夜光Brinyte潜水手电筒DIV15使用说明书(英文版)

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

Brinyte DIV15 Operation Instructions

This hand-held diving flashlight use CREE XM-L2(U3), maximum output is 3800 lumens. The head side-push on/off magnetic switch is convenient to operate under water. It works by use of 3*32650 rechargeable lithium batteries, with three output modes- low mode, medium mode and high mode, up to 2 hours runtime in high mode. Besides, three O rings waterproof protection, excellent sealing design together with 5mm thickness tempered glass guarantee this diving light can withstand underwater depth 200 meters. With a beam angle of 11 degrees, it is absolutely one of the necessary back-up lights for your professional and leisure diving.

◆Technical Parameters:

ANSI High Medium Low Strobe SOS Lumen Output 3800lumens 1600lumens 450 lumens / / Runtime 2 Hours 5.2Hours 18Hours / / Luminous Intensity 40000cd

Beam Distance 40m

Drop Test 1.5m

IP Grade IPX-8 underwater 200m

Net Weight 455g(without battery)

Underwater Weight 335g(with battery)

These parameters above have been tested under laboratory conditions, so they may vary between different batteries and environments.

◆Product Specifications:

-Utilize Cree XM-L2(U3) LED, lifespan is over 50,000 hours;

-Uses 2* 32650 rechargeable lithium batteries;

-Regulated power supply can maintain constant current output;

-Over-heat protection, preventing the high temperature from influencing the normal use;

-Low voltage warning function to remind the user to change the batteries;

-Reverse polarity protection to prevent from installing battery wrong;

-Side-push on/off magnetic switch, three output modes, very easy to operate;

-Three O rings design to ensure its waterproof function underwater 200 meters;

-The crust is made of T6061 Aircraft-grade aluminum;

-Premium type III military hard-anodized finish for abrasion and corrosion resistance;

-5mm Toughened glass can stand higher water pressure resistance;

-Alloy aluminum SMO reflector;

-Dimensions: 62(Head dia.)*40(Body dia.)*226(Length )mm*455g(net weight);

-Underwater Weight: 335g (with battery);

-Standard accessories: 3 spare O-rings, Lubricant, lanyard, user manual and Neutral box;

-Other accessories (optional): gift box, battery,charger, ball joint, light handle.

◆Operation:

a) Battery installation

Keep the positive pole direction of battery same as the light head, tighten the head to turn on the light.

b) Push the magnetic switch to turn on/off the light and change modes.

放DIV15图片

Note:

1) The side-push on/off switch has 5mm safety action design, please push the switch to the

bottom and back to turn on/off and change modes.

2) To ensure the magnetic switch work normally, please keep the flashlight away from any

magnetic goods, iron things and etc.

3) All of the connection sections(except the switch) are sealed before shipment, Please don’t

arbitrarily disassemble it.

4) Avoiding the possibility of seeping water, we suggest you tighten the flashlight before

diving.

5) Please take the batteries out of the flashlight if you didn’t use it for long time, or the

flashlight may be damaged by reason of the battery leakage or explosion.

◆Flashlight maintenance:

1) Please immerse the diving flashlight in the fresh water for few minutes after diving every time and clean the flashlight after immersing;

2) Please put lubricating oil on the switch parts after diving

3)Please don’t drop or place your div ing flashlight in sands, in case the sands go into the switch parts or screw threads parts.

4) Please keep inspecting the O-rings oftenly, please change a new one once they are damaged.

5) Please periodically clean the conductive contact surfaces, ensure the flashlight work normally.

◆FAQ and Self-check:

When the flashlight unusually or does not work, it might be the reasons below

1) The battery power is too low-----please change new batteries

2) The screw threads or conductive contact parts are dirty----please clean them with alcohol

solution.

Please contact the local dealers for warranty if the flashlight still does n’t work according to the above methods.

◆Friendly tips:

The flashlight has a high brightness, please DO NOT shine people naked eyes or look at the light directly in case of damaging the eyesight, especially for children.

相关文档
最新文档