电子厂常用英语
电子工厂相关英语词汇
Words & PhrasesPART ONE1.individual 个人2.be responsible for 对…..负责3.in case of 万一4.emergency 紧急5.abandon 放弃；遗弃6.panic 惊慌e over 过来e across 偶遇、碰到9.deposit 押金10.insure 保险11.resign 辞职12.get rid of 除掉13.fragile 易碎的14.recycling 回收；循环利用15.produce 生产16.product 产品17.assembly 装配18.test 测试19.production operator=machine operator 操作工20.quality 质量21.inspector 检测员22.quality control==QC 质量控制，质量管理23.shift 轮班24.8-hour shift / 12-hour shift 8 / 12 小时轮班25.work on shift 上轮班工26.shift allowance 轮班津贴27.accommodation allowance 住宿津贴28.ask for leave 请假29.sick leave 病假30.rejected 不合格的；被拒绝的；被淘汰的31.rejected part 不合格零件32.accepted 合格的；被接受的；被选中的33.accepted part 合格零件34.error 错误35.fail 失败；不合格36.pass 通过；合格37.conflict 冲突38.agree 同意39.show 展示；出示；指给。
看40.hobby 爱好41.shortsighted 近视42.strong point 强项；优点43.weak point 弱项；不足之处44.advantage 优点；优势45.shortcoming 短处；不足之处46.disadvantage 缺点；劣势47.weakness 弱点48.punctual 准时的；守时的49.be late for 做。
电子工厂专业英语词汇
、冲压、喷漆等专业词汇Assembly line组装线Layout布置图Conveyer流水线物料板Rivet table拉钉机Rivet gun拉钉枪Screw driver起子Electric screw driver电动起子Pneumatic screw driver气动起子worktable 工作桌OOBA开箱检查fit together组装在一起fasten锁紧(螺丝)fixture 夹具(治具)pallet栈板barcode条形码barcode scanner条形码扫描仪fuse together熔合fuse machine热熔机repair修理operator作业员QC品管supervisor 课长MEMT制造生技thumb screwlbs.inch镑、英寸EMI gasket导电条front plate前板rear plate后板chassis |'∫æsi| 基座bezel panel面板power button电源按键reset button重置键Hi-pot test of SPS高源高压测试Voltage switch of SPS电源电压接柆键sheet metal parts 冲件plastic parts塑料件SOP制造作业程序material check list物料检查表work cell工作间trolley台车carton纸箱sub-line支线left fork叉车miller铣床grinder磨床driller钻床linear cutting线切割electrical sparkle电火花welder电焊机staker=reviting machine铆合机position职务president董事长general manager总经理special assistant manager特助factory director厂长department director部长deputy manager |'depjuti| =vicemanager副理section supervisor课长deputy section supervisor =vicesection supervisor副课长group leader/supervisor组长line supervisor线长assistant manager助理to move, to carry, to handle搬运be put in storage入库pack packing包装退料制程deficient manufacturing procedure制程不良oxidation |' ksi'dei n|氧化scratch刮伤dents压痕defective upsiding down抽芽不良defective to staking铆合不良embeded lump|in'bed| |l mp|镶块feeding is not in place送料不到位stamping-missing漏冲production capacity生产力education and training教育与训练proposal improvement提案改善spare parts=buffer备件forklift叉车trailer=long vehicle拖板车compound die合模die locker锁模器pressure plate=plate pinch压板bolt螺栓name of a department部门名称administration/general affairs dept总务部automatic screwdriver电动启子thickness gauge厚薄规gauge(or jig)治具power wire电源线buzzer蜂鸣器defective product label不良标签identifying sheet list标示单screwdriver holder起子插座pedal踩踏板stopper阻挡器flow board流水板hydraulic handjack油压板车forklift叉车pallet栈板glove(s)手套glove(s) with exposed fingers割手套thumbforefingermidfingerring fingerlittle fingerband-aidindustrial alcohol工业酒精alcohol container沾湿台head of screwdriver起子头sweeper扫把mop拖把vacuum cleaner吸尘器rag 抹布garbage container灰箕garbage can垃圾箱garbage bag垃圾袋chain链条jack升降机production line流水线chain链条槽magnetizer加磁器lamp holder灯架to mop the floor拖地to clean the floor扫地to clean a table擦桌子air pipe 气管packaging tool打包机packaging打包mildewed=moldy=mouldy发霉rust生锈deformation变形burr(金属)flash(塑件)毛边poor staking铆合不良excessive gap间隙过大grease/oil stains油污inclusion杂质painting peel off脏污shrinking/shrinkage缩水mixed color杂色scratch划伤poor processing 制程不良poor incoming part事件不良fold of packaging belt打包带折皱painting make-up补漆discoloration羿色water spots水渍polishing/surface processing表面处理exposed metal/bare metal金属裸露lack of painting烤漆不到位safety安全quality品质delivery deadline交货期cost成本engineering工程生产关机products良品defective products, not up-to-gradeproducts不良品waste废料board广告牌feeder送料机sliding rack滑料架defective product box不良品箱die change 换模to fix a die装模to take apart a die拆模to repair a die修模packing material包材basket蝴蝶竺plastic basket胶筐isolating plate baffle plate;barricade隔板carton box纸箱to pull and stretch拉深to put material in place, to cutmaterial, to input落料to impose lines压线to compress, compressing压缩character die字模to feed, feeding送料transportation运输(be)qualified, up to grade合格not up to grade, not qualified不合格material change, stock change材料变更feature change 特性变更evaluation评估prepare for, make preparations for准备parameters参数rotating speed, revolution转速manufacture management制造管理abnormal handling异常处理production unit生产单位steel plateroll materialto switch over to, switch---tothrow--over switching over切换engineering, project difficulty工程瓶颈stage die工程模automation自动化to stake, staking, riveting铆合add lubricating oil加润滑油shut die架模shut height of a die架模高度analog-mode device类模器die lifter举模器argon welding氩焊Vocabulary for stamping冲压常词汇stamping, press冲压punch press, dieing out press冲床uncoiler & strainghtener整平机feeder送料机rack, shelf, stack料架cylinder油缸robot机械手taker取料机filings铁削to draw holes抽孔inquiry, search for查寻to stock, storage, in stock库存receive领取approval examine and verify审核processing, to process加工delivery, to deliver 交货To return/delivery to. to senddelivery back to return of goods退货registration登记registration card登记卡to control管制to put forward and hand in提报safe stock安全库存acceptance = receive验收to notice通知application form for purchase请购单consume, consumption消耗to fill in填写abrasion磨损reverse angle = chamfer倒角character die字模to collect, to gather收集failure, trouble故障statistics统计移走模板for diefigure file, chart file图档cutting die, blanking die冲裁模progressive die, follow (-on)die连续模compound die复合模punched hole冲孔panel board镶块to cut edges=side cut=side scrap切边to bending折弯to pull, to stretch拉伸Line stretching, line pulling线拉伸engraving, to engrave刻印upsiding down edges翻边to stake铆合designing, to design设计design modification设计变化die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate, front board模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板upper padding plate blank上垫板spare dies模具备品spring 弹簧bolt螺栓document folder活页夹file folder资料夹to put file in order整理资料spare tools location手工备品仓first count初盘人first check初盘复棹人second count 复盘人second check复盘复核人equipmentQuantity of customs count会计师盘,点数量the first page第一联filed by accounting department forreference会计部存查end-user/using unit(department)使用单位Summary of year-end physicalinventory bills年终盘点截止单据汇总表bill name单据名称This sheet and physical inventorylist will be sent to accountingdepartment together (Those ofNHK will be sent to financialdepartment)本表请与盘点清册一起送会计部－(NHK厂区送财会部)Application status records ofyear-end physical inventory Listand physical inventory card 年终盘点卡与清册使用－状况明细表meeting minutes会议记录meeting type 会别distribution department分发单位location地点chairman主席present members出席人员subject主题conclusion结论decision items决议事项responsible department负责单位pre-fixed finishing date预定完成日approved by / checked by /prepared by核准/审核/承办PCE assembly productionschedule sheetPCE组装厂生产排配表model机锺work order工令revision版次remark备注production control confirmation生产确认checked by初审approved by核准department部门Stock age analysis sheetdifference analysis sheet年终盘点差异分析表physical inventory盘点数量physical count quantity账面数量difference quantity差异量cause analysis原因分析raw materials原料materials物料finished product成品semi-finished product半成品packing materials包材good product/accepted goods/accepted parts/good parts良品defective product/non-good parts不良品disposed goods处理品warehouse/hub仓库on way location在途仓oversea location海外仓spare parts physical inventory list备品盘点清单spare molds location模具备品仓skid/pallet栈板tox machine自铆机wire EDM线割EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差pocket for the punch head挂钩槽slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)set screwform blockstop pinround pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject-rod气垫顶杆spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块club car高尔夫球车capability能力parameter参数factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂seal封孔revision版次part number/P/N料号good products良品scraped products报放心品defective products不良品finished products成品disposed products处理品barcode条形码flow chart流程窗体assembly组装stamping冲压molding成型spare parts=buffer备品coordinate坐标dismantle the die折模auxiliary function辅助功能poly-line多义线heater band 加热片thermocouple热电偶sand blasting喷沙grit 砂砾derusting machine除锈机degate打浇口dryer烘干机induction感应感应gouge沟槽;凿槽satin texture段面咬花witness line证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate钣金lathe车mill锉plane刨grind磨drill铝boring镗blister气泡fillet镶;嵌边through-hole form通孔形式roller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴angular offset角度偏差velocity速度production tempo生产进度现状torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金tungsten high speed steel钨高速的moly high speed steel钼高速的organic solvent有机溶剂bracket小磁导liaison联络单volatileresistanceion离子titratorbeaconcoolantcrusher破碎机模具工程类plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱inner hexagon screw内六角螺钉dowel pin固定销coil spring弹簧lifter pin顶料销eq-height sleeves=spool等高套筒pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）top block上垫脚)stripping plate内外打(脱料板)outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板零件类punch冲头insert入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶杆trimming punch切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch压筋冲子reel-stretch punch卷圆压平冲子guide plate定位板sliding block滑块sliding dowel block滑块固定块active plate活动板lower sliding plate下滑块板upper holder block上压块upper mid plate上中间板spring box弹簧箱spring-box eject-rod弹簧箱顶杆spring-box eject-plate弹簧箱顶板bushing block衬套cover plate盖板guide pad导料块塑件&模具相关英文flash moldplsitive moldsplit moldcavity型控core模心taper锥拔leather cloak仿皮革shiver饰纹flow mark流痕welding mark溶合痕post screw insert螺纹套筒埋值self tapping screw自攻螺丝striper plate脱料板piston活塞cylinder汽缸套chip细碎物handle mold手持式模具移转成型用模具encapsulation molding低压封装成型L=3~5mmwelding line熔合痕eject pin顶出针knock pin顶出销return pin回位销反顶针sleeve套筒stripper plate脱料板insert core放置入子runner stripper plate浇道脱料板guide pin导销eject rod (bar)（成型机）顶业捧subzero深冷处理three plate三极式模具runner system浇道系统stress crack应力电裂orientation定向sprue gate射料浇口，直浇口nozzle射嘴(拉料杆)tunnel gate隧道式浇口pin gate针点浇口Φ0.8~1.0mmRunner less无浇道(sprue less)无射料管方式long nozzle延长喷嘴方式sprue浇口;溶渣质量人员名称类QC quality control 品质管理人员FQC final quality control 终点质量管理人员IPQC in process quality control 制程中的质量管理人员OQC output quality control 最终出货质量管理人员IQC incoming quality control 进料质量管理人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 质量工程人员质量保证类FAI first article inspection 新品首件检查FAA first article assurance 首件确认TVR tool verification report 模具确认报告3B 3B 模具正式投产前确认CP capability index 能力指数CPKSSQAOOBA out of box auditQFDFMEA8D 8 disciplinesFA final auditCARFQC运作类AQLS/S Sample sizeACC AcceptREE RejectCRMAJ 主要的MIN 轻微的AOQ 平均出厂质量AOQL 平均出厂质量Q/R/S 质量/可靠度服务MIL-STD Military-Standard 军用标准S I-S IV Special I-Special IV 特殊抽样水平等级P/N Part Number 料号L/N Lot Number 特采AOD Accept On Deviation 特采UAI Use As It 首件检查报告FPIR First Piece Inspection Report 百万分之一PPM Percent Per Million 批号制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计质量管理R Range 全距AR Average Range 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限MAX Maximum 最大值MIN Minimum 最小值GRR Gauge Reproducibility & Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸DIA Diameter 直径FREQ FrequencyN Number其它质量术语类QCCQITPDCAZD Zero DefectQIQP Quality PolicyTQMMRBLQLRMAQANADMQT 质量目标7QCTools 品管七大手法通用之件类ECN 工程变更通知(供货商)ECO 工程改动要求(客户)PCN Process Change Notice 工序改动通知PMP Product Management Plan 生产管制计划SIP Specification In Process 制程检验规格SOP Standard Operation Procedure 制造作业规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面系统文件类QC Quality System 质量系统ES Engineering Standardization 工程标准CGOO China General PCE龙华厂文件H Huston (美国)休斯敦C Compaq (美国)康伯公司C China 中国大陆A Assembly 组装(厂)S Stamping 冲压(厂)P Painting 烤漆(厂)I Intel 英特尔公司T TAIWANIWSISOGSCMCSCQCACQCP P-Painting部类PMCPPCMC Material ControlMEPEA/CP/ADC 资料中心QE 质量工程(部) QA 质量保证(处) QC 质量管理(课) PD 生产部LAB Library 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部P Painting 烤漆(厂)A Assembly 组装(厂)S Stamping 冲压(厂)生产类PCS Pieces 个(根,块等) PRS Pairs 双(对等)CTN Carton 卡通箱PAL Pallet/skid 栈板PO Purchasing Order 采购订单MO Manufacture Order 生产单D/C Date Code 生产日期码ID/C Identification Code (供货商)识别码SWR Special Work Request 特殊工作需求L/N Lot Number 批号P/N Part Number 料号其它OEM Original Equipment Manufacture 原设备制造PCEPCCPUSECC SECC`SGCC SGCCNHKPRCU.S.AA.S.A.PE-MAIL Electrical-MailN/A Not ApplicableQTY QuantityVSREV RevisionJITI/O 输入/输出OK 好NG 不行,不合格C=0 极严重不允许ESD 静电排放5S 希腊语整理,整顿,清扫,清洁,教养ATIN Attention 知会CC Carbon Copy 副本复印相关人员APP Approve 核准,认可,承认CHK Check 确认AM Ante Meridian 上午PM Post Meridian 下午CD Compact Disk 光盘CD-ROM Compact Disk Read-Only Memory 只读光盘FDD Floppy Disk Drive 软盘机HDD Hard Disk Drive 碟碟机REF Reference 仅供参考CONN Connector 连接器CAV Cavity 模穴CAD Computer Aid Design 计算器辅助设计ASS'Y Assembly 装配,组装MAT'S Material 材料IC Integrated Circuit 集成电路T/P True Position 真位度TYP Type 类型WDRC?T Cycle TimeL/T Lead TimeS/T Standard TimeP/M Product Market3C5WIH5M4MIHSQADQAMQASSQALRR Lot Reject RateBSEMI 高磁测试FMI 高频测试B/MC/PA/PSPS Switching power supply 电源箱DT Desk Top 卧式(机箱)MT Mini-Tower 立式(机箱)DVD Digital Video DiskVCD Video Compact DiskLCD Liquid Crystal DisplayCAD Computer AID DesignCAM Computer AID ManufacturingCAE Computer AID EngineeringABIOS Advanced Basic in put/output system 先进的基本输入/输出系统CMOS Complementary Metal-Oxide-Semiconductor Transistor 互补金属氧化物半导体PDA Personal Digital Assistant 个人数字助理IC Integrated Circuit 集成电路ISA Industry Standard Architecture 工业标准体制结构MCA Micro Channel Architecture 微信道结构EISA Extended Industry Standard Architecture 扩充的工业标准结构SIMM Single in-line memory module 单项导通汇流组件DIMM Dual in-line Memory Module 双项导通汇流组件LED Light-Emitting Diode 发光二级管FMEA Failure Mode Effectiveness 失效模式分析W/H Wire HarnessF/C Flat CablePCB Printed Circuit BoardCARNG Not GoodWPRPPM Parts Per MillionTPMMRPOS Operation SystemTBA To Be DesignD/C Drawing ChangeP/P Plans & ProcedureEMIRFIMMCMMSLMCLMS:'。
电子行业专业英语词汇
.'专用词汇表一、生产流程1.插机(刮蓝胶)component- inserting2.装配assembly3.修理repair4.包装packaging5.成品仓finished goods warehouse6.返工rework7.啤胶件8.组件成型component moulding9.IC烧录IC program10.插件insection11.注塑plastic injection12.发料material delivery13.插机14.零件加工component-processing15.炉前外观检查visual inspection beforewave soldering16.电源板波峰焊power board wave soldering17.执锡18.零件后焊hand soldering19.零件焊接&打黄胶20.低电压测试low voltage test21.半成品外观检查Semi-finished goods visualinspection22.过水洗机23.打热熔胶dotting hot glue24.装卡板25.pallet栈板26.IC烧录IC program27.SMT(刮锡膏)28.喷油spray conformal coating29.焗干防水油30.welding 焊接31.breathing 排气32.feed 供料33.Tiana天那水34.to load material上料to unload material卸料to return material/stock to退料.'35.to fix a die装模to take apart a die拆模36.cold forging 冷锻press forging 冲锻37.to impose lines压线to compress, compressing压缩38.焗炉温度39.开槽groove40.shearing剪断41.接线端子terminal42.to stake, staking, reviting铆合43.fuse together熔合44.electrical sparkle电火花45.fit together组装在一起46.fasten锁紧(螺丝)47.rotating speed, revolution转速48.argon welding氩焊49.to take apart a die卸下模具50.to load a die装上模具51.to tight a bolt拧紧螺栓to looser a bolt拧松螺栓pound die复合模53.punched hole冲孔54.buffing 抛光55.chamfering machine 倒角机56.panel board镶块57.to cutedges=side cut=side scrap切边58.to pull, to stretch拉伸59.Line streching, line pulling线拉伸60.engraving, to engrave刻印61.degrease脱脂62.rinse水洗63.pierce die冲孔模64.forming die成型模65.progressive die连续模66.gang dies复合模67.shearing die剪边模68.riveting die铆合模69.pierce冲孔70.forming成型(抽凸,冲凸).'71.draw hole抽孔72.吹热缩管73.胶芯plastic core二、夹具设备、工具74.烙铁iron75.排氣扇A exhaust fan76.稀釋劑a tinner77.水洗锡线78.pallet栈板79.gunk 料斗80.caliper gauge 卡规81.Screw driver起子82.barcode scanner条码扫描器83.热风枪hot air reflowing gun84.taker取料机85.roller 滚筒runner 流道86.plastic basket胶筐87.isolating plate baffle plate; barricade隔板88.steel plate钢板89.roll material卷料90.conveyer belt输送带91.transmission rack输送架92.钢网stencil93.油墨printing ink94.插机并过炉95.高压测试hi-pot test96.铣刀milling cutter97.发热管heater98.烙铁咀iron tip99.静电手套ESD gloves 100.风枪air gun101.punch冲头102.g roove punch压线冲子103.a ir vent排气道104.w elding line熔合痕105.C ONN Connector 连接器106.C AV Cavity 模穴107.A SS'Y Assembly 装配,组装108.继电器relay109.磨床切割片110.延时器delay timer.'111.热电偶Heat control sensor 、thermocouple 112.电磁阀Solenoid113.温控器Temperature control114.烙铁发热芯heater core for iron115.剪钳wire cutter116.电批开关Electric screw driver switch 117.电批Electric screw driver118.电批齿轮Electric screw driver gear 119.火牛transformer120.碳刷Carbon brush121.吸锡泵suck solder pump122.尖嘴钳micro long nose pliers123.热熔胶枪glue gun124.热风筒heating gun125.f use machine热熔机126.烙铁座iron seat127.静电带wrist strap128.波峰锡炉wave soldering oven129.水循环系统water-recycling system 130.水洗机131.防水油conformal coating132.自动成型机auto-moulding machine 133.电晶体自动成型机134.螺丝泵screw pump135.恒温运风焗炉136.手浸锡炉137.剪脚机138.超声波蒸水机139.表面组件拾放机140.高周波塑料熔接机141.半自动锡浆印刷机142.剪线机143.超声波啤机ultrasonic welding machine 144.自动绕线机145.超声波清洗机ultrasonic cleaning machine 146.振动试验台vibration test platform 147.计算机剥线机electronic wire-peeling machine148.贴片机SMT equipment149.供料器feeder.'150.红外焗炉151.封黑胶预热炉152.回焊炉温度曲线测试仪153.焗炉154.进料器车155.锡浆搅拌机156.无铅波峰焊机157.开线机158.封口机159.胶纸机160.移载装置161.送板机162.周转车163.发电机electric generator 164.注塑机plastic injection machine 165.碎料机smashing machine 166.干燥机drier167.自动吸料机auto-sucking machine 168.锯床169.车床lathe 170.钻床171.punching machine 冲床172.干燥机drier173.冷水机cooler174.数控精密火花机175.移印机printer176.手动吊机177.热油机oil-heating machine178.叉车forklift179.磨床grinder180.铣床miller181.sheet metal parts 冲件182.punching machine 冲床183.过滤器filter184.碎料干燥机185.抽湿机186.热风回焊炉hot air reflow soldering oven 187.注塑机plastic injeciton machine 188.润滑油grease189.汽缸Rmulti cylinder.'190.螺丝screw191.弹簧spring192.蜂鸣器buzzle193.刮刀squeegee194.真空杯vacuum cup195.真空咀vacuum tip196.喷嘴Nozzle197.支架bracket198.六角板手hex.wrench199.过滤器Filter200.密封圈airproof ring 201.套筒/活塞piston202.顶针thimble203.传输皮带belt/conveyor 204.真空棉 pad vacuum 205.消音器muffler206.滑轮Pulley,idler tension,asy pre-tension207.夹片Replacement Fine Foil 208.线夹wire clamp 209.扎线tie wrap210.通风孔blowhole211.自功螺丝self-tapping screw212.保险丝Fuse213.高度规High dividers214.螺线管solenoid215.送/扯线螺线管Spring solenoid assembly 216.焊咀gaiser217.电源线Power cord218.测试针test probe219.变压器transformer220.弹性定位柱spring fixation pole 221.铝皮sheet aluminum222.网络线communicate wire223.电磁阀Solenoid AIRTAC224.精调电阻Precision adjustable resisto 225.脚踏开关foot switch226.开关电源switching power227.散热片Thermal Conductive Pad 228.旋转开关Rotary switch.'229.接线柱Pole Wiring230.音频插头Audio plug231.按键开关keyswitch232.保险丝座Fuse jack233.定位柱fixation pole234.ICT压棒ICT-PRESSING STICK 235.除泡剂Defoamer236.继电器Relay237.电线束electrical wiring harness 238.锡箔纸Solder foil papper239.针筒needle canister240.光电开关Photoelectricity switch 241.电批Electric screw driver242.烙铁soldering iron243.