英文合同范本
英文合同范本6篇
英文合同范本6篇篇1合同编号: _______________________签订日期: _______________________甲方(客户): _______________________乙方(服务提供商): _______________________一、合同双方1. 甲方为本合同之客户,需求乙方提供的服务内容。
2. 乙方为本合同之服务提供商,同意按照本合同的规定向甲方提供所需的服务。
二、服务内容乙方同意向甲方提供以下服务:____________________________________________________________________ ___。
具体服务内容根据双方协商确定。
三、服务期限本合同的服务期限为______年/月,自签订之日起生效。
除非双方另有约定,否则期满后合同自动终止。
如需续签,双方应在本合同到期前进行协商。
四、服务费用与支付方式1. 甲方应按照约定的金额向乙方支付服务费用。
总金额为:________元人民币(或美元等)。
具体金额及支付方式由双方协商确定。
2. 支付方式:______________________。
(如:银行转账、在线支付等)3. 乙方应在收到款项后提供相应的发票或收据。
五、服务标准与质量保证1. 乙方应提供符合行业标准的服务,确保服务质量。
2. 如因乙方原因未能达到约定的服务质量,甲方有权要求乙方进行整改或退款。
3. 乙方应保护甲方的隐私信息,未经甲方同意,不得泄露或利用甲方的信息。
六、违约责任与赔偿1. 如因乙方原因未能按照本合同约定提供服务,乙方应承担违约责任。
2. 如因甲方原因未能按照本合同约定支付费用,甲方应承担违约责任。
3. 任何一方违反本合同约定,应向对方支付违约金,并赔偿由此造成的损失。
七、争议解决1. 本合同的解释、履行和争议解决应遵守中华人民共和国法律。
2. 如双方在本合同履行过程中发生争议,应首先通过友好协商解决;协商不成的,任何一方均有权向有管辖权的人民法院提起诉讼。
英文合同范本4篇_合同范本
英文合同范本4篇棉花买卖合同范本买方:卖方:buyer:seller:地址:地址:address:address:电话:电话:tel:tel:传真:传真:fax:fax:电子邮件:电子邮件:e-mail:e-mail:本合同由买卖双方订立,根据本合同规定的条款,买方同意购买、卖方同意出售下述商品:this contract is made and entered into by and between the buyer and the seller; and in accordance with the terms and conditions of the contract, the buyer agrees to buy and the seller agrees to sell the following commodity:1 商品名称1 commodity1/ 26产地:origin:生产年度:crop year:类别: (细绒棉,长绒棉)category: _________ (upland cotton, long-staple cotton) 加工方式:ÿ锯齿棉ÿ皮辊棉ginning: ÿ saw ginned ÿ roller ginned2 规格/质量2 specifications/quality级别: ÿusda通用棉花标准grade: ÿusda universal cotton standardsÿ凭小样(小样型号)ÿ by type:长度: (英寸,毫米)staple length: (inch/mm)马克隆值:nclmicronaire:ncl断裂比强度值: 最小值克/特克斯,平均值克/特克斯以上strength: minimum grams/tex,average above grams/tex3 数量2/ 263 quantity净重: (吨,磅,包)net weight: (ton/pound/bale)溢短装率: %(默认值为1.5%) ÿ 不允许多装weight tolerance ratio %( if not specified here, 1.5% will be applied)ÿ excess not allow ed吨与磅的换算公式: 1吨=2204.62磅conversion between ton and pound: 1 ton=2204.62 pounds 4价格4 price单价: (美分/磅,人民币元/吨)unit price: (usc(cent)/pound or rmb(yuan)/ton) 价格条件: (cif,cfr, fob,其它)terms: (cif, cfr, fob or others)总价: (美元,人民币元)total value: (usd/rmb)5付款方式ÿ 信用证ÿ 凭单托收ÿ 其它5 payment terms ÿ letter of credit ÿ d/p ÿ others6重量、质量检验:ciq检验证书为结算和索赔的依据6 weight and quality inspection: ciq inspectioncertificate shall be the basis for settlement and 3/ 26compensation7装运/交货日期:从——(年月日)到——(年月日),或按月等量装运/交货(每月数量) (吨,磅,包)7 shipment / delivery: shipment /delivery from_________(mm/dd/yy) to_______(mm/dd/yy)or equal monthly shipment/delivery as follows: ___________( ton, pound, bale)8目的地:8 destination:9一般条款9 general terms一般条款为本合同不可分割的一部分。
完整的英文合同范本
完整的英文合同范本合同(Contract)一、合同双方甲方(Party A):公司名称:[公司名称]法定代表人:[法定代表人姓名]地址:[公司地址]联系电话:[联系电话]乙方(Party B):公司名称:[公司名称]法定代表人:[法定代表人姓名]地址:[公司地址]联系电话:[联系电话]二、合同目的本合同旨在明确甲、乙双方在[具体事项]方面的权利和义务,确保合作的顺利进行。
三、合作内容1. 乙方同意为甲方提供[服务或产品名称],具体内容和要求详见附件[附件名称]。
2. 甲方应按照约定支付相应的费用给乙方。
四、服务期限本合同的服务期限自[起始日期]起至[结束日期]止。
五、费用及支付方式1. 甲方应向乙方支付的总费用为[具体金额],支付方式为[支付方式,如一次性支付、分期支付等]。
2. 具体支付时间和金额如下:[支付阶段 1]:在[支付日期 1]支付[金额 1];[支付阶段 2]:在[支付日期 2]支付[金额 2];六、双方的权利和义务甲方的权利和义务:1. 有权要求乙方按照合同约定提供服务或产品。
2. 按时支付费用。
3. 提供必要的协助和配合,以便乙方顺利履行合同义务。
乙方的权利和义务:1. 按照合同约定提供高质量的服务或产品。
2. 遵守甲方的相关规定和要求。
3. 保守甲方的商业秘密和机密信息。
七、知识产权1. 乙方提供的服务或产品所涉及的知识产权归乙方所有,但甲方在合同期限内享有使用权。
2. 未经乙方书面同意,甲方不得擅自使用、转让或许可他人使用乙方的知识产权。
八、保密条款1. 双方应对在合同履行过程中知悉的对方商业秘密、机密信息等予以保密,不得向任何第三方披露。
2. 保密期限为本合同终止后[保密期限]年。
九、违约责任1. 若一方违反本合同约定,应承担违约责任,赔偿对方因此遭受的损失。
2. 如因不可抗力等不可预见、不可避免的原因导致合同无法履行,双方互不承担违约责任。
十、争议解决本合同的履行过程中如发生争议,双方应通过友好协商解决;协商不成的,任何一方均可向有管辖权的人民法院提起诉讼。
英文版合同范本4篇_合同范本
英文版合同范本4篇contract no:date:the buyer:the seller:the contract, made out, in chinese and english, both version being equally authentic, by and between the seller and the buyer whereby the seller agrees to sell and the buyer agrees to buy the undermentioned goods subject to terms and conditions set forth hereinafter as follows:1 name of commodity and specification2 country of origin & manufacturer3 unit price (packing charges included)4 quantity5 total value6 packing (seaworthy)7 insurance (to be covered by the buyer unless otherwise)8 time of shipment9 port of loading10 port of destinationmark shown as below in addition to the port of destination, package number, gross and net weights, measurements and other marks as the buyer may require stencilled or marked conspicuously with fast and unfailing pigments on each package. in the case of dangerous and/or poisonous cargo(es), the seller is obliged to take care to ensure that the nature and the generally adopted symbol shall be marked conspicuously on each package..12 terms of payment:one month prior to the time of shipment the buyer shallopen with thebank of _______an irrevocable letter of credit in favour of the seller payable at the issuing bank against presentation of documents as stipulated under clause 18. a. of section ii, the terms of delivery of this contract after departure of the carrying vessel. the said letter of credit shall remain in force till the 15th day after shipment.13 other terms:unless otherwise agreed and accepted by the buyer, all other matters related to this contract shall be governed by section ii, the terms of delivery which shall form an integral part of this contract. any supplementary terms and conditions that may be attached to this contract shall automatically prevail over the terms and conditions of this contract if such supplementary terms and conditions come in conflict with terms and conditions herein and shall be binding upon both parties.for the seller for the buyersection 214 fob/fas terms14.1 the shipping space for the contracted goods shall be booked by the buyer or the buyer's shipping agent __________.14.2 under fob terms, the seller shall undertake to load the contracted goods on board the vessel nominated by the buyer on any date notified by the buyer, within the time of shipment as stipulated in clause 8 of this contract.14.3 under fas terms, the seller shall undertake to deliver the contracted goods under the tackle of the vessel nominated by the buyer on any date notified by the buyer, within the time of shipment as stipulated in clause 8 of this contract.14.4 10-15 days prior to the date of shipment, the buyer shall inform the seller by cable or telex of the contract number, nameof vessel, eta of vessel, quantity to be loaded and the name of shipping agent, so as to enable the seller to contact the shipping agent direct and arrange the shipment of the goods. the seller shall advise by cable or telex in time the buyer of the result thereof. should, for certain reasons, it become necessary for the buyer to replace the named vessel with another one, or should the named vessel arrive at the port of shipment earlier or later than the date of arrival as previously notified to the seller, the buyer or its shipping agent shall advise the seller to this effect in due time. the seller shall also keep in close contact with the agent or the buyer.14.5 should the seller fail to load the goods on board or to deliver the goods under the tackle of the vessel booked by the buyer. within the time as notified by the buyer, after its arrival at the port of shipment the seller shall be fully liable to the