MyPower S3100系列以太网交换机安装手册V4.0

合集下载

H3C S3600系列以太网交换机操作手册-Release 1602(V1.02) 42-IPv6管理操作

目录1 IPv6基础配置....................................................................................................................................1-11.1 IPv6简介...........................................................................................................................................1-11.1.1 IPv6协议特点.........................................................................................................................1-11.1.2 IPv6地址介绍.........................................................................................................................1-21.1.3 IPv6邻居发现协议介绍...........................................................................................................1-51.1.4 IPv6 DNS简介.........................................................................................................................1-71.1.5 IPv6协议规范.........................................................................................................................1-71.2 IPv6配置...........................................................................................................................................1-71.2.1 配置IPv6单播地址..................................................................................................................1-81.2.2 配置IPv6邻居发现协议...........................................................................................................1-91.2.3 配置IPv6静态路由................................................................................................................1-111.2.4 配置TCP6.............................................................................................................................1-111.2.5 配置指定时间内发送ICMPv6差错报文的最大个数...............................................................1-111.2.6 配置设备发送的ICMPv6回送应答报文的跳数限制...............................................................1-121.2.7 配置IPv6 DNS.......................................................................................................................1-121.2.8 IPv6显示与维护....................................................................................................................1-131.3 IPv6配置举例..................................................................................................................................1-151.3.1 IPv6单播地址配置................................................................................................................1-152 IPv6应用配置....................................................................................................................................2-12.1 IPv6应用简介....................................................................................................................................2-12.2 IPv6应用配置....................................................................................................................................2-12.2.1 IPv6的ping操作......................................................................................................................2-12.2.2 IPv6的Traceroute操作...........................................................................................................2-12.2.3 IPv6的TFTP操作....................................................................................................................2-22.2.4 IPv6的Telnet操作...................................................................................................................2-32.3 IPv6应用配置举例.............................................................................................................................2-42.3.1 IPv6应用的典型配置..............................................................................................................2-42.4 IPv6应用故障诊断与排除..................................................................................................................2-52.4.1 无法Ping通远端的目的地址....................................................................................................2-52.4.2 无法实现Traceroute................................................................................................................2-62.4.3 无法实现TFTP........................................................................................................................2-62.4.4 无法实现Telnet.......................................................................................................................2-61 IPv6基础配置z在以下介绍中出现的路由器及路由器图标，代表了一般意义下的路由器以及运行了路由协议的三层交换机。

迈普MyPowerS千兆汇聚路由交换机配置手册V操作手册维护与调试操作

迈普MｙPower－Ｓ千兆汇聚路由交换机配置手册Ｖ.-操作手册－-维护与调试操作————————————————————————————————作者: ————————————————————————————————日期:ﻩ目录第1章维护和调试ﻩ错误!未定义书签。

1．1Pinｇ ............................................................................ 错误!未定义书签。

１.２Pｉｎｇ6ﻩ错误!未定义书签。

1.3 Ｔracｅroute .................................................................... 错误!未定义书签。

1.4 Tracｅｒoｕｔe6............................................................... 错误!未定义书签。

1.5 Shoｗ ................................................................................ 错误!未定义书签。

１.６Dｅbug........................................................................ 错误!未定义书签。

1．7 系统日志ﻩ错误!未定义书签。

1．7．１系统日志介绍 ................................................................ 错误!未定义书签。

1．７.2 系统日志配置ﻩ错误!未定义书签。

1．7.3系统日志配置举例 ........................................................... 错误!未定义书签。

h3c s3100-si系列以太网交换机安装手册

《H3C S3100-SI 系列以太网交换机命令手册》
详细解释 S3100-SI 系列以太网交换机中的操作命令。对命令行接口、登录交换机、VLAN、GVRP、端口、 MAC 地址转发表管理、 MSTP 、 802.1x 、 AAA&RADIUS 、ACL、QoS、SNMP、RMON、NTP、 SSH 等模块的配置命令进行了详细解释
前言
相关手册
手册名称
用途
《H3C S3100-SI 系列以太网交换机操作手册》
介绍了命令行接口、登录交换机、VLAN、GVRP、端口、 MAC 地址转发表管理、 MSTP 、 802.1x 、 AAA&RADIUS 、ACL、QoS、SNMP、RMON、NTP、 SSH 等模块的配置
wwwhuawei3comcomcn相关手册手册名称用途h3cs3100si系列以太网交换机操作手册介绍了命令行接口登录交换机vlangvrp端口mac地址转发表管理mstp8021xaaaradiusaclqossnmprmonntpssh等模块的配置h3cs3100si系列以太网交换机命令手册详细解释s3100si系列以太网交换机中的操作命令
带方括号“[ ]”表示窗口名、菜单名和数据表，如“弹出[新建用户] 窗口”。
多级菜单用“/”隔开。如[文件/新建/文件夹]多级菜单表示[文件]菜单下的[新建]子菜单下的[文件夹]菜单项。
2. 各类标志本书还采用各种醒目标志来表示在操作过程中应该特别注意的地方，这些标志的意义如下：
小心、注意：提醒操作中应注意的事项，不当的操作可能会导致数据丢失或者交换机损坏。
本书简介
《H3C S3100-SI 系列以太网交换机安装手册》主要介绍了 H3C S3100-SI 系列以太网交换机的硬件特性及交换机的安装、配置和维护。在安装交换机前及安装过程中，为避免可能出现的设备损坏和人身伤害，请仔细阅读本手册。本手册包含如下章节：

H3C S3100V2系列以太网交换机安装指导-6W103-整本手册

资料意见反馈
如果您在使用过程中发现产品资料的任何问题，可以通过以下方式反馈： E-mail：info@ 感谢您的反馈，让我们做得更好！
目录
1 产品介绍 ............................................................................................................................................ 1-1 1.1 产品型号............................................................................................................................................ 1-1 1.2 面板介绍............................................................................................................................................ 1-1 1.2.1 S3100V2-26TP-SI/S3100V2-26TP-EI .................................................................................... 1-1 1.2.2 S3100V2-16TP-SI/S3100V2-16TP-EI .................................................................................... 1-2 1.2.3 S3100V2-8TP-SI/S3100V2-8TP-EI ........................................................................................ 1-3 1.2.4 S3100V2-26TP-PWR-EI......................................................................................................... 1-3 1.2.5 S3100V2-16TP-PWR-EI......................................................................................................... 1-4 1.2.6 S3100V2-8TP-PWR-EI........................................................................................................... 1-5

MyPower S1200系列简单网管型交换机用户手册(适用于SM1200-24FET2GE-AC)

MyPower S1200系列简单网管型交换机系列简单网管型交换机用户用户手册手册（适用于SM1200SM1200--2424FET FET FET2GE 2GE 2GE--AC AC））本手册著作权属迈普通信技术有限公司所有本手册著作权属迈普通信技术有限公司所有，，未经著作权人书面许可未经著作权人书面许可，，任何单位或个人不得以任何方式摘录任何方式摘录、、复制或翻译复制或翻译。

