74-2硬膜防锈油MSDS报告(英文)

HARD-COAT ANTIRUST OIL

MSDS NO.:AJT131204029E

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: Hard-coat antirust oil Product Type ： 74-2 Product Use: Metal finishing

Supplier Information Company Name: Hengshui Xiya Petrochemical Industry Co., Ltd. Address: No.8 East Beihuan Rd, Hengshui City, Hebei Province, China, 053000 Tel: 0086-318-2878005 Fax: 0086-318-2878006 Emergency Telephone: 0086-318-2139278

2. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW: Physical State and Odor:

Brown and red liquid with solvent naphtha odor

The product is classified as dangerous according to China GB13690-92. Hazard Classification: Category 3.3

Routes of Entry: Inhalation, skin and eye contact and ingestion. Health Hazard:

Eye Contact: Can cause eye irritation, redness, tear and blurring of vision.

Inhalation: Inhalation of vapors may cause irritation of nose and respiratory tract, dizziness, weakness, tiredness and headache, even loss of consciousness.

Skin Contact: Can cause skin irritation and dermatitis, prolonged contact can cause skin chapped and degreasing. Ingestion: Can cause irritation to gastrointestinal tract, nausea, vomit and diarrhea.

3. COMPOSITION/INFORMATION ON INGREDIENTS

Substance/Preparation:

Preparation

Ingredients Name

Content /% CAS NO.

EC NO.

RISK PHRASES

Barium mahogany sulfonate 25 61790-48-5 263-140-3 - Phenolic resin

25

25085-50-1 -

-

Benzotriazol 0.5

95-14-7 202-394-1 -

HARD-COAT ANTIRUST OIL

MSDS NO.:AJT131204029E

Solvent naphtha Rest Mixture - -

Note: See Section 8 of MSDS for exposure limit data for these ingredients. Full text of risk phrases appearing in

section 3: see section 16.

This MSDS contains valuable information critical to the safe handling and proper use of the product. This MSDS should be retained and available for employees and other users of the product.

4. FIRST AID MEASURES

Eye Contact: Flush skin with plenty of water for at least 15 minutes. Get medical attention if persistent irritation occurs.

Inhalation: Immediately move the patient to fresh air and keep smooth breathe. Give Oxygen if hard breathing difficulty occurs. Immediately take artificial respiration if respiratory arrest. Get medical attention.

Skin Contact: Remove contaminated clothing immediately, wash off with plenty of flowing water and sour or special cleaning solvent.

Ingestion: Immediately make victim drink enough water. Do not induce vomiting, and get medical attention.

5. FIRE FIGHTING MEASURES

Fire Hazard Overview: Flash Point: 10℃ (Open Cup) Flammability: Flammable.

Extinguishing media: Carbon dioxide, dry chemical and foam.

Precautions for Fire Fighting: Cool down containers in the fire site with water spray. Firefighters must wear ventilation mask or self-contained breathing apparatus.

Hazardous Combustion Products: Toxic smog like Carbon monoxide, carbon dioxide and NOx.

6. ACCIDENTAL RELEASE MEASURES

Take ventilation for release area, remove fire source and avoid inhalation of vapor. Cover with foam if large release so as to induce vapor hazards. Absorb with sand or other similar materials. Disposal shall be in accordance with requirements of environment protection department.

7. HANDLING AND STORAGE

Handling Considerations: Adopt reasonable ventilation, and avoid eye and skin contacts. Storage temperature shall be lower than 30℃. Empty containers shall be not burned or cut. Stay away from heat and fire source, and prevent