光纤收发器说明书NT-1100S
Omate1100N光纤收发器使用说明书
Omate1100N 光纤收发器 使用说明书 V1.0
BEIJING OMATE DIGITAL TECHNOLOGY CO., LTD.
Contents
................................................................................... .5
......................................................................................... 10 ...................................................................... ............... 10
6-13
User Manual
Chapter 2 Installation 第二章 安装说明
图二. 光纤收发器机架
前面板图
图三. 光纤收发器机架后面板图
User Manual
7-13
8-13
一光两电 ,英文, 光纤收发器 ,说明书
1-port 100M FX 2-Ports10/100M TX Media ConvertersUser’s Manual 1．OverviewThis Media Converter Complies with IEEE802.3 Standards. It is designed to Convert data signal between 10/100Base-TX and 100Base-FX fast Ethernet. The media converter is connected between Fiber cable and twisted cable segments with network operating smoothly. This converter can be used as a standalone unit or asa slide-in module to the 14 converter rack.2.ChecklistBefore you installing the Switch, verify that the package contains the following：1．The TP-Fiber Converter2．AC-DC Power Adapter.3．This User’s Manual.Piease notify your sales representative immediately if any of the aforementioned items is missing or damaged.3. LED DescriptionThere are 6 LED At Front View of 2 port Media ConverterLED Definition SpecificationPWRIndicator ofpowersupplyON when the power supply isturned on and in normal workingstatusFRXOpticalinterfacestatusindicatorBright when optic fiber cable isconnected well, but no datatransmissionBlinking when receiving dataTRXEthernetinterfacestatusindicatorBright when twisted pair isconnected well, but no datatransmissionBlinking, when receiving dataFDXEthernetinterfacemodeindicatorON, Full duplexOFF, Half duplex4.Technical SpecificationsOptical ParametersMultimodeFiber 62.5/125, 50/125,100/140µmOutputopticalpower-20~-14dBmReceivingsensitivity<-31dBDistance 0~2km or 0~5kmConnector SC, ST, FCWavelength 850nm/1310nmSinglemodeFiber 9/125,8.3/125,8.7/125or 10/125µmDistance 0~20km 0~40km 0~60kmOutputopticalpower-12~-8dBm -8~-3dBm -3~ 0dBmReceivingsensitivity< -37dBm < -37dBm < -38dBmConnector SC, ST, FCWavelength 1310nmDistance 0~80km 0~120kmOutputopticalpower-3~ 1dBm -3~ 2dBmReceivingsensitivity< -38dBm < -38dBmConnector SC, ST, FCWavelength 1550nm(DFB)when less than 15km, use attenuator5.Installing the ConverterFor as a standalone unita)Verify the AC-DC adapter conforms to your countryAC Power requirement and insert the power plugb)Connect the media cable for network connectionfor as a slide-in unitc)The slide-in Media Converter and Converter Rackshould be supplied only form the same source, bothMedia Converter and Rack are built to match eachother at dimensions, DC jack, DC receptacle andpower safelyd)Turn off the 19” converter rack powere)Ensure that there is no activity in the networkf)Locate +5VDC power jack on converter back,carefully slide in and plug to 19” rack +5VDCpower receptacleg)Connect the media cable for network connectionh)Turn on the converter rack power , the Power LEDwill light up6.Cable Connection Parameter100Base-X network allows 512-bit time delay between any two node stations in a collision domain. The overall Bit-timeof TP/Fiber wires and devices must be within 512bit in a segment. You may use a switch to break up collision domain and extend the cabling distance.●TP Cable Limitations：Cat.5 100m●Multi-mode Converter Fiber Cable Lions：SC/ST/FC/LC Multi-mode Converter Models：Multi-modeFull-duplexNode to Node ：2KmNode to Switch ：2KmSC/ST/FC/LC Single Mode Converter Models：SC．S20Full-duplexNode to Node ：20KmNode to Switch ：20Km7.TP-Fiber Technical Specifications●Standards:I EEE802.3 IEEE802.3u 10/100Base-TX 100Base-Fx●TP Port: RJ45●UTP Cable: Cat.5 cable up to 100m●Wavelength: 1310nm/1550nm●Fiber cable(um):50/125,62.5/125,or 100/140/um multi-mode8.3/125,8.7/125,9/125/or10/125/um single-mode●Max distance:Singlemode:20~120kmMultimode: 2km●LED Indicators:FDX, TRX FRX,PWR●Data Transfer Rate:Speed Forwarding Rate100Mbps 148,800PPS10Mbps 14,880PPS*Flow Control:IEEE802.3x compliant for full-duplex Backpressure flow control for half-duplex* Power Requirement:2A@+5VDC*Ambient Temperatur e:0 to 60℃* Humidity:5% to 90%*Dimensions: 25(H)70 (W)94(D)mm●Note: Connecting to Router, Bridge, or Switch, pleaserefer to the device's Technical Manual。
智能化系统方案之光纤收发器参数
智能化系统方案之光纤收发器参数光纤收发器使用说明一. 概述以太网光纤收发器以太网光纤收发器在网络中可以完成以太网数据从铜线到光纤或从光纤到铜线传输介质的转换。
在网络中，电信号在铜线的极限传输距离（一次中继）仅为100 米，而光信号在光纤中可传输达百公里，因而光纤收发器使以太网无限延伸。
在光纤到楼这一运用领域中，他可作为楼道交换机光纤uplink, 也可作为宽带小区中汇接交换机的每个端口的光电转换器（机架式）。
光纤收发器广泛应用于城域网、大型企业网、校园网、宽带小区等网络的组建。
以太网光纤收发器功能特点采用优质光电一体化模块，提供良好的光特性和电气特性，保证数据传输的可靠性，MTBF>10 5小时，符合电信运营标准。
支持外置、内置、2U 机架、3U 机架，方便用户选择。
全双工/ 半双工自适应，直连线/ 交叉线自适应。
支持10/100/100Base-Fx 光纤传输标准，可与其他网络产品相通。
支持IEEE802.1Q 及ISL 可选骨干连接。
支持SPANNING TREE 构造容错网络。
支持热插拔。
二．以太网10/100M 自适应收发器以太网光纤收发器可以将10/100Base-Tx 双绞线电信号和100Basw-Fx 的光信号进行相互转化。
他将网络的传输距离极限从铜线的100 米扩展到100 公里（单模光纤）。
光纤收发器的典型应用是以太网长距离互联，由于具有自适应的功能，在与交接机相连时，交换机不需要任何设置。
状态指示灯说明PWR（POW）: 电源指示灯FDX: 光纤连接指示及全双工与半双工状态指示灯FX: 光纤连接动态指示灯TX: 双绞线连接动态指示灯10/100 ：速率10/100Mbps 指示灯Tx: 双绞线连接指示灯双电口百兆收发器LINK亮光纤连接正常，闪烁光纤链路在传输数据SPD1-2 亮双绞线连接正常，闪烁双绞线链路在传输数据FDX1-2 全双工PWR 电源技术标准支持IEEE802.3Ethernet 、IEEE802.3u100Base-Tx/10Base-Tx 和IEEE802.3u100Base-Fx 三．以太网千兆光纤收发器内置高频交换核心芯片，数据速率达1000Mbps ，大大提高网络运行速度，满足用户宽带需要。
光纤收发器 NT-1100
Contents1. Product :NMS-Type media converter (2)Model: NT-102M Series (2)2. Product: Intelligent Fast Ethernet Media Converter (6)Model: NT-1100 Series (6)3. Product:10/100/1000M Media Converter (9)Model: NT-3012 Series (9)4. Product: Gigabit Ethernet Media Converter (12)Model: NT-2100 Series (12)5. Product: NT-16 Media Converter Rack (15)Model: NT-16 (15)6. Product: NT-14 Media Converter Rack (17)Model: NT-14 (17)7. Product: NT-1020 10/100M mode Converter (19)Model: NT-1020 Series (19)8. Product: NT-2020 GIGA mode Converter (22)Model: NT-2020 Series (22)9. Product: 10/100M media converter with 2-TX ports (24)Model: NT-1200 Series (24)NT-4500PD (27)PD (Powered Device) 10/100Base-TX-to-100Base-FX Media Converter (27)NT-4500PSE (29)PSE (Power Source Equipment) 10/100Base-TX-to-100Base-FX Media Converter (29)10 Product: RS232/422/485 Fiber Optic Modem (31)Model: NT-277 Series (31)11. Product: PDH Series Optical Multiplexers (33)Model: PDH Series (33)12. Product: E1-10/100BASE-T Bridge (36)Model: NE-2701, NE-2702 (36)13. Product: V.35 Protocol Converter (39)Model: NE-2703, NT-2704 (39)13. Product: V.35 Fiber Optic Modem (42)Model: NE-2707 (42)13. Product: 4E1-10/100Base-T Bridge (45)Model: NE-2708 (45)13 Product: E1 Fiber Optic Modem (47)Model: NE-2706 (47)1. Product: NMS-Type Media ConverterModel: NT-102M SeriesProduct OverviewNT-102M, a 10/100M adaptive fast Ethernet media converter with network management system, supports Web interface management, remote Telnet management & software upgrade, and serial port management & software upgrade, which can monitor working status and configure the modes of the local and the remote device.The 10/100M media converter completely complies with such international standards as 10Base-T, 100Base-TX, 100Base-FX and IEEE 802.3x, and is fully compatible with network interface cards, relays, hubs and switches of other manufacturers. It provides a low-cost and high-reliability hardware solution for information transmission in broadband private networks and fiber broadband metropolitan area networks.Function & Features∙Graphic management interface based on WEB address and SNMP protocol;∙Supporting LFP (Link Fault Pass Through) of the local and remote;∙The network interfaces of the NMS proxy module and NMS media converter module support the auto-sense of MDI-MDIX∙Compliance with IEEE 802.3u 100BASE-FX/TX and IEEE802.3 10BASE-T;∙Supporting IEEE 802.1Q VLAN;∙Supporting 10/100M auto sensed, full/half-duplex auto sensed;∙Supporting the transmission of packets of 1600 bytes at the maximum;∙Supporting Quality of Service (QoS), and he transmission of VoIP packets;∙Supporting Spanning Tree Protocol (STP) to form a redundant network;∙Supporting hot swapping in the rack;∙Card type can be plug into both desktop box and the rack;∙Extremely low power consumption, low heat, reliable and stable performance, and long lifetime;∙Options in multimode dual fiber, single mode and single mode single fiber∙Options in different types of optical interfaces, such as SC, ST, etc.Technical ParametersOptical FeaturesTypical Application of Media Converter in overall Network Connection in centralized management modeConnection in point-to-point modeOrder Information2. Product: Fast Ethernet Media ConverterModel: NT-1100 SeriesIntelligent Fast Ethernet Media Converter SeriesOverviewDue to its unique function of link failure alert between electrical port and optical one, the intelligent 10/100M adaptive fast Ethernet media converter can replace the media converter with network management to greatly reduce the system cost.NT-1100 Ethernet media converter can interconvert electrical signals of 10Base-T and100Base–TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120 km via fiber optical cable. It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1cut-through). It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber.Features∙10/100Mbps auto-sensed, facilitating network