汽车用LED大灯标准

10. Conformity of production .......................................................................................13
11. Penalties for non-conformity of production .............................................................13
} E/ECE/324
E/ECE/TRANS/505
Rev.1/Add.49/Rev.2
18 February 2009
AGREEMENT
CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED
Addendum 49: Regulation No. 50
Revision 2
Incorporating all valid text up to: Supplement 8 to the original version of the Regulation - Date of entry into force: 9 November 2005 Corrigendum 1 to Revision 1 of the Regulation, subject of Depositary Notification C.N.345.2005.TREATIES-2 dated 9 May 2005 (English and Russian only) Supplement 9 to the original version of the Regulation - Date of entry into force: 4 July 2006 Supplement 10 to the original version of the Regulation - Date of entry into force: 2 February 2007 Supplement 11 to the original version of the Regulation - Date of entry into force: 11 July 2008 Supplement 12 to the original version of the Regulation - Date of entry into force: 15 October 2008
"Front position lamps, rear position lamps, stop lamps, direction indicator lamps and rear-registration-plate illuminating devices of different types" means lamps which differ, in each said category, in such essential respects as: (a) The trade name or mark, (b) The characteristics of the optical system (levels of intensity, light distribution
1.
2. 2.1.
2.2.
2.3. 2.4. 3. 3.1. 3.1.1. 3.1.2. 3.1.3.
E/ECE/324 E/ECE/TRANS/505 Regulation No. 50 page 5
ຫໍສະໝຸດ Baidu
} Rev.1/Add.49/Rev.2
SCOPE
This Regulation applies to front position lamps, rear position lamps, stop lamps, direction indicators, and rear-registration-plate illuminating devices for vehicles of category L 1/.
14. Transitional provisions ............................................................................................14
E/ECE/324 E/ECE/TRANS/505 Regulation No. 50 page 4
Annex 3: Arrangement of the approval mark
Annex 4: Photometric measurements
Annex 5: Colours of lamps: chromaticity co-ordinates
Annex 6: Photometric measurements for the rear-registration-plate illuminating device
2. Definitions ...............................................................................................................5
3. Application for approval ...........................................................................................5
REAR-REGISTRATION-PLATE ILLUMINATING DEVICES FOR VEHICLES OF CATEGORY L
CONTENTS
REGULATION
Page
1. Scope .......................................................................................................................5
GE.09-
E/ECE/324 E/ECE/TRANS/505 Regulation No. 50 page 3
} Rev.1/Add.49/Rev.2
Regulation No. 50
UNIFORM PROVISIONS CONCERNING THE APPROVAL OF FRONT POSITION LAMPS, REAR POSITION LAMPS, STOP LAMPS, DIRECTION INDICATORS AND
UNIFORM PROVISIONS CONCERNING THE APPROVAL OF FRONT POSITION LAMPS, REAR POSITION LAMPS, STOP LAMPS, DIRECTION INDICATORS AND
REAR-REGISTRATION-PLATE ILLUMINATING DEVICES FOR VEHICLES OF CATEGORY L
4. Markings .......................................................................................................................6
5. Approval ..................................................................................................................7
12. Production definitely discontinued ..........................................................................13
13. Names and addresses of Technical Services responsible for conducting approval tests, and of Administrative Departments .................................................................14
6. General specifications ...............................................................................................9
7. Intensity of light emitted .........................................................................................10
DEFINITIONS
Definitions of terms:
The definitions given in Regulations Nos. 53 or 74 and the series of amendments in force at the time of application for type approval shall apply to this Regulation.
8. Test procedure ........................................................................................................12
9. Colour of light emitted ...........................................................................................13
_________
UNITED NATIONS
∗/
Former title of the Agreement:
Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958.
} Rev.1/Add.49/Rev.2
ANNEXES
Annex 1:
Minimum horizontal (H) and minimum vertical (V) angles for spatial lamp distribution
Annex 2:
Communication concerning the approval (or refusal or withdrawal of approval or production definitely discontinued) of a type of device pursuant to Regulation No. 50
AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS
OF THESE PRESCRIPTIONS ∗/
(Revision 2, including the amendments which entered into force on 16 October 1995) _________