蓄电池规格及技术参数

GFM系列阀控密封铅酸蓄电池

应用范围

1：电信、移动、联通、铁道、船舶、等各种通信、信号系统备用电源。

The standby power in all kinds of telecommunication signal system ,

such as: Telecom, Mobile, Unicom, railway and ship, etc.

2：电力系统、核电站备用电源、太阳能、风能发电储能。

The standby power in electric power system and nuclear power station;

photo voltaic system.

3：UPS、应急照明等备用电源。

UPS，Emergency lighting

规格型号及尺寸

类型额定电压

规格

（C10）

外形尺寸(mm)

长×宽×槽高(总高)

重量

(kg)

备注

GFM 2V 200Ah 101×184×348(365) 16

GFM 2V 300 Ah 132×184×348(365) 21

GFM 2V 400 Ah 163×184×348(365) 26

GFM 2V 500 Ah 194×184×348(365) 31

GFM 2V 600 Ah 225×184×348(365) 37

GFM 2V 800 Ah 303×184×348(365) 50

GFM 2V 1000 Ah 373×184×348(365) 61

GFM 2V 1200 Ah 464×180×363(381) 78

GFM 2V 1600 Ah 403×354×355(378) 116

GFM 2V 2000 Ah 492×352×355(378) 135

GFM 2V 3000 Ah 712×352×355(382) 200

产品特点 Products characteristics

1、极板：极板采用矩形大网格分块结构、专有的四碱式硫酸铅形成技术和专有合

金材料制作，提高了电池体积比能量和重量比能量。

Plate: We adopt some specific technology in casting plates such as

rectangle gridding structure, sulphuric lead forming and alloy material

producing, which enhances the volume ratio energy and weight ratio

energy.

2、正板栅使用低锑银合金，克服了铅钙合金正板栅的无锑效应和抗蠕变性差的缺

点，无论浮充使用还是循环使用，都有很长的使用寿命，不同地区供电条件的

差别将不会对蓄电池性能造成影响。

Low Sb-Ag alloy is used in spines casting, which overcomes the defects of no-Sb effect and bad anti-squirm performance, thus, the battery has long life no matter in floating charge use or in cycle charge use and will not effect by the difference of electric supply of different districts.

3、隔板：采用吸收式超细玻璃纤维隔板，其内阻低，高倍率放电性能好。

Separator: The absorbed super fine fiber glass is used. The inner resistant is low and the discharge performance at high rate is good.

4、活性物质：正、负极铅膏中加入特殊添加剂，通过合理分配有机和无机添加剂

比例，减少电池在电化学反应过程中的有机物分解，改变活性物质微观结构，

活性物质利用率高、充电接受能力强。

Active material: Special additive is added into the lead cream of positive and negative plates and the decompounding of organic material of batteries in electrochemistry reaction is reduced through reasonable distributing the ratio of organic and inorganic additive, which change the micro-structure of active material, thus, the usage rate of active material is high and the charge acceptance is good.

5、高纯度电解液：采用高纯度电解液和特殊添加剂，提高了活性物质利用率，降

低了电池的自放电。

High purity electrolyte: Due to the addition of high purity electrolyte and special additive, the usage rate of active material enhances and the self-discharge rate reduces.

6、特殊的极柱密封结构：采用特有的组合迷宫极柱密封结构（专利技术）及焊接

工艺，确保密封安全可靠。

Special post sealing structure: The special combined labyrinth post sealing structure and welding technics are used to ensure the sealing safe and reliable.

7、安全阀结构：阀体采用阻燃ABS材料，阀芯为柱状结构，双过滤酸雾滤片，具

有准确控制开、闭阀压力、阻燃、过滤酸雾功能。

Safety valve: The body of valve is fire retardant ABS material; the core of valve is post structure and the acid filter is double, so the valve has the function of controlling the pressure of opening and closing valve correctly, fire retardant and acid filtrating.

8、极群包片结构：采用U型双层纵向包膜方式和紧装配技术，有效的防止了极板

应力对隔膜弹性的影响，隔膜附着性好，吸酸均匀，极板无污染。

Combined plates structure: The technics of U-type double layers vertical packing and tight equipping are used to prevent the effect to separator stretch by plates’ stress. The attachment and absorbability of separator is good. The plate will not cause pollution.