P6855N裁床单

合集下载

好帮手裁切机机参数(2015.07.23)

50-60Hz/AC220V
10
功率
4 Kw
11
气源要求
0.4-0.6Mpa以上洁净、干燥空气
12
耗气量
约150升/分钟
13
设备外形尺寸
L4800xW2570xH1310（mm）
14ቤተ መጻሕፍቲ ባይዱ
设备重量
约1.5吨
15
16
17
18
19
20
21
备注：
1.此参数仅对现有设备使用，后续升级后的参数可能有所变动；
设备优点：
1.节约人工成本，可代替3-6人手工裁切；
2.提高生产效率（11-13片/分钟）；
3.裁切质量高，误差小（±2mm）；
4.参数化设置裁切长度，按照设置参数自动裁切相应长度；
5.污染小，减少人工裁切时手汗、脏污接触材料；
6.消除静电，减少变形；
7.可以连续运转，不受体力限制，半年至一年可回收成本；
好帮手自动化EVA/TPT全自动裁切机参数
详细如下：
序号
项目
参数
备注
1
名称
EVA/TPT全自动裁切机
2
型号
HBS-CQ1100
3
裁切速度
600-800片/小时
4
最大裁切宽度
≤1100（mm）
5
最大裁切长度
≤2000（mm）
6
裁切长度误差
±2（mm）
7
操作界面
PLC触摸屏操控
8
界面语言
中文或英文
9
电源要求

裁床设备常见故障排除

裁床设备-常见故障排除本章内容提纲：
7-1 常见机械故障及排除方案
㈠机头及Y导轨部分
㈡机架及刚毛传送部分
㈢真空吸附部分
㈣拾料台部分
7-2 常见电气故障及排除方案
㈠变频器部分
1.真空泵变频器故障代码及解决方案
2.刚毛和拾料台变频器
㈡伺服机构部分㈢电气元件部分
1.传感器
2.电磁阀
3.变压器
4.接触器及继电器
5.直流电源
㈣电缆线路
㈤电脑部分
㈥CutterControl及MarkEdit软件部分
㈦安川伺服驱动和欧姆龙伺服驱动报警代码及解决方案
1、安川伺服驱动报警代码及解决方案
2、欧姆龙伺服驱动报警代码及解决方案
㈧裁剪故障现象及解决方案
7-1 常见机械故障及排除方案㈠机头及Y导轨部分
㈡机架及刚毛传送部分
㈢真空吸附部分
㈣拾料台部分
7-2 常见电气故障及排除方案㈠变频器部分
1.真空泵变频器故障代码及解决方案
2.刚毛和拾料台变频器
㈡伺服机构部分
㈢电气元件部分1传感器
2.电磁阀及气缸
3.变压器。

真皮系列裁断作业指导书(修改版)

•皮料配双，瑕疵使用常识
1.剪裁时应从头部开始操作至臀部，由差到好循序渐进地尽可能使用皮料。
2.脖子位置的生长纹处剪裁需要顺着生长纹的方向，以避免鞋子成型后出现皱横而影响外观。
3.除了绿色区域外，所有部件需按材料抗拉方向进行裁剪，以避免鞋子在成型定型时造成变形。
4裁剪时应该避开材料所具有的虫斑，瑕疵等。或将较轻微的瑕疵用在部件被掩盖区域或部位。
鞋包裁片划线员每捆进行抽检，有无色差，冲针、冲孔有无歪斜，裁片有无大小变形
注意事项
划线员划线时，划线板要与材料吻合，四周对准，不可漏划，线路要清晰、流畅
5 打码、烫金、丝印工序操作要点
1.打码
01
打码是让所有人认识这只鞋子（身份证）。
02
打码员作业前先点鞋包的捆数，是否与指令数相符。
定额控制
大货上线首单确认开发用量，用量不足和过多及时寻找原因并联系相关部门解决。
2 下料工序操作要点
✓真皮
1、牛皮部位分解图前腿腹部(纤维最稀疏,松软)
后腿
1
背部(纤维紧密, 臀部(纤维最紧密部位,
颈部瑕疵少,品质最好) 但天然瑕疵较多)
尾巴
(有明显颈纹)
眼孔
腹部
2、牛皮的好处/优点
皮料的可塑性強，可根据脚型做出各式各样的鞋子，也可做包、衣服等可有效防止有害物质入侵(不易腐化．变质）
一年四季都十分舒适（能适应各种天气环境）伸展性強
透气、外观漂亮，有价值感
耐用、牢固
3、牛皮的种类
➢ 光面皮(珠面皮)-Full Grain Leather ➢ 涂料皮(漆皮)- Patent Leather ➢ 牛八哥（磨砂皮）-Nubuck ➢ 压纹皮-Embossed Leather ➢ 摔花皮-Tumbled Leather ➢ 反毛皮-Suede

