L610_BSM_v1cn
华三路由器软件升级指南
Mediatek_Wireless_Roadmap-2013-12-27
Confidential BMediaTek Roadmap UpdateDecember/27/2013Copyright © MediaTek Inc. All rights reserved.Confidential BAgenda▪ WiFi Market Update ▪ WiFi Networking Roadmap ▪ Beyond WiFiCopyright © MediaTek Inc. All rights reserved.2013/12/27-2-Confidential BWiFi Market UpdateCopyright © MediaTek Inc. All rights reserved.Smart Phone Say Hello to 802.11acConfidential BHTC New OneSamsung S4Sony Xperia Z Ultra C6802MediaTek13’Feb13’Mar13’Jun14’Q1Copyright © MediaTek Inc. All rights reserved.2013/12/27-4-11n vs. 11ac Transition100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 2013 2014 20152013/12/27 5Confidential BN300 takes entry level positionAC750/AC1200 replace N600 and get growth momentumAC-4SS (DBC) AC-3SS (DBC) AC-2SS (DBC) AC-2SS (FE, DBC) AC-1SS (DBC) 3SS (DBC) 2SS (DBC) 3SS 2SS 1SS20162017Copyright © MediaTek Inc. All rights reserved.Source: ABI, In-Stat, Mediatek IntelligenceMarket Dynamic▪ Router SKU Transition– – – – – –Confidential BN300 replaced N150 as 11n entry level router 11ac DBC router replaced 11n DBC router (AC1200 $79) LTE Smart Phone drive 11ac and NFC demand Normal power router + repeater to extend coverage Router 2.0 - Internet router (public cloud) + home router (personal cloud) Deep Packet Inspection (DPI) becomes mandatory function in mid-/high-end router▪ Next Generation Hotspot (Passpoint R2) moves Wi-Fi to the heart of the carrier network ▪ Home Security & Automation– – – – – Cloud & App, +touch panel for control Surveillance: WiFi Cloud IPC Security: BT Door Lock Home Automation: +Zigbee/Sub-1G for sensor network Healthcare: +BTLE2013/12/27 -6-Copyright © MediaTek Inc. All rights reserved.Confidential BWiFi Networking RoadmapCopyright © MediaTek Inc. All rights reserved.Confidential BAgenda▪ Chip Roadmap ▪ MT7620 Highlights ▪ MT7620 11ac Solutions ▪ MT7621 11ac Solutions ▪ MT7612 11ac SolutionsCopyright © MediaTek Inc. All rights reserved.2013/12/27-8-11n Router RoadmapN600(GbE) N750(GbE) N900(GbE)RT6856 RT3593 RT3593 MT7530 • MIPS34KEc (700 MHz) • DDRI/DDRII, NAND/SPI • FE SW, 802.3az • USB2.0 (2), rGMII, PCIe (2) • IPSec Engine (140Mbps) • AES256-CBC • Storage AcceleratorCPUMPConfidential BMT7620ART3593 MT7530MT7620ART5592 MT7530• MT7530 GbE SW • 5p+2 rGMII • 802.3az EEE • Jumbo FrameN600MT7620ART5592MT7620AMT7530N300MT7620AMT7620N• • • • • • • • • •2x2 802.11n (300 Mbps) MIPS24KEc (580/600 MHz) SDR/DDRI/DDRII, NAND/SPI/SD-XC/eMMC FE SW, 802.3az USB, rGMII(2), PCIe 2Gbps HWNAT (IPv6) Storage Accelerator Lowest Power Consumption Best IOT w/ Intel6300 eCos IPv6 logo ready turnkey (2/8)MT762x• • • • • • • • • •2x2 802.11n (300 Mbps) MIPS24KEc (580 MHz) DDRI/DDRII, SPI/SD-XC/eMMC FE SW, 802.3az USB, PCIe AES128/256-CBC Calibration Free 5V/0.6A power adapter DRAM embedded ULC rBOM, PCBN300GMPQ1’14Q2’14Q3’14Q4’14Q1’15Q2’1511ac Router Roadmap• MIPS1004K dual-core (880MHz) • 256KB L2 • DDRII/DDRIII, NAND/SPI/SD-XC • GbE SW, 802.3az EEE • USB 3.0, USB 2.0, rGMII, PCIe (3) • IPSec Engine (> 400Mbps) • HWNAT(IPv6)+BW Control • Storage Accelerator • NFC: MT6605 • SATAIII(2): 3rd PCIeCPUMPConfidential BAC1750(GbE)MT7621AMT7605E MT7615EAC1200(GbE)MT7621AMT7612E MT7602EMT7602E • LDPC, Beamforming • 256QAMMT7621AMT7612E MT7603EAC1200MT7603E • ULC • MCC • Airtime Fairness • 802.11v, 802.11j • Samples: Q1 2014• 4x4/4SS, 11ac stage2 • LDPC, Beamforming, MU-MIMO • 802.11v, 802.11j • CPU offload • Samples: Q4 2014MT7620AMT7612E• iPA • LDPC, Beamforming • Calibration FreeAC750MT7620AMT7610E• BeamformeeMPQ1’14Q2’14Q3’14Q4’14Q1’15Q2’15Dongle RoadmapAC1300CPUMPConfidential BAC866MT7612U • USB 3.0 • LDPC, Beamforming • Calibration Free, iPAMT7662U • USB 3.0 • BT 4.0+HS, LDPC, Beamforming • Calibration Free, iPA • Linux, Android MT7650U • USB 2.0 • BT 4.0+HS • Beamformee • Linux, AndroidAC433MT7610U • USB 2.0 • BeamformeeN450RT3573N300RT5572 RT5372 • USB 2.0 • Calibration Free, SoftAP mode • QFN40-5x5 (Smallest) MT7670U • USB 2.0 • High Power MT7603U • USB 2.0 • Calibration Free • ULCN150MT7601U RT3070MPQ1’14Q2’14Q3’14Q4’14Q1’15Q2’15PCIe Roadmap>AC1300CPUMPConfidential BMT7615E • 4x4/4SS, 11ac stage2 • LDPC, Beamforming, MU-MIMOAC866MT7612E • LDPC, Beamforming • Calibration Free, iPAAC433MT7610E • BeamformeeN450RT3593 • Calibration Free • LDPC, Beamforming • 256QAM • Calibration Free • 802.11j, 802.11v • 64QAMN300RT5592/EP RT5392MT7602E • USB 2.0 • Calibration Free, SoftAP mode • QFN40-5x5 (Smallest)MT7603EN150MT7601U RT3070MPQ1’14Q2’14Q3’14Q4’14Q1’15Q2’15MT7621 VPN Performance (>400Mbps)Confidential BVPN TunnelLAN:10.10.10.254Encrypti on DES 3DES AES-128 AES-192 AES-256 3DES AES-128 AES-192 AES-256 Authentication SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 SHA-1 MD5 DH Group DH2 DH2 DH2 DH2 DH2 DH2 DH2 DH2 DH2 DH2 DH5 DH5 DH5 DH5 DH5 DH5 DH5 DH5NetScreen第一次 第二次 第三次503.963 415.579 450.942 552.657 597.048 546.626 507.185 588.509 422.110 380.032 457.272 455.986 444.925 332.600 448.310 422.465 423.996 505.989 507.322 504.105 421.491 549.283 399.405 395.676 382.091 510.567 398.124 381.551 540.925 508.904 360.313 562.598 420.892 473.680 420.030 472.003 510.725 476.088 517.963 512.740 380.029 502.125 454.674 420.783 557.360 478.124 421.747 552.370TCPTCPTCP平均449.617 465.0827 459.4313 509.5883 509.7547 523.999 474.851 498.975 394.7433 464.2413 436.69 419.44 514.4033 439.876 410.1233 512.4777Copyright © MediaTek Inc. All rights reserved.2013/12/27- 13 -MediaTek Technology RoadmapConfidential B20152014 {BBP} 1. BW 5/10 2. Airtime Fairness {MAC} 1. MCC 2. WiFi Positioning {SoC} KGD2013 {RF} DPD, 11ac iPA {BBP} LDPC, TxBF {MAC} STA-Proxy {SoC} HNAT+HQoS, VPN, Storage AcceleratorCopyright © MediaTek Inc. All rights reserved.{RF} 1. DPA 2. 4x4/4ss, 3. 11ac stage2 {BBP} 1. Smart Antenna v3 2. MU-MIMO2013/12/27- 14 -Software RoadmapReadyOpenWRT trunkOpenWRT (MT7620, 3.x)Confidential B2013 Q1 Q2 Q3 Q4 Q12014 Q2 Q3 Q42015 Q1 Q2●● OpenWRT(MT7620, 2.6.36)(RT5350, 3.x)● OpenWRT● OpenWRT(MT7621, 3.x)Linux SDK● SDK 4.1(MT7620, 2.6.36)● SDK 4.2(MT7621, 2.6.36)● SDK 5.0(Kernel 3.x)eCos OpenBSD● MT7620N/ ● MT7620NMT5350 SDK 2.4.1.4 (2/8M)● AC750 SDK2.4.3.0 (2/16M)● AC750 SDK2.4.5.0 (2/8M)eCos –IPv6 FreeBSD● MT7620N ● AC750 SDK3.0.3.0 (2/8M) - 15 2013/12/27IPv6 SDK 3.0.1.0 (2/16M)IPv6 SDK 3.0.2.0 (2/8M)● AC1200 SDK3.0.4.0 (2/8M)Copyright © MediaTek Inc. All rights reserved.Confidential BSDK 4.2 vs. 4.1 ComparisonSDK 4.1Kernel Chip 2.6.21 2.6.36 (RT6856, MT7620) RT3050, RT3052 RT3883, RT3662 RT3352, RT5350 RT6856, MT7620 GCC 3.4.2SDK 4.22.6.21 2.6.36 (RT6856, MT7620, MT7621) RT3050, RT3052 RT3883, RT3662 RT3352, RT5350 RT6856, MT7620 MT7621 GCC 4.6.3 (MT7621 default) (MT7620 option) uClibc 0.9.33.2 (MT7621 default) (MT7620 option) Fast path (MT7620, MT7621) Fast path (MT7620, MT7621) lighthttpd web server (BSD license) Linux 2.6.36 support 2.6.38 MT7620+MT7530 RT3883+MT7530 WM8960 YES (MT7621) 400Mbps (MT7621) YES xHCI (MT7621) Win8- 16 -DescriptionGccUser LibraryuClibc 0.9.28PPTP L2TP HTTP Server Layer7 QoS Openswan Gigabit Switch Audio DAC HQoS VPN SPDIF USB Windows certificationn/a n/a Go-ahead Linux 2.6.21 only 2.6.22 RT3883+Vitesse WM8750 n/a 150Mbps (RT6856) n/a EHCI (RT6856/MT7620) Vista/Win7MT720 performance gain ~120% MT7620 performance gain ~100% /QDMACopyright © MediaTek Inc. All rights reserved.2013/12/27Value Added SoftwareDPI +iQoS DPI +iQoS (Broadweb) CAPWAP user kernel driverConfidential BSamba, Airplay, Airprint, DLNA DMSVPN NTFS (Paragon) (MediaTek)NTFS (Paragon)Remote USBUSB Printer Audio StorageIPv6 HNAT HQoS (MediaTek)Storage Accelerator (MediaTek)VoW (MediaTek)Mesh (TerraNet)IP cam H.264 (AIT/Sonix) Audio DAC (WM8960)Copyright © MediaTek Inc. All rights reserved.2013/12/27- 17 -Confidential BAgendaChip Roadmap ▪ MT7620 Highlights ▪ MT7620 11ac Solutions ▪ MT7621 11ac Solutions ▪ MT7612 11ac SolutionsCopyright © MediaTek Inc. All rights reserved.2013/12/27- 18 -Confidential BMT7620A Functional Block3.3V 20/40MHz Crystal PMU 2.5/1.0V Clock/Timer/Reset/PLL DRAM Controller NAND/SD-XC/eMMC SPI RF FEM RF FEM MAC BBP UART Full+ UART Lite USB 2.0 Host/Device CTRL/PHY I2C PPE w/ IPv6 I2S PCM 2 3 4 External Interface TransformerSDRAM(512Mbits) DDR1(1Gbits) DDR2(2Gbits) NAND Flash(8Gbits) SPI Flash/Codec UART Interface USB 2.0 Interface EEPROM/Control Audio Interface Codec GPIO/LEDMIPS 24KEc (580/600 MHz) 64K I-Cache 32K D-Cache5G WiFi 2x2 11n: RT5592 2x2 11n: RT5592EP (HP) 3x3 11n: RT3593 1x1 11ac: MT7610ERGMIIPCIe Storage Accelerator Ethernet SwitchRGMII01Copyright © MediaTek Inc. All rights reserved.2013/12/27- 19 -MT7620 Highlights• Best DBC TP w/ Intel 6300 • Best TP w/ mutiSTAs • No. 1 HNAT in smallnetbuilder • First IPv6 HNATConfidential BBest DBC Throughput w/ Intel63002Gbps IPv6 HNATMT7620Lowest Power Consumption• Lowest power consumption • Thermal PK w/ E900USB 2.0 Samba Performance• Perform same performance w/ EA3500 and E4200v2Copyright © MediaTek Inc. All rights reserved.2013/12/27- 20 -HNAT (Chariot) Benchmarkipv6 HNATConfidential B2Gbps HNATOutperform in iPv6 benchmarkCopyright © MediaTek Inc. All rights reserved.2013/12/27- 21 -Confidential BPower Consumption BenchmarkD-LINK DIR-605L RTL8196C+ RTL8192CE 2.31 2.64 1.42 1.38 1.37MT7620NSDRTenda W308R BCM5357TP-LINK TL-WR841N AR9341Uplink Downlink STA associated STA unassociated Radio off1.80 2.18 1.03 0.83 0.613.42 4.41 2.88 2.79 2.072.632 3.290 2.444 2.350 2.068Copyright © MediaTek Inc. All rights reserved.2013/12/27- 22 -Confidential BDBC TP Benchmark (vs. Intel6300)Copyright © MediaTek Inc. All rights reserved.2013/12/27- 23 -Peak Throughput Benchmark APto1STA or APto2STAsConfidential BCopyright © MediaTek Inc. All rights reserved.2013/12/27- 24 -N300/600, AC750/1200(GbE) Solution▪ MT7620A (580MHz)– – – – – 2x2 11n 2.4GHz GbE LAN(4)+WAN USB 2.0, SD-XC, I2S DDR2, SPI Flash PCIe: 802.11 a/n/acMT7620AConfidential B1x1/2x2 11ac▪ MT7530– 5p GbE SwitchMT7530▪ 4L PCB, double sides▪ OS– Linux SDKCopyright © MediaTek Inc. All rights reserved.2013/12/27- 25 -Outdoor AP Solution (Industry Spec.)▪ MT7620A (580MHz)– – – – – 2x2 11n 2.4GHz GbE(2) USB 2.0, PoE DDR1, NAND Flash PCIe• •Confidential BrGMII iNIC802.11 a/n/ac 802.11ac iNICMT7620A– rGMIIPCIe 1x1/2x2 11ac▪ HW Spec.– 4L PCB, double sides – -40~85 degrees (Industry Spec.) – Tx PowerMCS0: 26.8dbm per chain • Over temperature: +- 1dbm•PoE▪ OS– Linux SDKCopyright © MediaTek Inc. All rights reserved. 2013/12/27 - 26 -Confidential BAgendaChip Roadmap MT7620 Highlights ▪ MT7620 11ac Solutions ▪ MT7621 11ac Solutions ▪ MT7612 11ac SolutionsCopyright © MediaTek Inc. All rights reserved.2013/12/27- 27 -AC750 Products▪ Chip: MT7620A+7610EConfidential B▪ MT7620A HNAT, DPD, STA-Proxy, USB performance outperform among all 2x2 11n SoC ▪ eCos IPv6 turnkey for small memory footprint ▪ Shipping AC750 modelsD-Link (DIR-810)Copyright © MediaTek Inc. All rights reserved.IO-Data (WN-AC733GR)2013/12/27 - 28 -PCI (MZK-750DHP)AC750 Solution▪ MT7620A (580MHz)– – – – 2x2 11n 2.4GHz FE LAN(4)+WAN USB 2.0, SD-XC, I2S DDR2, SPI FlashMT7620AConfidential BMT7610E▪ MT7610E– 1x1 11ac (ePA)▪ 4L PCB, double sides▪ Power Consumption– 3.13w (power optimized) – 3.96w (rBOM optimized)▪ OS– Linux SDK – eCos turnkey (2/16)Copyright © MediaTek Inc. All rights reserved. 