MY1B40G-210资料下载

合集下载

GB402AHYBBMLB-V01中文资料

JEWEL HILL ELECTRONIC CO.,LTDJEWEL HILL ELECTRONIC CO.,LTD.SPECIFICATIONS FORLCD MODULEModule No. GB402AOffice Address: Rm. 518,5/F., 101 Shangbu Industrial District,HuaqiangNorthRoad, Shenzhen, ChinaTEL : (86)-755-83362489 83617492FAX: (86)-755-83286396 83365871E-mail: sales@jhlcd@Website: TABLE OF CONTENTSLCM NUMBER SYSTEM (2)1. GENERAL DESCRIPTION (3)2. FEATURES (3)3. MECHANICAL SPECIFICATION (3)4. MECHANICAL DIMENSION (4)5. MAXIMUM RATINGS (5)6. ELECTRICAL CHARACTERISTICS (5)7. MODULE FUNCTION DESCRIPTION (6)8. ELECTRO-OPTICAL CHARACTERISTICS (12)9. RELIABILITY (16)10. PRECAUTIONS FOR USING LCD MODULES (17)11. USING LCD MODULES (19)12. REVISION HISTORY (21)SAMPLE APPROVED REPORT (22)LCM Number SystemNUMBER OF CHAR. PER LINE F: FSTN; X: OTHER VERSION NUMBER: V00~V99IC TYPE:VIEWING DIRECTION:TEMPERATURE RANGE:BACKLIGHT TYPE:SERIAL NUMBER: A~ZGRAPHIC MODULEs: NUMBER OF COMMONs GRAPHIC MODULEs:NUMBER OF SEGMENTs COB & SMT LCMBACKLIGHT COLOR:CHARACTER MODULEs:CHARACTER MODULEs: NUMBER OF LINE G: REFLECTIVE,NONE BACKLIGHT A: TRANSFLECTIVE, EL BACKLIGHT B: TRANSMISSIVE, EL BACKLIGHT C: TRANSFLECTIVE, LED BACKLIGHT D: TRANSMISSIVE, LED BACKLIGHT E: TRANSFLECTIVE, CCFL BACKLIGHT F: TRANSMISSIVE, CCFL BACKLIGHT A: AMBER; B: BLUE; Y: YELLOW-GREEN R: RED; W: WHITE; O: THER COLOR N: NORMAL TEMPERATURE RANGE U: UPPER(12:00); D: DOWN(6:00)L: LEFT(9:00); R: RIGHT(3:00);A: BONDING IC, WITH CONTROLLER B: BONDING IC, WITHOUT CONTROLLER C: SMT IC, WITH CONTROLLER D: SMT IC, WITHOUT CONTROLLER O: OTHER TYPEW: BLACK-WHITE; O: OTHER G: GRAY; Y: YELLOW-GREEN; B: BLUE; LCD COLOR MODE:N: TN; H: HTN; S: STN LCD TYPE:S: SUPER WIDE TEMPERATURE RANGE W: WIDE TEMPERATURE RANGEM: MIDDLE TEMPERATURE RANGE1. GENERAL DESCRIPTIONThe GB402A is a 40C x 2L Character LCD module. It has a STN panel composed of 200 segmentsand 16 commons. The LCM can be easily accessed by micro-controller via parallel interface.2. FEATURESTransflective and positiveDisplay ModeSTN(Yellow - Green) moduleDisplay Format Character 40C x 2LInput Data 8/4-bit parallel data input from MPUMultiplexing Ratio 1/16 DutyBiasBias 1/5Viewing Direction 6 O’clockBacklight LED3. MECHANICAL SPECIFICATIONItem Specifications Unit Dimensional outline 182.0 x 33.5 x 12.8(max) mmResolution 200segs x 16coms dotsActive area 147.5(W) x 11.5(H) mmChar. pitch 3.7(W) x 5.95(H)Char. size 3.2(W) x 5.55(H)Dots pitch 0.65 (W)×0.7(H) mmDots size 0. 6(W)×0.65(H) mm4. MECHANICAL DIMENSION5. MAXIMUM RATINGSItem Symbol Min Max Unit NoteV DD - V ss -0.3 7.0 V Supply voltage V LCD -0.3 13.0 V Input Voltage V IN -0.3 V DD +0.3 VOperating temperature T OPR -10 +60 Storage temperature T STR -20 +70Humidity --- --- 90 %RH6. ELECTRICAL CHARACTERISTICSItem SymbolCondition Min. Typ. Max. UnitSupply Voltage Logic V DD------ 5.0 --- VH level V IH 0.8V DD --- V DDInput VoltageL levelV IL --- V SS --- 0.2V DDVCurrent Consumption(LCD DRIVER)I DDV DD =5.0V;V LCD =4.3V,T amb =25 ;--- --- 1.0 mALCD Driving Voltage V LCDBias=1/5V LCD =V DD -V O--- 4.3 --- VCurrent Consumption (With LED BackLight)I LEDV DD =5.0V;V LED =4.2V,T amb =25 ;--- --- 200 mA7. MODULE FUNCTION DESCRIPTION7.1. PIN DESCRIPTIONPin No. Symbol Description1 VSSPower supply for Ground (0V)2 VDDPower supply for positive (+5V)3 VOLCD driver voltage regulation terminal4 RSData/Command register selection; “H”: Data; “L”: Command5 R/WRead/write selection signal, ”H”: Read; ”L”: Write6 ERead/write Enable signal input pin7 DB08 DB19 DB210 DB38-bit bi-directional data bus11 DB412 DB513 DB614 DB715 LED+Power supply voltage for backlight positive16 LED-Power supply voltage for backlight negative7.2 TIMING CHARACTERISTICS1. SYSTEM BUS READ/WRITE CHARACTERISTIC7.3 APPLICATION OF LCMReference circuitCircuit Block Diagram7.4 TABLE OF COMMAND7.5 CHARACTER GENERATOR ROM8. ELECTRO-OPTICAL CHARACTERISTICSItem Symbol Condition Temp Min Typ. Max UnitsNote4.2 4.5 4.825 4.0 4.3 4.6 LCD driving voltageV LCD = = 050 3.8 4.1 4.4 V NOTE1Rise Time (Tr) --- --- -- Decay Time (Tf)0 --- ---- --- Rise Time (Tr) --- 225 340Decay Time (Tf) 25 --- 240 360Rise Time (Tr) --- --- -- Response TimeDecay Time (Tf)= = 0 50 --- --- --msec NOTE2Contrast Ratio Cr= = 0 255 10 --- --- NOTE4Viewing AngleRange( = 0°)(6”) = 90°(3”) =180°(12”) =270°(9”)(25 ) CR ≥250 35 20 30DegNOTE3z For panel only․Electro-Optical Characteristics Measuring Equipment(DMS501)․Note 1. Definition of Driving Voltage( Vlcd) :Illumination (D65)System․Note 4. Definition of Contrast ratio( CR) :Brightness of Non-selected Segment (B2)Brightness of Selected Segment (B1)CR =V,maxCR,maxDriving VoltageB r i gh t n e s s (%)Brightness Curve forSelected Segment0%=90 =270Viewing Direction 6 O’clock DirectionNormal :9. RELIABILITY9.1. MTBFThe LCD module shall be designed to meet a minimum MTBF value of 50000 hours with normal. (25°C in the room without sunlight)9.2. TESTSNO. ITEM CONDITION CRITERION1 High Temperature Operating 60 120Hrs2 Low Temperature Operating -10 120Hrs3High Temperature/Humidity Non-Operating60 ,90%RH ,120 Hrs4 High TemperatureNon-Operating70 120Hrs5 Low TemperatureNon-Operating-20 120Hrs6 Temperature CyclingNon-Operating-10 (30Min )↔ 60 (30Min)10 CYCLESNo Defect OfOperational Function InRoom Temperature AreAllowable.IDD of LCM inPre-and post-test shouldfollow specificationNotes: Judgments should be mode after exposure in room temperature for two hours.10. PRECAUTIONS FOR USING LCD MODULES10.1. HANDLING PRECAUTIONS(1) The display panel is made of glass. Do not subject it to a mechanical shock or impact by droppingit.(2) If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any inyour mouth. If the substance contacts your skin or clothes, wash it off using soap and water.(3) Do not apply excessive force to the display surface or the adjoining areas since this may cause thecolor tone to vary.(4) The polarizer covering the display surface of the LCD module is soft and easily scratched. Handlethis polarizer carefully.(5) If the display surface becomes contaminated, breathe on the surface and gently wipe it with a softdry cloth. If it is heavily contaminated, moisten a cloth with one of the following solvents: - Isopropyl alcohol- Ethyl alcohol(6) Solvents other than those above mentioned may damage the polarizer.Especially, do not use the following:- Water- Ketone- Aromatic solvents(7) Extra care to minimize corrosion of the electrode. Water droplets, moisture condensation or acurrent flow in a high-humidity environment accelerates corrosion of the electrode.(8) Install the LCD Module by using the mounting holes. When mounting the LCD Module, makesure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/Ocable or the backlight cable.(9) Do not attempt to disassemble or process the LCD Module.(10) NC terminal should be open. Do not connect anything.(11) If the logic circuit power is off, do not apply the input signals.(12) To prevent destruction of the elements by static electricity, be careful to maintain an optimumwork environment.- Be sure to ground the body when handling he LCD Module.- Tools required for assembling, such as soldering irons, must be properly grounded.-To reduce the amount of static electricity generated, do not conduct assembling and other workunder dry conditions.-The LCD Module is coated with a film to protect the display surface. Exercise care when peeling off this protective film since static electricity may be generated.10.2. STORAGE CONDITIONSWhen storing, avoid the LCD module to be exposed to direct sunlight of fluorescent lamps. For stability, to keep it away form high temperature and high humidity environment (The best condition is : 23±5°C, 45±20%RH). ESD protection is necessary for long-term storage also.10.3. OTHERSLiquid crystals solidify under low temperature (below the storage temperature range) leading to defective orientation or the generation of air bubbles (black or white). Air bubbles may also be generated if the module is subject to a low temperature.If the LCD Module have been operating for a long time showing the same display patterns the display patterns may remain on the screen as ghost images and a slight contrast irregularity may also appear.A normal operating status can be recovered by suspending use for some time. It should be noted that this phenomenon does not adversely affect performance reliability.To minimize the performance degradation of the LCD Module resulting from destruction caused by static electricity etc. exercise care to avoid holding the following sections when handling the modules.- Exposed area of the printed circuit board.- Terminal electrode sections.11. Using LCD modules11.1 LIQUID CRYSTAL DISPLAY MODULESLCD is composed of glass and polarizer. Pay attention to the following items when handling.(1) Please keep the temperature within specified range for use and storage. Polarization degradation,bubble generation or polarizer peel-off may occur with high temperature and high humidity.(2) Do not touch, push or rub the exposed polarizers with anything harder than a HB pencil lead (glass,tweezers, etc).(3) N-hexane is recommended for cleaning the adhesives used to attach front/rear polarizers andreflectors made of organic substances, which will be damaged by chemicals such as acetone, toluene, toluene, ethanol and isopropyl alcohol.(4) When the display surface becomes dusty, wipe gently with absorbent cotton or other soft materiallike chamois soaked in petroleum ether. Do not scrub hard to avoid damaging the display surface.(5) Wipe off saliva or water drops immediately, contact with water over a long period of time maycause deformation or color fading.(6) Avoid contacting oil and fats.(7) Condensation on the surface and contact with terminals due to cold will damage, stain orpolarizers. After products are tested at low temperature they must be warmed up in a container before coming is contacting with room temperature air.(8) Do not put or attach anything on the display area to avoid leaving marks on.(9) Do not touch the display with bare hands. This will stain the display area and degrade insulationbetween terminals (some cosmetics are determinate to the polarizers).(10)As glass is fragile, it tends to become or chipped during handling especially on the edges. Pleaseavoid dropping or jarring.11.2 INSTALLING LCD MODULEAttend to the following items when installing the LCM.(1) Cover the surface with a transparent protective plate to protect the polarizer and LC cell.(2) When assembling the LCM into other equipment, the spacer to the bit between the LCM and thefitting plate should have enough height to avoid causing stress to the module surface, refer to the individual specifications for measurements. The measurement tolerance should be ±0.1mm.11.3 ELECTRO-STATIC DISCHARGE CONTROLSince this module uses a CMOS LSI, the same careful attention should be paid for electrostatic discharge as for an ordinary CMOS IC.(1) Make certain that you are grounded when handing LCM.(2) Before removing LCM from its packing case or incorporating it into a set, be sure the module andyour body have the same electric potential.(3) When soldering the terminal of LCM, make certain the AC power source for the soldering irondoes not leak.(4) When using an electric screwdriver to attach LCM, the screwdriver should be of groundpotentiality to minimize as much as possible any transmission of electromagnetic waves produced sparks coming from the commutator of the motor.(5) As far as possible, make the electric potential of your work clothes and that of the workbenches tothe ground potential.(6) To reduce the generation of electro-static discharge, be careful that the air in the work is not toodried. A relative humidity of 50%-60% is recommended.11.4 PRECAUTIONS FOR OPERATION(1) Viewing angle varies with the change of liquid crystal driving voltage (Vo). Adjust Vo to showthe best contrast.(2) Driving the LCD in the voltage above the limit will shorten its lifetime.(3) Response time is greatly delayed at temperature below the operating temperature range. However,this does not mean the LCD will be out of the order. It will recover when it returns to the specified temperature range.(4) If the display area is pushed hard during operation, the display will become abnormal. However, itwill return to normal if it is turned off and then on.(5) Condensation on terminals can cause an electrochemical reaction disrupting the terminal circuit.Therefore, this product must be used and stored within the specified condition of 23±5°C, 45±20%RH.(6) When turning the power on, input each signal after the positive/negative voltage becomes stable.11.5 SAFETY(1) It is recommended to crush damaged or unnecessary LCDs into pieces and wash them off withsolvents such as acetone and ethanol, which should later be burned.(2) If any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash offthoroughly with soap and water.12. REVISION HISTORYrecord Date Version Reviseversion 05-01-011.0 Original2.0 Change specification format 05-11-193.0 Change contact mode 06-07-30SAMPLE APPROVED REPORT。

