IAD132E(T)配置操作说明new

******************************************
* *
* IAD2000 Integrated Access Device *
* *
******************************************
Copyright(C) 2002-2004 by HUAWEI TECH CO., LTD
Host name:
Phone:
User name (<=15 chars):root
User password (<=15 chars):admin
IAD2000>enable
IAD2000#configure terminal
IAD2000(config)#eid psmfc.ts.xz 域名一般设置为“专网名称.区域.徐州”的拼音缩写★Command executing, please wait...
--------------------------------------------------
Equipment ID : psmfc.ts.xz
--------------------------------------------------
IAD2000(config)#ip address
{ ip-address<I> }:10.136.42.186 此处为NGN私网地址★
{ net-mask<M> }:255.255.255.0
{ <cr>|gateway-ip<I> }:10.136.42.1
Command:
ip address 10.136.42.186 255.255.255.0 10.136.42.1
Changing net parameter may affect current service, continue?[Y|N]:y
Command executing, please wait...
--------------------------------------------------
Device network configuration is:
IP address: 10.136.42.186
Subnet mask: 255.255.255.0
Default Gateway: 10.136.42.1
--------------------------------------------------
Begin Register to IADMS............................................
Register time out
IAD2000(config)#iadms
{ dns<K>|iadms_address<I>|ip<K>|name<K>|register<K>|handshake<K> }:ip
{ iadms_address<I> }:10.136.41.143
{ getcommunity<S><1,15> }:psmfc-get 此处前缀尽量与域名前缀保持一致★
{ setcommunity<S><1,15> }:psmfc-set ★
{ trapcommunity<S><1,15> }:trap ★
{ <cr>|iadmsTrapPort<U><0,65535> }:162
Command:
iadms ip 10.136.41.143 psmfc-get psmfc-set trap 162
IAD2000(config)#iadms dns disable
IAD2000(config)#interface mg 0
IAD2000(config-if-mg-0)#show if-mg attrib
-------------------------------------------------
MGID Protocol Codetype DomainName
0 MGCP text -
Transmode IADPort IADIP Interface state
UDP 2427 10.136.41.133 Interface faulty
MGCport MGCIP/DomainName InterfaceName
2727 - aaln
-------------------------------------------------
IAD2000(config-if-mg-0)#if-mg attribute
{ port<K>|domain-name<K>|mgcip<K>|mgcport<K>|interface-name<K> }:domain-name { domain-name<S><1,60> }:psmfc.ts.xz 此处与域名保持一致★
{ <cr>|port<K>|mgcip<K>|mgcport<K>|interface-name<K>|password<K> }:mgcip
{ mgcip<S><0,64> }:10.136.0.6
{ <cr>|port<K>|mgcport<K>|interface-name<K> }:
Command:
if-mg attribute domain-name psmfc.ts.xz mgcip 10.136.0.6
IAD2000(config-if-mg-0)#show if-mg attribute
-------------------------------------------------
MGID Protocol Codetype DomainName
0 MGCP text psmfc.ts.xz
Transmode IADPort IADIP Interface state
UDP 2427 10.136.41.133 Inteface waiting for ack MGCport MGCIP/DomainName InterfaceName
2727 10.136.0.6 aaln
-------------------------------------------------
IAD2000(config-if-mg-0)#mg backup-mgc mgcip 10.136.8.6 mgcport 2727
IAD2000(config-if-mg-0)#exit
IAD2000(config)#write
Command executing, please wait...
Main control board in slot 0 starts to save configuration data, please wait.....
.
IAD2000(config)#The configuration data backed up for the main control board in s
lot 0 is: 96%
The configuration data backed up for the main control board in slot 0 is: 98%
The configuration data backed up for the main control board in slot 0 is: 100% The backup of configuration data on the active board in slot 0 has been complete d
IAD2000(config)#exit
IAD2000#exit
You have quitted from the system!
Press any key to get started!
带★部分需要与综合业务网数据对接，请设置后通知我。