侵权必究侵权必究。

策划：研究院资料服务处 * * *迈普（四川）通信技术有限公司地址：成都市高新区九兴大道16号迈普大厦技术支持热线：8008868668 传真：（+8628）85148948 E-mail ：support@ 网址：邮编：610041 * * *版本：2008年5月第V1.0版编号：MP/DC-RD-CPSJ-110-OI2008-0009目录第1章用户手册简介 (7)1.1用途 (7)1.2约定 (7)1.3用户手册概述 (7)第2章产品概述 (8)2.1产品简介 (8)2.2产品特性 (8)2.2.1 主要特性 (8)2.2.2 规格说明 (9)第3章安装指南 (10)3.1安装 (10)3.1.1 安装在桌面上的方法 (10)3.1.2 安装在机架上的方法 (10)3.1.3 加电 (10)3.2交换机的外观 (11)3.2.1 前面板 (11)3.2.2 后面板 (11)3.3注意事项 (12)第4章交换机基本概念 (14)4.1系统配置 (14)4.1.1 系统信息 (14)4.1.2 IP地址参数 (14)4.1.3 文件传输 (15)4.1.4 保存与复位 (15)4.2端口管理 (15)4.2.1 端口参数 (15)4.2.1.1 端口的工作模式 (16)4.2.1.2 端口的N—Way自动协商功能 (16)4.2.1.3 端口的自动学习功能 (16)4.2.2 流量控制 (16)4.2.3 端口监控 (17)4.2.4 端口描述 (17)4.2.5 端口统计与端口状态 (17)4.2.6 端口带宽 (17)4.2.7 端口广播风暴 (18)4.3网络配置 (18)4.3.1 最大老化时间与动态地址表 (18)4.3.2 静态地址表 (18)4.3.3 静态安全地址表 (19)4.3.4 Ping检测 (19)4.4虚拟局域网管理 (19)4.4.1 VLAN模式配置 (19)4.4.2 基于端口的VLAN (20)4.4.2.1 IEEE802.1 Q Tag VLAN (20)4.4.2.2 禁止VLAN (21)4.4.3 VLAN配置 (21)4.4.4 MTU VLAN组 (21)4.4.5 Trunk 配置 (21)4.5优先级管理 (22)4.5.1 优先级配置 (22)4.5.2 端口优先级表 (23)4.5.3 ToS优先级 (23)4.5.4 802.1 p优先级 (23)4.5.5 802.1 p优先级映射表 (23)第5章W E B 管理 (25)5.1概述 (25)5.2WEB管理的连接 (25)5.2.1 准备工作 (25)5.2.2 连接 (29)5.3WEB管理界面及操作方法 (30)5.3.1 系统配置 (32)5.3.1.1 系统信息 (32)5.3.1.2 系统密码设置 (33)5.3.1.3 IP地址参数 (34)5.3.1.4 文件传输 (34)5.3.1.5 保存与复位 (35)5.3.2 端口管理 (36)5.3.2.1 端口参数 (36)5.3.2.2 端口镜像 (37)5.3.2.3 监控模式配置 (37)5.3.2.4 端口描述 (38)5.3.2.5 端口统计 (39)5.3.2.6 端口状态 (40)5.3.2.7 端口带宽 (41)5.3.2.8 广播风暴抑制 (43)5.3.3 网络配置 (45)5.3.3.1 最大老化时间 (45)5.3.3.2 动态地址表 (46)5.3.3.3 MAC 地址绑定 (46)5.3.3.4 Ping检测 (47)5.3.4 VLAN管理 (48)5.3.4.1 VLAN模式配置 (48)5.3.4.2 Global VID配置 (48)5.3.4.3 VLAN配置 (49)5.3.4.4 MTU VLAN组 (51)5.3.5 Trunk配置 (52)5.3.6 优先级管理 (52)5.3.6.1 优先级配置 (53)5.3.6.2 端口优先级表 (53)5.3.6.3 ToS优先级 (54)5.3.6.4 802.1 p优先级 (55)5.3.6.5 802.1 p优先级映射表 (56)第6章带外管理 (58)6.1概述 (58)6.2带外（OUT—OF-BAND)的连接方法 (58)6.3带外管理的界面及操作方法 (59)6.4CLI命令使用说明 (60)6.4.1 语法帮助 (60)6.4.2 命令帮助使用说明 (60)6.4.3 常用命令 (60)6.4.3.1 help 命令 (60)6.4.3.2 通过Tftp升级和下载配置文件 (61)6.4.3.3 cls 命令 (61)6.4.3.4 del 命令 (61)6.4.3.5 退出命令logout (62)6.4.3.6 Ping 命令 (62)6.4.3.7 reset 命令 (62)6.4.3.8 set 命令 (63)6.4.3.9 show 命令 (63)理 (65)管理TELNET 管第7章 TELNET7.1概述 (65)7.2T ELNET的连接方法 (65)7.3连接 (68)插座//连接器引脚详细说明 (70)附录A RJA RJ--45插座第1章用户手册简介感谢您购买SM1200-24FET2GE百兆管理型交换机整体性能优越，使用简单，是您提升工作组性能的理想选择。

H3C S3600 系列以太网交换机命令手册-MAC 地址转发表管理.

目录第1章MAC地址转发表管理命令............................................................................................1-1 1.1 MAC地址转发表管理命令..................................................................................................1-1 1.1.1 display mac-address aging-time.............................................................................1-11.1.2 display mac-address...............................................................................................1-21.1.3 mac-address............................................................................................................1-31.1.4 mac-address max-mac-count..................................................................................1-51.1.5 mac-address timer..................................................................................................1-6第1章MAC地址转发表管理命令.. 说明：本章节内容只涉及静态、动态和黑洞MAC地址表项的管理，有关组播MAC地址表项管理的内容，请参见《H3C S3600 系列以太网交换机命令手册》中“组播协议”部分。

H3C S3600系列以太网交换机操作手册-RELEASE 1510

NTP 目录目录第1章 NTP配置.....................................................................................................................1-11.1 NTP简介.............................................................................................................................1-11.1.1 NTP的应用..............................................................................................................1-11.1.2 NTP工作原理...........................................................................................................1-21.1.3 NTP的工作模式.......................................................................................................1-31.2 配置NTP工作模式..............................................................................................................1-51.2.1 配置准备..................................................................................................................1-51.2.2 配置过程..................................................................................................................1-61.3 配置访问控制权限..............................................................................................................1-81.4 配置NTP验证功能..............................................................................................................1-81.4.1 配置准备..................................................................................................................1-81.4.2 配置过程..................................................................................................................1-91.5 配置NTP可选参数............................................................................................................1-111.6 NTP配置显示...................................................................................................................1-111.7 NTP典型配置举例............................................................................................................1-121.7.1 配置NTP服务器模式..............................................................................................1-121.7.2 配置NTP对等体模式..............................................................................................1-131.7.3 配置NTP广播模式..................................................................................................1-151.7.4 配置NTP组播模式..................................................................................................1-171.7.5 配置带身份验证的NTP服务器模式........................................................................1-19第1章 NTP配置1.1 NTP简介NTP（Network Time Protocol，网络时间协议）是由RFC1305定义的时间同步协议，用来在分布式时间服务器和客户端之间进行时间同步。

