KRVV0603G270N121T压敏电阻规格书
贴片压敏电阻0603封装参数型号规格书大全
18
45
ESD0402-5R5E220
5.5
45
0402
ESD0402-140E330
14
45
ESD0402-5R5E500
5.5
45
ESD0402-120E101
12
40
ESD0402-120E131
12
40
ESD0402-140E161
14
35
ESD0402-9R0E181
9
30
ESD0402-5R5E481
varistor voltage shall be within 10%.
The temperature cycle of specified Step
Temperature
Period
temperature shall be repeated five times and 1
-40±3℃
30min±3
2010 UN Gorp.
9
Packaging Specification
Carrier tape transparent cover tape should be heat-sealed to carry the products, and the reel should be used to reel the carrier tape.
3
125±2℃
30min±3
mechanical damage shall be examined.
4 Room Temperature 1~2hours
After being continuously applied the maximum allowable voltage at 85℃ for High Temperature Load 1000hours, the specimen shall be stored at room temperature and humidity for one or
国巨压敏电阻产品0402-0603两型号
VR
0402 / 0603
5.5 V to 38 V
CONSTRUCTION Lead Free terminations, NiSn terminations Surface mount multilayer surge suppressor Very short response time (<1.0 nsec) Bidirectional clamping Low capacitance for high frequency applications Very low leakage current
VARISTOR/ MAX. WORKING CLAMPING PEAK LEAKAGE CURRENT BREAKDOWN VOL. VOL.@1A CURRENT R.T. (15~35 °C) VOL. DC @1mA D.C (max.) 8/20 µS (max.) 8/20 µS (max.) Voltage Current
ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP CTC & 12NC All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. YAGEO BRAND ordering code GLOBAL PART NUMBER (PREFERRED )
10 V ~ 14 V 10 V ~ 14 V 10 V ~ 14 V 10 V ~ 14 V 7.2 V ~ 10.8 V 7.2 V ~ 10.8 V 7.2 V ~ 10.8 V 7.2 V ~ 10.8 V 7.2 V ~ 10.8 V 7.2 V ~ 10.8 V 10.8 V ~ 13.2 V 10.2 V ~ 13.8 V 10.2 V ~ 13.8 V 18 V ~ 24 V 18 V ~ 24 V 18 V ~ 24 V 14.4 V ~ 21.6 V 16.2 V ~ 19.8 V 90 V ~ 135 V 50 V ~ 80 V 50 V ~ 80 V 24 V ~ 34 V 24 V ~ 34 V 24 V ~ 34 V 24 V ~ 34 V 24 V ~ 34 V 24 V ~ 34 V 21.6 V ~ 26.4 V 24 V ~ 34 V 27 V ~ 38 V 50 V ~ 80 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 9V 9V 9V 14 V 14 V 14 V 14 V 14 V 18 V 18 V 18 V 18 V 18 V 18 V 18 V 18 V 18 V 18 V 18 V 19 V 30 V 22 V 22 V 22 V 22 V 18 V 18 V 18 V 18 V 18 V 18 V 22 V 22 V 22 V 38 V 38 V 38 V 35 V 33 V 250 V 130 V 130 V 66 V 66 V 66 V 66 V 66 V 66 V 56 V 66 V 60 V 130 V 2A 4A 6A 10 A 10 A 15 A 15 A 20 A 20 A 30 A 6A 6A 15 A 7A 15 A 15 A 20 A 20 A 1A 1A 2A 3A 3A 3A 4A 4A 4A 10 A 15 A 15 A 1A 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 5.5 V 9V 9V 9V 14 V 14 V 14 V 14 V 14 V 18 V 18 V 18 V 18 V 18 V 18 V 18 V 18 V 18 V 18 V 18 V 19 V 18 V 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA 20 µA 20 µA 20 µA 20 µA 20 µA 20 µA 20 µA 20 µA 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA 35 µA 10 µA 4 µA 10 µA
贴片压敏电阻,片式压敏电阻规格大全
MLVKR145Broakdown Voltage Clamping Voltage Surge Current TransientEnergy CapacitanceV RMSV DCV 1mA Vc i maxW maxCp＜10μA ＜10μA 1mA DC 8/20 μs 8/20 μs 10/1000μs 1KHz/1MHz VV V V A J pF Max.Max.Mid.Max.Max.Max.Typical 2.5 3.3 4.712300.25003.0 4.0 5.614300.24003.5 4.5 6.817300.23504.0 5.58.220300.23302.5 3.3 4.712600.216003.0 4.0 5.614600.414003.54.56.817600.412004. 压敏电压误差级别，K ：±10%；M ：±30%；J ：±5%5. 包装方式，R ：编带包装2. 元件英制尺寸，0603对应公制1608，1206对应公制3216…3. 