华为QUIDWAY S3700密码清除-原创
合集下载
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Recover configuration...OK!
Press ENTER to get started.
重启完毕，回车后要求配置登陆密码（密码也有复杂性要求的，如不符合会提示）
Please configure the login password (6-16)
Enter Password:
Confirm Password:
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %@%@5d~9:M^ipCfL\iB)EQd>3Uwe%@%@
local-user admin service-type http
System reboot at 00:09:15
BIOS LOADING ...
Copyright (c) 2008-2011 HUAWEI TECH CO., LTD.
(Ver349, Mar 15 2013, 11:00:55)
Press Ctrl+B to enter BOOTROM menu ... 2
4. Enter ethernet submenu
5. Enter filesystem submenu
6. Modify BOOTROM password
7. Clear password for console user
8. Reboot
Enter your choice(1-8):7
选择7，清除CONSOLE密码
Note: Clear password for console user? Yes or No(Y/N):y
Clear password for console user successfully. Choose "1" to boot, then set a new password.
Note: Do not choose "8. Reboot" or power off the device, otherwise this operation will not take effect.
sysname Quidway
#
vlan batch 2 10 20 30
#
undo http server enable
undo http secure-server enable
#
a来自百度文库a
authentication-scheme default
authorization-scheme default
#
interface Vlanif2
ip address 192.168.20.3 255.255.255.0
#
检查下配置没有被清除，如上图粗体部分所示。我的交换机软件版本如下：，
[Quidway]dis ver
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.70 (S3700 V100R006C05)
显示到此处时，按CTRL+B进入BOOTROM
password:
输入BOOTROM密码，此处的密码为Admin@huawei.com
早期版本的为huawei
BOOTROM MENU
1. Boot with default mode
2. Enter serial submenu
3. Enter startup submenu
4 -rw- 1,501 Jan 01 2008 00:48:59 backup.cfg
5 -rw- 609 Jan 01 2008 00:49:44 vrpcfg.zip
6 -rw- 0 Jan 01 2008 00:49:20 config.cfg
7 -rw- 1,510 Jan 01 2008 00:08:10 huawei.cfg
5. Enter filesystem submenu
6. Modify BOOTROM password
7. Clear password for console user
8. Reboot
Enter your choice(1-8):1
选择1并回车，交换机重新启动
Decompressing Image file ... done
Copyright (C) 2003-2013 HUAWEI TECH CO., LTD
Quidway S3700-28TP-EI-AC Routing Switch uptime is 0 week, 0 day, 0 hour, 3 minutes
EOFEA 0(Master) : uptime is 0 week, 0 day, 0 hour, 2 minutes
<Quidway>reboot
Info: The system is now comparing the configuration, please wait.
System will reboot! Continue?[Y/N]:y
Jan 1 2008 00:09:13+08:00 Quidway %%01CMD/4/REBOOT(l)[1]:The user chose Y when deciding whether to reboot the system.
Info: system is rebooting ,please wait...
Jan 1 2008 00:09:14+08:00 Quidway %%01SRM/4/MSTRSCURST(l)[2]:Master SCU is reset.
Jan 1 2008 00:09:14+08:00 Quidway %%01SRM/4/ResetReason(l)[3]: Board reset by VRP command or net manager .
注意看清上面的提示，选择1为缺省启动，选择8为REBOOT(PS:第一次做时，担心选1会清掉配置，选了8,所以失败了)
BOOTROM MENU
1. Boot with default mode
2. Enter serial submenu
3. Enter startup submenu
4. Enter ethernet submenu
华为QUIDWAY S3700密码清除
废话不多说，直接步入主题，我的交换机软件版本为：
Software Version : VRP (R) Software, Version 5.70 (V100R006C05)
各位看官请自行注意，比这个早的可以要先传个空的a.cfg文件上去，然后去选择启动文件。
一、重启交换机（除标红部分外其余均为交换机显示内容）
CFM_Init begin...................OK
CLI_CmdInit begin................OK
VRP_RegestAllLINKCmd begin.......OK
create task begin................
task init begin...
