在线高压水自动清洗装置

HPC-2-High-Pressure-Cleaner System

The HPC-2 High Pressure Cleaner system is designed for applications that are prone to difficult to remove coatings and steam cleaning is not an option. The foundation for this system is a 5 HP 3-phase electric motor coupled to a positive-displacement plunger pump. A High Pressure Cleaner Adapter is used with a nozzle directed onto the sapphire prism of the sensing head. This configuration allows water to be pressurized over 2000psi (138bar) and forcing any contaminates off of the prism while the process is pressurized and flowing. The system injects less than 8 oz. (250cc) of water per second, and most applications only require 5 seconds per cleaning.

The pump and motor are mounted on a powder-coated mounting base and a starter for the motor is included.

Originally designed for green liquor applications in the paper industry and normally used in conjunction with our HPC-2 High Pressure Cleaning system, the High Pressure Cleaner Adapter can also be used in other applications that require frequent cleaning of difficult coatings without the use of steam. This adapter is designed so that a nozzle is installed across the process from the sensing head and is situated so that it directly sprays a stream of high-pressure water on the prism. The nozzle is completely removable so that it can be easily serviced or replaced if clogged.

The suggested orientation of the sensing head is on a horizontal plane for a horizontal segment of pipe. A vertical segment of pipe is also acceptable if the flow is in the upward direction. Maintenance plugs can also be installed for operation without the sensing head and/or cleaning nozzle installed.