810F-11-204中文资料
氟橡胶
氟橡胶Fluororubber
四、应用 1、汽车发动机 油封； 发动机膜片； 发动机缸套阻水圈； 燃油软管； 机油滤清器单向阀； 加油口盖 0型环； 变速箱及减速器油封等等
氟橡胶Fluororubber
2、石油 、 用于深井采油时，可承受149℃和420个大 气压的苛刻工作条件 ； 3、化工 、 可密封无机酸（如硫酸、浓盐酸，30%的 硝酸）； 有机溶剂（如氯代烃、苯、高芳烃汽油） 及其它有机物（如丁二烯、苯乙烯、丙烯、 苯酚、275℃下的脂肪酸等）
2.1 1#氟橡胶 氟橡胶 F23-偏氟乙烯与三氟氯乙烯共聚 1）耐酸性优异（硝酸）； 主要用于制备耐热、耐油、耐酸的橡胶制 品。 加工性能不好； 价格高。
氟橡胶Fluororubber
2.2 2#氟橡胶 氟橡胶 F26氟橡胶是用量最大的氟橡胶品种。 具有良好的贮存稳定性、电绝缘性和抗辐 射性； 加工性好； 优良的耐油、耐介质性； 极好的真空性能，可满足特殊场合的需要； 耐热性好。
氟橡胶Fluororubber
五、湖北派克垫片用氟橡胶 1、V747 常用 综合性能佳V747.doc 2、F076 耐油性好 F076.doc 3、V835 耐低温V835.doc 4、F602 G系列氟橡胶
F602-80介绍 介绍
一种特殊的氟橡胶（G系列）F602.doc
高含氟量（69-70%） 硫化体系不一样（APA）
氟橡胶 Fluororubber
密封件有限公司
.
氟橡胶Fluororubber
一、定义 氟橡胶是指主链或侧链的碳原子上含有氟 原子、并能进行硫化的一类合成高分子弹 性体。
氟橡胶Fluororubber
二、氟橡胶的主要类型 1、从主链结构上看，氟橡胶可以分为三种 基本类型： A)氟碳橡胶； B)氟硅橡胶； C)氟化磷腈橡胶。 其中以氟碳橡胶为主。
BASF适用表
各类树脂、薄膜、纺丝、注塑等加工
Heliogen（15:1号）K-6911
杰出的耐光耐热性，透明性好
各类树脂、薄膜、纺丝、注塑等加工
Heliogen（15:3号）K-7090
偏绿相、耐光耐热性好，透明性好，FDA认可
薄膜、注塑等，PP/PET纺丝
Heliogen（7号）K-8730
K2611/K2711（棕色钛锰）K-2915（铁红）K-2795（咖啡色颜料）
K1411/K4411（幻彩系列）
适用所有的树脂
优异的耐热、耐光性能，高遮盖力、FDA认可
用EPDM生产的保险杠、PP/PA/PET纤维
Paliogen（29号紫）苝红K-5011
优异的耐热、耐光性能，高透明、FDA认可
推荐用于PP/PA/PET纤维
Paliogen（19号紫）喹吖啶红K-4999
优异的耐热、耐光性能，高透明、FDA认可
薄膜、PP/PA/PET纤维、高档PCA产品
用于PA以外所用树脂，联苯胺类颜料黄83号的替代品
Paliotol（183号）偶氮K-2270
耐热300℃，FDA认可
用于PA以外所用树脂
酞
菁蓝绿系列
Heliogen（15号）K-6850
耐热180℃，优异的耐光、透明，Feliogen（15:1号）K-6902
黄颜料系列
Paliotol（138号）喹诺呋酞K-0961HD
偏绿相、热稳定260℃、耐光8级、FDA认可
包装、管道、薄膜、纤维
Paliotol（139号）异吲哚啉酮K-1841
偏红相、热稳定240℃、耐光8级、高透明
用于聚烯烃和纤维着色
Paliotol（183号）偶氮K-1700
巴斯夫安全技术说明书 Loxanol
安全技术说明书页: 1/11 巴斯夫安全技术说明书按照GB/T 16483编制日期 / 本次修订: 16.06.2023版本: 3.0日期/上次修订: 22.04.2014上次版本: 2.0日期 / 首次编制: 19.08.2013产品: 莱思诺 CA 5330 C12-C14脂肪酸甲酯混合物Product: Loxanol® CA 5330(30528203/SDS_GEN_CN/ZH)印刷日期 24.08.20231. 化学品及企业标识莱思诺 CA 5330 C12-C14脂肪酸甲酯混合物Loxanol® CA 5330推荐用途和限制用途: 油脂化学品原料公司:巴斯夫(中国)有限公司中国上海浦东江心沙路300号邮政编码 200137电话: +86 21 20391000传真号: +86 21 20394800E-mail地址: **********************紧急联络信息:巴斯夫紧急热线中心（中国）+86 21 5861-1199巴斯夫紧急热线中心（国际）:电话: +49 180 2273-112Company:BASF (China) Co., Ltd.300 Jiang Xin Sha RoadPu Dong Shanghai 200137, CHINA Telephone: +86 21 20391000Telefax number: +86 21 20394800E-mail address: ********************** Emergency information:Emergency Call Center (China):+86 21 5861-1199International emergency number: Telephone: +49 180 2273-1122. 危险性概述纯物质和混合物的分类:根据 GHS 标准，该产品不需要进行分类。
CHEMLOK 8110 商品安全数据表说明书
USA SAFETY DATA SHEET3000000013401. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct name: CHEMLOK 8110 Product Use/Class:Aqueous AdhesiveLORD Corporation 111 LORD DriveCary, NC 27511-7923 USATelephone: 814 868-3180Non-Transportation Emergency: 814 763-2345 Chemtrec 24 Hr Transportation Emergency No.800 424-9300 (Outside Continental U.S. 703 527-3887)EFFECTIVE DATE: 08/21/20192. HAZARDS IDENTIFICATIONGHS CLASSIFICATION:Skin sensitization Category 1Reproductive toxicity Category 1BSpecific target organ systemic toxicity (single exposure) Category 1 Respiratory system, Systemic toxicity Specific target organ systemic toxicity (repeated exposure) Category 1 Aspiration hazard Category 1Hazardous to the aquatic environment - acute hazard Category 2 Hazardous to the aquatic environment - chronic hazard Category 2GHS LABEL ELEMENTS: Symbol(s)Signal WordD ANGERHazard StatementsMay cause an allergic skin reaction.May damage fertility or the unborn child.Causes damage to organs.(Respiratory system, Systemic toxicity) Causes damage to organs through prolonged or repeated exposure. May be fatal if swallowed and enters airways. Toxic to aquatic life.Toxic to aquatic life with long lasting effects.Precautionary Statements PreventionObtain special instructions before use.Do not handle until all safety precautions have been read and understood. Wear protective gloves.Use personal protective equipment as required. Do not breathe dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling.Do not eat, drink or smoke when using this product.Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment.ResponseGet medical advice/attention if you feel unwell.IF exposed: Call a POISON CENTER or doctor/physician.Specific treatment (see supplemental first aid instructions on this label).IF ON SKIN: Wash with plenty of soap and water.If skin irritation or rash occurs: Get medical advice/attention.IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.Do NOT induce vomiting.Wash contaminated clothing before reuse.Collect spillage.StorageStore locked up.Disposal:Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.Other Hazards:This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s).Acute: Vapor harmful; may affect the brain or nervous system causing dizziness, headache or nausea. May cause central nervous system depression characterized by the following progressive steps: headache, dizziness, staggering gait, confusion, unconsciousness or coma. Possible irritation of the respiratory system can occur causing a variety of symptoms such as dryness of the throat, tightness of the chest, and shortness of breath. May cause skin and eyeirritation. May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses.Chronic: Prolonged or repeated contact may result in dermatitis. Repeated or prolonged solvent overexposure may result in permanent central nervous system damage. Formaldehyde may be released from this product in processes that involve heat. Formaldehyde is a skin and respiratory sensitizer, eye and throat irritant, and acute toxicant.Formaldehyde has been identified by NTP and IARC as a known human carcinogen (IARC 1), and by OSHA as a potential human carcinogen. Workplace exposure to formaldehyde is regulated by OSHA Standard 29 CFR1910.1048. IARC has designated carbon black as Group 2B - inadequate evidence for carcinogenicity in humans, but sufficient evidence in experimental animals. In 2006 IARC reaffirmed its 1995 finding that there is "inadequateevidence" from human health studies to assess whether carbon black causes cancer in humans. Further,epidemiological evidence from well-conducted investigations has shown no causative link between carbon black exposure and the risk of malignant or non-malignant respiratory disease in humans. IARC has designated titanium dioxide (TiO2) as Group 2B – possibly carcinogenic to humans in dust form. However, a number of long termanimal studies and human epidemiology studies evaluating TiO2 and workplace exposure show insufficient evidence for carcinogenic effects. EPA, NTP and OSHA do not designate TiO2 as a carcinogen and ACGIH designates TiO2 as A4 - not classifiable as a human carcinogen. Mortaility from other chronic