压敏电压值，4R7：4.7V ； 180：18*100；471：47*1010603~2220（英制）电压规格4.7V~470V表示方法尺寸规格多层片式压敏电阻器厂家广州玖冠科技有限公司产品名称0603V4R7231. MLV ：多层片式压敏电阻器MLV0603V8R2KR TypeMLV0603V5R6KR MLV0603V4R7KR Test ConditionUnitsWorking Voltage Symbol MLV0805V4R7KR MLV0805V5R6KR MLV0805V6R8KRMLV0603V6R8KRBroakdown Voltage Clamping voltage Surge current Transientenergy CapacitanceV RMSV DCV 1mA Vc i maxW maxCp＜10μA ＜10μA 1mA DC 8/20 μs 8/20 μs 10/1000 μs 1KHz/1MHzV V V V A J pF Max.Max.Mid.Max.Max.Max.Typical 4.0 5.58.220600.410002.5 3.3 4.7121200.842003.0 4.0 5.6141200.836003.5 4.5 6.8171200.830004.0 5.58.2201200.824002.5 3.3 4.712250 1.565003.0 4.0 5.614250 1.545003.5 4.5 6.817250 1.540004.0 5.58.220250 1.53800691224300.22208111528300.217011141835300.21501216.52240300.212014182445300.211017222750300.210020263360300.28025303972300.27030384785300.260354556100300.250691224600.47008111528600.455011141835600.44601216.52240600.4370MLV0805V150KR MLV0805V180KR MLV0805V220KRMLV0603V220KR MLV0603V240KR MLV0603V270KR MLV0603V390KR MLV0603V470KR MLV0603V560KR MLV0805V120KR MLV0603V330KR UnitsMLV0603V120KR MLV0603V150KR MLV0603V180KR MLV1210V8R2KR MLV1206V8R2KR MLV1210V4R7KR MLV1210V5R6KR MLV1210V6R8KR MLV1206V5R6KR MLV1206V6R8KR Type Symbol MLV1206V4R7KR MLV0805V8R2KR Working Voltage Test ConditionV RMSV DCV 1mA Vci maxW maxCp＜10μA ＜10μA 1mA DC 8/20 μs 8/20 μs 10/1000 μs 1KHz/1MHzV V V V A J pF Max.Max.Mid.Max.Max.Max.Typical 14182445600.434017222750600.430020263360600.425025303972600.421030384785600.4170354556100600.4150405668120600.4120506582150600.4806912241200.8180081115281200.81500111418351200.812001216.522401200.81000141824451200.8900172227501200.8800202633601200.8650253039721200.8550303847851200.84503545561001200.83804056681201200.83205065821501200.8300691224250 1.528008111528250 1.52300111418352501.51900MLV1210V150KR MLV1210V180KRMLV1206V560KR MLV1206V680KR MLV1206V820KR MLV1210V120KR MLV1206V270KR MLV1206V330KR MLV1206V390KR MLV1206V470KR MLV1206V150KR MLV1206V180KR MLV1206V220KR MLV1206V240KR MLV0805V560KR MLV0805V680KR MLV0805V820KR MLV1206V120KR MLV0805V270KR MLV0805V330KR MLV0805V390KR MLV0805V470KR MLV0805V240KR Symbol Test ConditionUnitsV RMSV DCV 1mA Vci maxW maxCp＜10μA ＜10μA 1mA DC 8/20 μs 8/20 μs 10/1000 μs 1KHz/1MHzV V V V A J pF Max.Max.Mid.Max.Max.Max.Typical 1216.52240250 1.5155014182445250 1.5140017222750250 1.5125020263360250 1.5100025303972250 1.585030384785250 1.5700354556100250 1.5600405668120250 1.5500506582150250 1.54006912248004.0800081115288004.06400111418358004.053001216.522408004.04350141824458004.04000172227508004.0620202633608004.0600253039728004.0570303847858004.05503545561008004.04604056681208004.04105065821508004.038069122412008.01300811152812008.030000Symbol MLV2220V150KRMLV1812V560KR MLV1812V680KR MLV1812V820KR MLV2220V120KR MLV1812V270KR MLV1812V330KR MLV1812V390KR MLV1812V470KR MLV1812V150KR MLV1812V180KR MLV1812V220KR MLV1812V240KR MLV1210V560KR MLV1210V680KR MLV1210V820KR MLV1812V120KR MLV1210V270KR MLV1210V330KR MLV1210V390KR MLV1210V470KR MLV1210V220KR MLV1210V240KR Test ConditionUnitsV RMSV DCV 1mA Vci maxW maxCp＜10μA ＜10μA 1mA DC 8/20 μs 8/20 μs 10/1000 μs 1KHz/1MHzV V V V A J pF Max.Max.Mid.Max.Max.Max.Typical 1114183512008.025*******.5224012008.0205001418244512008.0185001722275012008.0165002026336012008.0135002530397212008.0115003038478512008.0950035455610012008.0710040566812012008.0580050658215012008.0480060851001751200.8220751001202101200.8180951251502601200.81506085100175250 1.535075100120210250 1.529095125150260250 1.52306085100175800 4.075075100120210800 4.065095125150260800 4.0520115150180315800 4.0430140180220380800 4.0350608510017512008.09407510012021012008.0780Symbol Test ConditionUnitsMLV2220V121KRMLV1812V151KR