buyer and responsible for all losses and expenses such as dead freight, demurrage. consequential losses incurred upon and/or suffered by the buyer.14.6 should the vessel be withdrawn or replaced or delayed eventually or the cargo be shut out etc., and the seller be not informed in good time to stop delivery of the cargo, the calculation of the loss in storage expenses and insurance premium thus sustained at the loading port shall be based on the loading date notified by the agent to the seller (or based on the date of the arrival of the cargo at the loading port in case the cargo should arrive there later than the notified loading date). the abovementioned loss to be calculated from the 16th day after expiry of the free storage time at the port should be borne by the buyer with the exception of force majeure. however, the seller shall still undertake to load the cargo immediately upon thecarrying vessel's arrival at the loading port at its own risk and expenses. the payment of the afore-said expenses shall be effected against presentation of the original vouchers after the buyer's verification.15 c&f terms15.1 the seller shall ship the goods within the time as stipulated in clause 8 of this contract by a direct vessel sailing from the port of loading to china port. transhipment on route is not allowed without the buyer's prior consent. the goods shall not be carried by vessels flying flags of countries not acceptable to the port authorities of china.15.2 the carrying vessel chartered by the seller shall be seaworthy and cargoworthy. the seller shall be obliged to act prudently and conscientiously when selecting the vessel and the carrier when chartering such vessel. the buyer is justified in not accepting vessels chartered by the seller that are not members of the piclub.15.3 the carrying vessel chartered by the seller shall sail and arrive at the port of destination within the normal and reasonable period of time. any unreasonable aviation or delay is not allowed.15.4 the age of the carrying vessel chartered by the seller shall not exceed 15 years. in case her age exceeds 15 years, the extra average insurance premium thus incurred shall be borne by the seller. vessel over 20 years of age shall in no event be acceptable to the buyer.15.5 for cargo lots over 1,000 m/t each, or any other lots less than 1,000 metric tons but identified by the buyer, the seller shall, at least 10 days prior to the date of shipment, inform the buyer by telex or cable of the following information: the contract number, the name of commodity, quantity, the name of thecarrying vessel, the age, nationality, and particulars of the carrying vessel, the expected date of loading, the expected time of arrival at the port of destination, the name, telex and cable address of the carrier.15.6 for cargo lots over 1,000 m/t each, or any other lots less than 1,000 metric tons but identified by the buyer, the master of the carrying vessel shall notify the buyer respectively 7 (seven) days and 24 (twenty-four) hours prior to the arrival of the vessel at the port of destination, by telex or cable about its eta (expected time of arrival), contract number, the name of commodity, and quantity.15.7 if goods are to be shipped per liner vessel under liner bill of lading, the carrying vessel must be classified as the highest ____________or equivalent class as per the institute classification clause and shall be so maintained throughout the duration of the relevant bill of lading.nevertheless, the maximum age of the vessel shall not exceed 20 years at the date of loading. the seller shall bear the average insurance premium for liner vessel older than 20 years. under no circum -stances shall the buyer accept vessel over 25 years of age.15.8 for break bulk cargoes, if goods are shipped in containers by the seller without prior consent of the buyer, a compensation of a certain amount to be agreed upon by both parties shall be payable to the buyer by the seller.15.9 the seller shall maintain close contact with the carrying vessel and shall notify the buyer by fastest means of communication about any and all accidents that may occur while the carrying vessel is on route. the seller shall assume full responsibility and shall compensate the buyer forall lossesincurred for its failure to give timely advice or notification to the buyer.16 cif terms:under cif terms, besides clause 15 c&f terms of this contract which shall be applied the seller shall be responsible for covering the cargo with relevant insurance with irrespective percentage.17 advice of shipment:within 48 hours immediately after completion of loading of goods on board the vessel the seller shall advise the buyer by cable or telex of the contract number, the name of goods, weight (net/gross) or quantity loaded, invoice value, name of vessel, port of loading, sailing date and expected time of arrival (eta) at the port of destination. should the buyer be unable to arrange insurance in time owing to the seller's failure to give the above mentioned advice of shipment by cable or telex, the seller shall be held responsible for any and all damages and/or losses attributable to such failure.18 shipping documents18.a the seller shall present the following documents to the paying bank for negotiation of payment:18.a.1 full set of clean on board, "freight prepaid" for c&f/cif terms or "freight to collect" for fob/fas terms, ocean bills of lading, made out to order and blank endorsed, notifying ___________at the port of destination.18.a.2 five copies of signed invoice, indicating contract number, l/c number, name of commodity, full specifications, and shipping mark, signed and issued by the beneficiary of letter of credit.18.a.3 two copies of packing list and/or weight memo with indication of gross and net weight of each package and/ormeasurements issued by beneficiary of letter of credit.18.a.4 two copies each of the certificates of quality and quantity or weight issued by the manufacturer and/or a qualified independent surveyor at the loading port and must indicate full specifications of goods conforming to stipulations in letter of credit.18.a.5 one duplicate copy of the cable or telex advice of shipment as stipulated in clause 17 of the terms of delivery.18.a.6 a letter attesting that extra copies of abovementioned documents have been dispatched according to the contract.18.a.7 a letter attesting that the nationality of the carrying vessel has been approved by the buyer.18.a.8 the relevant insurance policy covering, but not limited to at least 110% of the invoice value against all and war risks if the insurance is covered by the buyer.18.b any original document(s) made by rephotographic system, automated or computerized system or carbon copies shall not be acceptable unless they are clearly marked as "original." and certified with signatures in hand writing by authorised officers of the issuing company or corporation.18.c through bill of lading, stale bill of lading, short form bill of lading, shall not be acceptable.18.d third party appointed by the beneficiary as shipper