辐照交联硅橡胶自粘带

辐照交联硅橡胶自粘带

产品详细说明

辐照交联硅橡胶自粘带

Irradiation Vulcanization Silicone Rubber Self-adhered Tape

产品描述Introduction:

硅橡胶自粘带采用独特的配方辐照交联生产,24 小时之内实现自身粘合，提供一个绝缘屏障，可以防潮湿、防氧化、防臭氧和防电晕，在-60～250℃下长期工作。

Irradiation vulcanization silicone rubber self-adhered tape self-adhered in 24hours can provide the performance of moisture resistance,oxidation resistance, anti-ozone, anti-corona. It can work at the temperature from -60℃ to 250℃.

复合绝缘热缩带（FJRD）的升级替代产品

The advanced substitute of Waterproof, Insulating, Composite Adhesive Tape (FJRD)

产品特点Features：

l 高绝缘：独特的配方辐照交联，具有高绝缘和极佳的自融性，兼具防潮、防氧化、防臭氧和紫外线，以保证持续的高绝缘值。

Excellent insulation: with special formulation, it is insulated, self-integrated, damp-proof and antioxidant.

l 安装方便：无需加热，无需明火，无需专用工具，无需拆卸螺丝，适合各种温

度环境施工，快捷方便，用时短，可最大限度的缩短安装时间。

Convenient installation: not using fire or special tools, it can be fast installed.

l 性能可靠：具有优良的物理、化学、电性能。

Reliable Capability: Excellent physical, chemical and electrical properties.

l 高阻燃性：本身固有阻燃作用，燃烧时生成无导电性的灰烬。

Flame-resistance: It is flame-resistant itself, without burning ash.

l 特殊性能：缠绕在复杂形状周围，24 小时之内实现自身粘合，密合良好、均匀平滑美观；表面触摸时保持不粘手，不粘合到其他表面或者底物之上；具有减振、隔热、抗机械冲击和抗电晕性能。

Special capability: It is self-integrated in 24hours without adhere with other things, so it can provide the damping, adiabatic, impact resistant, corona resistantcapabilities.

应用Application:

l 变电站及电厂内所有带电裸露部分：户内、户外母线、开关母线、柜上母线、手车母线及其它需绝缘防护的部位，是降低电力设备运行安全隐患的最有效、方便的方式。

Used for electriferous bare conductor of transformer substation or power plant.

l 各项指标优于复合绝缘热缩带，尤其适于变电站综合绝缘防护；

With more excellent properties than FJRD, it is especially fit for insulating protection of

transformer substation.

l 可对任意形状的带电体进行绝缘防护且无需自由端，实用性强；

Used for charged body of random geometry without free end.

l 军工产品广泛使用：飞机发动机的电气插头绝缘和发电机接线处；潜水艇电机、油库H级电机的引出接线头；H类干式变压器、互感器等的绝缘层、屏蔽层等。

Used for military products: engine socket or connection of aircraft; connection of submarine engine or oil depot H-grade engine; insulating layer or shielding layer of H-grade dry-type transformer.

l 矿山、油田、化工等不能使用明火场所的电力系统绝缘防护。

Used for Insulation protection of electric power system without fire.

产品性能Properties

试验项目Test Item

要求

Requirements

实测值

Results

测试方法

Test method

抗张强度

Tensile strength

＞2.5 Mpa 3.2 GB/T1040 拉断伸长率

Ultimate elongation

＞500% 660 GB/T1040

耐热性：100℃/168h Thermal aging

不开裂，不变形，无可见气泡

No crazing, distortion and obvious air

bubble

通过

Pass

GB/T7141

自粘性（室温﹑水中24小时）

Self-adhesiveness (room temperature, in water, 24h)

不松脱，层间无水

Not releasing, No water between layers

通过

Pass

通过

Pass

工频介电强度

Dielectric strength

＞30 KV/mm 35 GB/T1408 体积电阻率

V olume resistivity

＞1×1014Ω·cm 4.8×1014GB/T1410 介质损失角正切

Dielectric loss tangent

＜0.035 0.018 GB/T3048.11