MLV1812V181KR MLV1812V221KR MLV2220V101KR MLV1210V121KR MLV1210V151KR MLV1812V101KR MLV1812V121KR MLV1206V101KR MLV1206V121KR MLV1206V151KR MLV1210V101KR MLV2220V560KR MLV2220V180KR MLV2220V220KR MLV2220V240KR MLV2220V680KR MLV2220V820KR MLV2220V270KR MLV2220V330KR MLV2220V390KR MLV2220V470KRV RMSV DCV 1mA Vci maxW maxCp＜10μA ＜10μA 1mA DC 8/20 μs 8/20 μs 10/1000 μs 1KHz/1MHzV V V V A J pF Max.Max.Mid.Max.Max.Max.Typical 9512515026012008.063011515018031512008.052014018022038012008.043015020024041512008.039017522527047512008.035021027533058012008.028025032039067512008.024030038047081012008.0200MLV2220V471KRMLV2220V241KR MLV2220V271KR MLV2220V331KR MLV2220V391KR MLV2220V151KR MLV2220V181KR MLV2220V221KR Symbol Test ConditionUnits。
压敏电阻型号及选用方法
压敏电阻的型号及选用方法SJ1152-82部颁标准中压敏电阻器的型号命名分为四部分，各部分的含义见表1。
表1 压敏电阻器的型号命名及含义第一部分用字母“M” 表示主称为敏感电阻器。
第二部分用字母“Y” 表示敏感电阻器为压敏电阻器。
第三部分用字母表示压敏电阻器的用途的特征。
第四部分用数字表示序号，有的在序号的后面还标有标称电压、通流容量或电阻体直径、电压误差、标称电压等。
例如：MYL1-1（防雷用压敏电阻器）MY31-270/3（270V/3kA普通压敏电阻器）M——敏感电阻器M——敏感电阻器Y——压敏电阻器Y——压敏电阻器L——防雷用31——序号1-1——序号270——标称电压为270V3——通流容量为3kA压敏电阻型号及参数详细信息：压敏电阻是一种以氧化锌为主要成份的金属氧化物半导体非线性电阻元件；电阻对电压较敏感，当电压达到一定数值时，电阻迅速导通。
由于压敏电阻具有良好的非线特性、通流量大、残压水平低、动作快和无续流等特点。
被广泛应用于电子设备防雷。
主要参数：1、残压：压敏电阻在通过规定波形的大电流时其两端出现的最高峰值电压。
2、通流容量：按规定时间间隔与次数在压敏电阻上施加规定波形电流后，压敏电阻参考电压的变化率仍在规定范围内所能通过的最大电流幅值。
3、泄漏电流：在参考电压的作用下，压敏电阻中流过的电流。
4、额定工作电压：允许长期连续施加在压敏电阻两端的工频电压的有效值。
而压敏电阻在吸收暂态过电压能量后自身温度升高，在此电压下能正常冷却，不会发热损坏。
压敏电阻的不足：（1）寄生电容大压敏电阻具有较大的寄生电容，一般在几百至几千微微法的范围。
在高频信号系统中会引起高频信号传输畸变，从而引起系统正常运行。
（2）泄漏电流的存在压敏电阻的泄漏电流指标既关系到被保护电子系统的正常运行，又关系到压敏电阻自身的老化和使用寿命。
压敏电阻的损坏形式：（1）当压敏电阻在抑制暂态过电压时能量超过其额定容量时，压敏电阻会因过热而损坏，主要表现为短路、开路。
压敏电阻10D封装参数型号规格书大全
General Characteristics
Material
No Radioactive Material
Operating Temperature -55~85ºC
18(15~21.6) 22(19.5~26) 27(24~30) 33(29.5~36.5) 39(35~43) 47(42~54) 56(50~62) 68(61~75) 82(74~90) 100(90~110) 120(108~132) 150(135~165) 180(162~198) 200(180~220) 220(198~242) 240(216~264) 270(243~297) 300(270~330) 330(297~363) 360(324~396) 390(351~429) 430(387~473 470(423~517) 510(459~561) 560(504~616) 620(558~682) 680(612~748) 750(675~825) 780(702~858) 820(738~902) 910(819~1001) 1000(900~1100) 1100(990~1210) 1800(1620~1980)
3.0 5.0 6.0 7.0 9.0 11.0 13.0 15.0 17.0 18.0 21.0 25.0 30.0 35.0 39.0 42.0 49.0 54.0 58.0 65.0 70.0 80.0 85.0 90.0 92.0 95.0 98.0 100.0 105.0 110.0 130.0 140.0 155.0 250.0
压敏电阻参数详解及设计指南
关于压敏电阻的正确使用一、压敏电阻的原理压敏电阻意思是"在一定电流电压范围内电阻值随电压而变"，或者是说"电阻值对电压敏感"的阻器。
相应的英文名称叫“Voltage Dependent Resistor”简写为“VDR”。
随着加在它上面的电压不断增大，它的电阻值可以从MΩ（兆欧）级变到mΩ（毫欧）级。
当电压较低时，压敏电阻工作于漏电流区，呈现很大的电阻，漏电流很小；当电压升高进入非线性区后，电流在相当大的范围内变化时，电压变化不大，呈现较好的限压特性；电压再升高，压敏电阻进入饱和区，呈现一个很小的线性电阻，由于电流很大，时间一长就会使压敏电阻过热烧毁甚至炸裂。
正常使用时压敏电阻处于漏电流区，受到浪涌冲击时进入非线性区泄放浪涌电流，一般不能进入饱和区压敏电阻器的电阻体材料是半导体，所以它是半导体电阻器的一个品种。
现在大量使用的"氧化锌"（ZnO）压敏电阻器，它的主体材料有二价元素（Zn）和六价元素氧（O）所构成。
所以从材料的角度来看，氧化锌压敏电阻器是一种“Ⅱ-Ⅵ族氧化物半导体”。
二、压敏电阻的作用压敏电阻的最大特点是当加在它上面的电压低于它的阀值"UN"时，流过它的电流极小，相当于一只关死的阀门，当电压超过UN时，流过它的电流激增，相当于阀门打开。
利用这一功能，可以抑制电路中经常出现的异常过电压，保护电路免受过电压的损害。
压敏电阻器是一种具有瞬态电压抑制功能的元件，可以用来代替瞬态抑制二极管、齐纳二极管和电容器的组合。
压敏电阻器可以对IC 及其它设备的电路进行保护，防止因静电放电、浪涌及其它瞬态电流（如雷击等）而造成对它们的损坏。
使用时只需将压敏电阻器并接于被保护的IC 或设备电路上，当电压瞬间高于某一数值时，压敏电阻器阻值迅速下降，导通大电流，从而保护IC 或电器设备；当电压低于压敏电阻器工作电压值时，压敏电阻器阻值极高，近乎开路，因而不会影响器件或电器设备的正常工作。
压敏电阻参数详解及设计指南
压敏电阻参数详解及设计指南关于压敏电阻的正确使用一、压敏电阻的原理压敏电阻意思是"在一定电流电压范围内电阻值随电压而变"，或者是说"电阻值对电压敏感"的阻器。
相应的英文名称叫“V oltage Dependent Resistor”简写为“VDR”。
随着加在它上面的电压不断增大，它的电阻值可以从MΩ（兆欧）级变到mΩ（毫欧）级。
