19-213UYC中文资料
SIMATIC NET 工业以太网交换机 SCALANCE XC-200 操作说明说明书
SIMATIC NET工业以太网交换机SCALANCE XC-200操作说明02/2023法律资讯警告提示系统为了您的人身安全以及避免财产损失，必须注意本手册中的提示。
人身安全的提示用一个警告三角表示，仅与财产损失有关的提示不带警告三角。
警告提示根据危险等级由高到低如下表示。
危险表示如果不采取相应的小心措施，将会导致死亡或者严重的人身伤害。
警告表示如果不采取相应的小心措施，可能导致死亡或者严重的人身伤害。
小心表示如果不采取相应的小心措施，可能导致轻微的人身伤害。
注意表示如果不采取相应的小心措施，可能导致财产损失。
当出现多个危险等级的情况下，每次总是使用最高等级的警告提示。
如果在某个警告提示中带有警告可能导致人身伤害的警告三角，则可能在该警告提示中另外还附带有可能导致财产损失的警告。
合格的专业人员本文件所属的产品/系统只允许由符合各项工作要求的合格人员进行操作。
其操作必须遵照各自附带的文件说明，特别是其中的安全及警告提示。
由于具备相关培训及经验，合格人员可以察觉本产品/系统的风险，并避免可能的危险。
按规定使用 Siemens 产品请注意下列说明：警告Siemens 产品只允许用于目录和相关技术文件中规定的使用情况。
如果要使用其他公司的产品和组件，必须得到 Siemens 推荐和允许。
正确的运输、储存、组装、装配、安装、调试、操作和维护是产品安全、正常运行的前提。
必须保证允许的环境条件。
必须注意相关文件中的提示。
商标所有带有标记符号 ® 的都是 Siemens AG 的注册商标。
本印刷品中的其他符号可能是一些其他商标。
若第三方出于自身目的使用这些商标，将侵害其所有者的权利。
责任免除我们已对印刷品中所述内容与硬件和软件的一致性作过检查。
然而不排除存在偏差的可能性，因此我们不保证印刷品中所述内容与硬件和软件完全一致。
印刷品中的数据都按规定经过检测，必要的修正值包含在下一版本中。
Siemens AGDigital Industries Postfach 48 4890026 NÜRNBERG C79000-G8952-C442-14Ⓟ 02/2023 本公司保留更改的权利Copyright © Siemens AG 2016 - 2023.保留所有权利目录1简介 (7)2安全须知 (15)3安全建议 (17)4设备描述 (25)4.1产品总览 (25)4.2设备视图 (31)4.2.1SCALANCE XC206-2 (ST/BFOC) (31)4.2.2SCALANCE XC206-2 (SC) (32)4.2.3SCALANCE XC206-2G PoE (33)4.2.4SCALANCE XC206-2SFP (34)4.2.5SCALANCE XC208 (35)4.2.6SCALANCE XC208G PoE (36)4.2.7SCALANCE XC216 (37)4.2.8SCALANCE XC216-3G PoE (38)4.2.9SCALANCE XC216-4C (38)4.2.10SCALANCE XC224 (40)4.2.11SCALANCE XC224-4C (41)4.3附件 (41)4.4SELECT/SET 按钮 (47)4.5LED 指示灯 (49)4.5.1总览 (49)4.5.2“RM”LED (50)4.5.3“SB”LED (50)4.5.4“F”LED (50)4.5.5LED“DM1”和“DM2” (51)4.5.6LED“L1”和“L2” (51)4.5.7端口 LED (52)4.6C-PLUG (54)4.6.1C-PLUG 的功能 (54)4.6.2更换 C-PLUG (56)4.7组合端口 (57)4.8以太网供电 (PoE) (58)4.8.1符合标准的电源和电压范围 (58)4.8.2设备的 PoE 属性 (59)4.8.3电源传输和引脚分配 (30 W) (61)SCALANCE XC-200目录4.8.4电源传输和引脚分配 (60 W) (62)4.8.5组态 (62)5组装和拆卸 (63)5.1安装的安全注意事项 (63)5.2关于 SFP 收发器的一般说明 (66)5.3安装类型 (66)5.4在 DIN 导轨上安装 (67)5.4.1基于固定板的凹顶导轨安装 (67)5.4.2无固定板时的凹顶导轨安装 (69)5.5在标准 S7-300 导轨上安装 (70)5.5.1在带有固定板的标准导轨 S7-300 上安装 (70)5.5.2在不带固定板的标准导轨 S7-300 上安装 (71)5.6在标准导轨 S7-1500 上安装 (72)5.6.1在带有固定板的标准导轨 S7-1500 上安装 (72)5.6.2在不带固定板的标准导轨 S7-1500 上安装 (74)5.7基于固定板的墙式安装 (75)5.8更改固定销的位置 (76)5.9拆卸 (77)6连接 (79)6.1不使用 PoE 的设备的安全注意事项 (79)6.2PoE 设备的安全注意事项 (80)6.3有关在危险场所使用的安全注意事项 (82)6.4附加说明 (85)6.5接线规则 (86)6.624 V DC 电源 (87)6.754 V DC 电源 (88)6.8信号触点 (90)6.9功能性接地 (91)6.10串口 (92)6.11工业以太网 (94)6.11.1电气 (94)6.11.2光纤 (95)SCALANCE XC-200目录7维护和清洁 (97)8故障排除 (99)8.1使用 TFTP 下载新固件（无需 WBM 和 CLI） (99)8.2恢复出厂设置 (100)9技术规范 (101)9.1SCALANCE XC206-2 (ST/BFOC) 的技术规范 (101)9.2SCALANCE XC206-2 (SC) 的技术规范 (104)9.3SCALANCE XC206-2G PoE 的技术规范 (107)9.4SCALANCE XC206-2G PoE (54 V) 的技术规范 (110)9.5SCALANCE XC206-2G PoE EEC (54 V) 的技术规范 (113)9.6SCALANCE XC206-2SFP 的技术规范 (116)9.7SCALANCE XC206-2SFP G 的技术规范 (119)9.8SCALANCE XC206-2SFP EEC 的技术规范 (122)9.9SCALANCE XC206-2SFP G EEC 的技术规范 (125)9.10SCALANCE XC208 的技术规范 (128)9.11SCALANCE XC208G 的技术规范 (130)9.12SCALANCE XC208G PoE 的技术规范 (132)9.13SCALANCE XC208G PoE (54 V) 的技术规范 (134)9.14SCALANCE XC208EEC 的技术规范 (136)9.15SCALANCE XC208G EEC 的技术规范 (138)9.16SCALANCE XC216 的技术规范 (140)9.17SCALANCE XC216EEC 的技术规范 (142)9.18SCALANCE XC216-3G PoE 的技术规范 (144)9.19SCALANCE XC216-3G PoE (54 V) 的技术规范 (146)9.20SCALANCE XC216-4C 的技术规范 (150)9.21SCALANCE XC216-4C G 的技术规范 (153)9.22SCALANCE XC216-4C G EEC 的技术规范 (156)9.23SCALANCE XC224 的技术规范 (159)9.24SCALANCE XC224-4C G 的技术规范 (161)9.25SCALANCE XC224-4C G EEC 的技术规范 (164)9.26机械稳定性（运行时） (167)SCALANCE XC-200目录9.27射频辐射符合 NAMUR NE21 标准 (167)9.28电缆长度 (167)9.29交换特性 (168)10尺寸图 (171)11证书和认证 (179)索引 (189)SCALANCE XC-200简介1操作说明的用途这些操作说明适用于 SCALANCE XC-200 系列产品的安装和连接。
TAP-213系列产品的固件更新说明书
Firmware for TAP-213 Series Release NotesSupported Operating SystemsApplicable Products• AeroLink now blocks traffic in the IDLE state to prevent short looping.• Added a dB value to the AeroLink threshold.• Added B-Mode in Sniffer mode.• The AeroLink LAN link-interval has been increased to 5 seconds before real traffic is processed to avoid loops.EnhancementsN/ATAP-213 series• The system log now records Wi-Fi DFS channel change events.• Added support for fixed CCA settings.• Added support for the remote diagnostics feature on the Troubleshooting page.• Added a Clear Log option to the Maintenance page.• Added support for Moxa Wireless Protect.• Added Login/Authentication Failure Message settings in System Information.• Added IP Aliasing, Management IP Address, and Management subnet mask settings to Network Settings.• Added the Management Frame Encryption Password setting in Basic WLAN Setup.• Added additional Multicast rate options for Advanced Wireless Settings.• Added the option to enable or disable CCA.• Added the option to enable or disable proxyArp for Client-router Mode in Advanced Wireless Settings.• Added an SNR option for Roaming and AP candidate thresholds to Advanced Wireless Settings.• Added a client-to-AP retry count (1-4) option to Advanced Wireless Settings.• Added support for a bidirectional Keep Alive mechanism for controller-based roaming.• Added a bi-directional Keep Alive Check option.• Added Alive Check interval and count settings.• Added a LAN (Management) section to VLAN Settings.• Added Port Forwarding Settings to NAT/Port Forwarding.• Added support for user account authentication in SNMP Agent.• Added support for Multicast IP settings.• Added an option to enable or disable Link Fault Pass-Through for Client mode in Link Fault Pass-through.• Added Turbo roaming events to System Log Event Types and Syslog Event Types.• Added Coordinator Status events to Notification Event Types and Trap Event Types.• Added Coordinator Status events to Relay Event Types • Added the SMTP Port and SMTP Security Mode options to E-mail Server Settings.• Added the Outgoing Packets and Incoming Packet status to Wireless LAN Status.• Added an Export Log button to the DHCP Client List page.• Added a page range to System Logs.• Added the System, Account, ARP, Bridge, and LLDP Status to Status.New FeaturesBugs Fixed• Added a null SSID check.• Added auto/manual refresh on the RSTP status page.