H3C S3600 系列以太网交换机命令手册-VLAN

目录第1章VLAN配置命令............................................................................................................1-1 1.1 VLAN配置命令...................................................................................................................1-1 1.1.1 description...............................................................................................................1-11.1.2 display interface Vlan-interface...............................................................................1-21.1.3 display vlan..............................................................................................................1-31.1.4 interface Vlan-interface...........................................................................................1-41.1.5 name.......................................................................................................................1-51.1.6 shutdown.................................................................................................................1-61.1.7 vlan..........................................................................................................................1-61.1.8 vlan to......................................................................................................................1-71.2 基于端口的VLAN配置命令.................................................................................................1-8 1.2.1 port..........................................................................................................................1-81.3 基于协议的VLAN配置命令.................................................................................................1-9 1.3.1 display protocol-vlan interface.................................................................................1-91.3.2 display protocol-vlan vlan......................................................................................1-101.3.3 port hybrid protocol-vlan vlan................................................................................1-111.3.4 protocol-vlan..........................................................................................................1-12第1章VLAN配置命令1.1 VLAN配置命令1.1.1 description【命令】description textundo description【视图】VLAN视图/VLAN接口视图【参数】text：描述当前VLAN或VLAN接口的一个字符串。

H3C S3600 系列以太网交换机命令手册-附录

H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引附录A 命令总索引本命令索引包括手册中所出现的全部命令，按字母序排列，左边为命令行，右边为该命令所在的功能模块和页码。

