自升压标准电压互感器简介
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
Ⅰ. main characteristics.
35kV, 0.05 level voltage transformer is an voltage transformer which has high voltage, high accuracy, can check the voltage transformer of below 0.02 level,
35kV/100V 35kV/3/100/3V. Voltage transformer check voltage from 20% to 120% of the rated voltage. When the twice voltage is 100V could with twice load of 0.25VA.
Ⅱ. Technical index
1. Rated voltage ratio: 35 kV /100V、35kV/3/100/3V
2.Rated twice capacity: 0.2V A, 0.07V A, 0.02V A CosФ=1.0
3. Degree of accuracy:0.05level,0.1level In rated load conditions, when the voltage within the scope of 80%Un to 120% Un ,Ratio error less than ±0.02%, Angular error less than ±0.6’;when voltage is 50%Un, Ratio error less than ±0.03%, Angular error less than ±0.9’; when voltage is 20%Un, Ratio error less than ±0.04%, Angular error less than ±1.2’.( The actual error is not more than the error limit of 70%)
4. test voltage once winding pressure sensing voltage is 1.2 Un, 1 min, twice winding to ground, power frequency withstand voltage 2kV, 1 minutes
5. Rated frequency:50Hz
Ⅲ Wiring diagram
35kV, 0.05 level voltage transformer can check the voltage transformer which below 0.1 level, test ratio is 35kV/100V、35kV/3/100/3V.Checking circuit see the figure below:
1.Double stage voltage transformer check voltage transformer wiring diagram
NOTE:When check voltage transformer,once check X must be grounding.
Be tested transformer twice x also should be grouding,
Measured voltage transformer add x voltage load box on middle
2.V oltage transformer check voltage transfoemer wiring diagram
3.V oltage transformer slef-collation wiring diagram
4.V oltage transformer check voltage transfoemer wiring diagram
ⅣAfter-sale service
Users which buy this product are enjoying the following after-sale service:
1.Within three months of the date since the products sold, if there is any quality
problems, free of charge by the company to replace the new product, but the user can not disassemble.
pany free repair products while appear any quality problems within a year.
3.Our company is responsible for the long-term repair, appropriate to charge the
cost of materials after one year.
4.If the product break, should invite professional or mail to our company repair,
never attempt to disassemble the product.Otherwise,our company is not responsible as it cause any damage.