JA02S(LED效率射灯驱动IC)pdf

合集下载

PerkinElmer ACULED LED 产品说明书

OverviewPerkinElmer’s ACULED – or All Color Ultrabright LED – is a multiuse, compact LED designed for operation in specialty lighting applications.Typical applicationsinclude mood lighting, indoor/ outdoor illumination, architecturalor stage lighting, automotiveinterior lighting and much more.The ACULED is a high-powerlight source utilizing multichip-on-board (COB) technology. The close chip placement achieves an exquisite white color mix. Excellent multi-color mixing isalso achievable by driving eachchip individually using one blue,one red, and two green power chips. Each color has a separate anode and cathode. The two green chips are serially connected; additional optics can be easily attached. The PerkinElmer ACULED boasts a compact size and superior optical design. In addition, the copper board provides for superior thermal conductivity.An Evaluation Kit is also available for testing.With global resources and manufacturing capabilities, PerkinElmer Elcos customers continue to benefit from the company’s years of experience and expertise in LED technology and specialty lighting applications. Features and BenefitsHigh-power light source utilizingmulti chip-on-board (COB) technology Superior brightness resulting fromexcellent quality LED chips andsuperior thermal managementCompact sizeExcellent color mixing achieved by a separate anode and cathode for each color (red, green, blue)Close individual chip placementto produce an exquisite whitecolor mixOne blue, one red and twogreen chips (green connectedserially)Lambertian emitter with120° apertureUp to 4.5 W electrical powerFully RoHS compliant and reflowsoldreableApplicationsHigh-power light source for general illuminationVision systemsArchitectural lightingMood lightingMedical lightingBacklightingDisplays and signsACULED®RGGBACL00-MC-GBGR-005-C02-L-0000 Superior brightness and excellent color mixing in a compact size, ACULED is truly“setting the mood” with illumination. Test it out with our Evaluation Kit.D A T A S H E E TTable of ContentsProduct Nomenclature 3 Average Lumen Maintenance Characteristics 3 Environmental Compliance 3 Ordering Information and Flux Characteristics 4 Table 1: Intensity Bins 4 Table 2: Wavelength Bins 4 Optical and Electronic Characteristics*** 4 Maximum Ratings at 25°C 5 Tables of Characteristics 5 Mechanical and Electrical Specification 7 Reliability Information 8 Soldering 9 Hand Soldering 9 Cautions 9 Notes 10 Packaging 10 Optics 11 Heat Sink Recommendations 11 ACULED Evaluation Kit 11 ACULED VHL™ – Very High Lumen for the ACULED 11 ACULED DYO™ – Flexibility to "Design-Your-Own" High Power LED 11Product NomenclatureETAverage Lumen Maintenance CharacteristicsTypically, the lifetime for solid-state lighting devices, or LEDs, is derived from thepercentage of initial light output that remains after a specific time period – generallyreferred to as lumen maintenance.PerkinElmer projects that ACULED® products, operating at a forward current of350 mA, will average 70% lumen maintenance after 30,000 hours of constant currentoperation with junction temperature maintained at or below 110° C.This performance is based on three criteria – independent test data, PerkinElmer historicaldata from tests run on similar material systems, and internal ACULED reliability testing.To achieve this level of lumen maintenance, all design limits included in this datasheetmust be adhered to carefully.Environmental CompliancePerkinElmer is proud of its commitment to providing the best in environmentally- friendlyproducts to customers in the solid state lighting market. The ACULED® is no exception –and complies with the European Union directives on the restriction of hazardoussubstances in electronic equipment as stated within the RoHS directive. The followingrestricted materials will not intentionally be added to the ACULED® – lead, mercury,cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominateddiphenyl ethers (PBDE).Ordering Information and Flux Characteristics Board temperature T B=25° CPart-Number Description Type Color Luminous Flux ΦV [lm]I F=350 mA Luminous Intensity I V [cd] I F=350 mAMin. Typ. Typ.E000986 ACULED GBGR ACL00-MC-GBGR-005-C02-L-N000 RedGreen1BlueTotal 6419574.79161.51 two chips in seriesTable 1: Intensity BinsBoard temperature T B = 25°C; I F = 350 mALuminous Flux ΦV [lm]Rank Min. Max.L 40 64M 51 81N 64 102O 81 128P 102 161Table 2: Wavelength BinsBoard temperature T B = 25°C; I F = 350 mADominant Wavelength λdom [nm]Rank Red Green Blue22 620-630 515-520 455-460Optical and Electronic Characteristics***Ambient temperature T A = 25°C, I F = 350 mAParameter Symbol Red Green Blue UnitLuminous flux* typ. ΦV22 60 4.8 lm Luminous flux** typ. ΦV19 57 4.7 lm Luminous intensity* typ. I V12 17 1.5 cd Luminous intensity** typ. I V9 16 1.5 cd Dominant wavelength*** typ. λdom625 518 458 nm Peak emission wavelength typ. λpeak638 513 452 nm Spectral half bandwidth typ. ∆λ20 35 25 nm Forward voltage per chip typ. V F 2.3 6.6 3.3 V Optical efficacy* typ. ηopt27 25 4 lm/W Optical efficacy** typ. ηopt24 25 4 lm/W Temperature coefficient for λdom typ. TC(λ dom)0.05 0.05 0.04 nm/K Temperature coefficient for λpeak typ. TC(λ peak) 0.14 0.04 0.05 nm/K Temperature coefficient for V f per chip typ. TC(Vf)- 2.6 - 4.4 - 4.3 mV/K Viewing angle at 50% typ. 2Ψ130 degree Radiating surface typ. A rad 1.0 2x1.0 1.0 mm2 Luminance* typ. 690 Cd/cm2 Luminance** typ. 600 Cd/cm2 Thermal resistance junction – board typ. R th JB 10 K/W* Values for junction temperature T J = 25°C** Values for board temperature of T B = 25°C*** For intensity rank N; all colors operated separatelyAdequate heat sink is required. Derating must be observed to maintain junction temperature below maximum.Maximum Ratings at 25°CTables of CharacteristicsTypical Spectral Distribution (I F = 350 mA, T B = 25°C)Color Coordinates ACULED® (CIE 1931)ParameterSymbol Value Unit Operating temperature range T op-40 to 100 °C Storage temperature T st -40 to 100 °C Junction temperature T J 125 °C Forward current per chip I F 350 mA Surge current per chip I FM 700mA Forward voltage per chip @ 350 mA V F 3 (R) / 8 (G) / 3.8 (B) V Reverse voltage per chip V R 5 V Reverse current (V R =5 V) I R 2 µA Power consumption @ 350 mA P tot5.2 W ESD sensitivity2 kV Soldering temperature Reflow (10 sec) Hand (3 sec.)T soldT sold260 400°CS H E E TE E TMechanical and Electrical SpecificationPackage:IMS Encapsulating Resin: Silicone Ring: PPA based Electrodes: Au PlatingReliability InformationPerkinElmer Reliability Test ProgramTest Item Content of Test Test Condition Remarks Measurement Ref. StandardResistance to Soldering Heat (Reflow Soldering) Stability of the devicefor RoHS conformsoldering conditionsT sold = 260°C for 10s(Pre treatment of theDUT: T sold=30°C,70%, 12h)One solderingcycle. Nonoperation of DUTduring test *)Visual Inspection.Measurement ofilluminance Ενbeforeand after testJEDEC J-STD-020CTemperature Cycle Test, TCT Stability of device underthermal stress, fastchange of temperatureT A =-40°C to 120°Cdwell time: 30 mincycles: 200, cycletime: 1hOperation of DUTat 10% of nominalcurrent *)Visual Inspection.Measurement of Ενafter 0, 100, 200cyclesIEC 60068-2-14High Temperature Test, HTS Stability of device atlong term storage athigh temp.T A = 110°Ctest duration: 1000hOperation of DUTat 10% of nominalcurrent *)Visual Inspection.Measurement of Ενafter 0, 1000hIEC 60068-2-2Low Temperature Test, LTS Stability of device atlong term storage atlow temp.T A = -40°Ctest duration: 1000hOperation of DUTat 10% of nominalcurrent *)Visual Inspection.Measurement of Ενafter 0, 1000hIEC 60068-2-1Temperature Humidity Storage, THS Stability of devicestored for a long term athigh temperature andhigh humidity.T env = 85°CRH=85%,test duration: 1000hOperation of DUTat 10% of nominalcurrent *)Visual Inspection.Measurement of Ενafter 0, 1000hIEC 60068-2-67Operation Life Test Stability of deviceoperated under nominalconditionsT A = 25°C, RH=30%,test duration: 1000hOperation of DUTat nominal currentI fn *)Visual Inspection.Measurement of Ενafter 0, 250,500,1000hIEC 60068-1Steady State Operating Life of High Humidity Heat Stability of device underelectrical and thermalstress and highhumidityT A = 60°CRH=90%,test duration: 1000hOperation of DUTat nominal currentI fn *)Visual Inspection.Measurement of Ενafter 0, 250, 500 and1000hIEC 60068-2-78Operation Life Test at High Temperature Stability of device athigh junctiontemperature andoperated at nominalcurrentT A = 85°Ctest duration: 1000hOperation of DUTat nominal currentI fn *)Visual Inspection.Measurement of Ενafter 0, 250, 500 and1000hIEC 60068-2-2Vibration Test Stability of device undermechanical stress.Sinusoidal vibration f=20-2000Hzacceleration: 200m/s²amplitude: ±0.751sweep rate: 3,2octave/minNumber of cycles:4, test duration:3x16minNon-operation ofDUT during testVisual Inspection.Measurement of Ενbefore and after test.IEC 60068-2-6Electrostatic Discharge Stability of device underelectrostatic stressTest Voltage=2kV(R=1,5kΩ, C=100pF)Positive andnegative dis-charges: 3x withESD-generator.Non-operation ofDUT during testVisual Inspection.Measurement ofilluminance beforeand after test.JEITA ED-4701*) The test is done after the sample is cooled down to room temperatureT sold = Soldering temperature, T A = Ambient temperature, I fn=350mA, DUT = Device under Test. The tests are performed on top of PerkinElmer Elcos standard heat sink.E E TSolderingFigure 1Reflow Soldering ProfileHand Soldering- Pre-heat ACULED on a hot plate at 100° C. - Use 95 W soldering iron.- Apply soldering temperature of 400° C for max. three seconds.CautionsNote: according IEC 60825-1 (EN 60826):LED radiation. Do not view directly with optical instruments.Notes1. PerkinElmer maintains a tolerance of ± 5% on flux and power measurements.2.ACULED VHL products with even higher luminous flux and radiometric power levels will become available in the future.3. Dominant wavelength is derived from the CIE 1931 chromaticity diagram and represents theperceived color.4. PerkinElmer maintains a tolerance of ± 2 nm for dominant wavelength measurements.5. PerkinElmer maintains a tolerance of ± 1 nm for peak wavelength measurements.6. PerkinElmer maintains a tolerance of ± 2 K/W for thermal resistance measurements depending onchip properties.7. Green and blue chips are based on Indium Gallium Nitride (InGaN). 8. Red chips are based on Aluminum Indium Gallium Phosphide (AlInGaP). 9. Blue chips represented here are IEC825 class 2 for eye safety. 10. Proper current derating must be observed to maintain junction temperature below the maximum. 11. LEDs are not designed to be driven in reverse bias. 12. Stresses in excess of the absolute maximum ratings can cause damage to the emitter. Maximumrating limits apply to each parameter in isolation, all parameters having values within the current derating curve. It should not be assumed that limiting values of more than one parameter can beapplied to the product at the same time. Exposures to the absolute maximum ratings for extended periods can adversely affect device reliability.13. Due to the special conditions of the manufacturing processes of LEDs, the typical data orcalculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.14. All drawings are not to scale. 15. All dimensions are specified in mm. 16. For general mounting instructions and thermal management requirements, please refer to ourapplication notes accordingly.Please consult PerkinElmer or its distributors for more information.Packagingww w.o p to el ec tro n i c s.p er ki n el m er.co m AC U L E D® 11Optics Currently, the ACULED lens holder system offers two different collimating optics. With an opening angle of approximately 32°, the ACULED LHS-AL25-L32 (E000525) provides a medium opening, whereas the LHS-AL25-L22 (E000524) has a tight collimating optic with an aperture angle of approximately 22°.Due to their superior optical quality, both optics increase luminous intensity and, thereby,enable new application fields for the ACULED. Please contact us for further information orto receive the datasheet ACULED LHS-AL25.Figure 3 Opening Angle: ExampleRGB with LensHeat Sink RecommendationsThe maximum junction temperature of the ACULED should not exceed 125° C. Therefore,an adequate heat sink is required for operating the LED with currents between 50 mA and350 mA. Due to the ACULED’s superior thermal management, heat dissipation isoptimized when the LED is screwed down with thermal grease onto a planar substrate.ACULED Evaluation KitPerkinElmer has designed an Evaluation Kit to run and test the ACULED in yourapplication. It is easy to use and does not require specialized technical know-how. Pleasecontact us to receive a product description and additional information on how to obtain theEvaluation Kit.ACULED VHL™ – Very High Lumen for the ACULEDAdditionally to the RGGB ACULED PerkinElmer has extended and improved its productline by the ACULED VHL, PerkinElmer's new line of standard monochromatic and multi-colored high powered LEDs. This results in improved chip types, higher brightness andadditional features. Please refer to the ACULED VHL datasheets accordingly.ACULED DYO™ – Flexibility to "Design-Your-Own" High PowerLEDPerkinElmer is also debuting its exclusive new "Design-Your-Own" line, the ACULED ®DYO™. The ACULED DYO gives customers the total flexibility to design their own four-chip LED configuration to suit their specific application.For more information on our new ACULED DYO line, please refer to the ACULED DYOCustom Design Guide.North American Sales OfficePerkinElmer Optoelectronics35 Congress StreetSalem, MA 01970, USATelephone: +1 978-745-3200 Toll free: (North America) +1 800-950-3441 Fax: +1 978-745-0894 Email:******************** European Headquarters PerkinElmer Optoelectronics Wenzel-Jaksch-Str. 31 65199 Wiesbaden, Germany Telephone: (+49) 611-492-247 Fax: (+49) 611-492-170 Email:***************************Asia Headquarters PerkinElmer Optoelectronics 47 Ayer Rajah Crescent #06-12Singapore 139947Telephone: (+65) 6775-2022Fax: (+65) 6775-1008 Email:*************************For a complete listing of our global offices, visit ©2007 PerkinElmer, Inc. All rights reserved. The PerkinElmer logo and design are registered trademarks of PerkinElmer, Inc. ACULED®, VHL™, and DYO™ are trademarks of PerkinElmer, Inc. or its subsidiaries, in the United States and other countries. All other trademarks not owned by PerkinElmer, Inc. or its subsidiaries that are depicted herein are the property of their respective owners. PerkinElmer reserves the right to change this document at any time without notice and disclaims liability for editorial, pictorial or typographical errors.600034_07 DTS0108。