1MBI400S-120(IGBT管)

1MBI400S-120IGBT Module1200V / 400A 1 in one-packageFeatures· High speed switching · Voltage drive· Low inductance module structureApplications· Inverter for Motor drive· AC and DC Servo drive amplifier · Uninterruptible power supply· Industrial machines, such as Welding machinesMaximum ratings and characteristicsThermal resistance characteristicsThermal resistance ––0.04––0.12–0.0125 –IGBT FWD the base to cooling fin °C/W°C/W °C/W *4 : This is the value which is defined mounting on the additional cooling fin with thermal compoundItem Symbol Characteristics Conditions Unit Min. Typ. Max.Rth(j-c)Rth(j-c)Rth(c-f)*4Characteristics0123452004006008001000Collector current vs. Collector-Emiiter voltageTj= 25°C (typ.)C o l l e c t o r c u r r e n t : I c [ A ]Collector - Emitter voltage : VCE [ V ]0123452004006008001000Collector current vs. Collector-Emiiter voltageTj= 125°C (typ.)Collector - Emitter voltage : VCE [ V ]C o l l e c t o r c u r r e n t : I c [ A ]0123452004006008001000Collector current vs. Collector-Emiiter voltageVGE=15V (typ.)Collector - Emitter voltage : VCE [ V ]C o l l e c t o r c u r r e n t : I c [ A ]510152025246810Collector-Emiiter voltage vs. Gate-Emitter voltageTj= 25°C (typ.)C o l l e c t o r - E m i t t e r v o l t a g e : V C E [ V ]Gate - Emitter voltage : VGE [ V ]051015202530351000500010000100000Capacitance vs. Collector-Emiiter voltage (typ.)VGE=0V, f= 1MHz, Tj= 25°CC a p a c i t a n c e : C i e s , C o e s , C r e s [ p F]Collector - Emitter voltage : VCE [ V ]010002000300040002004006008001000Dynamic Gate charge (typ.)Vcc=600V, Ic=400A, Tj= 25°CGate charge : Qg [ nC ]C o l l e c t o r - E m i t t e r v o l t a g e : V C E [ V]0510152025G a t e - E m i t t e r v o l t a g e : V G E [ V ]0100200300400500600700501005001000Switching time vs. Collector current (typ.)Vcc=600V, VGE=+-15V, Rg= 1.8ohm, Tj= 25°CS w i t c h i n g t i m e : t o n , t r , t o f f , t f [ n s e c ]Collector current : Ic [ A ]0100200300400500600700501005001000Switching time vs. Collector current (typ.)Vcc=600V, VGE=+-15V, Rg= 1.8ohm, Tj= 125°CCollector current : Ic [ A ]S w i t c h i n g t i m e : t o n , t r , t o f f , t f [ n s e c ]0.5110505010050010005000Switching time vs. Gate resistance (typ.)Vcc=600V, Ic=400A, VGE=+-15V, Tj= 25°CGate resistance : Rg [ ohm ]S w i t c h i n g t i m e : t o n , t r , t o f f , t f [ n s e c ]020040060080020406080100Switching loss vs. Collector current (typ.)Vcc=600V, VGE=+-15V, Rg=1.8ohmS w i t c h i n g l o s s : E o n , E o f f , E r r [ m J /p u l s e ]Collector current : Ic [ A ]0.5110500100200300Switching loss vs. Gate resistance (typ.)Vcc=600V, Ic=400A, VGE=+-15V, Tj= 125°CS w i t c h i n g l o s s : E o n , E o f f , E r r [ m J /p u ls e ]Gate resistance : Rg [ ohm ]2004006008001000120014000100200300400500600700800900 Reverse bias safe operating area+VGE=15V, -VGE<=15V, Rg>=1.8ohm, Tj<=125°CCollector - Emitter voltage : VCE [ V ]C o l l e c t o r c u r r e n t : I c [ A ]Outline Drawings, mmmass : 380g200400600800Forward current vs. Forward on voltage (typ.)F o r w a r d c u r r e n t : I F [ A ]Reverse recovery characteristics (typ.)Vcc=600V, VGE=+-15V, Rg=1.8ohm1E-30.010.050.10.5T h e r m a l r e s i s t a n s e : R t h (j -c ) [ °C /W ]Pulse width : Pw [ sec ]。