黄油（润滑油）butter (lubricant) 244.气管wind pipe245.刀片blade246.bolt螺栓247.trailer=long vehicle拖板车248.stopper阻挡器249.flow board流水板250.vaccum cleaner吸尘器251.q uenching淬火252.tempering回火253.annealing退火254.volatile挥发性255.风批Pneumatic driver256.电批Electric screw driver三、质量管理QC : quality control 质量管理257.IQC : incoming quality control 进料质量管理258..OQC : output quality control 出货质量管理259.PQC : process quality control 制程质量管理也称260.IPQC: in process quality control. 261.A QL : acceptable quality level 允收标准262.CQA: customer quality assurance 客户质量保证263.PPM Parts Per Million 百万分之一.'264.MA : major defect 主要缺点MI : minor defect 次要缺点265.CR :critical defect 关键缺点266.SMT : surface mounting technology 表面粘贴技术267.SMD : surface mounting device 贴片机268.SMC : surface mounting component 表面粘贴组件269.ECN : engineering change notice 工程变更通知270.DCN : design change notice 设计变更通知271.B OM : bill of material 物料清单-STD-105E : 美国陆军标准,也称单次抽样计划.273.NG :Not Good 不行,不合格274.ESD Electry-static Discharge 静电排放275.5S 希腊语整理,整顿,清扫,清洁,教养276.Polarity : 电性/极性Icicles : 锡尖277.Non-wetting : 空焊278.burr 毛刺，批锋279.locking knot 死结280.torsion 扭曲281.w arpage 翘曲282.waviness 波痕283.flying 飞件284.blister 起泡285.Short circuit : 短路286.冷焊cold soldering287.non-welding288.假焊289.包焊290.焊点291.l ifted solder 浮焊292.pseudo soldering 虚焊293.open soldering脱焊294.Splay mark 水纹295.icicle/solder projection拉尖.'296.Flow mark 流纹297.White patches on surface 表面白斑298.Sink marks 缩影299.Mold release 脱模300.焊盘soldering tray301.M issing component : 缺件302.Wrong component : 错件303.Excess component : 多件304.Insufficient solder : 锡少305.Excessive solder : 锡多306.Solder residue : 锡渣307.Solder ball : 锡球308.Tombstone : 墓碑309.breaking.(be)broken,(be)cracked 断裂310.S ideward : 侧立311.cosmetic defect外观不良312.mixed color杂色313.die repair模修314.rust生锈315.grease/oil stains油污316.delamination起鳞317.gouge沟槽;凿槽318.inclusion杂质319.poor staking铆合不良320.oxidation 氧化321.abrasion磨损322.reverse angle = chamfer倒角323.failure, trouble故障324.dents压痕325.defective upsiding down抽芽不良326.defective to staking铆合不良327.embedded lump镶块328.feeding is not in place送料不到位329.stamping-missing漏冲330.excessive gap间隙过大331.b urr(金属)flash(塑件)毛边dewed=moldy=mouldy发霉333.slipped screw head & slippery screw head螺丝滑头334.slipped screwhead/shippery screw thread滑手.'335.speckle斑点336.dimension/size is a little bigger尺寸偏大(小)337.not up to standard不合规格out of specification338.shrinking/shrinkage缩水339.mixed color杂色340.discoloration异色341.a geing 老化342.hardening 硬化343.overheating 过热344.rust prevention 防蚀345.tempering 回火346.water spots水渍347.exposed metal/bare metal金属裸露ck of painting烤漆不到位ponent damage : 零件破损350.Gold finger : 金手指351.S OP : standard operation process 标准操作流程352.SIP : standard inspection process 标准检验流程353.Simple random sampling : 简单随机抽样354.SPC : Statistical process control 355.SQE : Supplier quality engineering 356.Sampling sample :抽样计划357.fixture : 治具358.Gauge 量规359.QTS: Quality tracking system 质量追查系统360.Spare parts :备用品361.I nventory report for : 库存表362.Manpower/Tact estimation 工时预算363.Calibration : 校验364.Corrugated pad : 波纹垫365.Conductive bag : 保护袋366.Fixture : 制具367.Probe : 探针368.Lint-free gloves : 静电手套369.Wrist wrap : 静电手环370.plug hole孔塞371.W rong direction 极性反ponent damage or broken 零件破损373.Unmeleted solder熔锡不良374.flux residue松香残渣375.wrong label or upside down label贴反376.mixed parts机种混装377.poor solder mask绿漆不良378.氧化Oxidization379.刮花Scratch380.脏污Contamination381.变形Deformation382.stand off height浮高383.IC reverse IC反向384.supervisor课长385.Forman组长386.R.T.Y: Rolled throughout yield直通率387.PPM: Parts per million 不良率388.DPU: Defects per unit 单位不良率389.Resistor: 电阻390.Capacitor:电容391.R esistor array : 排阻392.Capacitor array: 排容393.DIODE: 二极管394.triode: 三极管395.Crystal:震荡器396.Fuse:保险丝397.Bead: 电感inductor398.Connector:连结器399.Metal Shearing:裁剪400.ERP: Enterprise Resource Planning 企业资源规划401.P rocessed material: 流程性材料402.Corrective action:纠正措施403.Preventive action:预防措施404.PDCA:Plan/Do/Check/Action计划/实施/检查/处理405.Oscillator:振荡器406.Adapter: 适配器407.Spindle:轴心408.WIP: Work in process半成品Waive:特别采用409.FMEA:Protentical Failure Mode and Effects Analysis失效模式与效应分析410.M SA: Measurement Systems Analysis 量测系统分析411.Benchmarking:竞争标竿412.Roka Yoke 防错法413.Mistake Proofing 防呆法414.Fool-Proof System防呆系统415.Specified Requirement:规定要求416.AOQ: Average Outgoing Quality 平均检出质量AOQL: Average OutgoingQuality Limit 平均检出质量界限417.Benchmarking 基准点418.Calibration 校准419.Continuous improvement 持续改进420.Deviation / Substitution 偏差/ 置换421.ESD: Electrostatic discharge 静电释放422.FMEA: Failure Mode Effect Analysis 失误模式效应分析423.First Article approval 产品的首次论证424.First pass yield 一次性通过的成品率425.First sample inspection 第一次样品检验426.FMECA: Failure mode effect and critically analysis 失误模式,效应及后果分析427.Life Testing 寿命试验Lot traceability 批量可追溯性428.NONCONFORMANCE 不符合429.OUT-OF-CONTROL PROCESS 失控工序430.Pilot Application 试产(试用) 431.P PM: Parts per million 百万分之一432.Process capability index 工序能力指数433.Total quality management 全面质量管理434.Site Audit 现场审核435.Failure rate percentage 失误百分率436.Customer complaints 客户投诉437.Root cause analysis of failures 失误根原分析yout Inspection:全尺寸检验439.Bulk material:散装材料440.Feasibility Reviews:可行性审查441.P re-launch:量产前442.Stock rotation :存货周转443.Inventory levels:最低库存量444.Interim action:临时措施445.Permanent action:永久措施446.vibration test振动试验447.Conveyer流水线物料板448.fasten锁紧(螺丝)449.fuse machine热熔机450.SOP制造作业程序451.w ork cell工作间452.trolley台车453.carton纸箱454.电阻Resistor455.电容Capacitor456.晶振Crystal resonator 457.开关Switch458.插座Jack459.插头Plug460.工艺Workmanship 461.喷油Conformal coating 462.插件Insertion463.回焊炉Reflowing oven 464.飞达feeder465.吸嘴466.钢网Stencil467.抛料468.线股Strand469.松香Flux470.尾数WP471.锡炉DIP472.暂置Hold473.全检Sorting474.条形码Bar code475.日期编码Date code476.标准作业指导书SOP Standard operation plan477.过电压保护OVP Over voltage protect 478.汶波/噪声Noise479.连接器Connector480.线材Cable481.C TQ=critical to quality。
电子厂常用英语
电子厂常用英语在电子厂工作，掌握一些常用的英语词汇和表达方式是非常重要的。
这不仅有助于提高工作效率，还能促进与国际团队的沟通。
以下是一些电子厂中常用的英语词汇和表达：1. 组件（Component）：电子厂中的基本单元，如电阻（Resistor）、电容（Capacitor）、晶体管（Transistor）等。
2. 电路板（Circuit Board）：用于组装电子组件的基板，常见的有印刷电路板（Printed Circuit Board, PCB）。
3. 焊接（Soldering）：将电子组件固定在电路板上的过程。
4. 测试（Testing）：对电子设备进行功能和性能的检验，确保其符合设计要求。
5. 质量控制（Quality Control）：确保产品符合质量标准的过程。
6. 故障诊断（Troubleshooting）：识别并解决电子设备中的问题。
7. 维修（Maintenance）：定期检查和修复电子设备，以保持其良好运行状态。
8. 生产线（Assembly Line）：用于组装电子设备的流水线。
9. 库存管理（Inventory Management）：跟踪和管理电子厂中的物料和成品。
10. 供应链（Supply Chain）：涉及原材料采购、生产、分销和销售的整个流程。
11. 环境控制（Environmental Control）：确保电子厂的生产环境符合安全和健康标准。
12. 工艺流程（Process Flow）：描述电子设备生产过程中的各个步骤。
13. 产品生命周期（Product Life Cycle）：从产品开发到市场退出的整个过程。
14. 技术规格（Technical Specifications）：详细描述电子设备性能和功能的文档。
15. 项目管理（Project Management）：规划、组织和监督电子项目从开始到结束的全过程。
16. 持续改进（Continuous Improvement）：不断寻找提高生产效率和产品质量的方法。
电子厂常用英语词汇.
镊子: TWEEZERS 电容: CAPACITOR顺时针方向:CLOCKWISE锯子: SAW电阻: RESISTOR 逆时针方向: CONTERCLOCKWISE尖嘴钳: NOSE PLIER继电器: RELAY 振动测试: VIBRATION TEST扳手: SPANNER晶振: CRYSTAL 丝印:SPRAY-PAITING鎯头: HAMMER过滤器: FILTER 烫金:METAL-STAMPING电烙铁: SOLDERING IRON 二极管: DIODES 剪钳: WIRE CUTTER三极管: TRIODE老虎钳: PLIERS 发光二极管: LIGHT EMITTING DIODE( LED)电批: TORQUE DRIVER松香: FLUX夹子: CLAMP松香笔: FLUX PEN 正极: ANODE END三角架: CROWFOOD 红胶水: EPOXYB ADHESIVE负极: CATHODE END钢网: STENCIL胶水: GLUE 硬化: CURING刮刀: SQUEEGEE 贴纸: STICKER配线:WIRING刀片: BLADE透明胶纸: OPP TAPE 冷却硬化: OVEN-CURING放大镜: VISIONSCOPE卡板: PALLET间距: PITCH调压器: BOOSTER 手推车: TROLLEYS周期:CIRCLETIME示波器: OSCILLOSCOPE烘干: BAKE 测试: DEBUG测试针: TOGGLE PINS紫外线: ULTRAVIOLET模拟: SIMULATION架子: RACK线圈: WINDING 毛细管现象: CAPILLARY ACTION支架: BRACKETS 涂层: COATING导体:CONDUCTIVEPATTERN溶剂: SOVENT介质材料: DIELETRICMATERIAL隔热板: FELT 镀通孔: PTH( PLATED THROUGH HOLE)锡条: SOLDE BAR 不合格品: NONCONFIRMING UNITS锡膏: SOLDER PASTE原料: DIRECT MATERIAL氧化: OXIDE锡炉: SOLDER-POT 辅料: INDIRECTMATERIAL额定电源: RATEDPOWER浸锡:DIG-SOLDER 试产: PILOT PRODUCTION 量产: MASS PRODUCTION焊点: SOLDERING JOINTS X 光测试: X RAY TEST焊盘: PAD/LAND 跌打测试: DROP TEST焊接: WELDING老化测试: BURN-IN TEST 超声波焊接: ULTRASONIC WELDING回流焊接: REFLOW SOLDERING波峰焊接: WAVE SOLDERING 线路板; PCB(Printed Circuit Board)回焊前: PRE-REFLOW 线路板装配: PCBA( PRINTED CIRCUIT BOARD ASSEMBLY)回焊后: POST-REFLOW 集成电路:IC( INTERGRATED CIRCUIT)回流炉: REFLOW OVEN ESD: ELECTROSTATIC DISCHARGE: 静电放电虚焊: DEWETTING ESD PREVENTION&DAMAGE: 静电防护与损坏假焊: SHORT SOLDER FMEA: FAILURE MODE AND EFFECT ANALYSIS(失效模式分析)少锡: INSUFFICENT SOLDER SPC: STASTICAL PROCESS CONTROL(统计过程控制)偏位: MISALIGNMENT IPC: INSTITUTE OF PACKING AND INTERCONNECTS(电子电路互连与封装协会)阻焊剂:SOLDER-THIEF/MASK 注塑: INJECTION MOLDING层分: DELAMINATION线路: TRACE裂: CRACKED 浮起: LIFTING回路: CIRCUIT内翘: WARPED 静电防护: STATIC SHIELDING短路: BRIGING/SHORT 翘起: LIFT 散静电: STATIC DISSIPATIVE线路开路: BROKEN TRACE 弯: BOW 防静电: ANTISTATIC。
电子工厂专业英语词汇表
1冲压、喷漆等专业词汇Assembly line 组装线 Layout 布置图Conveyer 流水线物料板 Rivet table 拉钉机 Rivet gun 拉钉枪 Screw driver 起子Electric screw driver 电动起子 Pn e u m a t i c s c r e w d r i v e r 气 worktable 工作桌 OOBA 开箱检查 fit together 组装在一起 fasten 锁紧(螺丝) fixture 夹具(治具) pallet 栈板 barcode 条形码barcode scanner 条形码扫描仪 fuse together 熔合 fuse machine 热熔机 repair 修理 operator 作业员 QC品管 supervisor 课长 ME 制造工程师 MT制造生技 cosmetic inspect 外观检查 inner parts inspect 内部检查 thumb screw 大头螺丝 lbs.inch 镑、英寸 EMI gasket 导电条 front plate 前板 rear plate 后板 chassis |'∫?si| 基座 bezel panel 面板 power button 电源按键 reset button 重置键Hi-pot test of SPS 高源高压测试 V oltage switch of SPS 电源电压接柆键 sheet metal parts 冲件 plastic parts 塑料件 SOP 制造作业程序material check list 物料检查表 work cell 工作间 trolley 台车 carton 纸箱 sub-line 支线 left fork 叉车Personnel resource department 人力资源部planning department 企划部 QC Section 品管科 stamping factory 冲压厂 painting factory 烤漆厂 molding factory 成型厂 punching machine 冲床 robot 机械手hydraulic machine 油压机 lathe 车床 planer |'plein?|刨床 miller 铣床 grinder 磨床 driller 钻床 linear cutting 线切割 electrical sparkle 电火花 welder 电焊机position 职务 president 董事长 general manager 总经理 factory director 厂长 department director 部长 deputy manager |'depjuti| =vice manager 副理 section supervisor 课长deputy section supervisor =vicegroup leader/supervisor 组长 line supervisor 线长 assistant manager 助理 be put in storage 入库 pack packing 包装 to apply oil 擦油 to file burr 锉毛刺 final inspection 终检 to connect material 接料 to reverse material 翻料 wet station 沾湿台 Tiana 天那水 cleaning cloth 抹布 to load material 上料 to unload material 卸料 to return material/stock to 退料 scraped |'skr?pid|报废 scrape ..v.刮;削deficient purchase 来料不良 manufacture procedure 制程 deficient manufacturing procedure 制程不良oxidation |' ksi'dei?n|氧化 scratch 刮伤 dents 压痕defective upsiding down 抽芽不良 defective to staking 铆合不良 embeded lump|in'bed| |l?mp|镶块 feeding is not in place 送料不到位 stamping-missing 漏冲 production capacity 生产力 education and training 教育与训练 proposal improvement 提案改善 spare parts=buffer 备件 forklift 叉车trailer=long vehicle 拖板车2compound die 合模 die locker 锁模器pressure plate=plate pinch 压板 bolt 螺栓name of a department 部门名称 administration/general affairs dept 总务部automatic screwdriver 电动启子 thickness gauge 厚薄规 gauge(or jig)治具 power wire 电源线 buzzer 蜂鸣器defective product label 不良标签 identifying sheet list 标示单 screwdriver holder 起子插座 pedal 踩踏板 stopper 阻挡器 flow board 流水板hydraulic handjack 油压板车 forklift 叉车 pallet 栈板 glove(s)手套 gl o v e (s ) w i t h e x p o s e dthumb 大拇指 forefinger 食指 midfinger 中指 ring finger 无名指 little finger 小指 band-aid 创可贴industrial alcohol 工业酒精 alcohol container 沾湿台 head of screwdriver 起子头 sweeper 扫把 mop 拖把vacuum cleaner 吸尘器 rag 抹布garbage container 灰箕 garbage can 垃圾箱 garbage bag 垃圾袋 chain 链条 jack 升降机production line 流水线 chain 链条槽 magnetizer 加磁器 lamp holder 灯架 to mop the floor 拖地 to clean the floor 扫地 to clean a table 擦桌子 air pipe 气管 packaging tool 打包机 packaging 打包 missing part 漏件 wrong part 错件excessive defects 过多的缺陷 critical defect 极严重缺陷 major defect 主要缺陷 minor defect 次要缺陷 not up to standard 不合规格dimension/size is a little bigger 尺寸偏大(小)cosmetic defect 外观不良 slipped screwhead / slippery screw head 螺丝滑头slipped screwhead / shippery screw thread 滑手 speckle 斑点mildewed=moldy=mouldy 发霉 rust 生锈 deformation 变形 burr(金属)flash(塑件)毛边 poor staking 铆合不良 excessive gap 间隙过大 grease/oil stains 油污 inclusion 杂质 painting peel off 脏污 shrinking/shrinkage 缩水 mixed color 杂色 scratch 划伤poor processing 制程不良 poor incoming part 事件不良fold of packaging belt 打包带折皱 painting make-up 补漆 discoloration 羿色 water spots 水渍 po l i s h i n g /s u r f a c e p r o c e s s i n g 表 exposed metal/bare metal 金属裸露 lack of painting 烤漆不到位 safety 安全 quality 品质delivery deadline 交货期 cost 成本 engineering 工程 die repair 模修enterprise plan = enterprise expansion projects 企划 QC品管 die worker 模工production, to produce 生产 equipment 设备 to start a press 开机 stop/switch off a press 关机 classification 整理 regulation 整顿 cleanness 清扫 conservation 清洁 culture 教养qualified products, up-to-grade products 良品defective products, not up-to-grade products 不良品 waste 废料 board 广告牌 feeder 送料机 sliding rack 滑料架defective product box 不良品箱 die change 换模 to fix a die 装模 to take apart a die 拆模 to repair a die 修模 packing material 包材3basket 蝴蝶竺 plastic basket 胶筐isolating plate baffle plate; barricade 隔板carton box 纸箱 to pull and stretch 拉深to put material in place, to cut material, to input 落料 to impose lines 压线to compress, compressing 压缩 character die 字模 to feed, feeding 送料 transportation 运输(be)qualified, up to grade 合格 not up to grade, not qualified 不合格 material change, stock change 材料变更feature change 特性变更 evaluation 评估prepare for, make preparations for 准备parameters 参数rotating speed, revolution 转速 manufacture management 制造管理 abnormal handling 异常处理 production unit 生产单位 lots of production 生产批量 steel plate 钢板 roll material 卷料manufacture procedure 制程 operation procedure 作业流程 to revise, modify 修订 to switch over to, switch---to throw--over switching over 切换 en g i n e e r i nstage die 工程模 automation 自动化to stake, staking, riveting 铆合 add lubricating oil 加润滑油 shut die 架模 shut height of a die 架模高度 analog-mode device 类模器 die lifter 举模器 argon welding 氩焊 Vocabulary for stamping 冲压常词汇 stamping, press 冲压punch press, dieing out press 冲床 uncoiler & strainghtener 整平机 feeder 送料机 rack, shelf, stack 料架 cylinder 油缸 robot 机械手 taker 取料机 conveyer belt 输送带 transmission rack 输送架 top stop 上死点 bottom stop 下死点 one stroke 一行程 inch 寸动to continue, cont.连动 to grip(material)吸料location lump, locating piece, block stop 定位块 reset 复位 smoothly 顺利 dent 压痕 scratch 刮伤 deformation 变形 filings 铁削 to draw holes 抽孔 inquiry, search for 查寻 to stock, storage, in stock 库存 receive 领取approval examine and verify 审核 processing, to process 加工 delivery, to deliver 交货To return/delivery to. to send delivery ba c k tregistration 登记 registration card 登记卡 to control 管制to put forward and hand in 提报 safe stock 安全库存 acceptance = receive 验收 to notice 通知 ap p l i c a t i o n f o r mf o r p u r h a s e consume, consumption 消耗 to fill in 填写 abrasion 磨损reverse angle = chamfer 倒角 character die 字模 to collect, to gather 收集 failure, trouble 故障 statistics 统计demand and supply 需求 career card 履历卡 to take apart a die 卸下模具 to load a die 装上模具 to tight a bolt 拧紧螺栓 to looser a bolt 拧松螺栓 easily damaged parts 易损件 standard parts 标准件breaking.(be)broken,(be)cracked 断裂 to lubricate 润滑 commonvocabularyfordieengineering 模具工程常用词汇 die模具 figure file, chart file 图档 cu t t i n gd ie , bprogressive die, follow (-on)die 连续模compound die 复合模 punched hole 冲孔 panel board 镶块 to bending 折弯 to pull, to stretch 拉伸Line stretching, line pulling 线拉伸engraving, to engrave刻印upsiding down edges翻边to stake铆合designing, to design设计design modification设计变化die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate, front board模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板spare dies模具备品spring 弹簧bolt螺栓document folder活页夹file folder资料夹to put file in order整理资料first count初盘人first check初盘复棹人second count 复盘人second check复盘复核人equipment设备waste materials废料casing = containerization装箱quantity of physical inventory second count 复盘点数量Quantity of customs count会计师盘,点数量the first page第一联filed by accounting department for reference会计部存查end-user/using unit(department)使用单位Summary of year-end physicalinventory bills年终盘点截止单据汇总表bill name单据名称This sheet and physical inventory listwill be sent to accounting departmenttogether (Those of NHK will be sent tofinancial department)本表请与盘点清册一起送会计部－(NHK厂区送财会部)Application status records of year-endphysical inventory List and physicalinventory card 年终盘点卡与清册Blank and waste sheet NO.