 32包装0.175kg ; 70pcs / 13.3kg / 0.66CUFT0.22kg ; 60pcs / 14.2kg0.34kg ; 40pcs / 14.6kg0.4kg ; 32pcs / 13.8kg• Class II 隔离, 无 F.G.• 自然风冷散热• 通过 LPS (限功率电源)测试• 100% 满载老化测试• 低成本, 高信赖度• 适用于以LED为光源的装饰及建筑照明, 舞台灯及剧场照明, LED 电子显示屏• 2 年保修期•LPL-18 系列(恒压模式)•LPV-35 系列(恒压模式)•LPH-18 系列(恒压模式)•LPV-20 系列(恒压模式)•LPV-60 系列(恒压模式)型号输出电压误差精度纹波与噪声效率LPH-18-1212V, 0~1.5A±3%120mV78%LPH-18-2424V, 0~0.75A±3%150mV82%LPH-18-3636V, 0~0.5A±3%200mV83%型号输出电压误差精度纹波与噪声效率LPL-18-1212V, 0~1.5A±3%120mV80%LPL-18-2424V, 0~0.75A±3%150mV83%LPL-18-3636V, 0~0.5A±3%200mV84%型号输出电压误差精度纹波与噪声效率LPV-20-55V, 0~3.0A±5%80mV77%LPV-20-1212V, 0~1.67A±5%120mV81%LPV-20-1515V, 0~1.33A±5%120mV83%LPV-20-2424V, 0~0.84A±5%150mV83%型号输出电压误差精度纹波与噪声效率LPV-35-55V, 0~5.0A (peak 6A)±6%80mV77%LPV-35-1212V, 0~3.0A±5%120mV84%LPV-35-1515V, 0~2.4A±5%120mV84%LPV-35-2424V, 0~1.5A±5%150mV85%LPV-35-3636V, 0~1.0A±5%150mV85%型号输出电压误差精度纹波与噪声效率LPV-60-55V, 0~8.00A±8%80mV76%LPV-60-1212V, 0~5.00A±5%120mV83%LPV-60-1515V, 0~4.00A±5%120mV83%LPV-60-2424V, 0~2.50A±5%150mV86%LPV-60-3636V, 0~1.67A±5%150mV86%LPV-60-4848V, 0~1.25A±5%150mV86% 18~60W 单组输出符合 Class 2 电源(LVD)LPC-60LPC-35LPC-20输 入输 出•LPC-20 系列(恒流模式)•LPC-60 系列(恒流模式)•LPC-35 系列(恒流模式)特 性• 国际通用全范围90~264VAC输入• 全密封内部灌胶，符合 IP67 等级• 保护功能: 短路 / 过载 / 过压• 恒流设计 (恒流 +恒压模式)• 可耐受瞬间300VAC交流输入电压达5秒钟• Class II 隔离, 无 F.G.• 自然风冷散热型号输出电压误差精度纹波与噪声效率LPC-20-350 3~48V, 350mA±5%200mV83%LPC-20-7003~30V, 700mA±5%200mV83%型号输出电压误差精度纹波与噪声效率LPC-35-7009~48V, 700mA±5%200mV85%LPC-35-10509~30V, 1050mA±5%200mV85%LPC-35-14009~24V, 1400mA±5%200mV85%型号输出电压误差精度纹波与噪声效率LPC-60-10509~48V, 1050mA±5%200mV87%LPC-60-14009~42V, 1400mA±5%200mV85%LPC-60-17509~34V, 1750mA±5%200mV87%交流输入电压范围90~264VAC交流突入电流(最大.)冷启动, 70A at 230VAC冷启动, 60A at 230VAC过载保护Range±5%Type定电流限制,自动恢复过压保护115~135% 额定输出电压耐压I/P-O/P: 3KVAC工作温度-30~+70O C-30~+75O C-30~+70O C振动10~500Hz, 2G 10 分钟 / 周期, X, Y, Z 轴各60 分钟安规标准通过UL1310, CAN/CSA-C 22.2 NO. 223-M91( LPC-20-350, LPC-35-700, LPC-60-1050/1400除外 ) 认证;参照 TUV EN60950-1, EN61347-2-13 设计电磁兼容标准EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, ENV50204连接器(输入/输出)UL 标准, 18AWGx2C (60cm)UL 标准, 16AWGx2C (60cm)尺寸 (长x宽x高)(mm)118x 35x 26148x 40x 30162.5x 42.5x 32包装0.22kg ; 60pcs / 14.2kg0.34kg ; 40pcs / 14.6kg0.4kg ; 32pcs / 13.8kg• UL1310 Class 2 电源• 通过 LPS (限功率电源)测试• 100% 满载老化测试• 低成本, 高信赖度• 适用于以LED为光源的装饰及建筑照明, 舞台灯及剧场照明, LED 电子显示屏• 2 年保修期20~60W 单组输出符合 Class 2 电源►►EN61347-2-13 特殊符号任何状况下本机外壳之表面温度都不会超过110O C可装置于可燃材料的表面,如木头 (厚度大于2mm)依据 VDE0710-14可安装于木箱内,但需与周边保持一定距离Limited Power Source-限功率电源可满载工作最高环温为 40O C,此时机壳，表面温度小于 < 80O CEN61347, 规定输出电压低于34V peak/48VDC 以下者可标示此符号110FM MLPSt c: 80o Ct a: 40o CSELVEQUIVALENTELN-30ELN-60输 入输 出(标准)输 出(调光功能)特 性• 国际通用全范围90~264VAC输入• 全密封绝缘机壳，符合 IP64 等级•内建可调整输出电流的定电流线路 (恒流 +恒压模式)• 保护功能: 短路 / 过载 / 过压•可选调光功能: 1~10VDC(D 型式) 或 PWM (P 型式) 控制• UL1310 Class 2 电源• 自然风冷散热交流输入电压范围90~264VAC ; 127~370VDC交流突入电流(最大.)冷启动, 60A at 230VAC直流电压可调范围±10% 额定输出电压过载保护95%~110% 定电流限制,自动恢复95%~130% 定电流限制,自动恢复过压保护范围110%~150% 额定输出电压模式关闭输出电压,重启后恢复耐压I/P-O/P: 3KVAC工作温度-20~+60O C (请参照输出减额曲线)振动10~500Hz, 2G 10 分钟 / 周期, X, Y, Z 轴各60 分钟安规标准通过UL1310, CAN/CSA-C22.2 No. 22.2 No. 223-M91( 48V除外 ) 认证; 参照 TUV EN60950-1, EN61347-2-13设计电磁兼容标准EN55022 class B, EN61000-3-2,3 , EN61000-4-2,3,4,5,6,8,11, ENV50204连接器输入/输出: UL 标准, 18AWGx2C (30cm); 输出(带可选调光功能): 18AWGx4C (30cm)尺寸 (长x宽x高)(mm)145x 47x 30181x 61.5x 35包装0.26kg ; 60pcs / 16.6kg0.4kg ; 24pcs / 11.0kg• 适用于经济型LED 室内照明及 LED 电子显示屏• 2 年保修期•ELN-30 系列•ELN-60 系列►►调光控制(可选)D 型式:1~10Vdc 外加控制讯号P 型式:PWM 控制讯号Vdc:1~10VVdc+DIM+DIM-ELN控制输入ft1f: 100Hz ~ 3KHzt2V10VfDuty= t1 , 0~100%t1+t2Low: 0VHigh: 10V ELN系列可选购调光功能(Dimming function),使用者可采用外加1~10VDC控制讯号(D型式),或外加PWM控制讯号(P型式)来调整输出电流,以达到减少LED输出亮度或节省能源的目的.型号输出电压误差精度纹波与噪声效率ELN-30-55V, 0~5.0A±5%80mV75%ELN-30-99V, 0~3.4A±5%100mV80%ELN-30-1212V, 0~2.5A±5%120mV82%ELN-30-1515V, 0~2.0A±5%120mV82%ELN-30-2424V, 0~1.25A±5%150mV85%ELN-30-2727V, 0~1.12A±5%150mV85%ELN-30-4848V, 0~0.63A±5%250mV87%型号输出电压误差精度纹波与噪声效率ELN-60-99V, 0~5.0A±5%120mV82%ELN-60-1212V, 0~5.0A±5%120mV85%ELN-60-1515V, 0~4.0A±5%150mV86%ELN-60-2424V, 0~2.5A±5%150mV87%ELN-60-2727V, 0~2.3A±5%200mV87%ELN-60-4848V, 0~1.3A±5%250mV88% 30~60W 单组输出符合 Class 2 电源型号: ELN- 30 - 5 D型号 : ELN- 30 - 5 P输 入(PLN-60/100)输 入(PLN-30)输 出30~96W 单组输出符合Class 2带PFC 功能电源交流输入电压范围90~264VAC ; 127~370VDC 交流突入电流(最大.)