STIHL MS 261 中文名：斯图尔 MS 261 中级专业树裁机说明书

STIHL MS 261 Chain Saw Redesigned for OptimalPerformanceImproved powertoweight ratio, fuel efficiency and convenience featuresRelease Date: 8/30/2016Press inquiries:Lindsy Shrewsberry(757) 4869286All other inquiries:STIHL Incorporated(757) 4869100VIRGINIA BEACH, Va. – Designed as a midrange professional saw, the STIHL MS 261 model range features low exhaust emissions, fuel efficiency and durability. A redesigned cylinder and slimmer, ergonomic engine housing reduces weight thus delivering a great powertoweight ratio, while its preseparation air filtration system boosts the efficiency of the engine’s filter system, resulting in less frequent cleaning.“We’ve made a great chain saw even better and STIHL now offers three model options — the STIHL MS 261, STIHL MS 261 CM with STIHL MTronic™ or STIHL MS 261 CMQ with STIHL MTronic and STIHL Quickstop®Plus — for professionals to choose the best model for the job,” said Kent Hall, senior product manager at STIHL Inc.Optimized for PerformanceThe redesigned model range also includes upgraded performance features including:Slimmer sprocket cover, reducing wood chip clogging so professionals can spend more time on the job and less time clearing the cover.Redesigned bumper spikes with fewer teeth, spaced wider apart for optimized wood traction whenbucking and felling.Easy to Use, Convenient to MaintainSTIHL MS 261 chain saws are designed with customer convenience in mind, coming equipped with: Antivibration system to help users stay comfortable during extended use.Preseparation air filtration system boosting the engine’s filter system efficiency, resulting in lessfrequent cleaning.Toolless fuel and oil filler caps simplify the refilling of fuel and oil.Translucent fuel tank, making it easy to tell when it’s time to refill.Options for Maximum PerformanceUsers can maximize their performance by selecting either the STIHL MS 261 CM equipped with STIHL MTronic™ or the STIHL MS 261 CMQ with STIHL MTronic™ and STIHL Quickstop® Plus.STIHL MTronic™ engine management system includes an onboard microprocessor that digitallymonitors and automatically compensates for changes in work conditions, including elevation, fuel quality, octane levels and dirty air filters. The end result is maximum performance across a wide range of cutting conditions without making any manual adjustments.STIHL Quickstop® Plus chainbraking system is designed to stop the chain in less than one secondwhen the user completely releases the rear handle.MSRP starting at $599.95:STIHL MS 261: $599.95STIHL MS 261 CM: $599.95STIHL MS 261 CMQ: $719.95For more information on the STIHL MS 261 chain saw, visit .About STIHL Inc.STIHL Inc. manufactures the number one selling brand of gasolinepowered handheld outdoor power equipment in America,* as well as the number one selling brand of chain saws in the world. STIHL products are sold through servicing power equipment retailers from coast to coast – not big box stores. Located in Virginia Beach, Va., STIHL Inc., the headquarters for U.S. operations for the worldwide STIHL Group, exports to over 90 countries around the world; and the majority of STIHL products sold in America are also built in America.* STIHL products sold through U.S. STIHL dealers are for distribution in the United States only. For more information or for the name of a local STIHL retailer, call toll free 1800GO STIHL (18004678445), visit or text your zip code to 78445.*A majority of STIHL powerheads are built in the United States from domestic and foreign parts and components."Number one selling brand" is based on syndicated Irwin Broh Research as well as independent consumer research of 20092015 U.S. sales and market share data for the gasolinepowered handheld outdoor power equipment category combined sales to consumers and commercial landscapers.STIHL is pleased to support the work of Independent We Stand, the Tree Research and Education Endowment Fund (TREE Fund), International Society of Arboriculture (ISA), the Tree Care Industry Association (TCIA), National FFA, National Association of Landscape Professionals, the National Recreation and Parks Association, the National Association of State Park Directors and the North American Retail Hardware Association.For information on job opportunities with STIHL Inc., please go to . STIHL is an EEO and drugfree work environment.# # #MS 261 Specifications Professional UseDISPLACEMENT50.2 cc (3.06 cu. in.)ENGINE POWER 3.0kW (4.0 bhp)POWERHEAD WEIGHT 4.9 kg (10.8 lbs.)FUEL CAPACITY500 cc (16.9 oz.)CHAIN OIL CAPACITY270 cc (9.13 oz.)OILOMATIC® CHAIN26 RM3GUIDE BAR LENGTHS* (Recommended ranges)40 to 50cm (16" to 20") STIHL ROLLOMATIC® EPOWER SOURCE GasSTIHL recommends #3634 (26 RM3 67) OILOMATIC® saw chain and 16" 3003 008 6813 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.。

Spartanics公司推出L-500激光模切系统

一
墨水，这也可以让颜色饱和度更
高，让标签用肉眼审视时更加逼真。ＳｒＰｅＬ一０３ｕｅ４３ＡＷ使用的喷墨ｒｓｓ头是爱普生自己的微压电喷墨头，
ＳＤ）越来越高的要求。杜邦开发Ｉ
．
ｔ
。
。
＾
口
杜邦展出新一代柔性版版材
在德鲁巴２１０２展览会上，杜邦公司展出了新一代柔性版印刷
版材。开发新一代柔印版材，杜邦首先是为了满足市场对实地密度（Ｏｉｎｅｔ英文缩写Ｓｌｄｉｋｄｎｉｙ，ｓ
这些配合基于网屏ＳｒｅｑｉｃｅｎＥｕｏｓＵｎｖｒａ工作流程的高级色彩管理ｉｅｓｌ技术，可以使打印的质量更高。这种印刷系统还将支持白色墨水打印，从而使之能够在透明膜和金属箔上打印。ＴｒｅｒｓＪｔＬ５ＵＶ的打印头ｕｐｅｓｅ３０
的新一代柔印版材，包括采用溶剂加工工艺的ＣｙｅＤＳｒｌＰ，和采用标准工作流程的数码柔印版材
ＤｕＯｔＣｙｅａｔＤＦＰｎｒｌＦＰ。这些新ｓ
打印网点锐利，颜色质量高，细节
的材料上打印，也可以在刚性材料
上打印。Ｕｖａｒ８的一个主要优势，ｉｔｒＰｏｓ

