网口220V压敏电阻B72207S 141K202
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
SIOV- S07K140S2M3,2 Ordering code: B72207S0141K202 Data sheet
Form: FBLE3K/b
File name: S07K140S2M3,2_a.pdf
MODIFICATIONS: New issue
REMARKS:
signed: PE / Schwingenschuh Martin signed: QS / Stephen Yi Prepared by Steven Xu Release
signed: signed:
SIOV- S07K140S2M3,2
Ordering code: B72207S0141K202
Data sheet
SIOV nomenclature
S = Disk type
07 = Rated disc diameter
K = Tolerance of V V at 1mA : ±10% 140 = Max. AC voltage S2 = Crimp design
M3,2
=
Customized lead length; nominal value: 3,25mm
Figure:
Dimensions given in Millimeters (mm)
Electrical data:
Max. operating AC voltage V RMS
=
140V Max. operating DC voltage V DC = 180V Surge current (8/20µs) 1 time I max = 1200A Energy absorption (2ms) 1 time W max = 10J Average power dissipation P max = 0,25W
Varistor voltage at 1mA V V = 220V ± 10% Clamping voltage at 10A (8/20µs) V C,max = 360V Typ. capacitance at 1 kHz C = 180pF
Note: More details can be found in the data book 'SIOV Metal Oxide Varistors', Ordering No. EPC: B62002-7600
b max = 9,0 h max = 12,0 s max = 3,7
e = 5,0 ± 0,5 a = 1,7 ± 1,0 l = 3.25 ± 0.25 ∅d
=
0,6 ± 0,05
1) seating plane in accordance with IEC 717
1)
SIOV- S07K140S2M3,2 Ordering code: B72207S0141K202 Data sheet
V/I Characteristic:
Derating:
0,1
1
10
100
1000
10000
10100100010000
t r [祍]
SIOV- S07K140S2M3,2 Ordering code: B72207S0141K202 Data sheet
Reliability Data:
(8/20µs) illustrated below applied.
100 surge currents (8/20 µs), unipolar, interval
30 s, amplitude corresponding to derating curve
for 20 µs
100 surge currents (2ms), unipolar, interval
120s, amplitude corresponding to derating curve
for 2ms
SIOV- S07K140S2M3,2
Ordering code: B72207S0141K202
Data sheet Characteristics Test Methods/Description
Specifications M
Tensile strength
After gradually applying the force specified
below and keeping the unit fixed for 10 seconds, the terminal shall be visually examined for any damage. Terminal diameter Force 0.5 mm 5 N 0.6 mm 10 N 0.8 mm 10 N 1.0 mm 20 N | ∆ V/V (1 mA) | ≤ 5 %
No break of solder joint, no wire break
E C H Vibration
After repeatedly applying a single harmonic vibration according to the table below.
Thereafter, the unit shall be visually examined.
frequency range: 10 .... 55 Hz amplitude: 0.75 mm or 98 m/s² duration: 6 h (3 x 2 h) pulse: sine wave | ∆ V/V (1 mA) | ≤ 5 %
No visible damage
A N I C A L
Solderability
After dipping the terminals to a depth of approximately 3 mm from the body in a soldering bath of 235°C for 5 seconds, the terminals shall be visually examined.
The inspection shall be carried out under adequate light with normal eyesight or with the assistance of a magnifier
capable of giving a magnification of 4 times to 10 times. The dipped surface shall be covered with a smooth and bright solder coating with no more than small amounts of scattered
imperfections such as pinholes or un-wetted or de-wetted areas. These
imperfections shall not be concentrated in one area.