Alkyd Topcoat 醇酸保养面漆(1T3)

合集下载

-如何加快轨道车辆的漆面维修-亮克威泽工业快速修补漆解决方案

公司产品实例--地铁（水性涂料）
青岛3号线
郑州1号线增购
大连轻轨
Lankwitzer Premium Coatings
公司产品实例--转向架
CRH3转向架
地铁转向架
242构架
中华之星转向架
Lankwitzer Premium Coatings
公司产品实例--车辆内装部件
动车组内饰亮克威泽的工业涂料已经在车辆内饰中得到广泛应用！
研发背景
车辆及部件在生产组装和使用过程中，由于环境、操作方式或者其他方面的影响，总会造成产品表面出现各方面问题，如脱漆、鼓泡、污染、磕碰刮痕等问题。
漆面问题的产生不仅影响美观，而且如果不能够及时修复，问题区域还将进一步扩大，最终导致更严重的漆面损坏。
如何进行漆面的修补一直是困扰各主机厂及地铁使用者的问题。
Lankwitzer Premium Coatings
公司产品实例--汽车零部件及轮毂
Lankwitzer Premium Coatings
公司产品实例--UV固化产品
Lankwitzer Premium Coatings
亮克威泽部分客户
亮克威泽的部分客户
塑料漆汽车及现代交通
重防腐特殊产品
Lankwitzer Premium Coatings
传统修补方式及问题
目前，车辆漆面出现问题时，一般都采用传统的方式进行修补，现场需要干净气源、电力、调漆工具设备，并且传统修补存在以下几点问题：
LLaannkkwwiittzzeerr PremiuummCCooaattininggss
亮克威泽发展历程
1952 创立于德国柏林 1990 开始在波兰，捷克，斯洛伐克，匈牙利，俄罗斯，乌克兰和白俄罗斯设立

醇酸漆和聚氨酯漆区别？

醇酸漆和聚氨酯漆是两种常见的涂料，它们在成分、特性和用途上存在一些区别。

醇酸漆（Alkyd Paint）是由醇酸树脂、溶剂、颜料和辅助成分组成的涂料。

它有良好的附着力和耐磨性，干燥迅速，并且可用于室内和室外的木材、金属和其他表面。

醇酸漆具有良好的耐候性和耐久性，能够提供光泽丰富的表面。

它还具有一定的弹性，能够适应温度和湿度的变化。

醇酸漆常用于家具、门窗、木制品和金属表面的涂装。

聚氨酯漆（Polyurethane Paint）是一种由聚氨酯树脂、溶剂、颜料和添加剂组成的涂料。

聚氨酯漆具有优异的耐磨性、耐划伤性和耐化学物质侵蚀性。

它的硬度较高，干燥后形成坚固耐用的涂层。

聚氨酯漆表面平滑、光泽，且具有出色的抗紫外线性能，能够抵御日晒和氧化。

因此，它通常适用于需要高强度和高耐久性的表面，如汽车、船只、机械设备以及室内地板等。

综上所述，醇酸漆和聚氨酯漆在成分、特性和用途上有所区别。

醇酸漆适用于木材和金属表面，具有良好的耐候性和耐磨性；而聚氨酯漆更适用于需要高强度和耐久性的表面，如汽车、船只和机械设备。

请根据具体需求选择合适的涂料。

家具英语词汇大全

automatic wide-belt sander 宽带砂光机
B
Back and arm impact test machine 椅背扶手冲击试验机
balance cut-off saw 平衡截断锯
Band and circular saw sharpener 带锯圆面积锯两用锉锯机
Band resaw 再分带锯机
Glass unit and container 玻璃容器制品
Glazed door 玻璃门
H
Hall furniture 厅房家具
Hat and coat stand 衣帽架
Headboard 床头
Heirloom quality furniture 祖传家具
High bed 儿童高脚床（不带屉柜）
Bunk bed 双层床
C
Cabin bed 儿童多功能床
Cabin furniture for ships 船用家具
Canopy bed 带天篷的床，四柱床
CD-video storage cabinet边音响组合柜
Chair with castors 脚轮椅
Changing table 可调桌
Margined flush door 镶边平板门
Mattress 床垫，席梦思
Mediumback executive chair 中背办公椅
Metal furniture金属家具
Mirror door 玻璃门
Mirror for chest of drawers 多屉柜梳妆镜
Multi-purpose sofa 多用沙发
Kitchen fitment 厨房固定家具

jotun hardtop one湿固化丙烯酸聚硅氧烷面漆(0t2) 产品技术说明书

湿固化丙烯酸聚硅氧烷面漆 (0T2)这是一款单组份,湿气固化的丙烯酸聚硅氧烷涂料。

本产品不含异氰酸酯,在火工/焊接或发生火灾事故时不产生二异氰酸酯. 有优异的保光性和保色性。

它是一款高固体含量的产品。

此产品可在固化的任何阶段进行复涂。

施工方式为刷涂和辊涂。

施工性能良好且不易干喷。

在大气环境下作为面漆使用。

认证和证书本产品对绿色建筑标准得分会有贡献，请参见绿色建筑标准章节。

颜色可采用工业调色机体系（MCI）进行调色典型用途船舶漆领域：推荐用于干舷、甲板和船的上层建筑。

工业保护漆领域：推荐用于近海环境，如炼化厂、发电站、桥梁和建筑。

性能测试/标准描述光泽度 (GU 60 °)ISO 2813VOC - 美国 / 香港US EPA 方法 24 (测试值)(CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)VOC- 欧盟IED (2010/75/EU) (理论值)所列数据是基于工厂批量生产的产品，因颜色不同会有些许变化。

闪点ISO 3679 方法 130 ℃有光（70-85）245 克/升190 克/升密度1.4kg/l 光泽描述: 根据佐敦功能涂料的定义理论值VOC- 欧盟EU VOC Directive 2004/42/CE (ISO 11890-2) (经测试)VOC- 中国GB/T 23985-2009 (经测试)243 克/升159 克/升湿膜厚度理论涂布率6080121001307.2微米微米平方米/升---该产品可用以下方式施工喷涂:无气或空气喷涂均可使用。

刷涂:建议. 注意要达到特定的干膜厚度。

辊涂:建议. 注意要达到特定的干膜厚度。

稀释剂:佐敦2号稀释剂当基材温度低于5摄氏度时，使用佐敦7号稀释剂可提高流平性。

通常不需要稀释。

在极端环境下施工请咨询当地的佐敦代表。

稀释时请勿超过当地的环境法规要求。

注意：当韩国VOC法规《韩国清洁空气保护法》和它对应的稀释限值与推荐稀释体积不同时，以前者为准。

JOTUN佐敦油漆比重表

佐敦工业防腐漆产品一览表环氧富锌底漆Barrier ZEP 环氧富锌底漆54 1.79A:1.92 B:0.94混合1.8140/50/9013.5/10.8/64h No.178:01415可以和大部分高性能涂料配合使用，提高防腐性能。

中间漆用 Penguard expressBarrier 环氧富锌底漆0BX 53 2.5A:2.98 B:0.92混合2.4525/40/9021.2/ 13.3/5 1.5h No.173:012417.5可以和大部分高性能涂料配合使用，提高防腐性能.(符合SSPC油漆20之2级和ISO 12944的成分要求。