• Adjusted the accuracy of the transmission (tx) rate to the second decimal.• Increased the number of Port Forwarding rule entries from 16 to 32.• Increased the number of MAC Filter, IP Protocol Filter, and TCP/UDP Port Filter entries from 8 to 32.• Cybersecurity enhancements.• Enhanced the group check logic for WLAN, 50 ms roaming, security mode, and WAC settings.• Network information (including IP, subnet mask, and gateway) has been added to the “Reboot” and “Save Configuration and Restart” pages to show the expected network settings after performing these tasks.• Added support for individual policies for MAC Filter, IP protocol Filter, and TCP/UDP Port Filter rule entries.• Added an ARP filter option for IP Protocol Filter entries.• Wireless clients are sometimes unable to connect to the AP during startup.• Wireless clients time out during authentication if using WEP encryption,• Setting a null configuration triggers a false configuration change.• The power saving status of wireless clients is not handled correctly by the AP during roaming.• Changing IP address settings does not trigger the system to restart.• Some tx power values for N mode are inaccurate.• AeroLink sometimes reinitializes unexpectedly.• Failed SSH login does not trigger an event log.• No response when using the Wireless Search Utility to configure IP settings.• RSSI report handoff messages are in an incorrect format.• Web browsers will redirect users to a wrong address If changes to IP settings are not saved.• The DHCP maximum numbers of users setting is not applied correctly.• The order of txpower settings is incorrect.• The DHCP status would appear incorrect in the Wireless Search utility.• The rate tables for A/G are incorrect.• SNMP does not return a “N/A” response if certain wireless status parameters values are blank.• Wireless clients are unable to reauthorize after being disconnected in enterprise mode during controller-based roaming.• The device may reboot automatically while upgrading the firmware.• Wireless clients do not leave an AP after receiving a DEAUTH message.• The system log cannot be exported when using the Firefox browser.• The name of the wlanSignal SNMP node is incorrect.• Language errors on the Turbo Chain status page.• ARP Request messages in Client-mode are in an incorrect format.NotesChanges• Changed the default device name to “Model name_xx:yy:zz”, where xx:yy:zz are the last 3 bytes of the device’s MAC address.• Changed the RF type default value from “B/G/N Mixed” to “2.4G N”.• Changed the Wireless default state on the Operation Mode page from “enabled” to “disabled”.• Changed the default value of the Client lease time for the DHCP server from 5 days to 14400 min.• Changed the default state of HTTP and Telnet on the Console Settings page from “enabled” to “disabled“.• Renamed “Multicast rate” to “Multicast and broadcast rate” in the web interface.• Removed the ability to press Enter to trigger the ping function.N/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/A• KRACK (Key Reinstallation Attack) WPA2, [CVE-2017-13077]: Issue Descriptions: Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Pairwise Transient Key (PTK) and Temporal Key (TK) during the four-way handshake, allowing an attacker within radio range to replay, decrypt, or spoof frames.• KRACK (Key Reinstallation Attack) WPA2, [CVE-2017-13078]: Issue Descriptions: Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Group Temporal Key (GTK) during the four-way handshake, allowing an attacker within radio range to replay frames from access points to clients.• KRACK (Key Reinstallation Attack) WPA2, [CVE-2017-13080]: Issue Descriptions: Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Group Temporal Key (GTK) during the group key handshake, allowing an attacker within radio range to replay frames from access points to clients.EnhancementsN/ATAP-213-EU-CT-T, TAP-213-JP-CT-T, TAP-213-US-CT-TN/ANew FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/AN/AEnhancementsN/ATAP-213-EU-CT-T, TAP-213-JP-CT-T, TAP-213-US-CT-T • First release.New FeaturesN/AN/A。
MAX213CAI-T中文资料
General DescriptionThe MAX200–MAX211/MAX213 transceivers are designed for RS-232 and V.28 communication inter-faces where ±12V supplies are not available. On-board charge pumps convert the +5V input to the ±10V need-ed for RS-232 output levels. The MAX201 and MAX209operate from +5V and +12V, and contain a +12V to -12V charge-pump voltage converter.The MAX200–MAX211/MAX213 drivers and receivers meet all EIA/TIA-232E and CCITT V.28 specifications at a data rate of 20kbps. The drivers maintain the ±5V EIA/TIA-232E output signal levels at data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification.The 5µW shutdown mode of the MAX200, MAX205,MAX206, and MAX211 conserves energy in battery-powered systems. The MAX213 has an active-low shut-down and an active-high receiver enable control. Two receivers of the MAX213 are active, allowing ring indica-tor (RI) to be monitored easily using only 75µW power.The MAX211 and MAX213 are available in a 28-pin wide small-outline (SO) package and a 28-pin shrink small-outline (SSOP) package, which occupies only 40% of the area of the SO. The MAX207 is now avail-able in a 24-pin SO package and a 24-pin SSOP. The MAX203 and MAX205 use no external components,and are recommended for applications with limited circuit board space.ApplicationsComputersLaptops, Palmtops, Notebooks Battery-Powered Equipment Hand-Held Equipment Next-Generation Device Features ♦For Low-Cost Applications:MAX221E: ±15kV ESD-Protected, +5V, 1µA, Single RS-232 Transceiver with AutoShutdown™♦For Low-Voltage and Space-Constrained Applications:MAX3222E/MAX3232E/MAX3237E/MAX3241E/MAX3246E: ±15kV ESD-Protected, Down to 10nA,+3.0V to +5.5V, Up to 1Mbps, True RS-232Transceivers (MAX3246E Available in UCSP™Package)♦For Space-Constrained Applications:MAX3228E/MAX3229E: ±15kV ESD-Protected,+2.5V to +5.5V, RS-232 Transceivers in UCSP ♦For Low-Voltage or Data Cable Applications:MAX3380E/MAX3381E: +2.35V TO +5.5V, 1µA,2Tx/2Rx