CR20101J30B中文资料
Q130B说明书J10IL1 Series Simplified Chinese
序言Copyright 2008版权所有、翻印必究本文件的信息如有关于可靠性、设计和功能提高方面的改变，恕不另行通知，本文件的信息并不表示制造商方面的承诺。
制造商绝不就因使用或不能使用本产品或文件所发生直接的、间接的、特殊的、意外的或因此导致的损害而承担赔偿责任，即使事先被告知该损害发生的可能性。
本文件包含受版权保护的所有权信息。
版权所有。
未经制造商的书面许可，严禁以任何形式，或通过任何机械、电子或其它方法，复制本手册中的任何部分。
声明虽然本手册努力做到准确无误，但制造商和分销商对因本手册的错误或疏忽，或因使用本手册中包含的信息而导致的损失不承担赔偿责任。
i目录在您开始前-------------------------------------------------------------------2本手册使用说明---------------------------------------------------------------2安全预防措施------------------------------------------------------------------2在您开始使用电脑前必须要熟记的事项---------------------------------5合适的工作位置---------------------------------------------------------------5介紹----------------------------------------------------------------------------7準備您的电脑------------------------------------------------------------------7熟悉您的电脑------------------------------------------------------------------8开始---------------------------------------------------------------------------14连接电源-----------------------------------------------------------------------14开启笔记本电脑--------------------------------------------------------------15利用电池的电量操作电脑--------------------------------------------------15使用笔记本电脑------------------------------------------------------------18 LCD屏幕的显示-------------------------------------------------------------18功能键（快速键）-----------------------------------------------------------19触控面板-----------------------------------------------------------------------20连接外接的磁道装置--------------------------------------------------------20省电模式-----------------------------------------------------------------------21重新设定系统-----------------------------------------------------------------23使用 Windows----------------------------------------------------------------23网络连接---------------------------------------------------------------------29使用无线局域网连接到互联网--------------------------------------------29使用有线局域网连接互联网-----------------------------------------------30运行BIOS设置------------------------------------------------------------32进入次选单--------------------------------------------------------------------33一般辅助说明-----------------------------------------------------------------33系统恢复-----------------------------------------------------------------------38 VGA 公用程序-------------------------------------------------------------42 3G 连接----------------------------------------------------------------------48疑难排解---------------------------------------------------------------------52音频问题-----------------------------------------------------------------------53硬盘问题-----------------------------------------------------------------------53显示问题-----------------------------------------------------------------------54ii键盘和鼠标问题--------------------------------------------------------------55 CMOS电池问题--------------------------------------------------------------55内存问题-----------------------------------------------------------------------56 PC卡问题---------------------------------------------------------------------56性能问题-----------------------------------------------------------------------57 USB2.0问题-------------------------------------------------------------------57規格---------------------------------------------------------------------------59iii注意事项交通委员会射频干扰声明经测试本设备符合“FCC 规则”第 15 部分中 B 类数字设备的限制。
2010c5说明书(3篇)
第1篇一、概述2010C5型多功能电动工具是一款集多种功能于一体的电动工具，适用于家居装修、工业生产、户外活动等多种场合。
本产品采用先进的制造工艺，具有结构紧凑、操作简便、性能稳定、安全可靠等特点。
二、产品规格1. 电压：220V2. 频率：50Hz3. 功率：500W4. 电池类型：锂电池5. 充电时间：约3小时6. 工作时间：约30分钟7. 尺寸：长×宽×高（mm）：250×100×508. 重量：约2kg三、产品特点1. 多功能设计：2010C5型电动工具集电钻、电锯、电磨、电刨等多种功能于一体，满足用户在不同场合下的需求。
2. 安全性能：产品采用过载保护、过热保护、短路保护等多种安全保护措施，确保使用过程中的安全。
3. 操作简便：产品设计人性化，操作简单易懂，即使是初次使用电动工具的用户也能快速上手。
4. 高效节能：采用高效能电机，工作效率高，节能环保。
5. 便携式设计：产品体积小、重量轻，便于携带和存放。
6. 电池续航能力强：采用高性能锂电池，续航能力强，满足长时间工作的需求。
四、产品用途1. 家居装修：用于钻孔、切割、打磨、刨木等装修工序。
2. 工业生产：适用于金属、木材、塑料等材料的加工。
3. 户外活动：如露营、户外探险等活动中，可用于搭建帐篷、制作简易家具等。
4. 日常生活：用于修理、组装、拆卸等日常生活中的小项目。
五、使用方法1. 插入电源：将电源线插入插座，确保电源接通。
2. 电池充电：将电池装入电池仓，插入充电器，开始充电。
3. 选择功能：根据需要选择相应功能，如电钻、电锯、电磨等。
4. 操作使用：按下启动按钮，开始使用电动工具。
5. 注意事项：a. 使用前请仔细阅读说明书，了解产品特性及操作方法。
b. 使用时请佩戴防护眼镜、手套等防护用品。
c. 请勿将电动工具放置在潮湿、高温、易燃易爆等环境中。
d. 使用过程中，请确保电动工具固定牢固，避免因震动导致意外伤害。
HD14053B中文资料
Hitachi CodeJEDECEIAJWeight (reference value)DP-16 Conforms Conforms 1.07 gHitachi Code JEDEC EIAJWeight (reference value)FP-16DA —Conforms 0.24 g*Dimension including the plating thicknessBase material dimension° – 8°Hitachi CodeJEDECEIAJWeight (reference value)FP-16DNConformsConforms0.15 gUnit: mm*Dimension including the plating thickness Base material dimension° – 8°元器件交易网Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.Hitachi Asia Pte. Ltd.16 Collyer Quay #20-00Hitachi TowerSingapore 049318Tel: 535-2100Fax: 535-1533URLNorthAmerica : http:/Europe : /hel/ecg Asia (Singapore): .sg/grp3/sicd/index.htm Asia (Taiwan): /E/Product/SICD_Frame.htm Asia (HongKong): /eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.Taipei Branch Office3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105)Tel: <886> (2) 2718-3666Fax: <886> (2) 2718-8180Hitachi Asia (Hong Kong) Ltd.Group III (Electronic Components)7/F., North Tower, World Finance Centre,Harbour City, Canton Road, Tsim Sha Tsui,Kowloon, Hong Kong Tel: <852> (2) 735 9218Fax: <852> (2) 730 0281 Telex: 40815 HITEC HXHitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 778322Hitachi Europe GmbHElectronic components Group Dornacher Stra§e 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:。
MB1说明书20100401
目录第一章系统功能介绍1.1.1 主控微机输入接线端子（变频电梯FBxx16） ------------------------------2 1.1.2 主控微机输出接线端子（变频电梯FBxx16）-------------------------------3 1.1.3 主控微机输入接线端子（变频电梯FAxx16） ------------------------------2 1.1.4 主控微机输出接线端子（变频电梯FAxx16）-------------------------------5 1.1.5 主控微机输入接线端子（双速电梯EExx16）-------------------------------7 1.1.6 主控微机输出接线端子（双速电梯EExx16）-------------------------------8 1.1.7 主控微机呼梯 ---------------------------------------------------------9 1.1.7.1呼梯按钮开关接线端子------------------------------------------------9 1.1.7.2呼梯按钮灯接线 -----------------------------------------------------10 1.1.8 脉冲计数电压选择 ----------------------------------------------------10第二章系统参数菜单2.1液晶显示屏及按键功能介绍------------------------------------------------17 2.2主菜单------------------------------------------------------------------17 2.2.10 CALL（召梯指令）菜单 -----------------------------------------------18 2.2.20 TIME（定时计数）菜单------------------------------------------------19 2.2.30 STATION（设定层站）菜单---------------------------------------------22 2.2.40 I/O（输入输出点）菜单-----------------------------------------------24 2.2.50 SYSTEM（设置系统）菜单----------------------------------------------25 2.2.60 DOORS（门机系统）菜单 ----------------------------------------------29 2.2.70 ERROR（故障记录）菜单-----------------------------------------------30 2.2.80 PASSWORD(设置密码)菜单----------------------------------------------30 2.2.90 WELL（井道数据）菜单------------------------------------------------37第三章安装及调试3.1 减速距离的确定---------------------------------------------------------40 3.2 试运行慢车输入信号-----------------------------------------------------40 3.3 试运行快车输入信号要求-------------------------------------------------40 3.4 井道自学习方法---------------------------------------------------------40第四章故障说明及处理方法-------------------------------------------------41第一章：系统功能介绍1.1.1主控微机输入接线端子(变频电梯FBxx16)：端子号功能注释X+24V 板内与V+24连接输出电源XGND 板内与V0连接COM6 X00公共端3种接法（编码器电压与短接片一致：5V，12V，24V）: A:编码器脉冲信号负输入时，COM6接编码器电源正极时，X00接编码器A相或B相B:编码器脉冲信号正输入时，X00接编码器电源负极时，COM6接编码器A相或B相C:编码器脉冲信号为互补型时，A相B相分别任意接COM6，X00。