也可根据订单采用符合ASTM520（之）II类的锌粉定制。

)Barrier 80环氧富锌底漆61 2.53A:3.07 B:0.94混合2.5440/50/9015.3/12.2/6.8 1.5h No.173:1129环氧富锌底漆Barrier 80是一种高锌含量双组分环氧富锌底漆，符合SSPC标准-20油漆中锌粉含量等级2和国际标准ISO 12944有关锌粉底漆的成分要求。

也可以根据客户要求，采用符合ASTM D520标准的II类锌粉定制Barrier 77环氧富锌底漆OBZ 53 2.18A:2.70 B:0.92混合2.2525/50/7521.2/10.6/7.1 1.5h No.173:01249能和大多数油漆配套，增强耐久性。

(符合SSPC油漆20之2等级的成分要求。

也可以根据定单采用符合ASTM D520（之）II类型的锌粉。

)Barrier 77 CN 环氧富锌底漆 0GY 53 2.18A:2.70 B:0.92混合2.2625/50/7521.2/10.6/7.11h No.173:112 6.75/2.25环氧富锌底漆0GY（Barrier 77 CN）是一种双组分环氧富锌底漆，符合SSPC标准-20油漆中锌粉含量等级2有关锌粉底漆成分的要求。

凯特高固含环氧填充剂密封漆产品说明

Kem cati-coat® HS
Epoxy filler/SEALER 凯特高固含环氧填充剂/密封漆
A 组份 B 组份
施工指南
B42W400 B42V401
本白色固化剂
4.21
施工程序
被涂表面必须按前述表面处理要求准备完毕。
施工技巧
喷涂时，应使喷枪每次喷涂的宽度与前一次的重叠50%，以避免漏涂和针孔。如果必要，可采用正确角度下的交叉喷涂。
混合比：
双组分 1:1 按体积
建议每层涂布率：
最小
最大
湿膜厚度微米
350
700
干膜厚度微米
250
500
涂布率 (m2/L)
1.48
2.8
理论涂布率 (m2/L) @ 25 微米干膜厚度
28.2
注意：刷涂或滚涂时可能需要涂装多层才能达到最大厚度和理想效果。
干燥时间表，湿膜375微米：
指触干：重涂间隔：
橡皮刮刀稀释 ��根据需要，最多至体积的12.5%
如果没有上述特定的施工设备，可用相同类型的代替。
白色金属近白色金属商业级喷砂清扫级喷砂
手动工具清洁
电动工具清洁
表面状况
生锈蚀点及生锈生锈蚀点及生锈
表面处理标准 ISO 8501-1 BS7079:A1 Sa 3 Sa 2.5 Sa 2 Sa 1 C St 2 D St 2 C St 3 D St 3
退还货款，由公司视情况而定。除此之外，宣伟(Sherwin-Williams)不作其他任何形式的承诺和保证，包括可销售性以及对于某一特定用途的适用性，无论明示或暗
示，还是依现行法律规定或其他情况。

Acrylic Finish Topcoat说明书

moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture
content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.) Spot prime with
• Ensure good ventilation during application and drying.
• When applying paint, it is advisable to wear eye protection.
• In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
Gloss / Soft
Matt
Concrete and plastered wall
1 Litre, 5 Litres, 15 Litres
Composition
Pigment
Binder
Thinner
: Mainly Titanium Dioxide, Iron Oxide, Carbon Black and Organic Pigments
: ~ 36%
: Up to 36 months in tight sealed container
Application Method
Brush / Roller
Conventional Air Spray

涂料行业专业用词英汉对照表

冲淡比 ; reduction ratio
饱和度 ; saturation
明暗调整色 ; shade
光谱匹配 ; spectral match
标准色浓度 ; standard depth of shade
标准照明体 ; standard illuminant
底色、薄层色 ; undertone
竹排笔,排刷
breathable
可呼吸性
brochure
产品说明书
brush
漆刷
brush mark
刷痕
calcium carbonate
碳酸钙,滑石粉
can
罐
can opener
开罐器
car-refinish
汽车修补漆
ceiling paint
天花板漆
cellar paint
地下室漆
cement rendering
英语
涂料行业中译
abrasion resisting
耐磨擦功能
acrylic
丙烯酸,常用成膜物料,
additives
助剂, 添加剂
adhesion
附着力
aerosol
自动喷漆
air assist airless spray
空气辅助无气喷涂
airless spray
无气喷涂
alkali resisting primer 抗碱底漆
回粘aftertack干燥不发粘的漆膜表面随后又呈现发粘的现象汽车涂料相关术语油漆?paint?面漆?enamel?沥漆区?drainarea?调漆?paintmixing?浸涂?dipcoatng?涂底漆?priming?补漆?paintrepair?喷面漆?topcoating?热喷漆?hotspray?打腻子?puttying?老化?weathering?人工干燥?artificialdrying?自然干燥?airdry?干打磨?drygrinding?去油脱脂?degreasing?碱法脱脂?alkalinedegreasing?蒸气脱脂?vapordegreasing?去离子水?deminwater?除锈?derusting?酸洗?pickling?水洗?rinse?热水清洗?hotwaterrinse?电泳涂层?electophoreticcoating?喷丸处理?shotblasting?磨光抛光0?burnishing?出光?glaring?罩光?glazing?磷化预处理?phosphatingpretreatment?薄膜磷化处理?thinamorphousphosphating?湿碰湿?wettowet?钝化?passivating?结皮现象?skinning?起皱?wrinkling?遮蔽?masking?凉干?flashoff?气幕?airseal?喷漆室?booth?干式喷漆室?dryspraybooth?水过滤式喷漆室?waterwashspraybooth?下吸式喷漆室?downdraftspraybooth?侧抽风喷漆室?sprayboothsideexhaust?油漆调制室?paintmixingroom?打磨间?scuffsandbooth?通过式烘干室?passingthroughtypebakingoven?桥式烘干室?bridgetypebakingoven?辐射对流烘干室?jointradiationconvectionoven?浸漆设备?dipequipment?浸漆槽?diptank?循环槽?recirculatingtank?自动喷漆机?automaticsprayer?热喷漆机?flowcoatingequipment?淋漆设备?flowcoatingequipment?手工浸漆设备?handdipequipment?无空气喷涂设备?airlessspraye