空白与作废单号plate电镀mold成型material for engineering mold testing工程试模材料not included in physical inventory不列入盘点sample样品incoming material to be inspected进货待验description品名steel/rolled steel钢材Material statistics sheet物料统计明细表meeting minutes会议记录meeting type 会别location地点chairman主席present members出席人员subject主题conclusion结论decision items决议事项approved by / checked by / preparedby核准/审核/承办PCE assembly production schedulesheetPCE组装厂生产排配表model机锺work order工令revision版次remark备注production control confirmation生产确认checked by初审approved by核准department部门Stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别quality品质prepared by制表notes说明Year-end physical inventory differenceanalysis sheet年终盘点差异分析表physical inventory盘点数量difference quantity差异量cause analysis原因分析raw materials原料materials物料finished product成品45semi-finished product 半成品 packing materials 包材good product/accepted goods/ accepted parts/good parts 良品defective product/non-good parts 不良品disposed goods 处理品 warehouse/hub 仓库 on way location 在途仓 oversea location 海外仓spare parts physical inventory list 备品盘点清单skid/pallet 栈板 tox machine 自铆机 wire EDM 线割 EDM 放电机 coil stock 卷料 sheet stock 片料 tolerance 工差 score=groove 压线 cam block 滑块 pilot 导正筒 trim 剪外边 pierce 剪内边 drag form 压锻差slug hole 废料孔 feature die 公母模 expansion dwg 展开图 radius 半径 shim(wedge)楔子 torch-flame cut 火焰切割 set screw 止付螺丝 form block 折刀 stop pin 定位销round pierce punch=die button 圆冲子 shape punch=die insert 异形子 stock locater block 定位块 under cut=scrap chopper 清角 active plate 活动板 baffle plate 挡块 cover plate 盖板 male die 公模 female die 母模 groove punch 压线冲子 air-cushion eject-rod 气垫顶杆 spring-box eject-plate 弹簧箱顶板 bushing block 衬套 insert 入块 club car 高尔夫球车 capability 能力 parameter 参数factor 系数 phosphate 皮膜化成 viscosity 涂料粘度 alkalidipping 脱脂 main manifold 主集流脉 bezel 斜视规 blanking 穿落模 dejecting 顶固模demagnetization 去磁;消磁 high-speed transmission 高速传递 heat dissipation 热传 rack 上料 degrease 脱脂 rinse 水洗alkaline etch 龄咬 desmut 剥黑膜 D.I. rinse 纯水次 Chromate 铬酸处理 Anodize 阳性处理 seal 封孔 revision 版次 part number/P/N 料号 good products 良品 scraped products 报放心品 defective products 不良品 finished products 成品 disposed products 处理品barcode 条形码 flow chart 流程窗体 assembly 组装 stamping 冲压 molding 成型 spare parts=buffer 备品 coordinate 坐标 dismantle the die 折模 auxiliary function 辅助功能 poly-line 多义线 heater band 加热片 thermocouple 热电偶 sand blasting 喷沙 grit 砂砾derusting machine 除锈机 degate 打浇口 dryer 烘干机 induction 感应 induction light 感应光 r e s p o n s e =r e a c t i o n =i n t e r a cram连杆 edge finder 巡边器 concave 凸 convex 凹 short 射料不足 nick 缺口 speck 瑕疪 shine 亮班 splay 银纹 gas mark 焦痕 delamination 起鳞 cold slug 冷块 blush 导色 gouge 沟槽;凿槽 satin texture 段面咬花 witness line 证示线 patent 专利 grit沙砾 granule=peuet=grain 细粒 grit maker 抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate钣金lathe车mill锉plane刨grind磨drill铝boring镗blister气泡fillet镶;嵌边through-hole form通孔形式roller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴angular offset角度偏差velocity速度torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机模具工程类plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号)shearing剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱dowel pin固定销coil spring弹簧lifter pin顶料销pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板)stripping plate内外打(脱料板)outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板6零件类punch冲头insert入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶杆trimming punch切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch压筋冲子guide plate定位板sliding block滑块active plate活动板lower sliding plate下滑块板upper holder block上压块upper mid plate上中间板spring box弹簧箱bushing block衬套cover plate盖板guide pad导料块塑件&模具相关英文compre sion molding压缩成型flash mold溢流式模具split mold分割式模具cavity型控母模core模心公模taper锥拔leather cloak仿皮革shiver饰纹flow mark流痕welding mark溶合痕self tapping screw自攻螺丝striper plate脱料板piston活塞cylinder汽缸套chip细碎物handle mold手持式模具移转成型用模具encapsulationmolding低压封射出成型用模具two plate两极式（模具）well type蓄料井insulated runner绝缘浇道方式hot runner热浇道runner plat浇道模块valve gate阀门浇口band heater环带状的电热器spindle阀针spear head刨尖头slag well冷料井cold slag冷料渣air vent排气道h=0.02~0.05mmw=3.2mmL=3~5mmwelding line熔合痕eject pin顶出针knock pin顶出销return pin回位销反顶针sleeve套筒stripper plate脱料板insert core放置入子guide pin导销subzero深冷处理three plate三极式模具runner system浇道系统stress crack应力电裂orientation定向sprue gate射料浇口，直浇口nozzle射嘴sprue lock pin料头钩销(拉料杆)slag well冷料井side gate侧浇口edge gate侧缘浇口tab gate搭接浇口film gate薄膜浇口flash gate闸门浇口slit gate缝隙浇口fan gate扇形浇口dish gate因盘形浇口H=F=1/2t~1/5tT=2.5~3.5mmdiaphragm gate隔膜浇口ring gate环形浇口submarine gate潜入式浇口tunnel gate隧道式浇口pin gate针点浇口Φ0.8~1.0mmRunner less无浇道(sprue less)无射料管方式long nozzle延长喷嘴方式sprue浇口;溶渣质量人员名称类QC quality control 品质管理人员FQC final quality control 终点质量管理人员7IPQC in process quality control 制程中的质量管理人员OQC output quality control 最终出货质量管理人员IQC incoming quality control 进料质量管理人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 质量工程人员质量保证类FAI first article inspection 新品首件检查FAA first article assurance 首件确认TVR tool verification report 模具确认报告3B 3B 模具正式投产前确认CP capability index 能力指数CPK capability index of process 模具制程能力参数SSQA standardized supplier quality 合格供货商质量评估OOBA out of box audit 开箱检查QFD quality function deployment 质量机能展开FMEA failure model effectiveness analysis 失效模式分析8D 8 disciplines 8项回复内容FA final audit 最后一次稽核CAR corrective action request 改正行动要求corrective action report 改正行动报告FQC运作类AQL Acceptable Quality Level 运作类允收质量水平S/S Sample size 抽样检验样本大小ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的AOQ Average Output Quality 平均出厂质量AOQL Average Output Quality Level 平均出厂质量Q/R/S Quality/Reliability/Service 质量/可靠度服务MIL-STD Military-Standard 军用标准S I-S IV Special I-Special IV 特殊抽样水平等级P/N Part Number 料号L/N Lot Number 特采AOD Accept On Deviation 特采UAI Use As It 首件检查报告8FPIR First Piece Inspection Report 百万分之一PPM Percent Per Million 批号制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计质量管理R Range 全距AR Average Range 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限MAX Maximum 最大值MIN Minimum 最小值GRR Gauge Reproducibility & Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸DIA Diameter 直径FREQ Frequency 频率N Number 样品数其它质量术语类QCC Quality Control Circle 品质圈QIT Quality Improvement Team 质量改善小组PDCA Plan Do Check Action 计划执行检查总结ZD Zero Defect 零缺点QI Quality Improvement 质量改善QP Quality Policy 目标方针TQM Total Quality Management 全面质量管理MRB Material Reject Bill 退货单LQL Limiting Quality Level 最低质量水平RMA Return Material Audit 退料认可QAN Quality Ameliorate Notice 质量改善活动ADM Absolute Dimension Measurement 全尺寸测量QT Quality Target 质量目标7QCTools 7 Quality Control Tools 品管七大手法通用之件类ECN Engineering Change Notes 工程变更通知(供货商)ECO Engineering Change Order 工程改动要求(客户)PCN Process Change Notice 工序改动通知PMP Product Management Plan 生产管制计划SIP Specification In Process 制程检验规格SOP Standard Operation Procedure 制造作业规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单9PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面系统文件类QC Quality System 质量系统ES Engineering Standardization 工程标准CGOO China General PCE龙华厂文件H Huston (美国)休斯敦C Compaq (美国)康伯公司C China 中国大陆A Assembly 组装(厂)S Stamping 冲压(厂)P Painting 烤漆(厂)I Intel 英特尔公司T TAIWAN 台湾IWS International Workman Standard 工艺标准ISO International Standard Organization 国际标准化组织GS General Specification 一般规格CMCS C-China M-Manufact C-Compaq S-Stamping Compaq产品在龙华冲压厂制造作业规范CQCA Q-Quality A-Assembly Compaq产品在龙华组装厂品管作业规范CQCP P-Painting Compaq产品在龙华烤漆厂品管作业规范部类PMC Production & Material Control 生产和物料控制PPC Production Plan Control 生产计划控制MC Material Control 物料控制ME Manufacture Engineering 制造工程部PE Project Engineering 产品工程部A/C Accountant Dept 会计部P/A Personal & Administration 人事行政部DC Document Center 资料中心QE Quality Engineering 质量工程(部)QA Quality Assurance 质量保证(处)QC Quality Control 质量管理(课)PD Product Department 生产部LAB Library 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部P Painting 烤漆(厂)A Assembly 组装(厂)S Stamping 冲压(厂)10生产类PCS Pieces 个(根,块等)PRS Pairs 双(对等)CTN Carton 卡通箱PAL Pallet/skid 栈板PO Purchasing Order 采购订单MO Manufacture Order 生产单D/C Date Code 生产日期码ID/C Identification Code (供货商)识别码SWR Special Work Request 特殊工作需求L/N Lot Number 批号P/N Part Number 料号其它OEM Original Equipment Manufacture 原设备制造PCE Personal Computer Enclosure 个人计算机外设PC Personal Computer 个人计算机CPU Central Processing Unit 中央处理器SECC SECC` 电解片SGCC SGCC 热浸镀锌材料NHK North of Hongkong 中国大陆PRC People's Republic of China 中国大陆U.S.A the United States of America 美国As Soon As Possible 尽可能快的E-MAIL Electrical-Mail 电子邮件N/A Not Applicable 不适用QTY Quantity 数量VS 以及REV Revision 版本JIT Just In Time 零库存I/O Input/Output 输入/输出OK Ok 好NG Not Good 不行,不合格C=0 Critical=0 极严重不允许ESD Electry-static Discharge 静电排放5S 希腊语整理,整顿,清扫,清洁,教养A TIN Attention 知会CC Carbon Copy 副本复印相关人员APP Approve 核准,认可,承认CHK Check 确认AM Ante Meridian 上午PM Post Meridian 下午CD Compact Disk 光盘CD-ROM Compact Disk Read-Only Memory 只读光盘FDD Floppy Disk Drive 软盘机HDD Hard Disk Drive 碟碟机REF Reference 仅供参考CONN Connector 连接器CA V Cavity 模穴CAD Computer Aid Design 计算器辅助设计ASS'Y Assembly 装配,组装MAT'S Material 材料IC Integrated Circuit 集成电路T/P True Position 真位度TYP Type 类型WDR Weekly Delivery Requirement 周出货需求CT Cycle Time 制程周期L/T Lead Time 前置时间(生产前准备时间)S/T Standard Time 标准时间P/M Product Market 产品市场3C Computer,Commumcation,Consumer electronic's 消费性电子5WIH When,Where,Who,What,Why,How to5M Man,Machine,Material,Method,Measurement4MIH Man,Materia,Money,Method,Time 人力,物力,财务,技术,时间(资源) SQA Strategy Quality Assurance 策略质量保证DQA Design Quality Assurance 设计质量保证MQA Manufacture Quality Assurance 制造质量保证SSQA Sales and service Quality Assurance 销售及服务质量保证LRR Lot Reject Rate 批退率BS Brain storming 脑力激荡EMI Electronic Magnet Inspect 高磁测试FMI Frequency Modulated Inspect 高频测试B/M Boar/Molding (flat cable)C/P Connector of PCA/P AssemblySPS Switching power supply 电源箱DT Desk Top 卧式(机箱)MT Mini-Tower 立式(机箱)DVD Digital Video DiskVCD Video Compact DiskLCD Liquid Crystal DisplayCAD Computer AID DesignCAM Computer AID ManufacturingCAE Computer AID EngineeringABIOS Advanced Basic in put/output system 先进的基本输入/输出系统CMOS Complementary Metal-Oxide-Semiconductor Transistor 互补金属氧化物半导体PDA Personal Digital Assistant 个人数字助理IC Integrated Circuit 集成电路ISA Industry Standard Architecture 工业标准体制结构MCA Micro Channel Architecture 微信道结构EISA Extended Industry Standard Architecture 扩充的工业标准结构SIMM Single in-line memory module 单项导通汇流组件DIMM Dual in-line Memory Module 双项导通汇流组件LED Light-Emitting Diode 发光二级管FMEA Failure Mode Effectiveness 失效模式分析W/H Wire Harness 金属线绪束集组件F/C Flat Cable 排线PCB Printed Circuit Board 印刷电路板CAR Correction Action Report 改善报告NG Not Good 不良WPR Weekly Delivery Requirement 周出货要求PPM Parts Per Million 百万分之一TPM Total Production Maintenance 全面生产保养MRP Material Requirement Planning 物料需计划OS Operation System 操作系统TBA To Be Design 待定,定缺D/C Drawing ChangeP/P Plans & ProcedureEMI Electrical-Music Industry 电子音乐工业RFI Read Frequency Input 读频输入MMC Maximum Material ConditionMMS Maximum Material SizeLMC Least Material ConditionLMS Least Material Size。
电子厂常用英语
知识就昱力量一、常用术语Chain conveyor 链条传送 Solder iron 烙铁 Flux 助焊剂3CComputer 电脑类产品 Con sumer electr onics 消费性电子产品 Communi catio n 通讯类产品FOUR CONTROL SY STEM 四大管制系统Engin eeri ng con trol system 工程管制系统 Quality control system 品质管制系统Manu facturi ng con trol system 生产管制系统 Man ageme nt control system 经营管制系统PDCA Pla n Do Check Acti on计划执行检查总结 面SMT Surface mounting tech no logy 表面贴装技术SMD Surface moun ti ng device 表面贴装设备SMC Surface moun ti ng comp onents 表贴装元件 MIMAmanual in sert手工插件machi ne assembly机器组装 Scree n prin ter 电子印刷机 Reflow回流焊Pilot ru n试生产Ove n烤箱，烤炉 Solder 焊接Solder wett ing 焊剂润湿Profile剖面外形轮廓Chain链条7SClassification 整理(sorting, organization )-seiriRegulati on 整顿(arran geme nt, tid in ess)-seit on Cleanliness 清扫(sweeping, purity)-seiso Conservation 清洁(cleaning, cleanliness)-seiktsu Culture 教养(discipline)-shitsuke……★… 知识就昱力量Save节约Safety安全二、英文缩写品质人员名称类QC quality con trol 品质管理人员FQC final quality con trol 终点品质管制人员IPQC in process quality control 制程中的品质管制人员OQC output quality control 最终出货品质管制人员IQC incoming quality con trol 进料品质官制人员TQC total quality con trol 全面质量管理QA quality assura nee 质量保证人员OQA output quality con trol 出货质量保证人员QE quality engineering 品质工程人员品质保证类FAI first article in specti on 新品首件检查FAA first article assura nee 首件确认SSQA sta ndardized supplier quality audit 合格供应商品质评估FQC运作类AQL Acceptable Quality Level 允收品质水准ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Min or 轻微的P/N Part Number 料号L/N Lot Number 批号UAI Use As It 特采FPIR First Piece In specti on Report 首件检查报告DPPM Defective Perce nt Per Millio n 白力分之缺陷制程统计品管类SPC Statistical Process Con trol 统计制程管制SQC Statistical Quality Con trol 统计品质管制DIM Dime nsio n 尺寸DIA Diameter 直径其它品质术语类ZD Zero Defect 零缺陷QP Quality Policy 品质方针TQM Total Quality Man ageme nt 全面品质管理RMA Return Material Audit 退货认可7QCTools 7 Quality Control Tools 品管七大手法……★… 知识就昱力量通用文件类ECN Engin eeri ng Change Notice 工程变更通知（供应商）ECO Engin eeri ng Change Order 工程改动要求（客户）PCN Process Change Notice 工序改动通知PMP Product Man ageme nt Pla n 生产管制计划SIP Stan dard In specti on Procedure 制程检验标准程序SOP Sta ndard Operati on Procedure 制造作业规范BOM Bill of Material 物料清单SPEC Specificati on 规格DWG Drawi ng 图面系统文件类ISO Intern ati onal Stan dard Orga ni zation 国际标准化组织部类QE Quality Engin eeri ng 品质工程QA Quality Assura nee 品质保证LAB Laboratory 实验室IE In dustrial Engin eeri ng 工业工程R&D Research&Design设计开发部生产类PCs Pieces 个（根、块等）CTN Carton 卡通箱PAL Pallet/skid 栈板PO Purchas ing Order 采购订单MO Manufacture Or de r生产单D/C Date Code 生产日期码ID/C Ide ntificatio n Order （供应商）识别码L/N Lot Number 批号P/N Part Number 料号OEM Origi nal Equipme nt Manu facture 原设备制造QTY Qua ntity 数量NG Not Good 不行，不合格C=0 Critical=0 极严重不允许APP Approve 核准，认可，承认CHK Check 确认ASSY Assembly 装配，组装LRR Lot Reject Rate 批退率PCB Prin ted Circuit Board 印刷电路板CAR Correcti on Acti on Report 改善报告TBA To Be Assured 待疋，疋缺AVL Approved Ven dor List 许可供应商清单EOL End of Life三、专业词汇知识就昱力量组装类Assembly lineLayoutConveyorScrew driverElectric screw driverAutomati onConveying beltLove is not a maybe thing. You know whe n you love some one.组装线布置图流水线运输带起子电动起子自动化输送带。
电子厂 常用英语
镊子: Tweezers 尖嘴钳: Nose Plier 扳手: Spanner 鎯头: Hammer电烙铁: Soldering Iron 剪钳: Wire Cutter 老虎钳: Pliers 电批: Torque Driver 夹子: Clamp 三角架: Crowfood 钢网: Stencil 刮刀: Squeegee 刀片: Blade放大镜 : Visionscope 调压器 : Booster 示波器 : Oscilloscope 测试针: Toggle Pins架子: Rack 支架: Brackets锡条: Solde Bar 锡膏: Solder Paste 锡炉: Solder-Pot 浸锡: Dig-Solder焊点 : Soldering Joints 焊盘 : Pad/Land 焊接 : Welding 超声波焊接: Ultrasonic Welding回流焊接: Reflow Soldering 波峰焊接: Wave Soldering 回焊前: Pre-Reflow回焊后: Post-Reflow 回流炉: Reflow Oven 虚焊: Dewetting 假焊: Short Solder 少锡: Insufficent Solder 偏位: Misalignment 阻焊剂: Solder-Thief/Mask线路: Trace 回路: Circuit 短路: Briging/Short 线路开路: Broken Trace线路板 ; Pcb(PrintedCircuit Board) 线路板装配: Pcba( Printed Circuit Board Assembly)集成电路:Ic( Intergrated Circuit)Esd: Electrostatic Discharge: 静电放电 Esd Prevention&Damage: 静电防护与损坏Fmea: Failure Mode And Effect Analysis( 失效模式分析 ) Spc: Stastical Process Control( 统计过程控制 ) Ipc: Institute Of Packing And Interconnects( 电子电路互连与封装协会 )正极: Anode End 负极: Cathode End硬化 : Curing 配线 : Wiring 冷却硬化 : Oven-Curing 间距 : Pitch 周期: Circle Time测试 : Debug 模拟 : Simulation 毛细管现象 : Capillary Action 导体: Conductive Pattern介质材料: Dieletric Material 镀通孔: Pth( Plated Through Hole)额定电源: RatedPower 氧化: Oxide 烘干: Bake 紫外线: Ultraviolet线圈 : Winding 涂层 : Coating 溶剂 : Sovent 隔热板 : Felt 不合格品: Nonconfirming Units原料: Direct Material 辅料: Indirect Material 试产: Pilot Production量产: Mass Production X 光测试: X Ray Test 跌打测试: DropTest老化测试 : Burn-In Test 振动测试 : Vibration Test 丝印 : Spray-Paiting 烫金: Metal-Stamping注塑: Injection Molding 裂: Cracked 内翘: Warped翘起: Lift 弯: Bow 层分: Delamination 浮起: Lifting静电防护: Static Shielding 散静电: Static Dissipative 防静电: Antistatic顺时针方向: Clockwise 逆时针方向: Conterclockwise松香: Flux 松香笔: Flux Pen 红胶水: Epoxy B Adhesive 胶水: Glue 贴纸: Sticker透明胶纸: OppTape 卡板: Pallet 手推车: Trolleys 电容: Capacitor电阻: Resistor 继电器: Relay 晶振: Crystal过滤器 : Filter 二极管 : Diodes 三极管 : Triode 发光二极管: Light Emitting Diode( Led)。
电子工厂专业英语词汇大全
电子工厂专业英语词汇大全冲压、喷漆等专业词汇Assembly line组装线Layout布置图Conveyer流水线物料板Rivet table拉钉机Rivet gun拉钉枪Screw driver起子Electric screw driver电动起子Pneumatic screw driver气动起子worktable 工作桌OOBA开箱检查fit together组装在一起fasten锁紧(螺丝)fixture 夹具(治具)pallet栈板barcode条形码barcode scanner条形码扫描仪fuse together熔合fuse machine热熔机repair修理operator作业员QC品管supervisor 课长ME制造工程师MT制造生技cosmetic inspect外观检查inner parts inspect内部检查thumb screw大头螺丝lbs.inch镑、英寸EMI gasket导电条front plate前板rear plate后板chassis |'∫?si| 基座bezel panel面板power button电源按键reset button重置键Hi-pot test of SPS高源高压测试V oltage switch of SPS 电源电压接柆键sheet metal parts 冲件plastic parts塑料件SOP制造作业程序material check list物料检查表work cell工作间trolley台车carton纸箱sub-line支线left fork叉车Personnel resource department人力资源部production department生产部门planning department企划部QC Section品管科stamping factory冲压厂painting factory烤漆厂molding factory成型厂common equipment常用设备uncoiler and straightener整平机punching machine 冲床robot机械手hydraulic machine油压机lathe车床planer |'plein|刨床miller铣床grinder磨床driller钻床linear cutting线切割electrical sparkle电火花welder电焊机staker=reviting machine铆合机position职务president董事长general manager总经理special assistant manager特助factory director厂长department director部长deputy manager |'depjuti| =vice manager副理section supervisor课长deputy section supervisor =vice section supervisor副课长group leader/supervisor组长line supervisor线长assistant manager助理to move, to carry, to handle搬运be put in storage入库pack packing包装to apply oil擦油to file burr 锉毛刺final inspection终检to connect material接料to reverse material 翻料wet station沾湿台Tiana天那水cleaning cloth抹布to load material上料to unload material卸料to return material/stock to退料scraped |'skr?pid|报废scrape ..v.刮;削deficient purchase来料不良manufacture procedure制程deficient manufacturing procedure制程不良oxidation |' ksi'dei n|氧化scratch刮伤dents压痕defective upsiding down抽芽不良defective to staking铆合不良embeded lump|in'bed| |l mp|镶块feeding is not in place送料不到位stamping-missing漏冲production capacity生产力education and training教育与训练proposal improvement提案改善spare parts=buffer备件forklift叉车trailer=long vehicle拖板车compound die合模die locker锁模器pressure plate=plate pinch压板bolt螺栓name of a department部门名称administration/generalaffairs dept总务部automatic screwdriver电动启子thickness gauge厚薄规gauge(or jig)治具power wire电源线buzzer蜂鸣器defective product label不良标签identifying sheet list标示单screwdriver holder起子插座pedal踩踏板stopper阻挡器flow board流水板hydraulic handjack油压板车forklift叉车pallet栈板glove(s)手套glove(s) with exposed fingers割手套thumb大拇指forefinger食指midfinger中指ring finger无名指little finger小指band-aid创可贴industrial alcohol工业酒精alcohol container沾湿台head of screwdriver起子头sweeper扫把mop拖把vacuum cleaner吸尘器rag 抹布garbage container灰箕garbage can垃圾箱garbage bag垃圾袋chain链条jack升降机production line流水线chain链条槽magnetizer加磁器lamp holder灯架to mop the floor拖地to clean the floor扫地to clean a table擦桌子air pipe 气管packaging tool打包机packaging打包missing part漏件wrong part错件excessive defects过多的缺陷critical defect极严重缺陷major defect主要缺陷minor defect次要缺陷not up to standard不合规格dimension/size is a little bigger尺寸偏大(小)cosmetic defect外观不良slipped screwhead / slippery screw head螺丝滑头slipped screwhead / shippery screw thread滑手speckle斑点mildewed=moldy=mouldy发霉rust生锈deformation变形burr(金属)flash(塑件)毛边poor staking铆合不良excessive gap间隙过大grease/oil stains油污inclusion杂质painting peel off脏污shrinking/shrinkage缩水mixed color杂色scratch划伤poor processing 制程不良poor incoming part事件不良fold of packaging belt打包带折皱painting make-up补漆discoloration羿色water spots水渍polishing/surface processing表面处理exposed metal/bare metal金属裸露lack of painting烤漆不到位safety安全quality品质delivery deadline交货期cost成本engineering工程die repair模修enterprise plan = enterprise expansion projects企划QC品管die worker模工production, to produce生产equipment设备to start a press开机stop/switch off a press关机classification整理regulation整顿cleanness清扫conservation清洁culture教养qualified products, up-to-gradeproducts良品defective products, not up-to-gradeproducts不良品waste废料board广告牌feeder送料机sliding rack滑料架defective product box不良品箱die change 换模to fix a die装模to take apart a die拆模to repair a die修模packing material包材basket蝴蝶竺plastic basket胶筐isolating plate baffle plate; barricade隔板carton box纸箱to pull and stretch拉深to put material in place, to cut material, to input落料to impose lines压线to compress, compressing压缩character die字模to feed, feeding送料transportation运输(be)qualified, up to grade合格not up to grade, not qualified不合格material change, stockchange材料变更feature change 特性变更evaluation评估prepare for, make preparations for 准备parameters参数rotating speed, revolution转速manufacture management制造管理abnormal handling异常处理production unit生产单位lots of production生产批量steel plate钢板roll material卷料manufacture procedure制程operation procedure作业流程to revise, modify修订to switch over to, switch---tothrow--over switching over切换engineering, project difficulty工程瓶颈stage die工程模automation自动化to stake, staking, riveting铆合add lubricating oil加润滑油shut die架模shut height of a die架模高度analog-mode device类模器die lifter举模器argon welding氩焊Vocabulary for stamping冲压常词汇stamping, press冲压punch press, dieing out press冲床uncoiler & strainghtener整平机feeder送料机rack, shelf, stack料架cylinder油缸robot机械手taker取料机conveyer belt输送带transmission rack输送架top stop上死点bottom stop下死点one stroke一行程inch寸动to continue, cont.