shall not be acceptable unless such third party bill of lading is made out to the order of shipper and endorsed to the beneficiary and blank endorsed by the beneficiary.18.e documents issued earlier than the opening date of letter of credit shall not be acceptable.18.f in the case of c&f/cif shipments, charter party bill of lading shall not be acceptable unless beneficiary provides onecopy each of the charter party, master's of mate's receipt, shipping order and cargo or stowage plan and/or other documents called for in the letter of credit by the buyer.18.g the seller shall dispatch, in care of the carrying vessel, two copies each of the duplicates of bill of lading. invoice and packing list to the buyer's receiving agent, _______________at the port of destination.18.h immediately after the departure of the carrying vessel, the seller shall airmail one set of the duplicate documents to the buyer and three sets of the same to______________________________ transportation corporation at the port of destination.18.i the seller shall assume full responsibility and be liable to the buyer and shall compensate the buyer for all losses arising from going astray of and/or the delay in the dispatch of the above mentioned documents.18.j banking charges outside the people's republic of china shall be for the seller's account.19 if the goods under this contract are to be dispatched by air, all the terms and conditions of this contract in connection with ocean transportation shall be governed by relevant air terms.20 instruction leaflets on dangerous cargo: for dangerous and/or poisonous cargo, the seller must provide instruction leaflets stating the hazardous or poisonous properties, transportation, storage and handling remarks, as well as precautionary and first-air measures and measures against fire. the seller shall airmail, together with other shipping documents, three copies each of the same to the buyer and___________________ transportation corporation at the port of destination.21 inspection & claims:in case the quality, quantity or weight of the goods be found not in conformity with those as stipulated in this contract upon re-inspection by the china commodity import and export inspection bureau within 60 days after completion of the discharge of the goods at the port of destination or, if goods are shipped in containers, 60 days after the opening of such containers, the buyer shall have the right to request the seller to take back the goods or lodge claims against the seller for compensation for losses upon the strength of the inspection certificate issued by the said bureau, with the exception of those claims for which the insurers or owners of the carrying vessel are liable, all expenses including but not limited to inspection fees, interest, losses arising from the return of the goods or claims shall be borne by the seller. in such a case, the buyer may, if so requested, send a sample of the goods in question to the seller, provided that sampling and sending of such sample is feasible.22 damages:with the exception of late delivery or non-delivery due to "force majeure" causes, if the seller fails to make delivery of the goods in accordance with the terms and conditions, jointly or severally, of this contract, the seller shall be liable to the buyer and indemnify the buyer for all losses, damages, including but not limited to, purchase price and/or purchase price differentials, deadfreight, demurrage, and all consequential direct or indirect losses. the buyer shall nevertheless have the right to cancel in part or in whole of the contract without prejudice to the buyer's right to claim compensations.23 force majeure:neither the seller or the buyer shall be held responsible for late delivery or non-delivery owing to generally recognized"force majeure" causes. however in such a case, the seller shall immediately advise by cable or telex the buyer of the accident and airmail to the buyer within 15 days after the accident, a certificate of the accident issued by the competent government authority or the chamber of commerce which is located at the place where the accident occurs as evidence thereof. if the said "force majeure" cause lasts over 60 days, the buyer shall have the right to cancel the whole or the undelivered part of the order for the goods as stipulated in contract.24 arbitration:both parties agree to attempt to resolve all disputes between the parties with respect to the application or interpretation of any term hereof of transaction hereunder, through amicable negotiation. if a dispute cannot be resolved in this manner to the satisfaction of the seller and the buyer within a reasonable period of time, maximum not exceeding 90 days after the date of the notification of such dispute, the case under dispute shall be submitted to arbitration if the buyer should decide not to take the case to court at a place of jurisdiction that the buyer may deem appropriate. unless otherwise agreed upon by both parties, such arbitration shall be held in ________, and shall be governed by the rules and procedures of arbitration stipulated by the foreign trade arbitration commission of the china council for the promotion of international trade. the decision by such arbitration shall be accepted as final and binding upon both parties. the arbitration fees shall be borne by the losing party unless otherwise awarded.seller: buyer:借款人:borrower:贷款人:lender:抵押人:mortgagor:保证人:surety :出质人:pledgeor:为明确各方权利和义务,根据《合同法》、《贷款通则》和其他有关法律、法规,订立本合同。
英文合同范本6篇
英文合同范本6篇篇1Contract SampleThis Agreement is made and entered into this ___ day of ____, 20__, by and between _________ (hereinafter referred to as "Seller") and _________ (hereinafter referred to as "Buyer").WHEREAS, Seller desires to sell to Buyer and Buyer desires to purchase from Seller the following described property (the "Property"):[Insert description of Property]NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, and for other good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, the parties hereto agree as follows:1. Purchase Price. Buyer agrees to pay to Seller the sum of $______ as the purchase price for the Property.2. Payment Terms. The purchase price shall be paid in the following manner: [Insert payment schedule].3. Delivery of Property. Seller shall deliver the Property to Buyer on or before [Insert delivery date]. Buyer shall be responsible for all costs associated with the delivery of the Property.4. Title and Risk of Loss. Title to the Property shall pass to Buyer upon receipt of the full purchase price. Risk of loss of the Property shall pass to Buyer upon delivery of the Property to Buyer.5. Inspection. Buyer shall have the right to inspect the Property within ____ days of delivery. If Buyer is not satisfied with the condition of the Property, Buyer may return the Property to Seller and receive a refund of the purchase price.6. Warranty. Seller warrants that Seller has good and marketable title to the Property and that the Property is free from any liens or encumbrances. Seller makes no other warranties, express or implied, regarding the Property.7. Governing Law. This Agreement shall be governed by and construed in accordance with the laws of the State of ________.8. Entire Agreement. This Agreement constitutes the entire agreement between the parties with respect to the subjectmatter hereof and supersedes all prior and contemporaneous agreements and understandings.