upgrade∙Built-in efficient switching core to implement flow control and reduce broadcast packets∙full-duplex and half-duplex auto-sensed∙Supporting automatic cross connection of twisted pair interfaces, facilitating system commissioning and installation∙Supporting Link Failure Alert (LFA)∙Supporting half /full-duplex of FX and link failure alert with optional dip-switch∙Supporting 10/100Mbps store-and-forward and 100Mbps cut-through transmission with optional dip-switch(unique)∙Supporting low-timelag transmission∙Supporting the transmission of extra-long packets up to1600 bytes∙Supporting the transmission of extra-long VLAN packets∙Supporting Quality of Service (QoS) , ensuring the transmission of VoIP packets ∙Supporting STP to form a redundant network∙Extremely low power consumption (less than 2W), low heat, reliable and stable performance, and long lifetime;∙Options in single mode dual fiber, multi-mode dual f fiber, and single mode in single fiberApplication10/100Mbps fast optical Ethernet long-distance transmitting network Technical IndexesOrder Information3. Product: 10/100/1000M Media ConverterModel: NT-3012 Series10/100/1000M Self-sensed Gigabit Ethernet Media Converter SeriesOverviewNT-3012 10/100/1000Mbps adaptive Gigabit Ethernet media converter adopts switching technology to fulfill media conversion. It complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards. Presently it supports two types of media network connections: 10Base-T/100Base-TX/1000Base-T, and 1000Base-SX/LX, inter-converting electrical signals of 10Base-T/100Base-TX/1000Base-T twisted pairs with optical signals of 1000Base-SX/LX. It extends the transmission distance of network from 100m via copper cable to 20 km via fiber optical cables. It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber.Features∙Completely compatible with products of CISCO, HUAWEI and 3COM.∙The product adopts a low-power-consumption chip; the heat output is so low that no heat dissipation facility is needed.Supporting inter-conversion between adaptive 10Base-T/100Base-TX/1000Base-T and ∙1000Base-SX/LX∙Supporting full-duplex and half-duplex and its auto-sensed∙Supporting automatic cross connection of twisted pair interfaces, facilitating system commissioning and installation∙Supporting the transmission of extra-long VLAN packets∙Supporting Quality of Service (QoS) and ensuring the transmission of VoIP packets;∙Supporting STP to form a redundant network;∙Options in single mode dual fiber, multi-mode dual fiber, and single mode in single fiberApplication10/100/1000Mbps Gigabit optical Ethernet long-distance transmitting network Technical IndexesOrder Information4. Product: Gigabit Ethernet Media ConverterModel: NT-2100 SeriesGigabit Ethernet Media Converter SeriesOverviewNT-2100 1000Mbps Gigabit Ethernet media converter adopts switching technology to fulfill media conversion. It complies with IEEE802.3z and IEEE802.3ab standards, and supports two types of media network connections: 1000Base-T and 1000Base-SX/LX. It inter-converts electrical signals of 1000Base-T twisted pairs with optical signals of 1000Base-SX/LX, extending the transmission distance of a network from 100m via copper cables to 50 km via fiber optical cables. It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber.Features∙Supporting inter-conversion between 1000Base-T and 1000Base-SX/LX∙Supporting full-duplex and half-duplex and its auto-sensed∙Supporting automatic cross connection of twisted pair interfaces, facilitating system commissioning and installation∙Supporting the transmission of extra-long VLAN packets∙Supporting Quality of Service (QoS) and ensuring the transmission of VoIP packets;∙Supporting STP to form a redundant network;∙Options in single mode dual fiber, multi-mode dual fiber, and single mode in single fiberApplication1000Mbps Gigabit optical Ethernet long-distance transmitting networkTechnical IndexesOrder Information5. Product: NT-16 Media Converter RackModel: NT-16OverviewNT-16 is a kind of cost-effective media converter rack (2U) widely used in the equipment room. Different types of module type media converter developed by our company can be inserted into this rack, which total slots up to 16. It is furnished with two power supplies: main power supply and spare one, and supports its automatic switch-over.Features∙The configuration of active/standby power supply ensures uninterruptible operation of the system.∙Provide two power supplies (AC 220V, and DC -48V), enabling the system can work under many operating environments;∙Supporting simultaneous operation of several module type (module type) media converters at different rates, which greatly improves system adaptability;∙Each card supports hot swapping;∙Applicatory module types: NT-1100 series, NT-102F series, NT-S102F series, NT-S1100P series, NT-102M series, NT-2100F series, NT-2100D series, andNT-3012P series.Technical IndexesOrder Information6. Product: NT-14 Media Converter RackModel: NT-14OverviewNT-14 is a kind of cost-effective media converter rack (2U) widely used in the equipment room. Different types of module type media converter developed by our company can be inserted into this rack, which total slots up to 14. It is furnished with two power supplies: main power supply and spare one, and supports its automatic switch-over.Features∙The configuration of active/standby power supply ensures uninterruptible operation of the system.∙Provide two power supplies (AC 220V, and DC -48V), enabling the system can work under many operating environments;∙Supporting simultaneous operation of several module type (module type) media converters at different rates, which greatly improves system adaptability;∙Each card supports hot swapping;∙Applicatory module types: NT-1100 series, NT-1100S series, and NT-2100 series. Technical IndexesOrder Information7. Product: NT-1020 Single-/Multi-mode Converter Model: NT-1020 SeriesOverviewNT-1020 series single-/multi-mode converters are applied in 100Mbps fast Ethernet Network which is wired with both single mode fibers and multi-mode fibers. It can not only fulfill the conversion of single mode and multi mode at 1310nm wavelength, but also that of 850nm/1310nm and 1550nm wavelengths, which functions as a relay and then makes multi-mode fibers transmit farther. It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber.Features∙Supporting IEEE802.3u 100Base-FX standards∙Supporting full-duplex and half-duplex and its auto-sensed∙Supporting conversion between 850nm/1310nm multi-mode fibers and 1310nm/1550nm single mode fibers∙Supporting direct and transparent transmission of packets at different lengths ∙Supporting the transmission of extra-long VLAN packets∙Supporting Quality of Service (QoS) and ensuring the transmission of VoIP packets;∙Supporting STP to form a redundant network;∙Low power consumption, low heat, reliable and stable performance, and long lifetime;∙Options in single mode in dual fiber, multi-mode in dual fiber, and single mode in single fiberApplication100Mbps optical Ethernet long-distance transmitting systemTechnical IndexesOrder Information8. Product: NT-2020 Single-/Multi-mode Converter Series Model: NT-2020 SeriesOverviewThe NT-2020 series single-/multi-mode converters are applied in 1000Mbps fast Ethernet Network, which is wired with both single mode fibers and multi-mode fibers. It can not only fulfill the conversion of single mode and multi mode at 1310nm wavelength, but also that of 850nm/1310nm and 1550nm wavelengths, which functions as a relay and then makes multi-mode fibers transmit farther. It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber.Features∙Supporting IEEE802.3z 1000Base-SX/LX standards∙Supporting full-duplex/half-duplex∙Supporting conversion between 850nm multi-mode fibers and 1310nm/1550nm single mode fibers∙Supporting direct and transparent transmission of packets at different lengths ∙Supporting the transmission of extra-long VLAN packets∙Supporting Quality of Service (QoS) and ensuring the transmission of VoIP packets;∙Supporting STP to form a redundant network;∙Low power consumption, low heat, reliable and stable performance, and long lifetime;∙Options in single mode in dual fiber, multi-mode in dual fiber, and single mode in single fiberApplication1000Mbps optical Ethernet long-distance transmitting systemTechnical IndexesOrder Information9. Product: Media Converter with Two Electrical Ports Model: NT-1200 SeriesOverviewNT-1200 series, one kind of 10/100Mbps adaptive fast Ethernet media converter, with a two-port 10M/100Mbps adaptive switch built in, can inter-convert electrical signals of 10Base-T and/or 100Base-TX twisted pairs with optical signals of 100Base-FX. It extends the transmission distance of a network from 100m via copper cables to 120 km (via single mode full duplex fiber optical cables). The product supports two different types of network connection mediums: 10/100Base-TX and 100Base-FX, and fulfills data transmission between the two types of network connection mediums with switching technology and store-and-forward technology. It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber.Features∙10/100Mbps auto-sensed, facilitating network upgrade∙Built-in