连动to grip(material)吸料location lump, locating piece, block stop 定位块reset复位smoothly顺利dent压痕scratch刮伤deformation变形filings铁削to draw holes抽孔inquiry, search for查寻to stock, storage, in stock库存receive领取approval examine and verify审核processing, to process加工delivery, to deliver 交货To return/delivery to. to send delivery back to return of goods退货registration登记registration card登记卡to control管制to put forward and hand in提报safe stock安全库存acceptance = receive验收to notice通知application form for purchase请购单consume, consumption消耗to fill in填写abrasion磨损reverse angle = chamfer倒角character die字模to collect, to gather收集failure, trouble故障statistics统计demand and supply需求career card履历卡to take apart a die卸下模具to load a die装上模具to tight a bolt拧紧螺栓to looser a bolt拧松螺栓to move away a die plate移走模板easily damaged parts易损件standard parts标准件breaking.(be)broken,(be)cracked 断裂to lubricate润滑common vocabulary for die engineering模具工程常用词汇die 模具figure file, chart file图档cutting die, blanking die冲裁模progressive die, follow (-on)die连续模compound die复合模punched hole冲孔panel board镶块to cut edges=side cut=side scrap切边to bending折弯to pull, to stretch拉伸Line stretching, line pulling线拉伸engraving, to engrave刻印upsiding down edges翻边to stake铆合designing, to design设计design modification设计变化die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate, front board模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板upper padding plate blank上垫板spare dies模具备品spring 弹簧bolt螺栓document folder活页夹file folder资料夹to put file in order整理资料spare tools location手工备品仓first count初盘人first check初盘复棹人second count 复盘人second check复盘复核人equipment设备waste materials废料work in progress product在制品casing = containerization装箱quantity of physical inventory second count 复盘点数量Quantity of customs count会计师盘,点数量the first page第一联filed by accounting department for reference会计部存查end-user/using unit(department)使用单位Summary of year-end physicalinventory bills年终盘点截止单据汇总表bill name单据名称This sheet and physical inventory listwill be sent to accounting departmenttogether (Those of NHK will be sent tofinancial department)本表请与盘点清册一起送会计部－(NHK厂区送财会部)Application status records of year-endphysical inventory List and physicalinventory card 年终盘点卡与清册使用－状况明细表Blank and waste sheet NO.空白与作废单号plate电镀mold成型material for engineering mold testing 工程试模材料not included in physical inventory不列入盘点sample样品incoming material to be inspected进货待验description品名steel/rolled steel钢材Material statistics sheet物料统计明细表meeting minutes会议记录meeting type 会别distribution department分发单位location地点chairman主席present members出席人员subject主题conclusion结论decision items决议事项responsible department负责单位pre-fixed finishing date预定完成日approved by / checked by / prepared by核准/审核/承办PCE assembly production schedule sheetPCE组装厂生产排配表model机锺work order工令revision版次remark备注production control confirmation生产确认checked by初审approved by核准department部门Stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别quality品质prepared by制表notes说明Year-end physical inventory difference analysis sheet年终盘点差异分析表physical inventory盘点数量physical count quantity账面数量difference quantity差异量cause analysis原因分析raw materials原料materials物料finished product成品semi-finished product半成品packing materials包材good product/accepted goods/ accepted parts/good parts 良品defective product/non-good parts不良品disposed goods处理品warehouse/hub仓库on way location在途仓oversea location海外仓spare parts physical inventory list备品盘点清单spare molds location模具备品仓skid/pallet栈板tox machine自铆机wire EDM线割EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差pocket for the punch head挂钩槽slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)楔子torch-flame cut火焰切割set screw止付螺丝form block折刀stop pin定位销round pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject-rod气垫顶杆spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块club car高尔夫球车capability能力parameter参数factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂main manifold主集流脉bezel斜视规blanking穿落模dejecting顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传rack上料degrease脱脂rinse水洗alkaline etch龄咬desmut剥黑膜D.I. rinse纯水次Chromate铬酸处理Anodize阳性处理seal封孔revision版次part number/P/N料号good products良品scraped products报放心品defective products不良品finished products成品disposed products处理品barcode条形码flow chart流程窗体assembly组装stamping冲压molding成型spare parts=buffer备品coordinate坐标dismantle the die折模auxiliary function辅助功能poly-line多义线heater band 加热片thermocouple热电偶sand blasting喷沙derusting machine除锈机degate打浇口dryer烘干机induction感应induction light感应光response=reaction=interaction感应ram连杆edge finder巡边器concave凸convex凹short射料不足nick缺口speck瑕疪shine亮班splay 银纹gas mark焦痕delamination起鳞cold slug冷块blush 导色gouge沟槽;凿槽satin texture段面咬花witness line证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate钣金mill锉plane刨grind磨drill铝boring镗blister气泡fillet镶;嵌边through-hole form通孔形式roller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴angular offset角度偏差velocity速度production tempo生产进度现状torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金tungsten high speed steel钨高速的moly high speed steel钼高速的organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机模具工程类plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸) draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号) shearing剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱inner hexagon screw内六角螺钉dowel pin固定销coil spring弹簧lifter pin顶料销eq-height sleeves=spool等高套筒pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板)stripping plate内外打(脱料板)outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板零件类punch冲头insert入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶杆trimming punch切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch压筋冲子reel-stretch punch卷圆压平冲子guide plate定位板sliding block滑块sliding dowel block滑块固定块active plate活动板lower sliding plate下滑块板upper holder block上压块upper mid plate上中间板spring box弹簧箱spring-box eject-rod弹簧箱顶杆spring-box eject-plate弹簧箱顶板bushing block衬套cover plate盖板guide pad导料块塑件&模具相关英文compre sion molding压缩成型flash mold溢流式模具plsitive mold挤压式模具split mold分割式模具cavity型控母模core模心公模taper锥拔leather cloak仿皮革shiver饰纹flow mark流痕welding mark溶合痕post screw insert螺纹套筒埋值self tapping screw自攻螺丝striper plate脱料板piston活塞cylinder汽缸套chip细碎物handle mold手持式模具移转成型用模具encapsulation molding低压封装成型射出成型用模具two plate两极式（模具）well type蓄料井insulated runner绝缘浇道方式hot runner热浇道runner plat浇道模块valve gate阀门浇口band heater环带状的电热器spindle阀针spear head刨尖头slag well冷料井cold slag冷料渣air vent排气道h=0.02~0.05mmw=3.2mmL=3~5mmwelding line熔合痕eject pin顶出针knock pin顶出销return pin回位销反顶针sleeve套筒stripper plate脱料板insert core放置入子runner stripper plate浇道脱料板guide pin导销eject rod (bar)（成型机）顶业捧subzero深冷处理three plate三极式模具runner system浇道系统stress crack应力电裂orientation定向sprue gate射料浇口，直浇口nozzle射嘴sprue lock pin料头钩销(拉料杆) slag well冷料井side gate侧浇口edge gate侧缘浇口tab gate搭接浇口film gate薄膜浇口flash gate闸门浇口slit gate缝隙浇口fan gate扇形浇口dish gate因盘形浇口H=F=1/2t~1/5tT=2.5~3.5mmdiaphragm gate隔膜浇口ring gate环形浇口submarine gate潜入式浇口tunnel gate隧道式浇口pin gate针点浇口Φ0.8~1.0mmRunner less无浇道(sprue less)无射料管方式long nozzle延长喷嘴方式sprue浇口;溶渣质量人员名称类QC quality control 品质管理人员FQC final quality control 终点质量管理人员IPQC in process quality control 制程中的质量管理人员OQC output quality control 最终出货质量管理人员IQC incoming quality control 进料质量管理人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 质量工程人员质量保证类FAI first article inspection 新品首件检查FAA first article assurance 首件确认TVR tool verification report 模具确认报告3B 3B 模具正式投产前确认CP capability index 能力指数CPK capability index of process 模具制程能力参数SSQA standardized supplier quality 合格供货商质量评估OOBA out of box audit 开箱检查QFD quality function deployment 质量机能展开FMEA failure model effectiveness analysis 失效模式分析8D 8 disciplines 8项回复内容FA final audit 最后一次稽核CAR corrective action request 改正行动要求corrective action report 改正行动报告FQC运作类AQL Acceptable Quality Level 运作类允收质量水平S/S Sample size 抽样检验样本大小ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的AOQ Average Output Quality 平均出厂质量AOQL Average Output Quality Level 平均出厂质量Q/R/S Quality/Reliability/Service 质量/可靠度服务MIL-STD Military-Standard 军用标准S I-S IV Special I-Special IV 特殊抽样水平等级P/N Part Number 料号L/N Lot Number 特采AOD Accept On Deviation 特采UAI Use As It 首件检查报告FPIR First Piece Inspection Report 百万分之一PPM Percent Per Million 批号制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计质量管理R Range 全距AR Average Range 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限MAX Maximum 最大值MIN Minimum 最小值GRR Gauge Reproducibility & Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸DIA Diameter 直径FREQ Frequency 频率N Number 样品数其它质量术语类QCC Quality Control Circle 品质圈QIT Quality Improvement Team 质量改善小组PDCA Plan Do Check Action 计划执行检查总结ZD Zero Defect 零缺点QI Quality Improvement 质量改善QP Quality Policy 目标方针TQM T otal Quality Management 全面质量管理MRB Material Reject Bill 退货单LQL Limiting Quality Level 最低质量水平RMA Return Material Audit 退料认可QAN Quality Ameliorate Notice 质量改善活动ADM Absolute Dimension Measurement 全尺寸测量QT Quality Target 质量目标7QCT ools 7 Quality Control T ools 品管七大手法通用之件类ECN Engineering Change Notes 工程变更通知(供货商) ECO Engineering Change Order 工程改动要求(客户) PCN Process Change Notice 工序改动通知PMP Product Management Plan 生产管制计划SIP Specification In Process 制程检验规格SOP Standard Operation Procedure 制造作业规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面系统文件类QC Quality System 质量系统ES Engineering Standardization 工程标准CGOO China General PCE龙华厂文件H Huston (美国)休斯敦C Compaq (美国)康伯公司C China 中国大陆A Assembly 组装(厂)S Stamping 冲压(厂)P Painting 烤漆(厂)I Intel 英特尔公司T TAIWAN 台湾IWS International Workman Standard 工艺标准ISO International Standard Organization 国际标准化组织GS General Specification 一般规格CMCS C-China M-Manufact C-Compaq S-Stamping Compaq 产品在龙华冲压厂制造作业规范CQCA Q-Quality A-Assembly Compaq产品在龙华组装厂品管作业规范CQCP P-Painting Compaq 产品在龙华烤漆厂品管作业规范部类PMC Production & Material Control 生产和物料控制PPC Production Plan Control 生产计划控制MC Material Control 物料控制ME Manufacture Engineering 制造工程部PE Project Engineering 产品工程部A/C Accountant Dept 会计部P/A Personal & Administration 人事行政部DC Document Center 资料中心QE Quality Engineering 质量工程(部)QA Quality Assurance 质量保证(处)QC Quality Control 质量管理(课)PD Product Department 生产部LAB Library 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部P Painting 烤漆(厂)A Assembly 组装(厂) S Stamping 冲压(厂)。
电子厂工厂常用英语
May
十月
October
星期三
Wednesday 一月 January
六月
June
十一月
November
星期四
Thursday 二月 February
七月
July
十二月
December
星期五
物料类
Friday 三月 March
八月
Байду номын сангаас
August
(material)
clamp
夹子,夹片 shield 屏弊
box inner box tie
重金属类
PBBS cd
蓝图常用英 语单词
REV sheet protract NOTES Q'TY temperature check
纸箱 内盒 扎带
多溴联苯 镉
screen 隔板
waterpro oMfagbiacg tie
防水袋 魔带
Phthalat e
邻苯二甲酸盐
常
CSA — 加拿大
标AW准G协—会美国线
规(American UL— 安规 EICC----电子行
保险商试验
所（
PV----产
业行为准则
颜色(color)
品鉴定
用英语
EMC--电磁 兼容性
EMI---电磁干 扰
violet
紫罗蓝色 black 黑色
orange
橙色
green
绿色
red
红色
wine 暗红色
装配 紧急的,压,冲 压 裁切尺寸
material(BOM)
volume
材质
shown
显示
电子厂 常用英语
镊子: Tweezers 尖嘴钳: Nose Plier 扳手: Spanner 鎯头: Hammer电烙铁: Soldering Iron 剪钳: Wire Cutter 老虎钳: Pliers 电批: Torque Driver夹子: Clamp 三角架: Crowfood 钢网: Stencil 刮刀: Squeegee 刀片: Blade放大镜: Visionscope 调压器: Booster 示波器: Oscilloscope 测试针: Toggle Pins架子: Rack 支架: Brackets锡条: Solde Bar 锡膏: Solder Paste 锡炉: Solder-Pot 浸锡: Dig-Solder焊点: Soldering Joints 焊盘: Pad/Land 焊接: Welding 超声波焊接: Ultrasonic Welding回流焊接: Reflow Soldering 波峰焊接: Wave Soldering 回焊前: Pre-Reflow回焊后: Post-Reflow 回流炉: Reflow Oven虚焊: Dewetting 假焊: Short Solder少锡: Insufficent Solder偏位: Misalignment阻焊剂: Solder-Thief/Mask线路: Trace回路: Circuit短路: Briging/Short 线路开路: Broken Trace线路板; Pcb(Printed Circuit Board) 线路板装配: Pcba( Printed Circuit Board Assembly)集成电路:Ic( Intergrated Circuit)Esd: Electrostatic Discharge: 静电放电Esd Prevention&Damage: 静电防护与损坏Fmea: Failure Mode And Effect Analysis(失效模式分析) Spc: Stastical Process Control(统计过程控制) Ipc: Institute Of Packing And Interconnects(电子电路互连与封装协会)正极: Anode End 负极: Cathode End硬化: Curing 配线: Wiring 冷却硬化: Oven-Curing 间距: Pitch 周期: Circle Time测试: Debug 模拟: Simulation 毛细管现象: Capillary Action 导体: Conductive Pattern介质材料: Dieletric Material 镀通孔: Pth( Plated Through Hole)额定电源: Rated Power 氧化: Oxide 烘干: Bake 紫外线: Ultraviolet线圈: Winding 涂层: Coating 溶剂: Sovent 隔热板: Felt 不合格品: Nonconfirming Units原料: Direct Material 辅料: Indirect Material 试产: Pilot Production量产: Mass Production X 光测试: X Ray Test 跌打测试: Drop Test老化测试: Burn-In Test 振动测试: Vibration Test 丝印: Spray-Paiting 烫金: Metal-Stamping 注塑: Injection Molding 裂: Cracked 内翘: Warped翘起: Lift 弯: Bow 层分: Delamination 浮起: Lifting静电防护: Static Shielding 散静电: Static Dissipative 防静电: Antistatic顺时针方向: Clockwise 逆时针方向: Conterclockwise松香: Flux 松香笔: Flux Pen 红胶水: Epoxy B Adhesive 胶水: Glue 贴纸: Sticker透明胶纸: Opp Tape 卡板: Pallet 手推车: Trolleys 电容: Capacitor电阻: Resistor 继电器: Relay 晶振: Crystal过滤器: Filter 二极管: Diodes 三极管: Triode 发光二极管: Light Emitting Diode( Led)。
电子类常用英文单词_电子厂常用英文
1.生產規格 1.1BOM:料表 1.2S/N:生產注意 1.3:ES :電氣規格 1.4:PK:電路圖 1.5:PD:外觀尺寸Example:DPS-ES:Input character 輸入特性 1.1Input 輸入電壓 1.2Input 輸入頻率 1.3Max 最大輸入 1.4Inrush 突增電流 1.5Efficenc 效率:6（指115/Noise test 雜訊測試 Static output 靜態輸出Dynamic 動態輸出 Rise time DC 輸出 Hold up time DC 輸出Protectio n:保護OVP(ove 過電壓保OPP(ove 過功率保OCP(ove 過電流保OTP(ove 過溫度保 Short circuit 短路保護Hi-pot(diele 耐電壓測 1.1Primary 初級對次 1.2Primary 初級對地 1.3Secondar 次級對地 1.4Insulatio 絕緣阻抗 1.5Leakage 漏電流Electrical 常用單regulatio n 調voltage /current ripple /noise /frequenc y / load no power (NOP ）full load /low load broken /blow out damage /adjust open /short oscillosc opeSPEC(規格）常model:機種revision:版本issued date:P/N:品名，discrption : 說remark:備注reported by:checked by:approved by:2.FN(fact orynoice):工廠變更通知 /ECN(En gineering change notice)工程變更 2.1 FN 實施方式：Immediat ed change 立即變更Running change电子类常用英文單詞2.2ECN: oldrev.(舊版本）newrev.(新版本）drawingno /customer/(圖號 / 客戶 / 變更依據)3.Department3.1MFG:manufacturi制造 3.1.1AI: auto insertion 自動插件3.1.2preformi加工3.1.3 SMD 自動粘著3.2 QA:qualityassurance品保3.2.1 VQA 進料品質保證3.2.2PQC ,FQC 製程品管3.2.3Calibrati on , safety 儀校，安規3.3 PE:production engineeri 制造工程3.3.1TE:test engineeri 測試工程3.3.2 ME:mechanical engineeri 機械工程3.3.3 IE:industrial engineeri 工業工程3.4HR:huma n 人力資源3.5Material物料 3.5.1PC:productioncontrol生管 3.5.2purchasin采購 3.5.3warehous倉庫 3.6ENG:engineering工程 3.6.1documen t 資料中心4. Safety4.1UL(Unde rwriters Laborato ries)美國保險協會實驗室4.2 CSA(Canadian Standard s Associati 加拿大標準協會4.3 TUV 德國技術監護協會4.4 VDE 德國電氣標準4.5 NEMKO 挪威電氣標準4.6 DEMKO 丹麥電氣標準4.7CCEE(C hina Commiss ion for Conformi ty中國電工產品認證委員會Certification ofElectronialEquipment)4.8 CCIB(Ch inaCommod ity Inspectio n 中國商品檢驗局5. Other 其他FAX(傳真): date,to,f m,subject ,dear,TK S,bestFAR: issue,des cription,c orrective action,pr eventive action, analysis, defect,fai lure,supp lier/vend ISO:Inter nation Organiza tion for Standardi zation 國際標準化組織Quality Manual:品質手冊Procedu re: 作業程序Quality policy:QualityReliabilityExcellence品質至上信賴第一追求卓越Contraction(縮寫)6.Voca bulary:詞AQL:acceptqualitylecer允收水準ATS:autotestsystem自動測試系統6.1 contraction 縮寫CR:critical嚴重6.2 compon ent 零件ESD:electrostaticdischarge靜電放電6.3 process 制程FET:fieldeffectivetransistor場效電晶體6.4electric al電氣ICT: in-circuiltest線路測試6.5time 時間MA:major主要6.6 ver 動詞MI:minor次要6.7 non 名詞MRB:materialreciewboard不良材料審核組6.8 color 顏色NTC:negativetemperatirecharacteristic熱敏電阻O/I:operationinstruction工作指導書PWM:pulsewidthmodification脈波寬調整S/N:seriesnumber序號PDP C: proc ess, decision ,pro gra m,c hart SMD:surfacemountingdevice表面沾著QC CA: qual ity cont rol circl e activitie s 品管圈活動WIP:work inprogress半成品(工作進行中)CW QC: com pan y-wid e qual itycont rol 全面品管JIT: justin timeQC CA: qual ity cont rol circl e activitie s 品管圈活動IR:infra-red紅外線的CW QC: com pan y-wid e qual itycont rol全面品管bobbin線軸shield背板bridge橋式整流triode三極管cable束帶tape膠布capactit電容screw自攻螺case外殼screw機械螺ceramic陶瓷電容termina端子chip晶片電容transfor變壓器chip晶片電阻transist電晶體choke線圈tube套管connect連接器varistor突波吸control基板VR(vari可變電diode二極體washer墊片epoxy樹脂zener齊納fan風扇ProcesFET場效電晶assembl組立filter濾波器burn-崩應fuse保險絲compon零件fuse保險絲底flux助焊劑fuse 保險絲底functio 功能測glue 膠gravity 比重heatsin 散熱片Hi-pot 耐高壓IC集成電路insertio 插件inducto 電感ORT 可靠度insulato 絕緣片packing 包裝jumper 跳線solder 錫爐label 標簽station 站別lock 接地唾形supplier 廠商NTC 熱敏電阻tempera 溫度nut 螺絲帽humidit 濕度output 輸出線torque 扭距output 輸出線touch-補焊(二PCB 電路板Time(photo 光藕合二Jan.(Jan 一月regulato 穩壓器Feb.(Fe 二月resistor 電阻Mar.(M 三月ricer 鉚釘Apr.(A 四月screw 螺絲May 五月socket 插座Jun.(Ju 六月solder 錫棒Jul.(Jul 七月sping 彈簧墊片Aug.(A 八月stand-支柱Sept.(S 九月star 星形墊片Oct.(Oc 十月switch 開關Nov.(N 十一月Dec.(D 十二月8.Timafter 在……之後month 月份before 在……period 期間date 日期quarter 季layout 設計圖since 從…..location 位置week周manage 經理method 方法9.Ver(model 機種change 改變noise 噪音check 檢查operato 作業員come 來pallet 棧板damage 損傷paper 紙張find 發現plan 設劃fix 修理position 位置go 去proble 問題happen 發生procedu 程序improv 改善product 產品insert 插入product 生產issue 發行record 記錄make 做,使remark 備注pay 付給report 報告produce 產生require 要求provide 提供sample 樣品receive 收到target 目標replace 代替technici 技術員send 發出trace (基板)線take 拿,采取waybill運貨單touch 踫觸wind 纏(盤,卷)LED 發光二極tubber 腳墊TEFLO 鐵弗龍套10.Non(名11.Col or(顏action 動作,措施black 黑色analysis 分析blue 藍色conditio 條件brown 棕色data 資料gold 金色defect 缺點gray 灰色disposit 處置green 綠色enginee 工程師orange 橙色failure 失敗red 紅色file 文件夾silver 銀色inspect檢驗員violet(p 紫色white 白色yellow黃色Spe cific BO M:Spe ES: Elec PK: Sch ema tic电PD: Phy sical dim ensi on外观尺ES: Inpu t char acte ristic s输Inpu t volta ge rang e输入电压Inpu t freq uen cy rang e输Max . inpu t AC curr ent最大输入Inru sh curr ent (col d start )突增电流(冷开60% Min. At nom inal line 效率: 60% ,一般电压(指除非另有说Nois e test噪声测Stati c outp ut char acte ristic s静态输出特Dyn amic outp ut char acte ristic s动态输出Rise timeDC 输出电压上升DC 输出电压持续时间Prot ectio n:OVP (ove r volta ge prot ectio n)过电OPP (ove r pow er prot ectio n )过功OC P (ove r curr ent prot ectio n)OTP (ove r tem p. prot ectio n)过Shor t circu it prot ectio n短路保c with stand volta ge) 耐电4.1 Prim ary to seco ndar yAC TO DC 初级对4.2 Prim ary to safe ty grou ndAC TO FG 初级4.3 Sec ond ary to safe ty grou nd DC TO FG 次级4.4 Insul atio n resis tanc e绝缘阻4.5 Lea kag e curr ent 漏电SPE C (规格)常用单词el:机种revis ion:版本issu ed date : 发P/n: 品名desc ripti on:说明rem ark:备注Rep orte d by:草拟chec ked by:审核appr ove 2. FN (fact ory notic e):生产通知／ECN (eng inee ring cha nge notic e)工程变更通2.1 FN: Imm edia ted cha nge 立即变更Run ning cha nge 自然切换ECN : old rev. new rev.draw ing no.cust ome r alter atio n旧版本新版本图号客户变3.De part men t 部3.1 MF G: man ufac turin 3.1.1 AI: auto inse rtion自动插3.1. 