电池规格书模板

Specification Approval Sheet产品规格承认书Customer 客户名称：域拓Model产品型号：4LType 产品类型：Li-ion batterySpecification产品规格：3.7V/1400mAHsigned by client客户签名Confirmed确认：Checked 审核：Approved 批准：signed by manufacturer生产商签名Prepared 制定：肖泽建Checked 审核：Approved 批准：丁明谊AMENDMENT RECORDSModification Time Description Issued Date Approved By0 New release2015-06-26Catalogue 目录1 .Battery type and scope电池型号和适用范围 (3)1 . 1: model产品型号： (4)1 . 2: scope适用范围：客户定义 (4)2 . Basic character and compose of battery电池的基本特性及组成 (4)2 . 1: fundamental performance parameter of battery电池基本性能参数： (4)2 . 2: Main components and parts主要零部件 (6)2 . 3: Regular performance and unfailing performance产品常规性能和可靠性能 (6)2 . 4: Contour Dimension of the Battery电池外形尺寸 (11)3 . Specifications of Parts零部件规格 (102)3 . 1: fender保护板 (102)3 . 2: general electric and protection characters一般电气与保护特征 (102)3 . 2: electric schematic diagram of battery电池电路原理图： (113)3 . 3 : PCB layout 电路布局图………………………………………………………………….错误!未定义书签。

34 . Specifications of the Cells电芯规格 (124)Announcements注意事项 (135)Danger 危险 (135)Warnings 警告 (146)Announcements 注意事项 (157)1 .Battery type and scope电池型号和适用范围This Specification Approval Sheet is for rechargeable Li-polymer battery provided by Shirui Battery Co., LTD.This product is according with the national standard of PRC. ‘GB/T18287-2000’. ‘General specification of lithium-ion battery for cellular phone’.本《规格书》为时瑞电池有限公司提供的可充电式锂离子电池规格。

此产品符合中华人民共和国国家标准‘GB/T18287-2000’《蜂窝电话用锂离子电池总规范》。

1 . ：model产品型号：4L2 . Basic character and compose of battery电池的基本特性及组成2 . 1：fundamental performance parameter of battery电池基本性能参数：S/N 序号Details内容parameters参数remarks备注1 Rated voltage额定电压3.7V2 Rated capacity额定容量1400mAHd ischarge with 0.2C to 2.75Vafter Complete charge within1h, measuring the dischargepower完全充电后1小时内,用0.2C放电至2.75V，测量其放电电量。

截止电压 2.9-3.1V3 Limited charge voltage充电限制电压4.25V4 internal resistance内阻≤150mΩ5 charge mode充电方式C.C/C.V.恒流/恒压方式恒流/恒压6 Charge time充电时间6HStandard charging 0.2C280mA标准充电0.2C（280mA）2.5H 1C（280mA）7 Max Charge Current最大充电电流1400mA9 Max discharge current最大放电电流Lasting 持续：1400mATransient peak瞬间峰值：2800mA10 Working temperature工作温度charging充电时0~45℃discharging放电时-20~60℃11 Storage temperature贮存温度1 Month一个月-20~60℃Charge to 40%~50% ofcapacity when storage贮存时应充电至容量的40%~50%6 months六个月-20~30℃12 Storage humidity贮存湿度Re lative humidity65 ± 20%RHrelative humidity相对湿度13 weight重量约32g14Self-discharging自放电When the battery pack is without load, certain operational current isconsumed since the cell protects the circuit, thus leading to thebringing down of pack voltage. For long storing time, pleasesupplement the charging and note the “seventh. Special notice”Pack before shipping出贷标准Charged with about 25-35% power and the voltage is 3.8-3.95 Vbeing shipping.15 Identify resistanceID识别电阻68KΩTo ground16 Cycle life循环寿命300 times300循环次capacity≥60﹪容量≥60﹪If you need the battery protection parameters, please refer to PAGE 11.如需参考电池保护参数，请参阅第11页。

2 . 2：Main components and parts主要零部件Materials 材料材料model型号规格quantity数量related technicalparameters相关技术参数manufacturer厂商li-ion battery cell 锂离子电池芯484461AR 1PCSPlease refer tothe battery cellspecification请参照电芯规格书/protection board保护板XHY-FHLN-4L 1PCS / /2 . 3：Regular performance and unfailing performance产品常规性能和可靠性能S/N 序号inspection item检验项目Standard标准Testing Method测试方法1 hightemperatureproperty高温性能discharge with 0.5C5Anot less than 100minsunder 55 + 2 ℃,theappearance withoutdistortion andcrack.电池在55±2℃，用0.5C5A放电时间不少于102min,电池外观无变形、无爆裂.set the battery 2h in the environment with 55±2℃ after Complete charge, then dischargewith 0.5C5A完全充电后置于55±2℃,2h用0.5C5A放电2 Lowtemperatureproperty低温性能discharge with 0.2C5Anot less than 3hunder -20±2℃,theappearance withoutdistortion andcrack.电池在-20±2℃，用0.2C5A放电时间不少于3h,电池外观无变形、无爆裂.set the battery 16-24h in the environment with-20±2℃ after Complete charge, thendischarge with 0.5C5A,then set the battery in20±5℃, 2h later observe the batteryappearance完全充电后置于-20±2℃,16-24h用0.2CA放电,结束后将电池置于20±5℃条件下搁置2h,观察电池外观.discharge with 0.2C5Anot less than 3.5hunder -10±2℃,theappearance withoutdistortion and crack在-10±2℃，用0.2C5A放电时间不少于3.5h,电池外观无变形、无爆裂.set the battery 16-24h in the environment with-10±2℃ after Complete charge, thendischarge with 0.5C5A,then set the battery in20±5℃, 2h later observe the batteryappearance完全充电后置于-10±2℃,16-24h用0.2C5A放电,结束后将电池置于20±5℃条件下搁置2h,观察电池外观.3 Capability ofkeepingelectricity荷电保持能力Discharge not lessthan 4.25h放电时间不少于4.25hOpen circuit 28d under the environment with20±5℃after complete charge, then dischargewith 0.2C5A完全充电后,在20±5℃条件下,将电开路搁置28d,再0.2C5A放电.4 Constant dampand hotproperty恒定湿热性能Battery appearanceshould have noobvious deformation,rust, smoke orexplosion, dischargetime not less than36min电池外观应无明显变形、锈蚀、冒烟或爆炸，放电时间不低于36min.After complete charge, shelve the battery inthe condition of 40±2℃ Relative humidity is90% - 95% with constant temperature andhumidity, 48h later, shelve it in 20±5℃2h,then discharge with 1C5A完全充电后,在40±2℃,相对湿度为90%-95%的恒温恒湿条件下搁置48h后,再取出放在20±5℃条件下搁置2h 再以1C5A放电.5 shake振动Battery appearanceshould have noobvious deformation,rust, smoke orexplosion, voltagenot less than 3.6V电池外观应无明显变形、冒烟或爆炸，电池电压不低于3.6V.After fully charged with 0.38 mm amplitude,make 10Hz ~ 30Hz resonant frequency,batteries installed in vibration bench, setup X.Y.Z three direction from swept-frequencyrate for 1oct/min, circular sweep frequencyvibration 30min完全充电后,以0.38mm振幅作谐振10Hz~55Hz的频率,将电池安装在振动台上,设置好X.Y.Z三个方向上从扫频速率为1oct/min, 循还扫频振动30min6 FreeDropTest自由跌落Battery appearanceshould have no leakage,no smoke or explosion,but allowed slightdeformation电池允许轻微变形，但应不漏液,不冒烟,不爆炸。