diseases, including other respiratory diseases, was not associated with exposure to TiO2 dust. TiO2 is not present in this product as a dust and no airborne exposure is expected during application.3. COMPOSITION/INFORMATION ON INGREDIENTSChemical Name CAS Number RangeZinc compound PROPRIETARY 5 - 10%Carbon black1333-86-4 1 - 5%Propylene glycol monomethylether107-98-2 1 - 5%Nonylphenol ethoxylate compound PROPRIETARY0.1 - 0.9%Titanium dioxide13463-67-70.1 - 0.9%Resorcinol108-46-30.1 - 0.9%Any "PROPRIETARY" component(s) in the above table is considered trade secret, thus the specific chemical and its exact concentration is being withheld.The above Nonylphenol ethoxylate compound is listed by ECHA as an SVHC.4. FIRST AID MEASURESFIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding eyelids open while flushing. Get prompt medical attention.FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is difficult, give oxygen. Get immediate medical attention.FIRST AID - INGESTION: If swallowed, do not induce vomiting. Call a physician or poison control center immediately for further instructions. Never give anything by mouth if victim is rapidly losing consciousness, unconscious or convulsing.5. FIRE-FIGHTING MEASURESSUITABLE EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water FogUNSUITABLE EXTINGUISHING MEDIA: Not determined for this product.SPECIFIC HAZARDS POSSIBLY ARISING FROM THE CHEMICAL: Keep containers tightly closed. Closed containers may rupture when exposed to extreme heat. Use water spray to keep fire exposed containers cool. During a fire, irritating and/or toxic gases and particulate may be generated by thermal decomposition or combustion.SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS: Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). If water is used, fog nozzles are preferable.6. ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES: Avoid contact. Avoid breathing vapors. Use appropriate respiratory protection for large spills or spills in confined area.ENVIRONMENTAL PRECAUTIONS: Do not contaminate bodies of water, waterways, or ditches, with chemical or used container.METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP: Keep non-essential personnel a safe distance away from the spill area. Notify appropriate authorities if necessary. Avoid contact. Before attempting cleanup, refer to hazard caution information in other sections of the SDS form. Contain and remove with inert absorbent material.7. HANDLING AND STORAGEHANDLING: Keep closure tight and container upright to prevent leakage. Avoid skin and eye contact. Wash thoroughly after handling. Do not handle until all safety precautions have been read and understood. Empty containers should not be re-used. Use with adequate ventilation.STORAGE: Store only in well-ventilated areas. Keep from freezing. Keep container closed when not in use.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.8. EXPOSURE CONTROLS/PERSONAL PROTECTIONCOMPONENT EXPOSURE LIMITChemical Name ACGIH TLV-TWA ACGIH TLV-STELOSHA PEL-TWAOSHA PEL-CEILINGSkinZinc compound 2 mg/m310 mg/m3 5 mg/m3 N.E.N.A.Carbon black 3 mg/m3N.E. 3.5 mg/m3 N.E.N.A. Propylene glycolmonomethylether100 ppm150 ppm N.E. N.E.N.A.Nonylphenol ethoxylatecompoundN.E.N.E.N.E. N.E.N.A.Titanium dioxide10 mg/m3N.E.15 mg/m3 N.E.N.A.Resorcinol10 ppm20 ppm N.E. N.E.N.A.N.A. - Not Applicable, N.E. - Not Established, S - Skin DesignationEngineering controls: Sufficient ventilation in pattern and volume should be provided in order to maintain air contaminant levels below recommended exposure limits.PERSONAL PROTECTION MEASURES/EQUIPMENT:RESPIRATORY PROTECTION: Use a NIOSH approved chemical/mechanical filter respirator designed toremove a combination of particulates and organic vapor if occupational limits are exceeded. For emergencysituations, confined space use, or other conditions where exposure limits may be greatly exceeded, use an approved air-supplied respirator. For respirator use observe OSHA regulations (29CFR 1910.134) or use in accordance with applicable laws and regulations of your country or particular locality. Note: If the exposure limit for formaldehyde is exceeded, a formaldehyde-specific, formaldehyde/organic vapor combination, or airline respirator may be required.SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where splashing may occur.OTHER PROTECTIVE EQUIPMENT: Remove and wash contaminated clothing before reuse.HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Do not smoke in anychemical handling or storage area. Food or beverages should not be consumed anywhere this product is handled or stored. Wash thoroughly after handling.9. PHYSICAL AND CHEMICAL PROPERTIESTypical values, not to be used for specification purposes.ODOR: Mild VAPOR PRESSURE: N.D.APPEARANCE: Gray VAPOR DENSITY: Heavier than Air PHYSICAL STATE: Liquid LOWER EXPLOSIVE LIMIT: 1.6 %(V)FLASH POINT:≥ 201 °F, 93 °CUPPER EXPLOSIVE LIMIT: 13.8 %(V)Setaflash Closed CupBOILING RANGE: 100 - 120 °C EVAPORATION RATE: Slower than n-butyl-acetate AUTOIGNITION TEMPERATURE:N.D.DENSITY: 1.16 g/cm3 - 9.67 lb/gal DECOMPOSITION TEMPERATURE:N.D. VISCOSITY, DYNAMIC: ≥20 mPa.s @ 25 °C ODOR THRESHOLD: N.D.VISCOSITY, KINEMATIC: ≥17 mm2/s @ 25 °CSOLUBILITY IN H2O: Water Dispersible VOLATILE BY WEIGHT: 64.55 %pH: 6.5VOLATILE BY VOLUME: 75.28 %FREEZE POINT: 32 F VOC CALCULATED: 1.23 lb/gal, 148 g/l COEFFICIENT OF WATER/OILN.D. METHOD 24: 1.70 lb/gallonDISTRIBUTION:LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined10. STABILITY AND REACTIVITYHAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions. STABILITY: Product is stable under normal storage conditions.CONDITIONS TO AVOID: High temperatures. Sources of ignition.