efficient switching core to implement flow control and reduce broadcast packets∙Providing four respective 10M/100Mbps adaptive twisted pair switching ports to implement the backup of electrical ports and the access of multiple users ∙Providing two electrical ports based on VLAN switch, to support the connection of different unit users∙Supporting full-duplex and half-duplex and its auto-sensed∙Supporting automatic cross connection of twisted pair interfaces, facilitating system commissioning and installation∙Supporting the transmission of extra-long packets up to 1552 bytes∙Supporting STP to form a redundant network;∙Low power consumption, low heat, reliable and stable performance, and long lifetime;∙Options in single mode in dual fiber, multi-mode in dual fiber, and single mode in single fiberApplication10/100Mbps fast optical Ethernet long-distance transmitting networkTechnical IndexesOrder InformationNT-4500PDPD (Powered Device) 10/100Base-TX-to-100Base-FX Media ConverterNT-4500PD converts 10/100Base-TX to 100Base-FX. It supports the LFP (Link Fault Pass Through) function. If the link at TP or FX end fails, its LFP function will force the other end to close, which will make the engineers easy to trace whether a network link fails or not. It greatly firms the integrity and consistency of the connection between twisted pairs and fibers, and therefore improves the network maintainability.Features∙Compliance with the IEEE802.3af PoE (Power over Ethernet) PD standard∙Supporting LFP (Link Fault Pass-through)∙Options in connectors (SC, ST or LC), and multi-mode or single mode∙With side switch, easy setting∙External power supplyTechnical Indexes∙Standards: IEEE802.3u, 10/100Base-TX, 100Base-FX∙Data transmission rate♦100Mbps: 148,800 pps♦10Mbps: 14,880 pps∙Interface♦RJ-45: 10/100Mbps (Auto-sensed)♦MM SC, SM SC, MM MTRJ, MM VF-45, SM BiDi, MM LC, SM LC: 100M bps∙Cable♦Fibers (multi-mode): 50/125, 62.5/125, 100/140μm♦Fibers (single mode): 8.3/125, 8.7/125, 9/125, 10/125μm∙Flow control♦IEEE802.3x compliant for full-duplex (full duplex)♦Backpressure flow control for half-duplex (half duplex)∙LED indicators: FX Link/Act, FX FDX/Col, TX Link/Act, TX 100, PSE Power Good, PSE Power Bad, Power∙Power supply: 1A@+5VDC from AC-DC Adapter 0.5A@+5VDC from PoE∙Temperature 0~50°C∙Humidity 5%~90%∙Dimensions 26.2(H) x 70.3(W) x 94(D) mm∙Safety Regulations: FCC Part 15 Class A, CE MarkNT-4500PSE (Power Source Equipment)10/100Base-TX-to-100Base-FX Media ConverterNT-4500PSE converts 10/100Base-TX to 100Base-FX. It supports the LFP (Link Fault Pass Through) function. If the link at TP or FX end fails, its LFP function will force the other end to close, which will make the engineers easy to trace whether a network link fails or not. It greatly firms the integrity and consistency of the connection between twisted pairs and fibers, and therefore improves the network maintainability. It also supports the FEF (Far End Fault) function: the converter senses the status of the optical interface at the remote. If the optical interface at the remote does not receive the information, the electrical port will automatically close and data transmitting will stop. As the result, the loss of important data will be efficiently avoided. The product complies with the IEEE802.3af PoE (Power over Ethernet) standard. As one kind of PSE(Power Sourcing Equipment), it obtains -48V DC voltage through the fiber optic link for data transmitting, and then supply power to the PD (powered device) in compliance with the IEEE802.3af standard via UTP.NT-450PSE delivers such functions as PD sensation, power monitor, over voltage protection, undervoltage detection, and fault protection input.Features∙Compliance with the IEEE802.3af PoE (Power over Ethernet) PSE standard∙Supporting LFP (Link Fault Pass-through)∙Options in connectors (SC, ST or LC), and multi-mode or single mode∙With side switch, easy setting∙Internal power supplyTechnical Indexes∙Standard: IEEE802.3u, 10/100Base-TX, 100Base-FX∙Data transmission rate♦100Mbps: 148,800 pps♦10Mbps: 14,880 pps∙Interface♦RJ-45: 10/100Mbps (Auto-sensed)♦MM SC, SM SC, MM MTRJ, MM VF-45, SM BiDi, MM LC, SM LC: 100Mbps∙Cable♦Fibers (multi-mode): 50/125, 62.5/125, 100/140μm♦Fibers (single mode): 8.3/125, 8.7/125, 9/125, 10/125μm∙Flow control♦IEEE802.3x compliant for full-duplex (full duplex)♦Backpressure flow control for half-duplex (half duplex)∙LED indicators: FX Link/Act, FX FDX/Col, TX Link/Act, TX 100, PSE Power Good, PSE Power Bad, Power∙Power Supply: 100 – 240 VAC, 47 –63 Hz∙Power consumption: 45W (maximum)∙Temperature 0~50°C∙Humidity 5%~90%∙Dimensions 30(H) x 185W) x 112(D) mm∙Safety Regulations: FCC Part 15 Class A, CE Mark10 Product: RS232/422/485 Fiber Optic ModemModel: NT-277 SeriesRS 232/485/422 Serial Port Fiber Optic Modem OverviewNT-277 is a type of RS-232/RS-485/RS-422 serial port fiber optic Modem. It adopts industrial standard design and its wall type outface design supports DIN-rail standard lead rail installation, featuring easy installation. Presently, many users make use ofRS-232/RS-485/RS-422 serial port fiber optic Modem to solve the electromagnetic interference in engineers and to extend the RS-232/RS-485/RS-422 serial port transmission distance to several or even tens of kilometers. NT-277 can provide users with RS-232/RS-485/RS-422 serial port end-to-end transparent transmission. Since signals are transmitted over fibers and these optical signals are free of electrical conductivity, they have strong anti-interference capacity and are immune to high-voltage power or thunders.Features∙Zero-Delay automatic forwarding∙Supporting three types of interfaces: RS232/485/422∙Automatic detection of serial port rate, judgment and control of data transmission direction∙Working wavelength: 850 nm (multi-mode); 1310 nm (single mode)∙Maximum communication rate: 500 Kbps∙Optional optical interfaces: ST/SC/FC∙Up to 2 kilometers in multi-mode transmission and up to 40 kilometers in single mode transmission∙Broad voltage inputs: 5-40 VDC or 85-265 VAC∙The interface supports 1500W surge protection and 15KV ESD protection∙External power supplyCommunication IndexesOrder Information11. Product: PDH Series Optical MultiplexersModel: PDH SeriesPDH Optical Multiplexer1) Product OverviewPDH optical multiplexer is a kind of point-to-point optical transmission equipment developed by our company on the core of large-scale integrated circuit chips. It is applicable to remote transmission of switches, and small/medium-capacity applications transmitted over fibers, including mobile communication base stations, wireless local communication base stations and paging stations. The equipment features perfect overall performance, stable and reliable operation, low power consumption, high integration, small size and easy installation and maintenance. It is intended for carries and such fields as post and telecommunications, electrical power, railway, water resources, oilfields, and banks.2) Main Features∙NT240B+/NT480B+ adopts two integrated media converter modules operating in active/standby mode (optional);∙Providing 4 to 16 E1 (2.048KB/S) interfaces and one wire speed 10/100M adaptive Ethernet interface;∙Full duplex/half-duplex adaptive operating mode;∙Full digital clock recovery and smooth phase lock technology;∙The code pattern of the E1 interfaces is HDB3 code, and the E1 jitter tolerance, transfer characteristic and output jitter completely meet the ITU-T G.703, G.823and G.742 protocol.∙One PCM, without occupying 2M channel for transmission;∙Providing a user RS232 transparent data channel, and supporting unified network management;∙Providing perfect alarm and indication signals as well as alarm mask functions, using LED to display local and remote alarms and general alarms, capable ofcontrolling remote loopback;∙Ensuring a transmission distance of over 40 km without relay;∙Board-level design for the integrated equipment, featuring high reliability and stable performance;∙Optional 220V AC power supply or -48V DC power supply.3) Technical Indexes4) Typical Application5) Order Information12. Product: E1-10/100BASE-T BridgeModel: NE-2701, NE-2702E1-10/100BASE-T Bridge1) Product OverviewThe design of NE-2701 Ethernet-E1 converter adopts the ASIC chip as the core, which features simple circuits and compact structure and enhances the reliability of the integrated equipment. The Ethernet-E1 converter provides data transmission channels at a maximum bandwidth of 2.048M for the Ethernet over coaxial cables and connects two LANs through coaxial cables. It is applicable to multiple application scenarios including LAN extension, network isolation, and access of LAN into WAN. It connects an Ethernet network to a telecommunications transmission network, a private network or a WAN.2) Product Features∙Supporting IEEE802.3Q VLAN frames and 1536 bytes jumbo frames∙Supporting data transmission from 10/100M Ethernet to E1∙Configurable Ethernet bandwidth, supporting a maximum rate of 2.048 Mbps ∙Supporting full-duplex PAUSE flow control function∙Supporting address filtering function∙RJ45 interface, supporting adaptive crossover and straight-through cabling∙Supporting the reset of a remote system from a local