BAXXBC0WT-V5中文资料
Phoenix Contact MSTB 2,5 4-ST-5,08 4位插座说明书
06/08/2016 Page 1 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (/download)Plug component, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm,Connection method: Screw connection with tension sleeve, Color: green, Contact surface: TinThe figure shows a 10-position version of the productWhy buy this product■Plug-in direction parallel to the conductor axis ■Individual position coding by inserting coding profilesKey Commercial DataTechnical dataDimensionsGeneralPrinted-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035 Technical dataGeneralConnection data06/08/2016 Page 2 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035 Technical dataConnection dataStandards and RegulationsClassificationseCl@ssETIMUNSPSCApprovalsApprovalsApprovalsCSA / VDE Gutachten mit Fertigungsüberwachung / IECEE CB Scheme / EAC / cULus Recognized / EACEx Approvals06/08/2016 Page 3 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035 ApprovalsApprovals submittedApproval detailsIECEE CB SchemeEACEACAccessoriesAccessoriesBridge06/08/2016 Page 4 / 1306/08/2016 Page 5 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035AccessoriesInsertion bridge - EBP 2- 5 - 1733169Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 2Insertion bridge - EBP 3- 5 - 1733172Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 3Insertion bridge - EBP 4- 5 - 1733185Insertion bridge, fully insulated, for connectors with 5.0 or 5.08 mm pitch, no. of positions: 4Cable housingCable housing - KGG-MSTB 2,5/ 4 - 1803882Cable housing, Pitch: 0 mm, Number of positions: 4, Dimension a: 20 mm, Color: greenCoding elementCoding profile - CP-MSTB - 1734634Coding profile, is inserted into the slot on the plug or inverted header, red insulating materialLabeled terminal marker06/08/2016 Page 6 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035AccessoriesMarker card - SK 5,08/3,8:FORTL.ZAHLEN - 0804293Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting type: Adhesive, for terminal block width: 5.08 mm, Lettering field: 5.08 x 3.8 mmMarker penMarker pen - B-STIFT - 1051993Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mmScrewdriver toolsScrewdriver - SZS 0,6X3,5 - 1205053Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100mm, 2-component grip, with non-slip gripTerminal markingMarker card - SK U/2,8 WH:UNBEDRUCKT - 0803883Marker card, Sheet, white, unlabeled, can be labeled with: Plotter, Office printing systems, Mounting type: Adhesive,Lettering field: 186 x 2.8 mmAdditional productsBase strip - MSTBW 2,5/ 4-G-5,08 - 1735866Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering06/08/2016 Page 7 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035AccessoriesBase strip - MDSTB 2,5/ 4-G1-5,08 - 1736713Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering, In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!Base strip - MDSTBV 2,5/ 4-G1-5,08 - 1736755Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering, In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!Base strip - MSTBVA 2,5/ 4-G-5,08 - 1755752Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave solderingBase strip - MSTBA 2,5/ 4-G-5,08 - 1757268Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave solderingBase strip - MSTBV 2,5/ 4-G-5,08 - 1758034Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering06/08/2016 Page 8 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035AccessoriesBase strip - MSTB 2,5/ 4-G-5,08 - 1759033Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave solderingBase strip - SMSTBA 2,5/ 4-G-5,08 - 1767397Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave solderingBase strip - SMSTB 2,5/ 4-G-5,08 - 1769489Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave solderingBase strip - MSTBA 2,5/ 4-G-5,08-LA - 1770960Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave solderingBase strip - MDSTBA 2,5/ 4-G-5,08 - 1842089Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions!In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!06/08/2016 Page 9 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035AccessoriesHousing - MDSTBW 2,5/ 4-G-5,08 - 1842238Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions!In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!Base strip - MDSTB 2,5/ 4-G-5,08 - 1842539Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering, Can be aligned! Mounting flange: Order No. 1736771, 1736768.In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!Base strip - MDSTBVA 2,5/ 4-G-5,08 - 1845358Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering, The article can be aligned to create different nos. of positions!In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!Housing - MDSTBV 2,5/ 4-G-5,08 - 1845507Header, Nominal current: 10 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering, Can be aligned! Mounting flange: Order No. 1836477, 1836480.In combination with MVSTB or FKCV plug components, both an MVSTBW (or FKCVW) and an MVSTBR plug (or FKCVR) must be used. Combination with TMSTBP plug components is not possible!Base strip - MSTBO 2,5/ 4-GR-5,08 - 1847123Header, Nominal current: 8 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering06/08/2016 Page 10 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035AccessoriesBase strip - MSTBO 2,5/ 4-GL-5,08 - 1850453Header, Nominal current: 8 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave solderingBase strip - EMSTBVA 2,5/ 4-G-5,08 - 1859535Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Press-in technologyBase strip - EMSTBA 2,5/ 4-G-5,08 - 1880326Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Press-in technologyBase strip - DFK-MSTBA 2,5/ 4-G-5,08 - 1898855Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave solderingBase strip - DFK-MSTBVA 2,5/ 4-G-5,08 - 1899155Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: green,Contact surface: Tin, Mounting: Wave soldering06/08/2016 Page 11 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035AccessoriesPrinted-circuit board connector - MSTBA 2,5/ 4-G-5,08 THT - 1902767Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”Base strip - MSTBVA 2,5/ 4-G-5,08 THT - 1902835Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”Printed-circuit board connector - MSTBA 2,5/ 4-G-5,08 THT-R32 - 1937253Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”Base strip - MSTBVA 2,5/ 4-G-5,08 THT-R56 - 1940431Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”Printed-circuit board connector - CC 2,5/ 4-G-5,08 P26THR - 1954401Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”06/08/2016 Page 12 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035AccessoriesPrinted-circuit board connector - CC 2,5/ 4-G-5,08 P26THRR32 - 1954605Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”Printed-circuit board connector - CCA 2,5/ 4-G-5,08 P26THR - 1954935Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”Printed-circuit board connector - CCA 2,5/ 4-G-5,08 P26THRR56 - 1955057Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”Printed-circuit board connector - CCV 2,5/ 4-G-5,08 P26THR - 1955400Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”Printed-circuit board connector - CCV 2,5/ 4-G-5,08 P26THRR32 - 1955549Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”06/08/2016 Page 13 / 13Printed-circuit board connector - MSTB 2,5/ 4-ST-5,08 - 1757035AccessoriesPrinted-circuit board connector - CCVA 2,5/ 4-G-5,08 P26THR - 1955879Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”Printed-circuit board connector - CCVA 2,5/ 4-G-5,08 P26THRR56 - 1955989Header, Nominal current: 12 A, Rated voltage (III/2): 320 V, Number of positions: 4, Pitch: 5.08 mm, Color: black,Contact surface: Tin, Mounting: THR soldering, User information and design recommendations for through hole reflow technology can be found under “Downloads”DrawingsDiagramAmbient temperature [°C]C u r r e n t s t r Type: MSTB 2,5/...-ST-5,08 with CC 2,5/...-G-5,08 P26THRDiagramType: MSTB 2,5/...-ST-5,08 with CCVA 2,5/...-G-5,08 P26THRPhoenix Contact 2016 © - all rights reserved 。
BAW56-V中文资料
BAW56-VDocument Number 85549Rev. 1.7, 09-Mar-06Vishay Semiconductors1Small Signal Switching Diode, DualFeatures•Silicon Epitaxial Planar Diode•Fast switching dual diode with commonanode•This diode is also available in other con-figurations including: a single with type designa-tion BAL99, a dual anode to cathode with type designation BAV99, and a dual common cathode with type designation BAV70. •Lead (Pb)-free component•Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/ECMechanical DataCase: SOT23 Plastic case Weight: approx. 8.8 mgPackaging Codes/Options:GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 3 k per 7" reel (8 mm tape), 15 k/boxParts TableAbsolute Maximum RatingsT amb = 25°C, unless otherwise specified1) Device on fiberglass substrate, see layoutPartOrdering codeMarking Remarks BAW56-VBAW56-V-GS18 or BAW56-V-GS08JDTape and ReelParameterT est condition Symbol Value Unit Repetitive peak reverse voltage = Working peak reverse voltage = DC Blocking voltage V R = V RRM70VForward continuous current I F 250mA Non repetitive peak forward currentt p = 1 μs I FSM 2.0A t p = 1 ms I FSM 1.0A t p = 1 sI FSM 0.5A Power dissipationP tot3501)mW 2Document Number 85549Rev. 1.7, 09-Mar-06BAW56-VVishay Semiconductors Thermal CharacteristicsT amb = 25°C, unless otherwise specified1) Device on fiberglass substrate, see layoutElectrical CharacteristicsT amb = 25°C, unless otherwise specifiedTypical CharacteristicsT amb = 25°C, unless otherwise specifiedParameterTest condition Symbol Value Unit Thermal resistance junction to ambiant airR thJA 430K/W Junction temperature T j 150°C Storage temperature rangeT stg- 65 to + 150°CParameterTest conditionSymbol MinTyp.Max Unit Forward voltageI F = 1 mA V F 715mV I F = 10 mA V F 855mV I F = 50 mA V F 1000mV I F = 150 mAV F 1250mV Reverse currentV R= 70 VI R 2.5µA V R = 70 V , T j = 150°C I R 100µA V R = 25 V , T j = 150°CI R 30µA Diode capacitance V F = V R = 0, f = 1 MHz C tot 2pF Reverse recovery timeI F = 10 mA to I R = 1 mA, V R = 6 V , R L = 100 Ωt rr6nsFigure 1. Forward Current vs. Forward VoltageV F -For w ard V oltage (V )14356Figure 2. Peak forward current I FM = f (t p )BAW56-VDocument Number 85549Rev. 1.7, 09-Mar-06Vishay Semiconductors3Package Dimensions in mm (Inches) 4Document Number 85549 Rev. 1.7, 09-Mar-06BAW56-VVishay SemiconductorsOzone Depleting Substances Policy StatementIt is the policy of Vishay Semiconductor GmbH to1.Meet all present and future national and international statutory requirements.2.Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs).The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.1.Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendmentsrespectively2.Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the EnvironmentalProtection Agency (EPA) in the USA3.Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.We reserve the right to make changes to improve technical designand may do so without further notice.Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use.Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, GermanyDocument Number: 91000Revision: 18-Jul-081DisclaimerLegal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网。
Siemens MICROMASTER Vector 拉力抵制器说明书