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the date first above written.SELLER: __________________________BUYER: __________________________[Signatures of Seller and Buyer]篇2ContractThis agreement is made on the [date] between [Party A] and [Party B], hereinafter referred to as "the Parties".1. Parties to the Contract[Party A] is a company registered in [Location] with registered address at [Address] and [Party B] is a company registered in [Location] with registered address at [Address].2. Purpose of the ContractThe purpose of this contract is to establish the terms and conditions under which [Party A] will provide its services to [Party B] for the period of [duration].3. Scope of Services[Party A] agrees to provide the following services to [Party B]:- [Service 1]- [Service 2]- [Service 3]- [Service 4]4. Obligations of the Parties4.1 [Party A] shall:- Provide the services in a professional manner and in accordance with the terms of this contract.- Assign qualified personnel to perform the services.- Adhere to all laws and regulations applicable to the services.4.2 [Party B] shall:- Pay the fees for the services as specified in this contract.- Provide access to the necessary resources and information required for [Party A] to perform the services.5. Fees[Party B] agrees to pay [Party A] a total fee of [amount] for the services provided under this contract. The payment shall be made in [currency] within [number] days of the invoice date.6. Term of the ContractThis contract shall commence on [date] and shall remain in effect until [date]. The contract may be extended by mutual agreement of the Parties.7. TerminationEither Party may terminate this contract by giving [number] days written notice to the other Party. In the event of termination, [Party A] shall be entitled to payment for services rendered up to the date of termination.8. ConfidentialityThe Parties agree to keep all information exchanged during the performance of this contract confidential and not to disclose it to any third party without the other Party's consent.9. Governing LawThis contract shall be governed by and construed in accordance with the laws of [Jurisdiction]. Any disputes arising out of or in connection with this contract shall be resolved through arbitration in [Location].10. Entire AgreementThis contract constitutes the entire agreement between the Parties and supersedes any previous agreements or understandings relating to the subject matter of this contract.IN WITNESS WHEREOF, the Parties have executed this contract on the date first above written.[Signature of Party A] [Signature of Party B]篇3Sample Business ContractThis Agreement ("Agreement") is entered into by and between [Company Name], a corporation organized and existing under the laws of [State/Country], with its principal place of business located at [Address] ("Company"), and [Client Name], an individual residing at [Address], ("Client"), collectively referred to as the "Parties".1. ServicesCompany agrees to provide Client with the following services:- [Description of services]- [Description of services]- [Description of services]2. CompensationIn consideration for the services provided, Client agrees to pay Company the sum of [Amount] upon execution of this Agreement. Payment can be made via [Payment method] and is due within [Number] days of the Agreement date.3. TermThis Agreement shall be effective as of [Date] and shall continue until [Date], unless terminated earlier by either Party as provided herein.4. TerminationEither Party may terminate this Agreement by providing written notice to the other Party at least [Number] days prior to the desired termination date. In the event of termination, alloutstanding fees shall become due and payable within [Number] days.5. ConfidentialityDuring the term of this Agreement, both Parties agree not to disclose any confidential information shared by the other Party. This confidentiality provision shall survive the termination of this Agreement.6. IndemnificationClient agrees to indemnify and hold harmless Company, its directors, officers, employees, and agents from and against any and all claims, damages, liabilities, costs, and expenses, including legal fees arising from or related to Client's use of the services provided.7. Governing LawThis Agreement shall be governed by and construed in accordance with the laws of [State/Country]. Any disputes arising out of or in connection with this Agreement shall be exclusively resolved by the courts of [Jurisdiction].8. Entire AgreementThis Agreement constitutes the entire agreement between the Parties concerning the subject matter hereof and supersedes all prior and contemporaneous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties have executed this Agreement as of the date first above written.[Company Name]By: ________________________Name: ________________Title: ________________[Client Name]By: ________________________Name: ________________篇4Contract TemplateParties:This Agreement is made between [Party A] and [Party B] on [Date].1. Scope of Work:Party A agrees to provide [Services] to Party B in exchange for [Payment].2. Payment:Party B agrees to pay Party A [Amount] for the services provided. Payment shall be made on [Payment Terms].3. Term:This Agreement shall begin on [Start Date] and continue until [End Date], unless terminated earlier by either party with [Notice Period] notice.4. Intellectual Property Rights:All intellectual property rights created by Party A in the course of performing the services shall belong to Party A. Party A grants Party B a non-exclusive, royalty-free license to use such intellectual property.5. Confidentiality:Both parties agree to keep all information shared during the course of this Agreement confidential. This includes, but is not limited to, trade secrets, business operations, and client information.6. Termination:Either party may terminate this Agreement for any reason with [Notice Period] notice. Upon termination, Party B shall pay Party A for all services rendered up to the date of termination.7. Governing Law:This Agreement shall be governed by the laws of [Jurisdiction].8. Dispute Resolution:Any disputes arising under this Agreement shall be resolved through arbitration in [Jurisdiction].In witness whereof, the parties hereto have executed this Agreement as of the date first above written.[Signature of Party A] [Signature of Party B]This Contract Template is provided for informational purposes only and should not be considered legal advice. It is recommended to consult with a lawyer before using this template for any legal agreements.