2 pref ormi ng3.1. 3 SM D3.2 QA: quali ty assu ranc e进料品3.2. 2 PQ C,F QC3.2. 3 Cali brati on , safe ty仪3.3 PE: prod uctio n engi neer ing制造工程3.3. 1 TE: test engi neer ing测3.3. 2 ME: mec hani cal engi neer ing机strial engi neer ing 工业3.4 HR: hum an reso urce s人力资3.5 Mat erial材3.5. 1 PC: prod uctio n cont rol3.5. 2 purc hasi ng3.5. 3 ware hou se3.6 EN G: engi neer ing工ume nt cont rol 4.Sa fety 4.1 UL (Un derw riter s Lab orat orie s)美国保险协4.2 CSA (Ca nadi an Stan dard s Ass ociat ion)加拿大标准协4.3 TUV德国技术监护4.4 VDE德国电气4.5 NE MK O挪威丹麦5.Ot her 其它FAX ( 传真 ): date , to, fm, subj ect, dear , TKS , bestFAR : issu e, desc ripti on, corr ectiv e actio n, prev entiv e actio n, anal ysis,Fail ure, sup plier / venISO: Inter nati onal Org aniz atio n for Stan dard izati on国际标准化组织Qual ity Man ual:品质手册作业程6. Voc abul ary: 6.1 cont racti on 缩写Cont racti on6.2 com pon ent 零件AQL : acce pt quali ty leve r 6.3 proc ess 制程ATS : auto test syst em 自动测试6.4 elect rical 电气CR: critic al6.5 time 时间ESD : elect rost atic disc harg e 静电放6.7non 动词ICT: in-circu it test 场效晶体6.8 colo r 颜色MA: maj orMI: min orMR B: mat erial revi ew boar d 不良材料审NTC :neg ative tem pera ture char acte ris热敏电O/I:operationinstruction 工作指PWM:pulsewidthmodification 波宽S/N: seri es num ber 序号SM D: surf ace mou ntin g devi ce表面WIP : work in prog ress 半成品(工作进行JIT: just in timeIR: infra -red 红外线PDP C: proc ess, deci sion, Prog ram, charQC CA: quali ty cont rol Circl e activ ities 品管圈活动CW QC: com pan y-wide Qual ity cont rolMC R 代用Com pon ent (零件)Bob bin 线轴tape Brid ge 桥式整流tapp ing scre w 自攻螺Cabl e tie 束带term inal Cap acito r 电容tran sfor mer( XFM R)变压e 外壳tran sisto r 电Cer amic cap acito r 陶瓷电容tube Chip cap acito r 芯片电容varis tor 突波Chip resis tor 芯片电阻VR (vari able resis tanc e)可变Cho ke 线圈was her Con nect or 连接器zenrol boar d 基板Diod e(di o) 二极管proc ess (制Epo xy 脂asse Fan 风扇burn -in FET 埸效晶体管com pon ent Filte r 滤波器fluxFus e clip 保险丝座func tion test Fus e hold er 保险丝座gravGlue 胶Hi-pot test 耐高压测Heat sink 散热片inse rtion Fus e 保险丝ORT 可靠IC 集成电路pack Indu ctor 电感sold er mac hine Insul ator 绝缘片stati on Jum per wire 跳线sup plier /ven der Lab el 标签tem pera tureher 接地星形垫片torq ue NTC 热敏电阻touc h-up(T Nut 螺丝帽date Out put cabl e 输出线Tim e Out put wire 输出线Jan. PCB 电路板cou ple 光藕合二极管Mar. Reg ulat or 稳压器Apr. Resi stor 电阻Rive t 柳钉Scre w 螺丝Soc ket 插座bar 锡棒Sept Spri ng was her 弹簧垫片Stan d-off 支柱Nov. Star was her 星形垫片Dec.十Swit ch 开关CRT (cat hod e-ray tube ) 示Ano de 阳(正，板)极DC GP 常用单词CO MP ON ERT (零件)2. PR OC ESS Resi stor( res)电阻pre-form ing 加工VR( vari able ) 可变电阻com pon ent Chip resis tor`芯片电阻proc ess Cap acito r(ca p)电容inse rtionamic cap acito r 陶磁电容sold er mac hine Cho ke 线圈grav ity Indu ctor 电感tem pera ture Tran sfor mer( X’FNR ) 变压器touc h-up(T /U) Bob bin 线轴burn -in(B/e 保险丝asse Fus e hold er 保险丝座torq Fus e clip 保险丝座RTC 热敏电阻flux Vari stor 突波吸收器Diod e(di o)二极Phot o cou ple 光藕合二极管er 齐纳3. ELE CTR ICA Brid ge diod e 桥式整流Tran sisto r 电晶体inpu t(I/P IC 集成电路outp ut(O Filte r 滤波器regu FET 埸效电晶体spec ificatulati on 稳压器rippl PCB 电路板nois Cont rol boar d 小基板nois e buzz Fan 风扇prot Cas e 外壳OVP 过电压保Swit ch 开关OC P 过电流Soc ket 插座OPP 过功Scre w 螺丝no outp ut(N OP)无输Tap ping scre w 自动螺丝brok en/b low out (BR O) Nut 螺帽Was her 垫片opewas her 弹簧垫片volta Star was her 星形垫片curr ent Lock was her 接地星形垫片freq uen Out put wire 输出线load Out put cabl e 输出线full load Cabl e tie 束带lowor连接器dam Rive t 铆钉oscil losc ope 示Ter min al 端子Stan d-off 支柱adju Heat sink 散热片insp ectio n 检Insul ator 绝片hi-pot test 高e 胶带grou ndin gTub e 套管Lab el cauti on 标签(警告标签)Epo xy 脂Glue 胶Jum per wire 跳线Sold er bar。
电子类常用英文单词 电子厂常用英文
电子类常用英文單詞1.生產規格(Specification or Spec).1.1 BOM: Bill of material料表1.2 S/N: Spec notice生產注意事項1.3: ES : Electrical Spec電氣規格1.4: PK: Schematic電路圖1.5: PD: Physical dimension外觀尺寸圖Example:DPS-44APES:Input characterstics輸入特性1.1 Input voltage range 輸入電壓範圍1.2 Input frequency range輸入頻率範圍1.3 Max .input AC current最大輸入交流電流1.4 Inrush current(cold start)突增電流（冷開機）1.5 Efficency:60% Min.At nomall line效率:60%，一般電壓（指115/230V,除非另有說明）Noise test雜訊測試Static output characteristics靜態輸出特性Dynamic output characteristics動態輸出特性Rise time DC輸出電壓上升時間Hold up time DC輸出電壓持續時間Protection:保護OVP(over voltage protection)過電壓保護OPP(over power protection)過功率保護OCP(over current protection)過電流保護OTP(over temp protection)過溫度保護Short circuit protection短路保護Hi-pot(dielectric withstand voltage)耐電壓測試1.1 Primary to secondary 初級對次級 AC TO DC1.2 Primary to safety ground初級對地 AC TO FG1.3 Secondary to protection)次級對地 DC TO FG1.4 Insulation resistance絕緣阻抗1.5 Leakage current漏電流Electrical常用單詞regulation 調整voltage / current 電壓／電流ripple / noise / buzz 漣波／雜訊／異音frequency / load 頻率／負載no power (NOP） 無輸出full load / low load 重載／輕載broken / blow out (BRO 燒機damage / adjust 損壞／調整open / short 開路／短路oscilloscope 示波器SPEC(規格）常用單詞model: 機種revision: 版本issued date: 發行日期P/N: 品名，料號discrption: 說明remark: 備注reported by: 草擬cheched by: 審核approved by: 核 準2.FN(factory noice):工廠變更通知 / ECN(cngineering change notice)工程變更通知2.1 FN實施方式： Immediated change 立即變更 Running change 舊料用完用新料2.2 ECN: old rev.(舊版本）new rev.(新版本） drawing no / customer / alteration ref (圖號 / 客戶 / 變更依據)3.Department 部門3.1 MFG:manufacturing制造3.1.1 AI: auto insertion自動插件3.1.2 preforming加工3.1.3 SMD自動粘著3.2 QA: quality assurance品保3.2.1 VQA進料品質保證3.2.2 PQC ,FQC製程品管3.2.3 Calibration , safety儀校，安規3.3 PE:production engineering制造工程3.3.1 TE:test engineering測試工程3.3.2 ME:mechanical engineering機械工程3.3.3 IE: industrial engineering工業工程3.4 HR:human resources人力資源3.5 Material物料3.5.1 PC:production control生管3.5.2 purchasing采購3.5.3 warehouse倉庫3.6 ENG:engineering工程3.6.1 document資料中心4. Safety4.1 UL(Underwriters Laboratories)美國保險協會實驗室4.2 CSA(Canadian Standards Association)加拿大標準協會4.3 TUV德國技術監護協會4.4 VDE德國電氣標準4.5 NEMKO挪威電氣標準4.6 DEMKO丹麥電氣標準4.7 CCEE(China Commission for Conformity 中國電工產品認證委員會Certification of Electronial Equipment)4.8 CCIB(China Commodity Inspection Bureau)中國商品檢驗局5. Other 其他 FAX(傳真): date,to,fm,subject,dear,TKS,best regards,FAR: issue,description,corrective action,preventive action, analysis,defect,failure,supplier/vendorISO:Internation Organization for Standardization 國際標準化組織Quality Manual:品質手冊Procedure: 作業程序Quality policy: Quality Reliability Excellence品質至上信賴第一追求卓越Contraction(縮寫)6.Vocabulary:詞AQL: accept quality lecer 允收水準ATS: auto test system自動測試系統6.1 contraction 縮寫CR: critical嚴重6.2 component 零件ESD: electrostatic discharge靜電放電6.3 process 制程FET: field effective transistor場效電晶體6.4 electrical 電氣ICT: in-circuil test線路測試6.5 time 時間MA: major主要6.6 ver 動詞MI:minor次要6.7 non 名詞MRB: material reciew board不良材料審核組6.8 color 顏色NTC: negative temperatire characteristic熱敏電阻O/I: operation instruction工作指導書PWM: pulse width modification脈波寬調整S/N: series number序號PDPC: process,decision,program,chart SMD: surface mounting device表面沾著QCCA: quality control circle activities品管圈活動WIP:work in progress半成品(工作進行中) CWQC: company-wide quality control全面品管JIT: just in timeQCCA: quality control circle activities品管圈活動IR: infra-red 紅外線的CWQC: company-wide quality control全面品管ponent(零件)bobbin線軸shield背板bridge diode橋式整流triode三極管cable tie束帶tape 膠布capactitor(cap)電容screw tapping自攻螺絲case外殼screw machine機械螺絲ceramic capacitor陶瓷電容terminal端子chip capacitor晶片電容transformer(X'FMR)變壓器chip resistor晶片電阻transistor電晶體choke線圈tube套管connector連接器varistor突波吸收器control board基板VR(variable resistance)可變電阻diode二極體washer 墊片epoxy樹脂zener齊納fan風扇Process(製程)FET場效電晶體assembly組立filter濾波器burn-in(B/I)崩應fuse保險絲component零件fuse clip保險絲底座flux助焊劑fuse holder保險絲底座function test功能測試glue膠gravity比重heatsink散熱片Hi-pot test耐高壓測試IC集成電路insertion插件inductor電感ORT可靠度測試insulator絕緣片packing包裝jumper wire跳線solder machine錫爐label標簽station站別lock washer接地唾形墊片supplier/vendor廠商NTC熱敏電阻temperature溫度nut螺絲帽humidity濕度output cable輸出線torque扭距output wire輸出線touch-up(T/U)補焊(二次作業) PCB電路板Time(時間)photo couple光藕合二極體Jan.(Janury)一月regulator穩壓器Feb.(February)二月resistor電阻Mar.(March)三月ricer鉚釘Apr.(April)四月screw螺絲May五月socket插座Jun.(June)六月solder bar錫棒Jul.(July)七月sping washer彈簧墊片Aug.(August)八月stand-off支柱Sept.(September)九月star washer星形墊片Oct.(October)十月switch開關Nov.(November)十一月Dec.(December)十二月8.Time(時間)after 在……之後month月份before在……之前period期間date日期quarter季layout設計圖since從…..location位置week周manager經理method方法9.Ver(動詞)model機種change改變noise噪音check檢查operator作業員come來pallet棧板damage損傷paper紙張find發現plan設劃fix修理position位置go去problem問題happen發生procedure程序improve改善product產品insert插入production生產issue發行record記錄make 做,使remark備注pay付給report報告produce產生requirement要求provide提供sample樣品receive收到target目標replace代替technician技術員send發出trace(基板)線路take拿,采取waybill運貨單touch踫觸wind纏(盤,卷)繞,扭曲LED發光二極體tubber foot腳墊TEFLON鐵弗龍套管10.Non(名詞)11.Color(顏色)action動作,措施black黑色analysis分析blue藍色condition條件brown棕色data資料gold金色defect缺點gray灰色disposition處置green綠色engineer工程師orange橙色failure失敗red紅色file文件夾silver銀色inspector檢驗員violet(purple)紫色white白色yellow黃色。
电子工厂专业英语词汇
.、冲压、喷漆等专业词汇Assembly line 组装线 Layout 布置图Conveyer 流水线物料板 Rivet table 拉钉机 Rivet gun 拉钉枪 Screw driver 起子Electric screw driver 电动起子 Pn e u m a t i c s c r e w d r i v e r 气 worktable 工作桌 OOBA 开箱检查 fit together 组装在一起 fasten 锁紧(螺丝) fixture 夹具(治具) pallet 栈板 barcode 条形码barcode scanner 条形码扫描仪 fuse together 熔合 fuse machine 热熔机 repair 修理 operator 作业员 QC品管 supervisor 课长 ME制造工程师 MT制造生技 cosmetic inspect 外观检查 inner parts inspect 内部检查 thumb screw 大头螺丝 lbs.inch 镑、英寸 EMI gasket 导电条 front plate 前板 rear plate 后板 chassis |'∫æsi| 基座 bezel panel 面板 power button 电源按键 reset button 重置键Hi-pot test of SPS 高源高压测试 Voltage switch of SPS 电源电压接柆键 sheet metal parts 冲件 plastic parts 塑料件 SOP 制造作业程序material check list 物料检查表 work cell 工作间 trolley 台车 carton 纸箱 sub-line 支线 left fork 叉车Personnel resource department 人力资源部planning department 企划部 QC Section 品管科 stamping factory 冲压厂 painting factory 烤漆厂 molding factory 成型厂 punching machine 冲床 robot 机械手hydraulic machine 油压机 lathe 车床 planer |'plein |刨床 miller 铣床 grinder 磨床 driller 钻床linear cutting 线切割 electrical sparkle 电火花 welder 电焊机position 职务 president 董事长 general manager 总经理 factory director 厂长 department director 部长 deputy manager |'depjuti| =vice manager 副理 section supervisor 课长 deputy section supervisor =vicegroup leader/supervisor 组长 line supervisor 线长 assistant manager 助理 be put in storage 入库 pack packing 包装 to apply oil 擦油 to file burr 锉毛刺 final inspection 终检 to connect material 接料 to reverse material 翻料 wet station 沾湿台 Tiana 天那水 cleaning cloth 抹布 to load material 上料 to unload material 卸料 to return material/stock to 退料 scraped |'skr æpid|报废 scrape ..v.刮;削deficient purchase 来料不良 manufacture procedure 制程 deficient manufacturing procedure 制程不良oxidation |' ksi'dei n|氧化 scratch 刮伤 dents 压痕defective upsiding down 抽芽不良 defective to staking 铆合不良 embeded lump|in'bed| |l mp|镶块 feeding is not in place 送料不到位 stamping-missing 漏冲 production capacity 生产力 education and training 教育与训练 proposal improvement 提案改善. spare parts=buffer 备件 forklift 叉车trailer=long vehicle 拖板车 compound die 合模 die locker 锁模器pressure plate=plate pinch 压板 bolt 螺栓name of a department 部门名称 administration/general affairs dept 总务部automatic screwdriver 电动启子 thickness gauge 厚薄规 gauge(or jig)治具 power wire 电源线 buzzer 蜂鸣器defective product label 不良标签 identifying sheet list 标示单 screwdriver holder 起子插座 pedal 踩踏板 stopper 阻挡器 flow board 流水板hydraulic handjack 油压板车 forklift 叉车 pallet 栈板 glove(s)手套 gl o v e (s ) w i t h e x p othumb 大拇指 forefinger 食指 midfinger 中指 ring finger 无名指 little finger 小指 band-aid 创可贴industrial alcohol 工业酒精 alcohol container 沾湿台 head of screwdriver 起子头 sweeper 扫把 mop 拖把vacuum cleaner 吸尘器 rag 抹布 garbage container 灰箕 garbage can 垃圾箱 garbage bag 垃圾袋 chain 链条 jack 升降机production line 流水线 chain 链条槽 magnetizer 加磁器 lamp holder 灯架 to mop the floor 拖地 to clean the floor 扫地 to clean a table 擦桌子 air pipe 气管 packaging tool 打包机 packaging 打包 missing part 漏件 wrong part 错件excessive defects 过多的缺陷 critical defect 极严重缺陷 major defect 主要缺陷 minor defect 次要缺陷 not up to standard 不合规格 dimension/size is a little bigger 尺寸偏大(小)cosmetic defect 外观不良 slipped screwhead / slippery screw head 螺丝滑头slipped screwhead / shippery screw thread 滑手 speckle 斑点mildewed=moldy=mouldy 发霉 rust 生锈 deformation 变形 burr(金属)flash(塑件)毛边 poor staking 铆合不良 excessive gap 间隙过大 grease/oil stains 油污 inclusion 杂质 painting peel off 脏污shrinking/shrinkage 缩水 mixed color 杂色 scratch 划伤poor processing 制程不良 poor incoming part 事件不良 fold of packaging belt 打包带折皱 painting make-up 补漆 discoloration 羿色 water spots 水渍 po l i s h i n g /s u r f a c e p r o c e s s i n g 表 exposed metal/bare metal 金属裸露 lack of painting 烤漆不到位 safety 安全 quality 品质delivery deadline 交货期 cost 成本 engineering 工程 die repair 模修enterprise plan = enterprise expansion projects 企划 QC品管 die worker 模工production, to produce 生产 equipment 设备 to start a press 开机 stop/switch off a press 关机 classification 整理 regulation 整顿 cleanness 清扫 conservation 清洁 culture 教养qualified products, up-to-grade products 良品defective products, not up-to-grade products 不良品 waste 废料 board 广告牌 feeder 送料机 sliding rack 滑料架.defective product box 不良品箱 die change 换模 to fix a die 装模 to take apart a die 拆模 to repair a die 修模 packing material 包材 basket 蝴蝶竺 plastic basket 胶筐isolating plate baffle plate; barricade 隔板carton box 纸箱 to pull and stretch 拉深 to put material in place, to cut material, to input 落料 to impose lines 压线to compress, compressing 压缩 character die 字模 to feed, feeding 送料 transportation 运输(be)qualified, up to grade 合格 not up to grade, not qualified 不合格 material change, stock change 材料变更feature change 特性变更 evaluation 评估prepare for, make preparations for 准备parameters 参数rotating speed, revolution 转速 manufacture management 制造管理 abnormal handling 异常处理 production unit 生产单位 lots of production 生产批量 steel plate 钢板 roll material 卷料manufacture procedure 制程 operation procedure 作业流程 to revise, modify 修订 to switch over to, switch---to throw--over switching over 切换 en g i n e e r i n g , p r o j e c t d i f f i c u l t y 工 stage die 工程模 automation 自动化to stake, staking, riveting 铆合 add lubricating oil 加润滑油 shut die 架模shut height of a die 架模高度 analog-mode device 类模器 die lifter 举模器 argon welding 氩焊 Vocabulary for stamping 冲压常词汇 stamping, press 冲压punch press, dieing out press 冲床 uncoiler & strainghtener 整平机 feeder 送料机 rack, shelf, stack 料架 cylinder 油缸 robot 机械手 taker 取料机 conveyer belt 输送带 transmission rack 输送架 top stop 上死点 bottom stop 下死点 one stroke 一行程 inch 寸动to continue, cont.连动 to grip(material)吸料location lump, locating piece, block stop 定位块 reset 复位 smoothly 顺利 dent 压痕 scratch 刮伤 deformation 变形 filings 铁削 to draw holes 抽孔 inquiry, search for 查寻to stock, storage, in stock 库存 receive 领取approval examine and verify 审核 processing, to process 加工 delivery, to deliver 交货 To return/delivery to. to send de l i v e r y b a c k t o r e t u r n o g o o d registration 登记 registration card 登记卡 to control 管制to put forward and hand in 提报 safe stock 安全库存 acceptance = receive 验收 to notice 通知 ap p l i c a t i o n f o r mf o r p u r c h a s econsume, consumption 消耗 to fill in 填写 abrasion 磨损reverse angle = chamfer 倒角 character die 字模 to collect, to gather 收集 failure, trouble 故障 statistics 统计demand and supply 需求 career card 履历卡to take apart a die 卸下模具 to load a die 装上模具 to tight a bolt 拧紧螺栓 to looser a bolt 拧松螺栓 easily damaged parts 易损件 standard parts 标准件breaking.(be)broken,(be)cracked 断裂to lubricate 润滑 common vocabularyfordiedie 模具figure file, chart file 图档progressive die, follow (-on)die 连续模compound die复合模punched hole冲孔panel board镶块to bending折弯to pull, to stretch拉伸Line stretching, line pulling线拉伸engraving, to engrave刻印upsiding down edges翻边to stake铆合designing, to design设计design modification设计变化die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate, front board模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板spare dies模具备品spring 弹簧bolt螺栓document folder活页夹file folder资料夹to put file in order整理资料first count初盘人first check初盘复棹人second count 复盘人second check复盘复核人equipment设备waste materials废料casing = containerization装箱quantity of physical inventorysecond count 复盘点数量Quantity of customs count会计师盘,点数量the first page第一联filed by accounting department forreference会计部存查end-user/using unit(department)使用单位Summary of year-end physicalinventory bills年终盘点截止单据汇总表bill name单据名称This sheet and physical inventory listwill be sent to accountingdepartment together (Those of NHKwill be sent to financial department)本表请与盘点清册一起送会计部－(NHK厂区送财会部)Application status records ofyear-end physical inventory List andphysical inventory card 年终盘点Blank and waste sheet NO.