SICK光电

19) A = supply connections reverse polarity protected
B = outputs short-circuit protected C = interference suppression 10) Do not distort cable below 0 °C
3
4
5
SENSICK 9
Scanning range 0 ... 4 m
Photoelectric reflex switch
Red-light emitter LED as alignment aid Switching frequency 800/s Outputs short-circuit protected Sensitivity adjustment using the Teach-In procedure
Operating range 0 ... 3 m 0 ... 2 m 0 ... 0.6 m
* 100 x 100 mm2
Function reserve
100
1 10
2
1 (m)
3
1
2
WL 9-2
Ordering information
Type
Order no.
WL 9-2P130
1 018 281
WL 9-2P430
1 018 283
WL 9-2N130
1 018 282
WL 9-2N430
1 018 284
WL 9-2P330
1 019 024
WL 9-2P630
1 019 268
WL 9-2N330
1 019 511
Operating range
Limiting scanning range
Weight with connection cable 2 m/120 mm with equipment plug M 12/M 8, 4 pin
4 m/PL 80 A DC 10 ... 30 V ≤ 5 VPP ≤ 30 mA LED, visible red light 4) 2.5° 120 x 120 mm at a distance of 3 m PNP NPN VS – 2.9 V VS Approx. 0 V ≤ 2.9 V ≤ 100 mA ≤ 625 µs 800/s Connection cable, 2 m Cable, 120 mm, with plug M 12, 4 pin Plug M 12, 4 pin Plug M 8, 4 pin
III IP 67 A, B, C Operation –40 ... +60 °C Storage –40 ... +75 °C
Approx. 80 g Approx. 20 g
1) Limit values 2) Must be within VS tolerances 3) Without load
Dimension illustration 11
22
12
3
3
1.5
3
1
2
20
40
2
29.5
Fra Baidu bibliotek
Without setting options
WL 9-2P130
WL 9-2P330
WL 9-2P430
WL 9-2P630
WL 9-2N130
WL 9-2N330
WL 9-2N430
3
4
1 Middle of optic axis 2 Mounting hole Ø 3.2 mm 3 LED signal strength indicator 4 Plug M 12 or M 8, 4 pin,
19) A = supply connections reverse polarity protected
B = outputs short-circuit protected C = interference suppreasion 10) Do not distort cable below 0 °C
4 pin, M 12 with 120 mm cable
brn 1 L+ blk 4 Q wht 2 Q blu 3 M
Technical data
WL 9-2 P130 P430 N130 N430 P330 P630 N330
Scanning range typ. max./on reflector Supply voltage VS1) Ripple 2) Current consumption 3) Light source Angle of dispersion Light spot diameter Switching outputs Q and Q–
room temperature 100,000 h at TU = +25 °C
5) At TU = +25 °C and 100 mA output current
6) With resistive load 7) With light/dark ratio 1:1 8) Withstand voltage 50 V
Signal voltage HIGH
Signal voltage LOW 5)
Output current IA max. Response time 6) Max. switching frequency 7) Connection technology
VDE protection class M 12 8) VDE protection class M 8 Protection type Protection circuits 9) Ambient temperature 10)
Weight with connection cable 2 m/120 mm with equipment plug M 12/M 8, 4 pin
4 m/PL 80 A DC 10 ... 30 V ≤ 5 VPP ≤ 30 mA LED, visible red light 4) 2.5° 120 x 120 mm at a distance of 3 m PNP NPN VS – 2.9 V VS Approx. 0 V ≤ 2.9 V ≤ 100 mA ≤ 625 µs 800/s Connection cable, 2 m Cable, 120 mm, with plug M 12, 4 pin Plug M 12, 4 pin Plug M 8, 4 pin
Scanning range 0 ... 4 m
Photoelectric reflex switch
Red-light emitter LED as alignment aid Switching frequency 800/s Outputs short-circuit protected
WL 9-2 Photoelectric Reflex Switch, Basic Type
brn
L+
blk
Q
wht
Q
blu
M
4 pin, M 8
brn 1 L+ blk 4 Q wht 2 Q blu 3 M
4 pin, M 12
brn 1 L+ blk 4 Q wht 2 Q blu 3 M
4 pin, M 12 with 120 mm cable
brn 1 L+ blk 4 Q wht 2 Q blu 3 M
Teach-In function
4) Average service life at room temperature 100,000 h at TU = +25 °C
5) At TU = +25 °C and 100 mA output current
6) With resistive load 7) With light/dark ratio 1:1 8) Withstand voltage 50 V
2 m connection cable or 120 mm cable with plug M 12, 4 pin
Accessories Connectors Mounting systems Reflectors
8 SENSICK
Connection type WL 9-2P130 WL 9-2N130
5
Connection type WL 9-2P131 WL 9-2N131
WL 9-2P331
WL 9-2P431 WL 9-2N431
WL 9-2P631
Accessories Connectors Mounting systems Reflectors
10 SENSICK
4 x 0.14 mm2
Programming via Teach-In button. Simple programming: Position reflector in the beam and push the button: finished; LED confirms the Teach-In procedure. Teach-In values can be stored.
Signal voltage HIGH
Signal voltage LOW 5)
Output current IA max. Response time 6) Max. switching frequency 7) Connection technology
VDE protection class M 12 8) VDE protection class M 8 Protection type Protection circuits 9) Ambient temperature 10)
WL 9-2
Scanning range
10 20 30
3.0
4.0
2.0
3.0
0.6/1.0
0 (m) 1
2
Operating range
3
4
5
Scanning range typ. max.
Reflector type
1 PL 80 A
2 PL 40 A
3 Reflective tape Diamond Grade*
WL 9-2 Photoelectric Reflex Switch, Teach-In
Dimension illustration 11
22
12
3
3
1.5
3
1
2
20
40
2
29.5
Setting options WL 9-2P131 WL 9-2P431 WL 9-2N131 WL 9-2N431
WL 9-2P331 WL 9-2P631
III IP 67 A, B, C Operation –40 ... +60 °C Storage –40 ... +75 °C
Approx. 80 g Approx. 20 g
1) Limit values 2) Must be within VS tolerances 3) Without load 4) Average service life at
3
4
1 Middle of optic axis 2 Mounting hole Ø 3.2 mm 3 LED signal strength indicator 4 Plug M 12 or M 8, 4 pin,
2 m connection cable or 120 mm cable with plug M 12, 4 pin 5 Teach-In button
WL 9-2P330 WL 9-2N330
WL 9-2P430 WL 9-2N430
WL 9-2P630
4 x 0.14 mm2
brn
L+
blk
Q
wht
Q
blu
M
4 pin, M 8
brn 1 L+ blk 4 Q wht 2 Q blu 3 M
4 pin, M 12
brn 1 L+ blk 4 Q wht 2 Q blu 3 M
WL 9-2
Technical data
WL 9-2 P131 P431 N131 N431 P331 P631
Scanning range typ. max./on reflector Supply voltage VS1) Ripple 2) Current consumption 3) Light source Angle of dispersion Light spot diameter Switching outputs Q and Q–
Scanning range
10 20 30
3.0