油漆涂料英语词汇

AAccelerate 促进剂Accelerator硬化剂，接触剂Acetic acid 醋酸Acetone 丙酮Achromatic color 无彩色Acid stain 丙烯酸树脂Acrylic丙烯酸Acrylics acid resin 丙烯酸（类）树脂Acrylonitrile butadiene styrene resin ABS树脂，丙烯腈—丁二烯—苯乙烯树脂Active agent 活性剂Additive 添加剂Additive mixture 加色混合Adhesive 胶粘剂Adhesive solvent 胶（料）溶剂Adjacent color 类似色Advancing color 进出色Aerosol spraying 简易喷涂After image 残象Air drying 常温干燥Airless spraying 无气喷涂Alcohol stain 酒精着色剂Alert color警戒色Alkyd resin 醇酸树脂Alligatoring 漆膜龟裂Amount of spread 涂胶量Anticorrosive paint 防锈涂料Antifouling paint 防污涂料Antique finish 古式涂料Automatic spraying 自动喷涂BBaking finish 烤漆喷涂Base boat 底漆Blistering 小泡Blushing 白化Body varnish 磨光漆Brilliant 鲜艳的Brushing 刷涂Brushing mark/streak 刷痕Bubbling 气泡Button lac 精致虫胶CCafé咖啡色Carbamide resin adhesive 尿素树脂胶Catalyst 催化剂，触媒，接触剂Chalking 粉化Cherry 樱桃色Chipping 剥落Chromatic color 有彩色Chromaticity 色度Chromaticity coordinates 色度坐标Chromaticity diagram色度圆Clssing 补漆Clear coating 透明涂层Clear lacquer 透明喷漆Clear paint 透明涂料Coarse particle 粗粒Coating 涂料Cobwebbing 裂痕Cocos 可可色Cold water paint 水性涂料Color blindness 色盲Color conditioning 色彩调节Color harmony 色彩调和Color in oil 片种特（调色用）Color matching 调色Color number 色号(色之编号或代号）Color paint 有色涂料Color reaction 显色反应Color reproduction 色重现Color tolerance 色容许差Compatibility 相容性Complimentary color 补色Consistency 稠厚度Contractive color 收缩色Col color 寒色,冷色Cooling agent 冷却剂Covering power 覆盖力Cracking 龟裂，裂纹Cresol resin adhesive 甲酚树脂胶Crimping 皱纹Cure 硬化Curing agent 固化剂Curing temperature 固化温度DDark 暗Deep 深Degumming 脱胶Dewaxed shellac 胶蜡虫胶Diluent 稀释剂，冲淡剂Dilution ratio 稀释比例Dingy 浊色Dipping 浸渍涂层Dipping treatment 变色Discoloring 变色Discord 不调和色Drier 干燥剂Dry rubbing 干磨Drying time 干燥时间Dulling 失光Dusting 粉化EEgg—shell 埴孔亚光，显孔亚光electrostatic spraying 静电涂装emulsion adhesive 乳化胶emulsion paint 乳化涂料enamel 色漆,磁漆end—coating 端面涂层end—gluing 端面胶合epoxy finish环氧效果epoxy resin glue环氧树脂胶ethyl cellulose lacquer乙基纤维素喷漆FFading退色Filler 腻子，埴料，填充剂Finish code 涂料编号Finshing 涂饰Flaking 剥落Flat paint 消光涂料Flatness 消光Floor paint 地板涂料Foam glue 泡沫胶GGelatin 明胶，凝胶Glare 眩目Glue 胶粘剂，胶，胶料Glue and filler bond 动物胶及填料胶结Glue mixer 调胶机Glue spreader 涂胶机Gum 树胶，胶树HHardener 硬化剂Hide 皮胶High solid lacquer 高固体分漆Honey color 蜂蜜色IIlluminant color 光源色JJelly strength 胶质强度Joint strength 胶接强度LLac 虫胶Lac varnish 光漆Lacquer 漆Latex 乳胶Latex paint 合成树脂乳化型涂料Leveling agent 均化剂Light 光亮的Liquid glue 液态胶Long oil varnish 长性清漆Love formaldehyde 低甲醛MMake up paint 调和漆Medium oil varnish 中油度清漆Melamine resin adhesive 三聚氯胺树脂胶，蜜胺树脂胶Melamine resin sheet 三聚氯胺树脂(片)Methyl alcohol 甲醛Multi—color 多彩漆NNatural clear lacquer 清漆N。

金冠鼎汽车漆技术手册说明书

GD-6340塑料底漆
2
GD-20环氧底漆(灰色)
3
GD-6352环氧底漆(灰色)
4
GD-GT20极速中涂漆 / GT20B极速中涂漆(白色)
5
GD-30中涂漆
7
GD-6441快干中涂漆
8
GD-40苏灰士
9
GD-6450苏灰士
10
GD-50填眼灰
11
GD-6460填眼灰
12
GD色漆类
PLUS全效色彩系列2K实色色母
13
PLUS全效色彩系列1K实色色母
14
通用型油性系列2K实色色母
15
通用型油性系列1K实色色母
16
GD清漆类
GD-400清漆套装
17
GD-400PLUS全效快干清漆
18
GD-1000标准清漆
19
GD-2000高固清漆
20
GD-2800皇冠清漆套装
21
GD-6511通用超快干清漆
22
GD-6800PLUS超固化清漆
GOODING Refinish
Professional Refinish System
表现始终如一
Excellent Performance
雅图高新材料股份有限公司
YATU ADVANCED MATERIALS CO., LTD. 地址：中国广东省鹤山市古劳镇三连工业区二区 ADD：Sanlian Industrial Area 2, Gulao, Heshan City,
GD-30中涂漆
产品特性：多用途双组份中涂漆，具有优良的填充性，层间附着力好，耐冲击性、柔韧性等优异性能，可提高面漆的丰满度及光泽度。
适用底材：已硬化并打磨的旧漆膜，各类底漆和原子灰

