拉 丝 润 滑 剂 WIRE DRAWING

< 4,00 mm 15,0 %
11
DRAWLUB ST 180
粘度/40°C = 170 mm2/s
a
不含氯。 适用于钢和铬合金钢以及弹簧钢 线的拉伸。
1
ROD-BREAKDOWN +Intermediate wire Emulsions for copper and copper alloys
线径 Wire
浓度 Conc.
> 0,15 mm 08,0 % < 15,0 mm 20,0 %
2
DRAWLUB C 200 Series
特别适用于表面需涂覆和电镀的中拉 和多头拉丝的铜线拉丝乳化液。
用于铝和铝合金线材拉伸的润滑脂。 特别适用于单模或多模拉丝机。
*熔点/MP > 0,90 mm + 51 °C
Grease for wire drawing on aluminium and its alloys. Especially for draw-benches and block machines
> 0,10 mm 05,0 %
Emulsions, especially for INLINE magnet wire, fine wire, MULTI-WIRE as well as flat rolling
< 3,50 mm 15,0 %
铜线拉丝油 COPPER WIRE DRAWING
种类 Category
> 0,10 mm 05,0 %
MULTI-WIRE + intermediate wire Emulsions especially for coated and plated copper
< 3,50 mm 15,0 %
3
DRAWLUB C 300 Series
特别适用于联机漆包线生产，小拉和 多头拉丝机以及铜扁线轧制的乳化液。
线径 Wire
粘度/40°C [mm2/s]
7
ISOLUBE 4620 ISOLUBE 4640 ISOLUBE 4660
适用于纯铝和铝合金线材拉伸的
高性能半合成型纯油。特别适用
于多头拉丝机，抗氧化性能极佳，
25,0
消耗量低。
> 0,15 mm
40,0
< 6,50 mm Semi-synthetic high performance wire drawing neat oils
线径 Wire
浓度 Conc.
10
DRAWLUB ST 100 Series
不含矿物油的水溶性拉丝润滑液。 适用于镀锌和镀铜钢丝的湿拉过程， 线材表面光亮佳。
> 0,05 mm
03,0 %
Mineral oil-free, water miscible lubricant for wet wire drawing of zinc and copper coated / plated steel wire, as well as bare wire
The PETROFER product line does not only offer stamping oils which evaporate free of residues, but also cold forming oils for heavy duty forming operations, fin-stamping oils for the manufacture of heat exchangers and electric motors, wire drawing fluids for copper, steel and aluminium and fine-blanking oils for the production of automotive clutches. In addition there are hot and cold rolling fluids for metal forming operations on sheet metal.
德润宝的金属成型加工产品包 括纯油型，膏状型，乳化型，合成 型冷却液和溶剂型产品。我们特别 开发了具有高效生产率的、应用于 如下各种不同金属成型加工方式的 产品，如冲压，精密冲裁，深度拉 拔，碾压，拉丝，重负荷冷成型， 冷锻，金属旋压，成形，冲孔，弯 曲，热轧和冷轧以及螺纹成型。
德润宝的产品不仅包括挥发无 残留的冲压油，还有用于重负荷型 成型加工的冷挤压油，用于制造热 交换器翅片和电动机钢片的冲压 油，用于铜线、钢线和铝线的拉丝 油和用于汽车离合器的精密冲裁 油。此外，德润宝还能够提供用于 金属薄片成型加工的热轧和冷轧 液。
61,0 for pure aluminium and AL-alloys, especially for MULTI-
WIRE machines, very good resistance against oxidation,
low consumption
8
ISOLUBE 4600 Series
适用于铝和铝合金线材拉伸的高 性能纯油。 适合各种类型的拉丝机。
High performance wire drawing neat oils for aluminium and AL-alloys. For all types of machine design
130 > 0,90 mm
220
530 < 9,50 mm
1040
9
ISOLUBE MG Series
> 0,015 mm 01,0 %
Synthetic solutions for fine wire and extra fine wire, as well as MULTI-WIRE and INLINE magnet wire
< 0,45 mm 11,0 %
5
DRAWLUB C 500 Series
粘度/100 < 9,50 mm 16,0
*熔点按照 DIN ISO 2176 *Meltingpoint according DIN ISO 2176
钢丝拉丝油 STEEL WIRE DRAWING
种类 Category
产品 Product
应用范围 Application range
Fe