system∙Supporting audio alarm function, with the audio alarm system to be disabled by the user at any time∙Supporting E1 line loopback function∙Built-in switching power supply, overall power consumption < 3W; external 220V AC and -48V DC interface3) Technical ParametersTypical ApplicationsE thernet E1 converter E1 linkE thernet E1converterTypical Application (1)E thernet fiberoptic Modem Centralized E1 fiberoptic ModemE thernet E1converterTypical Application (2) 4) Order Information13. Product: V.35 Protocol ConverterModel: NE-2703, NT-2704V.35 ConverterProduct OverviewNE-2703 converter implements the conversion from V.35 interface to E1 (2048 Kbps) interface and the conversion from E1 (2048 Kbps) to V.35 interface. Therefore, it implements the connection between the router without G7.03 interfaces and the transmission equipment such as optical multiplexes. It has been widely applied to data communication equipment, for example, connection between a router and a WAN interface, access of DDN network, transmission optimization of mobile telephone network, and various transmission access of E1-based PCM network.Features∙Outstanding performance in jitter transmission features of E1 channel input, far superior to industrial standards∙E1 interface supports two working modes of framed/unframed and provides 120Ω/balanced and 75Ω/unbalanced impedance interfaces at the same time ∙E1 port adopts digital clock recovery circuit and smooth phase-locked circuit∙V.35 interface supporting automatic detection function, capable of automatic detection and adaptation of the phase which receives data, and optimizingsampling points∙Providing three clock modes: master clock, external clock, and slave clock∙Perfect link alarm indication function, supporting local and remote tributary loopback, facilitating test∙Simple circuit design, stable equipment operation, and low fault rate∙All settings performed on the panel, making operation easyTechnical IndexesTypical ApplicationsV.35/E1 converter E1 linkV.35/E1converter13. Product: V.35 Fiber Optic ModemModel: NE-2707Product OverviewV.35 fiber optic Modem is a kind of communication equipment to transmit one channel of V.35 data over a pair of fibers. It uses ASIC chip, adopts modular structure inside, integrates the functions of coding, decoding, information insertion, and alarm switchover,. Therefore its circuit is simple, structure is compact and power consumption is low. It is widely used in the occasions that require high reliability and complete auxiliary functions.Features∙Providing one optical port, supporting point-to-point connection in pairs or connection to E1 fiber optic Modem;∙Providing one V.35 port, with the rate of N ⨯ 64 Kb/s (N = 1-32), adjustable∙Providing three timing modes: mater timing, tracing V.35 port, and tracing optical port∙Supporting automatic tracing function of remote timeslot bandwidth∙Providing auto-sensation between the receive clock and data phase at V.35 port ∙Supporting multiple loopback functions and bit error of internal link test function, facilitating engineering commissioning∙Providing the remote electrical outage detection function, which can tell whether it is fiber cut or the remote electrical outage∙Rich panel display enables the user easy to identify the faultTypical ApplicationsV.35 fiber optic ModemV.35 fiber optic ModemLocalRemoteTwo V.35 fiber optic modems are connected through fibers, which connects two routers with V.35 interface.Figure 1-3-1 Typical Application (1)A V.35 fiber optic Modem is connected with a E1 fiber optic Modem through fibers. The router connected with the V.35 fiber optic Modem has a V.35 interface, and the router connected with the E1 fiber optic Modem has E1 interface.Figure 1-3-2 Typical Application (2)V.35 fiberoptic ModemV.35 fiberoptic ModemV.35 fiber optic ModemCentralized E1 fiber optic ModemBased on application (2), transmit transparently the E1 circuit to the equipment room of the user through SDH/PDH network, and connect with a V.35-to-E1 converter, and then to a router.Figure 1-3-3 Typical Application (3)Technical ParametersTechnical Parameters of Optical Interface1) Optical link rate: 4.096 Mb/s2) Wavelength: 1310 nm (standard) / 1550 nm (optional)3) Transmission distance: 40 km (standard) / 60 km, 80 km, 120 km (optional)。
Skylane Optics 光纤收发器产品手册说明书
PUBLIC_REV2017_AProduct GuideTransceivers for Datacom and TelecomApplicationsData CenterOptimized fiber optic solution for Data Center Application FTTHBroad Product Portfoloio and Technology for FTTH Broadband Networks WirelessEnabling Rapid Expnsion of Mobile Broadband Enterprise - CampusWe provides the enterprise network market with the most comprehensive product combinationsSkylane Optics is a leading provider of transceivers for optical communication. We offer an extensive portfolio for the enterprise, access, and metropolitan fiber optical market.The offerings provided by Skylane Optics are characterized by high quality and performance. In combination with our strong technical support, we enable our customers to build cost optimized network solutions solving existing and future capacity needs.SolutionsOur Engineering and Logistics Center> Inventory, logistics, programming and quality control based in Fraire, Belgium> IQC [Incoming Quality Control] and OQC [Outgoing Quality Control]> 100% optimized for handling of transceivers > SD [ANSI/ESD S20.20] compliant > Clean room environment; class 100K > Traceability> High CapacityOur Laboratory> Lab, based in Fraire, Belgium > Technical support > RMA handling> Qualification tests:- Measure performance over the temperaturerange to verify compliance with standards - Compliance with standards (IEEE, IEC, MSA)- Power consumption - Eye diagram - Sensitivity- WavelengthQualityCompatibilityAdva Agilent Alcatel - Nokia Allied Telesis Apac Opto AristaArborAruba Networks AsgaAvaya – Nortel BlackMagic Broadcom BrocadeBTI System BullCalix Carelink CienaCiscoCitrixCOE Commscope Coriant Corrigent CPECyanD-Link datacomDellDNWPECIEdge-Core Enterasys EricssonEricsson RedbackExtremeFibrolanForce10Fortigate (Fortinet)GeneexisGigamonHirschmanHPHP - ProcurveHP - H3CHP - BladeSystemHP - SANHP - ServerHSEHuaweiIBMID QuanticInfineraIntelIXIAJDSUWavereadyJuniperKeymileKTILANCOMLinksysLynxMellanoxMerakiMicrosensMikrotikMoxaMRVLynxMarconiMikrotikMyricomNECNetgearNexansOptowayOrckitPacketfrontPacketlightPalo AltoPica8Procera NetworksQlogicRADRadwareRiverstoneSorentoTellabsTP-LinktrendnetTransition NetworksUnifi - SwitchVSSWestermoWTDZhoneZTEZyxelHIGHLY COMPATIBLE : MAKE YOUR TRANSCEIVER COMPATIBLE FOR ALL MAJOR PLATFORM.WhySkylane Optics ?CustomizationDue to our high experienced engineers, we are enable to modify the hardware and software of the transceivers. We are also able to produce transceivers with withelabelling.Technical SupportHighly experienced Skylane Optics engi -neers will visit your facility to solve your issues.Quality & AssuranceWe have cutting-edge test equipment to ensure we supply high quality products.Mutli CompatibilitySkylane Optics offers the most cost-effec -tive solutions for all major platforms withthe proprietary firmware.Innovations for Early AdoptersThe manufacturing environment is strictly compliant to most avanced standard, whichensure long term reliability.Skylane Optics transceivers are certified by TUV.> E N 60950-1:2006 ITE, Safety, General require -ments > EN 60825-1:2007 Safety of laser products > EN 60825-2:2004 Safety of Optical Fiber Com -munication SystemsSkylane Optics transceivers are CE and ROHS compliant.Skylane Optics transceivers are certified by ULCertificationsT R A N S C E I V E R ST R A N S C E I V E R S P O NC A B L E SC OD I N G B O XP A S S I V E S(V i s i b i l e o n o u r w e b s i t e )Q S F P28100GBase-SR4Q2885P10C0PF103 Gb/s Multi Mode850nm 100m0°C to 70°C 100GBase-SR4/OTU4Q2885P10C1PF112 Gb/s Multi Mode850nm100m0°C to 70°C 100GBase-eSR4Q2885P30C0PF103 Gb/s Multi Mode850nm300m0°C to 70°C 100GBase-eSR4/OTU4Q2885P30C1PF112 Gb/s Multi Mode850nm300m0°C to 70°C 100GBase-PSM4Q2813P50C0PD103 Gb/s Single Mode1310nm500m0°C to 70°C100GBase-CWDM4Q28QL002C00F103 Gb/s Single Mode1270/1290/1310/1330nm2km 0°C to 70°C 100GBase-CLR4Q28QL002C00D103 Gb/s Single Mode1270/1290/1310/1330nm 2km 0°C to 70°C 100GBase-LR4Q28QD010C00D103 Gb/s Single Mode LAN-WDM 800GHz10km 0°C to 70°C 100GBase-LR4/OTU4Q28QD010C10D112 Gbps Single Mode LAN-WDM 800GHz10km 0°C to 70°C 100GBase-ER4 Lite Q28QD040C00F103 Gb/s Single Mode LAN-WDM 800GHz40km 0°C to 70°C 100GBase-ER4/OTU4 Lite Q28QD040C10F112 Gbps Single Mode LAN-WDM 800GHz40km 0°C to 70°CC F P4100GBase-LR4CF4QD010C00D103 Gb/s Single Mode LAN-WDM 800GH z10km0°C to 70°C 100GBase-LR4/OTU4CF4QD010C10D112 Gbps Single Mode LAN-WDM 800GH z10km 0°C to 70°C 100GBase-ER4 Lite CF4QD040C00F103 Gb/s Single Mode LAN-WDM 800GH z40km0°C to 70°C 100GBase-ER4/OTU4 Lite CF4QD040C10F112 Gbps Single Mode LAN-WDM 800GH z40km 0°C to 70°CC F P2100GBase-LR4CF2QD010C00D103 Gb/s Single Mode LAN-WDM 800GH z10km0°C to 70°C 100GBase-LR4/OTU4CF2QD010C10D112 Gbps Single Mode LAN-WDM 800GH z10km 0°C to 70°C 100GBase-ER4CF2QD040C00D103 Gb/s Single Mode LAN-WDM 800GH z40km0°C to 70°C 100GBase-ER4/OTU4CF2QD040C10D112 Gbps Single Mode LAN-WDM 800GH