轴承代号含义接触器型号含义
轴承代号含义-接触器型号含义施耐德接触器型号施耐德接触器型号220V线圈型号LC1D09M7C| LC1D12M7C| LC1D18M7C| LC1D25M7C| LC1D32M7C| LC1D38M7C| LC1D40M7C| LC1D50M7C| LC1D65M7C| LC1D80M7C| LC1D95M7C| LC1D11500M7C| LC1D15000M7C| LC1D205M7C| LC1D245M7C| LC1D300M7C| LC1D410M7C| LC1D475M7C| LC1D620M7C380V线圈型号LC1D09Q7C| LC1D12Q7C|LC1D18Q7C| LC1D25Q7C| LC1D32Q7C| LC1D38Q7C| LC1D40Q7C| LC1D50Q7C| LC1D65Q7C| LC1D80Q7C| LC1D95Q7C| LC1D11500Q7C| LC1D15000Q7C| LC1D205Q7C| LC1D245Q7C| LC1D300Q7C| LC1D410Q7C| LC1D475Q7C| LC1D620Q7C施耐德热继电器型号LR2-D1301|LR2-D1302|LR2-D1303|LR2-D1304|LR2-D1305|LR2-D1306|LR2-D13 07|LR2-D1308|LR2-D1310|LR2-D1312|L R2-D1314|LR2-D1316|LR2-D1321|LR2-D1322|LR2-D2353|LR2-D3353|LR2-D33 55|LR2-D3357|LR2-D3359|LR2-D3361|L R2-D3363|LR2-D3365|LR2-D4365|LR2-D4367|LR2-D4369施耐德断路器NSE100E3025C65N 1P C1A C65N 1P D1A VIGIC65 1P+N 40A ELE C32H-DC 1P 1A C65N 1P C2A C65N 1P D2A VIGIC65 1P+N 63A ELE C32H-DC 1P2A C65N 1P C4A C65N 1P D4A VIGIC65 2P 40A ELE C32H-DC 1P 3A C65N 1P C6A C65N 1P D6A VIGIC65 2P 63A ELE C32H-DC 1P 6A C65N 1P C10A C65N 1P D10A VIGIC65 3P 40A ELE C32H-DC 1P 10A C65N 1P C16A C65N 1P D16A VIGIC65 3P 63A ELE C32H-DC 1P 16A C65N 1P C20A C65N 1P D20A VIGIC65 4P 40A ELE C32H-DC 1P 20A C65N 1P C25A C65N 1P D25A VIGIC65 4P 63A ELE C32H-DC 1P 25A C65N 1P C32A C65N 1P D32A VIGIC65 G 1P+N 40A ELE C32H-DC 1P 32A C65N 1P C40A C65N 1P D40A VIGIC65 G 1P+N 63A ELE C32H-DC 1P 40AC65N 1P C50A C65N 1P D50A VIGIC65 G 2P 40A ELE C32H-DC 2P 1A C65N 1P C63A C65N 1P D63A VIGIC65 G 2P 63A ELE C32H-DC 2P 2A C65N 2P C1A C65N 2P D1A VIGIC65 2P 32A ELM C32H-DC 2P 3A C65N 2P C2A C65N 2P D2A VIGIC65 2P 40A ELMC32H-DC 2P 6A C65N 2P C4A C65N 2P D4A VIGIC65 2P 63A ELM C32H-DC 2P 10A C65N 2P C6A C65N 2P D6A VIGIC65 3P 32A ELM C32H-DC 2P 16A C65N 2P C10A C65N 2P D10A VIGIC65 3P 40A ELM C32H-DC 2P 20A C65N 2P C16A C65N 2P D16A VIGIC65 3P 63A ELM C32H-DC 2P 25A C65N 2P C20A C65N 2P D20A VIGIC65 4P 32A ELM C32H-DC 2P 32A C65N 2P C25A C65N 2P D25A VIGIC65 4P 40A ELM C32H-DC 2P 40A C65N 2P C32A C65N 2P D32A VIGIC65 4P 63A ELM VIGINC100 2P 30MA C65N 2P C40A C65N 2P D40A NC100H 断路器VIGINC100 2P 300MA C65N 2P C50A C65N 2P D50A NC100H C 1P 63A VIGINC100 2P 500MA C65N 2P C63A C65N 2P D63A NC100H C 1P 80A VIGINC100 2P 300MA S C65N 3P C1A C65N 3P D1A NC100H C 1P 100A VIGINC100 3P 30MA C65N 3P C2AVIGINC100 3P 300MA C65N 3P C4A C65N 3P D4A NC100H C 2P 80A VIGINC100 3P 500MA C65N 3P C6A C65N 3P D6A NC100H C 2P 100A VIGINC100 3P 300MA S C65N 3P C10A C65N 3P D10A NC100H C 3P 63A VIGINC100 4P 30MA C65N 3P C16A C65N 3P D16A NC100H C 3P 80A VIGINC100 4P 300MA C65N 3P C20A C65N 3P D20A NC100H C 3P 100A VIGINC100 4P 500MA C65N 3P C25A C65N 3P D25A NC100H C 4P 63A VIGINC100 4P 300MA S C65N 3P C32A C65N 3P D32A NC100H C 4P 80A NC125H 断路器C65N 3P C40A C65N 3P D40A NC100H C 4P 100A NC125H C 1P 125A C65N 3P C50A C65N 3P D50A NC100H D 1P 63A NC125H C 2P 125A C65N 3P C63A C65N 3P D63A NC100H D 1P 80A NC125H C125A 3P C65N 4P C1ANC125H C 4P 125A C65N 4P C2A C65N 4P D2A NC100H D 2P 63A C65H 3P D20AC65N 4P C4A C65N 4P D4A NC100H D 2P 80A C65H 3P D25AC65N 4P C6A C65N 4P D6A NC100H D 2P 100A C65H 3P D32A C65N 4P C10A C65N 4P D10A NC100H D 3P 63A C65H 3P D40A C65N 4P C16A C65N 4P D16A NC100H D 3P 80A C65H 3P D50A C65N 4P C20A C65N 4P D20A NC100H D 3P 100A C65H 3P D63A C65N 4P C25A C65N 4P D25A NC100H D 4P 63A C65H 1P D20A C65N 4P C32A C65N 4P D32A NC100H D 4P 80A C65H 1P D25A C65N 4P C40A C65N 4P D40A NC100H D 4P 100A C65H 1P D32A C65N 4P C50A C65N 4P D50A C65L 3P D50A C65H 1P D40AC65N 4P C63A C65N 4P D63A C65L3P D63A C65H 1P D50A 互感器的型号含义互感器的型号含义由字母符号及数字组成，通常表示电流互感器绕组类型、绝缘种类、使用场所及电压等级等。
1J30、1J31、1J32、1J33、1J38
1J3 0- 0-
0 0.6 0.4
05
0.6 0.4
1J3 0- 0-
1 0.8 0.6
55
0.8 0.6
1J3 0- 0-
2 1.1 0.9
05
0.4
1J3 3
——
00.7
0
0.2 0.0
1J3 5- 5-
8 0.4 0.2
24
60 40 ℃ ℃
80 ℃
0.0
——
20.1
——
3
0.1
——
50.4
磷
秒
锰
硅
你
铝
1J30
≤0.04
≤0.020
≤0.020
≤0.40
≤0.30
29.530.5
——
铬铁 —— 平衡
1J31
≤0.04
≤0.020
≤0.020
≤0.40
≤0.30
30.531.5
——
—— 平衡
1J32
≤0.04
≤0.020
≤0.020
≤0.40
≤0.30
31.532.5
——
≤0.020
0.300.60
0.30- 32.8- 1.000.60 33.8 2.00
——
平衡
1J38 ≤0.05 ≤0.020 ≤0.020
0.300.60
0.15- 37.51.30 38.5
——
12.513.5
平衡
磁性
不同温度和磁场强度下的磁感应强度 8000 A/m, B/T
指
定
20
20
℃℃
0.4 0.2
特点是其磁感应强度会随着温度的升高（居里点以下）而线性降低。
2019版中文目录第18-B章节 圆形M12-B
M12 圆形连接器,B编码电缆连接器•屏蔽/不屏蔽系列•可安装系列和浇铸电缆系列•M12锁紧•螺钉压接•屏蔽环和环形弹簧屏蔽连接•电缆长度1.5米和5米•可定制其它电缆长度200件起订•电缆材质可根据要求定制•防护等级 IP67•带螺母防松弹片M 12-B额定电流(40℃)额定电压额定脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料4A 250V 2500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞100-40℃...+85℃III铜合金Au PAPA/PBT4A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞100-40℃...+85℃III铜合金Au PAPA/PBT针, 塑料锁紧件, 螺钉压接60/125/250V 2/4A 直头电缆连接器圆形连接器 M12-B 针, 不锈钢锁紧件, 螺钉压接针, 金属锁紧件, 螺钉压接推荐使用插针数45技术参数4-pole5-pole订货号163 004 411 3105163 004 411 3106163 005 411 3105163 005 411 3106电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm型号M12P-M04B-T-D6M12P-M04B-T-D8M12P-M05B-T-D6M12P-M05B-T-D8插针数45订货号163 004 411 1001163 004 411 1002163 005 411 1001163 105 411 3002电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm型号M12-M04B-T-D6M12-M04B-T-D8M12-M05B-T-D6M12-M05B-T-D8插针数45订货号163 004 411 1003163 004 411 1004163 005 411 1003163 005 411 1004电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm 型号M12S-M04B-T-D6M12S-M04B-T-D8M12S-M05B-T-D6M12S-M05B-T-D8Φ2061M 12*1Φ18.5Φ2061M 12*1Φ18.5SW18Φ2061M 12*1Φ18.512B-Code5pin4pin B-Code5pin4pin B-Code5pin4pin针, 塑料锁紧件, 螺钉压接针数:1-4 8A; 针数:5 2A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.1.5mm 2(max.AWG16)8-10mm IP67＞100-40℃...