2013/12/27 - 29 -AC750 vs. HTC New One TP140 120 100 80 60 40 20 0 UplinkCopyright © MediaTek Inc. All rights reserved.Confidential BMbps119.288.890.311ac TPDnlink2013/12/27 - 30 -Bi-directionAC1200(FE) Solution▪ Chip: MT7620A+7612EConfidential B▪ HNAT, DPD, STA-Proxy, USB performance outperform among all 2x2 11n SoC ▪ enable 11ac iPA w/ industry lowest rBOM ▪ support ePA for better coverage ▪ eCos IPv6 turnkey for small memory footprintCopyright © MediaTek Inc. All rights reserved.2013/12/27- 31 -AC1200 Solution▪ MT7620A (580MHz)– – – – 2x2 11n 2.4GHz FE LAN(4)+WAN USB 2.0, SD-XC, I2S DDR2, SPI FlashConfidential BMT7612E▪ MT7612E– 2x2 11ac (iPA/ePA)MT7620A▪ 4L PCB, double sides ▪ Power Consumption– 3.13w (power optimized) – 3.96w (rBOM optimized)▪ OS– Linux SDKCopyright © MediaTek Inc. All rights reserved.2013/12/27- 32 -Confidential BAC1200 iPA Benchmark▪ Tx Power BenchmarkTX output (dBm) MT7612EBelkin AC1000 RTL8197D+ RTL8192ER+ RTL8812AR5GRF HW OFDM HT20 HT40 VHT20 VHT40 VHT80 6M 54M MCS0 MCS7 MCS0 MCS7 MCS0 MCS8 MCS0 MCS9 MCS0 MCS92x2 ac iPA 19 16.5 19 15.5 18.5 15.5 19 15 18.5 15 17.5 152x2 ac ePA 16 14DIR-860 AC1200 (BCM) 2x2 ac ePA 18 16 18 16 18 161218 14Copyright © MediaTek Inc. All rights reserved.2013/12/27- 33 -*TX Pout is single chain data at antenna port which includes 1.5dB loss (transmission line+diplexer+IPEX connector)Confidential BAgendaChip Roadmap MT7620 Highlights MT7620 11ac Solutions ▪ MT7621 11ac Solutions ▪ MT7612 11ac SolutionsCopyright © MediaTek Inc. All rights reserved.2013/12/27- 34 -Confidential BMT7621A Function Block20/25/40MHz Crystal DRAM Controller Clock/Timer/Reset/PLL NAND/SD-XC/eMMC SPI (2)DDR2(2Gbits, 1066) DDR3(4Gbits, 1200) NAND Flash(8Gbits) SPI Flash/Codec UART Interface USB 3.0 Interface USB 2.0 Interface SATA SATAIII (2) Audio Interface NFC MT6605 GPIO/LED11n WiFiPCIeMIPS 1004KEc (880 MHz) 32K I-Cache 32K D-Cache L2-Cache 256KB Storage AcceleratorMIPS 1004KEc (880 MHz) 32K I-Cache 32K D-Cache Cache Coherency Port HNAT+ BW CTRLUART Lite (3) USB 3.0 Host11ac WiFiPCIeUSB 2.0 Host PCIe I2S, PCM, S/PDIFCryptoGigabit SwitchRGMII01234I2C External InterfaceTransformerCopyright © MediaTek Inc. All rights reserved.2013/12/27- 35 -MT7621 ApplicationConfidential BEthernet USB dongle SPDIFeMMC SDXC USB/SATAUSBUSB (printer)Airplay WiFi MT7662 BT Sink play I2C MT6605 PCM (VoIP)I2S I2SSPITouch panelCopyright © MediaTek Inc. All rights reserved. 2013/12/27 - 36 -MT7621N/AMT7621A Package GbE Power Consumption PCB Heat Sink Application TFBGA 11.7x13.6 GbE(5)+rGMII 2.4W 2/4L Yes AC1200G-Router MT7621N TFBGA 11.7x13.6 rGMII 1.2W 2/4L NoConfidential BAC1200-Repeater NAS+GbE(1) AC1200-FE Internet RouterCopyright © MediaTek Inc. All rights reserved.2013/12/27- 37 -Confidential BMT7621 Introduction▪ Platform based network processor for 2x2/3x3 11ac, LTE cat4/5 with rich extensions– Rich I/O sets: 5p GbE switch, rGMII, PCIe(3), USB3, USB2, SD-XC, I2S, PCM, S/PDIF▪ HNAT+BW CTRL can work seamlessly– HNAT w/ 2Gbps wired speed IPv6 routing – HW bandwidth control to replace software scheduler▪ Upgradable L7 QoS database for “Auto QoS” ▪ Storage accelerator – GSO/GRO, fast DMA for write offload ▪ >400 Mbps VPN crypto engine ▪ NFC for WPS replacement ▪ Industry lowest power consumption ▪ World’s first 2x2 11ac iPA to save rBOM ▪ World’s first 2x2 11ac DBC 2L design to save rBOMCopyright © MediaTek Inc. All rights reserved. 2013/12/27 - 38 -AC1200AC1200 -GbE 4L RFB▪ 4L, double side ▪ DDR3 1200/NAND Flash ▪ On board dual band concurrent WIFI– 7612E: 2x2 11ac iPA/iLNA – 7602E: 2x2 11n iPA/iLNAGbE 5p GbEConfidential BU3U2 MT6605 (NFC)IC+ GbE PhyNAND Flash MT7621 A DDR3 (1200)▪ Co-crystal design ▪ External high power module– 7612E: 2x2 11ac – 7602E: 2x2 11n (256QAM) – 7603E: 2x2 11n (64QAM)SD-XCSATA3.0ASM1061 MT7602E (2.4GHz) MT7612E (11ac) S/PDIF▪ USB 3.0/2.0/SATA3.0Copyright © MediaTek Inc. All rights reserved. 2013/12/27 - 39 -*Note: PCB cost estimation by vendor “Newheart”AC1200AC1200 -GbE 2L RFB▪ PCB cost down 40%– Dimension: 168mm x 115mm x 1.6mm – Single side – FR4 PCB: 100pcs estimation – 4Layer:NTD 175 – 2Layer: NTD 105*U 2Confidential B5p GbESD-XC DDR2 (1066)▪ DDR2 800/1066, SPI flash ▪ Co-crystal design ▪ On board dual band concurrent WIFI– 7612E: 2x2 11ac iPA/iLNA – 7602E: 2x2 11ac iPA/iLNAMT7602E (2.4GHz)MT7621ASPI FlashMT7612E (11ac)▪ USB 2.0 HS host supportCopyright © MediaTek Inc. All rights reserved. 2013/12/27 - 40 -MT7621A HDK V31*Note: PCB cost estimation by vendor “Newheart”Benchmark with Dlink DIRDIR-860LBetter computing power Integrated RF front-endConfidential BBenchmark Chip Set AC1200-GbE MT7621A+ MT7612E+MT7602E iPA/iLNA Dual Core 880MHz TX:iPA performance better than competitor ePADlink DIR-860L BCM47081A0+ BCM4352+BCM43217 ePA/eLNA Single Core 800MHz Front-end module:RFMD RFFM4501CPU WIFI 5GMTK AC1200-GbERX:Low rate worst than competitor eLNA 0.5dB High rate better than competitorBetter RF performanceWIFI 2.4GTX:iPA performance better than competitor iPATX:iPARX: Dlink DIR-860L Excellent power consumption Lower thermal risk Cost advantage Power Consumption Thermal r-BOMiLNA better than competitor iLNARX: iLNAUplink: 7.21W Downlink: 7.45W Less heat sink, thermal pad and shielding case USD: 3.8638 Co-clock supportUplink: 9.03W Downlink: 10.98W More thermal strategy USD: 6.5361 w/ RF front-end USD: 5.3967 w/o RF front-endNote: rBOM cost is not including thermal strategy, and shielding case Copyright © MediaTek Inc. All rights reserved. 2013/12/27 - 41 -Benchmark with Netgear R6200v2Confidential BBenchmark Chip Set AC1200-GbE MT7621A+ MT7612E+MT7602E ePA/eLNA Dual Core 880MHz TX:ePA: SKYWORKS SKY85402-11Netgear R6200v2 BCM47081A0+ BCM4352+BCM43217 ePA/eLNA Single Core 800MHz Front-end module:RFMD RFFM4501Better computing power Better RF performance MTK AC1200-GbECPU WIFI 5GRX:eLNASKYWORKS SKY85601-11Better RF performanceWIFI 2.4GFront-end module:RFMD RFFM4203TX:ePA: SKYWORKS SE2528RX: Netgear R6200-V2 Power Consumption Lower thermal risk Cost advantage Thermal r-BOM Less heat sink, thermal pad and shielding case USD:3.8638* Co-clock support USD: 3.9684*eLNA: Richwave RTC6602Uplink: 9.55W Downlink: 12.48W*Note: rBOM cost is not including external RF front-end, thermal strategy, and shielding case Copyright © MediaTek Inc. All rights reserved. 2013/12/27 - 42 -Media Security Gateway (MT7621+STB+ZigBee)Confidential B11n WiFiDDR3 NAND11ac WiFiUSB 2.0 USB 3.0STB SoC (Slave )ASM 1060ZigBeeMT7621 (Host)PCIeHDDSLICUART rGMII Transformer (1000Mps)R J 1 1R J 1 1R J 4 5R J 4 5R J 4 5R J 4 5MocaCopyright © MediaTek Inc. All rights reserved.2013/12/27- 43 -MT762xA + 2.8”(240x320 Dots) TFT +Touch Panel (Resistive (Resistive) )Confidential BCopyright © MediaTek Inc. All rights reserved.2013/12/27- 44 -What’s QoS?▪ End to End ▪ Big Pipe to Small Pie ▪ QoS Components1 Classifier 2 Queue/BW Mgmt 3 Scheduler/ShaperConfidential BCopyright © MediaTek Inc. All rights reserved.2013/12/27- 45 -HWHW-BWBW-CTRL - UpstreamConfidential B1 2 3 4 3 2 1Copyright © MediaTek Inc. All rights reserved.2013/12/27- 46 -HWHW-BWBW-CTRL - DnstreamConfidential B1 2 3 4 3 2 1Copyright © MediaTek Inc. All rights reserved.2013/12/27- 47 -HWHW-BWBW-CTRL – Dnstream (2)1Confidential B2Copyright © MediaTek Inc. All rights reserved.2013/12/27- 48 -USB 3.0 Samba BenchmarkConfidential BAP Linksys EA6400 Buffalo AC1750 D-Link DIR-860L MT7621AFormatHDD Model NameRead (MByte/sec) 13.75Write (MByte/sec) 11.67 15.77test tool InterfaceFAT32Buffalo HD-LB131.45 37.93 72.30IOMETER USB3.0 16.55 29.50Copyright © MediaTek Inc. All rights reserved.2013/12/27- 49 -Confidential BAgendaChip Roadmap MT7620 Highlights MT7620 11ac Solutions MT7621 11ac Solutions ▪ MT7612 11ac SolutionsCopyright © MediaTek Inc. All rights reserved.2013/12/27- 50 -。
CN1610集群网络开关迁移指南说明书
Migrating to a two-node switched cluster with CN1610cluster switchesIf you have an existing two-node switchless cluster environment that uses cluster network switches,you can migrate to a two-node switched cluster environment using CN1610cluster network switches.The procedure you use depends on whether you have two dedicated cluster-network ports on each controller (as required on most systems)or a single cluster port on each controller(a supported option on N3150,N3220,and N3240storage systems).About this taskThere are two migration options available:v Migrating from a switchless cluster to a switched CN1610cluster environmentv Migrating from a switchless cluster(systems with a single cluster-network connection)Migrating from a switchless cluster to a switched CN1610cluster environmentIf you have an existing two-node switchless cluster environment,you can migrate to a two-node switched-cluster environment using CN1610cluster network switches.Before you beginTwo-node switchless configuration:v The two-node switchless configuration must be properly set up and functioning.v The nodes must be running Data ONTAP8.2or later.v All cluster ports must be in the up state.v All cluster LIFs must have be in the up state and on their home ports.CN1610cluster switch configuration:v The CN1610cluster switch infrastructure be redundant and fully functional on both switches.Refer to the IBM N series support website to ensure you have the latest RCF and FASTPATH versions on your switches.v Management network connectivity on both switches.v Console access to the cluster switches.v Necessary cabling for the node-to-switch and switch-to-switch connections has been completed.Twinax or fiber is supported for the CN1610switch.For more information on cabling,see Installation and Setup Instructions of your storage system and Clustered Data ONTAP Switch Setup and Configuration Guide.v Inter-Switch Link(ISL)cables are connected to ports13through16on both CN1610switches.v Initial customization of both CN1610switches has been completed.About this taskThis procedure migrates nodes in a two-node switchless environment into a two-node switched environment.The examples in this procedure use the following switch and node nomenclature:v cs1and cs2are the CN1610switches.v clus1and clus2are the cluster logical interfaces(LIFs).v The names of the Vservers are node1and node2.v The cluster::*>prompt indicates the name of the cluster.v The cluster ports used in this procedure as an example are e1a and e2a.Refer to the Installation and Setup Instructions of your storage system for the supported cluster ports.Procedure1.Disable all node-facing ports on both new cluster switches cs1and cs2.Do not disable the ISL ports.e the show port channel command to verify that the ISL and the physical ports on the ISLbetween the two CN1610cluster switches cs1and cs2are up.Results for the cs2switch:2e the show isdp neighbors command to display the list of neighboring devices.e the run*cdpd show-neighbors to ensure that each cluster port is connected to thecorresponding port on its partner cluster node.This example verifies that cluster ports e1a and e2a are