裁床保养

2．拆下过滤器的隔膜，并用压缩空气喷射器清洁它。 3．替换膈膜，用盖子盖上（一点压力就够了）。
注意: 不必打开配电盘面板清理过滤器。
TopCut 系列裁床－操作手册
5连接杆组件可很好地工作。由磨损而造成的松动或噪音不一定会出现。
- 22 -
按5.1.4段落中描述的方法，松动活塞－刀片连接杆装配。
注意: 只可使用 PGM 提供的修整石。
5.5 降低刀片导向架
刀片导向架必须保持清洁，插脚转动点保持润滑。如果插脚有滑痕则必须替换，如果它不能自由转动，必须替换其内部架子。插脚必须始终粘住刀片，而无需将其按压上去。可以通过松开特定的螺丝钉来调整打开导向架的开口。
图 17－降下操作刀。
TopCut 系列裁床－操作手册
警告！按顺序执行这些步骤，以避免人员伤害和财产损失。 1．按下红色紧急按钮； 2．用提供的钥匙提起裁切头盖子； 3．按 5.1.4 段落中描述的方法，松开刀片－活塞连接杆； 4．降低裁切头盖子； 5．从金属板上卸下 Lexan 保护装置； 6．恢复之前按下的紧急按钮的位置，并通过机器自动启动键“machine autostart”运行机器； 7．用喷涂枪仔细清洁金属板、刀片导向架和磨刀轮； 8．运行裁床程序
TopCut 系列裁床－操作手册
图 12－替换钻头
5.1.2 磨刀轮
- 15 1．将机器所备的夹头钥匙插入轴中，逆时针转动； 2．将钻头朝下，然后将它向上滑动； 3．插入新的钻头； 4．转动夹头钥匙锁紧钻头。
注意：只可使用 PGM 提供的钻头。
图 13－替换磨刀轮
如果磨刀轮断裂、损坏或磨坏，请按下列步骤替换磨刀轮以防磨刀效果不好： 1．通过横杆控制台上提供的钥匙提起裁切头(图 8); 2．将固定在裁切头的磨具上的螺丝钉松开； 3．用轮子下面配备的叉子来锁紧磨刀轮； 4．松开固定轮子的螺帽； 5．移除磨刀轮，用新的替换； 6．拧紧螺帽，移开叉子，在原位置替换磨刀器（按照第 2 点，拧紧两个螺丝钉）； 7．对位于刀的另一面的磨刀器同样操作； 8．降低裁切头盖子。