RS-232 Transceivers with ±15kV ESD-Protected I/O and Logic Pins ♦For Low-Power Applications:MAX3224E–MAX3227E/MAX3244E/MAX3245E:±15kV ESD-Protected, 1µA, 1Mbps, +3.0V to+5.5V, RS-232 Transceivers with AutoShutdown Plus™MAX200–MAX211/MAX213+5V , RS-232 Transceivers with 0.1µF External Capacitors ________________________________________________________________Maxim Integrated Products 119-0065; Rev 6; 10/03For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at 1-888-629-4642, or visit Maxim’s website at .Ordering Information appears at end of data sheetAutoShutdown, AutoShutdown Plus, and UCSP are trademarks of Maxim Integrated Products, Inc.MAX200–MAX211/MAX213+5V , RS-232 Transceiverswith 0.1µF External Capacitors______________________________________________________________________________________19Ordering Information*Contact factory for dice specifications.M A X 200–M A X 211/M A X 213+5V , RS-232 Transceiverswith 0.1µF External Capacitors Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.20____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600©2003 Maxim Integrated ProductsPrinted USAis a registered trademark of Maxim Integrated Products.Package Information(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to /packages .)。
合肥滨湖新区北涝圩污水处理厂
合肥市滨湖新区北涝圩污水处理厂提标改造工程--设备采购及安装招标技术规范中国市政工程西南设计研究总院有限公司2018年3月目录1概述 (25)1.1概况 (25)1.1.1项目简述 (25)1.1.2招标说明 (27)1.1.3本技术规定范围 (27)1.1.4投标人资格要求 (28)1.1.5本合同的性质及工程范围 (28)1.1.6与其他承包人的合作 (29)1.1.7与土建工程的分界面 (29)1.1.8电气设备与其他承包人的分界面 (30)1.1.9仪控设备与其他承包人的分界面 (30)1.2现场气候条件及地形地质 (30)1.3条例、专利及语言 (31)1.3.1条例 (31)1.3.2专利 (31)1.4参照标准的说明 (31)1.4.1参照标准 (31)1.4.2标准缩写 (32)1.5图纸和技术文件 (33)1.5.1图纸通用标准 (33)1.5.2招标图纸 (34)1.5.3投标图纸 (34)1.5.4合同图纸 (34)1.5.5承包人提交的技术文件和图纸 (34)1.5.5.1设备详情提交 (35)1.5.5.2技术文件和图纸 (35)1.5.6图纸认可程序 (37)1.5.7现场施工图纸 (38)1.5.8承包人的竣工图和竣工资料 (39)1.5.9设备制造方式和安装 (40)1.5.10设计草图 (40)1.6随机备件 (40)1.7检测、维修设备及专用工具 (41)1.8售后服务 (41)1.9备件供应 (41)1.10临时工程设计 (41)1.11允许现场工作时间 (42)1.12软件程序 (42)1.13会议、报告及联络 (42)1.14开工通知 (42)1.15工棚、宿舍及卫生间 (43)1.16现场调查记录 (43)1.17气象资料 (43)1.18基准面 (45)1.19噪音 (45)1.20标牌及告示语言 (45)1.21合同标志牌 (46)1.22警示牌 (46)1.23现有设施的保护 (46)1.24许可证 (46)1.25材料和材料测试 (47)1.25.1总则 (47)1.25.2材料供应商 (47)1.25.3天然材料 (47)1.25.4特定用途的材料 (48)1.25.5样品 (48)1.25.6制造商和承包人的材料测试证书 (48)1.25.7测试的设备 (48)1.25.8承包人进行的测试 (49)1.26包装和保护 (49)1.27运输 (50)1.28设备的保护和放置 (50)1.29临时工地使用之后的恢复 (50)1.30对公路产生的影响 (51)1.31工程对邻近财产造成影响 (51)1.32场区道路及通道 (51)1.33健康和安全 (51)1.33.1概述 (51)1.33.2健康和安全政策 (52)1.34政策内的业务法规 (52)1.35安全员 (53)1.36流行病及危险状况 (53)1.37急救 (53)1.38赔偿人员或财产损失的要求 (53)1.39工程施工期间的临时性服务 (54)1.40临时围墙 (54)1.41开工 (54)1.42摄影 (54)1.43合同技术谈判和设计联络会 (55)1.44施工安全提示 (55)1.45紧急情况的处理 (56)1.46公共宣传 (56)1.47广告 (56)1.48操作及维护手册 (56)1.48.1总述 (56)1.48.2设备说明手册 (58)1.48.3维修说明手册 (58)1.48.4操作说明手册 (59)1.48.5简明数据手册 (59)1.48.6承包人的备选方案 (59)1.48.7技术规格偏离 (59)1.49培训 (60)1.49.1业主单位职员的培训 (60)1.49.2计划和提交 (61)1.50缺陷责任期 (61)1.51供电报批 (62)1.52设备的测试及检验 (62)1.52.1出厂前的测试及检验 (62)1.52.2安装过程中的测试及检验 (62)1.53试车过程中的测试及检验 (64)1.53.1单机试车 (64)1.53.2联动试车 (65)1.53.3试运行 (66)1.53.4测试和检验的其他要求和说明 (67)1.54保证性测试 (68)1.54.1总则 (68)1.54.2保证性测试 (68)1.54.2.1概述 (68)1.54.3噪音 (68)1.54.4生物反应池 (69)1.54.4.1污泥浓缩脱水机房 (73)1.54.4.2高效沉淀池 (73)1.54.4.3反硝化深床滤池 (74)1.54.5保证性测试的其他要求及说明 (74)1.55移交 (74)1.55.1移交记录 (74)1.55.2移交 (75)1.56设备的检验 (75)1.57对卖方的其他要求 (75)2机械设备 (77)2.1机械设备一般技术规定 (77)2.1.1材料、通用件及防腐要求 (77)2.1.2材料 (77)2.1.3铸件 (77)2.1.4焊接 (78)2.1.5锻件 (78)2.1.5.1平衡件 (78)2.1.5.2螺母、螺钉、垫圈和螺栓 (79)2.1.5.3紧固螺栓 (79)2.1.5.4润滑 (79)2.1.5.5金属构件的装涂保护 (80)2.1.5.6铭牌，标签和警告牌 (82)2.1.5.7安全罩 (82)2.1.5.8管道工程 (83)2.1.5.9铸铁管以及配件 (83)2.1.5.10钢管及异型钢管 (85)2.1.5.11镀锌钢管 (85)2.1.5.12UPVC管和配件 (85)2.1.5.13铜管压力配件 (86)2.1.5.14化学药剂管和软管 (86)2.1.5.15接头 (86)2.1.5.16管道连接器（伸缩接头） (86)2.1.5.17齿轮箱 (87)2.1.5.18压力表具 (88)2.1.5.19安全链条 (88)2.1.5.20梯子和楼梯 (88)2.1.5.21工业走道板和踏脚板 (89)2.1.5.22扶手 (89)2.2通用设备与闸门类设备一般技术规定 (90)★本章节为通用设备描述，其中电气控制系统是针对新建箱体部分的设备的要求。
SAE AS 21921C-2010
THE INITIAL SAE PUBLICATION OF THIS DOCUMENT WAS TAKEN DIRECTLY FROM U.S. MILITARY STANDARD MS21921. THIS SAE STANDARD RETAINS THE SAME PART NUMBERS ESTABLISHED BY THE ORIGINAL MILITARY DOCUMENT.
DASH
NO
F
/8/
MIN
-2 .360
-3 .366
-4 .431
-5 .444 -6 .422 -8 .516
-10 .578 -12 .562 -16 .562
-20 .562 -24 .562 -32 .562
G ±.010 .425 .429 .547
.562 .578 .609
.687 .687 .687
REAFFIRMED 2007-07
ISSUED 1998-08
FIGURE 1 - NUT, SLEEVE COUPLING, FLARELESS
SAE values your input. To provide feedback on this Technical Report, please visit /technical/standards/AS21921C
/6/ CIRCULAR SURFACES OF DIAMETERS E, K, AND THREAD T SHALL BE CONCENTRIC WITHIN .005.
7. INTERCHANGEABILITY RELATIONSHIP: MS21917 AND MS21921 PARTS IDENTIFIED BY THE SAME DASH NUMBERS ARE FUNCTIONALLY INTERCHANGEABLE. USE MS21921 AND MS21922 AS ASSEMBLY WHEN SUBSTITUTING FOR MS21917 AND MS21918.
SAE J1939-21-cn
确认......................................................................................................................... 18
群功能..................................................................................................................... 20
5.1.1 SAE J1939 消息帧格式（“CAN 2.0B”扩展帧格式） ...........................................6
5.1.2 参数群编号（PGN）...............................................................................................9
消息类型................................................................................................................. 16
命令......................................................................................................................... 16
路面车辆推荐操作规程（被采纳为美国国家标准） SAE J1939-21：
（R）数据链路层
前言
本系列 SAE 推荐操作规程是由卡车及客车电子电气委员会所属的卡车及客车控制及通 信小组委员会制定的。该小组委员会的目标是针对电控单元的需求、设计和使用，提交消息 报告、制定推荐操作规程。这些电控单元在汽车部件之间传递着电子信号和控制信息。本规 程的使用不限于卡车和客车应用，其对于其他的应用也可以提供直接的支持，正如已在建筑 及农业设备和固定式的动力系统。
CMY213中文资料
CMY 213
7 65 8
34 12
VPW05982
Type CMY 213
Marking M6s
Ordering Code (tape and reel)
GC
8.0
FSSB
–
RFIrl/IFOrl –
9.5 –
8
–
10 –
3rd Order Input Intercept Point
IIP3
8
10 –
LO-RF Isolation
Iso
–
10 –
Unit
mA
dB dB dB
dBm dB
*Important Note: During production, the RF performance at PCS frequencies is screened. The passed devices also achieve the specified RF performance at cellular frequencies.
