LTE实训报告

成绩

重庆邮电大学通信与信息工程学院移动通信综合实训报告

专业

班级

学号

姓名

实验时间：

重庆邮电大学通信与信息工程学院通信技术与网络实验中心制

一、实验题目

LTE无线侧综合实验

二、实验目的

1.熟悉LTE网络结构

2.了解和学习华为eNodeB设备DBS3900系统功能

3.掌握华为TDD-LTE的eNodeB数据配置方法

4.获得通信网络工程的实际应用技能

三、实验内容

数据脚本：

MOD ENODEB: ENODEBID=101, NAME="cytx", ENBTYPE=DBS3900_LTE, LOCATION="cyyfl", PROTOCOL=CPRI; LST ENODEB:;

ADD CNOPERATOR: CnOperatorId=1, CnOperatorName="cytx", CnOperatorType=CNOPERATOR_PRIMARY, Mcc="460", Mnc="02";

ADD CNOPERATORTA: TrackingAreaId=1, CnOperatorId=1, Tac=100;

ADD BRD: CN=0, SRN=0, SN=6, BT=UMPT;

ADD BRD: CN=0, SRN=0, SN=18, BT=UPEU;

ADD BRD: CN=0, SRN=0, SN=19, BT=UPEU;

ADD BRD: CN=0, SRN=0, SN=2, BT=LBBP, WM=TDD;

ADD BRD: CN=0, SRN=0, SN=16, BT=FAN;

DSP BRD:;

ADD RRUCHAIN: RCN=0, TT=CHAIN, AT=LOCALPORT, HCN=0, HSRN=0, HSN=2, HPN=0, CR=9.8;

ADD RRU: CN=0, SRN=60, SN=0, TP=TRUNK, RCN=0, PS=0, RT=MRRU, RN="xinke", ALMPROCSW=ON, ALMPROCTHRHLD=30, ALMTHRHLD=20, RS=TDL, RXNUM=1, TXNUM=1;

ADD GPS: GN=0, CN=0, SRN=0, SN=6, CABLETYPE=COAXIAL, CABLE_LEN=20, MODE=GPS, PRI=4;

SET CLKMODE: MODE=AUTO;

SET CLKSYNCMODE: CLKSYNCMODE=TIME;

ADD ETHPORT: CN=0, SRN=0, SN=6, SBT=BASE_BOARD, PN=0, PA=COPPER, MTU=1500, SPEED=100M, ARPPROXY=DISABLE, FC=CLOSE, FERAT=10, FERDT=8, DUPLEX=FULL;

ADD DEVIP: CN=0, SRN=0, SN=6, SBT=BASE_BOARD, PT=ETH, PN=0, IP="110.110.110.3", MASK="255.255.255.0";

ADD IPRT: CN=0, SRN=0, SN=6, SBT=BASE_BOARD, DSTIP="134.134.134.10", DSTMASK="255.255.255.0", RTTYPE=NEXTHOP, NEXTHOP="110.110.110.1", PREF=60, DESCRI="TO MME";

ADD IPRT: CN=0, SRN=0, SN=6, SBT=BASE_BOARD, DSTIP="135.135.135.10", DSTMASK="255.255.255.0", RTTYPE=NEXTHOP, NEXTHOP="110.110.110.1", PREF=60, DESCRI="TO SGW";

ADD IPRT: CN=0, SRN=0, SN=6, SBT=BASE_BOARD, DSTIP="172.100.100.16", DSTMASK="255.255.255.0", RTTYPE=NEXTHOP, NEXTHOP="110.110.110.1", PREF=60, DESCRI="TO OMC";

LST IPRT:;