卡特(Cat) PM820、PM822和PM825凝胶机械拉拔机说明文件

Cat® C18 ACERT™ EngineGross Power (ISO 14396)563 kW 755 hp Operating WeightPM820 36 130 kg 79,630 lb PM822 36 700 kg 80,887 lb PM825 37 500 kg 82,650 lb Cutting DimensionsWidth - PM820 2010 mm 79 in Width - PM822 2235 mm 88 in Width - PM825 2505 mm 98.8 in Maximum Cutting Depth 330 mm 13 inPM820, PM822 and PM825 Cold Planers2CONTENTSIntroduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3Machine Feature Overview ....................4, 5Powertrain, Undercarriage ....................6, 7Operating Environment ........................8, 9Cutting System .............................10, 11Cat Grade Control Option ....................12, 13Material Collection System ..................14, 15Optional Equipment .........................16, 17Service and Reliability. . . . . . . . . . . . . . . . . . . . . . . 18, 19Cutting Bits ...................................20Cat Diamond Bits ..............................21Specifications ..............................22, 2323THE HIGH POWER HALF-LANE MILLING MACHINES YOU HAVE BEEN WAITING FORCat ® PM820, PM822 and PM825 cold planers are the product of years of study, tinkering, rethinking. Every system andcomponent has been examined, refined, optimized. The result is an advanced, world-class cold planer.The PM800 models are similar in design to their sister PM600 half lane cold planers...but they bring a lot more power, useful for the most demanding applications. The PM800 models deliver the same benefits as well: lowered operating costs and increased productivity, paired with Cat reliability and the legendary dealer support you expect from Caterpillar.The PM820, PM822 and PM825 are well equipped to deliver precision and efficient high production. Many options are available to enhance machine versatility and customize operations to suit the application, from milling highways to urban streets. Whether you are texturing the surface or milling an airport runway, there is a configuration that will meet your requirements and expectations.POWERFUL AND REFINEDPRECISION AND CONTROL WITH VERSATILITY TO SPARE.4938641011121413612457721. Cat C18 ACERT ™ Engine2. Ground Control Console3. Rear Water Fill Nozzle4. Remote Camera (option)5.Hydraulic Side Plates with Position Sensors6. Crawler Tracks with Bolt-on Pads7. Advanced Steering8. Dual Operating Consoles 9. Power Canopy (optional windscreens available, not shown)10. Dust Abatement System (option)11. High Pressure Water Spray Hose (option)12. Water Spray Control and Clean out Manifold13. LCD Touchscreen Display 14. Cat Diamond Bits (option)15. Cat Grade Control (option)515152744667891013142RUGGED POWERTRAIN SIMPLE DESIGN DELIVERS AMPLE POWER TO GROUND.C18 ACERT ENGINE– Meets regional emission standards as required:U.S. EPA Tier 4 Final / EU Stage IV– Provides a gross power of 563 kW (755 hp)– Automatic idle control function and multiple rotor speedsoptimizes output to the demand on the engine, keepingoperation smooth and efficient– High capacity cooling system keeps engine at idealtemperature for optimal fuel efficiency and lower emissions– Proven core engine design ensures reliability and quietoperation– Engine is iso-mounted to reduce noise and vibration6PROPEL SYSTEM– Robust propel system features two propel pumps and two propel circuits, diagonally opposed; each circuit drives the propel motors for two crawler tracks– Cross-flow traction control supplies dedicated hydraulic flowdiagonally across machine to the tracks that grip– Automatic Load Control senses load changes on the rotor system load and adjusts propel speed to prevent stalls and optimizeproduction7STABLE PLATFORM– Four leg posts with position sensors independently adjust and provide powered vertical movement to maintain desired height – Ride-control feature ensures smooth travel– Optional Cat Grade Control is integrated with the machine and works seamlessly to provide maximum cutting precision; system can be enhanced to full 3D milling capabilityWORRY-FREE TRACKS– Four crawler tracks based on proven Cat track design and components– Tracks automatically adjust to provide ideal tension – Track pads are easily replaceable with bolt-on designEXCELLENT MANEUVERABILITY– Four steering modes: front steer, rear steer, crab steer, coordinated steer– Advanced steering function adjusts track alignment to provide precise steering geometry and reduce pad wear – Minimum left cutting radius: 2 m (6.56 ft)– Minimum right cutting radius: PM820- 2 m (6.56 ft) PM822- 1.8 m (5.91 ft)PM825- 1.5 m (4.92 ft)The four post design offers excellent maneuverability and dependable operation to maximize versatility and production.8OPERATING ENVIRONMENT– Height-adjustable dual operating console is intuitive and comfortable– Optional power canopy can deploy or stow during machine operation; optional windscreen panels available– Touchscreen LCD display provides gauge cluster, operating information, remote camera feed, machine control anddiagnostics; optional second and third display available to provide additional gauge or machine operation/control information – Optional suspension seats reposition for optimal visibility and comfort– Lockable storage provides secure area to stow personal items – 12-volt power receptacleERGONOMIC CONTROLS– Controls comfortably positioned for easy use– Large, backlit keypads are visible in all light conditions – Durable design tested to 1 million cycles– Lockable covers provide protection from vandalismEQUIPPED FOR 24/7 OPERATION– Working areas and perimeter well lit with standard halogen lights – Displays and controls easy to see – Additional LED light options – Available balloon lighting optionsCOMFORT AND CONTROLOPERATE WITH CONFIDENCE.REAR910ROBUST ROTOR CHAMBER– Chamber optimizes material flow to promote thorough clean-out – Thicker steel in areas exposed to high abrasion enhances durability– Side plates are hydraulically adjustable with position-sensing cylinders, can be used as an averaging ski– Hydraulically adjustable moldboard applies optimal down-pressure to keep material contained for clean out and minimize required sweepingANTI-SLAB DEVICE– Helps to optimize sizing and gradation – Protects collecting conveyor– Prevents blockage in the discharge openingTHE VERSATILITY YOU NEED– Two available cutting widths; – Cutting depth to 330 mm (13 in)– Enhanced clearance for flush cutting– Three rotor speeds, electronically selectable during operation – High production and fine milling drums available – Optional Cat Grade Control keeps machine on targetCUTTING SYSTEMEFFICIENT AND DEPENDABLE, AS IT SHOULD BE.11ADVANCED AUTOMATED FEATURES– Automatic Load Control senses load changes on the rotor and adjusts propel speed to prevent stalls and optimize production– Automatic plunge-cut feature ensures precise, repeatable starting cuts and reduces wear on machine (requires Cat Grade Control option)– Ramp-in, Ramp-out cutting capability (requires Cat Grade Control option)– Jump hold feature assists to clear obstaclesROTOR DRIVE SYSTEM– Driven by two 6-rib high-tensile belts– Automatic belt tensioning to reduce slippage – Heavy-duty dry clutchHIGH PRODUCTION ROTORS– 2.0 m (79 in), 2.2 m (88 in) or 2.5 (98.6 in) cutting widths– Cutting bits held in exclusive conical quick-release tool holders and arranged in a triple-wrap flight pattern– Large, replaceable carbide-faced loading paddles effectively move milled material onto collecting conveyor– Standard 15 mm (0.6 in) tool tip spacing is optimal for high production and reduced wear– Triple tree tool arrangement on rotor ends reduces wear on rotor when maneuvering in the cut– Cat MasterGrade™ premium carbide bits available – Optional Cat Diamond Bits provide cutting life up to 80 times longer than conventional carbide bits, decreasing overall fuel consumption and reducing machine wear12INTEGRATED DESIGN– System communicates directly with position-sensing hydraulic cylinders, slope sensors and processors to ensure optimalprecisionCONTROL BOXES– LCD color touchscreen display with soft keys is durable andvisible in all light conditions– Intuitive interface is easy to understand and use– Supports multiple languages– Control boxes and sensors can be repositioned withoutreconfiguring settings– Full control over grade and slope can be attained from anycontrol boxCAT GRADE CONTROLEASY TO USE; HIGH PRECISION.BLUE: Averaged readings RED: Discarded readings1REFERENCE VERSATILITY1. Sonic Mounting Point2. Control Box Mounting Point3. Position-sensing Independently Controlled Side Plates4. Optional Position-sensing Hydraulically Controlled Inboard Ski2234SYSTEM VERSATILITY– System can utilize various references including sonics, contact sensors, position sensing hydraulic cylinders, wire rope sensors – Can be enhanced for full 3D operation– Sensors can be positioned in multiple inboard or external locations around the machineSONIC SENSORS– Sensor units feature five ceramic transducers– System discards the highest and lowest readings and averages remaining three for a true average– Each unit equipped with temperature sensor that compensates for fluctuations due to temperature change– Durable construction outlasts foil transducer design1113Each sensor has five transducers; the high and low readings are discarded and the remaining three are averaged for a true average reading.The high-capacity conveyors provide efficient removal of milled material and dust with outstanding discharge control.COLLECTING CONVEYOR– A wide opening and seamless 850 mm (33.5 in) wide belt efficiently clears rotor chamber– Reversible for easy clean out– Optional grease tensioner provides