Yamato Scientific BM Water Bath BM110 BM210 说明书

No ．AC5-9806-07-BMWATER BATHBM110 BM210First Edition● Thank you for your Yamato Scientific BM series Water Bath purchase.● For proper use of this unit, please read the instruction manual and warranty thoroughly beforeoperation. Keep both for any future references.Yamato ScientificRead and apprehend important warnings in thisinstruction manual prior to use.1. Specifications (1)2.Safety Information..........................................................................................................................2-5Safety Symbols (2)Safety Precautions…………………………………………………………………….3-4Hazardous Materials (5)3. Identification of Parts.....................................................................................................................6-9BM110 (6)BM210 (7)Sample : Combined with RE210 (8)Sample : Combined with RE510 (9)4. How to Operate (10)5. Maintenance (11)Daily maintenance/Weekly maintenance (11)Troubleshooting Guide (11)6. After Sale Service and Warranty (12)Request for Repair (12)7. Replacement Parts (13)8. Wiring Diagram (14)Model BM110 BM210Temp. range during operation Room temp. +5℃ ~ 95℃ *1Temp. setting range 0℃ ~ 100℃Accuracy of temp. adjustment *2 ±2℃ at 60℃Control system ON/OFF controlSet-up system Analog set-upDisplay system ThermometerOperation function Operation at fixed pointThermoregulator Liquid-operatedthermoregulatorMaterial SUS316 pipe heaterHeaterCapacity 500W 1kW Power switch Paddle switchPower lamp Lit when power is onOthers - Drain (with plug)Safety device Protection from overcurrent (fuse)Capacity 4 000L 7000 LTank Dimension Φ7.9×Depth 4.7 (inches)Φ20×Depth 12 (cm) Φ9.8×Depth 5.9 (inches) Φ25×Depth 15 (cm)External dimensions (W×D×H) *3 9.4×11.8×5.9 (inches)24×30×15 (cm) 12.2×14.2×9.1 (inches)31×36×23 (cm)Weight 7.7lb (3.5kg) 13.2lb (6kg) Required power source AC230V±10% 50Hz 2.3A AC230V±10% 50Hz 4.5A Liquid used WaterStandard accessories ● B ar Alcohol Thermometer(-10℃～110℃with immersion line) 1 ● F use 1 ● I nstruction manual 1 ● G uarantee 1*1 In case of unloaded operation of bath only. The maximum temperature varies on circumstances and operational conditions.*2 It shows the performance under rated power supply at the room temperature of 23℃±5℃ and with humidity of 65％±20％.*3 It does not include projection parts.Safety SymbolsSafety InformationThis instruction manual and our products apply various indications for safety. Ignoring these indications can cause such situations as listed below. Read and understand the following warning and caution signs in this manual prior to use.WARNING Indicates the possibility of serious or fatal injury (Note 1).CAUTION Indicates the possibility of injury (Note 2) or damage (Note 3) to theequipment.(Note 1) Serious injury : Bodily harm by electric shock, bone fracture or poisoning which may require hospitalization.(Note 2) Injury : Bodily harm by electric shock, bone fracture or poisoning which may not require hospitalization.(Note 3) Damage : Any damage on equipment, facility, structure, etc.Meaning of Graphic IndicationsSafety PrecautionsDo not use this unit for any purpose other than its intended use, described in this manual.Do not use this unit in flammable or explosive gas environments.This unit is not explosion proof. Never use this unit in flammable or explosive gas environments. Never fail to ground the unit.This unit uses a 3-conductor power cord (including ground wire). Be sure to ground the unit for safety.Do not use this unit if a malfunction occurs.If smoke or any strange odor should disburse from this unit, turn the power off immediately and pull out the main power cord. Then contact Yamato Scientific. Neglecting this procedure can result in fire or electric shock. Never try repairing the unit yourself.Do not bundle the power cord.Overheat or fire can occur if the power cord is bundled or if an object is on the cord.Do not damage the power cord.Forcible bending, pulling wrenching or extending the power cord can cause fire or electric shock.Do not use any explosive or flammable heat medium.Never use any explosive or flammable substances or such compounds as a heat medium which could cause an explosion or fire.Avoid water contact.To avoid electric leak or shock, avoid direct contact with water.Do not heat with low water.If you operate this unit with low water, fire can be caused by overheating.Do not disassemble or remodel the unitTo avoid fire or electric shock, never try disassemble this unit.Safety PrecautionsHazardous MaterialsHazardous material are listed below. Never use these materials as samples or heat media.Nitroglycol, Nitroglycerin, Nitrocellulose, and other explosive nitric esters.Trinitrobenzene, Trinitrotoluene, Picric acid, and other explosive nitro compounds.Peracetic acid, Methyl ethyl ketone peroxide, Benzoyl peroxide, and other organic peroxides.ExplosiveExplosive SubstanceSodium azide, and other metallic azidesCombustible SubstanceMetallic lithium, Metallic potassium, Metallic sodium, Yellow phosphorus, Phosphorus sulfide, Red phosphorus, Celluloid, Calcium carbide, Lime phosphate, Magnesium powder, Aluminum powder, and other combustible metal powders and sodium dithionite (hydrosulfite).Potassium chlorate, Sodium chlorate, Ammonium chlorate, and other chlorates.Potassium perchlorate, Sodium perchlorate, Ammonia perchlorate, and other perchlorates.Potassium peroxide, Sodium peroxide, Barium peroxide, and other inorganic peroxides.Potassium nitrate, Sodium nitrate, Ammonia nitrate, and other nitrates.Sodium chlorite and other chlorites.OxidantCalcium hypochlorite and other hypochlorites.Ethyl ether, Gasoline, Acetaldehyde, Propylene Oxide, Carbon disulfide, and other flammable substances with a flash point below minus 30ºC.Normal hexane, Ethylene oxide, Acetone, Benzene, Methyl ethyl ketone, and other flammable substances with a flash point between minus 30ºC and 0o C.Methanol, Ethanol, Xylene, Pentyl acetate (amyl acetate), and other flammable substance with a flash point between 0ºC and 30ºC.Ignitable SubstanceKerosene, Light oil, Turpentine oil, Isoamyl alcohol, Acetic acid, and other flammable substances with a flash point between 30ºC and 65ºCFlammableCombustibleGasHydrogen, Acetylene, Ethylene, Methane, Ethane, Propane, Butane and other flammable gas at 15℃ degree and under 1 atmosphere.BM110 BM110Power SwitchFuseThermometer HolderBM210 BM210Power SwitchDrain PlugFuseSample : Combined with RE210 Combination with RE210According to the position or space to set the bath and the body, the arm jack can be set in the front (drawing 1)or on the right side (drawing 2) as shown above.Sample : Combined with RE510 Combination with RE510How to operatePower Lamp1. Pour adequate water (3000ml for BM110, 5000ml for BM210) into the tank, and place athermometer in the holder. Use distilled water. Deionized water should not be used.2. Connect the unit securely to a power source with AC230V. Always use a grounded outlet. Set thetemperature dial to the desired temperature and turn on the power switch. The power lamp is lit when the power heater is on.3. The temperature scale shows an approximate figure. When the temperature rises close to the setpoint, read the thermometer to adjust the temperature. Since there are some differences from the set point the first time, check if the current temperature accords with the degree to operate.This unit does not have a stirring function and the tank temperature varies. We recommend you to use any stirrer (our Lab. Stirrer etc.,) together with this unit.Power FailureWhen power supply is restored after a power failure, the unit re-starts operation from previously set temperature.Daily maintenance/Weekly maintenanceMaintenanceDaily Maintenance:Turn power switch off and disconnect main power cord before attempting any maintenance.Once the water bath has cooled to room temperature you may empty the water.Wipe off any excess dirt on the interior and exterior with a damp cloth. Do not use benzene,thinner or cleanser.Weekly Maintenance:The pipe heater should be cleaned at least twice a month. Accumulation of scale build upresults in poor heat transfer and high sheath temperatures.When the unit is not in use for a long period of time.Be sure to disconnect main power and drain the water tank if the unit will not be used for along period of time.Troubleshooting Guide Situation MakeSureThe power lamp on the panel is not lit when the power switch is on. ● C heck main power cord is connected firmly.● C heck main input voltage.If you have any question, contact Yamato Scientific.Request for RepairWhen you request repairIf any troubles should occur, stop the operation immediately, turn the power off, pull the power cord out and contact Yamato Scientific’s Technical Service Department.Necessary information● M odel Number● D ate of Purchase● D istributor Name● I nformation on difficultiesWarranty● K eep your warranty card for future references. Check the name of the distributor, date of purchase and any other contents of warranty.● T he terms of warranty is two years limited commencing the date of purchase. Repair is made without charge according to the contents of warranty.● D econtamination Statement:We can not accept any products or parts returned to us for repair or credit that is contaminated with or has been exposed to potentially infectious agents or radioactive materials.If you need repair, please call Yamato Scientific for a return authorization number. No product willbe accepted without this number.Name of Parts Parts Number SpecificationΦ6.4×30 250V 4A (for BM110) Fuse 2-10-006-0002Φ6.4×30 250V 7A (for BM210)Fuse 2-10-006-0003BM110/210)(forThermometer 5-02-001-6016Drain Plug 7-32-001-6005 (for BM210)O Ring 4-21-002-6020 P12.5 Baiton (for BM210)Thermal Fuse 2-10-003-0010 (for BM110/210)BM110)Heater Element BM110-30260 (forBM210)Heater Element BM410-30070 (forPower Lamp 2-09-006-0049 (for BM110/210)BM110/210)Thermoregulator 1-03-002-0005 (forBM110BM210AC230VSymbolName of PartsSymbolName of PartsF Fuse S Service Outlet H Heater SW Power Switch TF Thermal Fuse TCS Thermoregulator。

BT-210中文资料

BT-210 Datas交易网
Amp’ed RF, Inc.
(phone) 408 213-9530 (fax) 408 213-9533
Driver Installation
Windows XP Installation Instructions:
APPLICATIONS UPPER LAYER STACK
EVENTS COMMANDS
ARM7 CPU
HCI LM BASEBAND RF HCI STACK
FLASH MEMORY
©2008 Amp’ed RF Inc 2 9/30/08
1722 Ringwood Ave, Suite 250, San Jose, CA 95131, USA
The CP2102 chip provides the functionality to use standard UART serial communications from your computer via the Universal Serial Bus, and interfaces directly to our Bluetooth module inside the BT-210 Bluetooth serial adapter.
元器件交易网
Amp’ed RF, Inc.
(phone) 408 213-9530 (fax) 408 213-9533
Product Specification
Features
Bluetooth Radio Fully embedded Bluetooth v2.0 Serial Profile Class 2 radio Built with our BT-21 bluetooth module Wireless data communications Integrated chip antenna 128-bit encryption security Range up to 30m LOS FCC & Bluetooth qualified ST Micro ARM7 microprocessor up to 50MHz Memory 256K bytes flash memory 64K bytes RAM memory Data Rate 2M bps maximum data rate Multipoint capability Serial Interface COM port, up to 480K baud USB v2.0 User Interface AT command set (abSerial)

MYG压敏电阻资料

230
300
360(324-396)
595
10
1200
600
32
23
0.25
140
MYG07K391
250
320
390(351-429)
650
10
1200
600
35
25
0.25
130
MYG07K431
275
350
430(387-473)
710
10
1200
600
40
27.5
0.25
115
MYG07K471
175
225
270(243-297)
455
10
1200
600
24
17
0.25
185
MYG07K301
190
250
300(270-330)
500
10
1200
600
26
18.5
0.25
165
MYG07K331
210
275
330(297-363)
550
10
1200
600
28
20
0.25
150
MYG07K361
36
2.5
250
125
2.0
1.0
0.02
3500
MYG07K220
14
18
22(20-24)
43
2.5
250
125
2.0
1.3
0.02
2800
MYG07K270
17
22
27(24-30)
53