A B C D E F G H I J K L M N O P Q R S T U V W X Y ZAabr-summary路由协议3-1AAA-RADIUS-HWTACaccess-limit 1-1ACS-EADAAA-RADIUS-HWTACaccounting 1-3ACS-EADaccounting domain DHCP 4-1AAA-RADIUS-HWTACaccounting optional 1-4ACS-EADAAA-RADIUS-HWTACaccounting optional 1-26ACS-EADAAA-RADIUS-HWTACaccounting-on enable 1-27ACS-EADacl 登录交换机2-1acl ACL 1-1active region-configuration MSTP 1-1add-member Cluster 1-14address-check DHCP 2-1administrator-address Cluster 1-15am enable 访问管理1-1am ip-pool 访问管理1-1am trap enable访问管理1-22-2am user-bind端口安全-端口绑定2-1am user-bind interface 端口安全-端口绑定4-1apply poe-profile PoE-PoE Profileapply cost 路由协议2-1apply qos-profile QoS-QoS Profile2-1apply tag 路由协议4-23-2area 路由协议A-1H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引arp check enable ARP 1-1arp static ARP 1-1arp timer aging ARP 1-2asbr-summary路由协议3-3ascii FTP与TFTP 1-6attribute AAA-RADIUS-HWTACACS-EAD 1-2authentication AAA-RADIUS-HWTACACS-EAD 1-4authentication-mode 登录交换机1-1authentication-mode 路由协议3-4authorization AAA-RADIUS-HWTACACS-EAD 1-6auto-build Cluster 1-15auto-execute command 登录交换机1-2Bbackup current-configuration文件系统管理1-19bims-server DHCP 1-1binary FTP与TFTP 1-7boot attribute-switch文件系统管理1-1boot boot-loader 文件系统管理1-2boot boot-loader 系统维护与调试3-1boot boot-loader backup-attribute 文件系统管理1-3boot bootrom系统维护与调试3-1boot web-package 文件系统管理1-3bpdu-drop any MSTP 1-1bpdu-tunnel VLAN-VPN 2-1bpdu-tunnel uplink VLAN-VPN 2-2 broadcast-suppression端口基本配置1-1bsr-policy 组播协议6-1build Cluster 1-17bye SSH终端服务2-3bye FTP与TFTP 1-8A-2H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引cache-sa-enablec-bsrcdcdcdcdupcdupchange self-unitchange unit-idcheck region-configurationcheckzeroclock datetimeclock summer-timeclock timezonecloseclustercluster enablecluster switch-tocluster-maccluster-mac syn-interval command-privilege level copycopy configuration countc-rpcrp-policycut connectionDdatabitsdata-flow-format组播协议7-1组播协议6-2SSH终端服务2-31-5FTP与TFTP 1-9SSH终端服务2-4FTP与TFTP 1-9IRF Fabric 1-1IRF Fabric 1-1MSTP 1-2路由协议2-1系统维护与调试1-1系统维护与调试1-1系统维护与调试1-2FTP与TFTP 1-10Cluster 1-18Cluster 1-19Cluster 1-20Cluster 1-21Cluster 1-22命令行接口1-1文件系统管理1-6端口基本配置1-2HWPing 1-1组播协议6-3组播协议6-4AAA-RADIUS-HWTAC 文件系统管理1-6ACS-EAD登录交换机1-3AAA-RADIUS-HWTAC 1-28ACS-EADA-3H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引data-flow-formatdebuggingdebuggingdefault costdefault costdefault intervaldefault limitdefault tagdefault typedefault-costdefault-route-advertisedeletedeletedeletedelete static-routes alldelete-memberdescriptiondescriptiondescriptiondescriptiondestination-ipdetect-groupdetect-listdhcp enabledhcp relay handdhcp relay information enabledhcp relay information strategydhcp select globaldhcp select interfacedhcp server bims-serverdhcp server detectdhcp server dns-listdhcp server domain-namedhcp server expiredAAA-RADIUS-HWTAC1-57ACS-EADFTP与TFTP 1-11系统维护与调试1-10路由协议2-2路由协议3-4路由协议3-5路由协议3-6路由协议3-6路由协议3-7路由协议3-8路由协议3-9SSH终端服务2-4文件系统管理1-7FTP与TFTP 1-12路由协议1-11Cluster 1-22 VLAN 1-1配置管理VLAN 1-1端口基本配置1-4ACL 1-2 HWPing 1-1自动侦测1-1自动侦测1-1DHCP 1-2 DHCP 2-1 DHCP 2-2 DHCP 2-3DHCP 1-3 DHCP 1-4 DHCP 1-5 DHCP 1-6 DHCP 1-7 DHCP 1-8 DHCP 1-9A-4H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引dhcp server forbidden-ip DHCP1-10dhcp server ip-pool DHCP1-11dhcp server nbns-list DHCP1-12dhcp server netbios-type DHCP1-13dhcp server option DHCP1-14dhcp server ping DHCP1-16dhcp server relay information enable DHCP 1-16 dhcp server static-bind DHCP 1-17dhcp server voice-config DHCP 1-18dhcp server voice-config interface DHCP 1-19 dhcp-security static DHCP 2-4dhcp-security tracker DHCP 2-5dhcp-server DHCP 2-5dhcp-server detect DHCP 2-6dhcp-server ip DHCP 2-7dhcp-snooping DHCP 3-1dhcp-snooping trust DHCP 3-1dir SSH终端服务2-5dir 文件系统管理1-8dir FTP与TFTP 1-13disconnect FTP与TFTP 1-14display acl ACL 1-3display am 访问管理1-3display am user-bind 端口安全-端口绑定2-2display arp ARP 1-3display arp | ARP 1-4display arp count ARP 1-5display arp timer aging ARP 1-6display boot-loader 文件系统管理1-4display boot-loader 系统维护与调试3-2display bootp client 配置管理VLAN2-1display brief interface 端口基本配置1-5display channel 信息中心1-1display clock 系统维护与调试1-6display cluster Cluster1-23A-5H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引display cluster candidatesdisplay cluster membersdisplay connectiondisplay cpudisplay current-configurationdisplay debugging display debugging fabric by-moduledisplay detect-groupdisplay devicedisplay dhcp clientdisplay dhcp server conflictdisplay dhcp server expireddisplay dhcp server free-ipdisplay dhcp server ip-in-usedisplay dhcp server statisticsdisplay dhcp server treedisplay dhcp-securitydisplay dhcp-serverdisplay dhcp-server interfacedisplay dhcp-snoopingdisplay dhcp-snooping trustdisplay diagnostic-informationdisplay dldp display dns domaindisplay dns dynamic-hostdisplay dns serverdisplay domaindisplay dot1xdisplay fandisplay fibdisplay fib |display fib acldisplay fib ip-addressCluster 1-24Cluster 1-26AAA-RADIUS-HWTAC1-8ACS-EAD3-3系统维护与调试1-1配置文件管理系统维护与调试1-7系统维护与调试1-8自动侦测1-2系统维护与调试3-4配置管理VLAN 2-2DHCP 1-21DHCP 1-21DHCP 1-23DHCP 1-23DHCP 1-24DHCP 1-26DHCP 2-8DHCP 2-9DHCP 2-10DHCP 3-2DHCP 3-3系统维护与调试1-11DLDP 1-1域名解析1-1域名解析1-1域名解析1-2AAA-RADIUS-HWTAC1-10ACS-EAD802.1x 1-1系统维护与调试3-4IP地址配置-IP性能配置2-1IP地址配置-IP性能配置2-4IP地址配置-IP性能配置2-3IP地址配置-IP性能配置2-2A-6H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引display fib ip-prefixdisplay fib statisticsdisplay ftmdisplay ftp source-ipdisplay ftp-serverdisplay ftp-server source-ipdisplay ftp-userdisplay garp statisticsdisplay garp timerdisplay gvrp statisticsdisplay gvrp statusdisplay habpdisplay habp tabledisplay habp trafficdisplay history-commanddisplay hwpingdisplay hwtacacsdisplay icmp statisticsdisplay igmp groupdisplay igmp interfacedisplay igmp-snooping configurationdisplay igmp-snooping groupdisplay igmp-snooping statistics display info-centerdisplay interfacedisplay interface Vlan-interfacedisplay interface Vlan-interfacedisplay ip hostdisplay ip interfacedisplay ip interface Vlan-interfacedisplay ip ip-prefixdisplay ip routing-tabledisplay ip routing-tabledisplay ip routing-table ip-addressIP地址配置-IP性能配置2-5IP地址配置-IP性能配置IRF Fabric 1-3FTP与TFTP 1-15FTP与TFTP1-1FTP与TFTP1-2FTP与TFTP 1-2GVRP 1-1GVRP 1-1GVRP 1-5GVRP 1-6802.1x 2-1802.1x 2-2802.1x 2-2命令行接口1-2HWPing 1-2AAA-RADIUS-HWTAC 1-58ACS-EADIP地址配置-IP性能配置2-6组播协议5-1组播协议5-2组播协议1-1组播协议1-2组播协议1-2信息中心1-1端口基本配置VLAN 1-2配置管理VLAN 1-2域名解析1-3IP地址配置-IP性能配置1-1配置管理VLAN1-3路由协议4-2配置管理VLAN1-4路由协议1-1配置管理VLAN1-5A-7H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引1-2display ip routing-table ip-address1 ip-address2配置管理VLANdisplay ip routing-table ip-address路由协议1-7display ip routing-table ip-address1 ip-address2路由协议1-5display