冷启动, 40A at 230VAC直流电压可调范围±10% 额定输出电压可由内部电位器调整0%~ -15% 额定输出电压电流可调范围3%~ -25% 额定输出电流可由内部电位器调整0%~-25% 额定输出电流过载保护110%~120% 定电流限制, 自动恢复95~130% 定电流限制, 自动恢复95%~102% 定电流限制, 自动恢复过压保护110%~155% 额定输出电压115%~140% 额定输出电压107%~135% 额定输出电压启动, 上升, 保持时间1500ms, 150ms 在230VAC 满载, 无保持时间1500ms, 100ms 在230VAC 满载, 无保持时间1200ms, 80ms, 60ms 在230VAC 满载耐压I/P-O/P: 3KVACI/P-O/P: 4.25KVDCI/P-O/P: 3.75KVAC工作温度-30~+50OC (请参照输出减额曲线)安规标准通过UL1310 Class 2, CAN/CSA-C22.2 No.223-M91 (48V 除外), EN61347-1, EN61347-2-13 认证通过TUV EN60950-1, UL879 (listed in Sign Components Manual – SAM) 认证(PLN-100 & PLC-100)电磁兼容标准EN55015, EN55022 class B(PLN-60/100, PLC-100), EN61000-3-2 Class C , EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61547连接器输入UL 标准, 18AWGx2C (30cm)UL 标准, 18AWGx3C (30cm) (PLN-60/100)输出UL 标准, 18AWGx2C (30cm) (PLN-60/100)尺寸 (长x 宽x 高)(mm)145x 47x 30181x 61.5x 35200x 70.5x 35包装0.22kg ; 60pcs / 14.2kg0.5kg ; 24pcs / 13.0kg0.52kg ; 20pcs / 11.4kg特 性• 国际通用全范围90~264VAC 输入 • 全密封绝缘机壳，符合 IP64 等级 • 内置主动式功率因数矫正功能, 当负载≥75%时PF>0.9 (PLN-30: 80%)• 保护功能:短路 / 过载 / 过压 / 过温• 内建定电流线路(恒流 +恒压模式)• 输出电压和过流保护点可调• UL1310 Class 2 电源• 自然风冷散热• 100% 满载老化测试• 适用于各种LED 照明及 LED 电子显示屏• PLC-100 采用端子台式输入输出连接器 (无IP 等级)• 2 年保修期PLC-100PLN-30PLN-60PLN-100PLC-100•PLN-30 系列型号输出电压误差精度纹波与噪声效率PLN-30-99V , 0~3.3A ±10% 2.6V 80%PLN-30-1212V , 0~2.5A ±10% 2.0V 83%PLN-30-1515V , 0~2.0A ±10% 2.6V 84%PLN-30-2020V , 0~1.5A ±10% 2.0V 84%PLN-30-2424V , 0~1.25A ±10% 2.6V 85%PLN-30-2727V , 0~1.12A ±10% 2.3V 85%PLN-30-3636V , 0~0.84A ±10% 4.5V 86%PLN-30-4848V , 0~0.63A±10%3.7V86%PLN-60-2020V , 0~3.0A ±10% 1.8V 86.5%PLN-60-2424V , 0~2.5A ±10% 2.7V 86.5%PLN-60-2727V , 0~2.3A ±10% 2.7V 87.0%PLN-60-3636V , 0~1.7A ±10% 3.6V 87.0%PLN-60-4848V , 0~1.3A±10%4.6V88.0%•PLN-60 系列型号输出电压误差精度纹波与噪声效率PLN-60-1212V , 0~5.0A ±10% 2.0V 83.0%PLN-60-1515V , 0~4.0A±10%2.4V84.5%•PLN-100 系列型号输出电压误差精度纹波与噪声效率PLN-100-1212V , 0~5.00A ±3%150mV 83%PLN-100-1515V , 0~5.00A ±3%150mV 85%PLN-100-2020V , 0~4.80A ±3%150mV 87%PLN-100-2424V , 0~4.00A ±3%150mV 87%PLN-100-2727V , 0~3.55A ±3%150mV 87%PLN-100-3636V , 0~2.65A ±2%150mV 87%PLN-100-4848V , 0~2.00A±2%200mV87%110FMMLPSSELV EQUIVALENT110F M MLPSSELV EQUIVALENT110F MMLPSSELV EQUIVALENT输 入输 出AB C 特 性• 国际通用全范围90~264VAC 输入 • 保护功能:短路 / 过载 / 过压 / 过温• 内置主动式功率因数矫正功能, 当负载≥75%时PF>0.9 • I P67 / IP65 设计,适合户内外安装 (C 型式除外)• 过流保护点可通过输出线控制或内部可变电阻进行调整 (CLG-150/240)• UL1310 class2 电源 (CLG-60&100)• 自然风冷散热• 适用于各种LED 照明, 路灯照明及LED 显示屏• 内置恒流限制 (恒流 +恒压模式)• 符合 4KV 耐突波等级 (IEC 61000-4-5)• 可选型式 CLG-150/240-12 : =A: 符合IP65. 输出电压及恒流点可通过内部可变电阻进行调整 =B: 符合 I P67. 输出恒流点可通过输出控制线进行调整 (可选) =C: 无IP 等级. 采用端子台作为输入/输出连接器. 输出电压及恒流点可 通过内部可变电阻进行调整 (可选) =空白: 符合 I P67. 输入/输出连接线(可选)• 3年保修期交流输入电压范围90~264VAC; 127~370VDC 90~280VAC; 127~396VDC 交流突入电流(最大.)冷启动, 40A at 230VAC冷启动, 65A at 230VAC直流电压可调范围用定电阻.可在 ±10% (CLG-60) 或 0~-15% (CLG-100) 额定输出电压之间修改A 型式和C 型式可通过内部可变电阻调整电流可调范围用定电阻.可在 +3%~-25% 额定输出电流之间修改可通过内部可变电阻调整 (A 和C 型式) 或 通过输出线 (B 型式)过载保护95%~130% 定电流限制,自动恢复95%~102% 定电流限制,自动恢复95%~108% 定电流限制,自动恢复过压保护110%~140%107%~135%110%~142% 额定输出电压启动, 上升, 保持时间1500ms, 150ms, 无保持时间1200ms, 80ms, 60ms在230VAC 满载3000ms, 80ms, 20ms 在230VAC 满载耐压I/P-O/P: 4.25KVDC I/P-O/P: 3.75KVAC, I/P-FG: 1.88KVAC, O/P-FG: 1.5KVAC工作温度-30~+70OC (请参照输出减额曲线)安规标准通过UL1310 Class 2, EN61347-1, EN61347-2-13,CAN/CSA-C22.2 No.223-M91 (48V 除外) 认证通过UL60950-1, UL1012, TUV EN60950-1, EN61347-1,EN61347-2-13 认证 (CLG-240 申请中)TUV EN60950-1 & UL879 (SAM list) (CLG-100)电磁兼容标准EN55015, EN55022 class B, EN61000-3-2 class C, EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61547连接器输入UL 标准, 18AWGx3C (30cm)UL 标准, 18AWGx3C (30cm); 可选端子台(C 型式)输出UL 标准, 18AWGx2C (30cm) = A / 空白 : 14AWGx2C (30cm)= B : 14AWGx2C (30cm)+18AWGx2C (30cm)= C : 端子台尺寸 (长x 宽x 高)(mm)172x 61.5x 39222x 68x 39222x 68x 39244x 68x 39包装0.86kg ; 16pcs / 14.8kg 1.0kg ; 12pcs / 13kg 1.0kg ; 12pcs / 13kg -----型号输出电压误差精度纹波与噪声效率CLG-60-1212V , 0~5.0A ±10% 2.0V 83.0%CLG-60-1515V , 0~4.0A ±10% 2.4V 84.5%CLG-60-2020V , 0~3.0A ±10% 1.8V 86.5%CLG-60-2424V , 0~2.5A ±10% 2.7V 86.5%CLG-60-2727V , 0~2.3A ±10% 2.7V 