明纬电源产品手册RFP-M1M3-3A-SPEC-CN

合集下载

明纬电源选型指南

抑制电路 ● 库存现货齐全 ● 交货期短 ● 效率高 ● 工作温度低 ● 105 0 C 输出电容器 ● 寿命长 ● 符合全球电压使用 ● 短路保护 ● 过载保护
主要应用
● LED 大屏 ● 工控设备 ● 通讯设备 ● 仪器仪表 ● OA 设备 ● 游艺机
正在开发型号
LSP-100
图 .S
图 .T
AC-DC 单组输出(例：OFM-5001 5V，1.00A）
功率输入
127 ╳ 76 ╳ 29
图 .P
PS-65.PD-65.PT-65
127 ╳ 76 ╳ 40
图 .Q
安装导轨
图 .R
AC-DC 三组输出
型号
功率输入 W 注 1 +3.3V +5V
T-30A
30 S
3
T-30B
30 S
3
T-40A
40 F
3
T-40B
40 F
3
T-40C
40 F
3
T-50A
50 S
功能注4 ABK ABK ABK ABK ABK ABK ABK AK AK AK AK AK ABK ABK ABK ABK ABK ABK
安全外形注5 图
B B UTE B UTE B UTE B C C C C UTE C UTE C UTE C UTE C UTE C E E UTE E UTE P UTE P UTE P UTE P UTE Q UTE Q UTE Q UTE Q UTE Q UTE UTE UTE UTE UTE
2.5
PD-25-12 25 F
1
2.5 1
AB UTE O AB UTE O

明纬LED显示屏专用电源产品介绍说明书

图片来源：2020February明纬[MEAN WELL]成立于1982年，为世界标准交换式电源供应器领导品牌制造商之一。

目前在全球设有共三座生产基地（台湾、广州花都区、苏州）及五家财务独立之关联企业（台湾、美国、欧州、广州与苏州）。

明纬产品包含：AC/DC交换式电源、DC/DC转换器、LED防水电源、适配器（Adaptor）、电池充电器（Charger）以及DC/AC逆变器（Inverter）。

目前已超过10000种标准电源机型，广泛应用于医疗、工业自动化、电子、通讯、LED照明等领域。

明纬累积近40年经验，产品已经大量并广泛地被使用在LED显示屏,同时因其产品具备高信赖性及最佳性价比等特点，在客户端已经取得良好的品牌声誉及市场占有率。

多年来更致力于研发绿色节能电源产品。

美国明纬1研发团队不断精益求精，陆续推出新一代150~500W LED显示屏电源解决方案，电源均采用薄型化设计,可使得显示屏单元箱体设计更趋薄型和轻量化，便于运送安装；全系列产品更采用高效率节能线路设计，能有效降低电能耗用。

除提供单组及双组等多种机型选择之外，产品并符合UL、CUL、TUV、CCC、CB、CE等多项国际安规与电磁兼容测试标准与认证，适合于室内外LED电子广告牌、LED显示屏、小间距显示屏、LED字幕机以及LED电视墙等应用。

具备近40年的标准电源产品研发及制造经验，明纬公司拥有12大产品线，超过10000种标准电源产品，为客户提供【一站式】电源解决方案。

每一款产品从技术研发、设计、试作、设计验证(DVT)、设计品质测试(DQT)、选料、试产、认证、量产等，均通过严谨的设计与生产及品质管控程序与测试验证规范标准。

明纬在全球拥有200多家备库存之经销商，产品透过全球80多个国家地区。

样品于24小时内即可迅速提供，且没有最小订购量限制。

若您正在寻找高信赖度，品质稳定，价格合理、产品系列齐全的电源供应商，拥有最完整解决方案的明纬公司将是您的首选!苏州明纬台湾明纬广州明纬天河研发中心广州明纬花都产业园23ISO14000证书ISO9001证书ISO45001证书[MEAN WELL]的品牌意涵为[善意的标志，品质的执着]。