© Siemens plc 19981G85139-H1750-U121-C12/02/98EnglishBraking Resistors for MICROMASTER VectorInstruction SheetSafety PrecautionsWARNINGEnglishG85139-H1750-U121-C 12/02/98© Siemens plc 19982Connecting Up Resistor ProtectionIt is important that the mains supply to the inverter is provided via a contactor which can disconnect the supply if the resistor overheats. Under certain conditions (e.g. due to operation outside normal tolerance) a resistor could overheat, so additional thermal protection must be installed.Protection is provided by a thermal cut-out switch (supplied with each resistor). This mounts directly onto the resistor and is wired in-series with the supply from the main contactor (see diagram).The main contactor will then de-energise to disconnect the mains power supply from the inverter. This prevents the braking resistor from drawing excessive current from the inverter.The thermal switch contacts close again when the resistor temperature falls, thus reconnecting the mains power supply to the contactor and power to the inverter.* Note:Refer to the inverter’s handbook for thelocation of the braking resistor terminals.CONTACTOR SUPPLYMAINS POWERINPUT125°C(0DC87-2RA0 = 160°C)MAXCable Requirements Thermal Switch contacts B+/DC +ve B -ve Thermal Cut-out Switch Opening temp.Closing temp.Rating at 230 V 2.5 mm 22-core (1000 V)with screen1.5 mm 22-core 125°C125°C or 160°C (0DC87-2RA0)110°C or 145°C (0DC87-2RA0)10 A 10 AConnecting to the MICROMASTER VectorThe braking resistor must be connected directly to the DC link of the MICROMASTER Vector via the inverter’s B+/DC+ and B- terminals. Connect the braking resistor into the system, as follows:(1) Remove mains power from the MICROMASTER Vector and allow at least fiveminutes for the internal capacitors to discharge.(2) Route the resistor cables through the appropriate gland. Strip back the screen ofthe resistor connector cable to approximately 135 mm from the faston connectors.(3) Connect the braking resistor to the B+/DC+ and B- terminals on theMICROMASTER Vector using the 6.3 mm faston connectors on the resistor cables and connect the cable screen to the gland or a suitable PE terminal.(4) Secure the thermal cut-out switch onto the resistor using two clips.(5) Connect the thermal cut-out switch as shown below using suitable cable.Commissioning Parameter Changes(1) Connect mains electrical power to the MICROMASTER Vector.(2) Set parameter P009 = 3.(3) Set parameter P075 = 1.(4) Set parameter P066 = 0.(5)Ensure that parameter P070 = 0.Optimising Braking ActionAdjust the ramp-down time on the MICROMASTER Vector (P003) to provide the required braking action.The ramp-down time should be kept within the braking resistor peak power dissipation.Extremely short ramp-down times or high inertia loads will cause the MICROMASTER Vector to trip and display fault code F001.Braking Resistor SelectionResistor Order No.Continuous Peak Rating Resistance Pk. volts Dimensions (mm)Weight Inverter 6SE3290-Rating (5% duty cycle)(Ω) +/- 10%DCL L1W W1W2Dkg Type0CA87-2RA040 W 800 W2002001905728-54 1.3MMV12 - MMV75MMV12/2 - MMV75/20CB87-2RA080 W 1.6 kW 1004502802715728-54 1.7MMV110 - MMV150MMV110/2 - MMV150/20CC87-2RA0200 W 4 kW 4033833080204054 3.1MMV220 - MMV300MMV220/2 - MMV400/20DA87-2RA080 W 1.6 kW 4002802705728-54 1.7MMV37/3 -MMV150/30DB87-2RA0150 W 3 kW 20090028027183234054 2.5MMV220/3 - MMV300/30DC87-2RA0400 W7.5 kW854003901032840523.8MMV400/3 - MMV750/3During braking, the inverter dissipates the braking energy of the motor and load to the externally mounted resistor. The lower the value of the external resistor the greater the braking power. The resistors are able to dissipate large amounts of energy for short periods but when used continuously, the rating is considerably less. To protect the resistor and the inverter from overload, the MICROMASTER Vector ‘chopper circuit’ (P070) limits the duty cycle (ratio of ‘time on’ to ‘time off’) to 5% (12 seconds in 4 minutes). This reduces the maximum dissipation level of the resistor.The resistor must be adequately rated to withstand the resulting power dissipation.。
W25Q64中文资料精编版
W25Q64BV出版日期:2010年7月8日- 1 - 版本E64M位与串行闪存双路和四路SPIW25Q64BV- 2 -目录1,一般DESCRIPTION (5)2。
FEATURES (5)3引脚配置SOIC208-MIL.......................................... .. (6)4,焊垫配置WSON8X6-MM.......................................... . (6)5,焊垫配置PDIP300-MIL.......................................... . (7)6引脚说明SOIC208密耳,PDIP300密耳和WSON8X6-MM................................ 7......7引脚配置SOIC300mil的.......................................... .. (8)8引脚SOIC封装说明300-MIL (8)8.1包装Types (9)8.2片选(/CS) (9)8.3串行数据输入,输出和IO(DI,DO和IO0,IO1,IO2,IO3)............................. 9.......8.4写保护(/WP) (9)8.5控股(/HOLD) (9)8.6串行时钟(CLK) (9)9座DIAGRAM (10)10功能DESCRIPTION (11)10.1 SPI OPERATIONS (11)10.1.1标准SPI Instructions (11)10.1.2双SPI Instructions (11)10.1.3四路SPI Instructions (11)10.1.4保持功能 (11)10.2写保护 (12)10.2.1写保护Features (12)11,控制和状态寄存器............................................ .. (13)11.1状态REGISTER (13)11.1.1 BUSY (13)11.1.2写使能锁存(WEL) (13)11.1.3块保护位(BP2,BP1,BP0)..................................... .. (13)11.1.4顶/底块保护(TB)....................................... .................................................. ..1311.1.5部门/块保护(SEC) (13)11.1.6状态寄存器保护(SRP,SRP0)....................................... . (14)11.1.7四路启用(QE) (14)11.1.8状态寄存器内存保护........................................... .. (16)11.2 INSTRUCTIONS (17)11.2.1制造商和设备标识........................................... .. (17)11.2.2指令集表1 (18)W25Q64BV11.2.3指令表2(阅读说明书)....................................... (19)出版日期:2010年7月8日- 3 - 修订版E11.2.4写使能(06h) (20)11.2.5写禁止(04h) (20)11.2.6读状态寄存器1(05H)和读状态寄存器2(35H).............................. (21)11.2.7写状态寄存器(01H)......................................... .................................................. .. (22)11.2.8读取数据(03h) (23)11.2.9快速阅读(0Bh) (24)11.2.10快速读双输出(3BH)........................................ .................................................. 0.25 11.2.11快速读四路输出(6BH)........................................ .. (26)11.2.12快速读双I / O (BBh) (27)11.2.13快速读取四I/ O (EBh) (29)11.2.14八进制字读取四I/ O(E3H)..................................... (31)11.2.15页编程(02h) (33)11.2.16四路输入页编程(32H)........................................ . (34)11.2.17扇区擦除(20H) (35)11.2.1832KB的块擦除(52H) (36)11.2.1964KB的块擦除(D8h) (37)20年2月11日芯片擦除(C7H/ 60h) (38)21年2月11日擦除挂起(75h) (39)22年2月11日擦除恢复(7Ah) (40)23年11月2日掉电(B9h) (41)24年2月11日高性能模式(A3H)......................................... (42)25年2月11日发布掉电或高性能模式/设备ID(ABH) (42)26年2月11日读制造商/设备ID(90H)....................................... . (44)27年2月11日阅读唯一的ID号(4BH)........................................ . (45)28年2月11日读JEDEC的ID (9Fh) (46)29年2月11日连续读取模式复位(FFH或FFFFH)...................................... .. (47)12,电气特性.............................................. (48)12.1绝对最大Ratings (48)12.2操作范围 (48)12.3上电时序和写抑制阈值......................................... (49)12.4直流电气Characteristics (50)12.5 AC测量条件.............................................. .. (51)12.6 AC电气Characteristics (52)12.7 AC电气特性(续)......................................... . (53)12.8串行输出Timing (54)12.9输入Timing (54)12.10持有Timing (54)13包装SPECIFICATION (55)W25Q64BV13.18引脚SOIC208密耳(包装代号SS)..................................... .. (55)- 4 -13.28引脚PDIP300密耳(封装代码DA)..................................... (56)13.38触点WSON8x6毫米(封装代码ZE)....................................... (57)13.416引脚SOIC300密耳(封装代码SF)..................................... . (58)14订货INFORMA TION (59)14.1有效的部件号和顶端标记.......................................... (60)15版本HISTORY (61)W25Q64BV出版日期:2010年7月8日- 5 - 修订版E1概述该W25Q64BV(64M位)串行Flash存储器提供了有限的系统存储解决方案空间,引脚和电源。
Turck BC5-S18-Y1X 电容传感器说明书
T 12:21:38+01:00Type code BC5-S18-Y1X Ident no.20060Rated switching distance (flush) 5 mm Rated switching distance (non-flush)7.5 mmAssured switching distance ð (0.72 x Sn) mm Hysteresis1…20 %Temperature drift type 20 %Repeatabilityð 2 % of full scale Ambient temperature-25…+70 °C VoltageNom. 8.2 VDC Non-actuated current consumption ð 1.2 mA Actuated current consumption ï 2.1 mA Switching frequency 0.1 kHzOutput function2-wire, NAMURApproval acc. toKEMA 02 ATEX 1090X Internal capacitance (C ) / inductance (L )150 nF / 150 µHDevice designationÉ II 2 G Ex ia IIC T6 Gb / II 1 D Ex ia IIIC T115 °C Da(max. U = 20 V, I = 20 mA, P = 200 mW)Construction threaded barrel, M18 x 1Dimensions74 mmHousing material plastic, PA12-GF30, PEI Active area materialPlastic, PA12-GF30, yellow Admissible pressure on front cap ð 6 bar Max. tightening torque housing nut 2 Nm Connection cableCable qualityØ 5.2, LifYY , PVC, 2mCable cross section 2 x 0.34 mm Vibration resistance 55 Hz (1 mm)Shock resistance 30 g (11 ms)Protection class IP67MTTF448 years acc. to SN 29500 (Ed. 99) 40 °C Switching stateLED yellow■ATEX category II 2 G, Ex zone 1■ATEX category II 1 D, Ex zone 20■SIL2 as per IEC 61508■Threaded barrel, M18 x 1■Plastic, PA12-GF30■Fine adjustment via potentiometer ■DC 2-wire, nom. 8.2 VDC■Output acc. to DIN EN 60947-5-6 (NA-MUR)■Cable connectionWiring DiagramFunctional principleCapacitive proximity switches are designed for non-contact and wear-free detection of electrically conductive as well as non-conduc-tive metal objects.T 12:21:38+01:00Mounting instructions / Description minimum distances Distance D 36 mm Distance W 15 mm Distance S 27 mm Distance G30 mm Diameter of the active area BØ 18 mmThe given minimum distances have been checked in compliance with the standard switching distance.Should the sensitivity of the sensors be changed via potentiometer, the data sheet specifications no longer apply.T 12:21:38+01:00AccessoriesType codeIdent no.DescriptionDesignBS 1869471Mounting bracket for threaded barrel devices; material: PA66-GFBSN 1869472Fixing clamp; material: PA66-GFBST-18B 6947214Fixing clamp for threaded barrel devices, with dead-stop; ma-terial: PA6MAP-M186950012Mounting adapter; material: Polypropylene; sensor replace-ment with filled container possible (adapter remains in con-tainer during sensor replacement)IM1-22EX-R 7541231Isolating switching amplifier, 2-channel; 2 relay outputs; in-put NAMUR signal; selectable ON/OFF mode for wire-break and short-circuit monitoring; adjustable output mode (NO /NC mode); removable terminal blocks; width 18 mm; univer-sal power supply unitT 12:21:38+01:00Operating manual Intended useThis device fulfills the directive 94/9/EC and is suited for use in explosion hazardous areas according to EN60079-0:2012, -11:2012, -26:2007.Further it is suited for use in safety-related systems, including SIL2 as per IEC 61508.In order to ensure correct operation to the intended purpose it is required to observe the national regulations and directives.For use in explosion hazardous areas conform to classificationII 2 G and II 1 D (Group II, Category 2 G, electrical equipment for gaseous atmospheres and category 1 D, electrical equipment for dust atmo-spheres).Marking (see device or technical data sheet)É II 2 G and Ex ia IIC T6 Gb acc. to EN60079-0 and -26 und É II 1 D Ex ia IIIC T115°C Da acc. to EN60079-0Local admissible ambient temperature -25…+70 °CInstallation / CommissioningThese devices may only be installed, connected and operated by trained and qualified staff. Qualified staff must have knowledge of protection classes, directives and regulations concerning electrical equipment designed for use in explosion hazardous areas.Please verify that the classification and the marking on the device comply with the actual application conditions.This device is only suited for connection to approved Exi circuits compliant to EN60079-0 and -11. Please observe the maximum admissible electrical values.After connection to other circuits the sensor may no longer be used in Exi installations. When interconnected to (associated) electrical equip-ment, it is required to perform the "Proof of intrinsic safety" (EN60079-14).When employed in safety systems to IEC 51408 it is required to assess the failure probability (PFD) of the complete circuitry.Installation and mounting instructionsAvoid static charging of cables and plastic devices. Please only clean the device with a damp cloth. Do not install the device in a dust flow and avoid build-up of dust deposits on the device.If the devices and the cable could be subject to mechanical damage, they must be protected accordingly. They must also be shielded against strong electro-magnetic fields.The pin configuration and the electrical specifications can be taken from the device marking or the technical data sheet.service / maintenanceRepairs are not possible. The approval expires if the device is repaired or modified by a person other than the manufacturer. The most important data from the approval are listed.。
BCU操作说明书,中文翻译版
BCU操作说明书,中文翻译版烧嘴控制单元—BCU 4##操作说明书●请阅读并保留在一个安全的地方符号的解释:●,①, ②, ③... =功能→ =说明这些操作说明里的所有工作的开始只能由被授权的专门人员来完成!注意:不正确的安装、调节、修改、操作或维护可能会造成材料的损坏。
用之前请阅读本说明书,这个单元必须按照生效的规定来安装。
内容符合标准声明、测试、安装、电缆的选择与安装、技术数据、接线、调节、鉴定、调试、高温下的操作、检查功能、手动操作、出现故障时的处理、读取火焰的信号和参数设置、附件符合标准声明我们生产商在此声明,标有产品ID号CE-0063BO1064的产品:BCU400,460,465,480,遵守以下指令的基本要求:—90/396/EEC与 EN 298相一致—98/37/EC与EN 746的相关截面相一致—73/23/EEC与相关的标准相一致—89/336/EEC与涉及到辐射的相关标准相一致现场总线的接口应按照EN 50170-2的要求,,相关产品应符合由被通告人0063所做的定型试验,综合质量的保证是由一个依据DIN EN ISO 9001的质量体系认证来担保的,DIN EN ISO 9001是按照附件2第3页的指令90/396/EEC.Elster GmbHOsnabrückCAS和FM认证加拿大标准协会类别:3335-01 和 3335-81,“系统(气体)—自动点火和部件”,FMRC:7611“燃烧保护设施和火焰感应系统”,应用程序的设计依据NFPA 85 和NFPA 86。