Belimo B210 钢球阀数据表说明书

B210•ApplicationStainless Steel Ball and StemTechnical dataFunctional dataValve Size 0.5" [15]Fluidchilled or hot water, up to 60% glycol Fluid Temp Range (water)0...250°F [-18...120°C]Body Pressure Rating 600 psi Close-off pressure ∆ps 200 psiFlow characteristic equal percentage Servicing maintenance-free Flow Pattern 2-way Leakage rate0% for A – AB Controllable flow range 75°Cv1.2 Body pressure rating note 600 psiCv Flow RatingA-port: as stated in chart B-port: 70% of A – AB Cv MaterialsValve body Nickel-plated brass body Stem seal EPDM (lubricated)SeatPTFEPipe connection NPT female ends O-ring EPDM (lubricated)Ballstainless steel Suitable actuatorsNon-SpringTR LRB(X)NRSafety notesWARNING: This product can expose you to lead which is known to the State of California to cause cancer and reproductive harm. For more information go to Product featuresThis valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some other common applications include Unit Ventilators, VAV box re-heat coils and bypass loops. This valve is suitable for use in a hydronic system with variable flow.Flow/Mounting detailsB210 DimensionsDimensional drawingsLRB, LRXA B C D E F H1H29.4" [239] 2.4" [60] 5.2" [132] 4.6" [117] 1.3" [33] 1.3" [33] 1.2" [30] 1.1" [28]TRA B C D E F3.7" [95] 2.4" [60]4.8" [122] 4.2" [107] 1.3" [33] 1.3" [33]TFRB, TFRXA B C D E F6.6" [167] 2.4" [60] 4.9" [124] 4.3" [110] 1.5" [39] 1.5" [39]LFA B C D E F7.9" [200] 2.4" [60] 5.7" [146] 5.1" [129] 1.8" [46] 1.8" [46]ARB N4, ARX N4, NRB N4, NRX N4A B C D E F11.4" [289] 2.4" [60]7.7" [196]7.0" [179] 3.1" [80] 3.1" [80]A B C D E F7.9" [200] 2.4" [60] 5.7" [146] 5.1" [129] 1.8" [46] 1.8" [46]B210TFRB, TFRXA B C D E F6.6" [167] 2.4" [60] 4.9" [124] 4.3" [110] 1.5" [39] 1.5" [39]ARB N4, ARX N4, NRB N4, NRX N4A B C D E F11.4" [289] 2.4" [60]7.7" [196]7.0" [179] 3.1" [80] 3.1" [80]TR24-3-T US•••••On/Off Floating Point, Non-Spring Return, 24 VTechnical dataElectrical dataNominal voltageAC 24 V Nominal voltage frequency 50/60 Hz Power consumption in operation 1 WTransformer sizing 1 VA (class 2 power source)Electrical Connection Screw terminal (for 26 to 14 GA wire)Overload Protectionelectronic throughout full rotation Functional dataInput Impedance 0.36 kΩManual override push down handle Angle of rotation 90°Running Time (Motor)90 s / 90°Noise level, motor 35 dB(A)Position indicationMechanically, pluggable Safety dataDegree of protection IEC/EN IP40Degree of protection NEMA/UL NEMA 1 UL Enclosure Type 1Agency ListingcULus acc. to UL60730-1A/-2-14, CAN/CSAE60730-1:02, CE acc. to 2014/30/EU and 2014/35/EU; Listed to UL 2043 - suitable for use in air plenums per Section 300.22(c) of the NEC and Section 602.2 of the IMC Quality Standard ISO 9001Ambient temperature -22...122°F [-30...50°C]Storage temperature -40...176°F [-40...80°C]Ambient humidity max. 95% r.H., non-condensing Servicingmaintenance-free WeightWeight0.62 lb [0.28 kg]Safety notesNEMA 4X, 316L stainless steel enclosure.Battery Back Up System for SY(7~10)-110ZS-300 without brackets.NEMA 4X, 304 stainless steel enclosure.MFT95 resistor kit for 4 to 20 mA control applications.Electrical installationINSTALLATION NOTESProvide overload protection and disconnect as required.Actuators may also be powered by 24 VDC.Actuators are provided with a numbered screw terminal strip instead of a cable.TR24-3-T USActuators cannot be wired in parallel.Meets cULus requirements without the need of an electrical ground connection.Warning! Live Electrical Components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to workwith live electrical components. Have a qualified licensed electrician or other individual who has beenproperly trained in handling live electrical components perform these tasks. Failure to follow all electricalsafety precautions when exposed to live electrical components could result in death or serious injury.On/Off AC 24 V Transformer。

MYG压敏电阻

395
84
8000 6000
30
14K271 270 243-297 175 225
455
99
8000 6000
30
高
14K331 330 297-363 210 275
550
115
8000 6000
30
能
14K361 360 324-396 230 300
595
130
8000 6000
30
I
14K391 390 351-429 250 320
1025
92
4600
3500
10K681 680 612-748 420 560
1120
92
4600
3500
10K751 750 675-825 460 615
1240
100
4600
3500
10K821 820 738-902 510 670
1355
110
4600
3500
浙江黄岩航洋电子有限公司 TEL:86-0576-84179098 FAX:86-0576-84173885 Email:hangyang@
300
15.6
2300
1750
通
07K201 200 185-225 130 170
340
17.5
2300
1750
型
07K221 220 198-242 140 180
360
19
2300
1750
07K241 240 216-264 150 200
395
21
2300
1750
07K271 270 243-297 175 225

SML-210中文资料

The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.

BAB210中文资料

SPECIFICATIONS
Input Voltage 24VDC, 48VDC or 72VDC ± 20%. For other inputs consult factory. Input Protection Thermal Fuse Inrush current limiting Reverse polarity protection by crossbar diode. Input Isolation 500VDC input to chassis 500 VDC input to output 500VDC output to chassis Full compliance to IEC950, CSA 22-2-950 and UL 1950. Please contact factory for approval status for the requested input/output configuration. Efficiency Min 80% at full load Output Voltages 5..5.2V/12A; +12..15V/3A & -12..15V/3A standard 120W with convection, Max 150W with forced air cooling Consult factory for other voltages Line/Load & Cross Regulation + /-1% combined for all outputs Output Overvoltage Protection Double regulator loop on main output, clamps on auxiliary outputs Overload Protection Current limiting with short circuit protection Self-resetting thermostat for thermal protection EMI Meets requirements for FCC Class B and EN55022 Class B conducted emissions Output Ripple/Noise Better than 1% of output voltage peak to peak or 0.2% RMS of the output voltage (20Hz BW) Operating Temperature 0 to +50oC Temperature Drift 0.03% per oC over operating temperature range Dimensions Plug-in: 3Ux 220mm x 8HP (1.6”) Stand-alone: 4.42” x 10.0” x 2.25” Connections: Plug-in module: H15 Connector Stand-alone: screw-type terminal block Warranty Twelve months subject to application within good engineering practice

B402中文资料

VOLTAGE RANGE 200 to 400 Volts B302 THRU B304CURRENT40.0 AmperesTECHNICAL SPECIFICATION ： FEATURES• Low Leakage• Low forward voltage drop • High current capability• High forward surge current capacity •Glass passivated chipMECHANICAL DATA• Technology: vacuum soldered• Copper cup with transfer molded plastic • Polarity: B30-P lead-PB30-N lead-N• Lead: Plated Ni lead, solderable per MIL-STD-202E method 208C • Mounting: Press Fit•Weight: 0.094 ounces, 2.65 gramsMAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS• Ratings at 25℃ ambient temperature unless otherwise specified • Single Phase, half wave, 60HZ, resistive or inductive load •For capacitive load derate current by 20%SYMBOLS B402-P B402-N B403-P B403-N B404-P B404-N UNIT Maximum Repetitive Peak Reverse Voltage V RRM 200 300 400 Volts Maximum RMS Voltage V RMS 140 210 280 Volts Maximum DC Blocking VoltageV DC 200300 400Volts Maximum Average Forward Rectified Current, At Tc=105℃I O40AmpsPeak Forward Surge Current3.3mS single half sine wave superimposed on Rated load (JEDEC method) I FSM 500 Amps Rating for fusing (t ＜8.3ms)I 2t 1037 A 2S Maximum instantaneous Forward Voltage at 100A V F 1.10 Volts 5.0 Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage TA=100℃ I R 450 UA Typical Thermal ResistanceR θJC 1.0 ℃/W Operating and Storage Temperature RangeT J ,T STG(-65 to +175)℃Notes:1. Enough heatsink must be considered in application.VOLTAGE RANGE 200 to 400 Volts B402 THRU B404CURRENT40.0 AmperesRATINGS AND CHARACTERISTIC CURVES B402 THRU B404F1G.2 MAXIMUM NON-REPETITIVE PEAKFORWARD SURGE CURRENTF1G.1 TYPICAL FORWARD CURRENTDERATING GURVENUMBER OF CYCLES AT 60 Hz1006040201086421P E A K F O R W A R D S U R G E C UR R E N T ,(A )A V E R A G E F O R W A R D C U R R E N T ,(A )AMBIENT TEMPERATURE, ()℃125100150175755025020********F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICSI N S T A N T A N E O U S F O R W A R D C U R R E N T ,(A )INSTANTANEOUS FORWARD VOLTAGE,(V)1000101.00.1504030200604020A V E R A G E P O W E R D I S S I P A T I O N (W )AVERAGE FORWARD CURRENT, (A)F1G.4 FORWARD ROWER DISSIPATION1050。