PMM人工电源网络商品说明书

The AMN - Artificial Mains Network, also known as LISN - Line Impedance Stabilization Network is the ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under T est) may inject into the power line or mains.This is obtained by providing well known impedance value and phase response across the frequency range of the test.L1-150M and L1-150M1 are a single-path LISN (Line Impedance Stabilization Network) designed to be easily used for conducted disturbances measurements according to different standards for Automotive and ISM (Industrial, Scientific, Medical) applications.Selecting the standard is as fast as the turn of a rotary switch located on the rear panel.PMM Artificial Mains Networks provide robust and stable m echanical construction, high quality electric components, easy and perfect grounding, solid input and output power connections. They can be used in conjunction with any EMI receiver or spectrum analyzer and offer features required for safe, repeatable and accurate measurements.Multi-standard Single-path LISNProvided Features•Powering the EUT•EUT termination to a standardizedimpedance respect to the reference ground •Coupling the measuring receiver to the disturbance generated by the EUT•Decoupling the measuring receiver from unwanted RF signals from the power lineMain Features•L1-150M: 100 kHz to 200 MHz frequency range •L1-150M1: 10 kHz to 400 MHz frequency range •Multi standard design •150 A max output current •Suitable also for DC lines•Large baseplate for optimal grounding •Robust, compact construction •Screw terminals for safe wiring•Meets the requirements of several standards including CISPR 16-1-2, CISPR 25, ISO 11452-2/4/5,ISO 7637-2, MIL-STD-461F, DO-160, ED-14GProvided by: (800)404-ATECAdvanced Test Equipment Rentals®Frequency range Continuous rated output currentMax. output current @ 45 °C Max. permissible operating voltagesEUT supply frequency range Equivalent circuit RF output connector EUT connectionLine input connection Ground connectionOperating temperature Storage temperature Dimensions (W x H x D)WeightReceiversLISNRFI Filters• 7010/00: EMI receiver 150 kHz to 1 GHz • 7010/01: EMI receiver 9 kHz to 1 GHz • 7010/02: EMI receiver 9 kHz to 30 MHz • 7010/03: EMI receiver 9 kHz to 3 GHz • 9010: EMI receiver 10 Hz to 30 MHz • 9010F: EMI receiver 10 Hz to 30 MHz• 9010/03P: EMI receiver 10 Hz to 300 MHz • 9010/30P: EMI receiver 10 Hz to 3 GHz •9010/60P: EMI receiver 10 Hz to 6 GHz• L2-16B: single phase AMN, 16 A • L3-32: 4 lines, 3-phase AMN, 32 A • L3-64: 4 lines, 3-phase AMN, 63 A• L3-64/690: 4 lines, 3-phase AMN, 63 A • L3-100: 4 lines, 3-phase AMN, 100 A • L3-500: 4 lines, 3-phase AMN, 500 A • L1-500: single phase AMN, 500 A•L2-D: Delta LISN for telecom, 2 A, 150 Ω• FIL-L2-16F: single phase RFI filter, 16 A • FIL-L2-24M: single phase RFI filter, 24 A • FIL-L3-32M: 3-phase+neutral RFI filter, 32 A •FIL-L3-70M: 3-phase+neutral RFI filter, 70 A100 kHz to 200 MHz L1-150M, L1-150M1Multi-standard Single-path LISNOrdering Information:L1-150M - L1-150M1 Artificial NetworkIncludes: Operating Manual, RF Cable, N-BNC adapter, Calibration CertificateOptional accessories:SBRF4: RF switching boxAutomatic (in conjunction with PMM receivers) andmanual switching of up to four single-path AMN. Internal 50 Ohm terminations and switchable 150 kHz high-pass filter. Low insertion loss.Max. operating frequency: 108 MHz.L 1150-F E N -40704 - S p e c i fi c a t i o n s s u b j e c t t o c h a n g e s w i t h o u t p r i o r n o t i c eSPECIFICATIONSRelated Products•Electrical safety and presence of ground protection relays do require the installation of properly rated insulating transformer(s) between mains power line and AMN line inputs.•High mains noise may require the installation of properly rated mains filters to reduce the level of unwanted signals.Sales Office:Via Leonardo da Vinci, 21/2320090 Segrate (Milano) - ITALY Phone: +39 02 2699871Fax: +39 02 26998700E-Mail:**************************Internet: www.narda-sts.itHeadquarter:Via Benessea, 29/B17035 Cisano sul Neva (SV) - ITALY Phone: +39 0182 58641Fax: +39 0182 586400L1-150ML1-150M110 kHz to 400 MHz100 A150 A 600 Vdc 300 Vac DC to 440 Hz (5 μH+0/1 Ω)//50 Ω N female, 50 Ω Screw terminal M10 Screw terminal M10 2x Screw terminal M10-10 to +45 °C -25 to +70 °C 230 x 105 x 410 mm5 kg。