JA02 3-5W小功率LED射灯驱动IC

通过原边反馈的恒流/恒压控制结构省去光耦和 TL431 每一个开关周期的电流限制外接晶体管进一步降低成本过压保护（OVP）
三、应用范围
过温保护（OTP）欠压锁定（UVLO）开短路保护无铅封装具负温度特性，延长产品寿命
LED 灯具，射灯，天花灯，球泡灯等。（1W/3W/5W）（芯片具有负温度特性，随着环境温度的升高，流过 LED 的电流逐渐变小从而达到降低系统温度，可以有效的保护灯具，延长灯具的寿命。）
JA02 (文件编号：S&CIC0836)
LED 功率射灯驱动 IC
十、 BOM 表及变压器规格
1、JA02-1W
BOM 表
序号
名称
1
PCB
2
贴片电阻
3
贴片电阻
4
贴片电阻
5
贴片电阻
6
贴片电阻
7
贴片电阻
8
贴片电容
9
贴片整流桥
10
贴片二极管
11
贴片二极管
12
贴片二极管
13
电解电容
14
绦纶电容
15
电解电容
SHENZHEN FUMAN ELECTRONICS CO., LTD.
JA02 LED 功率射灯驱动 IC TELÿ0755-83492838 FAXÿ0755-83492815 Mobile ÿ13509664550 ÿÿÿ
(文件编号：S&CIC0836)
2、JA02-3W
BOM 表
序号
名称
各1
备注同 JA02-3W-D 通用
R1 R2 R3 R4 R5 R6 C3 BR1 D2 D1 D3 C1 C2 C4 Q1 IC1 T1 AC1/AC2 VCC/GND

FM7222DS-3W LED功率射灯驱动IC 可替换BP9022A

产品概述FM7222DS是高精度原边反馈的LED恒流驱动芯片。

芯片工作在电感电流断续模式，适用于85Vac~265Vac全范围输入电压、反激式隔离LED恒流电源。

FM7222DS芯片内部集成650V功率开关，采用原边反馈模式，无需次级反馈电路，也无需补偿电路，只需要极少的外围元件即可实现恒流。

采用专利的驱动和电流检测方式，芯片的工作电流极低，无需变压器辅助绕组检测和供电，进一步减少外围元器件，极大的节约了系统成本和体积。

FM7222DS芯片内带有高精度的电流取样电路，使得LED输出电流精度达到±5%以内。

芯片采用了特有的恒流控制方式，可以达到优异的线性调整率。

FM7222DS具有多重保护功能，包括LED开路/短路保护，欠压保护，芯片过温保护等。

特性➢内部集成650V功率管；➢原边反馈恒流控制，无需次级反馈电路；➢无需变压器辅助绕组检测和供电；➢芯片超低工作电流；➢宽输入电压；➢±5% LED 输出电流精度；➢LED短路/开路保护；➢芯片供电欠压保护；➢过温保护；➢封装形式：SOP-8 。

应用范围➢LED射灯；➢LED 球泡灯；➢其它LED照明。

内部框图流和交流电参数规范。

对于未给定上下限值的参数，该规范不予保证其精度，但其典型值合理反映了器件性能。

注2：温度升高最大功耗一定会减小，这也是由TJMAX, θJA,和环境温度TA所决定的。

最大允许功耗为PDMAX (TJMAX - TA)/ θJA或是极限范围给出的数字中比较低的那个值。

推荐工作范围电气特性应用信息FM7222DS是一款专用于LED照明的恒流驱动芯片，采用专有的恒流架构和控制方法，芯片内部集成650V功率开关，只需要极少的外围组件就可以达到优异的恒流特性。

采用了原边反馈技术，FM7222DS无需光耦及TL431反馈，也无需辅助绕组供电和检测，系统成本极低。

启动系统上电后，母线电压通过启动电阻对V CC电容充电，当V CC电压达到芯片开启阈值时，芯片内部控制电路开始工作。

SM2212EA 2 段调光调色线性恒流 LED 驱动芯片说明书

SM2212EA订购信息若无特殊说明，环境温度为25°C。

注：表贴产品焊接最高峰值温度不能超过260℃，温度曲线依据J-STD-020 标准、参考工厂实际和锡膏商建议由工厂自行设定。

电气工作参数若无特殊说明，环境温度为25°C。

热阻参数注：芯片要焊接在有200mm2铜箔散热的PCB板，铜箔厚度35um。

SM2212EA 是可分段调光/调色温LED 恒流驱动控制电路，适用于200V~240V AC 输入电压，恒流精度小于±4%。

当SM2212EA 在分段调节亮度应用中，可根据开启关闭电源开关，依次改变输出电流的大小，从而改变LED 灯的亮度，调节比例可以通过外接REXT 电阻进行调整。

开关第一次开启 1rext R 0.61I =，开关第二次开启 2rext R 0.62I =,调光比例为100%，X%，2rext rext1R R %X =或X%，100%， 1rext rext2R R %X =。

当SM2212EA 在分段调节色温应用中，可根据开启关闭电源开关，依次改变两路输出端口开关状态，实现两路不同颜色LED 灯的交替亮灭以实现调节色温的目的，调节外接REXT 电阻可对系统输出功率进行调节。