easy adjustment of belt alignment and tension WATER SPRAY SYSTEM– Water spray system provides lubrication and cools bits whilehelping to control dust– Spray system fed by 3400 L (898 gal) onboard tank; tank can be filled from top deck ports, rear fill valve, side fill valve or optional refill pump– Optional additional water spray system provides maximumlubrication, cooling and dust suppression– Onboard winterization system utilizes compressed air to purge water lines1415LOADING CONVEYOR– Aluminum covers and vinyl side panels reduce spillage and help control dust– Seamless 850 mm (33.5 in) wide belt provides heavy duty, high speed discharge– Variable belt speed optimizes speed to material type and production rate– Reversible for easy clean out– “Boost” feature provides a temporary surge in belt speed to help precisely place material– Loading conveyor folds to reduce length for transport– Loading conveyor swings 60 degrees from center position to the left or right60˚60˚OPTIONAL DUST ABATEMENT SYSTEM– Vacuum system ports to collecting conveyor housing and transition between collecting and loading conveyor to remove airborne particles– Augments dust suppression provided by water spray system – Discharges collected dust into the loading conveyor to facilitate removal from working area around machine – Maximizes dust removal capability when used with water spray system and optional additional water spray systemCAT GRADE AND SLOPE CONTROLSystem is integrated with the machine for maximum precision POWER SUN CANOPYDeploys or stows hydraulicallyWINDSCREENS FOR POWER SUN CANOPYCAT DIAMOND BITSLasts up to 80 times longer than conventional carbide bits ADDITIONAL LCD TOUCHSCREEN DISPLAYFor use to monitor machine functionsPRODUCT LINK, ADDITIONAL CONFIGURATIONSKeep track of your machine health, location or fleet use ADDITIONAL WATER SPRAY SYSTEMSecond system augments lubrication, bit cooling and dust suppression capabilities of the standard systemINBOARD AVERAGING SKIHydraulically controlled ski provides inboard reference for grade control systemROTOR TURNING DEVICEAssists with turning rotor during rotor serviceDUST ABATEMENT SYSTEMVacuum system ports to the transition area between the rotor chamber and the collecting conveyor as well as the transition between the collecting conveyor and the loading conveyor; dust is removed and expelled within the loading conveyor, where is it discharged with the milled materialREMOTE CAMERA, LOADING CONVEYORMounts to the discharge end of the loading conveyor; provides enhanced view of discharge loading REMOTE CAMERA, REARMounts to the rear of machine; provides enhanced view of area behind the machineREMOTE CAMERA, MAGNETIC MOUNTMounts magnetically to various locations; up to two magnetic cameras can be usedSUSPENSION SEATAdjustable seats installed on operator’s platformBIT BUCKET TRAYSTrays mount to rear crawlers and provide convenient storage for bit bucketsHIGH PRESSURE WASHDOWN SYSTEMHigh pressure hose and spray wand connect to onboard water tank to deliver high pressure water spray for convenient clean up WATER TANK TRANSFER PUMPWater pump provides additional options to fill onboard water tank FUEL TRANSFER PUMPFuel pump provides additional options to fill fuel tank WARNING BEACON, FIXEDAmber warning beacon mounts to one of two fixed locations on loading conveyor or rear of machineWARNING BEACON, MAGNETIC MOUNTAmber warning beacon can be magnetically mounted in multiple locations on the machineCOMMISSIONING SUPPORTCat technician provides machine introduction and training to key personnelOPTIONAL EQUIPMENT OPTIMIZE VERSATILITY, PRODUCTIVITY, COMFORT.161.Power Sun Canopy2. Inboard Averaging Ski3.Dust Abatement System4. Remote Camera, Loading Conveyor5.Remote Camera, Magnetic Mount6.Bit Bucket Trays7.High Pressure Washdown System8. Water Tank Transfer Pump3861245717EASY SERVICE DESIGNED RIGHT IN.Outstanding access to critical components and systems makes service and maintenance easier and faster. That keeps your machine where you need it: on the job.LARGE ACCESS DOORS AND PANELS– Designed to facilitate efficient service, reducing labor costs and service time– Quick and easy maintenance– Accessible pumps and components– Power hood opens to allow walk-in access– Visual indicators simplify routine service checks18HYDRAULIC SYSTEM– Manual overrides simplify troubleshooting by eliminatingfunctioning systems– Hydraulic hoses are cleanly routed and clamped for long-term reliability– Exposed hoses are wrapped in nylon sleeves for protectionagainst abrasion– Pressure test ports and oil sampling ports simplify hydraulicsystem diagnosisELECTRICAL SYSTEM– 24-volt system with 100 amp alternator– Color-coded and numbered electrical wiring simplifiestroubleshooting– Harnesses are wrapped in abrasion-resistant nylon braid ELECTRONIC CONTROL MODULES (ECM)– Monitors machine systems to ensure proper function andprecision– Provides warning indications via LCD touchscreen display when machine performance is substandard– Provides diagnostic information TELEMATICS: PRODUCT LINK™– Maximize up-time– Automatic machine location– Hour updates– Diagnostic codes– Schedule service at convenient times– Optional configurations availableLONG SERVICE INTERVALS– 500 hour engine oil service interval– 3,000 hour hydraulic oil service interval without oil sampling;6,000 hours with oil samplingACCESSORY DRIVE SYSTEM– Provides full operational control of auxiliary machine functions to enable assisted machine movement during maintenance or service– Facilitates assisted relocation of machine from live construction area to service area during emergency situations19Pallet ConcreteAsphalt or Asphalt off ConcreteAsphaltShallow 25 - 50 mm (1” - 2”)Moderate 75 - 125 mm (3” - 5”)Deep 150 mm (6” o r more)Puller Tool351-267844444292-510344444349-49464444316-23274444350-71994444Ø19.4Ø19.822182117217PROVEN BENEFITSMore efficiency, more productivity, lower fuel consumption and less wear on the machine. It all adds up to more profitability and growth for your company.– Last up to 80x longer than carbide tips, keeping crews more productive, month after month– Assure faster project completions– Provide you with a significant bidding advantage– Virtually eliminate labor costs for pick changes; eliminate unplanned, unproductive interruptions– Deliver proven fuel savings per ton of production– Enable faster milling speeds and increased productivity– Eliminate costly bit inventory, and the handling that goes with it– Require no rotation, crucial because half of carbide failures result when tools fail to turn– Create less vibration, increasing the life of planetaries, drive shafts, stub shafts, bearings and other parts and components– Increase track-pad life because the machine does not work as hard– Deliver a dramatically improved return on your mill investment through increased engagement– Extend life of moldboards through a consistent pattern; protect welded-on base blocks—and ultimately the drum Average life and exact tonnage is impacted by local aggregate and operating technique. Diamond Asphalt Bits last up to 45x the life of standard carbide bits and Diamond Extended Life Bits last up to 80x the life of standard carbide bits.STAY SHARP UP TO 80X CONVENTIONAL CARBIDE.2122SPECIFICATIONSHH23Weights shown are approximate and include:• Operating weights include coolants, lubricants, full fuel tank, full water tank and 75 kg (165 lb) operator.• Transport weights include coolants, lubricants, 50% full fuel tank and empty water tank.WeightPM820Operating weight 36 130 kg 79,630 lb Transport weight 32 230 kg71,035 lbPM822Operating weight 36 700 kg 80,887 lb Transport weight 32 800 kg 72,290 lbPM825Operating weight 37 500 kg 82,650 lb Transport weight33 600 kg 74,054 lbFuel Tank1108 L 288.1 gal Cooling System 104 L 27.5 gal Engine Oil 65 L 16.9 gal Hydraulic Oil 113 L 29.4 gal Water Tank3400 L898 galService Refill CapacitiesCat C18 ACERT Engine Gross power - ISO 14396 563 kW 755 hp Global emissions US EPA Tier 4 Final / EU Stage IVor Tier 3 / Stage IIIA / China Stage III equivalentOperating speed100 m/min 328 ft/min Maximum travel speed 5.9 km/h 3.7 mphPowertrainPM820 Milling Width2010 mm 79.1 in Number of Bits 170PM822 Milling Width 2235 mm 88 in Number of Bits 185PM825 Milling Width 2505 mm 98.6 in Number of Bits203Maximum Cutting Depth 330 mm 13 in Rotor Speeds100 / 109 / 118 rpmCutting SystemPower CanopyWindscreens for Power Canopy Inboard Averaging Ski CE CertificateAdditional Water Spray System Water Tank Transfer Pump Fuel Transfer Pump Dust Abatement System Cat Grade ControlRemote Camera (Front, Rear, or Magnet Mount)Product Link (optional configuration)Air-ride Operator’s Seats Drum Rotating Device Cat Diamond Bits Bit Bucket TraysMachine Commissioning SupportOptional EquipmentSPECIFICATIONSA Overall length, conveyor up14.52 m 47.62 ft B Maximum machine width - PM820, PM822 2.83 m 9.27 ft Maximum machine width - PM825 3.14 m 10.03 ft C Cutting width - PM820 2010 mm 79.1 in Cutting width - PM822 2235 mm 88 in Cutting width - PM8252505 mm 98.6 in D Maximum height, raised conveyor 5.23 m 17.17 ft E Height to optional canopy4.05 m 13.29 ft F Height, no canopy (canopy down) 3.00 m 9.84 ft G Maximum truck clearance 4.86 m 15.95 ft HConveyor swing± 60˚ from centerOperating DimensionsI Transport length12.43 m 40.79 ft J Transport width - PM820 2.50 m 8.2 ft Transport width - PM822 2.70 m 8.83 ft Transport width - PM825 3.01 m 9.88 ft K Length, track to track 6.69 m 21.95 ft L Length of base machine 8.33 m 27.33 ft FTransport height3.00 m 9.84 ftShipping DimensionsPM820, PM822 AND PM825 Cold Planers。