2014明纬开关电源手册

25
Environment HLG-150H, HLG-185H, HLG-240H
26
HLG-320H
27
MDR-10 / 20 / 40 / 60 / 100
28
DR-15, DR-30, DR-60, DR-100
29
DR-45, DR-75, DR-120,
30
DIN Series
DRP-240, DRP-480, DRP-480S DRH-120, DRT-240/480/960
2013
April
Introduction
Green Enterprises, Green Products
EXCELLENCE
TAIWAN
SUPERIOR BRANDS
E stablished in 1982, MEAN WELL is a leading standard switching power supply manufacturer in the world. During the past 30 years, our slogan “your reliable power partner” has been curved into the minds of all MEAN WELL employees and put into effect thoroughly between MEAN WELL and our valuable customers. Sure-footedly nurtured the core competency of P, Q, C, D, S, R (Product, Quality, Cost, Delivery, Service, and Reliable Relationship), we made every effort to accomplish the one stop shopping environment with the most complete standard power product lines.

明纬逆变电源样本

明纬逆变电源样本
样本一：MW-5000系列逆变电源
MW-5000系列逆变电源采用先进的大功率IGBT逆变技术，适用于中
小型交流电源需求。

该系列逆变电源具有高效稳定的输出性能，峰值功率
达到额定功率的130%，能够满足高峰值负载的需求。

同时，该系列逆变
电源具有智能控制和保护功能，可以实现远程监控和控制。

它还具有过载、过热、短路等多重保护功能，确保设备的安全运行。

此外，MW-5000系列
逆变电源还具有高效的能源利用率，能够降低设备的运行成本。

样本二：MW-8000系列逆变电源
MW-8000系列逆变电源是一种高端产品，适用于大功率交流电源需求。

该系列逆变电源采用高效的DSP控制器和大功率IGBT模块，具有出色的
性能和可靠性。

它具有高精度输出电压和频率的稳定性，能够满足对输出
信号质量要求较高的应用场景。

MW-8000系列逆变电源还具有丰富的通信
接口和智能控制功能，支持远程监控和控制。

此外，该系列逆变电源还具
有多重保护功能，如过载保护、过温保护、短路保护等，保障设备的安全
运行。

MW-8000系列逆变电源广泛应用于电信、工矿、交通、医疗等领域。

以上是几款明纬逆变电源的样本介绍，它们具有先进的技术和可靠的
性能，广泛适用于各种领域的电力供应需求。

无论是中小型、大功率还是
超高功率设备，明纬逆变电源都能够提供稳定可靠的交流电源，为设备的
正常运行提供强有力的支持。

台湾明纬开关电源选型手册

外形尺寸安全
(mm)
注5
58 ╳ 45 ╳ 21 UTE
65 ╳ 45 ╳ 21 UTE
70 ╳ 48 ╳ 21 UTE
89 ╳ 51 ╳ 21 UTE
102 ╳ 66 ╳ 23 UTE
单组输出附加充电功能
型号
AD-55A AD-55B AD-155A AD-155B AD-155C
功率输入
DC 输出电流(A)
15 S
3
1.3
0.7
AK
A
图:A
S-25-
25 F
5
S-35-
35 S
7
2.1
1.7 1.1
3
2.4 1.5
ABHK AHK
UTE A B
S-40-
40 F
8
3.5
2.8 1.8
ABHK UTE B
S-50-
50 S
10
4.2
3.4 2.1
AHK
C
S-60-
60 F
12
5
4 2.5
ABHK UTE C
7
T-50B
50 S
5
T-50C
50 S
4
T-50D
50 S
3
T-60A
60 F
5
T-60B
60 F
5
T-60C
60 F
5
IT-60D 60 F
3
IT-60F 100 F
3
T-100C 100 S
10
T-100D 100 S
6
T-115 100 F 12 10
PT-45A 45 F
3
PT-45B 45 F