ip routing-table protocol 配置管理VLAN1-8display ip routing-table protocol 路由协议1-6display ip routing-table radix 配置管理VLAN1-10display ip routing-table radix 路由协议1-8display ip routing-table statistics 配置管理VLAN 1-10display ip routing-table statistics 路由协议1-8display ip routing-table verbose 配置管理VLAN 1-11display ip routing-table verbose 路由协议1-9display ip socket IP地址配置-IP性能配置2-8display ip statistics IP地址配置-IP性能配置2-9display irf-fabric IRF Fabric 1-4display isolate port 端口隔离1-1display isolate port 访问管理1-4display lacp system-id 端口汇聚1-5display link-aggregation interface 端口汇聚1-1display link-aggregation summary端口汇聚1-2display link-aggregation verbose 端口汇聚1-3AAA-RADIUS-HWTACdisplay local-server statistics 1-29ACS-EADAAA-RADIUS-HWTACdisplay local-user 1-11ACS-EADdisplay logbuffer 信息中心1-3display logbuffer summary信息中心1-4display loopback-detection端口基本配置1-9display mac-address MAC地址转发表管理1-2display mac-address aging-time MAC地址转发表管理1-1display mac-address multicast static 组播协议3-2display mac-address security 端口安全-端口绑定1-1display mac-authentication 集中式MAC地址认证1-1display memory路由协议5-1display memory系统维护与调试3-5A-8H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引5-2display mirror 镜像display memory limit 路由协议1-10display mirroring-group 镜像1-1display msdp brief 组播协议7-1display msdp peer-status 组播协议7-2display msdp sa-cache组播协议7-3display msdp sa-count 组播协议7-4display multicast forwarding-table 组播协议2-1display multicast routing-table组播协议2-2display multicast-source-deny 组播协议2-4display ndp Cluster 1-1display ntdp Cluster 1-6display ntdp device-list Cluster 1-7display ntp-service sessions NTP 1-1 display ntp-service status NTP 1-2display ntp-service trace NTP 1-4display ospf abr-asbr 路由协议3-10display ospf asbr-summary路由协议3-11display ospf brief 路由协议3-12display ospf cumulative 路由协议3-14display ospf error 路由协议3-15display ospf interface 路由协议3-18display ospf lsdb 路由协议3-19display ospf nexthop 路由协议3-21display ospf peer 路由协议3-22display ospf request-queue 路由协议3-25display ospf retrans-queue路由协议3-26display ospf routing 路由协议3-27display ospf vlink 路由协议3-28display packet-filter ACL1-4display pim bsr-info 组播协议6-5display pim interface 组播协议6-6display pim neighbor 组播协议6-7display pim routing-table 组播协议6-8 A-9H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引6-9display poe interface PoE-PoE Profiledisplay pim rp-info 组播协议1-1display poe interface power PoE-PoE Profile1-4display poe powersupply PoE-PoE Profile1-5display poe temperature-protection PoE-PoE Profile1-6display poe-profile PoE-PoE Profile2-2display port 端口基本配置1-11display port vlan-vpn VLAN-VPN 1-1display port-security端口安全-端口绑定1-1display power系统维护与调试3-5display protocol-priority QoS-QoS Profile 1-1display protocol-vlan interface VLAN 1-9display protocol-vlan vlan VLAN 1-10display qos cos-local-precedence-map QoS-QoS Profile 1-1 display qos-interface all QoS-QoS Profile 1-2display qos-interface line-rate QoS-QoS Profile 1-3 display qos-interface mirrored-to 镜像1-2display qos-interface mirrored-to 镜像1-11display qos-interface traffic-limit QoS-QoS Profile 1-3 display qos-interface traffic-priority QoS-QoS Profile 1-4display qos-interface traffic-redirect QoS-QoS Profile 1-5 display qos-interface traffic-statistic QoS-QoS Profile 1-5 display qos-profile QoS-QoS Profile 2-2display queue-scheduler QoS-QoS Profile 1-6AAA-RADIUS-HWTACdisplay radius scheme 1-30ACS-EADAAA-RADIUS-HWTACdisplay radius statistics 1-32ACS-EADdisplay resilient-arp ARP 2-1display rip 路由协议2-2display rip interface 路由协议2-3display rip routing 路由协议2-4display rmon alarm SNMP-RMON2-1display rmon event SNMP-RMON2-2display rmon eventlog SNMP-RMON2-3display rmon history SNMP-RMON2-4A-10H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引display rmon history unitdisplay rmon prialarmdisplay rmon statisticsdisplay rmon statistics unitdisplay route-policydisplay rsa local-key-pair publicdisplay rsa peer-public-keydisplay saved-configurationdisplay schedule rebootdisplay sftp source-ipdisplay snmp-agentdisplay snmp-agent communitydisplay snmp-agent groupdisplay snmp-agent mib-viewdisplay snmp-agent statisticsdisplay snmp-agent sys-infodisplay snmp-agent trap-listdisplay snmp-agent usm-userdisplay ssh serverdisplay ssh server-infodisplay ssh user-informationdisplay ssh2 source-ipdisplay ssh-server source-ipdisplay startupdisplay stop-accounting-bufferdisplay stop-accounting-bufferdisplay stpdisplay stp region-configurationdisplay tcp statisticsdisplay tcp statusdisplay telnet source-ipdisplay telnet-server source-ipdisplay tftp source-ipIRF Fabric 1-5SNMP-RMON2-5SNMP-RMON2-7IRF Fabric 1-5路由协议4-3SSH终端服务1-1SSH终端服务1-2配置文件管理1-6系统维护与调试3-6SSH终端服务2-6SNMP-RMON 1-1 SNMP-RMON 1-1 SNMP-RMON 1-2 SNMP-RMON 1-3 SNMP-RMON 1-5 SNMP-RMON 1-6 SNMP-RMON 1-6 SNMP-RMON 1-7 SSH终端服务1-4SSH终端服务1-5SSH终端服务1-5SSH终端服务1-6SSH终端服务1-7配置文件管理1-9AAA-RADIUS-HWTAC 1-33ACS-EADAAA-RADIUS-HWTAC 1-59ACS-EADMSTP 1-3MSTP 1-5IP地址配置-IP性能配置2-11IP地址配置-IP性能配置2-13登录交换机1-4登录交换机1-4FTP与TFTP 1-31A-11H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引1-10display time-range ACLdisplay this 配置文件管理1-4display transceiver-information interface 端口基本配置1-10display trapbuffer 信息中心1-5display udp statistics IP地址配置-IP性能配置2-14display udp-helper server UDP Helper1-1display unit 端口基本配置1-11display user-interface 登录交换机1-5display users登录交换机1-6display users系统维护与调试1-8display version 系统维护与调试1-9display vlan VLAN 1-3display vlan Voice VLAN 1-3display voice vlan error-info V oice VLAN 1-1display voice vlan oui V oice VLAN 1-1display voice vlan status V oice VLAN 1-2display vrrp VRRP 1-1display webcache Web Cache重定向1-1display web users 登录交换机1-7dldp DLDP 1-2dldp authentication-mode DLDP 1-3 dldp delaydown-timer DLDP 1-7dldp interval DLDP 1-4dldp reset DLDP 1-4dldp unidirectional-shutdown DLDP 1-5 dldp work-mode DLDP 1-6dns domain 域名解析1-4dns resolve 域名解析1-5dns server 域名解析1-5dns-list DHCP1-28AAA-RADIUS-HWTACdomain 1-13ACS-EADdomain-name DHCP1-29dot1x 802.1x1-4dot1x authentication-method 802.1x1-6A-12H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引dot1x dhcp-launch 802.1x1-7dot1x guest-vlan 802.1x1-7dot1x max-user 802.1x1-8dot1x port-control 802.1x1-9dot1x port-method 802.1x1-10dot1x quiet-period 802.1x1-11dot1x retry 802.1x 1-12dot1x retry-version-max 802.1x 1-13dot1x supp-proxy-check 802.1x 1-13dot1x timer 802.1x 1-15dot1x version-check 802.1x 1-17duplex端口基本配置1-13Eenable snmp trap updown SNMP-RMON 1-8 execute 文件系统管理1-10exit SSH终端服务2-6expired DHCP 1-29Ffabric save-unit-id IRF Fabric 1-6fabric-port enable IRF Fabric 1-8 file prompt 文件系统管理1-11filter-policy export 路由协议2-5filter-policy export 路由协议3-29filter-policy import 路由协议2-6filter-policy import 路由协议3-30fixdisk 文件系统管理1-12flow-control 