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.HAZARDOUS DECOMPOSITION PRODUCTS: May contain CO, CO2, oxides of nitrogen, oxides of sulfur, halogenated by-products, Metal oxides11. TOXICOLOGICAL INFORMATIONEXPOSURE PATH: Refer to section 2 of this SDS.SYMPTOMS:Refer to section 2 of this SDS.TOXICITY MEASURES:Chemical Name LD50/LC50Zinc compound Oral LD50: Rat> 5,000 mg/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/l Carbon black Oral LD50: Rat> 15,400 mg/kgDermal LD50: Rabbit> 3 g/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/l Propylene glycol monomethylether Oral LD50: Rat5,000 mg/kgDermal LD50: Rabbit13 g/kgGHS LC50 (vapour): Acute toxicity point estimate11 mg/l GHS LC50(dust and mist): Acute toxicity point estimate1.5 mg/l Inhalation LC50:Rat>7559 ppm/6 hNonylphenol ethoxylate compound N.D.Titanium dioxide Oral LD50: Rat> 10,000 mg/kgDermal LD50: rabbit> 5,000 mg/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/l Resorcinol Oral LD50: Rat202 mg/kgDermal LD50: Rabbit3,360 mg/kgInhalation LC50: Rat21.3 mg/l/1 hGerm cell mutagenicity: No classification proposedCarcinogenicity: No classification proposedReproductive toxicity: Category 1B - May damage fertility or the unborn child.Components contributing to classification: Methanol.12. ECOLOGICAL INFORMATIONECOTOXICITY:Chemical Name EcotoxicityZinc compound N.D.Carbon black N.D.Propylene glycol monomethylether Fish: Pimephales promelas20.8 g/l96 h StaticInvertebrates: Daphnia magna23,300 mg/l48 hNonylphenol ethoxylate compound N.D.Titanium dioxide N.D.Resorcinol Fish: Pimephales promelas36 - 100 mg/l96 h StaticPimephales promelas100 mg/l96 h flow-throughOncorhynchus mykiss> 100 mg/l96 h flow-throughPimephales promelas53.4 mg/l96 hInvertebrates: Daphnia magna78 mg/l48 hPERSISTENCE AND DEGRADABILITY:Not determined for this product. BIOACCUMULATIVE: Not determined for this product.MOBILITY IN SOIL: Not determined for this product.OTHER ADVERSE EFFECTS: Not determined for this product.13. DISPOSAL CONSIDERATIONSDISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and disposal facility.14. TRANSPORT INFORMATIONUS DOT RoadProper Shipping Name: Environmentally hazardous substances, liquid, n.o.s.Hazard Class: 9SECONDARY HAZARD: NoneUN/NA Number: 3082Packing Group: IIIEmergency Response Guide Number: 171For US DOT non-bulk road shipments this material may be classified as NOT REGULATED. For the mostaccurate shipping information, refer to your transportation/compliance department regarding changes inpackage size, mode of shipment or other regulatory descriptors.IATA CargoPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.Hazard Class: 9HAZARD CLASS: NoneUN NUMBER: 3082PACKING GROUP: IIIEMS: 9LIMDGPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.Hazard Class: 9HAZARD CLASS: NoneUN NUMBER: 3082PACKING GROUP: IIIEMS: F-AThe listed transportation classification applies to non-bulk shipments. It does not address regulatory variations due to changes in package size, mode of shipment or other regulatory descriptors. For the most accurate shipping information, refer to your transportation/compliance department.15. REGULATORY INFORMATIONU.S. FEDERAL REGULATIONS: AS FOLLOWS:SARA SECTION 313This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372.:Chemical Name CAS Number Weight % Less ThanZinc compound PROPRIETARY10.0%TOXIC SUBSTANCES CONTROL ACT:INVENTORY STATUSThe chemical substances in this product are on the TSCA Section 8 Inventory.EXPORT NOTIFICATIONThis product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States:None16. OTHER INFORMATIONUnder HazCom 2012 it is optional to continue using the HMIS rating system. It is important to ensure employees have been trained to recognize the different numeric ratings associated with the HazCom 2012 and HMIS schemes.HMIS RATINGS - HEALTH: 2* FLAMMABILITY: 1 PHYSICAL HAZARD: 0* - Indicates a chronic hazard; see Section 2Revision: Section 2, Section 11Effective Date: 08/21/2019DISCLAIMERThe information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations.。
GJB 150A,MIL-STD-810F军标对照表
测试项目国军标GJB 150A 美军标MIL-STD-810F 第2部分：低气压(高度)试验500.4Low Pressure (Altitude)第3部分：高温试验501.4High Temperature 第4部分：低温试验502.4Low Temperature 第5部分：温度冲击试验503.4Temperature Shock 第7部分：太阳辐射试验505.4Solar Radiation (Sunshine)第8部分：淋雨试验506.4Rain 第9部分：湿热试验507.4Humidity 第10部分：霉菌试验508.5Fungus 第11部分：盐雾试验509.4Salt Fog第12部分：砂尘试验510.4Sand and Dust第13部分：爆炸性大气试验511.4Explosive Atmosphere 第14部分：浸渍试验512.4Immersion第15部分：加速度试验513.5Acceleration第16部分：振动试验514.5Vibration 第17部分：噪声试验515.5Acoustic Noise 第18部分：冲击试验516.5Shock 第20部分：炮击振动试验519.5Gunfire Vibration 第21部分：风压试验第22部分：积冰/冰雨试验521.2Icing/Freezing Rain第23部分：倾斜和摇摆试验第24部分：温度--湿度--振动--高520.2Temperature, Humidity , Vibration, and Altitude第25部分：振动--噪声--温度试验523.2Vibro-Acoustic/Temperature 第26部分：流体污染试验504 Contamination by Fluids 第27部分：爆炸分离冲击试验517Pyroshock第28部分：酸性大气试验518Acidic Atmosphere 第29部分：弹道冲击试验522Ballistic Shock第30部分：舰船冲击试验试验目的在于确定装备在常温条件下能否：a耐受低气压环境；b在低气压环境下工作正常；c耐受空气压力快速变在于获取有关数据，以评价高温条件对装备的安全性，完整性和性能的影响。
UL810-1-中译
表 6.1
聚合绝缘材料
属性
阻燃性
电性能
介质
应用
最 小 可 燃 热线（HWI）b 强电流（HAI）b 击 穿 相比较的追
性等级 a
强度 b 踪 指 标
（CTI）b
最 大 性 能 水平 最大性能水平分 最 小 最大性能水
分类Байду номын сангаас
类
电压 平分类
相 关 的 绝 缘 的 V-0
*10.3.1 1998 年 8 月 24 日修订*
10.3.2 全部 3 个样品被测试，一个样品将被安装在下面的 3 个位置： a 电容的主轴垂直，接线端子在上端 b 电容的主轴水平，当电容是椭圆的，椭圆次轴水平 c 电容的主轴垂直，接线端子在下端
例外：使用保护方式而不是压敏中断的电容仅在位置 1 处测试
第一部分 电容 结构 4、 封装 4.1 一般说明 4.4.1 电容的带电部分应被封装，除了电源导线，端子或是放电电阻。
4.2 金属封装 4.2.1 如果是钢，金属封装的最小厚度为 0.010 英寸（0.25mm），如果是铝、黄铜、铜，
最小厚度为 0.016 英寸（0.41mm）。
4.3 非金属封装 4.3.1 聚合材料作为全部或部分封装材料应该符合聚合材料应用标准——UL 746C 电气
a 卷绕电容的抗吸湿完全被包封或是在包封在有同样作用的其他材料内 b 绝缘衬垫应具有 5000V 的耐压。在 90%的湿度下，10 兆欧-厘米电阻值符合电子设
备评估，UL764C 中聚合材料标准。 7 引线和端子 7.1 电容引线达到相关的电压和电流标准。电容导线绝缘额定温度不低于电容额定温度。 7.2 引线在电容内部的连接应可靠。拉力缓解应符合自恢复测试，9 部分 7.3 电容引线端子应由锡膏，压力端子连接器，线邦定螺纹，定位导线尺寸的快速连接端子
GJB150A讲解
1.9 试验项目发展趋势
试验项目超过810F范围 试验项目或程序增加，力图覆盖各行业 冲击试验中增加航天弹道冲击和爆炸分离冲 击试验程序、增加舰船用的冲击、摇摆和风 压试验项目 试验项目更完整和国际化，增加了酸性大气 和流体污染等欧洲标准中项目
2.2 格式区别对比说明 2.2.3 重视收集信息和应用(1)
编写试验大纲收集信息
• • • • • • • • • • 宜采用的试验设备和测量仪器 试件的标识、试验履历等有用信息 选定的试验程序及其次序 选定的试验条件（量值，时间） 试件的技术状态 所用传感器的数量和安装位置 试件和传感器的安装要求 负载和冷却措施 在试验室进行功能、性能检测时记录的结果 编写试验大纲
2、GJB 150A与GJB 150的区别
祝耀昌
航空综合环境重点实验室
Aero Combined Environment Laboratory
2.1 GJB150A与GJB150试验项目编写格式对比表(1)
章节 GJB150 GJB150A 章节 1 范围 说明该部分的内容 说明该部分适用的 装备对象
810F 通用实验室试验 方法指南 低气压（高度） 高温 低温 温度冲击 810F中取消
温度冲击试 验 6 取消
5
1.6 三个标准的试验项目对比(2)
GJB150 7 太阳辐射试验 7 GJB150A 太阳辐射 试验 505.4 810F 太阳辐射
8 9 10 11 12
淋雨试验 湿热试验 霉菌试验 盐雾试验 砂尘试验
8 9 10 11 12
淋雨试验 湿热试验 霉菌试验 盐雾试验 砂尘试验
506.4 507.4 508.5 509.4 510.4
KF8F204数据手册V1.0
17
I/O
T0CK
INT0
P0.1
AN1
18
I/O
ADVRIN
SPCLK
P0.0
19
I/O AN0
SPDAT
20
P VSS
KF8F204 数据手册 V1.0
双向输入输出端口 ADC 输入通道 8 双向输入输出端口 ADC 输入通道 6 外部中断 1 输入 双向输入输出端口 ADC 输入通道 5 双向输入输出端口 ADC 输入通道 4 PWM1 输出 带上拉和电平变化中断功能的双向输入输出端口 ADC 输入通道 2 T0 时钟输入 外部中断 0 输入 带上拉和电平变化中断功能的双向输入输出端口 ADC 输入通道 1 AD 外部参考电压输入 在线编程时钟输入 带上拉和电平变化中断功能的双向输入输出端口 ADC 输入通道 0 在线编程数据输入 地，0V 参考点
2.2.2 P1 口原理功能框图 .....................................................26 2.3 P2 口 .....................................................................27
2 I/O端口介绍 ............................................................... 17
2.1 P0 口 .....................................................................18 2.1.1 P0 口相关的寄存器 .....................................................19
APCH样本
直接式自然冷却系统
间接式自然冷却系统
5
i-MASTER 微处理控制系统
AIRFACT 功能强大的 I-MASTER 电脑控制系统控制机组的运行，它根据系统需求负荷的大小，启动/关闭压缩 机的运行，或使压缩机工作在一定的负荷输出下。电脑控制其监测每一个系统以及每一个压缩机的运行状态， 当机组发生故障时，关闭故障单元的运行。