冠凯帕蒂柔软清洗涂层液说明书

Product #(s) – 4105Material Safety Data SheetFor Emergency Call:CHEM-TEL (800) 255-3924 24 Hour Assistance1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct Name: C hampion Wipe-R-Clean Windshield Washer & De-IcerCAS Number: 67-56-1 / 7732-18-5Recommended Uses: Windshield WashCompany IdentificationManufacturer's Name: CHAMPION BRANDS, LLCAddress: 1001 Golden Drive, Clinton, MO 64735Telephone – General Information: (800) 821-56932. HAZARDS IDENTIFICATIONHazard Classes: Flammable Liquid Category 3Acute Oral Toxicity Category 3Acute Dermal (skin) Toxicity Category 3Acute Inhalation Toxicity Category 3Toxic to Reproduction Category 1BSpecific Target Organ Toxicity (Single Exposure) Category 1 and Category 3Aspiration Hazard Category 1Note: Assigned to classification based on human experienceSignal Word: DANGERHazard Statements:H226 Flammable Liquid and Vapor.H301 Toxic if Swallowed.H304 May be fatal if swallowed and enters airways.H311 Toxic in Contact with Skin.H331 Toxic if Inhaled.H336 May cause drowsiness or dizziness.H360 May Damage Fertility or the Unborn Child – fetotoxic and teratogenic effects.H370 Causes Damage to the Optic Nerve causing blindness if ingested. Precautionary Statements:P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children,P103 Read label before use.P201 Obtain special instructions before use.P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking.P233 Keep container tightly closed.P240 Ground/bond container and receiving equipment.P241 Use explosion-proof electrical lighting and equipment.Product #(s) – 4105P242 Use only non-sparking tools.P243 Take precautionary measures against static discharge.P261 Avoid breathing vapors.P264 Wash thoroughly after handling.P270 Do not eat, drink or smoke when using this product.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves / protective clothing / eye protection.P301 + P310 If SWALLOWED: Immediately call a POISON CENTER or doctor/physician.P331 D o NOT induce vomiting.P330 Rinse mouth.P303 + P361 + P353 If ON SKIN (or hair): Remove/Take of immediately all contaminated clothing.Rinse skin with water/shower.P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a positioncomfortable for breathing.P308 + P311 IF exposed or concerned: Call a POISON CENTER or doctor/physicianP361 + P378 Take off immediately all contaminated clothing and wash it before reuse.P370 + P378 In case of fire: Use dry chemical, CO2, alcohol-resistant foam, and water spray for extinction.P403 + P235 Store in well-ventilated place. Keep cool.P501 Disposal: Dispose of contents/container to a specialized waste disposal plant in accordance with local/regional regulationsHazard Pictograms:3. COMPOSITION/INFORMATION ON INGREDIENTSCAS Num b erComponents Typical WeightPercentageMethanol 22-36% 67-56-1Water 64-78% 7732-18-54. FIRST AIDEyes: If irritation or redness develops, move victim away from exposure and into fresh air. Flush eyes with clean water. If symptoms persist, seek medical attention.Skin: Remove contaminated shoes and clothing and cleanse affected area(s) thoroughly bywashing with mild soap and water. If irritation or redness develops, seek medical attention.Inhalation: If respiratory symptoms develop or other symptoms of exposure develop, move victim away from source of exposure and into fresh air. If symptoms persist, seek medical attention. If victim is not breathing, clear airway and immediately begin artificial respiration. If breathingdifficulties develop, oxygen should be administered by qualified personnel. Seek immediate medical attention.Product #(s) – 4105Ingestion: Aspiration hazard. Do not induce vomiting or give anything by mouth because thismaterial can enter the lungs and cause severe lung damage. If victim is drowsy or unconscious and vomiting, place on the left side with the head down. If possible, do not leave victim unattended and observe closely for adequacy of breathing. Seek immediate medical attention.Note to Physicians: Ethanol significantly decreases the toxicity of methanol because it competes for the same metabolic enzymes, and has been used to treat methanol poisoning.Epinephrine and other sympathomimetic drugs may initiate cardiac arrhythmias in persons exposed to high concentrations of hydrocarbon solvents (e.g., in enclosed spaces or with deliberate abuse).The use of other drugs with less arrhythmogenic potential should be considered. If sympathomimetic drugs are administered, observe for the development of cardiac arrhythmias.Medical Conditions: Exposure to high concentrations of this material may increase the sensitivity of the heart to certain drugs. Persons with pre-existing heart disorders may be more susceptible to this effect (see Note to Physician above).5. FIRE FIGHTING MEASURESSuitable Extinguishing Media: Dry chemical, CO2, water spray or alcohol-resistant foam. .Water spray is recommended to cool or protect exposed materials or structures. Water may be ineffective for extinguishment, unless used under favorable conditions by experienced fire fighters. Carbon dioxide can displace oxygen. Use caution when applying carbon dioxide in confined spaces.Specific Hazards: This material is flammable and can be ignited by heat, sparks, flames or other sources of ignition (e.g., static electricity, pilot lights or mechanical/electrical equipment). Flame is invisible in daylight. Vapors may travel considerable distances to a source of ignition where they can ignite, flashback or explode. May create vapor/air explosion hazard indoors, in confined spaces, outdoors or in sewers. If container is not properly cooled, it can rupture in the heat of a fire. Vapors are heavier than area and can accumulate in low areas.Hazardous Combustion Products: Toxic gases and vapors; oxides of carbon and formaldehyde.Special Firefighting Procedures: For fires beyond the initial stage, emergency responders in the immediate hazard area should wear bunker gear. When the potential chemical hazard is unknown, in enclosed or confined spaces, or when explicitly required by DOT, a self-contained breathingapparatus should be worn. In addition, wear other appropriate protective equipment as conditions warrant (see Section 8). Isolate immediate hazard area and keep unauthorized personnel out. Stop spill/release if it can be done with minimal risk. Move undamaged containers from immediatehazard area if it can be done with minimal risk. Water spray may be useful in minimizing ordispersing vapors and to protect personnel. Cool equipment exposed to fire with water, if it can be done with minimal risk. Avoid spreading burning liquid with water used for cooling purposes.6. ACCIDENTAL RELEASE MEASURESPersonal Precautions: Flammable. Spilling of liquid product will create a fire hazard and may form an explosive atmosphere. Keep all sources of ignition and hot metal surfaces away fromspill/release if safe to do so. The use of explosion-proof equipment is recommended. Stay upwind and away from spill/release. For large spills, notify people down-wind of spill/release, isolateimmediate hazard area and keep unauthorized personnel out. Wear appropriate protectiveequipment including respiratory protection as conditions warrant (see Section 8). See Sections 2 and 7 for additional information on hazards and precautionary measures.Product #(s) – 4105Environmental Precautions: Stop spill/release if it can be done with minimal risk. Prevent spilled material from entering sewers, storm drains, other unauthorized treatment drainage systems, and natural waterways. Use foam on spills to minimize vapors. Use water sparingly to minimizeenvironmental contamination and reduce disposal requirements. If spill occurs on water, notify appropriate authorities. Spills into or upon navigable waters, the contiguous zone, or adjoiningshorelines that cause a sheen or discoloration on the surface water, may require notification of the National Response Center (phone number 800-424-8802).Methods for Containment and Clean-Up: Notify relevant authorities in accordance with allapplicable regulations. Immediate cleanup of any spill is recommended. Dike far ahead of spill for later recovery or disposal. Absorb spill with inert material such as sand, earth or other non-combustible material, and place in suitable container for disposal. If spilled on water remove with appropriate methods (e.g., skimming, booms or absorbents). In case of soil contamination, remove contaminated soil for remediation or disposal, in accordance with local regulations.7. HANDLING AND STORAGEPrecautions for Safe Handling: Keep away from ignition sources such as heat/sparks/open flames – No smoking. Take precautionary measures against static discharge. Non-sparking tools should be used. Wear protective gloves/clothing and eye/face protection. Wash thoroughly after handling.Use good personal hygiene practices and wear appropriate personal protective equipment (see Section 8).Flammable. May vaporize easily at ambient temperatures. The vapor is heavier than air and may create an explosive mixture of vapor and air. Beware of accumulation in confined spaces and low lying areas. Open container slowly to relieve any pressure. Electrostatic charge may accumulate and create a hazardous condition when handling or processing this material. To avoid fire orexplosion, dissipate static electricity during transfer by bonding and grounding containers andequipment before transferring material. The use of explosion-proof equipment is recommended and may be required (see appropriate fire codes). Refer to NFPA-77 and/or API RP 2003 for specific bonding/grounding requirements. Do not enter confined spaces such as tanks or pits withoutfollowing proper entry procedures such as ASTM D-4276 and 29CFR 1910.146. Do not wearcontaminated clothing or shoes. Keep contaminated clothing away from sources of ignition such as sparks or open flames. Use good personal hygiene practice.Conditions for Safe Storage: Keep container(s) tightly closed. Use and store this material in cool, dry, well-ventilated areas away from heat and all sources of ignition. Post area “No Smoking or Open Flame.” Store only in approved containers. Keep away from any incompatible material (see Section 10). Protect container(s) against