z40km 0°C to 70°CC F P100GBase-LR4CFPQD010C00D103 Gb/s Single Mode LAN-WDM 800GH z10km0°C to 70°C 100GBase-LR4 OTU4CFPQD010C10D112 Gbps Single Mode LAN-WDM 800GH z10km 0°C to 70°C 100GBase-ER4CFPQD040C00D 103 Gb/s Single Mode LAN-WDM 800GH z40km0°C to 70°C 100GBase-ER4/OTU4CFPQD040C10D112 Gbps Single Mode LAN-WDM 800GH z40km 0°C to 70°CQ S F P+40GBase-SR4QFP85xxx40PD 40 Gb/s Multi Mode850nm 100/300m0°C to 70°C 40GBase-PSM4 IR4 QFP13C1440PD40 Gb/s Single Mode1310nm1,4km0°C to 70°C 40GBase-PSM4 LR4QFP1301040PD40 Gb/s Single Mode1310nm10km 0°C to 70°C40GBase-IR4QFPQLC1400D40 Gb/s Single Mode1270/1290/1310/1330nm1,4km 0°C to 70°C 40GBase-LX4QFPQL002400U40 Gb/s Single/Multi Mode1270/1290/1310/1330nm2km 0°C to 70°C 40GBase-LR4QFPQL010400D40 Gb/s Single Mode1270/1290/1310/1330nm 10km 0°C to 70°C 40GBase-ER4QFPQL040400D40 Gb/s Single Mode1270/1290/1310/1330nm40km 0°C to 70°CS F P2825GBase-SR S2885P10250F25 Gb/s Multi Mode850nm100m-40°C to 85°C 25GBase-LR S2813010250D25 Gb/s Single Mode1310nm10km-40°C to 85°C 25GBase-ER S2813040250F25 Gb/s Multi Mode1310nm40km0°C to 70°C25GBase-CWDM S2CXX010250D25 Gb/s Single Mode CWDM ITU ch. 10km-20°C to 85°CX F P10GBase-SR XFP85P3010xD10.3 Gb/s Multi Mode850nm 300m -40°C to 85°C 10GBase-LR XFP1301010xD10.3 Gb/s Single Mode1310nm 10km -40°C to 85°C 10GBase-LR/OC-192XFP130100HxD11.35 Gb/s Single Mode1310nm 10km -40°C to 85°C 10GBase-LR XFP1302010xD10.3 Gb/s Single Mode1310nm 20km -40°C to 85°C 10GBase-ER XFP1504010xD10.3 Gb/s Single Mode1550nm 40km -40°C to 85°C 10GBase-ER/OC-192XFP150400HxD11.35 Gb/s Single Mode1550nm 40km -40°C to 85°C 10GBase-ZR XFP1508010xD10.3 Gb/s Single Mode1550nm 80km -40°C to 85°C 10GBase-ZR/OC-192XFP150800HxD11.35 Gb/s Single Mode1550nm 80km -40°C to 85°C10GBase-CWDM XFCxxB1010xD10.3 Gb/s Single Mode CWDM ITU ch. 10dB -40°C to 85°C 10GBase-CWDM XFCxx04010xD10.3 Gb/s Single Mode CWDM ITU ch. 14dB/40km -40°C to 85°C 10GBase-CWDM XFCxx07010xD10.3 Gb/s Single Mode CWDM ITU ch. 23dB/70km -40°C to 85°C10GBase-DWDM XFDxx04010xD10.3 Gb/s Single Mode DWDM ITU ch. 14dB/40km -40°C to 85°C 10GBase-DWDM/OC-192XFDxx0400HxD11.35 Gb/s Single Mode DWDM ITU ch. 14dB/40km -40°C to 85°C 10GBase-DWDM XFDxx08010xD10.3 Gb/s Single Mode DWDM ITU ch. 23dB/80km -40°C to 85°C 10GBase-DWDM OC-192XFDxx0800HxD11.35 Gb/s Single Mode DWDM ITU ch. 23dB/80km -40°C to 85°C10GBase-Tunable XFDTU0800H0D11.35 Gb/s Single Mode50GHz DWDM tun 23dB/80km0°C to 70°C10GBase-Bidi XFB23xxx10xD10.3 Gb/s Single Mode1270/1330nm 10/20/40/60km-40°C to 85°C 10GBase-Bidi XFB32xxx10xD10.3 Gb/s Single Mode1330/1270nm10/20/40/60km-40°C to 85°CX2X2X2S00000100D 10.3 Gb/s n/a n/a n/a0°C to 70°C X E N P A KXenpak XPS00000100D 10.3 Gb/s n/a n/a n/a0°C to 70°CS F P+16x Fiber Channel SW SPP85P10160C14.025 Gb/s Multi Mode850nm100m0°C to 70°C 16x Fiber Channel LW SPP13010160C14.025 Gb/s Single Mode1310nm10km0°C to 70°C 6G CPRI SR SPP85P30L6xD 6.144 Gb/s Multi Mode850nm300m-20°C to 85°C 6G CPRI LR SPP13002L6xD 6.144 Gb/s Single Mode1310nm2km-40°C to 85°C 6G CPRI LR SPP13010L62D 6.144 Gb/s Single Mode1310nm10km-40°C to 85°C 10GBase-SR SPP85P3010xD10.3 Gb/s Multi Mode850nm300m-40°C to 85°C 10GBase-LRM SPP13P2210xA10.3 Gb/s Multi Mode1310nm220m-40°C to 85°C 10GBase-LR SPP13xxx10xD10.3 Gb/s Single Mode1310nm10/20km-40°C to 85°C 10GBase-ER SPP1504010xD10.3 Gb/s Single Mode1550nm40km-40°C to 85°C 10GBase-ZR SPP1508010xD10.3 Gb/s Single Mode1550nm80km-40°C to 85°C 10GBase-ZR100SPP15100100D10.3 Gb/s Single Mode1550nm100km0°C to 70°C10GBase-CWDM SPCxxB1010xD10.3 Gb/s Single Mode CWDM ITU ch. 10dB-40°C to 85°C 10GBase-CWDM SPCxx04010xD10.3 Gb/s Single Mode CWDM ITU ch.14dB/40km-40°C to 85°C 10GBase-CWDM SPCxx07010xD10.3 Gb/s Single Mode CWDM ITU ch.23dB/70km-40°C to 85°C6G CPRI CWDM SBHxDxxxL62D 6.144 Gb/s Single Mode CWDM ITU ch.10dB/18dB-40°C to 85°C 6G CPRI CWDM SBHxUxxxL62D 6.144 Gb/s Single Mode CWDM ITU ch.10dB/18dB-40°C to 85°C10GBase-DWDM SPDxx04010xD10.3 Gb/s Single Mode DWDM ITU ch. 14dB/40km -40°C to 85°C 10GBase-DWDM SPDxx08010xD10.3 Gb/s Single Mode DWDM ITU ch.23dB/80km-40°C to 85°C10GBase-Tunable SPDTU08010xD11.35 Gb/s Single Mode50GHz DWDM tun23dB/80km-40°C to 85°C10GBase-Bidi SPB23xxx10xD10.3 Gb/s Single Mode1270/1330nm 10/20/40/60km-40°C to 85°C 10GBase-Bidi SPB32xxx10xD10.3 Gb/s Single Mode1330/1270nm10/20/40/60km-40°C to 85°C 10GBase-Bidi SPB45080100D10.3 Gb/s Single Mode1490/1550nm80km0°C to 70°C 10GBase-Bidi SPB54080100D10.3 Gb/s Single Mode1550/1490nm80km0°C to 70°C10GBase-T SPT00M30100010.3 Gb/s Copper n/a30m0°C to 70°CS F P100Base-LX SF P13xxxFExD125 Mb/s Single Mode1310nm2/10/20/30/40/60km-40°C to 85°C 100Base-LX SGMII SGP13xxxFExD125 Mb/s Single/Multi Mode1310nm2/10km -40°C to 85°C 100Base-ZX SFP15080FExD125 Mb/s Single Mode1550nm 80km -40°C to 85°C 1000Base-SX SFP85P55GExD 1.25 Gb/s Dual Fibre-MM850nm 550m -40°C to 85°C 1000Base-LX SFP13001GExD 1.25 Gb/s Dual Fibre-MM1310nm 2km -40°C to 85°C 1000Base-LX40SFP13xxxGExD 1.25 Gb/s Single Mode1310nm 10/20km -40°C to 85°C 1000Base-EX SFP13040GExD 1.25 Gb/s Single Mode1310nm 40km -40°C to 85°C 1000Base-ZX SFP15xxxGExD 1.25 Gb/s Single Mode1550nm 60/80/120km -40°C to 85°C 0C-48 Multi Rate SX SFP13002PAxD 2.67 Gb/s Single Mode1310nm 2km -40°C to 85°C 0C-48 Multi Rate LX SFP13020PAxD 2.67 Gb/s Single Mode1310nm 20km -40°C to 85°C OC-48 Multi Rate LX40SFP13040PAxD 2.67 Gb/s Single Mode1310nm 40km -40°C to 85°C 0C-48 Multi Rate EX SFP15040PAxD 2.67 Gb/s Single Mode1550nm 40km -40°C to 85°C 0C-48 Multi Rate ZX SFP15080PAxD 2.67 Gb/s Single Mode1550nm 80km -40°C to 85°C 3G CPRI Base-SX SFP85P30L31D 3.072 Gb/s Multi Mode850nm300m-20°C to 85°C 3G CPRI SX SFP13002L32D 3.072 Gb/s Single Mode1310nm2km-40°C to 85°C 3G CPRI LX SFP13010L32D 3.072 Gb/s Single Mode1310nm10km-40°C to 85°C1000Base-CWDM SFCxx040GE0D 1.25 Gb/s Single Mode CWDM ITU ch. 16dB/40km 0°C to 70°C 1000Base-CWDM SFCxx080GE0D 1.25 Gb/s Single Mode CWDM ITU ch. 24dB/80km 0°C to 70°C 1000Base-CWDM SFCxx120GE0D 1.25 Gb/s Single Mode CWDM ITU ch. 32dB/120km 0°C to 70°C 1000Base-CWDM SFCxx160GE0D 1.25 Gb/s Single Mode CWDM ITU ch. 40dB/160km 0°C to 70°C 4x Fiber Channel-CWDM SFCxx0404F0D 4.25Gb/s Single Mode CWDM ITU ch. 16dB/40km0°C to 70°C 4x Fiber Channel-CWDM SFCxx0804F0D 4.25Gb/s Single Mode CWDM ITU ch. 24dB/80km0°C to 70°C OC-48 Multi Rate CWDM SFCxx040PAxD 2.67Gb/s Single Mode CWDM ITU ch. 16dB/40km-20°c to 85°C OC-48 Multi Rate CWDM SFCxx080PAxD 2.67Gb/s Single Mode CWDM ITU ch. 24dB/80km-20°c to 85°C3G CPRI Bidi CWDM SBHxDB22L32D 3.072 Gb/s Single Mode CWDM ITU ch. 22dB-40°C to 85°C 3G CPRI Bidi CWDM SBHxUB22L32D 3.072 Gb/s Single Mode CWDM ITU ch. 22dB-40°C to 85°C1000Base-DWDM SFDxxyyyGE0D 1.25 Gb/s Single Mode DWDM ITU ch. 80/100/120km0°C to 70°C1000BASE-T SFT00P10GE0x 1.25 Gb/s Copper n/a100m 0°C to 70°C 1000BASE-T SGT00P10DR0x 1.25 Gb/s Copper n/a100m 0°C to 70°C1000Base-BXD SBD53xxxFExD125 Mb/s Single Mode1550/1310nm 10/20/40/60km -40°C to 85°C 1000Base-BXU SBU35xxxFExD125 Mb/s Single Mode1310/1550nm 10/20/40/60km -40°C to 85°C 1000Base-BXD SGMII SGD53010FExD125 Mb/s Single Mode1550/1310nm 10km -40°C to 85°C 1000Base-BXU SGMII SGU35010FExD125 Mb/s Single Mode1310/1550nm 10km -40°C to 85°C 1000Base-BXD SBD53xxxGExD 1.25 Gb/s Single Mode1550/1310nm 3/10/20/40/60km -40°C to 85°C 1000Base-BXU SBU35xxxGExD 1.25 Gb/s Single Mode1310/1550nm 3/10/20/40/60km -40°C to 85°C 1000Base-BXD SBD43xxxGExD 1.25 Gb/s Single Mode1490/1310nm 10/20/40/60km -40°C to 85°C 1000Base-BXU SBU34xxxGExD 1.25 Gb/s Single Mode1310/1490nm 10/20/40/60km -40°C to 85°C 1000Base-BXD SBD43xxxDRxD 1.25 Gb/s Single Mode1490/1310nm 10/20km -40°C to 85°C 1000Base-BXU SBU34xxxDRxD 1.25 Gb/s Single Mode1310/1490nm 10/20km -40°C to 85°C 1000Base-BXD SBD53xxxDRxD 1.25 Gb/s Single Mode1550/1310nm 10/20km -40°C to 85°C 1000Base-BXU SBU35xxxDRxD 1.25 Gb/s Single Mode1310/1550nm 10/20km -40°C to 85°C1000Base-BXD CSFP SCD53xxxDRxD 1.25 Gb/s Single Mode1550/1310nm 10/20km 0°C to 70°C 1000Base-BXD CSFP SCD53xxxGExD 1.25 Gb/s Single Mode1550/1310nm 10/20km 0°C to 70°C 1000Base-BXD CSFP SCD43xxxGExD 1.25 Gb/s Single Mode1490/1310nm 10/20/40km0°C to 70°CTransceivers PONGPON OLT B+SBM43CBPDGxD 2,488 Mbps 1,244 Mbps Bidi SFP 1490/1310nm DFB APD B+ -40°C to 85°C SC GPON OLT C+SBM43CCPDGxD 2,488 Mbps 1,244 Mbps Bidi SFP 1490/1310nm DFB APD C+ -40°C to 85°C SC GPON OLT C++SBM43CCCDG3D2,488 Mbps1,244 MbpsBidi SFP1490/1310nmDFBAPDC++0°C to 70°CSCXGSPON OLTXSM52CN1NN3D9,953 Mbps9,953 MbpsBidi XFP1577/1270nmEMLAPDN10°C to 70°CSCXGSPON OLT SSM52CN1NN3D 9,953 Mbps 9,953 Mbps Bidi SFP+1577/1270nm EML APD N10°C to 70°C SC XGSPON ONUSSN25CN1XXxD10,3125 Mbps10,3125 MbpsBidi SFP+1270/1577nmEMLAPDN1-40°C to 85°CSC10GEPON OLTSPH53C30XR3D 10,3125 Mbps 1,25 Mbps Bidi SFP+1577/1310nm EML APD PRX300°C to 70°C SC 10GEPON ONUSPI25C30PR3D 10,3125 Mbps 10,3125 Mbps Bidi SFP+1270/1577nm EML APD PR300°C to 70°C SC SPI35C30RX3D 1,25 Mbps 10,3125 Mbps Bidi SFP+1310/1577nm DFB APD PRX300°C to 70°C SC XGPON1 OLT SPF52CN1ND3D 9,953 Mbps 2,488 Mbps Bidi SFP+1577/1270nm EML APD N10°C to 70°C SC XGPON1 ONUSPG25CN1DNxD2,488 Mbps9,953 MbpsBidi SFP+1270/1577nmDFBAPDN1-40°C to 85°CSC10GEPON OLT XBO52C30PR3D 10,3125 Mbps 10,3125 Mbps Bidi XFP 1577/1270nm EML APD PR300°C to 70°C SC XGPON1 OLTXBM52CN1ND3D9,953 Mbps2,488 MbpsBidi