MYG 压敏电阻型号及主要技术参数汇总

型号最大连续工作电压压敏电压最大限制电压通流容量(8/20u s最大能量(J额定功率电容量AC(V DC(V V0.1mA Vp(V lp(A 1次(A 2次(A 2ms (W 1KH Z (pFMYG-05D180K 11 14 18(16-20 40 1 100 50 0.5 0.01 1400 MYG-05D220K 14 18 22(20-24 48 1 100 50 0.7 0.01 1150 MYG-05D270K 17 22 27(24-30 60 1 100 50 0.8 0.01 930 MYG-05D330K 20 26 33(30-36 73 1 100 50 0.9 0.01 760 MYG-05D390K 25 31 39(35-43 86 1 100 50 1.1 0.01 640 MYG-05D470K 30 38 47(42-52 104 1 100 50 1.4 0.01 530 MYG-05D560K 35 45 56(50-62 123 1 100 50 1.7 0.01 450 MYG-05D680K 40 56 68(61-75 145 1 100 50 2.0 0.01 370 MYG-05D820K 50 65 82(74-90 150 5 400 200 2.5 0.10 300 MYG-05D101K 60 85 100(90-110 175 5 400 200 3.0 0.10 250 MYG-05D121K 75 100 120(108-132 210 5 400 200 3.6 0.10 210 MYG-05D151K 95 125150(135-165 260 5 400 200 4.5 0.10 165 MYG-05D181K 115 150 180(162-198 320 5 400 200 5.0 0.10 140 MYG-05D201K 130 170 200(185-225 355 5 400 200 6.0 0.10 125 MYG-05D221K 140 180 220(198-242 380 5 400 200 6.5 0.10 110 MYG-05D241K 150 200 240(216-264 415 5 400 200 7.5 0.10 100 MYG-05D271K 175 225 270(243-297 475 5 400 200 8.0 0.10 95 MYG-05D301K 190 250 300(270-330 520 5 400 200 8.5 0.10 85 MYG-05D331K 210 275 330(297-363 570 5 400 200 9.5 0.10 75 MYG-05D361K 230 300 360(324-396 620 5 400 200 11 0.10 70 MYG-05D391K 250 320 390(351-429 675 5 400 200 12 0.10 65 MYG-05D431K 275 350 430(387-473 745 5 400 200 13.5 0.10 60 MYG-05D471K 300 385 470(423-517 810 5 400 200 15 0.10 55 MYG-05D511K 320 415 510(459-561 845 5 400 200 15 0.10 50 MYG-05D561K 350 460 560(504-616 920 5 400 200 17 0.10 45 MYG-07D180K 11 14 18(16-20 36 2.5 250 125 1.0 0.02 3500 MYG-07D220K 14 18 22(20-24 43 2.5 250 125 1.3 0.02 2800 MYG-07D270K 17 22 27(24-30 53 2.5 250 125 1.6 0.02 1800 MYG-07D330K 20 26 33(30-36 65 2.5 250 125 1.9 0.02 1500 MYG-07D390K 25 31 39(35-43 77 2.5 250 125 2.3 0.02 1300 MYG-07D470K 30 38 47(42-52 93 2.5 250 125 2.8 0.02 1100 MYG-07D560K 35 45 56(50-62 110 2.5 250 125 3.3 0.02 890 MYG-07D680K 40 56 68(61-75 135 2.5 250 125 4.1 0.02 740 MYG-07D820K 50 65 82(74-90 135 10 1200 600 4.8 0.25 600 MYG-07D101K 60 85 100(90-110 165 10 1200 600 6.0 0.25 500 MYG-07D121K 75 100 120(108-132 200 10 1200600 7.3 0.25 420 MYG-07D151K 95 125 150(135-165 250 10 1200 600 9.0 0.25 220 MYG-07D181K 115 150 180(162-198 300 10 1200 600 11 0.25 280 MYG-07D201K 130 170 200(185-225 340 10 1200 600 12.5 0.25 250 MYG-07D221K 140 180 220(198-242 360 10 1200 600 13.5 0.25 230 MYG-07D241K 150 200 240(216-264 395 10 1200 600 15 0.25 210 MYG-07D271K 175 225 270(243-297 455 10 1200 600 17 0.25 185 MYG-07D301K 190 250 300(270-330 500 10 1200 600 18.5 0.25 165 MYG-07D331K 210 275 330(297-363 550 10 1200 600 20 0.25 150 MYG-07D361K 230 300 360(324-396 595 10 1200 600 23 0.25 140MYG-07D391K 250 320 390(351-429 650 10 1200 600 25 0.25 130 MYG-07D431K 275 350 430(387-473 710 10 1200 600 27.5 0.25 115 MYG-07D471K 300 385 470(423-517 775 10 1200 600 30 0.25 150 MYG-07D511K 320 415 510(459-561 845 10 1200 600 32 0.25 100 MYG-07D561K 350 460 560(504-616 920 10 1200 600 35 0.25 90 MYG-07D621K 385 505 620(558-682 1025 10 1200 600 38 0.25 80 MYG-07D681K 420 560 680(612-748 1120 10 1200 600 42 0.25 75 MYG-10D180K 11 14 18(16-20 36 5 500 250 1.5 0.05 7500 MYG-10D220K 14 18 22(20-24 43 5 500 250 2.0 0.05 6000 MYG-10D270K 17 22 27(24-30 53 5 500 250 2.5 0.05 4000 MYG-10D330K 20 2633(30-36 65 5 500 250 3.0 0.05 3000 MYG-10D390K 25 31 39(35-43 77 5 500 250 3.5 0.05 2600 MYG-10D470K 30 38 47(42-52 93 5 500 250 4.5 0.05 2200 MYG-10D560K 35 45 56(50-62 110 5 500 250 5.5 0.05 1800 MYG-10D680K 40 56 68(61-75 135 5 500 250 6.5 0.05 1300 MYG-10D820K 50 65 82(74-90 135 25 2500 1250 8.0 0.4 1800 MYG-10D101K 60 85 100(90-110 165 25 2500 1250 10 0.4 1400 MYG-10D121K 75 100 120(108-132 200 25 2500 1250 12 0.4 1100 MYG-10D151K 95 125 150(135-165 250 25 2500 1250 16 0.4 900 MYG-10D181K 115 150 180(162-198 300 25 2500 1250 18 0.4 750 MYG-10D201K 130 170 200(185-225 340 25 2500 1250 20 0.4 500 MYG-10D221K 140 180 220(198-242 360 25 2500 1250 23 0.4 450 MYG-10D241K 150 200 240(216-264 395 25 2500 1250 25 0.4 400 MYG-10D271K 175 225 270(243-297 455 25 2500 1250 30 0.4 350 MYG-10D301K 190 250 300(270-330 500 25 2500 1250 30 0.4 330 MYG-10D331K 210 275 330(297-363 550 25 2500 1250 30 0.4 300 MYG-10D361K 230 300 360(324-396 595 25 2500 1250 35 0.4 270 MYG-10D391K 250 320 390(324-396 650 25 2500 1250 40 0.4 250 MYG-10D431K 275 350 430(387-473 710 25 2500 1250 45 0.4 230 MYG-10D471K 300 385 470(423-517 775 25 2500 1250 45 0.4 210 MYG-10D511K 320 415 510(459-561 845 25 2500 1250 45 0.4 190 MYG-10D561K 350 460 560(504-616 925 25 2500 1250 45 0.4 130 MYG-10D621K 385 505 620(558-682 1025 25 2500 1250 45 0.4 130 MYG-10D681K 420 560 680(612-748 1120 25 2500 1250 45 0.4 150 MYG-10D751K 460 615 750(675-825 1240 25 2500 1250 50 0.4 120 MYG-10D781K 485 640 780(702-858 1290 25 2500 1250 50 0.4 120 MYG-10D821K 510 670 820(738-902 1355 25 2500 1250 55 0.4 110 MYG-10D911K 550 745 910(819-1001 1500 25 2500 1250 60 0.4 100 MYG-10D102K 625 825 1000(900-1100 1650 25 2500 1250 65 0.4 90 MYG-10D112K 680 895 1100(990-1210 1815 25 2500 1250 70 0.4 80 MYG-14D180K 11 14 18(16-20 36 10 1000 500 3.5 0.10 18000 MYG-14D220K 14 18 22(20-24 43 10 1000 500 4.0 0.10 15000 MYG-14D270K 17 22 27(24-30 53 10 1000 500 5.0 0.10 10000 MYG-14D330K 20 26 33(30-36 65 10 1000 500 6.0 0.10 7500 MYG-14D390K 25 31 39(35-43 77 10 1000 500 7.0 0.10 6500 MYG-14D470K 30 38 47(42-52 93 10 1000 500 8.5 0.10 5500 MYG-14D560K 35 45 56(50-62 110 10 1000 500 10 0.10 4500MYG-14D680K 40 56 68(61-75 135 10 1000 500 12 0.10 3300 MYG-14D820K 50 65 82(74-90 135 50 4500 2500 14 0.60 2900 MYG-14D101K 60 85 100(90-110 165 50 4500 2500 18 0.60 2400 MYG-14D121K 75 100 120(108-132 200 50 4500 2500 20 0.60 1900 MYG-14D151K 95 125 150(135-165 250 50 4500 2500 25 0.60 1500 MYG-14D181K 115 150 180(162-198 300 50 4500 2500 30 0.60 1300 MYG-14D201K 130 170 200(185-225 340 50 4500 2500 35 0.60 1000 MYG-14D221K 140 180 220(198-242 360 50 4500 2500 40 0.60 900 MYG-14D241K 150 200 240(216-264 395 50 4500 2500 40 0.60 830 MYG-14D271K 175 225 270(243-297 455 50 4500 2500 50 0.60 750 MYG-14D301K 190 250 300(270-330 500 50 4500 2500 55 0.60 670 MYG-14D331K 210 275 330(297-363 550 50 4500 2500 60 0.60 650 MYG-14D361K 230 300 360(324-396 595 50 4500 2500 65 0.60 550 MYG-14D391K 250 320 390(351-429 650 50 4500 2500 700.60 500 MYG-14D431K 275 350 430(387-473 710 50 4500 2500 75 0.60 450 MYG-14D471K 300 385 470(423-517 775 50 4500 2500 80 0.60 400 MYG-14D511K 320 415 510(459-561 845 50 4500 2500 80 0.60 350 MYG-14D561K 350 460 560(504-616 925 50 4500 2500 80 0.60 300 MYG-14D621K 385 505 620(558-682 1025 50 4500 2500 85 0.60 250 MYG-14D681K 420 560 680(612-748 1120 50 4500 2500 90 0.60 250 MYG-14D751K 460 615 750(675-825 1240 50 4500 2500 100 0.60 230 MYG-14D781K 485 640 780(702-858 1290 50 4500 2500 105 0.60 230 MYG-14D821K 510 670 820(738-902 1355 50 4500 2500 110 0.60 200 MYG-14D911K 550 745 910(819-1001 1500 50 4500 2500 120 0.60 180 MYG-14D102K 625 825 1000(900-1100 1650 50 4500 2500 130 0.60 150 MYG-14D112K 680 895 1100(990-1210 1815 50 4500 2500 140 0.60 150 MYG-20D180K 11 14 18(16-20 36 20 2000 1000 10 0.20 37000 MYG-20D220K 14 18 22(20-24 43 20 2000 1000 13 0.20 30000 MYG-20D270K 17 22 27(24-30 53 20 2000 1000 15 0.20 22000 MYG-20D330K 20 26 33(30-36 65 20 2000 1000 20 0.20 17000 MYG-20D390K 25 31 39(35-43 77 20 2000 1000 24 0.20 15000 MYG-20D470K 30 38 47(42-52 93 20 2000 1000 30 0.20 13000 MYG-20D560K 35 45 56(50-62 110 20 2000 1000 35 0.20 11000 MYG-20D680K 40 56 68(61-75 135 20 2000 1000 40 0.20 7000 MYG-20D820K 50 65 82(74-90 135 100 6500 4000 27 1.00 5500 MYG-20D101K 60 85 100(90-110 165 100 6500 4000 30 1.00 4800 MYG-20D121K 75 100 120(108-132 200 100 6500 4000 40 1.00 3800 MYG-20D151K 95 125 150(135-165 250 100 6500 4000 50 1.00 3000 MYG-20D181K 115 150 180(162-198 300 100 6500 4000 60 1.00 2500 MYG-20D201K 130 170 200(185-225 340 100 6500 4000 70 1.00 2000 MYG-20D221K 140 180 220(198-242 360 100 6500 4000 75 1.00 2000 MYG-20D241K 150 200240(216-264 395 100 6500 4000 80 1.00 1800 MYG-20D271K 175 220 270(243-297 455 100 6500 4000 90 1.00 1600 MYG-20D301K 190 250 300(270-330 500 100 6500 4000 105 1.00 1400 MYG-20D331K 210 275 330(297-363 550 100 6500 4000 120 1.00 1200 MYG-20D361K 230 300 360(324-396 595 100 6500 4000 130 1.00 1000 MYG-20D391K 250 320 390(351-429 650 100 6500 4000 140 1.00 900MYG-20D431K 275 350 430(387-473 710 100 6500 4000 150 1.00 900 MYG-20D471K 300 385 470(423-517 775 100 6500 4000 150 1.00 800 MYG-20D511K 320 415 510(459-561 845 100 6500 4000 150 1.00 700 MYG-20D561K 350 460 560(504-616 925 100 6500 4000 150 1.00 500 MYG-20D621K 385 505 620(558-682 1025 100 6500 4000 160 1.00 460 MYG-20D681K 420 560 680(612-748 1120 100 6500 4000 175 1.00 420 MYG-20D751K 460 615 750(675-825 1240 100 6500 4000 180 1.00 420 MYG-20D781K 480 640 780(702-858 1290 100 6500 4000 190 1.00 400 MYG-20D821K 510 670 820(738-902 1355 100 6500 4000 215 1.00 350 MYG-20D911K 550 745 910(819-1001 1500 100 6500 4000 230 1.00 320 MYG-20D102K 625 8251000(900-1100 1650 100 6500 4000 250 1.00 300 MYG-20D112K 680 895 1100(990-1210 1815 100 6500 4000 400 1.00 200。