BCU带有完整的点火变压器,在连续的操作中用来点燃和检测燃气烧嘴,BCU 440–480的监测是由电离电极来执行的,BCU 460–480由紫外线传感器来执行。
带有UVS式UV传感器的BCU只能在断续操作状态下使用,这就意味着操作必须在24小时内间断一次。
带有UVD 1式的UV传感器的BCU只适应于BCU 460..U 和BCU 480..U,这种BCU也适用于连续的操作,连接的细节请看UVD操作说明书。
Amprobe 5XP-A数码ют参数说明书
5XP-Asuch as VolTect™ non-contact voltage (NVC) detection and our exclu-sive Magne-Grip™ holster that frees both hands for work. The 5XP-A is the right choice for residential, commercial and general trouble-shooting applications.27 ranges/10 functions■Amprobe® Test ToolsData SheetFunctionRangeAccuracySpecificationsGeneral Specifications5XP-A Digital Multimeter Voltage DC Volts Ranges200 mV, 2 V, 20 V, 200 V, 1000 V± (1.0 % rdg + 1 dgt) AC Volts (45 Hz to 500 Hz) Ranges 200 mV, 2 V, 20 V, 200 V, 750 V ± (1.5 % rdg + 5 dgts)Resolution100 μV Input Impedance 10 M WOverload Protection 200 mV: 1000 V DC or 750 V AC RMS (3 minutes) All other ranges: 1000 V DC or 750 V AC RMSCurrentDC Current Ranges200 μA, 2 mA, 20 mA, 200 mA ± (1.5 % rdg + 1 dgt)AC Current (45 Hz to 500 Hz) Ranges 200 μA, 2 mA, 20 mA, 200 mA ± (2.0 % rdg + 5 dgts) Resolution0.1 μAInput Protection 315 mA/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on mA input Burden Voltage 300 mV max. (1 V max. on 200 mA range)Resistance 200 W , 2 k W , 20 k W , 200 k W ± (1.0 % rdg + 4 dgts) 2 M W ± (1.5 % rdg + 4 dgts)20 M W ± (2.0 % rdg + 5 dgts) Resolution100 m WOpen Circuit Voltage 0.3 V DC typical, (3.0 V DC on 200 W range) Overload Protection 1000 V DC or 750 V AC RMS ContinuityAudible Indication 75 W ± 25 WResponse Time100 msOverload Protection1000 V DC or 750 V AC RMSDisplay 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999Polarity Automatic, positive implied, negative polarity indication Overrange(OL) or (-OL) is displayedLow Battery Indication The “M ” is displayed when the battery voltage drops below the operating level Measurement Rate2.5 times per second, nominal Operating Environment 0 °C to 50 °C at <70 % R.H.Storage Temperature -20 °C to 60 °C, 0 to 80 % R.H. with battery removed from meter AccuracyStated accuracy at 23 °C ± 5 °C, <75 % relative humidityTemperature Coefficient 0.1 x (specified accuracy) per °C (0 °C to 18 °C, 28 °C to 50 °C)Altitude 2000 m (6561.7 ft)PowerSingle standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22Battery Life200 hours typical with carbon-zincDimensions (H x W x D) 155 mm x 72 mm x 32 mm (6.1 in x 2.8 in x 1.3 in)Weight Approx. 210 g (7.4 oz) including battery WarrantyOne-yearData SheetFunctionRangeAccuracyDiode TestTest Current 1.0 mA (approximate) ±(1.5 % rdg + 3 dgts) Resolution 1 mV Open Circuit Voltage 3.0 V DC typical Overload Protection 1000 V DC or 750 V AC RMS 1000 V 600 V 300 V Battery Test 1.5 V, 9 V ± (3.5 % rdg + 2 dgts) Resolution 1 mV, 10 mV Loaded Current 150 mA typical for 1.5 V range, 5 mA typical for 9 V range Overload Protection 1000 V DC or 750 V AC RMS on 9 V range, on V W input 315 mA/1000 V fast blow ceramic fuse on 1.5 V range, on mA input Non-Contact Voltage IndicatorSense voltage 70 V to 600 V AC; beeper chirps and bright red LED comes on, works on all ranges5XP-A Digital Multimeter Specifications, cont.Amprobe® Test ToolsData Sheet©2007 Amprobe Test Tools. All rights reserved. 9/2007 2124133 D-US-N Rev CAmprobe® Test Tools website: email:**************** Everett, WA 98203Tel: 877-AMPROBEAmprobe® Test Tools Europe In den Engematten 1479286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0Included AccessoriesPair of test leads (TL245A), fuse 315 mA/1000 V P/N FP300, 9 V battery (installed), Magne-Grip™ Holster with magnetic hanging strap and users manual.Optional AccessoriesVC30A Carrying CaseDL243D Test Lead KitTC253B Temperature ConverterTL36ATest Lead Set with alligator clips5XP-A Digital Multimeter。
LOGO! 0BA6 中文手册
专业人员 指定的用途
பைடு நூலகம்
如果危险等级大于一,将使用表示最高危险等级的警告通知。带有警示符号的人员伤害的警告同时也包含财 产损失的警告
请按照此文档安装设置设备/系统。只有专业人员才能对装置系/ 统进行调试和操作。 本文档中安全通知情 况下定义合格人员为现行安全惯例和标准中规定的有权限对设备、系统和电路进行调试、接地和贴标签的 人员。
手册适用范围
本手册适用于 0BA6 系列的设备。
LOGO! 0BA6 设备系列的新特点
• LOGO! TD(文本显示)提供了附加的消息显示设备,包含四个光标键和四个功能键,可 以用于电路编程。
• 新的 LOGO! 电池卡和 LOGO! 存储器电池卡为实时时钟提供了长达两年的备用电池。新 的 LOGO! 存储卡和存储器电池卡提供了 32 Kb 的存储空间:四倍于 LOGO! 0BA5 存储 卡的存储空间。
2.3.6 连接 AS 接口总线 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
2.4
运行设备 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
LOGO! 手册中描述的接线信息,在与设备配套的 LOGO! 产品信息中也有同样描述。关于如何在 PC 上编程 LOGO! 的详细说明,请参见 LOGO!Soft Comfort 的在线帮助。 LOGO! Soft Comfort 是用于 PC 上的编程软件。它可以在 WindowsR(包括 Windows VistaR)、LinuxR 和 Mac OS XR 环境下运行。它可帮助您启动 LOGO!,并可以独立 于 LOGO! 编写、打印和保存程序。
BCX51 52 53 PNP中间功率导电器SOT89数据手册说明书
Features• BV CEO > -45V, -60V & -80V• I C = -1A Continuous Collector Current • I CM = -2A Peak Pulse Current• Low Saturation Voltage V CE(sat) <************• Gain Groups 10 and 16• Complementary NPN Types: BCX54, 55, and 56• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) • Halogen- and Antimony-Free. "Green" Device (Note 3)•For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAPcapable, and manufactured in IATF 16949 certified facilities),please contact us or your local Diodes representative.https:///quality/product-definitions/Mechanical Data• Case: SOT89• Case Material: Molded Plastic, “Green” Molding Compound; UL Flammability Rating 94V-0• Moisture Sensitivity: Level 1 per J-STD-020•Terminals: Matte Tin Finish Leads; Solderable per MIL-STD-202 Method 208•Weight: 0.052 grams (Approximate)Applications • Medium Power Switching or Amplification Applications • AF Driver and Output StagesOrdering Information (Note 4)Product Compliance Marking Reel Size (inches)Tape Width (mm)Quantity per ReelBCX51TA Standard AA 7 12 1,000 BCX51-13R Standard AA 13 12 4,000 BCX5110TA Standard AC 7 12 1,000 BCX5116TA Standard AD 7 12 1,000 BCX5116TC Standard AD 13 12 4,000 BCX52TA Standard AE 7 12 1,000 BCX5210TA Standard AG 7 12 1,000 BCX5216TA Standard AM 7 12 1,000 BCX53TA Standard AH 7 12 1,000 BCX5310TA Standard AK 7 12 1,000 BCX5316TA Standard AL 7 12 1,000 BCX5316TC Standard AL 13 12 4,000 BCX5316-13R Standard AL 13 12 4,000 BCX5110TC Standard AC 13 12 4,000 BCX51TC Standard AA 13 12 4,000 BCX5210TC Standard AG 13 12 4,000 BCX5216TC Standard AM 13 12 4,000 BCX52TC Standard AE 13 12 4,000 BCX5310TC Standard AK 13 12 4,000 BCX53TCStandardAH13124,000Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.2. See https:///quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.4. For packaging details, go to our website at https:///design/support/packaging/diodes-packaging/.Top View Device SymbolTop View Pin-Out SOT89E C BMarking InformationAbsolute Maximum Ratings (@ T A = +25°C, unless otherwise specified.)CharacteristicSymbol BCX51 BCX52 BCX53 Unit Collector-Base Voltage V CBO -45 -60 -100 V Collector-Emitter Voltage V CEO -45-60 -80V Emitter-Base Voltage V EBO -5 V Continuous Collector CurrentI C -1 A Peak Pulse Collector Current (Single pulse) I CM -2 Continuous Base CurrentI B -100 mAPeak Pulse Base Current (Single pulse) I BM-200Thermal Characteristics (@ T A = +25°C, unless otherwise specified.)CharacteristicSymbol Value Unit Power Dissipation(Note 5) P D1 W(Note 6) 1.5 (Note 7) 2.0 Thermal Resistance, Junction to Ambient Air (Note 5) R θJA 125 °C/W (Note 6) 83 (Note 7)60 Thermal Resistance, Junction to Lead (Note 8) R θJL 13 °C/W Thermal Resistance, Junction to Case (Note 9)R θJC 27 °C/W Operating and Storage Temperature Range T J, T STG-55 to +150°CESD Ratings (Note 10)CharacteristicSymbol Value Unit JEDEC ClassElectrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine ModelESD MM400VCNotes: 5. For a device mounted with the exposed collector pad on 15mm x 15mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state.6. Same as Note 5, except the device is mounted on 25mm x 25mm 1oz copper.7. Same as Note 5, except the device is mounted on 50mm x 50mm 1oz copper.8. Thermal resistance from junction to solder-point (on the exposed collector pad).9. Thermal resistance from junction to the top of the case.10. Refer to JEDEC specification JESD22-A114 and JESD22-A115.xx = Product Type Marking Code, as follows:BCX51 = AA BCX52 = AEBCX53 = AH BCX5110 = AC BCX5210 = AG BCX5310 = AK BCX5116 = AD BCX5216 = AMBCX5316 = ALThermal Characteristics and Derating Information2550751001251500.00.20.40.60.81.0Derating CurveTemperature (°C) M a x P o w e r D i s s i p a t i o n (W )Transient Therm al Im pedanceT h e r m a l R e s i s t a n c e (°C /W )Pulse Width (s)Pulse Power DissipationPulse Width (s)M a x P o w e r D i s s i p a t i o n (W )Copper Area (sqmm)M a x i m u m P o w e r (W )Copper Area (sqmm)T h e r m a l R e s i s t a n c e (°C /W )Note:11. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%.Typical Electrical Characteristics (@ T A = +25°C, unless otherwise specified.)-I , COLLECTOR CURRENT (A)C h ,D C C U R RE N T G A I NF E Fig. 2 Typical DC Current Gain vs. Collector CurrentDC Current Gain vs. Collector Current -V , COLLECTOR-EMITTER VOLTAGE (V)CE I , C O L L E C T O R C U R R E N T (A )CFig. 1 Typical Collector Current vs. Collector-Emitter VoltageCollector Current vs. Collector-Emitter Voltage -h FE V I CI C V V CETypical Electrical Characteristics (continued.)0.20.40.60.81.0-V , B A S E -E M I T T E R T U R N -O N V O L T A G E (V )B E (O N)-I , COLLECTOR CURRENT (A)C -V , C O L L E C T O R -E M I T T E R S A T U R A T I O N V O L T A G E (V )C E (S A T )Fig. 4 Typical Collector-Emitter Saturation Voltagevs. Collector Current 0.20.40.60.81.01.2-V , B A S E -E M I T T E R S A T U R A T I O N V O L T A G E (V B E (S AT )-I , COLLECTOR CURRENT (mA)C f , G A I N -B A ND W I D T H P R O D U C T (M H z )T Fig. 6 Typical Gain-Bandwidth Product vs. Collector Current V , REVERSE VOLTAGE (V)R C A P A C I T A N C E (p F )Fig. 7 Typical Capacitance Characteristics -V B E (s a t ), B A S E -E M I T T E R S A T U R A T I O N V O L T A G E )-V B E (o n ), B A S E -E M I T T E R T U R N -O N V O L T A G E (V )-V C E (s a t ) , C O L L E C T O R -E M I T T E RC v V RVCE(sat) V I Cf T V I CPackage Outline DimensionsPlease see /package-outlines.html for the latest version.SOT89SOT89Dim Min Max TypA 1.40 1.60 1.50B 0.50 0.62 0.56B1 0.42 0.540.48c 0.35 0.43 0.38D 4.40 4.60 4.50D1 1.62 1.83 1.733D2 1.61 1.81 1.71E 2.40 2.60 2.50E2 2.05 2.35 2.20e - - 1.50H 3.95 4.25 4.10H1 2.63 2.93 2.78L 0.90 1.20 1.05L1 0.327 0.527 0.427z 0.20 0.40 0.30All Dimensions in mmSuggested Pad LayoutPlease see /package-outlines.html for the latest version.SOT89Dimensions Value(in mm)C 1.500G 0.244X 0.580X1 0.760X2 1.933Y 1.730Y1 3.030Y2 1.500Y3 0.770Y4 4.530TOP VIEW。
BLZP 5.08 10 270 SN BK BX Datasheet说明书