空白与作废单号plate电镀mold成型material for engineering moldtesting工程试模材料not included in physical inventory不列入盘点sample样品incoming material to be inspected进货待验description品名steel/rolled steel钢材Material statistics sheet物料统计明细表meeting minutes会议记录meeting type 会别location地点chairman主席present members出席人员subject主题conclusion结论decision items决议事项approved by / checked by /prepared by核准/审核/承办PCE assembly production schedulesheetPCE组装厂生产排配表model机锺work order工令revision版次remark备注production control confirmation生产确认checked by初审approved by核准department部门Stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别..quality 品质 prepared by 制表 notes 说明Year-end physical inventory difference analysis sheet 年终盘点差异分析表 physical inventory 盘点数量difference quantity 差异量 cause analysis 原因分析 raw materials 原料 materials 物料 finished product 成品 semi-finished product 半成品 packing materials 包材 good product/accepted goods/ accepted parts/good parts 良品 defective product/non-good parts 不良品disposed goods 处理品 warehouse/hub 仓库 on way location 在途仓 oversea location 海外仓spare parts physical inventory list 备品盘点清单skid/pallet 栈板 tox machine 自铆机 wire EDM 线割 EDM 放电机 coil stock 卷料 sheet stock 片料 tolerance 工差 score=groove 压线 cam block 滑块 pilot 导正筒 trim 剪外边 pierce 剪内边 drag form 压锻差 slug hole 废料孔 feature die 公母模 expansion dwg 展开图 radius 半径 shim(wedge)楔子 torch-flame cut 火焰切割 set screw 止付螺丝form block 折刀 stop pin 定位销round pierce punch=die button 圆冲子shape punch=die insert 异形子 stock locater block 定位块 under cut=scrap chopper 清角 active plate 活动板 baffle plate 挡块 cover plate 盖板 male die 公模 female die 母模 groove punch 压线冲子 air-cushion eject-rod 气垫顶杆 spring-box eject-plate 弹簧箱顶板 bushing block 衬套 insert 入块 club car 高尔夫球车capability 能力 parameter 参数 factor 系数phosphate 皮膜化成 viscosity 涂料粘度 alkalidipping 脱脂 main manifold 主集流脉 bezel 斜视规 blanking 穿落模 dejecting 顶固模demagnetization 去磁;消磁 high-speed transmission 高速传递 heat dissipation 热传rack 上料 degrease 脱脂 rinse 水洗 alkaline etch 龄咬 desmut 剥黑膜 D.I. rinse 纯水次 Chromate 铬酸处理 Anodize 阳性处理 seal 封孔 revision 版次part number/P/N 料号 good products 良品 scraped products 报放心品 defective products 不良品 finished products 成品 disposed products 处理品 barcode 条形码 flow chart 流程窗体 assembly 组装 stamping 冲压 molding 成型spare parts=buffer 备品 coordinate 坐标 dismantle the die 折模 auxiliary function 辅助功能 poly-line 多义线 heater band 加热片 thermocouple 热电偶 sand blasting 喷沙 grit 砂砾derusting machine 除锈机 degate 打浇口 dryer 烘干机 induction 感应 induction light 感应光 r e s p o n s eram连杆 edge finder 巡边器 concave 凸convex凹short射料不足nick缺口speck瑕疪shine亮班splay 银纹gas mark焦痕delamination起鳞cold slug冷块blush 导色gouge沟槽;凿槽satin texture段面咬花witness line证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate钣金lathe车mill锉plane刨grind磨drill铝boring镗blister气泡fillet镶;嵌边through-hole form通孔形式roller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴angular offset角度偏差velocity速度torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机模具工程类plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号)shearing剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱dowel pin固定销coil spring弹簧lifter pin顶料销pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）..top block 上垫脚 punch set 上模座 punch pad 上垫板 punch holder 上夹板 stripper pad 脱料背板 up stripper 上脱料板 male die 公模(凸模) feature die 公母模 female die 母模(凹模) upper plate 上模板 lower plate 下模板 die pad 下垫板 die holder 下夹板 die set 下模座 bottom block 下垫脚 bottom plate 下托板(底板) stripping plate 内外打(脱料板) outer stripper 外脱料板 inner stripper 内脱料板 lower stripper 下脱料板 零件类 punch 冲头 insert 入块(嵌入件)deburring punch 压毛边冲子 groove punch 压线冲子 stamped punch 字模冲子 round punch 圆冲子special shape punch 异形冲子 bending block 折刀 roller 滚轴 baffle plate 挡块 located block 定位块 supporting block for location 定位支承块air cushion plate 气垫板 air-cushion eject-rod 气垫顶杆 trimming punch 切边冲子 stiffening rib punch = stinger 加强筋冲子 ribbon punch 压筋冲子guide plate 定位板 sliding block 滑块 active plate 活动板 lower sliding plate 下滑块板 upper holder block 上压块 upper mid plate 上中间板 spring box 弹簧箱 bushing block 衬套 cover plate 盖板 guide pad 导料块 塑件&模具相关英文compre sion molding 压缩成型 flash mold 溢流式模具 split mold 分割式模具 cavity 型控 母模 core 模心 公模 taper 锥拔leather cloak 仿皮革 shiver 饰纹 flow mark 流痕 welding mark 溶合痕self tapping screw 自攻螺丝 striper plate 脱料板 piston 活塞 cylinder 汽缸套 chip 细碎物handle mold 手持式模具 移转成型用模具 en c a p s u l射出成型用模具two plate 两极式（模具） well type 蓄料井 insulated runner 绝缘浇道方式 hot runner 热浇道 runner plat 浇道模块 valve gate 阀门浇口 band heater 环带状的电热器 spindle 阀针 spear head 刨尖头 slag well 冷料井 cold slag 冷料渣 air vent 排气道 h=0.02~0.05mm w=3.2mm L=3~5mm welding line 熔合痕 eject pin 顶出针 knock pin 顶出销 return pin 回位销反顶针 sleeve 套筒stripper plate 脱料板 insert core 放置入子guide pin 导销subzero 深冷处理 three plate 三极式模具 runner system 浇道系统 stress crack 应力电裂 orientation 定向sprue gate 射料浇口，直浇口 nozzle 射嘴sprue lock pin 料头钩销(拉料杆) slag well 冷料井 side gate 侧浇口 edge gate 侧缘浇口 tab gate 搭接浇口 film gate 薄膜浇口 flash gate 闸门浇口 slit gate 缝隙浇口 fan gate 扇形浇口dish gate因盘形浇口H=F=1/2t~1/5tT=2.5~3.5mm diaphragm gate隔膜浇口ring gate环形浇口submarine gate潜入式浇口tunnel gate隧道式浇口pin gate针点浇口Φ0.8~1.0mmRunner less无浇道(sprue less)无射料管方式long nozzle延长喷嘴方式sprue浇口;溶渣质量人员名称类QC quality control 品质管理人员FQC final quality control 终点质量管理人员IPQC in process quality control 制程中的质量管理人员OQC output quality control 最终出货质量管理人员IQC incoming quality control 进料质量管理人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 质量工程人员质量保证类FAI first article inspection 新品首件检查FAA first article assurance 首件确认TVR tool verification report 模具确认报告3B 3B 模具正式投产前确认CP capability index 能力指数CPK capability index of process 模具制程能力参数SSQA standardized supplier quality 合格供货商质量评估OOBA out of box audit 开箱检查QFD quality function deployment 质量机能展开FMEA failure model effectiveness analysis 失效模式分析8D 8 disciplines 8项回复内容FA final audit 最后一次稽核CAR corrective action request 改正行动要求corrective action report 改正行动报告FQC运作类AQL Acceptable Quality Level 运作类允收质量水平S/S Sample size 抽样检验样本大小ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的.AOQ Average Output Quality 平均出厂质量AOQL Average Output Quality Level 平均出厂质量Q/R/S Quality/Reliability/Service 质量/可靠度服务MIL-STD Military-Standard 军用标准S I-S IV Special I-Special IV 特殊抽样水平等级P/N Part Number 料号L/N Lot Number 特采AOD Accept On Deviation 特采UAI Use As It 首件检查报告FPIR First Piece Inspection Report 百万分之一PPM Percent Per Million 批号制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计质量管理R Range 全距AR Average Range 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限MAX Maximum 最大值MIN Minimum 最小值GRR Gauge Reproducibility & Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸DIA Diameter 直径FREQ Frequency 频率N Number 样品数其它质量术语类QCC Quality Control Circle 品质圈QIT Quality Improvement Team 质量改善小组PDCA Plan Do Check Action 计划执行检查总结ZD Zero Defect 零缺点QI Quality Improvement 质量改善QP Quality Policy 目标方针TQM Total Quality Management 全面质量管理MRB Material Reject Bill 退货单LQL Limiting Quality Level 最低质量水平RMA Return Material Audit 退料认可QAN Quality Ameliorate Notice 质量改善活动ADM Absolute Dimension Measurement 全尺寸测量QT Quality Target 质量目标.7QCTools 7 Quality Control Tools 品管七大手法通用之件类ECN Engineering Change Notes 工程变更通知(供货商)ECO Engineering Change Order 工程改动要求(客户)PCN Process Change Notice 工序改动通知PMP Product Management Plan 生产管制计划SIP Specification In Process 制程检验规格SOP Standard Operation Procedure 制造作业规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面系统文件类QC Quality System 质量系统ES Engineering Standardization 工程标准CGOO China General PCE龙华厂文件H Huston (美国)休斯敦C Compaq (美国)康伯公司C China 中国大陆A Assembly 组装(厂)S Stamping 冲压(厂)P Painting 烤漆(厂)I Intel 英特尔公司T TAIWAN 台湾IWS International Workman Standard 工艺标准ISO International Standard Organization 国际标准化组织GS General Specification 一般规格CMCS C-China M-Manufact C-Compaq S-Stamping Compaq产品在龙华冲压厂制造作业规范CQCA Q-Quality A-Assembly Compaq产品在龙华组装厂品管作业规范CQCP P-Painting Compaq产品在龙华烤漆厂品管作业规范部类PMC Production & Material Control 生产和物料控制PPC Production Plan Control 生产计划控制MC Material Control 物料控制ME Manufacture Engineering 制造工程部PE Project Engineering 产品工程部A/C Accountant Dept 会计部P/A Personal & Administration 人事行政部.DC Document Center 资料中心QE Quality Engineering 质量工程(部) QA Quality Assurance 质量保证(处) QC Quality Control 质量管理(课) PD Product Department 生产部LAB Library 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部P Painting 烤漆(厂)A Assembly 组装(厂)S Stamping 冲压(厂)生产类PCS Pieces 个(根,块等) PRS Pairs 双(对等)CTN Carton 卡通箱PAL Pallet/skid 栈板PO Purchasing Order 采购订单MO Manufacture Order 生产单D/C Date Code 生产日期码ID/C Identification Code (供货商)识别码SWR Special Work Request 特殊工作需求L/N Lot Number 批号P/N Part Number 料号其它OEM Original Equipment Manufacture 原设备制造PCE Personal Computer Enclosure 个人计算机外设PC Personal Computer 个人计算机CPU Central Processing Unit 中央处理器SECC SECC` 电解片SGCC SGCC 热浸镀锌材料NHK North of Hongkong 中国大陆PRC People's Republic of China 中国大陆U.S.A the United States of America 美国A.S.A.P As Soon As Possible 尽可能快的E-MAIL Electrical-Mail 电子邮件N/A Not Applicable 不适用QTY Quantity 数量VS 以及REV Revision 版本.JIT Just In Time 零库存I/O Input/Output 输入/输出OK Ok 好NG Not Good 不行,不合格C=0 Critical=0 极严重不允许ESD Electry-static Discharge 静电排放5S 希腊语整理,整顿,清扫,清洁,教养ATIN Attention 知会CC Carbon Copy 副本复印相关人员APP Approve 核准,认可,承认CHK Check 确认AM Ante Meridian 上午PM Post Meridian 下午CD Compact Disk 光盘CD-ROM Compact Disk Read-Only Memory 只读光盘FDD Floppy Disk Drive 软盘机HDD Hard Disk Drive 碟碟机REF Reference 仅供参考CONN Connector 连接器CAV Cavity 模穴CAD Computer Aid Design 计算器辅助设计ASS'Y Assembly 装配,组装MAT'S Material 材料IC Integrated Circuit 集成电路T/P True Position 真位度TYP Type 类型WDR Weekly Delivery Requirement 周出货需求C?T Cycle Time 制程周期L/T Lead Time 前置时间(生产前准备时间)S/T Standard Time 标准时间P/M Product Market 产品市场3C Computer,Commumcation,Consumer electronic's 消费性电子5WIH When,Where,Who,What,Why,How to5M Man,Machine,Material,Method,Measurement4MIH Man,Materia,Money,Method,Time 人力,物力,财务,技术,时间(资源) SQA Strategy Quality Assurance 策略质量保证DQA Design Quality Assurance 设计质量保证MQA Manufacture Quality Assurance 制造质量保证SSQA Sales and service Quality Assurance 销售及服务质量保证.LRR Lot Reject Rate 批退率BS Brain storming 脑力激荡EMI Electronic Magnet Inspect 高磁测试FMI Frequency Modulated Inspect 高频测试B/M Boar/Molding (flat cable)C/P Connector of PCA/P AssemblySPS Switching power supply 电源箱DT Desk Top 卧式(机箱)MT Mini-Tower 立式(机箱)DVD Digital Video DiskVCD Video Compact DiskLCD Liquid Crystal DisplayCAD Computer AID DesignCAM Computer AID ManufacturingCAE Computer AID EngineeringABIOS Advanced Basic in put/output system 先进的基本输入/输出系统CMOS Complementary Metal-Oxide-Semiconductor Transistor 互补金属氧化物半导体PDA Personal Digital Assistant 个人数字助理IC Integrated Circuit 集成电路ISA Industry Standard Architecture 工业标准体制结构MCA Micro Channel Architecture 微信道结构EISA Extended Industry Standard Architecture 扩充的工业标准结构SIMM Single in-line memory module 单项导通汇流组件DIMM Dual in-line Memory Module 双项导通汇流组件LED Light-Emitting Diode 发光二级管FMEA Failure Mode Effectiveness 失效模式分析W/H Wire Harness 金属线绪束集组件F/C Flat Cable 排线PCB Printed Circuit Board 印刷电路板CAR Correction Action Report 改善报告NG Not Good 不良WPR Weekly Delivery Requirement 周出货要求PPM Parts Per Million 百万分之一TPM Total Production Maintenance 全面生产保养MRP Material Requirement Planning 物料需计划OS Operation System 操作系统TBA To Be Design 待定,定缺D/C Drawing Change.P/P Plans & ProcedureEMI Electrical-Music Industry 电子音乐工业RFI Read Frequency Input 读频输入MMC Maximum Material ConditionMMS Maximum Material SizeLMC Least Material ConditionLMS Least Material Size.。
电子工厂专业英语词汇
、冲压、喷漆等专业词汇Assembly line 组装线 Layout 布置图Conveyer 流水线物料板 Rivet table 拉钉机 Rivet gun 拉钉枪 Screw driver 起子Electric screw driver 电动起子 Pn e u m a t i c s c r e w d r i v e r 气 worktable 工作桌 OOBA 开箱检查fit together 组装在一起 fasten 锁紧(螺丝) fixture 夹具(治具) pallet 栈板 barcode 条形码barcode scanner 条形码扫描仪 fuse together 熔合 fuse machine 热熔机 repair 修理 operator 作业员 QC品管 supervisor 课长 ME制造工程师 MT制造生技 cosmetic inspect 外观检查 inner parts inspect 内部检查 thumb screw 大头螺丝 镑、英寸EMI gasket 导电条 front plate 前板 rear plate 后板 chassis |'∫?si| 基座 bezel panel 面板 power button 电源按键 reset button 重置键Hi-pot test of SPS 高源高压测试 Voltage switch of SPS 电源电压接柆键sheet metal parts 冲件 plastic parts 塑料件SOP 制造作业程序material check list 物料检查表 work cell 工作间 trolley 台车 carton 纸箱 sub-line 支线 left fork 叉车Personnel resource department 人力资源部planning department 企划部 QC Section 品管科 stamping factory 冲压厂 painting factory 烤漆厂 molding factory 成型厂 punching machine 冲床 robot 机械手hydraulic machine 油压机 lathe 车床planer |'plein?|刨床 miller 铣床 grinder 磨床 driller 钻床linear cutting 线切割 electrical sparkle 电火花 welder 电焊机position 职务 president 董事长 general manager 总经理 factory director 厂长 department director 部长 deputy manager |'depjuti| =vice manager 副理section supervisor 课长deputy section supervisor =vice group leader/supervisor 组长 line supervisor 线长 assistant manager 助理be put in storage 入库 pack packing 包装 to apply oil 擦油 to file burr 锉毛刺 final inspection 终检 to connect material 接料 to reverse material 翻料 wet station 沾湿台 Tiana 天那水 cleaning cloth 抹布 to load material 上料 to unload material 卸料to return material/stock to 退料 scraped |'skr?pid|报废 scrape ..v.刮;削deficient purchase 来料不良 manufacture procedure 制程 deficient manufacturing procedure 制程不良oxidation |' ksi'dei?n|氧化 scratch 刮伤 dents 压痕defective upsiding down 抽芽不良 defective to staking 铆合不良 embeded lump|in'bed| |l?mp|镶块 feeding is not in place 送料不到位 stamping-missing 漏冲 production capacity 生产力 education and training 教育与训练 proposal improvement 提案改善 spare parts=buffer 备件 forklift 叉车trailer=long vehicle 拖板车 compound die 合模 die locker 锁模器pressure plate=plate pinch 压板bolt 螺栓name of a department 部门名称 administration/general affairs dept 总务部automatic screwdriver 电动启子 thickness gauge 厚薄规 gauge(or jig)治具 power wire 电源线 buzzer 蜂鸣器defective product label 不良标签 identifying sheet list 标示单 screwdriver holder 起子插座 pedal 踩踏板 stopper 阻挡器 flow board 流水板hydraulic handjack 油压板车 forklift 叉车 pallet 栈板 glove(s)手套 gl o v e (s ) w i t h e x p o s e d f i nthumb 大拇指 forefinger 食指 midfinger 中指 ring finger 无名指 little finger 小指 band-aid 创可贴industrial alcohol 工业酒精 alcohol container 沾湿台 head of screwdriver 起子头 sweeper 扫把 mop拖把 vacuum cleaner 吸尘器 rag 抹布garbage container 灰箕 garbage can 垃圾箱 garbage bag 垃圾袋 chain 链条 jack 升降机production line 流水线 chain 链条槽 magnetizer 加磁器 lamp holder 灯架 to mop the floor 拖地 to clean the floor 扫地 to clean a table 擦桌子 air pipe 气管 packaging tool 打包机 packaging 打包 missing part 漏件 wrong part 错件excessive defects 过多的缺陷 critical defect 极严重缺陷 major defect 主要缺陷 minor defect 次要缺陷 not up to standard 不合规格 dimension/size is a little bigger 尺寸偏大(小)cosmetic defect 外观不良 slipped screwhead / slippery screw head 螺丝滑头slipped screwhead / shippery screw thread 滑手 speckle 斑点mildewed=moldy=mouldy 发霉 rust 生锈 deformation 变形burr(金属)flash(塑件)毛边 poor staking 铆合不良 excessive gap 间隙过大 grease/oil stains 油污 inclusion 杂质painting peel off 脏污 shrinking/shrinkage 缩水 mixed color 杂色 scratch 划伤poor processing 制程不良 poor incoming part 事件不良 fold of packaging belt 打包带折皱 painting make-up 补漆 discoloration 羿色 water spots 水渍 po l i sexposed metal/bare metal 金属裸露 lack of painting 烤漆不到位 safety 安全 quality 品质delivery deadline 交货期 cost 成本 engineering 工程 die repair 模修enterprise plan = enterprise expansion projects 企划 QC 品管die worker 模工production, to produce 生产 equipment 设备 to start a press 开机 stop/switch off a press 关机 classification 整理 regulation 整顿 cleanness 清扫 conservation 清洁 culture 教养qualified products, up-to-grade products 良品defective products, not up-to-grade products 不良品 waste 废料 board 广告牌 feeder 送料机 sliding rack 滑料架defective product box 不良品箱 die change 换模 to fix a die 装模 to take apart a die 拆模 to repair a die 修模 packing material 包材 basket 蝴蝶竺 plastic basket 胶筐isolating plate baffle plate; barricade 隔板 carton box 纸箱to pull and stretch 拉深to put material in place, to cut material, to input 落料 to impose lines 压线to compress, compressing 压缩 character die 字模 to feed, feeding 送料 transportation 运输(be)qualified, up to grade 合格 not up to grade, not qualified 不合格material change, stock change 材料变更feature change 特性变更 evaluation 评估prepare for, make preparations for 准备 parameters 参数rotating speed, revolution 转速 manufacture management 制造管理 abnormal handling 异常处理 production unit 生产单位 lots of production 生产批量 steel plate 钢板 roll material 卷料manufacture procedure 制程 operation procedure 作业流程 to revise, modify 修订to switch over to, switch---to throw--over switching over 切换 en g i n e e r i n g , p r o j estage die 工程模 automation 自动化to stake, staking, riveting 铆合 add lubricating oil 加润滑油 shut die 架模shut height of a die 架模高度 analog-mode device 类模器 die lifter 举模器 argon welding 氩焊 Vocabulary for stamping 冲压常词汇stamping, press 冲压punch press, dieing out press 冲床 uncoiler & strainghtener 整平机 feeder 送料机 rack, shelf, stack 料架 cylinder 油缸 robot 机械手 taker 取料机conveyer belt 输送带 transmission rack 输送架 top stop 上死点 bottom stop 下死点 one stroke 一行程 inch 寸动to continue, cont.连动 to grip(material)吸料location lump, locating piece, block stop 定位块 reset 复位 smoothly 顺利 dent 压痕 scratch 刮伤 deformation 变形 filings 铁削 to draw holes 抽孔 inquiry, search for 查寻to stock, storage, in stock 库存 receive 领取approval examine and verify 审核 processing, to process 加工 delivery, to deliver 交货 To return/delivery to. to send de l i v e r y b a c k t o registration 登记 registration card 登记卡 to control 管制to put forward and hand in 提报 safe stock 安全库存 acceptance = receive 验收 to notice 通知 ap p l i c a tconsume, consumption 消耗 to fill in 填写 abrasion 磨损reverse angle = chamfer 倒角 character die 字模 to collect, to gather 收集 failure, trouble 故障 statistics 统计 demand and supply 需求 career card 履历卡to take apart a die 卸下模具 to load a die 装上模具 to tight a bolt 拧紧螺栓 to looser a bolt 拧松螺栓easily damaged parts 易损件 standard parts 标准件breaking.(be)broken,(be)cracked 断裂to lubricate 润滑 commonvocabularyfordieengineering 模具工程常用词汇 die 模具figure file, chart file 图档 cu t t i n gd ie , b l a n k i n g d i eprogressive die, follow (-on)die 连续模compound die 复合模 punched hole 冲孔 panel board 镶块 to bending 折弯to pull, to stretch 拉伸 Line stretching, line pulling 线拉伸engraving, to engrave 刻印 upsiding down edges 翻边 to stake 铆合designing, to design 设计 design modification 设计变化 die block 模块 folded block 折弯块 sliding block 滑块 location pin 定位销 lifting pin 顶料销die plate, front board 模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板spare dies模具备品spring 弹簧bolt螺栓document folder活页夹file folder资料夹to put file in order整理资料first count初盘人first check初盘复棹人second count 复盘人second check复盘复核人equipment设备waste materials废料casing = containerization装箱quantity of physical inventory second count 复盘点数量Quantity of customs count会计师盘,点数量the first page第一联filed by accounting department for reference会计部存查end-user/using unit(department)使用单位Summary of year-end physical inventory bills年终盘点截止单据汇总表bill name单据名称This sheet and physical inventory list will be sent to accounting department together (Those of NHK will be sent to financial department)本表请与盘点清册一起送会计部－(NHK厂区送财会部)Application status records of year-end physical inventory Listand physical inventory card 年Blank and waste sheet NO.