GND
EHT09227
Figure 2 Test Circuit
Data Sheet
5
2001-01-01
External Components for Cellular Frequencies
fRF = 850 MHz; fLO = 740 MHz; fIF = 110 MHz
Capacitors
cies for PLO = – 5 dBm (operation conditions: 3 V, 8 mA; fRF = 850 MHz; fLO = 740 MHz):
19-213GHC-YR1S23T;中文规格书,Datasheet资料
Technical Data Sheet0603 Package Chip LED (0.6 mm Height)19-213/GHC-YR1S2/3T Features․Package in 8mm tape on 7〞diameter reel.․Compatible with automatic placement equipment.․Compatible with infrared and vapor phase reflowsolder process.․Mono-color type.․Pb-free.Descriptions․The 19-213 SMD Taping is much smaller thanlead frame type components, thus enable smallerboard size, higher packing density, reducedstorage space and finally smaller equipment to beobtained.․Besides, lightweight makes them ideal forminiature applications. etc.Applications․Automotive: backlighting in dashboard and switch.․Telecommunication: indicator and backlighting intelephone and fax.․Flat backlight for LCD, switch and symbol.․General use.Device Selection GuideChipLens Color Part No.ColorMaterial Emitted19-213/GHC-YR1S2/3T InGaN Brilliant Green Water Clear19-213/GHC-YR1S2/3TNote: The tolerances unless mentioned is ±0.1mm ,Unit = mm19-213/GHC-YR1S2/3T Absolute Maximum Ratings (Ta=25℃)Parameter SymbolRatingUnitReverse Voltage V R 5 VForward Current I F 25 mAOperating Temperature Topr -40 ~ +85 ℃Storage Temperature Tstg -40 ~ +90 ℃Soldering Temperature Tsol260(for 5 second)℃Electrostatic Discharge ESD 150 VPower Dissipation Pd 110 mWPeak Forward Current(Duty 1/10 @1KHz)I FP 100 mAElectro-Optical Characteristics (Ta=25℃)Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 112 ---- 285 mcdViewing Angle2θ1/2 ----- 120 ----- degPeak Wavelengthλp ----- 518 ----- nmDominant Wavelengthλd520 ----- 535 nmSpectrum RadiationBandwidth△λ----- 35 ----- nm Forward Voltage V F----- 3.5 4.0 VI F=20mAReverse Current I R ----- ----- 50 μA V R=5V Notes:1.Tolerance of Luminous Intensity ±10%2.Tolerance of Dominant Wavelength ±1nm3.Tolerance of Forward Voltage ±0.1V19-213/GHC-YR1S2/3T Bin Rang Of Dom. WavelengthMin Max Unit Condition Group BinX 520 525Ynm I F=20mAY 525 530Z 530 535Bin Rang Of Luminous IntensityBin Min Max Unit ConditionR1 112 140R2 140 180mcd I F=20mAS1 180 225S2 225 285Notes:1.Tolerance of Luminous Intensity ±10%2.Tolerance of Dominant Wavelength ±1nm3.Tolerance of Forward Voltage ±0.1V19-213/GHC-YR1S2/3T19-213/GHC-YR1S2/3T Label explanationCAT:LuminousREF:Reel DimensionsNote:19-213/GHC-YR1S2/3T19-213/GHC-YR1S2/3TReliability Test Items And ConditionsThe reliability of products shall be satisfied with items listed below. Confidence level ：90% LTPD ：10%No. Items Test Condition Test Hours/Cycles SampleSizeAc/Re1 Reflow Soldering Temp. : 260℃±5℃Min. 5sec. 6 Min.22 PCS.0/1 2 Temperature Cycle H : +100℃ 15min∫ 5 minL : -40℃ 15min 300 Cycles 22 PCS.0/13 Thermal Shock H : +100℃ 5min∫ 10 secL : -10℃ 5min300 Cycles 22 PCS.0/1 4High TemperatureStorageTemp. : 100℃ 1000 Hrs. 22 PCS.0/1 5Low TemperatureStorage Temp. : -40℃ 1000 Hrs. 22 PCS.0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS.0/1 7High Temperature /High Humidity85℃/ 85%RH1000 Hrs.22 PCS.0/119-213/GHC-YR1S2/3TPrecautions For Use1. Over-current-proofCustomer must apply resistors for protection , otherwise slight voltage shift will cause bigcurrent change ( Burn out will happen ).2. Storage2.1 Do not open moisture proof bag before the products are ready to use.2.2 Before opening the package, the LEDs should be kept at 30℃or less and 90%RH or less.2.3 The LEDs should be used within a year.2.4 After opening the package, the LEDs should be kept at 30℃or less and 70%RH or less.2.5 The LEDs should be used within 168 hours (7 days) after opening the package.2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded thestorage time, baking treatment should be performed using the following conditions.Baking treatment : 60±5℃for 24 hours.3. Soldering Condition3.1 Pb-free solder temperature profile3.2 Reflow soldering should not be done more than two times.3.3 When soldering, do not put stress on the LEDs during heating.3.4 After soldering, do not warp the circuit board.19-213/GHC-YR1S2/3T4.Soldering IronEach terminal is to go to the tip of soldering iron temperature less than 280℃for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.5.RepairingRepair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether分销商库存信息: EVERLIGHT19-213/GHC-YR1S2/3T。
31-01UYC资料
Technical Data SheetHIGH POWER LED31-01UYC Benefits. Fewer LEDs Required. Lowers Lighting System Cost. Viewing angle 50°Features . High Flux Output.. Designed for High Current Operation.. Low Thermal Resistance.. Low Profile.. Packaged in Tubes for Use with AutomaticInsertion Equipment.. Pb freeDescriptionsThis revolutionary package design allows the light designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high-current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired light appearance.Applications. Automotive Exterior Lighting. Electronic Signs and Signals. Special Lighting applicationDevice Selection GuideChipLens Color PART NO.ColorMaterial Emitted31-01UYC AlGaInP Super Yellow Water Clear31-01UYC2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads3.Tolerances unless dimensions ±0.25mmAbsolute Maximum Ratings (Ta=25℃)RatingUnits Parameter SymbolContinuous Forward Current I F 70 mAPeak Forward Current(Duty 1/10 @ 1KHZ) I FP 160 mAReverse Voltage V R 5 VOperating Temperature T opr-40 ~ +85 ℃Storage Temperature T stg-40 ~ +100 ℃Soldering Temperature(T=5 sec) T sol260 ± 5 ℃LED Junction Temperature T j 115 ℃Power Dissipation P d 220 mWElectrostatic Discharge ESD 2000 V31-01UYC Electro-Optical Characteristics (Ta=25℃)Max. Condition UnitTyp.Parameter SymbolMin.Total Flux Φv 990 1440 ---- I F=70mA mlm Viewing Angle 2θ1/2 ---- 50 ---- I F=70mA deg Peak Wavelength λp ---- 591 ---- I F=20mA nm Dominant Wavelengthλd ---- 589 ---- I F=20mA nmSpectrum Radiation△λ---- 15 ---- I F=20mA nm BandwidthForward Voltage V F---- 2.4 ---- I F=70mA V Reverse Current I R ---- ---- 10 V R=5V uARank31-01UYC □□□(1) (2) (3)(1) V F(V) (2)λd(nm) (3)Φv(mlm)Bin Min Max Bin Min Max Bin Min Max0 1.95 2.19 1 585 591 W 990 176027501 2.07 2.312 589 594 X 14402 2.19 2.43 3 592 597 Y 225041002.553 2.314 2.43 2.675 2.55 2.796 2.67 2.917 2.79 3.038 2.91 3.15*Measurement Uncertainty of Forward Voltage：±0.1V*Measurement Uncertainty of Luminous Intensity: ±15%Typical Electro-Optical Characteristics CurvesRelative Intensity vs. Wavelength Forward Current vs. Forward VoltageRelative Intensity vs. Forward Current Forward Current vs. Ambient Temp.Relative Intensity vs. Angle Dispacement Relative Intensity vs. Off Axis Angle1.40 1.802.20 2.601.20 1.602.00 2.40 2.80FORWARD VOLTAGE (V)20406080F O R W A R D C U R R E N T (m A )540560580600620640WAVELENGTH (nm)0.000.501.00R E L A T I V E I N T E N S I T Y103050700204060FORWARD CURRENT (mA)0.000.200.400.600.801.00R E L A T I V E I N T E N S I T Y20406080100AMBIENT TEMPERATURE (C)103050700204060F O R W A R D C U R R E N T (m A )1.00.80.60.40.20.00.20.40.60.8 1.080604020-20-40-60-80RELATIVE INTENSITY-90-60-300306090VIEWING ANGLE (DEGREE)0.000.501.00R E L A T I V E I N T E N S I T YLabel Form SpecificationCPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Space REF: ReferenceLOT No: Lot NumberMADE IN TAIWAN: Production PlaceNotes1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification.2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets.3. These specification sheets include materials protected under copyright of EVERLIGHTcorporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.。
2SC2383中文资料(toshiba)中文数据手册「EasyDatasheet - 矽搜」
(V)
0.1
Collector-emitter saturation voltage
CE (sat)
IC/IB = 10
V 0.05
5 0.03
0.01
5 10
30
100
300
1000
Collector current I C (mA)
VCE (sat) – IC
0.5
Common emitter 0.3 IC/IB = 10
• 产品适用于一般电子应用（如电脑,个人设备,办公设备,测量设备,工业机器人和家用电子电器）或特定的应用,明确本文中提到的使用.