XFP1577/1270nmEMLAPDN10°C to 70°CSCX F PS F PS F P +A L L P R O D U C T S A R E D D MQ S F P 28Q S F P +100GBase-T DAPQQMxxC000QSFP28 to QSFP28103 Gb/s n/a n/a n/a 50cm/1/2/3m 100xGigabit Ethernet 0°C to 70°C 1100GBase-T Breakout CableDAPQSMxxC000QSFP28 to 4x SFP28103 Gb/sn/an/an/a50cm/1/2/3m25x/100x Gigabit Ethernet0°C to 70°C1,2100GBase DAOQQMxxC00D QSFP28 to QSFP28103 Gb/s 850nm 4x VCSEL 4xPIN 1/3/5/10/15/30/50/75/100m 100xGigabit Ethernet 0°C to 70°C 1100GBaseBreakout CableDAOQSMxxC00DQSFP28 to 4x SFP28103 Gb/s850nm4x VCSEL4xPIN50cm/1/2/3m25x/100x Gigabit Ethernet0°C to 70°C1,240GBase-T (passive)DAPQQxxx4000QSFP+ to QSFP+40 Gb/s n/a n/a n/a 50cm/1/2/3/4/5m 40xGigabit Ethernet 0°C to 70°C 140GBase-T Breakout DAPQSxxx4000QSFP+ to 4x SFP+40 Gb/s n/a n/a n/a 50cm/1/2/3/4/5m10x/40x Gigabit Ethernet 0°C to 70°C 1,240GBase-T (active)DAAQQMxx4000QSFP+ to QSFP+40 Gb/sn/an/an/a7/10m40xGigabit Ethernet0°C to 70°C140GBase DAOQQxxx400D QSFP+ to QSFP+40 Gb/s 850nm 4x VCSEL 4xPIN 3/5/10/30/50/100m 40xGigabit Ethernet 0°C to 70°C 140GBaseBreakout CableDAOQSMxx400DQSFP+ to 4x SFP+40 Gb/s850nm4x VCSEL4xPIN3/5/10/30/50/100m10x/40x Gigabit Ethernet0°C to 70°C1,21 M x x & x x x I N P A R T N U M B E R I N D I C A T E S C A B L E L E N G T H.2 B R E A K O U T C A B L E.25GBaseDAOSSMxx250DSFP28 to SFP2825 Gb/s850nmVCSELPIN1/2/3/5/10/20/30/50/100m25xGigabit Ethernet0°C to 70°C1S F P 28S F P +25GBase-TDAPSSMxx2500SFP28 to SFP2825 Gb/sn/an/an/a50cm/1/2/3/5m25xGigabit Ethernet0°C to 70°C110GBaseDAOSSxxx100DSFP+ to SFP+10.3 Gb/s850nmVCSELPIN1/3/5/7/10/15/20/30/50/100m10x Gigabit Ethernet 10x Fibre Channel0°C to 70°C110GBase-T (passive)DAPSSMxx1000SFP+ to SFP+10.3 Gb/s n/a n/a n/a 50cm/1/2/3/5/7m 10x Gigabit Ethernet 10x Fibre Channel 0°C to 70°C 110GBase-T (active)DAASSxxx1000SFP+ to SFP+10.3 Gb/sn/an/an/a1/2/3/5/7/10m10x Gigabit Ethernet 10x Fibre Channel0°C to 70°C11 M x x & x x x I N P A R T N U M B E R I N D I C A T E S C A B L E L E N G T H.2 B R E A K O U T C A B L E.Coding BoxThe SkyBox is a solution, provided and managed by Skylane Optics , enabling our customer to program Skylane Optics transceivers by themselves.Customers can now easily make SFP/ SFP+/ SFP28 / CSFP , XFP , QSFP+/ QSFP28 and XFP transceivers compatible with equipment from a large number of vendors (Cisco, Juniper, HP , …).The wavelength of Skylane tunable transceivers can also be set to the desired value using SkyBox . To allow use of SkyBox in any situation, the box comes with a battery.By the way, you never know where you must reprogram and install your transceivers!As the world is getting more and more connected the SkyBox comes with a mobile and desktop applica -tion compatible with android ® and Mac OS ®.With this toolbox, you are able to code your transceivers but also to see the history of all your previous coding activities.Furthermore, other options can be added such as OTDR, Power Meter, VOA, Wavelength meter.There is no other brand offering a battery-powered coding box.The SkyBox is a real partner for you engineers on the field. With SkyBox, you do not need to code your transceiver before leaving the office. You can do everything on the field.M ain benefitsUser Friendly The SkyBox is provided with a mobile and desktop application.Cost-effective Solution Less part numbers needed and stock management/logistics will be simplified.H ighly CompatibleMake your transceiver compatible for all major platform.ContactP20PRODUCT GUIDE B E L G I U MR u e d u M o u l i n , 18B -5650 F r a i r e B e l g i u mT. +32 71 610 640F. +32 71 610 649E. i n f o @s k y l a n e o p t i c s.c o m R u a U m b u 286 - 1º p a v i m e n t o A l p h a v i l l e C a m p i n a s E m p r e s a r i a l C E P 13.098-325 C a m p i n a s S ão P a u l o - B r a s i l T.+55 (19) 3514-6000E. i n f o @s k y l a n e o p t i c s.c o m V i k d a l s g r än d , 10A 13140 N a c k a S w e d e n E. i n f o @s k y l a n e o p t i c s.c o m B R A Z I L S W E D E N U S A (C O M I N G S O O N )F O L L O W U S O N :Tw i t t e r | L i n k e d I nO U R O F F I C E S A R O U N D T H E W O R L D。
8光1电 8路百兆SFP光口转1路千兆以太网电口 光纤收发器厂家说明书
本系列产品是以太网IEEE802.3介质转换器，能够实现10/100/1000Base-T双绞线与100Base-FX 光纤介质之间的转换或延伸网络传输，主要用于光纤网络远距离（20/40/60/80/120公里）传输。
此款产品提供8路百兆SFP光口（拥有汇聚功能）；1路千兆以太网电口。
具备完善的告警功能，整机工作稳定可靠，功耗低，集成度高，体积小。
➢电口自动适应10/100/1000Mbps环境，便于网络的升级；➢设备提供 1路千兆以太网电口，8路百兆SFP光口；➢支持全双工和半双工网络通信，带有自动协商能力；➢支持VLAN超长数据包的传输，可以与支持IEEE802.10协议的交换机产品匹配使用，支持最大为1632字节的以太包；➢支持双绞线口交叉连接自适应，方便系统调试安装；➢两个光口支持上连与下连，多台设备可以组成级联型以太网网络；➢以太网电口带防雷保护，防雷达到GB/T17626.5(IEC61000-4-5) 短路电流波8/20μs，开路峰值输出电压6KV标准；◆光纤部分多模光纤:50/125um 或 62.5/125um，传输距离： 2Km 多模光纤，衰减(3dbm/km )波长: 850nm发射功率: -12dBm (Min) ～ -9dBm (Max)接收灵敏度: -28dBm (Min)链路预算: 16dBm单模光纤:8/125um 或 9/125um,传输距离： 20Km 单模光纤，衰减(0.35dbm/km ) (实际如需更大距离需定制)波长: 1310nm（超长距离传输时选用1550nm波长）发射功率: -9dBm (Min) ～-5dBm (Max)接收灵敏度: -27dBm (Min)链路预算: 18dBm◆以太网接口协议：符合IEEE 802.3，IEEE 802.1Q(VLAN)速率：10/100/1000M自适应，全/半双工完全自适应MAC地址表：可以学习4096个MAC地址物理接口：RJ45座, 支持Auto-MDIX（交叉/直通线自适应）◆电气和机械特性系统电源： AC180V ～260V功耗：≤5W外观结构: (长×宽×高) 216*138*31mm 桌面式◆环境指标工作温度：-10℃—+70℃或-40℃—+85℃（工业级）储存温度：-40℃—+85℃工作湿度：0%—95%（无凝结）MTBF：＞100,000小时产品型号FC8M-G1（汇聚型）产品功能描述8路百兆SFP光口转1*10/100/1000M以太网电口，可与单口收发器连接，拥用汇聚功能，8个光方向，中继链路组网，应用灵活，桌面式，内置电源业务端口描述8个百兆SFP光口，1个千兆以太网电口电源AC220V或DC-48V（电源可选）产品尺寸(长×宽×高) 216*138*31mm 桌面式重量 1.1Kg/台飞畅科技专注光纤通信研发、生产、销售20年，为客户提供个性化技术服务与定制解决方案。
以太网光纤收发器手册
图十
如图所示，具体的功能有： 光口和电口链路状况； 电口速率控制； 全/半双工控制； 自协商（auto-negotiation）控制； LFP（Link Fault Pass through）链路容错控制； 流量（Flow-Control）控制；
-18-
快速以太网光纤收发器(可网管)用户手册 f）、点击图九最右边的网管卡，进入如下页面。在该页面中， 可查看和配置网管模块的 IP 地址，掩码和网关。
-12-
快速以太网光纤收发器(可网管)用户手册 （http://192.168.0.100） 地址，连接成功后，便即可进入网 管页面（默认用户名为“admin”，密码为“12345”，注意大 小写）。
快速以太网光纤收发器(可网管)用户手册
图五 a）、在身份验证正确后，进入如下的页面。在这里可以查看和 修改用户名，密码，也可以查看和修改收发器相关信息。
一、概述 光纤收发器(Fiber Converter)是一种区域网络连接器设备，
作为光电转换器件，把电信号转化为光信号在单模或多模光纤上 传输，突破了电缆传输距离短的限制，使得以太网在保证高带宽 传输的前提下，利用光纤介质实现几公里甚至上百公里的远距离 传输。使用光纤收发器构造网络能够节省网络投资（见应用示意 图）。使用光纤收发器是现在在网络设备光口价格昂贵的情况下， 一种符合网络现状的良好的远距离传输解决方案。
TX
UTP
HUB
光纤收发器
光纤
UTP
光纤收发器
SWITCH
RX
光纤
光纤收发器连接示意图
图三 2、 用直通双绞线连接收发器卡的 RJ45 口和电脑、集线器或交
换机。用直通双绞线连接网管板的 RJ45 口与电脑，可通过 WEB 网管；网管板的 RS232 口与电脑串口用随机附带的交 叉串口电缆连接。用交叉双绞线与直通双绞线的连接方式 以及网络接口的引脚信号分配规则参见附录一。 3、 光纤接口的连接必须注意单模、多模匹配。一端收发器的 发射口（TX）连接另一端收发器的接收口（RX）。光纤接口 的主要类型为 SC 或 ST 等。 适用光缆：
以太网光纤收发器 以太网光纤收发器机架 说明书
以太网光纤收发器 以太网光纤收发器机架 说明书(使用前先阅本说明书) 简介:感谢您购买千兆光纤收发器！该千兆光纤收发器支持IEEE802.3Z/AB 1000Base-SX/LX协议，支持全双工或半双工工作模式,自适应直通线与交叉线功能。
本手册适用于1000 Base-T 自适应各型号的光纤收发器，请用户购买时按需要参照以下订购指南选购。
光纤收发器订购指南:型号 规格说明NT-2100 1000M，多模500米NT-2100S-10 1000M，单模0-10公里NT-2100S-20 1000M，单模0-20公里NT-2100S-50 1000M，单模0-50公里NT-2100S-80 1000M，单模0-80公里NT-2100F 卡式铝合金外壳1000M,多模500米NT-2100F-10 卡式铝合金外壳1000M,单模0-10公里NT-2100F-20 卡式铝合金外壳1000M，单模0-20公里NT-2100F-50 卡式铝合金外壳1000M，单模0-50公里NT-2100F-80 卡式铝合金外壳1000M，单模0-80公里NT-2100P 卡式1000M，多模500米NT-2100P-10 卡式1000M,单模0-10公里NT-2100P-20 卡式1000M,单模0-20公里NT-2100P-50 卡式1000M,单模0-50公里NT-2100P-80 卡式1000M,单模0-80公里NT-S2100-10 单纤双向1000M，单模0-10公里NT-S2100-20 单纤双向1000M，单模0-20公里NT-S2100-40 单纤双向1000M，单模0-40公里NT-S2100P10 卡式单纤双向1000M,单模0-10公里NT-S2100P20 卡式单纤双向1000M,单模0-20公里NT-S2100P50 卡式单纤双向1000M,单模0-50公里包装清单在安装收发器前，请确认包装内是否有以下物品。
光纤收发器HTB-1100指示灯定义
ห้องสมุดไป่ตู้FDX：灯亮表示光纤以全双工方式传输数据
TX 100：灯亮表示双绞线传输速率为100Mbps
TX Link/Act：灯长亮表示双绞线链路连接确；
灯闪亮表示双绞线中有数据在传输
LED 指示灯
光纤收发器有6 个LED 指示灯，它们显示了收
发器的工作状态，根据LED所示，就能判断出收发
器是否工作正常和可能有什么问题，从而能帮助找
出故障。它们的作用分别如下所述：
PWR：灯亮表示DC5V 电源工作正常
FX 100：灯亮表示光纤传输速率为100Mbps
FX Link/Act：灯长亮表示光纤链路连接正确；
百兆紧凑型工业光电转换器光纤收发器使用说明书
百兆紧凑型工业光电转换器光纤收发器说明书【概述】百兆紧凑型工业光电转换器采用高强度IP40防护外壳，工业级设计，支持Auto-Negotiation自适应技术，提供全面的LED状态指示，支持电压12~48V DC电源输入，以增加通讯网络的可靠度。
紧凑型光纤收发器提供1~2个10/100Base-T(X) RJ45电口和1个100Base-FX 光口（可选FC、ST），可以根据业务口需求灵活的进行光电组合。
工业光电转换器基于工业安装需求，提供35mm导轨或壁挂式这两种安装模式。
光纤收发器采用业内优秀的网络方案，-40~85℃工作温度范围，能够满足各种工业现场的要求，提供便捷的以太网通讯解决方案。
【性能特点】符合IEEE802.3/802.3u标准，存储转发交换方式提供1~2个10/100Base-T(X) RJ45以太网接口，支持Auto-Negotiation技术，自动协商工作速率（10M/100M）和双工模式（半双工/全双工），端口自适应提供1个100Base-FX光口，默认SC接口，可选FC、ST，可传输120公里采用高强度IP40外壳及工业级设计支持电压12~48V DC电源输入-40~85℃工作温度范围【详细规格】技术标准：IEEE802.3、IEEE802.3u接口RJ45电口：10/100Base-T（X）速率自侦测、全/半双工模式，端口自适应百兆光口：100Base-FX百兆全双工，默认SC接口，可选FC、ST，可传输120公里交换属性十兆转发速度：14881pps百兆转发速度：148810pps传输方式：存储转发系统交换带宽：800Mbps缓存大小：448KbitsMAC地址表：1K电源12~48V DC电源输入，典型工作电压12V/24V/48V，采用3芯7.62mm间距标准工业端子空载功率：1.92W@24VDC满载功率：2.16W@24VDC机械特性尺寸（W×H×D）：32mm×103mm×83mm净重：200克外壳：IP40等级保护，金属外壳安装：壁挂式或DIN导轨式安装工作环境工作温度：-40℃~85℃存储温度：-40℃~85℃相对湿度：5%~95%（无凝露）保修保修期：5年【符合标准】IEC61000-4-2(ESD)：±6KV接触放电，±15KV空气放电IEC61000-4-3(RS)：10V/M(80-1000MHZ)IEC61000-4-4(EFT)：电源端：±4KV，信号端：±2KVIEC61000-4-5(Surge)：电源端：±2KV CM/±1KV DM，信号端：±4KVIEC61000-4-6(射频传导)：3V(10KHZ-150KHZ)，10V(150KHZ-80MHZ)IEC61000-4-16(共模传导)：30V COUNT 300V，1SIEC60068-2-6(振动)IEC60068-2-27(冲击)IEC60068-2-32(自由跌落)IEC61000-6-2(通用工业标准)【系列清单】【产品外观】Ck1011 Ck1021 【LED 指示灯】【接地和电源连接】设备接地：转换器上侧板出有一接地螺丝，此点连接接地线的一端，另一端需可靠接入机房的大地。
Omate1100N光纤收发器使用说明书
6-13
User Manual
Chapter 2 Installation 第二章 安装说明
图二. 光纤收发器机架
前面板图
图三. 光纤收发器机架后面板图
User Manual
7-13
8-13
User Manual
Chapter 3 Technical Specification
12-13
User Manual
User Manual
14 A 100191 86-10-62304482 51551316/17 15811113156 86-10-62304485 support@
13-13
........................................................................................... 6
................................................................................... 6
Omate1100N 光纤收发器 使用说明书 V1.0
BEIJING OMATE DIGITAL TECHNOLOGY CO., LTD.