+85℃II 铜合金Au PAPA/PBT125/250V 2/8A 直头电源电缆连接器圆形连接器 M12-B 技术参数5-pole额定电流(40℃)额定电压脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料插针数5订货号163 005 411 3107电缆出口直径8-10 mm型号M12P-M05B-T-D10Φ2061M 12*1Φ18.5针, 不锈钢锁紧件, 螺钉压接针, 金属锁紧件, 螺钉压接推荐使用插针数5订货号163 005 411 1002电缆出口直径8-10 mm型号M12-M05B-T-D10插针数5订货号163 005 411 1005电缆出口直径8-10 mm型号M12S-M05B-T-D10Φ2061M 12*1Φ18.5SW18Φ2061M 12*1Φ18.512B-Code5pinB-Code5pinB-Code5pin12针, 带屏蔽圈, 螺钉压接推荐使用60/125/250V 2/4A 直头屏蔽电缆连接器圆形连接器 M12-B 技术参数额定电流(40℃)额定电压脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料插针数45订货号163 004 411 2006163 004 411 2007163 005 411 2007163 005 411 2008电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm 型号M12-M04B-T-D6-SH M12-M04B-T-D8-SH M12-M05B-T-D6-SH M12-M05B-T-D8-SH 4A 250V 2500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8mm IP67＞100-40℃...+85℃II铜合金Au PA铸锌镀镍,黄铜镀镍4A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8mm IP67＞100-40℃...+85℃II铜合金Au PA铸锌镀镍,黄铜镀镍4-pole5-pole59.9SW17SW14Φ20M12x 1B-Code5pin4pin12额定电流(40℃)额定电压额定脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料针, 塑料锁紧件, 螺钉压接125/250V 4A 弯角电缆连接器圆形连接器 M12-B 针, 不锈钢锁紧件, 螺钉压接针, 金属锁紧件, 螺钉压接推荐使用插针数45技术参数4A 250V 2500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞100-40℃...+85℃II铜合金Au PAPA/PBT4A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞100-40℃...+85℃II铜合金Au PAPA/PBT4-pole5-pole订货号163 004 511 3105163 004 511 3106163 005 511 3105163 005 511 3106电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm 型号M12P-M04B-S-D6M12P-M04B-S-D8M12P-M05B-S-D6M12P-M05B-S-D8插针数45订货号163 004 511 1001163 004 511 1002163 005 511 1001163 005 511 1002电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm 型号M12-M04B-S-D6M12-M04B-S-D8M12-M05B-S-D6M12-M05B-S-D8插针数45订货号163 004 511 1003163 004 511 1004163 005 511 1004163 005 511 1005电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm 型号M12S-M04B-S-D6M12S-M04B-S-D8M12S-M05B-S-D6M12S-M05B-S-D8M 12x 1M 12x 142.443.4(43)(43)Φ2017.94Φ2M 12x 142.4(43)Φ20B-Code4pin5pinB-Code4pin5pinB-Code4pin5pin12针, 塑料锁紧件, 螺钉压接弯角电源电缆连接器针, 不锈钢锁紧件, 螺钉压接针, 金属锁紧件, 螺钉压接推荐使用插针数5订货号163 005 511 3107电缆出口直径8-10mm 型号M12P-M05B-S-D10插针数5订货号163 005 511 1003电缆出口直径8-10mm 型号M12-M05B-S-D10插针数5订货号163 005 511 1006电缆出口直径8-10mm 型号M12S-M05B-S-D10M 12x 1M 12x 142.443.4(43)(43)Φ2017.94Φ20M 12x 142.4(43)Φ20针数:1-4 8A; 针数:5 2A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.1.5mm 2(max.AWG16)8-10mm IP67＞100-40℃...+85℃II 铜合金Au PAPA/PBT125/250V 2/8A 圆形连接器 M12-B 技术参数5-pole额定电流(40℃)额定电压脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料B-Code5pinB-Code5pinB-Code5pin额定电流(40℃)额定电压额定脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料针, 螺钉压接, 带屏蔽圈125/250V 4A 弯角屏蔽电缆连接器圆形连接器 M12-B插针数45技术参数4A 250V 2500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞100-40℃...+85℃III铜合金Au PA铸锌镀镍4A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞100-40℃...+85℃III铜合金Au PA铸锌镀镍4-pole5-pole订货号163 004 511 2003163 004 511 2004163 005 511 2003163 005 511 2004电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm 型号M12-M04B-S-D6-SH M12-M04B-S-D8-SH M12-M05B-S-D6-SH M12-M05B-S-D8-SH SW19.5Φ20(44)(46.2)Φ20M 12X 13112B-Code4pin5pin额定电流(40℃)额定电压额定脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料4A 250V 2500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞100-40℃...+85℃II铜合金Au PAPA/PBT4A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞100-40℃...+85℃II铜合金Au PAPA/PBT孔, 塑料锁紧件, 螺钉压接60/125/250V 2/4A 直头电缆连接器圆形连接器 M12-B 孔, 不锈钢锁紧件, 螺钉压接孔, 金属锁紧件, 螺钉压接插针数45技术参数4-pole5-pole订货号163 004 421 3106163 004 421 3107163 005 421 3106163 005 421 3107电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm型号M12P-F04B-T-D6M12P-F04B-T-D8M12P-F05B-T-D6M12P-F05B-T-D8插针数45订货号163 004 421 1001163 004 421 1002163 005 421 1001 163 105 421 3002电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm型号M12-F04B-T-D6M12-F04B-T-D8M12-F05B-T-D6M12-F05B-T-D8插针数45订货号163 004 421 1003163 004 421 1004163 005 421 1003163 005 421 1004电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm型号M12S-F04B-T-D6M12S-F04B-T-D8M12S-F05B-T-D6M12S-F05B-T-D8Φ20(56)(56)Φ20SW18M 12*1Φ20(56)M 12*1M 12*1Φ18.5推荐使用12B-Code4pin5pinB-Code4pin5pinB-Code4pin5pin孔, 塑料锁紧件, 螺钉压接直头电源电缆连接器孔, 不锈钢锁紧件, 螺钉压接孔, 金属锁紧件, 螺钉压接推荐使用插针数5订货号163 005 421 3108电缆出口直径8-10mm型号M12P-F05B-T-D10插针数5订货号163 005 421 1002电缆出口直径8-10mm型号M12-F05B-T-D10插针数5订货号163 005 421 1005电缆出口直径8-10mm型号M12S-F05B-T-D10Φ20(56)(56)Φ20SW18M 12*1Φ20(56)M 12*1M 12*1Φ18.512针数:1-4 8A; 针数:5 2A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.1.5mm 2(max.AWG16)8-10mm IP67＞100-40℃...+85℃II 铜合金Au PAPA/PBT125/250V 2/8A 圆形连接器 M12-B 技术参数5-pole额定电流(40℃)额定电压脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料B-Code5pinB-Code5pinB-Code5pin12孔, 带屏蔽圈, 螺钉压接推荐使用60/125/250V 2/4A 直头屏蔽电缆连接器圆形连接器 M12-B 技术参数额定电流(40℃)额定电压脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料插针数45订货号163 104 421 2001163 004 421 2005163 005 421 2006163 105 421 3003电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm型号M12-F04B-T-D6-SH M12-F04B-T-D8-SH M12-F05B-T-D6-SH M12-F05B-T-D8-SH4A 250V 2500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8mm IP67＞100-40℃...+85℃II铜合金Au PA铸锌镀镍,黄铜镀镍4A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8mm IP67＞100-40℃...+85℃II铜合金Au PA铸锌镀镍,黄铜镀镍4-pole5-poleΦ2054.9SW17SW14M 12x 1B-Code4pin5pin12额定电流(40℃)额定电压额定脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料孔, 塑料锁紧件, 螺钉压接125/250V 4A 弯角电缆连接器圆形连接器 M12-B 孔, 不锈钢锁紧件, 螺钉压接孔, 金属锁紧件, 螺钉压接推荐使用插针数45技术参数4A 250V 2500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞50-40℃...+85℃II铜合金Au PAPA/PBT4A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞50-40℃...+85℃II铜合金Au PAPA/PBT4-pole5-pole订货号163 004 521 3105163 004 521 3106163 005 521 3103163 005 521 3104电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm 型号M12P-F04B-S-D6M12P-F04B-S-D8M12P-F05B-S-D6M12P-F05B-S-D8插针数45订货号163 004 521 1001163 004 521 1002163 005 521 1001163 005 521 1002电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm 型号M12-F04B-S-D6M12-F04B-S-D8M12-F05B-S-D6M12-F05B-S-D8插针数45订货号163 004 521 1003163 004 521 1004163 005 521 1004163 005 521 1005电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm 型号M12S-F04B-S-D6M12S-F04B-S-D8M12S-F05B-S-D6M12S-F05B-S-D8M 12x 1M 12x 14040(43)(43)Φ20M 12x 140(43)Φ20SW18Φ2B-Code4pin5pinB-Code4pin5pinB-Code4pin5pin12孔, 塑料锁紧件, 螺钉压接弯角电源电缆连接器孔, 不锈钢锁紧件, 螺钉压接孔, 金属锁紧件, 螺钉压接推荐使用插针数5订货号163 005 521 3105电缆出口直径8-10 mm 型号M12P-F05B-S-D10插针数5订货号163 005 521 1003电缆出口直径8-10 mm 型号M12-F05B-S-D10插针数5订货号163 005 521 1006电缆出口直径8-10 mm 型号M12S-F05B-S-D10M 12x 1M 12x 14040(43)(43)Φ20M 12x 140(43)Φ20SW18Φ2针数:1-4 8A; 针数:5 2A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.1.5mm 2(max.AWG16)8-10mm IP67＞100-40℃...