产品既不打算,也没有必要使用设备或需要非常高水平的质量和/或可靠性和/或故障或失败的系统,其中可能造成的生命损失,人身伤害,重大财产损 失或严重的公众影响（ “误用”）.非预期使用包括,但不限于核设施使用的设备,在航空航天工业中使用的设备,医疗设备,用于汽车,火车,轮船 等运输,交通信号设备,用于控制发火或爆炸装置,安全装置的设备,电梯和自动扶梯,涉及到电力设备,以及设备在金融相关领域.不要使用产品的 误用,除非本文档中的特别许可.
0.005
3
10
30
100
300
Collector-emitter voltage V CE (V)
4
2009-12-21
芯片中文手册,看全文,戳
2SC2383
限制产品用途
• 东芝公司及其子公司和附属公司（统称为“TOSHIBA”）,保留对本文档的更改信息的权利,以及相关的硬件,软件和系统（统称为“产品”）,恕不另行通 知.
1 ms* 10 ms*
0.1 Collector current I
HT19-2132SURC
Temp. maintain at 125(±25)℃ 120 seconds max Temp. maintain above 183℃ 60-150 seconds Peak temperature range 235℃+5/-0℃ Time within 5°C of actual Peak Temperature (tp) 10-30 seconds Ramp-down rate +6℃/second max Ramp-up rate(217℃ to Peak) +3℃/ second max Temp. maintain at 175(±25)℃ 180 seconds max
--------
MIL-STD-750D:2031.2 J-STD-020C
IR-Reflow Pb Free Process
Temp. maintain above 217℃ 60-150 seconds Peak temperature range 260℃+0/-5℃ Time within 5°C of actual Peak Temperature (tp) 20-40 seconds Ramp-down rate +6℃/second max
T.sol= 260 ± 5℃
MIL-STD-750D:2031 JIS C 7021:A-1
Ramp-up rate(183℃ to Peak) +3℃/ second max
MIL-STD-750D:2031.2 J-STD-020C
Environmental
Test
IR-Reflow Normal Process
Parameter
PT19-21C中文资料
Technical Data Sheet0.8mm Height Flat Top PhototransistorPT19-21C/L41/TR8Features․Fast response time․High photo sensitivity․Small junction capacitance․Pb free․The product itself will remain within RoHS compliant version.Descriptions․PT19-21C/L41/TR8 is a phototransistor in miniature SMD packagewhich is molded in a water clear with flat top view lens.The device is Spectrally matched to visible and infrared emittingdiode.Applications․Miniature switch․Counters and sorter․Position sensor․Infrared applied system․EncoderDevice Selection GuideChipLens ColorLED Part No.MaterialclearPT SiliconWater2.Tolerances unless dimensions ±0.1mmAbsolute Maximum Ratings (Ta=25℃)Parameter Symbol RatingUnits Collector-Emitter Voltage V CEO 30 VEmitter-Collector-Voltage V ECO 5 VCollector Current I C 20 mA Operating Temperature T opr-25 ~ +85 ℃Storage Temperature T stg-40 ~ +85 ℃Soldering Temperature T sol 260 ℃Power Dissipation at(or below)P c 75 mW25℃Free Air TemperatureNotes: *1:Soldering time≦5 seconds.PT19-21C/L41/TR8Electro-Optical Characteristics (Ta=25℃)Parameter Symbol Condition Min Typ Max UnitRang Of Spectral Bandwidth λ0.5 --- 400 --- 1100nm Wavelength Of Peak Sensitivity λP --- --- 940 --- nm Collector-Emitter BreakdownVoltageBV CEO I C =100μA Ee=0mW/cm 2 30 --- --- V Emitter-Collector Breakdown VoltageBV ECO I E =100μA Ee=0mW/cm 2 5 --- --- V Collector-Emitter Saturation VoltageV CE(sat) I C =2mA Ee=1m W/cm 2 --- --- 0.4 V Collector Dark CurrentI CEOV CE =20V Ee=0mW/cm 2 --- --- 100 nAOn State Collector Current I C(ON) V CE =5V Ee=1mW /cm 20.3 0.6 mARise Time t r --- 15 --- Fall Timet f V CE =5VI C =1mA R L =1000Ω--- 15 --- μSPT19-21C/L41/TR8 Precautions For Use1. Over-current-proofCustomer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ).2. Storage2.1 Do not open moisture proof bag before the products are ready to use.2.2 Before opening the package, the LEDs should be kept at 30℃or less and 90%RH or less.2.3 The LEDs should be used within a year.2.4 After opening the package, the LEDs should be kept at 30℃or less and 70%RH or less.2.5 The LEDs should be used within 168 hours (7 days) after opening the package.2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded thestorage time, baking treatment should be performed using the following conditions.Baking treatment : 60±5℃for 24 hours.3. Soldering Condition3.1 Pb-free solder temperature profile3.2 Reflow soldering should not be done more than two times.3.3 When soldering, do not put stress on the LEDs during heating.3.4 After soldering, do not warp the circuit board.PT19-21C/L41/TR84.Soldering IronEach terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.5.RepairingRepair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmedPT19-21C/L41/TR8 Reliability Test Item And ConditionThe reliability of products shall be satisfied with items listed below.Confidence level：90%PT19-21C/L41/TR8 Package DimensionsPT19-21C/L41/TR8 Packing Quantity Specification1.3000Pcs/1Volume，1Volume/1Bag1. Above specification may be changed without notice. EVERLIGHT will reserve authority onmaterial change for above specification.2. When using this product, please observe the absolute maximum ratings and the instructionsfor using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolutemaximum ratings and the instructions included in these specification sheets.3. These specification sheets include materials protected under copyright of EVERLIGHTcorporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.。
(ERPMRP管理)鞋业原材料ERP系统实施指导手册V
3.原材料基本资料维护 ..........................................................................19
3.1 基础设置 ................................................................................19 3.1.1 计量单位 ............................................................................19 3.1.2 纹理的建立和使用 ....................................................................23 3.1.3 供应商类型 ..........................................................................26 3.1.4 采购类型 ............................................................................30 3.1.5 原材料颜色基础表 ....................................................................30 3.1.6 仓库管理 ............................................................................34
4.原材料采购日常业务的处理 ....................................................................47
19-213SYGC中文资料
元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet 0603 Package Chip LED (0.6 mm Height)19-213SYGC/S530-XX/TR8Features․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS complaint Version.Descriptions․The 19-213 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.Applications․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use.Device Selection GuidePart No. 19-213SYGC/S530-XX/TR8 Chip Material AlGaInP Emitted Color Brilliant Yellow Green Lens Color Water ClearEverlight Electronics Co., Ltd. Device No:SZDSE-193-026 Prepared date:18-Aug-2005Rev.1Page: 1 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213SYGC/S530-XX/TR8Package Outline Dimensions-+Note: The tolerances unless mentioned is ±0.1mm ,Unit = mmEverlight Electronics Co., Ltd. Device No:SZDSE-193-026 Prepared date:18-Aug-2005Rev.1Page: 2 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213SYGC/S530-XX/TR8Absolute Maximum Ratings (Ta=25℃)Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Soldering Temperature Symbol VR IF Topr Tstg ESD Pd IFP Rating 5 25 -40 ~ +85 -40~ +90 2000 60 60 Unit V mA ℃ ℃ V mW mATsolReflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.Electro-Optical Characteristics (Ta=25℃)Parameter Symbol *Chip Rank Min. Typ. Max. Unit ConditionLuminous IntensityIvE1 E2 E3 E4 -------------------------10 16 21 28 ----------------1.7 -----16 21 28 33 120 575 573 20 2.0 -------------------------------------2.4 10mcdViewing Angle Peak WavelengthDominant Wavelength2θ1/2 λp λd △λ VF IRdeg nm nm nm V μAIF=20 mASpectrum Radiation Bandwidth Forward VoltageReverse CurrentVR=5V*19-213SYGC/S530-XX/TR8 Chip RankEverlight Electronics Co., Ltd. Device No:SZDSE-193-026 Prepared date:18-Aug-2005 Rev.1 Page: 3 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213SYGC/S530-XX/TR8Typical Electro-Optical Characteristics CurvesEverlight Electronics Co., Ltd. Device No:SZDSE-193-026 Prepared date:18-Aug-2005Rev.1Page: 4 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213SYGC/S530-XX/TR8Label explanationCAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rankxxxxxx xxxxxxRoHSxxxxxxxxxxxx xxxx xxxxxxxxReel DimensionsNote: The tolerances unless mentioned is ±0.1mm ,Unit = mmEverlight Electronics Co., Ltd. Device No:SZDSE-193-026 Prepared date:18-Aug-2005Rev.1Page: 5 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213SYGC/S530-XX/TR8Carrier Tape Dimensions: Loaded quantity 3000 PCS per reelNote: The tolerances unless mentioned is ±0.1mm ,Unit = mmMoisture Resistant PackagingLabelAluminum moisture-proof bagDesiccantLabelEverlight Electronics Co., Ltd. Device No:SZDSE-193-026 Prepared date:18-Aug-2005Rev.1Page: 6 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213SYGC/S530-XX/TR8Reliability Test Items And ConditionsThe reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%No. 1Items Reflow SolderingTest Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RHTest Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.Ac/Re 0/12Temperature Cycle22 PCS.0/13Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.22 PCS.0/14 5 6 722 PCS. 22 PCS. 22 PCS. 22 PCS.0/1 0/1 0/1 0/1Everlight Electronics Co., Ltd. Device No:SZDSE-193-026 Prepared date:18-Aug-2005Rev.1Page: 7 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213SYGC/S530-XX/TR8Precautions For Use1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 60% RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.Everlight Electronics Co., Ltd. Device No:SZDSE-193-026 Prepared date:18-Aug-2005Rev.1Page: 8 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213SYGC/S530-XX/TR84.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.CTel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 Everlight Electronics Co., Ltd. Device No:SZDSE-193-026 Prepared date:18-Aug-2005Rev.1Page: 9 of 9Prepared by:Wang Zhiyong。
