KALLER氮气弹簧

Our very latest Micro EO24TM Hose and Tube gas link system uses dual-sealed end connections and combines both flexibe hoses and pliable steel tubes into one modularly versatile, gas link system.

The Micro EO24TM gas link system replaces both our previous Micro-Hose TM and Micro-Tube TM sytems, although spare parts for these older systems will still be available for a limited time.

Similarly, the Micro EO24TM Tube system uses

compact (AF 10mm) Clamp Nut end connections that are soft sealed and self crimping, which also makes them both leak proof and vibration resistant.

The Micro EO24TM Hose system uses the same flexible hoses as our EZ-Hose system, but the compact (AF 10mm) crimped end connections are dual-sealed to ensure both leak proof and vibration resistant connections.

Micro EO24TM Control Block

(Contains 16x M6 connection ports)

Order No. 3023888 (without Rupture Screw)Order No. 3123888 (with Rupture Screw)

Micro EO24TM Hose

System

Micro EO24TM Tube

System

Micro EO24TM Hose System

End Connections

O-ring soft seal

24º conical metal seal

Micro EO24TM Tube System

End Connections

Micro EO24TM

Tube

Soft seal M6 Adapter

Clamp nut Crimp ring Micro EO24TM Tube (per 1m length)Order No. 504594

Clamp Nut

Order No. 504589

Micro EO24TM Hose

Order No. 4023500-XXXX

The ability to combine the two systems together makes the installation of a gas link system much easier for the end user. For example, very short lengths of tube can be cut if gas springs are spaced very close together, while the hose can be used if the location of the Control Block in the gas link system is tucked far away from where the gas springs are situated.

Tube Bending Tool (Bend radius 20mm)Order No. 504711

Please Note!

When cutting the Micro EO24TM Tube to length, it is important not to use a tube cutter that could collapse the end of the tube. Instead it is preffered that a hacksaw and deburring tool are used to ensure a clean cut is made.

Micro EO24TM Tube System Accessories

Micro EO24TM Hose and Tube System Adapters

Since the end connections on both the Micro EO24TM Hose and Tube systems have the same female M8x1 threads,they both share the same system adapters.

These adapters can be used to link:

gas spring to Micro EO24TM Hose,gas spring to Micro EO24TM Tube,

Micro EO24TM Hose to Micro EO24TM Hose,Micro EO24TM Hose to Micro EO24TM Tube,Micro EO24TM Tube to Micro EO24TM Tube,

Micro EO24TM Hose to Control Block/Distribution Block,Micro EO24TM Tube to Control Block/Distribution Block.

Tube Deburring Tool Order No. 505096

Micro EO24TM Hose and Tube Port Adapters

Micro EO24TM Hose and Tube Adapters

Two-way coupling (straight)

Order No. 504590Two-way coupling (90º elbow)

Order No. 504591

Three-way coupling Order No. 504592

Four-way coupling Order No. 504593

M8x1 (2x)

M8x1 (2x)

M8x1 (3x)

M8x1 (4x)

M6 straight adapter Order No. 4022057

G1/8” straight adapter Order No. 4022058

G1/4” straight adapter Order No. 4022063

One-way M6 adapter (90º elbow)

Order No. 4022059

Two-way M6 adapter Order No. 4022061

Two-way M6 adapter (90º elbow)

Order No. 4024092