87.0%CLG-60-3636V , 0~1.7A ±10% 3.6V 87.0%CLG-60-4848V , 0~1.3A±10%4.6V88.0%•CLG-60 系列 •CLG-150 系列•CLG-100 系列CLG-60CLG-100CLG-150 & CLG-240•CLG-240 系列型号输出电压误差精度纹波与噪声效率CLG-150-12 A 12V , 0~11.0A ±2%150mV 88%CLG-150-15 A 15V , 0~9.50A ±2%150mV 88%CLG-150-20 A 20V , 0~7.50A ±2%150mV 90%CLG-150-24 A 24V , 0~6.30A ±1%150mV 90%CLG-150-30 A 30V , 0~5.00A ±1%150mV 90%CLG-150-36 A 36V , 0~4.20A ±1%150mV 89%CLG-150-48 A 48V , 0~3.20A ±1%200mV90%□= A(标准型号) or B, C, 空白 (可选型号)型号输出电压误差精度纹波与噪声效率CLG-240-12 A 12V , 0~18.0A ±2%150mV 90%CLG-240-15 A 15V , 0~15.0A ±2%150mV 90%CLG-240-20 A 20V , 0~12.0A ±1%150mV 92%CLG-240-24 A 24V , 0~10.0A ±1%150mV 92%CLG-240-30 A 30V , 0~8.00A ±1%150mV 92%CLG-240-36 A 36V , 0~6.70A ±1%150mV 93%CLG-240-48 A 48V , 0~5.00A ±1%200mV93%□= A(标准型号) or B, C, 空白 (可选型号)60~240W 单组输出带 PFC 功能电源110110110F F F M MM MLPS LPS LPSSELV EQUIVALENT SELV EQUIVALENTSELV EQUIVALENTClass 2Class 2UL/CUL/TUV/CE pending型号输出电压误差精度纹波与噪声效率CLG-100-1212V , 0~5.00A ±3%150mV 83%CLG-100-1515V , 0~5.00A ±3%150mV 85%CLG-100-2020V , 0~4.80A ±3%150mV 87%CLG-100-2424V , 0~4.00A ±3%150mV 87%CLG-100-2727V , 0~3.55A ±3%150mV 87%CLG-100-3636V , 0~2.65A ±2%150mV 87%CLG-100-4848V , 0~2.00A±2%200mV87%BlankPLP-30 & PLP-60特 性交流输入电压范围90~264VAC; 127~370VDC 交流突入电流(最大.)冷启动, 40A at 230VAC 输出电流可调范围50%~100% 额定电流过载保护范围100 ~ 110%模式定电流限制,自动恢复过压保护115~135% 关闭输出,自动恢复启动, 上升, 保持时间2000ms, 100ms 在230VAC 满载, 无保持时间耐压I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, 1 分钟工作温度-30~+70O C (请参照输出减额曲线)安规标准参照 UL60950-1, TUV EN61347-1, EN61347-2-13设计电磁兼容标准EN55015, EN61000-3-2 Class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61547连接器3+2P / 3.96mm 脚距, JST P/N: B3P / B2P-VH 尺寸 (长x 宽x 高)(mm)101.6x 50.8x 28• 国际通用全范围90~264VAC 输入• 保护功能:短路 / 过载 / 过压 • 内置主动式功率因数矫正功能, 当负载≥75%时PF>0.9• 自然风冷散热• 内建定电流线路 (恒流 +恒压模式)• 100% 满载老化测试• 适用于内置LED 照明系统• 2 年保修期型号输出电压误差精度纹波与噪声效率PLP-30-1212V , 0~2.5A ±10% 2.0V 83.0%PLP-30-2424V , 0~1.3A ±10% 2.6V 86.5%PLP-30-4848V , 0~0.63A±10%3.7V87.5%型号输出电压误差精度纹波与噪声效率PLP-60-1212V , 0~5.0A ±10% 4.5V 83.0%PLP-60-2424V , 0~2.5A ±10% 4.5V 