端口基本配置1-14flow-interval 端口基本配置1-14format 文件系统管理1-12free user-interface 登录交换机1-8free web-users登录交换机2-1frequency HWPing1-4ftm fabric-vlan IRF Fabric1-9A-13H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引2-4ftp FTP与TFTPftp 文件系统管理1-15ftp { cluster | remote-server } source-interface FTP与TFTP1-16ftp { cluster | remote-server } source-ip FTP与TFTP1-17ftp cluster Cluster1-28ftp disconnect FTP与TFTP1-3ftp server enable 文件系统管理2-1ftp server enable FTP与TFTP 1-4ftp source-interface FTP与TFTP 1-17ftp source-ip FTP与TFTP 1-18ftp timeout FTP与TFTP 1-4ftp-server Cluster 1-29ftp-server source-interface FTP与TFTP 1-5ftp-server source-ip FTP与TFTP 1-6Ggarp timer GVRP 1-2garp timer leaveall GVRP 1-4gateway-list DHCP 1-30get SSH终端服务2-7get 文件系统管理2-4get FTP与TFTP 1-18giant-frame statistics enable 端口基本配置1-15gratuitous-arp-learning enable ARP 1-7 gvrp GVRP 1-6gvrp registration GVRP 1-7Hhabp enable 802.1x2-3habp server vlan 802.1x2-4habp timer 802.1x2-4header 登录交换机1-9help SSH终端服务2-8history-command max-size 登录交换机1-11A-14H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引holdtime Cluster 1-30host-route 路由协议2-7hwping HWPing 1-5hwping-agent enable HWPing 1-6AAA-RADIUS-HWTAChwtacacs nas-ip 1-60ACS-EADAAA-RADIUS-HWTAChwtacacs scheme 1-60ACS-EADAAA-RADIUS-HWTACidle-cut 1-13ACS-EADidle-timeout 登录交换机1-12if-match 路由协议4-4if-match cost 路由协议4-5if-match interface 路由协议4-6if-match ip next-hop 路由协议4-6if-match tag 路由协议4-7igmp enable 组播协议5-3igmp group-limit 组播协议5-4igmp group-policy组播协议5-5igmp group-policy vlan 组播协议5-6igmp host-join port 组播协议5-7igmp host-join vlan 组播协议5-8igmp lastmember-queryinterval 组播协议5-8igmp max-response-time 组播协议5-9igmp proxy 组播协议5-10igmp robust-count 组播协议5-11igmp timer other-querier-present 组播协议5-12igmp timer query组播协议5-13igmp version 组播协议5-14igmp-snooping 组播协议1-4igmp-snooping fast-leave组播协议1-4igmp-snooping general-query source-ip 组播协议1-5igmp-snooping group-limit 组播协议1-6A-15H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引igmp-snooping group-policyigmp-snooping host-aging-timeigmp-snooping max-response-time igmp-snooping querierigmp-snooping query-intervaligmp-snooping router-aging-time import-routeimport-routeimport-sourceinfo-center channel nameinfo-center console channelinfo-center enableinfo-center logbufferinfo-center loghostinfo-center loghost sourceinfo-center monitor channelinfo-center snmp channelinfo-center sourceinfo-center switch-oninfo-center synchronousinfo-center timestampinfo-center timestamp loghostinfo-center trapbufferinstanceinterfaceinterface Vlan-interfaceinterface Vlan-interfaceip addressip addressip address bootp-allocip address dhcp-allocip forward-broadcastip host组播协议1-7组播协议1-9组播协议1-9组播协议1-10组播协议1-11组播协议1-11路由协议2-8路由协议3-31组播协议7-5信息中心1-6信息中心1-7信息中心1-7信息中心1-8信息中心1-9信息中心1-10信息中心1-11信息中心1-11信息中心1-12信息中心1-14信息中心1-14信息中心1-15信息中心1-16信息中心1-17MSTP 1-6端口基本配置1-16VLAN 1-4配置管理VLAN 1-13IP地址配置-IP性能配置1-3配置管理VLAN 1-14配置管理VLAN2-3配置管理VLAN2-3IP地址配置-IP性能配置2-15域名解析1-6A-16H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引ip http acl 登录交换机2-2ip http shutdown登录交换机1-12ip ip-prefix 路由协议4-8ip route-static配置管理VLAN 1-14ip route-static自动侦测2-1ip route-static路由协议1-11ip-pool Cluster 1-30irf-fabric authentication-mode IRF Fabric 1-10 Jjumboframe enable 端口基本配置1-17KAAA-RADIUS-HWTACkey 1-34ACS-EADAAA-RADIUS-HWTACkey 1-61ACS-EADLlacp enable 端口汇聚1-5lacp port-priority端口汇聚1-6lacp system-priority端口汇聚1-7language-mode系统维护与调试1-3lcd FTP与TFTP 1-19AAA-RADIUS-HWTAClevel 1-14ACS-EADline-rate QoS-QoS Profile 1-6link-aggregation group agg-id description 端口汇聚1-7link-aggregation group agg-id mode 端口汇聚1-8AAA-RADIUS-HWTAClocal-server 1-35ACS-EADAAA-RADIUS-HWTAClocal-server nas-ip 1-36ACS-EADAAA-RADIUS-HWTAClocal-user 1-15ACS-EADlocal-user 文件系统管理2-1AAA-RADIUS-HWTAClocal-user password-display-mode 1-16ACS-EADA-17H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引2-2lock 登录交换机local-user password-display-mode 文件系统管理1-13logging-host Cluster1-31log-peer-change路由协议3-32loopback 端口基本配置1-17loopback-detection control enable 端口基本配置1-18loopback-detection enable 端口基本配置1-19loopback-detection interval-time 端口基本配置1-20loopback-detection per-vlan enable 端口基本配置1-20ls SSH终端服务2-8ls FTP与TFTP 1-20Mmac-address MAC地址转发表管理1-3mac-address max-mac-count MAC地址转发表管理1-5mac-address multicast interface 组播协议3-1mac-address multicast vlan组播协议3-2mac-address security端口安全-端口绑定1-3mac-address timer MAC地址转发表管理1-6mac-authentication 集中式MAC地址认证1-3mac-authentication authmode usernameasmacaddress 集中式MAC地址认证1-5mac-authentication authmode usernamefixed 集中式MAC地址认证1-5mac-authentication authpassword 集中式MAC地址认证1-6mac-authentication authusername 集中式MAC地址认证1-7mac-authentication domain集中式MAC地址认证1-7mac-authentication interface集中式MAC地址认证1-4mac-authentication timer 集中式MAC地址认证1-8management-vlan 配置管理VLAN 1-16management-vlan Cluster1-32mdi 端口基本配置1-21memory路由协议5-3memory auto-establish disable 路由协议5-4memory auto-establish enable路由协议5-5A-18H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引messenger AAA-RADIUS-HWTAC ACS-EAD 1-17mirrored-to 镜像1-3mirrored-to 镜像1-11mirroring-group 镜像1-4mirroring-group mirroring-port 镜像1-5mirroring-group monitor-port镜像1-6mirroring-group reflector-port 镜像1-6mirroring-group remote-probe vlan 镜像1-7mirroring-port镜像1-8mirroring-port镜像1-13mkdir SSH终端服务2-9mkdir 文件系统管理1-13mkdir FTP与TFTP 1-21monitor-port 镜像1-9monitor-port 镜像1-14more 文件系统管理1-13move 文件系统管理1-14msdp 组播协议7-6msdp-tracert 组播协议7-7multicast route-limit 组播协议2-4multicast routing-enable 组播协议2-5multicast-source-deny组播协议2-6multicast-suppression 端口基本配置1-22multi-path-number 路由协议3-32Nname VLAN 1-5name AAA-RADIUS-HWTAC ACS-EAD 1-18nas-ip AAA-RADIUS-HWTAC ACS-EAD 1-37nas-ip AAA-RADIUS-HWTAC ACS-EAD 1-62nbns-list DHCP 1-31ndp enable Cluster 1-3A-19H3C S3600系列以太网交换机命令手册-Release 1510附录附录A 命令总索引ndp timer aging Cluster1-4ndp timer hello Cluster1-5netbios-type DHCP1-32network 路由协议2-9network 路由协议3-33network DHCP1-32nm-interface Vlan-interface Cluster 1-33 nslookup type域名解析1-7nssa 路由协议3-34ntdp enable Cluster 1-9ntdp explore Cluster 1-10ntdp hop Cluster 1-10ntdp timer Cluster 1-11ntdp timer hop-delay Cluster 1-12ntdp timer port-delay Cluster 1-13ntp-service access NTP 1-4ntp-service authentication enable NTP 1-5 ntp-service authentication-keyid NTP 1-6 ntp-service broadcast-client NTP 1-7ntp-service broadcast-server NTP 1-7ntp-service in-interface disable NTP 1-8 ntp-service max-dynamic-sessions NTP 1-9 ntp-service multicast-client NTP 1-9ntp-service multicast-server NTP 1-10ntp-service reliable authentication-keyid NTP 1-11 ntp-service source-interface NTP 1-11ntp-service unicast-peer NTP 1-12ntp-service unicast-server NTP 1-13O1-22option 自动侦测open FTP与TFTP1-3option DHCP1-33originating-rp组播协议7-9ospf 路由协议3-35A-20。