空白与作废单号plate电镀mold成型material for engineering moldtesting工程试模材料not included in physicalinventory不列入盘点sample样品incoming material to be inspected进货待验description品名steel/rolled steel钢材Material statistics sheet物料统计明细表meeting minutes会议记录meeting type 会别location地点chairman主席present members出席人员subject主题conclusion结论decision items决议事项approved by / checked by /prepared by核准/审核/承办PCE assembly production schedulesheetPCE组装厂生产排配表model机锺work order工令revision版次remark备注production control confirmation生产确认checked by初审approved by核准department部门Stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别quality品质prepared by制表notes说明Year-end physical inventorydifference analysis sheet年终盘点差异分析表physical inventory盘点数量difference quantity差异量cause analysis原因分析raw materials原料materials物料finished product成品semi-finished product半成品packing materials包材good product/accepted goods/accepted parts/good parts良品defective product/non-good parts不良品disposed goods处理品warehouse/hub仓库on way location在途仓oversea location海外仓spare parts physical inventorylist备品盘点清单skid/pallet栈板tox machine自铆机wire EDM线割EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)楔子torch-flame cut火焰切割set screw止付螺丝form block折刀stop pin定位销round pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject-rod气垫顶杆spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块club car高尔夫球车capability能力parameter参数factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂main manifold主集流脉bezel斜视规blanking穿落模dejecting顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传rack上料degrease脱脂rinse水洗alkaline etch龄咬desmut剥黑膜. rinse纯水次Chromate铬酸处理Anodize阳性处理seal封孔revision版次part number/P/N料号good products良品scraped products报放心品defective products不良品finished products成品disposed products处理品barcode条形码flow chart流程窗体assembly组装stamping冲压molding成型spare parts=buffer备品coordinate坐标dismantle the die折模auxiliary function辅助功能poly-line多义线heater band 加热片thermocouple热电偶sand blasting喷沙grit 砂砾derusting machine除锈机degate打浇口dryer烘干机induction感应induction light感应光response=reaction=interactioram连杆edge finder巡边器concave凸convex凹short射料不足nick缺口speck瑕疪shine亮班splay 银纹gas mark焦痕delamination起鳞cold slug冷块blush 导色gouge沟槽;凿槽satin texture段面咬花witness line证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate钣金lathe车mill锉plane刨grind磨drill铝boring镗blister气泡fillet镶;嵌边through-hole form通孔形式roller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴angular offset角度偏差velocity速度torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机模具工程类plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号)shearing剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱dowel pin固定销coil spring弹簧lifter pin顶料销pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板)stripping plate内外打(脱料板)outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板零件类punch冲头insert入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶杆trimming punch切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch压筋冲子guide plate定位板sliding block滑块active plate活动板lower sliding plate下滑块板upper holder block上压块upper mid plate上中间板spring box弹簧箱bushing block衬套cover plate盖板guide pad导料块塑件&模具相关英文compre sion molding压缩成型flash mold溢流式模具split mold分割式模具cavity型控母模core模心公模taper锥拔leather cloak仿皮革shiver饰纹flow mark流痕welding mark溶合痕self tapping screw自攻螺丝striper plate脱料板piston活塞cylinder汽缸套chip细碎物handle mold手持式模具移转成型用模具射出成型用模具two plate两极式（模具）well type蓄料井insulated runner绝缘浇道方式hot runner热浇道runner plat浇道模块valve gate阀门浇口band heater环带状的电热器spindle阀针spear head刨尖头slag well冷料井cold slag冷料渣air vent排气道h=~0.05mmw=3.2mmL=3~5mmwelding line熔合痕eject pin顶出针knock pin顶出销return pin回位销反顶针sleeve套筒stripper plate脱料板insert core放置入子guide pin导销subzero深冷处理three plate三极式模具runner system浇道系统stress crack应力电裂orientation定向sprue gate射料浇口，直浇口nozzle射嘴sprue lock pin料头钩销(拉料杆)slag well冷料井side gate侧浇口edge gate侧缘浇口tab gate搭接浇口film gate薄膜浇口flash gate闸门浇口slit gate缝隙浇口fan gate扇形浇口dish gate因盘形浇口H=F=1/2t~1/5tT=~3.5mmdiaphragm gate隔膜浇口ring gate环形浇口submarine gate潜入式浇口tunnel gate隧道式浇口pin gate针点浇口Φ~1.0mmRunner less无浇道(sprue less)无射料管方式long nozzle延长喷嘴方式sprue浇口;溶渣质量人员名称类QC quality control 品质管理人员FQC final quality control 终点质量管理人员IPQC in process quality control 制程中的质量管理人员OQC output quality control 最终出货质量管理人员IQC incoming quality control 进料质量管理人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 质量工程人员质量保证类FAI first article inspection 新品首件检查FAA first article assurance 首件确认TVR tool verification report 模具确认报告3B 3B 模具正式投产前确认CP capability index 能力指数CPK capability index of process 模具制程能力参数SSQA standardized supplier quality 合格供货商质量评估OOBA out of box audit 开箱检查QFD quality function deployment 质量机能展开FMEA failure model effectiveness analysis 失效模式分析8D 8 disciplines 8项回复内容FA final audit 最后一次稽核CAR corrective action request 改正行动要求corrective action report 改正行动报告FQC运作类AQL Acceptable Quality Level 运作类允收质量水平S/S Sample size 抽样检验样本大小ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的AOQ Average Output Quality 平均出厂质量AOQL Average Output Quality Level 平均出厂质量Q/R/S Quality/Reliability/Service 质量/可靠度服务MIL-STD Military-Standard 军用标准S I-S IV Special I-Special IV 特殊抽样水平等级P/N Part Number 料号L/N Lot Number 特采AOD Accept On Deviation 特采UAI Use As It 首件检查报告FPIR First Piece Inspection Report 百万分之一PPM Percent Per Million 批号制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计质量管理R Range 全距AR Average Range 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限MAX Maximum 最大值MIN Minimum 最小值GRR Gauge Reproducibility & Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸DIA Diameter 直径FREQ Frequency 频率N Number 样品数其它质量术语类QCC Quality Control Circle 品质圈QIT Quality Improvement Team 质量改善小组PDCA Plan Do Check Action 计划执行检查总结ZD Zero Defect 零缺点QI Quality Improvement 质量改善QP Quality Policy 目标方针TQM Total Quality Management 全面质量管理MRB Material Reject Bill 退货单LQL Limiting Quality Level 最低质量水平RMA Return Material Audit 退料认可QAN Quality Ameliorate Notice 质量改善活动ADM Absolute Dimension Measurement 全尺寸测量QT Quality Target 质量目标7QCTools 7 Quality Control Tools 品管七大手法通用之件类ECN Engineering Change Notes 工程变更通知(供货商)ECO Engineering Change Order 工程改动要求(客户)PCN Process Change Notice 工序改动通知PMP Product Management Plan 生产管制计划SIP Specification In Process 制程检验规格SOP Standard Operation Procedure 制造作业规范IS Inspection Specification 成品检验规范BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面系统文件类QC Quality System 质量系统ES Engineering Standardization 工程标准CGOO China General PCE龙华厂文件H Huston (美国)休斯敦C Compaq (美国)康伯公司C China 中国大陆A Assembly 组装(厂)S Stamping 冲压(厂)P Painting 烤漆(厂)I Intel 英特尔公司T TAIWAN 台湾IWS International Workman Standard 工艺标准ISO International Standard Organization 国际标准化组织GS General Specification 一般规格CMCS C-China M-Manufact C-Compaq S-Stamping Compaq产品在龙华冲压厂制造作业规范CQCA Q-Quality A-Assembly Compaq产品在龙华组装厂品管作业规范CQCP P-Painting Compaq产品在龙华烤漆厂品管作业规范部类PMC Production & Material Control 生产和物料控制PPC Production Plan Control 生产计划控制MC Material Control 物料控制ME Manufacture Engineering 制造工程部PE Project Engineering 产品工程部A/C Accountant Dept 会计部P/A Personal & Administration 人事行政部DC Document Center 资料中心QE Quality Engineering 质量工程(部)QA Quality Assurance 质量保证(处)QC Quality Control 质量管理(课)PD Product Department 生产部LAB Library 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部P Painting 烤漆(厂)A Assembly 组装(厂)S Stamping 冲压(厂)生产类PCS Pieces 个(根,块等)PRS Pairs 双(对等)CTN Carton 卡通箱PAL Pallet/skid 栈板PO Purchasing Order 采购订单MO Manufacture Order 生产单D/C Date Code 生产日期码ID/C Identification Code (供货商)识别码SWR Special Work Request 特殊工作需求L/N Lot Number 批号P/N Part Number 料号其它OEM Original Equipment Manufacture 原设备制造PCE Personal Computer Enclosure 个人计算机外设PC Personal Computer 个人计算机CPU Central Processing Unit 中央处理器SECC SECC` 电解片SGCC SGCC 热浸镀锌材料NHK North of Hongkong 中国大陆PRC People's Republic of China 中国大陆the United States of America 美国As Soon As Possible 尽可能快的E-MAIL Electrical-Mail 电子邮件N/A Not Applicable 不适用QTY Quantity 数量VS 以及REV Revision 版本JIT Just In Time 零库存I/O Input/Output 输入/输出OK Ok 好NG Not Good 不行,不合格C=0 Critical=0 极严重不允许ESD Electry-static Discharge 静电排放5S 希腊语整理,整顿,清扫,清洁,教养ATIN Attention 知会CC Carbon Copy 副本复印相关人员APP Approve 核准,认可,承认CHK Check 确认AM Ante Meridian 上午PM Post Meridian 下午CD Compact Disk 光盘CD-ROM Compact Disk Read-Only Memory 只读光盘FDD Floppy Disk Drive 软盘机HDD Hard Disk Drive 碟碟机REF Reference 仅供参考CONN Connector 连接器CAV Cavity 模穴CAD Computer Aid Design 计算器辅助设计ASS'Y Assembly 装配,组装MAT'S Material 材料IC Integrated Circuit 集成电路T/P True Position 真位度TYP Type 类型WDR Weekly Delivery Requirement 周出货需求CT Cycle Time 制程周期L/T Lead Time 前置时间(生产前准备时间)S/T Standard Time 标准时间P/M Product Market 产品市场3C Computer,Commumcation,Consumer electronic's 消费性电子5WIH When,Where,Who,What,Why,How to5M Man,Machine,Material,Method,Measurement4MIH Man,Materia,Money,Method,Time 人力,物力,财务,技术,时间(资源) SQA Strategy Quality Assurance 策略质量保证DQA Design Quality Assurance 设计质量保证MQA Manufacture Quality Assurance 制造质量保证SSQA Sales and service Quality Assurance 销售及服务质量保证LRR Lot Reject Rate 批退率BS Brain storming 脑力激荡EMI Electronic Magnet Inspect 高磁测试FMI Frequency Modulated Inspect 高频测试B/M Boar/Molding (flat cable)C/P Connector of PCA/P AssemblySPS Switching power supply 电源箱DT Desk Top 卧式(机箱)MT Mini-Tower 立式(机箱)DVD Digital Video DiskVCD Video Compact DiskLCD Liquid Crystal DisplayCAD Computer AID DesignCAM Computer AID ManufacturingCAE Computer AID EngineeringABIOS Advanced Basic in put/output system 先进的基本输入/输出系统CMOS Complementary Metal-Oxide-Semiconductor Transistor 互补金属氧化物半导体PDA Personal Digital Assistant 个人数字助理IC Integrated Circuit 集成电路ISA Industry Standard Architecture 工业标准体制结构MCA Micro Channel Architecture 微信道结构EISA Extended Industry Standard Architecture 扩充的工业标准结构SIMM Single in-line memory module 单项导通汇流组件DIMM Dual in-line Memory Module 双项导通汇流组件LED Light-Emitting Diode 发光二级管FMEA Failure Mode Effectiveness 失效模式分析W/H Wire Harness 金属线绪束集组件F/C Flat Cable 排线PCB Printed Circuit Board 印刷电路板CAR Correction Action Report 改善报告NG Not Good 不良WPR Weekly Delivery Requirement 周出货要求PPM Parts Per Million 百万分之一TPM Total Production Maintenance 全面生产保养MRP Material Requirement Planning 物料需计划OS Operation System 操作系统TBA To Be Design 待定,定缺D/C Drawing ChangeP/P Plans & ProcedureEMI Electrical-Music Industry 电子音乐工业RFI Read Frequency Input 读频输入MMC Maximum Material ConditionMMS Maximum Material SizeLMC Least Material ConditionLMS Least Material Size。
电子厂常用英语
Plskindlyreviewit请尽快回复TKS:：谢start：开始时间End结束时间Target预计结束时间cut off截止时间update更新below is Failure summary以下是不良明细QAquality assurance质量保证IQA：Imcomingqualityassurance进料品质保证进料检验PQA：process quality assurance制程品质保证CQA：customerqualityassurance客户品质保证质检RQA：Recallqualityassurance回收物料品质保证OQA：outputqualityassurance出货品质保证SQA：supplier quality assurance软件质量保证LQA：laboratory quality assurance检验品质保证MQA：manufactune quality assurance制造品质保证VQA进料品质保证QC：quality control品质管控IPQC：in process quality control制程品质管控巡检OQC：out going quality control出货品质管控出货检验RQC：Recall quality control物料回收品质管控FQC：Finallqualitycontrol最终品质管控最终检验TQC：Total quality control全面质量管控TQM：Tontal quality control全面品质管理IQC：Imcomingqualitycontrol进料品质管控SQC：Statisticalqualitycontrol统计品质管控PQC：passage quality control段检品质管控QE：quality engineering质量工程SQE：Supplier quality engineering供应商品质工程师VQE：Verdor quality engineeringJQE：Joint quality engineering协力品质工程师PQE：processqualityengineering制程品质工程师PEproduction engineering制造工程TEtestengineering测试工程MEmechanical engineering机械工程IEindustrialengineering工业工程DE: Desense 拆机测试品质指数：quality index品质目标：quality target品质方针：qualitypolicy品质要求：quality requirement品质改善：qualityimprovement品质保证：qualityAssurance品质管控：quality control品质检验：quality inspcton品质管理：qualitymanagerHRhuman resoures人力资源PCproduction control生管DCCdocument control资料中心PD：product Department生产部制造部：production departmentquality control Department品质部工程部engineering departmentPM：project management专案管理MM：Material management物料管理MC：Material control物控BOMBill Of Material物料清单MLB：Main Logistic Board主板PCB板：printed circuit boardP/Npart munber料号SMT：surface mounting technology表面贴装技术S/Nseries number序列号sop:standardoperationprocedure标准作业指导书Wi：working instruction作业指导书SIP：standard instruction procedure标准检验规范O/Ioperation instuction工作指导书ECN（engineering change notice）工程变更通知FAIfirst article inspection新品首件检查FAAfirst article assurance首件确认OBA：openboxaubit开箱检验outofboxauditPCS：数量ISO：Internationalorganizationforstandardization国际标准化组织通风系统：Ventication system车间环境：working place environment车间：workshop工艺流程图：process flow diagramoperation procedure作业流程生产流程：production flowshut down关机copy复制保存：replace异常机：Abnormal UinitCTR：异常机BTR：正常机脏污：Dirtydeformation变形刮伤：surfacefinished product成品semi-finished product半成品goodproduct/acceptedgoods/acceptedparts/good parts良品defective product/non-good parts不良品WIP work in progress半成品cause analysis原因分析cosmetic inspect外检良率：yield不良率：Failure vate投入数：input quatity插入：plug in释放，流拉：release点击：click拔掉：unplug，remove弹出：display扫描：scan目检：inspect连接：connectmodel机种revision版本异常：abnormalities维修：repair生产人员：production personbel 测试人员：opratorsproduction team作业员线长：Line suppervisor领导：leader经理：manager总经理：general manager老板：boss科长课长主管：supervisor组长：team leader助理：assitand工程师：engineering副手：assitand adunct员工：personrel全技员：multi function厂长：director of a factory董事长：chairman, the board of directors总裁：president, director general customer客户purchasing采购warehouse仓库ENGengineering工程discription描述remark备注MA major主要的MIminor次要的supplier/vendor厂商material物料barcode条码board看板label标签Rivet table拉钉机power wire电源线capacitor电容case外壳washer垫片connector连接器fan风扇heatsink散热片Rivet gun拉钉枪Screw driver起子Electric screw driver风批Pneumatic screw driver电批desktop台式机fasten螺丝screwfixture夹具(治具)pallet栈板硬盘：HD，disk内存：memorry支架：bracket底盖：footbarcode scanner扫描枪IC集成电路电阻resistor开关switch噪音noise程序procedure检验员inspectortarget预计技术员technician抽检sample checkPO purchase order订单deficient purchase来料不良classification整理regulation整顿cleanness清扫conservation清洁三月march四月april五月may六月June七月JuneI will soon get used to the work我很快就会习惯这项工作的this company is our regular customer这家公司是我们的老顾客youbecamemoreandmorebeautiful你变的越来越漂亮了没问题No problemfunction test功能测试flux助焊剂fuse保险丝packing包装station工站temperature温度solder machine锡炉插座socket颜色单词红色red绿色green白色white黄色yellow黑色black蓝色blue棕色brown金色gold紫色purple（violet）银色silverJanuary一月february二月八月August九月september十月October十一月November十二月December11/ 11。
电子厂常用英语
插头
万用表 百分比
电镀，被覆金属 比率 近似地，大约 胶合板 物料審核會議 线圈 打电话进去 形状 压伤 极细的刮花 泡沫 丝网印刷 变形 相互的
warp 弯曲 apply glue 打胶水 lead protrude 略述 joint 接缝 直径 perforation 穿孔 环氧树脂 Jumper/leader 助拉 老化炉 stated 定期的，规定的 拆装 solder particle 锡珠、锡渣 顾问 In the absence of 当。。。不在时 刮花 molded internal contamination 铸塑污染、杂质 凹痕 crack 裂纹 接合线 gate blush 质地 , 纹理 solder glob 锡珠、锡渣 刮刀，刮板 toroid 磁环 异议 scar 伤痕 隔离 bobbin 胶芯
中文翻译 电容器 保险丝 包装 电阻 标签, 高压测试 稀释剂 经理,代理商 审批 牛的胶带
英语
switch diode ultrasonic connector audion alcohol wire director fixture/jib subordinate solder iron resultful lift up mandatory plywood leakage test misalignment clearance frame air hole flaw stress whitening plastic rib volume-produce hook up
胶水干
中文翻译 打火 夹具 插座 配套连接器 残留物 支点，固定器 光泽面 熔接 渣滓 助焊剂
英语
inventory guide pin summit mask slot tap proportion touch up deviation
电子工厂专业英语词汇
1、冲压、喷漆等专业词汇Assembly line 组装线 Layout 布置图Conveyer 流水线物料板 Rivet table 拉钉机 Rivet gun 拉钉枪 Screw driver 起子Electric screw driver 电动起子 Pn e u m a t i c s c r e w d r i v e r 气 worktable 工作桌 OOBA 开箱检查 fit together 组装在一起 fasten 锁紧(螺丝) fixture 夹具(治具) pallet 栈板 barcode 条形码barcode scanner 条形码扫描仪 fuse together 熔合 fuse machine 热熔机 repair 修理 operator 作业员 QC品管 supervisor 课长 ME制造工程师 MT制造生技 cosmetic inspect 外观检查 inner parts inspect 内部检查 thumb screw 大头螺丝 lbs.inch 镑、英寸 EMI gasket 导电条 front plate 前板 rear plate 后板 chassis |'∫æsi| 基座 bezel panel 面板 power button 电源按键 reset button 重置键Hi-pot test of SPS 高源高压测试 Voltage switch of SPS 电源电压接柆键 sheet metal parts 冲件 plastic parts 塑料件 SOP 制造作业程序material check list 物料检查表 work cell 工作间 trolley 台车 carton 纸箱 sub-line 支线 left fork 叉车Personnel resource department 人力资源部planning department 企划部 QC Section 品管科 stamping factory 冲压厂 painting factory 烤漆厂 molding factory 成型厂 punching machine 冲床 robot 机械手hydraulic machine 油压机 lathe 车床 planer |'plein |刨床 miller 铣床 grinder 磨床 driller 钻床linear cutting 线切割 electrical sparkle 电火花 welder 电焊机position 职务 president 董事长 general manager 总经理 factory director 厂长 department director 部长 deputy manager |'depjuti| =vice manager 副理section supervisor 课长deputy section supervisor =vicegroup leader/supervisor 组长 line supervisor 线长 assistant manager 助理 be put in storage 入库 pack packing 包装 to apply oil 擦油 to file burr 锉毛刺 final inspection 终检 to connect material 接料 to reverse material 翻料 wet station 沾湿台 Tiana 天那水 cleaning cloth 抹布 to load material 上料 to unload material 卸料 to return material/stock to 退料 scraped |'skræpid|报废 scrape ..v.刮;削deficient purchase 来料不良 manufacture procedure 制程 deficient manufacturing procedure 制程不良oxidation |' ksi'dei n|氧化 scratch 刮伤 dents 压痕defective upsiding down 抽芽不良 defective to staking 铆合不良 embeded lump|in'bed| |l mp|镶块 feeding is not in place 送料不到位 stamping-missing 漏冲 production capacity 生产力 education and training 教育与训练 proposal improvement 提案改善 spare parts=buffer 备件 forklift 叉车trailer=long vehicle 拖板车2compound die 合模 die locker 锁模器pressure plate=plate pinch 压板 bolt 螺栓name of a department 部门名称 administration/general affairs dept 总务部automatic screwdriver 电动启子 thickness gauge 厚薄规 gauge(or jig)治具 power wire 电源线 buzzer 蜂鸣器defective product label 不良标签 identifying sheet list 标示单 screwdriver holder 起子插座 pedal 踩踏板 stopper 阻挡器 flow board 流水板hydraulic handjack 油压板车 forklift 叉车 pallet 栈板 glove(s)手套 gl o v e (s ) w i t h e x p o s e dthumb 大拇指 forefinger 食指 midfinger 中指 ring finger 无名指 little finger 小指 band-aid 创可贴industrial alcohol 工业酒精 alcohol container 沾湿台 head of screwdriver 起子头 sweeper 扫把 mop 拖把vacuum cleaner 吸尘器 rag 抹布garbage container 灰箕 garbage can 垃圾箱 garbage bag 垃圾袋 chain 链条 jack 升降机production line 流水线 chain 链条槽 magnetizer 加磁器 lamp holder 灯架 to mop the floor 拖地 to clean the floor 扫地 to clean a table 擦桌子 air pipe 气管 packaging tool 打包机 packaging 打包 missing part 漏件 wrong part 错件excessive defects 过多的缺陷 critical defect 极严重缺陷 major defect 主要缺陷 minor defect 次要缺陷 not up to standard 不合规格 dimension/size is a little bigger 尺寸偏大(小)cosmetic defect 外观不良slipped screwhead / slippery screw head 螺丝滑头slipped screwhead / shippery screw thread 滑手 speckle 斑点mildewed=moldy=mouldy 发霉 rust 生锈 deformation 变形 burr(金属)flash(塑件)毛边 poor staking 铆合不良 excessive gap 间隙过大 grease/oil stains 油污 inclusion 杂质 painting peel off 脏污 shrinking/shrinkage 缩水 mixed color 杂色 scratch 划伤poor processing 制程不良 poor incoming part 事件不良fold of packaging belt 打包带折皱 painting make-up 补漆 discoloration 羿色 water spots 水渍 po l i s h i n g /s u r f a c e p r o c e s s i n g 表 exposed metal/bare metal 金属裸露 lack of painting 烤漆不到位 safety 安全 quality 品质delivery deadline 交货期 cost 成本 engineering 工程 die repair 模修enterprise plan = enterprise expansion projects 企划 QC品管 die worker 模工production, to produce 生产 equipment 设备 to start a press 开机 stop/switch off a press 关机 classification 整理 regulation 整顿 cleanness 清扫 conservation 清洁 culture 教养qualified products, up-to-grade products 良品defective products, not up-to-grade products 不良品 waste 废料 board 广告牌 feeder 送料机 sliding rack 滑料架defective product box 不良品箱 die change 换模 to fix a die 装模 to take apart a die 拆模 to repair a die 修模 packing material 包材3basket 蝴蝶竺 plastic basket 胶筐 isolating plate baffle plate; barricade 隔板 carton box 纸箱 to pull and stretch 拉深 to put material in place, to cut material, to input 落料 to impose lines 压线to compress, compressing 压缩 character die 字模 to feed, feeding 送料 transportation 运输(be)qualified, up to grade 合格 not up to grade, not qualified 不合格 material change, stock change 材料变更feature change 特性变更 evaluation 评估prepare for, make preparations for 准备parameters 参数rotating speed, revolution 转速 manufacture management 制造管理 abnormal handling 异常处理 production unit 生产单位 lots of production 生产批量 steel plate 钢板 roll material 卷料manufacture procedure 制程 operation procedure 作业流程 to revise, modify 修订 to switch over to, switch---to throw--over switching over 切换 en g i n e e r i nstage die 工程模 automation 自动化to stake, staking, riveting 铆合 add lubricating oil 加润滑油 shut die 架模 shut height of a die 架模高度 analog-mode device 类模器 die lifter 举模器 argon welding 氩焊 Vocabulary for stamping 冲压常词汇stamping, press 冲压punch press, dieing out press 冲床 uncoiler & strainghtener 整平机 feeder 送料机 rack, shelf, stack 料架 cylinder 油缸 robot 机械手 taker 取料机 conveyer belt 输送带 transmission rack 输送架 top stop 上死点 bottom stop 下死点 one stroke 一行程 inch 寸动to continue, cont.