丙烯酸面漆

丙烯酸面漆

组成

丙烯酸面漆是由丙烯酸树脂，加入颜料、助剂和有机溶剂，经分散研磨制成。特性

本漆干燥快、硬度高、漆膜丰满、光亮，保光、保色性能好。具有优良的耐油性、耐水性及耐候性。

用途

主要用于大型工程设施、机械工程、农用机械及家电等金属表面的涂饰。

二、技术指标

试验项目要求指标试验方法光泽60º ≥85 GB1743

硬度≥0.5 GB1730

干燥时间表干，min 20 GB1728

实干，h 2

耐水性（24H）不起泡，不脱落GB1733

附着力（划圈）≤2 GB1720

施工参考

1.涂漆前先对被涂刷表面进行处理，要求达到无锈、无油污、无尘、无水痕。

2.要求施工环境无灰尘、有排风装置或吸尘设施，以保证施工质量。

3.施工前先将本品搅拌均匀，使用专业稀释剂，调至适合涂漆黏度后施工。

4.采用配套底漆可选用丙烯酸底漆、过氯乙烯底漆、环氧底或中涂漆。

5.采用各种单色漆调制各色复色漆时，要选用同类产品。

Acrylic Topcoat

Composition

Acrylic topcoat is composed of acrylic resin added pigments, additives and organic solvent and by dispersing and grinding.

Characteristics

This product has the characteristics of fast drying, high hardness, The film is full and bright. The performance of keep the luster and the color is good and shows good water resistance, good grease resistance, good weatherability. Uses

It is mainly used for metal surface finishing such as large engineering facilities, agricultural machinery, appliances

Technical indicator

Test Project Requirements Test method

glossiness

≥85GB1743 60º

hardness ≥0.5GB1730

Drying time Surface dry，min，20 GB1728

Actual drying，h 2

water resistance

No bubble,No loss GB1733 （24H）

Adhesion（circling）≤2GB1720