BOM表

瑞景泰生产BOM表
日期订单编号交货日期仓库——丝印数量制表产品名称物料交接卡丝印——切割数量审核订单数量批准切割——包装数量
时间
签字
时间
签字
时间
签字
仓库订单编号交货日期材质来料尺寸开料数量订单编号交货日期菲林编号制版要求网版第一次第二次第三次第四次第五次第六次第七次第八次切割部订单编号交货日期刀具第一次第二次第三次包装部订单编号交货日期保护膜正面背面背胶产品名称镭射遮光贴片泡棉订单数量包装膜备注保护膜产品名称备注订单数量备注菲林序号产品名称排版数量开料尺寸产品数量丝印部产品名称订单数量订单数量
颜色
特殊油部（不良概数统计）切割
包装
严重异常记录

和鹰真皮智能排料管理系统之性能剖析

其功率消耗只需
4 KW
．
极大程度
56
W W W c
．
h in
a a
ppa
r e
l
．
n c o r
．
c n
● 生产
一
一
一
一
一
一
一
一
L
一
一
一
一
一
一
一
一
一
一
一
一
一
一
：双投影仪和鹰 Y INM A X ：
I
具有两个高清晰投影
：：
’
仪
，
实现高效
、
快捷的排料
双切割机头
．
．
，
降
量进行质地等级分类
Ne
s t in
．
Le
a the r
低对工人技能的依赖
操作方便
．
g
排料软件进行生产计划与任务的科学
．
根据录入的详细裁片数据质地进行等级设置
Ne s t in g
．
根据皮料的
Y in
管理与安排
提高了效率
。
利用排料软件
Le
a the r
为与真皮裁剪机对接提供了精确的数据
，
进行自动化裁剪
自动排料
，
有效的提高排料效率
．
，
降
低对工人技能及熟练度的依赖
降低了人力．经数码相机拍撮与智能化电脑系统科学处理后的皮料数据