明纬LED电源安装手册说明书

●Type：LED Power Supply（Families：AP, CEN, CLG, ELG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LP, LPF, PLC, NPF, OWA, PCD, PLC, PLD, PLM, PLN, PLP, PWM, ULP）●IntroductionThe LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.Mean Well’s LED power supplies include metal case, plastic case, and PCB types.●Installation（1）Before commencing any installation or maintenance work, please disconnect the power supply from the utility.Ensure that it cannot be re-connected inadvertently!（2）Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be kept when the adjacent device is a heat source.（3）Mounting orientations other than standard orientation or operate under high ambient temperature may increase the internal component temperature and will require a de-rating in output current. Please refer to the specification sheet to receive the optimum mounting position and information about the de-rating curve.（4）Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit.Please refer to its specification.（5）For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighting fixture is tight so that water cannot intrude into the system.（6）For dimmable LED power supplies, make sure that your dimming controller is capable of driving these units. For ELN series, either “D” or “P” type, require40mA each unit; for those with “3 in 1” dimming function, e.g. HLG and LPF series, require 0.15mA each unit.（7（a）Connect the FG wire (green or green/yellow) of the LED power supply to PE (green or green/yellow), this step can be skipped when the unit is marked class II, ungrounded.（b）Connect the ACL wire (black or brown) of the LED power supply to Live (black or brown).（c）Connect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).（8）The maximum number of the LED PSUs that can be connected to a circuit breaker at 230V is shown as below.Note: These calculated values are based on MCB S200 series manufactured by ABB except for HVG/HVGC series, which are calculated by using MCB S260 series of the same manufacturer.（9）For other information about the products, please refer to for details.Warning / Caution !!（1）Risk of electrical shock and energy hazard. All failure should be examined by a qualified technician. Please do not remove the case of the power supply by yourself!（2）Risk of irreparable damage. LED power supplies with IP64 to IP66 rating must be located indoors or in a location where these units can be sheltered from the rain if outdoors.（3）Please do not install LED power supplies in places with high ambient temperature or close to fire source.Please refer to the specifications about the maximum ambient temperature limitations.（4）Output current and output wattage must not exceed the rated values on the specifications.（5）The FG ( ) must be well connected to PE(protective earth) if the unit equips with it.（6）All MW’s PSUs are designed in accordance with EMC regulations and the related test reports are available by request. Since they are belong to component power supplies and will be installed inside system enclosure, when they are integrated into a system, the EMC characteristics of the end system must be re-verified again. Manufacturer：MEAN WELL ENTERPRISES Co., LTD.No.28, Wuquan 3rd Rd., Wugu Dist.,New Taipei City 24891, TaiwanTel: +886-2-2299-6100Web: Branch Office：ChinaMEAN WELL (GUANGZHOU) ENTERPRISES Co., LTD.2F, A Building, Yuean lndustry Park, Huangcun,Dongpu Yown, Tianhe District, Gungzhou, ChinaPost Code:510660Tel: +86-20-2887-1200Web: U.S.A.MEAN WELL USA, INC.44030 Fremont Blvd., Fremont,CA 94538, U.S.A.Tel: +1-510-683-8886Web: EuropeMEAN WELL EUROPE B.V.Langs de Werf 8, 1185XTAmstelveen, The NetherlandsTel: +31-20-758-6000Web: www.meanwell.euDeclaration of China RoHS ConformityIn order to reduce the impacts on the environment and take the more responsibility for protecting the earth, MEAN WELL is confirming and announcing the conformity to China RoHS, an Administrative Measures for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products.Environment Friendly Use Period LabelNames and Contents of Hazardous Substances Lists。