Contents
................................................................................... .5
User Manual
9-13
Chapter 4 Modules
（dB） （dB） （km） （dB/km）
10-13
光纤收发器百兆英文说明书
Copyright statementThis publication may not be reproduced as a whole or in part, any way whatsoever unless prior consent has been obtained from us.FCC warningThe media converter have been tested and found to comply with the limits for a Class A digital device ,pursuant to Part 15 of the FCC Rules .These standards are designed to provide reasonable protection against harmful interference when these devices are operated in commercial environment These devices can use ,generate and radiate radio frequency energy and may cause harmful interface to radio communications unless installed in accordance with this User’s Guide .Operation of this device in a residential area is likely to cause harmful interface which will make the user responsible for the appropriate remedial action at his/her own expense.CE mark WarningThese are Class A products. In a domestic environment these products may cause radio interface in which case the user will need to consider adequate preventative measures.Package ContentThank you for purchasing our Ethernet Media Converter. Before you start installing the Media Converter, verify the following items in the packageMedia ConverterUser’s ManualPower AdapterThe Media Converter makes it possible to mix network media to optimize total cost of ownership when you are extending legacy twisted-pair network to a fiber-optic backbone. , It is primarily designed for larger and higher bandwidth demanding workgroups that require expansion of the Ethernet network. The media Converter features a RJ45 jack and an ST/SC/FC fiber optic connectors, connecting the10/100Mbps network to the 100BASE-FX (fiber optic) network. At full duplex mode, the converter can extend distance up to 2 kilometers for Multi-mode fiber and up to 100 kilometers for Single-mode fiber., maximize conversion options and network design flexibilityFeaturesCompliant with IEEE802.3 10Base-T, and IEEE802.3u 100Base-TX/FX standards·Support auto-negotiation function in TP port to detect speed (10/100M) and duplex mode (full/half) automatically·Support auto uplink (auto MDI/MDI-X) in TP port, no more cross-over cable·Extend fiber-optic distance up to 100km with single-mode fiber·Provide various fiber-optic interfaces with ST/SC/FC connectors·Mountable in the converter chassisInstallationAs with any electric device, you should place the equipment where it will not be subject to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements:Please follow the steps to install the media converter. This Converter is a plug-and-play device.1. Turn off the power of the device/station in the network in which the media converter will be installed.2. Ensure that there is no activity in the network.3.Attached fiber cable from the media converter to the fiber network. The fiber connections must be matched—Transmit socket to receive socket4.Attached a UTP cable from the 100Base-Tx network to the RJ-45 port on the5.Connect the power cord to the the media converter and check if the power LED lights up. The TP Link and FX link LEDs will light when all the cable connections are satisfactory.6.Turn on the power of the device/station.10/100TX to 100FX ConverterThis converter provides one TX port and one FX port. For the FX port, it provides options of either multi-mode or single-mode fiber accommodatingST/SC/FC connector. For the TX port, it uses RJ-45 connector supports auto senses the speed of 10/100Mbps.New features support Auto Uplink on TX port and LFPT(Link-Fault-Pass-Through).Auto Uplink: User can connect to PC or switch/hub by using eitherstraight-through or cross-over cable. It will automatically detect the type of cable and link the connection.Link Fault Pass-Through: When cable in one end is OUT(disconnected/damaged/at fault), it will inform the other end by turning OFF the remote end's link LEDs.1.Cable Connection of the media converterPort type Cable Type Max.Length10/100BASE-T Cat.3.4.5 UTP. RJ-45 100 meters100BASE-FX Single-mode Fiber of 1300nm (9 or 10/125µm) 15∽100kmLED IndicationPlease refer to the following table for LED indication of MC-0110 SeriesLED Status IndicationFEF Steady Lit when local FX port receive signal from remote port Off NO receiptionSPD Steady When PT data rtansmission speed is 100M Off When PT data rtansmission speed is 10M Flashing Collision occurredOff Connection in half-duplex modePhysical DescriptionTypical Optical Power Budget。
光纤收发器技术说明
光纤收发器在数据传输上打破了以太网电缆的百米局限性， 依靠高性能的交换芯片和大容量的缓存，在真正实现无阻塞 传输交换性能的同时，还提供了平衡流量、隔离冲突和检测 差错等功能，保证数据传输时的高安全性和稳定性。因此在 很长一段时间内光纤收发器产品仍将是实际网络组建中不可 缺少的一部分，今后的光纤收发器会朝着高智能、高稳定性、 可网管、低成本的方向继续发展。
3．串行接口 接口速率：19200bps 接口标准：RS-232
4．SC/ST接口 ST接口：10Base-F SC接口：100Base-FX
5．USB接口 USB1.1：12Mbps USB2.0：480Mbps
局域网（LAN）的结构主要有三种类型：以太网 （Ethernet）、令牌环（Token Ring）、令牌总线 （Token Bus）以及作为这三种网的骨干网光纤分布数据接 口（FDDI）。它们所遵循的都是IEEE（美国电子电气工程 师协会）制定的以802开头的标准,目前共有11个与局域网 有关的标准,它们分别是：
按结构来分，可以分为桌面式（独立式）光纤收发器和机架 式光纤收发器。
桌面式光纤收发器适合于单个用户使用，如满足楼道中 单台交换机的上联。机架式光纤收发器适用于多用户的汇聚， 如小区的中心机房必须满足小区内所有交换机的上联，使用 机架便于实现对所有模块型光纤收发器的统一管理和统一供 电。
按光纤来分，可以分为多模光纤收发器和单模光纤收发器。 由于使用的光纤不同，收发器所能传输的距离也不一样，
按光纤数量来分，可以分为单纤光纤收发器和双纤光纤收发 器。
顾名思义，单纤设备可以节省一半的光纤，即在一根光 纤上实现数据的接收和发送，在光纤资源紧张的地方十分适 用。这类产品采用了波分复用的技术，使用的波长多为 1310nm和1550nm。但由于单纤收发器产品没有统一国际 标准，因此不同厂商产品在互联互通时可能会存在不兼容的 情况。另外由于使用了波分复用，单纤收发器产品普遍存在 信号衰耗大的特点。目前市面上的光纤收发器多为双纤产品， 此类产品较为成熟和稳定。
光纤收发器使用说明
-3.0dBm
0dBm
< -30dBm
27.0dBm
三. LED指示灯
千 兆 光 纤 收 发 器 有 6个 LED指 示 灯 ， 它 们 显 示 了 收 发 器 的 工 作 状 态 ， 根 据 LED 所 示 ，就 能 判 断 出 收 发 器 是 否 工 作 正 常 和 可 能 有 什 么 问 题 ，从 而 能 帮 助 找 出 故 障 。 它们的作用分别如下所述：
实用文库汇编之100M光纤收发器使用说明
作者：于椅上作品编号：785632589421G 101创作日期：2020年12月20日实用文库汇编之光纤收发器使用指导说明目前万科常用光纤收发器的光纤接口类型为SC接头一正解的接线次序下面先以NETLINK为例讲解二设备介绍左上角——亮时代表1000M速率右上角——亮时代表100M速率左中间——亮时代表已接上尾纤，闪烁代表正在传输数据右中间——亮时代表已接上网线，闪烁代表正在传输数据左下角——亮时代表已接入电源线右下角——亮时代表全双工速率，灭时代表半双工各种情况下指示灯状态。
1单独插电源时2连接网线时3单独连接光纤时4收发器正常工作时三故障讨论1 电源灯不亮，电源故障。
电源DC5V 2A2 Link灯不亮故障可能有以下故障a光纤是否已断；方法：可以用激光笔或是强光手电筒对一头照光，查看另一头是否有可见光。
b光纤线路损耗过大；用工程宝的测光功率计仪表检测。
光纤收发器或光模块在正常情况下的发光功率：单模20公里：－8DB—15DB之间；如果在光纤收发器的发光功率在－30DB――45DB之间，那么可以判断这个收发器有问题。
C 光纤插头是否插反d.跳线类型与设备接口匹配3 网络丢包严重可能故障如下：a收发器的电端口与网络设备接口，或两端设备接口的双工模式不匹配。
b双绞线与RJ-45头有问题。
c光纤连接问题，跳线是否对准设备接口，尾纤与跳线及耦合器不匹配4 时通时断现象a可能为光路衰减太大，此时用光功率计测量接收端的光功率，如果在接收灵敏范围附近1－2DB之内可基本判断为光路故障；b可能是交换故障，把交换机换成PCc 可能为收发器故障，把收发器两端接PC（不通过交换机），两端对PING 没问题后，从一端向另一端传送一个较大文件（100M）以上，观察速度，如果速度慢（200M以下的文件传送15分钟以上），可基本判断为收发器故障。
5 通信一段时间后死机，断电后恢复。
此情况一般是交换机引起，6 收发器RJ45口与其他设备连接时，中间有交换机设备时使用平行双绞线；直接连设备后，使用交叉双绞线；7 Txlink 灯不亮A双绞线接错B 水晶头接触不良C设备没正常连接8 Txlink灯不闪烁却常亮传输距离过长或是直接与PC连接时兼容问题9 指示灯正常但无法传输断电重启作者：于椅上作品编号：785632589421G 101创作日期：2020年12月20日。