ADD S1SIGIP: CN=0, SRN=0, SN=6, S1SIGIPID="TO MME", LOCIP="110.110.110.3", LOCIPSECFLAG=DISABLE, SECLOCIP="0.0.0.0", SECLOCIPSECFLAG=DISABLE, LOCPORT=3000, RTOMIN=1000, RTOMAX=3000, RTOINIT=1000, RTOALPHA=12, RTOBETA=25, HBINTER=5000, MAXASSOCRETR=10, MAXPATHRETR=5, CHKSUMTX=DISABLE, CHKSUMRX=DISABLE, CHKSUMTYPE=CRC32, SWITCHBACKFLAG=ENABLE,

SWITCHBACKHBNUM=10, TSACK=200, CNOPERATORID=1;

ADD MME: MMEID=0, FIRSTSIGIP="134.134.134.10", FIRSTIPSECFLAG=DISABLE, SECSIGIP="0.0.0.0", SECIPSECFLAG=DISABLE, LOCPORT=3000, CNOPERATORID=1, MMERELEASE=Release_R8;

ADD S1SERVIP: CN=0, SRN=0, SN=6, S1SERVIPID="TO SGW", S1SERVIP="110.110.110.3", IPSECFLAG=DISABLE, PATHCHK=DISABLE, CNOPERATORID=1;

ADD SGW: SGWID=0, SERVIP1="135.135.135.10", SERVIP1IPSECFLAG=DISABLE, SERVIP2="0.0.0.0", SERVIP2IPSECFLAG=DISABLE, SERVIP3="0.0.0.0", SERVIP3IPSECFLAG=DISABLE, SERVIP4="0.0.0.0", SERVIP4IPSECFLAG=DISABLE, CNOPERATORID=1;

ADD OMCH: FLAG=MASTER, IP="110.110.110.3", MASK="255.255.255.0", PEERIP="172.100.100.16", PEERMASK="255.255.255.0", BEAR=IPV4, CN=0, SRN=0, SN=6, SBT=BASE_BOARD, BRT=NO;

ADD VLANMAP: NEXTHOPIP="110.110.110.1", MASK="255.255.255.0", VLANMODE=SINGLEVLAN, VLANID=100, SETPRIO=DISABLE;

ADD SECTOR: SECN=0, GCDF=DEG, LONGITUDE=0, LATITUDE=0, SECM=NormalMIMO, ANTM=1T1R, COMBM=COMBTYPE_SINGLE_RRU, SECTORNAME="SHANQU", ALTITUDE=25, UNCERTSEMIMAJOR=3, UNCERTSEMIMINOR=3, ORIENTOFMAJORAXIS=0, UNCERTALTITUDE=3, CONFIDENCE=0, OMNIFLAG=FALSE, CN1=0, SRN1=60, SN1=0, PN1=R0A;

ADD CELL: LocalCellId=0, CellName="CYTX", SectorId=0, CsgInd=BOOLEAN_FALSE, UlCyclicPrefix=NORMAL_CP, DlCyclicPrefix=NORMAL_CP, FreqBand=39, UlEarfcnCfgInd=NOT_CFG, DlEarfcn=38250, UlBandWidth=CELL_BW_N100, DlBandWidth=CELL_BW_N100, CellId=0, PhyCellId=99, AdditionalSpectrumEmission=1, FddTddInd=CELL_TDD, SubframeAssignment=SA2, SpecialSubframePatterns=SSP5, CellSpecificOffset=dB0, QoffsetFreq=dB0, RootSequenceIdx=1, HighSpeedFlag=LOW_SPEED, PreambleFmt=0, CellRadius=10000, CustomizedBandWidthCfgInd=NOT_CFG, EmergencyAreaIdCfgInd=NOT_CFG, UePowerMaxCfgInd=NOT_CFG, MultiRruCellFlag=BOOLEAN_FALSE, CPRICompression=NO_COMPRESSION;

ADD CELLOP: LocalCellId=0, TrackingAreaId=1, CellReservedForOp=CELL_NOT_RESERVED_FOR_OP, OpUlRbUsedRatio=25, OpDlRbUsedRatio=25;

ACT CELL: LocalCellId=0;

第二次数据：