赛米控丹佛斯 SEMIPACK 晶闸管二极管模块 SKKD 101 16 数据表

Rev. 3.0–31.05.20221®1SKKDRectifier Diode ModulesSKKD 101/16Features*•Heat transfer through aluminium oxide ceramic insulated metal baseplate •UL recognized, file no. E63532Typical Applications•Non-controllable rectifiers for AC/AC converters•Line rectifiers for transistorized AC motor controllers•Field supply for DC motorsAbsolute Maximum Ratings SymbolConditionsValuesUnitRecitifier DiodeI FAV sin. 180°T j max =130°C T c =85°C 134A T c =100°C 101A I FSM 10ms T j =25°C 2500A T j =130°C 2000A i 2t10ms T j =25°C 31250A²s T j =130°C20000A²s V RSM T j =25°C 1700V V RRM T j =25°C1600V T j -40...130°C Module T stg -40 (125)°C V isola.c.; 50 Hz; r.m.s.1min 3000V 1s3600VCharacteristics SymbolConditions min.typ.max.UnitDiode V F T j =25°C,I F =300A 1.45 1.60V V F0T j =130°C 0.750.87V r F T j =130°C 2.202.45m ΩI R T j =130°C, V RRM 3mA R th(j-c)cont.per chip 0.15K/W per module 0.075K/W R th(j-c)sin. 180°per chip 0.2K/W per module0.1K/WModule R th(c-s)chip 0.09K/W module 0.05K/W M s to heatsink M5 4.25 5.75Nm M t to terminals M52.553.45Nm a 5 * 9.81m/s²w75g2Rev. 3.0–31.05.2022© by SEMIKRON© by SEMIKRON Rev. 3.0–31.05.202234Rev. 3.0–31.05.2022© by SEMIKRONThis is an electrostatic discharge sensitive device (ESDS) due to international standard IEC 61340.*IMPORTANT INFORMATION AND WARNINGSThe specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respectiveapplication in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This documentsupersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.SKKD。

机械连接无缝阀门系列II 55-MY1B说明书

Instruction ManualMechanically Jointed Rodless CylinderII 2G Ex h IIC T6/T5 GbII2provided by compressed air into a force which causes mechanical linearsubject to “Special Conditions of Use”, please see Section 2.3.1 Safety InstructionsThese safety instructions are intended to prevent hazardous situationsand/or equipment damage. These instructions indicate the level ofpotential hazard with the labels of “Caution,” “Warning” or “Danger.”They are all important notes for safety and must be followed in additionto International Standards (ISO/IEC) *1), and other safety regulations.*1) ISO 4414: Pneumatic fluid power - General rules relating to systems.ISO 4413: Hydraulic fluid power - General rules relating to systems.IEC 60204-1: Safety of machinery - Electrical equipment of machines.(Part 1: General requirements)ISO 10218-1: Robots and robotic devices - Safety requirements forindustrial robots - Part 1: Robots.•Refer to product catalogue, Operation Manual and HandlingPrecautions for SMC Products for additional information.• Keep this manual in a safe place for future reference.Warning•Always ensure compliance with relevant safety laws andstandards.•All work must be carried out in a safe manner by a qualified person incompliance with applicable national regulations.2 SpecificationsThis product is suitable for use in Zones 1 and 2 only.2.1 Product Specifications:Refer to the operation manual for this product;2.2 Production Batch Code:The batch code printed on the label indicates the month and the year ofproduction as per the following table;2.3 Special Conditions of Use:•Products are suitable for sub-divisions IIC.•Products are suitable for Zones 1 & 2 only.2.3.1 Temperature Marking:2.3.1.1 Standard Product:•In the normal ambient temperature range (+5°C to +40°C) the productis rated to temperature class T6.•In the special ambient temperature range (+40°C to +60°C) the productis rated to temperature class T5.2.3.2 Static:•Danger of electrostatic discharge.3 Installation3.1 InstallationWarning•Do not install the product unless the safety instructions have been readand understood.•Do not twist or bend the cylinder, or mount the product when subjectto tension.•Do not use in an application where the product is stopped mid-stroke,via an external stop.•Do not use where cylinders are being synchronised to move a singleload.•In order to install the product, use one of the brackets available foundSee the product catalogue for the exact code to order which relates to thebore size of your product.•When replacing the side supports, use the hexagonal socket head capscrews of the following sizes, and the hexagon wrenches shown below.3.2 EnvironmentWarning•Do not use in an environment where corrosive gases, chemicals, saltwater or steam are present.•Do not use in an explosive atmosphere except within the specifiedrating.•Do not expose to direct sunlight. Use a suitable protective cover.•Do not install in a location subject to vibration or impact in excess ofthe product’s specifications.•Do not mount in a location exposed to radiant heat that would result intemperatures in excess of the product’s specifications.•Do not use in a place subject to heavy vibration and/or shock.•Do not use in wet environments, where water can remove the presenceof the lubrication.•Do not use in case of heavy dusty environments where dust canpenetrate into the cylinder and dry the grease.•Do not allow dust layers to build up on the cylinder surface and insulatethe product.3.3 PipingCaution•Before connecting piping make sure to clean up chips, cutting oil, dustetc.•When installing piping or fittings, ensure sealant material does notenter inside the port. When using seal tape, leave 1 thread exposedon the end of the pipe/fitting.•Tighten fittings to the specified tightening torque.3.4 LubricationCaution•SMC products have been lubricated for life at manufacture, and do notrequire lubrication in service.•If a lubricant is used in the system, refer to catalogue for details.use, and could relate to an increase in maximum surface temperatureabove what the product specification declares.3.6 Electrical Connection•The product should be grounded by the piston rod and the body inorder to create an electrically conductive path to thesystem/application.•Ground the product in accordance with applicable regulations.•Do not pass an electrical current through the product.4 Settings4.1 Air Cushion adjustment•For air-cushion adjustment, tighten or loosen the cushion valve usinga hexagon socket wrench or a flat head screwdriver (excluding ø10).Warning•Do not operate the cushion valve in the fully closed or fully openedstate.Using it in the fully closed state will cause the cushion seal to bedamaged. Using it in the fully opened state will cause the piston assemblyor the cover to be damaged.•Be certain to activate the air cushion at the stroke end.When the cylinder is used with the cushion valve in a fully open position,a suitable external device should be installed to absorb all of the kineticenergy of the mechanism, of which the actuator is part, before reachingeach end of stroke. If this is not done, the piston assembly will bedamaged.ORIGINAL INSTRUCTIONSRefer to product catalogue for ‘How to Order’.Refer to the standard product catalogue for general dimensions.7.1General maintenanceCaution• Not following proper maintenance procedures could cause the productto malfunction and lead to equipment damage.•If handled improperly, compressed air can be dangerous.• Maintenance of pneumatic systems should be performed only by qualified personnel.• Before performing maintenance, turn off the power supply and be sure to cut off the supply pressure. Confirm that the air is released to atmosphere.• After installation and maintenance, apply operating pressure and power to the equipment and perform appropriate functional and leakage tests to make sure the equipment is installed correctly.• If any electrical connections are disturbed during maintenance, ensure they are reconnected correctly and safety checks are carried out as required to ensure continued compliance with applicable national regulations.• Do not make any modification to the product.• Do not disassemble the product, unless required by installation or maintenance instructions.• Do not use a product which looks or contains damage, this will invalidate the certification. If damage is seen, please replace the product immediately.• Periodically check the product for any damage or rust appearing. This could result in an increase in friction and lead to dangerous conditions. Replace the whole actuator if any of these conditions appear.• Replace the product, when air leakage is above the allowable value 7.2 Replacement of Dust Seal Band Warning• The dust seal band is the only customer replaceable part.• If other parts are deemed to have failed please replace the product.7.3 Disassembly procedure• Disassemble the cylinder, remove the old grease and place all the parts on a clean cloth in a clean environment. The following flat head screwdriver or hexagon socket wrench shall be used to loosen the set• The following screwdriver or hexagon socket wrenches shall be used• Remove the old dust seal band, scrapers and if necessary, bearings and side scrapers.1 Dust seal band 3 Bearing2Scraper4Side scraper7.4 Lubrication procedureLubricate the parts using the following SMC grease packs: Product Grease pack number Weight (g)StandardGR-S-010 10GR-S-020 20Apply lubricant to:▪ Dust seal band inner and outer surface ▪ scrapers ▪ bearings▪ side scrapers ▪ tube top surface7.5 Assembly procedure• The cylinder is assembled in the following order: bearings, dust sealband, side scraper, parallel key, scraper, stopper, spacer and end cover. Tighten the cross recessed binding head screws or the hexagon socket button bolt according to the torque values given.•Finally tighten the two set screws at each side with tightening torque of 0.1 Nm.Check for cylinder smooth movement and for air leakage8 Limitations of Use8.1 Limited warranty and disclaimer/compliance requirements Refer to Handling Precautions for SMC Products.Caution8.2 Obligations of the end-user• Ensure the product is used within the specification outlined.• Ensure that the maintenance periods are suitable for the application. • Ensure any cleaning processes to remove dust layers are made with the atmosphere in mind (e.g. using a damp cloth to avoid static build up).• Ensure that the application does not introduce additional hazards by mounting, loading, impacts or other methods.• Ensure that there is sufficient ventilation and air circulation around the product.• If the product is subject to direct heat sources in the application, they should be shielded so that the actuator temperature stays within the stated operating range.Danger• Do not exceed any of the specifications listed in Section 2 of this document as this will be deemed improper use.• Air equipment has an air leakage during operation within certain limits. Do not use this equipment when the air itself introduces additional hazards and could lead to an explosion.• Use only Ex certified auto switches. These should be ordered separately.• Do not use this product in the presence of strong magnetic fields that could generate a surface temperature higher than the product specification.• Avoid applications where the piston rod end and the adjoining part in the application can create a possible ignition source.• Do not install or use these actuators where there is the possibility for the piston rod to impact foreign objects.• In the event of damage or failure of any parts located in the vicinity where this product has been installed, it is the responsibility of the user to determine whether or not this has compromised the safety and condition of this product and/or the application.• External impact on the cylinder body could result in a spark and/or cylinder damage. Avoid any application where foreign objects can hit or impact the cylinder. In such situations the application should install a suitable guard to prevent this occurrence.• Do not use this equipment where vibration could lead to failure.9 Product DisposalThis product shall not be disposed of as municipal waste. Check your local regulations and guidelines to dispose this product correctly, in order to reduce the impact on human health and the environment.Refer to or www.smc.eu for your local distributor/importer.URL : https:// (Global) https:// www.smc.eu (Europe) SMC Corporation, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JapanSpecifications are subject to change without prior notice from the manufacturer. © 2022 SMC Corporation All Rights Reserved. Template DKP50047-F-085M。