当电压较低时，压敏电阻工作于漏电流区，呈现很大的电阻，漏电流很小；当电压升高进入非线性区后，电流在相当大的范围内变化时，电压变化不大，呈现较好的限压特性；电压再升高，压敏电阻进入饱和区，呈现一个很小的线性电阻，由于电流很大，时间一长就会使压敏电阻过热烧毁甚至炸裂。
正常使用时压敏电阻处于漏电流区，受到浪涌冲击时进入非线性区泄放浪涌电流，一般不能进入饱和区压敏电阻器的电阻体材料是半导体，所以它是半导体电阻器的一个品种。
现在大量使用的"氧化锌"（ZnO）压敏电阻器，它的主体材料有二价元素（Zn）和六价元素氧（O）所构成。
所以从材料的角度来看，氧化锌压敏电阻器是一种“Ⅱ-Ⅵ族氧化物半导体”。
二、压敏电阻的作用压敏电阻的最大特点是当加在它上面的电压低于它的阀值"UN"时，流过它的电流极小，相当于一只关死的阀门，当电压超过UN时，流过它的电流激增，相当于阀门打开。
利用这一功能，可以抑制电路中经常出现的异常过电压，保护电路免受过电压的损害。
压敏电阻器是一种具有瞬态电压抑制功能的元件，可以用来代替瞬态抑制二极管、齐纳二极管和电容器的组合。
压敏电阻器可以对IC 及其它设备的电路进行保护，防止因静电放电、浪涌及其它瞬态电流（如雷击等）而造成对它们的损坏。
使用时只需将压敏电阻器并接于被保护的IC 或设备电路上，当电压瞬间高于某一数值时，压敏电阻器阻值迅速下降，导通大电流，从而保护IC 或电器设备；当电压低于压敏电阻器工作电压值时，压敏电阻器阻值极高，近乎开路，因而不会影响器件或电器设备的正常工作。
压敏电阻常用型号及参数
压敏电阻常用型号及参数压敏电阻是一种电阻器件，其电阻值会随着外加电压的变化而变化。
由于其具有良好的电压响应特性，常被用于电路中的过压保护、电源滤波和信号调节等方面。
下面将介绍一些常用的压敏电阻型号及其参数。
1.NTC压敏电阻：NTC（Negative Temperature Coefficient）压敏电阻的电阻值会随着温度的升高而降低。
其常用型号有：-10D-9型：电阻值范围为10Ω~1MΩ，额定功率为0.15W~0.5W，最大工作电流为5A，最大工作电压为250V。
-10D-11型：电阻值范围为10Ω~10MΩ，额定功率为0.15W~0.5W，最大工作电流为3A，最大工作电压为600V。
2.PTC压敏电阻：PTC（Positive Temperature Coefficient）压敏电阻的电阻值会随着温度的升高而增加。
其常用型号有：-15D-11型：电阻值范围为1Ω~100KΩ，额定功率为0.4W~0.6W，最大工作电流为10A，最大工作电压为260V。
-15D-22型：电阻值范围为10Ω~100KΩ，额定功率为0.4W~0.6W，最大工作电流为10A，最大工作电压为600V。
3.SMD压敏电阻：SMD（Surface Mount Device）压敏电阻通常采用贴片封装，适用于表面贴装技术。
- 0603型：尺寸为1.6mm×0.8mm×0.8mm，电阻值范围为1Ω~10MΩ，额定功率为0.05W~0.1W，最大工作电流为100mA，最大工作电压为50V。
- 0805型：尺寸为2.0mm×1.25mm×0.8mm，电阻值范围为1Ω~10MΩ，额定功率为0.1W~0.5W，最大工作电流为200mA，最大工作电压为100V。
需要注意的是，以上仅列举了部分常见的压敏电阻型号及参数，实际应用中还有更多的型号和规格可供选择。
在选择压敏电阻时，应根据具体的应用需求综合考虑电阻值范围、额定功率、工作电流和工作电压等参数，以确保电路性能的稳定和可靠。
贴片压敏电阻TG0603型号参数规格书
FeaturesApplicationsRevision:18-Jul-160603 SeriesVaristor voltage from 3.3V to 47V Fast response time ( )Low leakage current High transient curent capability Low clamping voltageWide operating temperature range from -40~85Meet IEC 61000-4-2/-5 level standarduuu uu u u uFor Mother Board and Notebook,Cellular Phone,handheld device,CMO S ,MO S FET,EFT etcDimensionsUnit: mm<1nS℃Compact size for ELA 0603uPart Number CodeTG 0603TERGY LOGO___________ML 080MChip Size (EIA):0603Type ML:Multilayer VaristorVaristor Voltage:Value-080=08X100=8V Varistor Voltage Tolerance:M:±20%;L:±15%;K:±10%Electriacl CharacteristicsRevision:18-Jul-16Surge Current Standard Waveform 0603 SeriesIEC61000-4-5 StandardsT1T2SEVERITY LEVELT1 T2 1 8 uS 20 uS 210 uS1000 uS8/20µs waveform currentOperating Temperature -40 ~ +85ºC Storage Temperature -40 ~ +125ºC Response Time <1 nsSolderability245±5ºC, 3±1sec Solder leach resistance 260±5ºC, 10±1sec Storage Temperature 5 ~ 40ºC Relative Humidity To 65% Taping Package Storage ConditionStorage Time12 Months maxGeneral Technical Data0603 SeriesRevision:18-Jul-16Environmental Reliability TestingCharacteristicTest method and descriptionHigh Temperature Storage The specimen shall be subjected to 125℃ for 1000 hours in a thermostatic bath withoutload and then stored at room temperature and humidity for 1 to 2 hours. The change ofvaristor voltage shall be within 10%.Step Temperature Period 1 -40±3℃30min ±3 2 Room Temperature 1~2hours3 125±2℃30min ±3Temperature CycleThe temperature cycle of specified temperature shall be repeated five times and then stored atroom temperature and humidity for one two hours. The change of varistor voltage shall be within 10%and mechanical damage shall be examined.4Room Temperature 1~2hoursHigh Temperature LoadAfter being continuously applied the maximum allowable voltage at 85℃ for 1000hours, the specimen shall be stored at room temperature and humidity