connected to the same port on its cluster partner node:3e the network interface show-role cluster to ensure that all cluster LIFs are up ande the network interface modify command and set the auto revert parameter to false on clus1e the network interface migrate command on the console of each node to migrate clus1to port8.Shut down cluster port e1a on both nodes with the network port modify command.Verify the portstatus with the network port show command:49.Disconnect the cable from e1a on node1.Connect e1a on node1to port1on cs1,using theappropriate cabling supported by the CN1610switches.For more information on cabling,seeInstallation and Setup Instructions of your storage system and Clustered Data ONTAP Switch Setup and Configuration Guide.10.Disconnect the cable from cluster port e1a on node2.Connect e1a to port2on cs1,using theappropriate cabling supported by CN1610switches.11.12.13.14.Revert clus1(which was previously migrated)on both nodes back to e1a with the network interfacee the network interface show command to ensure that all cluster LIFs are up and operational anddisplay true in the Is Home column:516.17.On the console of each node,use the network interface migrate command to migrate clus2to porte the network port modify to shut down cluster port e2a on both e the network port19.Disconnect the cable from e2a on node1.Connect e2a on node1to port1on cs2using theappropriate cabling supported by CN1610switches.20.On node2,disconnect the cable from cluster port e2a.Connect e2a to port2on cs2,using theappropriate cabling supported by CN1610switches.21.622.23.24.On all nodes,revert clus1(which was previously migrated)back to e1a with the network interfacee the network interface show command to verify that all of the interfaces display true in the Ise the show isdp neighbors command to verify that both nodes have two connections to eachswitch.7e the run*cdpd show-neighbors command to ensure that each cluster port is connected correctlyto each cluster switch.This example verifies that cluster ports e1a and e2a are connected to the corresponding ports on28.29.e the network interface modify command and set the auto revert parameter to true on clus131.For more information,see Clustered Data ONTAP Switch Setup and Configuration Guide.Migrating to a two-node switched cluster(systems with a single cluster-network connection)If you have N3150,N3220,and N3240systems in an existing two-node switchless cluster in which each controller has a single,back-to-back10-GbE connection for cluster connectivity,you can use the switchless-cluster networking option and replace the direct back-to-back connectivity with switch connections.This is a non-disruptive procedure.Before you beginv Two cluster connections are required to migrate from a switchless configuration to a switched configuration.8v The cluster must be healthy and consist of two nodes connected with back-to-back connectivity.The nodes must be running Data ONTAP8.2or later.v The switchless cluster feature cannot be used with more than two nodes.v All cluster ports must be in the up state.About this taskThis procedure removes the direct cluster connectivity in a switchless environment and replaces each connection to the switch with a connection to the partner node.Procedure1.Check the cluster status of the nodes by entering the following command at the system console ofeither node:cluster show2.Check the status of the by entering the following command at the system console of either node:storage failover show3.Enter the following command at either node's prompt to change to the advanced privilege level:set-privilege advancedYou can respond y when prompted to continue into advanced mode.The advanced mode prompt appears(*>).4.Verify that the current state of the switchless cluster is true and then disable switchless-cluster mode:network options switchless-cluster modify-enabled false5.Enter the following command to return to the admin privilege level:set-privilege admin6.Take over the target node by entering the following command:storage failover takeover-ofnode target_node_nameIt does not matter which node is the target node.When it is taken over,the target nodeautomatically reboots and displays the Waiting for giveback...message.The active node is now serving data for the partner(target)node that has been taken over.7.It a node is impaired,wait at least two minutes after the takeover of the impaired node to ensurethat the takeover completed successfully.8.With the target node showing the Waiting for giveback...message,shut it down.The method youuse to shut down the node depends on whether remote management via a Service Processor(SP)is used.Is the SP configured?Then...Yes Log in to theimpaired node's SP and enter the followingcommand:system power off.9Is the SP configured?Then...No At the impaired node's prompt,press Ctrl-C andrespond Y to halt the node.9.On each controller,disconnect the cable that connects the10G cluster port to the switchless cluster.10.Connect the10-GbE cluster port to the switch on both controllers.Verify that the10-GbE clusterports connected on the switch are configured to be part of the same VLAN.If you plan onconnecting the cluster ports on each controller to different switches,verify that the ports on which the cluster ports are connected on each switch are configured for the same VLAN and that trunking is properly configured on both switches.11.Enter the following command to give back storage to the target node:storage failover giveback-ofnode node212.Enter the storage failover show-giveback command to monitor the progress of the givebackoperation.13.After the giveback operation is complete,enter the storage failover show command to confirm that14.Verify that the cluster port LIFs are operating correctly:15.Check the cluster status of the nodes by entering the following command at the system console ofeither node:cluster show16.Verify cluster connectivity with the cluster ping-cluster local command:a.Enter the following command at either node's prompt to change to the advanced privilege level:set-privilege advancedYou can respond y when prompted to continue into advanced mode.The advanced mode prompt appears(*>).b.Enter the following command to ping the cluster ports:cluster ping-cluster localThe command output should show connectivity between all cluster ports.c.Enter the following command to return to the admin privilege level:set-privilege admin10©Copyright IBM Corporation2013.US Government Users Restricted Rights–Use,duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.SC27-6298-00。
多语言快速安装指南说明书
Multi-Languages QIG in Driver CD================================================== Český:Českého průvodce rychlou instalací naleznete na přiloženém CD sovladačiDeutsch: Finden Sie bitte das deutsche QIG beiliegend in der Treiber CD Español: Incluido en el CD el QIG en EspañolFrançais:Veuillez trouver l‟français QIG ci-joint dans le CDItaliano: Incluso nel CD il QIG in ItalianoMagyar: A magyar telepítési útmutató megtalálható a mellékelt CD-n Nederlands: De nederlandse QIG treft u aan op de bijgesloten CDPolski: Skrócona instrukcja instalacji w języku polskim znajduje się na załączonej płycie CDPortuguês: Incluído no CD o QIG em PortuguesРусский: Найдите QIG на pусскoм языке на приложеном CD Romana: Cd-ul cuprinde Ghid de instalare rapida in limba romanaSlovensky: Anglického sprievodcu rýchlou inštaláciou nájdete na priloženom CD s ovládačmi.Türkçe: Ürün ile beraber gelen CD içinde Türkçe Hızlı Kurulum Kılavuzu'nu bulabilirsinizCopyright by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this Company.This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Further, this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. For more detailed information about this product, please refer to the User's Manual on the CD-ROM. The software and specifications could be subjected to change without notice. Please visit our web site for the update. All right reserved including all brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders .Content1.Product Information (1)2.Check your package contents (1)3.System Requirement (1)4.Hardware Installation (2)4.1.LED and Focusing (2)4.2.Camera Ports (3)4.3.Installation Procedure (4)5.Locate the IP Address (5)6.Web Management Interface (9)7.Software Installation (12)work Configuration (18)work Setting (19)8.1.2.Wireless Settings (IC-1510Wg Only) (21)9.Firmware Upgrade (24)1. Product Information⏹Complies with IEEE802.3, 802.3u standards⏹Complies with Wireless 802.11b/g standards with WEP, WPA and WPA2encryption (IC-1510Wg only)⏹Supports high speed hardware-based Motion-JPEG compression⏹Supports video resolution :640x480 (VGA), 320x240 (CIF) and160x120(QCIF)⏹Supports Snapshot-to-Email on events and predetermined schedulerecordings in AVI format⏹Supports Auto Brightness/Contrast/Hue Control⏹Built-in manual focus lens2. Check your package contents⏹One Internet Camera⏹One Power Adapter⏹One Camera Stand⏹One 100cm Category 5 Ethernet Cable⏹One Quick Installation Guide⏹One CD (Including User‟s Manual/ Multi-Language QIG/ Utility & Viewer) ⏹One Antenna(* IC-1510Wg Only)If any of the above items are missing, please contact your supplier.3. System RequirementSystem requirement for PC, MAC or Notebook PC to access the Internet Camera as following:⏹OS System: Windows 98, ME, 2000, XP + SP2, Server 2003⏹CPU: Intel Pentium III 750MHz above or Intel Celeron 1GHz above⏹Memory Size: 128MB (256MB recommended)⏹VGA Card Resolution: 800 x 600 or above4.Hardware Installation4.1.LED and FocusingThe Camera head and its focus ring allow you to modify the aim and focus of the Camera. To adjust the Camera‟s focus, rotate the dark focus ring.There are three LEDs indicating the camera status and networking status. • PowerWhen the camera is power on and ready for access, the LED will light. • LANWhen the Internet Camera is linking to wired network, the LED is lighting. The LED is flashing when video is transmitted or received through wired network. • WLANWhen the Internet Camera is linking to wireless network, the LED islighting. The LED is flashing when video is transmitted or received through wireless network.4.2. Camera PortsThe Camera features two ports and a Reset button. • Antenna connectorThe Standard reverse SMA connector is for any antennas with reverseSMA connector can connect to the Internet Camera.