明纬电源型号分类

AC/DC-机壳型交换式电源供应器G3系列基础数据功率: 15-150W输出:1 2 3 4说明: ﹡小型化﹡高信赖度,可承受5G震动与70℃高工作环温,全机使用105℃高寿命电解电容,可承受300VAC突波输入达5秒﹡适合使用于较严苛的工作环境型号: RS-15RS-25RS-35RS-50RS-75RS-100RS-150 RD-35RD-50RD-65RD-85RD-125RID-50RI D-65RID-85RID-125RT-50RT-65RT-85RT-12 5RQ-50RQ-65RQ-85RQ-125NE系列基础数据功率: 15-150W输出:1 2 3说明: * 小型化,具备完整保护功能* 最经济的低瓦数安规符合机型系列型号NES-15NES-25NES-35NES-50NES-75NES-100 NES-150NED-35NED-50NED-75NED-100NET-35: NET-50NET-75NES-200NES-350G2系列基础数据功率: 25-1000W输出:1 2 3 4说明: * 200W以上机型不具备CE(S-240除外)* 15年以上市场销售之常青安规机型,现正有数百万台各式机种应用于各类型终端设备中型号: S-25S-40S-60S-100F S-150S-210S-250S -320D-60ID-60T-60IT-60Q-60IQ-60D-1 20T-120Q-120Q-250T-40SE-200SE-350S E-450SE-600SE-1000SE-1500SC-150G1系列基础数据功率: 15-350W输出:1 2 3说明: * 最低价系列机型,适合高度竞争的终端应用场合* 20年以上市场销售之常青机型,现正有数百万台各式机种应用于各类型终端设备中* 无安规认证型号: S-15S-35S-50S-100S-145S-201S-350D -30ID-30T-30D-50ID-50T-50PFC系列基础数据功率: 75-750W输出:1 3 4说明: * 建主动式功率因子矫正功能(active PFC) * 全围电压输入,功能完整型号: SP-75SP-100SP-150SP-200SP-320SP-480SP -500SP-750SP-240USP-225USP-350USP-150 USP-500TP-100QP-100TP-150QP-150QP-200 QP-375QP-320TP-75PSP-500PSP-600RSP-1000 RSP-1500RSP-2000RSP-2400RSP-3000HSP-150 HSP-250HRP-75HRP-300HRPG-300HRP-150HR PG-150HRP-600HRPG-600SPV-150SPV-300SPV-1 500HRP-200HRPG-200DIN系列基础数据功率: 10-960W输出:1说明: * 无风扇设计* 240W以上机型建功率因子矫正(PFC)功能* 适合安装于 DIN rail TS35 / 7.5 或 15* 除一般机型外，另有高电压单相/三相 340~550VAC 输入围机种* 另有冗余模块(Redundant), DC UPS 模块等系列机型型号: MDR-10MDR-20MDR-40MDR-60MDR-100DR-15D R-30DR-60DR-100DR-45DR-75DR-120DRP-24 0DRP-480DRP-480S DRH-120DRT-240DRT-480 DRT-960WDR-120WDR-240WDR-480DR-UPS40DR-R DN20SDR系列基础数据功率: 240-480W 输出: 1说明: * 薄型设计,电能转换效率高达94%* 建主动式功率因子矫正功能(active PFC) * 适合安装于 DIN rail TS35 / 7.5 或 15 * 建DC OK继电器接点(Relay contact)* 可承受150%峰值负载* 并联功能,最高可达4台(SDR-480)型号: SDR-120SDR-240SDR-480AD 系列基础数据功率: 55-155W 输出: 1 2 说明: * 备援电池充放电控制与 UPS 功能(需外接铅酸电池)* 适合用于安全监控设备或各式电池备援系统型号: ADS-55 AD-55 ADD-55 ADS-155 AD-155 ADD-155 SCP-35 PSC-60 PSC-100 SCP-50 SCP-75LP 系列基础数据功率: 