mastercam X5后处理文件

# It is designed to support some of the features of Mastercam X. This post DOES NOT
# support reading of the Machine Definition. For Machine Definition support use
#
#Axis substitution:
# Use the Rotary axis substitution by drawing the geometry flattened
# from the cylinder. The rotary axis button must be active for axis
# Rotation zero position is on the Z axis for rotation on Y axis.
# Rotation zero position is on the X axis for rotation on Z axis.
# The machine view rotated about the selected axis as a "single axis
# Programmers Note:
# CNC 07/11/05 - Initial post update for Mastercam X
# CNC 06/26/06 - Initial post setup for Mastercam X2
# CNC 02/26/07 - Modified pwcs
# 1 = Reference return is generated and G92 with the
# X, Y and Z home positions at each tool.
# 2 = WCS of G54, G55.... based on Mastercam settings.
# 'vmc' (vertical or horizontal) and 'rot_on_x' (machine relative
# axis of rotation).
# vmc = 1 (vertical machine) uses the top toolplane as the base machine
# 4 = Block Delete off = turn off block delete codes in NC lines
#
#Milling toolpaths (4 axis)
#Layout:
# The term "Reference View" refers to the coordinate system associated
[POST_VERSION] #DO NOT MOVE OR ALTER THIS LINE# V14.00 E1 P0 T1291792543 M14.00 I0
# Post Name : MPFAN
# Product : MILL
# Machine Name : GENERIC FANUC
#
# mi2 - Absolute or Incremental positioning at top level
# 0 = absolute
# 1 = incremental
#
# mi3 - Select G28 or G30 reference point return.
# 'rot_ccw_pos' to indicate the signed direction. Always set the work
# origin at the center of rotation.
#
#Toolplane Positioning:
# Create the Cplane and Tplane as the rotation of the machine view about
#
# Associated File List$
#
# Associated File List$
#
# --------------------------------------------------------------------------
# Revision log:
# --------------------------------------------------------------------------
# 0 = G28, 1 = G30
#
#Canned text:
# Entering cantext on a contour point from within Mastercam allows the
# following functions to enable/disable.
# Full 4 axis toolpaths can be generated from various toolpaths under the
# substitution information to be output to the NCI file. The radius of
# the rotary diameter is added to all the Z positions at output.
#
#Simultaneous 4 Axis (11 gcode):
# existing canned text logic.
# - Support for seperate XY, XZ and YZ plane/arc variables (see Arc page in CD)
# - Additional functionality added to Generic Fanuc 4X Mill.PST - Use this post for more enhanced output.
# view.
# vmc = 0 (horizontal machine) uses the front toolplane as the base machine
# view.
# Relative to the machine matrix -
# Rotation zero position is on the Z axis for rotation on X axis.
# Polar positioning is offered in Mastercam 3 axis toolpaths through the
# rotary axis options dialog. The selected toolpath is converted to angle
# and radius position. The axis of rotation is forced to zero.
# the selected axis of rotation. The toolplane is used to calculate
# the position of the rotary axis. This is the default setting.
#
#3 Axis Rotary (Polar)
# with the Top view (Alt-F9, the upper gnomon of the three displayed).
# Create the part drawing with the axis of rotation about the axis
# of the "Reference View" according to the setting you entered for
#
# Following Misc. Integers are used:
#
# mi1 - Work coordinate system
# 0 = Reference return is generated and G92 with the
# X, Y and Z home positions at file head.
# CNC 11/02/07 - Added prv_shftdrl$ = zero
# CNC 04/08/08 - X3 release - no changes made
#
# --------------------------------------------------------------------------
# Cantext value:
# 1 = Program Stop = output the "M0" stop code
# 2 = Optional Stop = output the "
# 3 = Block Delete on = turn on block delete codes in NC lines
# Executable : MP 11.0
#
# WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO
# THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE.
# in the post will not effect output. These values are only processed during the update post routine.