+85℃II 铜合金Au PAPA/PBT125V 2/8A 圆形连接器 M12-B 技术参数5-pole额定电流(40℃)额定电压脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料B-Code5pinB-Code5pinB-Code5pin12额定电流(40℃)额定电压额定脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料孔, 螺钉压接, 带屏蔽圈125/250V 4A 弯角屏蔽电缆连接器圆形连接器 M12-B 插针数45技术参数4A 250V 2500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞100-40℃...+85℃III铜合金Au PA铸锌镀镍4A 125V 1500V 3II≤10 mΩ螺纹 M12x1螺钉压接max.0.75mm 2(max.AWG18)4-6,6-8 mm IP67＞100-40℃...+85℃III铜合金Au PA铸锌镀镍4-pole5-pole订货号163 004 521 2003163 004 521 2004163 005 521 2003163 005 521 2004电缆出口直径4-6 mm 6-8 mm 4-6 mm 6-8 mm 型号M12-F04B-S-D6-SH M12-F04B-S-D8-SH M12-F05B-S-D6-SH M12-F05B-S-D8-SH Φ20SW19.5Φ20M 12x 1(39)31(46.2)B-Code4pin5pin装配说明12装配说明M12-B零件图样12M 12-B额定12带线直头电缆连接器额定电流(40℃)额定电压脉冲电压污染等级过电压保护等级接触电阻锁紧方式连接方式线规电缆直径外壳防护等级拔插次数温度范围绝缘材料组别触点材料触点电镀材料绝缘材料外壳材料4A250V2500V3II≤10 mΩ螺纹 M12x1压接,浇铸电缆0.34mm2(AWG22)-IP67 带屏蔽＞100-25℃ (85)II铜合金AuPATPU4A250V2500V3II≤10 mΩ螺纹 M12x1压接,浇铸电缆0.34mm2(AWG22)-IP67 带屏蔽＞100-25℃ (85)II铜合金AuPATPU60/125/250V 2/4A圆形连接器 M12-B技术参数3-pole4-pole4A125V1500V3II≤10 mΩ螺纹 M12x1压接,浇铸电缆0.25mm2AWG24)-IP67 带屏蔽＞100-25℃ (85)II铜合金AuPATPU5-pole•可定制其他电缆长度。
宝钢电工钢产品手册
03
Application Fields Of Electrical Steel
应用领域
04
ൽၠߒ߾ۉ ᆌᆩଶᇘ G P R Aဣଚ
ൽၠߒ߾ۉ AHဣଚ AR AT
ဣଚ ဣଚ ဣଚ 230~400 440~700 800~1300 230~470 600~1000 ဣଚ ဣଚ
ٷ႙ۉऐ ዐ႙ۉऐ უऐۉऐ ገഗ ཚᆩۉऐ ၭ႙ۉऐ ۯۉഛכᆩۉऐ ߛೕ߾ፕۉऐ ٷ႙Վუഗ ၭ႙ۉᇸՎუഗ ᅏഗᆩՎუഗ ৢኹഗ ੇۉഗतٷݣىഗ ۉᇸਸ࠲ ࡰথᆩՎუഗ ࿘უഗ ىႠހഗ ेഗᆩىۉഗ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √
P17/50
1.15 1.23 1.17 1.25 1.32
P15/60
1.02 1.07 1.09 1.15 1.17
B8
1.85 1.85 1.86 1.85 1.84
B25
1.92 1.92 1.93 1.92 1.91
B27G120 B27G130 B30G120 B30G130 B30G140
B
铁损值P17/50(W/kg)×100 公称厚度(mm)×100 宝钢Baosteel 取向电工钢： G—普通取向电工钢系列 P—高磁感取向电工钢系列 R—磁畴细化高磁感取向电工钢系列
B
铁损值P15/50(W/kg)×100(除AT系列外)，P10/400(W/kg)×100(AT系列) 公称厚度(mm)×100 宝钢Baosteel 无取向电工钢：A—普通无取向电工钢系列 AH—高效无取向电工钢系列 AR—消除应力退火高效无取向电工钢系列 AT—高频低铁损无取向电工钢系列
变压器技术参数特性表
SCB10-1000/10技术参数特性表序号名称单位标准参数值投标人保证值一额定值1 变压器参数见续表 1 SCB10-1000/102 铁心材质冷轧取向硅钢片硅钢片3 线圈结构包封式/非包封式包封式4 高压绕组kV 见续表 1 105 低压绕组kV 0.4 0.46 额定频率Hz 50 507 额定容量kVA 见续表 1 38 相数 3 39 调压方式无励磁无励磁10 调压位置高压侧高压侧11 调压范围见续表 1 ±2×2.5%12 中性点接地方式不接地不接地13 冷却方式AN/AF AN/AF14 联接组标号见续表 1 DYn1115 磁通密度T （投标人提供） 1.5416 绝缘耐热等级F级及以上 F17 局部放电水平pC ≤10 ≤10二绝缘水平1 雷电全波冲击电压（峰值）kV75 752 雷电截波冲击电压（峰值）85 853 高压绕组额定短时工频耐受电压（有效值）kV 35 354 低压绕组额定短时工频耐受电压（有效值）kV5 5三温升限值1 额定电流下的绕组平均温升（F）K 100 1002 额定电流下的绕组平均温升（H）125 （投标人填写）四空载损耗1 额定频率额定电压时空载损耗kW 见续表 1 1.77五空载电流1 100％额定电压时％见续表 1 1表1（续）序号名称单位标准参数值投标人保证值六负载损耗1 主分接（120℃）kW 见续表 1 8.13七噪声水平dB 见续表 1 72八质量和尺寸1 总质量t （投标人提供） 3.1续表1变压器容量（kVA）高压（kV）高压分接范围（％）低压（kV）联结组标号空载损耗（kW）负载损耗（kW）空载电流（％）短路阻抗（％）轨距A×Ｂ（mm×mm）噪声水平（dB）5010 ±2×2.5 0.4 D,yn11 0.27 1.0 2.44.0550×55064100 0.4 1.57 1.8 550×55065 160 0.54 2.13 1.6 550×55066 200 0.62 2.53 1.4 660×550 67 250 0.81 2.92 1.4 660×550 67 315 0.88 3.47 1.2 660×660 69 400 1.1 4.22 1.2 660×660 69 500 1. 16 4.88 1.2 660×660 70 630 1.34 5.88 1.0 820×820 71630 1.300 5.96 1.06.0 820×820 71800 1..52 6.96 1.0 820×820 72 1000 1.77 8.13 1.0 820×820 72 1250 2.09 9.69 1.0 1070×82074 1600 2.45 11.73 1.0 1070×820742 组件材料配置表项目单位：项目名称：序号项目货物需求投标人(唯一确定)响应元件名称型式规格，参数单位数量型式、规格数量制造商原产地变压器本体台1、单台本体及组部件1.1 高压绝缘子支/台投标人提供复合 31.2 低压绝缘子支/台投标人提供复合 61.3 低压中性点绝缘子支/台投标人提供复合1.4 温度控制器台/台投标人提供BWDK-3208D 1南京超博江苏南京1.5 铭牌、标识牌和警示牌套/台投标人提供不锈钢 1 不锈钢河南逐鹿1.6 风机台/台投标人提供GFDD470-110 6福建力得福建福州2、主要材料2.1 硅钢片Kg/台投标人提供30Q120 1885武汉钢铁湖北武汉2.2 铜线Kg/台投标人提供SBEMB-0.4/155 361顺特电气广东广州2.3 钢材Kg/台投标人提供Q235 162 安钢安阳项目单位：项目名称：序号项目货物需求投标人(唯一确定)响应元件名称型式规格，参数单位数量型式、规格数量制造商原产地2.4 铜箔Kg/台投标人提供TU1 233中铝洛阳洛阳2.5 环氧树脂Kg/台投标人提供8088A 117江西宏特江西抚州编制说明1.项目货物需求单位在“项目货物需求-数量”中仅保留具体数量，括号中说明性语句为编写参考，须在编写过程中删除。
2016年干式变压器技术手册( 5-12)
SCB10-800/10 1520 6950 0.6
50 2100 1350 1100 1061 820 1000 1006 959 349 433 450 130 i
SCB10-1000/10 1770 8120 0.6
50 2500 1430 1100 1125 820 1000 1125 1024 365 450 470 170 i
南京大全变压器有限公司
10kV 级 SC(B)10 型 30~4000kVA 带 IP20 保护外壳尺寸及运输重量
型号
SC10-30/10 SC10-50/10 SCB10-80/10 SCB10-100/10 SCB10-125/10 SCB10-160/10 SCB10-200/10 SCB10-250/10 SCB10-315/10 SCB10-400/10 SCB10-500/10 SCB10-630/10 SCB10-630/10 SCB10-800/10 SCB10-1000/10 SCB10-1250/10 SCB10-1600/10 SCB10-2000/10 SCB10-2500/10 SCB10-3150/10 SCB10-1600/10 SCB10-2000/10 SCB10-2500/10 SCB10-3150/10 SCB10-4000/10 SCB10-2000/10 SCB10-2500/10 SCB10-3150/10 SCB10-4000/10
44 300 560 450 645 300 400 645 576 198 330 190 / a
SC10-50/10 280 990 1.6
44 350 800 700 566 400 600 591 480 239 316 275 80 a
LD-2010杠杆设备产品目录说明书
Li f t i n g D ev i c e s2Lifting BeamsEconomicalAdjustable Spreader/Lifting Beam(ASLB16) ............................................. 4 Adjustable Lifting Beam (ALB17) .............. 4 Fixed Spread Lifting Beam (FSLB19) ....... 5 Basket Sling Lifting Beam (BSLB18) ........5 I ndustrialLow Headroom Multiple Spread Lifting Beam (LHLB20) ....................6, 7 Heavy Duty Twin Basket Sling Lifting Beam (HDLB22) ..................................8 Twin Hoist Lifting Beam (THLB25) ...........9 SpreaderFixed Spreader Beam (FSB30) ...............10 Adjustable Spreader Beam (ASB32) .......11 Modular Spreader Beam (MSB14) . (12)Coil LifterD ixon Coil Hook with Pivoting Wedge (DCH80) .....................................13 H eavy Duty Coil Hook (HDCH82) .. (13)Construction ToolsBeam/Girder ClampsBeam Flange Clamp (BFC) (14)Girder Clamp (GC)..................................14 Beam Grab (F) ........................................15 Pipe & Manhole Lifting Pipe Grab (C/S) ......................................16 Pipe Tongs (PLT) ....................................17 Concrete Manhole Lifter (MHL) ..............18 Manhole Sleeve Lifter (MCL) .................19 Tea Cup Pipe Carrier (TC) .....................20 Tea Cup Sling (TCS) ..............................20 Pipe Pick (CPP)......................................21 Barrier Grab (BRG74) . (22)TABLE OF CONTENTSFork Lift AccessoriesBooms F ixed Fork Lift Booms (FFLB) ........................23 S ingle Fork Hook (SFH) .................................23 T elescoping Fork Lift Booms (TFLB) ..............24 D ouble Fork Beam (DFB) ...............................24 P ivoting Fork Lift Booms (PFLB) .. (25)Specialty ProductsFiberglass Battery Lifting Beam (BLB) .............26 Battery Lifting Beam, Low Headroom(BLBLHA) ......................................................27 Adjust-A-Link ....................................................28 Adjust-A-Leg .. (29)Gantry CranesFixed Steel (H90) .......................................30, 31 Adjustable Steel (K90) ................................32, 33Fixed Aluminum (HA90) ...................................34 Adjustable Aluminum (KA90) . (35)3 Quality Engineered ProductsAll of the