篇5Contract SampleThis agreement is entered into by and between [Name of the First Party], hereinafter referred to as "Party A", and [Name of the Second Party], hereinafter referred to as "Party B", on [Date of Signing the Contract].1. Purpose of the AgreementThe purpose of this agreement is to define the terms and conditions of the partnership between Party A and Party B in the provision of [Description of Services/Products/Work].2. Scope of WorkParty A and Party B agree to collaborate on [Description of Services/Products/Work] in the following manner:- Party A will be responsible for [Description of Party A's Responsibilities].- Party B will be responsible for [Description of Party B's Responsibilities].3. Duration of the AgreementThis agreement will be effective as of [Date of Commencement] and will remain in effect until [Date of Termination] unless terminated by either party with [Number of Days] days’ written notice.4. Payment TermsParty B agrees to pay Party A a total of [Amount of Payment] for the provision of [Description of Services/Products/Work]. Payment shall be made in [Payment Method] within [Number of Days] days of the completion of the work.5. ConfidentialityBoth Party A and Party B agree to keep all information related to this agreement confidential and not to disclose it to any third party without the other party's consent.6. TerminationEither Party A or Party B may terminate this agreement in case of a material breach by the other party. The terminating party must provide written notice of the breach and allow [Number of Days] days for the other party to remedy the breach.7. Governing LawThis agreement shall be governed by and construed in accordance with the laws of [Name of the Jurisdiction].In witness whereof, the parties hereto have caused this agreement to be executed on the date first above written.[Signature of Party A][Name of Party A][Title of Party A][Signature of Party B][Name of Party B][Title of Party B]This contract sample is a general template and may need to be modified to suit specific business requirements. It is recommended to seek legal advice before signing any contract.篇6Contract TemplateThis Contract Template ("Agreement") is entered into as of [Date] by and between [Party A], located at [Address], and [Party B], located at [Address].1. Services: [Party A] agrees to provide [Description of Services] to [Party B] from [Start Date] to [End Date].2. Compensation: In consideration for the Services provided, [Party B] agrees to pay [Party A] the sum of [Amount] by [Payment Due Date]. Payment shall be made via [Payment Method].3. Term: This Agreement shall commence on the Start Date and terminate on the End Date unless terminated earlier in accordance with the provisions of this Agreement.4. Termination: Either party may terminate this Agreement upon [Number] days' written notice to the other party.5. Confidentiality: Both parties agree to keep all information received under this Agreement confidential and not disclose it to any third party.6. Governing Law: This Agreement shall be governed by and construed in accordance with the laws of [State/Country].7. Entire Agreement: This Agreement constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings.8. Amendments: This Agreement may only be amended in writing signed by both parties.IN WITNESS WHEREOF, the parties have executed this Agreement as of the date first written above.[Party A]By: _______________________Title: ______________________[Party B]By: _______________________Name: _____________________Title: ______________________This Contract Template is hereby agreed to by the parties as of the date first written above.[Signature Page Follows][Signature Page][Party A]By: _______________________Name: _____________________Title: ______________________[Party B]By: _______________________Name: _____________________This Contract Template is hereby agreed to by the parties as of the date first written above.。
完整的英文合同范本
完整的英文合同范本Contract No.: [合同编号]This Contract is made and entered into as of [date] (the "Effective Date") by and between:Party A:Name: [甲方名称]Address: [甲方地址]andParty B:Name: [乙方名称]Address: [乙方地址]WHEREAS, the parties desire to enter into an agreement for the purposes hereinafter set forth;NOW, THEREFORE, in consideration of the mutual covenants and agreements hereinafter contained, the parties hereto agree as follows: Article 1. Definitions[定义条款]Article 2. The Scope of Work[工作范围条款]Article 3. Consideration[对价条款]Article 4. Term of the Contract[合同期限条款]Article 5. Obligations and Responsibilities of Party A [甲方义务和责任条款]Article 6. Obligations and Responsibilities of Party B [乙方义务和责任条款]Article 7. Confidentiality[保密条款]Article 8. Termination[终止条款]Article 9. Dispute Resolution[争议解决条款]Article 10. Miscellaneous Provisions[其他条款]IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Party A: [甲方签字]Party B: [乙方签字]以上只是一个基础框架,你可以根据具体的合同需求进行详细内容的填充和修改。
外贸合同范本英文3篇
外贸合同范本英文3篇篇1International Trading ContractThis contract is made on [Date] between [Company Name 1, the Seller], whose registered office is located at [Address 1], and [Company Name 2, the Buyer], whose registered office is located at [Address 2], in connection with the sale of the following products:Product Description:The Seller shall supply, and the Buyer shall purchase, the goods specified below:* Product Name: [Name of Product]* Quantity: [Quantity of Product]* Unit Price: [Unit Price]* Total Value: [Total Value of Contract]* Quality/Specification: [Detailed Description of Quality and Specification]* Delivery Date: [Scheduled Delivery Date]Terms of Delivery:1. The Seller shall deliver the goods FOB (Free On Board) at the Seller's port of [Port Name].2. The Seller shall inform the Buyer of the expected date of shipment and provide necessary shipping documents.3. The goods shall be properly packed and marked with correct identification of the contents.4. The Buyer shall arrange customs clearance and take delivery of the goods at the port of destination.Terms of Payment:1. The Buyer shall make a deposit payment of [Percentage] upon signing this contract.2. The balance payment shall be made upon receipt of the shipping documents and confirmation of arrival of the goods at the port of destination.3. All payments shall be made in [Currency].Quality Inspection and Warranty:1. The Seller guarantees that the goods shall be in conformity with the contracted quality specifications.2. The Seller shall provide a quality certificate or guarantee to authenticate the quality of the goods.3. In case of any discrepancy in quality, the Buyer shall notify the Seller within [Number of Days] days upon arrival of the goods for necessary adjustments or replacement.Force Majeure:Confidentiality:Both parties shall keep all information related to this contract confidential and not disclose it to any third party without the prior written consent of the other party.Disputes Resolution:Any disputes arising from or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.Miscellaneous:Signed by:Seller: _____________________ Date: _________Buyer: _____________________ Date: _________注意:本合同仅为范本,实际使用时应根据具体情况进行修改。
英文外贸合同范本英文7篇