钢 +合金 +涂层/电镀 + Steel + alloys + coated / plated +
半合成溶液，适用于细线和微细 线拉伸，润滑性好。
> 0,050 mm 01,0 %
Semi-synthetic solutions, for fine wire and extra fine wire Very good lubrication
< 1,20 mm
11,0 %
6
a
DRAWLUB C 900 Series
德润宝的产品适用于钢、铝、 铜及其合金的金属成型加工，也适 用于不锈钢和钛合金加工。此外， 通过兼容性试验，某些产品是通用 的，如制冷系统中的不含氟氯化碳 的冷却液。
作为德润宝全面综合产品的补 充，我们还有防锈剂，工序间清洗 剂和各种维护用产品。
PETROFER manufactures more than 600 different products and to demonstrate the variety of our range we have outlined below the principal applications and markets. Leading companies in the automotive and aerospace industry and suppliers to these industries rely on PETROFER for their production processes as well as industries such as steel production, foundries, heat-treatment shops and bearing manufacturers.
粘度/40°C = 60 mm2/s 适用于铜和铜合金线材拉伸的拉丝 油。如：电车线。表面光亮，消耗量 低，使用寿命长。
Drawing oil for copper and Cu-alloys e.g. for trolley profile wire, very bright surface, low consumption, long service life
PETROFER's range of fluids for metal forming operations includes neat oils, pastes, emulsions, synthetic coolants and solvent based formulations. Our products have been specifically developed to provide the highest productivity for various metal forming processes such as stamping, fine-blanking, deep drawing and ironing, wire drawing, heavy duty cold forming, cold forging, metal spinning, profiling, hydroforming, perforating, bending, cold and hot rolling as well as thread forming applications.
> 0,10 mm < 20,0 mm
100 %
铝线拉丝油 ALUMINIUM WIRE DRAWING
种类 Category
产品 Product
应用范围 Application range
AL
铝 +合金 +涂层/电镀 + Aluminium + alloys + coated / plated +
产品 Product
பைடு நூலகம்
应用范围 Application range
Cu
铜+合金 + 涂层/电镀 + 漆包 + Copper + alloys + coated / plated + enamelled +
线径 Wire
浓度 Conc.
4
DRAWLUB C 400 Series
合成型溶液，适用于细拉、微拉 及多头拉丝和联机漆包线的拉伸过程。
The comprehensive PETROFER product line is complemented by our range of rust preventives, process cleaners and maintenance products.
铜线拉丝油 COPPER WIRE DRAWING
PETROFER's fluids are suitable for metal forming operations on steel, aluminium, copper and ist alloys, as well as for stainless steels and titanium alloys. In addition, compatibility test results are available for several products and processes e.g. in the field of refrigeration systems for CFC-free coolants.
拉丝润滑剂 WIRE DRAWING
PETROFER
产品和应用 PRODUCT AND APPLICATION
德润宝公司拥有600多种产品， 我们能够向您展示各种产品的不同 应用和市场。德润宝是汽车、航空 及其零部件行业的领导企业的主要 供应商，同时也是众多行业，诸如 钢铁生产企业，铸造、热处理和轴 承制造商的重要合作伙伴。
种类 Category
产品 Product
应用范围 Application range
Cu
铜+合金 + 涂层/电镀 + 漆包 + Copper + alloys + coated / plated + enamelled +
适用于铜及铜合金大拉、中拉拉 丝设备的拉丝乳化液。
DRAWLUB C 100 Series