GermanyFon: +49 5231 14-0Fax: +49 5231 14-2083Socket connectors with clamping yoke screw connectionfor conductor connection with a right-angle (90° or 270°)outlet direction. The female connectors provide space forlabelling and can be coded. Can be fastened with flange orrelease latch. They feature an integrated plus/minus screw,protection against false insertion under clamping yoke. Theyare delivered with an opened clamping yoke.• 0.2-2.5 mm2 (IEC) / 26-12 AWG (UL)• 400 V (IEC) / 300 V (UL)• 15 A (IEC) / 10 A (UL)General ordering dataOrder No.1949100000Part designation BLZP 5.08/10/270 SN BK BXVersion PCB plug-in connector, female plug, 5.08mm, No. of poles: 10, 270°, Clamping yokeconnection, Clamping range, max.: 4 mm², BoxGTIN (EAN)4032248626557Qty.36 pc(s).Packaging BoxGermanyFon: +49 5231 14-0Fax: +49 5231 14-2083Conductor connection system Clamping yoke connection Outgoing direction of conductor270°Pitch in mm 5.08 mm Pitch in inch0.2 inch No. of poles10No. of rows1 Screwdriver blade0.6 x 3.5Screwdriver blade standard DIN 5264 Tightening torque, min.0.4 Nm Tightening torque, max.0.5 Nm Clamping screw M 2.5Stripping length7 mmL1 in mm45.72 mm L1 in inch 1.8 inch Electric shock protection to DIN VDE 57 106Safe from finger touchInsulating material PBT Colour black colour chart Similar to RAL 9011Flammability class UL 94V-0CTI≥ 200Contact material Copper alloy Contact surface tinned Contact base material Copper alloyHighest continous operating temperature,min.-25 °C Highest continous operating temperature,max.100 °CClamping range, min.0.13 mm²Clamping range, max. 4 mm²Conductor connection cross-section AWG,min.AWG 26Conductor connection cross-section AWG,max.AWG 12Solid, min. H05(07) V-U0.2 mm²Solid, max. H05(07) V-U 4 mm²Flexible, min. H05(07) V-K0.2 mm²Flexible, max. H05(07) V-K 4 mm²w. wire end ferrule, DIN 46228 pt 1, min0.2 mm²with wire end ferrule, DIN 46228 pt 1, max. 4 mm²w. plastic collar ferrule, DIN 46228 pt 4, min.0.2 mm²with plastic collar ferrule, DIN 46228 pt 4,max. 2.5 mm²Gauge to EN 60999 a x b; ø 2.8 mm x 2.4 mmRated current, min. No. of poles (Tu=20°C)15.5 A Rated current, max. No. of poles (Tu=20°C)13 A Rated current, no. of poles (Tu=40°C), min.12 A Rated current, no. of poles (Tu=40°C), max.10.5 ARated voltage for overvoltage class/pollution severity II/2400 V Rated voltage for overvoltage class/pollution severity III/2320 VRated voltage at overvoltage category/pollution degree III/3250 V Rated impulse withstand voltage for overvoltage class/pollution severity II/2 4 kVRated impulse withstand voltage for overvoltage class/pollution severity III/2 4 kV Rated impulse withstand voltage for overvoltage class/pollution severity III/3 4 kVShort-time withstand current resistance 3 x 1s with 120 ARated voltage (Use group B)300 V Rated current (use group B)10 A Rated voltage (Use group C)50 V Rated voltage (use group D)300 V Rated current (use group D)10 A Wire cross-section, AWG, min.AWG 26 Wire cross-section, AWG, max.AWG 12Rated voltage (use group B)300 V Rated current (use group B)10 A Rated voltage (use group C)50 V Rated voltage (use group D)300 V Rated current (use group D)10 A Wire cross-section, AWG, min.AWG 26 Wire cross-section, AWG, max.AWG 12GermanyFon: +49 5231 14-0Fax: +49 5231 14-2083• Rated current related to rated cross-section and min. No. of poles.• Wire end ferrule without plastic collar to DIN 46228 pt 1• Wire end ferrule with plastic collar to DIN 46228 pt 4• P on drg. = pitch• Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.GermanyFon: +49 5231 14-0 Fax: +49 5231 14-2083 GermanyFon: +49 5231 14-0Fax: +49 5231 SL 5.08/90Male connectors with 90° outlet direction. The solder pin length is optimised for wave flow soldering. The male connectors provide space for labelling and can be coded.Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 18 A (IEC) / 15 A (UL)1508860000header, 5.08 mm, No. of poles:10, 90°, Solder pin length: 3.2mm, tinned, Orange, Solder connection, BoxSLD 5.08/90G2-tier male connector with parallel pin arrangement. The solder pin length is optimised for wave flow soldering. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 11 A (IEC) / 10 A (UL)1601870000header, 5.08 mm, No. of poles:20, 90°, Solder pin length: 3.2mm, tinned, Orange, Solder connection, BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SLDF 5.08Male connector for through-panel mounting with optional locking function. Internal connection as flat-blade or solder connection. These male connectors provide space for labelling and can be coded. Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 15 A (IEC) / 10 A (UL)1599210000header, 5.08 mm, No. of poles:10, 180°, Clamping range,max.: , BoxSL-SMT 5.08/180G BoxHigh-temperature-resistant male connector, packed in box or tape. In tape with 1.5 mm solder pin optimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors can be labelled and coded.• 400 V (IEC) / 300 V (UL)• 19 A (IEC) / 15 A (UL)1838290000header, 5.08 mm, No. of poles:10, 180°, Solder pin length:3.2 mm, tinned, black, Reflow solder connection, Box1776002001SL-SMT 5.08/10/180G 1.5SN BK BXPCB plug-in connector, male header, 5.08 mm, No. of poles:10, 180°, Solder pin length:1.5 mm, tinned, black, Reflow solder connection, Box403224815899750 pc(s).BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SL-SMT 5.08/180 BoxHigh-temperature-resistant, straight, open ended maleconnector. Packed in box or tape. In tape with 1.5 mm solder pin optimised for automatic assembly. 3.2 mm solder pinsuitable for reflow and wave soldering. These male connectors can be labelled and coded.• 400 V (IEC) / 300 V (UL)• 19 A (IEC) / 15 A (UL)1838060000header, 5.08 mm, No. of poles:10, 180°, Solder pin length:3.2 mm, tinned, black, Reflow solder connection, Box1775682001SL-SMT 5.08/10/180 1.5SN BK BXPCB plug-in connector, male header, 5.08 mm, No. of poles:10, 180°, Solder pin length:1.5 mm, tinned, black, Reflowsolder connection, Box403224815832450 pc(s).BoxSL-SMT 5.08/90G BoxHigh-temperature-resistant male connector, packed in box or tape. In tape with 1.5 mm solder pin optimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors can be labelled and coded.• 400 V (IEC) / 300 V (UL)• 19 A (IEC) / 15 A (UL)1780260000SL-SMT 5.08/10/90G 3.2SN BK BXPCB plug-in connector, male header, 5.08 mm, No. of poles:10, 90°, Solder pin length:3.2 mm, tinned, black, Reflow solder connection, Box403224816558250 pc(s).Box1775082001SL-SMT 5.08/10/90G 1.5SN BK BXPCB plug-in connector, male header, 5.08 mm, No. of poles:10, 90°, Solder pin length:1.5 mm, tinned, black, Reflow solder connection, Box403224815655950 pc(s).BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SL 5.08/180Male connectors with straight outlet direction. The solder pin length is optimised for wave flow soldering. The male connectors provide space for labelling and can be coded.Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 18 A (IEC) / 15 A (UL)1518060000header, 5.08 mm, No. of poles:10, 180°, Solder pin length: 3.2mm, tinned, Orange, Solder connection, BoxSL 5.08/135Male connectors with 135° outlet direction. The solder pin length is optimised for wave flow soldering. The male connectors provide space for labelling and can be coded.Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 17 A (IEC) / 15 A (UL)1603140000header, 5.08 mm, No. of poles:10, 135°, Solder pin length: 3.2mm, tinned, Orange, Solder connection, BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SL-SMT 5.08/90 BoxHigh-temperature-resistant, 90° angled, open male connector.Packed in box or tape. In tape with 1.5 mm solder pinoptimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors can be labelled and coded.• 400 V (IEC) / 300 V (UL)• 19 A (IEC) / 15 A (UL)1780030000header, 5.08 mm, No. of poles:10, 90°, Solder pin length:3.2 mm, tinned, black, Reflow solder connection, Box1774842001SL-SMT 5.08/10/90 1.5SN BK BXPCB plug-in connector, male header, 5.08 mm, No. of poles:10, 90°, Solder pin length:1.5 mm, tinned, black, Reflowsolder connection, Box403224815588050 pc(s).BoxSLD 5.08/180G2-tier male connector with parallel pin arrangement. The solder pin length is optimised for wave flow soldering. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 11 A (IEC) / 10 A (UL)1602470000SLD 5.08/20/180G 3.2SN OR BXPCB plug-in connector, male header, 5.08 mm, No. of poles:20, 180°, Solder pin length: 3.2mm, tinned, Orange, Solder connection, Box400819005995820 pc(s).BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SL 5.00/90Male connectors with 90° outlet direction. The solder pin length is optimised for wave flow soldering. The male connectors provide space for labelling and can be coded.Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 18 A (IEC) / 15 A (UL)1626060000header, 5 mm, No. of poles:10, 90°, Solder pin length:4.5 mm, tinned, black, Solder connection, Box1571210000SL 5.00/10/90 3.2SN OR BXPCB plug-in connector, male header, 5 mm, No. of poles:10, 90°, Solder pin length: 3.2mm, tinned, Orange, Solder connection, Box400819006832550 pc(s).BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SLS 5.08TB KF35Male connector with screw clamping yoke connection for connecting conductors. Clip-on feet for mounting on terminal rail. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 12 AWG (UL)• 400 V (IEC) / 300 V (UL)• 21.5 A (IEC) / 15 A (UL)1846160000plug, 5.08 mm, No. of poles:10, 180°, Clamping yoke connection, Clamping range,max.: 3.31 mm², BoxSLZF 5.08/180FIMale connector with tension clamp connection for connecting conductors. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 14 AWG (UL)• 400 V (IEC) / 300 V (UL)• 23 A (IEC) / 15 A (UL)1846590000plug, 5.08 mm, No. of poles:10, 180°, Tension clamp connection, Clamping range,max.: 3.31 mm², BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SL 5.08/90BMale connectors with 90° outlet direction. The solder pin length is optimised for wave flow soldering. The male connectors provide space for labelling and can be coded.Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 18 A (IEC) / 15 A (UL)1511160000header, 5.08 mm, No. of poles:10, 90°, Solder pin length: 3.2mm, tinned, Orange, Solder connection, BoxSL-SMT 5.08/180LF BoxHigh-temperature-resistant male connector, packed in box or tape. In tape with 1.5 mm solder pin optimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors can be labelled and coded.• 400 V (IEC) / 300 V (UL)• 19 A (IEC) / 15 A (UL)1776442001header, 5.08 mm, No. of poles:10, 180°, Solder pin length:1.5 mm, tinned, black, Reflow solder connection, Box1838520000SL-SMT 5.08/10/180LF 3.2SN BK BXPCB plug-in connector, male header, 5.08 mm, No. of poles:10, 180°, Solder pin length:3.2 mm, tinned, black, Reflow solder connection, Box403224834858950 pc(s).BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SLZF 5.08/270BMale connector with tension clamp connection for connecting conductors. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 14 AWG (UL)• 400 V (IEC) / 300 V (UL)• 23 A (IEC) / 15 A (UL)1706220000plug, 5.08 mm, No. of poles:10, 270°, Tension clamp connection, Clamping range,max.: 3.31 mm², BoxSL-SMT 5.00/90LF BoxHigh-temperature-resistant male connector, packed in box or tape. In tape with 1.5 mm solder pin optimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors can be labelled and coded.• 400 V (IEC) / 300 V (UL)• 19 A (IEC) / 15 A (UL)1797310000header, 5 mm, No. of poles: 10,90°, Solder pin length: 1.5 mm,tinned, black, Reflow solder connection, Box1840430000SL-SMT 5.00/10/90LF 3.2SN BK BXPCB plug-in connector, male header, 5 mm, No. of poles: 10,90°, Solder pin length: 3.2 mm,tinned, black, Reflow solder connection, Box403224835127550 pc(s).BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SLDV-THR 5.08/180FHigh-temperature-resistant, 2-tier, laterally offset male connector with flange or solder flange. 1.5 mm solder pin suitable for reflow soldering. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors can be labelled and coded. Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 15 A (IEC) / 10 A (UL)1828850000header, 5.08 mm, No. of poles:20, 180°, Solder pin length:3.2 mm, tinned, black, Reflow solder connection, Box1828970000SLDV-THR 5.08/20/180F 1.5SN BK BXPCB plug-in connector, male header, 5.08 mm, No. of poles:20, 180°, Solder pin length:1.5 mm, tinned, black, Reflowsolder connection, Box403224833566420 pc(s).BoxSLZF 5.08/180BMale connector with tension clamp connection for connecting conductors. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 14 AWG (UL)• 400 V (IEC) / 300 V (UL)• 23 A (IEC) / 15 A (UL)1710290000SLZF 5.08/10/180B SN OR BXPCB plug-in connector, male plug, 5.08 mm, No. of poles:10, 180°, Tension clamp connection, Clamping range,max.: 3.31 mm², Box400819031960150 pc(s).BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SLZF 5.08/180FMale connector with tension clamp connection for connecting conductors. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 14 AWG (UL)• 400 V (IEC) / 300 V (UL)• 23 A (IEC) / 15 A (UL)1847040000plug, 5.08 mm, No. of poles:10, 180°, Tension clamp connection, Clamping range,max.: 3.31 mm², BoxSL 5.08/180BMale connectors with straight outlet direction. The solder pin length is optimised for wave flow soldering. The male connectors provide space for labelling and can be coded.Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 18 A (IEC) / 15 A (UL)1520360000header, 5.08 mm, No. of poles:10, 180°, Solder pin length: 3.2mm, tinned, Orange, Solder connection, BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SLS 5.08TB RF15Male connector with screw clamping yoke connection for connecting conductors. Clip-on feet for mounting on terminal rail. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 12 AWG (UL)• 400 V (IEC) / 300 V (UL)• 21.5 A (IEC) / 15 A (UL)1846080000plug, 5.08 mm, No. of poles:10, 180°, Clamping yoke connection, Clamping range,max.: 3.31 mm², BoxSLDV-THR 5.08/180FLFHigh-temperature-resistant, 2-tier, laterally offset male connector with flange or solder flange. 