英文外贸合同范本英文7篇篇1International Trade Contract (外贸合同范本)Contracting Parties(合同双方)Buyer: [买方公司名称](以下简称甲方)Seller: [卖方公司名称](以下简称乙方)In accordance with the principles of mutual respect and mutual benefit, both parties agree to conclude this contract for the purpose of purchasing and selling the following goods: (双方本着相互尊重、互利互惠的原则,为购销以下商品签订本合同。
)Article 1: Contract Commodities(商品条款)(详细说明商品的名称、规格、数量、单价等。
)Article 2: Contract Price and Payment Terms(价格与支付条款)The total contract price shall be paid in full within XX days of receiving the goods with the following payment terms: (货款总额在收货XX天内全额支付,具体支付条款如下:)- Deposit (定金): XX% prior to shipment. (发货前支付XX%定金。
)- Balance (尾款): against presentation of shipping documents.(提交运输单据后支付尾款。
)Article 3: Delivery and Quality Assurance(交货与质量保证条款)The Seller shall ensure that the goods are delivered within the agreed time frame and meet the specified quality standards.(卖方应确保在约定时间内交货,且货物符合约定的质量标准。
英文合同范本2024年版8篇
英文合同范本2024年版8篇篇1英文合同范本CONTRACTThis Contract is made on [Date] between [Party A Name] and [Party B Name] (hereinafter referred to as "Both Parties").1. PREAMBLEIn consideration of mutual promises and agreements between the parties as set out below, and intended to be legally binding upon both parties, the parties hereby agree as follows:2. RECITALSThe parties acknowledge the following facts prior to entering into this Contract:(Insert recitals or background information related to the contract)3. DEFINITIONS AND INTERPRETATIONUnless otherwise specified in this Contract, the following terms shall have the meanings specified in this Section: (Insert any relevant terms and their definitions). This Contract shall be interpreted as a whole and its provisions shall be read and interpreted together.4. SCOPE OF WORK AND PERFORMANCE(Insert detailed scope of work, responsibilities, obligations, and performance standards of both parties).5. CONTRACT PRICE AND PAYMENTThe total contract price is [Amount]. Payment terms, including payment schedule, methods of payment, and any applicable penalties or late fees, shall be specified in this section.6. TIMELINE AND COMPLETION DATES(Insert specific dates for key milestones, completion dates, and any extensions or allowances for delays). Both parties shall adhere to these timelines and any changes must be mutually agreed in writing.7. CONFIDENTIALITY AND NON-DISCLOSUREBoth parties shall maintain confidentiality of all information shared during the performance of this Contract. Any disclosureof confidential information without the other party's consent is prohibited.8. WARRANTIES AND GUARANTEES(Insert any warranties or guarantees provided by either party related to the performance of the contract). Any breach of these warranties shall be addressed in accordance with the remedies specified in this Contract.9. FORCE MAJEUREIf any event beyond the reasonable control of either party occurs, such as acts of war, natural disasters, labor disputes, etc., the affected party shall notify the other party promptly and both parties shall work together to find a solution.10. TERMINATIONThis Contract may be terminated by either party for any breach of the terms and conditions specified herein. The terminating party shall provide written notice and specify the reasons for termination. The non-breaching party may seek damages as per the terms of this Contract.11. DISPUTE RESOLUTIONAny disputes arising out of or in connection with this Contract shall be resolved through negotiation. If negotiation fails, either party may initiate mediation or arbitration in accordance with [Specified laws or institutions].12. MISCELLANEOUS(Insert any other miscellaneous terms and conditions that are not elsewhere specified in this Contract).In witness whereof, the parties have executed this Contract on the date specified above.Party A: _____________________ (Authorized Representative)Date: _____________________Signature: _____________________Party B: _____________________ (Authorized Representative)Date: _____________________Signature: _____________________----------------------------------------- 调试结束------------------------------------------这是一篇较全面的英文合同范本,内容包含了合同的基本结构、双方的权利义务、违约责任等重要内容。
英文合同模板集合8篇
英文合同模板集合8篇英文合同模板集合8篇随着法治精神地不断发扬,人们愈发重视合同,合同的类型越来越多,签订合同是为了保障双方的利益,避免不必要的争端。
那么问题来了,到底应如何拟定合同呢?以下是小编帮大家整理的英文合同8篇,欢迎大家借鉴与参考,希望对大家有所帮助。
英文合同篇1关于英文合同(转)来源:郑旭江的日志合同条款常用英文词汇买方 buyer卖方 seller项目名称 Project name地址 address电话 phone传真 fax联系人 contact person本合同由买卖双方签订,根据本合同条款,买方同意购买,卖方同意出售以下产品。
This contract is made by and between the buyers and sellers, whereby the buyers agree to buy and the sellers agree to sell the under-mentioned. Commodities according to the terms and conditions stipulated below.1. 详细货物清单 Detail supply list2. 合同价格 Contract value序号 item 型号 model 尺寸 size, dimension 数量 amount, unit 单价unit price 总价total price 备注remark 货物,运费freight, transportation 合同总额(含安装费与税金) Contract amount incl. VAT installation3. 付款条件 payment conditions, payment terms4. 交货地点 delivery place5. 发货期 delivery time6. 安装条款 installation clause7. 验收条款 inspection clause8. 保证条款 guarantee clause9. 不可抗拒条款 Force Majeure Clause10. 违约条款 Breach clause11. 其他条款 Miscellaneous clause12. 买卖双方信息 buyer and seller information此合同一式二份,由双方各持一正本。
外贸合同范本英文8篇
外贸合同范本英文8篇篇1Contract for Foreign Trade甲方(买方):____________乙方(卖方):____________鉴于甲、乙双方同意按照本合同的规定进行货物买卖,双方经友好协商一致,达成如下协议:I. 合同双方Party A (Buyer): ____________Party B (Seller): ____________II. 合同货物与规格The contracted goods and specifications: (具体货物与规格)III. 数量与价格Quantity and Price: (具体数量和价格)IV. 交货和包装Delivery and Packing:1. 交货期限:乙方应在本合同签订后_____天内交货。
Delivery deadline: Party B shall complete the delivery within _____ days after the signing of this contract.2. 交货地址:____________。
Delivery address: _____________.3. 包装要求:乙方应按照适用的国际贸易惯例进行包装,确保货物在运输过程中的安全。
Packing requirement: Party B shall pack the goods according to applicable international trade practices and ensure the safety of the goods during transportation.V. 付款方式和时间Payment Term and Time:1. 预付款:甲方应在合同签订后_____天内支付乙方总金额的_____%作为预付款。
Prepayment: Party A shall pay Party B _____% of the total amount within _____ days after the signing of the contract as a prepayment.2. 尾款:乙方在收到预付款后发货,甲方在收到货物并确认质量无误后_____天内支付剩余款项。
英文合同范文模板7篇
