晖春站6502电气集中工程设计--大学毕设论文

石家庄铁道大学毕业设计

春晖站6502电气集中工程设计Chunhui Station 6502 Electric engineering design

2012届高等技术学院

专业铁道通信信号

学号 20095201

学生姓名王光锐

指导教师胡晓娟

完成日期 2012年 5 月日

毕业设计成绩单

毕业设计任务书

摘要

近年来,全路电务系统的技术装备水平有了较大提高,装备数量有了大幅度的增

长。目前全路绝大部分车站已采用了电气集中联锁设备。

6502电气集中把全站的道岔、进路和信号机集中起来控制和监督，实现了站内

行车指挥的自动控制；是实现铁路现代化的重要基础设备之一；是一种安全、高效、

经济的车站联锁设备。6502电气集中能准确及时的反应现场行车情况，控制迅速，

因而大大提高了车站作业效率和行车安全程度，并且改善了劳动条件。

本设计所选站场为模拟车站—春晖站，该站场包括2条股道，以下行咽喉设计为

主。其中ⅠG为正线，且为客货列车到发进路，可走超限货物列车。下行咽喉共布置

信号机4架，其中调车信号机2架，编号为D1、D3；进站信号机一架编号为X，出站

信号机一架编号S

；道岔为一个且为双动道岔。论文详细介绍了工程设计有关图纸Ⅱ

的设计原理与方法，共由六章组成。所设计的内容主要包括：信号平面布置图、联锁

表的编制、控制台盘面布置图、组合连接图和组合排列表、选择组电路、执行组电路

六项内容。

此次设计由于设计者知识能力与思想水平有限，论文中的错误和不足之处恳请希

望老师给予批评指正。

关键词：春晖站 6502电气集中车站信号工程设计

Abstract

In recent years, the technical equipment of the electrical supply system of the whole road has been greatly improved and the number of equipment has been a substantial increase. The vast majority of the whole railway stations have been using electrical interlocking device.

6502 Electric station turnout, centralized approach and signals the control and supervision, to achieve the automatic control of the traffic control station; is one of the important infrastructure for the modernization of railways; is a safe, efficient and economical station interlock device. 6502 Electric accurate and timely response to the site operating conditions, control quickly, thus greatly improving the station operational efficiency and traffic safety, and improved working conditions.

Selected stations of the design field for the analog station - Chunhui station, the station consists of two shares of Tao, the following line in the throat design of the main. Which Ⅰ, G is a positive line, and for passenger and freight trains to the hair into the road, go gauge freight train. Downstream throat were arranged signal 4, shunting signal 2, No. D1, D3; pit signal a number of X-outbound signal a Number S-II; turnout for an action switch and a dual . The paper details the design principles and methods of engineering drawings, consists of six chapters composed. The contents of the design include: signal layout plan, the interlocking table preparation, console, disk layout map, combined connection diagram and combinations of rows of the list, select group of circuits, the implementation of the six elements of the group circuit.

The design because the designers knowledge and ability is limited to the ideological level, the errors and inadequacies in the paper urge the teacher to give criticism correction. Key words: The Chunhui Station 6502 Electric Station signal engineering design