physical damage. Outdoor or detached storage ispreferred. Indoor storage should meet OSHA standards and appropriate fire codes.8. EXPOSURE CONTROLS/PERSONAL PROTECTIONExposure GuidelinesComponent ACGIH TLV ACGIH STEL OSHA PEL OSHA STELMethanol 200 ppm(Skin) 250 ppm(Skin)200 ppm(Skin)250 ppm(Skin)Product #(s) – 4105Engineering Controls: If current ventilation practices are not adequate to maintain airborneconcentrations below the established exposure limits, additional ventilation or exhaust systems may be required.Specific Personal Protective EquipmentEye/Face Protection: The use of eye protection that meets or exceeds ANSI Z.87.1 isrecommended to protect against potential eye contact, irritation or injury. Depending on conditions of use, a face shield may be necessary.Skin: The use of gloves impervious to the specific material handled is advised to prevent skin contact. Users should check with manufacturers to confirm the breakthrough performance of their products. Depending on exposure and use conditions, additional protection may be necessary to prevent skin contact including use of items such as chemical resistant boots, aprons, arm covers, hoods, coveralls or encapsulated suits. Suggested protective materials: butyl and nitrile rubbers.Respiratory Protection: Where there is potential for airborne exposure above the exposure limits,a NIOSH approved air purifying respirator with an organic vapor cartridge may be used.A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2requirements must be followed whenever workplace conditions warrant a respirator's use. Air- purifying respirators provide limited protection and cannot be used in atmospheres that exceed the maximum use concentration as directed by regulation or the manufacturer’s instructions, in oxygen deficient (less than 19.5% oxygen) situations or under conditions that are immediately dangerous to life and health (IDLH).Use a positive pressure air supplied respirator if there is potential for uncontrolled release, exposure levels are unknown, or any other circumstances where air-purifying respirators may not provide adequate protection.Other Protective Equipment: Eye wash and quick-drench shower facilities should be available in the work area. Thoroughly clean shoes and wash contaminated clothing before reuse.Suggestions provided in this section for exposure control and specific types of protectiv e equipment are based on readily available information. Users should consult with the specific manufacturer to confirm the performance of their protective equipment. Specific situations may require consultation with industrial hygiene, safety, or engineering professionals.9. PHYSICAL AND CHEMICAL PROPERTIES (approximate v a lues)Appearance: Clear, blue liquidOdor: Mild alcoholOdor threshold: 4.2-596 ppmpH: Not applicableMelting/Freezing Point: -97.8˚C /208˚FBoiling point (at 1 atm): 64.7˚C / 148 ˚FFlash Point: 35 ˚C / 9 ˚F (Closed Cup)Auto-Ignition Temperature: 470 ˚C / 878 ˚FEvaporation rate (butyl acetate = 1): 4.1Flammability (solid, gas): Not applicableExplosive Limits: Lower – 6%/ Upper – 36%Vapor Pressure: 92 mmHg @ 20 ˚C / 68 ˚FProduct #(s) – 4105Vapor Density (air = 1): 1.1 @ 15 ˚C / 59 ˚FSpecific gravity (H20 = 1): 0.79 @ 20˚C / 68 ˚FSolubility in water: SolublePartition Coefficient: n-octanol/water: Log P = -0.77Decomposition Temperature: No dataViscosity: 5.81 x 10-7 m2/s @ 40 ˚C / 104 ˚F10. STABILITY AND REACTIVITYStability (thermal, light, etc.): Stable under normal conditions of storage and handling.Conditions to Avoid: Avoid all possible sources of ignition (see Sections 5 and 7).Incompatibility (materials to avoid): Avoid contact with strong acids, bases and oxidizers such as liquid chlorine and oxygen. Contact with these materials may cause a violent or explosive reaction.May be corrosive to lead, aluminum, magnesium and platinum. May react with metallic aluminum or magnesium and generate hydrogen gas. May attack some forms of plastic, rubber and coatings.Hazardous Decomposition Products: Thermal decomposition may release carbon monoxide, carbon dioxide, and formaldehyde.Hazardous Polymerization: Will not occur.11. TOXICOLOGICAL INFORMATIONAcute Toxicity:Product/Ingredient Name Result Species DoseMethanol (major ingredient) LD50 OralLD50 DermalLC50 Inhalation (vapor) RatRabbitRat>2528 mg/kg17,100 mg/kg13.3 mg/l – 6hrNote: Assigned to classification based on human experience and not animal data.Skin Corrosion/Irritation: Causes mild irritation. Repeated exposure may cause dryness orcracking.Serious Eye Damage/Irritation: Causes mild irritation.Signs and Symptoms: High concentrations can cause minor respiratory irritation, headache,drowsiness, dizziness, loss of coordination, disorientation and fatigue. Ingestion can causeirritation of the digestive tract, nausea, abdominal pain, vomiting and visual disturbances ranging from blurred vision to light sensitivity, blindness or death.Skin Sensitization: None reportedRespiratory Sensitization: None reportedGerm Cell Mutagenicity: There is insufficient information available to conclude that methanol is mutagenic.Carcinogenicity: Methanol did not demonstrate carcinogenic effects in rats and mice treated via whole body inhalation at concentrations > 1.3 mg/l in air. There is insufficient informationavailable to conclude that methanol is carcinogenic. It is not listed by NTP, IARC or OSHA.Product #(s) – 4105Reproductive Toxicity: Methanol has produced fetotoxicity in rats and teratogenicity in miceexposed by inhalation to high concentrations of methanol vapors.Specific Target Organ Toxicity (Single Exposure): Methanol ingestion causes damage to the optic nerve causing blindness. May cause drowsiness and dizziness.Specific Target Organ Toxicity (Repeated Exposure): There is insufficient informationavailable to conclude that methanol causes target organ effects from repeated exposure.Aspiration Hazard: May be fatal if swallowed and enters airways.12. ECOLOGICAL INFORMATIONToxicity:Ingredient Name Result Species ExposureMethanol (major ingredient) Acute EC50 = 16.912 mg/L Marine WaterAcute LC50 = 2500000 ug/L Marine WaterAcute LC50 = 3289 mg/L Fresh WaterAcute LC50 > 100000 ug/L Fresh WaterAlgaeCrustaceansDaphniaFish96 hours48 hours48 hours96 hoursPersistence and Degradability: Methanol biodegrades easily in water and soil.BOD5 = 1.1COD = 1.05 – 1.55, 99%Bioaccumulative Potential: Risk of bioaccumulation is low (BCF <500 and low log K ow <4). BCF =0.2 - <10 Log K ow = -0.77Mobility in Soil: Methanol is highly mobile. Adsorption coefficient (K oc) solid phase/liquid phase = 1 Other Adverse Effects: None known13. DISPOSAL CONSIDERATIONSThe generator of a waste is always responsible for making proper hazardous waste determinations and needs to consider state and local requirements in addition to federal regulations.Recycle wherever possible. Large volumes may be suitable for re-distillation or, if contaminated, incinerated. Can be disposed of in a sewage treatment facility.This material, if discarded as produced, would not be a federally regulated RCRA “listed” hazardous waste. However, it would likely be identified as a federally regulated RCRA hazardous waste for the following characteristic of ignitability (D001). See Sections 7 and 8 for information on handling,storage and personal protection and Section 9 for physical/chemical properties. It is possible that the material as produced contains constituents which are not required to be listed in the MSDS but could affect the hazardous waste determination. Additionally, use which results in chemical orphysical change of this material could subject it to regulation as a hazardous waste.14. TRANSPORT INFORMATIONDOT/TDG Proper Shipping Name: Flammable Liquid n.o.s. (Methanol)Product #(s) – 4105DOT/TDG Identification Number: UN1993DOT Hazard Class: 3 / TDG Hazard Class: 3(6.1)DOT/TDG Packing Group: IIERG Guide Number: 131Marine Pollutant: No15. REGULATORY INFORMATIONTSCA: Methanol is listed on the TSCA inventory.DSL: Methanol is listed on the DSL inventory.OSHA (Occupational Safety and Health Administration): This material is considered to be hazardous as defined by the OSHA Hazard Communication Standard.This material has not been identified as a carcinogen by NTP, IARC or OSHACERCLA/SARA – Section 302 Extremely Hazardous Substances and TPQ (in pounds): This material does NOT contain chemicals subject to the reporting requirements of SARA 302 and 40 CFR 355 Appendix A and B.EPA (CERCLA) Reportable Quantity (in pounds): This material contains the following chemicals subject to the reporting requirements of 40 CFR 302.4.Component Concentration RQMethanol 22-36% 500 lbs CERCLA/SARA - Sections 311/312 (Title III Hazard Categories):Acute: Yes Chronic: Yes Fire: Yes Reactivity: NoCERCLA/SARA – Section 313 and 40 CFR 372: This material contains the following chemicals subject to the reporting requirements of SARA 313 and SARA Title III and 40 CFR:Component Concentration de minimisMethanol 22-36% 1% California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material contains detectable chemicals known to the State of California to cause cancer and/or reproductive toxicity.Component Concentration EffectMethanol 22-36% Developmental Canada:This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the SDS contains all the information required by the Regulations.WHMIS Hazard Class: B2, D1B, D2A, D2B16. OTHER INFORMATIONIssue Date: May 2, 2013Previous Issue Date: May 2, 2013Change: Updated to new GHS compliant HCS 2012 criteriaProduct #(s) – 4105DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIESThe information in this document is believed to be correct as of the date issued. HOWEVER, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY OTHER WARRANTY IS EXPRESSED OR IS TO BE IMPLIED REGARDING THE ACCURACY OR COMPLETENESS OF THIS INFORMATION, THE RESULTS TO BE OBTAINED FROM THE USE OF THIS INFORMATION OR THE PRODUCT, THE SAFETY OF THIS PRODUCT, OR THEHAZARDS RELATED TO ITS USE. This information and product are furnished on the condition that the person receiving them shall make his own determination as to the suitability of the product for this particular purpose and on the condition that he assumes the risk of his use thereof.。