英文合同范文模板7篇篇1CONTRACTThis Contract is made on [Date] between [Company A], with its principal place of business located at [Address A], hereinafter referred to as "Company A", and [Company B], with its principal place of business located at [Address B], hereinafter referred to as "Company B".In consideration of the mutual promises and agreements set out below, the parties hereby agree as follows:1. Scope of WorkCompany B shall perform the following tasks for Company A: [Describe the tasks in detail, including but not limited to the specific responsibilities, deliverables, milestones, and any other related work that Company B needs to accomplish].2. Term of ContractThis Contract shall be effective as of the date of signing and shall continue for a period of [Insert duration of the contract] unless otherwise terminated by either party in accordance with the provisions set out in Section [Number/Letter].3. Fees and PaymentIn consideration of the services to be provided by Company B, Company A shall pay to Company B a total fee of [Insert total fee] in accordance with the following payment schedule: [Insert payment terms and schedule]. All fees are exclusive of taxes, unless otherwise stated.4. ConfidentialityBoth parties shall maintain the confidentiality of all information disclosed to them during the term of this Contract, which is hereby declared to be confidential and proprietary. Neither party shall disclose any confidential information to third parties without the prior written consent of the other party.5. Intellectual Property RightsAll intellectual property rights arising out of this Contract shall be owned by Company A unless otherwise agreed in writing by both parties. Company B shall have the right to use any materials, ideas, or concepts developed during the performanceof this Contract for the purpose of performing its duties under this Contract only.6. Warranty and IndemnificationCompany B shall perform its obligations under this Contract in a workmanlike manner and shall ensure that all work product is free from defects in material and workmanship. If any claim is made against Company A arising from defects in the work product, Company B shall indemnify and hold harmless Company A from any and all liabilities, losses, damages, costs, and expenses related to such claims.7. TerminationThis Contract may be terminated by either party at any time for any reason upon written notice to the other party. In addition, this Contract may be terminated immediately if either party commits a material breach of its obligations under this Contract. Termination shall not affect any obligation that has already been incurred by either party prior to termination.8. General ProvisionsThis Contract constitutes the entire agreement between the parties pertaining to the matters set out herein and supersedes all prior agreements, oral or written, between the partiespertaining to such matters. This Contract shall be governed by the laws of [Insert jurisdiction]. Any dispute arising out of or in connection with this Contract shall be resolved in accordance with the provisions set out in Section [Number/Letter].IN WITNESS WHEREOF, the parties have executed this Contract on the date stated at the beginning of this document.Company A: _____________________By: _____________________Title: _____________________Date: _____________________(Sign)(Corporate Seal, if applicable) _____________________ (Company A Name) Ltd (If applicable)篇2合同协议范本合同编号:XXXX-XXXX甲方(Client A):________________________乙方(Client B):________________________根据中华人民共和国有关法律法规,甲乙双方在平等、自愿、公平和诚实信用的原则基础上,就以下事项达成如下协议:一、合同双方基本信息甲方全称:____________________________ 法定代表人:____________ 联系方式:___________________________乙方全称:____________________________ 法定代表人:____________ 联系方式:___________________________二、合同目的及业务内容本合同旨在明确甲乙双方之间的业务合作关系,具体业务内容包括但不限于以下方面:____________ (此处详细描述双方合作的业务内容、范围及预期目标等)。
英文合同模板合集8篇
英文合同随着人们法律意识的建立,人们运用到合同的场合不断增多,合同是对双方的保障又是一种约束。
那么问题来了,到底应如何拟定合同呢?下面是小编整理的英文合同8篇,希望能够帮助到大家。
英文合同篇1Buyer: 买方:Add.: 地址:Seller: 卖方:Add.: 地址:This purchase contract (hereafter abbreviated “contract”) is signed by and between the Buyer and the Seller upon equal negotiations based on the Contract Law of P..R .China and other relevant laws and regulations.. Both parties agree to sell and buy goods on following terms and conditions.此销售合同(以下简称“合同”)根据<<中华人民共和国合同法>>及相关法律法规并经由买卖双方经平等协商后共同签定,买方与卖方均同意以下条款和条件购买和出售货物。
1. COMMODITY NAME品名:Work glves 劳保手套SPECIFICATION AND PRICE 规格与价格:Grey cow split leather .The leather palm is to measure 205 mm from the tip of the middle finger to the wrist and 125 mm hand wide.灰色牛革质料。
皮革掌面从手指到腕部205毫米,掌宽125毫米。
PRICE OF PAIR: 价格:每双:6元人民币QUANTITY: 4000 pair 数量:4000双TOTAL AMOUNT: 总价:2. Delivery: 交货方式:Description, quantity, unit price, total amount and other details of the goods ordered please refer to detail order, invoiceand packing list. The name of the issuing company of invoice must be the same as the seller.采购品名、规格、数量、单价、总价、交期等参考每次采购相应订单、发票及装运单,发票的填开单位必须与本合同中卖方的名称相一致。
英文合同4篇_合同范本
英文合同4篇深圳对外贸易货物进口合同(中英文对照)(官方范本)合同编号:_________________contract no:_______________签订日期:_________________date:______________________签订地点:_________________signed at : _______________电话:____________________tel: ______________________传真:____________________fax:_______________________电报:____________________cable: ____________________电传:____________________telex: ____________________电话:____________________tel: ______________________传真:____________________fax:_______________________电报:_____________________cable: ____________________电传:_____________________telex: ____________________经买双方确认根据下列条款订立本合同:the undersigned sellers and buyers have confirmed this contract in accordance with the terms and conditions stipulated below :1. 货号art no. 名称及规格descriptions 单位unit 数量quantity 单价unit price 金额amount合计:_________________totally:______________总值(大写):_____________________total value:(in words)_____________允许溢短____%。
英文合同范文模板大全8篇
英文合同范文模板大全8篇篇1合同协议范本合同编号:XXX/YYYY/ZZZ甲方(甲方公司名称):_________________________地址:_______________________________________法定代表人:_______________________________联系方式:_______________________________电子邮箱:_______________________________乙方(乙方公司名称):_________________________地址:_______________________________________法定代表人:_______________________________联系方式:_______________________________电子邮箱:_________________________________鉴于甲、乙双方本着互惠互利、合作共赢的原则,经过友好协商,就____________(项目名称)相关事宜达成如下协议,以兹信守。
一、合同宗旨和目的甲乙双方同意,通过本次合作,共同实现____________的目标。
为此,双方根据各自的优势和资源,共同合作,确保合同的顺利执行和项目的成功实施。
二、合同的范围和合作期限本合同的范围是____________。
合作期限自合同签订之日起至____________止。
三、各方的权利和义务(一)甲方的权利和义务1. 甲方有权获得合作带来的预期利益。
2. 甲方应按时履行合同中规定的各项义务。
3. 甲方应提供必要的技术支持和人员配合,确保项目顺利进行。
4. 甲方有权对项目执行情况进行监督和检查。
(二)乙方的权利和义务1. 乙方有权获得合作带来的预期利益。
2. 乙方应按时履行合同中规定的各项义务。
3. 乙方应确保所提供的产品和服务符合合同约定的质量要求。
英文合同范本
英文合同范本在国际商务活动和跨国交易中,英文合同起着至关重要的作用。
它不仅明确了各方的权利和义务,还为合作提供了法律保障。
一份清晰、准确、全面的英文合同能够有效地避免纠纷,促进交易的顺利进行。
下面为您提供一份较为常见的英文合同范本,供您参考。
合同名称:Purchase and Sale Agreement(购销合同)合同编号:_____日期:_____甲方(卖方):Name: _____Address: _____Telephone Number: _____Fax Number: _____Email Address: _____乙方(买方):Name: _____Address: _____Telephone Number: _____Fax Number: _____Email Address: _____1、商品描述(Description of Goods)The Seller agrees to sell and the Buyer agrees to purchase the following goods:Product Name: _____Model Number: _____Quantity: _____Unit Price: _____Total Price: _____The goods shall conform to the specifications and quality standards as agreed upon by both parties2、交货方式与时间(Delivery Method and Time)The Seller shall deliver the goods to the Buyer at the following address:Delivery Address: _____The delivery time shall be on or before delivery date3、付款方式(Payment Method)The Buyer shall make payment to the Seller in the following manner:Payment Method: _____Payment Due Date: _____4、质量保证与售后服务(Quality Assurance and AfterSales Service)The Seller warrants that the goods are of good quality and free from defects for a period of warranty period from the date of deliveryIn the event of any quality issues during the warranty period, the Seller shall be responsible for repairing or replacing the goods at no additional cost to the