奔马自动裁床用途-概述说明以及解释

奔马自动裁床用途-概述说明以及解释1.引言1.1 概述概述自动裁床是一种在纺织行业广泛应用的设备，其主要功能是自动对布料进行裁剪，提高生产效率和裁剪精准度。

奔马自动裁床作为一种先进的自动裁剪设备，具有高效、精准、稳定的特点，被广泛应用于纺织行业中。

本文将介绍奔马自动裁床的工作原理、特点以及在纺织行业中的应用，旨在帮助读者更加深入了解该设备的用途和优势。

1.2文章结构文章结构部分应该包括以下内容：正文分为三个部分：自动裁床的工作原理、奔马自动裁床的特点以及奔马自动裁床在纺织行业的应用。

通过这三个部分的介绍，读者可以全面了解奔马自动裁床的用途及其在纺织行业中的重要性。

结合引言部分的概述和目的，可以帮助读者更好地理解奔马自动裁床的意义和价值。

在结论部分中，将总结自动裁床的优势，并展望奔马自动裁床未来的发展趋势，最后给出结语，为整篇文章画上完美的句点。

1.3 目的本文的主要目的是介绍奔马自动裁床在纺织行业中的应用及其重要性。

通过了解自动裁床的工作原理和奔马自动裁床的特点，我们可以更清楚地了解这种先进设备在纺织生产中的作用和价值。

同时，我们希望通过本文的撰写，让读者对奔马自动裁床有一个全面的了解，以便在实际生产中能够更好地应用和利用这项技术，提高生产效率和质量，推动纺织行业的发展。

2.正文2.1 自动裁床的工作原理自动裁床是一种通过计算机控制的机械设备，能够根据预先设定的裁剪方案，精确地进行裁剪操作。

其工作原理主要包括以下几个步骤：1. 采集数据：在裁剪前，需要将裁剪模板或图样输入到计算机系统中。

通过扫描或手动输入等方式，将图样的信息数字化，以便计算机进行处理。

2. 设定裁剪参数：根据所需裁剪的布料类型、尺寸和形状等要求，设置裁剪参数如裁刀速度、加工路径等。

3. 激光定位：在裁剪过程中，通过激光定位系统精确定位布料的位置和形状，确保裁剪的准确性和精度。

4. 刀具切割：根据预设的裁剪方案，自动裁床会通过激光或刀具进行裁剪操作。

F4560平板切割机用户手册说明书

1.T ap [settings] to enter the function menu of the setting page. There are：①page 1 (Camera ) (WiFi )( Post Cut Position ) (Array) (Show Point)②page 2 (Y key mode) (Go Right When Power On) (System Mode) (Scale) (LED)③page 3 (Alarm) (Screensaver) (Unit) (Language) (System Information)④(ARRAY) set to cut how many lines and columns.⑤(SHOW POINT) set the coordinate display or hide⑥(Y KEY MODE) Set the positive and negative movement in the y-axis direction .⑦(Go xx WHEN POWER ON ) set whether the carriage is automatically homing (it is invalid for flatbed cutter).⑦Press Start. The test shape, which is a square with a + inside, will be drawn on the paper and the camera will move over the test shape, take a photo, and display the photo on the control panel. If you cannot see the test shape clearly, press the LED button once so that it reads LED 50% and press the Get PIC button. Y ou should see three items in the photo: the test shape that was drawn with the pen, a red +, and the blue dashed +:(8)T ap your finger near the middle of the drawn test shape. This will move the red + to that location. Then press OK. Repeat this step until blue dashed + is near-perfectly centered in the test shape. ⑤Click the setting button on the plug-in to set the parameters required for transmission, generate and transmit files to the device;Marks generateFile Transfer interface Connecting settingU-Disk InterfaceU-Disk Content selectionOffset okOffset value istoo small Offest value is too large①the machine is real USB, no need to install driver, just connect the computer and machine directly by the USB cable. Tick “ USB”option ,①Prepare the PLT file from software, then copy it to your U disk andplug it directly into the machine. Go to machine home menu, and T ap “UDISK” , then tap “OPEN” and double click the file you want to cut ,⑤Click the setting button ( ）on the plug-in to pop up the 2. Function description of setting page①(Camera) Calibrate the camera for accuracy cutting.②(WiFi ) T o connect the machine to wifi network.③( POST CUT POSTION) set the position of the carriage when the cutting finished.Operation1、The Blade Length (also called Blade Exposure) is how much blade is exposed at the bottom of the blade holder. For optimal cutting, you want this length to match the thickness of the material or be just a tiny bit Longer.1、Blade Installation1、On the main screen, tap [x +], [x -], [y +], [y -] to move the blade to the position of the material to be cut. At this time, the blade position is the origin at the lower right corner of the figure to be cut. T icon(插原点图标）, then the origin setting is completed. When send file to cut, the machine will start cutting at this location.1.Prepare the File, click Icon.2.Click the color options to set creasing lines and cutting lines 4.Click [print options] and select 【cut contour 】 in [cutting tool presets]5.Click [Edit],tick [blade offset] input offset value and select [tool 1] in tool select ,then click [Apply]6.Click [fold contour] in cutting tool presets, click [Edit], uncheck [blade offset] and select[tool 0],then click [Apply]7.The 【fold contour】 should be in front of the [cut cotour] means creasing first then cutting. If not we can click the arrow the change the cutting order. Refer to below image:8.Click [save as PDF], and then click [cut] to export the PLT file3、Origin setting1. If need to pause the current cutting, tap [PAUSE] on main menuWhen the pause is effective, the background color of this key will turn red. At this time, tap [pause] again to continue cutting. When the job is paused, we can move carriage freely , When cutting is continued, 4、Pause,stop during cutting①When power on the machine , it will automatically enter to this home menu .There are two coordinate display areas, four movement keys and one coordinate clear key, six function control keys: [setting], [RECUT ],[UDISK ],[stop], [SPD/FOR] and [test].②T ap the following keys from the home menu to control themovement of the machine③T ap [←] the carriage will move to the left, and hold on this key it will continue to move to the left until the carriage been moved to the left limit switch position.④T ap 【↓】the carriage will move forward, and hold on this key it will2、【SCAN SETTINGS】①.Mark size: Default setting >10mm,if need to enlarge the scanning range ,we can tick “>15mm”②.AUTO SCAN: Default tick this option.③.INVERSE:This option can be ticked when we cut some .special reflective materials and the camera cannot read the marks.3、Calibration Process①Select SPD/FOR to select the head do you want to do calibrate.left head or right head or dual heads. If you need to use both head, then need to choose dual heads.②Insert the test pen into the head(Heads). Place the sheet of paper on the table.③Select SPD/FOR and set SPEED to ~ 8 and FORCE to ~ 30. Click on T est to verify that a square is clearly drawn. If it is too faint, increase FORCE as needed and repeat.④On the control panel, move the test pen over the sheet of paper.4、[OFFSET]①When the contour cutting is deviation,we can set this value to improve the cutting accuracy instead of re-calibrating the camera.What you‘ll need：Name of your home/office network，The password for your network，Carefully complete the following steps:①On the cutter’ control panel, tap Set and then select Wifi. ②Click on the Scan button and a list of the available networks will appear. Select your home/office Network,and then enter your PassWord then tap OK Next check the IP Address that will be assigned to the Cutter. The Skycut will automatically pick up the first three sets of digits from your router but will continue to display them as shown above. Y only need to decide if the last set, which should be defaulting to“200”, can be used. Use the “+” or “-“ buttons to make any needed changes ( 150~250)③Click on Apply and wait for several minutes while your router assigns this IP Address to the Skycut. Eventually, you will see Connected OK appear 6、Wifi connectionPower Cable Pen USB Cable Blade holder。