1.5 mm solder pin suitable for reflow soldering. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors can be labelled and coded. Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 15 A (IEC) / 10 A (UL)1829090000header, 5.08 mm, No. of poles:20, 180°, Solder pin length:3.2 mm, tinned, black, Reflow solder connection, Box1829210000SLDV-THR 5.08/20/180FLF 1.5SN BK BXPCB plug-in connector, male header, 5.08 mm, No. of poles:20, 180°, Solder pin length:1.5 mm, tinned, black, Reflow solder connection, Box403224833590920 pc(s).BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SLS 5.08/180BMale connector with screw clamping yoke connection for connecting conductors. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 12 AWG (UL)• 400 V (IEC) / 300 V (UL)• 21.5 A (IEC) / 15 A (UL)1627320000plug, 5.08 mm, No. of poles:10, 180°, Clamping yoke connection, Clamping range,max.: 3.31 mm², BoxSLZF 5.08/90BMale connector with tension clamp connection for connecting conductors. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 14 AWG (UL)• 400 V (IEC) / 300 V (UL)• 23 A (IEC) / 15 A (UL)1673630000plug, 5.08 mm, No. of poles: 10,90°, Tension clamp connection,Clamping range, max.: 3.31mm², BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SL-SMT 5.08/90LF BoxHigh-temperature-resistant male connector, packed in box or tape. In tape with 1.5 mm solder pin optimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors can be labelled and coded.• 400 V (IEC) / 300 V (UL)• 19 A (IEC) / 15 A (UL)1775312001header, 5.08 mm, No. of poles:10, 90°, Solder pin length:1.5 mm, tinned, black, Reflow solder connection, Box1780490000SL-SMT 5.08/10/90LF 3.2SN BK BXPCB plug-in connector, male header, 5.08 mm, No. of poles:10, 90°, Solder pin length:3.2 mm, tinned, black, Reflowsolder connection, Box403224816581050 pc(s).BoxSL-SMT 5.08/90F BoxHigh-temperature-resistant male connector, packed in box or tape. In tape with 1.5 mm solder pin optimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors can be labelled and coded.• 400 V (IEC) / 300 V (UL)• 19 A (IEC) / 15 A (UL)1837710000SL-SMT 5.08/10/90F 3.2SN BK BXPCB plug-in connector, male header, 5.08 mm, No. of poles:10, 90°, Solder pin length:3.2 mm, tinned, black, Reflow solder connection, Box403224834752050 pc(s).BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SL 5.00/90BMale connectors with 90° outlet direction. The solder pin length is optimised for wave flow soldering. The male connectors provide space for labelling and can be coded.Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 18 A (IEC) / 15 A (UL)1580940000header, 5 mm, No. of poles:10, 90°, Solder pin length: 3.2mm, tinned, Orange, Solder connection, BoxSLS 5.08/180FMale connector with screw clamping yoke connection for connecting conductors. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 12 AWG (UL)• 400 V (IEC) / 300 V (UL)• 21.5 A (IEC) / 15 A (UL)1846440000plug, 5.08 mm, No. of poles:10, 180°, Clamping yoke connection, Clamping range,max.: 3.31 mm², BoxGermanyFon: +49 5231 14-0Fax: +49 5231 SL 5.08/135BMale connectors with 135° outlet direction. The solder pin length is optimised for wave flow soldering. The male connectors provide space for labelling and can be coded.Packed in cardboard box.• 400 V (IEC) / 300 V (UL)• 17 A (IEC) / 15 A (UL)1605610000header, 5.08 mm, No. of poles:10, 135°, Solder pin length: 3.2mm, tinned, Orange, Solder connection, BoxSLS 5.08/180FIMale connector with screw clamping yoke connection for connecting conductors. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 12 AWG (UL)• 400 V (IEC) / 300 V (UL)• 21.5 A (IEC) / 15 A (UL)1846290000plug, 5.08 mm, No. of poles:10, 180°, Clamping yoke connection, Clamping range,max.: 3.31 mm², BoxSystem pitch 5.08 mm (0.200 inch)BLZP 5.08/10/270 SN BK BXWeidmüller Interface GmbH & Co. KG Klingenbergstraße 16D-32758 Detmold GermanyFon: +49 5231 14-0Fax: +49 5231 Creation date July 20, 2010 8:52:21 PM CESTLast update 28.05.2010 / We reserve the right to make technical changes.21SLT 5.08BMale connectors with screw TOP connection for connecting conductors. The male connectors provide space for labelling and can be coded. Packed in cardboard box.• 0.20 - 2.5 mm² (IEC) / 26 - 14 AWG (UL)• 400 V (IEC) / 300 V (UL)• 16 A (IEC) / 10 A (UL)1611790000plug, 5.08 mm, No. of poles:10, 180°, TOP connection,Clamping range, max.: 2.5mm², BoxSL-SMT 5.08/180F BoxHigh-temperature-resistant male connector, packed in box or tape. In tape with 1.5 mm solder pin optimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors can be labelled and coded.• 400 V (IEC) / 300 V (UL)• 19 A (IEC) / 15 A (UL)1820780000header, 5.08 mm, No. of poles:10, 180°, Solder pin length:3.2 mm, tinned, black, Reflow solder connection, Box。
幸运光电 KW4-566XBB 0.56英寸四位数数字显示器技术数据表说明书
Tstg
-40℃ to +85℃
Soldering Temperature
Tsld
260℃ for 5 Seconds
Electrical Optical Characteristics at Ta=25℃
Parameters
Symbol Min. Typ. Max. Unit
Test Condition
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
IF=20mA
Reverse Current
IR
--- --- 10 µA
VR=5V
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
MORNSUN LS08-13BxxSS系列AC DC电源说明书
8W,DIY AC/DC converterRoHSFEATURES●Ultra-wide 85-305VAC and 100-430VDC input voltage range ●Accepts AC or DC input (dual-use of same terminal)●Operating ambient temperature range:-40℃~+85℃●Multi-application available,flexible layout ●High power density,high reliability●Low power consumption,green power●Output short circuit,over-current protection●Designed to meet IEC/EN/UL62368safety standards (Pending)●Designed to meet IEC/EN/UL60335safety standardsLS08-13BxxSS series is one of Mornsun’s highly efficient green power AC-DC Converter series.They feature ultra-wide wide input rangeaccepting either AC or DC voltage,high efficiency,low power consumption and CLASS II reinforced insulation.All models are particularly suitable for industrial control,electric power,instrumentation and smart home applications which don’t have high requirement for dimension.A variety of EMC external circuits meet the needs of multiple industries.Input SpecificationsItemOperating Conditions Min.Typ.Max.Unit Input Voltage Range AC input 85--305V AC DC input100--430VDC Input Frequency 47--63HzInput Current 115V AC ----0.3A 277V AC ----0.15Inrush Current115V AC --15--277V AC--30--Recommended External Input Fuse 1A,slow-blow,requiredHot PlugUnavailableOutput SpecificationsItemOperating Conditions Min.Typ.Max.UnitOutput Voltage Accuracy 0%-100%load 3.3V output --±1.5±3%Other output--±1±2Line Regulation Rated load --±0.5±1Load Regulation 0%-100%load--±1±1.5Ripple &Noise *20MHz bandwidth (peak-to-peak value)--80150mV Temperature Coefficient --±0.02--%/°C Short Circuit Protection Hiccup,continuous,self-recoveryOver-current Protection ≥110%Io,self-recoveryMinimum Load----%Note:*The “parallel cable”method is used for ripple and noise test,please refer to AC-DC Converter Application Notes for specific information.Selection GuideCertificationPart No.Output PowerNominal Output Voltage and Current (Vo/Io)Efficiency at 230V AC(%)Typ.Capacitive Load(µF)Max.CE/UL/CB (Pending)LS08-13B03SS 5.28W3.3V/1600mA 701500LS08-13B05SS8W 5V/1600mA 741500LS08-13B09SS 9V/880mA 751000LS08-13B12SS 12V/670mA 76680LS08-13B15SS 15V/530mV 77470LS08-13B24SS24V/330mA79330General SpecificationsItem Operating Conditions Min.Typ.Max.UnitIsolation Test Input-output Electric Strength Test for1min.,(leakage current<5mA)3000----VACOperating Temperature-40--+85℃Storage Temperature-40--+105Storage Humidity----95%RHPower Derating -40℃~-25℃ 2.67----%/℃+55℃~+85℃ 2.5----85V AC-100VAC1----277V AC-305V AC0.54----Safety Standard IEC/EN/UL62368,IEC/EN/UL60335 Safety Certification IEC/EN/UL62368(Pending) Safety CLASS CLASS IIMTBF MIL-HDBK-217F@25°C>300,000h Mechanical SpecificationsCase Material44.50x24.00x15.00mmWeight11g(Typ.)Cooling method Free air convectionElectromagnetic Compatibility(EMC)Emissions CECISPR32/EN55032CLASS A(Recommended circuit1,4)CISPR32/EN55032CLASS B(Recommended circuit2,3) RECISPR32/EN55032CLASS A(Recommended circuit1,4)CISPR32/EN55032CLASS B(Recommended circuit2,3)Immunity ESD IEC/EN61000-4-2Contact±6KV Perf.Criteria B RS IEC/EN61000-4-310V/m perf.Criteria AEFTIEC/EN61000-4-4±2KV(Recommended circuit1,2)perf.Criteria BIEC/EN61000-4-4±4KV(Recommended circuit3,4)perf.Criteria B SurgeIEC/EN61000-4-5line to line±1KV(Recommended circuit1,2)perf.Criteria BIEC/EN61000-4-5line to line±2KV(Recommended circuit3,4)IEC/EN61000-4-5line to line±4KV(Recommended circuit4)perf.Criteria B CS IEC/EN61000-4-610Vr.m.s perf.Criteria A Voltage dips,shortinterruptions and voltagevariations immunityIEC/EN61000-4-110%,70%perf.Criteria BProduct Characteristic CurveNote:①With an AC input between85-100VAC/277-305VAC and a DC input between100-120VDC/390-430VDC,the output power must be derated as per temperature derating curves;②This product is suitable for applications using natural air cooling;for applications in closed environment please consult factory or one of our FAE.Additional Circuits Design ReferenceLS series additional circuits design referenceLS08series additional components selection guidePart No.FUSE(required)C1required)C2(required)L1(required)C3(required )C4CY1(required )LS08-13B03SS 1A/300V22µF/450V470µF/16V(solid-state capacitor) 4.7µH 150µF/35V 0.1µF/50V1.0nF/400V ACLS08-13B05SS LS08-13B09SS 220µF/16V(solid-state capacitor)100µF/35V LS08-13B12SS LS08-13B15SS 470uF/35V 47µF/35VLS08-13B24SS220uF/35VNote:1.C1:input capacitors,C2:output storage capacitors,they must be connected externally.2.We recommend using an electrolytic capacitor with high frequency and low ESR rating for C3(refer to manufacture’s datasheet).Combined with C2,L1,they form a pi-type filter circuit.Choose a capacitor voltage rating with at least 20%margin,in other words not exceeding 80%.C4is a ceramic capacitor,used for filtering high frequency noise.A suppressor diode (TVS)is a recommended to protect the application in case of a converter failure and specification should be 1.2times of the output voltage.Immunity design circuits for referenceEmissions design circuits for referenceCLASS ⅢCLASS ⅣCLASS ACLASS BEnvironmental Application EMC SolutionLS series environmental application EMC solution selection tableRecommendedcircuit Application environmental Typical industryInput voltagerangeEnvironment temperature Emissions Immunity 1Basic applicationNone85~305V AC -40℃~+85℃CLASS A CLASS Ⅲ2Indoor civil environment Smart home/Home appliances(2Y)-25℃~+55℃CLASS BCLASS ⅢIndoor general environment Intelligent building/Intelligentagriculture 3Indoor industrial environment Manufacturing workshop -25℃~+55℃CLASS B CLASS Ⅳ4Outdoor general environmentITS/Video monitoring/Charging point/Communication/Securityand protection-40℃~+85℃CLASS ACLASS ⅣOutdoor harsh environmentOn-line power meter Communication base station-40℃~+85℃CLASS A>CLASS ⅣSurge:line to ground ±4KV EFT:CLASS ⅣElectromagnetic Compatibility Solution--Recommended Circuit1.Recommended circuit 1——Basic applicationrecommended circuit 1Application environmentalAmbient temperature rangeImmunity CLASSEmissions CLASSBasic application-40℃~+85℃CLASS ⅢCLASS AComponentRecommended valueR112Ω/3W LDM4.7mH2.Recommended circuit 2——Indoor civil /Universal system recommended circuits for general environmentRecommended circuit 2Application environmentalAmbient temperature rangeImmunity CLASSEmissions CLASS Indoor civil /general -25℃~+55℃CLASS ⅢCLASS BComponentRecommended valueR112Ω/3W CY1(CY2) 1.0nF/400V ACLCM 3.5mH LDM 0.33mH CX0.1µF/310VAC FUSE (required)1A/300V ,slow-blowNote:In the home appliance application environment,the two Y capacitors of the primary and secondary need to be externally connected (CY1/CY2,value at 2.2nF/400VAC),which can meet the EN60335certification.In other industries,only one Y capacitor is needed.3.Recommended circuit 3——Universal system recommended circuits for indoor industrial environmentRecommended circuit 3Application environmental Ambienttemperature rangeImmunity CLASSEmissions CLASSIndoor industrial-25℃~+55℃CLASS ⅣCLASS BComponentRecommended valueMOV S14K350C1450V/22uF CY1 2.2nF/400V AC CX 0.1µF/310V ACLCM 3.5mH LDM 0.33mH R112Ω/3WFUSE (required)2A/300V ,slow-blow4.Recommended circuit 