•PowerThe Power port is where you can connect the power adapter. •LANThe LAN port is where you can connect the Ethernet network cable. •Reset1. If problems occur with your Internet Camera, press the reset buttonwith a pencil tip (for less than 2 seconds) and the Internet Camera will reboot itself with your configurations.2. If problems persist or you experience extreme problems or you forgotyour password, press the reset button for longer than 5 seconds. The Internet Camera will reset itself to the factory default settings (warning: your original configurations will be replaced with the factorydefault settings).4.3. Installation Procedure1. Unpack the Internet Camera package and verify that all the items listed inthe Chapter 1 are provided.2. Connect the Internet Camera to your network by attached the networkcable from the switch/router to the LAN port of the Internet Camera.3. Connect the power adapter to the Internet Camera and plug the poweradapter to power outlet. The Internet Camera will be powered on. When the Internet Camera is ready, the Ready LED will light.Note: It is highly recommended to use the power adapter shipped with the Internet Camera, do NOT use any other power adapter from any sources.5. Locate the IP AddressDefault IP address of this IP camera is 192.168.2.3. If you wish to assign another IP address to this IP camera, you have to log onto the web configuration interface of the camera first.If the left three fields of the IP address of your computer is not 192.168.2.XXX , you‟ll have to change the IP address of your computer first:1. Click …Start‟ -> …Control Panel‟2. Double-click …Network Connections‟ icon.3. Right-click …Local Area Connection‟, and click …Properties‟.4. Select …Internet Protocol (TCP/IP)‟, and then click …Properties‟.5. In …IP address‟ field, please fill in any IP address begins with …192.168.2‟,and ends with a value greater than 2 and less than 254 (You can use the example in the picture …192.168.2.239‟). In Subnet mask field, please fill …255.255.255.0‟. Please keep all other fields empty, and click …OK‟.If you changed the IP address of this IP camera and you forget it, there‟re 2 methods to recover it:a. Press and hold the …Reset‟ button located at the bottom of this IPcamera, to clear all settings of the IP camera and reset the IP address back to 192.168.2.3. You‟ll lose all settings in the IP camera.b. Ask network administrator to check the DHCP release table, if thecamera was set to obtain the IP address by DHCP, a new record will be added to DHCP release table on DHCP server when the IP camera isconnected to the local area network6. Web Management InterfaceMake sure the IP camera is correctly powered (Power LED is on), and then launch Internet Explorer and type the IP address of the IP camera in address bar of Internet Explorer. You should be prompted to input the user name and password:Default user name is …admin‟ (in lower case) and password is …1234‟. Click …OK‟ to continue after user name and password has entered.If you‟re rejected, maybe the password has been modified previously. This should not happen if this is a newly-purchased camera, however, if you get the camera from someone else, the password would be changed. Please try to obtain the correct user name / password, or you‟ll have to reset the ca mera. After logged on, you should see the following messages at the top of Internet Explorer:This IP camera requires a special ActiveX control (A.K.A. …Plugin‟) to work. Please click on the message, and select …Install ActiveX Control…‟:When y ou‟re prompted, click …Install‟ to continue.You should be able to see the image from camera now:Note: If you see one of these messages (or both):ORYour computer may not have the display capability that this IP camera requires, or you don’t have Microsoft DirectX® installed. Please download Microsoft DirectX® from Microsoft’s website (), and try again. In some cases, your computer is able to display the image from IP camera correctly, but you’ll still see these messages. If this happens, just ignore them.7. Software InstallationFollow the simple steps below to run the Install Wizard to guide you quickly through the Installation process. The following installation is implemented in Windows XP. The installation procedures in Windows 2000/XP/Server 2003 /Vista are similar.1. Insert the CD shipped along with the Internet Camera into your CD-ROMdrive. The “Autorun.exe” program should be executed automatically. If not, run “Autorun.exe” manually from “Autorun” folder in the CD.2. The Install Wizard will show four selections, select the program you want toinstall or click “Exit” to install the program later. The following installation steps are the demonstration of “Setup Utility”3. The system will start the installation procedures. Click “Next” to continueinstallation.4. If you wish to install the software program in an alternate location, click“Change”; otherwise click “Next” to move on to the next step.5. Click “Install” to start installing the program.6. The system will install the program automatically.7. Click “Finish” to complete the software installation.8. When the installation is completed. The system will auto run ”Administrator Utility “. On the Internet Camera first page, the cameras found in thenetwork are listed in the left window. Choose the one you want to configure and click “Setting Wizard” to precede.If the camera is new and is not configured with your network, please go to next section “8 Network configurations”to set up the configuration9. Please enter the default password “1234” and click “OK” to login to the IPsetup page.10. Internet Camera is working through the network (TCP/IP Protocol). The IPaddress setting must be correct, or you cannot access to the camera. The wizard program will detect the IP address status of your networkautomatically and suggest a free IP address for the Camera. You canaccept the suggested value or enter the value manually. If you enter the value manually, please be aware that the “Subnet Mask” must be the same for both the camera and the PC. Click “Finish” to apply the configuration.11. This wizard will pop up a window to ask you if you want to run the “CameraViewer” and see the video of the Camera immediately. Select “OK” to run “Camera Viewer”.12. The “Camera Viewer” will show the video automatically. Congratulations,you can use the camera through the network to view the video from now on.8. Network ConfigurationsWhen you click the “Detail Setting”, a screen will pop up for you to enter the “Administrator Name” and “Password”. The default value is as follows. Name: “Admin”Password: “1234”If the name and password you enter are correct, you can start to setup the network configuration of this IP camera.8.1.1.Network SettingInternet Camera Name recommended to name a meaningful name for the camera.IP Address Enter an unused IP Address within the IP address range used on your LAN. If the IP Address of your LAN is from the 192.168.2.1 to 192.168.2.254, you can set an unused IP Address from the range for the camera, for example: 192.168.2.250.Subnet Mask The Subnet Mask field must match the subnet setting on your LAN. For example: 255.255.255.0.Gateway The Gateway is used to forward frames to destinations in a different subnet on the Internet. The Gateway setting must be the same with the gateway used by the PCs on your LAN.DNS Server DNS Server (Domain Name Server) that translates names to IP addresses. Set the same DNS Server as the PCs on your LAN.Video Port video streaming in the network. The default port setting is “4321”. If you want to view the video from the camera, the port setting should be correct.Web Port This camera support web connection, the default web port is 80. Since the web server may use port 80, you can use a different port for the camera. If you change the web port from 80 to 8080, you must type http://192.168.2.3:8080 to connect the camera through the web browser.8.1.2. Wireless Settings (IC-1510Wg Only)You must configure the wireless settings from wired environment. Then you can remove the wired cable and start wireless connection.Utility will site survey automatically or you can press “Refresh” button to survey the AP router manually.After site survey procedure, there will show existing AP SSID.Then press “Connect” to connect AP router or press “Add to Profile” to configure the Wireless WEP and WPA encryption.There are WEP (Open System/Shared Key) ,WPA-PSK,WPA2-PSK and WPANone encryption settings. You can choose one to match AP router wireless settings.After set the profile, Please remove the LAN cable then IP Camera will connect to AP router automatically.LED Status DiagramWired Setting EnvironmentWireless Setting Environment9. Firmware UpgradeHere provides several tools to upgrade the firmware of this IP camera, clear all settings, or switch LED notification off.The descriptions of every setting in this menu will be given below:After all settings are completed, click …OK‟ to save settings, or click …Cancel‟ to abort and discard changes.R&TTE Compliance StatementThis equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE)The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.SafetyThis equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.EU Countries Intended for UseThe ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Bulgaria, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Poland, Romania, Slovakia, Slovenia, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom.The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.EU Countries not intended for useNonePlease check the declaration of conformity on 。
HS8916_V0.6_Datasheet Preliminary
QUAD-BAND GSM/GPRS/EDGE W Multi-Mode Transmit Module with Fourteen Linear TRx Switch Ports andDual-Band TD-SCDMA B34/39 and TDD LTE B39HS8916 Preliminary DatasheetVersion 0.62016-03-21HS8916 Front-end ModuleProduct Features ApplicationsG N DG N DG N DG N DG N DC P LG NDN CTRX10ANT TRX9TRX8GND GNDGND TRX11TRX12TRX13TRX14•LGA: 5.5 mm x 5.3 mm x 0.85 mm Max•Fully programmable MIPI RFFE control •Fourteen low -insertion-loss TRx ports (fiveultra-low loss) with enhanced linearity, for state-of-the-art 4G performance and GPS /•Cellular handsets encompassing Quad -Band GSM/EDGE, Dual-Band TD-SCDMA, and TDD LTE- Class 4 GSM850/900 - Class 1 DCS1800/PCS1900Product DescriptionThe HS8916 is a high-power, high-efficiency Front-End Module for GSM850/900, DCS1800, PCS1900 operation. The FEM supports Class.12 General Packet Radio Service (GPRS), EDGE multi-slot operation, and TD-SCDMA and TDD LTE linear transmission.The module provides 50 ohm impedance at input and output ports, consists of a CMOS Controller, a SP16T RF switch, a power amplifier supporting GSM850/900, DCS1800/PCS1900, TD-SCDMA bands 34/39, and TDD LTE band 39. The module integrated Tx low pass harmonic filtering can achieve best harmonic performance.The HS8916 provides high-power and high-efficiency Pout for GSM850/900, DCS1800, PCS1900 operation mode. In EDGE and TD-SCDMA / TDD LTE linear modes, VRAMP voltage and MIPI-based bias settings optimize PA linearity and efficiency.Absolute Maximum RatingsMIPI RFFE REGISTER MAP (1 OF 2)MIPI RFFE REGISTER MAP (2 OF 2)Electrical Specifications – TX GSM850/900 Band, GSMK ModeElectrical Specifications – TX GSM850/900 Band, EDGE ModeElectrical Specifications – TX DCS1800/1900 Band, GMSK ModeElectrical Specifications – TX DCS1800/1900 Band, EDGE ModeElectrical Specifications – TX TD-SCDMA B39 BandElectrical Specifications – TX TDD LTE B39 BandElectrical Specifications – TX TD-SCDMA B34 BandElectrical Specifications – Ports TRx1 to TRx14 ModePin-Out DiagramT R X 7T R X 6T R X 5G N DT R X 1T R X 2T R X 3T R X 4HS8916 Application CircuitT R X 7T R X 6T R X 5G N DR X 1T R X 2T R X 3T R X 4Package DrawingThe HS8916 is encapsulated in a 5.5×5.3×0.85mm Land Grid Array (LGA) package on a laminate substrate. The HS8916 is RoHS compliant.。