MyPower 交换机操作手册_06_网络协议操作

版权所有 2007，迈普（四川）通信技术有限公司，保留所有权利1目录第1章 L3转发配置 ··································································· 1-11.1 三层接口·············································································································· 1-11.1.1 三层接口介绍 ···························································································· 1-1 1.1.2 三层接口配置 ···························································································· 1-1 1.2 IP 配置 ················································································································· 1-2 1.2.1 IPv4、IPv6介绍 ························································································ 1-2 1.2.2 IP 配置 ······································································································· 1-31.2.2.1 IPv4地址配置 ················································································· 1-3 1.2.2.2 IPv6配置 ························································································ 1-4 1.2.3 IP 配置举例 ································································································ 1-81.2.3.1 IPv4典型案例 ················································································· 1-8 1.2.3.2 IPv6典型案例 ···············································································1-10 1.2.4 IPv6排错帮助··························································································1-13 1.3 IP 转发 ···············································································································1-14 1.1.1 IP 转发介绍 ······························································································1-14 1.1.2 IP 路由聚合配置 ······················································································1-14 1.4 URPF ·················································································································1-14 1.4.1 URPF 简介 ······························································································1-14 1.4.2 URPF 配置任务序列 ················································································1-15 1.4.3 URPF 排错帮助 ·······················································································1-16 1.5 ARP ····················································································································1-16 1.5.1 ARP 介绍 ·································································································1-16 1.5.2 ARP 配置 ·································································································1-16 1.5.3 ARP 转发排错帮助 ··················································································1-17第2章 DHCP 配置 ···································································· 2-12.1 DHCP 简介 ·········································································································· 2-1 2.2 DHCP 服务器配置 ······························································································· 2-2 2.3 DHCP 中继配置 ··································································································· 2-4 2.4 DHCP 配置举例 ··································································································· 2-6 2.5 DHCP 排错帮助 ··································································································· 2-9版权所有 2007，迈普（四川）通信技术有限公司，保留所有权利2第3章 SNTP 配置 ····································································· 3-13.1 SNTP 简介 ··········································································································· 3-1 3.2 SNTP 典型配置举例 ···························································································· 3-2第4章防ARP 、ND 欺骗配置 ··················································· 4-14.1 概述 ····················································································································· 4-14.1.1 ARP 欺骗 ··································································································· 4-1 4.1.2交换机如何防ARP/ND 欺骗 ······································································ 4-1 4.2 防ARP 、ND 欺骗配置序列 ················································································ 4-2 4.3 防ARP 、ND 欺骗举例 ························································································ 4-3版权所有 2007，迈普（四川）通信技术有限公司，保留所有权利1-1第1章 L3转发配置交换机支持三层转发功能。

迈普路由器产品手册

迈普路由器产品系列...................................................1 MP8800系列万兆核心路由器..........................................2 MP7500全冗余ATCA核心路由器.....................................3 MP3800系列开放式全业务汇聚路由器.................................4 MP2900系列开放式高速接入路由器....................................5 MP2824系列开放式全业务接入路由器.................................6 MP2800系列增强型宽窄带一体化智能路由器...........................7 MP1800系列3G专业级路由器 .......................................8 MP1800-20 3G无线路由器...........................................9 MP IMR800 3G无线路由器..........................................._ 迈普交换机产品系列 ..................................................1 MyPower S11800系列数据中心级核心交换机...........................2 MyPower S8900系列高性能电信级交换机...............................3 MyPower S6800系列万兆核心路由交换机...............................4 MyPower S6600系列万兆汇聚路由交换机...............................5 MyPower S5800系列数据中心级接入交换机............................6 MyPower S4320系列增强型千兆汇聚路由交换机........................7 MyPower S4300系列增强型千兆汇聚路由交换机........................8 MyPower S4220系列全千兆汇聚路由交换机.............................9 MyPower S4200系列千兆汇聚路由交换机...............................10 MyPower S4100系列电信级智能三层交换机........................11 MyPower S4000系列千兆汇聚路由交换机..........................12 MyPower S3320系列千兆智能型网管交换机........................13 MyPower S3300系列千兆智能网管型交换机........................14 MyPower S3220系列千兆智能网管型交换机........................15 MyPower S3200系列千兆智能网管型交换机........................16 MyPower S3120系列百兆智能网管型交换机........................17 MyPower S3100系列千兆智能网管型交换机.........................18 MyPower S2000系列网管型交换机.................................三、迈普安全产品系列.....................................................1 MPSec MSG4000-X1 安全网关.........................................2 MPSec MSG4000-G6 安全网关.........................................3 MPSec MSG4000-G4 安全网关........................................4 MPSec MSG4000-G2 安全网关.........................................5 MPSec MSG4000-G1 安全网关........................................6 MPSec MSG4000-F6安全网关.........................................7 MPSec VPN3000 系列VPN 网关.......................................8 电子政务外网IPSec VPN网关..........................................9 MPSec ISG1000系列网关.............................................四、迈普应用与服务产品系列..............................................1 Maipu Mico 一体化信息安防系统.......................................2 终端信息安全管理系统.................................................3 MPSec CMS证书管理服务器...........................................4 Maipu AAS迈普接入认证服务器........................................5 Maipu Portal 服务器...................................................6 迈普智能3G综合业务管理平台.........................................7 MS8000系列智能传媒服务器...........................................8 MT1000系列媒体网关.................................................9 迈普网络自动化运维系统..............................................10 Maipu Masterplan迈普统一网络管理平台............................11 Maipu DeviceMaster迈普路由交换设备管理系统.....................12 迈普管理支撑系统.................................................五、迈普无线网络产品系列.................................................1 Masterplan迈普无线有线一体化网管软件...............................2 MyPower WA2000 11n 系列智能AP ................................................................3 MyPower WA2000同频系列无线智能AP ..........................................................4 MyPower WNC6000智能无线控制器....................................5 MyPower WNC6000同频智能无线控制器................................6 MyPower WA1000 11n 系列WLAN CPE 终端 ...........................六、迈普统一通信产品系列 ...............................................1 MyPower VG 6000系列媒体网关......................................2 MyPower VG 2000系列媒体网关......................................3 MyPower VG2000-X系列媒体网关......................................4 MyPower VG 800系列媒体网关 .......................................5 MyPower VG A600系列媒体网关.......................................6 MyPower VEP600系列IP可视电话.....................................7 MyPower VEP310 系列IP 话机........................................8 MyPower VEP300 系列IP 话机........................................9 MyPower UCA个人通信助手...........................................10 MyPower VC8100 IP 通信服务器....................................11 MyPower IP电话会议系统.........................................12 MyPower VC8200协同视频服务器.................................13 MyPower MCC 融信呼.............................................14 迈普MyPower ICR录音软件 .......................................迈普路由器产品系列1 MP880C系列万兆核心路由器1.1 产品概述MP8800系列路由器是迈普通信技术股份有限公司自主研发的，全球第一款采用众核技术的路由器，是基于对行业用户业务应用的充分调研和深刻理解而推出的一款跨时代的万兆级高端骨干核心路由器。