18-60W 输出: 1说明: * IP66防护等级设计* 经济型系列* 可承受300VAC 突波输入达5秒* -30~70℃宽工作环温围* 适合于LED 照明或LED 电子广告牌相关运用型号: LPL-18 LPH-18 LPC-20 LPV-20 LPC-35 LPV-35 LPC-60 LPV-60 LPV-100 LPLC-18 LPHC-18ELN 系列基础数据功率: 30-60W 输出: 1说明: * 塑料外壳, IP64防护等级* 可选购调光(dimming)功能 : 可接受控制讯号1~10VDC(D型)或PWM(P 型)* 设计符合UL1310 Class 2* 使用者可调整输出电压与电流* 适合于LED 照明或LED 电子广告牌相关运用型号: PLP-60 ULP-150 PLC-60 PLC-100 PLP-45 PLP-20 PLP-30 ELN-60 ELN-30 PLC-30 PLC-45PLN 系列基础数据功率: 30-96W 输出: 1说明: * 塑料外壳, IP64防护等级* 建主动式功率因子矫正功能(active PFC)* UL1310 Class 2电源* 使用者可调整输出电压与电流* 适合于LED 照明或LED 电子广告牌相关运用型号: PLN-20 PLN-100 PLN-60 PLN-30 PLN-45CLG 系列基础数据功率: 60-200W 输出:1说明: * 金属外壳, IP65/67防护等级* 建主动式功率因子矫正功能(active PFC)* 使用者可由控制电缆或部可变电阻调整输出电流(CLG-150/200)* 适合于LED 照明或LED 电子广告牌相关运用型号: CLG-60CLG-100CLG-150CLG-200HLG-40H HLG-60 H HLG-80H HLG-100HLG-100H HLG-120HLG-120HHLG-150H HLG-150HLG-185HLG-185H HLG-240HLG -240H HLG-320HCEN系列基础数据功率: 60-96W 输出: 1说明: * 金属外壳，IP66防护等级* 建主动式功率因子矫正功能(active PFC) * 使用者可弹性调整输出电压与电流* 适合于LED路灯及户外照明相关运用型号: CEN-60CEN-75CEN-100模块式基础数据功率: 450-1000W 输出: 1～14说明: * 可弹性搭配之组合式电源, 客制化的标准品解决方案* 输出电压可涵盖1.6~53V各种电压* 建主动式功率因子矫正功能(active PFC)* 适合于需多输出电源之应用,尤其为复杂之机器设备或系统型号: MP-450MP-650MP-1K0MS-75MS-150MS-300 MD-10019“机箱式基础数据功率: 1000-8000W 输出: 1～8说明: * 19" 1U 或2U 机箱式电源* RCP-MU: 监控模块(建I2C 译码器)* RCP-2U: 客制化2U 机箱式电源, 最高可达4500W 与8输出型号: RCP-1000 RCP-MU RCP-2U RCP-1UAC/DC-基板型交换式电源供应器板上型基础数据功率: 5-20W 输出: 1说明: * 安装于终端设备之主PCB 上* 符合医疗等级安规认证* NFM - 机板型; PM - 模块型型号: PM-05 PM-10 PM-15 NFM-05 NFM-10 NFM-15 PM-20 NFM-20泛用基板型基础数据功率: 5-320W 输出:1 2 3 4说明: * PCB 式,小瓦数机型无PFC* 多种常见尺寸以符合各类型应用: 7"*4.25", 5"*3", 4"*2", 细长型型号PS-05 PS-15 PS-25 PD-25 PS-35 PS-45 PD-45: PT-45PT-4503PT-6503PS-65PD-65PT-65RPD-65RPT-65PD-110PQ-100PPQ-100PPS-200PPS-125PID-250ASP-150PPT-125LPS-50LPS-75LPS-100LPP-100LPP-150ELP-75医疗用基板型基础数据功率: 30-200W输出:1 2 3 4说明: * PCB式,小瓦数机型无PFC* 符合医疗等级安规认证* 低泄漏电流,适合用于非病患接触式医疗设备型号: MPS-30MPS-45MPD-45MPT-45RPS-60RPD-60R PT-60MPS-65MPD-65MPT-65RPS-75RPD-75RP