阀门样本

一、调节阀系列First、series regulating valve1、型号编制说明The model description：P普通型M密闭型P Normal type M Airtight typeD电动Q气动S手动D Motor-driven Q Pneumatic S Manual风阀高度H Air valve height H风阀宽度W Air valve widthW1 工作温度为－40℃~95℃2工作温度为－55℃~205℃1 the operating temperature -40℃~95℃ 2the operating temperature55℃~205℃D对开式P平行式D Vis-a-vis type P Parallel type创元风量调节阀chuangyuan air volume regulating valve1.1、型号示例model sample1：CYTD2－1000×500SP 表示创元普通型对开式多叶调节阀，工作温度为－55℃~205℃，宽1000mm，高500mmCYTD2－1000×500SP is Chuangyuan normal vis-a-vis multi-blade regulating valve, the working temperature is -55℃~ 205℃, width is 1000mm, the height is 500mm2、风量调节阀技术参数Air volume regulating valve technical parameters：2.1、风量调节阀框体和叶片采用镀锌钢板制成，无焊点，表面无需涂装；Air volume regulating valve frame and blade made by galvanized steel plates, no weld, the surface doesn’t need paint.2.2、风阀轴承材料为烧结青铜含油轴承，可以耐300℃的高温；The regulating valve bearing material is sintered bronze oiled bearings, can resist high temperature 300℃;2.3、叶片由10×10方形轴连接，轴的材料为45#镀锌钢；Blades are connected by 10×10 square shaft, the material of the bearing is 45# galvanized steel plates2.4、根据需要可选配可调节风量的执行机构；We can provide implement facility which can regulating the air volume by need.2.5、普通型阀体厚度标准尺寸L=210mm，密闭型阀体厚度标准尺寸L=180mm，也可根据客户需要生产各种特型尺寸；The standard thickness of the normal valve dimension is L=210, the standard thickness of the airtight valve dimension is L=180, customers may also choose a variety of special type size;2.6、风量调节阀的法兰宽度为30mm、40mm，客户可以根据需要选择；The width of the air regulating valve flange is 30mm、40mm,the user can make choice.2.7、密闭阀密封材料为橡胶。

The seal material of the airtight valve is rubber.3、风量调节阀分类以及特点The air volume regulating valve classification and characteristics：3.1、分为普通型风量调节阀、密闭型风量调节阀。

每种又有对开与平行式两种类型以及手动、气动、电动三种驱动方式；The air control valve is divided into normal air volume regulating valve、airtight air volume regulating valve. Each of them has two types, Off-style and parallel style, and they have three driven ways: manual, pneumatic, electric, manual;对开式与平行式选用的一般原则General selection principles of off-style and parallel:(a)当阀门所需调节的管段阻力大，而阀门消耗的阻力小时宜选用对开式，反之则应选用平行式；When tube resistance is big but the valve consumes small resistance, it is better to choose off-type on the contrary should choose parallel;(b)对开式的起始调节性能优于平行式；The off-type regulation is better than parallel style;(c)一般做开关用的风阀宜选用平行式；If the valve used as switch the parallel should be chosen;(d)当安装在两个系统的混合处时，宜选用相同特性的调节阀，且宜为对开式；When the valve installed in the mixture place of the two systems, it is better to choose the same characteristics valve, and off-type is better;(e) 对气流噪声有严格要求的系统宜选配平行式；There are strict requirements on the aerodynamic noise matching system, parallel way should be selected;（客户可根据需要选择相应的方式。

）(Customers can select the appropriate way.)3.2、风量调节阀的特点air volume regulating valve features：(a)风量调节阀的传动方式为连杆传动；Drive transmission mode of the air volume regulating valve is the connecting rods way;(b)普通型调节阀的漏风率不大与2%，密闭型调节阀的漏风率不大与0.5%；The leakage rate of the normal air volume regulating valve is no less than 2%, the leakage rate of the airtight air volume regulating valve is no less than 0.5%;(c)手动和电（气）动阀门一般为顺时针方向关闭，逆时针方向开启；Manual and electric (pneumatic) valve is generally clockwise, counterclockwise open;3.3、风量调节阀的结构尺寸The air volume regulating valve overall dimension3.3.1、普通型风量调节阀Normal air volume regulating valve结构尺寸the structure dimension：备注：（Note）（1）以上“√”尺寸为常用尺寸，也可根据客户需要生产各种特型尺寸。

（当W尺寸≥1250时，加中间框，叶片分隔。

）Note: The above "√" size is commonly used, but we can also produce various special sizes. (When W size ≥ 1250, add the middle frame, blades separated.)（2）L尺寸为210mm。

The dimension L is 210mm。

3.3.2、密闭型风量调节阀Airtight air volume regulating valve结构尺寸the structure dimension ：备注：（Note ）（1）以上“√”尺寸为常用尺寸，也可根据客户需要生产各种特型尺寸。

（当W 尺寸≥1250时，加中间框，叶片分隔。

）The above "√" size is commonly used, but we can also produce various special sizes. (When W size ≥ 1250, add the middle frame, blades separated.) （2）L 尺寸为180mm 。

The dimension L is180mm 。

二、防火、排烟阀门Fire、smoke damper1、型号编制说明The model description：风阀高度H Valve height H风阀长度W（圆形阀门以Φ表示）Valve length W(Φ is the sign of circular valve)功能Function控制方式Control way产品名称Product Name1.1、产品名称the product name ：FHF：防火阀；PHFH：排烟防火阀；PYF：排烟阀；PYK：排烟口fire damper PHFH: fire & smoke damper; PYF：smoke exhaust valve ;PYK：smoke exhaust outlet 1.2、控制方式Control way：W：熔断器控制自动关闭；Fuse control automatically turns off;S：手动控制关闭或开启；Manual control closed or open;D：电动控制关闭或开启；Electric control closed or open;Dc：电控电磁铁关闭或开启；Electric solenoid closed or open;Di：电控电机关闭或开启；Electric motor turned on or off;Dq：电控气动机构关闭或开启；Electronically controlled pneumatic facility to close or open;注意：排烟阀没有熔断器控制方式；Note: The smoke exhaust valve does n’t have fuse control;1.3功能Function：F：具有风量调节功能；With air volume regulating functionY：具有远距离复位功能；With remote reset functionK：具有阀门关闭或开启后阀门位置信号反馈功能；With the position signal feedback function after the valve closed or open valve;注意：排烟防火阀和排烟阀不要求风量调节功能；Note: The smoke &fire damper and smoke exhaust valves do not require air volume control function;1.4型号示例model sample：FHF WS-FK-500×500表示防火阀；具有温感控制功能；手动控制功能；具有风量调节功能；具有信号反馈功能；阀体有效长度为500mm，有效高度为500mm。