Spray Nine 玻璃和晶莹清洁剂 19 oz 安全数据表说明书
SAFETY DATA SHEET Revision Date 17-Jun-2019 Version 61. IDENTIFICATIONProduct identifierProduct Name Spray Nine Glass & Chrome Cleaner 19 oz.Other means of identificationProduct Code 23319Recommended use of the chemical and restrictions on useRecommended Use Glass cleaner - AerosolUses advised against No information availableDetails of the supplier of the safety data sheet24-hour emergency phone numberChem-Tel: 800-255-3924International Emergency:00+1+ 813-248-0585Contract Number: MIS0003453E-mail address:2. HAZARDS IDENTIFICATIONClassificationOSHA Regulatory StatusThis chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)Label elementsEmergency OverviewManufacturer AddressITW Permatex6875 Parkland Blvd.Solon, Ohio 44139 USATelephone: 1-87-Permatex(866) 732-9502May Also Be Distributed by:ITW Permatex Canada101-2360 Bristol CircleOakville, ON Canada L6H 6M5Telephone: (800) 924-6994Gases under pressure Liquefied gasSignal wordWarningContains gas under pressure; may explode if heatedAppearance White Physical state Liquid Odor Citrus Precautionary Statements - ResponseIF exposed or concerned: Get medical advice/attentionPrecautionary Statements - StorageProtect from sunlight. Store in a well-ventilated placePrecautionary Statements - DisposalDispose of contents/container to an approved waste disposal plantHazards not otherwise classified (HNOC)Not applicableOther InformationThe classification as a carcinogen or mutagen need not apply since it can be shown that the substance contains less than 0.1 %w/w 1,3-butadiene (EINECS No. 203-450-8)3. COMPOSITION/INFORMATION ON INGREDIENTSChemical Name CAS No Weight-% PROPANE 74-98-6 1 - 5BUTANE 106-97-8 1 - 54. FIRST AID MEASURESDescription of first aid measuresGeneral advice Get medical advice/attention if you feel unwell.Eye contact IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, ifpresent and easy to do. Continue rinsing. If eye irritation persists: Get medicaladvice/attention.Skin contact IF ON SKIN:. Wash skin with soap and water. If skin irritation persists, call a physician.Take off contaminated clothing and wash before reuse.Inhalation IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable forbreathing. If symptoms persist, call a physician.Ingestion IF SWALLOWED:. Do NOT induce vomiting. Never give anything by mouth to anunconscious person. Call a physician.Self-protection of the first aider Use personal protective equipment as required.Most important symptoms and effects, both acute and delayedSymptoms See section 2 for more information.Indication of any immediate medical attention and special treatment neededNote to physicians Treat symptomatically.5. FIRE-FIGHTING MEASURESSuitable extinguishing mediaCarbon dioxide (CO2), Dry chemical, FoamUnsuitable extinguishing mediaNoneSpecific hazards arising from the chemicalHeating causes rise in pressure with risk of bursting. Keep product and empty container away from heat and sources of ignition. Risk of ignition.Explosion dataSensitivity to Mechanical Impact None.Sensitivity to Static Discharge None.Protective equipment and precautions for firefightersAs in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.6. ACCIDENTAL RELEASE MEASURESPersonal precautions, protective equipment and emergency proceduresPersonal precautions Remove all sources of ignition. Do not puncture or incinerate cans. Avoid contact with skin,eyes or clothing. Wash thoroughly after handling.Environmental precautionsEnvironmental precautions See Section 12 for additional Ecological Information.Methods and material for containment and cleaning upMethods for containment Prevent further leakage or spillage if safe to do so.Methods for cleaning up Eliminate all ignition sources if safe to do so. Soak up with inert absorbent material. Sweepup and shovel into suitable containers for disposal.Prevention of secondary hazards Clean contaminated objects and areas thoroughly observing environmental regulations.7. HANDLING AND STORAGEPrecautions for safe handlingAdvice on safe handling Handle in accordance with good industrial hygiene and safety practice. Wash thoroughlyafter handling. Contents under pressure. Do not puncture or incinerate cans.Conditions for safe storage, including any incompatibilitiesStorage Conditions Protect from sunlight. Store in a well-ventilated place. Keep from freezing.Incompatible materials Strong oxidizing agents, Acids8. EXPOSURE CONTROLS/PERSONAL PROTECTIONControl parametersExposure Guidelines .Chemical Name ACGIH TLV OSHA PEL NIOSH IDLHPROPANE 74-98-6: See Appendix F: MinimalOxygen Content, explosion hazardTWA: 1000 ppmTWA: 1800 mg/m3(vacated) TWA: 1000 ppm(vacated) TWA: 1800 mg/m3IDLH: 2100 ppmTWA: 1000 ppmTWA: 1800 mg/m3BUTANE STEL: 1000 ppm explosion (vacated) TWA: 800 ppm IDLH: 1600 ppm106-97-8 hazard (vacated) TWA: 1900 mg/m3TWA: 800 ppmTWA: 1900 mg/m3NIOSH IDLH Immediately Dangerous to Life or HealthOther Information Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962(11th Cir., 1992).Appropriate engineering controlsEngineering Controls ShowersEyewash stationsVentilation systemsIndividual protection measures, such as personal protective equipmentEye/face protection Tight sealing safety goggles.Skin and body protection Wear protective natural rubber, nitrile rubber, Neoprene™ or PVC gloves.Respiratory protection None under normal use conditions. In case of insufficient ventilation, wear suitablerespiratory equipment.General Hygiene Considerations When using do not eat, drink or smoke. Regular cleaning of equipment, work area andclothing is recommended.9. PHYSICAL AND CHEMICAL PROPERTIES9.1. Information on basic physical and chemical propertiesPhysical state LiquidAppearance WhiteOdor CitrusOdor threshold No information availableProperty Values Remarks • MethodpH 10.05-10.15Melting point / freezing point No information availableBoiling point / boiling range > 100 °C / > 212 °FFlash point No information available Contents under pressureEvaporation rate < 1 Butyl acetate = 1Flammability (solid, gas) No information availableFlammability Limit in AirUpper flammability limit: No information availableLower flammability limit: No information availableVapor pressure No information availableVapor density >1 Air = 1Relative density 0.995-1.005Water solubility Soluble in waterSolubility(ies) No information availablePartition coefficient No information availableAutoignition temperature No information availableDecomposition temperature No information availableKinematic viscosity No information availableDynamic viscosity No information availableExplosive properties No information availableOxidizing properties No information availableOther InformationSoftening point No information availableMolecular weight No information availableVOC Content (%) 7.5%Density No information availableBulk density No information availableNo information availableSADT (self-acceleratingdecomposition temperature)10. STABILITY AND REACTIVITYReactivityNo information availableChemical stabilityStable under normal conditionsPossibility of Hazardous ReactionsNone under normal processing.Conditions to avoidHeat, flames and sparks. Keep from freezing.Incompatible materialsStrong oxidizing agents, AcidsHazardous Decomposition ProductsCarbon oxides11. TOXICOLOGICAL INFORMATIONInformation on likely routes of exposureInhalation May cause irritation of respiratory tract.Eye contact Contact with eyes may cause irritation. May cause redness and tearing of the eyes.Skin contact May