冷媒与制冷回路
机组采用 R22 或 R134A 冷媒，每 一台机组具有两个独立的制冷回 路，他们包括了螺杆式制冷压缩 机、冷凝器、蒸发器、干燥过滤器、 具有湿度指示的视液镜、液体管路 电磁阀、电子膨胀阀等。机组在出 厂时已经经过了压力检验，并灌注 了冷媒。所有的低温管道都包有保 温隔热层。
3
带有自然冷却的 APCH-FD/FS 机组
AIRFACT 不断致力于为市场提供节 能、环保，以及高可靠性和低费用的 新技术和新产品。APCH 系列风冷冷 水机组及自然冷却机组专为 IT 和工 业制冷应用而设计
AIRFACT
1959 年，AIRFACT 创立于澳大利亚悉尼。它是澳大 利亚最早的本土制冷空调产品品牌。 创立以后的 AIRFACT，生产制造了大量的屋顶式空调 机组、分体式空调机组、风管式空调机组、整装式冷 水机组等。这些产品在澳大利亚制冷空调市场占据了 重要的地位。 2000 年悉尼奥运会，AIRFACT 和全球最大螺杆压缩 机制造商 BITZER 合作成为悉尼奥运会合作伙伴，再 次发挥了重要的作用，为大量的奥运会设施提供了高 质量的制冷空调设备。 2003 年，AIRFACT 在中国深圳建立了一个新的工厂， 并将业务范围从商用空调市场扩展到了新兴的 IT 领 域，为 IT 应用提供包括冷却系统和机架系统在内的 IT 物理基础设施产品。 今天，有着超过 50 年历史的 AIRFACT，继续不断创 新和探索新技术，为顾客提供节能、节省费用的高质 量产品。
制冷剂的分类及其用途
CFC
R507
R125/R143
-46.7
适合中低温冷冻
替代R22和R502
ODP为0
0HFC
R508A
KLEA TP5R3、KLEA 508
-85.7
超低温、深冷
替代R13R23R503
ODP为0
0HFC
R508B
三氟甲烷/六氟乙烷
CHF3/ C2F6
-87.4
超低温、深冷
替代R13、R23、R503
R22/ R142b/ R600a
-32.7
R500R12替代品
直接替代R12
ODP0.036（GWP）0.19
R407C
R32/R125/R134a（23%/25%/52%）
-43.7
替代R22
替代R22
ODP为0，GWP为1.526
HFC
R408A
R22、R125、R143a
-44.4
商用制冷设备及一些交通制冷设施
替代R22、R502
ODP为0，GWP0.01
HC
丁烷类
R600
正丁烷
C4H10
-0.5
冰箱、冰柜
爆炸极限1.85-8.5%
ODP为0，GWP 0.1
HC
R600a
异丁烷
(CH3)2CHCH3
-11.73
冰箱、冷柜
替代CFC-12
ODP为0，GWP0.1
HC
不
饱
和
烯
烃
乙烯
R1150
乙烯
C2H4
-103.9
替代R-502
无毒不可燃，ODP为0.013，GWP为2700
HCFC
Chemlok 81110釜炉胶水技术数据表说明书
Chemlok® 8110 Adhesive Technical Data SheetChemlok® 8110 adhesive is a one-coat, water-based adhesive that bonds nitrile (NBR) elastomers to metal during vulcanization. It is composed of a mixture of dispersed mineral fillers, organic compounds, resins and polymer latexes in an aqueous medium.With good resistance to hot oils and transmissionfluids, Chemlok 8110 adhesive is suitable for use in the manufacture of gaskets and seals such as shaft seals. It can also be used to bond polyacrylic elastomers to metal. Features and Benefits:Versatile – bonds a variety of NBR compounds and polyacrylic elastomers.Environmentally Preferred – uses water for dilution; provides reduced VOC emissions.Environmentally Resistant – provides good resistanceto high temperature fluid environments; excellent for use in gaskets or seals.Elastomers:• Nitrile (NBR)• Polyacrylate (ACM)Application:Surface Preparation – Thoroughly clean metal surfaces prior to application. Remove protective oils, cutting oilsand greases by solvent degreasing or alkaline cleaning. Remove rust, scale or oxide coatings by suitable chemical or mechanical cleaning methods.For further detailed information on surface preparation of specific substrates, refer to Chemlok Adhesives application guide.Mixing – Thoroughly mix adhesive before use. Do not shake. To prevent foaming, mechanical mixing should not exceed 30 rpm. The addition of anti-foaming agents is not recommended.If dilution needed, use deionized water at a ratio of 1:1, by volume. More dilute solutions can be used if necessary. Slowly add water while mixing.Applying – Apply adhesive by dip or spray methods. For best results, preheat the metal parts to 49-60°C (120-140°F) prior to spray application.Regardless of application method, the dry film thickness of Chemlok 8110 adhesive should be 5.1-10.2 micron (0.2-0.4 mil).Parker LORDEngineered Materials Group 111 LORD DriveCary, NC 27511-7923USAphone +1 877 ASK LORD (275 5673)Values stated in this document represent typical values as not all tests are run on each lot of material produced. For formalized product specifications for specific product end uses, contact the Customer Support Center.Information provided herein is based upon tests believed to be reliable. In as much as Parker LORD has no control over the manner in which others may use this information, it does not guarantee the results to be obtained. In addition, Parker LORD does not guarantee the performance of the product or the results obtained from the use of the product or this information where the product has been repackaged by any third party, including but not limited to any product end-user. Nor does the company make any express or implied warranty of merchantability or fitness for a particular purpose concerning the effects or results of such use.WARNING — USER RESPONSIBILITY . FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.©2021 Parker Hannifin - All Rights ReservedInformation and specifications subject to change without notice and without liability therefor. Trademarks used herein are the property of their respective owners.Chemlok 8110 Adhesive — Technical Data SheetOD DS3159 04/21 Rev.4Drying/Curing – Allow coated parts to air-dry for at least 60 minutes at room temperature prior to bonding. Drying can be accelerated by oven drying at 49-71°C (120-160°F).Chemlok 8110 adhesive cures during the rubber vulcanization process.Cleanup – Use soap and water to remove wet adhesive. Remove dried adhesive with solvents such as acetone, MEK or isopropyl alcohol.Shelf Life/Storage:Shelf life is six months from date of shipment when stored by the recipient in a well ventilated area at 21-27°C (70-80°F) in original, unopened container. Do not freeze product.Cautionary Information:Before using this or any Parker LORD product, refer to the Safety Data Sheet (SDS) and label for safe use and handling instructions.For industrial/commercial use only. Must be applied by trained personnel only. Not to be used in household applications. Not for consumer use.。
各种塑料的熔点和玻璃化温度
聚苯硫醚/PPS
285-290
88
Polypropylene
聚丙烯/PP
160-175
-20
Polystyrene
聚苯乙烯/PS
74-105
High Impact Polystyrene
高抗冲聚苯乙烯/HIPS
93-105
Polyvinyl chloride
聚氯乙烯/PVC
75-105
WM-15-762深圳安吉尔饮水产业集团有限公司外壳塑胶件（水壶）PP黑色（1531-64121）飞
聚对苯二甲酸乙二醇酯/PET
212-265
68-80
LowDensity?Polyethylene
低密度聚乙烯/LDPE
98-115
-25
High Density?Polyethylene
高密度聚乙烯/HDPE
130-137
Polyphenylene oxide,modified
聚苯醚/PPO
117-190
尼龙66/
Nylon6/6
255-265
Polyamide(Nylon Type12)
尼龙12/
Nylon12
160-209
125-155
Polycarbonate
聚碳酸酯/PC
150
Polybutylene terephthalate
聚对苯二甲酸丁二醇酯/PBT
220-267
Polyethylene terephthalate
各种塑料的熔点和玻璃化温度塑料材料名称中文名英文熔点玻璃化温简称度acrylonitrilebutadiene丙烯腈丁二烯88120styrene苯乙烯abspolyamidenylontype6尼龙6nylon6210220polyamidenylontype66尼龙66255265nylon66polyamidenylontype12尼龙12160209125155nylon12polycarbonatepolybutyleneterephthalatepolyethyleneterephthalatelowdensitypolyethylenehighdensitypolyethylene聚碳酸酯pc150聚对苯二甲酸丁220267二醇酯pbt聚对苯二甲酸乙2122656880二醇酯pet低密度聚乙烯2598115ldpe高密度聚乙烯130137hdpepolyphenyleneoxidemodifiedpolyphenylenesulfidepolypropylenepolystyrenehighimpactpolystyrene聚苯醚ppo117190聚苯硫醚pps28529088聚丙烯pp16017520聚苯乙烯ps74105高抗冲聚苯乙烯93105hipspolyvinylchloride聚氯乙烯pvc75105wm15762深圳安吉尔饮水产业集团有限公司外壳塑胶件水壶pp黑色153164121飞
一汽马自达配件报价系统4s价--联保网络.