连动 to grip(material)吸料location lump, locating piece, block stop 定位块 reset 复位 smoothly 顺利 dent 压痕 scratch 刮伤 deformation 变形 filings 铁削 to draw holes 抽孔 inquiry, search for 查寻 to stock, storage, in stock 库存 receive 领取approval examine and verify 审核 processing, to process 加工 delivery, to deliver 交货 To return/delivery to. to send de l i v eregistration 登记 registration card 登记卡 to control 管制to put forward and hand in 提报 safe stock 安全库存 acceptance = receive 验收 to notice 通知 ap p l i c a t i o n f o r mf o r p u r c h a s e consume, consumption 消耗 to fill in 填写 abrasion 磨损reverse angle = chamfer 倒角 character die 字模 to collect, to gather 收集 failure, trouble 故障 statistics 统计demand and supply 需求 career card 履历卡 to take apart a die 卸下模具 to load a die 装上模具 to tight a bolt 拧紧螺栓 to looser a bolt 拧松螺栓 easily damaged parts 易损件 standard parts 标准件breaking.(be)broken,(be)cracked 断裂to lubricate 润滑common vocabulary for die engineering 模具工程常用词汇 die模具 figure file, chart file 图档 cu t t i n gd ie ,progressive die, follow (-on)die 连续模compound die 复合模 punched hole 冲孔 panel board 镶块 to bending 折弯to pull, to stretch拉伸Line stretching, line pulling线拉伸engraving, to engrave刻印upsiding down edges翻边to stake铆合designing, to design设计design modification设计变化die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate, front board模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板spare dies模具备品spring 弹簧bolt螺栓document folder活页夹file folder资料夹to put file in order整理资料first count初盘人first check初盘复棹人second count 复盘人second check复盘复核人equipment设备waste materials废料casing = containerization装箱quantity of physical inventory second count 复盘点数量Quantity of customs count会计师盘,点数量the first page第一联filed by accounting department for reference会计部存查end-user/using unit(department)使用单位Summary of year-end physicalinventory bills年终盘点截止单据汇总表bill name单据名称This sheet and physical inventorylist will be sent to accountingdepartment together (Those ofNHK will be sent to financialdepartment)本表请与盘点清册一起送会计部－(NHK厂区送财会部)Application status records ofyear-end physical inventory Listand physical inventory card 年终Blank and waste sheet NO.空白与作废单号plate电镀mold成型material for engineering moldtesting工程试模材料not included in physical inventory不列入盘点sample样品incoming material to be inspected进货待验description品名steel/rolled steel钢材Material statistics sheet物料统计明细表meeting minutes会议记录meeting type 会别location地点chairman主席present members出席人员subject主题conclusion结论decision items决议事项approved by / checked by /prepared by核准/审核/承办PCE assembly productionschedule sheetPCE组装厂生产排配表model机锺work order工令revision版次remark备注production control confirmation生产确认checked by初审approved by核准department部门Stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别quality品质prepared by制表notes说明Year-end physical inventorydifference analysis sheet年终盘点差异分析表physical inventory盘点数量difference quantity差异量cause analysis原因分析45raw materials 原料 materials 物料 finished product 成品 semi-finished product 半成品 packing materials 包材 good product/accepted goods/ accepted parts/good parts 良品 defective product/non-good parts 不良品disposed goods 处理品 warehouse/hub 仓库 on way location 在途仓 oversea location 海外仓 spare parts physical inventory list 备品盘点清单skid/pallet 栈板 tox machine 自铆机 wire EDM 线割 EDM 放电机 coil stock 卷料 sheet stock 片料 tolerance 工差 score=groove 压线 cam block 滑块 pilot 导正筒 trim 剪外边 pierce 剪内边 drag form 压锻差slug hole 废料孔 feature die 公母模 expansion dwg 展开图 radius 半径 shim(wedge)楔子 torch-flame cut 火焰切割 set screw 止付螺丝 form block 折刀 stop pin 定位销round pierce punch=die button 圆冲子shape punch=die insert 异形子 stock locater block 定位块 under cut=scrap chopper 清角 active plate 活动板 baffle plate 挡块 cover plate 盖板 male die 公模 female die 母模 groove punch 压线冲子 air-cushion eject-rod 气垫顶杆 spring-box eject-plate 弹簧箱顶板 bushing block 衬套 insert 入块 club car 高尔夫球车 capability 能力parameter 参数 factor 系数phosphate 皮膜化成 viscosity 涂料粘度 alkalidipping 脱脂 main manifold 主集流脉 bezel 斜视规 blanking 穿落模 dejecting 顶固模demagnetization 去磁;消磁 high-speed transmission 高速传递 heat dissipation 热传 rack 上料 degrease 脱脂rinse 水洗 alkaline etch 龄咬 desmut 剥黑膜 D.I. rinse 纯水次 Chromate 铬酸处理 Anodize 阳性处理 seal 封孔 revision 版次 part number/P/N 料号 good products 良品scraped products 报放心品 defective products 不良品 finished products 成品 disposed products 处理品 barcode 条形码 flow chart 流程窗体 assembly 组装 stamping 冲压 molding 成型spare parts=buffer 备品 coordinate 坐标 dismantle the die 折模 auxiliary function 辅助功能 poly-line 多义线 heater band 加热片 thermocouple 热电偶 sand blasting 喷沙 grit 砂砾derusting machine 除锈机 degate 打浇口 dryer 烘干机 induction 感应 induction light 感应光 r e s p o n s e =r e a c t i o n =i n tram连杆 edge finder 巡边器 concave 凸 convex 凹 short 射料不足 nick 缺口 speck 瑕疪 shine 亮班 splay 银纹 gas mark 焦痕 delamination 起鳞 cold slug 冷块 blush 导色 gouge 沟槽;凿槽 satin texture 段面咬花 witness line 证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate钣金lathe车mill锉plane刨grind磨drill铝boring镗blister气泡fillet镶;嵌边through-hole form通孔形式roller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴angular offset角度偏差velocity速度torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机模具工程类plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号)shearing剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱dowel pin固定销coil spring弹簧lifter pin顶料销pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板)67stripping plate 内外打(脱料板) outer stripper 外脱料板 inner stripper 内脱料板 lower stripper 下脱料板 零件类 punch 冲头 insert 入块(嵌入件)deburring punch 压毛边冲子 groove punch 压线冲子 stamped punch 字模冲子 round punch 圆冲子special shape punch 异形冲子 bending block 折刀 roller 滚轴 baffle plate 挡块 located block 定位块 supporting block for location 定位支承块air cushion plate 气垫板 air-cushion eject-rod 气垫顶杆 trimming punch 切边冲子 stiffening rib punch = stinger 加强筋冲子ribbon punch 压筋冲子guide plate 定位板 sliding block 滑块active plate 活动板 lower sliding plate 下滑块板 upper holder block 上压块 upper mid plate 上中间板 spring box 弹簧箱bushing block 衬套 cover plate 盖板 guide pad 导料块 塑件&模具相关英文compre sion molding 压缩成型 flash mold 溢流式模具split mold 分割式模具 cavity 型控 母模 core 模心 公模 taper 锥拔leather cloak 仿皮革 shiver 饰纹 flow mark 流痕 welding mark 溶合痕self tapping screw 自攻螺丝 striper plate 脱料板 piston 活塞 cylinder 汽缸套 chip 细碎物handle mold 手持式模具 移转成型用模具 en c a p s u l a t i o n m o l d i n g 低压封射出成型用模具two plate 两极式（模具） well type 蓄料井insulated runner 绝缘浇道方式hot runner 热浇道 runner plat 浇道模块 valve gate 阀门浇口band heater 环带状的电热器 spindle 阀针 spear head 刨尖头 slag well 冷料井 cold slag 冷料渣 air vent 排气道 h=0.02~0.05mmw=3.2mm L=3~5mm welding line 熔合痕 eject pin 顶出针 knock pin 顶出销 return pin 回位销反顶针 sleeve 套筒stripper plate 脱料板 insert core 放置入子guide pin 导销subzero 深冷处理 three plate 三极式模具 runner system 浇道系统 stress crack 应力电裂orientation 定向sprue gate 射料浇口，直浇口 nozzle 射嘴sprue lock pin 料头钩销(拉料杆) slag well 冷料井 side gate 侧浇口 edge gate 侧缘浇口 tab gate 搭接浇口 film gate 薄膜浇口 flash gate 闸门浇口 slit gate 缝隙浇口 fan gate 扇形浇口 dish gate 因盘形浇口 H=F=1/2t~1/5t T=2.5~3.5mmdiaphragm gate 隔膜浇口 ring gate 环形浇口submarine gate 潜入式浇口 tunnel gate 隧道式浇口 pin gate 针点浇口 Φ0.8~1.0mm Runner less 无浇道 (sprue less)无射料管方式 long nozzle 延长喷嘴方式 sprue 浇口;溶渣质量人员名称类 QC quality control品质管理人员FQC final quality control 终点质量管理人员IPQC in process quality control 制程中的质量管理人员OQC output quality control 最终出货质量管理人员IQC incoming quality control 进料质量管理人员TQC total quality control 全面质量管理POC passage quality control 段检人员QA quality assurance 质量保证人员OQA output quality assurance 出货质量保证人员QE quality engineering 质量工程人员质量保证类FAI first article inspection 新品首件检查FAA first article assurance 首件确认TVR tool verification report 模具确认报告3B 3B 模具正式投产前确认CP capability index 能力指数CPK capability index of process 模具制程能力参数SSQA standardized supplier quality 合格供货商质量评估OOBA out of box audit 开箱检查QFD quality function deployment 质量机能展开FMEA failure model effectiveness analysis 失效模式分析8D 8 disciplines 8项回复内容FA final audit 最后一次稽核CAR corrective action request 改正行动要求corrective action report 改正行动报告FQC运作类AQL Acceptable Quality Level 运作类允收质量水平S/S Sample size 抽样检验样本大小ACC Accept 允收REE Reject 拒收CR Critical 极严重的MAJ Major 主要的MIN Minor 轻微的AOQ Average Output Quality 平均出厂质量AOQL Average Output Quality Level 平均出厂质量Q/R/S Quality/Reliability/Service 质量/可靠度服务MIL-STD Military-Standard 军用标准S I-S IV Special I-Special IV 特殊抽样水平等级P/N Part Number 料号L/N Lot Number 特采AOD Accept On Deviation 特采8UAI Use As It 首件检查报告FPIR First Piece Inspection Report 百万分之一PPM Percent Per Million 批号制程统计品管专类SPC Statistical Process Control 统计制程管制SQC Statistical Quality Control 统计质量管理R Range 全距AR Average Range 全距平均值UCL Upper Central Limit 管制上限LCL Lower Central Limit 管制下限MAX Maximum 最大值MIN Minimum 最小值GRR Gauge Reproducibility & Repeatability 量具之再制性及重测性判断量可靠与否DIM Dimension 尺寸DIA Diameter 直径FREQ Frequency 频率N Number 样品数其它质量术语类QCC Quality Control Circle 品质圈QIT Quality Improvement Team 质量改善小组PDCA Plan Do Check Action 计划执行检查总结ZD Zero Defect 零缺点QI Quality Improvement 质量改善QP Quality Policy 目标方针TQM Total Quality Management 全面质量管理MRB Material Reject Bill 退货单LQL Limiting Quality Level 最低质量水平RMA Return Material Audit 退料认可QAN Quality Ameliorate Notice 质量改善活动ADM Absolute Dimension Measurement 全尺寸测量QT Quality Target 质量目标7QCTools 7 Quality Control Tools 品管七大手法通用之件类ECN Engineering Change Notes 工程变更通知(供货商)ECO Engineering Change Order 工程改动要求(客户)PCN Process Change Notice 工序改动通知PMP Product Management Plan 生产管制计划SIP Specification In Process 制程检验规格SOP Standard Operation Procedure 制造作业规范IS Inspection Specification 成品检验规范9BOM Bill Of Material 物料清单PS Package Specification 包装规范SPEC Specification 规格DWG Drawing 图面系统文件类QC Quality System 质量系统ES Engineering Standardization 工程标准CGOO China General PCE龙华厂文件H Huston (美国)休斯敦C Compaq (美国)康伯公司C China 中国大陆A Assembly 组装(厂)S Stamping 冲压(厂)P Painting 烤漆(厂)I Intel 英特尔公司T TAIWAN 台湾IWS International Workman Standard 工艺标准ISO International Standard Organization 国际标准化组织GS General Specification 一般规格CMCS C-China M-Manufact C-Compaq S-Stamping Compaq产品在龙华冲压厂制造作业规范CQCA Q-Quality A-Assembly Compaq产品在龙华组装厂品管作业规范CQCP P-Painting Compaq产品在龙华烤漆厂品管作业规范部类PMC Production & Material Control 生产和物料控制PPC Production Plan Control 生产计划控制MC Material Control 物料控制ME Manufacture Engineering 制造工程部PE Project Engineering 产品工程部A/C Accountant Dept 会计部P/A Personal & Administration 人事行政部DC Document Center 资料中心QE Quality Engineering 质量工程(部)QA Quality Assurance 质量保证(处)QC Quality Control 质量管理(课)PD Product Department 生产部LAB Library 实验室IE Industrial Engineering 工业工程R&D Research & Design 设计开发部P Painting 烤漆(厂)A Assembly 组装(厂)10S Stamping 冲压(厂)生产类PCS Pieces 个(根,块等)PRS Pairs 双(对等)CTN Carton 卡通箱PAL Pallet/skid 栈板PO Purchasing Order 采购订单MO Manufacture Order 生产单D/C Date Code 生产日期码ID/C Identification Code (供货商)识别码SWR Special Work Request 特殊工作需求L/N Lot Number 批号P/N Part Number 料号其它OEM Original Equipment Manufacture 原设备制造PCE Personal Computer Enclosure 个人计算机外设PC Personal Computer 个人计算机CPU Central Processing Unit 中央处理器SECC SECC` 电解片SGCC SGCC 热浸镀锌材料NHK North of Hongkong 中国大陆PRC People's Republic of China 中国大陆U.S.A the United States of America 美国A.S.A.P As Soon As Possible 尽可能快的E-MAIL Electrical-Mail 电子邮件N/A Not Applicable 不适用QTY Quantity 数量VS 以及REV Revision 版本JIT Just In Time 零库存I/O Input/Output 输入/输出OK Ok 好NG Not Good 不行,不合格C=0 Critical=0 极严重不允许ESD Electry-static Discharge 静电排放5S 希腊语整理,整顿,清扫,清洁,教养ATIN Attention 知会CC Carbon Copy 副本复印相关人员APP Approve 核准,认可,承认CHK Check 确认AM Ante Meridian 上午PM Post Meridian 下午CD Compact Disk 光盘CD-ROM Compact Disk Read-Only Memory 只读光盘FDD Floppy Disk Drive 软盘机HDD Hard Disk Drive 碟碟机REF Reference 仅供参考CONN Connector 连接器CAV Cavity 模穴CAD Computer Aid Design 计算器辅助设计ASS'Y Assembly 装配,组装MAT'S Material 材料IC Integrated Circuit 集成电路T/P True Position 真位度TYP Type 类型WDR Weekly Delivery Requirement 周出货需求C?T Cycle Time 制程周期L/T Lead Time 前置时间(生产前准备时间)S/T Standard Time 标准时间P/M Product Market 产品市场3C Computer,Commumcation,Consumer electronic's 消费性电子5WIH When,Where,Who,What,Why,How to5M Man,Machine,Material,Method,Measurement4MIH Man,Materia,Money,Method,Time 人力,物力,财务,技术,时间(资源) SQA Strategy Quality Assurance 策略质量保证DQA Design Quality Assurance 设计质量保证MQA Manufacture Quality Assurance 制造质量保证SSQA Sales and service Quality Assurance 销售及服务质量保证LRR Lot Reject Rate 批退率BS Brain storming 脑力激荡EMI Electronic Magnet Inspect 高磁测试FMI Frequency Modulated Inspect 高频测试B/M Boar/Molding (flat cable)C/P Connector of PCA/P AssemblySPS Switching power supply 电源箱DT Desk Top 卧式(机箱)MT Mini-Tower 立式(机箱)DVD Digital Video DiskVCD Video Compact DiskLCD Liquid Crystal DisplayCAD Computer AID DesignCAM Computer AID ManufacturingCAE Computer AID EngineeringABIOS Advanced Basic in put/output system 先进的基本输入/输出系统CMOS Complementary Metal-Oxide-Semiconductor Transistor 互补金属氧化物半导体PDA Personal Digital Assistant 个人数字助理IC Integrated Circuit 集成电路ISA Industry Standard Architecture 工业标准体制结构MCA Micro Channel Architecture 微信道结构EISA Extended Industry Standard Architecture 扩充的工业标准结构SIMM Single in-line memory module 单项导通汇流组件DIMM Dual in-line Memory Module 双项导通汇流组件LED Light-Emitting Diode 发光二级管FMEA Failure Mode Effectiveness 失效模式分析W/H Wire Harness 金属线绪束集组件F/C Flat Cable 排线PCB Printed Circuit Board 印刷电路板CAR Correction Action Report 改善报告NG Not Good 不良WPR Weekly Delivery Requirement 周出货要求PPM Parts Per Million 百万分之一TPM Total Production Maintenance 全面生产保养MRP Material Requirement Planning 物料需计划OS Operation System 操作系统TBA To Be Design 待定,定缺D/C Drawing ChangeP/P Plans & ProcedureEMI Electrical-Music Industry 电子音乐工业RFI Read Frequency Input 读频输入MMC Maximum Material ConditionMMS Maximum Material SizeLMC Least Material ConditionLMS Least Material Size。
电子厂常用英语
70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104
feedback Female filter capacitance firmware fixture flow chart follow up For ClassⅡ product For further confirm For further confirm that …… for the first time forefinge Form front plate Fuction Test Fulfillment Rate functional test general manager get off get off work Gift-Box go on（doing） good product Ground
210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244
ring finger Root Cause Analysis S.T.'Standard Time SAA Screw second hand goods Series set up short-term action Signal Generator signal input Socket sorting south American
Hi-pot testing standard voltage improve action in time in。。case insulation sheet It is very urgent Jack just the same kind of KNOB Lable Layout leak out electrolyte leakage current Level Line leader listen functional test workstation little finger Long Term Action look for lots of production lower limit LS Low Frequency Response major defect make sb do sth make sure（that） male Manual manufacture procedure manufacture procedure many kinds IC Master carton match up matching issue material thickness
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
一、常用术语
PDCA Plan Do Check Action 计划执行检查总结面SMT Surface mounting technology表面贴装技术
SMD Surface mounting device 表面贴装设备
SMC Surface mounting components 表贴装元件
MIMA manual insert 手工插件
machine assembly 机器组装
Screen printer 电子印刷机
Reflow 回流焊
Pilot run 试生产
Oven 烤箱，烤炉
Solder 焊接
Solder wetting 焊剂润湿
Profile 剖面外形轮廓
Chain 链条
Chain conveyor 链条传送
Solder iron 烙铁
Flux 助焊剂
3C
Computer 电脑类产品
Consumer electronics 消费性电子产品
Communication 通讯类产品
FOUR CONTROL SYSTEM 四大管制系统
Engineering control system 工程管制系统
Quality control system 品质管制系统
Manufacturing control system 生产管制系统
Management control system 经营管制系统
7S
Classification 整理（sorting, organization）-seiri
Regulation 整顿（arrangement, tidiness）-seiton
Cleanliness 清扫（sweeping, purity）-seiso
Conservation 清洁（cleaning, cleanliness）-seiktsu
Culture 教养（discipline）-shitsuke
Safety 安全
二、英文缩写
品质人员名称类
QC quality control 品质管理人员
FQC final quality control 终点品质管制人员IPQC in process quality control 制程中的品质管制人员
OQC output quality control 最终出货品质管制人员
IQC incoming quality control 进料品质管制人员TQC total quality control 全面质量管理
QA quality assurance 质量保证人员
OQA output quality control 出货质量保证人员QE quality engineering品质工程人员
品质保证类
FAI first article inspection 新品首件检查
FAA first article assurance 首件确认
SSQA standardized supplier quality audit 合格供应商品质评估FQC运作类
AQL Acceptable Quality Level 允收品质水准
ACC Accept 允收
REE Reject 拒收
CR Critical 极严重的
MAJ Major 主要的
MIN Minor 轻微的
P/N Part Number 料号
L/N Lot Number 批号
UAI Use As It 特采
FPIR First Piece Inspection Report 首件检查报告DPPM Defective Percent Per Million 百万分之缺陷
制程统计品管类
SPC Statistical Process Control 统计制程管制
SQC Statistical Quality Control 统计品质管制
DIM Dimension 尺寸
DIA Diameter 直径
其它品质术语类
ZD Zero Defect 零缺陷
QP Quality Policy 品质方针
TQM Total Quality Management 全面品质管理
RMA Return Material Audit 退货认可
7QCTools 7 Quality Control Tools 品管七大手法
ECN Engineering Change Notice 工程变更通知（供应商）
ECO Engineering Change Order 工程改动要求（客户）PCN Process Change Notice 工序改动通知
PMP Product Management Plan 生产管制计划
SIP Standard Inspection Procedure 制程检验标准程序SOP Standard Operation Procedure 制造作业规范
BOM Bill of Material 物料清单
SPEC Specification 规格
DWG Drawing 图面
系统文件类
ISO International Standard Organization 国际标准化组织
部类
QE Quality Engineering 品质工程
QA Quality Assurance 品质保证
LAB Laboratory 实验室
IE Industrial Engineering 工业工程
R&D Research&Design 设计开发部
生产类
PCs Pieces 个（根、块等）
CTN Carton 卡通箱
PAL Pallet/skid 栈板
PO Purchasing Order 采购订单
M OＭａｎｕｆａｃｔｕｒｅＯｒｄｅｒ生产单
D/C Date Code 生产日期码
ID/C Identification Order（供应商）识别码
L/N Lot Number 批号
P/N Part Number 料号
OEM Original Equipment Manufacture 原设备制造
QTY Quantity 数量
NG Not Good 不行，不合格
C=0 Critical=0 极严重不允许
APP Approve 核准，认可，承认CHK Check 确认
ASSY Assembly 装配，组装
LRR Lot Reject Rate 批退率
PCB Printed Circuit Board 印刷电路板
CAR Correction Action Report 改善报告
TBA To Be Assured 待定，定缺
A VL Approved Vendor List 许可供应商清单
EOL End of Life
三、专业词汇
组装类
Assembly line 组装线Layout 布置图Conveyor 流水线运输带Screw driver 起子
Electric screw driver 电动起子Automation 自动化Conveying belt 输送带。