芯片输出电流通过REXT 电阻进行调节。

开关第一次开启 1rext R 0.61I =，开关第二次开启 2rext R 0.62I =。

系统开关切换和复位时间描述SM2212EA 系统方案的开关切换时间由芯片VDD 端口控制，电容取值大小与复位时间关系曲线如下图1，建议取值1uF ，电容耐压值16V 。

SM2212EA 系统方案的复位时间由芯片VCC 端口控制，电容取值大小与复位时间关系曲线如下图2，建议取值4.7uF ，电容耐压值16V 。

图1 系统切换时间曲线图图2 系统复位时间曲线图典型应用方案单颗芯片应用方案一高PF值调光方案L图3 SM2212EA 2段调光典型应用电路图典型应用：R1=10Ω，R2=100Ω，当0.3s<开关周期<3s：开关第一次开启时，OUT1端口启动，输出平均电流IOUT=30mA；开关第二次开启时，OUT2端口启动，输出平均电流IOUT=3mA；当开关周期>3s（VCC电容设置），回复初始状态，输出平均电流IOUT=30mA。

JB-Lighting P12 Wash 640 W LED 光源磨蹭光源产品说明书

Made in GERMANYThe compact power packwith Fresnel lens for first-class lighting designP 12640 WLED WASHwith framing moduleZoom11°–66°(1:6)Output25,000lumenonly29 dB(A)extremely quietonly23 kgweight640 Wwhite light LEDThe P 12 Washdoes an excellent job in every respect!The P12 Wash with Fresnel lens is not only extremely bright with its 640 watt LED power, but also incredibly light, weighing only 23 kg. It is great fun to handle and operate and leaves a lasting impression with its wash optics and low-noise operation.JB-Moving lights combine innovative spirit, quality and sound market knowledge with excellent beam characteris-tics for first-class lighting design. The P12 Wash is a prime example of this, and not only thanks to its 11°–66° zoom range and framing module. In addition to the two color wheels and frost filters, the P12 Wash also impresses with its six gobos, which have been specially designed for wash applications. The P12 Wash is right at home in the bright-ness class of comparable moving lights with 1,200 watts and a power consumption of just 800 watts.The P12 Wash is a versatile powerhouse with features such as:• Zoom range from 11°–66° (1:6)• Framing module with 4 blades• CMY color mixing unit and linear CTO • 1 color wheel with 8 colors• 1 color wheel with 8 correction filters • 1 gobo wheel with 6 rotating gobos •E lectronic shutter with pre-programmed pulse and ramp functions• 2 stepless, variable frost filters (soft edge, flood frost)• Infinitely adjustable high-speed iris • G raphic color-touch display, rotated electronically • Flicker-free operation, camera mode 100 Hz – 3 kHz • 4 carrying handles for easy handling • U ltra-quiet 29 dB(A)Find more information at: www.jb-lighting.deP 12W ASHP 12W ASHBluetoothDMXWifiEthernetHC (High CRI) 5800 K34,000 lm (19,000 lm Output)CRI > 90HP (High Power)6800 K46,000 lm (25,000 lm Output)CRI > 70 (with High CRI filter > 85)8brilliant colors6rotating gobosCMY+ variable CTO8correction filtersCTO 1Gobo projectionDimensions:A l l t e c h n i c a l s p e c i fi c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i fi c a t i o n © JB -L i g h t i n g 3.2020Optics and light source• 640 W white light LED moduleHP (High Power): 6800 K; 46,000 lm (25,000 lm Output); CRI > 70, with High CRI filter > 85HC (High CRI): 5800 K; 34,000 lm (19,000 lm Output); CRI > 90• > 20,000 h life time• Flicker-free operation, camera mode 100 Hz – 3 kHz • Zoom range: 11°– 66° (1:6)Effects• F raming module with 4 blades – each fully closing (total curtain) and with separate motion and rotation control, module can be rotated by 110°• 1 gobo wheel with 6 rotate-, position- and interchangeable gobos: 5 gobos + 1 multicolor gobo + open • C MY color mixing unit for fast and homogeneous color mixing + linear CTO • 1 color wheel with 8 full and semi colors + open also linear color selection • 1 color wheel with 8 correction filters + open • High CRI filter • 2 frost filters (soft edge/flood frost), continuously variable – optional further frost stages possible• Motorised infinitely adjustable high-speed iris • Electronic dimmer 0% –100%• E lectronic shutter with preprogrammed puls- and ramp functions • Animation effect / Sparkle effect• Focus system with auto focus functionMovement• 3 phase extra strong stepping motors • Precise, very fast and silent movement • 540° pan / 280° tiltControl and programming• USITT DMX-512, RDM• Ethernet interface with Art-Net and sACN• Wireless DMX / RDM Lumen Radio CRMX TiMo • Bluetooth, Wifi• Color touch display with function keys and battery backup • Mini USB for software update• Stand-alone mode, master/slave function • Built-in DMX analyserConstruction• Original JB-Lighting slide-in module technology • Rugged construction with 4 carrying handles • Transport lock for pan/tilt• Fan control for almost noiseless operation, 29 dB(A)• Graphical display, electronically revolvable • Neutrik 5pin XLR IN/OUT• Neutrik powerCON TRUE1 IN/OUTRigging• 2 Omega brackets for quick and convenient installationElectrical specification• Max. power consumption 800 VA• Input voltage range 100 V –240 V , 50/60 HzMechanical specifications• Dimensions: W 421 x D 264 x H 682 mm • Weight: 23 kgScope of delivery• • 2 Omega bracketsTechnical specifications:421433421433682264479231Accessories:AMPTOWN double (Code CASE38)• with SiP foam inlet and stacking grooves • Dimensions: W 60 x D 60 x H 90 cm• Weight without (incl. fixtures): approx. 48 (94) kg AMPTOWN fourfold (Code CASE39)• with SiP foam inlet and stacking grooves • Dimensions: W 120 x D 60 x H 90 cm• Weight without (incl. fixtures): approx. 76 (168) kgE-Mail:*******************·www.jb-lighting.de。