MBN 31010-2_2001.12_DE

Dezember 2001Mercedes-BenzFluidtechnikSchaltplänefür Kraftfahrzeuge und AnhängerfahrzeugeÖlhydraulik und PneumatikBenennungen und graphische SymboleMBN 31 010-2Ersatz fürAusgabe: 1989-05Fortsetzung Seite 2 bis 60Herausgeber:DaimlerChrysler AG 70546 StuttgartNormung (EP/QIN)Fachverantwortung (Name): GurtnerAbteilung: EP/QIN Werk:019Telefon : (0711) 17- 2 08 39HPC:D652Ordnungsnummer 31 500/2Vertraulich! Alle Rechte vorbehalten. Weitergabe oder Vervielfältigung ohne vorherige schriftliche Zustimmung der DaimlerChrysler AG verboten.0 Inhalt1Allgemeines....................................................................................................................................................21.1Zweck.............................................................................................................................................................21.2Anwendungsbereich.....................................................................................................................................21.3Normative Verweisungen.............................................................................................................................21.4Hinweise (22)Symbole..........................................................................................................................................................31Verdichter, Pumpen, Motoren..............................................................................................................32Druckregler.............................................................................................................................................53Frostschutzeinrichtungen....................................................................................................................64Schutzventile.........................................................................................................................................75Energiespeicher.....................................................................................................................................86Wasserabscheider, Trockner...............................................................................................................97Überströmventile.................................................................................................................................118Rückschlag- und Absperrventile .......................................................................................................129Leuchtmelder.......................................................................................................................................1310Druckschalter, elektrisch....................................................................................................................1411Druckmesser........................................................................................................................................1512Signalgeber..........................................................................................................................................1613Betriebsbremsventile für Fremdkraftbremse ...................................................................................1714Feststellbremsventile..........................................................................................................................1915Bremsventile, belüftet mechanisch betätigt.....................................................................................2016Relaisventile.........................................................................................................................................2117Anhängersteuerventile für Einleitungsbremse.................................................................................2218Anhängersteuerventile für Zweileitungsbremse..............................................................................2319Einfachwirkende Zylinder (Hydraulik)...............................................................................................2520Einfachwirkende Zylinder (Pneumatik).............................................................................................2621Doppelt wirkende Zylinder (pneu./hydr.)...........................................................................................2722Kombizylinder (Pneumatik)................................................................................................................2823Bremsgeräte für Fremdkraftbremse..................................................................................................2924Druckverhältnisventile ohne Steueranschluß..................................................................................3025Druckregelventile mit Steueranschluß und variabler Kennlinie.....................................................3126Bremskraftregler automatisch ...........................................................................................................3227Bremsverstärker für Hilfskraftbremse...............................................................................................3328Sperrventile..........................................................................................................................................3429Druckminderventile.............................................................................................................................3530Druckbegrenzungsventile...................................................................................................................3631Regeleinrichtungen; elektr./elektr.-pneum./elektr.-hydraul.............................................................3732Wegeventile mit 3- Schaltstellungen.................................................................................................4033Wegeventile mit 2-Schaltstellungen..................................................................................................4134Behälter (Hydraulik)............................................................................................................................4435Kupplungsköpfe..................................................................................................................................4536Filter......................................................................................................................................................4637Drosselventile......................................................................................................................................4738Druckanschlußstellen.........................................................................................................................4839Entlüftungsstellen...............................................................................................................................4940Drosselrückschlagventile...................................................................................................................5041Wegeventile mit 3 Schaltstellungen.. (51)Seite 2MBN 31 010 - 2 : Dezember 200142Wegeventile mit 4 Schaltstellungen (52)43Luftfederbälge (53)44Feststellbremsventile (54)45Wegeventile mit 2 Schaltstellungen (55)46Gestänge (56)47Wegeventile mit 5 und mehr Schaltstellungen (57)48Verstärker (58)49Proportional Ventile (59)50Medientrenner (60)3Änderungen (60)1Allgemeines1.1 ZweckIn dieser Norm sind alle graphischen Symbole festgelegt, die in Funktionsschemen und in sonstigen Unterlagen bei Anlagen der Ölhydraulik und Pneumatik für Kraftfahrzeuge und Anhängefahrzeuge, z.B. bei Bremsanlagen, verwendet werden.1.2 AnwendungsbereichDiese Norm gilt für alle Schaltpläne der Ölhydraulik und Pneumatik, die in Mercedes-Benz-Fahrzeugen Verwendung finden.Verweisungen1.3 NormativeDIN ISO 1219-11996-03Graphische Symbole und Schaltpläne, Teil 1 graphischeSymbole (Deutsche Übersetzung der ISO 1219-1: 1991).DIN ISO 1219-21996-11Graphische Symbole und Schaltpläne Teil 2 Schaltpläne(Deutsche Übersetzung der ISO 1219-2: 1995).DIN EN 60617-81997-08Graphische Symbole für Schaltpläne Teil 8, Schaltzeichenfür Meß-, Melde- und Signaleinrichtungen.(DeutscheÜbersetzung der IEC 60617-8: 1996)DIN ISO 67861988-10Straßenfahrzeuge – Druckluftbremsanlagen; Kennzeichnungvon Anschlüssen an Geräten. (Deutsche Übersetzung derISO 6786: 1980)DIN 70024-31990-07Begriffe für Einzelteile von Kraftfahrzeugen und derenAnhängefahrzeugen; Bremsausrüstung.DIN 742531994-01Bremsausrüstung für Kraftfahrzeuge und AnhängefahrzeugeGraphische Symbole für Bremsschaltpläne.1.4 HinweiseAnalog zu dieser Norm kennzeichnet jedes Symbol ein Gerät bzw. eine Baugruppe, jedoch nicht seine Bauart. Die Symbole sind in "Nullstellung"1)) dargestellt. Die Symbole gelten sowohl für Hydraulik als auch für Pneumatik, sofern nicht ausdrücklich die Anwendung eingeschränkt wird.Im einzelnen sind diese Symbole festgelegt durch-Übernahme aus DIN ISO 1219 und DIN EN 60617-Kombination von einem oder mehreren Grundsymbolen mit Funktionssymbolen nach DIN ISO 1219 und DIN EN 60617 (wobei bei den einzelnen Geräten die Darstellung auf die Hauptfunktion begrenztwurde; die Art der Betätigung ist im Regelfall nicht Bestandteil des Symbols.)-Festlegung von neuen Symbolen (in Ausnahmefällen).-Darstellung einer einheitlichen Entlüftung nach DIN ISO 1219, Abschnitt 6.2.2.1.-Übernahme der Benennungen der Geräte, soweit zutreffend, aus DIN 70024-3-die den einzelnen Symbolen zugeordnete Nummer (1. Spalte). Sie wird für die Kennzeichnung der Geräte, z.B. im Funktionsschema, verwendet. Fehlende Nummern bzw. leere Gruppen werden vonSymbolen belegt, welche zur Zeit nicht mehr verwendet werden.1) Als Nullstellung wird bei Ventilen mit vorhandener Rückstellung, z.B. Feder, die Schaltstellung bezeichnet, die von den beweglichen Teilen des Ventils eingenommen wird, wenn das Ventil nicht angeschlossen ist. Die Definition der Nullstellung entspricht der Angabe "in unbetätigtem Zustand“ nach DIN 1219.Seite 3MBN 31 010 -2 : Dezember 2001 2SymboleSeite 4MBN 31 010 - 2 : Dezember 2001Seite 5MBN 31 010 -2 : Dezember 2001 Nr.Benennung Anwendung oder Ersatzder Ausrüstung oderErklärung des SymbolsSymbol/Symbole2Druckregler Nach DIN ISO 1219:Druckventilwerden zur Zeit nicht verwendetSeite 6MBN 31 010 - 2 : Dezember 2001Nr.Benennung Anwendung oder Ersatzder Ausrüstung oderErklärung des SymbolsSymbol/Symbole3Frostschutz-einrichtungenNach DIN ISO 1219werden zur Zeit nicht verwendetSeite 7 MBN 31 010 -2 : Dezember 2001Seite 8MBN 31 010 - 2 : Dezember 2001Seite 9 MBN 31 010 -2 : Dezember 2001Seite 10MBN 31 010 - 2 : Dezember 2001Erklärung des Symbols15Bremsventile, belüftetmechanisch betätigtnach DIN 1219(Druckventile)werden zur Zeit nicht verwendetErklärung des Symbols21Doppelt wirkendeZylinder (pneu./hydr.)nach DIN ISO 1219werden zur Zeit nicht verwendetErklärung des Symbols23Bremsgeräte fürFremdkraftbremsenach DIN 70024-3werden zur Zeit nicht verwendetErklärung des Symbols29Druckminderventile werden zur Zeit nicht verwendetErklärung des Symbols37Drosselventile Frei ab Nr. 37.04werden zur Zeit nicht verwendet。