MB2003B拉腰机使用说明书

拉腰机Waistband setter（MB2003B ）使用说明书Instruction Manual常州智谷机电科技有限公司CHANGZHOU WISDOM &VALLEY ELECTRICAL TECHNOLOGY CO.,LTD 在使用本设备之前请先阅读本使用说明书.Please read the operation manual of the touchscreen interface before using the device请将本使用说明书放在便于查阅的地方保管Please keep this operation manual of touch screeninterface in convenient place forreference 2022.04.03版本信息/Version感谢购买IMB工业用缝纫机。

在使用此机器之前，请仔细阅读以下的说明，这样可以更好地帮到您了解此机器的相关操作。

这些说明是根据现行的条例明确阐述了正确的工作方法。

Thank you for purchasing this industrial sewing machine from IMBBefore using this automatic unit,please read the following instructions,which will help you tounderstand how the machine operates.These instructions illustrate the correct working methods to comply with current regulations.在没有得到IMB授权许可的前提下，此说明书的任何部分是不可以被复制或者转录的。

说明书的内容可能被修改，而不需预先通知。

No part of this manual may be copied or transcribed without requesting prior authorization from IMBThe contents of this manual may be subject to change without advance notification.我们将欣然接受各位提出的改进此说明书的任何建议和指示We are happy to receive suggestions and/or indications on ways we could improve this manual.本机介绍说明分为二部分，具体请参照《MB2003B拉腰机-使用说明书》、《MB2003B拉腰机-零件手册》。

裁床使用按键说明

4-1按键功能按键的分㈠区和鹰自动裁剪机共有25个按键和两个脚踏开关，分布在四个控制部分：拾料台控制区；主控制区；Y 导轨控制区；刚毛控制区㈡按键的功能1．拾料台控制区1) 名称：拾料台停止按钮状态：通电后此按钮为灯亮状态，拾料台运转时为灯灭状态。

功能：使拾料台停止运转。

操作：当拾料台运转过程中想停止时点击此按钮即可。

2) 名称：拾料台送回按钮状态：不进行“送入”操作时，此按钮为灯灭状态，进行“送入”操作时，此按钮为灯亮状态。

功能：使拾料台向刚毛方向运转。

操作：当拾料台在停止状态下，想使拾料台向刚毛方向运转时按一下此按钮即可。

注：此按键分为低速和高速，点击次数是奇数时为低速，点击次数是偶数时为高速。

1. 拾料台控制区 2. 主控制区3. Y 导轨控制区4. 刚毛控制区3)名称：单动联动选择旋钮（单动选择状态）功能：用来切换拾料台和刚毛是否进行联动。

注：此状态为单动，拾料台转动时刚毛处于停止状态，刚毛转动时拾料台处于停止状态。

操作：当白色标记线指向联动时，将此按键逆时针旋转90度自动切换到单动状态。

4)名称：单动联动选择旋钮（连动选择状态）功能：用来切换拾料台和刚毛是否进行联动。

注：此状态为联动，拾料台转动时刚毛随同一起转动，刚毛转动时拾料台也会随同一起转动。

操作：当白色标记线指向单动时，将此按键顺时针旋转90度自动切换到联动状态。

5)名称：紧急停止开关状态：当总电源开启通电后此开关处于常亮状态,当裁床电源开启控制开关“开”开启时,紧急停止开关为常灭状态。

功能：遇到紧急情况，想立刻停止裁床运行时，按下此开关裁床自动断电停止运行。

操作：当遇到紧急情况时，按下此开关即可。

注：按下后紧急停止开关为锁定状态，此时裁床电源开启控制开关“开”不能使用。

必须进行解锁。

解锁方法:：将紧急停止开关按照箭头方向顺时针旋转弹起后即可自动解锁。

注：非移动型H系列通常在拾料台、主控制区、Y导轨控制区、刚毛控制区各有一个急停按钮，功能相同，后不再介绍。

科普易能电脑裁床KP-N系列

武汉科普易能科技有限公司科普自动裁剪系统武汉科普易能科技有限公司版权声明本文件版权属于武汉科普易能科技有限公司任何形式的散播必须经过武汉科普易能公司的书面同意www.whkpyn. com武汉科普易能科技有限公司武汉科普易能科技有限公司目录第一部分公司简介第二部分 KP系列自动裁剪机特点介绍第三部分设备主要性能指标第四部分设备基本配置及主要特点第五部分报价及服务附件 1 自动裁剪系统的使用效益比较附件 2 客户自备设施附件 3 大批量裁剪裁床应用方案武汉科普易能科技有限公司武汉科普易能科技有限公司第一部分公司简介<<武汉科普>>是一家集研发、生产、销售、服务为一身的集团化、规模化、专业化的高新科技技术企业。

<<武汉科普>>于1998年成立，至今一直专注于研制解决各种材料切割的智能化，简单化，效率化，工具化的目标不懈奋斗着。

目前<<武汉科普>>下属武汉科普易能科技有限公司、武汉科普先锋科技有限公司、武汉科普易刻科技有限公司、三家分公司，一所智能切割研究院。

<<武汉科普>>专业提供金属材料、塑性材料、玻璃材料、柔性材料的全方位切割解决方案。

凭借智能切割研究院的逐年研发及多年切割设备制造经验，逐步形成“科普”系列智能切割设备,现主要产品包括数控等离子切割机、数控火焰切割机、数控激光切割机、数控雕铣机、全自动弯折机、全自动开槽机、全自动玻璃磨花机、全自动玻璃裁剪机、智能裁剪机等切割设备。

目前<<武汉科普>>产品已广泛分布国内外市场，国内主要分布在上海、广东、湖北、湖南、江苏、浙江、江西、福建、重庆、广西、贵州、河南、陕西、宁夏、安徽、内蒙古、云南等全国各大中小城市及地区，国外市场主要分布在韩国、越南、马来西亚、泰国、澳大利亚、美国、日本、德国、荷兰、约旦、沙特、印度等全球四十多个国家。