船用涂装术语

船用涂装术语供应船supply ship 游艇yacht冷藏船refrigerated ship 集装箱船container ship 散装货船bulk carrier 机务superintendent 船长captain 大副chief officer水手长bosun 木匠carpenter轮机长chief engineer 装配工/钳工fitter管理人/监督人supervisor 厨师cook船员crew 工长/领班foreman转包人/分包工subcontractor 原始资料initial data冲击/碰撞impact 领航员pilot港口port 大接缝master butt装配/组合assembly 船台装配erection船台berth/slipway 船台开工/铺龙骨keel-laying 图表diagram 舱口hatch潜水器submersible 海试，试航sea-trial滚装船roll-on/roll-off ship 双体船catamaran油船，油轮tanker 驳船barge港务局port authority 机舱engine room舵机舱steering gear room 油舱（柜）oil tank基座foundation 燃油舱fuel oil tank滑油舱lube oil tank 污油水舱slop tank污水井bilge well 舱底水limber water干隔舱（空舱）cofferdam 空舱/梯子口狗洞void space 格栅grating 管子pipe管弄pipe tunnel 油盘oil pan边舱wing tank 压载水舱water ballast tank 淡水舱fresh water tank 饮用水舱potable water tank 艉尖舱after peak tank 艏尖舱fore peak tank深水舱deep tank 双层底double bottom游泳池swimming pool 平台platform通道passage 通风筒ventilator边翼/侧面wing 浮船坞floating dock坞门caisson 坞底dock bottom进坞docking 出坞undocking踏板foot board 分段/墩木block龙骨墩keel block 托架pedestal水密watertight 舱壁板bulkhead肋骨frame 梁，横梁beam人孔access hole R-孔scallop花铁板floor plate 球扁钢bulb plate槽钢channel bar 角钢angle bar工字钢aitch bar 新钢板new steel plate排水孔scupper 角孔angle hole镀锌galvanizing 镀锌板galvanized steel plate 镀锌铁板galvanized iron 附件，配件attachment边（缘）edge 开口边缘eye edge切割边（缘）cutting edge 下陷/咬边under cut船长length 型宽breadth molded型深depth molded 轻载水线L.L.L.(light load line) 重载水线 D.L.L.(design limit load)吃水draft船体hull 船壳shell干舷topside 水线boottop直底vertical bottom 平底flat bottom主甲板main deck 遮阳甲板shade deck罗径甲板compass deck 驾驶甲板navigation deck桥楼甲板bridge deck 居住甲板mess deck登艇甲板embarkation deck 游步甲板promenade deck艏楼甲板forecastle deck 艉楼甲板poop deck左舷port 右舷starboard船艏bow 船艉stern系泊设备（配置）mooring arrangement 带缆桩bitt/bollard绞车winch 锚机windlass锚anchor 锚链anchor chain锚链筒hawse pipe 锚链舱chain locker艏侧推bow thruster 球鼻型船艏bulb bow螺旋浆propeller 舵rudder舵杆rudderstock 海底阀箱sea chest船底塞bottom plug 堵塞chock up测深仪depth sounder 计程仪log防鼠（隔）板rat guard 舭（船底弯曲部）bilge舭龙骨bilge keel 舷墙bulwark舷梯gangway 舷边栏杆gunwale rail舷窗porthole 上层建筑superstructure 生活区accommodation 栏杆rail/railing天蓬awning 烟囱funnel扶梯ladder 旋梯winding stair桅杆mast 储物间store room雷达桅radar mast 灯桅lamp mast吊艇臂davit arm 桅柱derrick post克令吊crane 吊杆boom吊货杆cargo boom 天线架aerial mast艏柱stem post 艏灯桅stem light mast 直线形首柱straight stem 甲板室deck house货舱cargo hold 上斜坡upper hopper 下斜坡lower hopper 反顶under deck舱口盖hatch cover 箱型舱盖hatch pontoon 橡皮槽rubber channel 舱口围hatch coaming空气喷涂air spray 无气喷涂airless spray满涂full coat 预涂stripe coat补漆touch-up 刷涂brushing漏涂holidays 复涂overcoating光泽gloss 龟裂/开裂cracking失光loss of gloss 流挂sagging/running出汗/发汗sweating 起泡blistering缩孔/露底crater 色差color difference收缩/起皱shrinking 发花（漆病）floating遮盖力hiding power 咬底lifting桔皮orange-peeling 附着力adhesion针孔pinhole 发白/褪色blushing色斑staining 剥落peeling翘皮peeling off 结皮/结膜skinning遮盖力弱lack of hiding 渗色bleeding结露condensation/dew 流平性leveling粘度viscosity 刷痕brush mark烧损burn damage 机械损伤mechanical damage 半光semi-gloss 光滑glossy底漆undercoat/primer 面漆topcoat荧光漆luminescent paint 车间底漆shop primer磷化底漆wash primer 防锈漆anti-corrosive paint防污漆anti-fouling paint 厚膜涂料high-build coating 环氧漆epoxy paint 焦油环氧coal tar epoxy氯化橡胶chlorinated rubber paint 醇酸漆alkyd paint沥青asphalt 基料base固化剂curing agent 旧油漆previous paint已涂油漆present paint 将涂油漆succeeding paint 树脂resin 有机的organic多余的excess 挥发evaporate雾化atomization 粉化chalking腻子/油灰putty 环氧腻子epoxy putty漆雾paint dust 污染/污染物contamination 海生物sea animal 盐salt污泥mud 油污oil and grease 粘土slime 海藻sea weed/grass 藤壶barnacle 水解层hydrolyze layer 淤积物/沉淀物deposit 口头地verbally便条verbal note 船体车间hull shop涂装车间coating shop 仓库/储藏室store施工application 脚手架stage/scaffold 表面处理surface preparation/surface treatment钢板表面steel surface 外部external内部internal 高压淡水冲洗HPFW酸洗pickling 酸洗池pickling tub(bath) 脱脂degreasing 除油oil removing化学清洗chemical cleaning 去垢剂/清洁剂detergent锈rust 返锈rerusting点蚀/锈斑pitting 锌盐zinc salt/white dust 熔渣slag 飞溅spatter灰尘dust 粉尘ash喷砂sand blasting 扫喷砂sand sweeping点喷砂spot blasting 湿喷砂wet blasting棱角钢砂喷砂grit blasting 打磨grinding/griting敲铲chipping/scraping 氧化皮mill scale砂纸打磨sanding 钢丝盘刷wire brush砂皮纸sand paper 盘型砂纸disc-sand斜面，有坡度sloping 粗糙度roughness等级grade 除湿机dehumidifier减湿/去湿dehumidification 去湿dehumidify空调机air conditioner 压缩空气compressed air压缩机compressor 热风炉air oven红外线炉infrared oven 水分离器water-separator吸尘器vacuum 集尘器dust collector绝缘insulation 抹布rag砂sand/grit 锤子hammer铲刀scraper 水泥cement平方米square meter 冰冻freeze搅拌agitation 搅拌器agitator/mixer喷漆泵spray pump 喷枪spray gun喷嘴spray nozzle 刷子brush滚筒roller 门机gantry crane汽车吊truck crane 叉车fork lifter口罩mask 手套glove温度计thermometer 湿度计hygrometer测厚仪thickness gauge 调整/校对adjust湿膜仪wet film thickness gauge 干膜厚度dry film thickness 湿膜厚度wet film thickness 受热面heating surface风向wind direction 风力wind force自然干燥natural seasoning 筛网sieve牺牲阳极sacrificial anode 阳极保护anode shield阴极保护cathodic protection 慢挥发溶剂slow-evaporating 稀料thinner 溶剂solvent油漆配套paint scheme 指触干dry to touch硬干hard dry 涂布率coverage复涂间隔recoating interval 露点dew point湿度humidity 相对湿度relative humidity 氧气oxygen 渗漏leakage1. 漏水孔有锈（旧油漆），焊缝边上有少量的飞溅，已要求施工队用铲刀去除。