products in this catalog have beenengineered and produced to the highest qualitystandards and meet or exceed all applicable U.S.government standards including OSHA andASME B30.20 AND B30.9. Random proof testingis standard. Proof testing with certification isavailable upon request for a nominal charge.Product OverviewLifting BeamsPRODUCT INFORMATIONAllow for multiple pick points ofthe load for balance or supportissues. Spreader Beams havea top rigging that add stability tothe lift. Available in 9 standardstyles.Beam/Girder ClampsFor use in lifting and positioningstructural beams. Two stylesmay also be hung from loadbearing beams to suspendhoists or other lifting devices.Coil LiftersUse to lift, manipulate andreposition coils. Requiresminimum aisle space equal toLifter arm length. Available in 2standard styles.Gantry CranesThese portable cranes allow forthe pick up and transport of aload wherever you have asmooth and level floor. Availablein either steel or aluminum, fixedor adjustable height.Pipe & Manhole LiftingFor the lifting and positioningof steel, iron and concrete pipes.Pipe Grabs are for metal pipes.Pipe Picks and Tea Cups forconcrete pipes.Barrier GrabsScissor style grab is the easyway to lift and move concreteroad barriers. Auto-latch forhands-off operation.Forklift AccessoriesThree styles of booms andtwo hook devices provideadded lifting capabilities toyour forklift trucks.Battery Beams provide a non-conductive lifting method forindustrial batteries. (i.e.-forkliftbatteries)Adjust-A-Leg slings allowcontrolled lifting of loads wherelift points are not equidistantfrom the load’s center of gravity.Specialty Products4FEATURES• Use for 2, 3 or 4 point lifting or as spreader beam (add top rigging)• Adjustable lifting points • Good for unbalanced loads • Low headroom • Shackles included • 6" spread adjustments • 4" bail adjustments OPTIONS• Pair of swivel hooks - Code S*• Top chain rigging - Code CFEATURES• Adjust bail for unbalanced load • 6" spread adjustments • Shackles includedOPTIONS• Pair of swivel hooks - Code S*ECONOMICAL LIFTING BEAMSAdjustable Spreader/Lifting Beam (ASLB16)* For Optional Swivel Hooks, add an “S” to part No. Contact Lift-All for added cost.Adjustable Lifting Beam (ALB17)Bail Adjustment forUnbalanced LoadsLift Point Adjustment for Load Length5ECONOMICAL LIFTING BEAMSFEATURES• Fixed spread lifting • Eye hooks with latches• Sealed construction for cleaner beamFixed Spread Lifting Beam (FSLB19)Basket Sling Lifting Beam (BSLB18)FEATURES• Best beam for low headroom applications • Fixed spread lifting• Bent bar hooks allow for 2" wide sling eyes - One set for 3' & 4' spreads - Two sets for 6' - 12' spreads •Spread 2 is 1/2 of Spread 16FEATURES• Great for low headroomapplications• Swivel hooks with latchesstandard•3' & 4' beams have 2 spreads•6' & longer beams have 3 spreads(Inner spread lengths are shorterthan outer spreads by 1' increments•Additional or repositioned holesavailable INDUSTRIAL LIFTING BEAMSLow Headroom Multiple Spread Lifting Beam (LHLB20)7Extra Holes Allows for extra hook positions in addition to the standard holes.Specify number and spread.Low Headroom Multiple Spread Lifting Beam (Continued)Options:Extra HooksAllows for multiple pick points.Saves time from having to move hooks.FasPinsAllows for easy repositioning of hooks.Recommended for frequent hookposition changes.8FEATURES• For use with slings in a basket hitch • Latch hooks designed to minimize sling eye damage• Two sets of fixed hooks are standard for all lengths over 4'• Inner spread is 1/2 of outer spread • Extra spreads available upon requestINDUSTRIAL LIFTING BEAMSHeavy Duty Twin Basket Sling Lifting Beam (HDLB22)9FEATURES• For use with two hoists to increase lift capacity• Swivel hook with latch standardTwin Hoist Lifting Beam (THLB25)INDUSTRIAL LIFTING BEAMSCenter hook offset to accommodate hoists of unequal capacities.Custom pick points for both top and bottom.Center bail and extra pair ofhooks for maximum versatility.10FEATURES• Adds stability to lift where headroom is not limited• Chain rigging standard, wire rope rigging availableFixed Spreader Beam (FSB30)SPREADER BEAMS* Add a "W" for Wire Rope RIggingAdd an "A" for Adjust-A-Link Rigging11SPREADER BEAMSAdjustable Spreader Beam (ASB32)FEATURES• Great versatility and stability where headroom is not limited• Chain rigging standard, wire rope rigging available• Telescoping spread adjusts in 1 in. increments* Add a "W" for Wire Rope RIggingSpread12SPREADER BEAMSModular Spreader Beam (MSB14)FEATURES• Designed to accommodate spreads from 10' to 22'• Capacities in 1 and 2 tons • Lightweight• Faspin with lanyard allows for quick adjustment of spread in 1' increments• Hair pin cotter to rigging attachment • Designed and manufactured to ASME standardsRecommended Optional Top Rigging (Add "R" to Part Number)2 Sets of 2-Leg Tuflex Roundslings per BeamOuter TubeInner Tube - each system contains (2)Short TubeLifting Eye Dimensions13COIL LIFTERSDixon Coil Hook with Pivoting Wedge (DCH80)Heavy Duty Coil Hook (HDCH82)FEATURES• For easy upending of coils from horizontal to vertical• Pivoting wedge great for lifting coils that have been stacked • Wedge also acts as a coil retainer• Excels in use with small, lightweight coils • Good for limited overhead clearance•Standard handle for easier coil positioningFEATURES• Designed for heavy duty applications• High tensile alloy steel plate reduces physical size and weight • Counter balanced to hang level when empty • Inside radius on hooks avoid coil edge contact • Guide handles for ease of hook positioning • Handles a wide range of coil widths•Available with optional padding for additional coil protectionHeadroom14FEATURES• Light weight, portable design• Jaw opening adjusts to a wide range of beam types and flange widths• Built in suspension pin for minimum headroom • Opposing thread screw spindles for rapid operation• Large Bail option available for large crane hooksCONSTRUCTION TOOLSBeam Flange Clamp (BFC)Great for the lifting of or suspension from I-BeamsFEATURES• Heavy duty design for lifting wide range of flange beams and plate girders• Screw-spindle design ensures positive grip • Opposing thread screw spindles for rapid operation• Simple design for minimum maintenanceGirder Clamp (GC)Designed for the lifting of or suspension from large girders and I-BeamsLarge Bail OptionAPBH15FEATURES• Heavy duty design for lifting wide flange beams and plate girders• Recessed base accepts studs in beam surface• Eliminates