86.5%PLP-60-4848V , 0~1.3A±10%4.3V87.5%►►比较图表型号外壳 灌胶PFC可调整 电压/ 电流IP 等级保持时间纹波与噪声可选的调光功能应用金属塑胶CLG-150/240(Non class 2)65/67一般一般泛用型CLG-10067一般一般泛用型CLG-6067无高LED PLN-10064一般一般泛用型PLN-6064无高LED PLN-3064无高LED PLC-100---一般一般泛用型ELN-6064一般一般泛用型ELN-3064一般一般泛用型LPH/LPL-18LPV/LPC-20/35/6067一般一般泛用型PLP-30/60基板型仅电流可调---无高LED30~60W 单组输出带 PFC 功能电源•PLP-30 系列•PLP-60 系列建议的系统设计• 依负载所需决定合适的功率,包括安全裕量 .• 确认所设计的 LED 驱动电路: 用电流直接驱动 (选择具有恒流模式的LED 电源)或外加定电流驱动IC 达到更准确的恒流效果 (选择具有恒压或恒流模式的LED 电源)• 确认是否需要具备PFC 功能.• 确认 LED 电源安装工作环境,是否有防尘/防潮要求(IP 等级). • 确认需符合何种安规认证.• 是否需要调整输出电压,电流或调光功能?设定电路图描述P 优点 & 缺点使用恒流式电源不需加限流电阻和 LED 驱动 IC使用明纬电源作为恒流源直接驱动LED 阵列.优点:成本及配接复杂度对LED 应用场合最适中,仅需考虑LED 本身特性差异.缺点:每路驱动电流均流性不佳使用恒压式电源每路需加限流电阻R =[V -(V F1+V F2+...+V Fn )]/I F 备注:V : LED 电源供应器额定输出电压 V F : LED 顺向电压 I F : LED 驱动电流例子:使用LPV-60-24(24V/2.5A)驱动LED 串联6颗并联1～4 路R = [24-(6x3)]/(2.5/4)=10Ω优点:• 成本低• 简单易配接缺点:• L ED 亮度不均匀• 效率低使用恒压式电源使用驱动 IC 作为恒流源 (不加限流电阻)PWM 恒流源自动调节控制电流达成均流效果优点:• 效率高• 每路均流性佳• L ED 寿命长缺点:• 成本高• 配接复杂度高• 需考量EMC 问题明纬 LED 电源CLG-150-24+V(红)-V(黑)... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...6.3A0.35A0.35A0.35AFor 1W LED, V F =3.2V , I F =0.35A 并联连接:6.3A / 0.35A=1818 路需并联连接CLG-150-24恒流范围为:12~24V , 所以LED 串联必须是 4～7颗.明纬 LED 电源LPV-60-24+V(红)-V(黑)I FRI FRV F1V F2V F3V Fn... ...... ...... ...... ...... ...I FR明纬 LED 电源LPV-60-24+V(红)-V(黑)... ...... ...... ...... ...... ...驱动 IC因输出负载需达到75%以上可确保PF>0.9,因此建议串联接6～7颗.快速选择导视图应用举例仅 115V仅 230V全范围LPL-18 系列LPH-18 系列LPV-20/35/60 系列无 PFC无 PFCPFC输出电压/电流可调ELN-30/60 系列(可选调光功能)输出电压/电流不可调金属外壳(IP65~67)塑胶外壳(IP64)基板型PLP-30/60 系列PLN-30/60/100 系列CLG-60/100/150/240 系列LPC-20/35/60 系列恒流+恒压(C.C.+C.V.)恒压(C.V.)路灯照明舞台照明嵌入式照明建筑照明室内照明装饰照明150W U 型具有PFC功能电源20W 具有PFC 功能塑胶外壳电源 20W 具有PFC 功能基板型电源U • 型无上盖,无IP 等级 • 适合恒压应用(恒压模式) • 国际通用交流输入 90~280VAC • 可耐受瞬间300VAC 交流输入电压达30秒钟 • 可以提供300% 额定负载达30秒钟 • 内置主动式功率因数矫正功能, 当负载≥75%时PF>0.9 • 符合 EN61000-3-2 Class C (>75% 负载) • 保护功能: 短路 / 过载 / 过压 / 过温 • 利用TTL 信号作为过温报警信号 • 参照 UL1012, EN61347-2-13, UL60950-1设计 • 电磁兼容标准:EN55015, EN55022 Class B, EN61547, EN61000-4-2,3,4,5,6,8,11 3 • 年保修期 • 应用: 适用于LED 路灯照明 (内置型), LED 室内照明PLN-20: • 塑胶外壳, IP64 等级, 适合室内高防潮防尘等级设备 PLP-20: • 基板型, 适合安装在照明系统的外壳里面 • 内置主动式功率因数矫正功能, 当负载≥75%时PF>0.9 • 符合 EN61000-3-2 Class C (>75% 负载) • 内建定电流线路 (恒流 +恒压模式) • 适合LED 工作范围: 70~100% 额定输出电压 • 国际通用交流输入 85~264VAC • 保护功能: 短路 / 过载 / 过压 / 过温 • 参照 UL1310, EN61347-2-13 设计 • 电磁兼容标准: EN55015, EN61547 2 • 年保修期 • 应用: 适用于各种LED 照明及 LED 电子显示屏ULP-150 系列PLN-20 系列 P L P -20 系列 60~96W 经济型符合Class 2 具有PFC 功能和调光功能电源 CEG-100: • 金属外壳,IP66 等级, 适合户外设备 PEN-100: • 塑胶外壳,IP64 等级, 适合室内高防潮防尘等级设备 • 内置主动式功率因数矫正功能, 当负载≥75%时PF>0.9 • 符合 EN61000-3-2 Class C (>75% 负载) • 内建定电流线路 (恒流 +恒压模式) • 适合LED 工作范围: 50~100% 额定输出电压 • 国际通用交流输入 85~300V • 保护功能: 短路 / 过载 / 过压 / 过温 • 参照 UL1310, EN61347-2-13 设计 • 电磁兼容标准: EN55015, EN61547 • 低成本及高信赖度 • 可选购AC 调光功能 2~3 • 年保修期 • 应用: 适用于各种LED 照明, 路灯照明及LED 显示屏CEG-100 系列PEN-100 系列18W 经济型符合Class 2 LED 塑胶外壳电源 • 内建定电流线路 (恒流 +恒压模式) • 直流恒流输出: 350mA, 700mA, 800mA • 交流输入范围: 180~264VAC / LPHC-18, 90~132VAC / LPLC-18 • 保护功能: 短路 / 过载 / 过压 / 过温 • 参照 UL1310, EN61347-2-13 设计 • 低成本及高信赖度 • 2 年保修期 • 应用: 适用于以LED 为光源的装饰及建筑照明, 舞台及剧场照明, LED 电子显示屏LPHC-20 系列L P L C -20 系列备注: 以上开发中的产品的特性未来可能会改变将不另行通知!9。
明纬LED显示屏专用电源产品介绍说明书
图片来源：2020February明纬[MEAN WELL]成立于1982年，为世界标准交换式电源供应器领导品牌制造商之一。
目前在全球设有共三座生产基地（台湾、广州花都区、苏州）及五家财务独立之关联企业（台湾、美国、欧州、广州与苏州）。
明纬产品包含：AC/DC交换式电源、DC/DC转换器、LED防水电源、适配器（Adaptor）、电池充电器（Charger）以及DC/AC逆变器（Inverter）。
目前已超过10000种标准电源机型，广泛应用于医疗、工业自动化、电子、通讯、LED照明等领域。
明纬累积近40年经验，产品已经大量并广泛地被使用在LED显示屏,同时因其产品具备高信赖性及最佳性价比等特点，在客户端已经取得良好的品牌声誉及市场占有率。
多年来更致力于研发绿色节能电源产品。
美国明纬1研发团队不断精益求精，陆续推出新一代150~500W LED显示屏电源解决方案，电源均采用薄型化设计,可使得显示屏单元箱体设计更趋薄型和轻量化，便于运送安装；全系列产品更采用高效率节能线路设计，能有效降低电能耗用。
除提供单组及双组等多种机型选择之外，产品并符合UL、CUL、TUV、CCC、CB、CE等多项国际安规与电磁兼容测试标准与认证，适合于室内外LED电子广告牌、LED显示屏、小间距显示屏、LED字幕机以及LED电视墙等应用。
具备近40年的标准电源产品研发及制造经验，明纬公司拥有12大产品线，超过10000种标准电源产品，为客户提供【一站式】电源解决方案。
每一款产品从技术研发、设计、试作、设计验证(DVT)、设计品质测试(DQT)、选料、试产、认证、量产等，均通过严谨的设计与生产及品质管控程序与测试验证规范标准。
明纬在全球拥有200多家备库存之经销商，产品透过全球80多个国家地区。
样品于24小时内即可迅速提供，且没有最小订购量限制。
若您正在寻找高信赖度，品质稳定，价格合理、产品系列齐全的电源供应商，拥有最完整解决方案的明纬公司将是您的首选!苏州明纬台湾明纬广州明纬天河研发中心广州明纬花都产业园23ISO14000证书ISO9001证书ISO45001证书[MEAN WELL]的品牌意涵为[善意的标志， 品质的执着]。