4——Universal system recommended circuits for outdoor general/harsh environmentRecommended circuit 4Application environmental Ambienttemperature rangeImmunity CLASSEmissions CLASSOutdoor general environment-40℃~+85℃CLASS ⅣCLASS AComponentRecommended valueMOV S14K350C1450V/22uF LDM 4.7mH R112Ω/3WFUSE (required)2A/300V ,slow-blowApplication environmental Ambient temperaturerangeImmunity CLASS EmissionsCLASSOutdoor harsh environment -40℃~+85℃>CLASSⅣSurge:line to ground±4KVEFT:CLASSⅣCLASS AComponent Recommended valueMOV S20K350C1450V/33uF(Surge protection priority)LDM 4.7mHR133Ω/5WFUSE(required) 6.3A/300V,slow-blow5.For additional information please refer to application notes on . LS08-13BxxSS Dimensions and Recommended LayoutNote:1.For additional information on Product Packaging please refer to .Packaging bag number:58220032;2.External electrolytic capacitors are required to modules,more details refer to typical applications;3.This part is open frame,at least6.4mm safety distance between the primary and secondary external components of the module isneeded to meet the safety requirement;4.Unless otherwise specified,parameters in this datasheet were measured under the conditions of Ta=25℃,humidity<75%,nominal inputvoltage(115V and230V)and rated output load;5.In order to improve the efficiency at light load,there will be audible noise generated,but it does not affect product performance andreliability;6.Module required dispensing fixed after assembled;7.All index testing methods in this datasheet are based on our company corporate standards;8.We can provide product customization service,please contact our technicians directly for specific information;9.Products are related to laws and regulations:see"Features"and"EMC";10.Our products shall be classified according to ISO14001and related environmental laws and regulations,and shall be handled byqualified units.Mornsun Guangzhou Science&Technology Co.,Ltd.Address:No.5,Kehui St.1,Kehui Development Center,Science Ave.,Guangzhou Science City,Huangpu District,Guangzhou,P.R.China Tel:86-20-38601850Fax:86-20-38601272E-mail:***************。
VERSATIS 570 數位式無線電話機 使用說明書
VERSATIS 570數位式無線電話機使用說明書為充分發揮本機功能,在您使用前請詳細閱讀本說明書,並妥善保存,作為日後參考(一)目錄 .............................. 1(二)本機特點 ........................ 2(三)安裝方法 ........................ 2(四)外型及各部位名稱 ............ 3(五)使用說明 ........................ 4 接聽電話 ........................ 4 撥打電話 ........................ 4 預覽撥號 ........................ 4 靜音功能 ........................ 5 免持對講功能 .................. 5 呼叫功能 ........................ 5 內線對講 ........................ 5 關閉手機電源 .................. 5 電話簿儲存功能 ............... 6 座機鈴聲音量設定 ............ 7 座機鈴聲音樂選擇 ............ 7 選擇座機 ........................ 7 刪除手機 ........................ 8 更改密碼 ........................ 8 開/關-外線來鈴的優先順序.8 設定外線來鈴的優先順序 ... 9 撥號方式的設定 ............... 9 R鍵時間設定 .................. 9 總機模式 ........................ 10 總機模式下暫停時間的設定.10 按鍵音的設定 .................. 11 電池警告音的設定 ............ 11 超過收訊範圍警告音的設定.11 手機鈴聲音量的設定 ......... 12 手機接收音量的設定 ......... 12 內部呼叫音樂的設定 (12)來電鈴聲音樂的設定 ......... 13 自動應答設定 .................. 13 手機名稱設定 .................. 13 語言的選擇 ..................... 14 註冊座機 ........................ 14 來電記憶使用 .................. 15 撥出記憶使用 .................. 15 恢復出廠值 ..................... 16 恢復出廠值後的語言設定 ... 16(六)規格 .............................. 17 來電顯示服務須知 ............ 18(七)簡易保養 ........................ 19(八)常見故障排除 (20)11.可增購符合本產品通訊協定的手機,一部座機可擴充至5支手機。
bbc bircher ag xl-cp42ax xl-cp49ax xl-cp56ax xl-cp
1XL-CP42Ax / XL-CP49Ax / XL-CP56Ax / XL-CP56Bx / XL-CP74Ax / XL-CP80Ax / XL-CP80Bx / XL-CP99Ax原版安装说明书应用1安全说明2部件概览中文390273E 02/22• 在将设备投入运行之前,应先彻底阅读本操作说明,并保留本操作说明以便将来参考。
• 除了规定的应用,不得将本产品用于其他用途。
• 安全触边的组装和安装以及更改或加装安全触边的调试只能由经过相关专业培训和授权的人员进行。
• 请注意遵守当地所有相关的电气安全规定!• 不遵守这些安全预防措施可能会导致传感器或者物体损坏、人员重伤或者死亡。
• 设备制造商有责任实施风险评估,并安装符合适用的本地、国家及国际规章和安全标准、法律和法规以及机械指令 2006/42/EC(如适用)的系统。
• 对于您的应用,始终将安全功能视作一个整体,切勿认为仅关系到系统的某一部分。
• 安装人员应负责测试系统,以确保系统满足所有适用的安全标准。
开始安装或组装之前,必须采取以下安全措施:• 确保不会接通设备/装置的电源!• 确定电源已断开!• 遮挡或拧下带电的相邻零件!• 接通电源之前,作为预防措施,请检查接线以防止任何会影响与本产品相连之设备的损坏或故障。
• 如果您要离开安装现场,请确保产品工作正常且安装正确。
请向建筑所有者/操作员说明操作工业门和本产品的正确方式。
安全触边安全监控器安全触边系统是按照标准 EN ISO 13856-2设计并满足其要求的压敏保护装置,安全触边系统由安全触边和安全监控器组成。
本说明书介绍了 XL 系列信号发生器的组装和安装。
本信号发生器是装在金属支撑型材上由柔性橡胶制成的主动感应型材。
按照 EN ISO 13856-2 标准使用本安全触条的信号发生器,需要使用由 BBC Bircher AG 指定的并经过规定的合格评估程序的安全监控器(信号处理器和输出监控装置)。
BA00BC0WT-V5中文资料
(Contact address for overseas customers in Japan)
Yokohama
As of 18.1
Contact us
Attached-1
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office.
Please contact our sales offices for details ;
U.S.A / San Diego Atlanta Dallas Germany / Dusseldorf TEL : +1(858)625-3630 TEL : +1(770)754-5972 TEL : +1(972)312-8818 TEL : +49(2154)9210 FAX : +1(858)625-3670 FAX : +1(770)754-0691 FAX : +1(972)312-0330 FAX : +49(2154)921400 FAX : +44(1)908-282-528
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
XTOB 过载保护关闭器框 B和C说明书
NEWXLBOM PUB51670XLDWGNOXLREVNO( 30 Characters Max. )DescriptionStockingU/M MK3PUB5167001XTOB OVERLOAD RELAY FR B & CEA XLCOLMNItem Balloon Item Part No.( 30 Characters Max. )Item DescriptionXLCOMPO00100200300400500600700800901099950-2500DIMENSIONING & TOLERANCE SPEC.EAREFXLBOMDONEFORM 468-1013 REV. 09 - MAPICS B/M PAGE 1This Uncontrolled Copy Was Printed On:XTOB OVERLOAD RELAY FRAME B AND C1 OF 1Part / Asm No.18-Sep-06129-1657XT-1M. DOWSKE B. WENNINGER M. SCHUBRINGQuantitiesP U B 5167018-Sep-06MAPICS Parts List ItemsPUB51670MAPICS™ Sites:01XT#10201NEWFILETYPE: EXCELDEV. NO.ECN NO.DATE TITLEDR.CHK.AP P .REVISIONPRODUCT CODETHE INFORMATION ON THIS DRAWING IS THE PROPERTY OF EATON | Cutler-Hammer, IS DISCLOSED IN CONFIDENCE AND IS NOT TO BE REPRODUCED,USED OR DISCLOSED EXCEPT FOR THE PURPOSE FOR WHICH FURNISHED.ITEMS BELOW THIS POINT ARE REFERENCE SPECIFICATONSSHEET NO.Unit of Measure (U/M)NOTES:1) PRINT ON OPAQUE WHITE 20 LB. PAPER2) FINISHED PUB WIDTH 135,0 ± 6 [5.3" ± .25"] X HEIGHT OF 254,0 ± 6 [10.0" ± .25"], WITH 3,0 [0.12] - 7,0 [0.28] WHITE SPACE AROUND EDGES.3) VISUALLY INSPECT PRINTED PUBLICATIONS FOR CLARITY, NO FADE PERMITTED.4) HIGH RESOLUTION PDF FILE FOR PRINTING OF PUBLICATION TO BE PROVIDED.DWG. NO.MS03-12-06AP P .DATEMILWAUKEE OPERATIONS & TECHNICAL CENTER - MILWAUKEE, WICOMPLIANTDo Not Print This Page.XTOB Overload Relay Frame B and Cpub51670 (01) MARCH 2006 Also refer to Warning! Motor may start automatically. Automatic start may injure persons and damage machines.Automatic restart is possible when "automatic reset" is active.Warnung! Automatischer Wiederanlauf des Motors kann zu Personen- und Sachsch ãden f ühren. Die Gefahr des automatischen Wiederanlaufs ist in der Betriebsart "Automatische R ückstellung" gegeben.Avertissement ! Le red émarrage automatique du moteur peut provoquer des d ég âts mat ériels et étre dangereux pour les personnes. Ce danger du red émarrage automatique correspond au mode «r éarmement.Avvertimento! Il riavvio automatico del motore pu ò provocare danni a persone e/o cose. Il pericolo del riavvio automatico si ha quandoll selettore è posizionato su "riarmo automatico".Advertencia! El motor puede arrancar automaticamente. Elarranque autom ático es posible cuando el "bot ón de reset" est á en posicion autom ático y el circuito de maniobra activado.FLA Settings1~3~Ultimate trip at 1.15 FLA (1 Phase)Grenzausl ösestrom 1.15 % (Phasenausfallempfindlichkeit)Sensibilit é au manque de phase (115 % du courant de r églage)Valore limite della corrente di intervento 115 %(Sensibilit à alla mancanza fase)Intensidad limite de disparo 115 % (Sensibilidad al defecto de fase)XTOBPI6XTOBP24XTOBP40XTOBP60XTOB001XTOB1P6XTOB2P4XTOB004XTOB006XTOB010XTOB012XTOB016XTOB024XTOB03225 25 25 25 25 25 25 25 25 50 50 63100125Ultimate trip at 1.20 FLA (3 Phase)Grenzausl ösestrom 120 % (3 Phasen)Courant limite de declenchement 120% (3 phases)Valore limite della corrente di intervento 120 % (3 fasi)Intersidad limite de disparo 120 % (3 fases)gL max.A"1"gL max.A"2"aM max.A"1"Cat. No.XTOB...BC1, 1 0.1 - 0.160.16 - 0.240.24 - 0.4 0.4 - 0.6 0.6 - 1.0 1.0 - 1.6 1.6 - 2.4 2.4 - 4 4 - 6 6 - 10 9 - 12 10 - 16 16 - 24 24 - 320.5 1 2 4 4 61016202525353563---------20252550502 4 698 9697 95XTOBOverload Relay Frames B and C.TEST9896OFF9795AH=Reset11223auto "without manual reset"Auto ohne Wiedereinschaltsperreautomatique sans r éarmement manuel senza riarmo manuale sin rearme manualManual "with manual reset"Hand mit Wiedereinschaltsperre manuel avec r éarmement manuel con riarmo manuale con rearme manualRESETH A3T1, T2, T3XTOB...BC11Nm 1.8 1.2lb-in 16 11O V E R L O A D R E L AYT O R Q U E S P E C I F I C AT I O N SDangerous Electrial Current! Only skilled or qualified persons may carry out the following operations.T1, T2, T3mm2min.max.95/96, 97/98mm2min.max.AWG T1, T2, T3min.max.AWG 95/96, 97/98min.max.XTOB...BC1XTOB---CC11Nm 1.2 3.2lb-in 11 28FRAME BOVERLOAD TO CONTACTOR TORQUEFRAME C1 61 61 61 614 814 80,75 40,75 2,50,75 40,75 2,518 1218 12Lebensgefahr durch elektrischen Strom! Nur Elektrofachkräfte und elektrotechnisch unterwiesene Personen düfen die im Folgenden beschriebenen Arbeiten ausführen.Tension électrique dangereuse ! Seules les personnes qualifées et averties doivent exécuter les travaux ci-après.Tensione elettrica: Pericolo di morte! Solo persone abilitate e qualificate possono eseguire le operazioni di seguito riportate.iCorriente eléctrica! iPeligro de muerte! El trabajo a continuación descrito debe ser realizado por personas cualificadas y advertidas.。
OFYR 烧烤平台扩展集 XL 2 说明书
MANUAL1. INTRODUCTIONTHANK YOU FOR PURCHASING AN OFYR® PRODUCT. THIS MANUAL IS INTENDED FOR YOUR OFYR® PLATE EXTENSION SET XL.SYMBOLS & ICONS Danger! Warning!1.1 OFYR® PLATE EXTENSION SET XLThe OFYR® Plate Extension Set XL takes outdoor cooking to a higher level. This special set for the OFYR® XL and the OFYR® Trailer consists of a Grill Stand with an integrated Food Bumper and a separate Cooking Plate with a diameter of 85 cm. The Plate Extension doubles the cooking surface, allowing you to prepare multiple ingredients and dishes at the same time. It is possible to combine the Cooking Plate with various accessories, allowing you to try out even more cooking techniques.1.2 OFYR® GRILL STANDThis Grill Stand is specially developed for the OFYR® Plate Extension Set XL and has an integrated Food Bumper to ensure optimal stability. The stand is placed around the fire of an OFYR cooking unit XL or OFYR Trailer, which leaves the cooking plate unobstructed. In addition, the stand is 26 cm high, making it easy to add wood to the fire while you are cooking. The Grill Stand can be combined with the OFYR® Cooking Plate (see 1.3) or the grill of an OFYR® Grill Round XL.1.3 OFYR® COOKING PLATEThe OFYR® Cooking Plate is made of black steel and has a diameter of 85cm. It is placed on top of the Grill Stand and functions as a second cooking surface. Compared to a regular OFYR® Cooking Unit, this cooking plate will take longer to heat up because of the height of the Grill Stand. The cooking plate can be treated like a regular OFYR Classic 85 Cooking Unit and can be combined with the OFYR® Pizza Oven 85, OFYR® Grill Round 85, OFYR® Horizontal Skewers Ring 85 and the OFYR® Rotisserie Set.A. OFYR® PLATE EXTENSION PLATEMaterial Black steelDimensions 85 x1.2 cmCooking surface 0.44 m2Weight 45 kgB. OFYR® PLATE EXTENSION GRILL STANDMaterial Black steelDimensions 80 x26 cmWeight 6.5 kg2. USETHE ITEMS MENTIONED BELOW ARE ALSO EXPLAINED THROUGH VIDEOSON 2.1 FIRST TIME USEDuring the manufacturing process, the centre of the cooking plate is pressed down slightly. When the cooking plate is heated, it will bend down even further. Make sure the fire is not too big during the first use, to prevent the cooking plate from bending down too far in the future. In some cases, the cooking plate bulges upwards in the centre instead. If this occurs, please contact your dealer.2.2 OFYR® REMOVING FACTORY OIL FROM THE COOKING PLATEFor its first use, thoroughly heat up the cooking plate, drizzle on some olive oil and spread the oil over the plate with a kitchen towel. If the plate is not properly heated when the oil is added, a sticky black substance will come off the plate instead, which is not easy to remove. Drizzle on the olive oil for 2-3 times, then scrape down the cooking plate with the spatula and push the scrapings into the fire. Once you only