for one or hours, the change of varistor voltage shall be within 10%.Damp Heat Load/Humidity LoadThe specimen should be subjected to 40℃,90 to 95%RH environment, and the maximum allowable voltage applied for 1000 hours, then stored at room temperature and humidity for one or two hours. The change of varistor voltage shall be within 10%.Low Temperature Storage The specimen should be subjected to -40℃, without load for 1000 hours and thenstored at room temperature for one two hours. The change of varistor voltage shall bewithin 10%.Recommended Soldering ConditionsNote that this product will be easily damaged by rapid heating, rapid cooling or local heating.Do not give heat shock over 100°C in the process of soldering. We recommend to take preheating and gradual coolingSoldering gun procedureNote the follows, in case of using solder gun for replacement. 1) The tip temperature must be less than 280 for the period within 3 seconds by using soldering gun under 30W2) The soldering gun tip shall not touch this product directly.Soldering volumeNote that excess of soldering volume will easily get crack the body of this product.Revision:18-Jul-160603 Series◆Carrier tape transparent cover tape should be heat-sealed to carry the products,and the reel should be used to reel the carrier tape.◆The adhesion of the heat-sealed cover tape shall be 40﹢20/﹣15grams.◆Both the head and the end portion of taping shall be empty for reel package and SMT auto-pickup machine.And a normal paper tape shall be connected in the head of taping for the operator handle.type A 0±0.10B 0±0.10K 0±0.10T ±0.05T 2±0.05D 0+0.10D 1±0.05P 1±0.10P 2±0.05P 0±0.05W ±0.20 E ±0.10 F ±0.050402 1.08 1.88 1.04 0.22 0.87 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 0603 1.08 1.88 1.04 0.22 1.17 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 0805 1.42 2.30 1.04 0.22 1.26 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1206 1.88 3.50 1.27 0.20 1.49 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1210 2.18 3.46 1.45 0.22 1.77 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1812 3.66 4.95 1.74 0.25 1.99 1.50 1.50 8.00 2.00 4.00 12.00 1.75 5.50 2220 5.10 5.97 2.80 0.25 3.05 1.50 1.50 8.00 2.00 4.00 12.00 1.75 5.50 32205.50 8.50 2.80 0.30 3.50 1.50 1.50 8.00 2.00 4.00 16.00 1.757.50Packaging Dementions Unit:MillimetersReel DimensionsUnit:MillimetersType A B C D E W W 10402~1210178±160±0.513±0.221±0.22±0.59±0.5 1.5±0.151812~3220178±160±0.513.5±0.221±0.22±0.513.6±0.51.5±0.15Type 04020603080512061210181222203220Quantity100004000400030003000100010001000Packing Quantity。
国巨电阻规格书
Product specification – August 29, 2014 V.0
Product specification
2
10
Chip Resistor Surface Mount
RC_L
SERIES
0075 to 2512
SCOPE This specification describes RC series chip resistors with lead free terminations made by thick film process. APPLICATIONS All general purpose application
W (mm)
0.15±0.01 0.20±0.02 0.30±0.03 0.50±0.05 0.80±0.10 1.25±0.10 1.60±0.10 2.60±0.15 4.60±0.10 2.50±0.15 3.10±0.15 3.10±0.15
H (mm)
0.10±0.01 0.13±0.02 0.23±0.03 0.35±0.05 0.45±0.10 0.50±0.10 0.55±0.10 0.50±0.10 0.55±0.10 0.55±0.10 0.55±0.10 0.55±0.10
(7) DEFAULT CODE
Letter L is the system default code for ordering only. (Note)
ORDERING EXAMPLE The ordering code for a RC0402 0.0625W chip resistor value 100K Ωwith ± 5% tolerance, supplied in 7-inch tape reel of 10,000 units per reel is: RC0402JR-07100KL.