红外LED灯产品说明书

Dimensions: [mm]35150505RS73300150505RS73300150505RS73300150505RS73300BCC(mm)min.12,80150505RS73300T e m p e r a t u r eT pT L150505RS73300Cautions and Warnings:The following conditions apply to all goods within the product series of Optoelectronic Components of Würth Elektronik eiSos GmbH & Co. KG:General:•This optoelectronic component is designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Optoelectronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer •The optoelectronic component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved.•Do not drop or impact the components, the component may be damaged•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.•The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products.•Unless Würth Elektroik has given its express consent, the customer is under no circumstances entitled to reverse engineer, disassemble or otherwise attempt to extract knowledge or design information from the optoelectronic componentProduct specific:Soldering•The solder profile must comply with the technical product specifications. All other profiles will void the warranty.•All other soldering methods are at the customers’ own risk.•The soldering pad pattern shown above is a general recommendation for the easy assembly of optoelectronic component. If a high degree of precision is required for the selected application (i.e. high density assembly), the customer must ensure that the soldering pad pattern is optimized accordingly.Cleaning and Washing:•Washing agents used during the production to clean the customer application might damage or change the characteristics of the optoelectronic component body, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product. •Using a brush during the cleaning process may break the optoelectronic component body. Therefore, we do not recommend using a brush during the PCB cleaning process.Potting:•If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the optoelectronic component body, pins or termination. Expansion could damage the components. We recommend a manual inspection after potting to avoid these effects.Storage Conditions:• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the optoelectronic component to direct sunlight.•The storage conditions in the original packaging are defined according to DIN EN 61760-2.•For a moisture sensitive component, the storage condition in the original packaging is defined according to IPC/JEDEC-J-STD-033. It is also recommended to return the optoelectronic component to the original moisture proof bag and reseal the moisture proof bag again. •The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Packaging:•The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. Handling:•Violation of the technical product specifications such as exceeding the nominal rated current, will void the warranty.•The product design may influence the automatic optical inspection.•Certain optoelectronic component surfaces consist of soft material. Pressure on the top surface has to be handled carefully to prevent negative influence to the function and reliability of the optoelectronic components.•ESD prevention methods need to be applied for manual handling and processing by machinery.•Resistors for protection are obligatory.•Luminaires in operation may harm human vision or skin on a photo-biological level. Therefore direct light impact shall be avoided. •In addition to optoelectronic components testing, products incorporating these devices have to comply with the safety precautions given in IEC 60825-1, IEC 62471 and IEC 62778•Please be aware that Products provided in bulk packaging may get bent and might lead to derivations from the mechanical manufacturing tolerances mentioned in our datasheet, which is not considered to be a material defect.Please be aware that Products provided in bulk packaging may get bent and might lead to derivations from the mechanical manufacturing tolerances mentioned in ourdatasheet, which is not considered to be a material defect.Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODLiDo002.0002022-10-25DIN ISO 2768-1mDESCRIPTIONWL-SMTW SMT Mono-color TOPLED Waterclear ORDER CODE150505RS73300SIZE/TYPE BUSINESS UNIT STATUS PAGETechnical specification:•The typical and/or calculated values and graphics of technical parameters can only reflect statistical figures. The actual parameters of each single product, may differ from the typical and/or calculated values or the typical characteristic line.•On each reel, only one bin is sorted and taped. The bin is defined on intensity, chromaticity coordinate or wavelength and forward voltage.•In order to ensure highest availability, the reel binning of standard deliveries can vary. A single bin cannot be ordered. Please contact us in advance, if you need a particular bin sorting before placing your order.•Test conditions are measured at the typical current with pulse duration < 30ms. •Optical properties are measured according the CIE 127:2007 standard. •Wavelength tolerance under measurement conditions ± 2nm. •Optical intensity tolerance under measurement conditions ±15%. •Forward voltage tolerance under measurement conditions ± 0.1V.•CCT tolerance of x and y coordinate of ± 0.01 and CRI tolerance of ± 2 is allowed.In the characteristics curves, all values given in dotted lines may show a higher deviation than the parameters mentioned above.These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.However, no responsibility is assumed for inaccuracies or incompleteness.The customer has the sole responsibility to ensure that he uses the latest version of this datasheet, which is available on Würth Elektronik’s homepage. Unless otherwise agreed in writing (i.e. customer specific specification), changes to the content of this datasheet may occurwithout notice, provided that the changes do not have a significant effect on the usability of the optoelectronic componentsWürth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 174638 Waldenburg GermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCEPROJECTION METHODLiDo002.0002022-10-25DIN ISO 2768-1mDESCRIPTIONWL-SMTW SMT Mono-color TOP LED WaterclearORDER CODE150505RS73300SIZE/TYPEBUSINESS UNITSTATUSPAGEImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODLiDo002.0002022-10-25DIN ISO 2768-1mDESCRIPTIONWL-SMTW SMT Mono-color TOPLED Waterclear ORDER CODE150505RS73300SIZE/TYPE BUSINESS UNIT STATUS PAGE。