T-75RPS-160RPD-160RPT-160MPS-120MPD-120 MPT-120MPQ-120MPS-200MPD-200MPT-200MP Q-200AC/DC-外接式交换式电源供应器电池充电器基础数据功率: 30-1000W输出:1说* 150W以上机种CE宣告仅限具备PFC功能者明: * 适用于电池备援系统,电动轮椅,休旅拖车,或ㄧ般消费性电子设备型号: GC30B GC30U GC30E PA-120 PB-120 PS-120 ESC-120 ESP-120 ESC-240 ESP-240 PB-300 PB-360 P B-1000 GC-200 PB-600 GC120 PB-230桌上型适配器基础数据功率: 15-120W 输出: 1 3说明: * 桌上型,具备世界各主要国家/地区之安规认证* 需另购AC 电源线(依不同国家/地区有所差异)* DC 输出头可修改更换(有最小订购量限制)型号: GS90A GS60A GS40A P50A P25B P25A GS25B GS25A GS18B GS18A GS15B GS15A GS220 GS160GS120医疗用桌上型适配器基础数据功率: 30-50W 输出: 1说明: * 桌上型,符合医疗等级安规认证* 需另购AC 电源线(依不同国家/地区有所差异)* DC 输出头可修改更换(有最小订购量限制)型号: MES50A MES30C MES30B MES30A插壁式适配器基础数据功6-25W 输 1率: 出:说明: * 插墙式设计,具备世界各主要国家/地区之安规认证* DC 输出头可修改更换型号: GS25E GS25U GS18E GS18U GS15E GS15U GS12EGS12U GS06E GS06U GE12 GE18 GE24AC/DC-特殊用途游戏机电源基础数据功率: 104-104W 输出: 3说明: * 适合于多类型之电子游戏机或博弈机台型号: MWP-602 MWP-602A MWP-606 MWP-606A MWP-608ATX 电源基础数据功率: 100-350W 输出: 5、6说明: * 市场通用规格之ATX PC 电源* IPC 系列: 1U/2U 设计,高信赖度,适合工业PC 使用* ATX-100:塑料壳封装,类似一般适配器(Adaptor)型号: ATX-100 IPC-200 IPC-250 IPC-300 YP-350A YP-400A YP-450A YP-350JDC/DC-模块型模块类基础数据功率:0.5-30W 1说明:* 板上模块型,插件于系统主PCB上型号: DCW12SCW12SUS01SDM30TKA30DKA30DKE15SKE DET01SFT01SBT01SUS01SRS板上型基础数据功率: 5-15W 输出: 1 2说明: * 板上PCB型,插件于系统主PCB上* 超低高度* 4:1宽输入围型号: NSD05NSD15-D NSD15-S NSD10-D NSD10-SDC/DC-开板系列PCB系列基础数据功率: 5-15W 输出: 1说明: * CE认证* PCB式型号: PSD-15PSD-05PSD-30PSD-45DC/DC-置系列机壳型基础数据功率: 15-1000W 输出: 1 说明: * 具金属外壳防护之DC-DC 转换器 * CE 认证 * 适合用于电池备援系统或各式交通工具上型号: SD-15 SD-25 SD-50 SD-100 SD-150 SD-200 SD -350 SD-500 SD-1000DC/AC-逆变器方波型基础数据功率: 150-2500W 输出:1说明:* 方波输出,适合用于电阻式负载型号: A301-100 A301-150 A301-300 A301-600 A301-1K0 A301-1K7 A301-2K5 A302-100 A302-150 A302-300 A302-600 A302-1K0 A302-1K7 A302-2K5正弦波型基础数据功率: 150-1500W输出:1说明: * 正弦波输出,低总谐波失真(THD)* 适合用于马达类负载,PLC,或各种家电设备* TN系列建AC充电器,太阳能充电器,与AC旁路(bypass)开关* IRC系列为搭配TS-700~TN/TS-3000來使用之远程遥控器型号: TS-200TS-400TS-700TS-1000TS-1500TN-150 0TS-3000TN-3000IRC1/2/3。