啤酒桶清洗机设计

毕业设计（论文）题目:啤酒桶清洗机设计

论文摘要

本设备是专为啤酒桶的清洗、消毒设计的。该设备可以自动完成

备压等全部工序。本设备适用桶的尺寸为高度清洗消毒及CO

2

H360—H560，直径Φ250—Φ500。本机主要由机架、电气控制箱、电磁阀、气动元件、气冲系统和水路系统组成。本机控制单元采用以三菱公司的可编程控制器为核心对机器进行全过程控制。由于可编程控制器在工业控制方面的应用意义日趋明显，已在机械制造、发电、化工、电子等行业工艺设备的电气控制方面得到了广泛的应用。它具有功能强大、使用可靠、维修简单等许多优点，并且在很多地方已逐步取代了继电器电路的逻辑控制。本文讨论的是PLC在实际工业控制系统的应用。

关键词：

ＰＬＣ管路系统清洗机

Abstract

This equipment designed for cleaning and sterilizing casks. The equipment is automatic. The key processes contain discharging remnants, swilling with water, swilling with disinfectant, swilling with aseptic water and inflating with CO2. The height of cask is 360—560.The diameter is 250—500. The equipment is made of chassis, control unit, electromagnetic valve and piping. The center of manipulative unit is the MITSUBISHI PLC. PLC controls all of the running processes. Applied meaning that programmable logic controller have in its control the aspect in the industry gradually obvious, combine at manufacture，generate electricity, chemical engineering, electr

onics etc profession craft the equipment's electricity control the aspect got the extensive application. It have the function strong and big, the usage is dependable, maintain the many advantage of simple etc., and already and gradually replaced after the logic control of the electric appliances electric circuit in a lot of places. But what the text discussion is a PLC in the actual industry to control the system's application.

Key Words:

PLC Piping Cleaning Machine

目录

论文摘要....................................................................................................................................... I 关键词：............................................................................................................................................. I ABSTRACT ..................................................................................................................................... II KEY WORDS: ................................................................................................................................. II 目录.......................................................................................................................................... I II 前言.................................................................................................................................................... V 第1章机器总体设计方案.. (6)

1.1清洗机的可行性报告. (6)

1.2清洗机的用途特点 (6)

1.2.1清洗机用途及使用范围 (6)

1.2.2啤酒桶简介 (6)

1.2.3清洗特点 (7)

1.3机器总体设计方案 (8)

第2章机架的设计 (10)

2.1焊接简介 (10)

2.1.1焊缝布置 (10)

2.1.2焊接方法的选择 (11)

2.1.3 焊接接头 (11)

2.2不锈钢简介 (11)

2.3机架的设计 (14)

第3章管路的设计 (19)

3.1管路的设计 (19)

3.2清洗头的设计 (19)

3.2.1.清洗头的受力分析： (20)

3.2.2弹簧的设计： (21)

3.3器件选型 (22)

3.3.1.选择液压泵，电机： (22)

3.3.2选择气缸： (23)

3.4水箱 (24)

第4章电路的设计 (28)

4.1电路设计 (28)