<Quidway><Quidway>system-view
Enter system view, return user view with Ctrl+Z.
[Quidway]dis cu
[Quidway]dis current-configuration
#
!Software Version V100R006C05
There is no record in region Exception.
Initialize FSP Task
PPI DEV SysInit..................OK
Hard system init.................OK
Begin to start the system, please waiting ......
1 -rw- 8,829,764 Jan 01 2008 00:02:10 S3700-28TP-EI-V100R006C05.CC
2 -rw- 952 Jan 01 2008 00:14:46 private-data.txt
3 drw- - Jan 01 2008 00:03:37 resetinfo
14,632 KB total (4,572 KB free)
<Quidway>
可以看到有一个大小为0Byte的config.cfg文件，应该就是之前老版本要求上传的空的配置文件，huawei.cfg应该是正常引导时运行的配置文件。
好了，密码清除完美完成了。
以上为个人原创，真实机器验证，绝非CTRL+C、CTRL+V作品。
[Quidway]quit
再看一下文件的情况
<Quidway>dir
Directory of flash:/
Idx Attr Size(Byte) Date Time(LMT) FileName
0 -rw- 1,358,320 Jan 01 2008 00:01:25 S3700-28TP-EI-V100R006C05.WEB.ZIP
128M bytes DDR Memory
16M bytes FLASH
Pcb Version : VER B
Basic BOOTROM Version : 349 Compiled at Mar 15 2013, 11:00:55
Software Version : VRP (R) Software, Version 5.70 (V100R006C05)
VOS VFS init.....................OK
Startup File Check...............OK
VOS monitor init.................OK
CFM init advance.................OK
PAT init ........................OK
HA S2M init......................OK
VOS VFS init hind ...............OK
VRP_Root begin...
VRP_InitializeTask begin...
Init the Device Link.............OK
CFG_PlaneInit begin..............OK
Press ENTER to get started.
重启完毕，回车后要求配置登陆密码（密码也有复杂性要求的，如不符合会提示）
Please configure the login password (6-16)
Enter Password:
Confirm Password:
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher %@%@5d~9:M^ipCfL\iB)EQd>3Uwe%@%@
local-user admin service-type http
System reboot at 00:09:15
BIOS LOADING ...
Copyright (c) 2008-2011 HUAWEI TECH CO., LTD.
(Ver349, Mar 15 2013, 11:00:55)
Press Ctrl+B to enter BOOTROM menu ... 2
4. Enter ethernet submenu
5. Enter filesystem submenu
6. Modify BOOTROM password
7. Clear password for console user
8. Reboot
Enter your choice(1-8):7
选择7，清除CONSOLE密码
Note: Clear password for console user? Yes or No(Y/N):y
Clear password for console user successfully. Choose "1" to boot, then set a new password.
Note: Do not choose "8. Reboot" or power off the device, otherwise this operation will not take effect.
sysname Quidway
#
vlan batch 2 10 20 30
#
undo http server enable
undo http secure-server enable
#
a来自百度文库a
authentication-scheme default
authorization-scheme default
#
interface Vlanif2
ip address 192.168.20.3 255.255.255.0
#
检查下配置没有被清除，如上图粗体部分所示。我的交换机软件版本如下：，
[Quidway]dis ver
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.70 (S3700 V100R006C05)
显示到此处时，按CTRL+B进入BOOTROM
password:
输入BOOTROM密码，此处的密码为Admin@huawei.com
早期版本的为huawei
BOOTROM MENU
1. Boot with default mode
2. Enter serial submenu
3. Enter startup submenu
4 -rw- 1,501 Jan 01 2008 00:48:59 backup.cfg
5 -rw- 609 Jan 01 2008 00:49:44 vrpcfg.zip
6 -rw- 0 Jan 01 2008 00:49:20 config.cfg
7 -rw- 1,510 Jan 01 2008 00:08:10 huawei.cfg
5. Enter filesystem submenu
6. Modify BOOTROM password
7. Clear password for console user
8. Reboot
Enter your choice(1-8):1
选择1并回车，交换机重新启动
Decompressing Image file ... done
Copyright (C) 2003-2013 HUAWEI TECH CO., LTD
Quidway S3700-28TP-EI-AC Routing Switch uptime is 0 week, 0 day, 0 hour, 3 minutes
EOFEA 0(Master) : uptime is 0 week, 0 day, 0 hour, 2 minutes
<Quidway>reboot
Info: The system is now comparing the configuration, please wait.