G22C51P4038 G22C51P4064 G22C51P4066 G22C51P4087 G22C51P40A08 G22C51P40A10 G22C51P40A28 G22C51P40A33 G22C51P40A37 G22C51P40A66 G22C51P5001 G22C51P5008 G22C51P5010 G22C51P5021 G22C51P5028 G22C51P5033 G22C51P5037 G22C51P5038 G22C51P5064 G22C51P5066 G22C51P5087 G22C51P50A08 G22C51P50A10 G22C51P50A28 G22C51P50A33 G22C51P50A37 G22C51P50A66 BR5S51P40B08 BR5S51P40B11 BR5S51P40B67 BR5S51P40B91 BR5S51P40B96 BR5S51P50B08 BR5S51P50B11 BR5S51P50B67 BR5S51P50B91 BR5S51P50B96 C23651P40B11 C23651P40B67 C23651P40B82 C23651P40B85 C23651P40B91 C23651P40BPZ C23651P40C67 C23651P40C82 C23651P40C85 C23651P40C91 C23651P40CPZ C23651P50B11 C23651P50B67 C23651P50B82 C23651P50B85 C23651P50B91 C23651P50BPZ
编号备件名称4s市场f18932982转向盘本体21861858bs1a70201a右侧围外板21801853bs1a71201左侧围外板21801853bs1a70201右侧围外板21801853c31751170d21791852c31751170e21791852c31751180d21791852c31751180e2179185249f018904适配器21751849fey5675d2a无钥匙控制单元21741848br9g67070e发动机线束总成21651840br9g67070f发动机线束总成21651840bs1c6701021631839gap466960低音扬声器21611837bcn254200b左纵梁总成21601836bcn254200c左纵梁总成2160183650nst0005快修小车21531830g22e50221eaa后保险杠面罩21511829g22e50221ebb后保险杠面罩2151182949n019002机座21471825g31t882115621461824gj5e88211a0221461824gj5e88211a8021461824gf092252021461824gf09226202146182450bjh2733气动焊点削钻机21451823bs1a53200d右纵梁总成21451823cg1560420仪表板金属支架总成21401819bn8d46100e换档杆底座总成2137181650nst0002工位工作台21311811bs1a57k5021261807cg428831034第三排座椅右坐垫21251806cg42883603421251806cg438831034第三排座椅右坐垫21251806cg43883603421251806ce408833034第三排座椅右侧靠背针织21231805ce408838034第三排座椅左侧靠背针织21231805ce4088380a3421231805bcn254200左纵梁总成21201802bcn254200a左纵梁总成21201802bcy25320xa右纵梁总成21201802bpy053810e右后边梁总成21201802bbm461l20a空调压缩机皮带轮21161799bp4s61l20空调压缩机皮带轮21161799fe8169840天窗滑动框架21151798ff2369840天窗滑动
典型结构振动-加速度综合环境试验研究
典型结构振动-加速度综合环境试验研究周桐;张志旭;任万发;邓志刚【摘要】目的：研究多种典型结构在振动－加速度综合环境下的响应规律，证明开展振动－加速度综合环境试验的必要性。
方法采用试验研究的方法，对比单一振动环境和振动－加速度综合环境下典型结构响应特征的差异。
结果试验结果表明，振动－加速度综合环境下结构表现出的响应特征可能会与单一振动环境下的完全不同。
结论振动－加速度综合环境更加接近产品的真实使用环境，综合环境试验能够发现单一环境无法暴露的问题，在产品研制中的作用无可替代。
%ABSTRACT:Objective To study the dynamic response of typical structure under vibration-acceleration combined environment and demonstrate the necessity of experiments in the vibration-acceleration combined environment. Methods The difference in the dynamic response of typical structure under single vibration environment and vibration-acceleration combined environment was studied by experiment. Results The dynamic response under vibration-acceleration combined environment may be totally different from those under single vibration environment. Conclusion Vibration-acceleration combined environment could simulate the actual environment more realistically than single environment. Some special problems could only be exposed under combined environment test instead of single environment. As to its special significance, the combined environment test could not be replaced by other tests.【期刊名称】《装备环境工程》【年(卷),期】2015(000)005【总页数】6页(P50-55)【关键词】振动;加速度;综合环境【作者】周桐;张志旭;任万发;邓志刚【作者单位】中国工程物理研究院总体工程研究所，四川绵阳 621999;中国工程物理研究院总体工程研究所，四川绵阳 621999;中国工程物理研究院总体工程研究所，四川绵阳 621999;中国工程物理研究院总体工程研究所，四川绵阳621999【正文语种】中文【中图分类】TJ05;V416振动环境和加速度环境是许多武器装备尤其是飞行器都将经历的环境，为了确保装备在此类环境下结构的完整性和功能的可靠性，研究人员开展了大量的地面单一环境振动试验和单一环境加速度试验，在装备研制中发挥了重要作用。
FOXBORO I A Series HARDWARE产品规格说明书
FOXBORO ®The FBM214 HART ® Communication Input Interface Module provides eight input channels, each accepting a 4 to 20mA analog signal or a digital HART signal superimposed on a 4 to 20 mA analog input signal.FEATURESKey features of the FBM214 module are:Eight analog input channels, each accepting oneof the following inputs:•Standard 4 to 20 mA analog sensor signal •Digital HART Frequency Shift Keying (FSK) signal superimposed on a 4 to 20 mA analog input signal.FSK modem dedicated to each input channel forbi-directional digital communications with a HART field deviceAnalog to digital conversion of each of the 4to20mA input signals from the HART devicesSupport for the HART universal commandsnecessary to interface the field device with the I/A Series ® system databaseGalvanic isolation of the group of 8 inputchannels from ground and module logicCompact, rugged design suitable for enclosure inClass G3 (harsh) environmentsHigh accuracy achieved by sigma-delta dataconversions for each channelTermination Assemblies (TAs) for locally orremotely connecting field wiring to the FBM214Termination Assemblies for per channel internallyand/or externally loop powered transmitters.PSS 21H-2Z14 B4 Page 2OVERVIEWThe FBM214 HART Communication Input Interface Module contains eight 4to20mA group isolated analog input channels. The FBM214 supports any mix of standard 4to20mA devices and HART devices.The FBM214 serves as a HART communications field device host, enabling the I/A Series system to request and receive two digital messages per second from the field device. The message pass-through capability can be used to support HART universal, common practice, and device-specific commands, but not the burst communication mode. These commands are implemented using the Intelligent Field Device Configurator (IFDC — refer toPSS 21S-8A3 B3 for details).The FBM214 provides a common isolated power supply to power all eight channels. Optionally, the channels can be powered by an external power supply. However, when a common external power supply is used with two or more channels, a Cable Balun module is required to prevent channel cross talk.COMPACT DESIGNThe FBM214 has a compact design, with a rugged extruded aluminum exterior for physical protection of the circuits. Enclosures specially designed for mounting the FBMs provide various levels of environmental protection, up to harsh environments per ISA Standard S71.04.HIGH ACCURACYFor high accuracy, the module incorporates a Sigma-Delta converter which can provide new analog input values for each channel every 100 milliseconds.VISUAL INDICATORSLight-emitting diodes (LEDs) incorporated into the front of the module provide visual indication of the module’s operational status, and communication activity on the channels.EASY REMOVAL/REPLACEMENTThe module can be removed/replaced without removing field device termination