H3C S3600系列以太网交换机命令手册-Release 1602(V1.02) 12-DLDP命令

【举例】 # 全局开启交换机上所有光纤端口的 DLDP 功能。
<Sysname> system-view 1-2

System View: return to User View with Ctrl+Z. [Sysname] dldp enable
# 开启光纤端口 GigabitEthernet1/1/1 的 DLDP 功能。
System View: return to User View with Ctrl+Z. [SwitchB] dldp authentication-mode simple abc
1.1.4 dldp interval
【命令】 dldp interval timer-value undo dldp interval
目录
1 DLDP配置命令 .................................................................................................................................. 1-1 1.1 DLDP配置命令 .................................................................................................................................. 1-1 1.1.1 display dldp............................................................................................................................. 1-1 1.1.2 dldp......................................................................................................................................... 1-2 1.1.3 dldp authentication-mode ....................................................................................................... 1-3 1.1.4 dldp interval ............................................................................................................................ 1-4 1.1.5 dldp reset................................................................................................................................ 1-4 1.1.6 dldp unidirectional-shutdown.................................................................................................. 1-5 1.1.7 dldp work-mode ...................................................................................................................... 1-5 1.1.8 dldp delaydown-timer ............................................................................................................. 1-6

迈普MyPowerS系列以太网交换机配置手册

迈普MyＰｏwer-S系列以太网交换机配置手册————————————————————————————————作者：————————————————————————————————日期:ﻩ目录第1章交换机管理ﻩ错误!未定义书签。

１.1 管理方式.......................................................... 错误!未定义书签。

1.1.1 带外管理............................................................. 错误!未定义书签。

1.１.2 带内管理 ........................................................... 错误!未定义书签。

1.２ＣLI界面ﻩ错误!未定义书签。

1.2.1 配置模式介绍 ..................................................... 错误!未定义书签。

1.2.2 配置语法............................................................. 错误!未定义书签。

1.2.3 支持快捷键ﻩ错误!未定义书签。

１.2.４帮助功能.......................................................... 错误!未定义书签。

１．2.5 对输入的检查 ................................................. 错误!未定义书签。

1.2.6 支持不完全匹配.................................................. 错误!未定义书签。

第2章交换机基本配置ﻩ错误!未定义书签。

2.1 基本配置ﻩ错误!未定义书签。

２.2 远程管理ﻩ错误!未定义书签。

H3C S3600系列以太网交换机操作手册-Release 1602(V1.02) 12-DLDP操作

Recover Probe 报文
用于端口的自动恢复机制，检测链路是否恢复。该报文不携带邻居信息，只携带本端口信息，需要对端以自动恢复应答报文（Recover Echo）作为响应。处于 DLDP Down 的端口每 2 秒发送一次
Recover Echo 报文
对 Recover Probe 报文的应答，用于端口的自动恢复机制。发送 Recover Probe 的端口收到 Recover Echo 报文后，如果发现 RecoverEcho 报文中的邻居信息与本端口相同，则认为链路已经恢复双向连通
DLDP 报文类型
功能
Advertisement 报文
发送 Advertisement 报文的目的是告诉邻居自己的存在，该报文中只有本端口的信息，不需要对方回应报文
RSY-Advertisement 报文（下文称为 Advertisement 报文的一种，报文中 RSY FLAG 标志置位。当本端口没有
制进行物理信号和故障的检测；DLDP 进行对端设备的识别、单向链路的识别和关闭不可达端口等工作。 z 如果两端链路在物理层都能独立正常工作，DLDP 会在链路层检测这些链路是否正确连接、两端是否可以正确的交互报文（这种检测不能通过自动协商机制实现）。
1-1Βιβλιοθήκη z 当端口工作在强制全双工模式和强制速率下时，此时若出现图 1-2所示的情况，则DLDP可以检测出单通故障。
LinkDown 报文
用于知会单向链路的紧急情况（本端口 Down 但对端 Up）。该报文中不带邻居信息，只带本端口信息。在某些情况下，一端的物理层能够发现链路出现了异常，例如端口光纤的 Rx 线中断，但 Tx 线完好，此时本端设备认为该端口物理 Down，但对端则由于物理层能检测 Rx 信号，认为端口的工作状态正常。该情况称为单向链路的紧急情况。

03-配置文件管理操作

配置文件管理目录目录第1章配置文件管理..............................................................................................................1-11.1 配置文件简介.....................................................................................................................1-11.2 配置文件管理.....................................................................................................................1-21.2.1 保存当前配置...........................................................................................................1-21.2.2 清除设备中的配置文件............................................................................................1-41.2.3 设置下次启动时使用的配置文件及其属性...............................................................1-41.2.4 配置文件显示...........................................................................................................1-5第1章配置文件管理1.1 配置文件简介配置文件用来保存用户对以太网交换机进行的配置，记录用户的整个配置过程。

迈普mypowers3000系列以太网交换机配置手册

目录第1章交换机管理 (1)管理方式 (1)带外管理 (1)带内管理 (5)CLI界面 (11)配置模式介绍 (12)配置语法 (14)支持快捷键 (15)帮助功能 (15)对输入的检查 (16)支持不完全匹配 (16)第2章交换机基本配置 (17)基本配置 (17)远程管理 (18)Telnet (18)SSH (19)配置交换机的IP地址 (21)配置交换机的IP地址任务序列 (21)SNMP配置 (23)SNMP介绍 (23)MIB介绍 (24)RMON介绍 (25)SNMP配置 (25)SNMP典型配置举例 (28)SNMP排错帮助 (29)交换机升级 (30)交换机系统文件 (30)BootROM模式升级 (31)FTP/TFTP升级 (33)第3章集群网管配置 (43)集群网管介绍 (43)集群网管基本配置 (43)集群网管举例 (46)集群网管排错帮助 (47)第1章交换机管理1.1管理方式用户购买到交换机设备后，需要对交换机进行配置，从而实现对网络的管理。

交换机为用户提供了两种管理方式：带外管理和带内管理。

1.1.1带外管理带外管理即通过Console进行管理，通常情况下，在首次配置交换机或者无法进行带内管理时，用户会使用带外管理方式。

例如：用户希望通过远程Telnet来访问交换机时，必须首先通过Console给交换机配置一个IP地址。

用户用Console管理的步骤如下：第一、搭建环境：图 1-1 交换机Console管理配置环境按照图 1-1所示，将PC的串口（RS-232接口）和交换机随机提供的串口线连接，下面是连接中用到的设备说明：设备名称说明PC机有完好的键盘和RS-232串口，并且安装了终端仿真程序，如Windows 系统自带超级终端等。

串口线一端与PC机的RS-232串口相连；另一端与交换机的Console相连。

通过串口线连接交换机有完好的Console。

第二、进入超级终端：连接成功后，打开Windows 系统自带超级终端。

MyPower S3100系列以太网交换机安装手册V4.0

H3C S3600系列以太网交换机 操作手册-Release 1602(V1.02) 42-IPv6管理操作

迈普MyPowerS千兆汇聚路由交换机配置手册V操作手册维护与调试操作

h3c s3100-si系列以太网交换机 安装手册

H3C S3100V2系列以太网交换机 安装指导-6W103-整本手册