cause skin irritation and/or dermatitis.Ingestion Ingestion may cause irritation to mucous membranes.Chemical Name Oral LD50 Dermal LD50 Inhalation LC50- - > 800000 ppm ( Rat ) 15 min PROPANE74-98-6BUTANE- - = 658 g/m3( Rat ) 4 h 106-97-8Information on toxicological effectsSymptoms No information available.Delayed and immediate effects as well as chronic effects from short and long-term exposureSensitization No information available.Germ cell mutagenicity No information available.Carcinogenicity No information available.ACGIH (American Conference of Governmental Industrial Hygienists)A3 - Animal CarcinogenIARC (International Agency for Research on Cancer)Not classifiable as a human carcinogenChronic toxicity May cause adverse effects on the bone marrow and blood-forming system. May causeadverse liver effects.Target Organ Effects Blood, Central nervous system, Eyes, Hematopoietic System, kidney, Liver, Respiratorysystem, Skin.The following values are calculated based on chapter 3.1 of the GHS document .ATEmix (oral) 15667 mg/kgATEmix (dermal) 36667 mg/kgATEmix (inhalation-gas) 3244873 mg/lATEmix (inhalation-dust/mist) 50 mg/lATEmix (inhalation-vapor) 15000 mg/l12. ECOLOGICAL INFORMATIONEcotoxicity0 % of the mixture consists of component(s) of unknown hazards to the aquatic environmentPersistence and degradabilityNo information available.BioaccumulationNo information available.MobilityNo information available.Chemical Name Partition coefficientPROPANE2.374-98-62.89BUTANE106-97-8Other adverse effectsNo information available13. DISPOSAL CONSIDERATIONSWaste treatment methodsDisposal of wastes Disposal should be in accordance with applicable regional, national and local laws andregulations.Contaminated packaging Do not reuse container.US EPA Waste Number Not applicableThis product contains one or more substances that are listed with the State of California as a hazardous waste.14. TRANSPORT INFORMATIONDOTUN/ID No 1950Proper shipping name: Aerosols, Limited Quantity (LQ)Hazard Class 2.2126Emergency Response GuideNumberIATAUN/ID No ID 8000Proper shipping name: Consumer commodityHazard Class 9ERG Code 9LIMDGUN/ID No 1950Proper shipping name: Aerosols, Limited Quantity (LQ)Hazard Class 2.2EmS-No F-D, S-U15. REGULATORY INFORMATIONInternational InventoriesTSCA CompliesDSL/NDSL CompliesEINECS/ELINCS CompliesENCS Not determinedIECSC CompliesKECL CompliesPICCS CompliesAICS Not determinedLegend:TSCA - United States Toxic Substances Control Act Section 8(b) InventoryDSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances ListEINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of Notified Chemical SubstancesENCS - Japan Existing and New Chemical SubstancesIECSC - China Inventory of Existing Chemical SubstancesKECL - Korean Existing and Evaluated Chemical SubstancesPICCS - Philippines Inventory of Chemicals and Chemical SubstancesAICS - Australian Inventory of Chemical SubstancesUS Federal RegulationsSARA 313Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains a chemical or chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372 Chemical Name SARA 313 - Threshold Values %2-BUTOXYETHANOL - 111-76-2 1.0SARA 311/312 Hazard CategoriesAcute health hazard YesChronic Health Hazard NoFire hazard YesSudden release of pressure hazard NoReactive Hazard NoCWA (Clean Water Act)This product contains the following substances which are regulated pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42)CERCLAThis material, as supplied, contains one or more substances regulated as a hazardous substance under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302)US State RegulationsCalifornia Proposition 65This product is not known to contain any chemicals listed as carcinogens or reproductive toxins.U.S. State Right-to-Know RegulationsChemical Name New Jersey Massachusetts Pennsylvania- - X WATER7732-18-5X X X PROPANE74-98-6BUTANEX X X 106-97-8X X X 2-BUTOXYETHANOL111-76-2AMMONIA SOLUTION1336-21-6XXXU.S. EPA Label InformationEPA Pesticide Registration Number Not applicable WHMIS Hazard Class A Compressed gases16. OTHER INFORMATION, INCLUDING DATE OF PREPARATION OF THE LAST REVISIONNFPA (National Fire Protection Association) HMIS (Hazardous Material Information System)Revision Date 17-Jun-2019DisclaimerThe information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The informationrelates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.End of Safety Data SheetNFPA Health hazards 1 Flammability 1 Instability 0-HMISHealth hazards 1Flammability 1Physical hazards 0Personal protection B。
CN-IEC62196-3(全)中文版
目录前言 (3)介绍 (5)1 范围 (6)2 参考标准 (6)3 条款及定义 (7)4 大体信息 (7)5 额定功率 (7)6 电力供应和电动汽车间的连接 (7)7 零件分类 (9)8 标记 (10)9 尺寸 (10)10 触电防护 (10)11 防护接地导线的尺寸及颜色 (10)12 接地条款 (10)13 端子 (11)14 互锁 (11)15 橡胶及热塑材料的老化耐性 (11)16 一般结构要求 (11)17 插座 (11)18 插头及汽车连接器结构 (12)19 汽车插孔结构 (12)20 防护等级 (12)21 绝缘耐性及电介质强度 (12)22 分断容量 (12)23 常规操作 (12)24 温度上升 (12)25 软电缆及其连接 (13)26 机械强度 (13)27 螺丝、载流部件及连接 (14)28 爬电距离，间隙及距离 (14)29 耐热性、阻燃性、耐电磨性 (14)30 腐蚀及防锈 (14)31 附带条件的短路电流承受测试 (14)32 电磁适应性 (14)33 汽车反复碾压 (14)201 元件 (14)202 电阻编码 (14)标准图纸 (15)表301 ——汽车匹配零件兼容性 (9)表302 ——接口概述 (10)国际电工协会——插头、插座、汽车连接器及汽车插孔——电动汽车传导充电第3部分：用于d.c.及a.c./d.c.引脚及导电管汽车耦合器的尺寸兼容性及互换性要求前言1) 国际电工协会（IEC）是包含所有国家电工委员会（IEC 国家委员会）的一个规范化的世界性组织。
国际电工协会的目标是促进在所有涉及电气及电子领域标准化的通力协作。
为此且除其他活动外，国际电工协会发布国际标准、技术规范、技术报告、公开规范（PAS）以及导引（下文以“国际电工协会版物”代称）。
已委托技术委员会来做准备。
在处理面对项目时的任何国际电工协会可能会参与到准备工作中来。
与国际电工协会保持联络并参与准备的国际、政府及非政府组织。
标准型号链条参数
DIN ISO链号Fra bibliotekANSI 链号
节距 P
滚子 内节内 销轴
直径
宽
直径
销轴长度
内链 板高
度
链板 厚度
极限 拉伸 载荷
每米长 重
d1
d2
h2
T
b1 min
L min Lc max
Q min
q≈
max
max
max max
mm inch mm mm mm mm mm mm mm kN kg/m
66.70
76.70 1.50
LL1222
2×2
10.70
28.90
33.20 0.70
LL1244 19.05
4×4
16.13
1.90
5.72
18.50
57.80 66.40 1.30
LL1266
6×6
26.30
86.70 99.70 2.00
LL1622
2×2
17.20
58.00 66.70 1.50
4×4
15.60
2.44
5.94
AL666
6×6
AL822
2×2
AL844 25.40
4×4
20.50
3.26
7.92
AL866
6×6
AL1022
2×2
AL1044 31.75
4×4
25.60
4.00
9.53
AL1066
6×6
AL1222
2×2
AL1244 38.10
4×4
30.50
4.80
拉文2323 YSEO 红酒葡萄酒酵母技术数据表说明书
Technical Data Sheet Pure FermentationLALVIN® 2323 YSEOSaccharomyces CerevisiaeLALVIN 2323 YSEO yeast is a specially selected dry active yeast, which is particularly beneficial for the fermentation of red wine must and red wine mash. The special advantages are color extraction, production of aroma that reminds of figs and dats.A rapid main fermentation and high-end fermentation rate are further advantages of the yeast strain.The YSEO production process helps to reduce the production of sulfur compounds especially during the fermentation of extreme different grape qualities.LALVIN 2323 YSEO yeast is particularly suitablefor voluminous red wines with southern French style (Cabernet Sauvignon, Cabernet Franc, Pinot Noir).The specific advantages of LALVIN 2323 YSEO yeast: -High nutrient requirements-Good temperature and alcohol tolerance-Quickly displaces wild yeasts and bacteria thanks to "killer characteristics"-Rapid start of fermentation and main fermentation -Low formation of undesirable fermentation by-productsApplicationAs a basic rule, musts should be inoculated with LALVIN 2323 YSEO yeast as early as possible. Longer maceration time favors uncontrolled multiplication of wild yeasts and undesirable bacteria. Fermentation problems are reliably prevented with the dosage indicated in the table.The quantities stated are guide values. They should be adapted to the individual requirements depending on the health of the grapes, the temperature, and the batch size etc. For large batches, adequate cooling must be ensured.LALVIN 2323 YSEO yeast is best stirred into a10:1 must/water mixture at 95 – 104 °F (35 – 40 °C), stirred again after approximately 20 minutes and added to the must.Application Quantity requiredlb/1,000 gal (g/hl) undernormal difficultfermentation conditions Red wine mash 1.6 – 2.5(20 – 30)2.5 –3.3(30 – 40) Red wine must 1.6 – 2.1(20 – 25)2.5 – 2.9(30 – 35) The optimum fermentation temperature is between 71.6 – 82.4 °F (22 – 28 °C). The minimum starting temperature is 64.4 °F (18 °C). LALVIN 2323 YSEO yeast should only be added to heated must or mash after recooling or rather cooling to 68 °F (20 °C).The addition of 0.005 lb SIHA® Vitamin B1 yeast nutrient per 1,000 gal of must (600 mg per 1,000 l) creates even better multiplication, fermentation and metabolism conditions. For final fermentation of stuck wines, we recommend adding an additional dose of 2.5 lb /1,000 gal (30 g/hl) SIHA