System will reboot! Continue?[Y/N]:y
Jan 1 2008 00:09:13+08:00 Quidway %%01CMD/4/REBOOT(l)[1]:The user chose Y when deciding whether to reboot the system.
Info: system is rebooting ,please wait...
Jan 1 2008 00:09:14+08:00 Quidway %%01SRM/4/MSTRSCURST(l)[2]:Master SCU is reset.
Jan 1 2008 00:09:14+08:00 Quidway %%01SRM/4/ResetReason(l)[3]: Board reset by VRP command or net manager .
注意看清上面的提示，选择1为缺省启动，选择8为REBOOT(PS:第一次做时，担心选1会清掉配置，选了8,所以失败了)
BOOTROM MENU
1. Boot with default mode
2. Enter serial submenu
3. Enter startup submenu
4. Enter ethernet submenu
华为QUIDWAY S3700密码清除
废话不多说，直接步入主题，我的交换机软件版本为：
Software Version : VRP (R) Software, Version 5.70 (V100R006C05)
各位看官请自行注意，比这个早的可以要先传个空的a.cfg文件上去，然后去选择启动文件。
一、重启交换机（除标红部分外其余均为交换机显示内容）
CFM_Init begin...................OK
CLI_CmdInit begin................OK
VRP_RegestAllLINKCmd begin.......OK
create task begin................
task init begin...
<Quidway><Quidway>system-view
Enter system view, return user view with Ctrl+Z.
[Quidway]dis cu
[Quidway]dis current-configuration
#
!Software Version V100R006C05
There is no record in region Exception.
Initialize FSP Task
PPI DEV SysInit..................OK
Hard system init.................OK
Begin to start the system, please waiting ......
1 -rw- 8,829,764 Jan 01 2008 00:02:10 S3700-28TP-EI-V100R006C05.CC
2 -rw- 952 Jan 01 2008 00:14:46 private-data.txt
3 drw- - Jan 01 2008 00:03:37 resetinfo
14,632 KB total (4,572 KB free)
<Quidway>
可以看到有一个大小为0Byte的config.cfg文件，应该就是之前老版本要求上传的空的配置文件，huawei.cfg应该是正常引导时运行的配置文件。
好了，密码清除完美完成了。
以上为个人原创，真实机器验证，绝非CTRL+C、CTRL+V作品。
[Quidway]quit
再看一下文件的情况
<Quidway>dir
Directory of flash:/
Idx Attr Size(Byte) Date Time(LMT) FileName
0 -rw- 1,358,320 Jan 01 2008 00:01:25 S3700-28TP-EI-V100R006C05.WEB.ZIP
128M bytes DDR Memory
16M bytes FLASH
Pcb Version : VER B
Basic BOOTROM Version : 349 Compiled at Mar 15 2013, 11:00:55
Software Version : VRP (R) Software, Version 5.70 (V100R006C05)
VOS VFS init.....................OK
Startup File Check...............OK
VOS monitor init.................OK
CFM init advance.................OK
PAT init ........................OK
HA S2M init......................OK
VOS VFS init hind ...............OK
VRP_Root begin...
VRP_InitializeTask begin...
Init the Device Link.............OK
CFG_PlaneInit begin..............OK