cabling, power, or communications cabling.FIELDBUS COMMUNICATIONA Fieldbus Communication Module or a Control Processor interfaces the redundant 2 Mbps module Fieldbus used by the FBMs. The FBM214 module accepts communication from either path (A or B) of the redundant 2 Mbps fieldbus – should one path fail or be switched at the system level, the module continues communication over the active path.The use of an external power supply common to two or more loops requires a Cable Balun Module to maintain communication signal line balance.MODULAR BASEPLATE MOUNTINGThe module mounts on a modular baseplate which accommodates up to four or eight FBMs. The modular baseplate is either DIN rail mounted or rack mounted, and includes signal connectors for redundant fieldbus, redundant independent dc power, and termination cables.TERMINATION ASSEMBLIESField input signals connect to the FBM subsystem via DIN rail mounted TAs. The TAs used with theFBM214 are described in “TERMINATION ASSEMBLIES AND CABLES” on page8.PSS 21H-2Z14 B4Page 3CABLE BALUN MODULEThe Cable Balun module is used to maintain digital communication line balance for HART Transmitter to FBM loops that are powered from a common external power supply. This powering effectively connects one line of each loop together. Without the Baluns, in each loop so powered, the common connection at the external power supply, would cause near end crosstalk at the system end of the loop wiring cable. Loops using FBM internal power source do not require Baluns.The Cable Balun module contains multiple Baluns. One Balun segment is interconnected in each loop powered from an external power supply per the diagram above. There is one Cable Balun module.Figure 1. Cable Balun Module Cable Balun ModuleModule Model ModulePart No.No. of Balunsin the ModuleCBM-4P0903SV4PSS 21H-2Z14 B4Page 4FUNCTIONAL SPECIFICATIONSField Device ChannelsVERSION SUPPORTEDHART Protocol v6INTERFACE8 group-isolated channelsCOMMUNICATION TO THE DEVICEPoint-to-point, master/slave, asynchronous, half-duplex, at 1200 baud.ERROR CHECKINGParity on each byte, and one CRC check byte.SPEED2 messages per secondFASTEST ALLOWED ECB BLOCK PERIOD500 msecMAXIMUM DISTANCE (FBM214 TO FIELDDEVICE)Meets HART FSK physical layer specificationHCF_SPEC-54, Revision 8.1 [up to 3030 m(10000ft)](1).COMPLIANCE VOLTAGE18 V dc minimum at 20.5 mACURRENT INPUTSSense Resistor61.9 Ω nominalTotal Input Resistance280 Ω minimumAccuracy (Includes Nonlinearity)±0.03% of full scaleTemperature Coefficient50 ppm/ºCResolution15 bitsUpdate Rate100 msIntegration Time500 msCommon Mode Rejection>100 db at 50 or 60 HzNormal Mode Rejection>35 db at 50 or 60 HzMAXIMUM LOOP RESISTANCE280 Ω (not including the field device)(2)LOOP POWER SUPPLY PROTECTIONEach channel is galvanically group isolated,current limited and voltage regulated. All inputsare limited by their design to less than 30 mA. Ifthe current limit circuit shorts out, the current islimited to about 85 mA.FBM INPUT IMPEDANCE280 Ω minimumFBM INTERNAL POWER FOR FIELD DEVICE24 V dc ±10% common power supply for allchannels. Loop load limited to one device perchannel.ISOLATIONThe channels are not galvanically isolated fromeach other, but are galvanically isolated (bothoptical and transformer isolation) as a group from ground and module logic. Inputs use an internal FBM isolated power supply for field power. Themodule withstands, without damage, a potential of 600 V ac applied for one minute between the group-isolated channels and earth (ground).CAUTIONThis does not imply that these channels areintended for permanent connection tovoltages of these levels. Exceeding the limitsfor input voltages, as stated elsewhere in thisspecification, violates electrical safety codesand may expose users to electric shock. Fieldbus CommunicationCommunicates with its associated FCM or FCP via the redundant 2 Mbps module FieldbusHEAT DISSIPATION4 W (maximum)(1)The maximum allowable distance decreases when the loop is operated through an intrinsic safety barrier. The maximum distance ofthe field device from the FBM is a function of compliance voltage, wire gauge and voltage drop at the device.(2)In an intrinsic safety application, if a zener barrier is used between the FBM and the field device, the power supply must be set at24V dc +5%, -1%. There are no specific constraints with the use of galvanic barriers.PSS 21H-2Z14 B4Page 5 FUNCTIONAL SPECIFICATIONS (CONTINUED)Power RequirementsINPUT VOLTAGE RANGE (REDUNDANT)24V dc ±5%CONSUMPTION7 W (maximum)Regulatory ComplianceELECTROMAGNETIC COMPATIBILITY (EMC) European EMC Directive 89/336/EECMeets:EN 50081-2 Emission standardEN 50082-2 Immunity standardEN 61326 Annex A (Industrial Levels) CISPR 11, Industrial Scientific and Medical(ISM) Radio-frequency Equipment -Electromagnetic Disturbance Characteristics- Limits and Methods of MeasurementMeets Class A LimitsIEC 61000-4-2 ESD ImmunityContact 4 kV, air 8 kVIEC 61000-4-3 Radiated Field Immunity10 V/m at 80 to 1000 MHzIEC 61000-4-4 Electrical FastTransient/Burst Immunity2 kV on I/O, dc power and communicationlinesIEC 61000-4-5 Surge Immunity2kV on ac and dc power lines; 1kV on I/Oand communications linesIEC 61000-4-6 Immunity to ConductedDisturbances Induced by Radio frequencyFields10 V (rms) at 150 kHz to 80 MHz on I/O,dc power and communication linesIEC 61000-4-8 Power Frequency MagneticField Immunity30 A/m at 50 and 60 HzPRODUCT SAFETY (FBM AND CABLE BALUN) Underwriters Laboratories (UL) for U.S. andCanadaUL/UL-C listed as suitable for use inUL/UL-C listed Class I, Groups A-D;Division 2; temperature code T4 enclosurebased systems. These modules are also ULand UL-C listed as associated apparatus forsupplying non-incendive communicationcircuits for Class I, Groups A-D hazardouslocations when connected to specifiedI/A Series® processor modules as describedin the I/A Series DIN Rail MountedSubsystem User’s Guide (B0400FA). Wherepower is supplied by the FBM,communications circuits also meet therequirements for Class2 as defined inArticle725 of the National Electrical Code(NFPA No.70) and Section 16 of theCanadian