华硕 MS-7646M1 (V1.X) 主板 用户手册说明书
Copyright NoticeThe material in this document is the intellectual property of the company. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.TrademarksAll trademarks are the properties of their respective owners.Intel® and Pentium® are registered trademarks of Intel Corporation.AMD, Athlon™, Athlon™ XP, Thoroughbred™, and Duron™ are registered trade-marks of AMD Corporation.NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trade-marks of NVIDIA Corporation in the United States and/or other countries.PS/2 and OS®/2 are registered trademarks of International Business Machines Corporation.Windows® 95/98/2000/NT/XP are registered trademarks of Microsoft Corporation. Netware® is a registered trademark of Novell, Inc.Award® is a registered trademark of Phoenix Technologies Ltd.AMI® is a registered trademark of American Megatrends Inc.Revision HistoryRevision Revision History DateV1.0First Release February 2010Technical SupportIf a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.Safety Instructions1.Always read the safety instructions carefully.2.Keep this User’s Manual for future reference.3.Keep this equipment away from humidity.y this equipment on a reliable flat surface before setting it up.5.The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS.6.Make sure the voltage of the power source and adjust properly 110/220V before connecting the equipment to the power inlet.7.Place the power cord such a way that people can not step on it. Do not placeanything over the power cord.8.Always Unplug the Power Cord before inserting any add-on card or module.9.All cautions and warnings on the equipment should be noted.10.Never pour any liquid into the opening that could damage or cause electricalshock.11.If any of the following situations arises, get the equipment checked by servicepersonnel:The power cord or plug is damaged.Liquid has penetrated into the equipment.The equipment has been exposed to moisture.The equipment does not work well or you can not get it work according to User’s Manual.The equipment has dropped and damaged.The equipment has obvious sign of breakage.12.DO NOT LEAVE THIS EQUIPMENT IN A N ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 600 C (1400F), IT MAY DAMAGE THE EQUIPMENT.Danger of explosion if battery is incorrectly replaced.only with the same or equivalent type recommended by theFCC-B Radio Frequency Interference StatementThis equipment has beentested and found to complywith the limits for a Class Bdigital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor-dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below.Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/television technician for help. Notice 1The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Notice 2Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.MS-7646M1This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.CONTENTSCopyright Notice (ii)Trademarks (ii)Revision History (ii)Technical Support (ii)Safety Instructions (iii)FCC-B Radio Frequency Interference Statement (iv)Chapter 1 Getting Started.....................................................................................1-1 Mainboard Specifications.......................................................................1-2Chapter 2 Hardware Setup...................................................................................2-1 Mainboard Layout...................................................................................2-2CPU (Central Processing Unit)...............................................................2-3Memory....................................................................................................2-6Power Supply..........................................................................................2-8Back Panel...............................................................................................2-9Connector...............................................................................................2-11Jumper...................................................................................................2-16Slot.........................................................................................................2-17Getting StartedMS-7646M1 (V1.X) Micro-ATX MainboardCPU (Central Processing Unit)The mainboard supports 95W AMD® Phenom/ Athlon 64/ Sempron processors in Socket AM3. The Socket AM3 offers easy CPU installation. When you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer.tightly on top of the CPU to make sure the CPU is properly and com-pletely embedded into the socket.Installing CPU Cooler SetWhen you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer.2. Then press down the other end of the clip to fasten the cooling set on the top of the retention mechanism.Locate the Fix Lever and lift up it .1.Position the cooling set onto the retention mechanism. Hook one end of the clip to hook first.3.Fasten down the lever.4.Attach the CPU Fan cable to the CPUDIMM3DIMM4DIMM1DIMM2DIMM3DIMM4Installing Memory Modules1. The memory module has only one notch on the center and will only fit in the rightorientation.2. Insert the memory module vertically into the DIMM slot. Then push it in until thegolden finger on the memory module is deeply inserted in the DIMM slot. The plastic clip at each side of the DIMM slot will automatically close when the memory module is properly seated.3. Manually check if the memory module has been locked in place by the DIMM slotclips at the sides.There is also a foolproof design on pin 11, 12, 23 & 24 to avoid wrong installation.ATX 12V Power Connector: PWR1This power connector is used to provide power to the CPU.pin 12pin 13Pin DefinitionSIGNAL +3.3V -12V GND PS-ON#GND GND GND Res +5V +5V +5V GNDPin Definition3 4Back PanelThe standard PS/2® mouse/keyboard DIN connector is for a PS/2® mouse/keyboard.IEEE 1394 Port (Optional)The 1394 port on the back panel provides connection to 1394 devices.The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard,mouse, or other USB-compatible devices.LANThe standard RJ-45 LAN jack is for connection to Local Area Network (LAN). Youcan connect a network cable to it.Line-In IEEE 1394Optical S/PDIF-OutLink IndicatorConnectorSPI Flash ROM Connector: JSPI1This connector is used to flash SPI flash ROM.Serial ATA Connector: SATA1~6This connector is a high-speed Serial ATA interface port. Each connector can con-nect to one Serial ATA device.Pin DefinitionJSPI1S A T A 4SA TA1S A T A 5SA TA2S A T A 6SA TA39 101 2CPUFAN1CD-In Connector: JCD1This connector is provided for external audio input.JAUD1Front Panel Audio Connector: JAUD1This connector allows you to connect the front panel audio and is compliant with Intel ® Front Panel I/O Connectivity Design Guide.JCD1RL 12910JUSB1~3129Front Panel Connectors: JFP1The mainboard provides one front panel connector for electrical connection to the front panel switches and LEDs. JFP1 is compliant with Intel ® Front Panel I/O Connec-tivity Design Guide.JFP1IEEE 1394 Connector: J1394_1 (Optional)This connector allows you to connect the IEEE 1394 device via an optional IEEE 1394bracket.J1394_1 1 2 9 101 92 101JBAT1Clear DataKeep DataSlotPCI (Peripheral Component Interconnect) Express SlotThe PCI Express slot supports the PCI Express interface expansion card. The PCI Express x16 slot supports up to 4.0 GB/s transfer rate. The PCI Express x1 slot supports up to 250 MB/s transfer rate.PCI (Peripheral Component Interconnect) SlotThe PCI slot supports LAN card, SCSI card, USB card, and other add-on cards that comply with PCI specifications.PCI Express x16 SlotPCI Express x1 SlotPCI Interrupt Request RoutingThe IRQ, acronym of interrupt request line and pronounced I-R-Q, are hardware lines over which devices can send interrupt signals to the microprocessor. The PCI IRQpins are typically connected to the PCI bus pins as follows:。
聚英电子 云系列 DAM-PT16-WIFI 网口版产品说明书
云系列PT16-WIFI网口版说明书V1.0北京聚英翱翔电子有限责任公司2016年01目录一、产品说明 (1)二、产品特点 (1)三、产品功能 (1)四、产品选型 (1)五、主要参数 (1)六、通讯说明 (2)1、WIFI连接 (2)2、WiFi复位说明 (2)3、架构说明 (3)七、快速使用说明 (4)八、硬件说明 (5)1、接口说明 (5)2、引脚说明 (5)九、设备参数配置 (5)1、网络配置 (5)十、设备唯一ID号 (5)1、扫描二维码获取 (6)十一、平台软件说明 (6)十二、开发资料说明 (6)1、通讯协议说明 (6)2、Modbus寄存器说明 (6)3、相关指令 (8)4、指令详解 (8)十三、技术支持联系方式 (9)一、产品说明DAMPT16设备是我公司云系列设备中网络版的一种，设备通过连接Internet广域网来进行通讯，使用我司配套的云平台软件可实现远程采集温度数据的功能，每个设备具有唯一ID号方便用户进行二次开发使用。
二、产品特点●供电电压DC7-40V；●通讯接口支持无线WIFI+RJ45以太网口；●设备默认IP为192.168.16.254；●设备默认WIFI名称为HI_Link_**（**代表随机数字字母组合）；●支持标准modbus协议，同时支持ASCII/RTU格式；●测量芯片采用24位AD转换器,精度可做到0.02度；●支持用户二次开发。
三、产品功能●16路PT100采集通道；●支持5位寻址地址；●支持波特率：2400,4800,9600,19200,38400。
●同时支持局域网和外网控制使用；●支持UDP/TCP工作模式；●支持Client、Server模式；●支持透传、力控、组态王、Modbus tcp连接；四、产品选型五、主要参数六、通讯说明1、WIFI连接设备供电后，会出现一个HI_LINK_**的WIFI信号，WIFI连接密码为12345678，连接后，对设备进行参数配置。
Besovideo 4G无线实时高清图传BVS W1010 VE x微型模块规格书
4G无线实时高清图传微型模块规格书BVS_W1010_VE_x1产品规格微型3G4G无线高清视频实时传输产品，详细规格如下表：接口说明核心处理器业界顶级媒体处理器HI3516/A视频输入支持HDMI高清视频输入HDMI高清输入，720P/1080P，支持LAWMATE/GOPRO/小米运动相机/DV等视频压缩H.264 HP@720P/1080P/VGA/D1/CIF, 1-25fps视频输出设备不带LCD屏显，可通过4G传输至服务器用相关客户端查看视频图像；音频输入支持，音视频同步传输；录像存储支持TF卡保存录像文件（非标配，需定制）；无线网络内置1个4G模块，支持4G全网通/3G/WCDMA；支持多种3G/4G上线模式，手工、短信等，用户可自如的控制3G数据流量；采用外置天线，优于内置天线，可保证信号强度以太网N/A报警N/A串口一路RS-485，支持PTZ （非标配，需定制）定位N/A，可定制扩展按键N/A供电12V直流供电尺寸PCB：65（长）*40（宽）*14（高）mm；工作温度工作温度：-10℃～60℃配置与升级支持本地局域网配置以及通过后端平台软件的远程配置其他功能具备LED指示灯：电源、存储、4G网络连接指示灯智能算法N/A后端平台统一接入优视科技大型网络视频综合业务平台软件——SmartEye2主要特性优视4G无线视频监控产品，主要实现音视频流的无线传送及本地录像存储，详细如下：✓支持多种高清摄像头接入，自适应匹配，；✓业界体积最小的HDMI高清编码+无线图传模块；✓高度优化的窄带无线信道视频流传输协议，丢包率低于2%，网络延迟典型值1-3秒，无马赛克，视频平滑流畅；✓提供“流媒体服务器+客户端”的大型网络视频后端监控平台软件SmartEye TM，开放SDK，可快捷嵌入各行业原有系统平台；3应用领域⏹各地公安技侦密拍取证⏹嵌入各类枪机、球机提供3G4G无线实时图传；⏹无人飞行器无线航拍4硬件说明4.1 外观图示产品图示：4.2 接口图注。
7月台电摄像头业务部价
联系人：王国华8752445513804567101875244558752446687524477序号产品名称产品图片产品特色代理价媒体价备注轻骑兵高清免驱TL-L110-NDK2K 外置麦、相机镜头彩蛋L280的图像效果TL-L130-NDE2W/P L110的超低价格全能王（网吧版）夜视灯，液晶专用被夹TL-L150-NDK2B 低端网吧主力产品液晶王全能卡座、高清晰免驱TL-L212A-NDE2R 效果全面升级、带夜视天眼高清免驱、外置麦TL-L300A-NDD2K 带夜视灯、相机镜头特效王高清免驱、全新9种特效TL-T700-NDK2S 外置麦、相机镜头全能王（个人版）集L300A 和T700的卖点一体TL-L360-NDK2B 内置麦，夜视灯，9种特效网吧之星三代(工包)液晶专用,特配耳机挂钩TL-L290-NDD2S 网吧高清方案睿眼笔记本专用TL-N525-NDD2K 高清晰免驱小红帽零售主力产品TL-L280-NDD2K 豪华免驱方案蝙蝠侠中星微台电特供免驱方案TL-T760A-NDE2K 方案完全针对网吧环境变形金刚全能变形TL-T838-NDE2S 免驱USB2.0豪华方案变形金刚mini 新合金外壳TL-T828-NDD2S 中星微301免驱方案高清HD720PHD720P 全屏高清30帧TL-HD720P-NDK2B 免驱，线控夜视灯变形金刚 铁蛋锌合金外壳、重达半斤TL-T868-NDK2S 免驱，超大相机镜头自动对焦摄像头比相机先进的自动对焦TL-T790-NDE2K 内置麦、800W 镜头无线摄像头（10M ）真正全球首款无线摄像头TL-W800-NDE2K 豪华800万数码镜头无线摄像头（200M ）无线距离高达 200M TL-W900-NDS2W高清全屏图像，内置麦产品部（签 字）：总经理(签 字):日 期：日 期:14181516171113127891056123473台电私模98316965353668 68383368台电私模984198983846台电私模4146108台电私模125108128台电私模45台电私模158台电私模138台电私模台电私模哈尔滨东方四海报价单（代理价）台电（TECLAST ）高清无驱摄像头系列台电私模6812865台电私模430190799199台电私模399299。
电脑配置