Bridgelux SMD 2835 1W 9V Gen 2产品数据表 DS58说明书

Product Data Sheet DS58The Bridgelux SMD 2835 low power LED is hot-color targeted, which ensures that the LEDs fall within their specified color bin at the typical application conditions of 85°C. With its broad lumen coverage and wide range of CCT options, the SMD 2835 provides unparalleled design-in flexibility for indoor and outdoor lighting applications. The SMD 2835 is ideal as a drop-in replacement for emitters with an industry standard 2.8mm x 3.5mm footprint.Features• Industry-standard 2835 footprint• 9 bin color control enables tight color control• Hot-color targeting ensures that color is within the ANSI bin at the typical application conditions of 85°C • Enables 3- and 5-step MacAdam ellipse custom binning kits• RoHS compliant and lead free• Multiple CCT configurations for a wide range of lighting applicationsBenefits• Lower operating and manufacturing cost• Ease of design and rapid go-to-market• Uniform consistent white light• Reliable and constant white point• Environmentally friendly, complies with standards • Design flexibilityContentsProduct Feature MapYellow phosphor Light Emitting Surface (LES)Product NomenclatureThe part number designation for Bridgelux SMD 2835 is explained as follows:Product Test ConditionsBridgelux SMD 2835 LEDs are tested and binned with a 10ms pulse of 100mA at T j (junction temperature)=T sp (solder point temperature) =25°C. Forward voltage and luminous flux are binned at a T j =T sp =25°C, while color is hot targeted at a T sp of 85°C.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15Product FamilyColor Bin OptionsFlux BinsMinimum CRIE = 80 CRI G = 90 CRIForward Voltage Bins Nominal CCT27 = 2,700K 30 = 3,000K 35 = 3,500K 40 = 4,000K 50 = 5,000K 57 = 5,700K 65 = 6,500KBXEN – 30 E – 1 3 H – 9 B – 00 – 0 – 0Product VersionHigh PowerDie count in parallelTypical Forward Voltage Die count in series Bridgelux SMD LED products come in industry standard package sizes and follow ANSI binning standards. These LEDs are optimized for cost and performance, helping to ensure highly competitive system lumen per dollar performance while addressing the stringent efficacy and reliability standards required for modern lighting applications.The following product configurations are available:Notes for Table 1 & 2:1. The last 6 characters (including hyphens ‘-’) refer to flux bins, forward voltage bins, and color bin options, respectively. “00-0-0” denotes the full distribution of flux, forward voltage, and 7 SDCM color. Example: BXEN-30E-13H-9B-00-0-0 refers to the full distribution of flux, forward voltage, and color within a 3000K 7-step ANSI standard chromaticity region with a minimum of 80CRI, 1x3 die configuration, high power, 9.5V typical forward voltage at T sp =25°C2. Product CCT is hot targeted at Tsp = 85°C. Nominal CCT as defined by ANSI C78.377-2011.3. Listed CRIs are minimum values and include test tolerance.4. Products tested under pulsed condition (10ms pulse width) at nominal drive current where Tj=Tsp=25°C.5. Bridgelux maintains a ±7.5% tolerance on luminous flux measurements, ±0.1V tolerance on forward voltage measurements, and ±2 tolerance on CRI measurements for the SMD 2835.6. Refer to Table 6 and Table 7 for Bridgelux SMD 2835 Luminous Flux Binning and Forward Voltage Binning information.7. Typical DC (direct current) test performance values are provided as reference only and are not a guarantee of performance.8. Typical performance is estimated based on operation under DC current with LED emitter mounted onto a heat sink with thermal interfacematerial and the solder point temperature maintained at 85°C. Based on Bridgelux test setup, values may vary depending on the thermal design of the luminaire and/or the exposed environment to which the product is subjected.Table 2: Selection Guide, Stabilized DC Performance (T sp = 85°C)7,8Table 1: Selection Guide, Pulsed Measurement Data at 100mA (T j =T sp=25°C)Product Selection GuideTable 3:Performance at Commonly Used Drive CurrentsSMD 2835 LEDs are tested to the specifications shown using the nominal drive currents in Table 1. SMD 2835 may also be driven at other drive currents dependent on specific application design requirements. The performance at any drive current can be derived from the current vs. voltage characteristics shown in Figure 2 and the relative luminous flux vs. current characteristics shown in Figure 3. The performance at commonly used drive currents is summarized in Table 3.4Notes for Table 3:1. Alternate drive currents in Table 3 are provided for reference only and are not a guarantee of performance.2. Bridgelux maintains a ± 7.5% tolerance on flux measurements.3. Typical stabilized DC performance values are provided as reference only and are not a guarantee of performance.Table 3:Performance at Commonly Used Drive Currents (Continued)Notes for Table 3:1. Alternate drive currents in Table 3 are provided for reference only and are not a guarantee of performance.2. Bridgelux maintains a ± 7.5% tolerance on flux measurements.3. Typical stabilized DC performance values are provided as reference only and are not a guarantee of performance.Electrical CharacteristicsNotes for Table 4:1. The last 6 characters (including hyphens ‘-’) refer to flux bins, forward voltage bins, and color bin options, respectively. “00-0-00” denotes the full distribution of flux, forward voltage, and 7 SDCM color. Example: BXEN-30E-13H-9B-00-0-0 refers to the full distribution of flux, forward voltage, and color within a 3000K 7-step ANSI standard chromaticity region with a minimum of 80CRI, 1x3 die configuration, high power, 9.5V typical forward voltage at T sp =25°C2. Bridgelux maintains a tolerance of ± 0.1V on forward voltage measurements. Voltage minimum and maximum values at the nominal drive current are guaranteed by 100% test.3. Products tested under pulsed condition (10ms pulse width) at nominal drive current where Tsp = 25°C.4. Thermal resistance value was calculated using total electrical input power; optical power was not subtracted from input power.Table 4: Electrical CharacteristicsAbsolute Maximum RatingsTable 5: Maximum RatingsNotes for Table 5:1. Bridgelux recommends a maximum duty cycle of 10% and pulse width of 10 ms when operating LED SMD at maximum peak pulsed current specified.Maximum peak pulsed current indicate values where LED SMD can be driven without catastrophic failures.2. Light emitting diodes are not designed to be driven in reverse voltage and will not produce light under this condition.Product Bin DefinitionsTable 6: Luminous Flux Bin Definitions at 100mA, T sp=25°CTable 6 lists the standard photometric luminous flux bins for Bridgelux SMD 2835 LEDs. Although several bins are listed, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.Table 7: Forward Voltage Bin Definition at 100mA, T sp=25°CNote for Table 7:1. Bridgelux maintains a tolerance of ± 0.1V on forward voltage measurements.Note for Table 6:1. Bridgelux maintains a tolerance of ± 7.5% on luminous flux measurements.Product Bin DefinitionsTable 8: 3- and 5-step MacAdam Ellipse Color Bin DefinitionsNotes for Table 8:1. Color binning at T sp =85°C2.Bridgelux maintains a tolerance of ± 0.007 on x and y color coordinates in the CIE 1931 color space.Product Bin DefinitionsFigure 1: C.I.E. 1931 Chromaticity Diagram (9 Color Bin Structure, hot-color targeted at T=85°C)spNote for Figure 3:1. Bridgelux does not recommend driving high power LEDs at low currents. Doing so may produce unpredictable results. Pulse width modulation (PWM) is recommended for dimming effects.Figure 2: Drive Current vs. Voltage (T sp =25°C)Figure 3: Typical Relative Luminous Flux vs. Drive Current (T sp=25°C)Figure 4: Typical Relative Flux vs. Solder Point TemperatureFigure 5: Typical ccx Shift vs. Solder Point Temperature1. Characteristics shown for warm white based on 3000K and 80 CRI.2. Characteristics shown for nuetral white based on 4000K and 80 CRI.3. Characteristics shown for cool white based on 5000K and 80 CRI.4. For other color SKUs, the shift in color will vary. Please contact your Bridgelux Sales Representative for more information.Figure 6: Typical ccy Shift vs.Solder Point TemperatureNotes for Figure 6:1. Characteristics shown for warm white based on 3000K and 80 CRI.2. Characteristics shown for neutral white based on 4000K and 80 CRI.3. Characteristics shown for cool white based on 5000K and 80 CRI.4. For other color SKUs, the shift in color will vary. Please contact your Bridgelux Sales Representative for more information.Typical Radiation PatternFigure 7: Typical Spatial Radiation Pattern at 100mA, T sp =25°CFigure 8: Typical Polar Radiation Pattern at 100mA, T sp =25°CNotes for Figure 7:1. Typical viewing angle is 116⁰.2.The viewing angle is defined as the off axis angle from the centerline where luminous intensity (Iv) is ½ of the peak value.Typical Color Spectrum Figure 9: Typical Color SpectrumNotes for Figure 9:1. Color spectra measured at nominal current for Tsp = 25°C2. Color spectra shown for warm white is 2700K and 80 CRI.3. Color spectra shown for warm white is 3000K and 80 CRI.4. Color spectra shown for neutral white is 4000K and 80 CRI.5. Color spectra shown for cool white is 5000K and 80 CRI.6. Color spectra shown for cool white is 6500K and 80 CRI.Mechanical Dimensions Figure 10: Drawing for SMD 2835Notes for Figure 10:1. Drawings are not to scale.2. Drawing dimensions are in millimeters.3. Unless otherwise specified, tolerances are ± 0.10mm. Recommended PCB Soldering Pad PatternReliabilityTable 9: Reliability Test Items and ConditionsNotes for Table 9:1. Measurements are performed after allowing the LEDs to return to room temperature2. T sld : reflow soldering temperature; T a: ambient temperaturePassing CriteriaFigure 11 :Reflow ProfileReflowing CharacteristicsFigure 12 : Pick and PlaceNote for Figure 12:1. When using a pick and place machine, choose a nozzle that has a larger diameter than the LED’s emitting surface. Using a Pick-and-Place nozzle witha smaller diameter than the size of the LEDs emitting surface will cause damage and may also cause the LED to not illuminate.Is greater than LEDsemitting surfacePackagingFigure 13: Emitter Reel DrawingsNote for Figure 13:1. Drawings are not to scale. Drawing dimensions are in millimeters. Figure 14: Emitter Tape DrawingsNote for Figure 14:1. Drawings are not to scale. Drawing dimensions are in millimeters.PackagingFigure 15: Emitter Reel Packaging DrawingsNote for Figure 15:1. Drawings are not to scale.Design ResourcesDisclaimersPrecautionsPlease contact your Bridgelux sales representative for assistance.MINOR PRODUCT CHANGE POLICYThe rigorous qualification testing on products offered by Bridgelux provides performance assurance. Slight cosmetic changes that do not affect form, fit, or function may occur as Bridgelux continues product optimization.CAUTION: CHEMICAL EXPOSURE HAZARDExposure to some chemicals commonly used in luminaire manufacturing and assembly can cause damage to the LED emitter. Please consult Bridgelux Application Note AN51 for additional information.CAUTION: EYE SAFETYEye safety classification for the use of Bridgelux SMD LED emitter is in accordance with IECspecification EN62471: Photobiological Safety of Lamps and Lamp Systems. SMD LED emitters are classified as Risk Group 1 when operated at or belowthe maximum drive current. Please use appropriate precautions. It is important that employees working with LEDs are trained to use them safely.CAUTION: RISK OF BURNDo not touch the SMD LED emitter during operation. Allow the emitter to cool for a sufficient period of time before handling. The SMD LED emitter may reachelevated temperatures such that could burn skin when touched.CAUTIONCONTACT WITH LIGHT EMITTING SURFACE (LES) Avoid any contact with the LES. Do not touch the LES of the emitter or apply stress to the LES (yellow phosphor resin area). Contact may cause damage to the emitterOptics and reflectors must not be mounted in contact with the LES (yellow phosphor resin area).STANDARD TEST CONDITIONSUnless otherwise stated, LED emitter testing is performed at the nominal drive current.About Bridgelux: We Build Light That Transforms© 2017 Bridgelux, Inc. All rights reserved 2017. Product specifications are subject to change without notice. Bridgelux and the Bridgelux stylized logo design are registered trademarks of Bridgelux, Inc. All other trademarks are the property of their respective owners.46430 Fremont Boulevard Fremont, CA 94538 USA Tel (925) At Bridgelux, we help companies, industries and people experience the power and possibility of light. Since 2002, we’ve designed LED solutions that are high performing, energy efficient, cost effective and easy to integrate. Our focus is on light’s impact on human behavior, delivering products that create better environments, experiences and returns—both experiential and financial. And our patented technology drives new platforms for commercial and industrial luminaires.For more information about the company, please visit /Bridgelux /Bridgelux/user/Bridgelux WeChat ID: BridgeluxInChina。