PROFERM™ Plus combined yeast nutrient.Under these conditions it is beneficial to accustom the yeast to the fermentation conditions. This is best achieved by adding the quantity of yeast required for the total quantity of wine to approximately 10% of the total product to be fermented and fermenting until approximately half the sugar present is used up. This mixture is then added to the remaining 90% of the wine for final fermentation. Yeasts adapted in this way usually start fermenting more quickly and have a lower tendency to die off than if they are added directly to the total quantity.Product CharacteristicsSelection over several years enabled us to reduce the color adsorption of the yeast and therefore to achieve better color yield. This very positive yeast quality is continuously reinforced and secured through further selection. Due to increased polysaccharide formation, wines fermented with LALVIN 2323 YSEO yeast are particularly harmonious and aromatic with high "mouthfeel".LALVIN 2323 YSEO yeast shows an advantageous fermentation curve with high final degree of fermentation. Wild yeasts and undesirable bacteria are suppressed. LALVIN 2323 YSEO yeast generates no undesirable fermentation by-products such as SO2,H2S, acetaldehyde, pyruvate, α-ketoglutaric acid, volatile acid, or ester.LALVIN 2323 YSEO yeast can produce up to 15% alcohol by volume. The practical alcohol yield is approximately 47% of the sugar content. For each lb (kg) of sugar fermented, approx. 247 kJ(546 kJ)/59 kcal (130 kcal) of heat is released.SafetyNo safety information has to be provided forLALVIN 2323 YSEO yeast, since the product is used directly for food production. There are no known risks to humans or the environment during storage, handling and transport of the product.StorageLALVIN 2323 YSEO yeast is packed in airtight multi-layer aluminum film in an inert gas atmosphere. The integrity of the vacuum pack is easy to monitor.In undamaged packaging, LALVIN 2323 YSEO yeast can be stored for four years at 39 to 50 °F (4 – 10 °C). Short-term storage at 68 °F (20 °C) is acceptable. Once a package has been opened, it should be used up as soon as possible. Delivery InformationLALVIN 2323 YSEO yeast is sold under article no. 93.324 and is available in the following package sizes: 1.1 lb (500 g) aluminum sandwich foilblock pack20 x 1.1 lb (500 g) aluminum sandwich foilblock pack in cartonCertified QualityDuring the production process, LALVIN 2323 YSEO yeast is continuously monitored to ensure consistently high quality.These inspections cover technical function criteria as well as conformance with the relevant laws governing the production and sale of foodstuffs. Strict controls are carried out immediately before as well as during final packaging.LALVIN 2323 YSEO yeast conforms to the purity regulations of the International OIV Code for wine treatment products and to the regulations of the German Wine Ordinance. Please pay attention to the national laws.LALVIN® is a registered trademark of Lallemand Inc.North America44 Apple StreetTinton Falls, NJ 07724Toll Free: 800 656-3344(North America only)Tel: +1 732 212-4700Europe/Africa/Middle EastAuf der Heide 253947 Nettersheim, Germany Tel: +49 2486 809-0Friedensstraße 4168804 Altlußheim, Germany Tel: +49 6205 2094-0An den Nahewiesen 2455450 Langenlonsheim, Germany Tel: +49 6704 204-0 ChinaNo. 3, Lane 280,Linhong RoadChangning District, 200335Shanghai, P.R. ChinaTel: +86 21 5200-0099Singapore4 Loyang Lane #04-01/02Singapore 508914Tel: +65 6825-1668BrazilRua Clark, 2061 - Macuco13279-400 - Valinhos, BrazilTel: +55 11 3616-8400For more information, pleaseemail us at ********************or visit /filtration© 2016 Eaton. All rights reserved. All trademarks andregistered trademarks are the property of their respectiveowners. All information and recommendations appearing inthis brochure concerning the use of products describedherein are based on tests believed to be reliable. However,it is the user’s responsibility to determine the suitability forhis own use of such products. Since the actual use byothers is beyond our control, no guarantee, expressed orimplied, is made by Eaton as to the effects of such use orthe results to be obtained. Eaton assumes no liabilityarising out of the use by others of such products. Nor is theinformation herein to be construed as absolutely complete,since additional information may be necessary or desirablewhen particular or exceptional conditions or circumstancesexist or because of applicable laws or governmentregulations.EN1 B 2.2.4412-2016。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.Technical Data Sheet 0603 Package Chip LED (0.6 mm Height)19-213UYC/S530-XX/TR8Features․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS complaint Version.Descriptions․The 19-213 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.Applications․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use.Device Selection GuidePart No. 19-213UYC/S530-XX/TR8Chip Material AlGaInP Emitted Color Brilliant YellowLens Color Water ClearEverlight Electronics Co., Ltd. Device No:SZDSE-193-027 Prepared date:18-Aug-2005Rev.1Page: 1 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213UYC/S530-XX/TR8Package Outline Dimensions-+Note: The tolerances unless mentioned is ±0.1mm ,Unit = mmEverlight Electronics Co., Ltd. Device No:SZDSE-193-027 Prepared date:18-Aug-2005Rev.1Page: 2 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213UYC/S530-XX/TR8Absolute Maximum Ratings (Ta=25℃)Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Soldering Temperature Symbol VR IF Topr Tstg ESD Pd IFP Rating 5 25 -40 ~ +85 -40~ +90 2000 60 60 Unit V mA ℃ ℃ V mW mATsolReflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.Electro-Optical Characteristics (Ta=25℃)Parameter Symbol *Chip Rank Min. Typ. Max. Unit ConditionLuminous IntensityIvA2 A3 A4 A5 A6 -------------------------16 36 52 62 78 ----------------1.7 -----39 57 78 98 114 120 591 589 15 2.0 -----------------------------------------2.4 10mcdViewing Angle Peak WavelengthDominant Wavelength2θ1/2 λp λd △λ VF IRdeg nm nm nm V μAIF=20mASpectrum Radiation Bandwidth Forward VoltageReverse CurrentVR=5V*19-213UYC/S530-XX/TR8 Chip RankEverlight Electronics Co., Ltd. Device No:SZDSE-193-027 Prepared date:18-Aug-2005 Rev.1 Page: 3 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213UYC/S530-XX/TR8Typical Electro-Optical Characteristics CurvesEverlight Electronics Co., Ltd. Device No:SZDSE-193-027 Prepared date:18-Aug-2005Rev.1Page: 4 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213UYC/S530-XX/TR8Label explanationCAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rankxxxxxx xxxxxxRoHSxxxxxxxxxxxx xxxx xxxxxxxxReel DimensionsNote: The tolerances unless mentioned is ±0.1mm ,Unit = mmEverlight Electronics Co., Ltd. Device No:SZDSE-193-027 Prepared date:18-Aug-2005Rev.1Page: 5 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213UYC/S530-XX/TR8Carrier Tape Dimensions: Loaded quantity 3000 PCS per reelNote: The tolerances unless mentioned is ±0.1mm ,Unit = mmMoisture Resistant PackagingLabelAluminum moisture-proof bagDesiccantLabelEverlight Electronics Co., Ltd. Device No:SZDSE-193-027 Prepared date:18-Aug-2005Rev.1Page: 6 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213UYC/S530-XX/TR8Reliability Test Items And ConditionsThe reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%No. 1Items Reflow SolderingTest Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RHTest Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.Ac/Re 0/12Temperature Cycle22 PCS.0/13Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.22 PCS.0/14 5 6 722 PCS. 22 PCS. 22 PCS. 22 PCS.0/1 0/1 0/1 0/1Everlight Electronics Co., Ltd. Device No:SZDSE-193-027 Prepared date:18-Aug-2005Rev.1Page: 7 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213UYC/S530-XX/TR8Precautions For Use1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 60%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.Everlight Electronics Co., Ltd. Device No:SZDSE-193-027 Prepared date:18-Aug-2005Rev.1Page: 8 of 9Prepared by:Wang Zhiyong元器件交易网EVERLIGHT ELECTRONICS CO.,LTD.19-213UYC/S530-XX/TR84.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.CTel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 Everlight Electronics Co., Ltd. Device No:SZDSE-193-027 Prepared date:18-Aug-2005Rev.1Page: 9 of 9Prepared by:Wang Zhiyong。