need for slings, chokers and spreader barsCONSTRUCTION TOOLSBeam Grab (F)(For vertical lifting only, not suspension)Operation:1.Lower grab onto beam.2. Lift arms, if necessary, to slide under beam flange.3. As beam is lifted, pressure forces arms together to secure beam.4. The heavier the beam, the greater the clamping force.W16FEATURES• Automatically clamps to pipe when lowered onto it • Moveable outriggers stabilize the pipe during lift • No blocking required• Quick and efficient handling of properly balanced pipeCONSTRUCTION TOOLSPipe Grab (C OR S)(For cast iron or steel pipe only)Operation:1. Lower grab onto approximate center of pipe. Grab will open and seat on pipe.2. Lift slowly to check for pipe balance. Never exceed a 15° angle.3. If angle exceeds 15°, lower pipe and reposition grab.17FEATURES• Pipe Tongs are made of sturdy construction to handle pipe, round bars, castings, etc• Tongs are provided with bare steel curved gripping arms• Optional replaceable urethane pads available to protect smooth or polished surfaces• Load must be balanced and controlled when lifting • May be used in pairs with a lifting beam for added stabilityCONSTRUCTION TOOLSPipe Tongs (PLT)(For vertical lifting only, not suspension)Decreasing the load by bumping or substantial imbalance can, under certain circumstances loosen the grip.Do not use in diameters other than those specified on nameplate.Specifications - Fixed DiameterSpecifications - Adjustable DiameterFixedAdjustable18FEATURES• Designed for 4"-6" concrete wall thickness• Will not damage concrete seat • Legs can be quickly positioned to balance load• 2 and 3 leg models available • Conforms to ASME B30.9 & B30.20Note: Constant tension required to maintain positive load contact.CONSTRUCTION TOOLSConcrete Manhole Housing Lifter (MHL)2 Leg Model3 Leg Model19TWO LEG LIFTERSTHREE LEG LIFTERSFEATURES• Easy to attach and release from sleeve • The quick and easy way to place cast manhole sleeves• 2 or 3 leg models availableManhole Sleeve Lifter (MCL)Note: Flange diameter range 12"-30".CONSTRUCTION TOOLS20FEATURES• Efficiently handles concrete water and sewer pipes • Three sizes available to lift up to 18 tons • Standard hand grip for ease of installation• Optional spoon handle available to assist Tea Cup placement (Model TC66 only) in small diameter pipesCONSTRUCTION TOOLSTea Cup Pipe Carrier (TC)Tea Cup Sling(TCS)For use with Tea Cup Carriers• 5 ft. standard lengthOPERATION1. Drop TCS Slingdown through hole in pipe2. Align and insert Tea Cup Pipe Carrier onto sling3. Lift pipeModel TC66Tea Cup Spoon Handle (TCSH)(Includes Bolt-on Lip)21FEATURES• Simple and fast• No need to reach inside the pipe• Worker remains above the pipe at all times • Use to easily join length of pipeCONSTRUCTION TOOLSPipe Pick (PP)(For concrete pipe only)Lift arm counter-weighted for easy removal22FEATURES• Labor saving, quick and easy hands-off operation•No slings or chains to attach•Reduces damage to barrier due to moving•Replaceable polyurethane lifting pads for unpaintedbarriers•Replaceable steel "Dog Point" lifting pads for paintedbarriers (typical in coastal areas) CONSTRUCTION TOOLSBarrier Grab (BRG74)The Barrier Grab isdesigned to handle 6"-12"nominal widths at thebarrier top (W)1. Grab in openposition is placedonto barrier. Autolatchwill disengage whenhoist line becomesslack.2. Raising cranehook will thencause pads toengage barrier.3. Lower barrierinto position.4. Slack in hoistline will engageauto-latch, holdinggrab open for removaland placement of nextbarrier.23FEATURES• Easy attachment - no tools required • Welded construction for durability • Promotes versatility of fork lift trucks • 3,000 lb. rated capacityFEATURES• Fixed length beam design• Restraining chain with grab hook FORK LIFT ACCESSORIESFixed Fork Lift Booms (FFLB)Note: Fixed hook shown, swivel hook also available.FFLB-15 Single Pick Point• Use with 1" or 2" wide web sling • Optional swivel hook availableFFLB-40 Multiple Pick Points• 5 alternate hook positions at 1 foot intervals • Fixed or swivel hooks availableSingle Fork Hook (SFH)24FEATURES• Telescoping boom for versatility • T-Pin locks boom into position • Handle on end for easy extension of boom• Swivel hooks with latch are standard• Restraining chain with grab hook standard• 12 ft. maximum horizontal reachFORK LIFT ACCESSORIESTelescoping Fork Lift Booms (TFLB)FEATURES• Easy attachment - no tools required• Welded construction for durability• Promotes versatility of forklift trucksDouble Fork Beams (DFB)Note: Swivel hook shown, fixed hook also available.25FEATURES• Vertical adjustability in 5 increments up to 40°, 6' 4" maximum height• Telescoping boom for versability • T-Pin locks boom into position • Handle on end for easy extension of boom• Swivel hooks with latch are standard• Restraining chain with grab hook standard reachFORK LIFT ACCESSORIESPivoting Fork Lift Booms (PFLB)26FEATURES• Non-conductive for lifting industrial size fork lift or similar batteries• Up to 70% lighter than other beams• Available for single or multiple size batteries• Heavy duty capacities of 4,800 lbs. and 7,000 lbs.• Acid resistant coated polyester straps and hooks • 36" standard spread - custom lengths available • Swivel hooks standardFORK LIFT ACCESSORIESFiberglass Battery Lifting Beam (BLB)Fixed Length (BLBF)Adjustable (BLBA)Optional J HooksAvailable in place of swivel hooksNote: Maximum spread range is 12"* Add a "J" to Part No. for Optional J Hooks27FEATURES• Low Headroom, 18.3"• Adjustable to handle batteries of different lengths • Non-conductive beam• Acid-resistant, coated polyester straps with either swivel or J-hookSPECIALTY BEAMSBattery Lifting Beam (BLBLHA)Low Headroom, AdjustableJ Hooks StandardSwivel Hooks Available28FEATURES• Chain cannot be removed from the master control plate, assuring the capacity rating will not be compromised• Alloy steel master control plate for strength and reliability • Each assembly serialized for traceability• Complies with OSHA - proof tested and certified• Grade 100 chain provides approximately 25% higher capacities than our previous Adjust-A-Links - replaces larger, more expensive slings• New angled plate design reduces bending torque on chain and plate - reduces wear and extends sling life• Wider top bearing surface reduces wear to both plate and crane hook• Versatile - one sling does many jobs• Using two Adjust-A-Links on the same crane hook eliminates the need for expensive triples and quads• Heat treated alloy