超特克HV9922DB1 LED灯串驱动示例板说明书

Supertex inc.Supertex inc.Doc.# DSDB-HV9922DB1A032913HV9922DB1IntroductionThe Supertex HV9922DB1 demoboard is a complete LED power driver to supply a string of LEDs using the HV9922, an integrated 3-pin high input voltage constant-current buck regulator IC. The HV9922 integrates a 500V switching MOSFET and can operate directly from the rectified universal AC line voltage range of 80 to 265VAC.The current in the LED string is internally programmed to 20mA ±15%. The HV9922DB1 is ideally suited for driving strings of LEDs having forward voltage from 20 to 30V at high efficiency (typically 80% at 120VAC).The HV9922DB1 is a peak current-controlled buck converter operating with fixed off-time of 10.5µs. Its fixed off-time control scheme provides good stability and tight regulation of the LED current throughout the input AC line voltage range. As its switching frequency varies over the AC line cycle, the HV9922 inherently introduces frequency dither and simplifies the compliance with EMI regulations.Board Layout and Connection DiagramUniversal Off-line LED Driver DemoboardConnectionsLED+: Connect the Anode of the LED string to this pin.LED-: Connect the Cathode of the LED string to this pin.AC1, AC2: Connect AC Line to these pins.Note:The demoboard is not protected from output open/short circuit condition. Damage to the demoboard may occur if the output load is not properly connected.AC Line80 - 265VACSupertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//)©2013 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited.Supertex inc.1235 Bordeaux Drive, Sunnyvale, CA 94089Tel: 2HV9922DB1Doc.# DSDB-HV9922DB1A032913Testing the HV9922DB1Connect the LED string to the output terminals.Check the polarity of the LED connection, anode end of the string should be connected to the positive output, cathode should be connected to the negative output. Connect the AC input to the input terminals. Apply the AC voltage at the input terminals and the LED string should start to glow. The HV9922DB1 will regulate constant 50mA current in the LED.An ammeter can be connected in series with the LED(s) to measure the output current. The average current reading may be smaller than 50mA. This is due to the interruptions in the LED current when the input AC line voltage falls below the forward voltage of the LED string. The average current will also vary over the AC line voltage range. Additional hold-up capacitance can be included across C IN , if these interruptions are not desirable.LED 1 - LED 8。