CPU处理器英特尔Celeron(赛扬) G1610 @ 2.60GHz速度 2.60 GHz (100 MHz x 26.0)处理器数量核心数: 2 / 线程数: 2核心代号Ivy Bridge生产工艺22 纳米插槽/插座Socket H2 (LGA 1155)一级数据缓存32 KB, 8-Way, 64 byte lines一级代码缓存32 KB, 8-Way, 64 byte lines二级缓存256 KB, 8-Way, 64 byte lines (速度: 2594 MHz)三级缓存 2 MB, 8-Way, 64 byte lines特征MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, EIST 主板主板型号技嘉H61M-S1芯片组英特尔Ivy Bridge - H61 芯片组板载设备视频设备(启用)BIOS American Megatrends Inc. FC制造日期02/25/2013内存DIMM 0: 金士顿DDR3 1333MHz 2GB制造日期2013 年05 月型号7F98 99U5474-025.A00LF序列号: 7EB80872硬盘产品西数WDC WD5000AZLX-00K4KA0大小500 GB转速7200 转/分缓存32 MB硬盘已使用共69 次，累计388 小时固件80.00A80接口SATA III数据传输率600 MB/秒特征S.M.A.R.T, 48-bit LBA, NCQ显卡主显卡英特尔Ivy Bridge Graphics Controller显存 1 GB制造商技嘉BIOS日期05/22/20驱动版本 6.14.10.5421驱动日期20120731显示器产品宏碁ACR0340 Acer P209HQL固件日期2013 年06 月屏幕尺寸19.4 英寸(43 厘米x 24 厘米)显示比例宽屏16 : 9分辨率1600 x 900 32 位真彩色光驱产品华硕DVD-E818A9T b DVD光驱缓存/固件: 198 KB / 1.00网卡网卡瑞昱RTL8168E PCI-E Gigabit Ethernet NIC制造商技嘉声卡声卡瑞昱ALC887 @ 英特尔6 Series Chipset 高保真音频键盘键盘标准101/102 键或Microsoft 自然PS/2 键盘鼠标鼠标微软PS/2 鼠标。
NVIDIA网络ThinkSystem Mellanox ConnectX-6 Lx 10 25Gb
ThinkSystem Mellanox ConnectX-6 Lx 10/25GbESFP28 Ethernet AdaptersProduct GuideThe ThinkSystem Mellanox ConnectX-6 Lx 10/25GbE SFP28 Ethernet Adapters from NVIDIA Networking are high performance 25Gb Ethernet network adapters that offer multiple network offloads including RoCE v2, NVMe over Ethernet and Open vSwitch.The following figure shows the ConnectX-6 Lx 10/25GbE SFP28 2-Port OCP Ethernet Adapter (the standard heat sink has been removed in this photo).Figure 1. ThinkSystem Mellanox ConnectX-6 Lx 10/25GbE SFP28 2-Port OCP Ethernet Adapter (with heatsink removed)Did you know?NVMe storage devices are gaining popularity by offering very fast storage access. The evolving NVMe over Fabric (NVMe-oF) protocol leverages the RDMA connectivity for remote access. ConnectX-6 offers further enhancements by providing NVMe-oF target offloads, enabling very efficient NVMe storage access with no CPU intervention, and thus improving performance and reducing latency.Click here to check for updatesFigure 2. ThinkSystem Mellanox ConnectX-6 Lx 10/25GbE SFP28 2-Port PCIe Ethernet Adapter (with heatsink removed)Supported transceivers and cablesThe following table lists the supported transceivers.Table 2. TransceiversPart number Feature code Description1Gb Transceivers00FE333A5DL SFP 1000Base-T (RJ-45) Transceiver10Gb Transceivers46C34475053SFP+ SR Transceiver4TC7A78615BNDR ThinkSystem Accelink 10G SR SFP+ Ethernet transceiver4TC7A90142BWG5SFP+ 10G LR Transceiver PRC only (for China only)25Gb Transceivers4M27A67041BFH2Lenovo 25Gb SR SFP28 Ethernet Transceiver7G17A03537AV1B Lenovo Dual Rate 10G/25G SR SFP28 Transceiver4TC7A88638BYBJ ThinkSystem Finisar Dual Rate 10G/25G SR SFP28 Transceiver25Gb transceivers: When installed in this 25Gb Ethernet adapter, 25Gb transceivers are designed to operate at either 25 Gb/s or 10 Gb/s speeds as listed in the description of the transceiver, however the speed also depends on the negotiation with the connected switch. In most configurations, this negotiation is automatic, however in some configurations you may have to manually set the link speed or FEC mode.The following table lists the supported fiber optic cables and Active Optical Cables.Part number Feature code DescriptionLC-LC OM3 Fiber Optic Cables (these cables require a 10 GbE SFP+ SR or 25 GbE SFP28 SR transceiver) 00MN499ASR5Lenovo 0.5m LC-LC OM3 MMF Cable00MN502ASR6Lenovo 1m LC-LC OM3 MMF Cable00MN505ASR7Lenovo 3m LC-LC OM3 MMF Cable00MN508ASR8Lenovo 5m LC-LC OM3 MMF Cable00MN511ASR9Lenovo 10m LC-LC OM3 MMF Cable00MN514ASRA Lenovo 15m LC-LC OM3 MMF Cable00MN517ASRB Lenovo 25m LC-LC OM3 MMF Cable00MN520ASRC Lenovo 30m LC-LC OM3 MMF CableMTP-4xLC OM3 MMF Breakout Cables (these cables require a transceiver)00FM412A5UA Lenovo 1m MPO-4xLC OM3 MMF Breakout Cable00FM413A5UB Lenovo 3m MPO-4xLC OM3 MMF Breakout Cable00FM414A5UC Lenovo 5m MPO-4xLC OM3 MMF Breakout CableSFP+ 10Gb Active Optical Cables00YL634ATYX Lenovo 1m SFP+ to SFP+ Active Optical Cable00YL637ATYY Lenovo 3m SFP+ to SFP+ Active Optical Cable00YL640ATYZ Lenovo 5m SFP+ to SFP+ Active Optical Cable00YL643ATZ0Lenovo 7m SFP+ to SFP+ Active Optical Cable00YL646ATZ1Lenovo 15m SFP+ to SFP+ Active Optical Cable00YL649ATZ2Lenovo 20m SFP+ to SFP+ Active Optical CableQSFP28 100Gb Breakout Active Optical Cables7Z57A03552AV1S Lenovo 5m 100G to 4x25G Breakout Active Optical Cable7Z57A03554AV1U Lenovo 15m 100G to 4x25G Breakout Active Optical CableOM4 LC to LC Cables (these cables require a transceiver)4Z57A10845B2P9Lenovo 0.5m LC-LC OM4 MMF Cable4Z57A10846B2PA Lenovo 1m LC-LC OM4 MMF Cable4Z57A10847B2PB Lenovo 3m LC-LC OM4 MMF Cable4Z57A10848B2PC Lenovo 5m LC-LC OM4 MMF Cable4Z57A10849B2PD Lenovo 10m LC-LC OM4 MMF Cable4Z57A10850B2PE Lenovo 15m LC-LC OM4 MMF Cable4Z57A10851B2PF Lenovo 25m LC-LC OM4 MMF Cable4Z57A10852B2PG Lenovo 30m LC-LC OM4 MMF CableThe following table lists the supported direct-attach copper (DAC) cables.Part number Feature code DescriptionSFP+ 10Gb Passive DAC Cables00D6288A3RG0.5m Passive DAC SFP+ Cable90Y9427A1PH1m Passive DAC SFP+ Cable00AY764A51N 1.5m Passive DAC SFP+ Cable00AY765A51P2m Passive DAC SFP+ Cable90Y9430A1PJ3m Passive DAC SFP+ Cable90Y9433A1PK5m Passive DAC SFP+ Cable00D6151A3RH7m Passive DAC SFP+ CableSFP28 25Gb Passive DAC Cables7Z57A03557AV1W Lenovo 1m Passive 25G SFP28 DAC Cable7Z57A03558AV1X Lenovo 3m Passive 25G SFP28 DAC Cable7Z57A03559AV1Y Lenovo 5m Passive 25G SFP28 DAC CableQSFP28 100G-to-4x25G Breakout Cables7Z57A03564AV22Lenovo 1m 100G QSFP28 to 4x25G SFP28 Breakout DAC Cable 4Z57A85043BS32Lenovo 1.5m 100G to 4x25G Breakout SFP28 Breakout DAC Cable 4Z57A85044BS33Lenovo 2m 100G to 4x25G Breakout SFP28 Breakout DAC Cable 7Z57A03565AV23Lenovo 3m 100G QSFP28 to 4x25G SFP28 Breakout DAC Cable 7Z57A03566AV24Lenovo 5m 100G QSFP28 to 4x25G SFP28 Breakout DAC CableFeaturesPartNumber Description Edge1S IntelV2AMD V3Intel V34XC7A62580ThinkSystem Mellanox ConnectX-6 Lx 10/25GbE SFP28 2-Port PCIeEthernet AdapterN N N Y Y N N N Y Y Y Y Y Y Y Y Y Y Y4XC7A62582ThinkSystem Mellanox ConnectX-6 Lx 10/25GbE SFP28 2-Port OCPEthernet AdapterN N N N Y N N N Y Y Y Y Y N Y Y Y Y YBMHD ThinkEdge SE450 Mellanox CX6Lx 10/25GbE SFP28 2-Port OCPEthernet AdapterN N N Y N N N N N N N N N N N N N N N Table 6. Server support (Part 2 of 3)PartNumber Description Dense V32S Intel V2AMD V1Dense V24SV28S4XC7A62580ThinkSystem MellanoxConnectX-6 Lx 10/25GbESFP28 2-Port PCIe EthernetAdapterN N N N Y Y Y Y Y Y N Y Y N N N N Y Y Y4XC7A62582ThinkSystem MellanoxConnectX-6 Lx 10/25GbESFP28 2-Port OCP EthernetAdapterN N N N N Y Y Y Y Y N Y Y N N N N Y Y NBMHD ThinkEdge SE450 MellanoxCX6 Lx 10/25GbE SFP28 2-Port OCP Ethernet Adapter N N N N N N N N N N N N N N N N N N N N SE35(7Z46/7D1X)SE35V2(7DA9)SE36V2(7DAM)SE45(7D8T)SE455V3(7DBY)ST5V2(7D8K/7D8J)ST25V2(7D8G/7D8F)SR25V2(7D7R/7D7Q)SR635V3(7D9H/7D9G)SR655V3(7D9F/7D9E)SR645V3(7D9D/7D9C)SR665V3(7D9B/7D9A)SR675V3(7D9Q/7D9R)ST65V3(7D7B/7D7A)SR63V3(7D72/7D73)SR65V3(7D75/7D76)SR85V3(7D97/7D96)SR86V3(7D94/7D93)SR95V3(7DC5/7DC4) SD665V3(7D9P)SD665-NV3(7DAZ)SD65V3(7D7M)SD65-IV3(7D7L)ST65V2(7Z75/7Z74)SR63V2(7Z7/7Z71)SR65V2(7Z72/7Z73)SR67V2(7Z22/7Z23)SR635(7Y98/7Y99)SR655(7Y/7Z1)SR655ClientOSSR645(7D2Y/7D2X)SR665(7D2W/7D2V)SD63V2(7D1K)SD65V2(7D1M)SD65-NV2(7D1N)SN55V2(7Z69)SR85V2(7D31/7D32)SR86V2(7Z59/7Z6)SR95(7X11/7X12)Red Hat Enterprise Linux 8.1N N N N N N N N N N N N N N N Y Y Y Y Red Hat Enterprise Linux 8.2N N N N N N N N N N Y Y Y N N Y Y Y Y Red Hat Enterprise Linux 8.3N N N N N N N N N N Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.4N N N N N N N N N N Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.5N N N N N N N N N N Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.6Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.7N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.8Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.9N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 9.0Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 9.1N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 9.2Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 9.3N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 12 SP4N N N N N N N N N N N N N N N Y N Y N SUSE Linux Enterprise Server 12 SP5N N N N N N N N N N Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 15 SP1N N N N N N N N N N N N N N N Y Y Y Y SUSE Linux Enterprise Server 15 SP2N N N N N N N N N N Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 15 SP3N N N N N N N N N N Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 15 SP4Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 15 SP5Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Ubuntu 18.04.5 LTS N N N N N N N N N N Y Y Y N N N N N N Ubuntu 20.04 LTS N N N N N N N N N N Y Y N N N N N N N Ubuntu 20.04.5 LTS Y N Y Y N Y Y Y N N N N N N N N N N N Ubuntu 22.04 LTS N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y Y Y Ubuntu 22.04.2 LTSY N N N N N N N N N N N N N NNN N N VMware vSphere Hypervisor (ESXi) 6.5U3N N N N N N N N N N N N N N N Y N N N VMware vSphere Hypervisor (ESXi) 6.7U3N N N N N N N N N N Y N N N NYYY YVMware vSphere Hypervisor (ESXi) 7.0N N N N N N N N N N N N N N N Y Y Y Y VMware vSphere Hypervisor (ESXi) 7.0U1N N N N N N N N N N N N N Y Y Y Y Y Y VMware vSphere Hypervisor (ESXi) 7.0U2N N N N N N N N N N Y Y Y Y Y Y Y Y Y VMware vSphere Hypervisor (ESXi) 7.0U3Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y VMware vSphere Hypervisor (ESXi) 8.0NYY YYY Y N N N Y Y Y Y YY Y Y Y VMware vSphere Hypervisor (ESXi) 8.0U1Y Y Y Y Y Y Y Y Y Y Y Y Y Y YYYYYOperating systems S E 455 V S R 630 V S R 635 V S R 645 V S R 650 V S R 655 V S R 665 V S R 675 V S R 850 V S R 860 V S R 630 V S R 650 V S R 670 V S R 850 V S R 860 V S R 635S R 645S R 655S R 66522222222222222222222211VMware vSphere Hypervisor (ESXi) 8.0U2N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y YYYOperating systemsFor limitation, please refer Support Tip 104278 The OS is not supported with EPYC 7003 processors.ISG will not sell/preload this OS, but compatibility and cert only.Table 9. Operating system support for ThinkSystem Mellanox ConnectX-6 Lx 10/25GbE SFP28 2-port PCIe Ethernet Adapter, 4XC7A62580 (Part 1 of 2)Operating systems Microsoft Windows 10N N N N N N N N N N N N N N N N N N Microsoft Windows 11N N N N N N N N N N N N N N N N N N Microsoft Windows Server 2016N N N N N N N N N N N N Y Y Y Y Y Y Microsoft Windows Server 2019Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Microsoft Windows Server 2022Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Microsoft Windows Server version 1709N N N N N N N N N N N N N N N N N N Microsoft Windows Server version 1803N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 6.10N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 6.9N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 7.3N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 7.4N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 7.5N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 7.6N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 7.7N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 7.8N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 7.9Y N N N N N N N N N N N Y Y Y N N Y Red Hat Enterprise Linux 