scrape off beige scrapings, the cooking plate is clean and ready to use.2.3 OFYR® COOKING OILSIt is recommended to use olive oil the first 2-3 times that you cook with OFYR. Olive oil has a lower combustion point, which will help give the cooking plate a nice brown-black hue. After the first couple of uses, you can start using oils with a higher combustion point, such as sunflower oil or groundnut oil.2. USEDue to the considerable weight of the elements, always unpack and place the OFYR® PlateExtension Set XL with at least 2 people.It is recommended to wear gloves when placing the Cooking Plate on top of the Grill StandPlace the plate halfway on the stand, then pull it over the cooking unit from one side untilit slides into place.To prevent marks, blurs or damage on the edges of the steel cooking plate, do not roll theplate during transport or while moving to store it. If blurs do appear, the top of the platecan no longer be scraped clean properly with a spatula.The use of pure alcohol, petrol or other chemical substances when lighting or re-lighting firesis very dangerous and may affect the food on the cooking plate. Only use firelighters thatcomply with EN 1860-3.Never leave your OFYR® Cooking Unit and OFYR® Plate Extension Set XL unattended during use.Keep children and pets away from your OFYR® Cooking Unit and OFYR® Plate ExtensionSet XL during and after use, especially when the units and parts are still warm.Be careful when using tropical hardwood, as it becomes very hot. When using too much ofthis type of wood, the cooking plate might become warped.In periods of disuse, it is recommended to treat the Cooking Plate with oil every 15-30 days.The amount of corrosion depends on the climate and humidity. You can use a spray bottlewith pan coating to treat the plate most efficiently.A smooth layer of carbon residue can build up on the cooking plate. This layer canoccasionally start to chip or flake at certain spots. If that’s the case, scrape off these spotsand oil the cooking plate. The carbon residue layer will then gradually renew itself.The Grill Stand and Cooking Plate can get very hot during use. Only move them using heatresistant gloves like the OFYR Gloves.When removing the OFYR® Plate Extension Set XL while the parts are still hot, make sureto only place them on a heatproof surface.The various parts of the OFYR Plate Extension Set XL will most likely be greasy after use.When the greasy parts are placed on stone and wooden surface, they will likely leavepermanent stains.After use, the various parts should be cleaned and oiled.Store the OFYR® Plate Extension Set XL in a dry place with low humidity to avoid corrosion.4. WARRANTY TERMS PER ELEMENTA limited lifetime guarantee applies to the materials and construction of all parts of the OFYR ® Plate Extension Set XL for the original buyers or owners, provided that they purchased their product from an authorised dealer and registered their warranty in the required manner through the OFYR Club at www.ofyr.club.This warranty covers manufacturing defects. It applies to the original buyers or owners of an OFYR ® Plate Extension Set XL provided that:• They purchased their product from an authorised dealer• They assembled, used and maintained the OFYR ® Plate Extension Set XL Set according to the instructions in this manual.NOT COVERED BY WARRANTY• Wear, corrosion, deformation and discolouration of parts exposed to fire.• Corrosion and discolouration caused by external influences.• Visual irregularities inherent to the manufacturing process.• Damages caused by not following our instructions and tips for safety, setup, intended use and maintenance.B2C B2B Cooking Plate5 years 3 year Grill Stand 2 years 1 yearFor further information, please contact one of our official distributors or dealers./store-locatorCopyright OFYR.All rights reserved.OFYR Global B.V.Gewenten 43A4704 RE RoosendaalNederland+31 (0)165 74 31 10*************。
Series 6, Built-in double oven MBA5785S6B 配件说明书
Series 6, Built-in double oven MBA5785S6BOptional accessoriesHEZ317000 Pizza pan, enamelledHEZ327000 Pizza stoneHEZ531000 Baking tray, enamelledHEZ531010 Baking tray, non-stick ceramic coated HEZ532000 Multipurpose pan, enamelledHEZ532010 Universal pan, non-stick ceramic coated HEZ538000 1fold telescopic rail, level independent HEZ634000 Baking and roasting grid (standard) HEZ664000 Baking and roasting grid (steam)HEZ915003 Glass roasting dish, 5,4 LHZ629070 Air Fry & Grill trayHZ638000 Full ext rails, level independent The built-in double oven with meatprobe and AutoPilot: automatically preparesyour dishes to the point of doneness you like.• Meatprobe: measures the optimal core temperature of the roast.• AutoPilot 30: Perfectly cooks dishes thanks to 30 pre-set automatic programmes.• Pop-out controls: Make the front of the oven easy to clean and give it a sleek look.• Cooking tips: Access food trends and cooking advice via the Home Connect app.• Home Connect takes the guesswork out of cooking new recipesTechnical DataInstallation type: ......................................................................Built-in Dimensions: ........................................................888 x 594 x 550 mm Dimensions of the packed product (HxWxD): .....960 x 660 x 690 mm Control Panel Material: ................................................Stainless steel Door Material: ............................................................................Glass Net weight: ..............................................................................60.0 kg Usable volume of cavity: ...............................................................71 l Cooking method: .......Defrost, Full width grill, Hotair gentle, Hot Air, Conventional heat, Pizza setting, low temperature cooking, Hot air grilling, warmingOven control: ......................................................................electronic Number of interior lights: .. (1)EAN code: (4242005185238)Energy efficiency rating: ....................................................................A Energy consumption per cycle conventional (2010/30/EC): .......1.02 kWh/cycleEnergy consumption per cycle forced air convection (2010/30/EC):0.81 kWh/cycleEnergy efficiency class (2010/30/EC) - cavity 2: ...............................B Energy consumption per cycle conventional - cavity 2 (2010/30/EC):0.83 kWh/cycleEnergy efficiency index (2010/30/EC): .....................................95.3 % Energy efficiency index cavity 2 (2010/30/EC): ......................120.3 % Connection rating: ..................................................................6300 W Fuse protection: ...........................................................................32 A Voltage: ...............................................................................220-240 V Frequency: .................................................................................50 Hz Plug type: ..........no plug (electrical connection by electrician), fixed connectionIncluded accessories: .............3 x combination grid, 1 x universal panSeries 6, Built-in double ovenMBA5785S6BThe built-in double oven with meatprobe and AutoPilot: automatically prepares your dishes to the point of doneness you like.Design- LCD-display control (white)- Interior halogen light, Light on/off when oven door opened/closed - Rotary dial, Retractable control dials, round- Straight bar handleFeatures- Home Connect ready- Electronic door lock- Control panel lock Automatic safety switch off Residual heat indicator Door contact switch- Digital temperature display with proposal- Automatic start Heating-up indicator AutoPilot Temperature probe - Electronic clock timerTop oven additional features- Cavity volume: 34 litre capacity- Full glass inner door- Cavity (inner surface) top: Enamel grey- Door hinge small cavity: Drop down oven doorMain oven additional features- Pyrolytic Cleaning in top oven- Cavity volume: 71 litre capacity- Full glass inner door- AutoPilot, 30- Single-point meat probe- 5 shelf positions- Door hinge big cavity: Drop down doorTop oven- Oven with 4 heating methods: conventional top/bottom heat, Large-area grill, Small area grill, bottom heat- Temperature range 30 °C - 275 °CMain oven- Oven with 9 heating methods: 3D Hotair, conventional top and bottom heat, Hotair grilling, full width variable grill, pizza function, low temperature cooking, defrost, keep warm, Hotair gentle- Temperature range 30 °C - 275 °C- Fast pre-heating functionCleaning- Pyrolytic self-cleaning functionAccessories- 3 x combination grid, 1 x universal pan- 1 set of level independent telescopic rails, Stop function Performance/technical information- Energy efficiency rating (acc. EU Nr. 65/2014): B(at a range of energy efficiency classes from A+++ to D)- Energy consumption per cycle in conventional mode:0.83 kwh- Number of cavities: Top Cavity Heat source: electrical- Energy efficiency rating (acc. EU Nr. 65/2014): B(at a range of energy efficiency classes from A+++ to D)- Energy consumption per cycle in conventional mode:0.83 kWh- Energy consumption per cycle in fan-forced convection mode:0.81 kwh- Number of cavities: Main Cavity Heat source: electrical- Total connected load electric: 6.3 KW- Nominal voltage: 220 - 240 V- Appliance dimension (hxwxd): 888 mm x 594 mm x 550 mm- Niche dimension (hxwxd): 875 mm - 888 mm x 560 mm - 568 mm x 550 mm- Please refer to the dimensions provided in the installation manualSeries 6, Built-in double oven MBA5785S6B。
索尼KDL-52XBR9 52英寸BRAVIA XBR系列LED电视产品介绍说明书
Key Features16:9 Full HD 1080p Resolution Panel (1920x1080)BRAVIA Engine™ 3 fully digital video processor Motionflow™ 240HzLive Color Creation™ technology w/ WCG-CCFL backlight BRAVIA® Internet Video /Widgets 1 USB to view photo/music/video7 HD inputs (HDMI™ x4, Component x2, PC Input x1) XMB™ w/ enhanced 3D Favorites Menu x.v.Color™/Deep ColorEthernet x1 w/ DLNA photo/music/video player BRAVIA Sync™® 2 BRAVIA Link ready (DVD, Input, Wireless)® 24p True CinemaExceeds Energy Star 3.0 Requirements by more than 15%® Key Technologies16:9 Full HD 1080p Resolution Panel (1920x1080) 16:9 Full HD 1080p resolution panel (1920x1080)accepts any high definition video signal and renders it with optimum resolution, so you can take fulladvantage of Blu-ray Disc™ players and Sony PLAYSTATION 3 entertainment systems that can deliver 1080p content® ® Motionflow™ 240Hz technology Motionflow™ 240Hz technology is Sony’s highest level of motion detail and clarity so you enjoy exceptional motion detail in sports, movies and games. Motionflow 240Hz technology quadruples the frame rate, resulting in a crisp fluid motion and a natural, realistic viewing experience.BRAVIA™ Internet Video With BRAVIA Internet Video you can enjoy one of the largest collectionsof premium and free on-demand entertainment directly to your HDTV. Use your in-home broadband connection and the BRAVIA HDTV remote control to access online video, music, and more content from over 20 providers including Amazon Video On Demand, YouTube™, Sports Illustrated, Sony Pictures, Sony Music,Slacker, and .4 4Personalize your HDTV with BRAVIA widgets Personalize your viewing experience by selecting,positioning, and resizing widgets on your BRAVIA HDTV display. BRAVIA Internet Widgets are small applications that can be accessed with the touch of one button providing you with the latest in news, weather, stock info, and much more right on your BRAVIA XBR9-Series.