steel construction for long sling life• Yellow powder coating on master plate and hooks prevents rust – extends sling life• More compact plate design fits larger hooks for easier rigging • Less bulky than typical double adjustable chain slings • High visibility yellow fittings make assembly easy to spot• Easily adjustable to accommodate a wide range of applications • No time wasted searching for just the right slingSPECIALTY SLINGSAdjust-A-LinkThe adjustable, two leg chain slingSingleDoubleBasketNever exceed rated capacities.Chain must be seated at the base of adjusting slot of the Master Control Link.29FEATURES• Easily adjust the legs for a level lift of unbalanced and non-symetrical loads• Can be locked in place for repetitive lifts • Use in pairs for 4 point lifts• Can be used as top rigging for spreader beams • Great as rigging to move machinerySPECIALTY SLINGSAdjust-A-LegThe adjustable, two leg wire rope sling* Reach should be a length of 70% or greater of the distance between pick up points.Level lifting of non-symetrical loads where lift points are not equidistant from center of gravity.Operation:For a level lift, adjust the leg lengths so that the master plate is above the approximate center of gravity. Test position by lifting only until one end of the load is raised. Lower and reposition master plate and legs for another test. Repeat until load raises without tilting. Adjust-A-Leg must be loaded to at least 10% of rated capacity before legs will fully lock into place.Level lifting of symetrical loads where lift points are not equidistant from center of load.Lifting of any load at an angle.Typical Applications30FEATURES• Balanced design allows for easyrolling, even under load•Simple bolt together construction•Includes 4 steel swivel casters• Easy set-up and maintenance GANTRY CRANESFixed Steel (H90)3132FEATURES• Balanced design allows for easy rolling, even under load• Simple bolt together construction • Includes 4 steel swivel casters • Easy set-up and maintenance• Height adjustable in 1 ft. incrementsGANTRY CRANESAdjustable Steel (K90)3334FEATURES•Light-weight Aluminum construction•Balanced design allows for easy rolling,even under load•Simple bolt together construction•Includes 4 poly-coated swivel casters•Easy set-up and maintenance GANTRY CRANESFixed Aluminum (HA90)35FEATURES• Light-weight Aluminum construction • Balanced design allows for easy rolling, even under load• Simple bolt together construction • Includes 4 poly-coated swivel casters • Easy set-up and maintenance• Height adjustable in 6 in. incrementsGANTRY CRANESAdjustable Aluminum (KA90)Manufacturing and Warehousing in:AtlantaChicago Houston Las VegasHeadquarters, Customer Service & Manufacturing:1909 McFarland Dr.Landisville, PA 17538-1810800-909-1964FAX: 717-898-1215E-Mail:*********************CustomerService:****************************Cat. LD-2010 Integra 10M 110LIFTING DEVICES RETURN POLICY1. Items to be returned MUST BE UNUSED and in like new condition.2. An RGA number must be obtained from our Customer Service Agents. No unauthorized returns will be accepted.3. Freight for returns must be prepaid by the customer to the location designated by our Customer Service Agents.4. Requests for returns must be made within 30 days of the original shipment date.5. A 25% restocking charge will apply to all authorized returns.6. Credit will be issued after receipt, inspection and acceptance.7.Custom ordered or modified items may not be returned.。
BXB(原XBD)保护箱使用说明书(2010版)
7、保护功能及参数 7.1 短路保护
短路整定值 Iz=保护箱额定电流（见铭牌）×短路倍数， 短路倍数分别选择为：1、2、3、4、5、6、7、8、9、10 等， 短路保护动作时间：小于 0.1S。(≥1.2 倍整定值时) 7.2 过载保护
过载整定值 Iz=保护箱额定电流（见铭牌）×过载倍数， 过载倍数分别选择为：0.2、0.3、0.4、0.5、0.6、0.7、0.8、
9.2.2 按“菜单”键，进入菜单选项， 屏显示如图七 9.2.3 按“功能”或“调整”键，移 动光标到相应项，按“确认”键，进 入相应项，后根据提示进行操作。 9.2.4 例如：参数整定 （1）选定“参数整定”项，按“确认”
键，屏显示图八。 （2）输入密码：按“确认”键，系 统默认是 0，并且自动移到下一位。按 “功能”键，数字按升序循环变化，按 “调整”键，数字按降序循环变化，按 “复位”键返回上一位。密码（001234 输入完成后，按“确认”键确认，显示
500 800 1200 300 400 600
3300
500 800 300 400
5.2 绝缘水平（见表 2） 表2
主回路额定绝缘电压 V
1140 3300
工频试验电压值 (交流有效值)V
4200 1200
6、结构及工作原理 6.1 结构
主要有隔爆箱体、接线腔、引线装置、综合保护器、电压 互感器、电流互感器、主接线子等组成。见图一、图二 6.2 工作原理
本公司免费维修。超过保修期，或因用户使用不当出现故 障，需本公司维修时，收取相应的配件费或成本费。 13.4 免费提供技术服务。
9
使用前请认真阅读使用说明书
BXB 系列产品电气元件明细表
主机型号：BXB – 3300（1140）V 系列矿用移变低压侧保护箱
B10系列说明书
目录1．概述................................. 错误！未定义书签。
2. 技术指标............................. 错误！未定义书签。
3．功能与型号分类....................... 错误！未定义书签。
4．传感电缆总成......................... 错误！未定义书签。
5．显示与按键.. (3)6. 参数设置............................. 错误！未定义书签。
7．4~20mA电流输出型(E型)............... 错误！未定义书签。
8．RS485/232通讯型(F型).. (11)9．现场故障处理小常识 (11)10．配件与订货 (12)11. 安装示意图 (13)12．接线图 (14)13．服务 (16)1. 概述LD-B10-10系列干式变压器温度控制器(简称温控器)是专为干式变压器安全运行设计的一种智能控制器。
该温控器采用单片机技术，利用预埋在干式变压器三相绕组中的三只铂热电阻来检测及显示变压器绕组的温升，能够自动启停冷却风机对绕组进行强迫风冷，并能控制超温报警及超温跳闸输出，以保证变压器运行在安全状态。
2. 技术指标2.1 测量范围： -30.0℃～240.0℃2.2 测量精度：精度等级 1级(温控器0.5级，传感器0.5级)分辨率 0.1℃2.3 使用条件：环境温度 -20℃～+55℃相对湿度 < 90％(25℃)电源电压 AC220V(+10％，-15%)或DC24V(+10％，-15%)(订货前需说明电源电压大小，否则以AC220V为准)电源频率 50HZ或60HZ(±2HZ)2.4 温控器功耗：≤8W2.5 执行标准: 生产标准： JB/T7631-2005《变压器用电子温控器》通过的认证：ISO9001：2008国际质量管理体系认证通过的试验：IEC61000-4：2002国际标准GB/T17626-2008《电磁兼容试验和测量技术》标准2.6 继电器触点输出：风机触点容量：10A/250VAC控制输出容量：5A/250VAC；5A/30VDC（阻性）2.7 Pt100传感器引线采用三线制，其探头尺寸：Ф3mm×30mm或Ф4mm×40mm 2.8 温控器外型尺寸：80mm×160mm×100mm(高×宽×深)嵌装开孔尺寸：76+1mm×152+1mm(高×宽)3. 功能与型号分类型 号功 能LD-B10-10D(常规型)三相巡回测量；三相巡回显示/最大值显示及两种功能相互切换；输入开路及故障自检显示并输出；冷却风机自动启停输出；超温报警显示并输出；超温跳闸显示并输出；风机手动/自动控制两种状态显示、输出及相互切换；各通道显示值数字补偿；“黑匣子”功能；风机定时启停控制功能；输出状态检测。
最全钢芯铝绞线技术参数表
最全钢芯铝绞线技术参数表1标准技术参数···················································································································错误!未定义书签。
JL/G1A-50/30-12/7 标准技术参数··············································································错误!未定义书签。
GTAS-30B说明书(印刷版)
目录第一章概述1.1产品介绍 (1)1.2产品外观 (2)1.3与安全有关的符号说明 (3)1.4警告标志的内容 (4)1.5安全注意事项 (4)1.6到货检查 (7)第二章产品规格2.1 驱动器规格 (8)2.2电机规格 (9)2.3隔离变压器 (14)第三章安装3.1 环境条件 (15)3.2 伺服驱动器安装 (16)3.3伺服电机安装 (18)第四章接线4.1标准接线 (20)4.2端子功能 (22)4.3 I/O 接口原理 (26)4.4 伺服电机接线 (29)第五章显示与操作5.1键盘操作 (31)5.2. 监视方式 (32)5.3 参数设置 (35)5.4 参数管理 (36)5.5 速度试运行.................................................................. .39 5.6 JOG运行.. (39)5.7电机测试 (40)5.8 其它 (40)第六章通电运行6.1 电源的连接 (41)6.2 通电试运行 (43)6.3 参数调整 (45)第七章参数7.1 参数一览表 (48)7.2 参数功能 (50)第八章报警与处理8.1 报警一览表 (59)8.2 报警处理方法 (60)第九章常见问题9.1 常见问题报警.............................................................. ..67 9.2 频繁出现Err-15、Err-30、Err-31、Err-32报警.. (67)9.3 型号代码参数与电机对照表 (68)第一章概述1.1 产品简介：随着交流伺服技术的成熟稳定，产品性能不断提高，适应工业控制向高速度、高精度、高效率、数字智能化方向发展，同时随着伺服产品性价比的不断提升，伺服控制替代步进控制已成为产业发展趋势。