Electrical Code (CSA C22.1).Conditions for use are as specified in theI/A Series DIN Rail Mounted SubsystemUser’s Guide (B0400FA).European Low Voltage Directive 73/23/EECand Explosive Atmospheres (ATEX) directive94/9/ECCENELEC (DEMKO) certified as EEx nA IICT4 for use in CENELEC certified Zone 2enclosure certified as associated apparatusfor supplying non-incendive field circuits forZone 2, Group IIC, potentially explosiveatmospheres when connected to specifiedI/A Series processor modules as describedin the I/A Series DIN Rail MountedSubsystem User’s Guide (B0400FA). Also,see Table1 on page9.Calibration RequirementsCalibration of the module or termination assembly is not required.PSS 21H-2Z14 B4Page 6ENVIRONMENTAL SPECIFICATIONS(3)OperatingTEMPERATUREModule-20 to +70°C (-4 to +158°F)Termination AssemblyPVC-20 to +50°C (-4 to +122°F)PA-20 to +70°C (-4 to +158°F) RELATIVE HUMIDITY5 to 95% (noncondensing)ALTITUDE-300 to +3,000m (-1,000 to +10,000ft)StorageTEMPERATURE-40 to +70°C (-40 to +158°F)RELATIVE HUMIDITY5 to 95% (noncondensing)ALTITUDE-300 to +12,000m (-1,000 to +40,000ft) ContaminationSuitable for use in Class G3 (Harsh) environments as defined in ISA Standard S71.04, based on exposure testing according to EIA Standard 364-65, Class III. Vibration7.5 m/S2 (0.75 g) from 5 to 500 Hz(3)The environmental limits of this module may be enhanced by the type of enclosure containing the module. Refer to the applicableProduct Specification Sheet (PSS) which describes the specific type of enclosure that is to be used.PSS 21H-2Z14 B4Page 7 PHYSICAL SPECIFICATIONSMountingMODULEFBM214 mounts on a modular baseplate. Thebaseplate can be mounted on a DIN rail(horizontally or vertically), or horizontally on a19-inch rack using a mounting kit. Refer toPSS21H-2W6B4 for details.TERMINATION ASSEMBLYThe TA mounts on a DIN rail and accommodates multiple DIN rail styles including 32mm (1.26in) and 35mm 1.38in).MassMODULE284 g (10 oz) approximateTERMINATION ASSEMBLYCompression181 g (0.40 lb) approximateRing Lug249 g (0.55 lb) approximateDimensions – ModuleHEIGHT102 mm (4 in)114 mm (4.5 in) including mounting lugsWIDTH45 mm (1.75 in)DEPTH104 mm (4.11 in)Dimensions – Termination AssemblySee page10.Part NumbersFBM214 MODULEP0922VTTERMINATION ASSEMBLIESSee “FUNCTIONAL SPECIFICATIONS –TERMINATION ASSEMBLIES” on page8. Termination CablesCABLE LENGTHSUp to 30 m (98 ft)CABLE MATERIALSPolyurethane or Hypalon®/XLPTERMINATION CABLE TYPEType 1 – See Table2 on page9.CABLE CONNECTION – TA25-pin male D-subminiatureConstruction – Termination AssemblyMATERIALPolyvinyl Chloride (PVC), compressionPolyamide (PA), compressionPVC, ring lugFAMILY GROUP COLORGreen – communicationTERMINAL BLOCKS3 tiers, 8 positionsField Termination ConnectionsCOMPRESSION-TYPE ACCEPTED WIRINGSIZESSolid/Stranded/AWG0.2 to 4 mm2/0.2 to 2.5 mm2/24 to 12 AWGStranded with Ferrules0.2 to 2.5 mm2 with or without plastic collarRING-LUG TYPE ACCEPTED WIRING SIZES#6 size connectors (0.375 in (9.5 mm))0.5 to 4 mm2/22 AWG to 12 AWGPSS 21H-2Z14 B4Page 8TERMINATION ASSEMBLIES AND CABLESField input signals connect to the FBM subsystem via DIN rail mounted Termination Assemblies, which are electrically passive.TAs for the FBM214 are available in the following forms: Compression screw type using Polyvinyl Chloride(PVC) materialCompression screw type using Polyamide (PA) material Ring lug type using PVC material.See the following “FUNCTIONAL SPECIFICATIONS –TERMINATION ASSEMBLIES” for a list of TAs used with the FBM214.The FBM214 provides sufficient loop resistance to allow use of the HART Hand-Held Terminal, or PC20 Intelligent Field Device Configurator (PSS 2A-1Z3 E).A removable termination cable connects the DIN railmounted TA to the FBM via a field connector on the baseplate in which the FBM is installed. Termination cables are available in the following materials: PolyurethaneHypalon XLP .Termination cables are available in a variety of lengths, up to 30 meters (98feet), allowing the Termination Assembly to be mounted in either theenclosure or in an adjacent enclosure. See Table 2 for a list of termination cables used with the TAs forthe FBM214.FUNCTIONAL SPECIFICATIONS – TERMINATION ASSEMBLIESFBM Type Input SignalTA Part NumberTermination TA Cable TACertification PVC (a)(a)PVC is polyvinyl chloride rated from -20 to +50°C (-4 to +122°F).PA is Polyamide rated from -20 to +70°C (-4 to +158°F).PA (a)Type (b)(b) C = TA with compression terminals; RL = TA with ring lug terminals.Type (c)(c)See Table 2 for cable part numbers and specifications.Type (d)(d)See Table 1 for Termination Assembly certification definitions.FBM2148 input channels, 4 to 20mA analog signal, alone or with HART signal superimposedP0916BX P0926EA P0926TD CRL11, 2PSS 21H-2Z14 B4Page 9Table 1. Certification for Termination AssembliesType Certification (a)(a)All TAs are UL/UL-C listed to comply with applicable ordinary location safety standards for fire and shock hazards. Hazardous locationtypes comply with ATEX directive for II 3 G use. They also comply with the requirements of the European Low Voltage Directive. All listings/certifications require installation and use within the constraints specified in DIN Rail Mounted Subsystem User’s Guide (B0400FA) and the conditions stated in UL and DEMKO reports.Type 1TAs are UL/UL-C listed as suitable for use in Class I; Groups A-D; Division 2 temperature code T4 hazardous locations. They are CENELEC (DEMKO) certified EEx nA IIC T4 for use in Zone 2 potentially explosive atmospheres.Type 2TAs are UL/UL-C listed as associated apparatus for supplying non-incendive field circuits Class I; Groups A-D; Division 2 hazardous locations when connected to specified DIN rail mounted FBMs and field circuits meeting entity parameter constraints specified in DIN Rail Mounted Subsystem User’s Guide (B0400FA). They are also CENELEC (DEMKO) certified as associated apparatus for supplying field circuits for Group IIC, Zone 2 potentially explosive atmospheres. Field circuits are also Class 2 limited energy (60 V dc, 30 V ac, 100 VA or less) if customer-supplied equipment meets Class 2 limits.Table 2. Cables Types and Part NumbersCable Lengthm (ft) Type 1P/PVC (a)Type 1H/XLPE (b)Cable Lengthm (ft) Type 1P/PVC (a)Type 1H/XLPE (b)0.5 (1.6)P0916DA P0916VA 10.0 (32.8) P0916DE P0916VE 1.0 (3.2) P0916DB P0916VB 15.0 (49.2) P0916DF P0916VF 2.0 (6.6)P0931RM P0931RR 20.0 (65.6) P0916DG P0916VG 3.0 (9.8) P0916DC P0916VC 25.0 (82.0) P0916DH P0916VH 5.0 (16.4)P0916DDP0916VD30.0 (98.4)P0916DJP0916VJ(a)P/PVC is polyurethane outer jacket and semi-rigid PVC primary conductor insulation.