桥Cast影院LED灯具驱动器杰特单通道 30W （DALI-2）说明书

®Pallas-D Single Channel 30W (DALI-2)BridgeluxBrick DriverProduct Data Sheet DS1219EU input 220-240VACLED Output 4 Dip-switch (12 steps)Product NomenclatureTable 2:Input Electrical CharacteristicsSpecification Unit Parameter 220 –240V Nominal voltage 0/50 / 60Hz Nominal frequency 198 –264V AC voltage range 198 -280V DC voltage range 0.25A Nominal current ≥ 0.95-Power factor (Full load)≤ 6%THD (Full load)≥ 87%Efficiency (Full load)≤ 0.5W NO load I, II-Protection class < 4.64 (th = 41.6 μs)A pk Inrush current(Coldstart)B10: 22 B16: 32 B20:38 C10: 27 C16: 41 C20:47-Max. units per circuit breakerTable 3:Output Electrical CharacteristicsSpecificationUnit Parameter 24-42V V Nominal voltage range ≤ 59Vdc Maximum voltage(OpenCircuit)700650600550500450400350300250200150mA Nominal current +/-5+/-7+/-8+/-10%Current accuracyYesDALI-2（IEC 62386-101,102,207）& Push DimDimming Dimming Range 1% -100%≤ 4 %Current ripple LF< 3KHz ≤ 0.05-Pst LM ≤ 0..01-SVM 30W Maximum power SELV-Galvanic isolationFigure 1:Power Factor vs. Load Figure 2:Total Harmonic Distortion vs. LoadFigure 3:Efficiency vs. Load Figure 4:Expected Life TimeFigure 5:Operating WindowFigure 6:Mechanical DrawingStrain Relief Notes for Figure 6:1.Drawing dimensions are in millimeters2.Unless otherwise specified, all linear tolerances are +/-1.0mmDIP-switch operation instructions & operating windowTable 5:Dip-switch operation instructions & operating windowI out U out Dip-switch setting4321150 mA 24-42V OFF ON OFF OFF 200 mA 24-42V OFF ON OFF ON 250 mA 24-42V OFF ON ON OFF 300 mA 24-42V OFF ON ON ON 350 mA 24-42V ON OFF OFF OFF 400 mA 24-42V ON OFF OFF ON 450 mA 24-42V ON OFF ON OFF 500 mA 24-42V ON OFF ON ON 550 mA 24-42V ON ON OFF OFF 600 mA 24-42V ON ON OFF ON 650 mA 24-42V ON ON ON OFF 700 mA24-42VONONONONTable 6:WiringEnvironmental and Regulatory StandardsTable 8:Environmental ConditionsSpecification Parameter-20°C to + 50°C Ambient Operating Temperature +80°C (max)Max. Case Temperature Tc+110°CMax. Case Temperature (In fault condition)Maximum 90% Relative Humidity, non condensingHumidity Rating -40°C to + 80°C Storage Temperature > 50,000 hours (Tc < 80°C)Expected LifetimeTable 9:Regulatory Approvals and Compliance ConditionReference Standard Specificationelectronic controlgear for use on DC or AC EN 62384:2006/A1:2009DC or AC suppliedsupplies up to 1 000 V (alternating current at 50 Hz or 60 Hz) and with an output frequency which can deviate from the supply frequencyelectronic controlgear for LED modulesEN 55015:2019+A1:2020 (CISPR Conducted and Radiated 15:2018)EMIHarmonic Current EN IEC 61000-3-2:2014EmissionsIEC 61000-3-3:2013Voltage Fluctuations & Flicker4 kV contact discharge, IEC 61547:2009 Section 5.2ESD (Electrostatic 8 kV air discharge, level 3Test des.: IEC 61000-4-2 Discharge)3 V/m, 80 -1000 MHz, 80% modulated at distance of 3 metersIEC 61547:2009 Section 5.3Test des.: IEC 61000-4-3 Continuous Radiated Disturbance±1 kV on AC power port for 1 minute, IEC 61547:2009 Section 5.5Test des.: IEC 61000-4-4 Electrical Fast Transient IEC 61547 Section 5.7±1 kV (differential mode)Test des.: IEC 61000-4-5SurgeIEC 61547:2009 Section 5.6Continuous Conducted 3V, 0.15-80 MHz, 80% modulated, Level 2Test des.: IEC 61000-4-6Disturbance 70% dip during 25 cycles @ 50Hz, 30 cycles @ IEC 61547 Section 5.8, 5.9Voltage Dips60Hz 0% dip during ½ cyclesTest des.: IEC 61000-4-11Design ResourcesApplication NotesPlease contact your Bridgelux sales representative for assistance on obtaining application support when designing with the Bridgelux Pallas-D Single Channel Driver. For a list of available resources, visit.PrecautionsCAUTION: PRODUCT HANDLINGHandle the Pallas-D Single Channel Driver with care to prevent any damage from mechanical shockIt is recommended to handle this driver in a static-free environmentTo maintain product warranty, the product must not be opened or disassembled and the installer must ensure that the driver's operating conditions do not exceed the maximum conditions stated within this data sheet.CAUTION: PRODUCT INSTALLATIONIncorrect installation of the Pallas-D Single Channel Driver can cause irreparable damage to the driver, connected LEDs.Pay attention when connecting the LED load and observe the correct polarity of the output terminals as specified in this data sheet and on the driver label. Hot plug-in or secondary switching of LEDs is not permitted and may cause a very high current to the LEDs.CAUTION: ELECTRIC SHOCKBe aware of the possibility of an electric shock hazard which can result in serious injury or death. Disconnect power before servicing or installing this device.DisclaimersMINOR PRODUCT CHANGE POLICYThe rigorous qualification testing on products offered by Bridgelux provides performance assurance. Slight cosmetic changes that do not affect form, fit, or function may occur as Bridgelux continues product optimization.About Bridgelux: Bridging Light and Life TMAt Bridgelux, we help companies, industries and people experience the power and possibility of light.Since 2002, we’ve designed LED solutions that are high performing, energy efficient, cost effective andeasy to integrate. Our focus is on light’s impact on human behavior, delivering products that create better environments, experiences and returns—both experiential and financial. And our patented technologydrives new platforms for commercial and industrial luminaires.For more information about the company, please visit/Bridgelux/Bridgelux/user/Bridgelux/company/bridgeluxWeChat ID: BridgeluxInChina46410 Fremont BlvdFremont, CA 94538 USATel (925) 583-8400© 2023 Bridgelux, Inc. All rights reserved 2023. Product specifications are subject to change without notice. Bridgelux, the Bridgelux stylized logo design and Pallas-D areregistered trademarks of Bridgelux, Inc. Bridging Light and Life is a trademark of Bridgelux, Inc. All other trademarks are the property of their respective owners.Bridgelux Pallas-D (DALI) Single Channel 30W Driver Product Data Sheet DS1219 Rev. A (04/2023)11。

桥吉克LED灯饰说明书

SATELLITE15W3D190 219SATELLITEManualThe appliance should be installed, connected and tested by a qualified electrician and in accordance with local regulations and AS/NZS3000.The unit is tested and complies to AS/NZS 60598.2.2 when used with glass wool insulation with a zero ignitability rating e.g Pink Batts.Ensure the location of the unit to be installed is free of obstructions. Cut required hole size. Final cut out iscontractor’s responsibility. Cutting of holes prior to receiving goods is at own risk.Risk of Fire. Required Clearance from structural members & building elements HCB (25mm) and SCB (0mm).When installing the fitting always take care to support the weight of the LED while connected to the power supply. The max distance possible should be achieved between the LED fitting and the driver to minimise heat transfer, a minimum of 100mm is required.When installing multiple fittings with one driver, ensure secondary wiring is connected in series only.Do not connect/reconnect the appliance to a driver that is powered or has been powered within 5 minutes or directly to the power supply if no driver is connected.INSTRUCTION MANUALFLUA®byPO Box 816, Hamilton 32404-8 Mainstreet PlaceHamilton 3200, New Zealand Telephone +64 7 849 9119Facsimile +64 7 849 SATELLITE15W3D190 219。