交流伺服技术已从军工航空航天领域广泛深入地渗透到各行各业，广泛应用于数控机床、纺织机械、轻工机械、网版印刷、包装机械、自动生产线等自动化领域。
最全铝包钢芯铝绞线技术参数表
最全铝包钢芯铝绞线技术参数表1 标准技术参数 (1)1.1 JL/LB20A-70/40-12/7标准技术参数 (1)1.2 JL/LB20A-95/55-12/7标准技术参数 (6)1.3 JL/LB20A-120/25-7/7标准技术参数 (11)1.4 JL/LB20A-150/35-30/7标准技术参数 (16)1.5 JL/LB20A-185/30-26/7标准技术参数 (20)1.6 JL/LB20A-240/30-24/7标准技术参数 (25)1.7 JL/LB20A-300/25-48/7标准技术参数 (30)1.8 JL/LB20A-300/40-24/7标准技术参数 (35)1.9 JL/LB20A-300/50-26/7标准技术参数 (40)1.10 JL/LB20A-400/35-48/7标准技术参数 (45)1.11 JL/LB20A-400/50-54/7标准技术参数 (50)1.12 JL/LB20A-630/45-45/7标准技术参数 (55)1.13 JL/LB20A-630/55-48/7标准技术参数 (60)2 项目需求部分 (65)2.1 货物需求及供货范围一览表 (65)2.2 图纸资料提交单位 (67)2.3 工程概况 (67)2.4 使用条件 (68)2.5 项目单位技术差异 (68)3 投标人响应部分 (69)1 标准技术参数投标人应仔细阅读货物需求及供货范围一览表，并认真逐项填写所招标规格的铝包钢芯铝绞线技术参数响应表中“投标人保证值”，不能以“响应”两字代替，不允许改动标准参数值。
如有偏差，请填写技术偏差表。
1.1 JL/LB20A-70/40-12/7标准技术参数1.1-1 JL/LB20A-70/40-12/7铝包钢芯铝绞线技术参数响应表17.1×101.1-2 JL/LB20A-70/40-12/7 铝单线技术参数响应表1.1-3 JL/LB20A-70/40-12/7 铝包钢线技术参数响应表（LB20A）1.2 JL/LB20A-95/55-12/7标准技术参数1.2-1 JL/LB20A-95/55-12/7铝包钢芯铝绞线技术参数响应表17.1×101.2-2 JL/LB20A-95/55-12/7 铝单线技术参数响应表1.2-3 JL/LB20A-95/55-12/7铝包钢线技术参数响应表1.3 JL/LB20A-120/25-7/7标准技术参数1.3-1 JL/LB20A-120/25-7/7 铝包钢芯铝绞线技术参数响应表19.7×101.3-2 JL/LB20A-120/25-7/7 铝单线技术参数响应表1.3-3 JL/LB20A-120/25-7/7 铝包钢线技术参数响应表（LB20A）1.4 JL/LB20A-150/35-30/7标准技术参数1.4-1 JL/LB20A-150/35-30/7铝包钢芯铝绞线技术参数响应表19.3×101.4-2 JL/LB20A-150/35-30/7铝单线技术参数响应表1.4-3 JL/LB20A-150/35-30/7 铝包钢线技术参数响应表（LB20A）1.5 JL/LB20A-185/30-26/7标准技术参数1.5-1 JL/LB20A-185/30-26/7 铝包钢芯铝绞线技术参数响应表20.1×101.5-2 JL/LB20A-185/30-26/7 铝单线技术参数响应表1.5-3 JL/LB20A-185/30-26/7 铝包钢线技术参数响应表（LB20A）1.6 JL/LB20A-240/30-24/7标准技术参数1.6-1 JL/LB20A-240/30-24/7铝包钢芯铝绞线技术参数响应表20.6×101.6-2 JL/LB20A-240/30-24/7 铝单线技术参数响应表1.6-3 JL/LB20A-240/30-24/7铝包钢线技术参数响应表（LB20A）1.7 JL/LB20A-300/25-48/7标准技术参数1.7-1 JL/LB20A-300/25-48/7铝包钢芯铝绞线技术参数响应表1.7-2 JL/LB20A-300/25-48/7 铝单线技术参数响应表1.7-3 JL/LB20A-300/25-48/7 铝包钢线技术参数响应表（LB20A）1.8 JL/LB20A-300/40-24/7标准技术参数1.8-1 JL/LB20A-300/40-24/7铝包钢芯铝绞线技术参数响应表20.6×101.8-2 JL/LB20A-300/40-24/7 铝单线技术参数响应表1.8-3 JL/LB20A-300/40-24/7 铝包钢线技术参数响应表（LB20A）1.9 JL/LB20A-300/50-26/7标准技术参数1.9-1 JL/LB20A-300/50-26/7 铝包钢芯铝绞线技术参数响应表20.1×101.9-2 JL/LB20A-300/50-26/7 铝单线技术参数响应表1.9-3 JL/LB20A-300/50-26/7 铝包钢线技术参数响应表（LB20A）1.10 JL/LB20A-400/35-48/7标准技术参数1.10-1 JL/LB20A-400/35-48/7铝包钢芯铝绞线技术参数响应表21.2×101.10-2 JL/LB20A-400/35-48/7 铝单线技术参数响应表。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
A
P
A SIZE CODE 0603 1206 2010 2512
±0.2 mm or ±0.008''
B
±0.2 mm or ±0.008''
W
±0.3 mm or ±0.012''
F
±0.1 mm or ±0.004''
E
±0.1 mm or ±0.004''
P
±0.1 mm or ±0.004''
Reel Dimensions in Inches
A ø7 ±0.08 ø13 ±0.08 B ø2.0 min. ø4.0 min. C 5.0 ±0.02 5.0 ±0.3 D 0.83 ±0.03 0.83 ±0.03 E 0.08 ±0.3 0.08 ±0.3 W 0.35/0.50 ±0.06 0.35/0.50 ±0.06 t 0.08 ±0.02 0.08 ±0.02
EIA Code-E24 Values
EIA Code-E96 Values 10.0 14.7 21.5 31.6 46.4 68.1 10.2 15.0 22.1 32.4 47.5 69.8 10.5 15.4 22.6 33.2 48.7 71.5 10.7 15.8 23.2 34.0 49.9 73.2 11.0 16.2 23.7 34.8 51.1 75.0 11.3 16.5 24.3 35.7 52.3 76.8 11.5 16.9 24.9 36.5 53.6 78.7 11.8 17.4 25.5 37.4 54.9 80.6 12.1 17.8 26.1 38.3 56.2 82.5 12.4 18.2 26.7 39.2 57.6 84.5 12.7 18.7 27.4 40.2 59.0 86.6 13.0 19.1 28.0 41.2 60.4 88.7 13.3 19.6 28.7 42.2 61.9 90.9 13.7 20.0 29.4 43.2 63.4 93.1 14.0 20.5 30.1 44.2 64.9 95.3 14.3 21.0 30.9 45.3 66.5 97.6 Add 4 digit multipler Examples: 1130= 113 Ohms 1871= 1.87K Ohms 6193= 619K Ohms 19R1= 19.1 Ohms 1R21= 1.21 Ohms
Dimensions in mm Case Code L W 0402 1.0 + 0.05 0.5 + 0.05 0603 1.6 + 0.1 0.8 + 0.15 0805 2.0 + 0.1 1.25 + 0.10 1206 3.2 + 0.15 1.6 + 0.15 2010 5.0 + 0.15 2.5 + 0.15 2512 6.4 + 0.15 3.2 + 0.15
0805 1.65 (0.065") 2.4mm (0.094") 8.0mm (0.315") 3.5mm (0.138") 1.75mm (0.069") 4mm (0.157") 0.75mm (0.030")
Packing Methods;
PACKING
Style CR02 CR03 CR05 CR06 CR20 CR25 (0402) (0603) (0805) (1206) (2010) (2512)
Paper Taping Reel (R) Embossed Taping Reel (K) Bulk Cassette (K) 7" (178mm) 10" (254mm) 13" (330mm) 7" (178mm) 10,000 5,000 5,000 5,000 10,000 5,000 5,000 5,000 10,000 5,000 5,000 5,000 4,000 4,000 50,000 25,000 10,000 5,000 -
0402 0603 0805 1206
-55 - + 125
元器件交易网
Sharma Resistors
Carrier Tape Dimensions;
+ 0.10 φ 1.5 - 0.0 ± 0.1 2.0 ± 0.1 4.0
RoHS Compliant
E
F W B
Tmax
Tmax
0402 0.65 (0.026") 1.1 (0.043") 1.9 (0.075") 2.8 (0.011") 3.6 (0.142")
1.15 (0.045")
8.0mm (0.315") 3.5mm (0.138") 1.75mm (0.069") 2mm (0.079") 0.43mm (0.018")
Reel Dimensions;
Reel Dimensions in Millimeters
A ø178 ±2.0 ø330 ±2.0 B ø50 min. ø100 min. C 13.0 ±0.5 13.0 ±0.5 D 21.0 ±0.8 21.0 ±0.8 E 2.0 ±0.8 2.0 ±0.8 W 8.8/12.8 ±1.5 8.8/12.8 ±1.5 t 2.0 ±0.5 2.0 ±0.6
T Max 0.35 + 0.05 0.45 + 0.10 0.55 + 0.10 0.55 + 0.10 0.55 + 0.15 0.55 + 0.15
e 0.25 + 0.15 0.30 + 0.1 0.40 + 0.2 0.50 + 0.25 0.60 + 0.2 0.60 + 0.2
Power Derating Curve
Power Ratings Table (Values above 10 M Ohms are available upon request)
SIZE Rate Power Rate Current M a x i m u m at 70C of Jumper Working A Voltage Vw 1/16 50 1/10 1/8 1/4 2 2010 2512 3/4 200 1 400 1 50 150 M a x i m u m Temperature Overload Coefficient Voltage of Resistance Vo ppm/C 100 + 100 + 200 100 + 100 + 200 300 + 100 + 200 + 100 + 200 + 100 + 200 + 100 + 200 Combination of Resistance Range of Tolerance F (+1%) J (+ 5%) (E96) (E24) 10 Ohms-562 K Ohms 1 Ohm-9.76 Ohms 10 Ohms - 1 M Ohms 10 Ohms-1 M Ohms 1 Ohm - 9.76 Ohms 1 Ohm- 10 M Ohms 10 Ohms - 1 M Ohms 1 Ohm - 9.76 Ohms 1 Ohm - 10 M Ohms 10 Ohms-1 M Ohms 1 Ohm - 9.76 Ohms 10 Ohms - 1 M Ohms 1 Ohm - 9.76 Ohms 10 Ohms - 1 M Ohms 1 Ohm - 9.76 Ohms 1 Ohm - 10 M Ohms 1 Ohm - 10 M Ohms 1 Ohm - 10 M Ohms Operating Temperature Range C
• • • • •
Case Dimensions Table
SPECIFICATIONS Resistance Range: 1 Ohm to 10 M Ohms for E24 values(5%) 1 Ohm to 1 M Ohms for E96 values(1%) Rated Power: 1/16 to 1W at 70°C (Please see Power Derating Curve) Rated Voltage: Rated Power x Nominal Resistance. Overload Voltage: Please refer to Power Ratings Table. Temperature Coefficient: ± 100 ppm or ± 200 ppm per °C. Temperature Range: -55°C to +125°C with derating above 70°C Tolerance: ± 5% or ±1% (Special tolerance upon request.). Load Life: The component will be subjected to 1000 hours of testing at rated voltage and 70° C, with duty cycles of 1.5 hours ''on'' and 0.5 hours ''off''. After the test the Resistance change will remain within ±3% of the initial value + 0.1 Ohm for values above 1 M Ohm and 5% for values less than 1 M Ohm. Resistance to Soldering Heat: The component can be subjected to a soldering temperature of 270 °C for 10 seconds. After the test the Resistance change will remain within ±3% + 0.1 Ohms. Tape, Reel and Packing Specifications