8.0N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 8.1N N N N N N N N N N N N N N N N N N Red Hat Enterprise Linux 8.2N N N N N N N N N N N N Y Y Y N N Y Red Hat Enterprise Linux 8.3N N N N N N N N N N N N Y Y Y Y Y Y Red Hat Enterprise Linux 8.4Y N N N N N N N N N N N Y Y Y Y Y Y Red Hat Enterprise Linux 8.5Y N N N N N N N N N N N Y Y Y Y Y Y Red Hat Enterprise Linux 8.6Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.7Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.8Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.9Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 9.0Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y YS E 455 V S R 630 V S R 635 V S R 645 V S R 650 V S R 655 V S R 665 V S R 675 V S R 850 V S R 860 V S R 630 V S R 650 V S R 670 V S R 850 V S R 860 V S R 635S R 645S R 655S R 665123S E 450S E 455 V 3S R 630 V 3S R 635 V 3S R 645 V 3S R 650 V 3S R 655 V 3S R 665 V 3S R 675 V 3S R 850 V 3S R 860 V 3S T 650 V 3S R 630 V 2S R 650 V 2S R 670 V 2S R 850 V 2S R 860 V 2S T 650 V 2Red Hat Enterprise Linux 9.1Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 9.2Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 9.3Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 12 SP3N N N N N N N N N N N N N N N N N N SUSE Linux Enterprise Server 12 SP4N N N N N N N N N N N N N N N N N N SUSE Linux Enterprise Server 12 SP5N N N N N N N N N N N N Y Y Y Y Y Y SUSE Linux Enterprise Server 15N N N N N N N N N N N N N N N N N N SUSE Linux Enterprise Server 15 SP1N N N N N N N N N N N N N N N N N N SUSE Linux Enterprise Server 15 SP2N N N N N N N N N N N N Y Y Y Y Y Y SUSE Linux Enterprise Server 15 SP3N N N N N N N N N N N N Y Y Y Y Y Y SUSE Linux Enterprise Server 15 SP4Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 15 SP5Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Ubuntu 18.04.5 LTS N N N N N N N N N N N N Y Y Y N N Y Ubuntu 18.04.6 LTS Y N N N N N N N N N N N N N N N N N Ubuntu 20.04 LTS N N N N N N N N N N N N Y Y N N N N Ubuntu 20.04.5 LTS Y Y N Y Y N Y Y Y N N N N N N N N N Ubuntu 22.04 LTS Y N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y Ubuntu 22.04.2 LTSN Y N N N N N N N N N N N N N N N N VMware vSphere Hypervisor (ESXi) 6.5N N N N N N N N N N N N N N N N N N VMware vSphere Hypervisor (ESXi) 6.5 U1N N N N N N N N N N N N N N N N N N VMware vSphere Hypervisor (ESXi) 6.5 U2N N N N N N N N N N N N N N N N N N VMware vSphere Hypervisor (ESXi) 6.5 U3N N N N N N N N N N N N N N N N N N VMware vSphere Hypervisor (ESXi) 6.7N N N N N N N N N N N N N N N N N N VMware vSphere Hypervisor (ESXi) 6.7 U1N N N N N N N N N N N N N N N N N N VMware vSphere Hypervisor (ESXi) 6.7 U2N N N N N N N N N N N N N N N N N N VMware vSphere Hypervisor (ESXi) 6.7 U3N N N N N N N N N N N N Y N N N N Y VMware vSphere Hypervisor (ESXi) 7.0N N N N N N N N N N N N N N N N N N VMware vSphere Hypervisor (ESXi) 7.0 U1N N N N N N N N N N N N N N N Y Y N VMware vSphere Hypervisor (ESXi) 7.0 U2N N N N N N N N N N N N Y Y Y Y Y Y VMware vSphere Hypervisor (ESXi) 7.0 U3Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y VMware vSphere Hypervisor (ESXi) 8.0Y N Y Y Y Y Y Y N N N N Y Y Y Y Y Y VMware vSphere Hypervisor (ESXi) 8.0 U1Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y VMware vSphere Hypervisor (ESXi) 8.0 U2Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y YOperating systems S E 450S E 455 V 3S R 630 V 3S R 635 V 3S R 645 V 3S R 650 V 3S R 655 V 3S R 665 V 3S R 675 V 3S R 850 V 3S R 860 V 3S T 650 V 3S R 630 V 2S R 650 V 2S R 670 V 2S R 850 V 2S R 860 V 2S T 650 V 2Table 10. Operating system support for ThinkSystem Mellanox ConnectX-6 Lx 10/25GbE SFP28 2-port PCIe Ethernet Adapter, 4XC7A62580 (Part 2 of 2)Operating systems Microsoft Windows 10N N Y N N N N N N N N Microsoft Windows 11N N Y N N N N N N N N Microsoft Windows Server 2016Y Y Y Y Y Y Y Y Y Y Y Microsoft Windows Server 2019Y Y Y Y Y Y Y Y Y Y Y Microsoft Windows Server 2022Y Y Y Y Y Y Y Y Y Y Y Microsoft Windows Server version 1709N N N N N N N N Y N Y Microsoft Windows Server version 1803N N N N N N N N Y N Y Red Hat Enterprise Linux 6.10N N N N N N N N Y Y Y Red Hat Enterprise Linux 6.9N N N N N N N N Y Y Y Red Hat Enterprise Linux 7.3N N N N N N N N Y Y Y Red Hat Enterprise Linux 7.4N N N N N N N N Y Y Y Red Hat Enterprise Linux 7.5NNNN N N N N Y Y YRed Hat Enterprise Linux 7.6Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 7.7Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 7.8Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 7.9Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.0Y NY N Y Y Y Y Y Y YRed Hat Enterprise Linux 8.1Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.2Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.3Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.4Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.5Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.6Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.7Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.8Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.9Y Y Y Y Y Y Y Y N N N Red Hat Enterprise Linux 9.0Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 9.1Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 9.2Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 9.3Y Y Y Y Y Y Y Y N N N SUSE Linux Enterprise Server 12 SP3N N N N N N Y N Y Y Y SUSE Linux Enterprise Server 12 SP4Y N Y N Y Y Y Y Y Y Y SUSE Linux Enterprise Server 12 SP5YYYYY Y Y Y Y Y YS R 635S R 645S R 655S R 665S R 630 (X e o n G e n 2)S R 650 (X e o n G e n 2)S R 850P (X e o n G e n 2)S R 950 (X e o n G e n 2)S R 630 (X e o n G e n 1)S R 650 (X e o n G e n 1)S R 950 (X e o n G e n 1)21111111111111111111111111111TrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®ServerProven®ThinkEdge®ThinkSystem®The following terms are trademarks of other companies:Intel® and Xeon® are trademarks of Intel Corporation or its subsidiaries.Linux® is the trademark of Linus Torvalds in the U.S. and other countries.Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.。
维萨拉HUMICAP温湿度变送器HMT331墙面安装型说明书
2016年3月起执行HMT331 温湿度变送器墙面安装型1234567891011121314151617181920212223维萨拉HUMICAP® 温湿度变送器HMT33010A1价格变送器类型HMT3311墙面安装型探头固定式A带一根短的探头电缆8无附加温度探头0测量参数RH+T ARH+T+Td+Tdf+a+x+Tw+ppm+pw+pws+h+dT B显示无0背光LCD图形显示1供电10...35 VDC, 24 VAC010...35 VDC, 24 VAC 带电源隔离 1普通AC供电 (100....240 VAC)2普通AC供电 (100....240 VAC)，美国标准3普通AC供电 (100....240 VAC)，欧洲标准4普通AC供电 (100....240 VAC)，英国标准5普通AC供电(100....240 VAC) + 澳大利亚标准6外接美国适用的AC适配器（用于美国和加拿大的LAN/WLAN界面） 非IP659输出信号模拟输出通道（通道1，2 和3） 4... 20 mA1模拟输出通道（通道1，2 和3） 0... 20 mA2模拟输出通道（通道1，2 和3） 0... 1 V3模拟输出通道（通道1，2 和3） 0... 5 V4模拟输出通道（通道1，2 和3） 0... 10 V5*RS232串口界面或选择其它通讯模块模拟输出范围无第3模拟输出A通道1，2和3RH (0…100%RH)B B B(根据不同参数）T(温度范围见下表)C C CTd (-20…100ºC)D D DTdf (-20…100ºC) E E Ea (0…600g/m³) F F FTw (0…100ºC)G G Gx (0…500g/kg d.a)H H Hh （-40…1500kJ/kg)J J Jppm (0…5000)K K Kpw (0…100hPa)L L Lpws (0…100hPa)M M MdT (-10…+50ºC)N N N自定义自定参数/单位 Ch1:_____(___) Ch2:____(___) 选择 Ch3:_____(___)X X X自定量程 Ch1:_________ Ch2:_________ 选择 Ch3:___________通道1通道2通道3，如不需要，选择A模拟输出无温度输出A温度范围-40...+60°C B-20...+60°C F如果没有温度0...+60°C K输出，请选择A自定义:_______________________X单位公制1非公制2模块插槽1选项无0继电器输出1RS-485数字串口，带隔离2LAN(以太网）接口＋2米电缆 （RJ45） 请注意下面的*)中解释4WLAN(无线以太网)接口和天线 只适用于短电缆探头型5数据记录模块6模块插槽2选项无0继电器输出1第3模拟输出选择第3通道模拟输出3数据记录模块如果模块插槽1已选数据记录模块，这无法在插槽2再选。
S3610产品介绍
目录第1章产品介绍.....................................................................................................................1-11.1 概述....................................................................................................................................1-11.2 S3610-28TP交换机............................................................................................................1-11.2.1 前面板......................................................................................................................1-11.2.2 后面板......................................................................................................................1-71.2.3 电源系统..................................................................................................................1-71.3 S3610-28P交换机..............................................................................................................1-81.3.1 前面板......................................................................................................................1-81.3.2 后面板....................................................................................................................1-111.3.3 电源系统................................................................................................................1-121.4 S3610-28F交换机............................................................................................................1-121.4.1 前面板....................................................................................................................1-121.4.2 后面板....................................................................................................................1-161.4.3 电源系统................................................................................................................1-161.5 S3610-52P交换机............................................................................................................1-171.5.1 前面板....................................................................................................................1-171.5.2 后面板....................................................................................................................1-181.5.3 电源系统................................................................................................................1-181.6 S3610-52M/S3610-52M-DC交换机.................................................................................1-181.6.1 前面板....................................................................................................................1-181.6.2 后面板....................................................................................................................1-201.7 S3610系列以太网交换机系统特性..................................................................................1-21第2章安装前的准备..............................................................................................................2-12.1 安全注意事项.....................................................................................................................2-12.2 检查安装场所.....................................................................................................................2-12.2.1 温/湿度要求.............................................................................................................2-12.2.2 洁净度要求..............................................................................................................2-22.2.3 抗干扰要求..............................................................................................................2-22.2.4 激光使用安全...........................................................................................................2-22.3 