贴片压敏电阻TG1206型号参数规格书
FeaturesApplicationsRevision:18-Jul-161206 SeriesVaristor voltage from 5V to 100V Fast response time ( )Low leakage current High transient curent capability Low clamping voltageWide operating temperature range from -40~85Meet IEC 61000-4-2/-5 level standarduuu uu u u uFor Mother Board and Notebook,Cellular Phone,handheld device,CMO S ,MO S FET,EFT etcDimensionsUnit: mm<1nS℃Compact size for ELA 1206uPart Number CodeTG 1206TERGY LOGO___________ML 080MChip Size (EIA):1206Type ML:Multilayer VaristorVaristor Voltage:Value-080=08X100=8V Varistor Voltage Tolerance:M:±20%;L:±15%;K:±10%Electriacl CharacteristicsRevision:18-Jul-16Surge Current Standard Waveform 1206 SeriesIEC61000-4-5 StandardsT1T2SEVERITY LEVELT1 T2 1 8 uS 20 uS 210 uS1000 uS8/20µs waveform currentOperating Temperature -40 ~ +85ºC Storage Temperature -40 ~ +125ºC Response Time <1 nsSolderability245±5ºC, 3±1sec Solder leach resistance 260±5ºC, 10±1sec Storage Temperature 5 ~ 40ºC Relative Humidity To 65% Taping Package Storage ConditionStorage Time12 Months maxGeneral Technical Data1206 SeriesRevision:18-Jul-16Environmental Reliability TestingCharacteristicTest method and descriptionHigh Temperature Storage The specimen shall be subjected to 125℃ for 1000 hours in a thermostatic bath withoutload and then stored at room temperature and humidity for 1 to 2 hours. The change ofvaristor voltage shall be within 10%.Step Temperature Period 1 -40±3℃30min ±3 2 Room Temperature 1~2hours3 125±2℃30min ±3Temperature CycleThe temperature cycle of specified temperature shall be repeated five times and then stored atroom temperature and humidity for one two hours. The change of varistor voltage shall be within 10%and mechanical damage shall be examined.4Room Temperature 1~2hoursHigh Temperature LoadAfter being continuously applied the maximum allowable voltage at 85℃ for 1000hours, the specimen shall be stored at room temperature and humidity for one or hours, the change of varistor voltage shall be within 10%.Damp Heat Load/Humidity LoadThe specimen should be subjected to 40℃,90 to 95%RH environment, and the maximum allowable voltage applied for 1000 hours, then stored at room temperature and humidity for one or two hours. The change of varistor voltage shall be within 10%.Low Temperature Storage The specimen should be subjected to -40℃, without load for 1000 hours and thenstored at room temperature for one two hours. The change of varistor voltage shall bewithin 10%.Recommended Soldering ConditionsNote that this product will be easily damaged by rapid heating, rapid cooling or local heating.Do not give heat shock over 100°C in the process of soldering. We recommend to take preheating and gradual coolingSoldering gun procedureNote the follows, in case of using solder gun for replacement. 1) The tip temperature must be less than 280 for the period within 3 seconds by using soldering gun under 30W2) The soldering gun tip shall not touch this product directly.Soldering volumeNote that excess of soldering volume will easily get crack the body of this product.Revision:18-Jul-161206 Series◆Carrier tape transparent cover tape should be heat-sealed to carry the products,and the reel should be used to reel the carrier tape.◆The adhesion of the heat-sealed cover tape shall be 40﹢20/﹣15grams.◆Both the head and the end portion of taping shall be empty for reel package and SMT auto-pickup machine.And a normal paper tape shall be connected in the head of taping for the operator handle.type A 0±0.10B 0±0.10K 0±0.10T ±0.05T 2±0.05D 0+0.10D 1±0.05P 1±0.10P 2±0.05P 0±0.05W ±0.20 E ±0.10 F ±0.050402 1.08 1.88 1.04 0.22 0.87 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 0603 1.08 1.88 1.04 0.22 1.17 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 0805 1.42 2.30 1.04 0.22 1.26 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1206 1.88 3.50 1.27 0.20 1.49 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1210 2.18 3.46 1.45 0.22 1.77 1.50 1.00 4.00 2.00 4.00 8.00 1.75 3.50 1812 3.66 4.95 1.74 0.25 1.99 1.50 1.50 8.00 2.00 4.00 12.00 1.75 5.50 2220 5.10 5.97 2.80 0.25 3.05 1.50 1.50 8.00 2.00 4.00 12.00 1.75 5.50 32205.50 8.50 2.80 0.30 3.50 1.50 1.50 8.00 2.00 4.00 16.00 1.757.50Packaging Dementions Unit:MillimetersReel DimensionsUnit:MillimetersType A B C D E W W 10402~1210178±160±0.513±0.221±0.22±0.59±0.5 1.5±0.151812~3220178±160±0.513.5±0.221±0.22±0.513.6±0.51.5±0.15Type 04020603080512061210181222203220Quantity100004000400030003000100010001000Packing Quantity。
GRACEKRVVVaristor压敏电阻规格书
4 5.6
12 ±10%
KRVV0403G120N201T
4 5.6
12 ±10%
KRVV0402G120N361T
4 5.6
12 ±10%
KRVV0403G120N481T
4 5.6
12 ±10%
KRVV0603G5R0NXT
2.5 3.3
5 ±10%
KRVV0603G8R0NXT
4 5.6
8 ±10%
Peak current 8/20μs
Capacitance @ 1kHz
Vc(V)
ET(J)
Ip(A)
C(pF)
KRVV1206G8R0NXT
4 5.6
8 ±10%
15.5
0.02
100
1500
KRVV1206G120NXT
6
8
12 ±10%
25
0.02
100
1300
KRVV1206G180NXT
35
45
56 ±10%
Notes:
1.Typical leakage at 25℃<50uA, maximum leakage 100uA。
Clamping Transient Peak Capacitance
voltage energy current
8/20 μs 1A 10/100μs 8/20μs
2 . Size
Model 0402(1005) 0603(1608) 0805(2012) 1206(3216) 1210(3225) 1812(4532) 2220(5650) 3220(08CL) 4032(10CL) 4840(12CL)
Length(L) 1.00±0.20 1.60±0.20 2.00±0.20 3.20±0.20 3.20±0.20 4.50±0.20 5.60±0.20 8.00±0.30 10.0±0.30 12.0±0.30
压敏电阻系列规格书
厦门昱电电子有限公司
规格承认书
产品名称：氧化锌压敏电阻器（陕西华星）
一、特点与用途
压敏电阻器是以氧化锌为主要原材料制造的半导体陶瓷元件，其电阻值随施加电压的变化而呈非线形变化。
具有体积小、通流量大等特点。
主要用于半导体器件保护、家用电器浪涌过电压保护、通信、测量仪器的过电压保护。
二、命名方法
MY G 20 G07 K 471
压敏电压
电压允许误差（±10%）
芯片直径
20系列
G型压敏电阻器
三、技术参数
注：1. 标准品05K 系列压敏电压在0.1mA 电压下测量，07K 、10K 、14K 、20K 系列压敏电压在1mA 电压下测量。
2. 05K 、07K 、10K 、14K 、20K 分别代表瓷片直径为 φ5mm 、φ7mm 、φ10mm 、 φ14mm 、φ20mm 。
3. K 代表压敏电压±10%，后面三位数字中个位数字代表0的个数。
四、外形尺寸
φ5系列
φ7系列
五、产品取得认证。
国巨压敏电阻产品0402-0603两型号
terminations Ni/Sn glass layer
electrodes Ag/Pd
YNM0042
ceramic material ZnO
Fig. 1 Cross-section of a multilayer capacitor
DIMENSION
Table 1 For outlines see fig. 2 TYPE 0402 0603 L1 (mm)
1.0 ± 0.10 1.6 ± 0.15
OUTLINES T (MM)
0.5 ± 0.10 0.8 ± 0.10
W (mm)
0.5 ± 0.10 0.8 ± 0.15
L2 / L3 (mm) min. max.