Buyer5、知识产权(Intellectual Property Rights)Both parties agree to respect the intellectual property rights of each other and not to infringe upon any patents, trademarks, copyrights or other intellectual property rights related to the goods or the transaction6、违约责任(Liability for Breach of Contract)If either party fails to perform its obligations under this contract, it shall be liable for the resulting losses and damages suffered by the other party The liability for breach of contract shall be limited to the amount of the contract and shall not include any indirect or consequential damages7、争议解决(Dispute Resolution)In the event of any dispute arising out of or in connection with this contract, the parties shall first attempt to resolve the dispute through friendly negotiation If the negotiation fails, the dispute shall be submitted to arbitration in accordance with the rules of arbitration institution8、法律适用(Governing Law)This contract shall be governed by and construed in accordance with the laws of jurisdiction9、其他条款(Miscellaneous Provisions)This contract constitutes the entire agreement between the parties and supersedes all prior negotiations, representations and agreementsAny amendments or additions to this contract shall be in writing and signed by both partiesThis contract is made in duplicate, with each party holding one copyIt is important to note that this is a basic template and may need to be customized and modified based on the specific nature and requirements of the transaction Legal advice from a qualified professional is recommended before entering into any contractual agreementThe above范本只是一个简单的示例,实际的英文合同可能会因行业、交易的复杂性和具体的法律要求而有所不同。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
买方 The Buyer:地址 AddressTel: Fax:卖方 The Seller:地址: AddressTel: Fax:本合同由买卖双方订立,根据本合同规定的条款,买方同意购买,卖方同意出售下述商品:This Contract is made by and between the Buyers and Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned commodity according to the terms and conditions stipulated below:(1) 货名及规格 Commodity & Specification(2) 数量 Qty.(3) 单价 Unit Price(4) 总价Total Amount(5) 原产公司:COUNTRY OF ORIGIN :(6) 装运期限:TIME OF SHIPMENT:(7) 装运口岸:PORT OF SHIPMENT:(8) 到货目的地:DESTINATION:(9) 保险: INSURANCE:由卖方按合同金额110%投保一切险和战争险All Risks and War Risk for 110% contract value to be covered by the Seller.(10) 运输方式:TERM OF SHIPMENT: 空运 By air(11) 包装:PACKING:须用坚固的新木箱包装,适合长途空运/陆运,防湿、防潮、防震、防锈、耐粗暴搬运。
由于包装不良所发生的损失,由于采用不充分或不妥善的防护措施而造成的任何锈损、破损,卖方应负担由此而产生的一切费用和损失。
包装箱内应包含一整套服务操作手册。
卖方使用的木质包装应经薰蒸处理,并在木质包装表面标上清晰的IPPC标识。
To be packed in new strong wooden case(s) suitable for long distance air/land transportation and well protected from dampness, moisture, shock, rust and rough handling. The Sellers shall be liable for any damage to the goods on account of improper packing and for any rust damage and break damage attributable to inadequate or improper protective measures taken by the Sellers, and in such case or cases any and all losses and / or expenses incurred in consequence thereof shall be borne by the Sellers. One full set of service and operation manuals concerned shall be enclosed in the case(s). The wood packaging the Seller used shall be fumigated and marked with “IPPC” on the surface of wood packaging.(12) 唛头:SHIPPING MARK:卖方应在每件包装上,用不褪色油墨清楚地标刷件号、尺码、毛重、净重、“此端向上”、“小心轻放”、“切勿受潮”等字样,并刷有下列唛头:On the surface of each package, the package number, measurements, gross weight, net weight, the lifting positions, such cautions as “THIS SIDE UP”, “HANDLE WITH CARE”,“KEEP AWAY FROM MOISTURE” and the following shipping mark:(13) 付款条件:TERMS OF PAYMENT:100%的合同金额通过电汇支付。
100% contract value by T/T.买方在合同生效后两周内支付合同金额的100%货款The Buyer shall pay 100% advance payment to the Seller within two week after contract effected.(14) 单据:Documents,1. 正本空运单(收货人联),标明“运费已付”及唛头,买方为收货人及通知方。
Original Airway Bill (copy for Consignee) marked “freight prepaid” and shipping mark, consign to and notify the Buyer.2. 涵盖100%合同金额的商业发票三正三副,注明合同号、唛头。
Commercial invoice covering 100% of contract amount in 3 originals and 3 copies, indicating contract number, shipping mark.3. 装箱单三正三副,注明毛、净重、尺码和所装货物的包装形式及数量。
Detailed Packing List in 3 originals and 3 copies indicating both gross and net weights, measurements and packing condition and quantity of each item packed.4. 卖方出具的质量及数量证书正本三份。
Certificate of quality and quantity issued by seller in 3 originals.5. 卖方出具的原产地证书一正一副。
Certificate of origin in 1 original and 1 copy issued by Seller.6. 货物装运后24小时内卖方发给买方装运通知传真复印件一份。
Copy of fax from seller to the buyer advising the particulars of shipment within 24 hours after shipment is made.7. 保险单或保险证明一正一副,按照合同金额110%投保一切险及战争险。
Insurance Policy or Certificate for 110% contract value, covering All Risks and War Risk in 1 original and 1 copy.8. 卖方声明外包装表面标有IPPC标识证书正本一份, 或卖方出具的非木质包装证明正本Seller’s Certificate in 1 original certifying IPPC has been marked on surface of the wooden cases / seller’s Certificate certifying no wood package is used in the shipment.(15) 装运通知:SHIPPING ADVICE:The Sellers shall fax to the Buyer the Readiness Notification one week before the goods to be shipped.卖方在发货前一周物向买方传真货物备妥通知。
The Sellers shall, immediately upon the completion of the loading of the goods in 24 hours, send the Buyers Air Waybill, Invoice and Packing list by fax.装运通知:卖方应在货物装运完毕后24小时内用传真将空运单、发票和装箱单发给买方。
如卖方未按时向买方通知上述装运情况所导致损失由卖方承担。
Losses shall be borne by the Sellers in case the Sellers don’t inform the Buyers of the above shipping status on time.(16) 质量保证:GUARANTEE OF QUALITY:卖方保证订货系用最上等的材料和头等工艺制成,全新的,未曾使用过的, 并完全符合本合同规定的质量、规格和性能。
卖方并保证本合同订货在正确安装、正常使用和维修的情况下,自安装之日起十二个月或货物装运之日起十五个月内运转良好,以先到期者为准。
由于人为造成的、易损易磨件除外。
The Sellers shall guarantee that for a period of 12 months calculated from the date of installation or 15 months starting from the date of shipment, whichever is the earlier. Faults due to mal-operation as well as wear and tear parts are excluded.(17) 迟交货及罚款:LATE DELIVERY AND PENALTY除合同第16条人力不可抗拒事故外,如卖方不能按合同规定的时间交货,买方应同意卖方支付罚款的条件下延期交货。
罚款可由议付银行在议付货款时扣除,罚款率按每7天收0.5%,不足7天时以7天计算。
但罚款不得超过迟交货物总价的5%。
如卖方延期交货超过合同规定10周时,买方有权撤消合同,此时,卖方仍应不迟延地按上述规定向买方支付罚款。
买方有权对因此遭受的其它损失向卖方提出索赔。
Should the Sellers fail to make delivery on time as stipulated in the Contract, with the exception of Force Major causes specified in Clause 16 of this Contract, the Buyers shall agree to postpone the delivery on condition that the Sellers agree to pay a penalty which shall be deducted by the paying bank from the payment under negotiation. The penalty, however, shall not exceed 5% of the total value of the goods involved in the late delivery, the rate of penalty is charged at 0.5% for every seven days, odd days less than seven days should be counted as seven days. In case the Sellers fail to make delivery ten weeks later than the time of shipment stipulated in the Contract, the Buyers shall have the right to cancel the contract and the Sellers, in spite of the cancellation, shall still pay the aforesaid penalty to the Buyers without delay. The buyer shall have the right to lodge a claim against the seller for the losses sustained if any.(18) 检验和索赔: INSPECTION AND CLAIMS:如发现货物的品质、数量/重量与本合同不符, 买方有权在货物到达目的地后60天内根据中华人民共和国出入境检验检疫局出具的商检证书向卖方提出索赔。