风筒UL859测试报告
相关主题
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
測試報告
測試報告
測試報告
TEST TIME ROOM TEMP
一测试方法(Test Method):
5条件(Condition):
1.1安放在绝缘表面(Mounted on an insulating surface)
1.2供以120V(或240V 根据规格而定) 60Hz电压(Connected to a 120V, 60Hz (or 240 depending on the rating)
source of supply;
2方式(Method):
2.1量取易触及带电金属部件到地之间的漏电流(Currents were measured from accessible metal parts to earth
ground);
2.2插头先正接后反接;
3要求(Requirement):
测得最大泄漏电流不超过0.5mA﹔如果器具外壳是导电性非金属的﹐要用20cm*10cm的金属纸包裹
(Requirement: The max leakage currents measured should exceed 0.5mA; If the enclosure is conductive, it is to be wrapped with a metal foil having an area of 20 by 10 centimeters.)
二测试结果(Test Result):
结论(Conclusion)