光纤收发器HTB1100使用说明
光纤收发器HTB1100使用说明一、产品简介光纤收发器HTB1100是一种高性能的光纤通信设备，用于传输光纤信号，并将其转换为电信号或反之。
它使用先进的技术和优质的材料，具有稳定可靠、传输距离远等特点。
本文将详细介绍光纤收发器HTB1100的使用方法与注意事项。
二、产品安装1. 确认光纤收发器HTB1100的型号及规格是否与实际需求匹配。
2. 将光纤收发器安装在干燥通风的场所，避免阳光直射。
3. 确保接入电源的稳定，使用适配器将光纤收发器连接到电源插座。
三、光纤接口设置1. 确保光纤收发器的输入光纤接口与光纤发送端的输出接口相匹配。
根据接口类型进行正确插入，确保连接紧密。
2. 若需要连接多个光纤收发器，可以使用光纤跳线进行链接，确保光纤的质量和可靠性。
四、电器信号设置1. 将电器设备需要传输的信号连接至光纤收发器的电器信号接口。
2. 确保信号线连接牢固，信号输入输出的插座都连接正确。
五、开机与使用1. 确保所有连接都正确无误后，开启光纤收发器的电源开关。
2. 光纤收发器会自动进行信号传输，传输稳定后即可正常使用。
六、注意事项1. 请勿将光纤收发器强行拆卸或改装，以免影响正常的工作效果。
2. 在使用过程中，如遇到任何异常情况或故障，请立即停止使用并联系售后服务人员进行检修。
3. 请定期清洁光纤收发器的外壳，保持其表面干净整洁。
4. 在使用光纤收发器时，请避免接触水或潮湿环境，以免发生短路或其他电路故障。
5. 长时间不使用光纤收发器时，建议断开电源并将其存放在干燥通风的地方，避免过高温度或湿度对设备的影响。
七、产品维护1. 定期检查和清洁光纤收发器的连接线路，确保连接牢固。
2. 若光纤收发器存在异常发热、信号不稳定等情况，请及时联系专业技术人员进行维护。
3. 请勿进行任何未经授权的维修或保养，以免对设备造成进一步损坏。
八、总结光纤收发器HTB1100是一款高性能的光纤通信设备，具备稳定可靠、传输距离远等优点。
10M100M(4口)光纤收发器说明书
四口10/100M光纤收发器用户手册○Z感谢阁下购买本公司产品，在使用之前请详细阅读本用户手册。
注意本手册任何部分不得复印，翻制或以任何形式在网络中发送，除非得到本公司的书面许可。
本公司有权随时更改产品性能及本手册说明而不事先通知客户。
本手册所提及的商标所有权由各商标持有人所有。
对于以任何形式修改产品及本手册说明而造成的产品功能不能实现，本公司将不负任何责任。
本公司对由合法渠道（包括授权代理）取得产品的用户提供壹年有限质保，但不包括由于操作不当，错误连接和其它人为损坏及自然灾害造成的产品损坏及人员伤害。
在质保期内由于产品本身质量而造成不能正常使用的，本公司负责回收换新。
回收的产品归本公司所有。
目录第一章概述1.1、产品概述1.2、性能特征1.3、外形尺寸1.4、电源与功率1.5、环境要求第二章开箱与安装2.1、开箱检查2.2、电源及连接2.3、安装与使用第三章机型说明3.1、发送（TV）机信号指示灯与功能接口定义3.2、接收（RV）机信号指示灯与功能接口定义3.3、机架插卡型接收机第四章典型应用第五章问题解答5.1、上电自检5.2、状态诊断5.3、故障及处理第一章概述1.1、产品概述四口10/100M光纤收发器是采用全数字无压缩技术，进行以太网传输的光通信设备。
本设备可将4路以太网等复用在同一光纤上传输。
可根据用户的实际需要进行配置，灵活实现各种组网方案，大大降低了组网成本，有效的保护了用户投资。
四口10/100M光纤收发器广泛适用于安防监控、高速公路、电子警察、自动化智能小区、海关、电力、水利、石油、化工等诸多领域。
接口功能快速浏览请见第三章。
四口10/100M光纤收发器分发送机与接收机2个系列，每个系列又各有1-4路以太网形成各种不同的具体机型，但所有机型基本外型相同，仅接口位置及数量有差异，请使用时注意辨认。
本手册以四口10/100M光纤收发器机型满配置为例加以描述，其他机型不再一一描述，均可参照本手册。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
产品名称: N-net 10/100M自适应以太网光纤收发器N-net 10/100M自适应以太网光纤收发器产品说明:N-net 10/100M自适应以太网光纤收发器概述NT-1100/NT-1100S 10/100M自适应以太网光纤收发器，可以将10/100Base-TX的双绞线电信号和100Base-FX的光信号进行相互转换。
它将网络的传输距离极限从铜线的100米扩展到100公里（单模光纤）。
典型应用是以太网距离互连，例如小区机房与城域网的连接。
由于具有自适应的功能，在与交换机连接时，交换机不需要任何设置。
新增防雷功能，保证了设备的安全性。
外置电源、内置电源可选交流220V、直流-48V 可选N-net 10/100M自适应以太网光纤收发器产品特性：自适应NT-1100/NT-1100S具有10/100M速率自适应，全/半双工自适应功能。
在网络升级时极大保护了原有的网络投资。
大容量缓存独有的缓存技术可以保证您的网络在数据传输及多媒体应用时表现得更为出色，缓存为2M。
N-net 10/100M自适应以太网光纤收发器性能：N-net 10/100M自适应以太网光纤收发器骨干特性符合：IEEE802.3 10Base-T标准符合：IEEE802.3U 100Base-TX/FX标准符合：IEEE802.3X 标准N-net 10/100M自适应以太网光纤收发器端口传输速率光口:100Mbps电口:10/100Mbps交叉线与直通线自动识别NT-1100/NT-1100S与交换机或服务器等设备相连时，既可以使用交叉线也可以用直通线。
TX LINK/ACT灯亮，表示链路连通正确。
N-net 10/100M自适应以太网光纤收发器双工支持NT-1100/NT-1100S支持全/半双工自适应，10/100M自适应。
N-net 10/100M自适应以太网光纤收发器网络线缆10/100Base-TX UTP 5类线100Base-FX：多模光纤50/125，62.5/125或100/140μm单模光纤8.3/125，8.7/125，9/125或10/125μmN-net 10/100M自适应以太网光纤收发器传输距离10/100Base-TX：100米100Base-FX：2公里（多模），25/40/60/100公里（单模）N-net 10/100M自适应以太网光纤收发器光接口特性：波长：1310nm（25公里、40公里、2公里）1550nm（100公里）1310nm（多模2公里）N-net 10/100M自适应以太网光纤收发器LED显示：PWR：电源指示灯FX LINK/ACT：光链路连接/活动状态指示灯TX LINK/ACT：电链路连接/活动状态指示灯FX100：光口速率指示灯TX100：电口速度指示灯FDX：全、半双工指示灯N-net 10/100M自适应以太网光纤收发器端口配置：1个RJ45 10/100Base-TX端口1个SC/ST 多模/单模双工连接头N-net 10/100M自适应以太网光纤收发器电源要求：外置电源：5VDC 1A功耗：＜5W内置电源：220VAC、-48VDC功耗：＜5WN-net 10/100M自适应以太网光纤收发器环境要求：工作温度范围：0℃～60℃储存温度范围：-40℃～85℃相对湿度：5%～90%尺寸：电源外置式：26mm×71mm×94mm电源内置式：40mm×110mm×140mm以太网光纤收发器以太网光纤收发器机架说明书(使用前先阅本说明书)目录第一章10/100M光纤收发器说明书 (8)简介 (8)包装清单 (10)安装 (10)指示灯的说明: (11)光传输特性: (12)单纤双向光传输特性: (12)主要特性 (12)技术参数 (12)外型尺寸 (13)DIP开关说明 (13)使用注意事项 (13)常见故障排除 (14)第二章网管式光纤收发器用户使用指导 (14)第一章产品简介 (14)1.1产品描述 (14)1.2产品特点 (14)1.3技术参数 (14)第二章操作手册 (16)2.1前面板 (16)2.1.1指示灯 (16)2.1.2光接口 (17)2.1.3以太网接口（NODE/HUB） (17)2.2SW1设置 (17)第三章安装 (19)3.1安装及调试 (19)3.2简易故障分析及处理 (19)第三章1000M光纤收发器说明书 (19)简介: (19)包装清单 (20)安装 (20)指示灯的说明: (22)光纤参数 (22)技术参数 (22)使用注意事项 (23)第四章10/100/1000M光纤收发器说明书 (23)概述 (23)型号描述 (23)包装清单 (23)LED描述: (24)安装转换器的步骤： (24)链接到吉比特装置： (25)电缆连接参数： (25)TP-光纤技术规格： (25)第五章NT-R14/R16/R16M光纤收发器机架 (25)简介： (25)清单： (26)系统概述： (26)安装方法 (26)技术规格： (26)第六章MODEL277RS-232/RS-485/RS-422接口光纤MODEM (27)一、技术参数 (27)二、产品简介 (27)三、面板丝印图如图1 (28)四、接口说明 (28)五、指示灯说明 (28)M ODEL277RACK A型 (29)指示灯说明 (29)接口说明 (29)M ODEL277RACK B型 (30)指示灯说明 (30)接口说明 (30)第七章多电口交换型收发器 (30)简介 (30)包装清单 (32)安装 (32)指示灯的说明 (34)主要特性： (35)技术参数： (35)使用注意事项： (36)第八章光纤模式转换器 (36)G IGABIT 1000SX-1000LX多模到单模光纤介质转换器 (37)型号说明 (37)装箱单 (37)安装转换器 (37)光缆连接参数 (38)LED说明 (38)直流插孔和AC-DC适配器 (38)技术规格 (39)100SX-100LX快速以太网多模到单模光纤介质转换器 (39)概述 (39)型号说明 (40)装箱单. (40)安装转换器 (40)光缆连接参数 (40)LED说明 (41)直流插孔和AC-DC适配器 (41)技术规格 (41)第一章10/100M光纤收发器说明书简介感谢您购买N-net快速以太网光纤收发器！该收发器支持IEEE802.3U100Base-TX/FX,支持全双工或半双要参照以下订购指南选购。
✧102F为NT-R16机架用的子卡.✧NT-1100P 卡式113C方案收发器,铝合金NT-R16D机架用包装清单在安装收发器前，请确认包装内是否有以下物品：快速以太网光纤收发器1台AC/DC电源适配器（外置）1个电源线（内置）1条用户手册1本保修卡1份说明书1份合格证1份以上物品如有缺失或损坏，请速与经销商联系。
安装1、接口RJ-45接口传输介质为五类双绞线，典型连接长度为100米。
具有自动识别直通线与交叉线功能。
光纤接口SC光纤接口为全双工光纤接口，包括发射端口（TX）和接收端口（RX）两个端口。
当两台光纤收发器对接或与带光纤接口的交换机连接时，光纤交叉连接，即“TX-RX”“RX-TX”。
2、连接带RJ-45接口的网络设备（工作站，集线器或交换机）通过双绞线连接到光纤收发器的RJ-45插座。
用单模光纤线连接到光纤收发器的SC光纤接口。
接通电源。
当线缆连接正确后，相应的LED指示灯点亮（LED 指示灯见下表说明）指示灯用于设备监控和故障显示，下面是对每个指示灯的解释。
光传输特性:单纤双向光传输特性:1、符合IEEE802.3 10Base-T标准；符合IEEE802.3u100Base-TX/FX标准。
2、全双工IEEE802.3X和半双工背压流量控制。
3、自动识别MDI/MDI-X。
4、符合FCC Part 15 Class A及CE Mark安规。
技术参数1、标准协议：IEEE 802.3 10Base-T标准IEEE802.3u 100Base-TX/FX标准2、连接器：一个UTP RJ-45连接器，一个SC/ST连接器。
3、工作方式：全双工或半双工工作方式。
4、电源参数：外置：输入：AC 90~264V/DC100~380V 输出：DC5V 1A内置：输入：AC 90~264V/DC100~380V5、环境温度：0℃至60℃6、相对湿度：5%至90%7、TP线缆：Cat.5 UTP cable8、传输光纤：多模：50/125，62.5/125or 100/140µm单模：8.3/125，8.7/125，9/125or10/125µm 外型尺寸电源外置式：94mmX71mmX26mm电源内置式：140mmX110mmX30mm卡式:大卡（1100P）：114mmX88mmX26mm 小卡（102F）：100mmX86mmX25mmDIP开关说明：（６位拨码开关）使用注意事项1、本产品宜在室内使用；2、不使用时，务必将光纤接口的防尘罩盖上；3、光纤收发器通电时，严禁用肉眼直视TX光纤发射端口！4、单纤收发器须配对使用（AB配对使用）A：TX1550 /RX1310（nm） B: TX1310 /RX1550 (nm)常见故障排除1、设备不匹配。
本产品在与其他网络设备（网卡，集线器，交换机）连接时，请根据本产品的传输速率（10Mbps或100Mbps）选择相应速率的网络设备。
2、光纤布线时，线路损耗过大。
接头插损过大、光纤熔接损耗过大、中间节点过多等都可能导致丢包率过高或无法正常传输。
第二章网管式光纤收发器用户使用指导第一章产品简介1.1 产品描述光纤收发器用于双绞线与光缆之间的数据通讯，支持用户利用单模或多模光纤扩展UTP网络的规模，广泛应用于以太网数据通讯需扩展传输距离的地方，通过光纤链路实现网络的扩展和延伸。
光纤的低损耗、高抗电磁性，使网络传输距离从100米扩展到几十公里，乃至上百公里的同时，也使数据通讯质量有了较大的提高；使服务器、中继器、交换机、终端机之间的互联更加简捷。
本手册介绍了光纤收发器的特点、性能指标、使用和维护等相关问题。
为了更好的发挥产品的功能特点，确保正确、安全地使用和维护，请您在安装、使用前，仔细阅读本手册。
1.2 产品特点•支持SNMP网管（仅限网管型设备）；•可设置断路检测（link-loss）功能；•四种转发模式可调；•符合IEEE 802.3µ 100BASE-FX/TX, IEEE802.3 10BASE-T等标准；•支持IEEE 802.1Q VLAN TAG, Spanning Tree等协议；•网口支持10/100M，全/半双工自适应；•网口支持平行/交叉网线自适应；•光路最远支持120km的传输距离；•支持1600Bytes大包；•在机架设备中使用时支持热插拔；•卡片在台式/机架设备中可通用；1.3 技术参数第二章操作手册2.1 前面板图一. 双纤收发器前面板图图二. 单纤收发器前面板图2.1.1 指示灯光纤收发器前面板共有六个灯，分别为：2.1.2RX：光信号接收口TX：光信号发送口（单纤光连接器时此口作为单纤接口）2.1.3 以太网接口（NODE / HUB）可自动识别直通线和交叉线，RJ-45连接端口的引脚定义如下：Pin1 TX+ 发射正极Pin2 TX- 发射负极Pin3 RX+ 接收正极Pin4 NC 闲置Pin5 NC 闲置Pin6 RX- 接收负极Pin7 NC 闲置Pin8 NC 闲置2.2 SW1设置10/100M光纤收发器电路板上的八位拨码开关SW1功能设置如下：建议将SW1保持在默认设置。