0.15 0.20 0.30 0.60
L4 (mm) min.
0.40 0.40
For dimension see Table 1
2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 55R = 55 x 10-1 = 5.5 V, 380 = 38 x 101 = 38 V
DATA SHEET
SURFACE-MOUNT CERAMIC MULTILAYER CHIP VARISTORS
VRS0402/0603
5.5 V TO 38 V
RoHS compliant & Halogen Free
Product Specification – Aug. 14, 2014 V.7
VR
0603超小尺寸压敏电阻 - Sunlord Electronics
EXPERT IN PASSIVE PARTS0603超小尺寸压敏电阻超小尺寸，适用高密度设计高性能，优良的ESD抑制能力2011.8EXPERT IN PASSIVE PARTS 目录0603压敏电阻基本特性超小尺寸适合高密度封装高性能，优良的ESD抑制能力0603压敏电阻描述产品编号参数描述性能范围和型号对照0603压敏在电路中的应用如何选择压敏电阻器0603压敏电阻的应用手机中的应用1/11EXPERT IN PASSIVE PARTS2/11由于整机的小型化、多功能化，要求电子元件也小型化，例如高端智能手机、耳机、话筒、数据卡等产品都趋向于使用更小尺寸的被动器件。
针对这种需求，我司推出0603（0201）尺寸的压敏电阻，相比1005(0402)尺寸，可以有效减小PCB 占用面积，进一步实现整机小型化。
超小尺寸适合高密度封装78.4640.3±0.050.3±0.050.6±0.05SDV0603//0.5±0.150.5±0.151.0±0.15SDV1005体积缩小率（%）面积缩小率（%）T （mm ）W （mm ）L （mm ）型号EXPERT IN PASSIVE PARTS3/11高性能，优良的ESD 抑制能力SDV0603压敏电阻电性能（与SDV1005比较）158331~3826SDV1005158331~3826SDV06032405~1022~2818SDV10051405~1022~2818SDV060312400.5~2100~16026SDV100512400.5~2100~16014SDV06033~102012~5011~169SDV10051~52012~5011~169SDV06033~101812~5010~145.5SDV10051~51812~5010~145.5SDV0603Peak Current 8/20μS （A ）Max. Clamping Voltage (V)Cp(pF) @ 1MHz V1mA (V)Max. Vdc (V)型号EXPERT IN PASSIVE PARTS4/11高性能，优良的ESD 抑制能力SDV0603压敏电阻电性能（与同行型号比较）//0.6~0.95.85.0（Fwd ）SESD0201TYCO （TVS ）1015.6308.56（Fwd ）SP1005-01W Littefuse （TVS ）13918125.5CT0201S EPCOS 1~5/8.5~1806.8~273.7~16EZJPZV Panasonic 1~1014~2325~706.8~123.5~7.5AVRM0603TDK //4~7012.8~255.5～10AVLC-01AMOTECH 1~518～580.5~5010~385.5～26SDV0603SUNLORD Peak Current 8/20μS （A ）Max. Clamping Voltage (V)Cp(pF) @ 1MHZ V 1mA (V)Max. Vdc (V)型号公司EXPERT IN PASSIVE PARTS 目录0603压敏电阻基本特性超小尺寸适合高密度封装高性能，优良的ESD抑制能力0603压敏电阻描述产品编号参数描述性能范围和型号对照0603压敏在电路中的应用如何选择压敏电阻器0603压敏电阻的应用手机中的应用5/11EXPERT IN PASSIVE PARTS6/11SDV 0603E090 C150 N PT F ①②③④⑤⑥⑦⑧⑨产品编号②尺寸代号(L ×W) (mm)0603 [0201] 0.6×0.3①类型SDV 片式压敏电阻器④最大直流工作电压Example Nominal Value 5R5 5.5V 090 9V⑧包装T 盘装⑤电容@1MHzExample Nominal Value C150 15pF C151 150pF⑥电容公差N ±30%Y +100/-50%G Maximum ③特征代号A 过电压用E ESD 防护用H 高速信号线用S 特殊要求⑦端头代号P Ni, Sn 电镀⑨无有害物质产品FEXPERT IN PASSIVE PARTS7/11参数描述V DC 直流工作电压（使用参数）压敏电阻器在最高操作温度下使用时的最大持续直流工作电压,被用来作为测试漏电流的对应电压点. 该电压总是比压敏电压小. V AC 交流工作电压（使用参数）压敏电阻器在最高操作温度下使用时的最大持续正弦交流工作电压。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
AC
DC
Breakdown voltage @1mA DC
VRMS(V) VDC(V)
VB(V)
Clamping voltage 8/20 μs 1A
Vc(V)
Transient energy 10/100μs
ET(J)
Peak current 8/20μs
Ip(A)
Capacitance @ 1kHz C(pF)
100
120 ±10%
250
2.50
800
800
Notes:
1.Typical leakage at 25℃<50uA, maximum leakage 100uA。
2.In order to satisfy the applications of customer in various fields, the capacitance range can be designed during manufacturing
81
1.00
200
600
KRVV1210G560NXT
35
45
56 ±10%
110
2.00
250
500
KRVV1210G680NXT
40
56
68 ±10%
120
2.00
250
400
KRVV1210G101NXT
60
85
100 ±10%
165
2.50
200
300
KRVV1812G240NXT
14
18
24 ±10%
□ Fast response（≤1ns）