安装工具.............................................................................................................................2-3第3章安装.............................................................................................................................3-13.1 交换机的安装.....................................................................................................................3-13.1.1 安装交换机到19英寸机柜.......................................................................................3-13.1.2 安装交换机到工作台................................................................................................3-53.2 电源线及地线连接..............................................................................................................3-53.2.1 交流电源线的连接....................................................................................................3-53.2.2 直流电源线的连接....................................................................................................3-63.2.3 地线的连接..............................................................................................................3-93.2.4 多电源输入............................................................................................................3-113.3 配置（Console）电缆连接...............................................................................................3-113.3.1 配置电缆................................................................................................................3-113.3.2 配置电缆连接.........................................................................................................3-123.4 可选接口模块安装............................................................................................................3-133.4.1 可选接口模块的安装..............................................................................................3-133.4.2 可选接口模块的拆卸..............................................................................................3-133.5 安装完成后检查................................................................................................................3-14第4章交换机初次上电启动....................................................................................................4-14.1 搭建配置环境.....................................................................................................................4-14.2 连接配置电缆.....................................................................................................................4-14.3 设置终端参数.....................................................................................................................4-14.4 交换机启动.........................................................................................................................4-44.4.1 上电前的检查...........................................................................................................4-44.4.2 上电启动..................................................................................................................4-4第5章 BOOTROM和主机软件的加载.....................................................................................5-15.1 加载方式简介.....................................................................................................................5-15.2 本地加载.............................................................................................................................5-15.2.1 BOOT菜单...............................................................................................................5-25.2.2 通过Console口利用XModem完成加载....................................................................5-35.2.3 通过以太网口利用TFTP完成加载............................................................................5-75.2.4 通过以太网口利用FTP完成加载..............................................................................5-95.3 远程加载...........................................................................................................................5-105.3.1 通过FTP实现远程加载...........................................................................................5-105.3.2 通过TFTP实现远程加载........................................................................................5-12第6章维护与常见故障处理....................................................................................................6-16.1 加载失败的处理..................................................................................................................6-16.2 口令丢失情况下的处理.......................................................................................................6-16.2.1 用户口令丢失...........................................................................................................6-16.2.2 交换机BOOTROM口令丢失....................................................................................6-26.3 电源系统故障处理..............................................................................................................6-26.4 配置系统故障处理..............................................................................................................6-2第7章可选扩展卡..................................................................................................................7-17.1 8端口100Base-FX单模/多模模块.....................................................................................7-17.1.1 模块面板与面板指示灯............................................................................................7-17.1.2 模块接口光纤...........................................................................................................7-1 7.2 8端口10Base-T/100Base-TX模块....................................................................................7-27.2.1 模块面板与面板指示灯............................................................................................7-27.2.2 模块接口电缆...........................................................................................................7-2 7.3 百兆SFP模块接口属性.......................................................................................................7-37.3.1 模块面板与面板指示灯............................................................................................7-37.3.2 百兆SFP模块接口....................................................................................................7-3第1章产品介绍1.1 概述H3C S3610系列以太网交换机是杭州华三通信技术有限公司（以下简称H3C公司）自主开发的一系列L2/L3层线速以太网交换产品，是为要求具备高性能、较大端口密度且易于安装的网络环境而设计的智能型可网管交换机。
西门子 S7-1200 功能安全手册 - 设备手册说明书
SIMATICS7S7-1200 功能安全手册设备手册Siemens AGDigital IndustriesⓅ 10/2022 本公司保留更改的权利 Copyright © Siemens AG 2022. 保留所有权利法律资讯警告提示系统为了您的人身安全以及避免财产损失，必须注意本手册中的提示。
人身安全的提示用一个警告三角表示，仅与财产损失有关的提示不带警告三角。
警告提示根据危险等级由高到低如下表示。
危险表示如果不采取相应的小心措施，将会导致死亡或者严重的人身伤害。
警告表示如果不采取相应的小心措施，可能导致死亡或者严重的人身伤害。
小心表示如果不采取相应的小心措施，可能导致轻微的人身伤害。
注意表示如果不采取相应的小心措施，可能导致财产损失。
当出现多个危险等级的情况下，每次总是使用最高等级的警告提示。
如果在某个警告提示中带有警告可能导致人身伤害的警告三角，则可能在该警告提示中另外还附带有可能导致财产损失的警告。
合格的专业人员本文件所属的产品/系统只允许由符合各项工作要求的合格人员进行操作。
其操作必须遵照各自附带的文件说明，特别是其中的安全及警告提示。
由于具备相关培训及经验，合格人员可以察觉本产品/系统的风险，并避免可能的危险。
按规定使用 Siemens 产品请注意下列说明：警告Siemens 产品只允许用于目录和相关技术文件中规定的使用情况。
如果要使用其他公司的产品和组件，必须得到 Siemens 推荐和允许。
正确的运输、储存、组装、装配、安装、调试、操作和维护是产品安全、正常运行的前提。
必须保证允许的环境条件。
必须注意相关文件中的提示。
商标所有带有标记符号 ® 的都是 Siemens AG 的注册商标。
本印刷品中的其他符号可能是一些其他商标。
若第三方出于自身目的使用这些商标，将侵害其所有者的权利。
责任免除我们已对印刷品中所述内容与硬件和软件的一致性作过检查。
然而不排除存在偏差的可能性，因此我们不保证印刷品中所述内容与硬件和软件完全一致。
DC10600EW101_1VX1_X(T C N)_2 数据手册说明书
广州大彩光电科技有限公司版权所有版本记录销售与服务广州大彩光电科技有限公司电话：************-601传真：************Email：*************（咨询和支持服务）网站：地址：广州黄埔区（科学城）玉树工业园C栋3楼网络零售官方旗舰店：目录1. 硬件介绍 (1)1.1产品外观 (1)1.2硬件配置 (2)1.3调试工具 (3)2. 产品规格 (4)3. 产品尺寸 (7)4. 引脚定义 (8)5. 可靠性测试 (9)5.1ESD测试 (9)5.1.1执行标准 (9)5.1.2测试环境 (9)5.1.3测试数据 (10)5.2高低温老化测试 (10)5.2.1测试环境 (10)5.2.2测试数据 (11)5.3群脉冲测试 (11)5.3.1执行标准 (11)5.3.2测试环境 (11)5.3.3测试数据 (12)6. 产品定义 (13)7. RS232与TTL电平转换 (14)8. 包装与物理尺寸 (15)9. 产品架构 (16)10. 开发软件 (17)10.1什么是虚拟串口屏 (17)10.2Keil与虚拟串口屏绑定调试 (18)11. 开发文档 (19)12. 免责声明 (20)1. 硬件介绍本章节主要介绍产品的一些外观参考图、硬件配置图和调试所需工具。
1.1 产品外观以下为该尺寸不同型号的外观参考图，如图1-1、图1-2和图1-3所示。
注：未涉及到结构工艺修改或布局大改动，硬件可靠性方面的变更迭代，公司不予对外发起变更，具体以收到的实物为准。
图1-1 10.1寸电阻触摸参考图图1-2 10.1寸电容触摸参考图销售咨询：************-601Email:*************销售咨询：************-601Email:*************图1-3 10.1寸无触摸参考图1.2 硬件配置以下为该产品硬件配置参考图，如图1-4和图 1-5所示。
大华EVS50、70系列网络视频存储服务器
Source（受限制电源）的额定电压供电，具体供电要求以设备标签为准。 请将 I 类结构的产品连接到带保护接地连接的电网电源输出插座上。 如果使用电源插头或器具耦合器等作为断开装置，请保持断开装置可以方便的操作。
系统使用须知 III
目录
前言 ............................................................................................................................................................................I 重要安全须知 .......................................................................................................................................................... II 系统使用须知 .........................................................................................................................................................III 1 概述 ....................................................................................................................................................................... 1
H3C报价
37500 90000 120000 75000 20000
H3C PSR650A 交流电源模块,650W H3C PSR650A 直流电源模块,650W
400口万兆以太网XFP光接口模块 15000 H3C WX6103-1端口万兆以太网XFP光接口模块 10000 无线控制器license费用-管理128AP
16/24个10/100/1000M全双工线速交换端口 1020/1130 16/24个10/100/1000M全双工线速交换端 口，4个MiNiGBIC插槽 24/48个10//100M端口，2个SFP插槽(后2 个电口和SFP复用) 8/24个10/100Base-TX,2个Base-TX与 100Base-F2，SFP 8个10/100Base-T，1个10/100//1000BaseT与1000Base-X，SFP 16个10/100Base-T，1个 10/100//1000Base-T与1000Base-X，SFP 24个10/100Base-T，1个 10/100//1000Base-T与1000Base-X，SFP 8/16个10/100Base-T，1个模块插槽 24个10/100Base-T，1个模块插槽 24个10/100Base-TX,2个千兆SFP上行口， 2个10/100//1000Base-T 24个10/100Base-TX,4个千兆SFP上行口， 2个10/100//1000Base-T 48个10/100Base-TX,4个千兆SFP上行口， 2个10/100//1000Base-T 24个10/100Base-TX,4个千兆SFP上行口， 2个10/100//1000Base-T 48个10/100Base-TX,4个千兆SFP上行口， 2个10/100//1000Base-T 2150/2450 850/2600 690/1250 1300 2050 2250 1300/2000 2550 4400 4900 9000 6700 11000
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
盲点监测
• 盲点监测功能： > 引起驾驶员注意盲点区域车辆
–警告灯一直点亮直到车辆驶离监测区域为止 …
盲点监测
• 盲点监测功能： > 引起驾驶员注意盲点区域车辆
–警告灯一直点亮直到车辆驶离监测区域为止 ...
盲点监测
• 盲点监测功能： > 引起驾驶员注意盲点区域车辆
–一旦车辆完全驶离监测区域，警告灯就会熄
盲点监测
• 故障码存储在两个盲点监测模块里 • 只提供左侧模块配件 > 右侧模块需用路虎专用诊断设备进行配置 > 左侧模块无需配置 • 使用路虎专用设备进行标定从而可以下载升级程序
盲点监测
• 当车辆驶入盲点区域时，车门后 视镜里的黄色警告灯亮 • 只能识别即将驶过车辆但不能记 录 • 雷达模块/传感器监测所有盲点 区域移动车辆。
盲点监测
• 盲点监测功能： > 引起驾驶员注意盲点区域车辆
监测区域
后视镜监测 指示灯
盲点监测
• 盲点监测功能： > 引起驾驶员注意盲点区域车辆
– 一个车辆从左侧正接近我们驾驶的车辆…
报警设备
盲点监测
盲点监测
• 雷达盲点监测系统的组成是： > 左侧和右侧车门后视镜警告灯 > 左侧和右侧盲点监测模块。
盲点监测
1. 蓄电池 2. 左侧车门后视镜 3. 右侧车门后视镜 4. 右侧控制模块 5. 后保险丝盒 6. CJB（中央保险丝盒） 7. 左侧控制模块
盲点监测
• 两个监测雷达，每个都是由雷达表面和电子模块组成的独立元件 • 黄色警告灯显示在车门后视镜上 • 当系统刚启动时，它会执行自检 • 直到车速达到16公里/小时模块才启动。
灭
盲点监测
• 盲点监测功能： > 引起驾驶员注意盲点区域车辆
–两侧功能完全一样
盲点监测
• 盲点监测功能： > 引起驾驶员注意盲点区域车辆
– 两侧功能完全一样
盲点监测
• 盲点监测系统监测任何以正向速度移动物体 • 监测距离车门后视镜横向2.5米，模块后部7米 • 系统发出雷达脉冲并分析反射波，识别任何进入盲点区域移动物体 • 警告灯位于车门后视镜最外侧表面。
盲点监测
• 报警图标 • 系统状态报警亮点 • 二极管点亮顺序： > 黄色警告灯长亮-系统工作，车 辆在盲点区域检测 > 警告灯不亮-没有在盲点区域检 测到车辆，系统工作。
盲点监测
• 系统有工作限制，在某种工作条件下-黄色警告灯常亮 • 系统工作限制: > 模块雷达表面周围区域必须没有金属物质 > 车速达到16公里/小时以上速度系统工作 > 如果车辆安装许可挂车系统不工作 > 当选择倒档或驻车档时系统不工作
盲点监测
• 系统如不能启动或有故障会通过以下方式通知驾驶员： > 雷达信号受阻或失真：
• 黄色警告灯常亮，同时‘blind spot monitoring blocked’信息会显示在信息中心
> 雷达系统故障:
• 黄色警告灯常亮， 同时‘blind spot monitoring not available’信息会显示在信息中心 > 如是通讯网络故障，警告灯不会点亮测
• 盲点监测功能： > 引起驾驶员注意盲点区域车辆
– 当该车辆进入左侧监测区域，左侧警告指
示灯就会点亮...
盲点监测
• 盲点监测功能： > 引起驾驶员注意盲点区域车辆
– 警告灯一直点亮直到车辆驶离监测区域为止 …
盲点监测
• 盲点监测功能： > 引起驾驶员注意盲点区域车辆
–警告灯一直点亮直到车辆驶离监测区域为止 …