(b)H/XLPE is Hypalon outer jacket and XLPE (cross-linked polyethylene) primary conductor insulation.PSS 21H-2Z14 B4Page 10DIMENSIONS – NOMINALRELATED PRODUCT SPECIFICATION SHEETSCompression Termination AssemblyRing Lug Termination Assembly(a) Overall width – for determining DIN rail loading.(b) Height above DIN rail (add to DIN rail height for total).PSS NumberDescriptionPSS 21H-2W1 B3DIN Rail Mounted FBM Subsystem OverviewPSS 21H-2W2 B3DIN Rail Mounted FBM Equipment, Agency CertificationsPSS 21H-2Z14 B4Page 11PSS 21H-2Z14 B4 Page 12IPS Corporate Headquarters 5601 Granite Parkway Suite 1000 Plano, TX 75024United States of AmericaFoxboro Global Client Support Inside U.S.: 1-866-746-6477 Outside U.S.: 1-508-549-2424 or contact your local Foxboro representative.Facsimile: 1-508-549-4999Invensys, Foxboro, I/A Series and the IPS Logo are trademarks of Invensys plc, its subsidiaries, and affiliates. All other brand names may be trademarks of their respective owners.Copyright 2002-2010 Invensys Systems, Inc.All rights reservedMB 21A Printed in U.S.A. 0210。
橡胶百科_二十五_
世 界 橡 胶 工 业 World Rubber Industry
Vol. 37 No. 4 ：46 ～ 50 Apr. 2010
各种化学装置 、 半导体 优异而被广泛用于汽车 、 生产设备和通用机械等领域 。 氟橡胶的耐 热 性 、 耐化学药品性良好的主 要原因是： ① C － F 键 的 键 能 比 C — H 键 的 键 能高， 同 时， 还 强 化 了 其 他 C—C 键 和 C—H
氟橡胶的交联特征
多元醇交联 过氧化物交联（ 碘类） 橡胶分子末端或悬挂着的碘基 与聚合物组成无关
橡胶分子内双键 （ 由脱 HFP 反应生成） 与 VdF 共聚量有关
芳族类二元醇 * 盐
* 3 6
2
有机过氧化物 *
4 5
无需多官能不饱和化合物 *
需要 *
170 ° C × 10 min 230° C × 24 h 脱模性 、 耐热性 、 抗压缩永久变形性
橡胶及胶乳 。 此外 ， 还概要论述了交联剂和交联方 法 ， 补 强 材 料 以 及 各 种 配 合 剂， 对全面了解橡胶材料 的方方面面很有帮助 。 关键词 ： 原料橡胶 ； 交联剂 ； 补强 ； 配合剂 文献标识码 ： E 8232 （ 2010 ） 04004605 文章编号 ：1671中图分类号 ： TQ 332 ； TQ 333
6 1
它是非结晶的， 故可引入六氟丙烯（ HFP ） 。 这种 VdF-HFP 类氟 橡 胶 是 一 种 耐 热 性 、 耐化学药品 耐油性 、 力学强度优异而最常使用的氟橡胶 。 性、 VdF-HFP 类氟橡胶 主 要 采 用 多 元 胺 、 多元 醇和过氧化物进行交联 。 交联体系的特征见表 3228 所示 。
GJB150A,MIL-STD-810F军标对照表
GJB150A,MIL-STD-810F军标对照表GJB 150A,MIL-STD-810F军标测试项目对照表测试项目国军标GJB 150A第2部分：低气压(高度)试验第3部分：高温试验第4部分：低温试验第5部分：温度冲击试验美军标MIL-STD-810F500.4Low Pressure (Altitude)501.4High Temperature502.4Low Temperature503.4Temperature Shock第7部分：太阳辐射试验第8部分：淋雨试验第9部分：湿热试验第10部分：霉菌试验第11部分：盐雾试验505.4Solar Radiation (Sunshine)506.4Rain507.4Humidity 508.5Fungus509.4Salt Fog 第12部分：砂尘试验510.4Sand and Dust第13部分：爆炸性大气试验第14部分：浸渍试验511.4Explosive Atmosphere512.4Immersion第15部分：加速度试验513.5Acceleration第16部分：振动试验第17部分：噪声试验第18部分：冲击试验第20部分：炮击振动试验第21部分：风压试验第22部分：积冰/冰雨试验第23部分：倾斜和摇摆试验514.5Vibration515.5Acoustic Noise516.5Shock519.5Gunfire Vibration521.2Icing/Freezing Rain 520.2Temperature, Humidity第24部分：温度--湿度--振动--高, Vibration, and Altitude第25部分：振动--噪声--温度试验523.2Vibro-Acoustic/Temperature第26部分：流体污染试验第28部分：酸性大气试验第29部分：弹道冲击试验504 Contamination by Fluids518Acidic Atmosphere522Ballistic Shock第27部分：爆炸分离冲击试验517PyroshockGJB 150A,MIL-STD-810F军标测试项目对照表第30部分：舰船冲击试验GJB 150A,MIL-STD-810F军标测试项目对照表试验目的在于确定装备在常温条件下能否：a耐受低气压环境；b在低气压环境下工作正常；c耐受空气压力快速变在于获取有关数据，以评价高温条件对装备的安全性，完整性和性能的影响。
中英文安装说明书20111年_FCC_
Enclosure Climate Control Unit工业控制柜制冷机Assembly Instructions安装说明书（FCC系列）雷子克（广州）电气设备有限公司 Let Us Take You To The Top...3.3顶装按照开孔图开孔, 再锁紧制冷机底部内置的螺丝孔保证制冷机与控制柜的固定与密封。
4．安全与注意安全提示¾制冷机为精密电气，搬运务必轻放，严禁倒置，倾斜存放。
¾安装制冷机前，应该先取开外壳，（松开制冷机顶部的螺丝，由下向上垂直推卸外壳），把制冷机安装上控制柜后再把外壳装上制冷机（靠紧制冷机四周边框，由上向下卡入钩环，再拧紧制冷机顶部的两粒螺钉）¾因制冷机为无冷凝水设计，制冷机的出水管只为安全备份使用，正常使用时无水导出，不必考虑冷凝水的处理。
注意事项¾制冷机在灰尘大，或油性，毛绒的环境务必及时清理过滤网，否则会影响制冷机性能。
¾制冷机入风口需安装到控制柜体的上部。
¾控制柜外的温度不能超过55摄氏度，但短暂的高温并不影响制冷机运作。
¾包装应完好，如果发现制冷机有油渍，极有可能是泄漏制冷剂，包装的任何损坏都有可能引起制冷机的故障。
¾控制柜必须达到IP54，如果控制柜有漏洞或缝隙，冷凝水可能会发生。
¾制冷机之间或制冷机与墙壁距离至少不小于200mm¾在控制柜内部，制冷机入风和出风口不可有障碍物阻塞。
¾制冷机需水平安装、使用，最大倾斜角度不大于2°¾维护及送电必须由专业人员操作。
¾为避免冷凝物的形成，建议采用门位开关，保证当控制柜门打开时，制冷机必须关闭。
¾控制柜内部的电气元件的热释放不能超过制冷机可用制冷功率，否则会出现制冷机长期运作。
¾不可用任何方式修改制冷机。
5．电气联接电压与频率必须与制冷机的铭牌相匹配，在制冷机电气联接前端不可有其他的温度控制，制冷机上回路电保护元件应与制冷机额定功率相吻合，在安装时参考相关说明。
Windows——ClsId及其使用
ClsId及其使用2019年11月2日什么是ClsId?Clsid，先得说下GUID，它是Globally Unique Identifier的简称，中文翻译为“全球唯一标示符”,在Windows系统中也称之为Class ID，缩写为CLSID。
对于不同的应用程序，文件类型，OLE对象，特殊文件夹以及各种系统组件，Windows都会分配一个唯一表示它的ID代码。
ID是英文IDentity的缩写,ID是身份标识号码的意思,就是一个序列号，也叫帐号，是一个编码，而且是唯一的。
常见组件或程序类对应的clsId计算机中有各种个样的设备类型、内置程序、格式类型等采用了固定的GUID，所有电脑上安装的Windows系统都一样。
微软用固定的GUID 来标识，这对实际编程是有很大关系的，用错了会麻烦，列举一些：1394 Host Bus ControllerClass = 1394ClassGuid = {6bdd1fc1-810f-11d0-bec7-08002be2092f}This class includes system-supplied drivers of 1394 host controllers connected on a PCI bus, but not drivers of 1394 perip herals.Battery DevicesClass = BatteryClassGuid = {72631e54-78a4-11d0-bcf7-00aa00b7b32a}This class includes drivers of battery devices and UPSes.CD-ROM DrivesClass = CDROMClassGuid = {4d36e965-e325-11ce-bfc1-08002be10318}This class includes drivers of CD-ROM drives, including SCSI CD-ROM drives. By default, the system's CD-ROM class install er also installs a system-supplied CD audio driver and CD-ROM changer driver as PnP filters.我的电脑 {20D04FE0-3AEA-1069-A2D8-08002B30309D}我的文档 {450D8FBA-AD25-11D0-98A8-0800361B1103}拨号网络 {992CFFA0-F557-101A-88EC-00DD010CCC48}控制面板 {21EC2020-3AEA-1069-A2DD-08002B30309D}计划任务 {D6277990-4C6A-11CF-8D87-00AA0060F5BF}打印机 {2227A280-3AEA-1069-A2DE-08002B30309D}记事本 {1FBA04EE-3024-11D2-8F1F-0000F87ABD16}网络邻居 {208D2C60-3AEA-1069-A2D7-08002B30309D}回收站 {645FF040-5081-101B-9F08-00AA002F954E}公文包 {85BBD920-42A0-1069-A2E4-08002B30309D}Web 文件夹 {BDEADF00-C265-11d0-BCED-00A0C90AB50F}搜索-计算机{1f4de370-d627-11d1-ba4f-00a0c91eedba}文件.{00020c01-0000-0000-c000-000000000046}无关联文件文件名.{00021401-0000-0000-c000-000000000046} BMP文件文件名.{d3e34b21-9d75-101a-8c3d-00aa001a1652} HTML文件文件名.{25336920-03f9-11cf-8fd0-00aa00686f13}媒体剪辑文件文件名.{00022601-0000-0000-c000-000000000046}收藏夹文件名.{1a9ba3a0-143a-11cf-8350-444553540000} excel.{00020810-0000-0000-C000-000000000046}word.{00020900-0000-0000-C000-000000000046}更多clsid，去注册表“HKEY_CLASSES_R OOT\CLSID”下查看。