全自动牛仔装袋机 Automatic High speed denim pocket setter

全自动牛仔装袋机Automatic High speed denim pocket setter（MB1002F-Br-311HN）电控系统使用说明书Instruction manual for electric control system常州智谷机电科技有限公司CHANGZHOU WISDOM&VALLEY ELECTRICAL TECHNOLOGY CO.,LTD在使用本设备之前请先阅读本零件手册Please read the operation manual of the touchscreen interface before using the device请将本零件手册放在便于查阅的地方保管Please keep this operation manual of touch screen interface in convenient place for referen2022.08版本信息/Version感谢购买IMB工业用缝纫机。

在使用此机器之前，请仔细阅读以下的说明，这样可以更好地帮到您了解此机器的相关操作。

这些说明是根据现行的条例明确阐述了正确的工作方法。

Thank you for purchasing this industrial sewing machine from IMBBefore using this automatic unit,please read the following instructions,which will help you tounderstand how the machine operates.These instructions illustrate the correct working methods to comply with current regulations.在没有得到IMB授权许可的前提下，此说明书的任何部分是不可以被复制或者转录的。

MMBT5401-2L

PNP Epitaxial Silicon TransistorAbsolute Maximum Ratings* T a =25°C unless otherwise noted* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.Notes:1.These ratings are based on a maximum junction temperature of 150 degrees C.2.These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.Electrical Characteristics T a =25°C unless otherwise noted* Pulse Test: Pulse Width ≤ 300µs, Duty Cycle ≤ 2.0%Symbol ParameterValue Units V CEO Collector-Emitter Voltage -150V V CBO Collector-Base Voltage -160V V EBO Emitter-Base Voltage -5.0V I C Collector Current- Continuous-600mA T J , T STGOperating and Storage Junction Temperature Range-55 ~ 150°CSymbolParameterTest ConditionMin.Max.Units Off Characteristics BV CEO Collector-Emitter Breakdown Voltage *I C = -1.0mA, I B = 0-150V BV CBO Collector-Base Breakdown Voltage I C = -100µA, I E = 0-160V BV EBO Emitter-Base Breakdown Voltage I E = -10µA, I C = 0-5.0V I CBO Collector Cutoff Current V CB = -120V, I E = 0V CB = -120V, I E = 0, T a = 100°C -50-50nA µA I EBO Emitter Cutoff Current V EB = -3.0V, I C =0-50nAOn Characteristics *h FEDC Current GainI C = -1.0mA, V CE = -5.0V I C = -10mA, V CE = -5.0V I C = -50mA, V CE = -5.0V 506050240V CE (sat)Collector-Emitter Saturation Voltage I C = -10mA, I B = -1.0mA I C = -50mA, I B = -5.0mA -0.2-0.5V V V BE (sat)Base-Emitter Saturation VoltageI C = -10mA, I B = -1.0mA I C = -50mA, I B = -5.0mA -1.0-1.0V V Small Signal Characterics f T Current Gain Bandwidth Product I C = -10mA, V CE = -10V, f = 100MHz100300MHz C ob Output Capacitance V CB = -10V, I E = 0, f = 1MHz6.0pF N FNoise FigureI C = -250µA, V CE = -5.0V, R S = 1.0K Ωf = 10Hz to 15.7KHz8.0dBMMBT5401PNP General Purpose Amplifier•This device is designed as a general purpose amplifier and switch for applications requiring high voltage.SOT-23B ECMark: 2LMMBT5401TRADEMARKSThe following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of TermsDatasheet Identification Product Status DefinitionAdvance InformationFormative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.PreliminaryFirst ProductionThis datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.No Identification Needed Full ProductionThis datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.Obsolete Not In ProductionThis datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.FAST ®FASTr™FPS™FRFET™GlobalOptoisolator™GTO™HiSeC™I 2C™i-Lo ™ImpliedDisconnect™ISOPLANAR™LittleFET™MICROCOUPLER™MicroFET™MicroPak™MICROWIRE™MSX™MSXPro™OCX™OCXPro™OPTOLOGIC ®OPTOPLANAR™PACMAN™POP™Power247™PowerSaver™PowerTrench ®QFET ®QS™QT Optoelectronics™Quiet Series™RapidConfigure™RapidConnect™µSerDes™SILENT SWITCHER ®SMART START™SPM™Stealth™SuperFET™SuperSOT™-3SuperSOT™-6SuperSOT™-8SyncFET™TinyLogic ®TINYOPTO™TruTranslation™UHC™UltraFET ®VCX™A CEx™ActiveArray™Bottomless™CoolFET™CROSSVOLT ™DOME™EcoSPARK™E 2CMOS™EnSigna™FACT™FACT Quiet Series™Across the board. Around the world.™The Power Franchise ®Programmable Active Droop™。

AIMB-210_startup_manual_ed.1

Before you begin installing your card, please make sure that the following items have been shipped:AIMB-210 Intel® Atom™ processor N270 Mini-ITX MotherboardIDE HDD cable (40 pin) x 1SA T A HDD cable x 2SA T A Power cable x 2Serial port cable x 3I/O port bracket x 1Startup manual x 1Driver CD x 1Warranty card x1Optional CableParallel cable with bracket (P/N: 1700008809)Dual port USB cable(P/N: 1700002204)(27 cm) with bracketIf any of these items are missing or damaged, please con-tact your distributor or sales representative immediately. Note: Acrobat Reader is required to view any PDF file.Acrobat Reader can be downloaded at:/Prodindex/acrobat/readstep.html(Acrobat is a trademark of Adobe).1.2.3.4.5.6.7.8.9.1.2.AIMB-210 (Intel® Atom™ processor N270 1.6 GHz FSB 533 MHz Mini ITX Motherboard with VGA, LVDS, TV-Out, 6 COM, Dual GbE, 8 USB, 2 SATA II)Startup ManualStandard SBC functionsCPU: Intel® Atom™ processor N270 1.6 GHz FSB 533 MHzBIOS: Award 16 Mbit SPIChipset: Intel 945GSE with ICH7MSystem Memory: Up to 2 GB; 200-pin SODIMM x 1, Singel-channel 400/533 MHz DDR2SATA2 Interface: Two onboard Serial AT A connectors and data transfers up to 150 MB/sIDE Interface: One onboard IDE connector supporting up to two enhanced IDE devices. Supports PIO mode 4 (16.67 MB/s data transfer rate) and ATA 33/66/100 (33/66/100 MB/s data transfer rate) BIOS enabled/dis-abledCF interface: Supports compact flash Type IISerial ports: Six serial ports, COM1, COM3, COM4, COM5 and COM6 are RS-232; COM2 is RS-232/422/485Parallel port: One parallel port, supports SPP/EPP/ECP mode (with pin header)Keyboard/mouse connector: Supports one standard PS/2 keyboard, one standard PS/2 mouse Watchdog timer: 1~255 level timer intervalsUSB 2.0: Supports up to eight USB 2.0 ports, four exter-nal ports and four onboard pin headers GPIO: 16-bit general purpose Input/OutputGraphic InterfaceController: Chipset integrated VGA controllerDisplay memory: Dynamically shared system memory up to 224 MBCRT: Up to 2048x1536 at 75 Hz maximum resolution, 400MHz RAMDACLVDS interface: Supports up to UXGA (1600X1200)LVDS port: Supports dual LVDS connectors.- LVDS1: single channel 18-bit/dual channel 36-bit- LVDS2 (Option) : single channel 24-bit/dual channel 48-bitEthernet InterfaceDual 10/100/1000Base-T GbE LAN Realtek RTL8111CMechanical and EnvironmentalDimensions (L x W): 170 x 170 mmPower supply voltage: 3.3 V , +5 V , 12 V , +5 Vsb, -12 V Power requirements: +5 V @ 1.96 A, +3.3 V @ 1.21 A, +12 V @ 0.19 A, 5 VSB @ 0.28, -12 V@ 0.06 A. Mea-sure of the maximum current values with system under maximum load••••••••••••••••••••••For more information on this and other Advantech products, please visit our website at:/eplatformFor technical support and service, please visit our support website at:/supportThis manual is for the AIMB-210 series Rev.A1.Part No. 2006021010Print in T aiwan1st Edition,Feb. 2009Operating temperature: 0 ~ 60° C Weight: 0.365 kg (weight of board)The board has a number of connectors and jumpers that help to configure the system to suit your application require-ments. The tables below list the function of each of theconnectors and jumpers.••11*Power button pin is located in Pin 1 & 2 of front panel connector.The device complies with the requirements in Part 15 of the FCC rules. Operation is subject to the following two conditons:This device may not cause harmful interference;This device must accept any interference received, including interference that may cause undesired opera-tion.1.2.* Default1-2 locsed 2-3 closed AT Mode A TX Mode 1-2 locsed 2-3 closed * DefaultInstallation NoteJFP1JFP2JFP3RS-422 ConfigurationRS-485 ConfigurationLVDS1 LVDS2Declaration of ConformityFPAUD1KBMS1COM12COM4LPT1JSETCOM2COM5COM6TVOUT1LAN2USB34LAN1USB12VGA1COM3Audio1DIMM A1CPUFAN1JWDT1SYSFAN1SATA1SATA2JPSON1CMOS1PCI1CF EATXPWR1IDE1INV2USB78USB56JLV1LVDS2JLV2LVDS1INV1DIO1SPI_CN1JFP1JFP2JFP3HDDLEDPWR_LED & KEY L OCKPWR-SW RESETSPEAKER12342468135712345The CD disc contains a driver installer program that will lead you through the installation os various device drivers needed to take full advantage of your motherboard.The computer is supplied with a battery-powered Real-time Clock circuit. There is a danger of explosion if the battery is incorrectly replaced. Replace only wih same or equivalent type recommended by the manufaturer. Discard used bat-teries according to manufaturer’s instructions.。