□ High transient current capability
□ Low leakage current
Working
Breakdown
Varistor Part number
voltage
AC
DC
voltage @1mA DC
VRMS(V) VDC(V)
⑦package：T: taping B: bulk
2 . Size
Model 0402(1005) 0603(1608) 0805(2012) 1206(3216) 1210(3225) 1812(4532) 2220(5650) 3220(08CL) 4032(10CL) 4840(12CL)
KRVV1206G8R0NXT
4 5.6
8 ±10%
15.5
0.02
100
1500
KRVV1206G120NXT
6
8
12 ±10%
25
0.02
100
1300
KRVV1206G180NXT
11
14
18 ±10%
35
0.02
100
1200
KRVV1206G240NXT
14
18
24 ±10%
45
0.02
100
Varistor Part number
Working voltage
AC
DC
VRMS(V) VDC(V)
KRVV2220G240NXT KRVV2220G330NXT KRVV2220G390NXT KRVV2220G470NXT KRVV2220G560NXT KRVV2220G121NXT KRVV3220G121NXT KRVV3220G241NXT KRVV3220G271NXT KRVV3220G391NXT KRVV3220G431NXT KRVV3220G471NXT KRVV4032G121NXT KRVV4032G391NXT KRVV4032G431NXT KRVV4032G471NXT KRVV4840G121NXT KRVV4840G391NXT KRVV4840G431NXT KRVV4840G471NXT
4 5.6
8 ±10%
15.5
0.10
30
1200
KRVV0805G120NXT
6
8
12 ±10%
25
0.10
30
900
KRVV0805G180NXT
11
14
18 ±10%
35
0.10
40
800
KRVV0805G240NXT
14
18
24 ±10%
45
0.20
40
600
KRVV0805G270NXT
17
180
780
KRVV1210G8R0NXT
4 5.6
8 ±10%
15.5
0.50
100
1600
KRVV1210G120NXT
6
8
12 ±10%
25
0.50
100
1600
KRVV1210G180NXT
11
14
18 ±10%
35
1.00
200
1500
KRVV1210G240NXT
14
18
24 ±10%
45
KRVV 1206 G 8R0 N X T
①
② ③④ ⑤ ⑥⑦
①production series：
Varistor
②size：1206(3216)
③type：G:general ; E：ESD ; H：high energy
④Varistor voltage (V1mA): 390=39V，8R0=8.0V ⑤end termination: S: Ag/Pd N: Ag/Ni/Sn
□ Wide operating temperature ：﹣55℃ to﹢125℃
□ Fast response（≤1ns）
□ High transient current capability
□ Low leakage current
Varistor Part number
Working voltage
Length(L) 1.00±0.20 1.60±0.20 2.00±0.20 3.20±0.20 3.20±0.20 4.50±0.20 5.60±0.20 8.00±0.30 10.0±0.30 12.0±0.30
Width(W) 0.50±0.20 0.80±0.20 1.20±0.20 1.60±0.20 2.50±0.20 3.20±0.20 5.00±0.20 5.00±0.30 8.00±0.30 10.0±0.30
80
KRVV0402G120N121T
4 5.6
12 ±10%
55
0.05
10
120
KRVV0403G120N201T
4 5.6
12 ±10%
20
0.03
10
200
KRVV04±10%
55
0.05
10
360
KRVV0403G120N481T
4 5.6
12 ±10%
6.4
9
14 ±10%
26
0.20
30
820
KRVV0603G270N121T
14
18
27 ±10%
40
0.20
30
120
KRVV0603G270N251T
14
18
27 ±10%
40
0.20
30
250
KRVV0603G330N121T
18
26
33 ±10%
58
0.10
30
120
KRVV0805G8R0NXT
56 ±10%
90
0.20
40
230
Notes:
1.Typical leakage at 25℃<50uA, maximum leakage 100uA。
2.At normal:ΔCp±30%,In order to satisfy the applications of customer in various fields, the capacitance range can be designed
VB(V)
Clamping voltage 8/20 μs 1A
Transient energy 10/100μs
Peak current 8/20μs
Capacitance @ 1kHz
Vc(V)
ET(J)
Ip(A)
C(pF)
KRVV0402G35R0NXT
2.5 3.3
5 ±10%
10
0.02
10
1.00
200
1500
KRVV1210G270NXT
17
22
27 ±10%
58
1.00
200
1500
KRVV1210G330NXT
20
25
33 ±10%
65
1.00
200
1400
KRVV1210G390NXT
25
30
39 ±10%
72
1.00
200
1300
KRVV1210G470NXT
30
38
47 ±10%
during manufacturing according to the request, please contact our sales department if needed
Type：1206～1812
□ Leadless，size 3216~4532
□ Multilayer ceramic construction
12 ±10%