TS01-3 漆性能

该漆喷涂、刷涂、浸涂均可。

涂装道数视效果而定。

每道涂20微米左右，可自干，也可烘干。

自干涂装间隔24小时（23℃），温度低适当延长。

配制后的漆必须在8小时内（23℃）用完，未用完的组份一必须盖严，以防胶化。

六、注意事项1．每道涂刷不宜过厚，过厚易造成起泡、起皱等现象。

2．本品含有机溶剂，注意防火，施工时注意环境通风。

3．配漆和涂漆过程中，严禁与水、酸、碱、醇等接触。

4．建议施工环境温度在10℃-35℃，低于5℃、雨天或湿度过高时不宜施工。

5．该漆存放时应保持通风、干燥、防止日光直接照射，并应隔绝火源，远离热源。

夏季气温过高时应设法降温。

6．在运输时应防止雨淋，日光曝晒，并应符合有关规定。

七、贮存期：未启封贮存期一年，超过贮存期经检验性能合格仍可使用。

S31-11聚氨酯烘干绝缘漆（分装）组成：聚氨酯烘干绝缘漆是由异氰酸酯加成物和聚酯组成，其配比为加成物:聚酯=6:5。

·特性：该绝缘漆具有优良的电绝缘和柔韧性。

·用途：可作为防潮的电绝缘涂层。

技术要求注：第4、5、8三项检验时，漆膜厚度为13±3μm。

施工参考1.施工钱两组份应充分混合，用多少配多少，在8h内用完。

2.可用无水环已酮进行稀释，切勿用醇类溶剂。

3.配漆时注意容器工具的清洁、干燥、不得使水进入。

F30-13酚醛烘干绝缘漆组成：该酚醛烘干绝缘漆是由酚醛树脂、干性植物油、催干剂和200号油漆溶剂油或松节油调制而成。

·特性：该绝缘漆具有耐潮、绝缘等性能、属A级绝缘材料。

·用途：适用于电机电器等绕组的浸渍，或用于塑料和金属表面的涂覆作绝缘耐潮之用。

技术要求试验方法酸价按HG2-569-77《涂料酸价测定法》中稀释法的（2）混合溶剂法进行。

干燥时间按GB1736-79《绝缘漆漆膜制备法》中的浸渍法在铜片上制备漆膜。

干燥时间按GB1728-79《漆膜、腻子膜干燥时间测定法》中的实际干燥时间测定法甲法进行。

第二章刷油工程-定额

2.1 管道刷油工作内容：调配、涂刷。

计量单位：10m2工作内容：同前。

计量单位：10m22.2 设备与矩形管道刷油工作内容：同前。

计量单位：10m2工作内容：同前。

计量单位：10m22.3 金属结构刷油2.3.1 一般钢结构工作内容：同前。

计量单位：100kg工作内容：同前。

计量单位：100kg2.3.2 管廊钢结构工作内容：同前。

计量单位：100kg工作内容：同前。

计量单位：100kg2.3.3 H型钢制钢结构工作内容：同前。

计量单位：10m2工作内容：同前。

计量单位：10m22.4 铸铁管、暖气片刷油工作内容：同前。

佐敦油漆参数

1.38
A:1.47 B:0.90混合1.36
80/100/150
6.3/5/3.3
12h
No.23
16:4
8
20
63
1.56
A:1.66 B:1.05混合1.58
100/125/200
6.3/5/3.2
10h
No.23
6.5:1
4
18.8
63
1.57
A:1.70 B:1.00混合1.56
80/100/150
A:1.35 B:0.93混合1.27
Penguard Primer Penguard Classic
厚浆环氧漆
51
65
1.38
A:1.50 B:0.93混合1.39
佐敦工业防腐漆产品一览表
干膜厚度μm
100/125/200
75/150/200
30/40/50 60/80/100 50/80/100
15/20/50 200/300/500
30/40/50 40/50/60
40/50/60
40/50/60 100/100/150
理论涂布率 m2/l
重涂间隔时间(23
℃)
稀释剂
混合比例 Mixing Ratio
Pot Life hour
包装(liters)
,
6.7 /5.4/3.4
12h
No.17
Futura AS
双组份聚氨酯面漆
Futura HB Hardtop AS Hardtop HB Hardtop Flexi
Hardtop XP 聚硅氧烷漆 Hardtop PS5 乙烯类漆
双组份聚氨酯亚光面漆双组份聚氨酯面漆聚氨酯亚光面漆聚氨酯弹性面漆