® BRAVIA Engine™ 3 fully digital video processor BRAVIA Engine 3 is the newest fully digital videoprocessor from Sony®. It uses a collection of enhanced algorithms to significantly reduce noise,enhance overall image detail, and optimize contrast so every scene produces sharp, vibrant, life-like images.Live Color Creation™ technology w/ WCG-CCFL backlight Live Color Creation technology workswith the BRAVIA XBR9-Series' WCG-CCFL (Wide Color Gamut - Cold Cathode Fluorescent Lamp)backlight to achieve wide color reproduction for more natural and vibrant colors. The technology combines advanced chroma signal processing with enhanced filters and purer light to reproduce 105 percent of the NTSC (National Television System Committee) color standard. This means deeper reds and greens with overall color that's truer and more life-like.Sony Electronics Inc. • 16530 Via Esprillo • S an Diego, CA 92127 • 1.800.222.7669 • w Last Updated: 04/15/2009Please visit the Dealer Network for currentinformation at /dnFeaturesGeneralClosed Captions (CC): Analog, DigitalOn-Screen Display: 3D XMBIlluminated Sony Logo: YesFinish (Surface Color): Blue Gray MetallicSupports Rear Mounting of DMeX™ Module: Yes BRAVIA® Link Module support: DMX-SW1, DMX-DVD, DMX-WL1DisplayBacklight Type: WCG-CCFL Display Device: LCDVideoVideo Processing: BRAVIA Engine 3™ TechnologyCineMotion® Reverse 3:2 Pulldown Technology: Yes Game Mode: YesWide Mode: Wide Zoom, Normal, Full (Full1-2 for PC), H Stretch, Zoom Deep Color: Yes 3D Comb Filter: YesPhotoTV HD: Yes (HDMI™ / Component) MPEG Noise Reduction: YesLive Color Creation™ Technology: YesAuto Wide: Yes4:3 Default: Yes24p True Cinema™ Technology: Yes x.v.Color™ Technology: YesPicture Mode: Vivid, Standard, Custom, Cinema, Sports, Game, Graphics, Photo-Vivid, Photo-Stardard, Photo-Original, Photo-CustomAdvanced Contrast Enhancer (ACE): Yes Motionflow™ Technology: 240 HzAudioDigital Amplifier: S-Master Digital Amplifier Voice Zoom: YesAuto SAP: YesAuto Mute (on no signal): YesSteady Sound® Automatic Volume Control: Yes Audio Out: Variable/FixedSony Original Surround: S-Force Stereo System: MTS Dolby®: Dolby DigitalAlternate Audio (Digital): YesSurround Effect: Sports, Music, Cinema, GameSound Booster: Yes5.1 Channel Audio Out: YesSound Mode: Dynamic, Standard, Clear Voice, Custom 5.1ch Through Out (Handycam): Yes Sound Enhancer: YesConvenienceChannel Jump: YesFavorite Channel: YesMultiple Language Display: English, French, Spanish Info Banner: TV Guide on Screen, PSIP, XDS Sleep Timer: YesInput Skip: AutomaticChannel Surf: YesChannel Block (with password): Yes Edit Channel Labels: Yes Label Inputs: Yes ID-1 Detection: YesOn/Off Timer: YesUSB Application(s): Music Player (mp3), Photo Viewer (jpeg), Video Player (mpeg2 TS) Theatre Mode (Theatre Button): YesShow/Hide Channels: Yes BRAVIA® Sync™: Yes Parental Control: YesBRAVIA® Sync™ Menu Button: Yes (on Remote Control) On-Screen Display for External Input: YesChannel Labels: Yes Program Block: YesAuto Photo Mode: Yes (DLNA, USB) On-Screen Clock: YesPicture Adjustments Lock: Yes White Balance: RGB Gain/BiasAuto Picture Setting w/HDMI™: Game, Graphics, Photo, Cinema Internet Radio: YesScene Select: Cinema, Sports, Photo, Music, Game, Graphics, General, Auto Theatre Mode with Cinema Surround: YesStart Up BRAVIA® Logo Display: Yes Favorites Menu: GraphicNew Theatre Mode with surround: YesTV Guide On-Screen: Yes (Gemstar ver.10)NetworkDLNA: Client (Photo), Client (Music), Client (Video) BRAVIA® Internet Video: Yes BRAVIA® Internet Widgets: YesSpecificationsDisplayViewing Angle (Right/Left): 178 (89/89) Viewing Angle (Up/Down): 178 (89/89)On-screen Contrast Ratio: 3,800:1 (typ) Dynamic Contrast Ratio: 100,000:1 (typ) Screen Size (measured diagonally): 52" Native Resolution: 1920 x 1080Display Resolution: 1920 x 1080p (Full HD) Panel Bit: 10-bitAspect Ratio: 16:9Color Range (u'v'): 102% of NTSC Color Range (xy): 91% of NTSCTV System Tuner (Cable): Clear QAMTuner (Terrestrial): ATSC Tuner, NTSC TunerChannel Coverage: VHF: 2-13 UHF: 14-69 CATV (analog): 1-135 CATV (digital) : 1-135 TV System (Analog): MNumber of Tuners (Analog): 1Number of Tuners (Digital): 1(Hybrid)TV System (Digital): ATSC Color System: NTSC 3.58VideoVideo Signal: 1080/60p (HDMI™ / COMPONENT), 1080/60i, 1080/24p (HDMI™ ONLY), 720/60p, 480/60p, 480/60iAudioAudio Power Output: 20W (10W+10W)Speakers (Total): 4Speaker Configuration: Invisible Speaker Box + TweeterInputs and OutputsAudio Out (Variable/Fixed): 1 (Rear)Component Video (Y/Pb/Pr ) Input(s): 2 (Rear) (1 fixed/1 selectable)Composite Video Input(s): 2 (1 Side/1 Rear - selectable) Digital Audio Output(s): Optical Digital Output - 1 (Rear)RF Connection Input(s): 1 (Rear) S-Video Input(s): 1 (Side)Analog Audio Input(s) (Total): 3 (1 Side/2 Rear) Audio Out: 1 (Rear)HDMI™ Connection(s) (Total): 4 (3 Side/1 Rear)PC In (D-Sub) + Audio In (Stereo Mini): 1 (Side) see owner's manual for supported timings USB 2.0: 1 (Side)HDMI™ PC Input: Yes (see owner's manual for supported timings) S-Video Detection: Yes AC Power Input: 1 (Rear)Ethernet Connection(s): 1 (Rear)Analog Audio Input(s) for HDMI™: 1 (Rear)USB 1.1: 1 (Rear) for Service onlyPowerPower Consumption (in Standby): Less than 0.1W (120VAC)Power Requirements (voltage): AC 120-240VPower Requirements (frequency): 50/60HzPower Consumption (in Operation) max.: 300 W (max)Regulation and Standard ComplianceVESA® Hole Spacing Compatible: Yes VESA® Hole Pitch: 300x300 M6Service and Warranty InformationLimited Warranty Term: 1 Year Labor / 1 Year Parts Online Instruction Manual (Reference Book): YesEnergy Saving & EfficiencyLightSensor™ Technology: YesPower Saving Modes: YesEnergy Star® compliant: Exceeds Energy Star Version 3.0 by more than 15% Eco Settings: YesDynamic Backlight Control: Yes Backlight Off Mode: YesPC Power Management: YesEstimated Annual Energy Consumption (kWh): 459 kWhrIdle TV Standby: YesPower Consumption (On Mode) for Energy Star: 251.0 W (Energy Star Version 3.0) Power Consumption (Standby Mode) for Energy Star: Less than 0.1W (120VAC)DimensionsWeight: 65.9 lbs. (29.9kg) with pedestal; 57.1 lbs. (25.9kg) without pedestalMeasurements: 49 x 32 3/8 x 14 1/8 in (1243 x 821 x358mm) with pedestal; 49 x 29 3/8 x 3 3/8 in (1243 x 745 x 85mm) without pedestalSupplied AccessoriesRemote Control RM-YD029 Batteries (Type AA x2)AC Power Cord (separate) Operating Instructions Quick Setup Guide Warranty CardTable Top Stand (attached)Optional AccessoriesSU-WL500 Wallmount Bracket UPC Code: 027*********1. Video quality and picture size will vary depending on your broadband connection speed (we recommend at least2.5Mbps and 10Mbps for HD content) and the content itself. Select content provided and subject to change.”2. Works with other BRAVIA® Sync™ or Theatre SyncTM labeled home audio/video products when connected via HDMI.3. Limited to resolutions supported by both the PC and the Sony TV. See Sony TV user's manual and PC documentation for the supported resolutions.4. See product specifications for power consumption details.5. Distance will vary depending upon environmental conditions.© 2009 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony, HDNA, BRAVIA, BRAVIA Engine, BRAVIA Sync, Cybershot, Handycam, Live ColorCreation, Motionflow, 24p True Cinema, Xross Media Bar, x.v.Color, and their respective logos are trademarks of Sony. PlayStation is a trademark of Sony Computer Entertainment Inc. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks of HDMI Licensing LLC. Energy Star and the Energy Star mark are registered U.S. marks. Blu-ray Disc is a trademark. TV Guide is a trademark of TV Guide Magazine Group, Inc. All other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice. Non-metric weights and measures are approximate.Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance ().。
MAG Codex 5 系列游戏桌面商品说明说明书
Rule your gaming empirewith minimalist styleMAG Codex 5 series gaming desktop is designed for entrygamers, features Intel latest processor and the latest NVIDIARTX series graphics card, providing the best gamingexperience. Exclusive thermal solution with the best aircooling, promise the longer system performance, RGB lightingeffect design with tempered glass, show off your personallygaming style, MSI MAG Codex 5 series will lead the players toconquer the wonderful battles.Selling PointsUp to Windows 10 Pro (MSI recommends Windows 10Pro for business.)Up to Intel Core i7-11700 processorUp to MSI GeForce® RTX 3070™ graphicsBest air flow design to keep them at peak performanceDual side panel optional, choose your personal styleMystic Light RGB LED design to customize yourGaming PCEasy to upgrade - designed to upgrade yourcomponents with an easeHigh speed M.2 SSD, loading game in secondStandard component inside, keeping the system in thelatest statusUSB 3.2 Gen 2 with type C reversible designPicture and logos System I/O-Ports1.1x Headphones / 1x Microphone1x USB 3.2 Gen 1 Type C / 2x USB 2.0 Type A2.3.1x HDMI out4.1x VGA port (D-sub)1x Display port out5.6.2x USB 2.0 Type A / 1x PS/2 combo port7.2x USB 3.2 Gen 1 Type A2x USB 2.0 Type A / 1x RJ45 (1G LAN)8.9.3x Audio jacksSpecificationOperating Systems Windows 11 HomeCPU Number Intel Core i7-11700FCPU Clock 2.5GHzCPU Cores8TDP65WCache N/AThreads N/ACPU Cooler Air cooling 65WChipsets H510VGA IO Port HDMIx1, Display Portx3VGA MKT Name GeForce RTX 3070 VENTUS 2X 8G LHR GPU1 VRAM Size8GMemory Size32GB(16GB*2)Memory Type DDR4 SDRAMMemory Speed1600(3200)MHzModule Type U-DIMMMemory Slot(Total)2Memory Slot(Free)0Max Capacity Max 64GBSSD Interface PCIe GEN3x4 NVMeSSD Form Factor M.2-2280 M-KEYSSD Config1TB*1SSD Size1TBHDD1 Interface SATA GEN3HDD1 Form Factor 3.5 inchHDD1 Size2TB*1HDD1 RPM7200RPMODD(Type)N/AODD Height N/AODD Type N/AM.2 slots(Total)1M.2 slots(Free)02.5" Drive Bays(Total)22.5" Drive Bays (Free)2LAN Intel I219-VWLAN INTEL/AX210.NGWG.NVWLAN Version802.11a/b/g/n/ac/ax 2x2+BTBT Version 5.2Audio Chipset Realtek ALC897Audio Type7.1 Channel HD AudioThunderbolt N/AUSB 2.0 Type A2USB 2.0 Type C NAUSB 3.2 Gen 1 Type A NAUSB 3.2 Gen 1 Type C1USB 3.2 Gen 2 Type A NAUSB 3.2 Gen 2 Type C NAUSB 3.2 Gen 2x2 Type C NAUSB 3.2 Gen 2x2 Type A NAAudio Mic-in1Audio Headphone-out1Audio Headphone-out (HiFiSPDIF)NAMic-inHeadphone-out combo NAUSB 3.2 Gen 2x2 Type C (R)NAUSB 3.2 Gen 2x2 Type A (R)NAUSB 3.2 Gen 2 Type C (R)NAUSB 3.2 Gen 2 Type A (R)NAUSB 3.2 Gen 1 Type C (R)NAUSB 3.2 Gen 1 Type A (R)2USB 2.0 Type C (R)NAUSB 2.0 Type A (R)4Thunderbolt (R)NARJ451WiFi Antenna NACard Reader NAVGA out1VR-Link NAHDMI out1x (v2.0)DP out1x (v1.4)mini DP in NAmini DP out NAPS21COM Port NADVI-D out NAAudio jack3SPDIF NAFlash BIOS Button NAPower500WPower Certification80PLUS BRONZEFormfactor ATXType POWER SUPPLYKeyboard Interface N/AMouse Interface N/APower Cord1AC Adaptor N/AWarranty Card1Quick Guide3User Manual N/AVESA Mount kit N/AKeyboard N/AMouse N/AOperating, Storage Temperature0° C ~ 35° C ; -20° C ~ 60° COperating, Storage Humidity0% ~ 85%;0% ~ 90%Regulatory Compliance FCC(Class B)CB/CEUL(CUL)BSMIVCCIRCM(C-Tick)Product Dimension (WxDxH) (mm)195mm x 514.8mm x 466mmProduct Dimension (WxDxH) (inch)195mm x 514.8mm x 466mmInside Carton Dimension (WxDxH) (mm)N/AInside Carton Dimension (WxDxH) (inch)N/A611 x 351 x 645Outer Carton Dimension Standard (WxDxH)(mm)Outer Carton Dimension Standard (WxDxH)24.06 x 13.82 x 25.39(inch)Weight (Net kg)TBDWeight (Gross kg)TBDLiter40LVESA size NAWarranty24monthsEntity MKT Name MAG Codex 5 11TD-1430EU-B71170F307832G2TS1TX11MAAH1 Color ID1/Black-Black-BlackEAN4719072975999。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
(Contact address for overseas customers in Jaril 2005
Appendix1-Rev1.1
Contact us
Attached-1
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office.
Please contact our sales offices for details ;
U.S.A / San Diego Atlanta Dallas Germany / Dusseldorf TEL : +1(858)625-3630 TEL : +1(770)754-5972 TEL : +1(972)312-8818 TEL : +49(2154)9210 FAX : +1(858)625-3670 FAX : +1(770)754-0691 FAX : +1(972)312-0330 FAX : +49(2154)921400 FAX : +44(1)908-282-528
Japan / (Internal Sales)
Tokyo Yokohama Nagoya Kyoto 2-1-1, Yaesu, Chuo-ku, Tokyo 104-0082 TEL : +81(3)5203-0321 FAX : +81(3)5203-0300 2-4-8, Shin Yokohama, Kohoku-ku, Yokohama, Kanagawa 222-8575 TEL : +81(45)476-2131 FAX : +81(45)476-2128 Dainagayo Building 9F 3-28-12, Meieki, Nakamura-ku, Nagoya,Aichi 450-0002 TEL : +81(52)581-8521 FAX : +81(52)561-2173 579-32 Higashi Shiokouji-cho, Karasuma Nishi-iru, Shiokoujidori, Shimogyo-ku, Kyoto 600-8216 TEL : +81(75)311-2121 FAX : +81(75)314-6559 TEL : +81(45)476-9270 FAX : +81(045)476-9271
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
TEL : +33(0)1 56 97 30 60 FAX : +33(0) 1 56 97 30 80 TEL : +852(2)740-6262 TEL : +86(21)6279-2727 TEL : +86(411)8230-8549 TEL : +86(10)8525-2483 TEL : +866(2)2500-6956 TEL : +82(2)8182-700 TEL : +65-6332-2322 TEL : +60(3)7958-8355 TEL : +63(2)807-6872 TEL : +66(2)254-4890 FAX : +852(2)375-8971 FAX : +86(21)6247-2066 FAX : +86(411)8230-8537 FAX : +86(10)8525-2489 FAX : +866(2)2503-2869 FAX : +82(2)8182-715 FAX : +65-6332-5662 FAX : +60(3)7958-8377 FAX : +63(2)809-1422 FAX : +66(2)256-6334