01-水性及高固体份汽车修补漆 _湛新树脂 2016 03

固含%
羟值%
产品描述
42
4.1
厚膜无针孔性，高光泽
42
4.2
42
4.1
44
3.0
快干，异氰酸酯用量少
43
4.4
流变性，达 150um无针孔，哑光，耐水性佳
硬度高干，性能在VSM 耐化学品 2521 和，性能佳 SM 6810w之间
Allnex的水性丙烯酸树脂 -------MACRYNAL
Allnex的水性带羟基丙烯酸分散体 Macrynal™ Water-borne Hydroxylated Polyols for Isocyanate Crosslinking
Allnex的水性丙烯酸树脂 -------MACRYNAL
MACRMYNAL SM 6810 SM 2521 VSM 6299 SM 6817 SM 6826
无溶剂丙烯酸改性: Daotan VTW Daotan VTW Daotan VTW Daotan VTW
6462/36WA 6463/36WA 6464/36WA 6473/36WA
27
扩链产品推荐应用领域
Daotan VTW 1233 Daotan STW 1235 Daotan TW 6451 Daotan TW 6491
完全不含溶剂: Daotan TW 6490/35WA Daotan TW 6491/33WA Daotan TW 6492/35WA
不含NEP/NMP但含溶剂: Daotan TW 6439/30WA Daotan TW 6450/30WA Daotan TW 6451/32WA
Emulsification 乳化
EP 147w

醇酸水漆msds

二、醇酸水漆1、醇酸防锈底漆产品说明：单组份水性醇酸树脂漆，分为Ⅰ型和Ⅱ型。

产品特性：含磷酸锌颜料，不含有毒重金属颜料。

性价比高、固含高、涂刷面积大。

本产品不适用恶劣的腐蚀性环境，或者用于严重锈蚀或污染的钢材表面。

建议采用高压无气喷涂。

应用领域：适合低、中等防腐防锈要求；主要应用于C型钢、H型钢、汽车底盘、传动轴、减震器等汽车配件或者电梯桁架、曳引机等电梯配件或者矿井支架等领域的涂装。

技术参数：自然干燥时间涂层数据颜色铁红、中灰、深灰、黑、孔雀蓝蓝光泽醇酸防锈底漆Ⅰ型<10（60°角）醇酸防锈底漆Ⅱ型10-30（60°角）典型厚度醇酸防锈底漆Ⅰ型35-45μm，抛丸处理：干膜厚度>45μm醇酸防锈底漆Ⅱ型35-45μm，抛丸处理：干膜厚度>45μm 理论涂布率6-7m2/kg实际涂布率考虑适当的磨耗系数涂覆方法辊涂、刷涂或喷涂，也可无气喷涂，静电喷涂干燥方式可采用自然干燥或者高温强制烘干。

自然干燥保证温度大于5℃，湿度不高于75%。

烘干时，流平室的温湿度与空气流通性对漆膜的干燥性也有明显的影响，可采取措施降低其湿度、提高温度、增加通风，以加速漆膜水分的初期挥发，并使流平时间不少于10分钟，80度-100度烘干时间不少于30分钟。

2、醇酸面漆产品说明：单组份水性醇酸树脂漆。

产品特性：漆膜光泽高、丰满度好；氧化交联、低温成膜性好。

应用领域：适合中等装饰要求同时对防锈性有较高要求的底面合一或者做为高光泽装饰面漆配套使用。

技术参数：自然干燥时间涂层数据颜色可制成多种颜色光泽高光质量固体分≥40%典型厚度干膜厚度30-40μm理论涂布率7-8m2/kg实际涂布率考虑适当的磨耗系数涂覆方法无气喷涂、空气喷涂、刷涂、滚涂干燥方式可采用自然干燥或者高温强制烘干。

自然干燥保证温度大于5℃，湿度不高于75%。

TekTop TPO 涂层优化剂说明书

TEST COLOR WEIGHT SOLIDS % VOLUME SOLIDS % VISCOSITY
VOC FLASH POINT WEIGHT PER GALLON
METHOD N/A
ASTM D1644 ASTM D2697 ASTM D2196 EPA Test Method 24
ASTM D56 ASTM D1147
RESULTS Blue 2% 2% 50 cps
< 100 g/L 105°F / 41°C
10.2 lbs
APPLICATION TEMPERATURES
40°F (4.5°C) — 110°F (43.5°C)
COVERAGE
800 — 1,000 ft2/gal (75 — 93 m2/gal)
APPLICATION INSTRUCTIONS
1. Thoroughly clean substrate using TekTop™ Roof Wash and allow to dry completely. Follow TekTop™ Roof Wash instructions for proper use. 2. Apply using a short nap solvent resistant roller cover 3. The application should be as thin as possible 4. Allow TPO Primer to dry for a minimum of one hour before coating with TekTop™ Patch and Silicone Roof Coating.
TECHNICAL ASSISTANCE

佐敦公司介绍,涂料基本知识(B篇)

物理干燥(Physical Drying)
• • • • 氯化橡胶(Pioner Primer) 乙烯类(Vinyl) 丙烯酸漆(Pioner Topcoat) 沥青漆(Asphalt) 焦油漆(Tar)
Jotun Protective 物理干燥
• 溶剂挥发 • 聚合物聚集在一起并相互融合而结成完整的漆膜 • 没有化学键的反应
2nd Organic Topcoat 2+
无机锌底漆
Zn
钢材当层发生破坏时，无机锌中的锌粉牺牲了自已，从而保护了钢材当层发生破坏时，无机锌中的锌粉牺牲了自已，从而保护了钢材.
Jotun Protective
通过牺牲阳极进行保护钢材
没有阴极保护的状况电解液锈蚀
涂层
钢材
有了阴极保护的状况海水阳极电流阳极
涂层
钢材石灰质层
Jotun Protective
油漆技术
Jotun Protective 油漆的组成:
• • • • •
基料着色颜料体质颜料溶剂添加剂
Jotun Protective 油漆的组成
Paints 基料
天然树脂 •干性油 •煤焦油 •硝化棉合成树脂 •醇酸树脂 •氯化橡胶 •环氧树脂 •聚酯树脂 •聚氨酯 •硅树脂 •乙烯酯树脂
Jotun Protective Production
of paints
Jotun Protective 一个油漆防腐系统可比作一幢房屋
首先: 地基 - 底漆
其次: 中间的楼层 - 中间涂层
最后: 屋顶 - 面漆
它们都有其各自的特殊功能 • 在一幢房屋中 • 在一个油漆系统中
Jotun Protective

Alkyd Topcoat 醇酸保养面漆(1T3)

-如何加快轨道车辆的漆面维修-亮克威泽工业快速修补漆解决方案

醇酸漆和聚氨酯漆区别？

家具英语词汇大全

jotun hardtop one湿固化丙烯酸聚硅氧烷面漆(0t2) 产品技术说明书

JOTUN佐敦油漆比重表

凯特高固含环氧填充剂 密封漆 产品说明

Acrylic Finish Topcoat说明书

涂料行业专业用词英汉对照表

油漆涂料英语词汇

金冠鼎汽车漆技术手册说明书

冠凯帕蒂柔软清洗涂层液说明书

船 用 涂 装 术 语

TS01-3 漆性能

第二章 刷油工程-定额

佐敦油漆参数

01-水性及高固体份汽车修补漆 _湛新树脂 2016 03

醇酸水漆msds

TekTop TPO 涂层优化剂说明书

佐敦公司介绍,涂料基本知识(B篇)

凯特高固含环氧填充剂密封漆产品说明

船用涂装术语

第二章刷油工程-定额